Cotton Varieties Hybrids
Cotton Varieties Hybrids
Cotton Varieties Hybrids
INTRODUCTION
Cotton is a fibre, oil and protein yielding crop of global significance. It is cultivated in tropical and sub-
tropical regions of more than 80 countries of the world. The major cotton producing countries are USA,
China, India, Pakistan, Uzbekistan, Turkey, Brazil, Greece, Argentina and Egypt. These countries
contribute about 85% to the global cotton production. India stands first in area, third in production and last
in productivity among these countries.
In India, there are nine major cotton growing states which are divided into three zones, viz. north zone,
central zone and south zone. North zone consists of Punjab, Haryana, Rajasthan and Western Uttar
Pradesh. Central zone includes Madhya Pradesh, Maharashtra and Gujarat. South zone comprises
Andhra Pradesh, Karnataka and Tamil Nadu. These states cover about 95% of cotton area and also
contribute about 95% to the total cotton production in India. Three cotton growing zones differ from each
other in several aspects such as soil type and topography, irrigation facilities, species cultivated,
productivity level etc. (Table-1). Besides these states, cotton is also grown on small areas in Bihar,
Orissia, Assam, Tripura and Meghalaya. These states cover about 5% area and also contribute 5% to the
national cotton production.
CULTIVATED SPECIES
There are four cultivated species of cotton viz. Gossypium arboreum, G.herbaceum, G.hirsutum and
G.barbadense. The first two species are diploid (2n=26) and are native to old world. They are also known
as Asiatic cottons because they are grown in Asia. The last two species are tetraploid (2n=52) and are
also referred to as New World Cottons. G.hirsutum is also known as American cotton or upland cotton
and G.barbadense as Egyptian cotton or Sea Island cotton or Peruvian Cotton or Tanguish Cotton or
quality cotton.G.hirsutum is the predominant species which alone contributes about 90% to the global
production. In USA and Uzbekistan, more than 90% area is covered by G.hirsutum. Perhaps, India is the
only country in the world where all the four cultivated species are grown on commercial scale. In India,
45%, 30% and 24.7% area is covered by hybrids, upland cotton and diploid species respectively.
G.barbadense is grown on a very little area (0.3%) in the state of Tamil Nadu and Andhra Pradesh.
G.herbaceum is limited to the states of Gujarat and Karnataka. G.hirsutum and G.arboreum are grown in
all the major cotton growing states in India. Distinguishing morphological features of all the four cultivated
species of cotton are given in Table-2.
Gossypium arboretum
Bracts are more or less triangular and closely invest bud and flower. Bracts have 4-5 teeth at the
apex. Bolls are tapering and profusely pitted with prominent oil glands. Bolls open widely on maturity. This
species is also known as Indian cotton.
Gossypium herbaceum
Bracts flare widely from the bud, flower and boll. They have 6-8 teeth. Bolls are round and rarely
with prominent shoulders. Bolls are smooth or with few shallow pits and few oil glands. Bolls open slightly
when ripe.
Gossypium hirsutum
Flowers do not have red spot at the base of petal. The staminal column is short. The anthers are
loosely arranged on the staminal column. Anther filaments are larger in the upper region than in the lower
region. The capsule surface is usually smooth.
Gossypium barbadense
Bracts are very large which cover the flower bud completely. The staminal column is long on
which anthers are compactly arranged. The anther filament is of same length. Bolls are large and deeply
pitted with black oil glands. Red spot is present at the base of petal.
Bracts are united at the base in diploid cottons and free in tetraploid cottons. Diploid cottons have
high degree of resistance to biotic and abiotic stresses, whereas tetraploid cottons have high yielding
capacity and good fibre quality.
