BARCODE LABEL SCALE

SALES OPERATION MANUAL

Pinnacle Technology Corp.

 CONTENT
1 SUMMARIZATION ..................................................................................................................... 1
2 SPECIFICATION ......................................................................................................................... 2
3 ACCESSORIES............................................................................................................................ 2
4 DIMENSION ................................................................................................................................ 3
5 APPEARANCE ............................................................................................................................ 4
6 INSTALLATION .......................................................................................................................... 6
6.1 Install display pole ............................................................................................................................. 6
6.2 Hotkey sheet installation .................................................................................................................... 7
6.3 Paper Installation................................................................................................................................ 8
6.3.1 Label Paper Installation.............................................................................................................. 8
6.3.2 Receipt Paper Installation ........................................................................................................ 10
6.3.3 Linerless Paper Installation ...................................................................................................... 12
6.4 Printer Replacement ......................................................................................................................... 14
7 KEYBOARD LAYOUT ............................................................................................................. 16
8 POWER ON/OFF ....................................................................................................................... 16
9 SALES OPERATION ................................................................................................................. 17
9.1 Calculate by Weight ......................................................................................................................... 17
9.2 Tare Operation.................................................................................................................................. 18
9.3 Calculate by Piece ............................................................................................................................. 20
9.3 Discount ........................................................................................................................................... 20
9.4 Name Input Function ....................................................................................................................... 21
9.5 Change Price .................................................................................................................................... 21
9.5.1 Date .......................................................................................................................................... 21
9.5.2 Permanently Change Price ....................................................................................................... 21
9.5.3 Temporarily Change Price........................................................................................................ 22
10 GENERAL USING KEY ........................................................................................................... 24
11 SOME SIMPLE OPERATION ................................................................................................... 25
11.1 Copy price label ............................................................................................................................... 25
11.2 Print receipt ...................................................................................................................................... 25
11.3 Normal Package ............................................................................................................................... 25
11.4 Package by Fixed weight ................................................................................................................. 26
11.5 Package by Fixed Price .................................................................................................................... 26
11.6 Gift Baskets Function....................................................................................................................... 26
12 FUNCTION SET ........................................................................................................................ 27
12.1 PLU Set ............................................................................................................................................ 27
12.2 System Set ........................................................................................................................................ 29
12.2.1 Edit Menu................................................................................................................................. 29
12.2.2 System set ................................................................................................................................ 36
12.2.3 Report ....................................................................................................................................... 37
12.3 Function Lock .................................................................................................................................. 38
12.4 Lock Scale ........................................................................................................................................ 39
13 COMMUNICATION SETUP..................................................................................................... 39
13.1 Wired Ethernet Setup ....................................................................................................................... 39
13.2 Wireless Ethernet Setup ................................................................................................................... 40
13.3 Making procedure of connector ....................................................................................................... 41
14 Troubleshooting .......................................................................................................................... 42
15 APPENDIX ................................................................................................................................ 45
15.1 Appendix 1: Barcode Coding List .................................................................................................... 45
1 SUMMARIZATION
 Unique and powerful network
1) Apply Ethernet technology, greatly improve data transmission speed.
2) Unique network testing, quickly test network communication.
 Simple and easy to operate
1) You can use single key to sell PLU quickly. Clerk can operate this scale without training.
2) This scale has 112 direct keys (224 hotkeys can be set) and can set hotkeys for most of the
common goods.
 Advanced function and endurance
1) Firmware program can be updated through PC in order to keep advanced and up to date.
2) Flash Rom protection function assures the security of program and source.
3) Keyboard can be cleaned. It resists dirty with great validity.
4) Printer is designed elaborately and not easily subject to paper jam.
5) Barcode rotation can prolong the life of printer head. Printer core can be adjusted according to
label paper.
6) Printer can load 1000 pieces of label paper while other printer can only load 800 pieces of label
paper.
7) There are several package methods (fixed weight, and fixed price). Barcode printer is specially
designed.
8) Piece together function, which can gather several kinds of commodity as required, such as fruit
basket.
9) 12000 pieces of PLU can meet all kinds of demand.
10)Every piece of PLU can be set to use multiple labels.
11)Every piece of PLU can use single barcode format, which resolves the coding problems during
selling.
12)Every piece of PLU can use single metric unit.
13)Numeric unit can be defined by user such as block, package and entries.
14)Sufficient PLU message includes barcode format, live commodity Code and package type and so
on.
15)Label can be printed in rotated position.
16)Support 8 codes, Ean-13 code, and 18 codes and resolve the coding problem of live commodity.
17)Special barcode type for the convenience of live commodity lot management.
18)Support print trace code.
 Convenient, flexible and powerful software support
1) What you see in label designing is what you get. Label size can be selected. Volume of smallest
area can be created according to user. Thus we can decrease cost greatly.
2) International design and supporting worldwide language make it unnecessary to add any accessory.
3) We can adjust the popular commodity at any time and improve the foregrounding working
efficiency greatly.
4) Downloading data can be executed in scheduled time.
5) Background discounts fixedly.
6) Discount in different period of time. Ten discount modes can be defined and each mode has five
periods of time using different discount rate.
7) It supports broadcast downloading.
8) With the function of FTP and TCP/IP. The software supports Unix system and Internet.
9) We can set POS program parameters on PC.
10)Its management is separated into machine, commodity, and hotkey, which make usage of the scale
optimum.
1
11)We can edit and print keyboard sheet quickly with this software.
12)Locking the POS function key can control its operation such as locking discount key and PLU edit
key. Also it offers function to unlock password.
13)It is managed by multi-user and records login information automatically in order to supervision.
14)It offers dynamic link library for the convenience of user’s second development.

2 SPECIFICATION
Model LS2RX LS2CX LS2NX
Display screen 32*264 LCD with backlight 48*112 LCD with backlight 65*132 LCD with backlight
Weighing range 6kg/15kg 15kg 15kg/30kg 30kg
Verification scale
2g/5g 5g 5g/10g 10g
interval
Tare (Max.) -5.998kg -5.995kg -14.995kg -14.990kg
Internal resolution 1/30，000
140 keys（28 function keys，112*2 PLU hot keys）
Keyboard
support quickly edit and download PLU data from PC
Valid printing width 56mm
Paper entry width 61.5±0.5mm
Paper roll diameter Φ90mm MAX
Print speed 120mm/s
LF code, trace code, PLU name, article number, Unit price, price unit, Preservation days,
PLU programming
tare，barcode, department, package weight, package type (Normal, fixed weight, fixed
data
price, both fixed), message 1, message 2, label type, discount hotkey,, additional text
2/5 interleaved, Code128 , EAN13 etc.
Logo, uppercase and lowercase letters
Label format
Self-configured label composing & size, adjustable label length ranging from 30～109mm
Advanced label format: various barcode, PLU name, additional information etc.
RAM：2G, Memory 32 label types
Data storage
12000 PLU, 12000 messages
Optional function WIFI802.11g, linerless label printing
Interface Ethernet, RS232
Power supply AC 110～240V 50～60Hz
Working temperature 0℃～40℃
Dimension 387*433*550mm 380*432*493mm 380*385*174.5mm
Weight (include
9.2kg 8.7kg 8.1kg
package)

3 ACCESSORIES
 Main unit
 Display box
 Disk
 Scale platter
 Product warranty manual
 User manual
 Fuse 1A
 Blank hotkey sheet

2
4 DIMENSION
LS2R:

LS2C:

LS2N:

3
5 APPEARANCE
LS2R:

Display

Power switch

Tray

Printer
Hotkey Function key

Numerical key

LS2C
:

Display

Power switch

Tray

Printer
Hotkey
Function key

Numerical key

4
 LS2N
:
Tray

Power switch Printer

Function key

Numerical

Hotkey

Circumvolve the 4 feet to adjust the level of scale, and make the air bladder into the circle.

Circumvolve the 4 feet to The gradienter is

adjust the level of scale. under the tray.

5
6 INSTALLATION
6.1Install display pole

1. Take out the fix set

Warning:
Do not open the LCD cover
when install the display pole.

2. Mount the display pole.

3. Put on fix set like the picture 4. Put on fix set .Connect the line,
shows. and fix the 4 screws.
6
6.2Hotkey sheet installation
Note: Please refer to “PC software management/Hotkey” in attached CD.
Cut the hotkey sheet down and insert the hotkey sheet into the keyboard. Please take below pictures for
your references:

Cut the hotkey sheet down.

Push up the hotkey pad from

bottom according to the
arrow head.

Insert the hotkey sheet into

the hotkey pad.

7
6.3Paper Installation
6.3.1 Label Paper Installation
Notice: please take the conveying protection bolt down, when you load the paper for the first time.

Conveying protection bolt

(1) Open the side cover (2) Take out the printer, and open the
turnable printing assembly

(4) Insert the release paper to the

(3) Rip off the first several labels.
rewinder

Paper-fixing-block

(5) Roll the release paper in the rewinder axis,

and adjust the paper-fixing-block to fix the roll 8
paper.
 (6) Close the turnable printing (7) Close the side cover
assembly.

1 4

1. Turn the bar outwards, open the turnable printing assembly in the direction shown as the
arrowhead ○,1
2. Please rip off the first several labels, load paper in the direction shown as the arrowhead ○,2,
roll the release paper in the rewinder axis as the direction of arrowhead ○,3 shows.
3. Push the turnable printing assembly to the right position in the direction shown as the arrowhead
○, .4
4. When every five-paper roll is used up, or the labels print unclearly, please clean the printing head
by using cotton dipping cleaning oil or alcohol.

