Unit 6

Download as doc, pdf, or txt
Download as doc, pdf, or txt
You are on page 1of 16

UNIT 6: VALUATION OF BONDS, PREFERENCE AND COMMON STOCK

Content
6.0 Aims and Objectives
6.1 Introduction
6.2 The Valuation Process
6.3 The General Valuations Frame Work
6.4 Value Price Relationship
6.5 Valuation of Bonds
6.6 Valuations of Preference Shares
6.7 Valuations of Common Shares
6.8 Summary
6.9 Answers to Check Your Progress
6.10 Model Examination Questions
6.11 References

6.0 AIMS AND OBJECTIVES

This unit aims at presenting the meanings of security, types and their calculator.

After studying this unit, you will be able to:


 explain the types of securities
 calculate the value of bonds, preference stock and common stock
 identify the various methods of calculating securities

6.1 INTRODUCTION

You are aware that risk and return go together. If the risk is high returns will also be high, and
low risk followed by low return. There is no conception of risk without at the same time
considering return and vice-versa. In fact risk would be defined in terms of volatility or
variability of return.

102
There could be various behind investing money by small investors to acquisitions for prestige
and control, an average decision is founded on a buy-sell strategy with the expected holding
period return in the foreground.

It must be noted that all classes of investors are interested in knowing the values of securities i.e.
common stock, preference stock and bonds. They plan to hold them for periods ranging from
short to infinity. Since, the investor belongs to special class of goner buyers and sellers, he
would be influenced in his decision to buy/sell by two sets of values. One his own value and two
the value externally determined by the market and known as price. These are the determinants
of the buy – sell decisions of any goods or services in general. It is important to weigh. The risk
and return, which affect the valuation, process both of the individual investor and the whole
constellations of investors that constitute market.

Hence, the valuation is the key concept for investment decisions. No buy-sell action will take
place without values.

6.2 THE VALUATION PROCESS

The basic valuation is a constant exercise is rationality with cost, benefits, and uncertainty as
important variables. The valuation process will be examined in view of the performance of a
firm in relation to the performance of industry to which it belongs; and the industry performance
in turn, is linked to performance of the economy and the market is general. The three sequential
steps in the valuations process would, therefore, be as follows:
a) economy analysis
b) industry analysis
c) company analysis

6.3 THE GENERAL VALUATION FRAME WORK

Most investors look at price movements in security markets. They perceive opportunities of
capital gains in such movements. All would wish if they could successfully predict them and
ensure gains. Few, however, recognize that value determines price and both change randomly. It
would be useful for an intelligent investor to be aware of this process.

103
The basic valuations model
Value of a security is a fundamental variable and depends on its promised return, risk and the
discount rate. You may recall the basic understanding of present value concept, with the
mention of fundamental factors like returns and discount rate. In fact the basic valuation model
is none else than present value procedure. Given a risk adjusted discount rate and the future
expected earnings flow of security in the form of interest, dividend, earnings, or cash flow, you
can always determine the present value of follows.

PV = CF1 __ + CF2 + CF3 + ……. CFn


1+r (1 + r)2 (1 + r)3 (1 + r)n
PV = Present value
CF = Cash flow interest, dividend, earnings per time period up to ‘n’ number
of years
r = Risk adjusted discount rate

6.4 VALUE PRICE RELATIONSHIP

Present value also known as intrinsic value or economic value, determines the price. You have
learned the role of buying and selling pressures which make prices more toward value.

The following are the valuation rules


1. Buy when value is more than price. This underlies the fact that shares are under priced
and it would be a bargain to buy now and sell when prices move up toward value.
2. Sell when value is less than price. In a situation, like this, shares would be overpriced
and it would be advantageous to sell them now and void loss when price later moves
down to the level of the value.
3. Do not trade when value is equal to price. This is a state where the market price is in
equilibrium and is not expected to though suppose a share of an export company is
currently traded at Birr 80 against face value of Birr 10

Now, the news of the company having lost a valuable export contract amounting to 40%
of its expected total market sales of the coming year is gained by most active investors in
the market. They revise the estimates of future income downward by 40% and risk

104
discount rate and other things remain same, rework the present value at Birr 48 (60% of
80 birr). Now you can apply rule 2 here.

Another example a company whose share was treating Birr 20 (par value Birr 10). Now
the alert investor get the news of the lifting of a half-year long lock-out and signing of a
three-year wage agreement quite beneficial to the management much before even the
media could get it. Other things discount rate remain same, an analyst will revise their
estimates of present value Birr 40

This will come under rule 1. Investors would expect price to move up toward the new
value of Birr 40 and would immediately start buying at or around the current price of
Birr 20.

