Cri Motores

An ISO 9001, ISO 14001 & OHSAS 18001 Company
C.R.I. MOTORS
T H E B E G I N N I N G
of C.R.I., way back in 1961, was a resolute attempt to produce a few
irrigation equipments using the limited facilities of an in-house foundry.
Eventually the founder's dream was coming true as the small
production unit he started kept growing rapidly. Now, after more than
five eventful decades, it is an enormous, widely reputed organization,
which produces more than 2300 varieties of perfectly engineered
pumps and motors and sells its products in numerous countries spread
across 6 continents.
C . R . I . I S O N E A M O N G
THE INFRASTRUCTURE
of C.R.I. is pretty comprehensive with state-of-the-art machineries
and high potential in-house R&D recognised by the ministry of
science and technology, Govt. of India - all within its own covered area
of 300,000 square metres. The production environment is accredited
with ISO 9001, ISO 14001 & OHSAS 18001 certifications and the
products are CE, UR/UL, IEC, TSE & ISI certified. The R&D team
always stays in tune with the changing scenario and seldom fails in
coming up with outstanding solutions every time.
N E E D L E S S T O S A Y ,
C.R.I. MOTORS
Vision, Mission and Values
To be the industry leader providing best - in - class fluid management

solutions to individual and institutional customers and societies
in our chosen markets.
We will achieve this through our dedicated efforts to enhance the

welfare of all our stakeholders and by living by our values of
commitment, reliability and innovation.
C O N T E N T S
PageNo.
M O D E L I D E N T I F I C AT I O N C O D E 3
R E S I N F I L L E D E N C A P S U L AT E D S U B M E R S I B L E M O T O R S
4" Motors
D e s c r i p t i o n , Fe a t u r e s a n d A p p l i c a t i o n s 4
Specifications and Materials of Construction 5
E x p l o d e d V i ew 6
Te c h n i c a l D a t a 7
R E S I N F I L L E D E N C A P S U L AT E D S U B M E R S I B L E M O T O R S
D e s c r i p t i o n , Fe a t u r e s a n d A p p l i c a t i o n s 8
4" Motors
6" Motors
W AT E R F I L L E D R E W I N D A B L E S U B M E R S I B L E M O T O R S
D e s c r i p t i o n , Fe a t u r e s & A p p l i c a t i o n s 16
4" Motors
Specification and Materials of Construction 23
6" Motors
Specifications and Materials of construction 25
8" Motors
10" Motors
12" Motors
C a bl e S e l e c t i o n Ta bl e 35
C o nve r s i o n Ta bl e 38
Pumping trust. Worldwide. C.R.I. MOTORS
MODEL IDENTIFICATION CODE
DEEPWELL SUBMERSIBLE MOTOR
X X X S XXX XX X X M (H)(P)
(Applicable for special models)

DEEPWELL SUBMERSIBLE MOTOR P - Motor with PT sensor
W = Water filled H - High temperature motor with
XLPE / PA Winding
R = Resin filled encapsulated
L = Non-toxic fluid filled This digit will be applicable only when
the Motor is supplied with Mechanical Seal
NOMINAL MOTOR DIAMETER VOLTAGE (This digit is applicable

4 = 4", 6 = 6", 8 = 8" except 230V 1Ph)
10 = 10" & 12 = 12" A = 110, D = 220, E = 230, I = 380
TYPE OF MATERIALS OF K = 440, M = 460, P = 575, T=690V
CONSTRUCTION V = 220/380, W = 230/380
X = 110/220, Z = 115/230
Type = A/B/N/S
R = AI Rotor with PG & EPDM cable
This digit is only applicable for K = AI Rotor without PG with PVC cable
(For Copper Rotor Motor, No digit will apply)
1-phase ‘R’ Series motors without
lightning arrestor.
MOTOR POWER (in HP) PHASE / CONNECTION /

05 = 0.5, 10 = 1.0, 15 = 1.5, CONTROL BOX / FREQUENCY
75 = 7.5, 150 = 15, A00 = 100, 2 = 1Ph / PSC type / 2 wire / 60Hz
A25 = 125 3 = 1 Ph / CSCR / 3 wire / 60Hz
4 = 3 Ph / DOL / 3 wire / 60Hz
6 = 3 Ph / STAR-DELTA / 6 wire / 60Hz
In view of continuous developments, the information / descriptions / specifications / illustrations are subject to change without notice.
3
COMMITMENT RELIABILITY INNOVATION
OIL FILLED SUBMERSIBLE MOTORS
Nominal Diameter : 4" "L" Series
Deepstar
Description
These oil filled motors are one among the proven & successful products from the house of C.R.I. These motors are developed
with due diligence complying with all safety standards and giving importance to the customers' need. All the components that
are in contact with water are made of AISI 304 stainless steel and the motor is pre-filled with edible grade oil, which acts as
coolant media as well as lubricant. The freezing point of the oil used is -10°C.
Ball bearings are used to withstand the high axial load and the lower ball bearings are of angular contact type.
High quality carbon/ceramic mechanical seal and oil seal made of Nitrile rubber are used to ensure better sealing system.
Pressure equalizing rubber diaphragm is provided to balance the pressure and volume variations due to thermal expansion
of the oil inside the motor. Motor sealing are made by means of ‘O’ rings. Shaft seals and sand guard prevents ingress of well
water, sand and fiber particles into the motor. Care should be taken to ensure that the motor does not run when it is not
submerged in the water. To prevent the motor from dry running, install water level monitor / dry run prevent. The motor needs a
constant flow of water passed over it’s body to keep it at correct operating temperature. Ideally the motors should be set just
above the final yield point of bore well and when the level is not ascertained, fit a “flow inducer pipe” over the pumpset to
ensure adequate cooling. It is mandatory to use C.R.I. Control boxes for all motors with adequate protection & control
systems. Mounting dimensions of these motors are in accordance with NEMA standard.
Features
 High operating efficiency and lesser power consumption
 Extremely hardwearing ball & angular contact bearings
 Corrosive resistance stainless steel body
 Filled with non-toxic oil
 Can be easily dismantled and repaired
Applications
These prime mover submersible motors are suitable to couple with deepwell submersible pump ends used for
 Residential  Industrial water supply  Ponds

 Irrigation  Sprinkler systems  Mining
 Fountains  Pressure boosting units  CBM (coal bed methane)
 Gardens
4
Deepstar
Specifications
Nominal Dia 4” (100mm)
Maximum Outer Diameter 3.74"
0.5 HP to 3 HP - Single Phase
Power Range
0.5 HP to 10 HP - Three Phase
Speed 3450 rpm
Single Phase - 110 V & 220 V, 60 Hz, A.C Supply
Version
Three Phase - 220 V, 380 V & 460 V, 60 Hz, A.C Supply
Class of Insulation F
Degree of Protection IP 68
CCW - Single Phase
Direction of Rotation
Electrically Reversible - Three Phase
Type of Duty S1 (Continuous)
0.5 HP to 1 HP - 337 lbs
Down Thrust Load 1.5 HP to 4 HP - 562 lbs
5 HP to 10 HP - 1011 lbs
Minimum Cooling Flow Along the Motor 0.5 ft/sec
Maximum Liquid Temperature 91.4°F
Maximum Immersion Depth 150 m
Starts per Hour 30 Times
Shaft Type Splined as per NEMA Standard
Mounting Standard NEMA Standard
Single Phase - Permanent Split Capacitor (PSC)
Method of Starting
Three Phase - Direct On Line (DOL)
Cable Lead out 3 Wire Permanent Type TPE/EPDM Rubber Flat Cable
Type - A
Materials of Construction
Part Name Type - A
Outer Shell SS - 304

Motor Base SS - 304
Shaft Extension SS - 420
'O' Ring High Nitrile Rubber
Mechanical Seal Carbon / Ceramic
Diaphragm High Nitrile Rubber
Cable TPE / EPDM
5
Deepstar
Exploded View
Part No. Part Name
10.00 Motor base

10.02 Diaphragm
10.06 Snap ring
12.00 Lower housing
12.07 Guide bush
13.00 Rotor
14.00 Upper Housing
14.01 Cable Grommet
14.02 Grommet locking plate
14.04 Rubber sand guard
14.05 Sand guard
14.06 Insulation paper
14.07 Upper housing shell
14.09 Grommet washer
16.00 Mechanical seal
24.01 Wound stator
24.02 Lead out cable
24.04 Winding guard
29.06 Outer shell
32.07 Nut
32.09 O-Ring
32.10 O-Ring (Upper housing)
32.11 Drain plug
32.12 Screw
32.13 Sand guard washer
32.15 Stud
32.16 Washer
32.17 Wave washer
32.18 Bearing
33.00 Seal washer
33.01 Adjustment washer
6

Deepstar
110V, SINGLE PHASE ELECTRICAL & DIMENSIONAL DATA
Capacitor MFD Amps Max Down Height H1 Nett Weight
PF Cable Size
Models kW HP S.F. EFF.% Thrust
Cosf (sq.mm)
Starting Running F.L Starting load (lbs) mm Inches kg lbs
L4A-10-3A 0.75 1 1.5 0.98 65 - 60 12.9 46 337 381 15 8 17.6 1.5

L4A-15-3A 1.1 1.5 1.4 0.98 67 - 80 14.9 58 337 399 15.7 9 19.8 1.5
220V, SINGLE PHASE ELECTRICAL & DIMENSIONAL DATA

Capacitor MFD Amps Max Down Height H1 Nett Weight
PF Cable Size
Models kW HP S.F. EFF.% Thrust
Cosf (sq.mm)
Starting Running F.L Starting load (lbs) mm Inches kg lbs
L4A-05-3D 0.37 0.5 1.6 48 80-100 15 5.5 22.5 337 361 14.2 7.3 16.1 1.5
L4A-07-3D 0.55 0.75 1.5 53 80-100 20 6.3 28 337 381 15 8.1 17.9 1.5
L4A-10-3D 0.75 1 1.4 54 80-100 25 7.6 36 337 399 15.7 9.2 20.3 1.5
L4A-15-3D 1.1 1.5 1.3 58 100-120 35 9.4 46 562 429 16.9 10.4 22.9 1.5
L4A-20-3D 1.5 2 1.25 63 120-150 45 12 59 562 480 18.9 12.2 26.9 2
L4A-30-3D 2.2 3 1.15 69 200-250 50 15.6 90 562 521 20.5 14.4 31.8 2.3
220V, THREE PHASE ELECTRICAL & DIMENSIONAL DATA

