Non Potable Water Irrigation System | Design Guide

The Intelligent Use of Water™

 Non Potable Water Irrigation System | Design Guide

Contents
Non-Potable Water Irrigation Systems . . . . . . . . . . . . . . . . . . . 3
Reclaimed Water for Irrigation Applications . . . . . . . . . . . . . . 4
Anatomy of a Non-Potable Water Irrigation System . . . . . . 5
Pump Stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
LC Series Pump Stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
CLP Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Central Control and Controllers . . . . . . . . . . . . . . . . . . . . . . . . . 13
The New Rain Bird® IQ™ Platform . . . . . . . . . . . . . . . . . . . . . . . . 14
Rain Bird® ESP-LX Series Controllers . . . . . . . . . . . . . . . . . . . . . 15
ESP-LXD Series Two-Wire Decoder Controller . . . . . . . . . . 16
Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
PESB-R Series Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
EFB-CP Series Brass Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Wide Flow Commercial Control Zone Kit . . . . . . . . . . . . . . . . 21
1.5" Inline Commercial Control Zone Kit . . . . . . . . . . . . . . . . . 22
Quick Coupling Valves Brass Irrigation Valves . . . . . . . . . . . 23
Purple Valve Boxes and Lids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Purple Valve Handle Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Emission Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
3500 Series Rotors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
5000 Series Rotors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Falcon® 6504 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
8005 Series Rotors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
2045A Maxi-Paw™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
RD1800™ Series Spray Heads . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
PA-8S-NP Shrub Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
1800 NP Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
XFD Purple On-Surface Dripline . . . . . . . . . . . . . . . . . . . . . . . . 35
XFS-CV Dripline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
XBS - Black Stripe Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Removable Flush Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
PC Diffuser Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
RWS/RWS-Mini Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Top Green Codes and Green Programs . . . . . . . . . . . . . . . . . . 39

2 www.rainbird.com
Non Potable Water Irrigation System | Design Guide

Non-Potable Water Irrigation Systems

As water conservation becomes increasingly

important, designing and maintaining
landscape spaces that will ensure
sustainability is becoming more critical
than that ever.

New Green Codes are becoming more

prevalent than ever before, stronger
regulations for landscape irrigation of areas
such as, parks, schools cemeteries, multi-unit
housing complexes and other approved
uses worldwide requiring the use of recycled
water.

This guide will provide you with the right

tools and resources that you need to design
with the latest non-potable irrigation
solutions and achieve maximum water
savings for your next green project.

Designed to stand up to the harsh chemicals

that are often found in recycled water,
Rain Bird Non-potable products provide
everything you need to use this valuable
resource more effectively and efficiently.

www.rainbird.com 3
 Non Potable Water Irrigation System | Design Guide

Reclaimed Water for Irrigation Applications

If you’re interested in using recycled water for irrigation, you must first determine whether it’s feasible for your
property. The first step is ensuring that you have access to a recycled water supply. Even the most progressive
water utilities and districts currently recycling wastewater are not able to provide it to all areas and addresses
within their jurisdiction.

Business, Retail, and

Shopping Centers
Municipal Buildings,
Hospitals, Schools,
and Universities

Parks and Recreation,

Public Spaces, Cemetaries, Hotels, Resorts,
and Sports Fields Residential Developments,
and Theme Parks

Only Rain Bird offers end-to-end solutions for recycled water applications and has been a leading advocate for The
Intelligent Use of Water™ for over 80 year, leading the way in reclaimed water use, with end-to-end solutions that let
us get more from every drop.

1 2 3 4
Pump Stations Central Control Valves Emission Devices

4 www.rainbird.com
Non Potable Water Irrigation System | Design Guide

Anatomy of a Non-Potable Water Irrigation System

Falcon® 6504 Series Rotors 4

BPE-NP-HAN
(NP Handles for 3" BPE 
and BPES valves) 2045A Maxi-Paw
EFB-CP Series Series Rotors
Brass Valves
(Chlorine-resistant valves
for reclaimed water usage) 3 8005 Series Rotors

5000 Series Rotors

4
PVB-JMBP 3500 Series Rotors
(Jumbo Box
and Purple Lid)

3 PA-8S-NP
(Plastic Shrub Adapter)

RD1800 Non-potable
PGA-NP-HAN Water Spray
(NP Handles for 1"
and 11⁄2" PGA valves) 1800 NP Clip-On Cover
(1800® Series)
PGA-NP-HAN2 XCZ-150-LCDR:
(NP Handles for VB-STDP
2" PGA valves) (Standard Box 1.5” Inline Control Zone Kits
and Purple Lid)

33DNP
44NP 3
5NP
(Locking NP Lids for Quick
Coupling valves)

1
VB-7RNDP 3
LC Series
(7" Round Box
and Purple Lid) PESB-NP-HAN1
(NP Handles for
4
Light Commercial 1" PESB valves)
Pump Station PESB-NP-HAN2
CLP Pump Series (NP Handles for 11⁄2" and
2" PESB valves)

ESP-LXMEF
ESP-LXD
Controllers

XFD Dripline

IQ™ Platform
2 Black Stripe
Tubing with MDCFPCAP/
Non-Potable Emission MDCFCOUP
Water Source Devices (Purple Flush
Cap with Fitting)

Irrigation design is for graphical representation only.

www.rainbird.com 5
 Non Potable Water Irrigation System | Design Guide

Anatomy of a Commercial Non-Potable Landscape Drip

Water Irrigation System • Control Zone Kits
This non-potable design guide highlights Rain Bird product and technology • Purple PC Diffuser Cap
solutions for a healthy landscape that uses non-potable water. • Purple Flush Cap with Fitting

Rotors
Purple Covers for
Rotors:
• 3500
• 5000/5000 Plus
• Falcon® 6504
• 8005
• 2045A Maxi-Paw™

Valves
Durable chlorine-resistant
valves and accessories for
reclaim applications:
• PESB-R
• EFB-CP
• Quick-coupling Valves
• Valve Boxes and covers

Non-Potable Water
Supply
There are multiple potential water
harvesting sources. Common
sources on a commercial site are:
• Rainwater harvesting Central Control
• Stormwater harvesting
and Controllers
• HVAC condensate
• Greywater from showers, • IQ V3.0 Platform
sinks, washers • ESP-LXMEF Modular Controllers
• Other • ESP-LXD Series Two-Wire
Decoder Controllers

6 www.rainbird.com
Non Potable Water Irrigation System | Design Guide

XF Dripline
A wide variety of Rain Bird XF Dripline
options for on-grade, sub-surface or sloped
applications available in purple models to
designate use with recycled water systems.

RWS Root
Watering
Purple Grate

Pump Stations Sprays

• LC Series Pump Stations Purple Covers for Spray Heads:
• CLP Series Pump Stations • RD1800 Series Spray Heads
• Purple Plastic Shrub Adapter
• Non-Potable 1800 Spray Head Cover

Irrigation design is for graphical representation only.

www.rainbird.com 7
 Pump Stations
Non Potable Water Irrigation System | Design Guide

8 www.rainbird.com
Non Potable Water Irrigation System | Design Guide

Pump Stations

Rain Bird is the only irrigation manufacturer to offer pump

stations, so you can take a totally integrated approach to
recycled water irrigation with one trusted partner. By ensuring
correct water pressure and delivering the right flow of water,
our pump stations allow you to maximize the efficiency of
your system.

Pump Stations models for Non potable Systems

• LC Series Light Commercial Pump Station
• CLP Pump Series

Case Study
H-E-B Park Edinburg, Texas
PROJECT OVERVIEW:
In Edinburg, Texas, the Rio Grande FC Toros have a new stadium and playing
field. H-E-B Park consists of a 9,700-seat professional soccer stadium, an
outdoor amphitheater, three practice fields for youth soccer, a playground,
and picnic areas. The entire site, including landscaped areas in the parking
lot and surrounding the stadium, use Rain Bird commercial and drip
irrigation products.

RESULTS:
The soccer stadium uses a Rain Bird CLP variable drive pump and ESP-LXD Series Two-Wire controller with IQ-Cloud v. 3.0 for remote
water management. Flow sensors are installed on each system to measure flow at the stadium, practice fields and surrounding
landscape. The sensors send accurate flow data to IQ to enable the flow management feature. IQ manages the irrigation schedules
based on the flow capacity and demand. Doing so enables more efficient use of the pump, which can run continuously without
having to cycle on and off, and helps complete the watering in a short period of time.

