SUBMIT PCR

G550

WORK ORDER:
REGISTRATION SERIAL NO. TITLE
Airframe - COPILOT COCKPIT CLOCK -
VP-CAE 5051 312002
REMOVAL / INSTALLATION
AIRFRAME HOURS AIRFRAME CYCLES
OPERATOR
4679 1611
TAG AVIATION ASIA LTD.
FREQUENCY: O/C
PARENT CODE / OPERATION
ACCOMPLISHED: 1335.3Hrs, 535Afl, 10-Oct-2008

NEXT DUE:

REMAINS:

REQUIREMENTS REFERENCE TASK TYPE

Component (PN)

PROCEDURE REFERENCE REGULATION

AMM 31-22-01 REV 28 NOV 15/17 CYM-CAACI

NOTE: SERVICE CODES ARE COLLECTED AND ANALYZED BY THE MANUFACTURER TO IMPROVE THE MAINTENANCE PROGRAM AND TO INCREASE THE RELIABILITY OF THE AIRCRAFT. IT IS
IMPORTANT THAT TECHNICIANS PROVIDE ACCURATE SERVICE CODES AND INSPECTION FINDINGS WHEN COMPLETING A MAINTENANCE WORK CARD.
Submit Cards to the CMP Group by emailing them to [email protected] or by using the MyCMP Document Upload feature on mygulfstream.com. Documents must be scanned .pdf

FACILITY:
files. Cards can also be faxed to 912-963-0265 or Toll Free 1-800-944-1775.
PART REMOVAL CODES MALFUNCTION CODE - USE WITH 'B' REMOVAL CODE ONLY INSTALLED PART STATUS
A. TIME CHANGE K. SERVICING 01. ADJ OR ALIGN IMPROP 08. CORRODED 15. FLUCTUATES/ERRATICALLY N. NEW M. MODIFIED
B. PREMATURE FAILURE L. LNR ENG RMVD 02. BEARING FAULTY/WORN 09. DELAMINATED 16. INTERMITTENT O. OVERHAULED I. INSPECTED
C. RESULT OF E/C M. TIRE CHANGE 03. BENT, DENT OR CRACKED 10. DOES NOT MEET SPECS 17. LEAKING R. REPAIRED T. TESTED
D. WORN S. SWAP/TRBLSHT 04. BINDING OR STUCK 11. EXCESSIVE VIBRATION 18. LOOSE S. SERVICABLE
E. MAINT CONV U. UNKNOWN 05. BROKEN 12. FAILED/DAMAGED (RESULT OF OTHER MALF) 19. COSMETIC DAMAGE X. OTHER-SEE 8130-3(BLK12)
F. MOD/UPGRADE V. FOUND OK 06. BURNED/OVERHEAT 13. FAILURE TO OPERATE 20. WORN/CHAFED/FRAYED TC. TIME CONT.
H. DAMAGED 07. CONTAMINATED/DIRTY 14. FAILED DIAG/AUTOMATIC/BITE TEST

RMVL CODE MAL CODE

PART NUMBER OFF 1159SCAV409-2 INSTALLED
PART DETAILS
HOURS CYCLES DATE

SERIAL NUMBER OFF 0620 TSN

INSTL STATUS INSTL TIMES

PART NUMBER ON TSO

SERIAL NUMBER ON TSR

USE TABLE

MAINT TAG: 3 MOD STATUS:

4 H/W VERSION: ddddfdddds
S/W VERSION: WARRANTY:

MANUFACTURER: VENDOR: MAT'L COST: LABOR HRS:

CERTIFICATE:
COMPLIANCE REMARKS

MAINTENANCE NOTES

RTS STATEMENT

TECHNICIAN SIGNATURE CERTIFICATE# COMPLIANCE DATE

INSPECTED BY CERTIFICATE# DATE

WID: 63571519-1 Page 1 of 1

 SUBMIT PCR

G550

WORK ORDER:
REGISTRATION SERIAL NO. TITLE
Airframe - COCKPIT CLOCKS -
VP-CAE 5051
FUNCTIONAL TEST 312200
AIRFRAME HOURS AIRFRAME CYCLES
OPERATOR
4679 1611
TAG AVIATION ASIA LTD.
FREQUENCY: O/C
PARENT CODE / OPERATION
ACCOMPLISHED: 4601Hrs, 1583Afl, 13-Jul-2021

