Scribd
Upload
50 views5 pages

Beam Design Draft

The document contains design calculations for a beam, one-way slab, and doubly reinforced beam. It includes assumptions, material properties, dimensions, reinforcement details, and checks for adequacy of the designs. Calculations are shown for maximum moment, required reinforcement area, and capacity compared to factored moment.

Uploaded by

John Christopher Baquing
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
50 views5 pages

Beam Design Draft

The document contains design calculations for a beam, one-way slab, and doubly reinforced beam. It includes assumptions, material properties, dimensions, reinforcement details, and checks for adequacy of the designs. Calculations are shown for maximum moment, required reinforcement area, and capacity compared to factored moment.

Uploaded by

John Christopher Baquing
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 5

Beam Design ( Known Actual Moment)

* Assumption : Beam is tension controlled

Max Moment Applied = 0 kN.m


beam width , b = 350 mm
overall depth , h = 592.5 mm
concrete cover , cc 40 mm
effective depth, d = 540 mm
Ø = 25 mm
Area of steel is code compliant
n = 5 pcs
f'c (compressive strength of concrete) = 24 mPa
f'y (yield strength of steel) = 340 mPa
B = 0.85
Þmax 0.0244
Þact 0.0130
Þmin 0.0041
w 0.1840
Ru 3.9360

Mcap > > > 361.54 kN.m the beam is adequte


A's provided > > > 2454.369261 mm²
1 way slab design ( Known Actual Moment / Live Load)
* Assumption :
Simplyy supported
Beam is tension controlled
1m linear strip analyzed

Live Load = 4 kPa


f'c (compressive strength of concrete) = 20.7 mPa
f'y (yield strength of steel) = 275 mPa
Clear Span = 3000 mm
hmin = 118.928571428571 mm
Main bar diameter = 12 mm
hmin = 119 mm
concrete cover , cc 20 mm
effective depth, d = 93 mm
Ultimate Load 10721.764 N/m
Maximum Factored Moment: 12061.9845 N.m

Main bars:
Use 12.00 mm-Ø @
Governing Spacing 205 mm spaced @o.c.

Temp bars:
Ø = 10 mm
Use 10.00 mm-Ø @
Governing Spacing 329 mm spaced @o.c.
Design
Moment = 670 kN.m
f'c = 20.7 mPa
f'y = 345 mPa
b = 350 mm
h = 650 mm
top cover = 60 mm
bott cover = 50 mm

ß = 0.85
Þmax = 0.021
w = 0.344
R = 5.676
Mucap = 643.675 kN.m

design as doubly reinforced beam


Moment = 670 kN.m
f'c = 20.7 mPa
f'y = 345 mPa
b = 350 mm
h = 650 mm
top cover (d') = 60 mm
bott cover = 50 mm
As1 = 4335 mm²
a = 242.857142857143 mm
c = 285.714285714286 mm
f's = 474 mPa
compression steel will yield,use A's=As2
As2 = 157.004 mm²

As (tension side) = 4492.004 mm²


As (tension side)prov 4492.004 mm²
A's (compression side) = 157.004 mm²
A's (compression side)prov 226.190 mm²
Tension side
Ø 25 mm
n 9 pcs

Compression side
Ø 12 mm
n 2 pcs

You might also like