Scribd Logo
Upload

Welcome to Scribd!

  • 27 views

    CEMS

    Uploaded by

    Naveed Rabbani
    1. The document describes a Continuous Emission Monitoring System (CEMS) being designed and installed for a 2x660MW coal-fired power plant in China to monitor emissions from the plant's flue gas. There will be a total of 6 CEMS installed to monitor emissions from both boilers at various points. 2. The CEMS will continuously monitor sulfur oxides, nitrogen oxides, oxygen, carbon oxides, gas flow, pressure, temperature, and humidity from the flue gas. Measured data will be recorded and sent to the plant's control system. 3. As of the document date, installation of 2 CEMS sets for Boiler 2 was finished with commissioning scheduled for

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    CEMS

    Uploaded by

    Naveed Rabbani
    27 views2 pages
    1. The document describes a Continuous Emission Monitoring System (CEMS) being designed and installed for a 2x660MW coal-fired power plant in China to monitor emissions from the plant's flue gas. There will be a total of 6 CEMS installed to monitor emissions from both boilers at various points. 2. The CEMS will continuously monitor sulfur oxides, nitrogen oxides, oxygen, carbon oxides, gas flow, pressure, temperature, and humidity from the flue gas. Measured data will be recorded and sent to the plant's control system. 3. As of the document date, installation of 2 CEMS sets for Boiler 2 was finished with commissioning scheduled for

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. The document describes a Continuous Emission Monitoring System (CEMS) being designed and installed for a 2x660MW coal-fired power plant in China to monitor emissions from the plant's flue gas. There will be a total of 6 CEMS installed to monitor emissions from both boilers at various points. 2. The CEMS will continuously monitor sulfur oxides, nitrogen oxides, oxygen, carbon oxides, gas flow, pressure, temperature, and humidity from the flue gas. Measured data will be recorded and sent to the plant's control system. 3. As of the document date, installation of 2 CEMS sets for Boiler 2 was finished with commissioning scheduled for

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    27 views2 pages

    CEMS

    Uploaded by

    Naveed Rabbani
    1. The document describes a Continuous Emission Monitoring System (CEMS) being designed and installed for a 2x660MW coal-fired power plant in China to monitor emissions from the plant's flue gas. There will be a total of 6 CEMS installed to monitor emissions from both boilers at various points. 2. The CEMS will continuously monitor sulfur oxides, nitrogen oxides, oxygen, carbon oxides, gas flow, pressure, temperature, and humidity from the flue gas. Measured data will be recorded and sent to the plant's control system. 3. As of the document date, installation of 2 CEMS sets for Boiler 2 was finished with commissioning scheduled for

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    CEMS

    1\design and device information.


    China Power Hub 2x660MW coal fired power plant project have designed one sets of
    Continuous Emission Monitoring System (CEMS) for each boiler to monitoring emission flue gas
    at the outlet of the sea water Flue Gas Desulfurization (FGD).and another one set of CEMS install
    at the entrance of the seawater FGD. Totally, there are 3 separate local CEMS room with our sets of
    CEMS, and one local CEMS room is located at 90 high meters of the chimney with 2 sets of CEMS
    to monitoring the outlet emission flue gas of both boiler, the other two is located ground separately
    for each boiler.
    CEMS for CPHGC power plant can continual monitor the SOX, NOX, O2, COX and the gas
    flow, pressure, temperature, humidity, turbidity of the flue gas. All the measured data will be record
    at local processor and sent to power plant Distribute control system to let the operators monitor and
    control FGD so as to guarantee the emission flue gas is less than the design data. All measure data
    accuracy is less than 1% of the full range.
    CEMS adopts the direct extraction method, and each measuring point of flue gas emission
    monitoring shall keep the required distance. The analytical equipment, such as gas sampling cooler,
    automatic condensate discharge device, calibration device and analytical instrument, shall be
    installed in the CEMS monitoring and analysis room with air conditioning near the sampling point.
    And flow, temperature and pressure adopt separate local instrument. The gas sampling probe and
    sampling tube shall be heated and thermostatically controlled.
    Continuous Emission Monitoring System (CEMS) consists of four parts: sensor unit,
    measurement and control unit, local main control station, data monitoring unit and remote monitor
    & control platform. CEMS Software is the system software applied on data monitoring unit for
    collecting, monitoring, computing, displaying, alarming and reporting. PAS‐DAS CEMS Software is
    the data collection and processing software developed by Beijing SDL Technology Co., Ltd for
    continuous emission monitoring according to the national standard for environmental protection
    and with respect to the CEMS of the Company. The system can display, in real time, the
    numerical values of different pollutant parameters of the complete fume monitoring system and
    its operation status of the system and pollutant monitoring data, and screen, compute and work
    out the data according to the relevant standard and methods and automatically generate the
    daily, monthly, quarterly and annual statements according to the format for the environmental‐
    protection statement. The illustration of System Structure is as following
    2\current engineering situation
    The installation of both 2 sets of CEMS for #2 boiler is finished, and the commissioning work
    is schedule in March 2019.Meanwhile, the other 2 sets of CEMS for boiler 2 will be installed in
    March 2019 and commissioning in May2019.

    You might also like