Catalog Solenoid Valves 3 2 Direct Pilot Operated Series 387 Asco en 4224552

3/2 SOLENOID VALVES
DIRECT AND PILOT OPERATED

Product Index
s: t ion
ge ar ct
pa Ch ele
S
III
II-
ck
ui
Q
Function ∆P Temperature Pipe Series Page
min. max. min. max. connections
(bar) (bar) (°C) (°C)
BRASS BODY
0 15 -10 +100 1/8 - 1/4 356 3
0 20 -25 +90 1/4 314 5
NC-NO-U
0 55 -20 +90 In-line 1/8 - 1/4 320 11
0 16 -25 +80 In-line 1/4 370 15
U 0 10 -50 +120 1/4 - 1/2 327 17
NC-NO 0 40 -20 +100 Coaxial 3/8 .. 1 387 19
0 10 -10 +100 Manifolds 1/8 356 31
NC 0 16 -25 +80 pad mount (1/4-1/2) 374 33
0 10 -40 +60 Monostable/bistable, IP67, IEC 61508 1/4 551 43
NC-NO 0 17 -20 +80 3/8 .. 1 316 49
STAINLESS STEEL BODY
Availability, design and specifications are subject to change without notice. All rights reserved.
NC 0 7 0 +60 M5 / pad mount 065 1

0 15 -10 +100 1/8 - 1/4 356 3
0 20 -25 +90 1/4 314 5
NC-NO-U
0 20 -20 +90 In-line 1/8 - 1/4 320 11
0 16 -25 +80 In-line 1/4 370 15
U 0 10 -50 +120 1/4 - 1/2 327 17
ALUMINIUM BODY
0 12 -25 +90 ISO 15218 (CNOMO, size 30) pad mount 374 35
NC 2 10 -25 +60 Monostable/bistable, IEC 61508 1/4 - 1/2 551-553 37
0 10 -25 +60 Monostable/bistable, IP67, CEI 61508 1/4 - 1/2 551-553 41
SYNTHETIC BODY
pad mount
NC 0 10 -25 +60 ISO 15218 (CNOMO, size 15) (M5-instant fittings) 302 21
pad mount
0 10 -10 +60 ISO 15218 (CNOMO, size 30) (1/8-instant fittings) 189 27
NC-NO
0 15 -10 +80 pad mount (M5) 109 29
ACCESSORIES AND OPTIONS
00066GB-2018/R01
Supply rail for series 551/553 881 45
(Potentially explosive atmospheres, see page: IV)

All leaflets are available on: www.asco.com
Solenoid Valves (3/2) - I
Quick Selection Chart - 3/2 SOLENOID VALVES
pipe connections body max. operating fluid power

w - internal thread pressure differential temperature
W - internal thread, in-line material coil
n - pad mount (bar) range
: - pad mount, pneumatic-electric
s - pad mount, CNOMO size 15
t - pad mount, CNOMO size 30
, - NAMUR interface AC DC
b - manifold subbases
` - instant fittings (~) (=)
min. operating pressure

orifice size (mm) / DN
instant fitting 4 mm OD
differential (bar)
stainless steel
(°C) (W)
other liquids
other liquids
inert gases
inert gases
pad mount
aluminium
synthetic
vacuum
vacuum
series
AC DC
1 1/4
1 1/2
brass
water
water
page
min. max.
M5
1/8
1/4
3/8
1/2
3/4
air
air
(~) (=)
oil
oil
1
NORMALLY CLOSED (NC)

0,6 0 - - - - - 7 - - - -0,9 0 +60 - 2,1
w n y 065 1
2 0 - - - - - 1,5 - - - - 0 +60 - 2,1
1,2 0 15 - 15 - - 15 - 15 - -
w yy -10 +100 4 5,5
2,4 0 4 - 4 - - 4 - 4 - -
356 3
1,6 0 10 - 10 - - 10 - 10 - -
w yy -10 +100 5 7
2,4 0 4 - 4 - - 4 - 4 - -
1,2 0 20 20 17 17
2,4 0 14 14 13 10 8 6
3,2 0 10 10 6,5 6 6 4,5
w yy -25 -90 10,1 11,6 314 5
4 0 5 5 3 3
5,6 0 2,5 2,5 1,7 1,7
7,1 0 1,7 1,7 1 1
W yy 1,2 0 20 - 20 - - 17 - 17 - - -20 +40 9 9,7
0,8 0 50 - 50 - - 35 - 35 - - -20 +40 16,7 11,2
y
0 15 - 15 - - 11 - 11 - - -20 +90 16,7 11,2
1,6 320 11
W 0 9 - 9 - - 9 - 9 - - -20 +90 6 9,7
y
3,2 0 6 - 6 - - 4,5 - 4,5 - - -20 +90 10,5 11,2
y 4,4 0 3 - 3 - - 1,7 - 1,7 - - -20 +90 10,5 11,2
16 - 16 - - 8 - 8 - - 8 10,8
2 0
16 - 16 - - 16 - 16 - - 10,5 11,2
W yy -25 +80 370 15
5 - 5 - - 2 - 2 - - 8 10,8
3,8 0
5 - 5 - - 5 - 5 - - 10,5 11,2
10 35 42
wwww y ü 0 12/40 - 12/40 - -20 +100 ü ü 387 19
25 60 69
: 0,6 10 10 1,2 0,55
w `
s
y ü 0 ü - - - - - ü - - - - - -25 +40 ü ü 302 21
1,5 3 3 2,1 2,65
w `t y 1,2 0 10 - - - - - 10 - - - - - -10 +60 2,5 3 189 27
1 0 15 - 15 - - 15 - 15 - -
w n y -10 +80 2,5 3 109 29
2,5 0 3 - 3 - - 3 - 3 - -
1,6 0 10 - 10 - - 10 - 10 - -
b y -10 +100 4 5,5 356 31
2,4 0 4 - 4 - - 4 - 4 - -
2 0 16 - 16 - - 16 - 16 - -
w w ny -25 +80 10,5 11,2 374 33
2,7 0 10 - 10 - - 10 - 10 - -
t y 2 0 12 - - - - 12 - - - - -25 +60/90 10,5 11,2 374 35
17 - 17 - - - 17 - 17 - - - 16,7 16,8
ww y 16 0,7 -20 +80
8,5 - 8,5 - - - 8,5 - 8,5 - - - 6 9,7
316 49
w y 18 0,7 17 - 17 - - - 17 - 17 - - - 16,7 16,8
-20 +80
ww y 18-25 0,7 8,5 - 8,5 - - - 8,5 - 8,5 - - - 6 9,7
NORMALLY CLOSED (NC) - MONOSTABLE/BISTABLE FUNCTION (1)
w 6 2 (0) 10 - - - - - 10 - - - - - 1,1 1,2 551 37
y -25 +60 ü ü
w 13 2 (0) 10 - - - - - 10 - - - - - 10,5 11,2 553 41
w y (1)
6 2 (0) 10 - - - - - 10 - - - - - -40 +60 10,5 11,2 551 43
00066GB-2018/R01
(1)
551-553: monostable function, certified IEC 61508 Functional Safety Data.

II - Solenoid Valves (3/2)
Quick Selection Chart - 3/2 SOLENOID VALVES
pipe connections body max. operating fluid power
w - internal thread pressure differential temperature
W - internal thread, in-line material coil
n - pad mount (bar) range
: - pad mount, pneumatic-electric
s - pad mount, CNOMO size 15
t - pad mount, CNOMO size 30
, - NAMUR interface AC DC
b - manifold subbases
` - instant fittings (~) (=)
min. operating pressure

orifice size (mm) / DN
instant fitting 4 mm OD
differential (bar)
stainless steel
(°C) (W)
other liquids
other liquids
inert gases
inert gases
pad mount
aluminium
synthetic
vacuum
vacuum
series
AC DC
1 1/4
1 1/2
brass
water
water
page
min. max.
M5
1/8
1/4
3/8
1/2
3/4
air
air
(~) (=)
oil
oil
1
NORMALLY OPEN (NO)

w yy 1,6 0 8,5 - 8,5 - - 8,5 - 8,5 - - -10 +100 4 5,5 356 3
1,2 0 20 20 17 17
2,4 0 12 12 11 11
w yy 3,2 0 11 11 10 10 8 -25 -90 10,1 11,6 314 5
4 0 10 10 4 4
5,6 0 6,5 6,5 2,5 2,5
7,1 0 4 4 1,7 1,7
W yy 1,2 0 20 - 20 - - 17 - 17 - - -20 +40 9 9,7
W y 0,8 0 55 - 55 - - 40 - 40 - - -20 +40 16,7 11,2
W 1,6 0 16 - 17 - - 11 - 11 - - -20 +90 16,7 11,2 320 11
W y 0 9 - 9 - - 9 - 9 - - -20 +90 6 9,7
W 3,2 0 5 - 5 - - 4 - 4 - - -20 +90 10,5 11,2
W y 4,4 0 3 - 3 - - 2 - 2 - - -20 +90 10,5 11,2
W yy 2 0 10 - 10 - - 10 - 10 - - -25 +80 10,5 11,2 370 15
3,8 0 3 - 3 - - 3 - 3 - -
10 35 42
wwwww y ü 0 12/40 - 12/40 - -20 +100 ü ü 387 19
25 60 69
w `t y 1,2 0 6 - - - - - 6 - - - - - -10 +60 2,5 3 189 27
w n y 1,5 0 8 - - 8 - - 4 - - 4 - - -10 +80 2,5 3 109 29
ww y 16 0,7 17 - 17 - - - 17 - 17 - - - -20 +80 16,7 16,8
16 0,7 8,5 - 8,5 - - - 8,5 - 8,5 - - - -20 +80 6 9,7
18 0,7 17 - 17 - - - 17 - 17 - - - -20 +80 16,7 16,8 316 49
w y 18 0,7 8,5 - 8,5 - - - 8,5 - 8,5 - - - -20 +80 6 9,7
w y 25 0,7 8,5 - 8,5 - - - 8,5 - 8,5 - - - -20 +80 6 9,7
UNIVERSAL (U)
w yy 1,6 0 4,5 - 4,5 - - 4,5 - 4,5 - - -10 +100 4 5,5 356 3
2,4 0 2 - 2 - - 2 - 2 - -
1,2 0 13 13 13 13
2,4 0 7 5,5 4 7 5,5 4
w yy 3,2 0 4,5 4,5 2,5 3,5 3 -25 -90 10,1 11,6 314 5
4 0 2,5 2,5 1,7 1,7
5,6 0 1,2 1,2 0,8 0,8
7,1 0 0,68 0,68 0,55 0,55
W yy 1,2 0 12 - 12 - - 9 - 9 - - -20 +40 9 9,7
W y 0,8 0 27 - 28 - - 19 - 21 - - -20 +40 16,7 11,2

W 1,6 0 7 - 7 - - 4 - 4 - - -20 +90 10,5 11,2 320 11
W y 0 7 - 7 - - 4,5 - 4,5 - - -20 +90 9 9,7
W 3,2 0 3,5 - 3,5 - - 1,7 - 1,7 - - -20 +90 16,7 11,2
W y 4,4 0 1,5 - 1,5 - - 0,8 - 0,8 - - -20 +90 10,5 11,2
yy 2 0 8 - 8 - - 8 - 8 - - -25 +80 10,5 11,2 370 15
W 3,8 0 2 - 2 - - 2 - 2 - -
10 - 10 - - 10 - 10 - - -50 +120 10 11,2
w yy 5,7 0
10 - 10 - - 10 - 10 - - -50 +120 3,7 3,6 327 17
w w yy 12 0 10 - - - - 10 - - - - -50 +90 10/14,1 10/14
UNIVERSAL (U) - CERTIFIED IEC 61508 FUNCTIONAL SAFETY DATA
10 - 10 - - 10 - 10 - - -50 +120 10 11,2
W yy 5,7 0
10 - 10 - - 10 - 10 - - -50 +120 3,7 3,6 327 17
W W yy 12 0 10 - - - - 10 - - - - -50 +90 10/14,1 10/14
00066GB-2018/R01

Solenoid Valves (3/2) - III
(1)
5
3
49
45
43
41
37
35
33
29
27
21
19
17
15
11
page
q
series
Contact us.
881
553
551
553
551
374
374
109
189
302
387
327
370
320
314
356
-
-
-
-
-
-
-
-
-
6
5
9
6
5
4
AC (~)
10
10
operators
2,5
2,5
2,5
3,7
10,5
10,5
14,1
10,5
16,7
10,5
10,1
(See Explosionproof
coil
(W)
power
316 16,7 -
-
-
-
-
-
-
-
-
-
-
5
3
3
3
DC (=) Solenoids section)
14
10
9,7
3,6
9,7
6,9
6,9
- 16,8
551 10,5 11,2
10,5 11,2
11,2
11,2
11,2
11,2
11,2
11,6
0,5 (1)
IV - Solenoid Valves (3/2)

q
q
q
q
SG (XM5)
q
q
q
q
22
SG (C25) IIIC T115°C Dc IP65X 3 D Ex tc

zone
dusts
q
q
SG (MXX-II)
3 G Ex nA
q
q
302 IIC T6..T4 Gc / IIIC IP65 T85°C..T135°C Dc
2 - 22
zones
3 D Ex tc

(WS)LPKF (M6) IIB+H2 Gb T6..T4, IIIC Db IP66/IP67
q
q
q q
q q
q
q
q
q
(WS)NF (MXX)
11,2
10,5
2G Ex db
IIC T6..T4 Gb / IIIC Db IP66/67
2D Ex tb
q
q
q
(WS)NF (M12)
q
314/LPKF II2G IIB+H2 Gb T6..T4, II2D IIIC Db IP66/IP67
IIC T4 Gb, IIIC T135°C Db IP67 2 G Ex e mb
WBLP
2 D Ex tb
q
q
(WS)EM (M6)
2 G Ex eb mb
q
q
q
q
q
q
q
q
(WS)EM (MXX) IIC T6..T3 Gb / IIIC Db IP66/67)
11,2
10,5
zones
2 D Ex tb
1 - 21 or 1
q
q
q
q
(WS)EM (M12)
4
4
4
6,3
q
q
q
q
6,9
6,9
PV (EM5)
group II
IIC Gb / IIIC Db IIP67 2 G Ex mb

2 D Ex mb
q
q
q
q
q
q
q
PV (EMXX)
11,2
10,5
gas / dusts
(1)
(1)
WSCR/WSCEM/WSCRIS Ex d, Ex e mb, Ex ia 2G2D
1G Ex ia
q
195/LISC IIC T6 Ga, T85°C Db IP67
2D Ex ib IIIC
1G Ex ia
q
q
LI/WSLI (M6) IIC T6 Ga, T85°C IP66/IP67 Db
0-21
zones
2D Ex tb IIIC
1G Ex ib
q
NFIS/WSNFIS IIC T6 Gb / IIIC T85°C IP66/IP67 Db
2D Ex tb
1G Ex ia
q
302 IIC T6..T4 Ga, IIIC T85°C..T135°C IP65 Da
2GD
1D Ex ia
0-20
zones
1G Ex ia
q
630 (piezotronic) IIC T6
1D Ex ia IIIC
Quick Selection Chart - POTENTIALLY EXPLOSIVE ATMOSPHERES
00066GB-2018/R01
SOLENOID VALVES 3/2
Series
direct operated, quick switching 2
threaded or pad-mount body NC 065

3 1
M5
FEATURES
• Miniature solenoid valve for medical analyzers, gas analyzers and leak detectors
• New flat-spring technology ensures no contamination of fluids (no friction)
• Suitable for the control of gases
• The valves have a service life of more than 1 billion cycles when used with
neutral gas
• Short response times
• Easy to integrate thanks to the valves’ small size
• Available in a variety of versions for a wide range of applications: threaded
connections or pad-mount for installation on multiple manifolds
• Vacuum application up to 0,1 bar abs. (0,6 mm and 1 mm dia. orifice sizes)
GENERAL
Differential pressure See «SPECIFICATIONS» [1 bar =100 kPa]
Maximum viscosity 20 cSt (mm2/s)
Response time < 10 ms
Internal volume ≤ 350 µl (couplings not included)
fluids () temperature range (TS) seal materials () 3
air, inert gases
0°C to +60°C FPM (fluoroelastomer) (2)
(filtered 50 µm)
MATERIALS IN CONTACT WITH FLUID

() Ensure that the compatibility of the fluids in contact with the materials is verified
Body Stainless steel, AISI 303 (1.4305)
Plugnut Stainless steel
Spring disc Stainless steel 2 1
Seat Stainless steel
Seals FPM NC function
Disc FPM 3
ELECTRICAL CHARACTERISTICS
Coil insulation class F
Connection Cable leads (ETFE); 0,35 m length
Electrical safety IEC 335
Electrical enclosure protection IP40 (EN 60529)
Standard voltages DC (=) : 6V - 12V - 24V
power ratings operator
prefix inrush holding hot/cold ambient
temperature replacement coil type (1) 2
option ~ ~ = range (TS)
1
(VA) (VA) (W) (W) (C°)
NC function, pad-mount body
L - - - 2,1 / 2,1 0 to +60 - - 01
Refer to the dimensional drawings on the following page.
(1)
SPECIFICATIONS
operating pressure
flow differential (bar) catalogue
pipe orifice power coil number
size coefficient
size max. (PS) (W)
Kv
min. air, inert gases () threaded pad-mount body
(mm) (m3/h) (l/min) = = = =
NC - Normally closed
0,6 0,013 0,22 0 7 2,1 LE065A009V LS065A009V
1 0,025 0,43 0 5 2,1 LE065A010V LS065A010V
M5 (3)
1,4 0,032 0,54 0 3 2,1 LE065A011V LS065A011V
2 0,057 0,95 0 1,5 2,1 LE065A012V LS065A012V
FFPM seals for corrosive fluids (Contact us).
(2)
External thread with pad-mount body.

