Parts Catalog: 0CI00-M09100EN
Parts Catalog: 0CI00-M09100EN
Parts Catalog: 0CI00-M09100EN
0CI00-M09100EN
2.This parts catalog dose not contain the technical data needed for maintenance service
3.The illustrations used in this parts catalog have been simplified for clarity.
4.Be sure to use only Yanmar genuine part for repairs. If imitation parts are used,
it may cause engine defects.
5.Cross Reference
The sheet shows the reference between pump Assembly part number and PUMP ID.
729221-51360
1. FUEL INJECTION PUMP
2. GOVERNOR
0CI00-M09100
(A)=729221-51360 (D)=
Fig.1. FUEL INJECTION PUMP (B)= (E)=
(C)= (F)=
No. Lev. Parts No. Description Q'ty I R
(A) (B) (C) (D) (E) (F)
1 1 729221-51360 PUMP ASSY, INJECTION 1 1
4 2 129155-51020 STUD 2
5 2 119810-51040 CAMSHAFT 1
6 2 129155-51050 BEARING, 17BM001D 1
7 2 129155-51060 SUPPORT, CAMSHAFT 1
8 2 122710-51090 KEY 1
9 2 129506-51100 PLUNGER ASSY 3
12 2 129155-51140 PIN 3
13 2 174307-51170 RETAINER, SPRING A 3
14 2 129155-51180 RETAINER, SPRING 3
15 2 124950-51190 SPRING, PLUNGER 3
16 2 129155-51200 TAPPET ASSY 3
23 2 129155-51270 STOPPER, TAPPET 3
24 2 129155-51280 O-RING, S6 3
25 2 129100-51300 VALVE ASSY, DELIVERY 3
28 2 129155-51320 SPRING, DELIVERY 3
29 2 129155-51340 RETAINER 3
30 2 124550-51350 GASKET, DELIVERY 3
31 2 124550-51370 O-RING 3
32 2 129155-51370 STOPPER, VALVE 3
33 2 129155-51380 STOPPER 2
34 2 129155-51390 STOPPER 2
35 2 129155-51400 DEFLECTOR 1
36 2 129155-51410 BOLT 1
37 2 129155-51420 PLUG, M16 1
38 2 129155-51450 SHIM SET, ADJUSTING 1
43 2 129155-51500 RACK, CONTROL 1
44 2 129155-51521 BUSH, RACK 1
45 2 129155-51530 SPACER 1
46 2 129155-51540 CIRCLIP 1
47 2 129155-51550 PINION, CONTROL 3
48 2 122117-51560 SCREW 3
49 2 174307-51560 PINION 3
50 2 129155-51570 PLUG, M12 1
51 2 129155-51580 O-RING 1
52 2 129155-51591 SPRING, RACK 1
53 2 129155-51600 SHIM SET, ADJUSTING 3
72 2 129155-51700 COVER 1
73 2 129155-51710 GASKET 1
74 2 129155-51750 COVER 1
75 2 129155-51760 GASKET 1
76 2 129155-51790 STOOPER, RACK 1
77 2 129156-51910 LABEL, CAUTION 1
78 2 129155-51930 SPACER, T=3.25 1
79 2 129155-51940 SPACER, T=1.5 1
80 2 22217-060000 WASHER, SPRING 6 2
81 2 22351-050010 PIN, SPRING 5.0X10 2
82 2 24101-063034 BEARING, BALL 6303 1
83 2 24341-000160 O-RING, 1AS16.0 1
Remarks
84 2 26022-050102 SCREW, M5X10 8
(1)GOVERNOR ASSY(FIG.2)IS
INCORPORATED IN THIS FUEL 85 2 26022-060162 SCREW, M6X16 4
INJECTION PUMP ASSY(REF.NO.1)
++ CONTINUE ++ Copyright (C) YANMAR CO., LTD. All RightsReserved.
0CI00-M09100
(A)=729221-51360 (D)=
Fig.1. FUEL INJECTION PUMP (B)= (E)=
(C)= (F)=
No. Lev. Parts No. Description Q'ty I R
(A) (B) (C) (D) (E) (F)
86 2 26116-050302 BOLT, M5X 30 PLATED 2
87 2 22217-050000 WASHER, SPRING 5 2
88 2 26716-060002 NUT, M6 2
89 2 22190-160002 WASHER, SEAL 16 1
92 2 129155-52050 GASKET 1
93 2 129100-52200 COVER 1
Remarks
(1)GOVERNOR ASSY(FIG.2)IS
INCORPORATED IN THIS FUEL
INJECTION PUMP ASSY(REF.NO.1)
Copyright (C) YANMAR CO., LTD. All RightsReserved.
