Turbine Fuel Shut Off Valve

Model 4420E

Typical applications
Developed for use in manual and automatic control
systems:
• Fuel shut off valve for gas turbines in the
10 - 30 MW size range
• Starting air/gas valve
• Vented fuel/gas valve

Key features and benefits

• Less than 100 millisecond close time
• Unique “vent” port
-- No need for separate bleed valves
-- Reduced installation cost Model 4420 Turbine Fuel Shut Off Valve
• 2-way and 2-way vented options
• Open, Closed, or Open/Closed position switch
indication (optional)

Accreditations available
• PED Suitable for Group 1 & 2 gases
(Ensure materials are compatible)
• ATEX II 2G TX X
• Complies with all relevant EU directives
• NACE MR-01-75
• ISO 15156

www.amot.com
Datasheet_4420_Fuel_Shut_Off_Valve_NOV17_Rev7 Page 1
 Turbine Fuel Shut Off Valve - Model 4420E
Contents
Overview ................................................................. 3
Operation ................................................................ 3
Flow Charts ............................................................. 3
Flow coefficient .................................................. 3
2” valve ............................................................ 4
3” valve ............................................................ 5
Valve Characteristics ................................................. 6
Switch options ................................................... 6
Pilot solenoid options .......................................... 6
How to Order ........................................................... 7
Specification ............................................................ 7
Dimensions .............................................................. 8
Maintenance and Service Parts ................................... 9
How to order service kits ..................................... 9
Service kit model number structure ...................... 9
Service parts ..................................................... 10
Contact ................................................................... 12

Datasheet_4420_Fuel_Shut_Off_Valve_NOV17_Rev7 Page 2
 Turbine Fuel Shut Off Valve - Model 4420E
Overview
The Model 4420 has been specifically designed as The 4420 is a stainless steel, single acting, spring
a fuel shutoff valve in gas turbine applications. It’s return, pneumatically actuated valve and is
compact size and quick close time make it ideal for available in both 2-way and 2-way vented versions.
use in gas turbines in the 10 - 30 MW range.

Operation
2-way vented version 2-way version
When pressure is applied to the pilot port, the valve When pressure is applied to the pilot port, the valve
is opened to allow flow to travel from the IN port to is opened to allow the flow to travel from the IN
the OUT port. The VENT port is closed. When the port to the OUT port. When the pilot pressure is
pilot pressure is released, the IN port closes while released, a spring closes the main ports.
the VENT port opens to the OUT port. This venting
relieves pressure within the valve and in the down
stream piping.
The 2-way vented version is ideal for gas turbine
applications because, upon shutdown, it relieves
and vents pressure on the down stream side. This
action eliminates the need for a separate bleed
valve, providing a cost savings and simplified
piping.

Flow Charts
Flow coefficient
Cv is the imperial coefficient. It is defined as the flow rate in Cubic Feet per Hour
Flow coefficient
(ft3/hr) of air at a temperature of 60º Fahrenheit with a pressure drop across the
(calculated)
valve of 1 psi. The basic formula to find a valve’s Cv is shown below:
Size Kv Cv
Q Q = Flow in ft3/hr
2” 72 83 SG(°F+460)
Cv = 1360
Pup DP DP = Pressure drop (psi)
3” 112 130
Pup = Valve supply pressure (psi)
Kv = 0.865 Cv
Q = 1360 Cv Pup DP SG = Specific gravity of gas
Cv = 1.156 Kv (Natural Gas = 0.65 @ 250°F)
SG(°F+460)
Cv = Valve flow coefficient (English units)
2 °F = Temperature in °F
DP = Q SG(°F+460)
1360 Cv Pup

Datasheet_4420_Fuel_Shut_Off_Valve_NOV17_Rev7 Page 3
 Turbine Fuel Shut Off Valve - Model 4420E
Flow Charts Continued
2” valve
2" Flow Chart for Natural Gas (SG = 0.65) @ 120°C
2” Flow Chart for Natural Gas (SG = 0.65) @ 120°C
10 bar 20 bar 30 bar 40 bar
1.4

1.2
(bar)
drop(bar)

1
Pressure drop

0.8
Pressure

0.6

0.4

0.2

0
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 16,000
Flow rate (m /hr)
3

