Enterprise No.

: NO940411696
www.VIKING-life.com

LH-185 MKIII - Lifeboat Davit

TECHNICAL SPECIFICATION

VIKING Norsafe Life-Saving Equipment Norway AS

Tybakken 90, N-4818 Faervik
P.O. Box 115, N-4852 Faervik
Arendal, Norway

VIKING Project No.: TBA VIKING Doc. No.: TSD-0062 Tel: +47 37 05 85 00
Fax: +47 37 05 85 01
Rev. Date: 29.05.2020 Rev. No: 6
E-mail: [email protected]
1. REGULATION AND CERTIFICATION
Applicable rules and regulations In accordance with IMO/ SOLAS requirements, LSA Code
and European Council Directive 2014/90/EU on Marine
Equipment (MED)
Certificate MED
Other certificate Class certificate or flag acceptance on request

2. DAVIT SPECIFICATION
2.1. GENERAL DAVIT
Type Hydraulic Luffing Lifeboat davit
Model LH-185 MKIII
Application Conventional lifeboat handling
Drawing reference G-500070
Execution Hydraulic pivoting davit
Boarding position Inboard on deck level
Operating position From deck and from inside the boat (Gravity lowering)
Davit system weight (Approx.) 11200 kg, davit incl. winch (dry weight)
Safe Working Load (SWL) 20387 kg
Trim / list conditions 10°/ 20°
Max. lowering height 30 m (including 10°/20°trim/list condition)
Operation temperature -20°C till +45°C (other range on request)
Hoisting speed 0~5 m/min
Min. lowering speed According to SOLAS regulation (S = 0.4 + 0.02H)
Pivot bearing type Bronze bearings
Wire sheaves Galvanized
Installation 11 (eleven) deck welding points
Deck reinforcement requirements See general arrangement drawing
Davit system H / W / D See general arrangement drawing
Deck space required See general arrangement drawing

The Viking Norsafe LH type Lifeboat Davit system is especially designed for safe and efficient
launching and retrieval of Viking Norsafe Conventional Lifeboats. The davit system is designed for
long time operation in a tough and corrosive marine/offshore environment. The davit system is
designed to fulfil all requirements as given in latest SOLAS/IMO requirements.
The system will allow:

- Launch of the lifeboat in maximum load condition

- Gravity lowering of the loaded lifeboat independent of external power supply
- Retrieval of the lifeboat with a crew of three persons using electric power
- Retrieval of the lifeboat by manual hand-cranking
- Optional approval for rescue function, according to latest SOLAS regulations

VIKING Project No.: TBA VIKING Doc. No.: TSD-0062

Rev. Date: 29.05.2020 Rev. No: 6

2
The davit comprises of two pivoting arms, hydraulic power unit and an electrically powered winch
operating two wire falls. LH type davit system is optimized for low height and low depth recesses. It is
intended for lifeboats placed onboard ships and similar installations, where compact hydraulically
operated davits offer the best solution.
The davit is designed to achieve optimum performance in terms of safety and reliability, and minimal
maintenance levels. The davit is designed to minimize noise emission and provide straightforward
service access.
To activate the davit, push and hold down the appropriate button or pull the remote control wires to
cause the desired operation. When the button/wire is released, davit operation will cease immediately.
The winch is fitted with a one-way clutch. In the event of power loss during hoisting, the brake will
automatically activate and davit motion will stop.

A centrifugal brake is located on the winch. The brake controls the speed of descent for the lifeboat.
The brake is enclosed, and provides reliable operation in all climate conditions.
Electrical limit switch is used to cut power to the winch, if the boat is hoisted above stowage height.

Electrical limit switches will prevent the boat from being hoisted above its upmost position / stowed
position. Electrical limit switches on the winch provide failsafe operation of the hand crank.

2.2 WINCH AND WIRE

Type NW-120 winch
Drawing reference G-501722
Execution Electrical hoisting / Gravity lowering
Brakes type Centrifugal brakes
Wire rope type Galvanized, rotation resistant (certified item)
Wire rope diameter, MBL and spec. Ø 22 mm, MBL 300 kN, 1960N/mm2
Inner / outer wire end Secured to drum / Wedge socket and safety wire clamp
Wedge socket Included
Master link w/handle Included (certified item)

2.3. ELECTRICAL
Electric power supply 440V/3ph/60Hz (other on request)
Electrical cabinet IP56
Remote control IP56
Limit switch IP56
Power consumption 32.4 kW
Starting method DOL - Direct on line
Duty rating S2-10min
Motor space heating Included, 40W
Electrical cabinet heating Heat loss from 42V transformer
Wiring Included, (only power supply cable required)

