Organic and Medicinal Chemistry

International Journal
ISSN 2474-7610

Review Article Organic & Medicinal Chem IJ

Volume 6 Issue 4 - May 2018
Copyright © All rights are reserved by Omprakash H Nautiyal
DOI: 10.19080/OMCIJ.2018.06.555692

Castor Oil and Its Derivatives’ With Market Growth,

Commercial Perspective: Review
Omprakash H Nautiyal*
Professor and consulting scientist, India
Submission: April 25, 2018; Published: May 11, 2018
*
Corresponding author: Omprakash H Nautiyal, Professor and consulting scientist, 102, Shubh Building, Shivalik II, TP13, Canal Road, Chhani
Jakat Naka, Vadodara 390024, Gujarat, India, Email:

Abstract
Within the chemical industry oleo-chemicals from Castor beans carry a strong and potential pattern. With some of the old important processes
and products are replaced by the new in its constant changes. Some products over the years in contrast that were decline have been revived in
accordance with the introduction of new technology and applications. New market demands have mounted heavy pressure on castor chemistry
and have responded with great vigor. BSS castor oil is used in wide variety of applications and is the starting material for many other derivatives
of castor oil. In pharmaceuticals and cosmetics it is used as an ingredient in formulations. It combines well with styrene and diisocyanates for film
forming as well varnish. It is substantially insoluble infusible polymer and is used as lubricant component of coatings for vitamin and mineral
tablets. It is also important ingredient for petroleum oil and de emulsification. Ricinoleic acid is also known as castor oil acid and belongs to a
family of the unsaturated fatty acid. The Principal Castor Reactions are as follows; pyrolysis, polyamide11, hydrogenation, dehydration, caustic
fusion, sebacic acid, undecylenic acid, heptaldehyde, sulfation/sulfonation, alkoxylation, oxidation/polymerization, esterification, dimerization,
quaternaries, and engineering resin (interpenetrating networks).

Keywords: Castor Oil; 12-hydroxy Stearic acid; Ricinoleic Acid; Reactions; HCO; DCO

Introduction capacitor as a sonar transducer fluid and as a dielectric material

for electrical condensers. Polyurethane casting resins, fluid for
Oleo-chemicals from Castor experience a meaningful pattern
automobiles, trucks and machinery are the other applications of
within the chemical industry. Its constant changes, with some
castor oil. It also serves as starting material for other derivatives
of the old important processes and products are replaced by
of castor oil.
the new. Some products over the years in contrast that were
decline have been revived in accordance with the Introduction 12-hydroxy Stearic acid is the mixed fatty acid recovered by
of new technology and applications. New market demands have hydrolysis of hydrogenated castor oil with high melting point. It
mounted heavy pressure on castor chemistry and have responded is brittle, waxy solid at ambient temperatures. Its deterioration
with great vigor. Among all the vegetable oils Castor oil is a most must be protected by storing away from heat. It is insoluble
unusual product being more versatile. The concentration of most in water and has very negligible solubility in many organic
oils is either one or two applications, such as for edible purposes solvents. 12-HSA is non toxic and non hazardous. 12-HSA is
(cotton seeds, soya, corn, peanut, rapeseed, canola, sunflower, utilized in the manufacture of lithium and calcium greases and
coconut and palm). According to economic factors many of acrylic polymers. In molding of plastics it finds application as
these are interchangeable. Some of these find other uses, such an internal lubricant. It also has applications in aqueous and non
as in coatings, inks lubricants, detergents and soaps. With a wide aqueous coatings for automotive, equipment, appliances and
diversity of commercial applications castor has considerably architecture. Wool is treated with it for its shrink resistance. It
more uses directly related to the unique hydroxyl fatty acid is also used as coating liners for the interior of metal food and
structure [1]. beverage containers. Aviator and synthetic rubber finds its
application as an internal lubricant as well as theology modifier
BSS castor oil is used in wide variety of applications and is
in inks. Specialty chemicals esters as ethoxylates and sulfates
the starting material for many other derivatives of castor oil.
also find the use of it beside from plasticizers, textiles, cosmetics
In pharmaceuticals and cosmetics it is used as an ingredient in
and metal working operations [1].
formulations. It combines well with styrene and diisocyanates
for film forming varnish. It is substantially insoluble infusible Ricinoleic Acid
polymer and is used as lubricant component of coatings for
Ricinoleic acid is also known as castor oil acid and belongs
vitamin and mineral tablets. It is also important ingredient
to a family of the unsaturated fatty acid. It is a viscous yellow
for petroleum oil and de emulsification. It also impregnates