COTTON VARIETIES
The varietal improvement work in cotton started as early as in 1904 when Agricultural
Departments were established in various states. It was further strengthened in 1923 when Indian Central
Cotton Committee (ICCC) was constituted. The varietal improvement work got momentum with the
inception of All India Coordinated Cotton Improvement Project (AICCIP) in April, 1967. After inception of
AICCIP, 90 varieties of upland cotton, 3 of Egyptian cotton, 39 of diploid cottons and 43 hybrids have
been released for commercial cultivation in different states of India. A brief account of cotton varieties
released from different states is presented below:
North zone consists of Punjab, Haryana, Rajasthan and Western U.P. In Punjab, varietal
improvement work is carried out at Ludhiana and Faridkot. Ludhiana is the main centre and Faridkot is
the sub-centre. In Punjab, 18 varieties of upland cotton and six of arboreum cotton have been released so
far. The currently cultivated varieties include LH 900, LH 1556, F846 and F 1378 in G.hirsutum and G.27,
LD 327 and LD 491 in G.arboreum (Table 3 and 4).
In Haryana, cotton improvement work is carried out at Hisar. From Hisar, 8 varieties of
G.hirsutum and 5 of G.arboreum have been released so far. However, four varieties of former species
(HS 6, H 974, H 1098 and HS 182) and three of latter (DS 5, HD 107 and HD 123) are presently under
cultivation.
In Rajasthan, cotton breeding work is done at Sriganganagar and Banswara. The former is the
main research centre and the latter is sub-centre. In Rajasthan, six varieties of G.hirsutum and two of
G.arboreum have been released for commercial cultivation so far. The presently cultivated varieties
include RST 9, Ganganagar Ageti and RS 875 in G.hirsutum and RG 8 in G.arboreum.
In Uttar Pradesh, cotton is cultivated in western part on few thousand hectares. Presently, the
breeding work is carried out at Kanpur. The currently cultivated varieties include Vikas (upland) and Lohit
(arboreum).
Central Zone includes Madhya Pradesh, Maharashtra and Gujarat. In M.P., 8 varieties of
G.hirsutum and 4 of G.arboreum have been released so far. Three varieties of former (Khandwa 2,
Khandwa 3 and Vikram) and two of latter (Maljari and Jawahar Tapti) are currently under cultivation. In
M.P., cotton breeding work is carried out at Khandwa and Indore. Khandwa is the main research centre
and Indore is sub-centre.
In Maharashtra, varietal improvement of cotton is carried out at Akola, Nanded, Rahuri and
Jalgaon. The first three are main centres and the last one is the sub-centre. In Maharashtra, 14 varieties
of G.hirsutum and 20 of G.arboreum have been released for commercial cultivation so far. The currently
cultivated varieties include DHY 286, Purnima, AKH 081 and Rajat in G.hirsutum and AKH 4, AKH 5, AKA
8401, Y1 and PA 183 in G.arboreum.
In Gujarat, cotton breeding work is carried out at Surat, Talod, Bharuch, Charodi and Junagarh.
Surat is the main research centre and rest are sub-centres. In Gujarat, G.herbaceum is also cultivated
besides G.hirsutum and G.arboreum. In this state, 7 varieties of G.hirsutum, 4 of G.arboreum and 11 of
G.herbaceum have been released so far. However, two varieties of G.hirsutum (G.Cot 12 and G.Cot 16),
three of G.arboreum (Sanjay, G.Cot 15 and G.Cot 19) and three of G.herbaceum (G.Cot 13, G.Cot 17
and G.Cot 19) are currently under cultivation.
South Zone consists of Andhra Pradesh, Karnataka and Tamil Nadu. In A.P., cotton breeding
work is carried out at Guntur and Nandyal. The former is the main centre. In A.P., 12 varieties of
G.hirsutum and 8 of G.arboreum have been released for commercial cultivation so far. The currently
cultivated varieties include Kanchana, LK 861, L 389, L 603 and L 604 in G.hirsutum and Srisailam,
Mahanandi and NA 1325 in G.arboreum.
In Karnataka, cotton improvement work is carried out at Dharwad, Arbhavi and Siruguppa.
Dharwad is the main research centre and rest are sub-centres. In Karnataka, 10 varieties of G.hirsutum
and 7 of G.herbaceum have been released so far. Varieties which are presently under cultivation sharda,
Abadhita and Sahana in G. hirsutum and DB 3-12 and Raichur 15 in G.herbaceum.
