Taper KIT (OTSK) Taper Ultra KIT (HULTPK)

Top panel components Lower panel components

Torque Wrench Open Wrench

TW30B SPOW
For For
Ratchet Wrench
Depth Gauge RCWC
OSDG

058 059
OSSTEM KIT

OSSTEM KIT
 Taper KIT Surgical Instruments

Taper Drill Taper Ultra Drill

1mm For Normal /
Taper drill for taper ultra-wide fixture by diameter and length hard bone
Stopper maintains a
1mm margin Stopper drill with 1mm space For soft bone
Color coding displays fixture diameter
Taper drill for taper(III type) fixture by F = Fixture
1
diameter and length
Stopper drill with 1mm space F6.0 F7.0
L
Color coding displays fixture diameter
F3.5 : yellow, F4.0 : green, F4.5 : blue, TL 6 TPD3C6006 TPD3C7006
F5.0 : red, F5.5 : yellow 7 TPD3C6007 TPD3C7007
Taper KIT single item
13
8.5 TPD3C6008 TPD3C7008
(excluded from 122 taper KIT)
10 11.5 (L) 10 TPD3C6010 TPD3C7010
7 8.5
11.5 TPD3C6011 TPD3C7011
Y-Dim.
13 TPD3C6013 TPD3C7013
Color Green Blue
L TL F3.5 F4.0 F4.5 F5.0 F5.5
Y-Dim. 0.8 0.9 1.0 1.0 1.0
5.0 29.5 TPD3C3505 TPD3C4005 TPD3C4505 TPD3C5005 -
6.0 30.5 TPD3C3506 TPD3C4006 TPD3C4506 TPD3C5006 TPD3C5506
7.0 31.5 TPD3C3507 TPD3C4007 TPD3C4507 TPD3C5007 TPD3C5507
060 8.5 33 TPD3C3508 TPD3C4008 TPD3C4508 TPD3C5008 TPD3C5508 061
10 34.5 TPD3C3510 TPD3C4010 TPD3C4510 TPD3C5010 TPD3C5510 Cortical Drill for Ultra-Wide
OSSTEM KIT

OSSTEM KIT
11.5 34.5 TPD3C3511 TPD3C4011 TPD3C4511 TPD3C5011 TPD3C5511 Drill used to remove cortical bone at hard bone (for ultra-wide)

13 36 TPD3C3513 TPD3C4013 TPD3C4513 TPD3C5013 TPD3C5513 Dedicated drill for each fixture diameter
It is recommended to drill to the bottom of the marking line 33
15 38 TPD3C3515 TPD3C4015 TPD3C4515 TPD3C5015 TPD3C5515
F = Fixture
Color Yellow Green Blue Red Yellow

F6.0 F7.0
CD4C60 CD4C70

Taper Cortical Drill

for Taper Fixture (TSIII, SSIII, USIII)
Drill used to remove cortical bone at hard bone
(Use immediately after taper drill)
36
Dedicated drill for each fixture diameter Parallel Pin for Taper Drill 3
F3.5~5.0 drill marking line : bottom line 8.5mm or less,
Parallel pin for taper drill
2 10
top line 10mm or more fixture placement standard 2
F5.5 drill marking line : bottom line 6mm or less, middle line 7mm, Used for checking position and direction of bone preparation
The lower part is for fixture diameter drill and the upper part is for initial drill 3 19
top line 8.5mm or more fixture placement standard
It is recommended to drill to the bottom of the marking line Color coding by fixture diameter
(F3.5 : yellow, F4.0 : green, F4.5 : blue, F5.0 : silver) 3
Taper KIT single item (excluded from 122 taper KIT) 7
122 taper & taper KIT common components 2
F = Fixture 2

F3.5 F4.0 F4.5 F5.0 F5.5 F3.5 F4.0 F4.5 F5.0

TCD4C35 TCD4C40 TCD4C45 TCD4C50 TCD4C55 TPP3522 TPP4022 TPP4522 TPP5022
 Taper KIT Surgical Instruments

Tapered Fixture Tap

for TSIII, USIII, SSIII SA
Tap for tapered fixture (III type)
Used in hard bone and forming fixture screw thread 35.4 34.7
Engine (25rpm recommended) or torque wrench after mount extension fastening
Taping to the bottom of the marking line is recommended.
(for F5.0, the bottom line below 7.0mm fixture and the upper line over 8.5mm fixture
placement standard)
F = Fixture

F3.5 F4.0 F4.5 F5.0

OFTS35 OFTS40 OFTS45 OFTS50

※ Refer to surgical instruments for other components (106p~)

062 063
OSSTEM KIT

OSSTEM KIT
 Drilling Sequence Taper Drill Taper cortical drill marking line Bottom line 8.5mm or more, top line 10mm or more fixture placement standard
Recommended placement torque Below than 40Ncm, TSIII/SSIII HA : below than 35Ncm (In hard bone, HA coating layer cracking and peeling can occur)

TSIII SSIII USIII TS fixture placement depth The normal bone is placed 1mm deeper than bone level, and the soft bone is placed at the bone level to maintain the fixed strength
Fixture tap used in hard bone : engine (25rpm recommended) or torque wrench after mount extension fastening
(Length : 10mm) (F5.0 fixture tap : bottom line 7mm or less, top line 8.5mm or more fixture placement standard)

Ø 3.0mm Ø 4.5mm

10mm 10mm

Y-Dim Y-Dim
F3.0 F3.5 F4.0 F4.5 F4.5 Taper F4.5 Taper
Bone Quality Ø2.2 Drill Ø2.7 Drill Ø3.0 Fixture Bone Quality Ø2.2 Drill Ø4.5 Fixture
Cortical Drill Taper Drill Taper Drill Taper Drill Cortical Drill Fixture Tap

