Ac 37
Uploaded by
Tung NguyenAc 37
Uploaded by
Tung NguyenAC–37
AIR CONDITIONING – COMPRESSOR AND MAGNETIC CLUTCH
AC0OF–01
REMOVAL
1. RUN ENGINE AT IDLE SPEED WITH A/C ON FOR
APPROX. 10 MINUTES
2. STOP ENGINE
3. DISCONNECT NEGATIVE (–) TERMINAL CABLE
FROM BATTERY
4. DISCHARGE REFRIGERANT FROM REFRIGERATION
SYSTEM
5. DISCONNECT DISCHARGE AND SUCTION HOSES
Remove the 2 nuts and disconnect the both hoses.
NOTICE:
Cap the open fittings immediately to keep moisture or dirt
out of the system.
6. REMOVE DRIVE BELT
(See page AC–15)
7. REMOVE ENGINE UNDER COVER
8. REMOVE COMPRESSOR
(a) Disconnect the connector.
(b) Remove the bolt and disconnect the earth wire.
(c) Remove the nut, the 3 bolts, compressor No.1 Stay and
the compressor.
N13369