Flow rate (m3/hr)

2" Flow Chart for Natural Gas (SG = 0.65) at 250°F
2” Flow Chart for Natural Gas (SG = 0.65) @ 250°F
200 psi 300 psi 400 psi 500 psi
20
Pressure drop (psi)

15
Pressure drop (psi)

10

0
0 2,000 4,000 6,000 8,000 10,000
Flow rate
Flow rate (SCFM)
(SCFM)

Datasheet_4420_Fuel_Shut_Off_Valve_NOV17_Rev7 Page 4
 Turbine Fuel Shut Off Valve - Model 4420E
Flow Charts Continued
3” valve
3" Flow Chart for Natural Gas (SG = 0.65) @ 120°C
3” Flow Chart for Natural Gas (SG = 0.65) @ 120°C
10 bar 20 bar 30 bar 40 bar
1.4

1.2
(bar)
(bar)

1
drop

0.8
Pressuredrop

0.6
Pressure

0.4

0.2

0
0 4,000 8,000 12,000 16,000 20,000 24,000
Flow rate (m33/hr)
Flow rate (m /hr)

3"
3”Flow
FlowChart
Chartfor
forNatural
NaturalGas
Gas(SG
(SG==0.65)
0.65)at@250°F
250°F
200 psi 300 psi 400 psi 500 psi
20

15
Pressure drop (psi)
Pressure drop (psi)

10

0
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000
Flow rate (SCFM)
Flow rate (SCFM)

Datasheet_4420_Fuel_Shut_Off_Valve_NOV17_Rev7 Page 5
 Turbine Fuel Shut Off Valve - Model 4420E
Valve Characteristics
Switch options
Code Description Approvals
N None
E Open
F Closed CSA Class I, Div. 1, Groups C,D
G Open/Closed
H Open
J Closed UL Class I, Div. 1, Groups C,D
K Open/Closed
P Open
Q Closed ATEX II 2G TX
R Open/Closed

Pilot solenoid options

Code Description Approvals
00 None
02 3-way QE solenoid, SS, 24VDC
03 3-way QE solenoid, SS, 120VDC
04 3-way QE solenoid, SS, 24VDC, QE5
05 3-way QE solenoid, SS, 120VDC, QE5
UL/CSA Class I, Div. 1, Groups C & D
06 3-way QE solenoid, SS, 24VDC, 1301F Regulator
07 3-way QE solenoid, SS, 120VDC, 1301F Regulator
08 3-way QE solenoid, SS, 24VDC, QE5, 1301F Regulator
09 3-way QE solenoid, SS, 120VDC, QE5, 1301F Regulator
10 3-way QE solenoid, SS, 24VDC
11 3-way QE solenoid, SS, 115VDC
12 3-way QE solenoid, SS, 24VDC, QE5
13 3-way QE solenoid, SS, 115VDC, QE5
ATEX II 2G TX
14 3-way QE solenoid, SS, 24VDC, 1301F Regulator
15 3-way QE solenoid, SS, 115VDC, 1301F Regulator
16 3-way QE solenoid, SS, 24VDC, QE5, 1301F Regulator
17 3-way QE solenoid, SS, 115VDC, QE5, 1301F Regulator
20 4-way solenoid, SS, 24VDC
21 4-way solenoid, SS, 120VDC
22 4-way solenoid, SS, 24VDC, QE5
23 4-way solenoid, SS, 120VDC, QE5
UL/CSA Class I, Div. 1, Groups C & D
24 4-way solenoid, SS, 24VDC, 1301F Regulator
25 4-way solenoid, SS, 120VDC, 1301F Regulator
26 4-way solenoid, SS, 24VDC, QE5, 1301F Regulator
27 4-way solenoid, SS, 120VDC, QE5, 1301F Regulator