9
 Label Paper
We have two types of label paper: no-gap paper and gap paper

No-gap paper Gap paper（2mm）

The label paper we produced is very suitable for label scale. It is a kind of environment protecting
material has suitable thickness, high sensitivity and low price. We can produce any kind of specification
label paper to match your request. Order easily, dial 86-592-5710087 or log on our company website
www.aclas.tw

6.3.2 Receipt Paper Installation

1. Install the receipt paper-cutter.

2. Open the turnable printing assembly.

10
3. Load the paper like the map shows (directly lead the thermal paper to the paper outlet).

4. Pay attention to adjust the paper-fixing-block until the paper roll is fixed.

Paper-fixing-block

5. Close the turnable printing assembly.

11
 6. Close the side cover.

NOTE: If you use thermal paper instead of label, you should choose ‘RECEIPT’ in ‘System Set’.
Please refer to chapter 9.2 ‘System set’.

6.3.3 Linerless Paper Installation

Note: The linerless paper printing module is different from the receipt and label printing module. If
customers bought was the receipt or label printing module, but now want to replace it to the linerless
paper module, please contact the service department.
Please pre-set the related items when you print linerless paper.
1) Press “System set” for seconds to enter the related setting, and then press key “ ”“ ” till the
LCD display “Gap paper” and choose “Yes”, and then press the key “Print/Enter” to confirm.
2) Press “System set” for seconds to enter the related setting, and then press key“ ”“ ” till the
LCD display “paper type”, please choose “black label”, and then press the key “Print/Enter” to confirm.
2. Load the paper like the map shows
1. Open the side cover and rotatable printing
(directly lead the thermal paper to the paper

12
3. Close the rotatable printing assembly 4. Close the side cover

13
6.4Printer Replacement
If the printer is damaged, you can follow the steps below to replace a new one.
Precaution:
 Before you do the following operations, please cut the power supply first.
 Do not disassemble, assemble or adjust the printer if it is operating satisfactorily. In particular,
do not carelessly loosen the screws holding various parts in place.
 When servicing, be sure not to leave used parts or screws, etc.

1. Demount the damaged printer

Open the printer cover. Pull out the printer

Use a screwdriver to push the latch to the

left side.

14
 Lift up the printer

Pull out the cable

2. Install a new one

Install new printer by following the demount procedure in reverse order.

15
7 KEYBOARD LAYOUT

Note:

1) Press “ ” key for 2 seconds; the scale will adjust the paper’s position automatically; you
yourself can also press it to adjust the paper minitrimly.

2) If the paper’s position is inaccurate after pressing the “ ” key for the first time, pleas press
this key again to relocate the paper’s position.

8 POWER ON/OFF
On/Off with Button
At the first ten seconds after you turn on the scale, the LCD displays from “9” to “0” to enter
self-testing. Please wait and do not press any key, system initialization is going on.

Press On/Off key at the left bottom of the machine after connecting the electricity
Note: do not press any other keys when do self-checking, because it will change the set of the scale
and make the scale doesn’t work.
“On/Off” key is used to turn on or turn off the scale softly. Press this key and hold it for 2 seconds to
turn off the scale, and so as how to turn down it. (Note: this key takes effect by the condition that the plug
has connected and the power switch under the scale is turned on.)

Soft On/Off : Press with 2 seconds.

We suggest that you should use On/Off key to turn On/Off the scale, and do not pull out the power plug
directly if it hasn’t been softly turned down, especially if the scale is under the conditions of connecting
with network or downloading data.PERATION
16
9 SALES OPERATION
9.1Calculate by Weight
There are three kinds of operation. If PLU data is downloaded by background server PC or pre-edited
in the scale, operation follows method 1 or method 2. Otherwise the operation follows method 3.

Notes:
1. AUTO state: On the condition that the weight and the unit are nonzero and after the weight is
steady, a label will be printed. When power on, “AUTO” signal is lighted, which means the scale is in
“AUTO” state. Press “AUTO” key to switch off the state. Suggest making “AUTO” state as default
state.
2. ZERO state: There is nothing on the pan. Press “ZERO” key to let the weight zero and the
“ZERO” signal will be on.
3. Usage of Print key: All of the following operations including Calculate by Weight, Tare
Operation, and Calculate by Piece, Discount, and Change Price are in the “Auto” state. If the default
state is not “Auto” state, the Auto arrow on the LCD won’t be lightening, you must press Print key in
order to print the label.

METHOD 1: HOTKEY OPERATION

Trade example: Some onions weighing 2.000kg are sold . Its hotkey is 01, and price is 0.500$/kg.

ARROW DISPLAY
OPERATION STEP KEY Unit REMARK
Zero Auto Weight Total
price
Ignore this step if
1. Press “ZERO” key to let
Zero 0.000kg 0.00 0.00 the scale is in
the scale return to zero
“ZERO” status.
2. Put the onions 2.000kg
2.000kg 0.00 0.00
on the pan.
3. Input the hotkey 01 of the
onions through PLU 01 2.000kg 0.50 1.00
keyboard

NOTES:
1) There are 224 hotkey. These hotkeys can be changed randomly and be printed in a sheet quickly by
the background PC.
2) The above operation is for the hotkeys from 1 to112. As to hotkeys from 113 to 224, the above
operation step 3 should be changed as follows: Press “SHIFT” key and press the hotkey no. of the
commodity. Other steps are the same.
3) All PLU hotkey could be edited and printed from the PC software.

METHOD 2: General sales steps by inputting LFCODE.

Trade example: Some onions weighing 2.000kg are sold. Their LFCODE is 10, unit price is 1.500$/kg.

ARROW DISPLAY
OPERATION STEP KEY Unit REMARK
Zero Auto Weight Total
price
Ignore this step if
1. Press “ZERO” key to make the
ZERO 0.000kg 0.00 0.00 the scale is in
scale return to zero.
“ZERO” status.
2. Put the onions weighing
2.000kg 0.00 0.00
2.000kg on the pan.

17
 3. Input LFCODE 10 of the
10 2.000kg 0.10 0.2
onions through small keyboard.
METHOD 3: operation for PLU without settings.
Before operation, please do as following:
1. Press the System Set key for 3 seconds till a beep prompts out and press ‘enter’ key to confirm
2.Use “←” “→” to select ‘hardware set ’
3.then use “←” “→” to choose item ‘label select (1~32)’ ,then please input label serial number that have edited
and downloaded on label editor of PC.

ARROW DISPLAY
OPERATION SETP KEY Unit REMARK
Zero Auto Weight Total
price
Ignore this step if
1. Press “ZERO” key to make the
Zero 0.000kg 0.00 0.00 the scale is in
scale return to zero state.
“ZERO” status.
2. Press “SHIFT” & “Name SHIFT
Input”, and then input PLU name Name Input 0.000kg 0.00 0.00
and press “ENTER” to confirm ENTER
3. Input unit price 2.00 through
2 0 0 0.000kg 2.00 0.00
the small keyboard.
4. Put on the commodity
1.000kg 2.00 2.00
weighing 1.0kg.
5. Press key Print Print 1.000kg 2.00 2.00

9.2Tare Operation
It is only applicable to the commodity packed in package or container such as eggs, beans or fruit and
so on.
MOTHOD 1: Operation for commodity separated from container or package.
Trade example: A package of apples is sold. The hotkey of apples is 05, the net weight is 2.000kg and
unit price is 6.000$/kg.

ARROW DISPLAY
OPERATION KEY Unit REMARK
Zero Auto Tare Weight Total
price
1. Put the container
or package weighing 1.000kg 0.00 0.00
1.000 kg on the pan.
2. Press “→T←” key. →T← 0.000kg 0.00 0.00
3. Put a package of
apples weighing 2.000kg 0.00 0.00
2.000kg on the pan.

4. Key in the hotkey

05 of apple through 05 2.000kg 6.00 12.00
PLU keyboard.
5. Take away the
This step is to leave
container and the
the weight-deducting
apples on the tray, →T← 0.000kg 0.00 0.00
state. The arrow of
then press “→T←’
“tare” disappears.
key.
Note: 1 Please refer to the description of “Hotkey making” in software manual which can be seen in the
disk attached.
18
 2 please refer to the “Tare edition and download” in software manual which can be seen in the disk
attached.
METHOD 2: Operation for commodity that its tare weight is known but could not separated from
container or package.
Trade example: A package of apples is sold. The unit price is 6.000$/kg, the tare weight is 1.000kg. The
weight of apple and package is 2.000kg.

ARROW DISPLAY
OPERATION KEY Unit REMARK
Zero Auto Tare Weight Total
price
Ignore this step if
1. Press “→0←” key. →0← 0.000kg 0.00 0.00 the scale is in
“ZERO” status.
2. Input the tare weight
1000 0.000kg 10.00 0.00
through small keyboard.
3. Press “→T←” key →T← -1.000kg 0.00 0.00

4. Put a package of
1.000kg 0.00 0.00
apples on the pan.
5. Key in the hotkey 05
of apple through PLU 05 1.000kg 6.00 6.00
keyboard.
This step is to
6. Take away the
leave the
container and the
→T← 0.000kg 0.00 0.00 weight-deducting
apples on the tray, then
state. The arrow of
press “→T←” key.
“tare” disappears.