0CI00-M09100
(A)=729221-51360 (D)=
Fig.2. GOVERNOR (B)= (E)=
(C)= (F)=
No. Lev. Parts No. Description Q'ty I R
(A) (B) (C) (D) (E) (F)
2 2 129155-51280 O-RING, S6 2
4 2 129155-61050 GASKET 1
5 2 129155-61060 COVER, GOVERNOR CASE 1
6 2 129155-61070 GASKET 1
7 2 129155-61120 LINK, L=30 MARK 0 1 1
8 2 129155-61130 LINK, L=31 MARK 1 1 1
9 2 129155-61140 LINK, L=30.5 MARK 05 1 1
10 2 129155-61201 WEIGHT ASSY,GOVERNOR 1
14 2 129155-61341 SLEEVE 1 2
15 2 129155-61350 SLEEVE, L=24.9 1 2
16 2 129155-61360 SLEEVE, L=25.2 1 2
17 2 129100-61400 SHAFT ASSY 1
20 2 129155-61430 SPACER 1
24 2 129155-61450 BOLT, LIMITER 1
25 2 129155-61460 BOLT, IDLE 1
26 2 129155-61480 SPACER ASSY 2
31 2 129155-61490 SHAFT 1
32 2 119843-61500 LEVER ASSY, GOVERNOR 1
33 3 174307-51700 SHIM SET 2
51 3 129155-61540 SHIFTER 1
52 3 119843-61540 SPRING, SET 1
53 3 22217-050000 WASHER, SPRING 5 1
54 3 22272-000040 RING, E- 4 1
55 3 26113-050082 BOLT, M5X 8 1
56 2 129155-61810 PIN 1
57 2 129155-61830 O-RING, S10 1
58 2 129155-61950 BOLT 1
59 2 124550-66370 NUT, M6 1
60 2 22117-040000 WASHER, 4 1
61 2 22190-060002 WASHER, SEAL 6 1
62 2 22190-100002 WASHER, SEAL 10 1
63 2 22190-120002 WASHER, SEAL 12 2
64 2 129116-61890 SUPPORT 1
65 2 22272-000060 RING, E- 6 2
66 2 22287-120000 WASHER, 12 1
67 2 22372-040000 PIN, SNAP 4 2
68 2 23887-100002 PLUG, 10 1
69 2 24311-240100 O-RING, 1AP10A 1
70 2 26022-050102 SCREW, M5X10 2
71 2 26023-050102 SCREW, M5X10 2
72 2 26106-060202 BOLT, M6X 20 PLATED 5
73 2 26106-060252 BOLT, M6X 25 PLATED 1
74 2 26756-060002 NUT, LOCK M6 1
75 2 26776-120002 NUT, LOCK M12 2
76 1 129100-61650 SPRING, CONTROLLER 1
Remarks 77 1 129129-61801 LEVER ASSY, STOP 1
(1) SELECTIVE PARTS; CERTAIN THE
78 1 129100-61440 LEVER, CONTROL 1
CLASSIFICATION MARK,THEN PLACE
YOUR ORDER.(REF.TO ILLUSTRATION). 79 1 129155-61470 BOLT, CONTROL 1
(2) SELECTIVE PARTS. 80 1 171353-61700 SPRING, GOVERNOR 1
* THIS FIGURE(GOVERNOR ASSY)IS 81 1 26687-120002 NUT, CAP M12 1
INCORPORATED IN THE FUEL INJECTION 82 1 119620-66820 JOINT 1
PUMP ASSY(FIG.1).
Remarks
(1) SELECTIVE PARTS; CERTAIN THE
CLASSIFICATION MARK,THEN PLACE
YOUR ORDER.(REF.TO ILLUSTRATION).
(2) SELECTIVE PARTS.
* THIS FIGURE(GOVERNOR ASSY)IS
INCORPORATED IN THE FUEL INJECTION
PUMP ASSY(FIG.1).