Scribd
Upload
68 views4 pages

Structure 11

The document is an output file from STAAD.Pro, a structural analysis and design software. It summarizes the analysis of a structure with 7 joints and 6 members. The structure was defined, materials were specified, loads were applied, and the analysis was performed and checked against design codes. The output shows the structure passed all checks under the specified loading conditions.

Uploaded by

sam_antony2005
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
68 views4 pages

Structure 11

The document is an output file from STAAD.Pro, a structural analysis and design software. It summarizes the analysis of a structure with 7 joints and 6 members. The structure was defined, materials were specified, loads were applied, and the analysis was performed and checked against design codes. The output shows the structure passed all checks under the specified loading conditions.

Uploaded by

sam_antony2005
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Monday, February 17, 2020, 03:12 PM

PAGE NO. 1

****************************************************
* *
* STAAD.Pro V8i SELECTseries4 *
* Version 20.07.09.31 *
* Proprietary Program of *
* Bentley Systems, Inc. *
* Date= FEB 17, 2020 *
* Time= 15: 7:13 *
* *
* USER ID: *
****************************************************

1. STAAD SPACE
INPUT FILE: Structure1.STD
2. START JOB INFORMATION
3. ENGINEER DATE 17-FEB-20
4. END JOB INFORMATION
5. INPUT WIDTH 79
6. UNIT METER KN
7. JOINT COORDINATES
8. 1 0 0 0; 2 2 0 0; 5 2.25 0 2; 6 -0.25 0 2; 7 1.7 0 0; 8 1.95 0 2
9. 9 1.825 0 1
10. MEMBER INCIDENCES
11. 1 1 7; 2 8 6; 3 5 8; 5 7 2; 7 7 9; 8 9 8
12. DEFINE MATERIAL START
13. ISOTROPIC STEEL
14. E 2.05E+008
15. POISSON 0.3
16. DENSITY 76.8195
17. ALPHA 1.2E-005
18. DAMP 0.03
19. TYPE STEEL
20. STRENGTH FY 253200 FU 407800 RY 1.5 RT 1.2
21. END DEFINE MATERIAL
22. MEMBER PROPERTY EUROPEAN
23. 1 TO 3 5 7 8 TABLE ST IPE140
24. CONSTANTS
25. MATERIAL STEEL ALL
26. SUPPORTS
27. 1 2 5 6 PINNED
28. LOAD 1 LOADTYPE NONE TITLE LOAD CASE 1
29. SELFWEIGHT Y -1.1 LIST ALL
30. JOINT LOAD
31. 7 TO 9 FY -1.
32. LOAD 2 LOADTYPE NONE TITLE LOAD CASE 2
33. JOINT LOAD
34. 7 TO 9 FY -3
35. LOAD COMB 100 1.4DL
36. 1 1.4
37. LOAD COMB 101 1.4DL+1.6LL
38. 1 1.4 2 1.6

C:\SProV8i\STAAD\Plugins\Structure1.anl Page 1 of 4
Monday, February 17, 2020, 03:12 PM
STAAD SPACE -- PAGE NO. 2

39. LOAD COMB 200 DL+LL


40. 1 1.0 2 1.0
41. PERFORM ANALYSIS

P R O B L E M S T A T I S T I C S
-----------------------------------

NUMBER OF JOINTS 7 NUMBER OF MEMBERS 6


NUMBER OF PLATES 0 NUMBER OF SOLIDS 0
NUMBER OF SURFACES 0 NUMBER OF SUPPORTS 4

SOLVER USED IS THE IN-CORE ADVANCED SOLVER

TOTAL PRIMARY LOAD CASES = 2, TOTAL DEGREES OF FREEDOM = 30

42. PARAMETER 1
43. CODE BS5950
44. PY 275000 ALL
45. MAIN 2 ALL
46. CHECK CODE ALL

STAAD.Pro CODE CHECKING - (BSI )


***********************

PROGRAM CODE REVISION V2.13_5950-1_2000

C:\SProV8i\STAAD\Plugins\Structure1.anl Page 2 of 4
Monday, February 17, 2020, 03:12 PM
STAAD SPACE -- PAGE NO. 3

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/


FX MY MZ LOCATION
=======================================================================

1 ST IPE140 PASS BS-4.3.6 0.154 101


0.00 0.00 2.47 0.00
2 ST IPE140 PASS BS-4.3.6 0.193 101
0.00 0.00 2.57 0.00
3 ST IPE140 PASS BS-4.3.6 0.106 101
0.00 0.00 2.57 0.00
5 ST IPE140 PASS BS-4.3.6 0.102 101
0.00 0.00 2.47 0.00
7 ST IPE140 PASS BS-4.3.6 0.151 101
0.00 0.00 3.22 0.00
8 ST IPE140 PASS BS-4.3.6 0.151 101
0.00 0.00 3.22 0.00

************** END OF TABULATED RESULT OF DESIGN **************

47. FINISH

*********** END OF THE STAAD.Pro RUN ***********

**** DATE= FEB 17,2020 TIME= 15: 7:16 ****

C:\SProV8i\STAAD\Plugins\Structure1.anl Page 3 of 4
Monday, February 17, 2020, 03:12 PM
STAAD SPACE -- PAGE NO. 4

************************************************************
* For questions on STAAD.Pro, please contact *
* Bentley Systems or Partner offices *
* *
* Telephone Web / Email *
* USA +1 (714) 974-2500 *
* UK +44 (0) 808 101 9246 *
* SINGAPORE +65 6225-6158 *
* FRANCE +33 (0) 1 55238400 *
* GERMANY +49 0931 40468 *
* INDIA +91 (033) 4006-2021 *
* JAPAN +81 (03)5952-6500 http://www.ctc-g.co.jp *
* CHINA +86 21 6288 4040 *
* THAILAND +66 (0)2645-1018/19 [email protected]*
* *
* Worldwide http://selectservices.bentley.com/en-US/ *
* *
************************************************************

C:\SProV8i\STAAD\Plugins\Structure1.anl Page 4 of 4

You might also like