Current (Amps) Max Down Height H1 Nett Weight Cable
Eff. PF
Model kW HP S.F. Thrust size
(%) Cosf
Starting Load mm kg (Sq.mm)
F. L Inches lbs
L4A-05-4D 0.37 0.5 1.6 2 10 62 0.7 337 409 16.1 7.8 17.2 1.5
L4A-07-4D 0.55 0.75 1.5 3.2 16 65 0.71 337 409 16.1 7.8 17.2 1.5
L4A-10-4D 0.75 1 1.4 4.4 20.0 70 0.72 337 429 16.9 8.8 19.4 1.5
L4A-15-4D 1.1 1.5 1.3 6.5 28.0 71 0.7 562 450 17.7 9.6 21.2 1.5
L4A-20-4D 1.5 2 1.25 7.6 34 72 0.7 562 480 18.9 11.4 25.1 1.5
L4A-30-4D 2.2 3 1.15 10.5 45 75 0.72 562 541 21.3 13.8 30.4 1.5
L4A-40-4D 3 4 1.15 14.2 63 76 0.76 562 602 23.7 18.1 39.9 1.5
L4A-50-4D 3.7 5 1.15 16.2 71 77 0.76 1011 650 25.6 20.1 44.3 2
L4A-55-4D 4 5.5 1.15 18 82 78 0.76 1011 650 25.6 20.1 44.3 2
L4A-75-4D 5.5 7.5 1.15 23.5 104 78 0.78 1011 762 30 26.2 57.8 2.3
L4A-100-4D 7.5 10 1.15 31.5 140 80 0.86 1011 879 34.6 32.6 71.8 2.3
Current (Amps) Max Down Height H1 Nett Weight Cable
Eff. PF
(%) Cosf
F. L Inches lbs
Dia. Max. L4A-05-4I 0.37 0.5 1.6 1.3 6.5 62 0.7 337 409 16.1 7.8 17.2 1.5
H1 L4A-07-4I 0.55 0.75 1.5 2 11 65 0.71 337 409 16.1 7.8 17.2 1.5
L4A-10-4I 0.75 1 1.4 2.6 14 70 0.72 337 429 16.9 8.8 19.4 1.5
L4A-15-4I 1.1 1.5 1.3 3.6 20 71 0.7 562 450 17.7 9.6 21.2 1.5
L4A-20-4I 1.5 2 1.25 4.9 25 72 0.7 562 480 18.9 11.4 25.1 1.5
L4A-30-4I 2.2 3 1.15 6 30 75 0.72 562 541 21.3 13.8 30.4 1.5
L4A-40-4I 3 4 1.15 8.2 37 76 0.76 562 602 23.7 18.1 39.9 2
L4A-50-4I 3.7 5 1.15 9.3 42 77 0.76 1011 650 25.6 20.1 44.3 2
L4A-55-4I 4 5.5 1.15 10.4 47 78 0.76 1011 650 25.6 20.1 44.3 2
L4A-75-4I 5.5 7.5 1.15 13.7 65 78 0.78 1011 762 30 26.2 57.8 2.3
L4A-100-4I 7.5 10 1.15 18.2 102 80 0.86 1011 879 34.6 32.6 71.8 2.3
Splined shaft 14 Teeth - module Current (Amps) Max Down Height H1 Nett Weight Cable
1.5875 Pressure angle 30O
Eff. PF
A.N.S.I.B - 92 - 1 - 1970 (%) Cosf
Coupling Class 5 F. L Inches lbs
L4A-05-4M 0.37 0.5 1.6 1.1 5.5 62 0.76 337 409 16.1 7.8 17.2 1.5
L4A-07-4M 0.55 0.75 1.5 1.6 8 66 0.75 337 409 16.1 7.8 17.2 1.5
L4A-10-4M 0.75 1 1.4 2 10 70 0.75 337 429 16.9 8.8 19.4 1.5
L4A-15-4M 1.1 1.5 1.3 2.8 14 72 0.74 562 450 17.7 9.6 21.2 1.5
L4A-20-4M 1.5 2 1.25 3.8 19 74 0.73 562 480 18.9 11.4 25.1 2
L4A-30-4M 2.2 3 1.15 5.5 26 74 0.74 562 541 21.3 13.8 30.4 2.3
L4A-40-4M 3 4 1.15 6.9 34 76 0.74 562 602 23.7 18.1 39.9 2.3
L4A-50-4M 3.7 5 1.15 8.7 43 75 0.77 1011 650 25.6 20.1 44.3 2.3
L4A-55-4M 4 5.5 1.15 10 50 76 0.78 1011 650 25.6 20.1 44.3 2.3
L4A-75-4M 5.5 7.5 1.15 12.8 65 78 0.78 1011 762 30 26.2 57.8 2.3
7
RESIN FILLED ENCAPSULATED SUBMERSIBLE MOTORS
Nominal Diameter : 4" & 6" "R" Series
Description
These motors are hermetically sealed, encapsulated and water lubricated type with removable cable lead out. The stator
windings are of enameled copper wire and the wound stator is mounted in a stainless steel shell and is completely protected by
a stainless steel cylinder and stator room is pre-filled with resin. The resin filled in the space between the stator & the stainless
steel cylinder dissipates heat quickly resulting in longer motor life. Except stator, other portions of the motor is pre-filled with
deionised water containing propylene glycol (anti-freeze agent) which serves as coolant & lubricant for rotor, bushes and thrust
bearing. Dynamically balanced rotors of these motors maintain uniform clearance thereby giving better efficiency and increase
the life cycle of the water lubricated bush bearings. Specially designed high performance thrust bearings are used that can
withstand high axial thrust loads and upthrust loads with minimum wear and tear.
The unique design of thrust bearings creates a wedge of water between the shoe and the disc and thereby providing better
water lubrication and increases the life cycle of the thrust bearings. Pressure equalizing rubber diaphragm is provided to guard
the pressure and volume variations due to thermal expansion of the water inside the motor. Motor sealing are made by means
of ‘O’ rings. Shaft seals and sand guard prevents ingress of well water, sand and fiber particles into the motor. Care should be
taken to ensure that the motor does not run when it is not submerged in the water. To prevent the motor dry running, install
water level monitor / dry run preventor. The motor needs a constant flow of water past it’s body to keep it at correct operating
temperature. Ideally, the motor should be set just below the level at which water enters the bore well. When this level is not
ascertained, fit a “flow inducer sleeve” over the pumpset to ensure adequate cooling. It is mandatory to install C.R.I. Control
box for all single phase 3 wire motors. All 3 Ph motors require an adequate motor protection control panel. Mounting
dimensions of motors are in accordance with NEMA standards.
Features
 Corrosive resistant stainless steel body.
 Specially designed thrust bearing to withstand high axial thrust loads.
 Low watt loss silicon steel laminations for better starting torque.
 Higher power factor resulting in lesser power consumption.
 Better heat dissipation for prolonged life cycle.
 All single phase two wire motors are supplied with in-built permanent split capacitor.
 Optional : All single phase models are also available with lightening arrester.
Applications
These prime mover submersible motors are suitable to couple with deepwell submersible pumpends used for :
 Residential  Irrigation  Pressure boosting units

 Fountains  Gardens  Sprinkler System
 Industrial water supply  Mining  Oil & Gas  De-watering
8
Nominal Diameter : 4" "R" Series
Specifications
0.5 HP to 1.5 HP - Single Phase 2 Wire
Power Range 0.5 HP to 5 HP - Three Phase 3 Wire
0.5 HP to 10 HP - Three Phase 3 Wire
Speed 3450 rpm
Single Phase - 110 V, 220 V, 60 Hz, A.C Supply
Version
Three Phase - 220 V, 380 V & 460 V, 60 Hz, A.C Supply
Class of Insulation B
CCW - Single Phase
0.5 HP to 0.75 HP - 300 lbs
Down Thrust Load 1 HP to 2 HP - 650 lbs
3 HP to 10 HP - 1500 lbs
Single Phase-3 Wire - Capacitor Start Capacitor Run (CSCR)
Method of Starting Single Phase-2 Wire - Permanent Split Capacitor (PSC)
Three Phase - Direct On Line (DOL) 3 Wire 2 Wire
Cable Lead out 2 & 3 Wire Removable Type TPE Flat Cable
Part Name Type - A
Housings Shell SS - 304

Stator Shell SS - 304
Thrust Pad Carbon Graphite
Thrust Bearing SS - 420
'O' Ring Nitrile Rubber (NBR)
Diaphragm Nitrile Rubber (NBR)
Motor Base SS - 304
Cable TPE
9

(0.5 to 3HP)
(*2 wire & 3 wire)
Exploded view
13.03
14.04
32.14
32.07
32.13
24.02
32.15
14.07
13.00
14.05
32.05
32.08
11.04
32.11
32.09 11.06
32.24
11.00
Part No. Part Name
14.00
12.03
10.00 Motor base
10.02 Diaphragm
32.09 10.04 Diaphragm guide plate
32.19 11.00 Thrust Base
11.04 Thrust Pad
11.09 11.06 Thrust segment
12.03 11.09 Rocker screw
12.00 12.00 Lower housing
12.03 Bush
14.01
13.00 Rotor
13.03 Upthrust washer
14.00 Upper housing
32.19
14.01 Cable grommet clamp
10.04 14.05 Sand guard
21.01 Wound stator
24.01 10.02
32.05 Pad key
32.07 Nut
10.00 32.08 Oil seal
32.09 O - Ring
32.16 32.11 Drain Plug
32.12 32.12 Screw
32.19 32.14 Spring washer
32.15 Stud
32.16 Washer
32.19 Gasket
32.24 Vent plug
* 2 wire motor’s stator is in-built with permanent split capacitor
10

(4HP and above)
Exploded view
14.04
32.14 11.04
32.07 32.13
24.02
32.15
32.19
11.06
14.07 11.00
14.05
13.03
32.08 32.09
32.11
32.09 11.01
32.24
Part No. Part Name
32.09
14.00 32.12
10.00 Motor base
13.00 11.09 10.02 Diaphragm
10.04 Diaphragm guide plate
32.05 11.00 Thrust Base
32.19
32.19 11.01 Thrust base housing
11.04 Thrust Pad
11.06 Thrust segment
12.03 10.04
11.09 Rocker screw
14.01 10.02 12.03 Bush
13.00 Rotor
13.03 Upthrust washer
14.00 Upper housing
10.00
32.09 14.01 Cable grommet clamp
32.16
32.12 24.01 Wound stator
24.01 32.05 Pad key
12.00 32.07 Nut
32.08 OIl seal
32.09 O - ring
32.11 Drain plug
32.12 Screw
32.14 Spring washer
32.15 Stud
32.16 Washer
32.19 Gasket
32.24 Vent plug
11
110 V & 220V, SINGLE PHASE, 2 WIRE MOTORS TECHNICAL & ELECTRICAL DATA
Rated (F.L.) Maximum (S.F.) Eff. % P.F. % Locked Max. Down
Capacitor
Models Voltage HP S.F. Rotor Thrust Load
Amps Watts Amps Watts S.F. F.L. S.F. F.L. Value µf
Amps (lbs)
R4AS-05-2A 110V 0.5 1.6 7.1 753 9.2 980 60 50 97 97 32 300 50
R4AS-07-2A 110V 0.75 1.5 10 1100 12.7 1395 61 52 99 99 43 300 60
R4AS-10-2A 110V 1 1.4 12.1 1313 15 1640 64 57 98 99 55 650 80
R4AS-05-2D 220V 0.5 1.6 3.4 730 4.3 960 62 51 97 92 18 300 25
R4AS-07-2D 220V 0.75 1.5 4.7 998 5.8 1300 61 56 95 92 25 300 30
R4AS-10-2D 220V 1 1.4 6.2 1306 7.5 1650 63 57 95 91 33 650 35
R4AS-15-2D 220V 1.5 1.3 9 1931 10.5 2300 65 62 97 95 45 650 45
110 V & 220V, SINGLE PHASE, 3 WIRE MOTORS TECHNICAL & ELECTRICAL DATA
Rated (F.L.) Maximum (S.F.) Eff. % P.F. % Locked Max. Down Capacitor Value µf
Models Voltage HP S.F. Rotor Thrust Load
Amps Watts Amps Watts S.F. F.L. S.F. F.L. Amps (lbs) Start Run
R4AS-05-3A 110V 0.5 1.6 8.5 760 11.5 1120 54 50 88 82 36 300 125 20
R4AS-07-3A 110V 0.75 1.5 10.3 1027 14.5 1450 57 55 91 90 46 300 125 30
R4AS-10-3A 110V 1 1.4 12 1186 16 1620 64 63 93 90 58 650 150 40
R4AS-05-3D 220V 0.5 1.6 4.2 796 5.5 1120 54 50 76 62 23 300 60 10
R4AS-07-3D 220V 0.75 1.5 5.3 1141 6.9 1550 61 56 75 64 32 300 60 15
R4AS-10-3D 220V 1 1.4 6.4 1412 8.3 1825 63 57 73 62 39 650 100 20
R4AS-15-3D 220V 1.5 1.3 8.8 1994 11.5 2390 65 62 86 82 46 650 100 20
R4AS-20-3D 220V 2 1.15 10.7 2236 12.3 2453 70 66 93 92 54 650 125 30
R4AS-30-3D 220V 3 1.15 15.5 3530 18.5 4035 69 69 97 97 85 1500 150 45
R4AS-50-3D 220V 5 1.15 25.5 5770 31 6634 69 69 98 98 120 1500 250 80
220V, THREE PHASE, 3 WIRE MOTORS TECHNICAL & ELECTRICAL DATA