Credit category of LEED for the Integrative Process (IP)= I point for the implementation stage when demonstrating
at least one On-Site non potable water supply source was analyzed for at least two of the water demand elements
including landscape irrigation and Site elements.

www.rainbird.com 9
 Non Potable Water Irrigation System | Design Guide

LC Series Pump Stations

The LC Series by Rain Bird is a complete pump
package that includes a professional-grade pump, Discharge Hose Quick Disconnect - Discharge
the highest quality pump protection and simple to
install and operate fixtures all housed in a unique Suction Line
Side Knockout - Electrical
enclosure designed specifically for a pump. With
this complete solution the days of retro fitting often
non-compatible parts together and housing them in
a makeshift enclosure are over.
Glue-on Discharge Fitting

Features
• Complete irrigation pump solution
• Available in ¾, 1, 1 ½, 2 and 3 HP models Pump Weights
• Up to 62 psi boost pressure • LC750: 170 lbs
• Quick disconnects for easy installation • LC1000: 175 lbs
• Powder coated enclosure for long lasting finish • LC1500: 175 lbs
• Pressure loss and high temperature shut down • LC2000: 185 lbs
protection • LC3000: 200 lbs
• Made in the USA
Enclosure
Applications • UL Listed
• Suction lift or boost • Nema 3R
• Potable or recycled water supply • Powder-coated steel
• Residential, Light Commercial, Parks &
Recreational

Model Description Pump Discharge Suction

LC750 Rain Bird LC Series - 3/4 hp, 1 ph, pump 3/4 hp pump 1-1/2" 2"
LC 1000 Rain Bird LC Series - 1 hp, 1 ph, pump 1 hp pump 1-1/2" 2"
LC1500 Rain Bird LC Series - 1 1/2 hp, 1 ph, pump 1.5 hp pump 1-1/2" 2"
LC2000 Rain Bird LC Series - 2 hp, 1 ph, pump 2 hp pump 1-1/2" 2"
LC3000 Rain Bird LC Series - 3 hp, 1 ph, pump 3 hp pump 1-1/2" 2"

How To Specify
q Click the icons below for more information
LC 750
Design & Technical Resources
Model Horse Power
Light ¾ HP
Commercial
Drawings WRITTEN SPECS TECH SPECS RESOURCES Pump

10 www.rainbird.com
Non Potable Water Irrigation System | Design Guide

CLP Series
Rain Bird’s CLP Series pump station is designed for
boost and flooded suction-lift applications. The CLP
Series is a complete pump package that is simple to
install and operate. It includes a professional-grade
pump, a marine-grade aluminum enclosure, highest
quality pump protection, and optional mounting for CLP Series
(Suction Lift shown)
a Rain Bird controller. Home owner associations, small
sports fields, schools, parks, and small agricultural
projects are ideal applications.

Features
• Plumbing Configurations • Fused main power disconnect
-- Inlet and discharge piping on opposite sides of • Pump Control Runs based on signal from irrigation
the enclosure (as shown) controller, or from optional Flow Start Switch
-- ¾” and 2” Priming Ports Included (Boost model only)
• Isolation valve • 130° F Temperature cutout switch
• Marine grade aluminum enclosure and deck

CLP Series Performance Data

Maximum Flow
HP Model Description GPM PSI GPM PSI Voltage Phase
3 CLP03VNASA1 Compact Low Profile 3HP VFD Pump Station 200V,1P 3P 40 50 95 20 200VAC Single or Three
3 CLP03VNASB3 Compact Low Profile 3HP VFD Pump Station 480V,3P 40 50 95 20 480VAC Three Phase
5 CLP05VAASC1 Compact Low Profile 5HP VFD Pump Station 200V,1P 3P 30 72 85 44 200VAC Single or Three
5 CLP05VAASD3 Compact Low Profile 5HP VFD Pump Station 480V,3P 30 72 85 44 480VAC Three Phase
5 CLP05VBASC1 Compact Low Profile 5HP VFD Pump Station 200V,1P 3P 50 53 160 31 200VAC Single or Three
5 CLP05VBASD3 Compact Low Profile 5HP VFD Pump Station 480V,3P 50 53 160 31 480VAC Three Phase
5 CLP05VCASC1 Compact Low Profile 5HP VFD Pump Station 200V,1P 3P 80 36 220 21 200VAC Single or Three
5 CLP05VCASD3 Compact Low Profile 5HP VFD Pump Station 480V,3P 80 36 220 21 480VAC Three Phase
5 CLP05VHASC1 Compact Low Profile 5HP VFD Pump Station 200V,1P 3P 50 60 140 30 200VAC Single or Three
7.5 CLP07VDASE1 Compact Low Profile 7.5HP VFD Pump Station 200V,1P 3P 40 99 95 68 200VAC Single or Three
7.5 CLP07VDASG3 Compact Low Profile 7.5HP VFD Pump Station 480V,3P 40 99 95 68 480VAC Three Phase
7.5 CLP07VEASE1 Compact Low Profile 7.5HP VFD Pump Station 200V,1P 3P 60 66 180 42 200VAC Single or Three
7.5 CLP07VEASG3 Compact Low Profile 7.5HP VFD Pump Station 480V,3P 60 66 180 42 480VAC Three Phase
7.5 CLP07VFASE1 Compact Low Profile 7.5HP VFD Pump Station 200V,1P 3P 100 46 240 29 200VAC Single or Three
7.5 CLP07VFASG3 Compact Low Profile 7.5HP VFD Pump Station 480V,3P 100 46 240 29 480VAC Three Phase
10 CLP10VGASH1 Compact Low Profile 10HP VFD Pump Station 200V,1P 3P 80 82 200 55 200VAC Single or Three
10 CLP10VGASI3 Compact Low Profile 10HP VFD Pump Station480V,3P 80 82 200 55 480VAC Three Phase
10 CLP10VIASH1 Compact Low Profile 10HP VFD Pump Station 200V,1P 3P 110 61 260 46 200VAC Single or Three
10 CLP10VIASI3 Compact Low Profile 10HP VFD Pump Station 480V,3P 110 61 260 46 480VAC Three Phase

How To Specify
q Click the icons below for more information CLP 03 V N AS A1
Design & Technical Resources
Motor Pump Curve Voltage
HP: 03 N A1: 200VAC single
or three phase
B3: 480VAC three
Drawings WRITTEN SPECS TECH SPECS RESOURCES phase

www.rainbird.com 11
 Central Control
Nonand Controllers
Potable Water Irrigation System | Design Guide

12 www.rainbird.com
Non Potable Water Irrigation System | Design Guide

Central Control and Controllers

With features like ET-based scheduling, flow management,

and Cycle+Soak™, Rain Bird central control products help you
eliminate overwatering and runoff that are undesirable in
recycled water areas. When local water authorities require
water use reporting, these systems allow you to report by
water type to save you time and effort.

Central Control Product Lines for Non potable Systems

• IQ™ Platform
• ESP-LXMEF
• ESP-LXD

Case Study
City of West Torrens, South Australia
PROJECT OVERVIEW:
The City of West Torrens Council manages more than 42 hectares of irrigated
public open space. The council is faced with expensive water (AUD$3.24 per
kilolitre), thus using water efficiently is a high priority. In addition, resources
required to manage the irrigation systems must be used wisely. With IQ-
Cloud, the council could eliminate the need to have software hosted on
their own servers and would gain remote access to the irrigation systems
from anywhere using iPad minis.
Rain Bird’s Global Weather service was also implemented to provide Internet-based weather data to IQ-Cloud. The weather data
is used for ET-based scheduling on 95 percent of sites. IQ-Cloud automatically adjusts the irrigation schedules based on the
landscape’s evapotranspiration rate. The data helped reduce water usage during the most recent season, which was wetter and
cooler than average. The council saved approximately AUD$48,000 in water costs during the first season that fully utilized all of the
IQ-Cloud features, or approximately half the amount invested to upgrade to IQ-Cloud.