(3)
00158GB-2017/R01

Solenoid Valves (3/2) - 1
SOLENOID VALVES SERIES 065
OPTIONS (on request)
• Other seal materials
• Response time 2-3 ms
• Oxygen service
• Other pipe connections are available
• 0,7 W rated coil
INSTALLATION
• The solenoid valves can be mounted in any position without affecting operation
• Threaded solenoid valves have 2 mounting holes in body
• Pad-mount valves and o-ring seals for multiple manifolds
ORDERING EXAMPLES:
L E 065 A 009 V 6V / DC
L E 065 A 010 V 24V / DC
L S 065 A 009 V 12V / DC
L S 065 A 011 V 6V / DC
prefix
pipe thread voltage
DIMENSIONS (mm), WEIGHT(kg) basic number suffix
TYPE 01
Prefix “L” Solenoid
Cable ends
IP40
LE065A009V/010V/011V/012V LS065A009V/010V/011V/012V
F 1
1 ØA
ØA 3
M5 3
J
G E
E
3
M5
D 2
C M5
2 1
1
B ØH
Mounting pad
max. Ø 1,5 +0,05 Availability, design and specifications are subject to change without notice. All rights reserved.
0,1
0, 9±
Ø1
M5 / 5 depth
prefix catalogue 1 2 electrical supply wires, length: 0,35 m.

00158GB-2017/R01
type A B C D E F G H J weight (1)

option number 2 2 mounting holes Ø M4, depth 6 mm.
LE065A009V/010V/011V/012V 22 17,4 5 9,5 38 12,7 6,35 - - 0,068 3 Mounting with hook spanner wrench
01 L
LS065A009V/010V/011V/012V 22 - - - 41 - - 10,9 37 0,066 DIN 1810B.
Including leads, length 0,35 m.
(1)

2 - Solenoid Valves (3/2)
SOLENOID VALVES NC
1
3/2
Series
direct operated
3 2
1/8 - 1/4 U
1
3 2
356
NO
3 2
FEATURES
• Compact design for the control of single-acting actuators or filling and draining
cycles
• Wide range of flow and pressure ratings
• Quick disassembly of core tube for easy maintenance of internal parts
• Standard disc seal made of FPM suitable for a wide range of operating tempera-
tures and compatible with many fluids
• Standard manual operator allows an easy installation
• AC/DC interchangeability of the solenoid without disassembly of the valve
• Compliance with UL and CSA standards (coil 4/6,9 W)
• Compact and low weight valve
• The solenoid valves satisfy all relevant EU directives
GENERAL
Response time 5 - 10 ms
fluids () temperature range (TS) seal materials ()
air, inert gas, water, oil -10°C to +100°C FPM (fluoroelastomer)
3
Brass body Stainless steel body
Body Brass AISI 316
Core tube Stainless steel Stainless steel
Core and plugnut Stainless steel Stainless steel
Springs Stainless steel Stainless steel
Seat Brass Stainless steel
Seals FPM FPM
Disc FPM FPM
Shading coil Copper Copper 2 1
ELECTRICAL CHARACTERISTICS NC function
Coil insulation class F 3
Connector Spade plug (cable Ø 6-8 mm or Ø 6-10 mm)
Connector specification DIN 43650, 11 mm, industry standard B (type 01)
or ISO 4400 / EN 175301-803, form A (type 02)
Electrical enclosure protection Moulded IP65 (EN 60529)
Standard voltages DC (=) : 24V - 48V
(Other voltages and 60 Hz on request) AC (~) : 24V - 48V - 115V - 230V / 50 Hz
ambient replacement coil
prefix inrush holding hot/cold temperature type (1)
option ~ ~ = range (TS) ~ =
(VA) (VA) (W) (W) (C°) 2 1
230 V/50 Hz 24 V DC
12 6 4 5 / 6,9 -10 to +60 400127-197 400127-142 01 NO function
SC
15 7 5 4/5 -10 to +60 400727-117 400727-185 02
(1)
SPECIFICATIONS
operating pressure options
pipe orifice coefficient max. (PS) power coil
number
size size Kv (W)
air, water,
min.
oil ()
EPDM
2 1 3 1 brass stainless steel

G (mm) (m3/h) (l/min) (m3/h) (l/min) ~ = ~ = ~/= ~/=
1,2 0,05 0,8 0,05 0,8 0 15 15 4 6,9 SCG356B001VMS SCG356B013VMS E - -
1/8 (2)
1,6 0,08 1,33 0,05 0,8 0 10 10 5 5 SCG356B466VMS SCG356B434VMS - - -
1/4 (2)
2,4 0,16 2,67 0,05 0,8 0 4 4 5 5 SCG356B470VMS SCG356B436VMS - - -
U - Universal
1,6 0,06 1 0,05 0,8 0 4,5 4,5 4 6,9 SCG356B010VMS SCG356B022VMS E - -
1/8 (2) 2,0 0,08 1,33 0,05 0,8 0 3 3 4 6,9 SCG356B011VMS SCG356B023VMS E - -
00067GB-2017/R01
NO - Normally open
1/8 (2) 1,6 0,096 1,6 0,05 0,8 0 8,5 8,5 4 6,9 SCG356B006VMS SCG356B018VMS E - -
Pipe size port 3: M5 (Orifice size = 1,2 mm).
(2)

Solenoid valves (3/2) - 3
OPTIONS
• Valves can also be supplied with EPDM (ethylene-propylene) seals and discs. Use the appropriate optional suffix letter for
identification (1/8 version only)
• Explosionproof enclosures for use in zones 1/21-2/22, categories 2-3 to ATEX Directive 2014/34/EU (www.asco.com)
• Flying leads coil, use prefix L (e.g.: LG356B001VMS) (4 W/6,9 W coil only)
• Oxygen service with seals and disc in FPM, suffix NV, example: SCG356B001NVMS
• Solenoid valves integrated on manifold, orifice sizes 1,2 - 1,6 - 2 - 2,4 mm (www.asco.com)
• Without manual operator, on request
• Other pipe connections are available on request
• Connector with visual indication and peak voltage suppression or with cable length of 2 m (www.asco.com)
INSTALLATION
• Solenoid valves have 2 mounting holes in body
• Pipe connection identifier is G = G (ISO 228/1)
• Installation/maintenance instructions are included with each valve
ORDERING EXAMPLES:
SC G 356 B 001 VMS 230V / 50 Hz
SC G 356 B 002 EMS 115V / 50 Hz
SC G 356 B 014 NVMS 24V / DC
SC G 356 B 001 FWMS 24V / DC
SC G 356 B 456 VMS 230V / 50 Hz
SC G 356 B 006 VMS 230V / 50 Hz
prefix
pipe thread voltage
basic number suffix
DIMENSIONS (mm), WEIGHT (kg)

TYPE 01 TYPE 02
Prefix “SC” Solenoid Prefix “SC” Solenoid
Epoxy moulded Epoxy moulded
IEC 335 / DIN 43650 IEC 335 / ISO 4400
IP65 IP65
NC/NO/U (1/8): All 1/8 catalogue numbers NC (1/4): SCG356B434VMS/436VMS/466VMS/470VMS/471V/472V
18
15
21
R=3 18 2 x Ø M3 2 x Ø M3
R=3
E A 35 35
A
B E
B C
C
3 M5
3 M5
360°
360° J G J
G
H H
X X
2 1 2 1
D K K
F 1 D F
prefix pipe weight (1)

00067GB-2018/R01
type A B C D E F G H J K X
option size brass stainless steel
01 SC 1/8 60,5 27,5 16,5 33 22 25,5 46 53 69 15 18,6 0,156 0,138
02 SC 1/4 76 38 23,3 40 29,7 28,5 48 57 79 15 23,4 0,232 0,229
including coil and connector.
(1)

4 - Solenoid valves (3/2)
SOLENOID VALVES NC
1
3/2
Series
direct operated 3 2
1/8 - 1/4 U
2
3 1
314
1
NO
3 2
FEATURES
• Compact valve intended for single acting actuator control
• High operating speed
• Valve optimised for general 3-way piloting applications, only one spring and two
moving parts
• RoHS compliance
• Valves do not require a minimum operating pressure
• Compliance with UL and CSA standards
GENERAL
NBR (nitrile) UL
air, inert gas, water, oil - 25°C to + 90°C
FPM (fluoroelastomer)
GENERAL 3
Body Brass Stainless steel, AISI 304
Shading coil Copper Silver
Core tube Stainless steel, AISI 305
Core and plugnut Stainless steel, AISI 430F
Springs Stainless steel, AISI 302
Seals NBR
Disc NBR
Upper disc FPM
Core guide POM
1 2
ELECTRICAL CHARACTERISTICS NC function (1/8)

Coil insulation class F 3
Connector Spade plug (cable Ø 6-10 mm)
Connector specification ISO 4400 / EN 175301-803, form A
(Other voltages and 60 Hz on request) AC (~) : 24V - 48V - 115V - 230V/50 Hz
operator power ratings
ambient replacement coil (1)
temperature inrush holding hot/cold

range (TS) ~ ~ = ~ =
(°C) (VA) (VA) (W) (W) 230 V/50 Hz 24 V DC
-25 to +55 50 25 10,1 8,5/11,6 238613-059 238713-006 1 2
All 238 basic numbers are UL & CSA approved and marked with the UR (recognised component) & CSA
(1)
logos.
NC function (1/4)
OPTIONS 3
Seals and disc () FPM (fluoroelastomer):
(fluid temperature range) (2) -15°C to +120°C (AC)
-15°C to +90°C (DC)
Oxygen service, FPM disc and seals, see “15-DIGIT PRODUCT CODE”
Connector with visual indication and peak voltage suppression or
with cable length of 2 m (www.asco.com)
Explosionproof enclosures for use in zones 1/21-2/22, categories 2-3 to
ATEX Directive 2014/34/EU (See page: 7)
() Vérifier la compatibilité du fluide avec les matériaux en contact.
01014GB-2017/R02
(2)
The minimum ambient temperature of the solenoid valve is determined by the limitations of minimum
temperature indicated. 1 2
NO function (1/4)

SPECIFICATIONS 15-DIGIT PRODUCT CODE

flow operating pressure voltage code
coefficient differential (bar)
dimensions /
orifice power coil
115 V/50 Hz
230 V/50 Hz
pipe size max. (PS)
24 V/50 Hz
48 V/50 Hz
Kv (W) brass stainless steel
24 V/DC
48 V/DC
size min. air () water () oil ()
type (1)
2 1 1 3
thread
type
(mm) (m3/h) (l/min) (m3/h) (l/min) ~ = ~ = ~ = ~ =
WITHOUT MANUAL OPERATOR
NC - Normally closed, NBR seal and disc
1,2 0,04 0,7 0,05 0,8 0 20 17 20 17 20 17 10,1 11,6 G 01 G314K031S1N00 G314K037S1N00
1/8 2,4 0,13 2,2 0,17 2,8 0 14 10 14 8 13 6 10,1 11,6 G 01 G314K032S1N00 G314K038S1N00
3,2 0,22 3,7 0,17 2,8 0 10 6 10 6 6,5 4,5 10,1 11,6 G 01 G314K033S1N00 G314K039S1N00
1,2 0,04 0,7 0,05 0,8 0 20 17 20 17 20 17 10,1 11,6 G* 01 E314K034S1N00 E314K068S1N00
2,4 0,13 2,2 0,17 2,8 0 14 10 14 8 13 6 10,1 11,6 G* 01 E314K035S1N00 E314K121S1N00 FL FR FT F8 F1 F9
3,2 0,22 3,7 0,17 2,8 0 10 6 10 6 6,5 4,5 10,1 11,6 G* 01 E314K036S1N00 E314K126S1N00
1/4
4 0,43 7,1 0,17 2,8 0 5 3 5 3 5 3 10,1 11,6 G* 01 E314K130S1N00 E314K230S1N00
5,6 0,60 10 0,17 2,8 0 2,5 1,7 2,5 1,7 2,5 1,7 10,1 11,6 G* 01 E314K131S1N00 E314K231S1N00
7,1 0,73 12,1 0,17 2,8 0 1,7 1 1,7 1 1,7 1 10,1 11,6 G* 01 E314K132S1N00 E314K232S1N00
U - Universal, NBR seal and disc
1,2 0,04 0,7 0,05 0,8 0 13 13 13 13 13 13 10,1 11,6 G 01 G314K041S1N00 G314K042S1N00
1/8 2,4 0,13 2,2 0,17 2,8 0 7 7 5,5 5,5 4 4 10,1 11,6 G 01 G314K043S1N00 G314K044S1N00
3,2 0,22 3,7 0,17 2,8 0 4,5 3,5 4,5 3 2,5 3 10,1 11,6 G 01 G314K045S1N00 G314K040S1N00
1,2 0,04 0,7 0,05 0,8 0 13 13 13 13 13 13 10,1 11,6 G* 01 E314K006S1N00 E314K123S1N00
2,4 0,13 2,2 0,17 2,8 0 7 7 5,5 5,5 4 4 10,1 11,6 G* 01 E314K007S1N00 E314K120S1N00 FL FR FT F8 F1 F9
3,2 0,22 3,7 0,17 2,8 0 4,5 3,5 4,5 3 2,5 3 10,1 11,6 G* 01 E314K008S1N00 E314K124S1N00
1/4
4 0,43 7,1 0,17 2,8 0 2,5 1,7 2,5 1,7 2,5 1,7 10,1 11,6 G* 01 E314K127S1N00 E314K227S1N00
5,6 0,60 10 0,17 2,8 0 1,2 0,8 1,2 0,8 1,2 0,8 10,1 11,6 G* 01 E314K128S1N00 E314K228S1N00
7,1 0,73 12,1 0,17 2,8 0 0,68 0,55 0,68 0,55 0,68 0,55 10,1 11,6 G* 01 E314K129S1N00 E314K229S1N00
NO - Normally open, NBR seal and disc
1,2 0,04 0,7 0,05 0,8 0 20 17 20 17 20 17 10,1 11,6 G 01 G314K049S1N00 G314K055S1N00
1/8 2,4 0,13 2,2 0,17 2,8 0 12 11 12 11 12 11 10,1 11,6 G 01 G314K050S1N00 G314K056S1N00
3,2 0,22 3,7 0,17 2,8 0 11 10 11 10 11 10 10,1 11,6 G 01 G314K051S1N00 G314K057S1N00
1,2 0,04 0,7 0,05 0,8 0 20 17 20 17 20 17 10,1 11,6 G* 01 E314K052S1N00 E314K069S1N00
3,2 0,22 3,7 0,17 2,8 0 11 10 11 10 11 8 10,1 11,6 G* 01 E314K054S1N00 E314K070S1N00
1/4
4 0,43 7,1 0,17 2,8 0 10 4 10 4 10 4 10,1 11,6 G* 01 E314K133S1N00 E314K233S1N00
5,6 0,60 10 0,17 2,8 0 6,5 2,5 6,5 2,5 6,5 2,5 10,1 11,6 G* 01 E314K134S1N00 E314K234S1N00
7,1 0,73 12,1 0,17 2,8 0 4 1,7 4 1,7 4 1,7 10,1 11,6 G* 01 E314K135S1N00 E314K235S1N00
WITH MAINTAINED MANUAL OPERATOR
NC - Normally closed, NBR seal and disc
1,2 0,04 0,7 0,05 0,8 0 20 17 20 17 20 17 10,1 11,6 G 01 G314K031S1N01 G314K037S1N01
1/8 2,4 0,13 2,2 0,17 2,8 0 14 10 14 8 13 6 10,1 11,6 G 01 G314K032S1N01 G314K038S1N01
3,2 0,22 3,7 0,17 2,8 0 10 6 10 6 6,5 4,5 10,1 11,6 G 01 G314K033S1N01 G314K039S1N01
1,2 0,04 0,7 0,05 0,8 0 20 17 20 17 20 17 10,1 11,6 G* 01 E314K034S1N01 E314K068S1N01
3,2 0,22 3,7 0,17 2,8 0 10 6 10 6 6,5 4,5 10,1 11,6 G* 01 E314K036S1N01 E314K126S1N01
1/4
4 0,43 7,1 0,17 2,8 0 5 3 5 3 5 3 10,1 11,6 G* 01 E314K130S1N01 E314K230S1N01
5,6 0,60 10 0,17 2,8 0 2,5 1,7 2,5 1,7 2,5 1,7 10,1 11,6 G* 01 E314K131S1N01 E314K231S1N01
7,1 0,73 12,1 0,17 2,8 0 1,7 1 1,7 1 1,7 1 10,1 11,6 G* 01 E314K132S1N01 E314K232S1N01
U - Universal, NBR seal and disc
1,2 0,04 0,7 0,05 0,8 0 20 17 20 17 20 17 10,1 11,6 G 01 G314K049S1N01 G314K055S1N01
1/8 2,4 0,13 2,2 0,17 2,8 0 12 11 12 11 12 11 10,1 11,6 G 01 G314K050S1N01 G314K056S1N01
3,2 0,22 3,7 0,17 2,8 0 11 10 11 10 11 8 10,1 11,6 G 01 G314K051S1N01 G314K057S1N01
1,2 0,04 0,7 0,05 0,8 0 13 13 13 13 13 13 10,1 11,6 G* 01 E314K006S1N01 E314K123S1N01
2,4 0,13 2,2 0,17 2,8 0 7 7 5,5 5,5 4 4 10,1 11,6 G* 01 E314K007S1N01 E314K120S1N01 FL FR FT F8 F1 F9
3,2 0,22 3,7 0,17 2,8 0 4,5 3,5 4,5 3 2,5 3 10,1 11,6 G* 01 E314K008S1N01 E314K124S1N01
1/4
4 0,43 7,1 0,17 2,8 0 2,5 1,7 2,5 1,7 2,5 1,7 10,1 11,6 G* 01 E314K127S1N01 E314K227S1N01
5,6 0,60 10 0,17 2,8 0 1,2 0,8 1,2 0,8 1,2 0,8 10,1 11,6 G* 01 E314K128S1N01 E314K228S1N01
7,1 0,73 12,1 0,17 2,8 0 0,68 0,55 0,68 0,55 0,68 0,55 10,1 11,6 G* 01 E314K129S1N01 E314K229S1N01
NO - Normally open, NBR seal and disc
1,2 0,04 0,7 0,05 0,8 0 20 17 20 17 20 17 10,1 11,6 G 01 G314K049S1N01 G314K055S1N01
1/8 2,4 0,13 2,2 0,17 2,8 0 12 11 12 11 12 11 10,1 11,6 G 01 G314K050S1N01 G314K056S1N01
3,2 0,22 3,7 0,17 2,8 0 11 10 11 10 11 8 10,1 11,6 G 01 G314K051S1N01 G314K057S1N01
1,2 0,04 0,7 0,05 0,8 0 20 17 20 17 20 17 10,1 11,6 G* 01 E314K052S1N01 E314K069S1N01
3,2 0,22 3,7 0,17 2,8 0 11 10 11 10 11 8 10,1 11,6 G* 01 E314K054S1N01 E314K070S1N01
1/4
4 0,43 7,1 0,17 2,8 0 10 4 10 4 10 4 10,1 11,6 G* 01 E314K133S1N01 E314K233S1N01
5,6 0,60 10 0,17 2,8 0 6,5 2,5 6,5 2,5 6,5 2,5 10,1 11,6 G* 01 E314K134S1N01 E314K234S1N01
7,1 0,73 12,1 0,17 2,8 0 4 1,7 4 1,7 4 1,7 10,1 11,6 G* 01 E314K135S1N01 E314K235S1N01
01014GB-2016/R01
For dimensions, see drawing(s) for each construction type on the following page(s).
(1)

