Automizer Spec 1004

Download as pdf or txt
Download as pdf or txt
You are on page 1of 7

CONTROL & BALANCE VALVE 15 – 50mm AUTOMIZER

VALVE SPECIFICATIONS
Pressure/Temp. rating: 2500 kPa / -30°C to 120°C
Materials:
- Flow Optimizer: Glass Filled Polymer
- Cartridge: AISI Type 304 Stainless Steel
AISI Type 17-7 PH Stainless Steel Spring
- Body: Forged Brass ASTM B283
- End Connections: Brass
- Stem: Brass
- Stem Seals: EPDM O-Rings
- Ball Valve: Nickel-Plated Brass Ball
- Ball Seals: Teflon Seals with EPDM O-Rings
Flow Rate Range: 0.021 l/s – 7.192 l/s

DIMENSIONS & WEIGHTS (NOMINAL) (measured in mm unless noted)


A: LENGTH
SIZE DEPTH
UNION B C D E F WEIGHT
1 (NOT
HOUSING CONNECTION HEIGHT LENGTH HEIGHT HANDLE HEIGHT (KGS)
mm Inch SHOWN)
FNPT MNPT
15 1/2" 22 25
20 3/4" 165.1 22 25 133.4 205.7 72.6 63.5 260.4 96.8 1.6
25 Small 1" Small N/A 39
25 Large 1” Large 35 40
32 1 1/4" 259.3 35 40 266.7 196.3 99.6 63.5 291.8 108.0 3.6
40 Small 1 1/2" 40 42
Small

40 Large 1 1/2"
Large 359.4 64 40 182.9 221.5 85.9 63.5 298.5 131.1 5.5
50 2"

MODEL NUMBER SELECTION


F3 A R
Insert body size:
1 = 1/2" - 1", 2 = 1" - 1 1/2", 3 = 1 1/2" - 2"
Insert kPaD control range:
1 = 10-95, 2 = 22-210, 4 = 40-390, 8 = 90-880
Insert Optimizer size:
Select 1, 2, 3, 4, 5 or 6 (see Kvs selection for code)
Insert inlet x outlet union end connections:
2 2
Body size Fixed End or Union End Union End only
Female NPT Male NPT
E = 1/2", F = 3/4", H = 1/2", I = 3/4",
F3AR1 3
G = 1" J = 1"
G = 1", P = 1 1/4", H = 1/2", I = 3/4",
F3AR2
Q = 1 1/2" J = 1", S = 1 1/4", T = 1 1/2"
F3AR3 Q = 1 1/2", R = 2" S = 1 1/4", T = 1 1/2", U = 2"
Insert Actuator model number:
Select from actuator selection table
If actuator is supplied by others, insert:
1 = Neptronic, 2 = Johnson Controls, 3 = Invensys, 4 = Honeywell,
5 = Siemens, 6 = Belimo, 7 = KMC Controls, 8 = ELODrive

NOTES:
1
Select appropriate Union Connection length and add to "A" dimension, Housing Length.
2
Select the Fixed End first and the Union End second. Mixing different size tailpieces will affect the Kv-value.
3
Tailpiece not available, threaded tailpiece used with an adapter.

