Scribd Logo
Upload

Welcome to Scribd!

  • 31 views

    1 Footing Plan PDF

    Uploaded by

    114 Gopal jagtap
    The document provides general notes for a structural drawing including: 1) The drawing is only responsible for the structural soundness and not execution. 2) All dimensions are in mm unless specified. 3) Reinforcement cover shall be a minimum of 40mm for columns and 50mm for footings. 4) Maximum column heights without bracing are 4000mm for 230mm wide columns, 3400mm for 200mm wide columns, and 5000mm for 300mm wide columns.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    1 Footing Plan PDF

    Uploaded by

    114 Gopal jagtap
    31 views1 page
    The document provides general notes for a structural drawing including: 1) The drawing is only responsible for the structural soundness and not execution. 2) All dimensions are in mm unless specified. 3) Reinforcement cover shall be a minimum of 40mm for columns and 50mm for footings. 4) Maximum column heights without bracing are 4000mm for 230mm wide columns, 3400mm for 200mm wide columns, and 5000mm for 300mm wide columns.

    Original Title

    1 footing plan.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides general notes for a structural drawing including: 1) The drawing is only responsible for the structural soundness and not execution. 2) All dimensions are in mm unless specified. 3) Reinforcement cover shall be a minimum of 40mm for columns and 50mm for footings. 4) Maximum column heights without bracing are 4000mm for 230mm wide columns, 3400mm for 200mm wide columns, and 5000mm for 300mm wide columns.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    31 views1 page

    1 Footing Plan PDF

    Uploaded by

    114 Gopal jagtap
    The document provides general notes for a structural drawing including: 1) The drawing is only responsible for the structural soundness and not execution. 2) All dimensions are in mm unless specified. 3) Reinforcement cover shall be a minimum of 40mm for columns and 50mm for footings. 4) Maximum column heights without bracing are 4000mm for 230mm wide columns, 3400mm for 200mm wide columns, and 5000mm for 300mm wide columns.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    *NOTE: WE ARE ONLY RESPONSIBLE FOR SOUNDNESS OF STRUCTURE

    REFLECTED THROUGH THE DRAWING ONLY & NOT FOR EXECUTION.


    GENERAL NOTES:
    1. THIS DRAWING SHALL BE READ IN CONJUNCTION WITH ALL STRUCTURAL,
    ARCHITECTURAL, SERVICES DRAWINGS. AND SPECIFICATIONS.
    2. FOLLOW WRITTEN DIMENSIONS ONLY DO NOT SCALE THE DRGS.
    3. ANOMALIES IN THE DRAWINGS. SHALL BE BROUGHT TO THE NOTICE OF
    THE STRUCTURAL CONSULTANT AND ARCHITECT BEFORE EXECUTION.
    4. SEPARATE DETAIL IF ANY GIVEN IN ACTUAL WORKING DRAWING WILL
    SUPERSEDE THESE DETAILS.
    5. ALL STRUCTURAL CONCRETE SHOULD BE WEIGH BATCHED, MACHINE
    MIXED & MECHANICALLY VIBRATED.
    6. ALL DIMENSIONS IN THIS DRAWINGS ARE IN MM.(UNLESS SPECIFIED)
    7. CLEAR COVER TO REINFORCEMENT SHALL BE, COVER FOR MODERATE AND
    SEVERE EXPOSURE CONDITION
    * COLUMN = 40 mm, * FOOTING = 50 mm SHOULD BE INCREASED
    * BEAM = 25 mm, * SLAB = 15 mm
    8. MAXIMUM ALLOWABLE HEIGHT OF COLUMN WITHOUT ANY BRACE OR TIE
    a) 230 WIDE-4000mm. b) 200 WIDE-3400mm. c) 300 WIDE-5000mm.
    10.LAP LENGTH WHERE " D " IS DIAMETER OF BAR.
    M20 M25
    LAPING IS NOT ALLOWED IN FOOTING AS ,
    COLUMNS / STRUTS 52xD 46xD WELL AS IN CANTILEVER BEAMS,
    52xD 46xD R/F FOR THESE MUST BE IN SINGLE PIECE.
    BEAM / SLAB
    a) COLUMN BARS SHALL BE LAPPED ONLY IN CENTRAL HALF OF ITS LENGTH.NOT MORE
    THAN 50 % OF THE BARS SHALL BE LAPPED AT ONE SECTION.
    b) AT ANY SECTION OF SLAB/BEAM NOT MORE THAN 50%
    c) BARS TO BE LAPPED & LAPS SHOULD BE STAGGERED.
    *STRUCTURAL LAYOUT OF :-
    10.FOR CANTILEVERS, TOP BARS TO BE ANCHORED BEHIND FOR-70X DIA. OF
    COLUMN AND FOOTING. BARS OR SPAN OF CANTILEVERS - *WHICHEVER IS GREATER
    11.CONCRETING IN STEP FOOTING FOR ALL STEPS SHOULD CAST
    MONOLITHICALLY AT ONCE.
    12.LONG SPAN REINFORCEMENT IN " FOOTINGS" SHALL BE PLACED BELOW
    THE SHORT SPAN REINFORCEMENT SHORT SPAN REINFORCEMENT
    13.CONCRETING IN STEP FOOTING FOR ALL THE STEPS SHOULD CAST
    MONOLITHICALLY AT ONCE.
    14.'T' NOTES TOR STEEL CONFORMING TO GRADE Fe 500 (FY = 500 N/mm2)
    15. FORM WORK SHALL BE REMOVED IN ACCORDANCE WITH IS:456 -2000.

    b < 300 mm
    h1 < 300 mm
    h1 < 300 mm

    MINIMUM
    6MM:75MM
    8MM:80MM
    10MM:100MM LINKS DETAILS
    or 10 d ( SCALE : NTS )
    whichever GREATER

    * TYPICAL FOR
    LINKs and LOOPs
    ( SCALE : NTS )

    You might also like