Organic & Medicinal Chem IJ 6(4): OMCIJ.MS.ID.5556792 (2018) 001

 Organic and Medicinal Chemistry International Journal

liquid having melting point 5.5oC and boiling point 245oC. It is the larger, producing finished product by one manufacturer.
immiscible with water and miscible with most of the organic Numerous hydrogenaters, found worldwide. Their product
solvents. Hydrolysis of castor oil yields it. It has uses in textiles finds applications as an intermediate for several different end
finishing, in coating inks and in making soaps. Ricinoleic acid can products. Polyamide is arbitrarily placed first and the volume
be reacted with bases like caustic, ammonia, ethanolamines, to of the two is comparable. The Principal Castor Reactions are as
prepare soaps. These materials find its applications in cutting follows; Pyrolysis, Polyamide 11, Hydrogenation, Dehydration,
oils, industrial lubricants, emulsifiers and metal working Caustic Fusion, Sebacic Acid, Undecylenic Acid, Heptaldehyde,
compounds and impart lubricity, and rust proof characteristics. Sulfation/Sulfonation, Alkoxylation, Oxidation/Polymerization,
Ricinoleic acid is helping aid in making transparent bar soaps Esterification, Dimerization, Quaternaries and Engineering
and high solids liquid soaps. It also enables the homogenization Resins (Interpenetrating Networks) [2].
of phenolic and cresylic ingredients in industrial germicides,
Castor Oil and Derivatives in Liquid Carbon Dioxide
disinfectants, and heavy duty detergents. It is also an efficient
pigments and dye dispersants that finds uses in inks, coatings, Castor oil, Heptaldehyde and heptyl alcohol were included
plastics, cosmetics and so on. Its sodium and potassium soaps in a study of the mutual solubility of liquid carbon dioxide with
are emulsifiers and foam stabilizers. It finds very important use each of 261 other substances. The solubility of carbon dioxide in
in manufacturing poly glycerol poly ricinoleate (PGPR) a key each substance determined as such as was the solubility of each
ingredient in chocolates products. The sodium soap is useful as substance in carbon dioxide. 464 ternary systems were prepared
emulsifier, stabilizer, and de foam for emulsion polymerization with triangular graphs. Advanced research in physical properties
of resins such as PVC and PVAC. It is also used for the treatment of organic chemicals this project was to establish fundamental
of leather. It provides good wetting, flexibility and softening properties [3].
properties to leather [2]. Process Description for Castor Oil and Its Derivatives
Properties of Pigments and Dispersing Dyes Process Description for Hydrogenated Castor Oil [HCO]:
Castor oil and many of its derivatives such as esters, a) The raw material, bleached castor oil (BSS grade) is
hydrogenates and ethoxylates are well understood for their processed under vacuum condition at a temperature of
ability to wet surfaces acting as excellent carriers of pigments around 160oC in presence of nickel catalyst.
and dyes. Typical as colors for food stuffs, plastics, lipstick,
paints, lacquers, coatings, inks, sealants, adhesives and color b) No sooner does the raw material reaches its required
concentrates for plastics. temperature, the vacuum is stopped and hydrogen is fed,
while the stirrer is still operating.
Reactions
c) The hydrogen feed is closed as the required degree
As per current commercial practice many castor reactions are
of hydrogenation is achieved and after this, hydrogenated
utilized as described follow. However there are certain limiting
product is started cooling.
factors that must be recognized. An important illustration is the
formation of estolides resulting from a linkage between hydroxyl d) As the product temperate reaches around 100°C, the
and carboxyl groups. On storage the hydroxyl in ricinoleic acid final product gets filtered, cooled and then conveyed to
forms an ester with the carboxyl. Decline of both hydroxyl value flaking unit for flaking and bagged.
and acid value goes down as reaction proceeds. The change is well
Process Description for Dehydrated Castor Oil (DCO):
known with commercial ricinoleic acid and the two values can
The reaction vessel is fed with castor oil stock grade through de-
change by 5%-10% within 90 days from original production. The
aerator vessel. The oil gets dried in this vessel and completely
subject of castor estolides is reviewed by Modak and Kane which
freed from air, a higher temperature and vacuum is maintained
has an important list of references. There are citations where
in the reaction vessel which, continuously re-circulate the oil
theoretically sound reaction mechanisms cannot be undertaken
in the presence of a catalyst. The castor oil dehydrated which
because of this interference. The ricinoleic acid structure
increases the un-saturation level and brings down the hydroxyl
explains why it could not be refined or purified by distillation by
content of castor oil. The uniform quality of the product by all
the conventional commercial procedure for purifying other fatty
this process is maintained. The oil is finally passed through heat
acids. Distillation affects the hydroxyl-acid linkage produces an
exchangers for cooling and then catalyst filtration as soon as the
alteration as the product is no longer ricinoleic acid. Factually,
required degree of un-saturation and dehydration is met. After
the estolide formation becomes one stage in the conversion to
the filtration, the product is charged to a decolorizing vessel for
dehydrated castor fatty acids, the process for which is explained
removing the excess color from the oil [3].
in this section [2].
Process Description for 12-Hydroxy Stearic Acid (12-
In accordance of actual castor tonnage consumption the
HSA): The hydrogenated castor oil recovered from HCO plant
reactions are presented in order. The comparison of hydrogenated
under set parameters and is converted to soap by mixing it with
castor with polyamide 11 is difficult to compare. The latter is

How to cite this article: Omprakash H N. Castor Oil and Its Derivatives’ With Market Growth, Commercial Perspective: Review. Organic & Medicinal
002
Chem IJ. 2018; 6(4): 555692. DOI: 10.19080/OMCIJ.2018.06.555692
 Organic and Medicinal Chemistry International Journal

