BIOS Changes History

General Information:

M0UJ9xxUSA is Flash CD ROM image.

M0UJTxxUSA is Flash in DOS zip package.
M0UJYxxUSA is Flash in Windows utility.
M0UKTxxA is the binary image. (BIOS)
NOTE: All changes carry forward. That is, if a change is added in 01,it is
also in 02, 03 etc.

This file will be updated from the beginning with first Production BIOS release

CHANGES for M0UKT02A

1.ITT94975:UUT can not power on from s4/s5 state after disabled "Wake on LAN" in
BIOS
2.ITT94762:Some items of systemID is incorrect such as graphics.
3.ITT94764:Power button LED is always off in S3 state but not blink as SPEC
4.ITT94765:CLR_CMOS(SW) function is invalid,and there is no beep ,BIOS setting
cannot load default by CLR_CMOS(SW) jumper
5.ITT94766:Clear battery will also clear all of BIOS setting(except password
setting).
6.ITT94906:USB KB/Mouse plugging in USB2.0/3.0 port isn't available during Win7 OS
7.ITT94973:System detects two monitors whereas only one monitor connecting to
HDMI/DP
8.ITT94972:UUT will no display if re-pluging monitor to onbard VGA/DP port after
boot
9.ITT95073:CPU speed information is incorrect In BIOS setup.
10.Adjust BIOS setup layout as Lenovo Spec

CHANGES for M0UKT03A

1.ITT95271:OEM Activation 2.0/3.0 function is invalid.

2.ITT95277:BIOS version is abnormal in BIOS setup and POST
3.ITT95278:Serial port 1 resources always show "3F8/IRQ4" in OS Device Manageer.
4.ITT95273:Active Video always shows "PEG" in BIOS setup System summary.
5.ITT95328:Debug code shows in the lower right corner of POST logo.
6.ITT95274:Fans operate state are abnormal in BIOS setup.
7.ITT95073:CPU speed information is incorrect In BIOS setup.
8.ITT95276:No Fan failure error displays in POST if power on without FANs.
9.ITT95290:There is no Memory size/speed showing in BIOS setup and POST screen.
10.Porting USB Debug card function.
11.Improve BIOS Setup Layout as Spec

CHANGES for M0UKT04A

1.ITT95330:Lack of Network boot devices in boot sequence.

2.ITT95539:Date will be default to 01/01/2005 when remove Battery.
3.ITT95610:"CPU Core count" shows abnormal in BIOS setup.
4.ITT95278:Serial port 1 resources always show "3F8/IRQ4" in OS Device Manageer.
5.ITT95614:System can be woken up in DOS when set "Wake On LAN " to "Disabled".
6.ITT95615:System can be woken up via Magic when set onboard Ethernet Controller to
"Disabled"
7.ITT94906:USB KB/Mouse plugging in USB2.0/3.0 port isn't available during Win7 OS
8.ITT94973:System detects two monitors whereas only one monitor connecting to
HDMI/DP
9.Implement USB Virtual KBC support function.
10.Implement Windows UEFI Firmware Update function.
11.Add New SPI ROM(GD25Q64&MX25L6473F) support as HW requrie

CHANGES for M0UKT05A

1.ECR359502:The contents od Readme.txt can not meet spec.

2.ECR359506:The setup layout can not meet spec.
3.ECR359479:The start up logo can not meet spec
4.ECR360458:When input incorrect PAP password 3 times,the UUT will appear 1 long
beep then 3 short beep.
5.ECR360533:When set muti-monitor as disable,the external graphic card also can
output.
6.ECR360456:In the limited BIOS Setup,the item "Require Admin. Pass .for F12
Boot"can be modified.
7.ECR360534:The UUT can not contact to network in DOS.
8.ITT95275:Disable "USB Support" function is invalid.
9.ITT95848:The default value of "Onboard Audio Controller" show "Disabled" in BIOS
Setup Menu.
10.ITT95849:The status of "Onboard Ethernet" show "Disabled" in System Summary .
11.ITT95576:Card reader will be detected as external devices after pluging Card
Reader cable to front USB2.0 pin header.
12.ITT95600:Power button HDD LED is always off in S0 state.
13.ITT95846:"Lan Boot Agent" always list in BIOS Setup Menu.
14.ITT95850:Manufacturer and Version in type 3 show abnormal with RW tool.
15.ITT95760:BIOS setup and POST information show in the center of 16:9 monitor.it
is ok with 4:3 monitor.It is normal in Windows OS.
16.ITT95277:BIOS version is abnormal in BIOS setup and POST
17.Upgrade CRB to 028 and Lenovo Emoudule to 20.02.04.
18.Upgrade ME to 11.0.0.1183.
19.Implement USB Tune as HW required