Credit category of LEED for the Integrative Process (IP)= I point for the implementation stage when demonstrating
at least one On-Site non potable water supply source was analyzed for at least two of the water demand elements
including landscape irrigation and Site elements.

www.rainbird.com 13
 Non Potable Water Irrigation System | Design Guide

The New Rain Bird®

IQ™ Platform
The ultimate tool for remote water management.
With the new IQ-Cloud v. 3.0, you can control your
irrigation system from any device, anywhere. With set
up that takes less than five minutes, multi-user access
and no recurring annual fees, you finally have the
option you’ve been waiting for.

Features Available on the IQ Platform

• Manage irrigation schedules based on weather
conditions
• Automate e-mail alerts and alarms to manage
IQ v3.0 Software
exceptions
• Know which zones are operating and where,
down to the minute
• Create and share reports on total water usage Choose IQ-Cloud if you manage
• Restrict access to the satellite controllers with HOAs, schools, parks, municipal sites,
pin code or other properties, and want mobile
• Monitor system performance and identify access to the irrigation systems from
problems with Flow Watch™ your tablet or smartphone, and
• Remote diagnostics for two-wire systems IQ v3.0 Cloud would like to share access with other
people on your team.
• To ensure customer’s systems are compatible
with future technologies and feature
IQ-Enterprise lets you implement
enhancements, hardware upgrades will be
IQ-Cloud on a private server when
required every 5 years
you need to comply with strict IT
protocols. IQ-Enterprise is perfect for
How To Specify managing hospitals, universities and
government or military properties.
IQ v3.0 Software
IQ v3.0 Enterprise You can use your organization’s
IQADVCEDCD: 5-Satellite Capacity with
wireless network to reduce or
advanced feature packs
included
eliminate cellular data fees.
IQ5SATSWU: Software 5-Satellite
Capacity Upgrade
Choose IQ-Desktop when you only
need to access the irrigation systems
you manage from your computer
q Click the icons below for more information and don’t need mobile access. If
Design & Technical Resources you are a grower or farmer and the
IQ v3.0 Desktop
operation of your irrigation system is
centralized, IQ-Desktop might be the
Drawings WRITTEN SPECS TECH SPECS RESOURCES
right option for you.

14 www.rainbird.com
Non Potable Water Irrigation System | Design Guide

Rain Bird® ESP-LX Series

Controllers
Controllers combine modularity with advanced
water management and Extra Simple Programming
The ESP-LXME Enhanced Controller offers flow sensing
and management with modular station capacity from 8
to 48 stations. Station modules are available in 4-, 8- and
12-station models.

Water Management Features

• Optional Flow Smart Module™ with Learn Flow ESP-LXME Controller

utility and flow usage totalizer — standard on

ESP-LXMEF • Water Windows by program plus
• FloWatch™ protection for high and low flow Manual MV Water Window
conditions with user defined reactions • Cycle+Soak™ by station
(requires flow sensor) • Rain Delay
• FloManager™ manages hydraulic • 365-Day Calendar Day Off
demand, making full use of available • Programmable Station Delay by program
water to shorten total watering time
• Normally Open or Closed Master Valve
• SimulStations™ are programmable to allow up programmable by station
to 5 stations to operate at the same time
• Weather Sensor programmable by station
• Station sequencing by station to prevent or pause watering
numbers or station priorities
• Program Seasonal Adjust
• Global Monthly Seasonal Adjust
Model Description
ESP8LXME 8-Station Controller, 120VAC
ESP12LXMEF 12-Station Controller with Flow Smart Module, 120VAC
IESP8LXME 8-Station Controller for International Market, 230VAC
FSMLXME Flow Smart Module for ESPLXME/F Controller
How To Specify
ESPLXMSM8 8-Station Module for ESP-LXME/F Controller ESP-LXME ESPLXMSM4
ESPLXMSM12 12-Station Module for ESP-LXME/F Controller Base Controller without Station Modules
Flow Smart Module ESPLXMSM4:
ESPLXMEFP ESPLXME Controller Front Panel Only ESP-8LXME: 4-Station Module
8-station base ESPLXMSM8:
8-Station Module
ESPLXMSM12:
q Click the icons below for more information 12-Station Module

Design & Technical Resources Base Controller with

Flow Smart Module
FSM-LXME
ESP-12LXMEF:
12-station base Flow Smart Modules
FSM-LXME Flow Smart
Drawings WRITTEN SPECS TECH SPECS RESOURCES Module

www.rainbird.com 15
 Non Potable Water Irrigation System | Design Guide

ESP-LXD Series Two-Wire

Decoder Controller
The ESP-LXD controller has been designed to
maintain the look, feel and ease of programming
of the ESP-LXM controller but with an interface to
a two-wire path for decoder-based irrigation.

Advanced Features
From Cycle+Soak™ to Contractor Default
Program™, the ESP-LXD offers innovative ESP-LXD Decoder
features proven to cut installation expenses, Controller
troubleshooting time and water use.

Unprecedented Flexibility Built-In Flow Management

A modular design makes the ESP-LXD the perfect FloManager® ensures you don’t overtax your water supply,
fit for a range of large residential and commercial while Flo-Watch™ quickly identifies and isolates high or low
projects—from the straightforward to the most flow situations, such as mainline breaks.
complex.
Smart Approved Watermark
200-Station Capacity
Rain Bird’s ESP- LXD controller has received the Smart
The ESP-LXD offers the ability to expand from Approved Watermark. Established in Australia and
50 stations to up to 200 stations. So you can recognized worldwide, this elite designation identifies
handle sites large or small, while stocking fewer products and services that help reduce water use.
controllers and components.

Model Description How To Specify

ESP-LXD 50-station, 120 VAC
Controller
IESPLXD 50-station for international markets, 230 VAC ESP-LXD
IESPLXDEU 50-station for Europe, 230 VAC Models
ESP-LXD: 120v Outdoor
IESPLXDAU 50-station for Australia, 240 VAC IESP-LXD: 230v Intl
IESPLXDEU: 230V (EU)
IESP-LXDA: 240V (AUS)
q Click the icons below for more information
Modules & Cartridges
Design & Technical Resources ESPLXD-SM75
Models
75-station module
Drawings WRITTEN SPECS TECH SPECS RESOURCES PBC-LXD: Program
Backup Cartridge

16 www.rainbird.com
 Valves
Non Potable Water Irrigation System | Design Guide

www.rainbird.com 17
 Non Potable Water Irrigation System | Design Guide

Valves

Constructed from heavy-duty, glass-filled nylon and designed

with chlorine- and chemical-resistant diaphragms and
components, these Rain Bird valves will perform effectively
year after year. Valve boxes with purple lids ensure everyone is
aware of recycled water use.

Valve Product Lines for Non potable Systems

• PESB-R Series Valves • Purple Valve Boxes and Lids
• EFB-CP Series Valves • Purple Valve Handle Assembly
• Quick-Coupling Valves • Drip Control Zone kits

Case Study
Mountain Equipment Co-op - Burlington, Ontario
PROJECT OVERVIEW:
Mountain Equipment Co-op (MEC) is a leading supplier of outdoor gear,
clothing and camping equipment. In designing an irrigation system for the
company’s Burlington, Ontario site, an extensive project team was charged
with reducing potable landscape water use by 100 percent, thus fulfilling
LEED® credits for water efficiency. Featuring two cisterns, the recommended
system design would capture and reuse rainfall for landscape irrigation, as
well as toilet flushing.
RESULTS:
By combining weather-based control with rainwater recycling, the site has raised its annual water savings to 100 percent or
1,014,554 litres, the equivalent of nearly $2,000. In addition to saving water and money, ET Manager™ has saved the site’s
maintenance staff time by minimizing the need for manual adjustments to the watering schedule.

Credit category of LEED for the Integrative Process (IP)= I point for the implementation stage when demonstrating
at least one On-Site non potable water supply source was analyzed for at least two of the water demand elements
including landscape irrigation and Site elements.