METHOD 3: Operation for commodity that its tare weight is known and has been set in software
but could not separated from container or package.
Trade example: A package of apples is sold. The unit price is 6.000$/kg, the tare weight is 1.000kg. The
preset number of tare weight is 1.The weight of apple and package is 2.000kg.
ARROW DISPLAY
OPERATION KEY Unit REMARK
Zero Auto Tare Weight Total
price

Ignore this step

1. Press “→0←” key. →0← 0.000kg 0.00 0.00 if the scale is in
“ZERO” status.
2. Press key “1” from the
small keyboard, and then SHIFT
-1.000kg 0.00 0.00
press “SHIFT” key and →T←
“→T←”key.
4. Put a package of
1.000kg 0.00 0.00
apples on the pan.
5. Key in the hotkey 05
of apple through PLU 05 1.000kg 6.00 6.00
keyboard.
This step is to
6. Take away the leave the
container and the apples weight-deducti
→T← 0.000kg 0.00 0.00
on the tray, then press ng state. The
“→T←” key. arrow of “tare”
disappears.
19
 9.3Calculate by Piece
There are two kinds of operation methods. Method 1 is for hot key sale and method 2 is suitable for
sale by LFCODE.
Note: Set the price unit into PCS/kg in the PC software before taking the following operations.
METHOD 1: Hotkey operation step
Trade example: Ten pieces of cake are sold. The hotkey of cake is 05. The unit is PCS/kg.
ARROW DISPLAY
OPERATION KEY Unit REMARK
Zero Auto Weight Total
price
1. Input the number of the
commodity through small 10 0.000kg 0.10 0.00
keyboard. For example 10.
The LCD returns
to initial state
2. Press “Qty” key. Qty 0.000kg 0.00 0.00
after “Qty” key is
pressed.
3. Press the corresponding hotkey
05 of the cake through PLU 05 0.000kg 3.00 30.00
keyboard.

METHOD 2: general operation step

Trade example: Ten pieces of cakes are sold and the LFCODE of the cake is 12. The unit price is
3.00PCS/kg. The unit is PCS/kg.
ARROW DISPLAY
OPERATION KEY Unit REMARK
Zero Auto Weight Total
price
1. Input the number of the
10 0.000kg 0.10 0.10
Cake 10 through small keyboard.
The unit must
2. Press “Qty” key. Qty 0.000kg 0.00 0.00
be PCS.
LLFCOD
3. Input LFCODE of the cake 12 1
2 E? 12
through small keyboard.
(1-6)
Ignore this step
4. Press “PLU” key PLU 0.000Kg 3.00 30.00 if the LFCODE
has 6 digits.

9.3Discount
The scale supports two kinds of discount: % discount and total discount. This function can be locked by
password which is set and can be randomly changed by background sever PC.
 % discount
Trade example: some peaches give a discount of 95. Its unit is 8.0$/kg and hotkey is 12.
ARROW DISPLAY REMARK
OPERATION KEY Unit
Zero Auto Weight Total
price
1. Input discount proportion
of the commodity 9 5 9 5 0.000kg 0.95 0.00
through numeric keyboard.
The LCD returns to
initial state
2. Press %Discount key. %Discount 0.000kg 0.00 0.00
after %Discount key
is pressed.

20
 3. Put the commodity
weighing 1.000kg on the 1.000kg 0.00 0.00
pan.
4. Key in the corresponding
hotkey of the peaches e.g. 12 1.000kg 8.00 7.60
12.
Notes:
As for step 3 and 4, please refer to the operation of ‘calculate by weight’. You can choose other kinds
of operation such as normal operation or operation for pre-edited PLU to proceed with the above
operation.

 Total discount
ARROW DISPLAY REMARK
OPERATION KEY Unit
Zero Auto Weight Total
price
The LCD
returns to
1. Press key SHIFT &
Total initial state
Total Discount. Input the 0.000k after
SHIFT Discount 0.00 0.00
discount amount 1$, and g
ENTER Total
then press key ENTER.
Discount key
is pressed.
2. Put the commodity
1.000k
weighing 1.000kg on the 8.00 8.00
g
pan.
3. Key in the corresponding
1.000k
hotkey of the peaches e.g. 12 7.00 7.00
g
12.

9.4Name Input Function

This function is used to sell the commodity temporary.
Step 1: Press [SHIFT] key, and then press [Name Input] key.
Step 2: Input the PLU name according to the display screen indicating.
Step3: press ‘enter’ key to confirm (Please take reference to page18: method 3)

9.5Change Price
Change the unit price of a commodity. There are two methods to change the unit price of a commodity,
they are permanently change price and temporarily change price.
9.5.1 Date
Example: the valid date of a cargo is 2013.05.30, now customer wants to modify it to 2013.06.10,
please do the following:
Before modification on scale directly, this cargo’s original valid date has been set on PC before and
please takes reference to chapter 6.7 of PC user manual.
Step 1: put cargo on scale first.
Step 2: Input valid date wanted to extend, number ‘10’
Step3: Press [SHIFT] key, and then press [DATE] key.
Step 4: press PLU hotkey of this cargo.
9.5.2 Permanently Change Price
METHOD 1:
Trade example: The unit price of the apples 4.000$/kg. After changing price, its unit price is 3.000$/kg
21
and the hotkey is 05.

ARROW DISPLAY
OPERATION KEY Unit
Zero Auto Weight Total
price
1. Key the hotkey 05 of the apples via PLU
05 0.000kg 4.00 0.00
keyboard.
2. Long press Price Update key 1.5s. Price Update ? PRICE? 0.00 0.00
3. Key in the new price 3.000$/kg on the 300 ? PRICE? 3.00 0.00
numerical keyboard.
4. Press Print/Enter key. Print/Enter 0.000kg 3.00 0.00
5. Proceed with the normal operation of
0.00
weighing or granular price calculating.

METHOD 2:
Trade example: Some apples are sold. The unit price of the apple is 4.000$/kg, and LFCODE is 900001.
After change the unit price, the unit price of the apple is 3.000$/kg.

ARROW DISAPLY
OPERATION KEY Unit
Zero Auto Weight Total
price
LLFCODE?
1. Long Press Price Update key. Price Update
(1-6)
2. Key in the LFCODE 900001 of the
900001 ? PRICE? 900001
apples through small keyboard.
3. Key in the price changed 3.00/kg. 300 0.000kg 3.00

4. Press Print/Enter key. Print/Enter ? PRICE? 0.00

6. Proceed with the normal operation
of ‘calculate by weight’ or ‘calculate
by piece’.

9.5.3 Temporarily Change Price

1. Long press ‘system set’ key to enter ‘Edit Menu’
2. Enter PLU edit.
3. Input LFCODE(1~6) and press ‘enter’ key
4. Use key [→] or [←] to select “Flag” and press ‘enter’ key
5. Use key [→] or [←] to select ‘YES’ and then press ‘enter’ key to confirm
6. Press ‘Clear’ key to exit to ‘Flag’, press hotkey ‘S and press ‘enter’ key to confirm. And the
PLU is available to change price.
METHOD 1:
Trade example: Some apples are sold. The unit price of the apple is 4.000$/kg, and its hotkey is 10. After
change the unit price, the unit price of the apple is 3.000$/kg. When finish this dealing, it will recover to
the original price 4.000$/kg
Note: before price change operation, please open price change function first.
ARROW DISAPLY
OPERATION KEY Unit REMARK
Zero Auto Weight Total
price
1 Key the hotkey 10 of the
apple via PLU keyboard. 10 0.000kg 4.00 0.00

22
 Prompts
2. Short Press Price key. Price 0.000kg 0.00 0.00 temporarily
change price.
Press ‘enter’ key
and weigh the
3. key in the new price apple, can
3 000
3.0$/kg and press enter 0.000kg 3.00 0.00 automatically
Print/Enter
to confirm. print the apple,
the unit price is
3.00.
5. Press ‘05’ key after finish this operation, and the unit price of the apple is $4.00kg.

METHOD 2:
Trade Example ：The unit price of the cheese is 4.000$/ kg, and LFCODE is 15. Change the unit price of
the cheese as 3.000$/kg. When finish this dealing, it will recover to the original price 4.000$/kg.

ARROW DISAPLY
OPERATION KEY Unit Note
Zero Auto Weight Total
price
1.Short press Price key. Price
2. Put the commodity
weighing 1.000kg on 1.000kg 0.00 0.00
the pan.
3. Key in the LFCODE
15 of the commodity 15 1.000kg 0.15 0.15
via small keyboard.
?Temporarily
4. Press ‘enter’ key Print/ENTER
Change Price?
You can press key
“15” to make sure
5. Key in the new price
3.000 ?PRICE? 3.000 3.00 whether is unit
3.0 $/kg.
price is back to
4.00/kg.

Trade Example 2: Temporarily change the PLU whose initial unit price is 0$/kg, sell with LF-code.
Suppose the initial price of the cherry is 0$/kg, and now temporarily change it as 30.0$/kg, and its
LF-code is 13. When finish this dealing, it will recover to the initial price 0$/kg.

ARROW DISAPLY
OPERATION KEY Unit REMARK
Zero Auto Weight Total
price

1. Put the cherry weighted

1.000kg 0.00 0.00
1kg onto the scale.

