Datasheet: uni RTB M2
EN
Plastic Modular Belt
Series uni RTB Type M2
Straight running belt
P
Nominal pitch: 50.8 mm (2.00 in)
S Surface type: Roller Top
Surface opening: Closed
STANDARD
Backflex radius: 65.0 mm (2.56 in)
T
n uni Snap link (pinless)
o
ecti
dir
ning V
Run
mm in mm in
Belt material & color POM-S B P
(Nominal)
50.8 2.00 T 16.0 0.63
S 6.0 0.24 V 2.0 0.08
Roller material & color POM-NL O
Roller Positions
STRAIGHT RUNNING
Cover plate material & color POM-NL O
Pin for roller material & color SS304
00° 30° 60° 90° 120° 150°
Non standard material and color: See uni Material and Color Overview.
Permissible tensile force Belt weight Number of wear strips
(Belt/pin material) (Belt/pin material) *Min. No. (Min. No.)
Belt width drive
POM-S POM-S sprocket **Carry **Return
per shaft (pcs) (pcs)
mm in N lbf kg/m lb/ft
153 6.0 4208 946 2.2 1.49 2 2 2
PITCH 50.8 MM/2.00 IN
204 8.0 5611 1261 3.0 1.99 2 2 2
255 10.0 7014 1577 3.7 2.49 2 2 2
306 12.1 8417 1892 4.4 2.98 3 3 2
357 14.1 9821 2208 5.2 3.48 3 3 2
408 16.1 11224 2523 5.9 3.98 3 3 2
459 18.1 12627 2839 6.7 4.47 4 4 2
510 20.1 14031 3154 7.4 4.97 4 4 2
561 22.1 15434 3470 8.1 5.47 4 4 2
612 24.1 16837 3785 8.9 5.97 5 5 3
663 26.1 18240 4100 9.6 6.46 5 5 3
Additional standard belt widths are available in steps of 51.0 mm (2.01 in).
1989 78.3 54698 12296 28.8 19.38 14 14 7
Additional standard belt widths are available in steps of 51.0 mm (2.01 in).
2958 116.5 81345 18286 42.9 28.82 20 20 10
General belt tolerance is +0/-0.4% at 23°C/73°F and 50% RH. For exact belt width contact Customer Service. Non standard belt width on request.
*Max. Load per Drive Sprocket. Belt material: POM-S 2000 N (450 lbf).
**Max. Spacing between wear strips, Carry: 152 mm (6 in); Return: 304 mm (12 in).
= Single Link
Datasheet: uni RTB M2
Sprocket
Double row/Two way
Single row/One way
Dimension
Dimension
PA6 LG
Bore size
diameter
diameter
diameter
Machined PA6 N
Overall
Pitch-
Hub-
No. of teeth
B
0.75
1.00
1.25
1.50
2.50
0.78
0.98
1.18
1.57
2.36
3.54
in
Pilot bore
Molded
20.0
25.0
30.0
40.0
60.0
90.0
19.1
25.4
31.8
38.1
63.5
mm
mm in mm in mm in mm in mm in
Z08 x 132.9 5.23 132.8 5.23 65 2.56 53.3 2.10 74.6 2.93 x x
Z10 x 166.3 6.55 164.4 6.47 65 2.56 70.2 2.76 90.4 3.56 x x
Z10 166.3 6.55 164.4 6.47 120 4.72 70.2 2.76 90.4 3.56 x x
Z12 x 198.6 7.82 196.3 7.73 65 2.56 86.8 3.42 106.3 4.18 x x
Z12 198.6 7.82 196.3 7.73 120 4.72 86.8 3.42 106.3 4.18 x x
Z16 x 263.8 10.39 260.4 10.25 150 5.90 119.7 4.71 138.3 5.44 x x
Non standard material
Molded sprocket Molded sprocket Machined sprocket Machined sprocket and color: See uni
Material and Color
Overview.
Other sprocket sizes are available upon request.
Two-part sprocket are available upon request.
Round bores are always delivered with keyway.
Other bore sizes are available upon request.
uni Retainer Rings: See uni Retainer Ring data sheet.
Width of tooth = 9.5 mm (0.37 in)
Width of sprocket = 42.3 mm (1.67 in)
Max load per sprocket shown does not take bore size into account.
Please also ensure that sufficient size shaft is chosen for corresponding load.
For correct sprocket position: See uni Assembly Instructions for uni RTB.
For more detailed sprocket information, contact Customer Service.
uni RTB M2/160628
Expert advice, quality solutions Ammeraal Beltech Modular A/S
Transmission Belts
Conveyor Belts
Seamless Belts
and local service Hjulmagervej 21
Modular Belts
Timing Belts
Fabrication
for all your belting needs DK-7100 Vejle
& service
www.ammeraalbeltech.com
T +45 7572 3100
This information is subject to alteration due to continuous development. Ammeraal Beltech will not be held liable for the incorrect F +45 7572 3348
use of the above stated information. This information replaces previous information. All activities performed and services rendered by [email protected]
Ammeraal Beltech are subject to general terms and conditions of sale and delivery, as applied by its operating companies. www.unichains.com