Configurator - CAD Files

15-DIGIT PRODUCT CODE
E 314 K 034 S1 N00 F1
Thread connection Voltage - class
G = ISO 228/1 (1/8) FL = 24 V / 50 Hz - class F
E = ISO 228/1 & ISO 7/1 (combination thread, G*) FR = 48 V / 50 Hz - class F
8 = NPT (SAE 71051) [contact us] FT = 115 V / 50 Hz - class F
F8 = 230 V / 50 Hz - class F
F1 = 24 V DC - class F
Product series F9 = 48 V DC - class F
314
Revision letter Options
K = Initial release Without manual operator
N00 = NBR disc and seals
V00 = FPM disc and seals
VN0 = FPM disc and seals for Oxygen service
Valves version
With maintained manual operator
N01 = NBR disc and seals
Electrical interface & explosion proof options V01 = FPM disc and seals
S1 = With spade plug connector VN1 = FPM disc and seals for Oxygen service
MV = S teel enclosure, M20 cable gland, IECEx/ATEX

II 2G Ex e mb IIC Gb T3, II2D Ex tb IIIC Db IP66/IP67, zone 1-21 (equivalent to EM prefix)(2)
MT = Steel enclosure, 20 mm conduit, IECEx/ATEX
II 2G Ex e mb IIC Gb T3, II2D Ex tb IIIC Db, zone 1-21 (equivalent to EMET prefix)(2)
MN = S teel enclosure, 1/2 NPT conduit, IECEx/ATEX
II 2G Ex e mb IIC Gb T3, II2D Ex tb IIIC Db IP66/IP67, zone 1-21 (equivalent to EMT prefix)(2)
MW = AISI 316L enclosure, M20 cable gland, IECEx/ATEX
II 2G Ex e mb IIC Gb T3, II2D Ex tb IIIC Db IP66/IP67, zone 1-21 (equivalent to WSEM prefix)(2)
MU = A ISI 316L enclosure, 20 mm conduit, IECEx/ATEX
II 2G Ex e mb IIC Gb T3, II2D Ex tb IIIC Db IP66/IP67, zone 1-21 (equivalent to WSEMET prefix)(2)
MS = A ISI 316L enclosure, 1/2 NPT conduit, IECEx/ATEX
II 2G Ex e mb IIC Gb T3, II2D Ex tb IIIC Db IP66/IP67, zone 1-21 (equivalent to WSEMT prefix)(2)
A7 = Moulded enclosure, epoxy encapsulated, integrated cable, IECEx/ATEX
II2G Ex mb IIC Gb T3(~)/T4(=), II2D Ex mb IIIC Db IP67, zone 1-21 (equivalent to PV prefix)(2)
SG = M oulded coil with connector, epoxy encapsulated, ATEX
II 3 D Ex tc IIIC T115°C Dc IP65X, zone 22 (equivalent to SG prefix)(2)
Search prefix in asco.com to get detailed technical information.

(2)
Please note that the valve pressure ratings with some of the ATEX enclosures will be reduced.
To obtain the correct pressure rating please check the landing pages of the “2-Way Solenoid Valve DIN Configurator”.
01014GB-2017/R01

SPARE PARTS KITS CODE ()

AC (~) DC (=)
FPM FPM
NBR FPM NBR FPM
(oxygen) (oxygen)
E314K006 M200074 N00 V00 VN0 M200074 N00 V00 VN0
E314K007/008 M200078 N00 V00 VN0 M200075 N00 V00 VN0
E314K034 M200070 N00 V00 VN0 M200066 N00 V00 VN0
E314K035/036 M200071 N00 V00 VN0 M200067 N00 V00 VN0
E314K052 M200080 N00 V00 VN0 M200080 N00 V00 VN0
E314K053/054 M200081 N00 V00 VN0 M200081 N00 V00 VN0
E314K068 M200072 N00 V00 VN0 M200068 N00 V00 VN0
E314K069 M200082 N00 V00 VN0 M200082 N00 V00 VN0
E314K070 M200083 N00 V00 VN0 M200083 N00 V00 VN0
E314K120 M200079 N00 V00 VN0 M200077 N00 V00 VN0
E314K121 M200073 N00 V00 VN0 M200069 N00 V00 VN0
E314K122 M200083 N00 V00 VN0 M200083 N00 V00 VN0
E314K123 M200076 N00 V00 VN0 M200076 N00 V00 VN0
E314K124 M200079 N00 V00 VN0 M200077 N00 V00 VN0
E314K126 M200073 N00 V00 VN0 M200069 N00 V00 VN0
E314K127/128/129 M200078 N00 V00 VN0 M200075 N00 V00 VN0
E314K130/131/132 M200071 N00 V00 VN0 M200067 N00 V00 VN0
E314K133/134/135 M200081 N00 V00 VN0 M200081 N00 V00 VN0
E314K227/228/229 M200079 N00 V00 VN0 M200077 N00 V00 VN0
E314K230/231/232 M200073 N00 V00 VN0 M200069 N00 V00 VN0
E314K233/234/235 M200083 N00 V00 VN0 M200083 N00 V00 VN0
G314K031 M200070 N00 V00 VN0 M200066 N00 V00 VN0
G314K032/033 M200071 N00 V00 VN0 M200067 N00 V00 VN0
G314K037 M200072 N00 V00 VN0 M200068 N00 V00 VN0
G314K038/039 M200073 N00 V00 VN0 M200069 N00 V00 VN0
G314K040 M200079 N00 V00 VN0 M200077 N00 V00 VN0
G314K041 M200074 N00 V00 VN0 M200074 N00 V00 VN0
G314K042 M200076 N00 V00 VN0 M200076 N00 V00 VN0
G314K043 M200078 N00 V00 VN0 M200075 N00 V00 VN0
G314K044 M200079 N00 V00 VN0 M200077 N00 V00 VN0
G314K045 M200078 N00 V00 VN0 M200075 N00 V00 VN0
G314K049 M200080 N00 V00 VN0 M200080 N00 V00 VN0
G314K050/051 M200081 N00 V00 VN0 M200081 N00 V00 VN0
G314K055 M200082 N00 V00 VN0 M200082 N00 V00 VN0
G314K056/057 M200083 N00 V00 VN0 M200083 N00 V00 VN0
ACCESSORIES CODE
Mounting bracket
Steel version M200094A00
(AISI 1010 / 1.1121)
Mounting bracket
Stainless steel version M200095A00
(AISI 304 / 1.4301)
INSTALLATION
• Thread connection “E” applicable for 1/4 have standard thread according to ISO 228/1 and ISO 7/1. Thread connection “G” ap-
plicable for 1/8, have standard thread according to ISO 228/1
• Thread connection “8” have standard thread = NPT (SAE 71051) (contact us)
01014GB-2017/R01

DIMENSIONS (mm), WEIGHT (kg) Configurator - CAD Files

TYPE 01
Electrical interface “S1”
Epoxy moulded
IEC 335 / ISO 4400
IP65
1/8 1/4
22
=
17,5
=
=
=
1 22 1
= 15 = = =
A E
A E B
B C
3 1/8
C
360° 360°
H F H
FG
G
1
X X
2
1 2
D 3 3
2 2 D 2 2
1 2 mounting holes M5 dia., depth 6 mm.

pipe
type A B C D E F G H X weight (1) 2 Manual operator location.
size
1/8 95 57 33 31 50 71 79 90 26 0,30
01
1/4 95 57 33 40 50 73 82 96 30 0,59
Incl. coil(s) and connector(s).
(1)
Mounting bracket
Steel or stainless steel
3,2 x 8
M200094A00 / M200095A00 36
6.8 22,4
10,5 15
5 6,4 x 4
R6 x 2 18
F
6 17,3 21,8
52 37,7
43 35,45
9 20
1,5
36
6x 4 6,4 x 2
3,2 x 4
45
52 F 64 21,8 17,3
7,1
24,5 15 9,35
20,8 22,4
6 6 24
01014GB-2017/R01

01014GB-2017/R01
SOLENOID VALVES U 3/2
Series
direct operated
320
1
NC
in-line 3 2
1/8-1/4 NO
FEATURES
• Compact three way solenoid valves with orifice and pipe connection in valve
body
• Valves are designed to handle relatively high pressure 3-way applications
• Valves do not require a minimum operating pressure
GENERAL
-20°C to +90°C NBR (nitrile)
air, inert gas, water, oil
-20°C to +40°C UR (cast urethane)
Body Brass AISI 303 SS
Core tube Stainless steel Stainless steel
Core and plugnut Stainless steel Stainless steel
Seat Brass Stainless steel
Seals NBR NBR
Disc NBR or UR NBR or UR
Disc holder & core guide POM POM 2 1
Shading coil Copper Silver
3
U - universal (brass body)
prefix inrush holding hot/cold temperature type (1) 2 1
(VA) (VA) (W) (W) (C°) 230 V/50 Hz 24 V DC 3
34 15,6 6 7 / 9,7 -20 to +75 400325-117 400325-142 01
30 22,5 9 - -20 to +50 400325-217 - 01 U - universal (stainless steel body)
SC
55 23 10,5 9/11,2 -20 to +75 400425-117 400425-142 02
78 35 16,7 - -20 to +50 400425-217 - 02
Refer to the dimensional drawings on the following page
(1)
SPECIFICATIONS

coefficient
man. operator
man. operator
size size max. (PS) (W)

Kv
maintained
EPDM
min. air () water () oil () brass stainless steel
PTFE
impulse
FPM
CR
(mm) (m3/h) (l/min) ~ = ~ = ~ = ~ = ~/= ~/=

U - Universal, NBR seals and UR discs
SCB320B130 - MS MO V E - T
1/8 1,2 0,05 0,83 0 12 9 12 9 12 9 9 9,7
- SCB320A140 MS MO - - - T
1/4 0,8 0,02 0,33 0 27 19 28 21 28 21 16,7 11,2 SCB320A170 - MS MO - - - T
U - Universal, NBR seals and discs
7 4 7 4 7 4 10,5 11,2 SCB320A172 - MS MO V E J T
1,6 0,08 1,3 0
7 4,5 7 4,5 7 4,5 9 9,7 - SCB320-057 MS MO V E J T
7 4 7 4 7 4 16,7 11,2 SCB320B174 - MS MO V E J T
2,4 0,1 1,7 0 7 4,5 7 4,5 7 4,5 16,7 11,2 - SCB320A200 MS MO V E J T
1/4 3 3 3 3 3 3 6 9,7 - SCB320-059 MS MO V E J T
0,18 3 0 3,5 1,7 3,5 1,7 3,5 1,7 16,7 11,2 - SCB320A201 MS MO V E J T
3,2 0,21 3,5 0 3,5 1,7 3,5 1,7 3,5 1,7 16,7 11,2 SCB320B176 - MS MO V E J T
00070GB-2017/R01
0,27 4,5 0 2 1,5 2 1,5 2 1,5 9 9,7 - SCB320-061 MS MO V E J T

4,4 0,3 5 0 1,5 0,8 1,5 0,8 1,5 0,8 10,5 11,2 SCB320A178 - MS MO V E J T

SPECIFICATIONS
coefficient
man. operator
man. operator
Kv
maintained
EPDM
min. air () water () oil () brass stainless steel
PTFE
impulse
FPM
CR
(mm) (m3/h) (l/min) ~ = ~ = ~ = ~ = ~/= ~/=
NC - Normally closed, NBR seals and UR discs
1/8 1,2 0,05 0,83 0 20 17 20 17 20 17 9,0 9,7 SCB320B134 SCB320A144 MS MO - - - T
1/4 0,8 0,02 0,33 0 50 35 50 35 50 35 16,7 11,2 SCB320A180 - MS MO V - - T
NC - Normally closed, NBR seals and disc
15 11 15 11 15 11 16,7 11,2 SCB320A182 - MS MO V E J T
1,6 0,08 1,3 0
9 9 9 9 9 9 6,0 9,7 - SCB320-063 MS MO V E J T
8 4,5 8 4,5 8 4,5 9,0 9,7 - SCB320-093 MS MO V E J T
2,4 0,10 1,7 0
10 8 10 8 10 8 10,5 11,2 SCB320A184 SCB320A202 MS MO V E J T
1/4
0,18 3,0 0 6 4,5 6 4,5 6 4,5 10,5 11,2 - SCB320A203 MS MO V E J T
3,2 0,21 3,5 0 6 4 6 4 6 4 10,5 11,2 SCB320A186 - MS MO V E J T
0,27 4,5 0 3 3 3 3 3 3 6,0 9,7 - SCB320-065 MS MO V E J T
4,4 0,30 5,0 0 3 1,7 3 1,7 3 1,7 10,5 11,2 SCB320A188 - MS MO V E J T
NO - Normally open, NBR seals and UR disc
1/8 1,2 0,05 0,83 0 20 17 20 17 20 17 9,0 9,7 SCB320B138 SCB320A148 MS MO - - - T
1/4 0,8 0,02 0,33 0 55 40 55 40 55 40 16,7 11,2 SCB320A190 - MS MO - - - T
NO - Normally open, NBR seals and disc
16 11 17 11 17 11 16,7 11,2 SCB320A192 - MS MO V E J T
1,6 0,08 1,3 0
9 9 9 9 9 9 6,0 9,7 - SCB320-067 MS MO V E J T
8 4,5 8 4,5 8 4,5 9,0 9,7 - SCB320-095 MS MO V E J T
2,4 0,10 1,7 0
10 7 10 7 10 7 10,5 11,2 SCB320A194 SCB320A204 MS MO V E J T
1/4
0,18 3,0 0 5 4 5 4 5 4 10,5 11,2 - SCB320A205 MS MO V E J T
3,2 0,21 3,5 0 5 4 5 4 5 4 10,5 11,2 SCB320A196 - MS MO V E J T
0,27 4,5 0 3 3 3 3 3 3 6,0 9,7 - SCB320-069 MS MO V E J T
4,4 0,30 5,0 0 3 2 3 2 3 2 10,5 11,2 SCB320A198 - MS MO V E J T
OPTIONS
• Valves can also be supplied with FPM (fluoroelastomer), EPDM (ethylene-propylene), CR (chloroprene) and PTFE seals and
discs. Use the appropriate optional suffix letter for identification
• Waterproof enclosure with embedded screw terminal coil according to protection class IP67, CEE-10
• Electrical enclosures according to “NEMA” standards are available
• Compliance with “UL”, “CSA” and other local approvals available on request
• Mounting brackets for brass body valves, suffix MB
INSTALLATION
• Brass valves have 2 mounting holes in body
• Stainless steel valves are standard supplied with mounting brackets
• Pipe connection identifier is B = NPT (ANSI 1.20.3)
SPARE PARTS KIT & ACCESSORIES ORDERING EXAMPLES:

spare parts kit no. mounting SC B 320 A 170 230V / 50 Hz
catalogue number
~ = bracket no. SC B 320 A 194 MS 115V / 50 Hz
SCB320B130 C302084 C302190 160800 SC B 320 A 184 V 24V / DC
SCB320A140 C302086 C302206 (2) SC B 320 A 144 T 230V / 50 Hz
SCB320A170 C302112 C302200 160800
prefix
SCB320A172 C302114 C302201 160800
SCB320-057 C302102 C302212 (2) pipe thread voltage
SCB320B174/B176 C302116 C302201 160800 basic number suffix
SCB320A200 C302189 C302190 (2)
SCB320-059 C302106 C302212 (2) ORDERING EXAMPLES KITS:

SCB320A201 C312189 C312190 (2)
C302183(1)
SCB320-061 C302110 C302213 (2)
C302142 V
SCB320A178 C302118 C302202 160800 C302192 E
SCB320B134 C302124 C302217 160800
SCB320A144 C302126 C302235 (2) basic number suffix
00070GB-2017/R01
SCB320A180 C302140 C302226 160800

SCB320A182 C302141 C302227 160800

SPARE PARTS KIT & ACCESSORIES
spare parts kit no. mounting
catalogue number
~ = bracket no.
SCB320-063 C302150 C302240 162950-001(2)
SCB320-093 C302151 C302240 162950-001(2)
SCB320A184 C302142 C302227 160800
SCB320A202/A203 C312191 C312192 162950-001(2)
SCB320A186 C302143 C302228 160800
SCB320-065 C302152 C302241 162950-001(2)
SCB320A188 C302144 C302229 160800
SCB320B138 C302157 C302245 160800
SCB320A148 C302163 C302261 162950-001(2)
SCB320A190 C302182 C302254 160800
SCB320A192 C302183 C302255 160800
SCB320-067 C302176 C302266 162950-001(2)
SCB320-095 C302177 C302266 162950-001(2)
SCB320A194/A196 C302184 C302255 160800
SCB320A204 C312193 C312194 162950-001(2)
SCB320A205 C312193 - 162950-001(2)
SCB320-069 C302178 C302267 162950-001(2)
SCB320A198 C302185 C302256 160800
(1)
Standard prefixes/suffixes are also applicable to kits.
(2)
Mounting bracket supplied standard with valve.
- Not available

TYPE 01 TYPE 02
IEC 335 / ISO 4400 IEC 335 / ISO 4400
IP65 IP65
SCB320-057/-059/-061/-063/-093/-065 SCB320A170/A172/B174/B176/A178/A180/A182/A184/A186/
/-067/-095/-069 A188/A190/A192/A194/A196/A198
A F A F
B B
C C
360˚ 360˚ 360˚