18 www.rainbird.com
Non Potable Water Irrigation System | Design Guide

PESB-R Series Valves

Durable chlorine-resistant valves for recycled
water irrigation applications
150-PESB-R
A true recycled water irrigation valve, able to
handle chlorine and other chemicals found in
recycled water systems. PESB-R Series valves
offer long life and efficient, trouble-free
performance – even in harsh recycled water
applications. Constructed of heavy-duty, glass-filled
nylon, these valves resist clogging and feature a
patented scrubber to actively fight dirt, algae and
other particles from blocking the pilot flow.

Advanced Features Specifications

• Stronger, glass-filled nylon bonnet • Pressure: 20 to 200 psi (1.38 to 13.80 bar)
• Enhanced diaphragm materials • Flow: 0.25 to 200 gpm (0.06 to 45.40 m3⁄h; 0,02 to
• Robust, one-piece solenoid 12,60 l/s)
• Stainless steel studs molded into the body • Flow with PRS-Dial: 5 to 200 gpm
(1.14 to 45.40 m3⁄h; 0,32 to 12,60 l/s)
• External bleed
• Temperature: Up to 150° F (66° C)
• Slow-closing operation
• 24VAC 50/60Hz (cycles/sec) solenoid power
• Self-cleaning pilot filter scrubber
requirement
• Chlorine-resistant materials
• Inrush current: 0.41A (9.9VA) at 60Hz
• Holding current: 0.14A (3.43VA) at 60Hz
• Solenoid coil resistance: 30-39 Ohms, nominal

Model Description Height Length Width How To Specify

100-PESB-R 1" (26/34) 61⁄2" (16.5 cm) 4" (10.2 cm) 4" (10.2 cm)
100 - PESBR - PRS-D
150-PESB-R 11⁄2" (40/49) 8" (20.3 cm) 6" (15.2 cm) 6" (15.2 cm)
Size
200-PESB-R 2" (50/60) 8" (20.3 cm) 6" (15.2 cm) 6" (15.2 cm) 100: 1" (26/34)
150: 1½" (40/49)
200: 2" (50/60) Model
PESB-R:
scrubber
q Click the icons below for more information model Optional Feature
PRS-Dial: pressure
regulating module
Design & Technical Resources (must be ordered
separately)

Note: Valve and PRS-Dial module must be ordered separately.

For non-U.S. applications, it is necessary to specify NPT or BSP thread type.
Drawings WRITTEN SPECS TECH SPECS RESOURCES

www.rainbird.com 19
 Non Potable Water Irrigation System | Design Guide

EFB-CP Series Brass Valves

Electric remote control valves don't come any better than
EFB-CP Series red brass valves. Need a contamination-
proof, self-flushing screen that cleans itself and resists
debris build-up in dirty water? The EFB-CP's the one!

Ideal for non-potable water valve applications, the

EFB-CP is designed to handle chlorine and other harsh
chemicals found in recycled water systems.

EFB-CP Series valves offer long life and superior

performance in high pressure applications.

Features
150-EFB-CP
• Red brass body and bonnet for longer life and more
rugged performance at 200 psi (13,80 bar)
Specifications
• Reverse flow feature ensures valves fail in the closed
position if the diaphragm tears or rips. Prevents • Pressure: 15 to 200 psi (1,04 to 13,80 bar)
flooding, water waste and landscape damage • Flow with/without PRS-D: 5 to 200 GPM
• One-piece solenoid design with captured plunger (1.14 to 45,40 m3/h; 0,32 to 12,60 l/s)
and spring for easy servicing • Temperature: up to 150° F (66° C)
• Prevents loss of parts during field service • •24VAC 50/60Hz (cycles/sec) solenoid power
• Low-power requirement allows for longer requirement
wire runs without increased wire gauge • Inrush current: 0.41A (9.9VA) at 60Hz
• Manual internal and external bleed • Holding current: 0.14A (3.43VA) at 60Hz
• Adjustable flow control • Solenoid coil resistance: 30-39 Ohms, nominal

Model Description Height Length Width How To Specify

100-EFB-CP 1" (26/34)* 6" (15.2 cm) 41⁄2" (11.4 cm) 31⁄4" (8.3 cm)
100 - PESBR - PRS-D
150-EFB-CP 11⁄2" (40/49)* 61⁄2" (16.5 cm) 51⁄2" (14 cm) 41⁄2" (11.4 cm)
Size
200-EFB-CP 2" (50/60)* 7" (17.8 cm) 63⁄4" (17.1 cm) 53⁄4" (14.6 cm) 100: 1" (26/34)
150: 1½" (40/49)
200: 2" (50/60)
Model
PESB-R:
q Click the icons below for more information scrubber Optional Feature
model PRS-Dial: pressure
regulating module
Design & Technical Resources (must be ordered
separately)

Note: Valve and PRS-Dial module must be ordered separately.

Drawings WRITTEN SPECS TECH SPECS RESOURCES For non-U.S. applications, it is necessary to specify NPT or BSP thread type.

20 www.rainbird.com
Non Potable Water Irrigation System | Design Guide

Wide Flow Commercial

Control Zone Kit with
Scrubber Valve & Pressure
Regulating, Basket Filter
Features
• Rain Bird Control Zone Kits provide all of the
components necessary for on/off control,
filtration, and pressure regulation in a single
package, making them simple to order and easy
to install
• Complete kit is the simplest, smallest and
most reliable Control Zone Kit for commercial
applications between 3 and 20 gpm (11 and
76 l/m) XCZ-100-PRBR

• Includes the reliable, proven PESB-R Valve which

provides patented scrubbing action, making this
kit ideal for commercial dirty water applications
• Includes the Pressure Regulating, Basket Filter.
In addition, the threaded top makes it easy to
remove and clean the stainless steel screen

Operating Range
• Flow: 0.3 to 20.0 gpm (1.13 to 75.7 l/m)*
• Inlet Pressure: 15 to 150 psi (1,0 to 10,3 bar)
• Regulating Pressure: 40 psi (2,7 bar)
• Filtration: 200 mesh (75 micron) stainless steel
• Temperature: Up to 150º F (66º C)

Model Description How To Specify

XCZ-100-PRBR 1” PESBR Valve and 1” Pressure Regulating (40psi) Basket Filter
XCZ - 100 - PRBR

q Click the icons below for more information

Model Options
Design & Technical Resources XCZ Scrubber Valve & Pressure
Regulating, Basket Filter

Inlet
1”
Drawings WRITTEN SPECS TECH SPECS RESOURCES

www.rainbird.com 21
 Non Potable Water Irrigation System | Design Guide

1.5" Inline Commercial Control

Zone Kit
Run Up to 62 gpm for Large Zones
• High Flow Range: Allows for larger drip zone 2-Wire le
tib
coverage with one control zone kit, saving labor Compa
cost, material cost and installation hassle.
• Low Friction Loss: Allows usage in zones with
lower head pressure.
• Fully Assembled: Saves installation labor cost
by ensuring all key components are included
and that the direction of flow in individual
components is assembled properly. XCZ-150-LCDR

• Inline Configuration: Fewer connection points,

which fits two kits instead of just one in a
jumbo valve box. Also provides more access for
maintenance and components.

Valve Type Operating Range

• XCZ-150-LCDR: 1.5" PESB-R • Flow Range: 15 to 62 gpm (56.8 l/min to 234.69 l/min)

• Power: 24 VAC 50/60 Hz (cycles/sec) solenoid • Inlet Pressure: 15 to 115 psi (1.03 to 7.9 bar)

• Inrush Current: 0.41A (9.84 VA) at 60Hz • Regulated Pressure: 40 psi (2.8 bar)

• Holding Current: 0.14A (3.43VA) at 60Hz • Filtration: 120 mesh (130 micron)

• Coil Resistance: 30-39 Ohms • Water Temperature: 33° F up to 110° F (0.5° C to 43° C)

• Two-wire compatible with ESP-LXD Decoders • Ambient Temperature: 33° F up to 125° F (0.5° C to 52° C)

Model Description How To Specify

1.5 in. Inline Commercial Control Zone Kit - 40 psi, disc
XCZ-150-LCDR
filter, scrubber valve XCZ - 150 - LCDR

Model
XCZ
q Click the icons below for more information
Inlet
Design & Technical Resources 1.5”

Filter
LCDR: Disc filter for
reclaimed water
Drawings WRITTEN SPECS TECH SPECS RESOURCES

22 www.rainbird.com
Non Potable Water Irrigation System | Design Guide

Quick Coupling Valves Brass

Irrigation Valves
Industrial-strength brass quick-coupling valves
for convenient water access in potable and non-
potable systems.