Models HP S.F. Rotor Thrust Load
Amps Watts Amps Watts S.F. F.L. S.F. F.L. Amps (lbs)
R4A-05-4D 0.5 1.6 2.5 590 3 870 68 63 76 62 15.5 300
R4A-07-4D 0.75 1.5 3.2 825 3.9 1170 70 68 78 66 20 300
R4A-10-4D 1 1.4 4 1100 4.8 1460 71 71 80 70 26.9 650
R4A-15-4D 1.5 1.3 5 1490 6 1910 74 74 83 76 34 650
R4A-20-4D 2 1.25 6.8 2180 8.2 2720 73 73 86 80 45 650
R4A-30-4D 3 1.15 9.5 3010 11 3450 74 74 81 78 62 1500
R4A-50-4D 5 1.15 16 5100 18 5830 73 73 84 81 105 1500
R4A-55-4D 5.5 1.15 18.2 5650 20.6 6540 73 73 80 78 115 1500
R4A-75-4D 7.5 1.15 23 7400 26.8 8460 75 75 83 81 165 1500
R4A-100-4D 10 1.15 31 10000 35 11450 75 74 88 86 230 1500
12

R4A-05-4I 0.5 1.6 1.5 590 2.2 870 68 63 76 62 9.7 300
R4A-07-4I 0.75 1.5 2 825 2.6 1170 70 68 78 66 12 300
R4A-10-4I 1 1.4 2.4 1100 2.9 1460 71 71 80 70 16.5 650
R4A-15-4I 1.5 1.3 3 1490 3.7 1910 74 74 83 76 20 650
R4A-20-4I 2 1.25 4.1 2180 5 2720 73 73 86 80 28.5 650
R4A-30-4I 3 1.15 5.9 3010 6.8 3450 74 74 81 78 38 1500
R4A-50-4I 5 1.15 9.8 5100 11 5830 73 73 84 81 65 1500
R4A-55-4I 5.5 1.15 11 5650 12.2 6450 73 73 80 78 70 1500
R4A-75-4I 7.5 1.15 14 7400 16 8460 75 75 83 81 98 1500
R4A-100-4I 10 1.15 19.5 10000 21.2 11500 75 74 88 86 140 1500

R4A-05-4M 0.5 1.6 1.3 590 1.6 870 68 63 76 62 7.5 300
R4A-07-4M 0.75 1.5 1.7 825 2 1170 70 68 78 66 11 300
R4A-10-4M 1 1.4 2 1100 2.5 1460 71 71 80 70 13.5 650
R4A-15-4M 1.5 1.3 2.5 1490 3.2 1910 74 74 83 76 16.8 650
R4A-20-4M 2 1.25 3.4 2180 4.2 2720 73 73 86 80 23.5 650
R4A-30-4M 3 1.15 4.9 3010 5.6 3450 74 74 81 78 32 1500
R4A-50-4M 5 1.15 8 5100 9 5830 73 73 84 81 55 1500
R4A-55-4M 5.5 1.15 9.3 5650 10.2 6540 73 73 80 78 60 1500
R4A-75-4M 7.5 1.15 11.5 7400 13.5 8460 75 75 83 81 80 1500
R4A-100-4M 10 1.15 16 10000 17.4 11500 75 74 88 86 115 1500
SINGLE PHASE 2 & 3 WIRE MOTORS DIMENSIONS & WEIGHT DATA

Models Height H1 Nett Weight (Approx.)
Leadout Cable
HP Size (Sq.mm) 2 wire 3 wire 2 wire 3 wire
2 wire 3 wire mm Inch mm Inch kg lbs kg lbs
R4AS-05-2 R4AS-05-3 0.5 2 292 11.5 241 9.5 44 19.8 39 17.8
R4AS-07-2 R4AS-07-3 0.75 2 320 12.6 270 10.6 50 22.7 44 19.8
R4AS-10-2 R4AS-10-3 1 2 348 13.7 297 11.7 55 24.9 50 22.9
R4AS-15-2 R4AS-15-3 1.5 2 396 15.6 345 13.6 68 30.9 64 29.1
NA R4AS-20-3 2 2 - - 383 15.1 - - 71 32.2
NA R4AS-30-3 3 2 - - 531 20.9 - - 112 50.7
Dia. Max.
NA R4AS-50-3 5 2 - - 686 27 - - 145 66.1
H1
THREE PHASE 3 WIRE MOTORS DIMENSIONS & WEIGHT DATA
Leadout Cable Height H1 Nett Weight (Approx.)
Models HP Size (Sq.mm) mm Inch kg lbs
R4A-05-4 0.5 2 241 9.5 39 17.8
R4A-07-4 0.75 2 270 10.6 44 19.8
R4A-10-4 1 2 297 11.7 50 22.9
R4A-15-4 1.5 2 297 11.7 50 22.9
R4A-20-4 2 2 345 13.6 64 29.1
R4A-30-4 3 2 455 17.9 88 40.1
R4A-50-4 5 2 530 20.9 112 50.7
Splined shaft 14 Teeth - module R4A-55-4 5.5 2 556 21.9 116 52.9
1.5875 Pressure angle 30O
A.N.S.I.B - 92 - 1 - 1970
R4A-75-4 7.5 2 686 27 145 66.1
Coupling Class 5 R4A-100-4 10 2 757 29.8 165 75
13
Specifications
Power Range 5 HP to 60 HP - Three Phase
Speed 3450 rpm
Version Three Phase - 230 V, 380 V & 460 V, 60 Hz, A.C Supply
Class of Insulation F
Direction of Rotation Electrically Reversible
5 HP to 30 HP - 3485 lbs
Down Thrust Load
40 HP to 60 HP - 6182 lbs
Maximum Liquid Temperature 5 HP to 40 HP - 86°F, 50 HP & 60 HP - 122°F
Method of Starting
Three Phase - Star Delta (SD)
Cable Lead out 3 Wire Removable Type TPE Flat Cable
Part Name Type - A
Housings Shell SS - 304

Stator Shell SS - 304
Thrust Pad Carbon Graphite
Thrust Bearing SS - 420
'O' Ring Nitrile Rubber (NBR)
Diaphragm Nitrile Rubber (NBR)
Motor Base SS - 304
Cable TPE
14
230V, THREE PHASE TECHNICAL & ELECTRICAL DATA

R6A-55-4E 5 1.15 15 4700 17.6 5400 79 79 79 79 86 3485
R6A-75-4E 7.5 1.15 21.8 7000 24.6 8000 80 80 80 80 130 3485
R6A-100-4E 10 1.15 28.4 9400 32.2 10800 79 79 79 79 172 3485
R6A-150-4E 15 1.15 41.6 13700 47.4 15800 81 81 81 81 266 3485
R6A-200-4E 20 1.15 53.8 18100 60.6 20900 82 82 82 82 362 3485
R6A-225-4E 25 1.15 67 22500 75 25700 83 83 83 83 480 3485
R6A-300-4E 30 1.15 79 26900 90.4 31100 83 83 83 83 568 3485

R6A-55-4I 5 1.15 9.1 4700 10.7 5400 79 79 79 79 52 3485
R6A-75-4I 7.5 1.15 13.4 7000 15 8000 80 80 80 80 79 3485
R6A-100-4I 10 1.15 17.6 9400 19.6 10800 79 79 79 79 104 3485
R6A-150-4I 15 1.15 25.8 13700 28.9 15800 81 81 81 81 161 3485
R6A-200-4I 20 1.15 33 18100 37.3 20900 82 82 82 82 219 3485
R6A-225-4I 25 1.15 41 22500 46 25700 83 83 83 83 291 3485
R6A-300-4I 30 1.15 48.8 26900 55.4 31100 83 83 83 83 317 3485
R6A-400-4I 40 1.15 66.5 35600 74.6 42400 83 83 83 83 481 6182
R6A-500-4I 50 1.15 83.5 45100 95 52200 83 83 83 83 501 6182
R6A-600-4I 60 1.15 98.7 53500 111 61700 84 84 84 84 627 6182

R6A-55-4M 5 1.15 7.5 4700 8.8 5400 79 79 79 79 43 3485
R6A-75-4M 7.5 1.15 10.9 7000 12.3 8000 80 80 80 80 65 3485
R6A-100-4M 10 1.15 14.2 9400 16.1 10800 79 79 79 79 86 3485
R6A-150-4M 15 1.15 20.8 13700 23.7 15800 81 81 81 81 133 3485
R6A-200-4M 20 1.15 26.9 18100 30.3 20900 82 82 82 82 181 3485
R6A-225-4M 25 1.15 33.5 22500 37.5 25700 83 83 83 83 240 3485
R6A-300-4M 30 1.15 39.5 26900 45.2 31100 83 83 83 83 284 3485
R6A-400-4M 40 1.15 54.9 35600 61.6 42400 83 83 83 83 397 6182
Dia. Max.
R6A-500-4M 50 1.15 67.7 45100 77 52200 83 83 83 83 414 6182
H1
R6A-600-4M 60 1.15 80.5 53500 91 61700 84 84 84 84 518 6182
THREE PHASE, 3 WIRE MOTORS DIMENSIONS & WEIGHT DATA

Height H1 Nett Weight (Approx.)
Models HP
mm Inches kg lbs
R6A-50-4M 5 645 25.4 25.5 56
R6A-75-4M 7.5 579 22.8 22.7 50
R6A-100-4M 10 610 24 24 53
R6A-150-4M 15 676 26.6 26.4 58
R6A-200-4M 20 739 29.1 29 64
R6A-250-4M 25 805 31.7 31.8 70
R6A-300-4M 30 869 34.2 34 75
R6A-400-4M 40 998 39.3 39.5 87
R6A-500-4M 50 1336 52.6 52.7 116
R6A-600-4M 60 1638 64.5 64.5 142
15
WATER FILLED REWINDABLE SUBMERSIBLE MOTORS
Nominal Diameter : 4", 6", 8", 10" & 12" "W" Series
Wellrounder
Description
These motors are eco-friendly, wet type, water filled and rewindable. The stator windings are of water proof synthetic film
insulated copper winding wires. It features water lubricated thrust and journal bearings. Motor is pre-filled with clear, cold,
pure, fresh, filtered propylene glycon (anti-freez agent) mixed water. Before commissioning, ensure the pre-filled level of
water inside the motor. If any loss of volume is noticed, refill with clear, cold, pure, fresh, filtered water, through water filling
plugs / valves provided in the upper housing. Where the use of anti-freeze agent mixed water is not be allowed for special
applications, these motors can also be filled with clear, cold, pure, fresh, filtered water and operated. Dynamically balanced
rotors maintains uniform clearance thereby giving better efficiency and increase the life cycle of the water lubricated bush
bearings. Specially designed high performance thrust bearings are used to withstand high axial thrust loads and up thrust
loads with minimum wear and tear.
The unique design of thrust bearings create a wedge of water between the shoe and the disc, and thereby providing better
water lubrication and increases the life cycle of the thrust bearings. Pressure equalizing rubber diaphragm is provided to
balance the pressure and volume variations of the water inside the motor. Motor sealing are made by means of ‘O’ rings.
Shaft seals and sand guard prevents ingress of well water, sand and fiber particles into the motor. Care should betaken to
ensure that the motor does not run when it is not submerged in the water, To prevent the motor from dry running, install water
level monitor/dry run preventor. The motor needs a constant flow of water passed over it’s body to keep it at correct operating
temperature. Ideally the motors should be set just above the final yield point of bore well and when the level is not
ascertained, fit a “flow inducer pipe” over the pumpset to ensure adequate cooling. It is mandatory to use C.R.I. Control
boxes for all motors with adequate protection & control systems. Mounting dimensions of these motors are in accordance
with NEMA standard.
Features
 Water cooled Re-windable motor