6.5 VALUATION OF BONDS

A bond is an instrument or acknowledgement issued by a business unit or government the


amount of loan, rate of interest and the terms of loan repayment. In order to value a bond you
must understand the following.

Par value.
value. It is the amount or value stated on the face of the bond. It represent the amount of the
firm borrows and promises to repay at the time of maturity. It can be any denomination.

Coupon Rate of Interest.


Interest. A bond carries a specific interest rate, which is called the coupon rate.
The interest payable to the bondholder is simply par value of bond multiplied by the coupon
rate.

Maturity period. Every bond will have maturity period. On completion of the maturity period
the principal amount has to be repaid as per the agreed terms while issuing such bonds call
provision. Some times bonds may be issued under a provision that the business unit will have an
option to pay back the bond amount before the maturity period. These are known as callable
bonds.

The intrinsic value of a bond is equal to the present value of its expected case flows. The
coupon interest payments and principal payments are known and the present value is determined

105
by discounting these future payments from the issuer at an appropriate discount rate or market
yield. The usual present value calculating are made with the help of the following equation.

PV =

PV = Present value of the bond today


C = Coupon rate of interest
TV = Terminal value repayable
R = Appropriate discount rate or market yield
N = Number of years to maturity

Ex. A 10% bond of Birr 1,000 issued with a maturity of five years at par. The discounted rate of
marketing 10%. The interest is paid annually. What would be the bond value.
PV = 100 __ + 100__
100__ + 100___
100___ + 100___
100___ + 100+ 1000
(1 + .10) (1 + .10)2 (1 + .10)3 (1 + .10)4 (1 + .10)5
= 100 x .9091 + 100x .8264 + 100 x .7513 + 100x .6830 + 1100 x .620
= 90.91 +| 82.64 + 75.13 + 68.30 + 682.99
= 999.97

Ex. A bond of Birr 1,000 at 6% is issued at par. The bond had a maturity period of five years.
As of today five more years are left for final repayment at par. The current discount rate is 10
percent. What is the present value?
PV = 60__ + 60___ + 60 __ + 60 60 + 1000
(1 + .10) (1 + .10)2 (1 + .10)3 (1 + .10)4 (1 + .10)5
= 60 x .9091 + 60 x .8264 + 60 x .7513 + 60 x .683 + 1060 x .6209
= 54.55 + 45.08 + 40.98 + 658.15
= 847.35

Relationship between coupon rate, required yield and price.


price.
You are aware that yields change in market place, price of bonds change to reflect the new
required yield. When the required yield on a bond rises above its coupon rate, the bond sells at a
discount. When the required yield on a bond equals its coupon rate, the bond sells at par. When
the required yield on a bond falls below its coupon rate, the bond sells at a premium.

Current yield:

106
The current yield relates the annual coupon interest to the market price. It is expressed as
Current yield = Annual Interest
Price

Ex. A Birr 1000 Bond issued at 12% at par for a period of ten years. Now the market price of
the bond is Birr 950 what is the current yield of
Current yield = Annual interest
Price
= 120
950
= 0.1263
or
12.63 percent.

Yield to maturity
The yield to maturity (YTM) of a bond is the interest rate that makes the present value of the
cash flows receivable from owning the bond equal to the price of the bond. Mathematically, it is
the interest rate (r), which satisfies the equation.

P= C1 + C2__ + C3__ + Cn___ + TV_


(1 + r) (1 + r)2 (1 + r)3 (1 + r)n (1 + r)n
P = Price of the bond
C = Annual interest
M = maturity value
N = Number of years left to maturity
Any time the calculations of bond required the trial and error method to know the rate of interest
which equates the price of bond.

Ex. A bond Birr 1000 is issued at par carrying coupon rate of interest of 9 percent. The bond
matures after 8 years. The bond is currently selling for Birr 800. What is the YTM on this bond?

Given:

107
800 = 90__
90__ + 1000_
(1 + r)t (1 + r)8
= 90 (PVFAr 8 years) + 1000 (PVFr 8 years)

We have to begin with trial and error base.

Let us begin with discount rate of 12 percent.


= 90 (PVFA 12 8 years) + 1000 (PVF12 8 years)
= 90 (4.968) + 1000 (0.404)
= 851.0

This is more than Birr 800 so we may have to try higher value of discount rate. Let us take 14
percent.
= 90 (PVFA14 8 years) + 1000 (PVF12 8 years)
= 90 (4.639) + 1000 (0.351)
= 768.1

The value is less than Birr 800, so let us try at 13 percent.


= 90 (PVFA13 8 years) + 1000 (PVF12 8 years)
= 90 (4.800) + 1000 (0.376)
= 808

Therefore, it lies between 13% and 14 percent.