PLU with unit

2. Input LF-code 13 via the
13 1.000kg 0.13 0.00 price 0$/kg can’t
numeric keypad.
be sell directly.
3. Press key PLU PLU 1.000kg 0.00 00.00
4. Input the new price
3000 1.000kg 30.00 30.00
30$/kg
5. Press Print key. Print 1.000kg 30.00 30.00

METHOD 3: Temporarily sell the PLU needed to be weighted with PCS.

Trade Example：The unit price of the cabbages is 1$/kg in the morning, and it should be change price as
1$/PCS in the evening to promote it. When finish this dealing, it will recover to its initial price 1$/kg.
23
Suppose a cabbage is 3kg, and its hotkey is 13.

ARROW DISAPLY
OPERATION KEY REMARK
Zero Auto Weight Unit price Total
1. Put the cabbage onto the Sell by PCS
3.000kg 0.00 0.00
scale. now.
2. Input the new price 2.00
2 0 0 3.000kg 2.00 6.00
on the numerical key.
3.Press SHIFT + SHIFT +
3.000kg 0.00 0.00
Comm.Test key Comm.Test
4. Press the hotkey 13 of
the cabbage via PLU 13 3.000kg 2.00 2.00
keyboard.

10 GENERAL USING KEY

Operati
Name Function Note
on
1.usually use to clear unit
price.
2.clear abnormal picture or
C Press key C
error information, and make
the system back to normal
state.
Use to test whether the Press this key one second, if success, after
Comm.Test internet is normal and in “beef” sound, the display will prompts
time to deal with PLU “Normal”. Weighing PLU sales by PCS.
weighing
Select auto print It is on auto print condition
by press shift key， when power-on, and press
Auto Print Automatically print label and cancel the auto print key again to exit
function by press the function.
again
One press can
adjust the paper, When meet the condition
long press will that do not send out labels
send out one or not completely send out
Control the in/out of the paper and the labels during printing, long
paper；to place the labels; scale will adjust press this key to set the
← Input price or other the place of the label again.
B Space information when do PLU label
FEED ↓ edition, press this key can automatically
cancel the last operation. ←
B Space: when
edit PLU, input
the unit price 5,
press this key, the
price will be 5.

24
 This key has searching
function, that is looking for
the related item of the
current field(hotkey 10, Press ←check last
←→ 11).Long press ‘system set’ item, Press
to enter system set, and use →check next item
these two keys to select the
function you want to start
or change.
Price lock key.
Press Price Lock Price Lock key is key for
The price will clear when
can weighing the change, if you want to
weight becomes 0, so press
Price Lock same PLU cancel something, press
LOCK can avoid competing
continuously(PLU this key again.
input the price when do
will not miss)
weighing continuously.

11 SOME SIMPLE OPERATION

11.1 Copy price label
This operation fits for repeat printing the label of the PLU during weighing.
1. Press ‘Copy’ key and press ‘enter’ to confirm;
2. Input the number you want to print and press “Copy” key, then the corresponding number pieces
of label is printed.
3. Press Copy key and input the number and press ‘Copy’ key to print the label you want. If you
want to stop printing, press ‘Clear’ key.

11.2 Print receipt

1. Reloaded the rolling paper and extend its head out of the outlet. Make sure not roll the paper head
in the rewinder. Please refer to Chapter 6.3.2 Receipt Paper Installation.
2. Press the System Set for two seconds and then use “←” “→” to select the item „SYSTEM SET‟
+ ENTER key to enter the system setting state. Use “←” “→” to select “HARDWARE SET”+
Enter key to select “PAPER” +. ENTER key. Use key [→] or [←] to select the paper type as
‘RECEIPT’.
3. Press Enter key to confirm.
Note:
If you want to use label paper again, you should enter this function to select the paper type as
‘LABEL’, and after setting you must restart the scale by press the on-off on the scale’s bottom
(switch to ‘RECEIPT’ no need restart the scale)

11.3 Normal Package

 This is suitable to quickly print label of the same type with different weight.
1. Start up the function of “Auto” and “Price lock” (these two indicator light are lighting)
2.Select PLU or input the unit price.
3.Put the commodity (to be packed) on the pan and the label will be printed automatically.
Note: the 1. Put commodity 1 on the pan
operation of the 2. After the label is printed automatically put commodity 2 on the pan at the
right is suggested same time, take away commodity 1.

25
if you want to 3. Take away the label and stick it on commodity 1. The label of the commodity
operate quickly. 2 will be printed out.
4.Put commodity 3 on the pan and take away commodity 2.
5.Take away the label and stick it on commodity 2, the next label will be printed.
6.Repeat as the above steps to overlap the time of waiting for printing label and
sticking label.
 This is suitable to quickly stick several labels on the packed commodity
1. Open label edit, setup one new No 32 label, that is ‘package label’, the content of the label can be
defined according to your need;
2. Click to download the label;
3. Sell one PLU;
4. Press ‘Shift’ key +‘Package’ key to print corresponding labels (serial number increase after printing
one label; the package label serial number will be calculated newly when newly sell the PLU).

11.4 Package by Fixed weight

Fix weight package, this function is available by setting on PC software first.
For example: pack fish by the fixed weight 0.255kg, and the corresponding hotkey is 38.
Note: Before operate on the scale, please press key Price Lock first, and the indicator light for
‘price lock’ will be lighting.

ARROW Display
OPERATION KEY Unit Remark
Zero Auto Fix Weight Weight Total
Price
1. Put the fish on the
0.255kg 0.00 0.00
pan.
2. Press the hotkey 38 of
the fish via PLU 38 0.255kg 70.00 17.85
keyboard.

Attention: It is the actual weight of the PLU, the unit display the package weight by fixed weight
sale, total price = package weight * actual unit price of the PLU. The commodity can be sold at the
condition that its weight is between the weight tolerance +10%kg while it is in Fixed Weight
package mode. (When the actual weight is below 0.3382 or over 0.3738, the commodity cannot be
sold and the label cannot print.)

11.5 Package by Fixed Price

Fix price package, this function is available by setting on PC software first.

ARROW DISPLAY
OPERATION KEY Fix Unit REMARK
Zero Auto Weight Total
Price Price
1. Put the fish on the pan. 1.000kg 0.00 0.00
2. Press the hotkey 38 of the fish
38 1.000kg 10.00 10
via PLU keyboard.

Attention: It is the actual weight of the PLU, the unit display the package weight by fixed price sale,
total price = unit price of the PLU. The commodity can be sold at the condition that its total price is
between the package tolerance +10%kg while it is in Fixed Price package mode. (When the actual
weight is below 0.95 or over 1.05, the commodity cannot be sold and the label cannot print.)
11.6 Gift Baskets Function
Gift basket function is usually used in the aspect, such as pack gift-box and fruit-dish. Set a hotkey as
26
‘gift baskets’ first on the PC software first.
1. Open PLU manager, set the LFCODE of the “gift basket” as 950002:
Input “Gift Basket” into name column; set unit price as 0; set package type as “package by weight”;
input package weight 0.
For example：Package a fruit-dish (apple, grape, and orange)
PLU name：apple weight unit：kg unit price：10.00 $/kg hotkey 06
PLU name：orange weight unit：kg unit price：4.00 $/kg hotkey 07
PLU name：grape weight unit：kg unit price：20.00 $/kg hotkey 08
Suppose each of the three fruits is 1.000kg.

DISPLAY
OPERATION KEY Unit REMARK
Weight Total
Price
1. Press hotkey 01 After listening long sound
0.000kg 0.00 0.00
‘beep’, enter gift sale mode.
2. Put the apple on the pan,
06 1.000kg 10.00 10.00
and press hotkey 06
3. Put the orange on the pan,
07 1.000kg 4.00 4.00
and press hotkey 07
4. Put the grape on the pan,
08 1.000kg 20.00 20.00
and press hotkey 08

5. Press hotkey 01 01 0.000kg 0.00 Print sum account label.

When the value of the package weight column is 1, every commodity of the basket will print one piece of
label during weighing process, and print one sum account label finally.
Note: Under hand printing mode, press ‘print’ key every time you press hotkey after place the
commodity.
DISPLAY
OPERATION KEY Unit DISPLAY
Weight Total
Price

1.Short press “gift basket” 0.000kg 0.00 0.00

2. Input LFCODE 950002 0.000kg 0.00 0.00

After listening long sound

3. Short press “enter” 0.000kg 0.00 0.00
‘beep’, enter gift sale mode
4. Put the apple on the pan, and Automatically print apple
06 1.000kg 10.00 10.00
press hotkey 06 sale label
5. Put the orange on the pan, and Automatically print apple
07 1.000kg 4.00 4.00
press hotkey 07 sale label
6. Put the grape on the pan, and Automatically print apple
08 1.000kg 20.00 20.00
press hotkey 08 sale label
7. Press “gift basket” 0.000kg 0.00 Print sum account label.

12 FUNCTION SET
12.1 PLU Set
Notes: This operation can be locked by password that is set in background PC changed randomly.

27
 PLU Input
1.Press PLU key and release it till a beep prompts out . The display shows “LFCODE”, it means
the system is in the state of editing PLU.
2. When the display prompts “LFCODE?”, and presses Enter to confirm. Then the display shows
“NAME” and enter editing items: N/L/C/P/U/F/T/B/D/W/Y/M/G/I/R/S, you can use key ← and →
to choose the item you want to edit, then press Enter.
3. Press Enter key. Input the corresponding data by sequence. Refer to the following notes.
4. Press S or Enter to save the above operation.