caustic lye and acidulation vessel is conveyed with the converted contrast between current test procedures and those used over
HCO soap, in which it is mixed with dilute sulphuric acid which 60 years ago.
converts the soaps into fatty acids. 8% - 10% of glycerine is left
Castor oil has held relatively high purity, (high for a naturally
out in the acid water which is then drained out and stored for
occurring material). Therefore, it could be subjected efficiently
the recovery of glycerine. 12–hydroxy Stearic acid the acidulated
to a number of chemical processes to yield high purity chemical
product is fed into drier, from the acidulation vessel, wherein, it
derivatives. The chemical bases for such reactions are the
gets completely dried up through controlled heating. Pre dried
three points of functionality existing in ricinoleic acid: (a) The
12–HSA further cooled and taken to flaking unit for flaking [3].
carboxyl or ester group (b) The single point of un-saturation (c)
Process Description for Castor Oil Polyols Plant: From The hydroxyl group castor oil Chemistry [3].
the storage tank refined castor oil is taken and pumped into
This functionality may be utilized as follows:
premixing vessel. The catalysts is added and mixed properly in
the pre mixing vessel and mixed well through an attached auto A. At the carboxyl position, through a wide range of
feeding system. The material is then flow to the preheating esterifications.
vessel through which it is pumped into high pressure reactor.
B. The hydroxyl group can be acetylated or alkoxyllated.
The propylene oxide is taken in to the reactor through pressure
reducing valve at a pressure of about 0.6 MPa. Refined castor oil C. The un-saturation can be altered by hydrogenation or
is mixed with propylene oxide circulating continuously through epoxidation.
cooling heat exchanger with a pump. Effective heat and mass
D. The hydroxyl group can be removed by dehydration to
transfer resulted due to continuous circulation to produce
increase the un-saturation of the compound thus yielding
qualitative product. After the materials have undergone aging it
drying/polymerizing oil.
is then pumped to the reactor vessel. Employing dosing pump the
acid is then fed into the acid dosing tank and finally fed into the E. The hydroxyl position is highly reactive and the
reaction vessel. The material gets neutralized in the reactor and molecule can be split at that point by high temperature called
then pumped to the leaf filters to recover solid materials. Finally pyrolysis and by caustic fusion yielding four useful products
a clear liquid is recovered which is stored in a separate storage of shorter chain length.
tank. From the storage tank the crude Polyols is taken and fed Castor oil does have an interesting practical thesis on
into the reaction vessel along with the solvent feed. Before it
properties and utilization was presented in a review in 1952. Due
is sent to the drying unit all the materials are well mixed. Post to technical changes much of the subject matter is now outdated
removal of residual impurities, volatiles and purified Polyols,
since then. It is recommended however for the clear, concise and
they are stored in a separate storage tank. Vacuum drying unit
practical description of basic properties and characteristics of
produce overhead volatile matters are then condensed and
castor oil and its derivatives. The chemistry of castor oil with
collected in separate storage tanks. The solvent distillation
this approach refers to good quality oil and frequently identified
reactor is pumped with the volatile matter from which solvent is
as “No.1” castor oil with an expression accepted by the major
recovered and recycled in the process [3].
operators in each producing country. No.1 castor oil being an
Castor Oil is Non Toxic international standard represents quality that is generally usable
for the reactions and applications described in this review. An oil
It is well established from the extensive historical usage
of better quality is required in certain instances [3,4].
of castor oil for human consumption and topical application
which is safe. As an investigation studies by the US Department Castor Oil’s Stability to Oxygen
of Health and Human Services (NIH) established as a measure
Castor oil and many of its derivatives are stabilized by the
of safety for castor oil usage. In 1990 the feed studies on rats
hydroxyl group, which is beta to the double bond. This hydroxyl
or mice concluded no adverse side effects of castor oil. Dietary group protects the double bond by preventing the formation
concentrations as high as 10% in 90 days studies, did not affect of hyperperoxides sterically and inductively preventing the
survival or body weight gains. formation of peroxides, the intermediate chemical species
Castor Oil, Properties and Characteristics that form the oxidation of double bonds. Peroxide formation is
kinetics based and the method by which oxidative stability of a
Particularly alcohol solubility as castor oil characteristics was
vegetable oil is measured. Oxidative stability data are derived
reported in 1929. As matter of fact, examination also included
from an American Oil Chemists method and Active Oxygen
of bulk oil in 1919 in addition with the comparison of the
Method (AOM). A sample of vegetable oil is heated to 97oC
characteristics of fresh oil against oil under ten months storage.
while air is bubbled through it. AOM number is the number of
In the same time the examinations also included refractive index,
hours the sample for each vegetable oil took to reach a peroxide
viscosity, acidity, Halphen number, acetyl value, specific gravity,
value of 70 meqs. Olive oil mentioned to be the nearest stable
Wijs iodine value and acetic acid solubility all of which have been
vegetable oil after castor oil as, like castor oil, it is predominately
listed. It is interesting to note from a historical standpoint, the

How to cite this article: Omprakash H N. Castor Oil and Its Derivatives’ With Market Growth, Commercial Perspective: Review. Organic & Medicinal
003
Chem IJ. 2018; 6(4): 555692. DOI: 10.19080/OMCIJ.2018.06.555692
 Organic and Medicinal Chemistry International Journal

mono-unsaturated but is unlike soy and sunflower oils that

are polyunsaturated. Olive oil however lacks a stabilizing
factor like castor oil’s hydroxyl group. Conclusively castor oil is
approximately four times more stable than olive oil [3,4].