J L bottom view J L
3
K mounting bracket K
2
2 1 X 3 3 2 9,5
2 1 X 3 1 2
==
2 x M4 x 7
D G 11,1
E H 2xØ7 = G = G = =
E H
SCB320130/B134/B138/A140/A144/A148 SCB320A200/A201/A202/A203/A204/A205
A F
A F B
B
C C
view on mounting
bottom view
bracket (V) 360˚
mounting bracket
J
360˚ L
J L 4,5 K 2XØ7
2 Ø M4
3 2
2,4
K 2 1
3 V
2 X 3
2 1 3
11
= =
X
11
= =
D
E G E H = G =
prefix catalogue
type A B C D E F G H J K L X weight (2)
option number
SCB320-057/-059/-061/-063/-093/-065/-067/-095/-069 75 45 27 22 36 39 46 62 58 82 96 42 0,54
01 SC
SCB320B130/B134/B138/A140/A144/A148 75 45 27 - 39 39 33 - 56 79 95 34 0,40
00070GB-2017/R01
SCB320A170/A172/B174/B176/A178/A180/A182/A184/A186/A188/
80 50 30 - 43 45 21 36 70 96 108 45 0,57
02 SC A190/A192/A194/A196/A198
SCB320A200/A201/A202/A203/A204/A205 80 50 30 22 40 45 46 62 69 94 111 45 0,67
(2)

00070GB-2017/R01
SOLENOID VALVES NC
1
3/2
Series
direct operated
3 2
in-line U 370
1/4 NO
FEATURES
• Solenoid valves with three ports in body enabling convenient installation
• Coils interchangeable without dismantling the valve
• Optional maintained or impulse manual operator
GENERAL
Response time 5- 20 ms
NBR (nitrile)
air, inert gas, water, oil -25°C to +80°C
VMQ (silicone)

Body Brass AISI 316L (1.4404)
Internal parts Stainless steel, plastic Stainless steel
Seats Brass Brass
Discs NBR (FPM or EPDM) NBR (FPM or EPDM)
O’rings VMQ VMQ 3
Disc holder and core guide POM POM
Shading coil Copper Copper
2 1
Coil insulation class F NC function (brass body)
Standard voltages DC (=): 24V - 48V
(Other voltages and 60 Hz on request) AC (~): 24V - 48V - 115V - 230V / 50 Hz 3
option ~ ~ = range (TS) ~ = 2 1
(VA) (VA) (W) (W) (C°) 230 V/50 Hz 24 V DC
SC 55 23 10,5 9 / 11,2 -25 to +60 400425-117 400425-142 01 U function (stainless steel body)
Refer to the dimensional drawings on the following page..
(1)
SPECIFICATIONS
flow operating pressure options
orifice catalogue
pipe coefficient differential (bar) power coil

size number
man. operator
size Kv max. (PS) (W)

maintained
EPDM
2 1 2 1 /1 3 min. air () water/oil () brass stainless steel

FPM
(G*) (mm) (m3/h) (l/min) ~ = ~ = ~ = ~ = ~ =

2 0,11 1,8 0 16 16 16 16 10,5 11,2 SCE370A016 SCE370A016 SCE370A046 SCE370A046 MS V E
1/4 2,7 0,2 3,3 0 10 10 10 10 10,5 11,2 SCE370A017 SCE370A017 SCE370A047 SCE370A047 MS V E
3,8 0,3 5 0 5 5 5 5 10,5 11,2 SCE370A018 SCE370A018 SCE370A048 SCE370A048 MS V E
U - Universal
NO - Normally open
00071GB-2017/R01

OPTIONS
• Valves can also be supplied with FPM (fluoroelastomer) and EPDM (ethylene-propylene) seals and discs. Use the appropriate
optional suffix letter for identification
• Waterproof enclosure with embedded screw terminal coil according to protection class IP67, CEE-10 (prefix WP or WS)
• Class H coil (10,5 W/11,2 W), prefix HT, example: SCHTE370A016
• Impulse or maintained manual operator, suffix MO (brass body valves)
• Oxygen service with seals and disc in FPM, suffix N, example: SCE370A016NV
• Mounting holes on stainless steel version: 2 ØM4, 7 mm depth, available on request, please contact us
INSTALLATION
• Brass body solenoid valves have 2 mounting holes in body
• Pipe connections (G*) have standard combination thread according to ISO 228/1 and ISO 7/1
SPARE PARTS KIT ORDERING EXAMPLES:

spare parts kit no. SC E 370 A 016 MS 230V / 50 Hz
catalogue number maintained SC E 370 A 046 V 115V / 50 Hz
~ = man. operator SC E 370 A 061 24V / DC
SCE370A016/017/018 C140044 C140044 C140048
SCE370A046/047/048 C140044 C140044 C140072 prefix
SCE370A061/062/063 - C140043 C140048 pipe thread voltage
SCE370A026/027/028 C140047 C140047 C140048 basic number suffix
SCE370A056/057/058 C140047 C140047 C140072
SCE370A064/065/066 - C140046 C140048
SCE370A021/022/023 C140045 C140045 C140048
ORDERING EXAMPLES KITS:
SCE370A051/052/053 C140045 C140045 C140072 C140044(1)
Standard suffixes E and V are also applicable to kits.
(1) C140043 V
- Not available C140045 E
basic number suffix

TYPE 01
Prefix “SC” Solenoid
Epoxy moulded
IEC 335 / ISO 4400
IP65
Type 01: SCE370A016/017/018/026/027/028/021/022/023 Type 01: SCE370A046/047/048/056/057/058/051/052/053
41 41 A 41 41 A
=F= B =F = B
C C
360˚ 360˚
116 116
97 1 97 1
19 2 2
47 2 1 3 1 2 9,4 47 2 1 3 1 2 9,4
3 21 21 16,3 3 21 21 16,3
3 25 R : 23,5 21,5
43 = 43 = == 11,2
E 15,5 21,5 == 11,2 E 2 15,3
type prefix option catalogue number A B C E F weight (2) 1 Manual operator location.
SCE370A016/017/018/026/027/028/ 2
Mounting 2 Ø M4, 7 mm depth (Option with
85 50 30 86 45 0,600 (3)
021/022/023 stainless steel body valves).
01 SC
SCE370A046/047/048/056/057/058/ 3 Impulse or maintained manual operator
85 50 30 86 45 0,820
051/052/053 (suffix MO).
00071GB-2017/R01
(2)
including coil and connector. (3)
+0,030 kg with push-turn manual operator.

SOLENOID VALVES 3/2
Series
direct operated, high flow 2
balanced poppet U 327

1 3
1/4 - 1/2
FEATURES
• The valves are certified according to IEC 61508 Functional Safety data and have
SIL-3 capability (TÜV & Exida certification)
• The solenoid valves are recommended for pilot applications with basic flow (Ø5,5 mm)
or high flow (Ø12 mm), wide pressure ranges and no minimum operating pressure
• PTFE rider rings and graphite-filled PTFE seals reduce friction and eliminate sticking
• Dedicated execution for extreme low ambient temperatures
• Manual Operators are optional including an under pressure removable type
GENERAL
Differential pressure 0 - 10 bar [1 bar =100 kPa]
Response time < 100 ms
-20°C to +120°C FPM (fluoroelastomer)
5,7 mm air, inert gas, water, oil -40°C to +40°C VMQ (silicone)
-50°C to +60°C (F)VMQ ((fluoro)silicone)
-25°C to +60°C NBR (nitrile)
12 mm air, inert gas -10°C to +90°C FPM (fluoroelastomer)
-50°C to +60°C (F)VMQ ((fluoro)silicone)
Body Brass or stainless steel AISI 316L
Stem, core tube Stainless steel
Core and plugnut Stainless steel 1
Springs Stainless steel 2
Seals & poppets Ø 5,7 mm: FPM or VMQ or (F)VMQ 3
Ø 12 mm: NBR or FPM or (F)VMQ
Rider ring PTFE
5,7 mm orifice
Coil insulation class H
(Other voltages and 60 Hz on request) AC (~) : 24V - 48V - 115V - 230V(2) / 50 Hz 1
power ratings operator 2
prefix inrush holding hot/cold temperature 3
type (1)
(VA) (VA) (W) (W) (C°) 230 V/50 Hz 24 V DC
10 10 10 9 / 11,2 -40 to +55 123664-017 400425-142 01 12 mm orifice
3,7 3,7 3,7 3,2 / 3,6 -40 to +55 (2)
400923-042 02
SC
10 10 10 9 / 10 -40 to +60 400924-197 400923-342 02
14,1 14,1 14,1 11 / 14 -40 to +90 400924-697 400923-642 02
(1)
3,7 W: Limited to max. 115 V / 50 Hz / Replacement coil 115 V/50 Hz: 400924-098
(2)
SPECIFICATIONS
pipe orifice power coil
man. operator (4)
man. operator (4)
coefficient number
Kv
maintained
min.. air () water() brass stainless steel

impulse
G (mm) (m3/h) (l/min) ~ = ~ = ~ = ~/= ~/=

U - Universal, FPM seals and poppets
10 11,2 SCG327B001 SCG327B002 MS(3) MO - -
5,7 0,45 7,5 0 10 10 10 10
1/4 3,7 3,6 SCG327B101 SCG327B102 MS(3) MO - -
12 1,5 25 0 10 10 - - 14,1 14 SCG327A649 SCG327A650 MS(3) MO - -
1/2 12 1,5 25 0 10 10 - - 14,1 14 SCG327A609 SCG327A610 MS(3) MO - -
U - Universal, NBR seals and poppets
1/4 SCG327A647 SCG327A648 MS(3) MO - -
12 1,5 25 0 10 10 - - 10 10
1/2 SCG327A607 SCG327A608 MS(3) MO - -
U - Universal, VMQ seals and poppets
1/4 5,7 0,45 7,5 0 10 10 10 10 10 11,2 SCG327B011 SCG327B012 MS(3) MO - -
U - Universal, (F)VMQ seals and poppets
SCG327B111 SCG327B112 MS(3) MO - -
00073GB-2017/R01
5,7 0,45 7,5 0 10 10 10 10 3,7 3,6

1/4
12 1,5 25 0 10 10 - - 10 10 SCG327A645 SCG327A646 MS(3) MO - -
1/2 12 1,5 25 0 10 10 - - 10 10 SCG327A605 SCG327A606 MS(3) MO - -
Functional Safety certification is not applicable with this feature.
(3) (4)
Under pressure removable execution (Consult our catalogue «Pilot Valves and
Systems for the Process Industry» at: www.asco.com

OPTIONS
• Compliance with "UL", "CSA" and other local approvals available on request
• 3/8” pipe thread executions are available on request
• Manual reset construction
• Stainless steel exhaust protector for valves certified to IEC 61508 Functional Safety, catalogue number: 34600419 (G1/4) or 34600479 (G1/2)
INSTALLATION
• Solenoid valves have 2 or 3 mounting holes in body

spare parts kit no. SC G 327 B 001 230V / 50 Hz
catalogue number
~ SC G 327 B 101 MS 115V / 50 Hz
SCG327B001/002 C123670 SC G 327 A 647 24V / DC
SCG327B011/012 C131237 SC G 327 B 002 MO 230V / 50 Hz
SCG327B101/102 C132251
prefix
SCG327B111/112 C132253
SCG327A605/606/645/646 C117638 pipe thread voltage
SCG327A607/608/647/648 C117640 basic number suffix
SCG327A609/610/649/650 C117640V
(1) ORDERING EXAMPLES KITS:
C123669(1)
C132251
C132640 V
basic number suffix

TYPE 01-02 TYPE 02
IEC 335 / ISO 4400 IEC 335 / ISO 4400
IP65 IP65
Type 01: SCG327B001/002/011/012 SCG327A605/606/607/608/609/610/645/646/647/648/649/650
Type 02: SCG327B101/102/111/112
F
? A
F A B
B C
C
360˚
J 3 x Ø 5,5
L J
K
1 2
12
P K 1
3 M G X
N P
23
24
M 48 X
G 62
2 x Ø 5,5 27
H S N 2
41 1
D 3
E R 32 Q 1
30 S
D
H E
R
1 Manual operator location (Type MO/MS)
prefix
type catalogue number A B C D E F G H J K L M N P Q R S X weight (2)
option
01 SC SCG327B001/002/011/012 86 50 30 55 88 45 35 30 55 90 114 24 23 167 - 29 54 48 0,95
00073GB-2017/R01
SCG327B101/102/111/112 92 56 33 55 91 50 35 30 74 109 108 24 23 162 - 29 54 48 1,05

02 SC SCG327A605/606/607/608/609/610/
645/646/647/648/649/650 92 56 33 60 100 50 54 30 81 135 - 32 38 189 40 29 54 76 1,6
(2)

SOLENOID VALVES NC
A
3/2
Series
direct operated, coaxial
387
C B
for high pressure fluids B C
3/8 to 1 NO
A
FEATURES
• Coaxial-type solenoid operated valve designed for high flow rates with low
pressure loss
• Compatible with viscous or abrasive gases and liquids
• Suitable for high pressure applications
• Solenoid operated valve designed for long service life
• Vacuum operation up to 10-4 mbar
• The valves satisfy article 4.3 of Pressure Equipment Directive 2014/68/EU
GENERAL
Differential pressure 40 bar (B A : 12 bar) [1 bar =100 kPa]
Response time (air operation ∆P = 4 bar) 3/8 1/2 3/4 1
opening time (ms) 45 60 105 150
closing time (ms) 70 130 150 190
air and gas groups 1 & 2 FPM (fluoroelastomer)
-20°C to +100°C
water, oil, liquids groups 1 & 2 PTFE
B
Body Brass
Internal parts Brass
Tube Stainless steel
Seals FPM /PTFE
Disc seal FPM
Coil insulation class H
Connector (rectifier for AC) Spade plug (cable Ø 6-8 mm)
with indicator LED
Standard voltages DC (=) : 24V
AC (~) : 115V - 230V / 50 Hz C
power ratings
(integrated coil operator replacement coil
pipe ambient
prefix size DC (=), cold) temperature type (1)
option 115 V 230 V 24 V range (TS)
~ =
~ ~ ~/= A
G (W) (W) (W) (C°) 230 V/50 Hz 24 V DC
NC function
3/8 40 42 35
1/2 45 55 51
SC -20 to +60 - - 01
3/4 62 60 53
1 68 69 60

(1)
SPECIFICATIONS
operating pressure
flow differential (bar)
pipe coefficient power coil catalogue
DN max. (PS)
size Kv (W) number
air/gas/water/oil ()
min.
A B A C B A B A A C A B
G (m /h) (l/min) (m3/h) (l/min)
3
~ = ~/= ~/= ~ = ~/=
3/8 10 2,2 36,6 1,6 26,6 0 12 12 40 40 42 35 SCG387A001
1/2 15 5,2 86,6 3,6 60 0 12 12 40 40 55 51 SCG387A002
3/4 20 7,5 125 5,6 93,3 0 12 12 40 40 60 53 SCG387A003
1 25 12,2 203,3 10,2 170 0 12 12 40 40 69 60 SCG387A004
NO - Normally open
3/8 10 2,2 36,6 1,6 26,6 0 12 12 40 40 42 35 SCG387A005
1/2 15 5,2 86,6 3,6 60 0 12 12 40 40 55 51 SCG387A006
3/4 20 7,5 125 5,6 93,3 0 12 12 40 40 60 53 SCG387A007
00074GB-2017/R01
1 25 12,2 203,3 10,2 170 0 12 12 40 40 69 60 SCG387A008

OPTIONS
• Connector rectifier: 115 V AC, catalogue number: 88122635; 230 V AC, catalogue number: 88122634
INSTALLATION

mounting SC G 387 A 001 230V / 50 Hz
catalogue number spare parts kit no.
bracket no. SC G 387 A 005 115V / 50 Hz
SCG387A001/005 C140209 C140130 SC G 387 A 008 24V / DC
SCG387A002/006 C140211 C140131
prefix
SCG387A003/007 C140213 C140132
pipe thread voltage
SCG387A004/008 C140215 C140133
basic number suffix

C140209
C140213
basic number

TYPE 01
IEC 335 / ISO 4400
IP65
1
90˚
48
12
G
H
J
2
P Q
K M
D
Pressure inlet:
•N
C function = Port B
•N
O function = Port C
1 Connector rectifier for AC (~)

2 2 mounting holes Ø M5, depth 7 mm
type prefix option G D H J K M P Q X Y Z weight (1)

3/8 166 50 32 46 85 32 37 24 111 6 2,0
1/2 200 70 41 58 103 38,5 60 38 136 6 4,1 x
01 SC Z Y
3/4 229 80 46 71 111 45,5 72 45 151 7 6,0
00074GB-2017/R01
1 249 90 55 73 121 48 80 50 165 7 8,1 Mounting brackets

Including connector (without mounting brackets).
(1)

MINI-SOLENOID VALVES NC
2
3/2
Series
ISO 15218 (CNOMO, size 15) interface
3 1
direct operated, pad mounting body NO

2
3 1
302
2
connector size 15 U
3 1
FEATURES
• Compact, monobloc solenoid pilot valve with spade-plug connector type EN 175301-803,
industry standard form C, with 9,4 mm spacing, or to EN 175301-803, form C, with 8 mm
spacing
• Version with or without integrated LED and electrical protection
LED indicator visible from 3 sides
GENERAL
Differential pressure See «SPECIFICATIONS» [1 bar = 100 kPa]
Pneumatic base ISO 15218 (CNOMO E06.36.120N, size 15)
Connection Subbase
-10°C to +50°C (LP1) (1)
air or inert gas NBR (nitrile)
filtered at 50 µm, lubricated or not -25°C to +60°C (LP2) (1) FPM (fluoroelastomer)
-25°C to +60°C /+50°C (LP3) (1)
(1)
LP1, LP2, LP3: see "electrical characteristics" table

