Scribd Logo
Upload

Welcome to Scribd!

  • 244 views

    AMB4521R0 - 2149 Datasheet

    Uploaded by

    kitticom r
    This document provides specifications for the AMB4521R0 EasyRET Single-Band Tri-Beam Antenna with 3 integrated RCUs. Key details include: 1. It operates within the 1710-2690 MHz frequency range with electrical and mechanical downtilt capabilities. 2. Gain ranges from 19.3 to 21.3 dBi across frequency bands and beams. 3. It has integrated RET controllers to enable remote electrical tilt adjustment via AISG or 3GPP protocols. 4. Additional information on dimensions, weight, wind load ratings, connectors and certifications are provided.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    AMB4521R0 - 2149 Datasheet

    Uploaded by

    kitticom r
    244 views2 pages
    This document provides specifications for the AMB4521R0 EasyRET Single-Band Tri-Beam Antenna with 3 integrated RCUs. Key details include: 1. It operates within the 1710-2690 MHz frequency range with electrical and mechanical downtilt capabilities. 2. Gain ranges from 19.3 to 21.3 dBi across frequency bands and beams. 3. It has integrated RET controllers to enable remote electrical tilt adjustment via AISG or 3GPP protocols. 4. Additional information on dimensions, weight, wind load ratings, connectors and certifications are provided.

    Original Title

    AMB4521R0_2149 Datasheet

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for the AMB4521R0 EasyRET Single-Band Tri-Beam Antenna with 3 integrated RCUs. Key details include: 1. It operates within the 1710-2690 MHz frequency range with electrical and mechanical downtilt capabilities. 2. Gain ranges from 19.3 to 21.3 dBi across frequency bands and beams. 3. It has integrated RET controllers to enable remote electrical tilt adjustment via AISG or 3GPP protocols. 4. Additional information on dimensions, weight, wind load ratings, connectors and certifications are provided.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    244 views2 pages

    AMB4521R0 - 2149 Datasheet

    Uploaded by

    kitticom r
    This document provides specifications for the AMB4521R0 EasyRET Single-Band Tri-Beam Antenna with 3 integrated RCUs. Key details include: 1. It operates within the 1710-2690 MHz frequency range with electrical and mechanical downtilt capabilities. 2. Gain ranges from 19.3 to 21.3 dBi across frequency bands and beams. 3. It has integrated RET controllers to enable remote electrical tilt adjustment via AISG or 3GPP protocols. 4. Additional information on dimensions, weight, wind load ratings, connectors and certifications are provided.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    AMB4521R0

    3MX-1710-2690-22-21i-M-R
    EasyRET Single-Band Tri-Beam Antenna with 3 Integrated RCUs - 1.4m

    Antenna Specifications
    Electrical Properties
    1710 - 2690
    Frequency range (MHz)
    1710 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
    Polarization +45° , -45°
    Electrical downtilt (°) 2 - 12 , continuously adjustable
    at mid Tilt (M beam) 20.5 20.8 20.8 21.3
    over all Tilts (M beam) 20.3 ±0.6 20.6 ±0.5 20.6 ±0.5 21.1 ±0.5
    Gain (dBi)
    at mid Tilt (L and R beam) 19.5 20.3 20.3 20..0
    over all Tilts (L and R beam) 19.3 ±0.6 20.1 ±0.5 20.1 ±0.5 19.8 ±0.5
    Side lobe suppression for first side lobe above
    > 17 > 17 > 17 > 16
    main beam (dB)
    Horizontal 3dB beam width (°) (M beam) 23 ±2 21 ±1.4 20 ±1.2 16 ±0.6
    Horizontal 3dB beam width (°) (L and R beam) 27 ±2 23 ±1.4 20 ±1.2 18 ±0.6
    Vertical 3dB beam width (°) 7.5 ±0.5 7.0 ±0.5 6.2 ±0.5 5.5 ±0.3
    VSWR < 1.5
    Cross polar isolation (dB) Same beam: ≥ 25
    Beam to beam isolation (dB) ≥ 18
    Front to back ratio , ±30° (dB) > 29 > 30 > 28 > 26
    Cross polar ratio (dB) 0° > 17 > 17 > 15 > 15
    Max. power per input (W) 250 (at 50℃ ambient temperature)
    Intermodulation IM3 (dBc) ≤ -153 (2 x 43 dBm carrier)
    Impedance (Ω) 50
    Grounding DC Ground

    1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).


    2. Electrical datasheet in XML format is available.

    Mechanical Properties
    106
    Antenna dimensions (H x W x D) (mm) 1499 x 449 x 115
    Packing dimensions (H x W x D) (mm) 1835 x 510 x 185
    Antenna weight (kg) 23.5
    Clamps weight (kg) 3.6 (2 units)
    Antenna packing weight (kg) 33.8 (Included clamps)
    Mast diameter supported (mm) 50 - 115
    Radome material Fiberglass
    1385
    1499

    Radome colour Light grey


    Operational temperature (℃) -40 .. +65
    Frontal: 775 (at 150 km/h)
    Wind load (N) Lateral: 90 (at 150 km/h)
    Rear side: 870 (at 150 km/h)
    Max. operational wind speed (km/h) 200
    Survival wind speed (km/h) 250
    Connector 6 x 7/16 DIN Female
    Connector position Bottom

    Accessories
    Item Model Description Weight Units per antenna
    Downtilt kit ASMDT0D01 Mechanical downtilt: 0 - 16 ° 2.1 kg 1 (Separate packing)

    1
    AMB4521R0
    3MX-1710-2690-22-21i-M-R
    EasyRET Single-Band Tri-Beam Antenna with 3 Integrated RCUs - 1.4m

    Integrated RET Specifications


    Properties
    RET type Integrated RET
    RET protocols* AISG 2.0 / 3GPP
    Input voltage range (V) 10 - 30 DC
    < 6 (motor activated, 12V)
    Power consumption (W)
    < 1.5 (stand by, 12V)
    Adjustment time (full range) (s) < 65 (typically, depending on antenna type)
    2 x 8 pin connector according to IEC 60130-9
    RET connector
    Daisy chain in: Male / Daisy chain out: Female
    1 2 3 4 5 6 7 8
    Pin assignment according AISG
    DC n/c RS-485B n/c RS-485A DC DC return n/c
    3 (10/350 μs)
    Lightning protection (kA)
    10 (8/20 μs)

    * Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software
    interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function,
    contact Huawei before system installation.
    Standards: UL 60950-1 (Safety), UL 60950-22 (Safety – Equipment installed outdoor), EN 55032 (Emission),
    EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003
    Certification: CE, FCC, IC, RCM

    Integrated RET S/N: HWMxxx..….y1


    HWMxxx..….y2
    HWMxxx..….y3

    y - Yellow

    Pattern sample for reference

    1710 - 2690 MHz 1710 - 2690 MHz 1710 - 2690 MHz


    (y3-30) (y2) (y1+30)
    NOTE

    1. Facilities, such as towers and poles, must bear the weight and wind load of antennas.
    2. HUAWEI ‘s standard brackets and accessories must be used for any installation.
    3. The antenna working environment must meet the requirements specified in the datasheet.
    4. Only qualified personnel are allowed to perform installation. Installation tools and procedures must conform to
    requirements described in the antenna installation guide.

    Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com/antenna
    Any previous datasheet issues become invalid. 2 Issue: 2017-02-27

    You might also like