Denmark Singapore USA

1 10/2004
FlowCon International assumes no responsibility for mistakes, if any, in any printed material.
CONTROL & BALANCE VALVE 15 – 50mm AUTOMIZER
ACTUATED BALL Kvs AND FLOW RATE TABLE (l/sec)
MODEL FLOWRATE (l/sec) @ Differential Pressure (kPa)*
FULL CLOSE
SIZE NO. Kvs
PORT OFF ∆P2
(Optimizer)
10 20 30 40 50 60 70 80 90 100 (m3/h)
F3AR1_1 0.030 0.043 0.053 0.061 0.068 0.074 0.080 0.086 0.091 0.096 0.345
F3AR1_2 0.053 0.075 0.092 0.106 0.119 0.130 0.140 0.150 0.159 0.168 0.603
F3AR1_3 0.098 0.139 0.171 0.197 0.220 0.241 0.260 0.278 0.295 0.311 1.121
15mm 900kPa
F3AR1_4 0.182 0.570 0.315 0.363 0.406 0.445 0.481 0.514 0.545 0.575 2.069
F3AR1_5 0.280 0.396 0.485 0.560 0.627 0.686 0.741 0.792 0.841 0.886 3.190
F3AR1_6 • 0.469 0.664 0.813 0.939 1.050 1.150 1.240 1.330 1.410 1.480 5.345
F3AR1_1 0.030 0.043 0.053 0.061 0.068 0.074 0.080 0.086 0.091 0.096 0.345
F3AR1_2 0.053 0.075 0.092 0.106 0.119 0.130 0.140 0.150 0.159 0.168 0.603
F3AR1_3 0.098 0.139 0.171 0.197 0.220 0.241 0.260 0.278 0.295 0.311 1.121
20mm 900kPa
F3AR1_4 0.197 0.278 0.341 0.394 0.440 0.482 0.521 0.557 0.591 0.623 2.241
F3AR1_5 0.326 0.460 0.564 0.651 0.728 0.798 0.862 0.921 0.977 1.030 3.707
F3AR1_6 • 0.560 0.792 0.971 1.120 1.250 1.370 1.480 1.580 1.680 1.770 6.379
F3AR1_1 0.023 0.032 0.039 0.045 0.051 0.056 0.060 0.064 0.068 0.072 0.259
F3AR1_2 0.045 0.064 0.079 0.091 0.102 0.111 0.120 0.129 0.136 0.144 0.517
25mm F3AR1_3 0.098 0.139 0.171 0.197 0.220 0.241 0.260 0.278 0.295 0.311 1.121
900kPa
small F3AR1_4 0174 0.246 0.302 0.348 0.389 0.427 0.461 0.493 0.523 0.551 1.983
F3AR1_5 0.288 0.407 0.498 0.576 0.643 0.705 0.761 0.814 0.863 0.910 3.276
F3AR1_6 • 0.523 0.739 0.905 1.050 1.170 1.280 1.380 1.480 1.570 1.650 5.948
F3AR2_3 0.318 0.450 0.551 0.636 0.711 0.779 0.841 0.900 0.954 1.010 3.621
25mm F3AR2_4 0.538 0.760 0.931 1.080 1.200 1.320 1.420 1.520 1.610 1.700 6.121
690kPa
large F3AR2_1 0.795 1.120 1.380 1.590 1.780 1.950 2.100 2.250 2.390 2.510 9.052
F3AR2_2 • 1.090 1.540 1.890 2.180 2.440 2.670 2.890 3.080 3.270 3.450 12.41
F3AR2_3 0.303 0.525 0.525 0.606 0.677 0.742 0.801 0.857 0.909 0.958 3.448
F3AR2_4 0.553 0.782 0.957 1.110 1.240 1.350 1.460 1.560 1.660 1.750 6.293
32mm 690kPa
F3AR2_1 0.788 1.110 1.360 1.580 1.760 1.930 2.080 2.230 2.360 2.490 8.966
F3AR2_2 • 1.110 1.560 1.910 2.210 2.470 2.710 2.930 3.130 3.320 3.500 12.59
F3AR2_3 0.303 0.428 0.525 0.606 0.677 0.742 0.801 0.857 0.909 0.958 3.448
40mm F3AR2_4 0.553 0.782 0.957 1.110 1.240 1.350 1.460 1.560 1.660 1.750 6.293
690kPa
small F3AR2_1 0.772 1.090 1.340 1.540 1.730 1.890 2.040 2.180 2.320 2.440 8.793
F3AR2_2 • 1.100 1.550 1.900 2.200 2.460 2.690 2.910 3.110 3.290 3.470 12.50
F3AR3_1 2.570 3.640 4.460 5.150 5.760 6.310 6.810 7.280 7.720 8.140 29.31
40mm
F3AR3_2 690kPa 3.940 5.570 6.820 7.880 8.800 9.650 10.40 11.10 11.80 12.50 44.83
large
F3AR3_3 • 5.150 7.280 8.920 10.30 11.50 12.60 13.60 14.60 15.40 16.30 58.62
F3AR3_1 2.570 3.640 4.460 5.150 5.760 6.310 6.810 7.280 7.720 8.140 29.31
50mm F3AR3_2 690kPa 3.940 5.570 6.820 7.880 8.800 9.650 10.40 11.10 11.80 12.50 44.83
F3AR3_3 • 5.150 7.280 8.920 10.30 11.50 12.60 13.60 14.60 15.40 16.30 58.61

NOTES:
2
Close-Off Pressures measured with 35 in-lb. actuator. The “Close Off Pressure” is the maximum allowable pressure drop across the valve body when the valve is
fully closed. Since the torque available from the actuator helps determine the close off pressure rating, higher pressure ratings can be achieved by using a larger
actuator.

