Scribd Logo
Upload

Welcome to Scribd!

  • 59 views

    Manual ATS 4000 NTS

    Uploaded by

    Victor Ortega Sam
    This document provides instructions for manual operation of non-automatic transfer switches in the 4000 Series. It describes that the transfer switch does not automatically transfer the electrical load if the source fails, and the membrane buttons must be pressed to transfer the load between sources. It shows the buttons to press to connect the load to the normal or emergency source, and notes you must hold the emergency button for 15 seconds or until the generator starts. It also describes indicator lights that show if the user controls are locked or unlocked, and how to temporarily unlock them using the controller password.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Manual ATS 4000 NTS

    Uploaded by

    Victor Ortega Sam
    59 views1 page
    This document provides instructions for manual operation of non-automatic transfer switches in the 4000 Series. It describes that the transfer switch does not automatically transfer the electrical load if the source fails, and the membrane buttons must be pressed to transfer the load between sources. It shows the buttons to press to connect the load to the normal or emergency source, and notes you must hold the emergency button for 15 seconds or until the generator starts. It also describes indicator lights that show if the user controls are locked or unlocked, and how to temporarily unlock them using the controller password.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for manual operation of non-automatic transfer switches in the 4000 Series. It describes that the transfer switch does not automatically transfer the electrical load if the source fails, and the membrane buttons must be pressed to transfer the load between sources. It shows the buttons to press to connect the load to the normal or emergency source, and notes you must hold the emergency button for 15 seconds or until the generator starts. It also describes indicator lights that show if the user controls are locked or unlocked, and how to temporarily unlock them using the controller password.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    59 views1 page

    Manual ATS 4000 NTS

    Uploaded by

    Victor Ortega Sam
    This document provides instructions for manual operation of non-automatic transfer switches in the 4000 Series. It describes that the transfer switch does not automatically transfer the electrical load if the source fails, and the membrane buttons must be pressed to transfer the load between sources. It shows the buttons to press to connect the load to the normal or emergency source, and notes you must hold the emergency button for 15 seconds or until the generator starts. It also describes indicator lights that show if the user controls are locked or unlocked, and how to temporarily unlock them using the controller password.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    4000 Series

    Operator’s Non–Automatic Transfer Switches


    Manual 4NTS, 4NCTS, 4NDTS

    Refer to the outline and wiring drawings provided


    Non–Automatic Manual Operation
    with your 4000 Series N–ATS for all installation and The transfer switch does not transfer the electrical load
    connection details and accessories. automatically if the connected source fails. The membrane
    buttons must be pressed to transfer the load from one
    source to the other source. See illustration below.
    Refer to the Operator’s Manual provided with your 4000
    Series non–automatic transfer switch for installation,
    testing, and service. For electrical operation refer to the To connect the load to To connect the load to
    illustration below for manual transfer control. the Normal source. the Emergency source

    Refer to Group 5 Controller User’s Guide 381333–126 Push Transfer to Normal Push & hold* Transfer to
    for ATS status display messages, time delays, pickup button. Emergency button.
    & dropout settings, and adjustments.
    Transfer Transfer to
    to Normal Emergency

    * Hold button 15 seconds or until


    generator starts and runs.

    press
    these buttons

    Transfer Transfer to
    to Normal Emergency
    If this light is on, the buttons will not work
    Press for 15 Sec. until they are unlocked. See below.
    observe If this light is blinking, the buttons are
    these lights temporarily unlocked for 5 minutes.

    Figure 1. Controls and indicators for non–automatic operation.

    User Controls Locked How to temporarily unlock the user controls


    If the User Controls Locked light is on, the Transfer Test and (if the User Controls Locked light is on)
    Retransfer to Normal buttons will not work until you unlock Press up or down arrow keys on Transfer Control
    them. Center (Group 5 Controller), enter the password, and
    press Enter key. The user controls are now unlocked
    To permanently unlock or lock the user controls refer to the for 5 minutes. During that time the light will blink.
    Group 5 Controller User’s Guide 381333–126. Password
    information and time delay settings are provided there.

    50 Hanover Road, Florham Park, New Jersey 07932–1591 USA 381333–291


    For sales or service call 1 800 800–2726 (ASCO) www.ascopower.com

    ASCO POWER TECHNOLOGIES CANADA PO Box 1238, 17 Airport Road, Brantford, Ontario, Canada N3T 5T3
    telephone 519 758–8450, fax 519 758–0876, for service call 1 888 234–2726 (ASCO) www.asco.ca

    You might also like