Scribd Logo
Upload

Welcome to Scribd!

  • 18 views

    Lenh Co Ban

    Uploaded by

    Hoa Le
    Show interfaces - display statistics for all interfaces on a device. Show version - display currently loaded IOS version, hardware, and device information. Show arp - display the arp table of the device.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOCX, PDF, TXT or read online from Scribd

    Lenh Co Ban

    Uploaded by

    Hoa Le
    18 views3 pages
    Show interfaces - display statistics for all interfaces on a device. Show version - display currently loaded IOS version, hardware, and device information. Show arp - display the arp table of the device.

    Original Title

    lenh co ban

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Show interfaces - display statistics for all interfaces on a device. Show version - display currently loaded IOS version, hardware, and device information. Show arp - display the arp table of the device.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    18 views3 pages

    Lenh Co Ban

    Uploaded by

    Hoa Le
    Show interfaces - display statistics for all interfaces on a device. Show version - display currently loaded IOS version, hardware, and device information. Show arp - display the arp table of the device.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    You are on page 1of 3

    Cc l nh s d ng trong packet tracer Router>enable Router#configure terminal Router(config)#hostname R1 R1(config)#enable password <mat khau ko dc ma hoa> R1(config)#enable secret <mat

    khau dc ma hoa> R1(config)#line console 0 R1(config-line)#password <password> < t pas cho line console 0> R1(config-line)#login R1(config)#line vty 0 4 R1(config-line)#pas R1(config-line)#password <password> < t pas cho line vty 0 n> R1(config-line)#login R1(config-line)#exit R1(config)#banner motd " m t l i c nh bo ho c ch " R1(config)#interface fastEthernet 0/0 R1(config-if)#ip address < a ch m ng > <subnetmask> R1(config-if)#no shutdown R1(config)#interface serial 0/0 R1(config-if)#ip address < a ch m ng > <subnetmask> R1(config-if)#no shutdown

    User EXEC Mode

    enable - Enter Privileged EXEC mode

    Privileged EXEC Mode Copy run start L u c u hnh hi n t i vo NVRAM copy running-config startup-config - Copy the active configuration to NVRAM. copy startup-config running-config - Copy the configuration in NVRAM to RAM. erase startup-configuration - Erase the configuration located in NVRAM. ping ip_address - Ping to that address. traceroute ip_address - Trace each hop to that address. show interfaces - Display statistics for all interfaces on a device. show clock - Show the time set in the router. show version - Display currently loaded IOS version, hardware, and device information. show arp - Display the ARP table of the device. show startup-config - Display the saved configuration located in NVRAM. show running-config - Display the contents of the currently running configuration file. show ip interface - Display IP statistics for interface(s) on a router. configure terminal - Enter terminal configuration mode.

    Terminal Configuration Mode hostname hostname - Assign a host name to device. enable password password - Set an unencrypted enable password.

    enable secret password - Set a strongly encrypted enable password. service password-encryption - Encrypt display of all passwords except secret. banner motd# message # - Sets a message-of-the-day banner. line console 0 - Enter console line configuration mode. line vty 0 4 - Enter virtual terminal (Telnet) line configuration mode. interface Interface_name - Enter interface configuration mode.

    Line Configuration Mode login - Enable password checking at login. password password - Set line password.

    Interface Configuration Mode ip address ip_address netmask - Set interface IP address and subnet mask. description description - Set interface description. clock rate value - Set clock rate for DCE device. no shutdown - Set interface to up. shutdown - Administratively set interface to down.

    You might also like