0% found this document useful (0 votes)
172 views2 pages

2n Ip Force Intercom Range Datasheet

Uploaded by

Marko
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
172 views2 pages

2n Ip Force Intercom Range Datasheet

Uploaded by

Marko
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

DATASHEET

2N® IP FORCE
TOUGHEST IP INTERCOM IN THE WORLD

2N® IP Force is an extremely durable IP intercom that can withstand even the most demanding conditions.
It provides for visitor communication monitoring and access control. Take advantage of its superior features
for maximum site security.

• Built for extreme conditions


• Professional night vision
• Clear sound in noisy environments
• Durable access control solution
• Wide-angle HD camera
• Easy integration into CCTV and VMS
VARIANTS

1 button 1 button, 4 buttons 2 buttons, 1 button, pictograms,


keypad card reader ready card reader ready

With HD camera 9151101CHW 9151101CHKW 9151104CHW 9151102CHRW 9151101CHRPW


With SD camera 9151101CW 9151101CKW 9151104CW 9151102CRW 9151101CRPW
Without camera 9151101W 9151101KW 9151104W 9151102RW 9151101RPW

TECHNICAL PARAMETERS

Signalling protocol Interface


SIP (UDP, TCP, TLS) Power supply 12 V / 2A DC or PoE
PoE PoE 802.3af (Class 0 – 12,95 W)
Button LAN 10/100BASE-TX with Auto-MDIX, RJ-45
Button design Transparent, white backlit buttons with Recommended cabling Cat-5e or higher
easily replaceable label
Passive switch NO/NC contacts, max. 30 V/1A AC/DC
Count of buttons 1, 2 or 4
Active switch output 9 up to 13 V DC depending on power supply,
Numerical keypad Optional
max. 700 mA
RFID card reader
Audio
Supported frequencies 125kHz and 13.56MHz
Microphone 2 integrated microphones
125 kHz EM4100, EM4102, HID Proximity
Amplifier 10 W (class D)
13.56 MHz ISO14443A, ISO14443B, ISO15693, NFC
Speaker 1 W (10 W optional)
support
Volume control Adjustable with automatic adaptive mode
reads UID (CSN)
Full duplex Yes (AEC)
reads PACs ID (iCLASS SIO-enabled cards)
- only secured cards
Audio stream
Protocols RTP/RTSP
Mechanical properties
Codecs G.711, G.722, G.729, L 16/16kHz
Mechanical properties

Camera HD / SD Cover Robust aluminium casting

Sensor 1/3‘‘ colour CMOS / 1/4‘‘ colour CMOS Operating temperature -40 °C to 55 °C
JPEG resolution 1280 (H) x 960 (V) / 640 (H) × 480 (V) Storage temperature -40 °C to 70 °C
Video resolution 640 (H) × 480 (V) Operating relative
Frame rate Up to 30 snapshots/s humidity 10%-95% (non-condensing)
Sensor sensitivity 5.6 V/lux-sec (550 nm) / 1.9 V/lux-sec Dimensions 217 × 109 × 83 mm
(550 nm) 242 × 136 × 83 mm with frame
View angle 135° (H), 109° (V) Weight net max. 2 kg / gross max. 2,5 kg
Infrared light Yes Covering level IP69K and IK10

Video stream
Protocols RTP/RTSP/HTTP
Codecs H.263, H.263+, H.264, MPEG-4, M-JPEG
IP camera function Yes, ONVIF v2.4 profile S compatible

2N TELEKOMUNIKACE a.s., Modřanská 621, 143 01 Prague 4, CZ, +420 261 301 500, [email protected], www.2n.cz

You might also like