Product Applications
The basic derivatives, Heptaldehyde and Undecylenic acid
are used to manufacture various perfumery compounds (Table
1), which in turn are used to manufacture perfumes and synthetic
flavors.
Source: FAO Statics.
Table 1: Castor oil products applications.
Figure 1: Global Demand of Flavor and Fragrances in 2008.
End Use of
Perfumery Perfumery
Sr. No. Perfumery
Chemicals Compounds Prepared Flavors and fragrance as global demand is estimated to
Compound
increase at a growth rate of around 4% per annum. The demand
α-amyl cinnamic In soap
1 Heptaldehyde for flavors and fragrances moreover in the Asia/Pacific region
aldehyde perfumery
Coconut is estimated to be growing at a rate of about 7% per annum
Nonylenic acid esters
Aldehyde through 2008. Growth in the world’s most developed markets
to make 8-n-amyl
for flavor of will continue to be moderate, restrained by market maturity,
butyrolactone
coconut milk
consolidation in flavors and fragrances using industries and
Heptanoic acid Violet perfume strong downward pressure on prices. Flavor and fragrance is
Methyl-n-heptyl ketone Oil of Rue looking for products from natural sources and prefer to use raw
and ester of 3-nonic used in violet
materials which are harmless and bio-degradable. In the light
acid perfume
of this fact, there is good scope for castor oil derivatives in the
Heptaldehyde Jasmine flavor
global market. Demand for fragrance blends and essential oils
Undecylenic γ-undecalactone will benefit from increased interest in natural and exotic aromas,
2 Peach odor
Acid (Aldehyde C-14)
which are more expensive than their synthetic counterparts
Nonylic acid, nonylic Rose and
[3,4] (Table 2).
alcohol, nonylic Orange oil
Aldehyde constitutes Table 2: Statics Data Source: Department of Commerce (GOI).
Floral odor Export Import
Undecylenic alcohol Sr.
with fatty note Products Years Quantity Quantity
No.
Spicy Orange (MT) (MT)
n-decyldehyde
like odor 1 Heptaldehyde
Odor of 2002-03 112 NA
Allyl esters of
quinches and
Undecylenic acid 2003-04 130.01 0.68
as modifier
2004-05 210.57 10.44
Market and Growth Drivers
2005-06 183.74 NA
Market: India commands the position of is one of the
2 Undecylenic Acid
leading manufacturers of Flavors and fragrances in the world.
2002-03 372.66 768.18
These all bring natural products, used in developing synthetic
flavors and fragrances from castor oil derivatives, India is lagging 2003-04 385.02 1042.98
behind. India, being a world leader in Castor seeds and Castor 2004-05 257.96 695.72
oil production and processing has edge over other countries 2005-06 365.91 NA
like Japan, France and Germany who are importing castor oil
Technology / Process
and manufacturing these perfumery chemicals for further
processing into perfumes and Synthetic flavors. Germany, Subjecting castor oil to pyrolysis or destructive distillation
France, Switzerland and Japan are internationally the leading at temperature of above 450°C under vacuum it under
producers of synthetic flavors and fragrances from many natural goes decomposition to yield mainly Undecylenic acid and
ingredients, including castor oil derivatives like Undecylenic Heptaldehyde, in almost equal quantities (28% approx). The
acid and Heptaldehyde. Definitely there is large international yields of both acid and Aldehyde, has been found to enhance in
market for perfumery chemicals and estimated market in India the presence of water vapor. The spongy mass post processing,
is approx. 5000 MT [3,4]. The Global Demand of Flavors and consisted principally of polymerized Undecylenic acid, which
Fragrances is set to increase (Figure 1). The figure below depicts can be used in recovering of some quantity of Undecylenic acid.
the region wise Demand Break up of Flavors and Fragrance Undecylenic acid esters are used as ingredients for perfumery
market, estimated for the year 2008. chemicals. Heptaldehyde is having characteristic Jasmine flavor

How to cite this article: Omprakash H N. Castor Oil and Its Derivatives’ With Market Growth, Commercial Perspective: Review. Organic & Medicinal
004
Chem IJ. 2018; 6(4): 555692. DOI: 10.19080/OMCIJ.2018.06.555692
 Organic and Medicinal Chemistry International Journal

in it and typically it is also known as Jasmine Aldehyde, and it Hydrogenated Castor oil (Flakes/Powder)
can be converted to Heptanoic acid and Heptanol which are
Hydrogen is added to Castor Oil in the presence of a nickel
used in manufacture of many perfumery compounds. Castor oil’s
catalyst and the oil, called hydrogenated Castor Oil (Figure 3),
ingredients’ specifications for proposed perfumery chemicals
which is transformed into a hard, brittle wax with a melt point
are listed in the Table 3. Figure 2 explains the flow sheet of
of approximately 85-86 oC. This wax being extremely insoluble,
Heptaldehyde and Undecylenic acid produce [4,5].
therefore well suited for products requiring resistance to
Table 3: Specifications for Proposed Perfumery Chemicals. water, oils, petroleum and petroleum derivatives. HCO makes
Specification its availability as flakes or powder which melts to a clear
Sr. No. Heptaldehyde Undecylenic Acid
Details transparent liquid. It is being non-toxic and non-hazardous
Appearance Pungent smelling material. Hydrogenated castor oil is used in manufacturing of
1. Oily liquid
description oily liquid greases, it may also be used in paper coating for food packaging
Colorless to pale Water white to as well. The product is made to be available with several different
2. color
yellow pale yellow melting points, or in beaded or powdered form. Castor oil that is
Acid contents partially hydrogenated found uses in cosmetic formulations such
3. 5 90-95 % minimum
Max %
as lipsticks and stick deodorants. Hydrogenated Castor Oil finds
Aldehyde content an extensive diversified uses due to its unique combination of
4. 90-95 3-5 % maximum
Min %
physicochemical properties [5].
Refractive index
5. 1.415 1.4880
at 25oC
6. Freezing point oC NA 21-24