Body PARA
Internal parts POM, PET, stainless steel and brass PNEUMATIC
Seals NBR (disc), FPM (others) CNOMO
Pneumatic interface seal TPE interface
OTHER MATERIALS (standard)
Coil Thermoplastic PET
Connector specification EN 175301-803, industry standard form B (9,4 mm) PNEUMATIC-ELECTRIC
or EN 175301-803, form C (8 mm) interface
Electrical safety IEC 335 (available on request)
(Other voltages on request) AC (~) : 24V - 115V - 230V / 50-60 Hz
coils power ratings (✧) operator
ambient
voltages inrush holding hot/cold temperature type (2) (✧) Nominal power ratings of versions without
power (V) ~ ~ = range (3) (TS) LED indicator and electrical protection.
ranges
~ = (VA) (VA) (W) (W) (°C)
For versions with LED indicator and electrical
LP1 - 24 - - - 0,5 / 0,55 -10 to +50 protection, add:
LP2 24-115 24 1,4 1,2 1,1 1 / 1,2 -25 to +60 01 0,15 W with DC (=)
LP3 230 24 2,1 1,6 1,5 2 / 2,65 -25 to +60 (~)/+50 (=)(3) 0,4 W / VA with AC (~)
(2)
Refer to the dimensional drawings on the following page. (3)
With LED and joinable subbase mounting, see following pages
SPECIFICATIONS (NO and U, following page)

flow basic catalogue number
orifice operating pressure manual operator

at 6 bar coefficient power
size differential (bar) impulse maintained
l/min (ANR) Kv ranges
9,4 mm 8 mm 9,4 mm 8 mm
(mm) 1 2 2 3 1 2 2 3 min. max. (PS) ~ = = ~ = =
NC - Normally closed (Without LED and protection)
0 8 LP1 - 30211106 - - 30211107 -
0,6 11 20 0,11 0,26
0 10 LP2 30211109 30210109 30211110 30210110
0,8 17 28 0,22 0,35 0 8 LP2 30211112 30210112 30211113 30210113
0 5 LP2 30211118 30210118 30211119 30210119
1,1 32 51 0,35 0,50
0 10 LP3 30211121 30210121 30211122 30210122
0 3 LP2 30211124 30210124 30211125 30210125
1,5 39 53 0,50 0,56
0 6 LP3 30211127 30210127 30211128 30210128
NC - Normally closed (With LED and protection) (4)
0,6 11 20 0,11 0,26 0 10 LP2 30215109 30214109 30215110 30214110
0,8 17 28 0,22 0,35 0 8 LP2 30215112 30214112 30215113 30214113
0 5 LP2 30215118 30214118 30215119 30214119
1,1 32 51 0,35 0,50
0 10 LP3 30215121 - 30215122 -
0 3 LP2 30215124 30214124 30215125 30214125
1,5 39 53 0,50 0,56
0 6 LP3 30215127 - 30215128 -
00075GB-2017/R01
(4)
Only available in 24 V AC/DC and 115 V AC. When ordering, please specify in addition to the basic catalogue number:
~ = the type of current: voltage / frequency + the version: with or without connector
with connector --A --D to be inserted after Examples: • with connector 24V DC : 30211109--D 24V DC
without connector --L --P the basic catalogue number • without connector 24V DC : 30211109--P 24V DC
MINI-SOLENOID VALVES SERIES 302
SPECIFICATIONS: NO, U
flow basic catalogue number
orifice operating pressure manual operator
size differential (bar) impulse maintained
l/min (ANR) Kv ranges
9,4 mm 8 mm 9,4 mm 8 mm
(mm) 1 2 2 3 1 2 2 3 min. max. (PS) ~ = = ~ = =
NO - Normally open (Without LED and protection)
0 8 LP2 30211130 30210130 30211131 30210131
0,8 20 17 0,26 0,20
0 10 LP3 30211133 30210133 30211134 30210134
0 5 LP2 30211136 30210136 30211137 30210137
1 28 32 0,35 0,35
0 8 LP3 30211139 30210139 30211140 30210140
0 2 LP2 30211142 30210142 30211143 30210143
1,5 53 39 0,56 0,50
0 6 LP3 30211145 30210145 30211146 30210146
NO - Normally open (With LED and protection) (5)
0 8 LP2 30215130 30214130 30215131 30214131
0,8 20 17 0,26 0,20
0 10 LP3 30215133 30214133 30215134 30214134
0 5 LP2 30215136 30214136 30215137 30214137
1 28 32 0,35 0,35
0 8 LP3 30215139 - 30215140 -
0 2 LP2 30215142 30214142 30215143 30214143
1,5 53 39 0,56 0,50
0 6 LP3 30215145 - 30215146 -
1 2 2 3 1 2 2 3
U - universal (Without LED and protection)
0,8 17 20 0,20 0,26 0 6 LP2 30211148 30210148 30211149 30210149
U - universal (With LED and protection) (5)
0,8 17 20 0,20 0,26 0 6 LP2 30215148 30214148 30215149 30214149
(5)
Only available in 24 V AC/DC and 115 V AC.
When ordering, please specify in addition to the basic catalogue number:
the type of current: voltage / frequency + the version: with or without connector
~ =
with connector --A --D to be inserted after Examples: • with connector 24V DC : 30211130--D 24V DC
without connector --L --P the basic catalogue number • without connector 24V DC : 30211130--P 24V DC
OPTIONS AND ACCESSORIES
• Seals and disc made of FPM (fluoroelastomer)
• Versions without manual operator and Uv (Universal vacuum): contact us
• Version with pneumatic-electric interface
• Version 12 V DC, LP2, connector EN 175301-803, industry standard form C (9,4 mm)
• Connector EN 175301-803, form C (8 mm): (www.asco.com)
- standard: catalogue number 88130211
- with cable 2 m length: Contact us
• Connector EN 175301-803, industry standard form C (9,4 mm): (www.asco.com)
- standard: catalogue number 88143581
- with cable 2 m length: catalogue number 88143567
• Explosionproof enclosures for use in zones 0/20-1/21-2/22, categories 1-2-3 to ATEX-Directive 2014/34/EU (www.asco.com)
INSTALLATION
• Solenoid valve supplied with mounting screws and mounting pad seal(s)
TYPE 01
IEC 335 / EN 175301-803
IP65 connection Subbase mounting surface: ISO 15218
function 1 2 3 (CNOMO E06.36.120N, size 15)
NC P O E
3
NO E O P 3xØ2
MIX P2 O P1 2 x Ø 3,5
universal
90˚
SEL O2 P O1
3 3,8 3,8
56
47
41
8,2
3 P: Pressure O: Outlet
1 E: Exhaust
9,7
8,2
2 2 = =
1 15
4,5 20 9,7 = =
50 15
00075GB-2017/R02
1 Manual operator location

weight (1)
2 2 mounting screw M3 x 20 0,047
3 Version with LED and electrical protection (1)
with standard connector.

MINI-SOLENOID VALVES 3/2
Series
ISO 15218 (CNOMO, size 15) interface 2
direct operated, pad mounting body NC 302

3 1
connection M12 or with cable ends
FEATURES
• Compact, monobloc solenoid pilot valve with M12 connector or cable ends
• Version with integrated LED indicator and electrical protection.
LED indicator visible from 3 sides
GENERAL
Pneumatic base ISO 15218 (CNOMO E06.36.120N, size 15)
Connection Subbase
air or inert gas NBR (nitrile)
filtered at 50 µm, lubricated or not -25°C to +60°C (LP2) (1)
(1)
LP2: see "electrical characteristics" table

Body PAA
Internal parts POM, PET, stainless steel and brass
Pneumatic interface seal TPE
OTHER MATERIALS
Coil Thermoplastic PET
Connection Connector M12 or cable ends
connector M12 CNOMO E03.62.520.N
cable ends EN 60730 321

coils power ratings (✧) operator
ambient
power voltages inrush holding hot/cold temperature type (2)
(V) ~ ~ = range (3) (TS) (✧) Nominal power ratings of standard versions
ranges
~ = (VA) (VA) (W) (W) (°C) (with LED indicator and electrical protec-
LP2 - 24 - - - 1,15 / 1,35 -25 to +60 01-02-03 tion)
(2)
Refer to the dimensional drawings on the following page. (3)
For joinable subbase mounting, see pages suivantes.
SPECIFICATIONS
flow
orifice operating pressure basic catalogue number
size differential (bar)
l/min (ANR) Kv ranges manual operator
(mm) 1 2 2 3 1 2 2 3 min. max. (PS) impulse maintained

NC - Normally closed, connection M12 + LED and protection
0,6 11 20 0,11 0,26 0 10 LP2 30212109 30212110
0,8 17 28 0,22 0,35 0 8 LP2 30212112 30212113
1,1 32 51 0,35 0,50 0 5 LP2 30212118 30212119
1,5 39 53 0,50 0,56 0 3 LP2 30212124 30212125
NC - Normally closed, cable ends + LED and protection
0,6 11 20 0,11 0,26 0 10 LP2 30213109 30213110
0,8 17 28 0,22 0,35 0 8 LP2 30213112 30213113
1,1 32 51 0,35 0,50 0 5 LP2 30213118 30213119
1,5 39 53 0,50 0,56 0 3 LP2 30213124 30213125
When ordering: M12 cable

with connector --D
to be inserted after
without connector --P
the basic catalogue number
complete --D
Examples: • M12 with connector : 30212109--D
• M12 without connector : 30212109--P
• cable ends : 30213109--D
00075GB-2017/R01


• Seals and disc made of FPM (fluoroelastomer)
• Versions without manual operator, NO (Normally Open), U (Universal) and Uv (Universal vacuum): contact us
• Version with pneumatic-electric interface
• Straight M12 connector:
- with 5 m cable length: catalogue number 88130212
INSTALLATION
• Solenoid valve supplied with mounting screws and mounting pad seal(s)

TYPE 01 TYPE 02
IEC 335 IEC 335 /
Connection M12 Straight M12 connector, 5 m cable length
IP67 IP67
47
47
3 23,8 3
14,8
1 1
8,2
8,2
2 2 2
1 1
9,7 9,7
= = 4,5 20 ==
4,5 20 15 15
= =
= =
75 17
39 17 = =
= =
1 Manual operator location.

2 2 mounting screw M3 x 20
weight connection
M12 (1) function 1 2 3
cable ends
(1) (2)
NC P O E
0,049 0,288 0,040 P: Pressure O: Outlet
(1)
Without connector E: Exhaust
(2)
With connector
TYPE 03
IEC 335
Cable ends 0,3 m length Subbase mounting surface: ISO 15218
IP67 (CNOMO E06.36.120N, size 15)
3xØ2
2 x Ø 3,5
3 3,8 3,8
8,2
47
3
1 9,7
= =
2 15
8,2
2
= =
1
4,5 20 9,7
00075GB-2017/R02
22,5 15


Single subbase
Aluminium or brass
90°
5 Mounting: 2 holes M3, depth 4,5
60
1
3 Orifice (2) can be connected on the left
45
or on the right of the subbase.

2 2 2
20
15
10
material catalogue number weight (1)

aluminium 88263002 0,011
9 1
2,5
3 x Ø M5 brass 30300001 0,034
15 15 (1)
subbase alone
65
Adapter CNOMO size 30

(only for NC version)
Aluminium
2
3
90˚
63
1 Mounting: 2 screws M4 x 10 (supplied)

48
2
catalogue number weight (2)
7,5
26
14,5
1 88263001 0,018
1 (2)
adapter alone
6,5 10 21
= =
60 29
= =
Joinable subbases
Aluminium
13
21,5
8,5 3 4 5
2
58
3 3
21,5
1 1
14,5
19
11
2 2
3,5
8,5 17 17 17 8,58,5 17 8,5

13 68 34 30 50
(4x) (2x)
L
Ports 1 and 3: G1/8 catalogue number x subbases L weight (3)

Port 2: coupling for 4mm OD tube 35500564 2 2x - 0,076
35500565 4 4x - 0,148
1 Fixing hole Ø 3,2 (2 for 4x ; 1 for 2x) 35500566 6 4x + 2x 114 0,236
35500567 8 4x + 4x 148 0,313
2 Fixing hole M3, depth 8 (2 for 4x ; 1 for 2x)
00075GB-2017/R01
35500568 10 4x + 4x + 2x 182 0,389

3 Mating surface blanking plates (option) 35500569 12 4x + 4x + 4x 216 0,466
4
(3)
subbases alone
TS35 DIN rail (not supplied)
x = place for mini-solenoid valves.
5 Clip for DIN rail mounting (option) 2 plugs R1/8 supplied.


• Additional subbase with 2 places (with seals): catalogue number 35500570
• 2 tie-rods + nuts for a subbase with:
4 places: catalogue number 88100752
• Mounting kit for DIN rail (2 clips + screws + washers): catalogue number 88100757
• Mating surface blanking plate: catalogue number 88130203
AMBIENT TEMPERATURE RANGES
power coil
current power
version
type range inrush/
hot/cold
holding (W)
(VA) =
~
LP1 (1) - 0,5/0,55 standard -10°C ; +50°C -10°C ; +50°C
- 1/1,2 standard -25°C ; +60°C
DC LP2 (1) -25°C ; +60°C
- 1,15/1,35 LED + protection -25°C ; +40°C
(=) - 2/2,65 standard -25°C ; +50°C -25°C ; +40°C
LP3 (2)
- 2,15/2,8 LED + protection -25°C ; +40°C -
1,4/1,2 - standard
LP2 (2) -25°C ; +60°C -25°C ; +40°C
AC 1,8/1,6 - LED + protection
(~) LP3 (2)
2,1/1,6 - standard -25°C ; +60°C -25°C ; +40°C
2,5/2 - LED + protection -25°C ; +50°C -
(1)
Voltage: -15% / +20%
(2)
Voltage: -15% / +10%
00075GB-2017/R01

SOLENOID VALVES NC
2
3/2
Series
ISO 15218 (CNOMO, size 30) interface
direct operated, pad mounting body
3 1
2
189
subbases for instant fittings or 1/8 thread NO
3 1
FEATURES
• CNOMO pad-mount version for valve piloting applications
• Compact size and low weight for easy installation on single or joinable subbases
• AC/DC interchangeability of the solenoid operator without any need for disas-
sembly of the valve
• Version with M12 connection with visual indication and peak voltage suppression
conforming to “UL” standards
• Flexible installation on joinable subbases
• Manual operator as standard
GENERAL
Differential pressure See “SPECIFICATIONS” [1 bar =100 kPa]
air, inert gas -10°C to +60°C NBR (nitrile)
Body PA, glass-filled
Core tube Stainless steel
Core and plugnut Stainless steel
Internal parts, springs Stainless steel
Seals NBR 3
Shading coil Copper
CONSTRUCTION
Mounting pad ISO 15218 (CNOMO 06-05-80 / NF E 49066, size 30)
Connector Spade plug (cable Ø 6-8 mm) or M12
Connector specification DIN 43650, 11 mm, industry standard B
or CNOMO E03.62.520.N (M12)
Standard voltages DC (=): 24V - 48V (M12: 24 V + LED and protection)
(Other voltages and 60 Hz on request) AC (~): 24V - 48V - 115V - 230V / 50 Hz
inrush holding hot/cold temperature
- type (1)
~ ~ = range (TS) ~ = 1 2
(VA) (VA) (W) (W) (C°) 230 V/50 Hz 24 V DC
43004422 43004166 01 NC function
- 6 3,5 2,5 2,5 / 3 -10 to +60
- 43005523 06
(1)
SPECIFICATIONS
flow operating pressure
orifice catalogue number
size
size Kv max. (PS) (W) with maintained manual operator
1 2 2 3 1 2 2 3 min. air () DIN connector M12 connection
(mm) (mm) (m3/h) (l/min) (m3/h) (l/min) ~ = ~ = ~/= =
pad 2,5 3 18900001 -

1,2 1,5 0,042 0,7 0,048 0,8 0 10 10
mounting (2) - 3 - 18900073
NO - Normally open
pad 2,5 3 18900010 -
1,2 1,5 0,042 0,7 0,036 0,6 0 6 (5) 6 (5)
mounting (2) - 3 - 18900075
EMBASES
pipe
designation composition catalogue number
size
6/6 polyamide subbases
single subbase (instant fittings OD 4 mm) 35300069
joinable subbase (instant fittings OD 4 mm) 35300070
set of 2 joinable end subbases, Ø 6mm
instant right-hand pressure intake, 35300071

fittings (3) endpieces with instant fittings OD 6 mm Ø 4mm
Ø 6mm Ø 6mm
set of 2 joinable end subbases,
right-hand and/or left-hand pressure intake, 35300072 (4)
endpieces with instant fittings OD 6 mm Ø 4mm
Zamak subbases
laterally-connected single subbase 35300047
00076GB-2017/R01
G 1/8 (3)
tapped laterally-connected joinable subbase 35300048
(2)
Port 3: M5. (4)
The equipment can be used for two different pressure intakes, sup-
(3)
These subbases can be mounted on omega rail to EN 50022 using 2 clips plied with one blanking plug to cover unused port.
(clips sold in packs of 10, catalogue number: 33400036). (5)
10 bar on request (with 5W/6,9W coil)

OPTIONS
• Straight M12 connector (IP67 protection with connector correctly installed): with 5 m cable: catalogue number 88130212
• Right-angle M12 connector (IP67 protection with connector correctly installed), with 5 m cable: catalogue number 88130213
• M5 flow control regulator to fit port 3, catalogue number: 34600380
INSTALLATION
• Mounting on single or joinable subbases
• ATEX 2014/34/EU versions (options “SG” and “PV”) can be installed on single (all versions) or joinable zink diecast subbases
• Pipe connections 1/8 have standard thread according to ISO 228/1
ORDERING EXAMPLES:
DIMENSIONS (mm), WEIGHT (kg) 18900001 230V / 50 Hz
TYPE 01-06 18900073 24V / DC
TYPE 02
Spade plug /M12 Single instant fitting
IEC 335 / DIN 43650 / voltage
subbase
E03.62.520.N Polyamide basic number options
IP65
18900001/18900010/18900073/18900075 35300069
2 Port 3: M5, depth 5,5 mm
52
3 Mounting: two CM4x20 screws
4 16,5 53 (M12)
4 Instant-fitting connection for OD 4 mm tube
48 (M12)
8
5 5 Mounting: two dia. 3,5 mm securing holes,
69
64
2 1 2
3 2 2 dia. 6,5 mm counter-bores, depth 3,5 mm
4 22,5
30
360˚
7,5
26
= =
1 1 1
6 Instant-fitting connection for OD 6 mm tube
14
7 13 21 13
13
16
= =
20 7 Mounting: two dia. 4,5 mm securing holes
50 29= 70 23
= =
8 Adaptable clips
=
68 88 33=
= 9 Subbase mounting hole, adapter
TYPE 03 TYPE 04 TYPE 05

Joinable instant fitting subbase Single subbase Joinable subbase
Polyamide Zamak Zamak
35300070 35300047 35300048
35300071 (set of 2)
28,5 31
4 13 20,5 20,5
45 (M12)
45 (M12)
51 (M12)
2 8 2 9 2
3,5 30 6
7
3,5 30 6
71
71
67
7 2
2 2 2 2
36
36
1
10
20
30
1 7 1 1 1 1
1
6 10 15 2 x G1/8 17 2 x G1/8 = 21 == 21 =
9
6,5
20 8 B 8 25 = 21 = 8 25 B
70 A 5 92 31= 92 A
=
88
Joinable subbases assembled with adapter
Right-hand pressure intake option or 2 different locked by sunk set screws.
pressure intakes by procuring the set of two end For DIN rail mounting:
subbases with endpieces (catalogue number: see type 03.
35300072).
When mounted on DIN rail, it is recommended to
use a securing clip on the end subbases as well
as on the central subbase.
number of type 03 type 05
subbases A B A B
2 locking U-pieces 2 88 72 62 52
3 119 103 93 83
2 O-ring
2 4 150 134 124 114
Joinable subbase (catalogue number: 35300070) 5 181 165 155 145
1
2
2
Polarizer 6 212 196 186 176
2
2 1
Instant-fitting endpiece 7 243 227 217 207
Joinable end 8 274 258 248 238
subbases with
instant-fitting endpieces type weight (1) weight (2)
(catalogue number: 35300071 ) 01 0,120 type number of subbases
02 0,135 2 3 4 5 6 7 8
00076GB-2017/R01
04 0,185 03+01 0,295 0,430 0,565 0,700 0,835 0,970 1,105

06 0,105 03+06 0,265 0,385 0,505 0,625 0,745 0,865 0,985
(1)
including coil and connector. 05+01 0,400 0,600 0,800 1,000 1,200 1,400 1,600
(except M12 connection type 06) 05+06 0,370 0,555 0,740 0,925 1,110 1,295 1,480
(2)
Including seals, set screws and joining unit.