In Tamil Nadu, cotton breeding work is carried out a Coimbatore, Kovilpatti and Srivilliputhur.
Coimbatore is the main centre and others are sub-centres. In Tamil Nadu, 25 varieties of G.hirsutum, 3 of
G.barbadense and 7 of G.arboreum have been released so far. However, 5 varieties of G.hirsutum (MCU
7, LRA 5166, MCU 5 VT, SVPR 2 and Surabhi), 2 of G.arboreum (K10 and K 11) and one of G.
barbadense (Suvin) are currently under cultivation.
COTTON HYBRIDS
In India, hybrid cotton era started since 1970 with the release of world’s first cotton hybrid “H 4”
from Cotton Research Station Surat of Gujarat Agricultural University. This hybrid was developed by Late
Dr.C.T.Patel who is rightly called as father of hybrid cotton. This hybrid, by virtue of its high yield potential
and wide adaptability, became very much popular among the farmers wide adaptability, became very
much popular among the farmers initially in the Gujarat state and lateron in other adjacent states such as
Andhra Pradesh, Karnataka, Maharashtra and Madhya Pradesh. Two years after the release of H 4, the
world’s first interspecific hybrid between G.hirsutum and G.barbadense was released from the cotton
Research Sciences, Bangalore under the name “Varalaxmi”. Initially, Varalaxmi was released for
cultivation in Karnataka state, but later on spread to other states such as Tamil Nadu, Andhra Pradesh
and Maharashtra under irrigated areas. With the success of these two hybrids, heterosis breeding got
momentum in the country and several hybrids in tetraploid cottons and few in diploid cottons were
released for commercial cultivation. Now hybrids have been released for commercial cultivation in all the
major cotton growing states.
Though the work for developing commercial hybrids especially in tetraploid cotton was initiated
around 1930 at cotton Research Station, Surat, but the dream could be fulfilled after a gap of 40 years in
1970. The hybrids cotton era is divided into two parts, viz. (1) conventional hybrid era, and (2) male
sterility based hybrid era. In the beginning, all the cotton hybrids were developed by conventional method
i.e., by hand emasculation and pollination. However, the seed of conventional hybrids is very expensive
as several labourers are engaged for emasculation.
With a view to reduce the cost of hybrid seed, efforts were made to develop hybrids using genetic
male sterile or cytoplasmic male sterile lines. The first genetic male sterility (GMS) based hybrid was
released in 1978 from Central Institute for Cotton Research, Regional Station, Coimbatore in the name of
the “Suguna” in upland cotton for Tamil Nadu state. However, this hybrid could not become popular in the
state of Tamil Nadu, mainly due to poor yield than conventional hybrids. Efforts were also made to
develop cytoplasmic genic male sterility (CGMS) based hybrid cotton. The first CGMS based cotton
hybrid was released for commercial cultivation in the Vidarbha region of Maharashtra under the name of
PKV Hy3 while was developed at Cotton Research Station of Punjabrao Deshmukh Krishi Vidyapeeth
(PDKV), Akola in 1993. However, yield of this hybrid is also 10-15 lower than conventional hybrid
developed using the same parents.
Now, concerted efforts are being made by various cotton research centres to release CGMS
based cotton hybrids. Some CGMS based hybrids are already in the pipelines which are expected to be
released in years ahead. There are several problems associated with CGMS hybrids such as low
productivity, susceptibility to insect pests etc. efforts are on to overcome these problems are in the
pipeline. In diploid cotton, the main constraint in the spread of hybrid cultivation is non-availability of
hybrid seed due to low seed setting.
Cotton hybrids are cultivated in South and Central zones. In north zone less than 1% cotton area
is covered by hybrids. The currently cultivated hybrids include H6, H8, H10 in Gujarat; DCH 32, DHB 105
and DHH 11 in Karnataka; Savita, TCHB 213, Surya and Sruthi in Tamil Nadu, LAHH 4 and JKHy-1 and
JKHy-2 in Madhya Pradesh. Diploid hybrids cover very little area (1%).
Table-3: Important Features of Tetraploid Cotton Varieties Released From Different States of India
R=Rainfed yield
*G.barbadense varieties.