Soft ▶ Soft ▶ ▶ ▶

Normal ▶ ▶ Implant Placement Normal ▶ ▶ ▶

Implant Placement
Hard ▶ ▶ ▶ ▶
Hard ▶ ▶ ▶
Hard (Option) ▶ ▶ ▶ ▶

Ø 3.5mm
Ø 5.0mm

064 065
10mm
OSSTEM KIT

OSSTEM KIT
10mm
Y-Dim
F3.5 F3.5 Taper F3.5 Taper Y-Dim
Bone Quality Ø2.2 Drill Ø3.0 Drill Cortical Drill Fixture Tap Ø3.5 Fixture
Taper Drill F3.5 F4.5 F5.0 F5.0 Taper F5.0 Taper
Bone Quality Ø2.2 Drill Ø5.0 Fixture
Soft ▶ ▶ Taper Drill Taper Drill Taper Drill Cortical Drill Fixture Tap

Normal ▶ ▶ Soft ▶ ▶ ▶
Implant Placement
Hard ▶ ▶ ▶ Normal ▶ ▶ ▶ ▶
Implant Placement
Hard (Option) ▶ ▶ ▶ Hard ▶ ▶ ▶ ▶ ▶
Hard (Option) ▶ ▶ ▶ ▶ ▶

Ø 4.0mm
Ø 5.5mm

10mm

10mm
Y-Dim
F3.5 F4.0 F4.0 Taper F4.0 Taper
Bone Quality Ø2.2 Drill Ø4.0 Fixture Y-Dim
Taper Drill Taper Drill Cortical Drill Fixture Tap
F3.5 F4.5 F5.5 F5.5 Taper
Bone Quality Ø2.2 Drill Ø5.5 Fixture
Soft ▶ ▶ Taper Drill Taper Drill Taper Drill Fixture Tap
Normal ▶ ▶ ▶ Soft ▶ ▶ ▶
Implant Placement
Hard ▶ ▶ ▶ ▶ Normal ▶ ▶ ▶ ▶ Implant Placement
Hard (Option) ▶ ▶ ▶ ▶ Hard ▶ ▶ ▶ ▶ ▶
 Drilling Sequence Taper Drill Drilling Sequence Taper Drill
TSIV USIV TSIII Ultra-wide SSIII Ultra-wide USIII Ultra-wide
(Length : 10mm) (Length : 10mm)

Ø 4.0mm Ø 6.0mm

10mm 10mm

Y-Dim Y-Dim
F3.5 Ø2.2 Ø2.0/3.0 Ø3.0 Ø3.0/3.8 Ø3.8 F6.0 F6.0 F6.0
Bone Quality Ø2.2 Drill Taper Drill Ø4.0 Fixture Bone Quality Pilot Drill Drill Pilot Drill Ø6.0 Fixture
Drill Drill Taper Drill Taper Drill Cortical Drill

D4 ▶ Soft ▶ ▶ ▶ ▶ ▶
Implant Placement
Soft ▶ ▶ Normal ▶ ▶ ▶ ▶ ▶ ▶ Implant Placement

Hard ▶ ▶ ▶ ▶ ▶ ▶ ▶

Ø 4.5mm Ø 7.0mm

066 067
OSSTEM KIT

OSSTEM KIT
10mm 10mm

Y-Dim Y-Dim
F3.5 F4.0 Ø2.2 Ø2.0/3.0 Ø3.0 Ø3.0/3.8 Ø3.8 F6.0 F7.0 F7.0 F7.0
Bone Quality Ø2.2 Drill Ø3.0 Drill Ø4.5 Fixture Bone Quality Ø7.0 Fixture
Taper Drill Taper Drill Drill Pilot Drill Drill Pilot Drill Drill Taper Drill Taper Drill Taper Drill Cortical Drill
D4 ▶ Soft ▶ ▶ ▶ ▶ ▶ ▶
Implant Placement
Soft ▶ ▶ ▶ Normal ▶ ▶ ▶ ▶ ▶ ▶ ▶ Implant Placement

Hard ▶ ▶ ▶ ▶ ▶ ▶ ▶ ▶

Ø 5.0mm

10mm

Y-Dim
F3.5 F4.5
Bone Quality Ø2.2 Drill Ø3.0 Drill Ø5.0 Fixture
Taper Drill Taper Drill
Recommended placement torque Below than 40Ncm
D4 ▶
Implant Placement TS fixture placement depth The normal/hard bone is placed 1mm deeper than bone level, and the soft bone is placed at the bone
Soft ▶ ▶ ▶ level to maintain the fixed strength
 Drilling Sequence Taper Drill
TSIV Ultra-wide
(Length : 10mm)

Ø 6.0mm

10mm

Y-Dim
Ø2.0/3.0 F6.0
Bone Quality Ø2.2 Drill Ø3.0 Drill Ø3.8 Drill Ø6.0 Fixture
Pilot Drill Taper Drill

D4 ▶ ▶
Implant Placement
Soft ▶ ▶ ▶ ▶

Ø 7.0mm

068 069
OSSTEM KIT

OSSTEM KIT
10mm

Y-Dim
Ø2.0/3.0 F7.0
Bone Quality Ø2.2 Drill Ø3.0 Drill Ø3.8 Drill Ø7.0 Fixture
Pilot Drill Taper Drill
D4 ▶ ▶
Implant Placement
Soft ▶ ▶ ▶ ▶

Recommended placement torque Below than 40Ncm

TS fixture placement depth The normal/hard bone is placed 1mm deeper than bone level, and the soft bone is placed at the bone
level to maintain the fixed strength