SOLENOID VALVES NC
2
3/2
Series
direct operated
pad mounting body
3 1
2
109
M5 subbases NO
3 1
FEATURES
• Compact size and light weight simplify assembly on single or joinable subbases
• AC/DC interchangeability of the solenoid without disassembly of the valve
• Manual operator allows an easy installation
GENERAL
NBR (nitrile)
air, inert gas, water, oil -10°C to +80°C
Body and subbases PPS
Core tube Brass
Seals NBR or FPM
Subbase seals FPM
Shading coil Copper 3
Connector specification DIN 43650, 11 mm, industry standard B (11 mm)
inrush holding hot/cold temperature type (1)
~ ~ = range (TS) ~ =
(VA) (VA) (W) (W) (C°) 230 V/50 Hz 24 V DC 1 2
6 3,5 2,5 2,5 / 3 -10 to +60 400127-097 400904-142 01
(1)
SPECIFICATIONS
flow operating pressure
orifice catalogue number
size max. (PS) with maintained manual operator
size Kv (W)
1➙2 2➙3 1➙2 2➙3 min. air () water/oil() NBR FPM
(mm) (mm) (m3/h) (l/min) (m3/h) (l/min) ~ = ~ = ~ = ~/= ~/=
1 1,2 0,03 0,5 0,06 1 0 15 15 15 15 2,5 3 10900001 10900004
pad
1,5 1,2 0,06 1 0,06 1 0 8 8 8 8 2,5 3 10900040 10900043

mounting
2,5 1,2 0,10 1,8 0,06 1 0 3 3 3 3 2,5 3 10900003 10900006
NO - Normally open
(2)
1,5 1,2 0,03 0,5 0,04 0,6 0 8 4 8 4 2,5 3 10900017 10900029
SUBBASES (3)
pipe mounting catalogue

designation composition
size type number
6/6 polyamide subbases
Individual Single subbase + two ends. 36100009
mounting Pressure to right, G 1/8 M5 G 1/8
1 joinable subbase 36100004

M5
subbases Assembly
of Set of 2 joinable subbases
2 to 10 with ends. G 1/8 G 1/8 36100005
G 1/8 Pressure to right, G 1/8
ends joinable M5 M5
subbases
(4) Set of 2 joinable subbases
with ends. G 1/8 G 1/8 36100032 (5)
Pressure to right and/or left, G 1/8 M5 M5
00160GB-2017/R01
(2)
In NO function: pressure supply connected to the top of the solenoid valve Ø M5
(3)
These subbases can be mounted on symmetrical rail to EN 50022, AFNOR NF C 63015, using 2 clips (clips: catalogue number 33400036, pack of 10).
(4)
Maximum number of solenoid valves which can operate simultaneously on joinable subbases: Ø 1 mm: 10, Ø 1,5 mm: 5, Ø 2,5 mm: 3.
(5)
Used for two different pressures, delivered with 1 plug to be put in the right place.

OPTIONS
• Compliance with “UL”, “CSA” standards are available
• Oxygen service, used option catalogue number: 970517
• Exhaust port regulator M5 adaptable on port 3, catalogue number: 34600380
INSTALLATION
• Mounting on single or joinable subbases
• ATEX 2014/34/EU versions can be installed on single subbases (all versions) or joinable zamak subbases (option “PV”)
• Pipe connections 1/8 have standard thread according to ISO 228/1
ORDERING EXAMPLES:
10900001 230V / 50 Hz
10900004 24V / DC
voltage
catalogue number options

TYPE 01 JOINABLE SUBBASE G 1/8
Prefix “SC” Solenoid PPS
Epoxy moulded
IEC 335 / DIN 43650 / IP65
weight : 0,100
10900001/03/04/06/17/29/40/43 36100005/36100032
66
11 51 22
= =
M5
2-2
180°
87
360°
67
70
50
55
1
1 2 2 2 1
16
13
= =
20
2 G 1/8
20 F 33 3 Ø M5
7
23

2 2 M3 x 20 screws
2 dia. 4,5 mm holes
3 Clips
67
2 locking U-pieces
27
6
SUBBASE MOUNTING PATTERN
8 B 8
A
-2
2
2 3 O-ring
2
Joinable subbase (catalogue number: 36100004 )

1 2
2 2
Polarizer
Manual 1
operator side Outline of 2

Tapped endpiece
solenoid valve
Two dia. 2,7 mm holes
2 Joinable subbases with tapped endpieces
14
(catalogue number: 36100005 )

9
14 Two M3 holes, number of

min. depth 8 mm A B weight (1)
subbases
2 72 56 0,300
3 95 79 0,420
4 118 102 0,540
5 141 125 0,660
00160GB-2017/R01
6 164 148 0,780

+1 +23 +23 +0,120
(1)
including coils, connectors and joinable
endpieces.

SOLENOID VALVES 3/2
Series
direct operated 2
multiple manifold sub-bases NC 356

3 1
1/8
FEATURES
• Very small size and easy assembly
• AC/DC interchangeability of the solenoid without disassembling the valve
• Quick disassembly of core tube for easy maintenance of internal parts
• Standard disc seal made of FPM suitable for a wide range of operating tempera-
tures and compatible with many fluids
• Compliance with UL and CSA standards
GENERAL
air, inert gas, water, oil - 10°C to + 100°C FPM (fluoroelastomer)
MATERIALS IN CONTACT WITH FLUID UL

Manifold body Brass
Springs Stainless steel
Seat Brass 3
Seals FPM
Disc FPM
Shading coil Copper
Connector specification DIN 43650, 11 mm, industry standard B (11 mm)
Standard voltages (2) DC (=) : 24V - 48V
(Other voltages and 60 Hz on request) AC (~) : 24V - 48V - 115V - 230V / 50 Hz 2
power ratings operator 1
(VA) (VA) (W) (W) (C°) 230 V/50 Hz 24 V DC
SC 12 6 4 5 / 6,9 -10 to + 60 400127-197 400127-142 01
(1)
Duty cycle: 50% (30 min)
(2)
SPECIFICATIONS
differential (bar)
flow
Number of valves
pipe orifice power coil catalogue

coefficient max. (PS)
size size (W) number
Kv
min. air, water () oil ()
EPDM
G (mm) (m3/h) (l/min) ~ = ~ = ~ = ~/=

2 SCG356B819V E - -
3 SCG356B820V E - -
4 SCG356B821V E - -
5 SCG356B822V E - -
1,6 0,08 1,33 0 10 10 10 10 4 6,9 6 SCG356B823V E - -
7 SCG356B824V E - -
8 SCG356B825V E - -
9 SCG356B826V E - -
10 SCG356B827V E - -
1/8 (3)
2 SCG356B855V E - -
3 SCG356B856V E - -
4 SCG356B857V E - -
5 SCG356B858V E - -
2,4 0,13 2,16 0 4 4 4 4 4 6,9 6 SCG356B859V E - -
7 SCG356B860V E - -
8 SCG356B861V E - -
9 SCG356B862V E - -
00072GB-2017/R01
10 SCG356B863V E - -
Pipe size port 3: M5
(3)

OPTIONS
• Valves can also be supplied with EPDM (ethylene-propylene) seals and discs. Use the appropriate optional suffix letter for
identification
• Flying leads coil, use prefix L (e.g.: LG356B822V)
• Oxygen service with seals and disc in FPM, suffix NV, example: SCG356B858NV
• NC, orifice sizes 1,2 mm and 2 mm
• U, orifice sizes 1,6 - 2 - 2,4 mm ; NO, orifice size 1,6 mm
• Stainless steel manifold bodies, NC, U and NO, on request
INSTALLATION
• Multiple manifold solenoid valves have 2 mounting holes in body
spare parts kit no. SC G 356 B 821 V 230V / 50 Hz
catalogue number
~ = SC G 356 B 826 E 115V / 50 Hz
all C140264V C140264V SC G 356 B 857 NV 24V / DC
(1) SC G 356 B 863 V 230V / 50 Hz
prefix
pipe thread voltage
basic number suffix

C140264 V(1)
C140264 E
basic number suffix

TYPE 01
Epoxy moulded
Integrated in manifold
IEC 335 / DIN 43650, IP65
18 = X - 36 18
63 5
27,5 Availability, design and specifications are subject to change without notice. All rights reserved.
2 x Ø M4
16,5 22
3 ...
3 M5
1/8
75
61,4
M5
2 2 2 2 2 2 2 2 2 2 2
27
14
1 8 8
1 1
12,5 4,5 24 11
25 X = [(n -1) x 24] + 22
weight (2)
00072GB--2017/R01
prefix
type number of solenoid valves (n)
option
2 3 4 5 6 7 8 9 10
01 SC 0,321 0,426 0,531 0,636 0,741 0,846 0,951 1,056 1,161
Incl. coil(s) and connector(s)
(2)

SOLENOID VALVES 2
3/2
Series
direct operated
pad mounting body NC
3 1
2
374
for subbase 1/4 or 1/2 3 1
FEATURES
• Pad-mount version for valve piloting applications
• Incorporation in borers for machine tool manufacturers
• Suitable for dosing/filling applications and industrial washing machines
• Compact solenoid valve for easy installation
• Epoxy moulded coil for general service applications
• Three manual operator versions
GENERAL
air, inert gas, water, oil - 25°C to + 80°C NBR (nitrile)
3
Body Brass
Internal parts, spring Stainless steel
Seat Brass
Seals NBR
Core guide POM
Shading coil Copper
2
Electrical safety IEC 335 1
(VA) (VA) (W) (W) (C°) 230 V/50 Hz 24 V DC
SC 55 23 10,5 9/11,2 -40 to + 60 400425-117 400425-142 01
(1)
SPECIFICATIONS
flow operating pressure options
differential (bar) catalogue
pipe orifice coefficient power coil
number
man. operator
Kv
man. operator

maintained
EPDM
1 2 2 3 min. air, water, oil (*)

impulse
FPM
(G*) (mm) (m3/h) (l/min) (m3/h) (l/min) ~ = ~ = ~ =

pad 2 0,22 1,8 0,15 2,5 0 16 16 10,5 11,2 SCS374A016 SCS374A016 MS MO V E
mounting 2,7 0,22 3,6 0,15 2,5 0 10 10 10,5 11,2 SCS374A017 SCS374A017 MS MO V E
00078GB-2017/R01

OPTIONS
• Valves can also be supplied with FPM (fluoroelastomer) and EPDM (ethylene-propylene) seals and discs. Use the appropriate
optional suffix letter for identification
• Waterproof enclosure with embedded screw terminal coil according to protection class IP67, CEE-10 (prefix WP)
• Class H coil (10,5W/11,2W coils), prefix HT
• Button type manual operator, use TPL 20655, example: SCXS374A017 TPL 20655 (All versions available)
• Oxygen service with seals and disc in FPM, suffix N, example:SCS374A016NV
• Brass subbases: Single (1/4), catalogue number 36101001 / Joinable (1/4), catalogue number 36101027
Aluminium subbases: Single (1/2), catalogue number 36101029
Supply rail (1/2), 2 to 6 (36101030 to 36101034), 8 (36101035), 10 (36101036)
INSTALLATION
• Mounting on single or joinable subbase or on supply rail, four mounting holes
• ATEX 2014/34/EU versions can be installed on single or joinable brass subbases
• Pipe connection G 1/8 has standard thread according to ISO 228/1
1/4 and 1/2 subbases pipe connections (G*) have standard combination thread according to ISO 228/1 and ISO 7/1
spare parts kit no. SC S 374 A 016 MO 24V / DC
catalogue number maintained SC S 374 A 016 MO 230V / 50 Hz
~ = manual operator
SCS374A016 / 017 C140160 C140160 C140048 prefix
pipe thread voltage
(1)
Standard suffixes E and V are also applicable to kits.
basic number suffix

C140160
DIMENSIONS (mm), WEIGHT (kg) C140160 V
TYPE 01 C140160 E
Epoxy moulded basic number suffix
IEC 335/ ISO 4400
IP65
41 41 85 (70) bottom view
64 (55) type prefix option weight
45 (30)
1/8
01 SC 0,527 (2)
02 single subbase 0,453
40,7
46
35
10
03 single subbase 0,228

95,2
80
35 Incl. coil(s) and connector(s)

(2)
45
27
16
weight
8,7
4 vis M5
E 86,5 (77,5)
E (mm) manual operator
number of valves
type
screw impulse button
2 3 4 5 6 7 8 9 10
04 1,487 2,251 3,015 3,779 4,543 5,307 - - -
21,5 34 30
05 0,379 0,530 0,681 0,832 0,983 - 1,285 - 1,587
TYPE 02 TYPE 04
Single brass View F Joinable brass
10,5
subbase subbases
17
25
70 36101027 (unit) 1
36101001 58 6 2 x Ø 5,5 2/2 way can 1/4 1/4
35
60
4 x M5 be combined Ø 5,2
1
2 2 2
F
6
with 3/2 way

7
11
=
1
70
56
35
3/2
3/2
3/2
3/2
33
45
2/2
2/2
2/2
2/2
17,5
1 2 x Ø5
= =
=
20
1
7
2/2
1/4 1/4 = =
45 35 11,5 5,5 A - 11 5,5
= = A = n x 60 (n=1...7)
TYPE 03 TYPE 05
Single aluminium Aluminium supply rails
subbase 36101030..1036
View F 2/2 way can
72
36101029 be combined A = 22 + (n x 50) (n = 2 ... 6, 8, 10) 5
6 60 6
4 x Ø 6,5 35 with 3/2 way 6 A - 12 6
00078GB-2017/R01
F 52
= =
2 1/4 2 1/4 2 1/4 2 1/4 2 1/4
= = 3/2
1/4
=
1
35 =
2/2
1/2
= =
= =
35
52
52
35
=
=
27,4
1
26,4
3/2
=
1 4 x Ø 6,5
9,8
2/2
=
Ø4
72 5 1/2
= =

SOLENOID VALVES 3/2
Series
for high and low temperature applications 2
ISO 15218 (CNOMO, size 30) interface NC 374

3 1
direct operated, pad mounting body
FEATURES
• High and low temperature solenoid pilot valve intended for single acting actuator
control
• Solenoid pilot valve with CNOMO size 30 interface (compatible with series 551-552-
553)
• AC/DC interchangeability of the solenoid operator without any need for disassembly
of the valve
• Epoxy moulded coil suitable for exterior applications
• Version with or without manual operator
GENERAL
Differential pressure 0 - 12 bar [1 bar = 100 kPa]
Pneumatic interface ISO 15218 (CNOMO E06.05.80, size 30)
air or inert gas - 25°C to + 60°C NBR (nitrile)
- 25°C to + 90°C FPM (fluoroelastomer) 3

Body Aluminium, black cataphoresis coating
Threaded nut Steel
Core tube, core, plugnut Stainless steel
Shading coil Copper
Seals NBR (+60°C) or FPM (+90°C)
2
Coil insulation class F (+60°C) or H (+90°C)
Connector Spade plug (cable Ø 6-10 mm) 1
(VA) (VA) (W) (W) (C°) 230 V/50 Hz 24 V DC
-25 to + 60 400425-117 400425-142
SC 55 23 10,5 9/11,2 01
-25 to + 90 400426-117 400426-142
Refer to the dimensional drawings on the following page..