Table-4: Important Features of Diploid Cotton Varieties Released from Different States of India
R=Rainfed yield
*G.herbaceum varieties
Table -5: Important Features of Cotton Hybrids Released from Different States of India
R=Rainfed yield
HH=Intra-hirsutum, HB=hirsutum x barbadense, AA=Intra-arboreum,
hA=herbaceum x arboreum
SIGNIFICANT ACHIEVEMENTS
In India, remarkable progress has been made in cotton breeding after independence. The major
achievements of cotton breeding include: (1) improvement in yield, (2) improvement in quality, (3)
resistance to insects and diseases, (4) earliness, and (5) adaptability. These aspects are briefly
discussed below.
Improvement in yield
In cotton, yield is measured in two ways, viz seed cotton yield and lint yield. Seed cotton yield refers to
yield of cotton before ginning. It includes both lint and seed. On the other hand, lint yield refers to yield of
fibre after ginning. In cotton, fibre or lint is the main product. In cotton, boll number per plant and boll
weight are the major yield components. Ginning per cent is an important component of lint yield.
In India, significant improvement has been achieved in cotton yield after independence. The present
average (1999-2000) lint yield of cotton is 320 kg/ha which was only 81 kg/ha during 1947-48. Moreover,
the present average seed cotton yield of best variety/hybrid is 40 q/ha which was only 15 q/ha during
1947-48 (Table-6). This increase in cotton yield could be achieved through development of high yielding
varieties and hybrids. India is the pioneer country in the world for successful exploitation of heterosis
(hybrid vigour) in cotton on commercial scale. The first hybrid was released in 1970 from Cotton Research
Station, Surat of Gujarat Agricultural University by late Dr.C.T.Patel. Since then several cotton hybrids
have been released for cultivation in south and central cotton growing zones. Recently, some hybrids
have been released in Punjab (Fateh, LHH 144, LDH 11), Haryana (Dhanalaxmi and AAH1) and
Rajasthan (RAJ HH 16). Hybrid Omshankar has been released for cultivation in the entire northern zone.
Besides hybrids, superior varieties have been released in all cotton growing states of India. The first
cotton hybrid i.e. H4 which was developed at Surat, recorded seed cotton yield up to 100 q/ha under
telephone system of cotton cultivation under Gujarat conditions. Hybrids with high yield potential have
also been released in diploid cottons (DH 7, DH 9, Pha 46, LDH 11 and DDH 2) from Surat, Parbhani,
Ludhiana and Dharwad. All India Coordinated Cotton Improvement Project (AICCIP) has played
significant role in the development of high yielding varieties and hybrids.
In cotton, fibre or lint is the main product. Fibre quality includes fibre length, strength, fineness, maturity
and uniformity. The spinning capacity is also an indication of fibre quality. Significant achievements have
been made in fibre quality especially fibre length and spinning capacity. The MCU 5 was the first extra
long staple variety of G.hirsutum released in India. Lateron, still better variety known as MCU 9 was
released. In G.barbadense, release of variety Sujata resulted in significant breakthrough in quality
improvement. It was capable of spinning 100 counts and was comparable to several Egyptian and Sudan
types. In G.barbadense release of another variety named as Suvin which is capable of spinning 120
counts, is a distinct landmark in the quality improvement in India. This variety is cultivated in Tamil Nadu
and is comparable to Egyptian Giza 45 in quality. At present, the staple length of best variety is 37 mm
and spinning ability is 120 counts which were 24 mm and 28 counts in 1947-48. Thus, significant
improvement has been made in fibre length and spinning cspacity. Moreover, long staple varieties have
also been released in G.arboreum. The long staple varieties of G.arboreum include K 8, K 9, K 10, K 11,
Saraswati and AKA 8401. In cotton, there is an increasing demand for easy care fabrics that are washed
easily and need little pressing. Some varieties have been developed which have easy care properties.