NOTES: the following is the sequence of PLU data input. When one item is input, press Enter to
confirm. The system will shift to another item, and press Enter again to enter it. If no contents are
inputted, press ESC to exit.

1) L---LIFCODE: select LIFCODE from(1-6)

2) N---PLU NAME, NAME2, NAME3 : Input PLU name not exceeding 36 characters directly through
keyboard. And through the numeric keyboard input the code of the input characters. The code is in
the word stock table.
3) C---PLU CODE: Input PLU code within 10 digits.
4) P---UNIT PRICE: Input PLU price.
5) L---LIMIT MAX SCALE PRICE: set max scale price
6) U---UNIT: Select price unit from g, 10g, 100g, kg, Lb and Oz or PCS (g), PCS (kg), PCS (Lb) and
PCS (Oz).
7) F---SHELF: Input the shelf-time of PLU: period from 0 to 365---means its unit is ‘day’; period from
1000 to 9999---means its unit is ‘hour’. e.g. input 60, which stands for its shelf-time is 60-day; input
1006, which means its shelf-time is 6-hour.
8) V-VALID DAYS---to set valid days for goods.
9) T---TARE WEIGHT: Choose tare weight mode (normal, weight, table)
10)B---BAR CODE, BARCODE2 : Select bar code type from 1 to 99.
11)D---DEPARTMENT: Input department code from o to 99.
12)G---GROUP: select group number from o to 99.
13)O---ORIGIN: set origin number from 0-500
14)W---PACKING WEIGHT: Input the package weight.
15)Y---Packing Type: Use key “←”“→”to select (Normal; fixed weight; fixed price; both) weight and
price.
16)R---RANGE: set PLU range scope
17)T---TEXT1 .TEXT2,TEXT3,TEXT4,TEXT5,TEXT6,TEXT7,TEXT8
18)I---LABEL SELECT (Set label of corresponding PLU) Use key “←”“→”to select (DEF, D0,
D1,D0D1).
19)D---DISCOUNT: choose discount mode (normal.rate,table)
20)P---PRODUCT DATE: set product date
21)F---FLAG: set flag contents
22)DISCOUNT 1/2 PLU
23)DISCOUNT 1/4 PLU
24)H---HOTKEY: set hotkey
25)R---Set PLU discount (-10~125).
26)S---Save PLU revision.

 PLU Data Revise

1. Press PLU key for two seconds. The display shows “PLU EDIT”, it means the system is in the state of
editing PLU.
2. Key in LFCODE when the display prompt “LLFCODE?”, and press Enter to confirm. Then the display
28
shows “NAME” and enter editing items: N/L/C/P/U/F/T/B/D/W/Y/M/G/I/R/S, you can use key ← and
→ to choose the item you want to edit, then press Enter.
3. Key in the corresponding letter of the item to be modified, refer to the above notes, for example, key in
N to modify name and P to modify price.
4. Input the new information.
5. Press S key to save the above results. Else they are abandoned.

12.2 System Set

Note: This operation can be locked by password set in background PC server and is changeable as
will.
12.2.1Edit Menu
1. Press the System Set key till a beep prompts out
2.Use “←” “→” to select ‘Edit Menu ’
3. Press Enter key to confirm

NOTES: the following is the sequence of edit menu. When one item is input, press Enter to confirm. The
system will shift to another item, and press Enter again to enter it. If no contents are inputted, press ESC
to exit.
NOTES: the following is the sequence of edit menu. When one item is input, press Enter to confirm. The
system will shift to another item, and press Enter again to enter it. If no contents are inputted, press ESC
to exit.
Notes:
1. P---PLU EDIT :to edit PLU information here
2. T---TARE EDIT: to set certain tare information by inputting the corresponding index number
3. D---DISCOUNT: to set certain discount information by inputting the corresponding index number
4. EDIT MESSAGE (NOTE1): Input LLFCODE, and then edit message
5. INGREDIENT (NOTE2) EDIT: Input LLFCODE, and then edit ingredient
6. EXTRA MESSAGE (NOTE3) EDIT: Input LLFCODE, and then edit extra message
7. NOTE4---edit the information you want.
8. D---DEPARTMENT: to set certain department information by inputting the corresponding index
number
9. G---GROUP: to set certain group information by inputting the corresponding index number
10. L---LCD ADVISE EDIT
11. H---HEAD EDIT: to edit head message information
12. T---TALL EDIT: to edit tall information
13. N---NUTRIENT FACTS TABLE EDIT: to edit nutrient facts information by inputting PLU index
14. I---INGREDIENTS FACTS EDIT: to set nutrient facts information by inputting the corresponding
index number
15. P---PRINT PLU LFCODE: set PLU LFCODE printing

PLU EDIT

1. Press the System Set key till a beep prompts out

2.Use “←” “→” to select ‘Edit Menu ’ and press ‘enter’ key to confirm
3. Use “←” “→” to select ‘PLU EDIT’ and press Enter key to confirm
In this section, you can set your PLU information.
1) Input LFCODE number and press ‘enter’ key to confirm
Press ‘enter’ key
29
 2) Input ‘NAME’ and press ‘enter’ key to confirm

Press ‘enter’ key

3) Input ‘NAME 2’and press ‘enter’ key to confirm

Press ‘enter’ key

4) Input ‘NAME 3’and press ‘enter’ key to confirm

Press ‘enter’ key

5) Input ‘PLU CODE’ and press ‘enter’ key to confirm

Press ‘enter’ key

6)Input ‘UNIT PRICE’ and press ‘enter’ key to confirm

Press ‘enter’ key

7)Input ‘LIMIT MAX SALE PRICE’ and press ‘enter’ key to confirm, you can switch
digits by pressing numerical key ‘0’.
Press ‘enter’ key

8) Input ‘UNIT’ of PLU and press ‘enter’ key to confirm(press ‘→←’ key to select unit
price kg; g, 10g; 100g, 50g; ounce; pound; 500g; TaiWan Jin; press ‘enter’ key to confirm.).

Press ‘enter’ key

9) Choose ‘TARE WEIGHT’mode (1 Normal. 2 Table) and press ‘enter’ key to confirm.
Press ‘enter’ key

10) Input ‘Tare’ and press ‘enter’ to confirm.

Press ‘enter’ key

11)Input ‘BARCODE’, then press ‘enter’ to confirm.

Press ‘enter’ key

12)Input ‘BARCODE2’ and set barcode ,then press ‘enter’ to confirm.

Press ‘enter’ key

13)Input ‘DEP（0-99）’number，then press ‘enter’ to confirm.

Press ‘enter’ key

14)Input ‘PACKAGE WEIGHT’ ,then press ‘enter’ to confirm.

Press ‘enter’
30 key
 15) Use ‘→←’ key choose ‘PACKAGE TYPE’ mode(1 Normal; 2Fixweight; 3 FixPrice; 4
Both fix) and press ‘enter’ key to confirm.
Press ‘enter’ key

16)Input acceptable ‘RANGE’ and then press ‘enter’ to confirm.

Press ‘enter’ key

17)Input the information of ‘TEXT1 ,2 ,3 ,4 ,5, 6,7 ,8’ and then press ‘enter’ to confirm.
Press ‘enter’ key

18)Set ‘LACK LABEL’ number and press ‘enter’ to confirm.

Press ‘enter’ key

19)Input ‘LABEL SELECT ’number and press ‘enter’ to confirm.

Press ‘enter’ key

20) Set ‘DISCOUNT’ information, use ‘→←’ key to choose discount mode (1 Normal, 2 Rate,
3 Table) and then press ‘enter’ to confirm.
Press ‘enter’ key

21)Set ‘SHELF’ and then press ‘enter’ key to confirm

Press ‘enter’ key

22)Input ‘VALID DAYS ’of PLU and then press ‘enter’ key to confirm
Press ‘enter’ key

23)Input ‘group（0-99）’ number，then press ‘enter’ to confirm.

Press ‘enter’ key

24)Input ‘PRODUCTION DATE’，then press ‘enter’ to confirm.

Press ‘enter’ key

25)Input ‘origin（0-500）’number，then press ‘enter’ to confirm.
Press ‘enter’ key

26)Input ‘PRODUCT DATE’(YYYYMMDDhhmm), Y: year; M: month; D: day; h: hour; m:

minute, input the date according to aboved format, then press ‘enter’ to confirm.
Press ‘enter’ key

31
 27)Input discount rate one by one when do the operation of ‘DISCOUNT 1/2 PLU’ or
‘DISCOUNT 1/4 PLU’，then press ‘enter’ to confirm.
Press ‘enter’ key

28)Set ‘FLAG’, to confirm whether the information of the PLU you edit will print out on the
final label. (It contains ‘TEXT1---TEXT8’ message/sale message/ingredients/product date/ pack
time/shelf day/price change/shelf column (count by day or time) No: by daytime Yes; by time/shelf time/
limit sale price)

Egg: sale message? Select (1 YES; 2 NO), use ‘→←’ to select YES or NO, and then press
‘enter’ to confirm. After finishing the deal, the ‘sale message’ will be print out on the PLU label. If you
want to enter the next item ‘ingredients’, press ‘→←’ key.
Press ‘enter’ key

29)After edition, select ‘save’ (the edition information will be saved after this operation), and
press ‘enter’ key to confirm, use ‘→←’ key to find the save menu or use shortcut (hotkey ‘S’ on the right
side) to choose the save menu.

