Scribd Logo
Upload

Welcome to Scribd!

  • 361 views

    Macmat R-Erosion Control Mat

    Uploaded by

    felixjose
    MacMat(r) r is a three dimensional, permanent geomat that provides surface reinforcement, stops erosion and promotes revegetation. Integral steel mesh reinforces the geomat, significantly increasing its tensile strength and shear resistance capacity. Panels can be 'butt-jointed' together using fixing rings or lacing wire.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Macmat R-Erosion Control Mat

    Uploaded by

    felixjose
    361 views4 pages
    MacMat(r) r is a three dimensional, permanent geomat that provides surface reinforcement, stops erosion and promotes revegetation. Integral steel mesh reinforces the geomat, significantly increasing its tensile strength and shear resistance capacity. Panels can be 'butt-jointed' together using fixing rings or lacing wire.

    Original Title

    00109

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    MacMat(r) r is a three dimensional, permanent geomat that provides surface reinforcement, stops erosion and promotes revegetation. Integral steel mesh reinforces the geomat, significantly increasing its tensile strength and shear resistance capacity. Panels can be 'butt-jointed' together using fixing rings or lacing wire.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    361 views4 pages

    Macmat R-Erosion Control Mat

    Uploaded by

    felixjose
    MacMat(r) r is a three dimensional, permanent geomat that provides surface reinforcement, stops erosion and promotes revegetation. Integral steel mesh reinforces the geomat, significantly increasing its tensile strength and shear resistance capacity. Panels can be 'butt-jointed' together using fixing rings or lacing wire.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    MacMat R Erosion Control Mat

    Erosion Protection

    Maccaferri Erosion Protection


    Erosion of soil from embankments and channels becomes critical when it results in damage to infrastructure or leads to the pollution of watercourses. Relying on vegetation growth alone to provide surface protection is unreliable as it is difficult to achieve 100% vegetation coverage, leaving exposed areas vulnerable to erosion.
    MacMat R uses: Erosion control & channel lining Surface reinforcement with soil nailing Lids for Gabions & Reno Mattresses Reinforcing vegetation and root systems

    Maccaferri MacMat R is a three dimensional, permanent geomat that provides surface reinforcement, stops erosion and promotes revegetation. An integral steel mesh reinforces the geomat, significantly increasing the tensile strength of the mat, enhancing its erosion protection and shear resistance capacity when compared to un-reinforced erosion mats. MacMat R consists of a matrix of UV stabilized polymer fibres, extruded onto PVC coated and galvanised steel mesh during the manufacturing process to form a unique, onepiece mat for easy installation. Performance reliability As vegetation alone cannot offer long-term reliability, its performance should not be relied upon in designs. In contrast, the engineered characteristics of MacMat R enables designers to indemnify erosion protection solutions.

    Vegetation establishment MacMat R is plant friendly. It physically protects vulnerable soil surfaces, reducing erosion and encouraging vegetation establishment. MacMat R easily accepts hydroseeding and shrub planting where more rapid colonisation is required. Low wastage Unlike un-reinforced geomats, adjacent panels of MacMat R do not need to be overlapped. The integral steel mesh means panels can be butt-jointed together using fixing rings or lacing wire.

    Maccaferri MacMat R benefits


    Steel mesh reinforcement increases erosion protection & shear resistance BBA Certified reinforcing mesh allows reduced fixing frequency Provides immediate erosion protection of exposed areas Spreads loads between soil-nail heads in slope stabilisation applications Reinforces the root system of plants

    Slope reinforcement with soil nails MacMat R is used extensively on soil nailed slopes, especially within the rail and highway sectors. The soil nails reinforce the overall slope and the MacMat R stabilises the slope surface. Any forces from local surface slip failures are transferred back to the nail heads by the MacMat

    Channel Linings MacMat R is regularly used to line channels and protect canal and channel banks from erosion by water flow. The strength of the mesh reduces the geomat lifting when exposed to aggressive hydraulic flows. Stresses generated at the anchor points are dissipated by the reinforcing mesh. Once installed, the channel is immediately stabilised and vegetation can colonise the channel again (see picture at right).

    Bank-full

    MacMat R stabilised channel Wetland berm Low-flow channel

    2WKHU XVHV
    Gabion and Reno mattress lids Permanent high performance erosion control is often provided by gabions and Reno mattresses. By replacing their mesh lids with MacMat R, silt and seeds within the channel flow become trapped within the 3D geomat, rapidly establishing vegetation. As the steel mesh reinforcement within MacMat R is the same as that used in our gabions and mattresses it can be laced to the structure beneath with confidence.
    New & self colonised plants MacMat R as lid to Reno mattress

    MLWL

    Granular fill Standard stone fill with soil filled voids

    Bidim filter fabric

    PVC coated Reno mattress with standard fill

    MACMAT R TECHNICAL DATA


    Geomat type Mesh Type Corrosion type BBA Approval Connection Nominal Thickness (at 2 kPa) Roll Size Mass per m2 A 3D geomat of entangled UV stabilised polypropylene monofilaments, heat bonded at contact points with void space >90%. Double twist hexagonal woven mesh, 60 x 80mm aperture. 2.2mm wire dia. (3.2mm dia including PVC coating). Selvedge wire = 2.7mm dia (3.7mm o/a) to BS EN 10218-2 & BS EN 10223-3 Galfan (95% Zn, 5% Al Alloy + Mischmetals) coating to BS EN 10244-2 Class A with an extruded grey PVC coating of mean wall thickness of 0.5mm Maccaferri hexagonal wire mesh is BBA certified for up to 120 year design life. Agrment Certificate No. 95/3141 All joints and connections shall be formed with continuous 2.2mm PVC Galfan coated lacing wire and/ or high tensile 3mm diameter Stainless Steel C rings. 12mm 2m x 25m 1,970 g/m
    2

    Tensile Strength Roll Weight Density

    35kN/m Machine Direction 98 kg 900 kg/m3

    Maccaferri Service:
    The level of design support, technical advice and on-site assistance you have come to expect from Maccaferri is also available with Maccaferri MacMat R. For technical detail on this, or any of our wide range of solutions engineered for the environment, please contact your local Maccaferri office.
    Maccaferri Ltd - Head Office
    7600 The Quorum, Oxford Business Park, North, Garsington Road, Oxford, OX4 2JZ Tel: 01865 770555 Fax: 01865 774550 Email: [email protected]

    Area offices
    Perth: T: 01738 621317 F: 01738 442283 Belfast: T: 028 9026 2830 F: 028 9026 2849 Dublin: T: 01 8851662 F: 01 8851601 E: [email protected] E: [email protected] E: [email protected] Oxford, Perth, Belfast

    Web: www.maccaferri.co.uk

    Web: www.maccaferri.ie

    CopyrightMaccaferri Ltd 2006

    You might also like