Scribd
Upload
62 views4 pages

ASSIGNMENT

The document contains a structural analysis assignment question regarding the design of a beam (Beam 01) and calculation of loads, moments, shear forces, and reinforcement requirements. Key details include: - Beam 01 has dimensions of 0.15m x 2.5m with a 0.3m x 0.5m slab on top, spanning 4.5m or 5.5m. - Calculations are shown for self-weight, dead, live and design loads, bending moment, shear force, concrete grade, reinforcement area and spacing requirements. - The required steel reinforcement area is calculated to be 820mm2. Shear links are also required as the shear resistance provided by the concrete is

Uploaded by

ncnc
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
62 views4 pages

ASSIGNMENT

The document contains a structural analysis assignment question regarding the design of a beam (Beam 01) and calculation of loads, moments, shear forces, and reinforcement requirements. Key details include: - Beam 01 has dimensions of 0.15m x 2.5m with a 0.3m x 0.5m slab on top, spanning 4.5m or 5.5m. - Calculations are shown for self-weight, dead, live and design loads, bending moment, shear force, concrete grade, reinforcement area and spacing requirements. - The required steel reinforcement area is calculated to be 820mm2. Shear links are also required as the shear resistance provided by the concrete is

Uploaded by

ncnc
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

BEng (Hons) in Civil and Infrastructure

Engineering
Bridging Programe -2022
Structural Analysis
Bridging Assignment

Q1)

Floor height -3.2m

a) Considering Beam 01

Self-weight = 24 kN/m3 X (0.15 X 2.5) m2 +24 kN/m3 X (0.3 X 0.5) m2 = 12.6 kN/m

Dead load = 3 kN/m2 X 2.5 m = 7.5 kN/m

Live load = 3 kN/m2 X 2.5 m = 7.5 kN/m

Design load = 1.35 (7.5+ 12.6) + 1.5 (7.5) =38.389 kN/m (UDL)

Span 4.5 m
Slab 4.5/2.5 = 1.8< 2
Design load = 38.389 X 4.5 =172.75 Kn
two-way panel

Service Load = 4.5 (7.5 +7.5+12.6) = 124.2 kN


Span 5.5 m
Slab 5.5/2.5 = 2.2 > 2

Design load = 38.389 X 5.5 =211.12 Kn One-way panel

Service Load = 5.5 (7.5 +7.5+12.6) = 151.8 kN

b) Ultimate design B. moment = wL2/ 8 = (38.389 X 5.52) / 8 = 145.158 KNm (pin-pin)


Shear force = wl / 2 = 105.57 kN

wl / 2 = 105.57 kN

wL2/ 8= 145.158

c) Assume concrete is C25 grade

K= M / (bd2fck) = (145.16 X 106) / (300 X 4492 X 25) = 0.09< 0.162 (single r/f)

Z= d [0.5 + (0.25-k/1.134)1/2]

= d [ 0.5+ (0.25-0.09/1.134)]

= 0.9d < 0.95d

= 409.97

As = M/(0.87 fyk Zbal)

= 145.16 x 106/ (0.87X 500X 0.9 X 449)

= 820 mm2

As min = 0.26 (fctm/ fcd) bd > 0.0013bt d

= 0.26 x (2.6/500) x 300 x 449 > 0.0013 x 300 x 449

= 182 > 175

= 182 mm2

Hence As req = 820 mm2

K = 1+ (200/449)1/2

= 1.57 < 2

Ƥ1 = As / (bw d) = 820/(300x449) = 6.08 x 10-3


For shear force

VRc = CRd k (100 Ƥ1 fck)1/3 bw d > Vmin bw d

= 0.12x1.67x(100x6.08x10-3x25)x300x449 > 0.035x1.671.5x250.5x300x449

= 66.87 kN > 50.87 kN

66.87 kN < Ved Hence shear links required.

105.57 kN

66.87

5.5/2

VRdmax = Ved = 105.57 kN

αcw bw zV1 fcd (sin(2θ)/2) = 105.57x103

1x300x0.9x449x0.6x(25/1.5) (sin(2θ)/2) = 105.57x103

sin(2θ) =0.17

θ = 4.890 but 220< θ<450

hence θ= 220

assume shear link diameter is 8 mm

VRd c = AswZ (fywd /s)cot(θ)

S = [ (2xπx42)x0.91x449x500xcot(220) ] / (105.57x103x 1.15)

= 418 mm

Smax = 0.95d (1+cot(α))

= 0.95x 449x (1+cot(900))

= 325 mm

So S =325 mm
d)

You might also like