FIRE AND GAS

DETECTION SYSTEMS.
Discover the Dräger Houston System Center (HSC)
2| DRÄGER HOUSTON SYSTEM CENTER

Gather data &

design a plan

Consultation
SITE ASSESSMENTS AND HAZARD IDENTIFICATION SYSTEM INTEGRATION AND COMMUNICATION
As your trusted advisor in process safety and fire and gas system The smooth integration of new sub-systems into a plant’s overall
design, our team of engineers and technical experts can assist enterprise automation architecture is key to the success of any
you at the earliest phases of your project. The team starts with major project. Notification and control action signals must pass
a detailed process and site assessment to understand the cleanly and quickly from each of the individually designed and
operations performed at your facility. Referencing industry best application-specific systems used in the various process areas
practices, state and federal regulatory codes, up-to-date, peer- and buildings in your facility.
reviewed industry standards and technical reports, respected
industry leaders’ corporate guidelines, and our own experience Dräger’s System Center engineers employ the flexible
and access to technical experts around the world, we help identify
communications capabilities of the REGARD® 7000 series,
the potential hazards to personnel and property and the various
such as MODBUS, TCP/IP ethernet and others, as well as all
risk scenarios and possible consequences of dangerous events.
the available interface options for our detection devices,
Next, we identify “best match” detection technologies to the
including HART and MODBUS, to meet the needs of your
identified hazards, and provide recommended notification and
enterprise control and data management systems. In addition,
response strategies from a wide variety of available technologies
and products. Finally, using a fully interactive approach, the team the system integration designer works to provide the most
designs a system that achieves your facility’s safety goals, while economic design possible.
paying close attention to your initial investment value and long-term
operational expenditures. The flexible configurations of the REGARD® 7000 series allow
for multiple remote I/O stations that can significantly lower the
cost for both signal communications and power. Dräger’s
SAFETY SYSTEM DESIGN AND OPTIMIZATION
Two major challenges Dräger can help you address are complexity system integration capability also includes customized and
and system optimization. Drawing from years of experience, our standard configurations of HMI (human machine interface)
technical experts use prescriptive- and performance-based design software for visualization, configuration and application-specific
concepts to create safety systems that meet or exceed your control actions.
facility’s safety standards. Using innovative fire and gas mapping
software, we are able to optimize and validate system designs.
 DRÄGER HOUSTON SYSTEM CENTER |3

Make the design

a reality

Implementation
PROJECT MANAGEMENT STARTUP AND COMMISSIONING
To keep your project on schedule, Dräger has dedicated and certified Once factory acceptance testing of your system is complete at our
project managers that oversee the progress of your project from Houston location, certified Dräger field service engineers provide
start to finish. By maintaining frequent and ongoing communication local startup and commissioning assistance. The design engineers
between our internal teams and your team, our project manager helps and project manager that supported you from the start continue to
ensure the success of every project, regardless of its complexity. oversee the commissioning effort, remaining available to you and the
field engineers to provide support throughout the commissioning
DOCUMENTATION and startup process. Our goal is to install your new system with
To support the successful implementation of your project, our minimal disruption to your production, while meeting the agreed-
team can provide accurate and complete documentation packages upon project completion date.
as per a standard set of Dräger drawings and product information
documents or pre-defined list of custom requirements. Where
required, specially certified and trained engineers provide a level
above most other integration teams by producing documentation
packages that include placement optimization reports via fire
and gas mapping studies, NFPA 72v2019 Section 7 forms, and
performance design summaries for presentation to fire officials
and any additional authorities having jurisdiction over your project.

SYSTEM VALIDATION AND FACTORY ACCEPTANCE TESTING

Our production engineering group builds and tests all systems
in our ISO 9001 and certified UL508A Houston System Center.
You will be able to tour the Center, meet your project manager
and design engineers, review our quality program and standards,
and perform and witness factory acceptance tests and a variety
of additional activities at the Center before we deliver your new
system to your site for startup and commissioning.
4| DRÄGER HOUSTON SYSTEM CENTER

Maximize
your investment

Optimization
TECHNICAL SUPPORT
To keep things running smoothly once your new system is installed
and operational, our team of technical support professionals and
engineers are available to answer questions and troubleshoot any
issues that may arise in the future.

ONGOING SERVICE AND MAINTENANCE

All work on your equipment – calibration, repair, overhaul, or
warranty work – is handled at the Houston System Center
by skilled Dräger professionals. Our Sensor and Transmitter
Exchange Program ensures quick turnaround for maximum
uptime at your facility. If you have questions, call us at
1-800-4DRAGER to be connected to our service experts.

CUSTOMIZED TRAINING
To maximize your investment in safety, training is essential. Our
training team can provide the consistent professional training you
need – either at our center in Houston or at your plant. We can
tailor topics to meet your needs – from the basics of fire and
gas detection to detailed user information for specific devices
and controllers.

We hold training courses every six months at our Houston System

Center. For the schedule, check our website. To register for
training at Houston or arrange for classes at your facility, call
1-800-4DRAGER to be connected to our Technical Service team.
 DRÄGER HOUSTON SYSTEM CENTER |5

Dräger Integrated System - REGARD® 7000 Controller

REGARD® 7000

DCS/Control Room

Dräger Polysoft
diagnostic software

REGARD® Controller
Wireless
LEL & toxic gas detector

4-20mA HART
Polytron® 8100 Polytron® 8700
O2 & toxic gas detector LEL detector

Audible visible Pulsar 7000 PointGard Flame 5000

alarm devices open path detector self-contained visual flame detector
LEL & toxic gas detector

Polytron® 7000 Flame detector METCAM

toxic gas detector methane detector
 6| DRÄGER HOUSTON SYSTEM CENTER

Dräger Integrated System - REGARD® 7000-F Controller

ModBus TCP/IP

Control Room Suppression System

REGARD® 7000
dashboard

Remote panel
REGARD® 7000

Addressable
Loop (Zone 1)

Addressable
Pulsar 7000 Polytron® 8100 Audible visual Polytron® 8200
module
open path detector O2 & Toxic alarm device LEL detector
Gas detector

Addressable
Loop (Zone 2)

Flame 5000 Polytron® 8700 Flame detector

visual flame detector LEL detector Addressable
module
“Everything we do,
we do with passion –
and we do it for life.”
Stefan Dräger
Not all products, features, or services are for sale in all countries.
Mentioned Trademarks are only registered in certain countries and not necessarily in the country
in which this material is released. Go to www.draeger.com/trademarks to find the current status.

CORPORATE HEADQUARTERS
Drägerwerk AG & Co. KGaA
Moislinger Allee 53–55
23558 Lübeck, Germany

www.draeger.com

91 08 242 | 20.11-1 | YY | Subject to modifications | © 2020 Drägerwerk AG & Co. KGaA

USA
Draeger, Inc.
7256 S. Sam Houston Parkway W.,
Locate your Regional Sales Suite 100
Representative at: Houston, TX 77085
www.draeger.com/contact 1 800 4DRAGER
(1 800 437 2437)