(1)
SPECIFICATIONS
flow operating pressure catalogue
orifice differential (bar) number
pipe coefficient power coil
size
size Kv max. (PS) (W) with maintained manual
without manual operator
1 2 2 3 1 2 2 3 min. air () operator
(mm) (mm) (m3/h) (l/min) (m3/h) (l/min) ~ = ~ = ~/= ~/=
NC - Normally closed, NBR seals, low temperatures
pad mount 2 - 0,11 1,8 0,11 1,8 0 12 12 10,5 11,2 SCS374A090 SCS374A090MS
NC - Normally closed, FPM seals, high and low temperatures
pad mount 2 - 0,11 1,8 0,11 1,8 0 12 12 10,5 11,2 SCHTS374A090V SCHTS374A090VMS
50042GB-2017/R01

INSTALLATION
• Solenoid valves supplied with mounting pad screws
• Installation on valve or single, non-joinable subbase with ISO 15218 (CNOMO, size 30) interface
• Pipe connection G 1/8 has standard thread according to ISO 228/1
DIMENSIONS (mm), WEIGHT (kg) ORDERING EXAMPLES:

TYPE 01 SC S 374 A 090 24V / DC
Prefix “SC” Solenoid SCHT S 374 A 090 VMS 230V / 50 Hz
Epoxy moulded
IEC 335 / ISO 4400 prefix
IP65 pipe thread voltage
basic number suffix
41 41 86
45 64
3 G 1/8
41
360°
115
105,2
41
37
37
2
52
2
=
7,5
1
=
21 7 15
= = 1 30
= =
type weight (1) 1 Mounting: 2 screws M4 x 35

01 0,49 2 Manual operator location
(1)
50042GB-2017/R01

SPOOL VALVES 12 2 2
3/2
Séries
pilot operated or air operated, spool type
551
3 1 12 3 1
NF
single/dual solenoid or air (mono/bistable function)
553
12 2 10 2
aluminium body, 1/4 - 1/2 3 1

12 3 1 10
FEATURES
• All the exhaust ports of the spool valve are connectable, providing better environmental
protection. Particularly recommended for sensitive areas, such as clean rooms, and
applications in the pharmaceutical and food processing sectors
• The valves offer environmental protection against the ingress of liquids, dusts or
other foreign matter (environmentally-protected construction)
• The monostable spool valves in conformity with IEC 61508 Standard (2010 route 2H
version) have TÜV (551 series) and EXIDA (551-553 series) certified with integrity
levels: SIL 2 for HFT = 0 / SIL 3 for HFT = 1
GENERAL
Differential pressure 2 - 10,4 bar [1 bar = 100 kPa]
Flow (Qv at 6 bar) l/min (ANR)
1/4 1/2
860 3800
air, inert gas, filtered - 25°C to + 60°C NBR (nitrile) + PUR (polyurethane)

Body, end cover Aluminium, black anodized 2
End cover (spring return) Glass fibre filled PA
Spool valve internal parts Zamak, stainless steel, POM, aluminium
Seals NBR + PUR
Core tube Brass
Shading coil Copper 3 1
Connector Spade plug (cable Ø 6-8 mm or Ø 6-10 mm)
Connector specification EN 175301-803, 11 mm, industry standard form B (type 01)
or ISO 4400 / EN 175301-803, form A (type 02)
(VA) (VA) (W) (W) (C°) 230 V/50 Hz 24 V DC
SC 6 3,5 2,5 2,5 / 3 -25 to + 60 400127-097 400904-542 01
SC 15 7 5 4/5 -25 to + 60 400727-117 400727-185 02

(1)
SPECIFICATIONS Configurator - CAD Files

man. operator

Kv
maintained
min. air (*)

G (mm) (m3/h) (l/min) ~ = ~ = ~/=
NC - Normally closed, solenoid air pilot operated - spring return (monostable)
1/4 6 0,75 12,5 2 10 10 2,5 3 SCG551A005 MS - -
1/2 13 3,15 52,5 2 10 10 5 5 SCG553A005 MS - -
NC - Normally closed, solenoid air pilot operated and return (bistable)
1/4 6 0,75 12,5 2 10 10 2,5 3 SCG551A006 MS - -
1/2 13 3,15 52,5 2 10 10 5 5 SCG553A006 MS - -
NC - Solenoid air pilot operated - spring return (monostable), certified IEC 61508 Functional Safety data
1/4 6 0,75 12,5 2 10 10 2,5 3 SCG551A005SL - - -
1/2 13 3,15 52,5 2 10 10 5 5 SCG553A005SL - - -
00079GB-2018/R01

Pneumatic Valves (3/2) - 37
SERIES 551-553
AIR OPERATED AND OPTIONS
• Versions (Type 03): -p ilot air operated, spring return, catalogue numbers: G551A105 / G551A105SL (1/4);
G553A105 / G553A105SL (1/2)
- pilot air operated and return, catalogue numbers: G551A106 (1/4); G553A106 (1/2)
• Suffix “MF“ (air operated only, low temperature version, -40°C)
• Suffix “GD“ (air operated only, ATEX 2GD c)
• Supply rail (www.asco.com)
INSTALLATION
• The valves can be mounted in any position without affecting operation
• Do not connect the pressure supply to the exhaust port 3. The “environmentally-protected” construction is not adapted for a
“distributing” function or use in NO function. Contact us for functions available in specific versions
• It is necessary to connect pipes or fittings to the exhaust ports to protect the internal parts of the spool valve and its pneumatic
operator if used outside or in harsh environments (dusts, liquids etc.)
• IEC 61508 Functional Safety (suffix SL). Check temperature range of valve body and solenoid for suitability. For probability of
failure, contact us
• Valves with suffix “SL” are supplied with specific exhaust protectors
• Threaded pipe connection is standard: G = G (ISO 228/1)
ACCESSORIES ORDERING EXAMPLES:

exhaust SC G 551 A 005 MS 230V / 50 Hz
pipe
series protector SC G 551 A 005 SL 24V / DC
size
(stainless steel) SC G 553 A 006 115V / 50 Hz
551 G 1/4 34600419 (1) G 551 A 105 SL
553 G 1/2 34600479 (1)
551-553 M5 34600484 (1) prefix
(1)
Supplied with suffix “SL”. pipe thread voltage
basic number suffix

TYPE 01 TYPE 02 TYPE 03
Prefix “SC” Solenoid Prefix “SC” Solenoid No Prefix
Epoxy moulded Epoxy moulded Air operated version
IEC 335 / DIN 43650 IEC 335 / ISO 4400
IP65 IP65
551A005 / A005MS / A005SL / A006 / A006MS 553A005 / A005MS / A006 / A006MS 551A105 / A105SL / A106
=
27,5
=
3 2 1
=
3 x 1/4
40,2
27,5
= =
50,5 33
3 2 1 3 2 1
=
G1/8
3 x 1/4
114,2 16 3 x 1/2
=
83,5 33 2
=
45
32
B 12 10
23
3 1
=
2 90°
=
1
30
180°
0
59,2
52
A
95
9,5 12
=
75
=
2
72
360°
61
=
51
360°
32
45
3 1 112
=
=
=
M5
=
M5 133
A
0
3 1
9,5 12 1 12,1 19,5
93,5 110,6
145 170,2
13 233,3
198 13 21,8 21,8
553A105 / A105SL / A106
=
40,5
2 mounting holes: 3 2 1
=
A 5,3 mm dia. (Spotfacing: 9 mm dia., depth 5 mm) 78,5 16 3 x 1/2

B
2
B 6,5 mm dia. (Spotfacing: 11 mm dia., depth 6 mm) G1/4
=
=
prefix weight
72,3
51
type
option monostable bistable
=
=
01 (551) SC 0,35 (2) 0,43 (2)

3 1
02 (553) SC 0,69 (2) 0,99 (2) 12,1 19,4
74,6
03 (551) - 0,28 0,36
00079GB-2018/R01
134,5
03 (553) - 0,80 1,06 162
(2)

38 - Pneumatic Valves (3/2)
SOLENOID VALVES 12 2
3/2
Series
pilot operated, spool type
single/dual solenoid (mono/bistable function) NC
3 1
551
553
12 2 10
FEATURES
• Solenoid pilot valve with spade-plug connector type EN 175301-803, industry
standard form C, with 9,4 mm spacing. Versions with M12 connection
• Solenoid pilot valve, CNOMO size 15 interface, with or without integral LED and
electrical protection. LED indicator visible from 3 sides
GENERAL
1/4 1/2
860 3800
Pilot mounting interface surface ISO 15218 (CNOMO E06.36.120N, size 15)
3 1

Body, end cover Aluminium, black anodized
2
End cover (spring) Glass fibre filled PA
Pilot body PARA 551 (prefix CFSC)
Pilot internal parts POM, PET, stainless steel and brass
Pneumatic interface seal TPE
Connector (type 05) Spade plug (cable Ø 4-6 mm)
Connector specification Type 05: DIN 43650, 9,4 mm, form C
Connection Type 07: M12 (CNOMO E03.62.520.N) 3 1
Electrical enclosure protection Moulded IP65 [05] or IP67 [07] (EN 60529) 2
Standard voltages DC (=): 24V
(Other voltages and 60 Hz on request) AC (~) : 24V-115V-230V / 50 Hz (prefix CFSC)
553 (prefix CFSC)
ambient voltage
(VA) (VA) (W) (W) (C°) (V) (V)
1,4 1,2 1,1 1/1,2

CFSC -25 to + 60 24-115 24
1,8 (2) 1,6 (2) 1,5 (2) 1,15/1,35(2)
05
2,1 1,6 1,5 - -25 to + 60
230 -
2,5 (2) 2 (2) 1,9 (2) - -25 to + 50
CFVT (3) - - - 1,15/1,35 -25 to + 60 - 24 07
(1)
Supplied with LED indicator and
(3)
Values with LED indicator and protection, use TPL 20674.

(2)
protection.
SPECIFICATIONS Configurator - CAD Files

operating pressure catalogue number options
pipe orifice power coil connector
coefficient M12
man. operator
size size (W) EN 175301-803 (9,4 mm)

man. operator
max. (PS)
Kv
maintained
min. air (*) (type 05) (type 07)

impulse
G (mm) (m3/h) (l/min) ~ = ~ = ~/= =

1,1..1,5 1,2 CFSCG551C505 - MS MO -
1/4 6 0,75 12,5 2 10 10
- 1,35 - CFVTG551C505 MS MO -
1,1..1,5 1,2 CFSCG553A505 - MS MO -
1/2 13 3,15 52,5 2 10 10
- 1,35 - CFVTG553A505 MS MO -
00079GB-2018/R01
1,1..1,5 1,2 CFSCG551C506 - MS MO -

1/4 6 0,75 12,5 2 10 10
- 1,35 - CFVTG551C506 MS MO -
1,1..1,5 1,2 CFSCG553A506 - MS MO -
1/2 13 3,15 52,5 2 10 10
- 1,35 - CFVTG553A506 MS MO -

Pneumatic Valves (3/2) - 39
SERIES 551-553
SPECIFICATIONS
operating pressure catalogue number options
pipe orifice power coil connector
coefficient M12
man. operator
size size (W) EN 175301-803 (9,4 mm)
man. operator
max. (PS)
Kv
maintained
min. air (*) (type 05) (type 07)
impulse
G (mm) (m3/h) (l/min) ~ = ~ = ~/= =
1,1..1,5 1,2 CFSCG551C505SL - - MO -
1/4 6 0,75 12,5 2 10 10
- 1,35 - CFVTG551C505SL - MO -
1,1..1,5 1,2 CFSCG553A505SL - - MO -
1/2 13 3,15 52,5 2 10 10
- 1,35 - CFVTG553A505SL - MO -
OPTIONS
• LED and protection, prefix CFSC, use TPL number: TPL 20674 (e.g.: CFSCXG551C505TPL20674)
• Straight M12 connector: with 5 m cable length (catalogue number 88130212 )
• Supply rail (www.asco.com)
• Versions with spade-plug connector type ISO 15217/DIN 43650 form C with 8 mm spacing or with cable ends: contact us
INSTALLATION
• The valves can be mounted in any position without affecting operation
failure, contact us

exhaust CFSC G 551 C 505 230V / 50 Hz
pipe
series protector CFSC G 551 C 505 SL 115V / 50 Hz
size
(stainless steel) CFVT G 553 A 506 MS 24V / DC
551 G 1/4 34600419 (1) CFSC G 553 A 505 SLMO 230V / 50 Hz
553 G 1/2 34600479 (1)
551-553 M5 34600484 (1) prefix
(1)
Supplied with suffix “SL”. pipe thread voltage
basic number suffix
TYPE 05 TYPE 07
Prefix "CFSC" Prefix "CFVT"
Polyarilamide Polyarilamide
IEC 335 / IP65 IEC 335 / IP67
DIN 43650, 9,4 mm M12
553 553
551 551
1 1
79,2
99 33
90,2
A 89 33
3 1 A 3 1
40,2
40,2
59,8
1 3 1
74,6
= =
2
45
32
2 3 1
=
49,3
53,6
2 1
45
32
12,2 19,4 12,2 19,4

2 74,6
=
74,6
99,9 21,8
12,55 89,9 21,8 78,5 16
78,5 16 B B
12,55
3 1
2 2 3 1 2
=
=
3 x 1/4
72,3
160
27,5
2
51
72,3
51
150 3 x 1/4
27,5
229 3 1
3 1
=
=
209
134,5 3 x 1/2 134,5 3 x 1/2

162 162
weight (2) 1 Manual operator location

prefix
type monostable bistable 2 mounting holes:
option
00079GB-2018/R01
551 553 551 553 A 5,3 mm dia. (Spotfacing: 9 mm dia., depth 5 mm)
05 CFSC 0,33 1,03 0,46 2,08 B 6,5 mm dia. (Spotfacing: 11 mm dia., depth 6 mm)
07 CFVT 0,35 1,04 0,5 2,12
(2)
Prefix CFSC: including connector(s).

40 - Pneumatic Valves (3/2)
3/2
Series
single/dual solenoid (mono/bistable function) NC
3 1
551
553
12 2 10
FEATURES
• Can be externally piloted (external air pilot supply) to convert valve to zero minimum
operation by flipping a gasket
GENERAL
1/4 1/2
860 3800

Body Aluminium, black anodized
End cover (spring return) Glass fibre filled PA
Core, core tube and plugnut Stainless steel
Core spring Stainless steel
Top disc PA
Pilot seals FPM, NBR
Shading coil Copper
OTHERS MATERIALS
Solenoid enclosure Zinc plated steel (epoxy coated)
Coil connection Embedded screw terminal (cable ø 7 - 12 mm)
Cable entry Cable gland, polyamide (PA), M20x1,5

(VA) (VA) (W) (W) (C°) 230 V/50 Hz 24 V DC
WP 55 23 10,5 9/11,2 -40 to +75 400405-117 400405-142 01
Refer to the dimensional drawings on the following page
(1)
SPECIFICATIONS
man. operator

maintained
Kv min.
impulse /
(2) air (*)

G (mm) (m3/h) (l/min) ~ = ~ = ~/=
1/4 6 0,75 12,5 0/2 10 10 10,5 11,2 WPG551B405 MO - -
1/2 13 3,15 52,5 0/2 10 10 10,5 11,2 WPG553A405 MO - -
1/4 6 0,75 12,5 0/2 10 10 10,5 11,2 WPG551B406 MO - -
1/2 13 3,15 52,5 0/2 10 10 10,5 11,2 WPG553A406 MO - -
00182GB-2018/R01
1/4 6 0,75 12,5 0/2 10 10 10,5 11,2 WPG551B405SL - - -
1/2 13 3,15 52,5 0/2 10 10 10,5 11,2 WPG553A405SL - - -
(2)
Zero minimum is only achieved if external pressure is applied.

SERIES 551-553
OPTIONS
• Valves configured for external pilot air supply with ASCO solenoid interface, TPL 20547
• Coil insulation class H for max. ambient temperature +80°C, prefix “WPHT”
• 1/2” NPT (prefix “T”) and M20 x 1.5 (prefix “ET”) conduits (aluminium or 316 SS) available for steel solenoid enclosure
• Low temperature version (-40°C), use suffix “MF”
INSTALLATION
failure, contact us
• Solenoid enclosure has a cable gland with integral strain relief for cables with an O.D. from 7 to 12 mm and is provided with
internal and external grounding terminals

exhaust WP G 551 B 405 230V / 50 Hz
pipe
series protector WP G 551 B 405 SL 230V / 50 Hz
size
(stainless steel) WP G 553 A 406 MO 24V / DC
551-553 G 1/8 34600418 (1) WPHT G 551 B 406 MO 230V / 50 Hz
551 G 1/4 34600419 (1) WP G 553 A 406 MO 115V / 50 Hz
553 G 1/2 34600479 (1)
(1)
Supplied with suffix “SL”. prefix
pipe thread voltage
basic number suffix
Series 551 Series 553

2 mounting holes:
A 5,3 mm dia. (Spotfacing: 9 mm dia., depth 5 mm)
34,5
27,5
= =
= =
40,2
44
3 2 1 B 6,5 mm dia. (Spotfacing: 11 mm dia., depth 6 mm)

3 2 1
1/8 3 x 1/4 1/8 3 x 1/2
69,5 33
96,5 16
2 B
=
2
= =
32
45
3 1
=
=
=
72,3
51
21,5
9,5 12,1
=
A
=
80
131,5 3 1
21,5 12,2 19,4
171 92,6
152,5
198
TYPE 01
Prefix “WP” Solenoid
Metal; epoxy coated
IEC 335
IP67
1/8
1
103 (551)
112,5 (553)
360°
2 3 1
3
148 (551) / 169,2 (553) 38 82
204 (551) / 231,3 553) 120
weight (2) 1 Cable gland for unarmoured cable with 7 to 12 mm dia. sheath
00182GB-2018/R01
prefix
type monostable bistable 2 Manual operator location
option
551 553 551 553 3 External pilot air supply, 1/8 pipe size
01 WP 0,79 1,36 1,49 1,93
(2)
Including coil and cable gland.

3/2
Series
single/dual solenoid (mono/bistable function)
NC
12 2
3 1
10
551
brass body, 1/4 3 1
FEATURES
• Can be externally piloted (external air pilot supply) to convert valve to zero minimum
operation by flipping a gasket
version) have TÜV certified with integrity levels: SIL 2 for HFT = 0 / SIL 3 for HFT = 1
GENERAL
Flow (Qv at 6 bar) 860 l/min (ANR)
air, inert gas, filtered -40°C to +60°C VMQ (silicone) + PUR (polyurethane)

Body, end cover, seats Brass
Spool valve internal parts Brass, stainless steel, POM
Top disc PA
Pilot seals FPM, NBR
Prefix SC
Shading coil Copper
OTHERS MATERIALS
Solenoid enclosure (WP) Zinc plated steel (epoxy coated)
Connector (SC) Spade plug (cable Ø 6-10 mm)
Connector specification (SC) ISO 4400 / EN 175301-803, form A
Coil connection (WP) Embedded screw terminal (cable ø 7 - 12 mm)
Cable entry (WP) Cable gland, polyamide (PA), M20x1,5
Prefix WP
Electrical enclosure protection Moulded IP65 (SC) or IP67 (WP) (EN 60529)

(VA) (VA) (W) (W) (C°) 230 V/50 Hz 24 V DC
SC 55 23 10,5 9 / 11,2 -40 to +75 400425-117 400425-142 01
WP 55 23 10,5 9 / 11,2 -40 to +75 400405-117 400405-142 02
(1)
SPECIFICATIONS
man. operator
coefficient number
max. (PS) (W)
maintained
size size
Kv
impulse /
min.
(2) air (*) (type 01) (type 02)
G (mm) (m3/h) (l/min) ~ = ~ = ~/= ~/=
1/4 6 0,75 12,5 0/2 10 10 10,5 11,2 SCG551A407 WPG551A407 MO - -
1/4 6 0,75 12,5 0/2 10 10 10,5 11,2 SCG551A408 WPG551A408 MO - -
00080GB-2018/R01
1/4 6 0,75 12,5 0/2 10 10 10,5 11,2 SCG551A407SL WPG551A407SL - - -
(2)
Zero minimum is only achieved if external pressure is applied.