CHANGES for M0UKT06A

1.ECR361586:ACPI yellow bang in device manager

2.ECR361390:Bluetooth icon in "device and printers" .
3.ITT94868:There is a yellow mark on Device Manager .
4.ITT95272:MFGDone state can be cleared by flashing BIOS with "fpt" tool.
5.ITT96053:Front USB Ports" & "Rear USB Ports" can not be loaded default
6.ITT96608:"Pause" key is invalid in POST screen.
7.ITT95722:UUT can't wake up from S3 by Alarm.but S4/S5 is OK.
8.ITT96157:RTC wake up on alarm function is invalid.
9.ITT95616:System always follow primary boot sequence if set "Startup Squence " to
"Automatic".
10.ITT95742:USB mouse is not available in BIOS setup.
11.ITT96055:Card reader device is shown in BIOS setup boot sequence and Startup
Menu.
12.ITT95271"SLIC" will not present in "RW" ACPI table after implementing
"oax.bat /win"."MSDM" will not present in "RW" ACPI table after implementing
"oa3.bat /win".
13.ITT96166:Recovery CMOS setting function is abnormal.
14.ITT95559:COM port errors occured when run Passmark BurnIn test about 2 minutes.
15.Improve ITT95763:Below errors in BIOS setup refer to BIOS layout
16.Improve ITT95275:Disable "USB Support" function is invalid.
17.Upgrade ME to 11.0.0.1191
CHANGES for M0UKT07A

1.ITT95550:UUT can't be waken up from S3,S4,S5 state via serial port modem device.
2.ITT96164:Type 17 Memory device shows abnormal in RW.
3.Improve ITT95763:Some errors in BIOS setup refer to BIOS layout.
4.ITT96057:No IPV4/IPV6 Network Boot information in BIOS Setup Boot Sequence.
5.ITT96322:Multi-Monitor Support is disable if select active video to "IGD"
6.ITT96375:Maximum Speed shows incorrect in RW.
7.ITT96156:POP and PAP can not be deleted with Clear CMOS.
8.ITT96370:No error display in POST screen if decrease memory size.
9.ITT96308:Microcode Revision shows incorrect in BIOS setup menu.
10.ITT96409:WHQL test item "USB Exposed Port System Test"failed on Win10 OS.
11.ITT96401:WHQL test item "UAA Test (System, Manual)" failed on Lenovo 510
Platform.
12.ITT96402:WHQL test item"Class Driver Round Trip Test (System, Manual)" failed on
Lenovo S510.
13.ITT96400:WHQL test item "Class Driver Audio Logo Test (System)" failed on Lenovo
510 Platform.
14.ITT96325:System event log can not be verified and cleared.
15.Implement RBM function.
16.Upgrade MCU to M36506E3_00000056
17.Change USB debug card function.
18.Disable TPM over SPI bus.

CHANGES for M0UKT08A

1.The time resuming from S4 is about 5 minutes,and S3 is normal.

2.set "boot block version" as "1"
3.ECR361719:The "Turbo mode" also showed in BIOS setup even with G440 CPU not
support Turbo mode.
4.ECR362229:The value of Bit51:55 in Type0 are incorrect.
5.Add OKR Patch.
6.Improve ITT95763:Some errors in BIOS setup refer to BIOS layout
7.ECR362316:The prompt for "startup boot menu" is incorrect.
8.ITT95612:System always follow primary boot sequence if set "Wake On LAN " to
"Automatic".
9.ITT96425:F12 always show primary boot sequence if encounter wake event and POST
error.
10.Improve ITT96409:WHQL test item "USB Exposed Port System Test"failed on Win10
OS.
11.ITT96286:Error will be occurred if modify password by RBM tool.
12.TT96293:Change setup settings fail by RBM tool.
13.ITT96299:"Listall" and "Load Default" are invalid with RBM tool

