Proteus Simulation Based Circuit Diagrams
Proteus Simulation Based Circuit Diagrams
Here we have shared some Proteus Simulation-Based Circuit Diagrams, check the list below:
https://circuit-diagramz.com/proteus-simulation-based-circuit-diagrams/ 1/9
12/24/21, 2:58 PM Proteus Simulation Based Circuit Diagrams -
Remote controlled Home automation without using microcontroller (Part-1) Schematic Circuit Diagram
We
will make this project in two part. In the first part, we will design a remote control circuit using RF module
and in the second part, we then connect…
Digital alarm clock using 4026 logic gates Schematic Circuit Diagram
Description and concept behind
digital clock This digital alarm clock project use 4026 IC which is decade counter as well as seven segment
driver . Seven segment display is used…
Schematic Circuit Diagram Constant frequency PWM Using 555-Timer proteus simulation
Constant
frequency PWM Using 555-Timer With the basic astable circuit, the duty ratio cannot be controlled
without affecting the frequency. Using the above circuit, it is possible to maintain a…
Schematic Circuit Diagram Variable frequency PWM Using 555-Timer proteus simulation
By including a
variable resistor in series with the capacitor in the above circuit, frequency can be varied along with the
duty ratio. As this resistor is involved in both…
Schematic Circuit Diagram Sequential Switching Circuit Using 555-Timer proteus simulation
The astable
multivibrator can be used as a clock pulse generator for digital ICs like counters. CD 4017 is a decade
counter, so ten events can be run in sequence…
https://circuit-diagramz.com/proteus-simulation-based-circuit-diagrams/ 2/9
12/24/21, 2:58 PM Proteus Simulation Based Circuit Diagrams -
Schematic Circuit Diagram Linear Ramp Signal Generator Using 555-Timer proteus simulation
Ramp Signal
Generator Using 555-Timer The astable multivibrator with discharge terminal connected to the threshold
terminal offers the least resistance during discharge period of the capacitor. This gives a sharp…
Schematic Circuit Diagram Pulse Width Modulation with modulating signal proteus simulation
Sinusoidal
Pulse Width Modulation The monostable multivibrator, with the modulating signal at the control voltage
terminal, gives pulse width modulation according to the modulating signal. For this, the basic
requirement…
Schematic Circuit Diagram Make/Modify a Component in Proteus (2D Graphics) proteus simulation
Modifying the view of a Relay Let’s begin with a simple component, the Relay. In this example, the shape
and the orientation of the component are modified. A basic relay…
Schematic Circuit Diagram Creating UART Modules-Modifying the COMPORT proteus simulation
The
Proteus software has an option to interface with external modules in real-time through the COMPIM
(Comport Physical Interface Module) component. Its default view is a DB9-Pin Serial Port connector.…
https://circuit-diagramz.com/proteus-simulation-based-circuit-diagrams/ 3/9
12/24/21, 2:58 PM Proteus Simulation Based Circuit Diagrams -
https://circuit-diagramz.com/proteus-simulation-based-circuit-diagrams/ 4/9