Datasheet_4420_Fuel_Shut_Off_Valve_NOV17_Rev7 Page 6
 Turbine Fuel Shut Off Valve - Model 4420E
How to Order
Use the table below to select the unique specification of your Model 4420 Turbine Fuel Shut Off Valve.
Example 4420E D H 4 K 02 -AA Code description
Basic model (A)
Basic model (A) 4420E 316 stainless steel housing
Valve size and type (B)
A 2”, 2-way
B 2”, 2-way vented
Valve size and type (B)
C 3”, 2-way
D 3”, 2-way vented
Connection code (C)
K 600 lb. ANSI RF
Connection code (C)
H 300 lb. ANSI RF
Internal material code (D)
Internal material code (D) 4 316 stainless steel spool / PTFE seals / Viton seals
Switch options (E)
For switch options available, refer to the switch options table
Switch options (E) *
on page 6.
Pilot solenoid options (F)
For pilot solenoid options available, refer to the pilot solenoid
Pilot solenoid options (F) **
options table on page 6.
Customer special requirements (G)
-AA Standard (may be omitted)
Customer special requirements (G)
-*** Made-to-order

Specification
Metric units English units
Body and trim material 316 stainless steel
Seal material Viton
Class 600 lb RF flanges 69 bar @ 38°C 1,000 psi @ 100°F
Maximum pressure
Class 300 lb RF flanges 50 bar @ 38°C 720 psi @ 100°F
Temperature -29°C - 204°C -20°F - 400°F
Pilot pressure to actuate 4.1 - 10.3 bar 60 - 150 psi
2” valve ANSI Class 300 or 600 RF flange
3” valve ANSI Class 300 or 600 RF flange
Connections Vent port ½” NPT
Solenoid/position switch conduit ½” NPT
Solenoid inlet port ¼” NPT
2” valve Cv = 83 Kv = 72
Flow coefficient
3” valve Cv = 130 Kv = 112
Close time* Less than 100 ms
Seat leakage ANSI Class VI
Pressure Equipment Directive (PED) Category 4, Suitable for group 1 & 2 liquids
Position switch ratings UL or CSA Class I, Div. 1, Groups A, B, C, D
Solenoid valve ratings UL & CSA Class I, Div. 1, Type H Coil (24 VDC)
2” 38 kg 85 lbs
Net weight
3” 61 kg 135 lbs
European certified position switch and solenoid available by request.
* Contact AMOT for advice on suitable solenoid valves and pilot pressures.
Datasheet_4420_Fuel_Shut_Off_Valve_NOV17_Rev7 Page 7
 Turbine Fuel Shut Off Valve - Model 4420E
Dimensions
Dimensions - inches (mm)

Flange connections
2” 300 lb. 2” 600 lb. 3” 300 lb. 3” 600 lb.
Dimension
Inches mm Inches mm Inches mm Inches mm
L1 5.75” 146 5.75” 146 7.0” 178 7.0” 178
L2 11.5” 292 11.5” 292 14.0” 356 14.0” 356
L3 4.5” 114 4.5” 114 4.5” 114 4.5” 114
H1 6.62” 168 6.62” 168 7.75” 197 7.75” 197
H2 9.12” 232 9.12” 232 10.25” 260 10.25” 260
H3 6.78” 172 6.78” 172 7.25” 184 7.25” 184
H4 2.41” 61 2.41” 61 3.16” 80 3.16” 80
H5 3.56” 90 3.56” 90 4.312” 110 4.312” 110
O 6.5” 165 6.5” 165 8.25” 210 8.25” 210
R 3.62 92 3.62 92 5.0” 127 5.0” 127
C 0.82” 21 1.0” 25 1.06” 27 1.25” 32
C1 0.062” 1.6 0.25” 6 0.06” 1.6 0.25” 6
BH 0.75” 19 0.75” 19 0.88” 22 0.88” 22
BC 5.0” 127 5.0” 127 6.62” 168 6.62” 168