SERIES 551
OPTIONS
• Valves configured for external pilot air supply, use TPL 20547
• Coil insulation class H for max. ambient temperature +80°C, prefix HT (“SCHT” or “WPHT”)
• 1/2” NPT (prefix “T”) and M20 x 1.5 (prefix “ET”) conduits (aluminium or 316 SS) available for steel solenoid enclosure
INSTALLATION
failure, contact us
• Prefix “WP” execution: solenoid enclosure has a cable gland with integral strain relief for cables with an O.D. from 7 to 12 mm
and is provided with internal and external grounding terminals
exhaust SC G 551 A 407 230V / 50 Hz
pipe
series protector SC G 551 A 407 SL 230V / 50 Hz
size
(stainless steel) WP G 551 A 408 24V / 50 Hz
G 1/8 34600418 (1) WP G 551 A 407 MO 115V / 50 Hz
551
G 1/4 34600419 (1) WPHT G 551 A 408 MO 230V / 50 Hz
(1)
Supplied with suffix “SL”.
prefix
pipe thread voltage
basic number suffix

34,5
27,5
= =
3 2 1
1/8 3 x 1/4
69,5 33
=
2
= =
32
45
3 1
=
21,5
9,5 12,1
2 mounting holes: 5,3 mm dia. (Spotfacing: 9 mm dia., depth 5 mm)
80
131,5
171
TYPE 01 TYPE 02
Prefix “SC” Solenoid Prefix “WP” Solenoid
Epoxy moulded Metal; epoxy coated
IEC 335 / ISO 4400 IEC 335
IP65 IP67
G1/8
1
G1/8
360°
360°
103
103
90°
2 2
3 1 3 1
3 3
132 22,5 148 38 82
170 86,5 204 120
prefix weight (1) 1 Cable gland for unarmoured cable with 7 to 12 mm dia. sheath
type
00080GB-2018/R01
option monostable bistable 2 Manual operator location

01 SC 1,44 2,20 3 External pilot air supply, 1/8 pipe size
02 WP 1,62 2,28
(1)
Including coil(s), connector (SC) and cable gland (WP).

SUPPLY RAIL
Series
for mounting of
monostable/bistable spool valves
881
1/4 - 3/8 - 1/2
FEATURES
• Supply rail 1/4 (for valve series 551, L1), 3/8 (for valve series L2) and
1/2 (for valve series 553, L8)
• Easy, quick and cost-effective installation
• Orientable rail mounting for easy adaption to specific machine arrangement
• Available with up to 8 outlets
GENERAL
Max. inlet pressure 0 - 16 bar [1 bar = 100 kPa]
Differential pressure 0 - 10 bar
Ambient temperature -20°C to + 60°C
air, inert gas, filtered -20°C to + 60°C (1) NBR (nitrile)
(1)
-20°C to +90°C when using valves other than those of series 551/521/LI/L2/553/L8.

Supply rail Aluminium
Banjo bolts Brass nickel plated
O-rings NBR 1/4
1
OTHER MATERIALS 2
Mounting brackets Steel
3/8 -
1/2
1
1 Supply rail
2 Set of 2 mounting brackets
SPECIFICATIONS
operating pressure catalogue
differential (bar) number
number of outlets
flow (supply rail for «n» valves)

orifice
supply inlet size coefficient max. (PS)
size for valves
Kv air for valves for valves
min. G 1/4
inert gas () G 3/8 G 1/2
(series 521, 551, L1,
(series L2,...) (series 553, L8,...)
G (mm) (m3/h) (l/min) ~ = L2,...)

Supply rail with seals and banjo bolts, without mounting brackets
2 88100034 - -
3 88100035 - -
3/8 4 88100036 - -
7 1,2 20 0 10 10 5 88100037 - -
6 88100038 - -
(outlets 2..8 x 1/4)
7 88100039 - -
8 88100040 - -
2 - 88100800 88100759
3 - 88100801 88100760
3/4
12 (3/8) 2,7 (3/8) 45 (3/8) 4 - 88100802 88100761
0 10 10 5 - 88100803 88100762
(outlets 2..8 x 3/8 13 (1/2) 3 (1/2) 50 (1/2) 6 - 88100804 88100763
or 1/2)
7 - 88100805 88100764
8 - 88100806 88100765
Set of 2 mounting brackets
- - 88100049 88100773
00194GB-2017/R01

Pneumatic Valves (3/2 - 5/2 - 5/3) - 45
SUPPLY RAIL SERIES 881
OPTIONS
INSTALLATION
• The supply rails can be mounted in any position without affecting operation
• Installation/maintenance instructions are included with each supply rail

TYPE 01- 02
Supply rails
Aluminium
Type 01 = Inlet G 3/8, outlets G 1/4
Type 02 = Inlet G 3/4, outlets G 3/8 or G 1/2
180°
360°
3/8 G 3/8)
3/4
19 (3/8) 19
G4
27 (3/4)
G3
G2
H
G1
134 (3/4)
92 (3/8)
108 (3/4)
75 (3/8)
23 (3/8)
75
32 (3/4)
E
C 35 (3/8)
4 Ø 6,5 (3/8) 52 (3/4)
B 4 Ø 9 (3/4)
A 50 (3/8)
75 (3/4)
F1 F2 (1)
weight (2)
supply
type number of valves A B C D E 1/4 3/8 1/2
inlet size
(2)
2 108 92 55 78 42 0,125 - -
3 136 120 83 106 70 0,176 - -
4 164 148 111 134 98 0,225 - - (1) Supply rail
01 3/8 5 192 176 139 162 126 0,276 - - (2) Set of 2 mounting brackets
6 220 204 167 190 154 0,326 - -
7 248 232 195 218 182 0,374 - - adaptable valves F1 F2 G1 G2 G3 G4 H
8 276 260 223 246 210 0,424 - -
2 136 116 81 117 - - 0,322 0,350 551 82 27 148 194 197 232 147
3 177 157 122 158 - - 0,454 0,497 521 68 26 - 166 - - -
4 218 198 163 199 - - 0,591 0,648 L1 78 22 78 160 - - -
02 3/4 5 259 239 204 240 - - 0,719 0,791 552 126 20 202 260 - - -
6 300 280 245 281 - - 0,844 0,930 L2 88 22 88 168 - - -
7 341 321 286 322 - - 0,990 1,091 553 126 20 202 260 - - -
8 382 362 327 363 - - 1,115 1,230 L8 111 22 111 256 - - -

(2)
Supply rail with banjo bolts and seals
Additional weight per set of 2 mounting brackets: G 3/8 outlets 1/4 = 0,186 , G 3/4 outlets 3/8 or 1/2 = 0,416
This mounting arrangement allows valves to be mounted in any of 4 positions.

00194GB-2017/R01

46 - Pneumatic Valves (3/2 - 5/2 - 5/3)
SUPPLY RAIL
Series
WITH PRESSURE ISOLATION VALVES 881
for mounting of monostable/bistable valves
1/4
FEATURES
• Supply rail allowing for easy installation of isolation valves during operation without
having to cut the general pressure supply
• Supply rail designed for a large variety of 1/4” valves (521, 551, L1, L2)
• Isolation valves, mounting brackets and hardware included for immediate
installation
• Large range of optional accessories to allow the rail to be adapted to different uses:
1/8” isolation valve, supply pressure isolation valve, shut-off valve etc.
GENERAL
Max. inlet pressure 0 - 16 bar [1 bar = 100 kPa]
Differential pressure 0 - 10 bar
Ambient temperature -20°C to +90°C
air, inert gas, filtered - 25°C to + 60°C NBR (nitrile)

Supply rail Aluminium
End pieces Stainless steel
Screw/isolation valve Stainless steel
O-rings NBR
OTHER MATERIALS
Low mounting brackets (65 mm) Stainless steel
SPECIFICATIONS
operating pressure
catalogue
differential (bar)
number of outlets
flow number
orifice
supply inlet size coefficient max. (PS)
size
Kv air (supply rail for «n» valves
min. with end pieces and low 65 mm
inert gas ()
mounting brackets)
G (mm) (m3/h) (l/min) ~ =
Supply rail with isolation valves, end pieces and low mounting brackets
2 88100915
3 88100916
4 88100917
5 88100918
1/2 6 88100919
6,8 1,1 18,3 0 10 10 7 88100920
(outlets 2..12 x 1/4) 8 88100921
9 88100922
10 88100923
11 88100924
12 88100925
00194GB-2017/R01

Pneumatic Valves (3/2 - 5/2 - 5/3) - 47
FLUID ISOLATION SUPPLY RAIL SERIES 881
OPTIONS
• High mounting brackets (120 mm) for lateral and bottom mounting of bistable valves
• Isolation valve with G 1/8 thread for valve type L1
• Supply pressure isolation valve
• Shut-off valve 1/4
INSTALLATION
• The supply rails can be mounted in any position without affecting operation
• Installation/maintenance instructions are included with each supply rail

TYPE 01
Supply rails
Aluminium
Inlet G 1/2, outlets G 1/4
184
155
168
183
160
L2 L1 551 521
65
L1 L2 551 551 521

(3/2) (5/2)
13 11 11 13 60
27 33
46
40
40
17,5
140
10
2
74
90
94
89
1/4"
20 L1 L2 551 551 521 20
weight (2)
supply inlet
L type number of valves L 1/4
size
2 87 0,125
3 120 0,176
4 153 0,225
5 186 0,276
6 219 0,326
72
65
01 1/2 7 252 0,374

8 285 0,424
10
9 318 -
10 351 -
G 1/4
11 384 -
isolation valve 12 417 -

(2)
Supply rail with plugging screws, mounting brackets and seals.
This mounting arrangement allows valves to be mounted in any of several positions.

00194GB-2017/R01

48 - Pneumatic Valves (3/2 - 5/2 - 5/3)
SOLENOID VALVES NC
A
3/2
Series
pilot operated, high flow
floating diaphragms
E P
316
3/8 to 1 NO
FEATURES
• Brass bodied high flow valves with two floating diaphragms for larger single ac-
tuators
• The solenoid valves vent to 0 bar
• Direct lift pilot operators have a resilient soft seating to control the floating
diaphragms and to ensure absolute tight shut-off
• The solenoid valves satisfy all relevant EU Directives
GENERAL
air, inert gas, water - 20°C to + 80°C NBR (nitrile)

Body Brass
Seat Brass
Seat insert POM
Seals & discs NBR
Diaphragms NBR
Disc holder POM
Shading coil Copper
Coil insulation class F NC function
(VA) (VA) (W) (W) (C°) 230 V/50 Hz 24 V DC
34 15,6 6 7 / 9,7 -20 to + 75 400325-117 400325-142 01
SC 78 35 16,7 - -20 to + 50 400425-217 - 02 NO function
- - - 12/16,8 -20 to + 75 - 400625-142 03
(1)
SPECIFICATIONS

coefficient number
size size (W)
man. operator
max. (PS)
Kv
maintained
EPDM
min. air () water ()

PTFE
FPM
CR
NPT (mm) (m3/h) (l/min) ~ = ~ = ~ = ~/=

8,5 8,5 8,5 8,5 - - 6 9,7 SCB316A054 MO V E - -
3/8 16 2 33,3 0,7
17 17 17 17 - - 16,7 16,8 SCB316D014 MO V E - -
8,5 8,5 8,5 8,5 - - 6 9,7 SCB316A064 MO V E J -
1/2 16 2,8 46,6 0,7
17 17 17 17 - - 16,7 16,8 SCB316D024 MO V E - -
8,5 8,5 8,5 8,5 - - 6 9,7 SCB316B074 MO V E - -
3/4 18 4,2 70 0,7
17 17 17 17 - - 16,7 16,8 SCB316E044 MO V E J -
1 25 11,3 188,3 0,7 8,5 8,5 8,5 8,5 - - 6 9,7 SCB316E034 MO V E - -
NO - Normally open
8,5 8,5 8,5 8,5 - - 6 9,7 SCB316A056 MO V E - -
3/8 16 2 33,3 0,7
17 17 17 17 - - 16,7 16,8 SCB316D016 MO V E - -
8,5 8,5 8,5 8,5 - - 6 9,7 SCB316A066 MO V E - -
1/2 16 2,8 46,6 0,7
17 17 17 17 - - 16,7 16,8 SCB316D026 MO V E - -
00081GB-2017/R01
8,5 8,5 8,5 8,5 - - 6 9,7 SCB316B076 MO V E - -

3/4 18 4,2 70 0,7
17 17 17 17 - - 16,7 16,8 SCB316E046 MO V E - -
1 25 11,3 188,3 0,7 8,5 8,5 8,5 8,5 - - 6 9,7 SCB316E036 MO V E - -

OPTIONS
• Valves can also be supplied with FPM (fluoroelastomer), EPDM (ethylene-propylene), CR (chloroprene) and PTFE seals and
discs. Use the appropriate optional suffix letter for identification
• Electrical enclosures according to “NEMA” standards are available
• Mounting brackets for brass body valves, suffix MB
INSTALLATION
• Pipe connection identifier is B = NPT (ANSI 1.20.3)

spare parts kit no. mounting SC B 316 A 064 230V / 50 Hz
catalogue number
~ = bracket no. SC B 316 A 064 MO 115V / 50 Hz
SCB316A054/A064/B074 C314491 C314540 038713-000 SC B 316 D 016 V 24V / DC
SCB316D014/D024/E044 C314495 C314550 038713-000 SC B 316 E 046 230V / 50 Hz
SCB316E034 C302661 C302681 - prefix
SCB316E036 C302671 C302691 - pipe thread voltage
SCB316A056/A066/B076 C314492 C314494 038713-000 basic number suffix
SCB316D016/D026/E046 C314496 C314551 038713-000
(1)
Standard prefixes/suffixes are also applicable to kits. ORDERING EXAMPLES KITS:
- Not available
C314491(1)
C314540 V
C314492 E
basic number suffix
TYPE 01-02-03 TYPE 01
IEC 335 / ISO 4400 IEC 335 / ISO 4400
IP65 IP65
TYPE 01: B316A054/A064/A056/A066 TYPE 01: B316B074/B076 SCB316E034/E036
TYPE 02/03: B316D014/D024/D016/D026 TYPE 02/03: B316E044/E046
A F A F
A F
B B
C B
C
C
360˚
360˚
360˚
J J
L J
L
K
K
KL
M
E M A
M
A P
E
D G D P D G
G
E H E H E H
73 17,5 51,5
97
17,5
21
Ø 7,1
42
42
66
21
Ø 7,1
42
123
prefix catalogue weight

type A B C D E F G H J K L M
option number (2)
SCB316A054/A056/B064/B066 75 45 27 69.5 110 39 35 70 100 130 140 85 1,6

01 SC SCB316B074/B076 75 45 27 48 84 39 31 86 110 152 169 107 4,4
SCB316E034/E036 75 45 27 90 136 39 41 113 116 168 185 123 3,4
00081GB-2017/R01
SCB316D014/D016/D024/D026 (~) 80 50 30 69.5 110 45 35 70 104 134 144 85 2,7

02 SC
SCB316E044/E046 (~) 80 50 30 48 84 45 31 86 114 156 173 107 4,4
SCB316D014/D016/D024/D026 (=) 86 56 33 69.5 110 50 35 70 111 141 151 84 2;6
03 SC
SCB316E044/E046 (=) 86 56 33 48 84 50 31 86 121 163 163 106 4,4
(2)


Catalog Solenoid Valves 3 2 Direct Pilot Operated Series 387 Asco en 4224552

Uploaded by

Copyright:

Available Formats

Catalog Solenoid Valves 3 2 Direct Pilot Operated Series 387 Asco en 4224552

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Catalog Solenoid Valves 3 2 Direct Pilot Operated Series 387 Asco en 4224552

Uploaded by

Copyright:

Available Formats

3/2 SOLENOID VALVES

DIRECT AND PILOT OPERATED

NC 0 7 0 +60 M5 / pad mount 065 1

Supply rail for series 551/553 881 45

(Potentially explosive atmospheres, see page: IV)

pipe connections body max. operating fluid power

min. operating pressure

NORMALLY CLOSED (NC)

All leaflets are available on: www.asco.com

min. operating pressure

NORMALLY OPEN (NO)

W y 0,8 0 27 - 28 - - 19 - 21 - - -20 +40 16,7 11,2

All leaflets are available on: www.asco.com

IV - Solenoid Valves (3/2)

SG (C25) IIIC T115°C Dc IP65X 3 D Ex tc

All leaflets are available on: www.asco.com

IIC Gb / IIIC Db IIP67 2 G Ex mb

threaded or pad-mount body NC 065

MATERIALS IN CONTACT WITH FLUID

External thread with pad-mount body.

All leaflets are available on: www.asco.com

prefix catalogue 1 2 electrical supply wires, length: 0,35 m.

type A B C D E F G H J weight (1)

All leaflets are available on: www.asco.com

2 1 3 1 brass stainless steel

All leaflets are available on: www.asco.com

DIMENSIONS (mm), WEIGHT (kg)

prefix pipe weight (1)

All leaflets are available on: www.asco.com

ELECTRICAL CHARACTERISTICS NC function (1/8)

temperature inrush holding hot/cold

All leaflets are available on: www.asco.com

SPECIFICATIONS 15-DIGIT PRODUCT CODE

() Vérifier la compatibilité du fluide avec les matériaux en contact.

All leaflets are available on: www.asco.com

Configurator - CAD Files

MV = S teel enclosure, M20 cable gland, IECEx/ATEX

Search prefix in asco.com to get detailed technical information.

All leaflets are available on: www.asco.com

SPARE PARTS KITS CODE ()

All leaflets are available on: www.asco.com

DIMENSIONS (mm), WEIGHT (kg) Configurator - CAD Files

1 2 mounting holes M5 dia., depth 6 mm.

All leaflets are available on: www.asco.com

operating pressure options

size size max. (PS) (W)

(mm) (m3/h) (l/min) ~ = ~ = ~ = ~ = ~/= ~/=

0,27 4,5 0 2 1,5 2 1,5 2 1,5 9 9,7 - SCB320-061 MS MO V E J T

All leaflets are available on: www.asco.com

SPARE PARTS KIT & ACCESSORIES ORDERING EXAMPLES:

SCB320-059 C302106 C302212 (2) ORDERING EXAMPLES KITS:

SCB320A180 C302140 C302226 160800

All leaflets are available on: www.asco.com

DIMENSIONS (mm), WEIGHT (kg)

360˚ 360˚ 360˚

All leaflets are available on: www.asco.com

MATERIALS IN CONTACT WITH FLUID

pipe coefficient differential (bar) power coil

size Kv max. (PS) (W)

2 1 2 1 /1 3 min. air () water/oil () brass stainless steel

MV = S teel enclosure, M20 cable gland, IECEx/ATEX