1.

Car Network(C-NET)
In case of C-NET, SW3 - Pin 2 of DOC-200 PCB always must be OFF position.

Because SW1 - Pin 8 of DCL-240 PCB and SW3 - Pin 8 of DOR-230PCB are Terminal
resistor of C-NET
Control Panel

DOC-200 PCB DOR-230 PCB

MA Connector
SW3
ON
OFF
1 2
Pin 1:G-NET Terminal
Resistor
Pin 2:C-NET Terminal
Resistor

SW3
ON
OFF
1 2 3 4 5 6 7 8
Traveling Pin 8:C-NET Terminal Resistor
Cable

Terminal Resistor ON :

Terminal Resistor OFF:

DCL-240 PCB
SW1
ON
OFF
1 2 3 4 5 6 7 8
Pin 8:C-NET Terminal Resistor

Car(OPB)
2. Hall Network(G-NET)
2.1 Hall Call Type(DHL-270 PCB SW1)
SW1
2.1.1 "K" Type : General Hall Call
ON
K type : For Front side(Door)
OFF
(Simplex, Duplex(First Hall line), Group control)
1 2 3 4
Hall Button Mic --> HU/HD(DHL-270)

SW1
2.1.2 "L" Type : General Hall Call
ON
For Front side (Duplex - Second Hall line)
OFF
For Rear side (Simplex, Duplex)
1 2 3 4
Hall Button Mic --> HU/HD(DHL-270)

SW1
2.1.3 "M" Type : Special Hall Call
ON
For Disable & Group control rear side
OFF
Hall Button Mic --> HUC/HDC(DHL-270)
1 2 3 4

2.1.4 "N" Type : Special Hall Call

SW1
For VIP Hall Button
ON
Hall Button Mic --> HUC/HDC(DHL-270)
OFF
1 2 3 4

*In case of Rear side, Pin No.1 must be ON position

2.2 Terminal Resistor

Pin No.4 of SW1 is a terminal resistor

At the bottom floor of all Hall lines , Pin 4 must be ON position.(Simplex, Duplex, Group Control)

In case of the others, their normal position is OFF

SW1(DHS-270 PCB)

ON

OFF
1 2 3 4

ON:Rear side OFF:Front side

Terminal Resistor
3. Non-Through Type Network
3.1 Simplex Hall Network
1 Hall line(General Hall Call)

DOC-200
SW3(DOC-200 PCB)
ON
OFF
1 2
HA(Hall line)
Pin 1:G-NET Terminal Resistor : ON
Pin 2:C-NET Terminal Resistor : OFF
HU
DHL #64
HD

HU
DHL #63
HD

SW1(DHL-270 PCB)
ON
OFF
1 2 3 4

HU
DHL #3
HD

HU
DHL #2
HD

SW1
ON HU
DHL #1
OFF HD
1 2 3 4

Terminal Resistor

"K" Type Hall line

3.2 Duplex Hall Network
3.2.1 1 Hall line(General Hall Call)

No.1 No.2

DOC-200 HP line DOC-200

SW3 40T2:21~32 SW3
ON ON
OFF OFF
1 2 1 2
Pin 1:G-NET Terminal Resistor : OFF Pin 1:G-NET : ON
Pin 2:C-NET Terminal Resistor : OFF Communication line Pin 2:C-NET : OFF
40T2:37 & 38

HU
DHL #64
HD

HU
DHL #63
HD

SW1
ON
OFF
1 2 3 4

DHL #3
HU
HD

HU
DHL #2
HD

SW1
ON
HU
OFF DHL #1
HD
1 2 3 4

Terminal Resistor

"K" Type Hall line

3.2.2 2 Hall line(General Hall Call)

No.1 No.2

DOC-200 HP line DOC-200

SW3 40T2:21~32 SW3
ON ON
OFF OFF
1 2 1 2
Pin 1:G-NET : OFF Pin 1:G-NET OFF
Pin 2:C-NET : OFF Communication line Pin 2:C-NET OFF
40T2:37 & 38

HU HU
DHL #64 DHL #64
HD HD

HU HU DHL #63
DHL #63
HD HD

SW1 SW1
ON ON
OFF OFF
1 2 3 4 1 2 3 4

DHL #3
HU HU DHL #3
HD HD

HU HU DHL #2
DHL #2
HD HD

SW1 SW1
ON ON
HU HU
OFF DHL #1 DHL #1 OFF
HD HD
1 2 3 4 1 2 3 4

Terminal Resistor Terminal Resistor

"K" Type Hall line "L" Type Hall line

In case of 2 of Hall line in Duplex, there is no trouble in their function even they was set by "K"-Type all.