 Can be easily dismantled and repaired
 High operating efficiency
 Extremely hardwearing and water lubricated bearings
 Specially designed thrust bearing to withstand high axial loads.
 AISI 630 (17.4 PH) motor shaft extension for longer life.
Applications
These prime mover submersible motors are suitable to couple with deepwell
submersible pumpends used for
Residential  Pressure boosting units  Oil & Gas
Irrigation  Gardens  De-watering
Fountains  Sprinkler systems  CBM (Coal bed methane)
Industrial water supply  Mining  Mining
16

Nominal Diameter : 4" "W" Series
(Upto 2HP)
Wellrounder
Exploded view
32.07 29.04
14.17 10.06
14.16
14.04
14.01
14.07
32.15
32.11
32.00 Part No. Part Name

32.12 13.00
14.02 32.16 10.00 Motor Base
32.08 10.02 Diaphragm
14.01
32.05 10.03 Diaphragm Plate
10.06 Snap Ring
11.00 Thrust Base
11.04 Thrust Pad
14.00 11.09 Rocker Screw
12.00 Lower Housing
11.04
12.03 Bush
32.09 13.00 Rotor
12.03 13.03 Up Thrust Washer
11.00 14.00 Upper Housing
32.09 14.01 Cable Grommet
14.02 Grommet Clamp
11.09
10.06 14.04 Rubber Sand Guard
14.07 Upper Housing Shell
32.16 14.16 Motor Cap
29.04
14.17 Motor Clamp
13.03 32.09 24.01 Wound Stator
24.02 Lead Out Cable
24.02 29.04 Flange
12.03
32.00 Bolt
32.05 Key
32.07 Nut
12.00 32.08 Oil Seal
32.09 O Ring
32.11 Drain Plug
10.03
32.12 Screw
10.02 32.15 Stud
32.16 Washer
32.09
10.00
24.01 32.00
17

(3HP & Above)
Wellrounder
Exploded view
32.07 24.02
24.04
14.17
14.16
14.04
14.01
14.07
32.12
14.02 24.01
14.01
32.00
32.11

24.04
32.08 10.00 Motor Base
10.02 Diaphragm
11.00 Thrust Base
12.08 11.03 Thrust Base Plate
14.00
11.04 Thrust Pad
11.06 Thrust Segment
32.09 11.07 Rocker Screw Cap
12.03
11.08 Rocker Screw Nut
32.09 12.03 11.09 Rocker Screw
12.00 Lower Housing
12.03 Bush
12.08 Lower Pipe
14.06 13.00 Rotor
13.04 Counter Thrust Pad
12.00
14.00 Upper Housing
14.01 Cable Grommet
14.02 Grommet Clamp
13.04 14.04 Rubber Sand Guard
14.06 Upper Pipe
32.00 14.07 Upper Housing Shell
14.16 Motor Cap
11.04
14.17 Motor Clamp
32.01 24.01 Wound Stator
11.06
24.02 Lead Out Cable
11.00
24.04 Winding Guard
11.03
32.00 Bolt
11.09 32.01 Circlip
13.00 32.05 Key
11.08
32.07 Nut
11.07 32.08 Oil Seal
10.02 32.09 O Ring
32.11 Drain Plug
32.12 Screw
10.00
32.15 Stud
32.16 Washer
32.16
32.05
32.00
18 In view of continuous developments, the information / descriptions / specifications / illustrations are subject to change without notice.
Wellrounder
Exploded view
12.03
13.03
12.00
14.04
32.23

10.02 Diaphragm
13.04
11.04 10.03 Diaphragm Bottom Plate
32.15 10.05 Doom Nut
32.01 10.06 Snap Ring
11.00 Thrust Base
14.07 13.00
32.19 11.01 Thrust Base Housing
11.04 Thrust pad
11.06 Thrust Segment
32.09 11.07 Rocker cap
11.06
32.16 32.05 11.08 Rocker Lock Nut
11.00 11.09 Rocker Screw
32.11 13.06 12.00 Lower Housing
32.09 12.03 Bush-Carbon
10.06 11.01 13.00 Rotor
32.01 32.00 13.03 Up Thrust Washer
29.05 13.04 Counter Thrust Pad
13.06 Pad Supporting Ring
32.08 11.09
14.01 Cable Grommet
11.08 14.02 Cable Grommet Lock Plate
14.04 Sand Guard Rubber
32.00 24.02 11.07
14.07 Upper Housing Shell
14.16 Inlet / Outlet Valve
24.01 Wound Stator
14.02 10.02 24.02 Cable
24.04 Winding Guard
14.01 29.05 Retaining Ring
10.03 32.00 Bolt
14.16
32.01 Circlip
32.09 32.05 Key
10.00 32.07 Nut
32.08 Oil Seal
32.09 O-Ring
14.00
32.09 32.11 Plug
32.15 Stud
32.16 Washer
24.01 32.19 Gasket
32.16
12.03 29.05 32.23 Tie Rod
32.09
10.06 10.05
19
Wellrounder
Exploded view
32.19
32.07
12.03
12.00
32.15
12.05
32.19
32.12
11.04
14.04
32.01
16.04 11.06

32.19 10.02 Diaphragm
10.03 Diaphragm Bottom Plate
10.05 Doom nut
11.00 Thrust Base
32.00
32.16 11.04 Thrust Pad
10.00
32.11 11.06 Thrust Segment
32.05
11.07 Rocker Cap
11.08 Rocker Lock nut
32.16
24.01 32.09 11.09 Rocker Screw
12.00 Lower Housing
24.02 12.03 Bush-Carbon
10.05
12.05 Counter Thrust Ring
16.00 13.00 Rotor
14.00 Upper Housing
11.09 14.01 Cable Grommet
14.02 Cable Grommet Lock Plate
16.02
14.04 Sand Guard-Rubber
11.08 14.16 Inlet / Outlet Valve
14.02 16.00 Mechanical Seal
16.02 Mechanical Seal Rest Washer
16.04 Mechanical Seal Guide Plate
14.01 11.07
24.01 Wound Stator
24.02 Cable
32.00 Bolt
14.16 32.01 Circlip
32.09 10.02 32.05 Key
32.11
32.07 Nut
14.00 32.09 O-ring
32.23
10.03 32.11 Plug
12.03
32.12 Screw
32.19 32.15 Stud
32.16 Washer
32.12 32.19 Gasket
32.23 Tie Rod
20
Wellrounder
Exploded view
14.04 13.12
16.02
32.07
16.00
32.16
13.12 32.15
16.02
35.00
35.01 32.11
14.02 32.09
14.11
14.10 35.02
14.11
14.12 35.01
32.19 14.00
12.03
Part No. Part Name
10.00 Motor Base

10.02 Diaphragm
11.03 Thrust Bearing Bottom
13.06 11.04 Thrust Pad
11.05 Ball
11.09 Rocker Screw
12.00 Lower Housing
13.00 24.01
12.03 Bush
13.00 Rotor
13.07 13.03 Upthrust Washer
13.06 Rotor Sleeve
32.05 13.07 Rotor Sleeve
12.03 14.02 Grommat Locking Plate
14.04 Rubber Sand Guard
32.19 14.10 Cable clamping Plate
14.11 Cable clamping Plastic
14.12 Cable Clamping Washer
16.00 Mechanical Seal
16.02 Mechanical Seal Clamp Plate
12.00 24.01 Wound Stator
32.01 Circlip
32.05 Pad Key
13.03
32.07 Nut
34.00 32.09 "O" Ring
32.19
32.10 Segment Guide Pin
11.04 34.01 32.11 Drain Plug
32.09 32.12 Screw
11.06 11.09 32.15 Stud
32.19 32.16 Washer
32.10 32.19 Gasket
11.10 32.23 32.23 Tie Rod
34.00 Thrust Pad Holder
11.05 10.02 34.01 Adjustment Cover
10.00 35.00 PT Sensor Cap
11.03
35.01 PT Sensor Dummy
35.02 ' O " Ring
32.16
32.07
21
Wellrounder
Exploded view
32.12
16.02
32.09
32.11
15.00 32.09
32.15 32.11 11.06
32.14 32.09
32.16 11.05
16.00 32.09
32.10
32.16
32.01
33.02 11.10
14.00
32.05 32.16 32.07
32.12
11.03
32.15
32.07 10.00 Motor base
10.02 Diaphragm
11.01 Thrust base housing
11.11 11.03 Thrust bearing bottom
11.04 Thrust Pad
13.00 11.05 Ball
32.09 11.06 Thrust segment
11.08 Rocker screw nut
24.01
32.15 11.09 Rocker screw
11.10 Ball guide ring
11.09 11.11 Thrust bearing base plate
12.03 Bush
32.05 11.01 13.00 Rotor
13.03 Upthrust Washer
32.12 14.00 Upper housing
13.03 15.00 Seal housing
16.00 Mechanical seal
12.03 32.16 16.02 Mechanical seal clamp plate
11.04
24.01 Wound stator
32.01 10.02 32.01 Circlip
32.05 Key
32.09 32.07 Nut
32.09
32.09 O - Ring
32.10 Segment guide pin
32.11 Drain plug
12.00 10.00
32.12 Screw
32.15 Stud
33.02 32.09 32.16 Washer
32.23 Tie rod
32.15 33.02 Bolt
22
Wellrounder
Specifications
Power Range 0.5 HP to 10 HP - Three Phase
Speed 3450 rpm
Class of Insulation Y
Direction of Rotation Electrically Reversible
0.5 HP to 2 HP - 800 lbs
Down Thrust Load
3 HP to 10 HP - 1500 lbs
Method of Starting Three Phase - Direct On Line (DOL)
Permanently Connected and Sealed 3/4 Core
Cable Lead out
TPE/EPDM Rubber Flat Cable Type - A/N
Part Name Type - A Type - N
Shaft Seal Nitrile Rubber (NBR) Nitrile Rubber (NBR)