= 13 + 808 – 800_ x 1
808 – 768.1
= 13 + 8
40
= 13 + .2
13.2%

Ex. An investor purchased a 15% Birr 500 fully paid bond five years back. The current market
price of the bond is Birr 400. Calculate yield to maturity.

Let us begin with 15%

108
= 75 (PVFA15 5 years) + 500 (PVF15 5 years)
= 75 (3.3522) + 500 (.4972)
= 251.42 + 248.60
= 500.08

Since it is greater than 400 we will take 20%


= 75 (PVFA20 5 years) + 5 years) + 500 (PVF20 5 years)
= 75 (2.9906) + 500 (.8333)
= 224.295 + 200.95
= 425.245

Even this is greater than 400. Hence we take 24%


= 75 (PVFA24 5 years) + 500 (PVF24 5 years)
= 75 (2.745) + 500 (.341)
= 205.91 + 170.55
= 376.46
Hence, the YTM lies between 20 – 24
= 20 + 425.24 – 400__ x 4
425.24 – 376.46
= 20 + 25.24_
25.24_ x 4
48.785
= 20 + 2.07%
= 22.07%

Yield to call
As explained earlier is the same unit, some bonds carry a feature that entitles the issuer to call
(buy back) the bond prior to the stated maturity date in accordance with a call schedule (which
specifies a call price for early call date). For such bonds, it is a practice to calculate the yield to
bill (YTC) as well as the YTM.

P=

P = Price
C = Coupon rate of interest

109
m= maturity value ie call price
n= Number of years

The calculation of YTC is also same as YTM and we have to start with trial and error method.

6.6 VALUATION OF PREFERENCE SHARES

Preference shares are hybrid security. They have some features of bonds and some of equity
shares.

Theoretically, preference shares are considered a perpetual security but there are convertible,
callable, redeemable and other similar features, which enable issuers to terminate them within
the finite time horizon.

Preference dividends are specified like bonds. This has to be done because they rank prior to
equity shares for dividends. However, specifications doesn’t imply obligation, failure to comply
with which may amount to default several preference issues are cumulative where dividends
accumulate over a period of time and equity dividends require clearance of preference arrears
first.

Preference shares are less risky than equity because their dividends are fixed and all arrears
must be paid before equity holders get their dividends. They are however, more risky than bonds
because the latter enjoy priority in repayment and in liquidation. Bonds are scurried also and
enjoy protections of principal which is ordinarily not available to preference shares. Investor’s
required returns on preference shares are more than those on bonds but less than on equity
shares.

Since dividends from preference shares are assumed to be perpetual payments, the intrinsic
value of such shares will be estimated from the following equations.

Vp = C_
C_ + C__
C__ + Cn__
(1 + k) (1 + k)2 ( 1 + k)n
Vp = Value of perpetual today
C = Constant dividends received
K = Required rate of return appropriate

110
Vps = D__
Kps

Ex. A preference share of Birr 100 each with a specified dividend of Birr 11.5 per share. Now, if
the investors’ required rate of return corresponding to the risk level of a company is 10%, what
would be the value of share today?

Vps = D_
Kps
= 11.5
.10
= 115.00

Should be required return increase to 12% what would be the value?


Vps = D_
Kps
= 11.50
.12
= 95.83

If the market price of the preference share is Birr 125 what would be the yield?
Vps = D__
Kps
Kps = D_
Vps
= 11.50
125
= 9.2%

6.7 VALUATION OF COMMON STOCK

In case of equity shares, the future stream of earnings or benefits pose two problems. One, it is
neither specified nor perfectly known in advance as an obligation. Resulting this, future benefits
and their timing have both to be estimated in a probabilistic frame work. Two, there are at least

111
three are three elements which are positioned as alternative measures of such benefits namely
dividends, cash flows and earnings.

The valuation of common stock has three methods.


a) zero growth model
b) constant growth model
c) multiple growth model

a) Zero growth model


Under this the assumption is the growth of dividend is zero or constant.

Vc = D
K
Vc = Value of common stock
D = Dividend paid
K = The required rate of return

Ex. A company pays a cash dividend of Birr 9 per share on common share for an indefinite
period of future. The required rate of return is 10% and the market price of the share is Birr 80.
Would you buy the share at its current price?

Vs = D
K
= 9_
.10
= 90
Yes, the price is more than value, you would consider buying the share.

b) Constant Growth Model


The dividend payable to common stock holders will grow at a uniform rate is future. It can be
written as below.

Vc = Do (1 + g)
k–g
Do = Dividend paid

112
g = growth rate
k = desired rate of return.

Ex. Alfa Company paid a dividend of Birr 2 per share on common stock for the year ending
March 31, 2003. a constant growth of 10% per annum has been forecast for an indefinite future.
Investors required rate of return is 15%. You want to buy the share at market price quoted on
July 31, 2003 is stock market at Birr 60 what would be your decision?