7. Acid value NA 295-304

8. Specific gravity 0.815 0.92
9. Boiling point oC 152-154 NA

Figure 3: HCO flakes/powder.

a) In the manufacture of multipurpose Lithium/Calcium

grease and high performance aviation grease

b) In the manufacture of soaps & cosmetics

c) As mould release agent in the processing of plastics and

rubbers

d) As a component of specialty wax blends like pencils,

crayons, lipsticks and anti-deodorant sticks

e) In the manufacture of hot-melt coatings and sealant

requiring resistance to water

f) As a coating agent for paper & as anti-foaming agent.

g) Automotive refinish Acrylics manufacture

h) Rheological agent that provides thixotropic in paints,

coatings, inks, adhesives, sealants and numerous industrial
compositions.

i) Thick film chlorinated rubber, epoxy and vinyl coating

Figure 2: Heptaldehyde and Undecylenic acid-Process flow
sheet. j) Flame Retardant and anti-static agent for fiber

How to cite this article: Omprakash H N. Castor Oil and Its Derivatives’ With Market Growth, Commercial Perspective: Review. Organic & Medicinal
005
Chem IJ. 2018; 6(4): 555692. DOI: 10.19080/OMCIJ.2018.06.555692
 Organic and Medicinal Chemistry International Journal

k) Manufacture of Spin finish oil for polyamide fiber q) Anti-tack and slip additives for processing plastics

l) In preparation of ointments, emulsified virus vaccines, r) In the manufacture of specialty chemicals for
sustained release capsules, wetting/bodying agent, face applications such as metal working, plasticizers and textile
paint auxiliaries in the form of derivatives such as esters, ethylates,
sulfates etc (Figure 3) [5-7].
m) As plasticizer for cellulosic
Poly Glycerol Poly Recinoleate (PGPR)
n) Processing aid for Color concentrates
Polyglycerol Polyricinoleate (PGPR) is a food grade emulsifier
o) Surface treatment agents
consisting of poly-glycerol as the hydrophilic group and
p) In the manufacture of hot melt adhesives used in interesterified ricinoleic fatty acids as the hydrophobic group
packaging books, binding footwear, carpet backing and in (Figure 4). The polyglycerol part of PGPR is mainly found as di-
product assembly tri- or tetra glycerol (min 75%) and max 10% of the polyglycerol
part will be found as hepta glycerol or higher.

Figure 4: HCO flakes/powder.

Properties: PGPR is a strong water-in-oil emulsifier used to a smaller amount of cyclic by-products will also be created.
manufacture stable pan release agents for the bakery industry In Figure 4 the formation of di- and tri-glycerol is shown, but
and to stabilize low fat margarine systems with high water highly polymerized polyglycerols are also created.
content. PGPR contributes in the ability to improve the flow
b) Secondly castor oil fatty acids will be heated in a reactor
properties in chocolate and vegetable fat coatings by lowering
likewise to temperatures above 200oC. The fatty acids from
the friction between the particles suspended in the liquid fat
castor oil are found as ricinoleic fatty acids (approx 90%)
phase and so-called “Yield Value” will be reduced and the liquid
and the rest fatty acids are found as oleic-, linoleic- Stearic-
chocolate mass will flow easily even at a low total fat content
fatty acids. Fatty acids of the ricinoleic react in a simple linear
[5-7].
esterifications process to form inter-esterified ricinoleic
Manufacture fatty acid chains. Water is released during the process and
removed over vacuum pump.
a) Firstly glycerol is heated to temperatures above 200oC
in a reactor. Small percent of alkali is added as catalyst. c) Thirdly the inter-esterified ricinoleic fatty acids are
Condensation of two or more glycerol molecules takes place mixed with the polyglycerol to form a complex mixture of
and water is released and removed over a vacuum pump. polyglycerol-polyricinoleate molecules of different chain
Chiefly straight-line polyglycerol units will be created with length [8-13] (Figure 5).

Figure 5: Poly glycerol are made from glycerol by alkaline condensation.

How to cite this article: Omprakash H N. Castor Oil and Its Derivatives’ With Market Growth, Commercial Perspective: Review. Organic & Medicinal
006
Chem IJ. 2018; 6(4): 555692. DOI: 10.19080/OMCIJ.2018.06.555692
 Organic and Medicinal Chemistry International Journal