Datasheet_4420_Fuel_Shut_Off_Valve_NOV17_Rev7 Page 8
 Turbine Fuel Shut Off Valve - Model 4420E
Maintenance and Service Parts
Over time, exposure to foreign chemicals and All PTFE seals must be replaced every time that the
particulate matter as well as prolonged operation spool is dismantled, and it is recommended that
at extreme conditions may reduce the effectiveness all O-rings are replaced also. It is recommended
of the valve. At such time, AMOT Turbine Fuel Shut that all O-rings be replaced when the valve is
Off Valves can be restored to original performance dismantled.
simply by installing an AMOT turbine fuel shut
AMOT designs and tests all its products to ensure
off valve service kit. Service kits include all new
that high quality standards are met. For good
seals and seal components required for normal
product life, carefully follow AMOT’s installation and
maintenance.
maintenance instructions; failure to do so could
All seats and seals should be checked annually result in damage to the equipment being protected
for leakage and hardening, and replaced if or controlled.
necessary.
Each time the spool 14 is removed from the valve
it is recommended that the PTFE seals 14A 14B 14C be
replaced. Minor damage or the smallest of cuts
to these seals will cause leakage. Replacement of
the PTFE seals requires disassembly of the valve
spool for which AMOT uses specialized tooling. If
preferred this can be done by AMOT, for contact
details refer to page 12.
How to order service kits
Service kits are available with seals and other parts Refer to the AMOT valve part number that is printed
required to service the valve. Order service kits by on the valve nameplate and the AMOT valve part
the service kit model number, which is identified by number structure on page 7.
the valve size and type code from the AMOT valve
part number.
Service kit model number structure
1) Identify the valve size and type code, located in 2) Use that value in the service kit identification
the Valve size and type (B) section of the AMOT table below to identify the proper service kit
valve part number. required to service your valve.

Service kit identification

Customer special
Valve size and type (B)1 Service kit model number
requirements (G)2
A,B 10339X001
-AA or -***
C,D 10339X002
Examples
Valve part number Service kit model number
4420E A H 4 F 03 -AA 10339X001
4420E C K 4 Q 13 -CZF 10339X002
NOTES:
1
If your valve size and type code does not correspond with the given values, please contact the facility to confirm your
valve size and type code.
2
Letters or numbers in the Customer special requirements (G) section of the AMOT valve part number indicate the unit is
built to special requirements and some of the other code numbers may not be valid. Contact the facility if your Customer
special requirements (G) code differs from -AA to verify which service kit is applicable to your specific Model 4420 valve.

Datasheet_4420_Fuel_Shut_Off_Valve_NOV17_Rev7 Page 9
 Turbine Fuel Shut Off Valve - Model 4420E
Maintenance and Service Parts Continued
Service parts (refer to diagrams on page 11)

Service kit parts

Ref no. Qty. Description

3 1 Vent cover seal

6 1 Lower cylinder seal

7 1 Upper cylinder seal

11 1 Outer piston seal

12 1 Inner piston seal

14A 1 Upper PTFE Seal

14B 1 Middle PTFE Seal

14C 1 Lower PTFE Seal

14D 1 Outer upper spool seal

14E 1 Inner upper spool seal

14F 1 Lower spool seal

14G 1 Upper middle spool seal

14H 1 Lower middle spool seal

15 1 Upper spool seal

16 1 Upper spool back-up ring

18 1 Inner sleeve seal

19 1 Inner sleeve back-up ring

20 1 Outer sleeve seal

21 1 Outer sleeve back-up ring

34 4 Seal

AP 1 Krytox GPL206 grease, 2 oz tube

Datasheet_4420_Fuel_Shut_Off_Valve_NOV17_Rev7 Page 10
 Turbine Fuel Shut Off Valve - Model 4420E
Maintenance and Service Parts Continued
Service parts continued

Datasheet_4420_Fuel_Shut_Off_Valve_NOV17_Rev7 Page 11
 Turbine Fuel Shut Off Valve - Model 4420E
Contact

Americas Europe, Middle East and Africa

AMOT USA AMOT UK

8824 Fallbrook Dr. Western Way
Houston, TX 77064 Bury St. Edmunds
USA Suffolk, IP33 3SZ
England
Tel: +1 (281) 940 1800
Fax: +1 (713) 559 9419 Tel: +44 1284 715739
Email: [email protected] Fax: +44 1284 760256
Email: [email protected]

AMOT Germany
Rondenbarg 25
22525 Hamburg
Germany

Tel: +49 40 8537 1298

Fax: +49 40 8537 1331
Asia Pacific Email: [email protected]

AMOT Shanghai
Bd. 7A, No. 568, Longpan Rd., Malu Jiading
Shanghai 201801
China

Tel: +86 21 5910 4052

Fax: +86 21 5237 8560
Email: [email protected]

www.amot.com

Datasheet_4420_Fuel_Shut_Off_Valve_NOV17_Rev7 Page 12