Housing Shell SS - 304 SS - 316
Stator Shell SS - 304 / 441 SS - 316
Thrust Pad Carbon Graphite Carbon Graphite
Thrust Bearing SS - 420 SS - 420
Diaphragm High Nitrile Rubber High Nitrile Rubber
Motor Base SS - 304 SS - 316
Bush Carbon Carbon
220, 380 & 460V, THREE PHASE DIMENSIONS & WEIGHT DATA
Lead Out Cable (Sq.mm) Height H1 Nett Weight Approx.
Motor Model HP
220 V 380 V 460 V mm Inches kg lbs
W4A-05-4 0.5 1.5 1.5 - 432 17.0 14.2 31.4
W4A-07-4 0.75 1.5 1.5 - 472 18.6 16.3 35.9
W4A-10-4 1 1.5 1.5 - 502 19.8 17.8 39.2
W4A-15-4 1.5 2.5 1.5 - 560 22.0 20.8 45.8
W4A-20-4 2 2.5 1.5 - 715 28.1 27 59.2
W4A-30-4 3 2.5 1.5 1.5 725 28.5 32 70.4
W4A-40-4 4 2.5 1.5 1.5 890 35.0 36 79.0
W4A-50-4 5 4.0 2.5 2.5 965 37.9 39.7 87.4
W4A-60-4 6 4.0 2.5 2.5 1143 45.0 43.2 95.2
W4A-75-4 7.5 4.0 2.5 2.5 1320 52.0 46.8 103.0
W4A-100-4 10 4.0 2.5 2.5 1422 56.0 47.7 105.0
The last digit of the model number denotes voltage (D = 220V, E = 230V, I = 380V, M = 460V).
23
Wellrounder
45° STUD (M8 x 1.25), 4 Nos.,
EQUISPACED ON PCD 76.2
(12.7mm) Min.
RATED MAX. S.F. Efficiency % Power Factor% Locked Thrust
Ø1.37” (35mm)
MODEL HP SF Rotor Capacity Ø1.22” (31mm)
Amps W Amps W S.F F.L. 3/4 S.F F.L 3/4 Amps (lbs) Ø0.61” (15.55mm)
0.5”
0.5 664
(38mm)
W4A-05-4D 1.6 2.3 3.1 928 59 56 51 80 75 70 15 800
1.49”
W4A-07-4D 0.75 1.5 3.6 928 4.3 1264 65 63 57 79 75 64 21 800
W4A-10-4D 1 1.4 4 1136 5.5 1600 68 66 60 80 75 68 25 800
W4A-15-4D 1.5 1.3 5.5 1648 7.3 2032 70 69 65 80 77 71 34 800
Ø3.81”
2 2280 (97mm)
W4A-20-4D 1.25 8 9.6 2600 71 69 66 78 75 71 44 800
W4A-30-4D 3 1.15 10.4 3120 12 3720 72 72 68 80 78 74 58 1500
W4A-40-4D 4 1.15 15 4160 16.8 4720 71 73 70 78 73 70 75 1500
H1 (HEIGHT)
W4A-50-4D 5 1.15 16.3 4880 19.5 6200 76 75 71 81 79 72 97 1500
W4A-60-4D 6 1.15 19.4 6040 23 6820 76 75 73 82 80 70 115 1500
W4A-75-4D 7.5 1.15 22 7280 27.5 8400 76 75 74 83 80 78 137 1500

MODEL HP SF Rotor Capacity
Amps W Amps W S.F F.L. 3/4 S.F F.L 3/4 Amps (lbs)
W4A-05-4I 0.5 1.6 1.6 720 1.9 960 50 47 43 78 77 70 10 800
W4A-07-4I 0.75 1.5 1.9 912 2.4 1296 65 63 57 81 75 65 12 800 CABLE LEAD OUT LET
45°
STUD (M8 x 1.25), 4 Nos.,
W4A-10-4I 1 1.4 2.5 1248 3.6 1600 66 64 59 82 75 65 18 800 EQUISPACED ON PCD 76.2
W4A-15-4I 1.5 1.3 3.4 1728 4.8 2200 67 65 61 81 78 71 24 800

W4A-20-4I 2 1.25 4.2 2256 5.8 2600 69 67 64 81 80 76 29 800
W4A-30-4I 3 1.15 5.6 3024 7.2 3808 74 72 69 83 82 74 36 1500
W4A-40-4I 4 1.15 7.8 4000 9.5 4704 76 75 72 80 78 72 47 1500 (12.7mm) Min.
Ø1.37” (35mm)
W4A-50-4I 5 1.15 9.1 4840 11 5960 76 75 74 82 81 73 55 1500 Ø1.22” (31mm)
Ø0.61” (15.55mm)
0.5”
W4A-60-4I 6 1.15 11.3 6000 13 6780 76 75 74 82 81 72 65 1500

(38mm)
1.49”
W4A-75-4I 7.5 1.15 13.3 7480 16 8600 75 74 72 83 80 75 80 1500

W4A-100-4I 10 1.15 17.3 9340 20 13165 80 80 79 84 82 78 87 1500
460V, THREE PHASE

Ø3.81”
TECHNICAL & ELECTRICAL DATA (97mm)
3HP & ABOVE

H1 (HEIGHT)
W4A-30-4M 3 1.15 5.1 3140 5.6 3530 72 70.7 67 79 77 73 26 1500

W4A-40-4M 4 1.15 6.6 3950 7.3 4500 76.8 76 73.5 78 76 70 35 1500
W4A-50-4M 5 1.15 8.1 4800 8.8 5450 78.1 77.4 74.7 77 75 70 42 1500
W4A-60-4M 6 1.15 9.7 5770 10.7 6660 78.3 77.9 75.5 78 75 70 52 1500
W4A-75-4M 7.5 1.15 10.9 6880 12.2 7910 80.4 80.3 79 81 79 73 60 1500
W4A-100-4M 10 1.15 14.8 9240 16.6 10630 81.2 81.3 80 81 79 75 82 1500
24
Wellrounder
Specifications
Speed 3450 rpm
Degree of Protection IP 58 / IP 68
CCW - Single Phase
5 HP to 30 HP - 3500 lbs
Down Thrust Load
35 HP to 60 HP - 6000 lbs
Three Phase - 5 HP to 60 HP - Direct On Line (DOL)
Method of Starting
Three Phase - 7.5 HP to 60 HP - Star Delta (SD)
Permanently Connected and Sealed 3/4 Core PVC / Rubber
Cable Lead out
Insulated Flat Cable
High Temperature Motors for 158°F / 194°F can be supplied
Thermal Protection
with PT Sensor and XLPE / PA Winding
* On request motors 440 & 690V can be supplied.
Part Name Type - A Type - N
Shaft Seal / Nitrile Rubber (NBR) / Nitrile Rubber (NBR) /

Mechanical Seal Ceramic - Carbon Ceramic - Carbon
Upper & Lower Housings Cast Iron Cast Iron
Stator Shell SS - 304 / SS - 441 SS - 316
Motor Base SS - 304 SS - 316
Upper Housing Shell SS - 304 SS - 316
Shaft EN-8 EN-8
Shaft Extension 17.4 Ph 17.4 Ph
Sleeves SS - 431 SS - 431
25
Wellrounder
)
m
m
1.5 45°
” (5
02
2.
220V, THREE PHASE DIMENSIONS & WEIGHT DATA
Height H1 Nett Weight Approx.

Lead Out Cable M12 STUD 4 NOS
Motor Model HP Size (Sq.mm) ON PCD 111
mm Inches kg lbs
W6A-50-4D 5 4 734 28.8 40.8 89.9 Ø5.62” (143mm)

W6A-75-4D 7.5 6 804 31.6 50.9 112 Ø3” (76.22mm)
W6A-100-4D 10 6 854 33.6 53.6 118 1.45” (37mm) Ø2.2” (57mm)
(Spline Length)
W6A-125-4D 12.5 10 Ø0.98” (25mm)
884 34.7 55.9 123
W6A-150-4D 15 10
(72.8mm)
924 36.3 63.6 140
(30mm)
2.86”
1.18”
W6A-200-4D 20 10 1004 39.5 72.7 160
W6A-250-4D 25 16 1084 42.6 81.3 179
W6A-300-4D 30 16 1154 45.4 90.9 200
W6A-400-4D 40 16 1229 48.3 93.6 206
220V, THREE PHASE TECHNICAL & ELECTRICAL DATA H1 (HEIGHT)
RATED MAX. S.F. EFF. % Power Factor % Locked Max. Down

MODEL HP SF Rotor Thrust Load
A W A W S.F F.L. 3/4 S.F F.L 3/4 Amps (lbs)
W6A-50-4D 5 1.15 16 4840 18.5 5480 77.5 76.6 76.5 80.9 78.6 76.1 88 3500
W6A-75-4D 7.5 1.15 22 6850 25 7860 80 80.5 79.6 82.5 81.7 77 130 3500
W6A-100-4D 10 1.15 29.5 9280 33.9 10640 82 81.5 80 82.5 82.5 79 175 3500
W6A-125-4D 12.5 1.15 36 11360 41 13020 80.5 81.8 80.6 83.3 82.8 80 216 3500
W6A-150-4D 15 1.15 44 13620 49 15400 80.5 80.8 80.2 82.5 81.2 80.5 265 3500
W6A-200-4D 20 1.15 56 18180 64.4 20940 82 82.5 80 85.3 85.2 82 348 3500
W6A-250-4D 25 1.15 68 22680 78.2 26000 82.5 82.2 81.5 87.2 87.5 83 468 3500
W6A-300-4D 30 1.15 80.5 26880 92 30600 82.5 82 82 83.5 84 82 547 3500
W6A-400-4D 40 1.15 116 36240 133 41700 82.5 82.8 80 82.3 82 80 750 6000
The above mentioned electrical data are applicable for Star-Delta motors also
Note: Star-Delta motors are available from 7.5 H.P. onwards.
26
Wellrounder
)
m
m
1.5 45°
Height H1 Nett Weight Approx. (5
Lead Out Cable ”
Model HP 02
Size (Sq.mm) 2.
mm Inches kg lbs
W6A-60-4I 6.0 2.5 754 29.6 44.3 97.66
W6A-75-4I 7.5 4 804 31.6 49.7 109.52 M12 STUD 4 NOS
ON PCD 111
W6A-100-4I 10 4 854 33.6 54.7 120.69
W6A-125-4I 12.5 6 884 34.7 58 127.91 Ø5.62” (143mm)
W6A-150-4I 15 6 924 36.3 62.8 138.38 Ø3” (76.22mm)
W6A-175-4I 17.5 6 964 37.9 67 147.58 1.45” (37mm) Ø2.2” (57mm)
(Spline Length)
Ø0.98” (25mm)
W6A-200-4I 20 10 1004 39.5 71.2 157.04
W6A-250-4I 25 10 1084 42.6 79.6 175.47
(72.8mm)
(30mm)
2.86”
1.18”
W6A-300-4I 30 10 1154 45.4 85.5 188.43
W6A-400-4I 40 10 1229 48.3 93.7 206.76
W6A-500-4I 50 16 1304 51.2 97.9 215.75
W6A-600-4I 60 16 1379 54.2 99.7 220

H1 (HEIGHT)

W6A-60-4I 6 1.15 11 6000 13 6900 76 75 74 83 82 82 55 3500

W6A-75-4I 7.5 1.15 13.5 7200 15.5 8520 77 76 76 86 85 85 66 3500
W6A-100-4I 10 1.15 17.1 9640 19.5 10900 79 78 78 88 87 85 84 3500
W6A-125-4I 12.5 1.15 20.2 11800 23 13580 80 79 79 89 87 87 104 3500
W6A-150-4I 15 1.15 24.6 13680 28 15500 82 81 80 84 83 82 132 3500
W6A-175-4I 17.5 1.15 24.6 13680 34 15500 82 81 80 84 83 82 132 3500
W6A-200-4I 20 1.15 33 18850 37.5 21580 80 80 80 87 86 85 180 3500
W6A-250-4I 25 1.15 37.5 21760 43 25000 85 86 85 90 91 89 230 3500
W6A-300-4I 30 1.15 47.5 25920 54.6 29600 85 86 85 84 84 83 300 3500
W6A-400-4I 40 1.15 65 36000 75 41300 83.5 84 83.6 83.5 84 81 380 6000
W6A-500-4I 50 1.15 83 44640 95 51320 83 83 82.5 82 82 81 450 6000
W6A-600-4I 60 1.15 97 54200 112 63200 82 83 82 85 84 84 530 6000
27
Wellrounder

Lead Out Cable
Motor Model HP Size (Sq.mm) mm Inches kg lbs
W6A-50-4M 5 2.5 734 28.8 42.1 93