Application in Foods oil to ricinoleic acid which is then cleaved to give capryl alcohol
(2-octanol) and sebacic acid [20-23].
PGPR has a dramatic impact on the flow properties of liquid
chocolate and compounds based on vegetable fats. Principally it Applications: One of the many uses of sebacic acid is in the
is understood that PGPR functions by lowering the yield value manufacture of Nylon 6-10. Sebacic acid and their derivatives
of the chocolate system, whereas the plastic viscosity hardly is like Azelaic acid finds variety of industrial uses in plasticizers,
influenced. In consideration of the practical implication that lubricants, hydraulic fluids, cosmetics, candles, etc. They are
PGPR always is added as a co-emulsifier in combination with used in the synthesis of polyamide and alkyd resins. An isomer,
lecithin or ammonium phosphatide and helps as emulsifiers isosebacic acid, has other applications in the manufacture of
mainly reduce the plastic viscosity [13-15]. Cocoa butter and extrusion plastics, adhesives, polyesters, polyurethane resins
specialty vegetable fats are quite expensive raw materials, so and synthetic rubber. Sebacic acid is also used as an intermediate
the manufactures of chocolate and compounds can benefit for aromatics, antiseptics and painting materials. Thousands
from the effect of PGPR and lower the total fat content in the of potential starting materials can be obtained from esters. It
ready to consume products. Also from a health point of view fat is used as a corrosion inhibitor in metalworking fluids and as
reduction in chocolate and compounds are improving the quality a complexion agent in greases. Sebacic acid when mixed with
in the eyes of the consumers. Due to the strong effect on the amines yields a very effective water soluble works as corrosion
yield value in chocolate it is possible to make the chocolate flow inhibitor for metal working fluids. Lithium hydroxyl stearate
during production by use of much less fat. Therefore PGPR is an complex greases often utilize dibasic acids such as sebacic acid
important tool in manufacturing of various types of chocolate- for the more unusual performance parameters. These greases
type products. The effect of PGPR as an ingredient of chocolate is are prepared from the esters of sebacic acid, and are being
further described by Steven T. Beckett, Schantz, B. and Rohm, H. developed for specific performance criteria under varying
conditions. Sebacic acid esters are used as plasticizers also for
Published toxicological studies, with scientific evaluation
vinyl resins and in the manufacture of dioctyl sebacate; a jet
enables the GRAS determination on polyglycerol poly ricinoleate
lubricant and lubricant in air cooled combustion motors [24-30]
combined with an evaluation of the consumption pattern of
(Table 4).
vegetable fat coatings in the US. JECFA has established an accepted
daily intake (AD1 value) for polyglycerol poly ricinoleate to 0-7.5 Table 4: Current demand supply estimates for the select grades of
castor oil (Santhanam et al. [6]).
mg/kg body weight per day. The statistical data on consumption
of vegetable fat coatings by the US population compared with the Current
Future
established AD1 value on polyglycerol poly ricinoleate clearly Product Demand Demand
Demand
Supply Gap
support the safety of the use of polyglycerol polyricinoleate at a
Hydrogenated
maximum rate of 0.3% in vegetable fat coatings [14-19].
Castor Oil Medium Medium Very high
(HCO)
Undecylenic Acid
12-Hydroxy
The pyrolysis of castor oil at 700oC under reduced pressure Stearic Acid Medium Medium very high
has been used to yield Heptaldehyde and Undecylenic acid. (It (12 HAS)
is the chemical decomposition of organic materials by heating Sulfated/
in the absence of oxygen or any other reagents, beside steam). Sulfonated
Medium Medium Medium-High
For producing alcohol from Heptaldehyde it can be further Castor oil
Turkey red
hydrogenate for use in the plasticizers. Hydrolysis is another
Dehydrated
method via the use of Methyl Undecylenate. Methyl Undecylenate Medium-High Medium Very high
Castor oil DCO
is hydrolyzed to give Undecylenic Acid [20-25].
Undecylenic
(CH CH (CH 2 )8 COOCH 3 ) Methyl Undecylenate=
Very High1 Very High1 Very High
2 → H 2O → Undecylenic Acid (CH 2 CH (CH 2 )8 COOH ) acid
Ricinoleic acid Medium Medium Low-Medium
Applications: Undecylenic acid has a long history as
Sebacic acid Very High2 Medium-High Low
antifungal drug. Many types of fungal infections can be treated
with its application. Undecylenic acid can be used as a surfactant Notations for Demand
in hair lotions and as biocide in soaps and deodorants. It goes as
a) 1, 2
Very High: 50,000 T and above per ear
a starting material for Nylon 11 [25-27].
b) High: 30,000 - 50,000 T per year
Sebacic Acid
c) Medium-High: 15,000-30,000 T per year
Sebacic acid, a 10-carbon di carboxylic acid, can be
synthesized from phenols and cresols, but castor oil oxidation d) Medium: 5,000-15,000 T per year
is considered a greener‖ process. Manufacture of sebacic acid is
e) Low-Medium: 1,000-5,000 T per year
done heating castor oil to high temperatures (about 250oC) with
the use of alkali. Result of this treatment saponifies the castor f) Low: Less than 1,000 T per year

How to cite this article: Omprakash H N. Castor Oil and Its Derivatives’ With Market Growth, Commercial Perspective: Review. Organic & Medicinal
007
Chem IJ. 2018; 6(4): 555692. DOI: 10.19080/OMCIJ.2018.06.555692
 Organic and Medicinal Chemistry International Journal

Notations for Demand-Supply Gap to 0.9026 while acid value of biodiesel product decreased with
increasing reaction time and saponification value decreased
a) Medium: There exists some demand over and above
with increasing reaction time and further increases [34-36].
supply, but there has not been a significant amount of
demand that has gone unmet Table 5: Composition of castor oil (Deshpande et al. [7]).