Features
• Rugged, red brass construction for long life and
reliable performance.
• Reliable operation with strong corrosion-
resistant stainless steel spring
33-DNP, 44-NP,
• 33-DNP, 44-NP, 44-NP ACME, and 5-NP covers 44-NP ACME
marked with “Do Not Drink!” warnings in
English and Spanish

Specifications Dimensions (height)

• Pressure: 5 to 125 psi (0.35 to 8.63 bar) • 33-DNP: 43⁄8” (11.1 cm)
• Flow: 10 to 125 gpm (2.27 to 28.38 m /h; 3
• 44-NP: 6” (15.2 cm)
37.8 to 473 l/m) • 44-NP ACME: 6” (15.2 cm)
• 33-DNP, 44-NP and 5-NP flow: 10 to 70 gpm • 5-NP: 51⁄2” (14.0 cm)
(2.27 to 15.89 m3/h; 37.8 to 265 l/m)

Model Description How To Specify

33-DNP 3⁄4” (20/27) Non-potable, Purple Locking Rubber Cover, 2-Piece Body 44 - NP - ACME
44-NP 1” (26/34) Non-potable, Purple Locking Rubber Cover, 2-Piece Body Model
33
44
1” (26/34) Non-potable, Purple Locking Rubber Cover, 2-Piece Body,
44-NP ACME 5
ACME thread Cover
DNP
NP
5-NP 1” (26/34) Non-potable, Purple Locking Rubber Cover, 1-Piece Body

Note: For non-US applications, it is necessary to specify NPT or BSP thread type Thread
Blank: NPT
ACME: 44-NP only

q Click the icons below for more information

Design & Technical Resources
Note: This specifies a 44-NP-ACME valve: 1” (26/34)
Non-potable, Purple Locking Rubber Cover, 2-Piece
Body, ACME thread
Drawings WRITTEN SPECS TECH SPECS RESOURCES

www.rainbird.com 23
 Non Potable Water Irrigation System | Design Guide

Purple Valve Boxes and Lids

Rain Bird® PVB Professional series offers rugged, no-
nonsense dependability, but with a price tag that
can meet any budget. Coupled with the Rain Bird®
VB Specification series, you have a full range of
reliable valve boxes that deliver strength and value
to any project.

Features
• Lid can be removed by inserting a finger or
screwdriver at access slots.
• Lid marking area makes it easy to label the
valve box.
• Beveled lid edges help prevent damage to lids
from lawn equipment.
• Snap-in overlapping lid Skid-resistant texture
Purple Valve Boxes
and Lids

Model Description How To Specify

PVB Professional Series Non-Potable Valve Boxes
PVBSTD - P
PVB6RNDP 6" round black body & overlapping purple lid
PVB10RNDP 10" round purple body & overlapping purple lid Options
P = Purple body & lid
PVBSTDP 12" standard purple body & drop-in purple lid
Model
PVB Professional Series
PVBJMBP 12" purple body & drop-in purple lid Standard Valve Box

PVBJMBEXTP 6" purple body & overlapping purple lid

Note: Note: 6" and MST models are black bodies only.
VB Series Non Potable Valve Box Lids
VB-STD-PL Standard (Purple Lid Only)
How To Specify
VB-JMB-PL Jumbo (Purple Lid Only)
VB-10RND-PL 10" Round (Purple Lid Only) VB - 10RND - PL
VB-7RNDPL 7" Round (Purple Lid Only) Lid
PL = Purple lid
Model
10RND: 10” Round
q Click the icons below for more information 7RNDPL: 7” Round
STD: Standard
VB: JMB Jumbo
Design & Technical Resources
Model
VB Series Non Potable
Valve Box Lids

Drawings WRITTEN SPECS TECH SPECS PVB RESOURCES VB RESOURCES Note: Note: 6" and MST models are black bodies only.

24 www.rainbird.com
Non Potable Water Irrigation System | Design Guide

Purple Valve Handle Assemblys

For retrofit applications on existing valves that do not
PEB-NP-HAN
have purple markings designating use of recycled
water, Rain Bird offers purple retrofit valve handle
assemblies for PGA, PESB and BPE valves.

Features
• Purple flow control handle identifies valve as
part of a non-potable system
• Easily field installed
• Sizes for all Rain Bird Commercial Valves

PGA-NP-HAN

BPES-NP-HAN

Model Description How To Specify

PGA-NP-HAN1 Purple Handle (Fits 1" and 1 1/2" PGA Valves)
PGA - NP - HAN1
PGA-NP-HAN2 Purple Handle (Fits 2" PGA Valves)
Handle
PEB-NP-HAN1 Purple Handle (1" PEB/PESB Valves) 1: 1“
2: 2”
PEB-NP-HAN2 Purple Handle (1 1/2" and 2" PEB/PESB Valves)
BPE-NP-HAN Purple Handle (3" BPE/BPES Valves) Options
NP: Non-potable

q Click the icons below for more information Valve Models

PGA Valves
Design & Technical Resources PEB/PESB Valves

Drawings WRITTEN SPECS TECH SPECS RESOURCES

www.rainbird.com 25
 Emission Devices
Non Potable Water Irrigation System | Design Guide

26 www.rainbird.com
Non Potable Water Irrigation System | Design Guide

Emission Devices

Designed to handle the challenges of recycled water use,

these Emission Devices are built to last. Some feature
special internal components that filter debris from your
system, while others can easily withstand chlorine and other
chemicals that reduce a regular spray's lifespan. Visible
purple indicators ensure everyone knows recycled water is
being used.

Emission Devices Product Lines for Non potable Systems

ROTORS SPRAYS DRIP
• 3500 Series Rotors • RD1800™ Series Spray Heads • XFD Purple Dripline
• 5000 Series Rotors • PA-8S-NP Shrub Adapter • Drip Compression Fittings
• Falcon® 6504 Series Rotors • XBS - Black Stripe Tubing
• Rain Bird® 8005 Rotors
• 2045A Maxi-Paw™

Case Study
LEGOLAND, Carlsbad, CA
PROJECT OVERVIEW:
At LEGOLAND®, a family theme park in California, 90% of the landscaping is irrigated
using recycled water from the City of Carlsbad.In early 2011, Rain Bird asked Chris
Bruchez, Landscaping Supervisor at the park, to field test a new spray head, the
RD1800™, which is constructed of material designed to withstand the harsh chemicals
used in recycled water. Mr. Bruchez was eager to try out the new spray head since he
had success with another recycled product, the PESB-R valve, which uses the same
material in its diaphragm.
Results
Mr. Bruchez installed more than 200 sprays in a couple of zones for the field test. Since early 2011, he has not replaced an RD1800 due
to components breaking down because of the chemically treated recycled water saving him replacement cost and maintenance time.
“I really liked the way the spray has performed during this (field test) time,” Bruchez said, “Now it’s just a matter of replacing 10,000
more sprays with RD1800s.”