But if Hall node communication error occurs, Control Panel could not check that which Hall line is in
bad condition.
3.2.3 2 Hall line(General + Special Hall Call)

No.1 : General E/L, No.2 : Disable E/L

1st Hall line : For General, 2nd Hall line : For Disable

No.1 No.2

DOC-200 HP line DOC-200

SW3 40T2:21~32 SW3
ON ON
OFF OFF
1 2 1 2
Pin 1:G-NET : OFF Pin 1:G-NET OFF
Pin 2:C-NET : OFF Communication line Pin 2:C-NET OFF
40T2:37 & 38

HU HUC DHL #64

DHL #64
HD HDC

HU HUC DHL #63

DHL #63
HD HDC

SW1 SW1
ON ON
OFF OFF
1 2 3 4 1 2 3 4

DHL #3
HU HUC DHL #3
HD HDC

HU HUC DHL #2
DHL #2
HD HDC

SW1 SW1
ON ON
HU HUC
OFF DHL #1
HD HDC
DHL #1 OFF
1 2 3 4 1 2 3 4

Terminal Resistor Terminal Resistor

"K" Type Hall line "M" Type Hall line

3.2.4 2 Hall line(General + Special Hall Call)

No.1 : General E/L, No.2 : VIP E/L

1st Hall line : For General 2nd Hall line : For VIP

No.1 No.2

DOC-200 HP line DOC-200

SW3 40T2:21~32 SW3
ON ON
OFF OFF
1 2 1 2
Pin 1:G-NET : OFF Pin 1:G-NET OFF
Pin 2:C-NET : OFF Communication line Pin 2:C-NET OFF
40T2:37 & 38

HU HUC DHL #64

DHL #64
HD HDC

HU HUC DHL #63

DHL #63
HD HDC

SW1 SW1
ON ON
OFF OFF
1 2 3 4 1 2 3 4

DHL #3
HU HUC DHL #3
HD HDC

HU HUC DHL #2
DHL #2
HD HDC

SW1 SW1
ON ON
HU HUC
OFF DHL #1 DHL #1 OFF
HD HDC
1 2 3 4 1 2 3 4

Terminal Resistor Terminal Resistor

"K" Type Hall line "N" Type Hall line

4. Through Type Network
4.1 1 Hall line(General Hall Call)

DOC-200
SW3
ON
OFF
1 2
Pin 1:G-NET ON HA(Hall line)
Pin 2:C-NET OFF

Front Side(Door) Rear Side(Door)

HU
DHL #7
HD

HU
DHL #6
HD

HU
DHL #5
SW1 HD
ON
OFF
1 2 3 4
HU
DHL #4
HD
Front side

HU
DHL #3
HD

HU
DHL #2
HD
Terminal Resistor
SW1
HU
ON
DHL #1
HD OFF
1 2 3 4

Rear side

"K" Type Hall line "L" Type Hall line

4.2 2 Hall line(General Hall Call)

DOC-200
SW3
ON
OFF
1 2
Pin 1:G-NET OFF HA(Front Hall line) HAR(Rear Hall
Pin 2:C-NET OFF line)

Front Side(Door) Rear Side(Door)