Denmark Singapore USA

2 10/2004
FlowCon International assumes no responsibility for mistakes, if any, in any printed material.
CONTROL & BALANCE VALVE 15 – 50mm AUTOMIZER

CARTRIDGE FLOW RATES (+/-5%)


15 - 25mm, 1/2" - 1" (3/4" cartridge) 25 - 40mm, 1" - 1 1/2" (1 1/2" cartridge)
Range 1 Range 2 Range 4 Range 8 Range 1 Range 2 Range 4 Range 8
l/s GPM 10-95 22-210 40-390 90-880 l/s GPM 10-95 22-210 40-390 90-880
kPaD kPaD kPaD kPaD kPaD kPaD kPaD kPaD
0.021 0.33 F360111 0.189 3.00 F361109
0.032 0.50 F360101 0.210 3.33 F361110
0.035 0.55 F360211 0.252 4.00 F361112
0.042 0.67 F360102 0.284 4.50 F361209
0.047 0.75 F360201 F360411 0.295 4.67 F361114
0.063 1.00 F360103 F360202 F360401 0.315 5.00 F361210
0.069 1.10 F360811 0.336 5.33 F361116
0.084 1.33 F360104 F360402 0.379 6.00 F361118 F361212 F361409
0.095 1.50 F360203 F360801 0.421 6.67 F361120 F361410
0.105 1.67 F360105 0.442 7.00 F361214
0.126 2.00 F360106 F360204 F360403 F360802 0.462 7.33 F361122
0.147 2.33 F360107 0.505 8.00 F361124 F361216 F361412
0.158 2.50 F360205 0.547 8.67 F361126
0.168 2.67 F360108 F360404 0.568 9.00 F361218 F361809
0.189 3.00 F360206 F360803 0.589 9.33 F361128 F361414
0.210 3.33 F360110 F360405 0.631 10.00 F361130 F361220 F361810
0.221 3.50 F360207 0.673 10.67 F361132 F361416
0.252 4.00 F360112 F360208 F360406 F360804 0.694 11.00 F361222
0.295 4.67 F360114 F360407 0.715 11.33 F361134
0.315 5.00 F360116 F360210 F360805 0.757 12.00 F361136 F361224 F361418 F361812
0.336 5.33 F360408 0.799 12.67 F361138
0.379 6.00 F360212 F360806 0.820 13.00 F361226
0.421 6.67 F360410 0.841 13.33 F361140 F361420
0.442 7.00 F360214 F360807 0.883 14.00 F361142 F361228 F361814
0.505 8.00 F360216 F360412 F360808 0.926 14.67 F361144 F361422
0.589 9.33 F360414 0.946 15.00 F361230
0.631 10.00 F360416 F360810 1.009 16.00 F361232 F361424 F361816
0.757 12.00 F360812 1.073 17.00 F361234
0.883 14.00 F360814 1.093 17.33 F361426
1.009 16.00 F360816 1.136 18.00 F361236 F361818
1.178 18.67 F361428
1.199 19.00 F361238
1.262 20.00 F361240 F361430 F361820
1.325 21.00 F361242
1.346 21.33 F361432
1.388 22.00 F361244 F361822
1.430 22.67 F361434
1.514 24.00 F361436 F361824
1.598 25.33 F361438
1.640 26.00 F361826
1.683 26.67 F361440
1.767 28.00 F361442 F361828
1.850 29.33 F361444
1.893 30.00 F361830
2.019 32.00 F361832
2.145 34.00 F361834
2.271 36.00 F361836
2.397 38.00 F361838
2.524 40.00 F361840
2.650 42.00 F361842
2.776 44.00 F361844

