Scribd
Upload
31 views2 pages

Code

Conception d'un compteur électrique

Uploaded by

berty sifa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
31 views2 pages

Code

Conception d'un compteur électrique

Uploaded by

berty sifa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

emufambirwi said:

If anyone is interested I was able to achieve this.

You can post your code and results which would be more interesting that just saying it worked.

E
emufambirwi
Member
 Sep 28, 2018


 #6

Diver300 said:
You can post your code and results which would be more interesting that just saying it worked.

Here it is
C:

char incchar;
char incoming[80];
char *result; // command string search result
int i = 0;

void main() {
PORTB = 0;
TRISB = 0; //RB0 input for interrupt
PORTD = 0;
TRISD = 0; //PORTD all output
ANCON0 = 0x00; // Configure PORTC pins as digital
ANCON1 = 0x00; // Configure PORTC pins as digital
ANCON2 = 0x00; // Configure PORTC pins as digital

UART1_Init(9600); // Initialize UART module at 9600 bps


Delay_ms(100); // Wait for UART module to stabilize
Delay_ms(2000);
UART1_Write_Text("ATE0\r\n"); // AT command for Echo OFF
Delay_ms(1000);
UART1_Write_Text("AT\r\n"); // test GSM Modem
Delay_ms(1000);
UART1_Write_Text("AT+CMGF = 1\r\n"); //convert Sim900 module to text mode
Delay_ms(1000);
UART1_Write_Text("AT+CNMI=1,2,0,0,0\r\n"); // setup receiving (now important at this stage)
Delay_ms(1000);

while (1) { // Endless loop


if (UART1_Data_Ready()) { // If data is received,
for (i= 0; i < 80; i++) {
incchar = UART1_Read(); // read the received data,
incoming[i] = incchar;
}
if (result = strstr (incoming, "ON")); // search for string "ON" in incoming and save it in result
if (memcmp("ON", result, 2) == 0)

{
PORTB.F0 = 0x01;

PORTB.F1 =0x01;
}
if (result = strstr (incoming, "OFF")); // search for string "OFF" in incoming and save it in result
if (memcmp("OFF", result, 3) == 0)
{
PORTB.F0 =0x00;
PORTB.F1 =0x00;
}

}
}
}

You might also like