After finishing the edition, back to the Link Edition, to make the label for the information you want to
print out on the label and upload to the scale. Then, the sold PLU will be print out at the format of the
label edit via LINK. Check the PC software management for the details

32
 Press ‘download’key to send label to scale

TARE EDIT

1. Long press the System Set key till a beep prompts out
2.Use “←” “→” to select ‘Edit Menu ’and Use “←” “→” to select ‘TARE EDIT’
3. Input ‘index’ number , Eg: input INDEX 1 and press ‘enter’ to confirm
4 . Press ‘enter’ to confirm
If you want to quit edition, please press ‘ESC’ to exit edition interface and you can input index number to
check the information you have set.

DISCOUNT

1. Long press the System Set till a beep prompts out

2.Use “←” “→” to select ‘Edit Menu ’
3. Press Enter key and Use “←” “→” to select ‘DISCOUNT’ and press ‘enter’ to confirm

The interface then will prompts “DISC 1”(happy time 1 on PC manual, please take reference to
chapter 6.4) and you can change to DISC 2 and DISC 3(happy time 2, happy time 3)by pressing “←”
“→” key.
We here take DISC 1 edition for example:

33
 Display steps
INDEX Pressing ‘enter’key and input index number
DISC1 Pressing ‘enter’key to enter discount edit
?0:OFF 1:ON? Choose type1（Price*discount %+ )and press ‘enter’ to confirm
‘?TYPE?’ Input corresponding number from number 0 to number 9. Eg, unit
price %+, directly input 1 and press ‘enter’ to confirm
‘?MIN TOTAL ?’ Input‘MIN TITAL’ value（pressing “0”to switch decimalpoint )and
press enter to confirm
‘?MAX TOTAL?’ Input‘MAX TITAL’ value（pressing“0”to switch decimalpoint )and
press enter to confirm
‘?MIN WEIGHT?’ Input‘MIN WEIGHT’ value（pressing“0”to switch
decimalpoint )and press enter to confirm
‘MAX WEIGHT?’ Input‘MAX WEIGHT’ value（pressing“0”to switch
decimalpoint )and press enter to confirm
‘0:PERIOD 1;TIME?’ Choose discount time 0:PERIOD 1;TIME .digit 0 means the cargo
will be in discount in certain period and digit 1 means discount in
certain time
?START(YYYYMMDDhh Input discount starting time in the form of YYYYMMDDhhmm
mm)
?END(YYYYMMDDhhm Input discount ending time in the form of YYYYMMDDhhmm
m)
?DISCOUNT? Input discount rate and press ‘enter’ key to confirm

Then, the discount 1 is finished and the interface will change to DISC2 edition automatically.
Then, please enter PLU EDIT section to confirm if you want to save the above discount information

Edit Message (NOTE1)

Please take your reference to chapter 6.1.8 on PC manual

1. Long press the System Set key till a beep prompts out
2.Use “←” “→” to select ‘Edit Menu ’and press ‘enter’ key to confirm
3. Use “←” “→” to select ‘Sale Message Edit( NOTE1)’ and press ‘enter’ key to confirm

Eg:
Display steps
?LFCODE? Input live code and press ‘enter’ key to confirm
?line1 ...line8? Input the information of line 1 to line 8 and press enter key, Use “←” “→”
to swift the edition from line 1 to line 8
?Save? Press ‘enter’ if you want to save the information you have set

INGREDIENTS (NOTE 2) EDIT

1. Long press the System Set key till a beep prompts out
2.Use “←” “→” to select ‘Edit Menu ’
3.Use “←” “→” to select‘NOTE2 Edit’ and press ‘enter’ key.
4. Input ‘LF CODE?(1-6)” and press ‘enter’ key
5. Input the information you want to set on “line1 to line8” and press enter key for final
confirmation.
6 , if you want to ignore, please press “←” “→” to find ‘save’ word to save information
34
EXTRA MESSAGE (NOTE 3) EDIT

1. Long press the System Set key till a beep prompts out
2.Use “←” “→” to select ‘Edit Menu ’
3. Use “←” “→” to select‘NOTE3 Edit’ and press ‘enter’ key.
5. Input ‘LF CODE?(1-6)” and press ‘enter’ key
5. Input the information you want to set on “line1 to line8” and press enter key for final
confirmation.
6 , if you want to ignore ,please press “←” “→” to find ‘save’ word to save information

NOTE4 EDIT

1. Long press the System Set key till a beep prompts out
2.Use “←” “→” to select ‘Edit Menu ’
3. Use “←” “→” to select ‘NOTE4 Edit’ and press ‘enter’ key.
6. Input ‘LF CODE?(1-6)” and press ‘enter’ key
5. Input the information you want to set on “line1 to line8” and press enter key for final
confirmation.
6 , if you want to ignore ,please press “←” “→” to find ‘save’ word to save information

DEPARTMENT

1. Long press the System Set key till a beep prompts out
2.Use “←” “→” to select ‘Edit Menu ’
3. Use “←” “→” to select ‘department’ and press ‘enter’ key.
4. Input index number and press ‘enter’ key.
5.LCD displays’ NAME’ ,please input name ,for example ‘apple’
6.Press ‘enter’ to confirm

GROUP

1. Long press the System Set key till a beep prompts out
2.Use “←” “→” to select ‘Edit Menu ’
3. Use “←” “→” to select ‘group’ and press ‘enter’ key.
4. Input index, for example ,input ‘1’
5.LCD displays’ NAME’ ,please input name ,for example ‘group 2’
6.Press ‘enter’ to confirm

LCD ADVISE EDIT

1. Long press the System Set key till a beep prompts out
2.Use “←” “→” to select ‘Edit Menu ’
3. Use “←” “→” to select ‘LCD Advertise Edit’ and press ‘enter’ key.
4. Input index, for example ,input ‘1’

35
HEAD & TALL EDIT

1. Long press the System Set key till a beep prompts out
2.Use “←” “→” to select ‘Edit Menu ’
3. Use “←” “→” to select ‘Head/Tall Edit’ and press ‘enter’ key.
4. Input index line information one by one
5. Press ‘enter’ to confirm

NUTRIENT FACTS TABLE EDIT

1. Long press the System Set key till a beep prompts out
2.Use “←” “→” to select ‘ Edit Menu ’ and press ‘enter’ key.
3.Input index number---ingredients name---daily usage---ingredients unit
4.Choose? % daily value? 0;: input 1: account
5. Choose ?ingredient other element ?0: no; 1: yes
If you want to check the information of the ingredients, back to the ‘ingredient edit’ item and input the
corresponding index number.

NUTRIENT FACTS EDIT

1. Long press the System Set till a beep prompts out

2.Use “←” “→” to select ‘ingredients edit’ and press ‘enter’ key.
3.Input LFCODE---Description---Supply Message---Supply Rate
4.Press ‘enter’ key to confirm

PRINT PLU LFCODE

1. Long press the System Set key till a beep prompts out
2.Use “←” “→” to select ‘PLU Print LFCODE Set’ and press ‘enter’ key.
3.Press Enter key for ‘nutrient facts table edit’ and press ‘enter’ key.
4.? Start LFCODE?: input start LFCODE
5. ?End LFCODE?: input end LFCODE
6.Press enter to save

12.2.2System set

Hardware set

1) LCD Contrast(0-99)
Press ‘system set’ key ---use “←” “→” to select ‘system set’---hardware set --- ‘LCD contrast’----use
“←” “→” to deduct or add time value---press ‘enter’ to save information.

2) Auto Refurbish Time

Press ‘system set’ key ---hardware set ---use “←” “→”to find ‘auto refurbish time’----LCD refurbish
time----input time you want to set----press ‘enter’ to save information

3) DATE
Press ‘system set’ key ---use “←” “→” to select ‘system set’---hardware set --- ‘DATE’----input date
36
in the form of ‘YYMMDD’---press ‘enter’ to save information.
Y: year M: month D: day H: hour m: minute
For example: 1210131230 2012Y10M13D12H30m

4) ALIGN
Press ‘system set’ key for 3 seconds---hardware set --- ‘ALIGN’----use “←” “→” to deduct or add
time value---press ‘enter’ to save information.

5) LABEL SELECT(1-32)
Press ‘system set’ key for 3 seconds------ hardware set ----LABEL SELECT (1-32)----input label
number (from 1--32---press ‘enter’ to save information.

6) Paper
Press ‘system set’ key for 3 seconds------ hardware set ----paper----choose label type (label, receipt, no
rewind, black mark label)---press ‘enter’ to save information.

7) LCD SLEEP TIME

8) Press ‘system set’ key for 3 seconds------ hardware set ---- LCD SLEEP TIME----use “←” “→”
change value---press ‘enter’ to save information.

9) Printing speed
Press ‘system set’ key for 3 seconds------ hardware set ----speed----use “←” “→” change speed
value(50.55.60.65.70.75)

10) AUTO FEED SET

Press ‘system set’ key for 3 seconds------ hardware set ----AUTO FEED SET----choose feed
modes(NORMAL, PRE PRINT,PRE FEED)

11) PRINT TEST PAGE

Press ‘system set’ key for 3 seconds------ hardware set ----PRINT TEST PAGE----choose ‘YES OR NO’

Network Set

1 INTERNET PROTOCOL (TCP/IP)

2 SERVER IP
3 ENABLE NETWORK PRINTING
4 Use “←” “→” key to select ENABLE NETWORK PRINTING
And press enter, then use “←” “→”open or close online trace.