W6A-60-4M 6 4 754 29.6 45 99
W6A-75-4M 7.5 4 804 31.6 50.3 111
W6A-100-4M 10 4 854 33.6 55.8 123
W6A-125-4M 12.5 6 884 34.7 58.5 129
W6A-150-4M 15 6 924 36.3 64 141
W6A-200-4M 20 10 1004 39.5 72.1 159
W6A-250-4M 25 10 1084 42.6 80.2 177
W6A-300-4M 30 10 1154 45.4 86.1 190
W6A-350-4M 35 16 1174 46.1 89 196
W6A-400-4M 40 16 1229 48.3 94 208
W6A-500-4M 50 16 1304 51.2 98.4 217
W6A-600-4M 60 16 1379 54.2 103.4 228
RATED MAX. S.F. EFF. % Power Factor % Locked Max. Down

MODEL HP SF Rotor Thrust Load
W6A-50-4M 5 1.15 7.9 4680 8.5 5120 80.5 79 77.5 76 78.5 75.9 38 3500
W6A-60-4M 6 1.15 9 5900 10.5 6720 81 82 80 83 82 78 48 3500
W6A-75-4M 7.5 1.15 11 7000 12.5 8050 78 79 78.5 81 80 79.5 60 3500
W6A-100-4M 10 1.15 14 9260 16 10600 80 81 80 82 78 77 78 3500
W6A-125-4M 12.5 1.15 17.6 11680 19.8 13400 79.8 80 79.5 84 82 81.5 90 3500
W6A-150-4M 15 1.15 21 13200 23.5 15300 82.5 83 82 81.7 80 79 120 3500
W6A-200-4M 20 1.15 27 18200 31 20800 82 82.5 82 88 86 85.5 165 3500
W6A-250-4M 25 1.15 33 22320 37 25600 82.5 83 82.2 86.8 82.5 82 220 3500
W6A-300-4M 30 1.15 38.8 26750 44.5 30750 82.5 83.5 82 86.5 85 82 260 3500
W6A-350-4M 35 1.15 48 31200 55 35800 82 84 82 82 82 81.5 290 6000
W6A-400-4M 40 1.15 53.5 35760 61.5 41160 83.5 84 83.5 83.3 83.8 83 330 6000
W6A-500-4M 50 1.15 67 44160 77 51500 83 84.5 84 84 83 80 390 6000
W6A-600-4M 60 1.15 85 56400 96 65000 80.5 81 80.5 85 83 79 425 6000
28
Wellrounder
Specifications
Speed 3450 rpm
Version Three Phase - 380 V & 460 V, 60 Hz, A.C Supply
Degree of Protection IP 58 / IP 68
Direction of Rotation Electrically Reversible - Three Phase
50 HP to 60 HP - 10000 lbs
Down Thrust Load
75 HP to 125 HP - 12500 lbs
Three Phase - 50 HP to 125 HP - Direct On Line (DOL)
Method of Starting
Three Phase - 50 HP to 125 HP - Star Delta (SD)
Cable Lead out
PVC / Rubber Insulated Flat Cable
High Temperature Motors for 158°F / 194°F can be
Thermal Protection
supplied with PT Sensor and XLPE / PA Winding
* On request motors 440V & 690V can be supplied.
Part Name Type - B Type - S
Shaft Seal Housing Cast Iron SS - 304 Casted

Shaft Seal / Nitrile Rubber (NBR) / Nitrile Rubber (NBR) /
Mechanical Seal Ceramic - Carbon, SiC - SiC Ceramic - Carbon, SiC - SiC
Upper & Lower Housings Cast Iron SS - 304 Casted
Stator Shell SS - 304 SS - 304
Motor Base Cast Iron SS - 304 Casted
Shaft EN-8 EN-8
Shaft Extension 17.4 Ph 17.4 Ph
Sleeves SS - 431 SS - 431
29
Wellrounder
380V & 460V, THREE PHASE DIMENSIONS & WEIGHT DATA
Lead Out Cable 45°
Motor Model HP Size (Sq.mm)
mm Inches kg lbs 6 STUD 4 NOS
ON PCD 152.4
W8B-500-4M 50 16 1181 46.4 153.3 338

W8B-600-4M 60 16 1231 48.4 164.2 362
(7
4m 2.9
W8B-750-4M 75 35 1281 50.3 179.1 395 m 1”
)(
ty
p)
W8B-850-4M 85 35 1351 53.1 192.7 425
Ø7.71” (196mm)
100 35 1466 57.6 214.5 473 A A
W8B-A00-4M Ø5” (127mm)
2.55” (65mm)
(Spline length) Ø1.5” (38.1mm)
W8B-A25-4M 125 35 1556 61.2 234 516

W8B-500-4M 50 1.15 84 43100 93 49300 86 86 85 80 79 74 500 10000

W8B-600-4M 60 1.15 98 51940 109 59900 87 87 86 83 82 76 590 10000
W8B-750-4M 75 1.15 116 63500 131 73300 86 86 85 85 83 78 710 12500
H1 (HEIGHT)
W8B-850-4M 85 1.15 135 73500 152 84900 87 87 84 85 83 79 820 12500

W8B-A00-4M 100 1.15 155 84850 175 97850 88 88 88 85 83 78 945 12500
W8B-A25-4M 125 1.15 198 107200 223 123000 86 86 86 84 82 76 1200 12500

W8B-500-4M 50 1.15 66 43100 75 49800 86 86 85 83 82 80 450 10000

W8B-600-4M 60 1.15 78 52400 88.5 60200 88 87 86 85 85 83 530 10000
W8B-750-4M 75 1.15 96 64400 110 74200 86 85 84 85 84 82 720 12500
W8B-850-4M 85 1.15 106 72500 122 84000 87 87 85 86 85 83 790 12500
W8B-A00-4M 100 1.15 126 85400 145 99200 87 88 86 85 85 83 940 12500
W8B-A25-4M 125 1.15 155 105600 177 122800 88 88 86 87 86 84 1150 12500
The above mentioned electrical data are applicable for Star-Delta motors also.
30
Wellrounder
Specifications
Speed 3490 rpm
Maximum Liquid Temperature 86°F
Method of Starting
Cable Lead out
Rubber Insulated Flat Cable
Thermal Protection
supplied with PT Sensor and PE2 / PA Winding Type - A/N Type - B
Part Name Type - A Type - N Type - B
Shaft Seal Housing SS - 304 SS - 316 Cast Iron

Nitrile Rubber (NBR) / Nitrile Rubber (NBR) / Nitrile Rubber (NBR) /
Shaft Seal /
Ceramic - Carbon, Ceramic - Carbon, Ceramic - Carbon,
Mechanical Seal
SiC - SiC SiC - SiC SiC - SiC
Upper & Lower Housings SS - 304 SS - 316 Cast Iron
Stator Shell SS - 304 SS - 316 SS - 304
Thrust Pad Carbon Graphite Carbon Graphite Carbon Graphite
Thrust Bearing SS - 420 SS - 420 SS - 420
Diaphragm Nitrile Rubber (NBR) Nitrile Rubber (NBR) Nitrile Rubber (NBR)
Motor Base SS - 304 SS - 316 Cast Iron
31
Wellrounder
380V & 460V - THREE PHASE DIMENSIONS & WEIGHT DATA
Height H1 Nett Weight
Motor Power Lead Out Cable Size (Sq.mm) Approx.
Motor Models
kW HP DOL SD mm Inches kg lbs
W10A-A00-4 75 100 25 16 1226 18.9 239.4 528
W10A-A10-4 81 110 25 16 1266 19.6 259.4 572
W10A-A25-4 93 125 25 16 1316 20.3 273.5 603 Ø9.1” (231mm)
W10A-A50-4 110 150 25 25 1446 22.3 313.4 691 Ø5” (127mm)
W10A-A75-4 130 175 25 25 1546 23.9 341.1 752 Ø1.5” (38.1mm)

A A
W10A-B00-4 150 200 35 35 1736 26.8 364.2 803
(42.9mm) (min)
1.68”
165 225 35 35 1856 28.7 408.2 900
(101.6mm)
W10A-B25-4
4”
W10A-B50-4 185 250 35 35 1956 30.2 439.0 968
380V DOL & SD MOTORS - THREE PHASE TECHNICAL & ELECTRICAL DATA
Motor
Power Max. Cable Size (Sq.mm)
Method Full Load Starting Efficiency Down
Model of Current Current Power Thrust
(A) (%) Factor Load DOL SD
Starting (A)
kW HP (lbs) No. of No. of
Leadouts Leadouts
Ø9.1” (231mm)
W10A-A00-4I 75 100 T/D 150 225 86 0.87 16860 1 2
D
W10A-A10-4I 81 110 T/D 166 249 86 0.87 16860 1 2
W10A-A25-4I 93 125 T/D 181 272 87 0.89 16860 1 2
W10A-A50-4I 110 150 T/D 220 330 87 0.89 16860 2 2
W10A-A75-4I 130 175 T/D 255 383 87 0.89 16860 2 2
W10A-B00-4I 150 200 T/D 290 435 88 0.89 16860 2 2
W10A-B25-4I 165 225 T/D 325 488 88 0.89 16860 2 2
W10A-B50-4I 185 250 T/D 355 533 89 0.90 16860 2 2
460V DOL & SD MOTORS - THREE PHASE TECHNICAL & ELECTRICAL DATA
Motor Cable Size (Sq.mm)
Power Max.
Motor Method Full Load Starting
of Current Current Efficiency Power Down
Model Starting (A) (A) (%) Factor Thrust DOL SD
kW HP Load No. of No. of
(lbs) Leadouts Leadouts
W10A-A00-4M 75 100 T/D 130 194 86 0.87 16860 1 2
W10A-A10-4M 81 110 T/D 143 215 86 0.87 16860 1 2
W10A-A25-4M 93 125 T/D 156 234 87 0.89 16860 1 2
W10A-A50-4M 110 150 T/D 190 285 87 0.89 16860 2 2
W10A-A75-4M 130 175 T/D 220 330 87 0.89 16860 2 2 ALL DIMENSIONS ARE
IN Inches & mm.
W10A-B00-4M 150 200 T/D 250 376 88 0.89 16860 2 2
W10A-B25-4M 165 225 T/D 281 421 88 0.89 16860 2 2
# METHOD OF STARTING : T - 3P / DOL / 60Hz D - 3P / SD / 60Hz
32
Wellrounder
Specifications
Speed 3460 rpm
Minimum Cooling Flow Along the Motor 1.64 ft/sec (86°F), 2 ft/sec (122°F)
Maximum Liquid Temperature 86°F
Shaft Type Key Way
Mounting Standard International Standard
Method of Starting
Permanently Connected and Sealed 3/4 Core Rubber
Cable Lead out
Insulated Flat Cable
Thermal Protection
supplied with PT Sensor and XLPE / PA Winding Type - A/N Type - B
Part Name Type - A Type - N Type - B
Seal Housing SS - 304 SS - 316 Cast Iron

Carbon / Ceramic Carbon / Ceramic
Mechanical Seal SiC - SiC
SiC - SiC* SiC - SiC*
Upper & Lower Housings SS - 304 SS - 316 Cast Iron
Stator Shell SS - 304 SS - 316 SS - 304
Thrust Pad SS / Carbon SS / Carbon SS / Carbon
Thrust Bearing SS / Carbon SS / Carbon SS / Carbon
Diaphragm Nitrile Rubber (NBR) Nitrile Rubber (NBR) Nitrile Rubber (NBR)
Motor Base SS - 304 SS - 316 Cast Iron
Shaft SS - 304 Duplex Steel SS - 304
* Optional.
33
Wellrounder
380V & 460V - THREE PHASE DIMENSIONS & WEIGHT DATA
Lead Out Cable Nett Weight
Motor Power Size (Sq.mm) Height H1
Model Approx.
kW HP 380V 460V mm Inches kg lbs
W12A-B50-4 185 250 95 70 1762 69.4 413 970 Ø10.7” (273mm)