Credit category of LEED for the Integrative Process (IP)= I point for the implementation stage when demonstrating
at least one On-Site non potable water supply source was analyzed for at least two of the water demand elements
including landscape irrigation and Site elements.

www.rainbird.com 27
 Non Potable Water Irrigation System | Design Guide

3500 Series Rotors 0.37 to 0.83 in/hr

Compact Residential Rotor. Big on Value (9 to 21 mm/h)

and Convenience
25 to 55 psi
(1.7 to 3.8 bar)
The 3500 Series Rotor is an easy to use short to
mid-range 1⁄2” gear-drive rotor, offering value and 0.54 to 4.6 gpm
convenience for smaller turf areas and densely (2.0 to 17.4 l/m)
(0.12 to 1.04 m3/h)
planted landscapes. Utilizing a simple flat-bladed
screwdriver, the 3500’s arc adjustment is quick 4" (10.2 cm)
and easy. Shrub: 7" (17.8 cm)
4": 6 5/8" (16.8 cm)
Features ½” (20/27) NPT

• Rain Curtain™ nozzles deliver even

distribution over the entire radius including
large wind resistant droplets and gentle
close-in watering resulting in greener turf
using less water
• Oversized wiper seal prevents leaks and
protects internals from debris
• Arc adjustment through the top of the rotor
requiring only a flatblade screwdriver
• 3 year trade warranty

3504-PC

Model Description How To Specify

3504-PC-SAM-NP 4" part/reverse full circle with SAM and NP cover
3504 - PC - SAM - NP
Options
NP = Non-potable
cover
q Click the icons below for more information Options
S = SAM
Design & Technical Resources
Rotation
Part Circle / Reversing Full Circle

Model
Drawings WRITTEN SPECS TECH SPECS RESOURCES 3500 Series 4" pop-up

28 www.rainbird.com
Non Potable Water Irrigation System | Design Guide

5000 Series Rotors 0.20 to 1.01 in/hr

(5 to 26 mm/h)
Engineered to deliver a uniform spray pattern,
giving you superior distribution uniformity and a 25 to 65 psi
consistently green lawn with less water. (1.7 to 4.5 bar)

0.76 to 9.63 gpm

Features (3.0 to 36.6 l/m)
(0.17 to 2.19 m3/h)
• Rain Curtain™ Large water droplets and
gentle close-in watering ensure efficient Shrub: 4" (10.2 cm)
coverage and green grass 6" (15.2 cm)
12" (30.5 cm)
• Durable, oversized Leak-Free Seal prevents
Shrub: 7 3/4" (19.7cm)
puddling and guarantees consistent pop-up 4": 7 3/8" (18.5 cm)
and retraction for years 6": 9 5/8" (24.5 cm)
12": 16 7/8" (42.9 cm)
• Heavy-duty retract spring and cover 3/4" (20/27) NPT
assembly for extra durability in residential or
commercial applications
• Self-flushing arc adjustment port that 5000 Series
prevents buildup of debris
• Pressure-activated triple-blade multi-function
wiper seal protects internals from debris and
assures positive pop-up and retraction

Model Description How To Specify

5000+SPCSAMNP 5000S Shrub Plus Part Circle SAM Non Potable
5004 - + - S - PC - SAM -R - NP
5000S+PCSR 5000S Plus Shrub PRS PC SAM NP
5004PCNP 5004 Part Circle Non Potable Options
SAM
R: PRS
5004+PCSAMRNP 5004 Plus Part Circle SAM PRS Non Potable NP: Non-potable cover

5004+PCSAMRNS 5004 Plus Part Circle SAM PRS Stainless Steel Non Potable
Rotation
5006+PCSAMNP 5006 Plus Part Circle SAM Non Potable “PC” for 40°–360°
“FC” for 360°
5006+PCSAMRNP 5006 Plus Part Circle SAM PRS Non Potable
5006+PCSAMRNS 5006 Plus Part Circle SAM PRS Stainless Steel Non Potable
Model
Shrub
5012+PCSAMRNP 5012 Plus Part Circle SAM PRS Non Potable
5000S+PCSR 5000S PLUS SHRUB PRS PC SAM NP
Model
Plus (+)

q Click the icons below for more information

Model
Design & Technical Resources 5004: 4" pop-up
5006: 6" pop-up
5012: 12" pop-up

Drawings WRITTEN SPECS TECH SPECS RESOURCES Note: Certain specifications not available for some rotor series.

www.rainbird.com 29
 Non Potable Water Irrigation System | Design Guide

Falcon® 6504 Series 0.37 to 1.14 in/hr

Reliable and Economical (9 to 29 mm/h)

The Falcon 6504 one of the toughest rotors 30 to 90 psi

(2.1 to 6.2 bar)
in the field. Ideal for large turf sites such as
parks, athletic fields, cemeteries, schools and 2.9 to 21.7 gpm
commercial applications. (10.8 to 82.2 l/m)
(0.66 to 4.93 m3/h)
Features
4" (10.2 cm)
• Ratcheting stem just like standard spray
8½" (21.6 cm)
bodies
1" (26/34) NPT
• 3-port, color-coded Rain Curtain nozzles for or BSP
optimal long range,mid-range, and close-in
watering
• SAM Seal-A-Matic check valve
• Self-adjusting stator does not require
replacement when changing nozzles
• Heavy-duty, stainless steel retract spring
ensures positive popdown
• 5 year warranty
Falcon® 6504 Series

Model Description How To Specify

6504-FC-NP Full-circle, non-potable cover
6504 - PC - SS - NP
6504-PC-NP Part-circle, non-potable cover
Options
6504-FC-SS-NP Full-circle, stainless steel, non-potable cover NP = Non-potable
cover
6504-PC-SS-NP Part-circle, stainless steel, non-potable cover
Options
Note: All models available with BSP threads Stainless Steel Riser

Rotation
PC: Part-circle
q Click the icons below for more information FC: Full-circle

Design & Technical Resources Model

6504: Falcon

Note: Certain specifications not available for some rotor series.

Drawings WRITTEN SPECS TECH SPECS RESOURCES

30 www.rainbird.com
Non Potable Water Irrigation System | Design Guide

8005 Series Rotors 0.48 to 1.23 in/hr

Protect Your Turf with High Performance, Vandal (12 to 31 mm/h)

and Abuse Resistant Rotors from 39’ to 81’ 50 to 100 psi

The Rain Bird® 8005 Rotor, with its extensive (3.5 to 6.9 bar)

customer identified features and 80 foot radius, is

3.8 to 36.3 gpm
ideal for watering sportsfields, parks and other large (14.4 to 137.4 l/m)
turf applications. (0.86 to 8.24 m3/h)

5" (12.7 cm)

Features
101/8" (25.7 cm)
• Vandal resistance, brass reinforced turret for
increased side impact durability 1" (26/34) NPT
or BSP
• Memory Arc® returns the rotor to its original arc
setting
• Non-strippable drive mechanism prevents
damage from vandals
• Easy, wet, dry arc adjustment with slotted
screwdriver through top of rotor from 50° to
330° part-circle, 360° non-reversing full-circle.
• Full and part circle operation in one unit 8005 Series
• Left and right side trips adjustable for ease
of installation without turning the case and
loosening the pipe connection
• SAM Seal-A-Matic check valve
• 3-port, color-coded Rain Curtain nozzles for
optimal long-range, mid-range, and close-in
watering
• 5 year warranty

Model Description How To Specify

1” NPT female threaded inlet (5” stainless steel covered riser
8005-SS-NP
stem with non-potable cover) 8005 - SS - NP - 16
Nozzle Size
1” NPT female threaded inlet (plastic riser stem with 16
8005-NP
nonpotable cover)
Options
Non-potable
rubber cover

Options
q Click the icons below for more information Stainless steel riser

Design & Technical Resources Model

8005 Series

Note: For non-U.S. applications, it is necessary to specify NPT or

BSP thread type.
Drawings WRITTEN SPECS TECH SPECS RESOURCES

www.rainbird.com 31
 Non Potable Water Irrigation System | Design Guide

2045A Maxi-Paw™ 0.28 to 1.21 in/hr

The Maxi-Paw’s powerful throw permits maximum (7 to 31 mm/h)

spacing and offers superior close-in watering and 25 to 60 psi

uniform water distribution. Low pressure loss and (1.7 to 4.1 bar)
an efficient, straight-through flow design conserve
energy and are ideal for dirty water applications. 1.5 to 8.4 gpm
(0.9 to 0.53 l/s)
(0.34 to 1.91 m3/h)
Features
3” (7.6 cm)
• Proven impact drive with straight-through flow
for superior performance in dirty water 9 3/10” (23.6 cm)

• Five standard trajectory and two low angle (LA) ½” or ¾” FPT or BSP
bottom inlet; ½” FPT or
color-coded nozzles for matched precipitation BSP side inlet
and in a wide range of Applications
• 360° full-circle OR arc adjustable from 20° to 340°
• Side and combination ½” or ¾” bottom inlet for
design flexibility
• 3 year warranty

2045A Maxi-Paw

Model Description How To Specify

Part/Full Circle Maxi-Paw with with SAM and
2045ASAMNP
non-potable cover 2045A - SAM - NP

2045ANP Part/Full Circle Maxi-Paw with non-potable

cover
Options
Non-potable
rubber cover
q Click the icons below for more information
Options
Design & Technical Resources SAM

Model
2045A
Maxi-Paw

Drawings WRITTEN SPECS TECH SPECS RESOURCES

32 www.rainbird.com
Non Potable Water Irrigation System | Design Guide

RD1800™ Series Spray Heads

The RD1800 Series has been built to withstand harsh
operating conditions such as chemically treated recycled
water (reclaimed / nonpotable), dirty water containing
grit, debris, and other particulates, and high operating
pressures common in commercial irrigation systems.