Cotton crop is attacked by several diseases and insect pests resulting in considerable losses in yield. The
genetic resistance is the cheapest and the best way of reducing such losses in yield. In India, work on
insect and disease resistance breeding has been extensively reviewed by various workers. In upland
cotton, variety MCU 5 VT resistant to Verticillum wilt was released from Coimbatore. In G.arboreum and
G.herbaceum, all the varieties released after 1967 are resistant to Fusarium wilt. In G.hirsutum, some
jassid resistant varieties (B 1007, SRT 1, Khandwa 2, DHY 286, PKV 081) and hybrids (PKV hy2 and
NHH 44) have been released. Varieties LK 861 and Kanchana are resistant to white fly. In USA,
Monsanto Seed Company has developed transgenic cotton which is resistant to Helicoverpa armigera.
Earliness
Earliness is a desirable character which has several advantages.Early varieties permit multiple crossing
system, escape from late season pests, reduce costs on pesticidal sprays and crop management
resulting in reduction in the cost of cultivation. In cotton, maturity duration has been significantly reduced.
Most of the earlier cotton varieties used to mature in 240-270 days. Similarly, hybrids had maturity
duration of 230-240 days. This maturity duration has been reduced from 270 days to 170 days in case of
varieties and from 240 days to 180 days in case of hybrids. Variety LRK 516 matures in 170 days and
hybrid H 8 matures in 180 days. Early varieties/ hybrids have less incidence of pink bollworm compared to
long duration varieties.
Adaptability
Adaptability refers to capacity of a variety for adaptation over a wide range of environmental conditions. In
other words, it refers to suitability of a variety for general cultivation over a wide range of environmental
conditions. Adaptability of a variety is measured in terms of phenotypic stability over multilocations.
Varietal adaptability is important for stabilization of production over regions and seasons. In cotton, some
varieties and hybrids with wide adaptability have been released from 1970 onwards. Examples of
adaptable varieties are Bikaneri Narma, MCU 5, SRT 1 and LRA 5166. Variety Bikaneri Narma was
developed in Punjab, which spreads to Haryana, Rajasthan and Northern Madhya Pradesh due to its
wide adaptability. Variety SRT 1 was released in Gujarat but also became popular in Maharashtra and
Madhya Pradesh. Similarly, varieties MCU 5 and LRA 5166 released for Tamil Nadu state spread to
Andhra Pradesh, Maharashtra and Madhya Pradesh by virtue of their wide adaptability. Hybrid H 4 was
released for Gujarat state in 1970 but by virtue of its wide adaptation it spread to other states like
Maharashtra, Madhya Pradesh, Andhra Pradesh and Karnataka. Similarly, hybrid DCH 32 (Jayalaxmi)
was released for Karnataka state, but to its wide adaptability it spread to Tamil Nadu, Andhra Pradesh
and Western Maharashtra.
FUTURE THRUSTS
The present mills’ requirement of cotton in India is about 140 lakh bales per annum. This will be
about 190 lakh bales by 2001 A.D. To keep pace with the increasing cotton demands, the future breeding
efforts have to be made on the following thrust areas.
1. Development of cytoplasmic genic male sterility (CGMS) based hybrids for irrigated
and rainfed conditions.
2. Development of short duration (165 days) tetraploid or diploid hybrids with 4 tonnes
of seed cotton yield / hectare for northern zone.
4. Development of short duration, short statured and compact cultivars in tetraploid cotton to achieve
quantum jump in the productivity by adopting closer spacing
(population explosion).
7. In North zone, there is an increasing incidence of leaf curl virus in upland cotton
(G.hirsutum). Hence, there is need to develop varieties of upland cotton resistant to leaf
curl virus for northern zone.
10. Development of varieties / hybrids with high fibre strength suitable for high speed (jet
and rotobar) spinning. Development of such cultivars is also necessary to compete in
the global market.
12. Development of neps and motes free intra-barbadense hybrids for irrigated areas of
Tamil Nadu.
13. There is an increasing demand of naturally coloured cotton. Hence, efforts have to be
made to develop high yielding and good quality varieties and hybrids of naturally
coloured cotton.
14. There is demand from some countries like Germany and U.K. for organic cotton.
Hence, there is need to develop varieties and hybrids of cotton suitable for organic
cultivation.