b) Medium-High: There have been some instances where Acid name Average Percentage Range

a significant demand has gone unmet Ricinoleic acid 85-95%

Oleic acid 6-2%
c) High: There have been many instances where a
Linoleic acid 5-1%
significant demand in the market has gone unmet
Linolenic acid 1-0.5%
d) Low: There have been very few instances when a
Stearic acid 1-0.5%
significant demand has gone unmet
Dihydroxystearic acid 0.5-0.3%
e) NA: denotes that information on demand supply gap is Others 0.5-0.2%
not available owing to the negligible demand volume
Table 6 presents their data of variation in viscosity with
Transesterification of Castor Oil time. The authors observed increase in specific gravity with
Deshpande DP have studied the Transesterification of castor increasing temperature, the same changes were observed in acid
oil in a batch reactor employing KOH as a catalyst. They have value. They also observed that at lower temperature of 30oC the
chosen the variables such as residence time, oil to methanol ratio, biodiesel product gave lower viscosity and they further increased
catalyst concentration and reaction time. Mohammed H. et al. in the temperature up to 50oC. Acid value had shown similar trend
their studies of transesterification of castor oil with methanolic as that of viscosity. Sap value too shown similar trend as that of
KOH, the authors varied operating conditions; KOH catalyst specific gravity (Table 7) [35-37].
concentration 2.1-3g for 250ml feedstock; temperature 30- Table 6: Variation of viscosity Verses time (Deshpande et al. [7]).
70oC; reaction time 30-360 minutes. The authors have reported
Time of
ester (biodiesel) content 48% which is highest and glycerine 30 45 60 90
Run (min)
52%. They carried the reaction with 65 ml methanol and 2.4
Kinematic
g KOH catalyst, reaction time of 360 minutes at a temperature viscosity 18.12 14.10 14.51 15.15
of 70oC and converting 250 ml castor oil feedstock. They also (cSt)
exercised parallel experiments involving two stage process viz Specific
0.9096 0.890 0.90 0.9026
esterification by acid followed by normal transesterification. gravity
Recommendation of this procedure was proposed by Marchetti. Acid value 1.26 0.57 0.64 0.68
Esterifications process comprised of two stages by Mohammed et Sap value 177.6 173.4 174.3 174.9
al reported the ester content up to 85%. The authors confirmed
Table 7: Viscosity variation with oil to alcohol ratio (Deshpande et al.
castor biodiesel viscosity of 13.75 mm2 sec-1 and density 0.9279 [7]).
at 150C. The castor oil used by the authors having viscosity of
Oil to
239.39 mm2 sec-1 [30-34]. Alcohol 1:6 1:9 1:10 1:12
Mole Ratio
The fatty acids consist of approximately 80–90% ricinoleic
Kinematic
acid, 3-6% linoleic acid, 2-4% oleic acid and 1-5% saturated fatty
viscosity 18.18 14.10 19.84 Nil
acids. The high content of ricinoleic acid is the reason for the (cSt)
versatile value of castor oil in technology (Table 5). In Comparison Specific
with other vegetable oils, castor oil has a very high proportion of 0.9036 0.8820 0.9112 Nil
gravity
simply unsaturated fatty acids (18:1). A high proportion of those Acid value 0.97 0.57 0.84 Nil
acids can be comparatively found only in the oil of the high oleic
Sap value 173.4 176.1 176.8 Nil
(HO) sunflower, appearing, however, as oleic acid. In castor oil
it is ricinoleic acid, the only unsaturated fatty acid occurring in According to their observation the specific gravity of
natural vegetable oils with a hydroxyl function of the carbon the product was lowest at 1wt % catalyst concentration
atom 12. The extraordinarily high viscosity of castor oil is and increased with increasing catalyst concentration up to
attributed to the presence of the hydroxyl group. The variation 2wt%. The specific gravity of product was increased at lowest
of specific gravity with residence time in their study appeared concentration at 0.5wt%. Specific gravity was higher due to
in a similar trend as that of viscosity. Decrease in the Specific probably of lower catalyst concentration of 0.5wt % conversions
gravity was observed from 0.9096 to 0.882 as residence time is were very low. Therefore with referring to above data, 1wt%
increased from 30 to 45 minutes, further increase in residence catalyst concentration may be optimum in the range of operating
time from 60 to 90 minutes the specific gravity increased 0.882 condition studied. The viscosity decreased with initially up to
1wt. % catalyst concentration and then increased up to 2wt% of

How to cite this article: Omprakash H N. Castor Oil and Its Derivatives’ With Market Growth, Commercial Perspective: Review. Organic & Medicinal
008
Chem IJ. 2018; 6(4): 555692. DOI: 10.19080/OMCIJ.2018.06.555692
 Organic and Medicinal Chemistry International Journal

catalyst concentration. Initially specific gravity decreased up to

1wt. % of catalyst concentration and further found to increased
and acid value shown similar trend as that of viscosity. Sap value
was found practically constant post 1wt% catalyst concentration.
The authors have supported their data with the plot of figures as
presented by Figures 6-11 [35,36].

Figure 9: Sap value vs. reaction time (Deshpande et al. [7]).

Figure 6: viscosity variation vs. time (Deshpande et al. [7]).

Figure 10: Viscosity variations vs. molar ratio (Deshpande et

al. [7]).

Figure 7: specific gravity vs. reaction time (Deshpande et al.

[7]).

Figure 11: molar ration vs. specific gravity (Deshpande et al.

[7]).

