Scribd Logo
Upload

Welcome to Scribd!

  • 156 views

    Grounding - The Removal of A Charge

    Uploaded by

    imanuelsukarno
    The document discusses the process of grounding, which removes excess charge from an object. Grounding involves transferring electrons between a charged object and a ground, which acts as a large reservoir of electrons. Whether an object is positively or negatively charged, grounding equalizes the number of protons and electrons through the transfer of electrons from or to the ground. The process works because excess charge causes repulsion, which is reduced when electrons spread over a larger object. An effective ground is sufficiently large to share most excess charge. A conducting pathway is also required to allow electron flow during grounding.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    Grounding - The Removal of A Charge

    Uploaded by

    imanuelsukarno
    156 views3 pages
    The document discusses the process of grounding, which removes excess charge from an object. Grounding involves transferring electrons between a charged object and a ground, which acts as a large reservoir of electrons. Whether an object is positively or negatively charged, grounding equalizes the number of protons and electrons through the transfer of electrons from or to the ground. The process works because excess charge causes repulsion, which is reduced when electrons spread over a larger object. An effective ground is sufficiently large to share most excess charge. A conducting pathway is also required to allow electron flow during grounding.

    Original Title

    Grounding - The Removal of a Charge

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document discusses the process of grounding, which removes excess charge from an object. Grounding involves transferring electrons between a charged object and a ground, which acts as a large reservoir of electrons. Whether an object is positively or negatively charged, grounding equalizes the number of protons and electrons through the transfer of electrons from or to the ground. The process works because excess charge causes repulsion, which is reduced when electrons spread over a larger object. An effective ground is sufficiently large to share most excess charge. A conducting pathway is also required to allow electron flow during grounding.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    156 views3 pages

    Grounding - The Removal of A Charge

    Uploaded by

    imanuelsukarno
    The document discusses the process of grounding, which removes excess charge from an object. Grounding involves transferring electrons between a charged object and a ground, which acts as a large reservoir of electrons. Whether an object is positively or negatively charged, grounding equalizes the number of protons and electrons through the transfer of electrons from or to the ground. The process works because excess charge causes repulsion, which is reduced when electrons spread over a larger object. An effective ground is sufficiently large to share most excess charge. A conducting pathway is also required to allow electron flow during grounding.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 3

    Static Electricity - Lesson 2

    Methods of Charging

    Grounding - the Removal of a Charge


    The previous three sections of Lesson 2 discussed the three common methods of charging - charging by friction, charging by induction, and charging by conduction. A discussion of charging would not be complete without a discussion of uncharging. Objects with an excess of charge - either positive or negative - can have this charge removed by a process known as grounding. Grounding is the process of removing the excess charge on an object by means of the transfer of electrons between it and another object of substantial size. When a charged object is grounded, the excess charge is balanced by the transfer of electrons between the charged object and a ground. A ground is simply an object that serves as a seemingly infinite reservoir of electrons; the ground is capable of transferring electrons to or receiving electrons from a charged object in order to neutralize that object. In this last section of Lesson 2, the process of grounding will be discussed. To begin our discussion of grounding, we will consider the grounding of a negatively charged electroscope. Any negatively charged object has an excess of electrons. If it is to have its charge removed, then it will have to lose its excess electrons. Once the excess electrons are removed from the object, there will be equal numbers of protons and electrons within the object and it will have a balance of charge. To remove the excess of electrons from a negatively charged electroscope, the electroscope will have to be connected by a conducting pathway to another object that is capable of receiving those electrons. The other object is the ground. In typical electrostatic experiments and demonstrations, this is simply done by touching the electroscope with one's hand. Upon contact, the excess electrons leave the electroscope and enter the person who touches it. These excess electrons subsequently spread about the surface of the person.

    This process of grounding works because excess electrons find each other repulsive. As is always the case, repulsive affects between like-charged electrons forces them to look for a means of spatially separating themselves from each other. This spatial separation is achieved by moving to a larger object that allows a greater surface area over which to spread. Because of the relative size of a person compared to a typical electroscope, the excess electrons (nearly all of them) are capable of reducing the repulsive forces by moving into the person (i.e., the ground). Like contact charging discussed earlier, grounding is simply another example of charge sharing between two objects. The extent to which an object is willing to share excess charge is proportional to its size. So an effective ground is simply an object with significant enough size to share the overwhelming majority of excess charge. The previous discussion describes the grounding of a negatively charged electroscope. Electrons were transferred from the electroscope to the ground. But what if the electroscope is positively charged? How does electron transfer allow an object with an excess of protons to become neutralized? To explore these questions, we will consider the grounding of a positively charged electroscope. A positively charged electroscope must gain electrons in order to acquire an equal number of protons and electrons. By gaining electrons from the ground, the electroscope will have a balance of charge and therefore be neutral. Thus, the grounding of a positively charged electroscope involves the transfer of electrons from the ground into the electroscope. This process works because excess positive charge on the electroscope attracts electrons from the ground (in this case, a person). While this may disrupt any balance of charge present on the person, the significantly larger size of the person allows for the excess charge to distance itself further from each other. As in the case of grounding a negatively charged electroscope, the grounding of a positively charged electroscope involves charge sharing. The excess positive charge is shared between the electroscope and the ground. And once again, the extent to which an object is willing to share excess charge is proportional to its size. The person is an effective ground because it has enough size to share the overwhelming majority of excess positive charge.

    The Need for a Conducting Pathway

    Any object can be grounded provided that the charged atoms of that object have a conducting pathway between the atoms and the ground. A common lab activity involves taping two straws to a charged aluminum plate. One straw is covered with aluminum foil and the other straw is bare plastic. When the aluminum-covered straw is touched, the aluminum plate loses its charge. It is grounded by means of the movement of electrons from the ground to the aluminum plate. When the plastic straw is touched, grounding does not occur. The plastic serves as an insulator and prevents the flow of electrons from the ground to the aluminum plate. Grounding requires a conducting pathway between the ground and the object to be grounded. Electrons will travel along that pathway.

    Lesson 2 of this unit of The Physics Classroom has been focused on methods of charging and discharging objects. One principle that continually arose was the relationship between force and distance. This relationship will be explored in Lesson 3.

    You might also like