Denmark Singapore USA

3 10/2004
FlowCon International assumes no responsibility for mistakes, if any, in any printed material.
CONTROL & BALANCE VALVE 15 – 50mm AUTOMIZER
CARTRIDGE FLOW RATES (+/-5%)
40 - 50mm, 1 1/2" - 2" (2" cartridge)
Range 1 Range 2 Range 4 Range 8
l/s GPM 10-95 22-210 40-390 90-880
kPaD kPaD kPaD kPaD
0.757 12.00 F3C2136
0.883 14.00 F3C2142
1.009 16.00 F3C2148
1.136 18.00 F3C2154 F3C2236
1.262 20.00 F3C2160
1.325 21.00 F3C2242
1.388 22.00 F3C2166
1.514 24.00 F3C2172 F3C2248 F3C2436
1.640 26.00 F3C2178
1.703 27.00 F3C2254
1.767 28.00 F3C2184 F3C2442
1.893 30.00 F3C2190 F3C2260
2.019 32.00 F3C2196 F3C2448
2.082 33.00 F3C2266
2.145 34.00 F3C21102
2.271 36.00 F3C21108 F3C2272 F3C2454 F3C2836
2.397 38.00 F3C21114
2.461 39.00 F3C2278
2.524 40.00 F3C2460
2.650 42.00 F3C2284 F3C2842
2.776 44.00 F3C2466
2.839 45.00 F3C2290
3.028 48.00 F3C2296 F3C2472 F3C2848
3.218 51.00 F3C22102
3.281 52.00 F3C2478
3.407 54.00 F3C22108 F3C2854
3.533 56.00 F3C2484
3.596 57.00 F3C22114
3.785 60.00 F3C2490 F3C2860
4.038 64.00 F3C2496
4.164 66.00 F3C2866
4.290 68.00 F3C24102
4.543 72.00 F3C24108 F3C2872
4.795 76.00 F3C24114
4.921 78.00 F3C2878
5.300 84.00 F3C2884
5.678 90.00 F3C2890
6.057 96.00 F3C2896
6.435 102.00 F3C28102
6.814 108.00 F3C28108
7.192 114.00 F3C28114

Denmark Singapore USA

4 10/2004
FlowCon International assumes no responsibility for mistakes, if any, in any printed material.
CONTROL & BALANCE VALVE 15 – 50mm AUTOMIZER

ACTUATOR SPECIFICATIONS
Control Signal: On/Off (On/Off Or 3-Point Floating), Modulating (Analog Or Pulse Width Modulation)
Power Supply: 24VAC + 20% 50/60Hz, 110VAC 60Hz, or 220 50Hz, 24VDC + 10%
Power Consumption: 2 – 10VA, dependent on speed selected
Transformer Sizing: 3 VA-Class 2 power source
Overload Protection: Electronic throughout 0 – 95° rotation
Torque: Min 35 in-lbs
Angle of Rotation: Max 95°, Electronically or Mechanically adjustable 20 – 100%
Position Indication: Built in indicator
Direction of Rotation: Reversible with switch - Clockwise/ Counter Clockwise
Manual Over-Ride: Push button
Humidity Rating: 5 to 95% RH, non condensating
Ambient Temperature: -30°C to +60°C (-22°F to +130°F)
Storage Temperature: -40°C to +80°C (-40°F to +176°F)
Auxiliary Switch: Adjustable 0° to 95° 6 A @ 24VAC, (Single pole double throw) (form C contact)
Zero and Span: Programmable zero and span adjustment
Fail-Safe: Spring Return, Power Caps or Enerdrive Capacitive, programmable fail-safe system.

ACTUATOR MODEL NUMBER SELECTION

Siemens GDE131.1P GDE161.1P GDE136.1P GDE166.1P GMA121.1P GMA161.1P

Torque of 44 in-lb • • • •
Torque of 62 in-lb • •
Control Signal: On/Off
Control Signal: 3 Point • • •
Control Signal:
• • •
Modulating 0–10 Vdc
Power Supply 24 VAC • • • • • •
Speed: 108 sec
Speed: 90 sec • • • • • •
Built-In Auxiliary Switches • •
Fail Safe (Spring Return) • •

MF40- MA40- MA40- MA40- MA40- MF40- MF40- MS40- MS40-


Invensys 6083 7043 7043-501 7040 7040-501 7043 7043-501 7043 7043-501

Torque of 35 in-lb • • • • • • • •
Torque of 70 in-lb •
Control Signal: On/Off • • • •
Control Signal: 3 Point • • •
Control Signal:
• •
Modulating 0–10 Vdc
Power Supply 24 Vac • • • • • • •
Power Supply 120 Vac • •
Speed: 90 sec • • • • • • • • •
Built-In Auxiliary Switch • • • •
Fail Safe (Spring Return) • • • • • • • •

