Scribd
Upload
290 views

Structured Cabling Schematicc

Category 5E unshielded twisted pair (UTP) cable is used to connect devices like computers, printers, IP phones, and network switches in both the main computer room and offices. Patch panels in the computer room organize connections from UTP cable run through the building to patch leads running to individual devices. Voice connections from the public switched telephone network can also be patched to a separate voice patch panel to connect up to 24 phones.

Uploaded by

Rachamalla Siva Swarup Reddy
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
290 views

Structured Cabling Schematicc

Category 5E unshielded twisted pair (UTP) cable is used to connect devices like computers, printers, IP phones, and network switches in both the main computer room and offices. Patch panels in the computer room organize connections from UTP cable run through the building to patch leads running to individual devices. Voice connections from the public switched telephone network can also be patched to a separate voice patch panel to connect up to 24 phones.

Uploaded by

Rachamalla Siva Swarup Reddy
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Structured Cabling Schematic

A Stranded and Solid Core Category 5E UTP Cable Cross-section The following pages are examples of product applications within LAN/WAN network schematics.

Structured Cabling and UTP - Unshielded Twisted Pair


Main Computer Room
UTP Cat 5E

Category 5E Patch Panel

A patch cable is used to connect comms equipment to P.Cs Printers Etc. The length of which can vary between 1 and 5 metres and is sold in a variety of different colours for identification purposes. UTP Patch Lead UTP Patch Lead

Network Switches

Voice Patch Panel

UTP - Unshielded twisted pair solid core cable is made up of 4 pairs and can be used to connect a port on the patch panel to a UTP - RJ45 module at the other end. If you have a 24 port UTP patch panel you can have up to 24 modules in different locations up to a maximum of 90 metres away from the network cabinet.

CW1308

PSTN/PABX
A voice patch panel is connected to the PSTN (public switched telephone network) exchange, using a multi-core CW1308 telephone cable - up to 24 phones can be connected to a 24 port voice patch panel.

UTP Outlets Located in Office


UTP Outlet UTP RJ45 Category 5E Module UTP Patch Lead Office PC

Networked Printer & Photocopier UTP Patch Lead UTP Patch Lead

Network I.P Telephone

You might also like