CHANGES for M0UKT09A

1.ECR364164:Lenovo S510:W7:HCK:sleep and pnp test failed

2.ECR363987: Lenovo S510:W10:HLK:sleep with IO test failed
3.ECR362895:There are 2 PS2 yellow mark in device management.
4.ECR361777:Chcklogo test fail for PS2 keyboard/mouse devices
5.ECR362313:The items in Secure Boot are grayed when set CSM as Enabled.
6.ECR361295:The lan wake up function is abnormal When UUT run as "S0-G3-S5"
7.ECR361723:The memory size is less then 3GB in windows OS properties with 8GB
memory installed in win7 32bit OS.
8.ECR361680:The srdos function failed with some parameters.
9.ITT96361::TCG BIOS function is abnormal.
10.ITT96398:WHQL test item "System-Sleep and PNP (disable and enable) with IO
Before and After (Certification)"failed on S510 with PS2 devices.
11.ITT96400:WHQL test item "Class Driver Audio Logo Test (System) " failed on
Lenovo 510 Platform.
12.ITT96773:UUT will hang up in POST after doing RBM "Load default" event.
13.ITT96660:UUT will follow Automatic boot sequence if AC off and on.
14.ITT96870:UUTwill follow abnormal boot sequence if set "Wake from Serial Port
Ring" to "Automatic"
15.ITT96732:Warm boot function is invalid during POST in UEFI mode.
16.ITT96896:Some BIOS setting options are incorrect in RBM listall.txt.
17.ITT95945:Unnecessary setps operate in DOS OS.
18.ITT96418:JT BIOS package can not flash when set "Require Admin. Pass. when
Flashing" to "Yes".
19.Improve ITT95763:Some errors in BIOS setup refer to BIOS layout
20.Implement Fancurve function.

CHANGES for M0UKT10A

1.ECR361387:Lenovo S510:W10:HLK:Brightness2 Test failed

2.ECR361681:There will be abnormal phenomenon when run SRWIN
3.ECR362228:Update BIOS with flash2.exe failed.
4.ITT96406:WHQL test item "Brightness2 test"failed on Lenovo S510 Win10 OS.
5.ITT96947:DP audio no audio output by DP monitor.
6.ITT96400:WHQL test item "Class Driver Audio Logo Test (System)" failed on Lenovo
510 Platform.
7.ITT96401:WHQL test item "UAA Test (System, Manual)" failed on Lenovo 510
Platform.
8.ITT96402:WHQL test item "Class Driver Round Trip Test (System, Manual)"failed on
Lenovo S510.
9.ITT95853:Write Baseboard information fail using oa3info.bat.
10.Improve ITT95763:Some errors in BIOS setup refer to BIOS layout.
11.ITT96661:Flash parameter testing is abnormal.
12.ITT96443:External LAN card lists abnormal in Manufacture Startup Sequence.
13.ITT96587:IPV6 displays before IPV4 in UEFI mode.
14.ITT96816:BIOS package can not be flash if set "Wake Up on Alarm" BIOS setting

CHANGES for M0UKT11A

1.ECR359512:"Error 1962:No Operating System..." will display when boot to OS.

2.ECR361549:Error 1962 during preload process and can't continue preload unless
disconnecting network cable from preload port.
3.ECR361079:The boot sequence is incorrcect when set wake on lan as"Automatic"
4.ECR366338:The font of BIOS SETUP is incorrect.
5.ECR366138:The win7 markerfile will be flashed successfully when MFGdone is set.
6.ITT97218:Active information will be cleared if run "oax.bat /win" after setting
MFGDone
7.ITT97248:Set "Allow Flashing BIOS to a Previous Version" to "No",same version
BIOS can be flashed.
8.ITT97237:UUT will hang lenovo screen when restart windows with legacy mode.debug
code:b2/A2
9.ITT97220:UUT hangs in POST logo screen in legacy mode OS.
10.Upgrade VBIOS to 1032 and GOP to 1039.
11.Upgrade ME to 11.0.0.1197.
12.Upgrade MCU to M36506E3_0000006A.
CHANGES for M0UKT12A