DHL #8
HU
HD

HU
DHL #7
HD

SW1
HU ON
DHL #6
HD
OFF
1 2 3 4

SW1
ON HU
DHL #5
OFF HD
1 2 3 4

DHL #4 HU
HD

HU
DHL #3
HD

SW1
ON
HU
DHL #2 OFF
HD
1 2 3 4

SW1
ON
HU
OFF HD
DHL #1
1 2 3 4

"K" Type Hall line "L" Type Hall line

5. Group Control Network
5.1 General Hall Call

1 Grpup Control Panel & 3 E/L(2 Hall line)

DGS-700
2 General Hall Call("K"-Type)
SW2-IO-SW1 SW1-IO-SW2

1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8

SW3 TERM SW3

Communication line
1 2 1 2 3 4 5 6 7 8 1 2
SW3 SW3 40T2:37 & 38 SW3

HP line
1 2 40T2:21~32 1 2 1 2 Operating Interface Standby
DOC-200 DOL-200 DOC-200
No.1 No.2 No.3
DOC-200 DOC-200 DOC-200
ME Mic MD Mic
ME Mic
4 wire 4 wire 2 wire

SW5 SW5

1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
SW6 SW6

1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
HA

HP HA HFP HFP HP HA HFP

HF HF
Other Floors
SW2 HF1 SW2 HF1 HF
SW1 HF2 HFU HFU SW1 HF2 HFU
HUC HU HFD HFD HUC HU HFD SW1
HDC HD HDC HD ON
HI1 HI2 HI1 HI2
OFF
1 2 3 4

SW2 : Floor ID

IND IND IND

No.1 No.2 No.3

 HP HA HFP HFP HP HA HFP
HF HF
Bottom Floor
SW2 HF1 SW2 HF1 HF
SW1 HF2 HFU HFU SW1 HF2 HFU
HUC HU HFD HFD HUC HU HFD SW1
HDC HD HDC HD ON
HI1 HI2 HI1 HI2
OFF
1 2 3 4

SW2 : Floor ID

IND IND IND

No.1 No.2 No.3

"K" Type Hall line

* SW2-IO-SW1 & SW1-IO-SW2(DGS-700 / DOL-200 PCB)

These Dip switches are for the indicator setting of 1st Hall line & 2nd Hall line

SW2-IO-SW1 : For 1st Hall line SW1-IO-SW2 : For 2nd Hall line
1 2 4 8 1 2 4 8 1 2 4 8 1 2 4 8
ON ON
OFF OFF
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
HI1(DHL-270) HI2(DHL-270) HI1(DHL-270) HI2(DHL-270)

No.1 E/L No.2 E/L No.3 E/L

Indicator Indicator Indicator

* SW1 & SW2(DGS-700 / DOL-210 "A" PCB)

These Dip switches are for the indicator setting of 3rd Hall line & 4th Hall line
SW1 : For 3rd Hall line SW2 : For 4th Hall line
1 2 4 8 1 2 4 8 1 2 4 8 1 2 4 8
ON ON
OFF OFF
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8

HI1(DHL-270) HI2(DHL-270) HI1(DHL-270) HI2(DHL-270)

Indicator Indicator Indicator Indicator

connection connection connection connection
Lift No. ID Lift No. ID Lift No. ID Lift No. ID
* SW1 & SW2(DGS-700 / DOL-210 "B" PCB)

These Dip switches are for the indicator setting of 5th Hall line & 6th Hall line

SW1 : For 5th Hall line SW2 : For 6th Hall line

1 2 4 8 1 2 4 8 1 2 4 8 1 2 4 8
ON ON
OFF OFF
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
HI1(DHL-270) HI2(DHL-270) HI1(DHL-270) HI2(DHL-270)

Indicator Indicator Indicator Indicator

connection connection connection connection
Lift No. ID Lift No. ID Lift No. ID Lift No. ID

* Apply DOL PCB as below table in accordance with hall line number,

Application of PCB
Hall line No.
DOL - 200 DOL - 210 "A" DOL - 210 "B"

1 ~ 2 Hall line o x x
3 ~ 4 Hall line o o x
5 ~ 6 Hall line o o o

*TERM SW(DGS-700 / DOL-200 PCB)

ON
OFF
1 2 3 4 5 6 7 8

Terminal Resistor for 6th Hall line(Set : ON)

Terminal Resistor for 5th Hall line(Set : ON)

Terminal Resistor for 4th Hall line(Set : ON)

Terminal Resistor for 3rd Hall line(Set : ON)

Terminal Resistor for 2nd Hall line(Set : ON)

Terminal Resistor for 1st Hall line(Set : ON)
5.2 Special Hall Call(Disable)