NEXT DUE:

REMAINS:

REQUIREMENTS REFERENCE TASK TYPE

Scheduled Maintenance Check (SMC)

PROCEDURE REFERENCE REGULATION

AMM 31-22-01 REV 18 MAR 31/11 CYM-CAACI

NOTE: SERVICE CODES ARE COLLECTED AND ANALYZED BY THE MANUFACTURER TO IMPROVE THE MAINTENANCE PROGRAM AND TO INCREASE THE RELIABILITY OF THE AIRCRAFT. IT IS
IMPORTANT THAT TECHNICIANS PROVIDE ACCURATE SERVICE CODES AND INSPECTION FINDINGS WHEN COMPLETING A MAINTENANCE WORK CARD.
Submit Cards to the CMP Group by emailing them to [email protected] or by using the MyCMP Document Upload feature on mygulfstream.com. Documents must be scanned .pdf

FACILITY:
files. Cards can also be faxed to 912-963-0265 or Toll Free 1-800-944-1775.
COMP CHG / OPS CHK OK AS IS REQUIRED SERVICE/ADJ
PART NUMBER: SERIAL NUMBER:
S V W
MARK AS APPLICABLE MARK AS APPLICABLE MARK AS APPLICABLE MATERIAL COST: LABOR HOURS:

COMPLIANCE REMARKS

MAINTENANCE NOTES

CERTIFICATE:

RTS STATEMENT

TECHNICIAN SIGNATURE CERTIFICATE# COMPLIANCE DATE

INSPECTED BY CERTIFICATE# DATE

WID: 63571519-2 Page 1 of 1

 SUBMIT PCR

G550

WORK ORDER:
REGISTRATION SERIAL NO. TITLE
Airframe - COCKPIT CLOCK BATTERY
VP-CAE 5051 312004
(COPILOT) - REMOVAL / INSTALLATION
AIRFRAME HOURS AIRFRAME CYCLES
OPERATOR
4679 1611
TAG AVIATION ASIA LTD.
FREQUENCY: O/C
PARENT CODE / OPERATION
ACCOMPLISHED: 4601Hrs, 1583Afl, 13-Jul-2021

NEXT DUE:

REMAINS:

REQUIREMENTS REFERENCE TASK TYPE

Component (PN)

PROCEDURE REFERENCE REGULATION

AMM 31-22-03 REV 34 MAR 15/21 CYM-CAACI

NOTE: SERVICE CODES ARE COLLECTED AND ANALYZED BY THE MANUFACTURER TO IMPROVE THE MAINTENANCE PROGRAM AND TO INCREASE THE RELIABILITY OF THE AIRCRAFT. IT IS
IMPORTANT THAT TECHNICIANS PROVIDE ACCURATE SERVICE CODES AND INSPECTION FINDINGS WHEN COMPLETING A MAINTENANCE WORK CARD.
Submit Cards to the CMP Group by emailing them to [email protected] or by using the MyCMP Document Upload feature on mygulfstream.com. Documents must be scanned .pdf