1.ECR367042:Can't boot from windows backup USB HDD when OS Optimized Default is
Enable
2.ECR367696:The HT item also showed in BIOS setup with Pentium G4400 installed.
3.ECR367184:The OEM string in SMBIOS type 11 can not meet spec.
4.ECR366996:Language item also can not modified when enter into limited BIOS setup.
5.ECR361295:The lan wake up function is abnormal When UUT run as "S0-G3-S5"
6.ECR367120:Wake on Lan should be Hided when Erp is Enabled.
7.ECR367552:SecureBoot can not be set as Enabled manually when CSM is "Enabled".
8.ECR367402:"System Date" show incorrect
9.ECR366430:The SD card can not be recognized
10.ECR366712:Some parameters are incorrect in listall when run RBM
11.ITT95293:Blue screen(0X0116) occur when run PowerButton on/off stress test about
29 loops with Win7 32bit OS
12.ITT97151:WHQL test item"BitLocker Tpm+PIN+ USB and Recovery Password tests for
NON ARM devices"failed on Lenovo S510 Win10(10586) OS.failed with TPM
13.ITT97434:Intel HT setting will display if the CPU does not support the function.
14.ITT97153:WHQL test item "TPM 2.0 - Supplemental test"failed on Lenovo S510
Win10(10586) OS.failed with TPM
15.ITT97403:Secure Boot can not set to "Enable" if CSM is Enable.
16.ITT97439:Unwant "Floppy Drive A" will show in "System Summary" in UEFI mode.
17.ITT97402:"Wake on LAN" and "Wake from Serial Port Ring" will be hidden if set
"Enhanced Power Saving Mode" to "Enabled",which should be grayed.
18.ITT97401:Language can be selectable if boot to limitation BIOS setup menu.
19.Improve ITT95763:Some errors in BIOS setup refer to BIOS layout
20.Implement Card reader function
21.Upgrade VBIOS to 9.0.1037

CHANGES for M0UKT13A

1.ECR368860:3 short beep then 1 long beep will occur when flash BIOS from 11A to
12A with JT/JY/J9 Package.
2.ECR368836:3 short beep then 1 long beep will occur when do BBR from 11A to 12A
3.Improve ECR367909:The time resuming from S5 is too long.
4.Improve ECR367189:The time resuming from S5 is too long.
5.ECR367189:Flash BIOS abnormally in win10 with JY package.
6.ECR368868:The time of ESlogo Displayed is less then 1.5s in UEFI Mode.
7.ECR366329:The user defined logo can not display with full screen.
8.Fixed ECR367184:The OEM string in SMBIOS type 11 can not meet spec.
9.Fixed ITT96361::TCG BIOS function is abnormal.
10.Fixed the BootBlock will not be updated when BBR.
11.Fixed PXE issue in DOS.
12.Add OKR patch

CHANGES for M0UKT14A

1.Fixed OKR can not be called by SW.

2.Upgrade MCU to M36506E3_00000076
3.ECR369826:BBR function is abnormal
4.ITT98104:MFGDONE and OA3 OA2 will clear after Boot Block Recovery.
5.ITT98247:Login to the limited BIOS Setup menu, Security Chip and Clear TCG
Security Feature value can be modify.
6.ITT98246:Set "Serial Port1 Address" to "Disabled","Wake from Serial Port Ring"
still shows and changeable in BIOS setup menu.
7.Improve BIOS setup layout.
8.ECR367189:Flash BIOS abnormally in win10 with JY package.
CHANGES for M0UKT15A

1.Fixed some setup value error.

CHANGES for M0UKT16A

1.Improve ECR361079:The boot sequence is incorrcect when set wake on lan

as"Automatic".
2.ECR367399:"Boot up num-lock status" function is abnormal.
3.Upgrade UEFI Diag to Ver02.80.01
4.Upgrade MCU to M36506E3_0000007C.
5.Fixed F1,F2 function is invalid during post with Kidney bean keyboard.
6.Improve BIOS setup layout.

CHANGES for M0UKT17A

1.Add Wireless Lan Enable/Disable item in BIOS setup Device page.

CHANGES for M0UKT18A

1.Fixed the UUT will hang windows logo after Disable onboard lan

CHANGES for M0UKT19A

1.Fixed the UUT will follow automatic boot sequence with intel WLAN installed when
power on the UUT.