Features
• Exclusive comolded, pressure activated
Triple-Blade Wiper
• Seal to assure a positive seal without excess “flow-
by”, which enables more heads to be installed on the
same valve.
• Precision-controlled flushing at pop-up and Non-Potable Cover

retraction clears debris, assuring positive stem

retraction in all soil types.
• Debris pockets in the base of the spray body prevent
recirculation of harmful debris during operation to
reduce wear on the wiper seal and stem.
RD1800 Series
• Designed for use with all Rain Bird nozzles – Rotary
Nozzles, U-Series, MPR, VAN, HE-VAN, and SQ Series.
• Parts developed to be resistant to corrosion in
treated recycled water containing chlorine and other
chemicals.

Model How To Specify

4” 6” 12"
RD-XX - X - Nozzle
RD04 – –
Nozzle
RD04-NP – – See Rotary Nozzle, U-Series,
MPR, VAN, HE-VAN and
RD04-S-P-30-NP RD06-S-P-30-NP RD12-S-P-30-NP SQ Nozzle specifications
for more information
RD04-S-P-30-F-NP RD06-S-P-30-F-NP RD12-S-P-30-F-NP
Options
RD04-S-P-45-NP RD06-S-P-45-NP RD12-S-P-45-NP S: Seal-A-Matic™ check valve
P30: 30 psi (2.1 bar) in-stem pressure regulation
RD04-S-P-45-F-NP RD06-S-P-45-F-NP RD12-S-P-45-F-NP P45: 45 psi (3.1 bar) in-stem pressure regulation
F: Flow-Shield™ Technology
NP: Non-potable water use indicating cover

q Click the icons below for more information Model

RD-04: 4” (10 cm) pop-up height
Design & Technical Resources RD-06: 6” (15 cm) pop-up height
RD-12: 12” (40 cm) pop-up height

Note: Flow-Shield™ Technology available in P30 and P45 models

only. Specify sprinkler bodies and nozzles separately.
Drawings WRITTEN SPECS TECH SPECS RESOURCES

www.rainbird.com 33
 Non Potable Water Irrigation System | Design Guide

PA-8S-NP Shrub Adapter

Adapts Rain Bird nozzles for use with 1/2” (15/21)
MPT threaded risers

Features PA-8S-NP
• Accepts protective, non-clogging 1800 Series filter
screen (shipped with nozzle) and PCS Series screens.
• Durable, non-corrosive plastic construction.
• Purple plastic shrub adapter for easy identification of
a non-potable water system (PA-8S-NP).

Model Description
PA-8S-NP Purple Plastic Shrub Adapter

1800 NP Cover
Non-Potable 1800 Spray Head Cover

Features
• Designed for excellent retention on 1800 Series
1800-NPCAP
Spray Body covers
• Purple plastic cover for easy identification of non-
potable water system
• Marked with “Do Not Drink!” warning in both English
and Spanish
• Snaps onto all 1800R Series Spray Body covers

Model Description
1800-NPCAP Purple cover for 1800 Series Spray Heads

34 www.rainbird.com
Non Potable Water Irrigation System | Design Guide

XFD Purple On-Surface Dripline

The Most Flexible, Pressure-Compensating In-line
Emitter Tubing Available to Irrigate Ground Cover,
Dense Plantings, Hedge Rows and More

Features
• Extra flexible tubing for fast, easy installation Purple XFD Dripline
• Dual-layered tubing (brown over black or purple
over black) provides unmatched resistance to
chemicals, UV damage and algae growth Operating Range
• Patent pending emitter design provides for • Pressure: 8.5 to 60 psi (0.58 to 4.1 bar)
increased reliability • Flow rates: 0.6 gph and 0.9 gph (2.3 l/h and 3.5 l/h)
• Longer lateral runs than competition • Temperature: Water up to 100° F (37.8C); Ambient
• Unique material offers significantly greater up to 125° F (51.7C)
flexibility, allowing tighter turns with fewer • Required filtration: 120 mesh
elbows for easier installation
• Choice of flow rates, spacing and coil lengths Specifications
provides design flexibility for a variety of • Outside diameter: 0.634” (16.1 mm)
non-turfgrass applications • Inside diameter: 0.536” (13.6 mm)
• Use an Air/Vaccum Relief Valve Kit when • Wall thickness: 0.049” (1.2 mm)
installation is below soil
• Spacing: 12” or 18”
• Lengths: 100’, 250’, and 500’ coils
Model Description • Use with XF Dripline Insert Fittings, Rain Bird Easy
XFD Purple On-Surface Dripline, 0.61 gph (2.3 l/h) Fit Compression Fittings, or Twist Lock Fittings
XFDP-06-12-500
flow rate, 12” (30.5 cm) emitter spacing, 500’
(Purple)
(152.4 m) tubing length

XFD Purple On-Surface Dripline, 0.61 gph (2.3 l/h)

XFDP-06-18-500
flow rate, 18” (45.7 cm) emitter spacing, 500’
(Purple)
(152.4 m) tubing length
How To Specify

XFD Purple On-Surface Dripline, 0.92 gph (3.5 l/h) XFD - P - 09 - 12 - 100
XFDP-09-12-500
flow rate, 12” (30.5 cm) emitter spacing, 500’
(Purple)
(152.4 m) tubing length Model Length of Tubing
XFD 100 = 100' (30.5 m)
Dripline 250 = 250' (76.2 m)
XFD Purple On-Surface Dripline, 0.92 gph (3.5 l/h)
XFDP-09-18-500 500 = 500' (152.4 m)
flow rate, 18” (45.7 cm) emitter spacing, 500’
(Purple)
(152.4 m) tubing length
Purple Emitter Spacing
q Click the icons below for more information 12 = 12" (30.5 cm)
18 = 18" (45.7 cm)
Design & Technical Resources
Flow Rate
06 = .61 gph (2.3 l/h)
09 = .92 gph (3.5 l/h)
Drawings WRITTEN SPECS TECH SPECS RESOURCES

www.rainbird.com 35
 Non Potable Water Irrigation System | Design Guide

XFS-CV Dripline
With Copper Shield™ Technology and Heavy-Duty
Check Valve

Features
• Rain Bird’s low-profile emitter design reduces in-line
pressure loss, allowing longer lateral runs, simplifying
design and reducing installation time 10'
• Variety of emitter flow rates, emitter spacing and coil
XFS-CV Dripline
lengths provide design flexibility for either sub-surface
turf or sub-surface shrub and groundcover applications
• XFS Sub-Surface Dripline emitters are protected from Made with Recycled Content
root intrusion by Rain Bird’s patent-pending Copper All Rain Bird XF Dripline (XFD, XFS, XFCV, XFS-CV)
Shield™ Technology resulting in a system that does not qualify for LEED credit 4.2 because they contain at
require maintenance or replacement of chemicals to least 20% Polyethylene post-consumer recycled
prevent root intrusion material by cost. These come in an assortment of
• The pressure-compensating emitter design provides a coil sizes, flow rates, and emitter spacing
consistent flow over the entire lateral length ensuring
higher uniformity for increased reliability in the Operating Range
pressure range of 8.5 to 60 psi • Pressure: 8.5 to 60 psi (0.58 to 4.14 bar)
• Dual-layered tubing (copper over black) provides • Flow rates: 0.4 gph, 0.6, and 0.9 gph (1.6 l/h,
unmatched resistance to chemicals, algae growth and 2.3 l/hr and 3.5 l/hr)
UV damage • Temperature:
• Grit Tolerant: Rain Bird’s proprietary emitter design - Water: Up to 100°F (37.8° C)
resists clogging by use of an extra-wide flow path
- Ambient: Up to 125°F (51.7° C)
combined with a self-flushing action
• Required Filtration: 120 mesh

