Scribd Logo
Upload

Welcome to Scribd!

  • 51 views

    Hammer Finish Powder Guide Formulations

    Uploaded by

    احمد عدنان قنطي
    The document provides formulations and processing guidelines for producing black-silver, black-gold, and black-copper powder coatings, as well as a white-silver powder coating. Each formulation lists the ingredients and their percentages. The processing section describes producing a white base powder by premixing, extruding, grinding, and sieving ingredients, then dry-blending the white base powder with an aluminum powder to create the white-silver powder coating.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Hammer Finish Powder Guide Formulations

    Uploaded by

    احمد عدنان قنطي
    51 views2 pages
    The document provides formulations and processing guidelines for producing black-silver, black-gold, and black-copper powder coatings, as well as a white-silver powder coating. Each formulation lists the ingredients and their percentages. The processing section describes producing a white base powder by premixing, extruding, grinding, and sieving ingredients, then dry-blending the white base powder with an aluminum powder to create the white-silver powder coating.

    Original Title

    Hammer Finish powder Guide Formulations

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides formulations and processing guidelines for producing black-silver, black-gold, and black-copper powder coatings, as well as a white-silver powder coating. Each formulation lists the ingredients and their percentages. The processing section describes producing a white base powder by premixing, extruding, grinding, and sieving ingredients, then dry-blending the white base powder with an aluminum powder to create the white-silver powder coating.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    51 views2 pages

    Hammer Finish Powder Guide Formulations

    Uploaded by

    احمد عدنان قنطي
    The document provides formulations and processing guidelines for producing black-silver, black-gold, and black-copper powder coatings, as well as a white-silver powder coating. Each formulation lists the ingredients and their percentages. The processing section describes producing a white base powder by premixing, extruding, grinding, and sieving ingredients, then dry-blending the white base powder with an aluminum powder to create the white-silver powder coating.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Guiding formulations

    black-silver black-gold black-copper

    Black/silver
    Razeen SR 5013 (www.jana-ksa.net ) 45,30%
    Crylcoat 1540-0 (www.cytec.com) 45,30%
    Ceraflour 961 (www.byk.com) 0,20%
    Ceraflour 967 (www.byk.com) 0,20%
    Carbon Black FW 200 (www.evonik.com) 1,00%
    Nanoguard ACP DCP (www.sensopolis.com) 2,00%
    Sensowhite 4 (www.sensopolis.com) 4,00%
    PowderSafe 1080-01 silver (www.eckart.net ) 2,00%

    Black/gold
    Razeen SR 5013 (www.jana-ksa.net) 44,80%
    Crylcoat 1540-0 (www.cytec.com) 44,80%
    Ceraflour 961 (www.byk.com) 0,20%
    Ceraflour 967 (www.byk.com) 0,20%
    Carbon Black FW 200 (www.evonik.com) 1,00%
    Nanoguard ACP DCP (www.sensopolis.com) 2,00%
    Sensowhite 4 (www.sensopolis.com) 4,00%
    PowderSafe 1785-01 Rich pale gold (www.eckart.net) 3,00%

    Black/copper
    Razeen SR 5013 (www.jana-ksa.net) 44,80%
    Crylcoat 1540-0 (www.cytec.com) 44,80%
    Ceraflour 961 (www.byk.com) 0,20%
    Ceraflour 967 (www.byk.com) 0,20%
    Carbon Black FW 200 (www.evonik.com) 1,00%
    Nanoguard ACP DCP (www.sensopolis.com) 2,00%
    Sensowhite 4 (www.sensopolis.com) 4,00%
    PowderSafe 1790-01 Copper (www.eckart.net) 3,00%
    Processing:
    Guiding formulations
    White-silver

    1. White Base Powder:


    Razeen SR 5013 (www.jana-ksa.net) 30,00%
    Crylcoat 1540-0 (www.cytec.com) 30,00%
    Nanoguard ACP DCP (www.sensopolis.com) 4,00%
    Sensowhite 4 (www.sensopolis.com) 11,20%
    Colortherm Yellow 10 (www.bayferrox.com) 0,05%
    TiO2 (Cristal 122) (www.cristalglobal.com) 24,35%
    Ceraflour 961 (www.byk.com) 0,20%
    Ceraflour 967 (www.byk.com) 0,20%

    Processing:
    Premix: 2 min approx. 1200 rpm
    Extrusion: Prism TSE 16, heating zone: 110°C, shaft speed: approx. 350rpm
    Grinding: Retsch ZM 100, 16000 rpm
    Sieving: 140µm

    2. Metallic Powder Coating


    White Base Powder (see above) 99,00%
    STANDART Aluminium Powder PC100 1,00%

    Processing: Dry-Blend e.g. in Drum Hoop Mixer

    The information and recommendations contained herein are based upon our data believed to be correct. However, since the condi tions of use
    are beyond our control, no guarantee or warranty of any kind expressed or implied is made with respect to the informat ion contained herein.
    Furthermore, nothing contained in this guide shall be interpreted as a recommendation for using the product in violation of a ny patents relating
    to the material and their uses.

    You might also like