Parameter Set

1）SOURCE PRICE
2）Decimal point in quantity column
3）CURRENCY PLACE
4）FLOATING VENDER
5）ZERO UNIT PRICE PRINT
6）ANTI WIND
7）Stat Warnning
8）rebate to 23 department
9）PRE TARE
37
10）HANDLE TARE
11）None Weight can Print
12）PRINT ITEM IN WEIGHT ITEM
Use “←” “→” key to choose the item you want to set and press enter to confirm.
12.2.3 Report
1. Long press the System Set key till a beep prompts out
2.Use “←” “→” to select ‘Report’
3. Press Enter key to confirm;
NOTES: the following is the sequence of menu. When one item is input, press Enter to confirm. The
system will shift to another item, and press Enter again to enter it. If no contents are inputted, press ESC
to exit.
Notes:
1. promoter report: Input promoter number to print report.
2. Z DEPT. REPORT
3. X DEPT. REPORT
4. Clr Stat
5. Prn ALL Stat. PLU
6. Prn Subtot: Press [Enter] to print the label
7. Stat. mode: Whether to set the system in stat. mode. Use arrow key to select “YES” or “NO”.
a) If you choose “YES”, the system will be in stat. mode, when you use the hotkey, the sale subtotal of
this key will be printed on label. And if you choose “NO”, you can do hotkey operation as normal.
8. CLEAR PLU REPORT
9. Z PLU REPORT
10. X PLU REPORT
11. Z GROUP REPORT
12. X G ROUP REPORT
13. P---PRN SUBTOT: Press [Enter] to print the label
14. P---PRN ALL STAT. PLU
15. Z---Z GROUP REPORT
16. C---CLR STAT
1) Promoter report
Press ‘system set’ key for 3 seconds----report----promoter report----NO.(1-8)----input number (1-8)
4) Stat. mode
Press ‘system set’ key for 3 seconds------report------Stat. mode-----NO.(1-8)----choose ‘yes or no’
5) PRN.SUBTOT
Press ‘system set’ key for 3 seconds------report------PRN. SUBTOT
6) PRN ALL STAT.PLU
Press ‘system set’ key for 3 seconds------report------PRN ALL STAT. PLU
7) Z GROUP REPORT
Press ‘system set’ key for 3 seconds------z group report
8) Clr Stat
Press ‘system set’ key for 3 seconds------Clr Stat ( this operation will clear all sale records)

12.3 Function Lock

PLU edit, Discount Program and tare functions can be locked by password and password of each
function is independent and changeable. Password is set by background PC server and downloaded to
every scale.
Operation on the label scale is as followings:
Note: Once you turn on the locked function, this function will be valid until the scale is warmly
38
closed.
1. Turn on the scale.
2. Select the desired function key.
Press PLU key for two second to enter PLU editing state, the system prompts to
input password, then input the safe password which is set by background PC server.
Press System Set key for one second to enter program setting state, the system
Turn on the
locked prompts to input password, then input the safe password which is set by background
function PC server.
Press Tare key for one second to enter tare state, the system prompts to input
password, then input the safe password which is set by background PC server.
Press Change Price key for one second to enter change price state, the system
prompts to input password, then input the safe password which is set by background
PC server.
Lock these 1. Press On/Off key for two seconds to warmly close the scale.
functions
again. 2. Press On/Off key to open the scale.

12.4 Lock Scale

You can lock the scale by password, so that other people can’t do any operation on the scale.
Lock scale as the following method:
1. Press SHIFT and then Password key until the word “PASSW” appears on the
LCD display.
Lock the
2. Input the eight-digit password by numeric keyboard.
scale
3. Press SHIFT and then Password key and after hearing a “beep” sound to show
the password has been set.
1. Turn on the scale.
Turn on the
lock 2. The LCD display “PASSW”.
casually 3. Input the eight-digit password, then press SHIFT, then Password key to turn on
the lock.
1. Turn on the scale.
2. Press CL key.
Turn on the
lock 3. Press SHIFT, then Password key for two seconds until the word “PASSW”
timelessly appears on the LCD display.
4. Input the eight-digit password, then press SHIFT, then Password key to turn on
the lock.

39
13 COMMUNICATION SETUP
13.1 Wired Ethernet Setup
Barcode scale, Ethernet contains PC and several scales, every scale connect Ethernet via HUB. As
follows:

Etherne
t

TO
PC

NETWARE
WINDOWS
UNIX
POS

PC
POS1 POS2

Ethernet IP Address set:

1. The division of the Ethernet IP address is by professional person, and the IP address of workstation is the same as
the scales (the first nine digits are the same). Any workstation under the same segment install link65 can make
communication test to the scales under the same segment.
2. Refers to “System Set”---‘IP Address Input’ from the attached disk to input the IP to the scales.
Communication Line Setup Requirements:
1. Consider the installation of the communication line setup when install label scale. Internet installation
had better be done during install local pipeline. Communication line use 8core Ethernet communication
cable to make sure the wire rod is under low impedance.
2. The installation of the line should avoid interference source, such as air compressor and high-power
electricity appliance, and avoid to install alongside the high current power line, and use metal sheath to
shield.
3. The sheath is need to protect the communication line, PVC or metal sheath are available, use metal
sheath under strong electromagnetic interference and connect the metal to the floor to shield.
4. The place for barcode scale should be away from humidity environment, junction box should pay
attention to damproof.
5. The whole length of the wire should not beyond 100m, use standard A line connect way or B line
connect way, one system use one connection method.

40
13.2 Wireless Ethernet Setup
If you purchase the wireless scale, you can use wireless Ethernet setup method to set up the
communication network.

41
13.3 Making procedure of connector
(1) Select a connector wire (8 pin) by length of L.

(2) Put A end of the connector wire at the edge of blade of pliers
horizontally (note: point against the baffle to ensure 12mm
peeling length), press the pliers and pull out the wire and the
peeling length is about 12mm.

1.Connection order:
green/white, green, orange/white, blue, blue/white
orange, brown/white, white.
2. line Connection order:
orange/white, orange, green/white, blue, blue/white,
green, brown/white, white.
Protruding strip Edge of cut blade

Edge of peeling blade

(3) Plug peeling end (A) into 8 PIN PHONE connector as

either Connection order above.
Make sure to plug to the end.

(4) Plug wire connector with 8 pin into the position with logo 8P
of pliers gently, then press the pliers forcefully.

(5) When process end B of connecting wire, don’t twist

wire and keep the wire with same color in the same position.

42
14 Troubleshooting
The scale breaks down:
1. There is no sound and no display but backlight when power is on.
Reason: Electric sparkle caused by power plugging in and pulling out destroys the ROM program in the
main board.
Treatment: Change main board, reset sequence number and download all records.
2. There is no sound and displaying ‘UPDATE’ when power is on.
Reason: The same as the above.
Treatment: Download POS program to the scale again.
3. Buzzer sounds continuously and the displaying characters bounce.
Reason: The same as the above.
Treatment: The same as the above.

Question about print:

1. Paper location is normal but the printed out label is blank.
Reason: Label type sets error. It is required label type printed out by the scale should be consistent with
which downloaded from PC. Otherwise the label printed out will be blank.
Treatment: a. Adjust the scale according to the following sequence.

Enter system Enter label type Select label type

Function set selection as D0 by arrow
System set L → Enter

b. Also we can adjust the software with PC. Open link 65, input serial number of the scale,
run command function set and download this function set to the scale.
2. Printer spits out half paper or one and a half papers and paper locates abnormally.
Reason: a. Paper type sensor set error
b. Printer back photoelectric group is in wrong direction or covered by dust.
c. Photoelectric board is bad.
d. Photoelectric group of back photoelectric is bad.
Treatment: a. According to the following sequence, adjust the scale.

Enter system Enter paper Select paper type as

Set function sensor selection ‘Label’ with arrow
System set S → Enter
set
We can also make software adjustment on computer. Open ‘Link65’, set paper type as ‘Label’ in
function set; download the set to the scale.
b. Check whether the back photoelectric group is gradient or covered by dust.
c. If it can’t be resolved yet it is necessary to exchange back photoelectric group, which had
better be handled by the professional of our company.
3. Label out of printer is obscure and not dark enough.
Reason: a. Printer header is not put well.
b. Hot sensor head is dirty.
c. It is necessary to carry on voltage learning.
Treatment: a. Place printer header in suitable position
b. Clean the thermal printer with soft tissue or swab (no hard stuff, like knife), if not clean
enough, please clean it with fine dried cloth dipped in little alcohol in shutdown mode.
4. Label printed out is half clear and half blur even blank.
Reason: a. Printer header is not put well.
b. Hot sensor header is dirty.
c. Printer header is distorted.
43
Treatment: a. Place printer header in suitable position.
b. Clean the thermal printer with soft tissue or swab (no hard stuff, like knife), if not clean
enough, please clean it with fine dried cloth dipped in little alcohol in shutdown mode.
（Please refer to the demonstration below.）
c. If this problem can’t be resolved yet it is necessary to change the printer. The bad printer
had better to be handled by professional of our company.

