1 Tonn of refrigeration consumes 1400 watt approx. For
coverting watt to ampere we have to divide 1400 to 230volt it comes approx 6amperes for safety meausres we select 3 times bigger MCB that means 18ampere.
Is This Answer Correct ? 14 Yes 8 No submit
1 ton AC takes how much current( starting & stable)..
Checked the Current of LG 1 Ton AC with Clamp Meter Stable Current is 0.3 Amps and When Compressor is On it is 4.78Amps RMS
Is This Answer Correct ? 5 Yes 0 No submit
1 ton AC takes how much current( starting & stable)..
Answer (/Viewpost/489311/All-Answers-Actually-Wrong-Mcbs-Handle-Quite-Larger-Current-2-15-Times-Depending.Html) / Tony
All the answers are actually wrong. MCBs can handle quite a larger current (2-15 times, depending on type) for short period of time so you don't consider inrush current.
Type B: 3-5 times
Type C: 5-10 times Type D: 10-20 times
The breaker in the distribution box usually is dependent wire gauges. You can adjust the mcb with socket according to load.
Use type C for ac. Only use 1.5 times of the running current. I use 13A for 1.5 ton ac.
Is This Answer Correct ? 2 Yes 0 No submit
1 ton AC takes how much current( starting & stable)..
Answer (/Viewpost/439150/Friend-If-Assume-Normal-Current-7-Amps-Due-Split-Ac-Considered-Inductive-Load-St.Html) / Ahmed Alyassi
My friend if we assume the normal.current is 7 amps
Then due to that split ac is considered it is inductive load The starting current would be x5 or x4 more So . 7 times 4 =28 amps
But even if your breaker is 25 lets assume
It might not trip. Immediatly cause the delay and the amps didnt increase alot I would recommend 32 A for 1ton or 1.5ton
Is This Answer Correct ? 20 Yes 19 No submit
1 ton AC takes how much current( starting & stable)..
Answer (/Viewpost/460429/Well-Ve-1-Ton-Lg-Window-Ac-Checked-Running-Amperage-6-23a-Answer-7a-Connected-Br.Html) / Qaiser Shah
well i ve 1 ton LG Window AC, i ve checked its running amperage is 6.23A, So my answer is 6-7A in running , i ve connected a breaker of 10A which does not trip on starting or running... i dont know the starting current...but i think may be 9A? Is This Answer Correct ? 7 Yes 7 No submit
1 ton AC takes how much current( starting & stable)..
Check the Specification sheet of the Air-conditioner for wattage consumed or running current in Amperes. Starting current for compressor motors can be safely assumed as 3.5 times the running current. MCB (breaker) rating should be 1.5 times the max current required that is the starting current. So, Breaker rating should be 5-6 times Aircon running current. This is unique to appliances with motors like Refrigerators, Air conditioners, Washing machines, water pumps etc.,
Can Induction motor run at over rated speed? ( 15oo rpm is rated speed for 50HZ. is it possible to ride 3000 RPM with same motor with the help of VVVFD for continues ride of 100HZ)
I completed my BE EEE degree 2006 .... which license should i apply .... ????? 0 Answers (/showanswers/194921/i-completed-my-be-eee-degree-2006-which-license-should-i-apply.html) Real Estate (/company/4055/real-estate.html),
why for transformer protection we protect tranformer from 3rd hormonics and 5th hormonics and what is the reason of generating these horminics in electrical system?
All the socket in a room become very hot, the Wall was also became very hot and the earth conductor also became live, what in your view might be the possible causes?
The power consumption, in case of centrifugal loads (like pump, fan, blower etc.), proportional to ____. 2 Answers (/showanswers/90192/power-consumption-case-centrifugal-loads-like-pump-fan-blower-etc-proportional.html)
Visa Interview Questions (/interview-questions/443/visa-interview-questions.html) :: USA Visa, UK Visa, Australia Visa, Canada Visa, Germany Visa, New Zealand Visa,...
Copyright Policy (https://www.allinterview.com/CopyrightPolicy.php) | Terms of Service
(https://www.allinterview.com/TermsOfService.php) | Site Map (https://www.allinterview.com/sitemap.php) | Contact Us (https://www.allinterview.com/contact.php)
