Fiat Punto Ecu Pinout

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

11-Jan-11

6:11:16 PM

Vehicle diagnosis SIS/CAS


Vehicle FIAT / Punto 60 1.2i.e. / 05/1997 - 08/1999 / Squareback/hatchback limousine
Country of manufacture I
Cubic capacity/Power 1.2 / 43 kW
Motor tag 176 B 4.000
RB key FIA 1276
Sector All
System Engine management / (SPI) IAW 16F.

CONTROL-UNIT TERMINAL ASSIGNMENT

For Fiat Punto 55 with 16 = Ground wire: Engine-temperature


Marelli IAW16F.EB engine management sensor, intake-air temperature
sensor, throttle-valve potentio-
The full terminal assignment is meter, intake-manifold pressure
explained in the following, although sensor, diagnosis plug
not all functions are implemented 17 = Engine ground
in the vehicle. 18 = Solenoid-operated injection valve,
The scope of functions can be seen ground actuation
from the electrical terminal diagram. 19 = Double-spark coil, cylinders 2
and 3, ground actuation

1
Vehicle diagnosis SIS/CAS 11-Jan-11
FIAT / Punto 60 1.2i.e. / 05/1997 - 08/1999 / Squareback/hatchback limousine (FIA 1276) 6:11:16 PM

1 = Double-spark coil, cylinders 1 20 = Stepper coil 1 (stepping motor


and 4, ground actuation for idling-speed regulation)
2 = Stepper coil 1 (stepping motor for 21 = Stepper coil 2 (stepping motor
idling-speed regulation) for idling-speed regulation)
3 = Stepper coil 2 (stepping motor for
idling-speed regulation) 22 = Purge control valve (TEV),
ground actuation
4 = Twin relay, main relay switched 23 = Twin relay, ground actuation of
ground connection electric fuel-pump relay
5 = Not used 24 = AC coupling relay
6 = Engine-management diagnosis lamp 25 = Not used
7 = Communication wire to immobilizer 26 = Not used
control unit (if fitted) 27 = Not used
8 = AC control electronics 28 = Signal, engine-speed/reference-
9 = Not used mark sensor
10 = L-wire/diagnosis plug 29 = Signal, Lambda sensor
11 = Engine-speed/reference-mark sensor 30 = Signal, throttle-valve
signal potentiometer
12 = Lambda sensor signal 31 = Intake-air temperature sensor
13 = Engine-temperature sensor 32 = Signal, intake-manifold
(coolant) pressure sensor
14 = Power supply (5 V): 33 = Not used
Throttle-valve potentiometer and
intake-manifold pressure sensor 34 = Engine ground
35 = Internal engine-management voltage
15 = K-line to diagnosis plug supply from twin relay

You might also like