Scribd Logo
Upload

Welcome to Scribd!

  • 822 views

    NEC Table 430.32-Overload

    Uploaded by

    Jo Jordan
    This document from NEC Table 430.32(A)(1) outlines requirements for separate overload devices for continuous-duty motors. It states that a separate overload device responsive to motor current is required and must be selected to trip or rated at no more than 125% of nameplate current for motors with a service factor of 1.15 or greater or temperature rise of 40°C or less, and no more than 115% for all other motors.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    NEC Table 430.32-Overload

    Uploaded by

    Jo Jordan
    822 views1 page
    This document from NEC Table 430.32(A)(1) outlines requirements for separate overload devices for continuous-duty motors. It states that a separate overload device responsive to motor current is required and must be selected to trip or rated at no more than 125% of nameplate current for motors with a service factor of 1.15 or greater or temperature rise of 40°C or less, and no more than 115% for all other motors.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document from NEC Table 430.32(A)(1) outlines requirements for separate overload devices for continuous-duty motors. It states that a separate overload device responsive to motor current is required and must be selected to trip or rated at no more than 125% of nameplate current for motors with a service factor of 1.15 or greater or temperature rise of 40°C or less, and no more than 115% for all other motors.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    822 views1 page

    NEC Table 430.32-Overload

    Uploaded by

    Jo Jordan
    This document from NEC Table 430.32(A)(1) outlines requirements for separate overload devices for continuous-duty motors. It states that a separate overload device responsive to motor current is required and must be selected to trip or rated at no more than 125% of nameplate current for motors with a service factor of 1.15 or greater or temperature rise of 40°C or less, and no more than 115% for all other motors.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    NEC Table 430.

    32(A)(1)
    Separate Overload Device for Continuous-Duty Motors
    A separate overload device that is responsive to motor current. This device shall be
    selected to trip or shall be rated at no more than the following percent of the motor
    nameplate full-load current rating:
     Motors with a marked service factor (SF) 1.15 or greater 125%
     o
    Motors with a marked temperature rise 40 C or less 125%
     All other motors 115%

    You might also like