W12A-C00-4 225 300 70 95 1833 72.2 461.3 1017 Ø7.5” (190.5mm)
Ø0.62” (16mm)
W12A-C50-4 260 350 70 120 1920 75.6 497.1 1096
W12A-D00-4 300 400 95 70 1996 78.6 526.1 1160
W12A-D50-4 330 450 95 95 2090 82.3 566 1248
Ø0.82” Ø2.32”
W12A-E00-4 375 500 120 95 2141 84.5 585.1 1290 (21mm) (59mm)
W12A-E50-4 400 550 150 120 2210 87.0 611 1347
W12A-F00-4 450 600 150 120 2270 89.4 636.8 1404
Ø5” (127mm)
Ø2.16” (55mm)
380 V - THREE PHASE TECHNICAL & ELECTRICAL DATA Ø5.01”
Ø4.25” (127.3mm)
Motor Full Starting Full load Max. Down (108mm)
Power Method No. of 0.19” (5mm)
Model Load Current Power Thrust 1.18”
of Starting Eff.% Leadouts
kW HP Max (A) (A) Factor Load (lbs) (30mm)
W12A-B50-4I 185 250 T 380 1938 87 85 13500 3

W12A-C00-4I 225 300 T/D 465 2279 87 85 13500 6
W12A-C50-4I 260 350 T/D 535 2568 87 85 13500 6
W12A-D00-4I 300 400 T/D 625 3125 86 85 13500 6
W12A-D50-4I 330 450 T/D 690 3312 86 85 13500 6 Ø10.7” (273mm)
W12A-E00-4I 375 500 T/D 780 3900 86 85 13500 6
W12A-E50-4I 400 550 T/D 855 4446 85 84 13500 6
W12A-F00-4I 450 600 T/D 960 5088 85 84 13500 6 H1
460 V - THREE PHASE TECHNICAL & ELECTRICAL DATA

Motor Full Starting Full load Max. Down
Power Method No. of
Model Load Current Power Thrust
of Starting Eff.% Leadouts
kW HP Max (A) (A) Factor Load (lbs)
W12A-B50-4M 185 250 T 314 1601 87 85 13500 3
W12A-C00-4M 225 300 T 384 1882 87 85 13500 3
W12A-C50-4M 260 350 T 442 2122 87 85 13500 3
W12A-D00-4M 300 400 T/D 516 2580 86 85 13500 6
W12A-D50-4M 330 450 T/D 570 2736 86 85 13500 6
W12A-E00-4M 375 500 T/D 644 3220 86 85 13500 6
W12A-E50-4M 400 550 T/D 706 3671 85 84 13500 6
ALL DIMENSIONS ARE
W12A-F00-4M 450 600 T/D 793 4203 85 84 13500 6
IN Inches & mm.
# METHOD OF STARTING : T - 3P / DOL / 60Hz D - 3P / SD / 60Hz
34
CABLE SELECTION TABLE

1Ph, 2/3 WIRE MOTORS, MAXIMUM LENGTH OF COPPER CABLE IN FEET
Motor
Rating CABLE SIZE IN AMERICAN WIRE GAGE
VOLT HP 14 12 10 8 6 4 3 2 1 1/0 2/0 3/0 4/0
0.5 95 151 239 381 604 963 1213 1529 1928 2429 3065 3865 4873
110V 0.75 Calculate Cable Length (FEET) 75 119 190 302 479 764 962 1213 1529 1926 2431 3065 3865
1 68 108 172 274 434 692 872 1099 1386 1746 2203 2778 3503
1.5 54 87 138 219 347 554 697 879 1108 1397 1762 2222 2802
0.5 345 550 1390 2203 3515 4427 5584 7038 8868
0.75 262 417 1055 1672 2668 3360 4238 5342 6731 8493
220V 1 203 324 819 1297 2069 2607 3288 4144 5221 6588
1.5 177 282 712 1129 1800 2268 2860 3605 4542 5731
2 165 262 664 1052 1677 2113 2665 3359 4232 5340
3 122 195 492 780 1244 1567 1976 2491 3139 3960
5 313 496 791 996 1256 1583 1995 2518
THREE PHASE 3 WIRE (D.O.L.) MOTOR MAXIMUM LENGTH OF COPPER CABLE - SINGLE CABLE PER PHASE
Motor
Rating CABLE SIZE IN AMERICAN WIRE GAUGE
VOLT HP 14 12 10 8 6 4 3 2 1 1/0 2/0 3/0 4/0
0.5 842 1341 2130 3391 5373
0.8 607 967 1535 2445 3874 6179
1.0 475 756 1200 1911 3029 4831 6085
1.5 358 569 904 1440 2282 3640 4585 5782
2.0 272 433 688 1095 1735 2768 3486 4397 5542
Calculate Cable Length (FEET)
3.0 218 346 550 876 1388 2214 2789 3518 4434 5587 7049
4.0 155 247 393 626 992 1582 1992 2513 3167 3991 5035
5.0 112 178 282 449 712 1135 1430 1804 2274 2865 3615 4559 5748
6.0 95 151 239 381 604 963 1213 1529 1928 2429 3065 3865 4873
7.5 126 200 319 505 805 1014 1279 1612 2032 2563 3233 4076
220V
10.0 99 157 250 397 633 797 1005 1267 1596 2014 2540 3202
12.5 134 214 339 540 680 858 1081 1363 1719 2168 2734
15.0 112 179 283 452 569 718 905 1140 1439 1814 2287
17.5 97 154 244 388 489 617 778 980 1237 1560 1966
20.0 136 216 344 433 546 688 868 1095 1380 1740
25.0 112 178 283 357 450 567 714 901 1137 1433
30.0 151 241 303 382 482 607 766 966 1218
35.0 108 172 217 274 345 435 549 692 873
40.0 147 185 233 293 370 466 588 742
50.0 130 164 206 260 328 414 522 658
THREE PHASE 3 WIRE (S.D) MOTOR MAXIMUM LENGTH OF COPPER CABLE

Motor
Rating CABLE SIZE IN AMERICAN WIRE GAUGE
VOLT HP 14 12 10 8 6 4 3 2 1 1/0 2/0 3/0 4/0
0.5 1769 2816 4472 7121 11284
0.8 1275 2030 3224 5134 8135 12976
1.0 997 1587 2521 4014 6360 10145 12779
1.5 751 1196 1899 3024 4792 7643 9628 12143
2.0 571 909 1444 2299 3644 5812 7321 9234 11639
3.0 457 727 1155 1840 2915 4650 5857 7387 9311 11732 14803
4.0 326 520 825 1314 2082 3321 4184 5276 6651 8380 10574
5.0 234 373 592 943 1495 2384 3004 3788 4775 6017 7591 9573 12071
6.0 199 316 502 800 1267 2022 2547 3212 4048 5101 6436 8116 10234
7.5 264 420 669 1060 1691 2130 2686 3386 4266 5383 6788 8559
220V
10.0 208 330 526 833 1329 1673 2111 2660 3352 4229 5334 6725
12.5 282 449 711 1134 1429 1802 2271 2862 3610 4553 5741
15.0 236 375 595 949 1195 1508 1900 2394 3021 3810 4804
17.5 203 323 511 816 1028 1296 1633 2058 2597 3275 4129
20.0 286 453 722 909 1147 1446 1822 2299 2899 3655
25.0 235 373 595 749 945 1191 1500 1893 2387 3010
30.0 317 505 637 803 1012 1275 1609 2029 2558
35.0 227 362 456 575 725 914 1153 1454 1833
40.0 308 388 489 616 776 979 1235 1557
50.0 273 344 433 546 688 868 1095 1381
35

THREE PHASE 3 WIRE (D.O.L.) MOTOR MAXIMUM LENGTH OF COPPER CABLE - SINGLE CABLE PER PHASE
Motor
Rating CABLE SIZE IN AMERICAN WIRE GAGE MCM Copper wire size
VOLT HP 14 12 10 8 6 4 3 2 1 1/0 2/0 3/0 4/0 250 300 350 400 500
0.5 2374 3779 6002 9556 15143
0.8 1879 2991 4751 7565 11988
1.0 1253 1994 3168 5044 7992
1.5 940 1496 2376 3783 5994
2.0 778 1238 1966 3131 4961
3.0 626 997 1584 2522 3996
4.0 475 756 1200 1911 3029
5.0 544 864 1376 2180
6.0 460 731 1164 1844 2942
7.5 374 594 946 1499 2390
10.0 288 457 727 1153 1839
12.5 239 380 605 959 1530

15.0 322 513 813 1296 1633
17.5 291 463 733 1170 1587
20.0 362 573 954 1301 1894
25.0 321 509 812 983 1240 1563
380V 30.0 426 680 922 1163 1466 1848
35.0 603 818 1031 1300 1638
40.0 503 634 799 887 1117 1410 1778
50.0 403 507 640 806 894 1128 1293 1630
60.0 477 602 618 779 983 1183 1421
75.0 558 552 696 798 1007 1270
85.0 516 511 643 738 931 1173
100.0 438 551 696 877 974 886
125.0 442 558 704 887 807 1145
150.0 534 673 849 748 1061
175.0 660 661 937 994
200.0 500 709 745
225.0 647 754 798 1078
250.0 492 574 607 820
300.0 552 584 788
350.0 507 685
400.0 434 586
THREE PHASE 3 WIRE (S.D) MOTOR MAXIMUM LENGTH OF COPPER CABLE

Motor
VOLT HP 14 12 10 8 6 4 3 2 1 1/0 2/0 3/0 4/0 250 300 350 400 500
0.5 4985 7935 12604 20068 31800
0.8 3946 6282 9978 15887 25175
1.0 2631 4188 6652 10592 16784
1.5 1973 3141 4989 7944 12588
2.0 1633 2599 4129 6574 10417
3.0 1315 2094 3326 5296 8392
4.0 997 1587 2521 4014 6360
5.0 1142 1814 2889 4577
6.0 966 1535 2444 3873 6178
7.5 785 1247 1986 3147 5020
10.0 604 959 1528 2421 3861
12.5 503 798 1271 2014 3213

15.0 676 1077 1707 2723 3429
17.5 610 972 1540 2457 3333
20.0 759 1203 2003 2733 3977
25.0 674 1069 1705 2065 2604 3282
380V 30.0 895 1428 1937 2443 3079 3880
35.0 1266 1717 2165 2729 3439
40.0 1057 1331 1679 1862 2346 2961 3734
50.0 845 1065 1343 1693 1877 2368 2715 3424
60.0 1002 1264 1298 1636 2064 2485 2984
75.0 1171 1160 1462 1677 2114 2666
85.0 1083 1072 1351 1550 1954 2464
100.0 919 1158 1461 1843 2044 1860
125.0 929 1172 1478 1863 1695 2405
150.0 1121 1414 1783 1570 2228
175.0 1387 1388 1969 2088
200.0 1050 1489 1564
225.0 1358 1584 1677 2264
250.0 1033 1205 1275 1722
300.0 1158 1226 1655
350.0 1066 1439
400.0 912 1231
36

3Ph, 460V, 3 WIRE (DOL) MOTORS, MAXIMUM LENGTH OF COPPER CABLE IN FEET
Motor
VOLT HP 14 12 10 8 6 4 3 2 1 1/0 2/0 3/0 4/0 250 300 350 400 500
0.5 3770 6020 9460
0.75 2730 4350 6850
1 2300 3670 5770 9070
1.5 1700 3710 4270 6730
2 1300 2070 3270 5150 8050
3 1000 1600 2520 3970 6200
4 748 1190 1891 3011 4771
5 590 950 1500 2360 3700 5750
5.5 557 887 1409 2243 3554 5669
6 510 812 1290 2054 3255 4933
7.5 420 680 1070 1690 2640 4100 5100 6260 7180
10 310 500 790 1250 1960 3050 3800 4680 5750 7050
12.5 410 651 1036 1642 2619 3299 4086 4963 6136 7593
340 540 850 1340
15 2090 2600 3200 3930 4810 5900 7110