Vs = Do (1 + g)
k–g
= 2 (1 + .10)
15 - .10
= 2 (1.10)
.05
= 2.20
.05
= 44
Value is less than price, so you do not buy.

Ex. Nissan Ltd paid a dividend of Birr 4 per share for the ending march 31, 2003. The growth
rate is 10% forever. The required rate of return is 15%. You want to buy the share at a market
price of Birr 80 in stock exchange. What would you do?
Vc = Do (1 + g)
k–g
= 4 (1 + .10)
15 - .10
= 4.40
.05
= 88
Here the price is more than value. Hence, you prefer to buy.

c) Multiple-Growth Model:

113
The multiple growth assumption has to be made in a vast number of practical situations. The
infinite future time period is viewed as divisible into two or more different segments.
The investor must forecast the time ‘T’ up to which growth would be variable and after which
only the growth rate would show a pattern and would be constant. This mean that present value
calculations will have to be spread over two phases viz. one phase would last until time ‘T’ and
the other would begin after ‘T’ to maturity.

Growth Rate1 = D1 – D0
D0
Growth Rate2 = D2 – D1
D1
VT(1) = Dt___
(1 + k)t
VT(2) = DT + 1___
(k – g) (1 + k)T
Combined equation for VT(1) + VT(2)
= Dt___ + DT + 1______
(1 + k)t (k – g) (1 + k)T

Ex. Ethio Power Corporation paid dividend of 0.75 cents per share during the last year. The
company is expected to pay Birr 2 per share during next year. Investors tore cast is a dividend of
Birr 3 per share after that. At this time, the forecast is that dividends will grow at 10% per year
into an indefinite period. Would you buy/sell the share if the current price is Birr 54. The
required rate of return is 15%.

Solution:
This is a case of multiple growth. The growth rates for the first phase must be worked out and
time partition. Growth rates before T are

g1 = D1 – D0
D0

= 2.75
.75

114
= 1.25
.75
= 167%

g2 = D2 – D1
D1
=3–2
2
=1
2
= 50%
VT(1) = Dt___
(1 + k)t
= 2 __ + 3___
(1 + .15) (1 + .15)2
VT(2) = DT + 1____
(k – g) (1 + k)T
= 3.30_________
(.15 – 10) (1 + .15)2
= 3.30___
(.05) (1 + .15)2
= 3.30___
(.05) (1 + .15)2
= 49.91
V0 = VT(1) + VT(2)
= 4.01 + 49.91
= 53.92
The current price is 54 Birr, the share is fairly and priced you can buy it.

Check your progress – I

1. Abebe is considering investment in the equity shares of leader Hindustan Lever Limited
has performed detailed analysis and research into the history and performance of the

115
company. To be sound, what other information should be obtained before taking the final
decision.
………………………………………………………………………………………………
………………………………………………………………………………………………
………………………………………………………………………………………………
2. A 5% Birr 1000 bond has 25 years remaining to maturity. What would be the intrinsic
value of bond today if current market yield is 6.5%. Interest is payable on the bond
semiannually?
………………………………………………………………………………………………
………………………………………………………………………………………………
………………………………………………………………………………………………
3. A 5% Birr 1000 bond paying interest at an annual interval and having 25 years to maturity
is currently selling for Birr 816. it is anticipated that the market yield is likely to decline
5.5%. Estimate the intrinsic value of the bond two years.
………………………………………………………………………………………………
………………………………………………………………………………………………
………………………………………………………………………………………………

6.8 SUMMARY

This unit has discussed in detail the various types of securities, their features, importance and
their uses in financing mix. It is also presented in this unit how value the securities and factors
that influence the price and value of securities. This unit will enable you to calculate the values
of all the securities like bonds, preference stock and common stock.

6.9 ANSWERS TO CHECK YOUR PROGRESS

1. a) Current state of the economy


b) Historical relationship of consummate with aggregate economy

116
c) Historical relationship of HLL to the consummate industry’s performance
2. V = 25 (24.5516) + 1000 (.202)
= 815.90
3. V = 50 (12.875) + 1000 (.291)
= 935.65

6.10 MODEL EXAMINATION QUESTIONS

1. What is a bond?
2. Explain yield to call and maturity
3. What are the formulae for constant growth model of common stock?

6.11 REFERENCES

 Kuchhal S.C. : Financial management, Chaitanya Publishing House Allahabad.


 Pandey IM. : Financial management, Vikas Publishing House Put Ltd.
New Delhi.
 Brigham EF : Fundamentals of Financial Management Dryden Press, Chicago
 Gitman L.J : Principles of Managerial Finance Harper Row, New York.
 Prasanny Chandra: Financial Management Theory and Practice Tata McGraw Hill,
New Delhi.

117

You might also like