 Demonstration for cleaning the thermal printer head:

Clean the thermal

printer head with
soft tissue or swab

① Open the thermal printer head ② Clean the thermal printer head.

5. There is strange letter on the label.

Reason: LFZK has not been downloaded.
Treatment: Download LFZK again.

Questions about keyboard:

1. Display is normal but keyboard sounds continuously.

Reason: There is a short circuit in keyboard.
Treatment: change keyboard circuit.
2. Key doesn’t sound.
Reason: a. Key wire is not inserted well.
b. Electric rubber of key press circuit board is not installed well.
c. The replaced kit is bad.
Treatment: a. Check key wire and insert it again.
b. Remove the electric rubber of key press and another location with rubber strip install again.
c. If the problem can’t be resolved yet, the selected kit is bad.

Questions about weighing:

1. The scale can’t weigh correctly.

Reason: a. Rubber pad, which sustains the scale pan, touched the shell (upper cover).
b. Humidity or component aging or area difference makes the scale weigh incorrectly.
c. Sensor is damaged by over loading.
Treatment: a. Check whether the upper covers are buckled well. If they still knock each other, install
sensor sustainer again.
b. Study zero weight and full weight again. If it is still no use, change main board, OP board or
even the sensor.
c. Change sensor and sustainer.
44
 Note: OP board and sensor should be returned to our company in principal if they can’t be used.

2. Zero state is not stable.

Reason: a. It is affected by environment such as vibration, or magnetic field interference, or wind.
b. Weighing circuit is affected with damp.
Treatment: a. Remove interference.
b. Change main board.
c. If the problem can’t be resolved. Return the whole scale to our company to repair.

3. The scale can’t weigh.

Reason: Main board or OP board or sensor is bad.
Treatment: a. Change main board.
b. Check whether OP board is abnormal. Return the whole scale to our company.

Questions about communication:

1. The scale can’t communicate.
Reason: a. Communication port set error.
b. Serial number of the scale has not been set.
c. Connecting head is not used correctly or Netware wire is obstructed.
d. There is some wrong with power board or main board.
Treatment: a. Confirm the correct communication port.
b. Confirm number set in Link65 is consistent with the number in the scale.
c. Confirm the Netware wire is smooth and communication connecting header is used
correctly. There are two types of communication port RS-232 which uses 9-pin or 25-pin
connecting port attached with the scale and RS-422 which uses RST-11A connecting head.
d. If the above are right, detect whether main board or power board is wrong and change the
wrong main board or power board.
2. Downloading is stopped at 1/N (n represents some number) and computer shows message
“communicate error!”
Reason: Main board is error, which may be caused by chip damage.
Treatment: Change main board or chip (ROM).

Question about display:

Display can’t show all characters or even a character.
Reason: a. Display pole has not been installed well, which causes the display and the machine in bad
contact.
b. Water flows into the base seat of display pole which makes link board short-circuit or rotten.
c. Display is damaged.
Treatment: a. Install display pole and fix the bolt.
b. Change link board or display pole.
c. Change display pole.

Other question:
Roll paper can’t be driven by print.
Reason: maybe roll paper doesn’t get well along with rotating axis. Or there is some matter with
rotating axis.
Reason: Maybe roll paper doesn’t get well along with rotating axis. Or there is some matter with
rotating axis.
Treatment: Install the printer again which had better be processed by our company.

45
15 APPENDIX
15.1 Appendix 1: Barcode Coding List
Barcode type Department Commodit Total price Weight Checksum
y number
00~09: Ean13 code, the front two codes represent department code:
00 DD (2) IIIIIIIIII (10) X X C
01 DD (2) IIIIII (6) PPPP (4) X C
02 DD (2) IIIII (5) PPPPP (5) X C
03 DD (2) IIII (4) PPPPPP (6) X C
04 DD (2) III (3) PPPPPPP (7) X C
05 DD (2) IIIIII (6) X Q.QQQ (4) C
06 DD (2) IIIIII (6) X QQ.QQ (4) C
07 DD (2) IIIII (5) X QQ.QQQ (5) C
08 DD (2) IIIII (5) X QQQQ.Q (5) C
09 DD (2) IIIII (5) X QQQQQ (5) C
10~19: Ean13code, the front two codes represent fixed code:
10 20(2) IIIIIIIIII (10) X X C
11 21(2) IIIIII (6) PPPP (4) X C
12 22(2) IIIII (5) PPPPP (5) X C
13 23(2) IIII (4) PPPPPP (6) X C
14 24(2) III (3) PPPPPPP (7) X C
15 25(2) IIIIII (6) X Q.QQQ (4) C
16 26(2) IIIIII (6) X QQ.QQ (4) C
17 27(2) IIIII (5) X QQ.QQQ (5) C
18 28(2) IIIII (5) X QQQQ.Q (5) C
19 29(2) IIIII (5) X QQQQQ (5) C
20: no print barcode
21~29: Ean13 code, the front one code represents department code:
21 D (1) IIIIIII (7) PPPP (4) X C
22 D (1) IIIIII (6) PPPPP (5) X C
23 D (1) IIIII (5) PPPPPP (6) X C
24 D (1) IIII (4) PPPPPPP (7) X C
25 D (1) IIIIIII (7) X Q.QQQ (4) C
26 D (1) IIIIIII (7) X QQ.QQ (4) C
27 D (1) IIIIII (6) X QQ.QQQ (5) C
28 D (1) IIIIII (6) X QQQQ.Q (5) C
29 D (1) IIIIII (6) X QQQQQ (5) C
30~35,40~45: 18code, the front one code represents department code
30&33 D (1) IIIIII (6) PPPPP (5) QQ.QQQ (5) C
31&34 D (1) IIIIII (6) PPPPP (5) QQQQ.Q (5) C
32&35 D (1) IIIIII (6) PPPPP (5) QQQQQ (5) C
Barcode type Department Commodity Price Weight Checksum
number
40~45：Ean18 code, the front one code represents department code
40&43 D(1) IIIIII(6) UUUUU(5) WW．WWW(5) C
41&44 D(1) IIIIII(6) UUUUU (5) WWWW.W(5) C
42&45 D(1) IIIIII(6) UUUUU (5) WWWWW(5) C
50~52: 8 code
50 X IIIIIII (7) X X C
46
 51 D (1) IIIIII (6) X X C
52 DD (2) IIIII (5) X X C
53 X IIIIIIII(8) X X X
54 D(1) IIIIIII(7) X X X
55 DD(2) IIIIII(6) X X X
36-38: 18code, the front one code represents department code, which is particular for the
batch management of live commodity.
36 D (1) LLLLLL (6) IIII (4) RR (2) QQ.QQQ (5)
37 D (1) LLLLLL (6) IIII (4) RR (2) QQQQ.Q (5)
38 D (1) LLLLLL (6) IIII (4) RR (2) QQQQQ (5)

Bar code type Department Art. No Quantity/weight Total/Unit price Check sum
79~85，87：18 code
79 DD IIIIII(6) WW.WWW PPPPP X
80 D IIIIII(6) WW.WWW PPPPP C
81 D IIIIII(6) WWWW.W PPPPP C
82 D IIIIII(6) WWWWW PPPPP C
83 D IIIIII(6) WW.WWW UUU.UU C
84 D IIIIII(6) WWWW.W UUU.UU C
85 D IIIIII(6) WWWWW UUU.UU C
87 DD IIIII(5) WW.WWW PPPPP C

Bar code type Department Art. No Total price Quantity/weight Unit price Check sum
90~95: 18 code, the former two codes print department code
90 DD(2) IIIIII(6) WW.WWW UU.UU(4) C
91 DD(2) IIIIII(6) WWWW.W UU.UU(4) C
92 DD(2) IIIIII(6) WWWWW UU.UU(4) C
93 D(1) IIIIII(6) PPPPP(5) UUU.UU(5) C
94 DD(2) IIIII(5) PPPPP(5) WW.WWW C
95 DD(2) IIIIII(6) WWWWW UU.UU(4) C
Bar code type Department Art. No Quantity/weight Total price Unit price Check sum
96 DD(2) IIIIII(6) WWWW PPPPP(5) C
Bar code type Department Art. No Total price Quantity/weight Unit price Check sum
97 DD(2) IIII(4) PPPPPP(6) WW.WWW C
Bar code type Department Art. No Quantity/weight Total price Unit price Check sum
98 DD(2) IIIII(5) UUUUU(5) WW.WWW C
Meaning of characters in the above list:
C: CHECKSUM D: Department code 2: Fixed number I: commodity number L: Live code
P: price R: discount Q: weight X: no this item
Notes:
1. Ean 13= DEPMENT+CODE+[TOTAL PRICE]+[WEIGHT]+C
Items with [] mean no this item in some coding system.
2. Usually Ean13 adopts 2 or 22 as its price barcode type while 7 or 77 as its weight barcode type.
3. CHECKSUM is calculated by the scale automatically and it is not necessary for user to input in PLU manager.
4. The difference between 30-32 and 33-35 is the method to calculate checksum.
5. The difference between 40-45 and 30-35 is that the price in 30-35 is total price while in 40-45 is unit price.
6. 36-38 is barcode type, which can be accessed by live batch management. Commodity batch number takes up
commodity number column and commodity number takes up live code column.

47
DLS2M01ENV0-LS2X-20