Model Description Model Description

XFS-CVP-06-12-500 XFS-CV 0.6GPH 12” SPC PURPLE 500 FT XFS- CVP- S- 06- 12- 500 XFS-CV 0.6GPH 12” SPC PURPLE STRIPE 500 FT
XFS-CVP-06-18-500 XFS-CV 0.6GPH 18” SPC PURPLE 500 FT XFS- CVP-S-06-18-500 XFS-CV 0.6GPH 18” SPC PURPLE STRIPE 500 FT
XFS-CVP-09-12-500 XFS-CV 0.9GPH 12” SPC PURPLE 500 FT XFS-CVP- S- 09-12-500 XFS-CV 0.9GPH 12” SPC PURPLE STRIPE 500 FT
XFS-CVP-09-18-500 XFS-CV 0.9GPH 18” SPC PURPLE 500 FT XFS- CVP- S- 09-18-500 XFS-CV 0.9GPH 18” SPC PURPLE STRIPE 500 FT

q Click the icons below for more information How To Specify

XFS-CV - 04 - 12 - 500
Design & Technical Resources
Model Coil Length
Xeri-Flex 500 = 500 ‘ (152 m)
Sub-Surface
CV = Check Valve Emitter Spacing
CVP = Purple 12 = 12 inches
Drawings WRITTEN SPECS TECH SPECS RESOURCES Flow Rate
04 = 0.4 gph
Purple stripe also available

36 www.rainbird.com
Non Potable Water Irrigation System | Design Guide

XBS - Black Stripe Tubing

High quality, flexible tubing for use in any low-volume
irrigation system

Features
• 1/2” & 3/4” blank tubing extruded from polyethylene
resin materials for consistent durability
• 1/2” tubing is now available in two different sizes: 0.600”
I.D. X 0.700” O.D. and 0.615” I.D. X 0.705” O.D.
• Available in five color stripes to differentiate zones
• UV-resistant for installations at or below grade
• Compact coils for easy storage and shipping
Black Stripe Tubing

Model Description Outside Diameter Inside Diameter Wall Thickness

XBS700P100 1/2” tubing, 100 foot (30 m) coil with purple striping 0.700” (17.8 mm) 0.600” (15.2 mm) 0.050” (1.3 mm)
XBS700P500 1/2” tubing, 500 foot (152 m) coil with purple striping 0.700” (17.8 mm) 0.600” (15.2 mm) 0.050” (1.3 mm)
XBS500P 1/2” tubing, 500 foot (152 m) coil with purple striping 0.705” (18 mm) 0.615” (15.6 mm) 0.045” (1.2 mm)
XBS940P500 3/4” tubing, 500 foot (152 m) coil with purple striping 0.940” (24 mm) 0.820” (21 mm) 0.060” (1.5 mm)

q Click the icons below for more information How To Specify

XBS - 700 - P - 500
Design & Technical Resources
Model
XBS Coil Length
100 = 100 ‘ (30 m)
500 = 500 ‘ (152 m)
Stripe
Drawings TECH SPECS RESOURCES P = Purple

Outside Diameter
700 = 0.700” (17.8 mm)
940 = 0.940” (24 mm)

www.rainbird.com 37
 Non Potable Water Irrigation System | Design Guide

Removable Flush Cap

For Easy Fit Fittings (Purple, to designate non-potable water)
Features
• Faster and easier to install—requires up to 50% less force to install
tubing, making your installation project faster and easier
• Fittings and adapters that can accommodate virtually connection
situation, great for maintenance and retrofitting existing systems.
• Works with virtually any manufacturer’s ½” tubing, where the outside
diameter ranges from .630” to .669” (16mm to 17mm), and threaded
EasyFit adapters are compatible with threaded PVC Pipe Fittings. MDCFPCAP

Operating Range
• Pressure: 0 to 60 psi (0 to 4.1 bar) Model Description
• Accepts tubing O.D. of 0.630” to 0.669” (16 -17mm) MDCFPCAP Purple to designate non-potable water

PC Diffuser Cap
Features PC-DIFF-PPL
• Cap snaps securely onto the PC Module and XB emitter outlet
to create bubbler effect and prevent wash out
• Designed for quick and easy installation Model Description
• Made of UV-resistant polyethylene material.
PC-DIFF-PPL Purple to designate non-potable water

RWS/RWS-Mini Accessories
Investment Protection
Features
• Deep and broad roots yield transplantation
survivability, stability in high winds, fast and healthy
RWS-GRATE-P
growth. Watering Efficiency
• Subsurface irrigation minimizes run-off and
evaporation. Landscape Aesthetics
• Installs at grade and helps minimize damage

q Click the icons below for more information Model Description

Design & Technical Resources

Root Watering System 4” (10 cm)
RWS-GRATE-P
Purple Grate
Drawings WRITTEN SPECS TECH SPECS RESOURCES

38 www.rainbird.com
Non Potable Water Irrigation System | Design Guide

Top Green Codes and Green Programs

International Plumbing Code (IPC) ASHRAE 189.1

GG120-14 Water Use Efficiency Prescriptive Option
404.1 Landscape irrigation systems. Landscapes shall be 6.4.1 Site Water Use
designed to limit or eliminate the use of potable water for Maximum 1/3 of improved landscape area is allowed to be
irrigation. Irrigation of exterior landscaping shall comply irrigated with potable water
with Sections 404.1.1 and 404.1.2
SS WE EE IEQ MR CO alternate on-site sources of water:
Green Globes Alternate on-site sources of water include, but are not
limited to:
3.c Alternative Water
(a) rainwater or stormwater harvesting,
3.c.1 UFC 1-200-02, Paragraph 2-4.3 Alternative Water
(b) air conditioner condensate,
“Where life-cycle cost-effective and permitted by local
laws and regulations, use alternative water sources.” (c) gray water from interior applications and treated as
Requirements: required,
3.c.1.1: Submit documentation of water efficient landscape (d) swimming pool filter backwash water,
and irrigation strategies, such as water reuse and the use of (e) cooling tower blowdown water,
harvested rainwater.
(f) foundation drain water,
LEED (g) industrial process water, or
Leadership in Energy and environmental design (h) on-site wastewater treatment plant effluent.
• 1 point for the Water Efficiency goal credit category http://www.kcashrae.org
(WE) if a total of 50% outdoor water use reduction is
achieved. Landscape irrigation
• Credit category of LEED for the Integrative Process (404.1.2 IgCC/402.1.2 WEP)
(IP)= I point for the implementation stage when • Requires landscape irrigation systems be designed to
demonstrating at least one On-Site non potable water reduce potable water use by 50%.
supply source was analyzed for at least two of the water Water Conservation and Efficiency - WEP 2015
demand elements including landscape irrigation and
Non-Potable Moved from IgCC to International Plumbing
Site elements. Code (IPC)
California AB1881 • Included in 2015WEP

California Model Efficient Landscape Ordinance

§ 492.14 Recycled Water.
(a) The installation of recycled water irrigation systems
shall allow for the current and future use of recycled
water.
(b) All recycled water irrigation systems shall be
designed and operated in accordance with all
applicable local and State laws.
(c) Landscapes using recycled water are considered
Special Landscape Areas.
The ET Adjustment Factor for new and existing (non-
rehabilitated) Special Landscape Areas shall not exceed 1.0.

www.rainbird.com 39
Rain Bird Corporation Rain Bird Corporation Rain Bird International, Inc.
6991 E. Southpoint Road 970 West Sierra Madre Avenue 1000 West Sierra Madre
Tucson, AZ 85756 Azusa, CA 91702 Azusa, CA 91702
Phone: (520) 741-6100 Phone: (626) 812-3400 Phone: (626) 963-9311
Fax: (520) 741-6522 Fax: (626) 812-3411 Fax: (626) 852-7343 

Rain Bird Technical Services Specification Hotline www.rainbird.com

(800) RAINBIRD (1-800-724-6247) 800-458-3005 (U.S. and Canada)
(U.S. and Canada) [email protected]

® Registered Trademark of Rain Bird Corporation D41305

© 2018 Rain Bird Corporation 11/18