Denmark Singapore USA

5 10/2004
FlowCon International assumes no responsibility for mistakes, if any, in any printed material.
CONTROL & BALANCE VALVE 15 – 50mm AUTOMIZER

ML6161D ML6174D ML7161A ML7174A ML6185A ML6185C ML8185A ML8185C ML7285A ML7285C
Honeywell 2006 2009 2008 2001 1000 1008 1008 1006 1007 1005

Torque of 35 in-lb • •
Torque of 50 in-lb • • • • • •
Torque of 70 in-lb • •
Control Signal: On/Off • •
Control Signal: 3 Point • • • •
Control Signal:
• • • •
Modulating 4–20 mA/2–10 Vdc
Power Supply 24 VAC • • • • • • • • • •
Speed: 90 sec • • • • • • • • • •
Built-In Auxiliary Switches • • • • •
Fail Safe (Spring Return) • • • • • •

Neptronic BBT-
24
BBT-
1000
BBT-
1060
BBT-
1021
BBT-
1080
BBTF-
1000
BBTF-
1060
BBTF-
1021
BBTF-
1080
BBTHV-
1100
BBTHV-
1160
BBTHV-
1120
BBTHV-
1180
BBM
2000A
BBM
2060A

Torque of 50 in-lb • • • • • • • • • • • • • • •
Control Signal: On/Off • • • • • • • • • • • • •
Control Signal: 3 Point • • • • • • • • • • • • •
Control Signal:
Modulating 2-10 Vdc, • •
4-20mA and PWM
Power Supply 24 VAC • • • • • • • • • • •
Power Supply 110 VAC • • • •
Speed: 90 sec • • • • •
Speed: 20-30 sec • • • • • • • • • •
Built-In Auxiliary
• • • • • •
Switches
Fail Safe
TM • • • • • • •
(Enerdrive System)

M9106- M9106- M9106- M9106- M9206- M9206- M9206- M9206-


Johnson Controls AGA2 AGC2 GGA2 GGC2 AGA2 AGC2 GGA2 GGC2
Torque of 35 in-lb • • • •
Torque of 53 in-lb • • • •
Control Signal: On/Off • •
Control Signal: 3 Point • • • •
Control Signal:
• • • •
Modulating 0–10Vdc
Power Supply 24 VAC • • • • • • • •
Speed: 90 sec • • • •
Speed: 72 sec • • • •
Built-In Auxiliary Switches • • • •
Fail Safe (Spring Return) • • • •

MEP- MEP- MEP- MEP-


KMC Controls 5072 5073 5372 5373
Torque of 50 in-lb • • • •
Control Signal: On/Off
Control Signal: 3 Point • •
Control Signal:
• •
Modulating 2–10 Vdc
Power Supply 24 Vac • • • •
Speed: 90 sec • •
Speed: 60 sec • •
Fail Safe (Power Caps) • •

Denmark Singapore USA

6 10/2004
FlowCon International assumes no responsibility for mistakes, if any, in any printed material.
CONTROL & BALANCE VALVE 15 – 50mm AUTOMIZER

BN- BNP- BS- BSP- BN- BNP- BS- BSP-


ELODrive 44C1U 44C1U 26F1U 26F1U 44P1U 44P1U 26P1U 26P1U
Torque of 26 in-lb • • • •
Torque of 44 in-lb • • • •
Control Signal: On/Off • • •
Control Signal: 3 Point • • • •
Control Signal:
• • • •
Modulating 0–10Vdc
Power Supply 24 VAC • • • • • • • •
Speed: 90 sec • • • • • • • •
Built-In Auxiliary Switches
Fail Safe (Spring Return) • • • •

Belimo LM24 LM24S LF24 LF24S LF120 LF120S LF24-3 LF24-3S LM24SR LF24SR LF24SRS
Torque of 35 in-lb • • • • • • • • • • •
Control Signal: On-Off • • • • • •
Control Signal: 3-point • • • •
Control Signal: Modulating
2-10 VDC • • •
Power Supply: 24 VAC • • • • • • • • •
Power Supply: 120 VAC • •
Speed: 75 Second • • • •
Speed: 80-110 Second • • •
Speed: 150 Second • • • •
Built in Auxiliary Switch • • • • •
Fail Safe: Spring Return • • • • • • • •

Denmark Singapore USA

7 10/2004
FlowCon International assumes no responsibility for mistakes, if any, in any printed material.

You might also like