CHANGES for M0UKT20A

1.Update CPU Microcode.

CHANGES for M0UKT21A

1. Fix - Windows S4 stress BSOD issue.

2. Fix - Windows reboot BSOD issue.
3. Fix - Windows LOGO Hang issue.
4. Fix - Correct BIOS Revision display under setup.
5. Fix - Asset tag have abnormal value after flashing.
6. Fix - UEFI mode won't need to display option keys message.
7. Fix - Set Active Video to IGD cause LAN card could not be used.

CHANGES for M0UKT22A

1. Fixed the "Wireless LAN" item will be hidden when disable "Onboard Ethernet
Controller".
2. Fixed broken screen will occur when hotplug the VGA monitor during post.
3. Set CTLE as 7 for special SSD.
4. [Important] Update includes security fixes.
5. Fixed cfgwin can not modify passward.
6. Fixed TPM setting can not be modified by srdos.
7. Fixed some setup layout errors.

CHANGES for M0UKT23A

1. Fixed UUT will occur 0175 error when set PAP/POP with srwin.
2. Change baseboard Product as SSID(0x30F617AA)
3. Fixed the Ethernet MAC Address shows incorrect when "Onboard Ethernet
Controller" is Disabled
4. Add CPU C8 state support.
5. Upgrade UEFI Diag to Ver02.09.09
6. [Important] Update includes security fixes.

CHANGES for M0UKT24A

1.Change the "OS Optimized Defaults" behavior with WMI

2.Update IPV4/IPV6 design as Lenovo Required.
3.[Important] Update includes security fixes.

CHANGES for M0UKT25A

1.Support for TPM PPI20

2.[Important] Update includes security fixes.

CHANGES for M0UKT26A

1.Fixed The system will hang "72" if change "security chip" from "Enable" to
"Disable" in BIOS setup with i7-6700 CPU.

CHANGES for M0UKT27A

1.Fixed the USB Smart USB Protection of Lenovo Business Vantage tool can not work
normal.

CHANGES for M0UKT28A

1.Update LEN-15197 Intel SGX Update and Attestation Key Recovery.

2.Update LEN-14695 AMI BIOS update input validation failure.

CHANGES for M0UKT29A

1.Update ME version 11.8.50.3399.

2.Update LEN-17787 pre-boot DMA protection for PciBus_16 module code.
3.Update LEN-16457 for unsafe opcodes exposed in Intel SPI based products.

CHANGES for M0UKT30A

1.Update LEN-16864 ISSUE #1 "3rd Party OptionROM Launched Prior to EndOfDxe"

2.Update LEN-16864 ISSUE #2 "Insecure Handling of UEFI Variables in Platform Sample
code"
3.Update LEN-17787 pre-boot DMA protection.
4.Update Microcode for LEN-18346 Side Channel Analysis Method Update
5.Update code for LEN-17787 pre-boot DMA protection.

CHANGES for M0UKT31A

1.Update LEN-20503 Aptio 5.x TPM2.0 PCR Reset.

CHANGES for M0UKT32A

1.Update Microcode for security issue.

2.Update "SA50044_Supplement" about security code from Lenovo vendor.

CHANGES for M0UKT33A

1.Update "LEN-25874-26011" TianoCore Security Issue #1309#1133#1134#1135#1136 from

AMI's EIP459317.
2.Update "LEN-26460-26545" AMI APTIO 5.x Purley Security Audit SA50064 from AMI's
EIP459321.
3.Update "SA50067_Patches" security case from Lenovo.

CHANGES for M0UKT34A

1.Update Microcode for security issue.

2.Update "LEN-26137" for flash security.

CHANGES for M0UKT35A

1.LEN-28235 - LEN28273
2.LEN-29089-29096
3.LEN-29088-29094
4.LEN-28078-28091_SdioDriver_09
5.LEN-28178-28202
6.LEN-27713-28137
7.LEN-27776-27794

CHANGES for M0UKT36A

1.Update security 20Q1

CHANGES for M0UKT37A

1.Update security for IPU Intel Processors Data Leakage Advisory.

2.Update security for Security Review.
3.Update HDP security password.
4.Update security for Q3-20.
5.Update security for Intel-bios-advisory.
6.Update security for DDR4 protection bypass.
7.Intel NDA.
8.Pxe boot.