VIKING Project No.: TBA VIKING Doc. No.: TSD-0062

Rev. Date: 29.05.2020 Rev. No: 6

3
Cables type Marine type, flame retardant halogen free
Transformer Included, 440/42VAC (other on request)
Emergency stop Yes, mushroom type

2.4. HYDRAULIC
Type Independent integrated hydraulic system
Oil flow 56 l/min @60HZ
Max. working pressure 220 bar
Oil amount 270 l
Motor type 180L-4
Hydraulic cylinders 6x blader type 40 l
System fittings ISO 8434-1 (DIN 2353) bite type metric fittings
Fittings and hose fittings Zinc chromate Cr(VI)-free, secured with Denso tape
Tubes AISI 316L
UV and weather protection Shielded from environmental exposure

2.5. PAINTING SYSTEM

Blasting SA 2.5
Specification ISO 12944-5
System Marine paint system (Jotun paint system)
Coating Two (2) layers (other on Layer 1 Penguard universal, Alu - 220 µm
request) Hardtop XP - 80 µm RAL 9016 (Traffic white)
Total dry film thickness 300 µm

2.6. DOCUMENTATION
Technical specification davit According to contract specification
General arrangement drawing According to contract specification
Electrical wiring diagram According to contract specification
Starter cabinet drawing According to contract specification
Product certificate According to contract specification
Lubrication oil chart Viking Norsafe standard
Spareparts list Viking Norsafe standard
Operation & Maintenance manual Viking Norsafe standard
Installation manual Viking Norsafe standard
Preservation & storage procedure Viking Norsafe standard

3. PACKING
Format Packed for transport in a 40 ft OT container

4. OPTIONS

VIKING Project No.: TBA VIKING Doc. No.: TSD-0062

Rev. Date: 29.05.2020 Rev. No: 6

4
Note: Some options influence davit weight and performance, some option combinations may be
incompatible. Maximum SWL must not be exceeded.
☒ marking means to be supplied by maker, ☐ marking means not supplied by maker.

GENERAL DAVIT
Hoisting fully loaded boat ☐
Winterization / cold climate heating / canvas solutions ☐
Alternative winch (NW-118) ☐
Commissioning performed by Viking Norsafe or Viking Norsafe Service Partners ☐
Additional lowering height
Other options on request ☐

ELECTRIC SYSTEM
Voltage variation ☐
Protection box for remote control ☐
Ex-proof, Zone II 2 G Ex de IIB T3 (other on request) ☐
Additional electric cabinet heater ☐
Alternative cabinet size / material / surface protection ☐

HYDRAULIC SYSTEM
Stainless steel fittings and hose fittings ☐
Protection cover for control valve ☐
Stainless steel HPU tank ☐
Alternative HPU size / material / surface protection ☐
HPU heater ☐

PAINTING SPECIFICATION
Norsok M-501 system （Viking Norsafe Doc. No. TSS-0030） ☐
Other painting system and final color ☐

SPARE PARTS
Spare parts for Startup / Commissioning ☐
Spare parts for Onboard spare ☐
Spare parts for 1 year ☐
Spare parts for 2 years ☐

DOCUMENTATION
Factory acceptance test procedure ☐
Factory acceptance test report ☐
Inspection and test plan ☐
Shipping, handling and lifting procedure ☐
Packing & unpacking procedure ☐

VIKING Project No.: TBA VIKING Doc. No.: TSD-0062

Rev. Date: 29.05.2020 Rev. No: 6

5
 Commissioning procedure ☐
TAG list ☐
Winch drawing ☐
Noise test report ☐
Weight and COG datasheet ☐
Weighing report/certificate ☐
Other drawings/documentation/procedures ☐

5. POSSIBLE BOAT FITTING THIS DAVIT SYSTEM

The VIKING Norsafe boats fit the LH-185 davit types and variants.
JYN-115
(Others on request)

6. YARD SUPPLY / RESPONSIBILITY

Transport Depending on contract
Deck foundations / reinforcement
Assembly, erection and welding
to deck
Wire installation on winch,
routing on davit and termination
Hydraulic piping between HPU
unit, davit and control valves
Hydraulic oil filling
All cables to starter cabinet and
agreed interface
Testing according to regulation
after installation onboard
Preservation and maintenance
after davit arrived yard and
installed

VIKING Project No.: TBA VIKING Doc. No.: TSD-0062

Rev. Date: 29.05.2020 Rev. No: 6