1 Grpup Control Panel & 3 E/L(3 Hall lines)

2 General Hall Call("K"-Type) + 1 Disable("M"-Type)

No.1 No.2 No.3 DGS-700

DOC-200 DOC-200 DOC-200 G.C.P

HU HU HUC DHL #64

DHL #64 DHL #64
HD HD HDC

HU HU HUC DHL #63

DHL #63 DHL #63
HD HD HDC

SW1 SW1

1 2 3 4 1 2 3 4

HU HU HUC
DHL #3 DHL #3 DHL #3
HD HD HDC

HU HU HUC DHL #2
DHL #2 DHL #2
HD HD HDC

SW1 SW1

HU HU HUC
DHL #1 DHL #1 DHL #1
HD HD HDC
1 2 3 4 1 2 3 4

"K" Type Hall line "M" Type Hall line

5.3 Special Hall Call(VIP)

1 Grpup Control Panel & 3 E/L(3 Hall lines)

2 General Hall Call("K"-Type) + 1 VIP("N"-Type)

No.1 No.2 No.3 DGS-700

DOC-200 DOC-200 DOC-200 G.C.P

HU HU HUC DHL #64

DHL #64 DHL #64
HD HD HDC

HU HU HUC DHL #63

DHL #63 DHL #63
HD HD HDC

SW1 SW1

1 2 3 4 1 2 3 4

HU HU HUC
DHL #3 DHL #3 DHL #3
HD HD HDC

HU HU HUC DHL #2
DHL #2 DHL #2
HD HD HDC

SW1 SW1

HU HU HUC
DHL #1 DHL #1 DHL #1
HD HD HDC
1 2 3 4 1 2 3 4

"K" Type Hall line "N" Type Hall line

5.4 Through Type Hall Call

1 Grpup Control Panel & 3 E/L(3 Hall lines)

2 Front Hall Call("K'-Type) + 1 Rear Hall Call(No.3 : Through Type-"M"-Type)

In case of Through type lift which was controlled by Group Control, set "K"-Type to Front side and
"M"-Type to Rear side as Disable Type.

Rear Door

3.Rear Hall line DGS-700

G.C.P
No.1 No.2 No.3

1.Front Hall line 2.Front Hall line

Front Door

1.Front Hall line 2.Front Hall line 3.Rear Hall line

HU HU HUC DHL #64

DHL #64 DHL #64
HD HD HDC

HU HU HUC DHL #63

DHL #63 DHL #63
HD HD HDC

SW1 SW1

1 2 3 4 1 2 3 4

DHL #3
HU DHL #3 HU HUC DHL #3
HD HD HDC

HU HU HUC DHL #2
DHL #2 DHL #2
HD HD HDC

SW1 SW1

HU HU HUC
DHL #1 DHL #1 DHL #1
HD HD HDC
1 2 3 4 1 2 3 4

"K" Type Hall line "M" Type Hall line

5.5 Hall Call Type Table
Operation Button Type Hall Call Type Hall Button Mic

Front "K" - Type HU/HD

Rear "L" - Type(Pin No.1 of SW1 ON) HU/HD
Simplex
Disable "M" - Type HUC/HDC
VIP "N" - Type HUC/HDC

Front 1st line "K" - Type HU/HD

Front 2nd line "L" - Type HU/HD
Duplex Rear "L" - Type(Pin No.1 of SW1 ON) HU/HD
Disable "M" - Type HUC/HDC
VIP "N" - Type HUC/HDC

Front "K" - Type HU/HD

Group Rear "M" - Type(Pin No.1 of SW1 ON) HUC/HDC

Control Disable "M" - Type HUC/HDC

DGS-700 VIP "N" - Type HUC/HDC

Rear * Trough type Lift - "L" - Type(Pin No.1 of SW1 ON) HU/HD
+
Disable Disable type lift - "M" - Type HUC/HDC

* Note : The through type and disable type options cannot be configured in one lift.
So, one lift can be a thrught type, another lift can be a disable type.

In case of Through type lift which was controlled by Group Control, set "K"-Type to Front side and
"M"-Type to Rear side as disable type. But if Disable and Through type are applied together in one

Group Control, set "M"-Type to disable lift (front) and "L"-Type to Through type(rear).