20 410 650 1030 1610 2000 2470 3040 3730 4580 5530
25 530 830 1300 1620 1990 2450 3010 3700 4470 5430
30 430 680 1070 1330 1640 2030 2490 3060 3700 4500 5128 5850
35 580 926 1145 1418 1753 2124 2680 3177 3835 4264 4960
40 500 790 980 1210 1490 1830 2250 2710 3192 3720 4242
460V 640 1480
50 800 980 1210 1810 2190 2650 2998 3409 3830 4171 4842
60 540 670 830 1020 1250 1540 1850 2240 2532 2881 3230 3529 4188
75 680 840 1030 1260 1520 1850 2088 2390 2688 2940 3428
85 745 919 1136 1371 1652 1884 2127 2291 2491 2909
100 620 760 940 1130 1380 1550 1782 2000 2182 2540
110 696 877 1048 1107 1364 1447 1531 1860
125 740 890 1000 1209 1381 1549 1691 1949
150 760 920 1040 1182 1330 1452 1680
175 810 921 1052 1181 1292 1501
200 802 910 1018 1122 1300
225 764 886 984 1132
250 755 886 984
300 623 755 837
350 492 623 689
400 361 492 525
450 327 346 467
500 289 306 413
550 264 279 377
600 235 249 336
3Ph, 460V, 3 WIRE (DOL) MOTORS, MAXIMUM LENGTH OF COPPER CABLE IN FEET
Motor
VOLT HP 14 12 10 8 6 4 3 2 1 1/0 2/0 3/0 4/0 250 300 350 400 500
0.5 880 1420 2250 3450 5550 8620
0.75 743 1182 1878 2990 4739 7559
1 681 1083 1720 2739 4340 6923
1.5 630 1020 1600 2530 3960 6150 7650 9390
2 460 750 1180 1870 2940 4570 5700 7020 8620
3 368 585 930 1480 2345 3741 4713 5943 7491
4 310 510 810 1270 2010 3130 3900 4800 5800 7210 8850
5 230 380 610 970 1540 2410 3000 3700 4560 5590 6870 8290
5.5 190 310 490 790 1240 1950 2430 2980 3670 4510 5550 6700
6 250 410 640 1020 1600 1990 2460 3040 3730 4590 5550
7.5 335 533 844 1347 1697 2140 2697 3398 4288 5002
10 300 480 750 1180 1470 1810 2230 2740 3370 4080
12.5 370 590 960 1200 1470 1810 2220 2710 3280
15 320 500 810 1000 1240 1530 1870 2310 2770

20 420 660 810 1020 1260 1540 1890 2280
25 577 727 916 1155 1341 1691 2133 8140
30 500 610 760 930 1140 1410 1690 6750 7690 8730
35 507 640 806 1016 1282 1478 5965 6822 7259
40 470 590 730 880 1110 1330 4930 5590 6370
460V
50 510 630 770 950 1140 3970 4510 5130 5740 6270 7270
60 550 680 830 1000 3360 3810 4330 4860 5310 6510
75 590 730 880 2770 3150 3600 4050 4420 5160
85 623 755 2459 2691 3272 3563 3771 4909
100 591 2070 2340 2680 3010 3280 3820
110 1863 2039 2480 2893 3061 3307
125 1500 1830 2080 2340 2550 2940
150 1380 1570 1790 2000 2180 2530
175 1220 1390 1580 1780 1950 2270
200 1070 1210 1380 1550 1690 1970
225 919 1050 1247 1411 1558 1837
250 820 951 1116 1280 1427 1706
300 722 853 984 1116 1296 1575
350 623 722 853 951 1148 1444
400 623 722 787 1017 1312
450 411 584 681 721 973
500 364 517 603 638 861
550 332 471 550 582 785
600 296 420 489 518 699
37
CONVERSION TABLE
FLOW RATE
US-GPM lps lpm m3/h ft3/h ft3/min imp - GPM US - barrel / day
1 0.063 3.785 0.2271 8.0209 0.1337 0.833 34.286
15.850 1 60 3.6 127.133 2.1189 13.2 543.439
0.264 0.017 1 0.06 2.1189 0.0353 0.22 9.057
4.403 0.278 16.667 1 35.3147 0.5886 3.666 150.955
0.125 0.008 0.472 0.0283 1 0.0167 0.104 4.275
7.48 0.472 28.317 1.6990 60 1 6.229 256.475
1.201 0.076 4.546 0.2728 9.6326 0.1605 1 41.175
0.029 0.002 0.110 0.0066 0.2339 0.0039 0.024 1
LIQUID
US-Gallon m3 Litre (L) Milliliter (ml) lmp. Gallon ft3
1 0.00378 3.785 3785 0.8327 0.1337
264.2 1 1000 1X106 220 35.3147
0.2642 0.001 1 1000 0.22 0.0353
2.642X10-4 1X10-6 0.001 1 2.2X10-4 3.53X10-5
1.201 0.00455 4.546 4546 1 0.1605
7.4805 0.0283 28.317 28317 6.2288 1
LIQUID HEAD AND PRESSURE

foot for water Meter of Millimeter of Inch of Mercury
Psi N/m2 (Pa) kPa bar Kgf/cm2
ft H2O water m H2O Mercury mm Hg in Hg
1 6895 6.895 0.069 0.0703 2.31 0.703 51.72 2.036
1.45X10-4 1 0.001 1X10-5 1.02X10-5 3.35X10-4 1.02X10 -4
0.0075 2.95X10-4
0.145 1000 1 0.01 0.0102 0.335 0.102 7.5 0.295
14.5 1X105 100 1 1.02 33.52 10.2 750.1 29.53
14.22 98.067 98.07 0.981 1 32.81 10 735.6 28.96
0.433 2984 2.984 0.030 0.0305 1 0.305 22.42 0.882
1.42 9789 9.789 0.098 0.1 3.28 1 73.42 2.891
0.019 133.3 0.133 0.0013 0.0014 0.045 0.014 1 0.039
0.491 3386 3.386 0.0338 0.0345 1.133 0.0345 25.4 1
LENGTH
Inch (in) Millimeter (mm) Centimeter (cm) Meter (m) Foot (ft) Yard (yd)
1 25.4 2.54 0.0254 0.0833 0.0278
0.0394 1 0.10 0.001 0.0033 0.0011
0.3937 10 1 0.01 0.0328 0.0109
39.3701 1000 100 1 3.2808 1.0936
12 304.8 30.48 0.3048 1 0.3333
36 914.4 91.44 0.9144 3 1
MASS 1 kilometer = 1000 metre = 0.62137 mile; 1 mile = 1609.34 metre = 1.60934 kilometre
Pound (lb) Kilogram (kg) Hundred Weight (cwt) Tonne (t) Ton long (tn) short Ton (sh tn)
1 0.454 0.0089 4.54x10-4 4.46x10-4 5.0x10-4
2.205 1 0.0197 0.001 9.84x10-4 0.0011
112 50.802 1 0.0508 0.05 0.056
2204.6 1000 19.684 1 0.9842 1.1023
2240 1016 20 1.0161 1 1.1020
2000 907.2 17.857 0.9072 0.8929 1
TEMPERATURE
To Convert From To Use Formula
Celsius, tC Kelvin, tK tK = tC + 273.15
Fahrenheit, tF Kelvin, tK tK = (tF + 459.67) / 1.8
Celsius, tC Fahrenheit, tF tF = 1.8 tC + 32
Fahrenheit, tF Celsius, tC tC = (tF - 32) / 1.8
Kelvin, tK Celsius, tC tC = tK - 273.15
Kelvin, tK Fahrenheit, tF tF = 1.8 tK - 459.67
38
NOTES
..................................................................
..................................................................
..................................................................
..................................................................
..................................................................
..................................................................
..................................................................
..................................................................
..................................................................
..................................................................
..................................................................
..................................................................
..................................................................
NOTES
..................................................................
..................................................................
..................................................................
..................................................................
..................................................................
..................................................................
..................................................................
..................................................................
..................................................................
..................................................................
..................................................................
..................................................................
..................................................................

Cri Motores

Uploaded by

Copyright:

Available Formats

Cri Motores

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Cri Motores

Uploaded by

Copyright:

Available Formats

An ISO 9001, ISO 14001 & OHSAS 18001 Company

Vision, Mission and Values

To be the industry leader providing best - in - class fluid management

We will achieve this through our dedicated efforts to enhance the

MODEL IDENTIFICATION CODE

DEEPWELL SUBMERSIBLE MOTOR

(Applicable for special models)

NOMINAL MOTOR DIAMETER VOLTAGE (This digit is applicable

MOTOR POWER (in HP) PHASE / CONNECTION /

OIL FILLED SUBMERSIBLE MOTORS

Nominal Diameter : 4" "L" Series

 High operating efficiency and lesser power consumption

 Extremely hardwearing ball & angular contact bearings

 Corrosive resistance stainless steel body

 Filled with non-toxic oil

 Can be easily dismantled and repaired

 Residential  Industrial water supply  Ponds

OIL FILLED SUBMERSIBLE MOTORS

Nominal Diameter : 4" "L" Series

Outer Shell SS - 304

OIL FILLED SUBMERSIBLE MOTORS

Nominal Diameter : 4" "L" Series

Part No. Part Name

10.00 Motor base

OIL FILLED SUBMERSIBLE MOTORS

L4A-10-3A 0.75 1 1.5 0.98 65 - 60 12.9 46 337 381 15 8 17.6 1.5

220V, SINGLE PHASE ELECTRICAL & DIMENSIONAL DATA

220V, THREE PHASE ELECTRICAL & DIMENSIONAL DATA

RESIN FILLED ENCAPSULATED SUBMERSIBLE MOTORS

Nominal Diameter : 4" & 6" "R" Series

dimensions of motors are in accordance with NEMA standards.

 Residential  Irrigation  Pressure boosting units

RESIN FILLED ENCAPSULATED SUBMERSIBLE MOTORS

Nominal Diameter : 4" "R" Series

Housings Shell SS - 304

RESIN FILLED ENCAPSULATED SUBMERSIBLE MOTORS

Nominal Diameter : 4" "R" Series

* 2 wire motor’s stator is in-built with permanent split capacitor

RESIN FILLED ENCAPSULATED SUBMERSIBLE MOTORS

Nominal Diameter : 4" "R" Series

RESIN FILLED ENCAPSULATED SUBMERSIBLE MOTORS

Nominal Diameter : 4" "R" Series

220V, THREE PHASE, 3 WIRE MOTORS TECHNICAL & ELECTRICAL DATA

RESIN FILLED ENCAPSULATED SUBMERSIBLE MOTORS

Nominal Diameter : 4" "R" Series

380V, THREE PHASE, 3 WIRE MOTORS TECHNICAL & ELECTRICAL DATA

460V, THREE PHASE, 3 WIRE MOTORS TECHNICAL & ELECTRICAL DATA

SINGLE PHASE 2 & 3 WIRE MOTORS DIMENSIONS & WEIGHT DATA

RESIN FILLED ENCAPSULATED SUBMERSIBLE MOTORS

Nominal Diameter : 6" "R" Series

Housings Shell SS - 304

RESIN FILLED ENCAPSULATED SUBMERSIBLE MOTORS

Nominal Diameter : 6" "R" Series

230V, THREE PHASE TECHNICAL & ELECTRICAL DATA

380V, THREE PHASE TECHNICAL & ELECTRICAL DATA

460V, THREE PHASE TECHNICAL & ELECTRICAL DATA

THREE PHASE, 3 WIRE MOTORS DIMENSIONS & WEIGHT DATA

WATER FILLED REWINDABLE SUBMERSIBLE MOTORS

 Water cooled Re-windable motor

WATER FILLED REWINDABLE SUBMERSIBLE MOTORS