FACILITY:
files. Cards can also be faxed to 912-963-0265 or Toll Free 1-800-944-1775.
PART REMOVAL CODES MALFUNCTION CODE - USE WITH 'B' REMOVAL CODE ONLY INSTALLED PART STATUS
A. TIME CHANGE K. SERVICING 01. ADJ OR ALIGN IMPROP 08. CORRODED 15. FLUCTUATES/ERRATICALLY N. NEW M. MODIFIED
B. PREMATURE FAILURE L. LNR ENG RMVD 02. BEARING FAULTY/WORN 09. DELAMINATED 16. INTERMITTENT O. OVERHAULED I. INSPECTED
C. RESULT OF E/C M. TIRE CHANGE 03. BENT, DENT OR CRACKED 10. DOES NOT MEET SPECS 17. LEAKING R. REPAIRED T. TESTED
D. WORN S. SWAP/TRBLSHT 04. BINDING OR STUCK 11. EXCESSIVE VIBRATION 18. LOOSE S. SERVICABLE
E. MAINT CONV U. UNKNOWN 05. BROKEN 12. FAILED/DAMAGED (RESULT OF OTHER MALF) 19. COSMETIC DAMAGE X. OTHER-SEE 8130-3(BLK12)
F. MOD/UPGRADE V. FOUND OK 06. BURNED/OVERHEAT 13. FAILURE TO OPERATE 20. WORN/CHAFED/FRAYED TC. TIME CONT.
H. DAMAGED 07. CONTAMINATED/DIRTY 14. FAILED DIAG/AUTOMATIC/BITE TEST

RMVL CODE MAL CODE

PART NUMBER OFF MN9100 INSTALLED
PART DETAILS
HOURS CYCLES DATE

SERIAL NUMBER OFF N/A TSN

INSTL STATUS INSTL TIMES

PART NUMBER ON TSO

SERIAL NUMBER ON TSR

USE TABLE

MAINT TAG: 3 MOD STATUS:

4 H/W VERSION: ddddfdddds
S/W VERSION: WARRANTY:

MANUFACTURER: VENDOR: MAT'L COST: LABOR HRS:

CERTIFICATE:
COMPLIANCE REMARKS
NOTE: ALT P/N MN9100 // DAVTRON MODEL 811B ICA REQUIRES BATTERY EXCHANGE ON A MINIMUM OF TWO YEARS //

MAINTENANCE NOTES

RTS STATEMENT

TECHNICIAN SIGNATURE CERTIFICATE# COMPLIANCE DATE

INSPECTED BY CERTIFICATE# DATE

WID: 63571519-3 Page 1 of 1

 SUBMIT PCR

G550

WORK ORDER:
REGISTRATION SERIAL NO. TITLE
Airframe - COCKPIT CLOCKS -
VP-CAE 5051
FUNCTIONAL TEST 312200
AIRFRAME HOURS AIRFRAME CYCLES
OPERATOR
4679 1611
TAG AVIATION ASIA LTD.
FREQUENCY: O/C
PARENT CODE / OPERATION
ACCOMPLISHED: 4601Hrs, 1583Afl, 13-Jul-2021

NEXT DUE:

REMAINS:

REQUIREMENTS REFERENCE TASK TYPE

Scheduled Maintenance Check (SMC)

PROCEDURE REFERENCE REGULATION

AMM 31-22-01 REV 18 MAR 31/11 CYM-CAACI

NOTE: SERVICE CODES ARE COLLECTED AND ANALYZED BY THE MANUFACTURER TO IMPROVE THE MAINTENANCE PROGRAM AND TO INCREASE THE RELIABILITY OF THE AIRCRAFT. IT IS
IMPORTANT THAT TECHNICIANS PROVIDE ACCURATE SERVICE CODES AND INSPECTION FINDINGS WHEN COMPLETING A MAINTENANCE WORK CARD.
Submit Cards to the CMP Group by emailing them to [email protected] or by using the MyCMP Document Upload feature on mygulfstream.com. Documents must be scanned .pdf

FACILITY:
files. Cards can also be faxed to 912-963-0265 or Toll Free 1-800-944-1775.
COMP CHG / OPS CHK OK AS IS REQUIRED SERVICE/ADJ
PART NUMBER: SERIAL NUMBER:
S V W
MARK AS APPLICABLE MARK AS APPLICABLE MARK AS APPLICABLE MATERIAL COST: LABOR HOURS:

COMPLIANCE REMARKS

MAINTENANCE NOTES

CERTIFICATE:

RTS STATEMENT

TECHNICIAN SIGNATURE CERTIFICATE# COMPLIANCE DATE

INSPECTED BY CERTIFICATE# DATE

WID: 63571519-4 Page 1 of 1