Scribd
Upload
23 views8 pages

Energy Audit Check List

The document provides details for conducting an energy audit at a facility, including documentation like P&IDs, process descriptions, and equipment details. It requests information about the control system architecture and connectivity, as well as specific instrumentation and measurement details for equipment like compressors, gearboxes, and drivers. The checklist aims to gather information about the existing monitoring infrastructure and identify opportunities to install additional instrumentation if needed.

Uploaded by

Umar Faizal S
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
23 views8 pages

Energy Audit Check List

The document provides details for conducting an energy audit at a facility, including documentation like P&IDs, process descriptions, and equipment details. It requests information about the control system architecture and connectivity, as well as specific instrumentation and measurement details for equipment like compressors, gearboxes, and drivers. The checklist aims to gather information about the existing monitoring infrastructure and identify opportunities to install additional instrumentation if needed.

Uploaded by

Umar Faizal S
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 8

Energy Audit Checklist

P&ID
PFD
Documents
Primary

SLD
Datasheet
Process Description
Number of opretational/standby

GAD
VFD/Soft started/ DOL
Process Material/ Composition
Documents
Secondary

Energy meter Availability


CT Availability
Estimated Tag Count
Wiring Diagram
Control Philosophy

Make and model


IO Module Spare Availability
Communication protocols supported
Gateway model
manual IO/ pushbuttons.
OPC/UA Support version
Ethernet Port Availability and type
Controller
Details

Serial Port Availability and type


Approximate Wiring distance(Insturment and
Cable) from controller to equipment
RTD Module avialability
Power supply details.
Other remarks if any
Control Narratives
SCADA
System Architecture

Network Details.
Connectivity/

Avialability

Firewall details/model
Data

cloud availability/ details


Switches and Access Point Details.
DMZ (hardware/software)

Min Flow / Max Flow


All Line Sizes Noted
Motor HP/KW
Coupling type
Specific Details
Equipment

Presence of Vibration Sensors


Turn On/Off Auto or Manual
Specific Details
Equipment
Number of Stages
Compression Ratio
Inlet/outlet pressure
Process Fluid
Seal Type

System

Compressor performance head

Lube oil system

Vibration

Centrifugal Compressor Bearing

Thrust Balance
Gas Cooler Performance
Scrubbers

Dry Gas seals

recycle

Vibration
Gearbox
Bearing

inlet filters

axial compressor

fuel gas system

turbine performance
Driver 1. Gasturbine

lube oil system


Bearings

Vibration

Electrical

Vibration
Driver 2. Motor
Windings

Bearings
Equipment Location Details

Customer Name
Site Location
Location of the Equipme
Equipment Number
Equipment Type

If Energy meter is not available.

If instruments need to be installed can we use the existing.


Modbus RTU, TCP/IP Support or any other protocol supported

Number of free Channels avilable.


Measured INSTR type Protocol Comments
head
process power
efficiency
pressures
temperatures
cooler efficiency
filter differential pressure
overall vibration from proximity probes
spectral analysis
temperatures
Orbits
Axail position
Thrust Bearing Temperature
Temperature Drop
Liquid level
Pressure drop
gas pressure
filter differential pressure
flow rates
surge margin.

overall vibration from proximity probes


spectral analysis
temperatures
Orbits

differential pressure
discharge pressure
deviation from baseline
inlet vane position / schedule
pressure vs compressor discharge pressure
flow rate
thermal efficiency
inlet temperature deviation
temperature spread
pressure
temperature
cooler efficiency
filter differential pressure
bearing temperature
orbits
overall vibraiton from proximity probes
Casing vibration
spetral analysis

phase currents
real power
overall vibrational from proximity probe
casing vibration
spectral analysis
temperatures
temperature spread
bearing temperature
orbits
the existing.
ocol supported
Data Validation Param
INSTR
Yes CALC_DD
No EXT-CM
Will be informed.

You might also like