Conclusion
Global demand is estimated to increase at a growth rate of
around 4% of flavors and fragrance from castor oil per annum.
Figure 8: Acid value vs. reaction time (Deshpande et al. [7]). Much above the demand for flavors and fragrances in the Asia/

How to cite this article: Omprakash H N. Castor Oil and Its Derivatives’ With Market Growth, Commercial Perspective: Review. Organic & Medicinal
009
Chem IJ. 2018; 6(4): 555692. DOI: 10.19080/OMCIJ.2018.06.555692
 Organic and Medicinal Chemistry International Journal

Pacific region is estimated to be growing at a rate of about 7% 16. (2013) Aldrich Handbook of Fine Chemicals and Laboratory
per annum through 2008. Growth in the world’s most developed Equipment. Sigma Aldrich.

markets will continue to be moderate, restrained by market 17. Mutlu H, Meier MAR (2010) Castor oil as a renewable resource
maturity, consolidation in flavors and fragrances using industries for the chemical industry. European Journal of Lipid Science and
Technology 112(1): 10-30. 
and strong downward pressure on prices. Flavor and fragrance is
looking for products from natural sources and prefer to use raw 18. Mc Guire, Nancy (2004) Taming the Bean. The American Chemical
Society.
materials which are harmless and bio-degradable. In the light of
this fact, there is good scope for castor oil derivatives in the global 19. Brady George S, Clauser, Henry R, Vaccari John (1997) Materials
Handbook (14th Edn.); New York: McGraw Hill, USA. 
market. Fragrance blends and essential oils’ demand will benefit
from increased interest in natural and exotic aromas, which are 20. Older, Jules (2000) Back road and off road Biking. Mechanicsburg PA
Stack pole Books. p. 37. 
known to be more expensive than their synthetic counterparts.
21. Marter AD (1981) Castor: Markets, Utilization and Prospects. Tropical
References Product Institute, G152, p. 55-78.
1. Castor Oil Chemistry its Derivatives and Their Applications: Technical 22. Weise EA (1983) Oil seed crops. Tropical Agriculture Series p. 31-53.
Bulletin. International Castor Oil Association (ICOA).
23. Salunke DK, Desai BB (1941) Post harvest Biotechnology of Oil Seeds.
2. Mott Mac Donald Castor Oil Derivatives Perfumery Raw Materials p. CRC Press, USA, pp. 161-170.
1-7.
24. Dole KK, Keskar VR (1950) Dehydration of castor oil. Curr Sci 19(8):
3. Modak SN, Kane JG (1965) Studies in estolides I Kinetics of estolide 242-243.
formation and decomposition. J Am Oil Chem Soc 42: 428-432.
25. Nkpa NN, Arowolo TA, Akpan HJ (1989)  Quality of Nigerian palm oil
4. Beckett ST (2005) The Science of Chocolate. (Royal Society of after bleaching with local treated clays. Journal of the American Oil
Chemistry, 2000. p 81 ff) Lebensm Wiss u Technol 3(8): 41-45. Chemists Society 66(2): 218-222.
5. Schantz B, Rohm H (2005) The Science of Chocolate. (Royal Society of 26. Carr RA (1976)  Refining and degumming system for edible fats and
Chemistry 2000 p 81 ff) Lebensm Wiss u Technol 3(8): 41-45. oils. JAOCS 55: 766-770.
6. N Santhanam, M Balu, S Sreevatsan comprehensive castor oil report. 27. Janson H Castor oil production and processing. United Nations p. 4-13.
The definitive guide for entrepreneurs and investors.
28. Lew Kowitseh JI (1909) Chemical Technology and Analysis of oils.
7. Deshpande DP, Haral SS, Gandhi SS, Ganvir VN (2012) Transesterification
of Castor oil. ISCA J Engineering Sci 1(1): 2-7. 29. JC Chevalier Hoehn (1914) Process of hydrogenating unsaturated fatty
material.
8. Frank D, Gunstone, John L, Harwood Albert, J Dijkstra (2007) The Lipid
Handbook. CRC Press, USA, pp. 1472.  30. Proctor, Gamble (1918) Hydrogenation of fats and oil.
9. James AT, Hadaway HC, Webb JP (1965) The biosynthesis of ricinoleic 31. Dierig, David A (1995) Lesquerella. New Crop Factsheet. Center for
acid. Biochem J 95(2): 448-452.  New Crops & Plant Products. Purdue University, USA.
10. Zinc ricinoleate. Environmental Working Group. 32. Dierig, David A (2002) Lesquerella. The National Non-Food Crops
Centre.
11. Rider TH (1931) The purification of sodium ricinoleate. Journal of the
American Chemical Society 53: 4130-4133.  33. Wood M (2001) High Tech Castor Plants May Open Door to Domestic
Production. Agricultural Research Magazine 49(1).
12. Vieira C, Evangelista S, Cirillo R, Lippi A, Maggi CA, et al. (2000) Effect
of ricinoleic acid in acute and sub chronic experimental models of 34. Wilson R, Van Schie BJ, Howes D (1998) Overview of the preparation,
inflammation. Mediators Inflamm 9(5): 223-228. use and biological studies on polyglycerol polyricinoleate (PGPR). Food
Chem Toxicol 36(9-10): 711-718.  
13. (2008) L Oreal cosmetic composition comprising a continuous oily
phase. 35. BASF Technical data sheet on Cremophor EL.
14. Thomas, Alfred (2005) Fats and Fatty Oils. Ullmann’s Encyclopedia of 36. Busso C, Castro Prado MA (2004) Cremophor EL stimulates mitotic
Industrial Chemistry. Weinheim: Wiley VCH.  recombination in uvsH//uvsH diploid strain of Aspergillus nidulans. An
15. Cassel man, William Gordon (2014) Castor. Bill Cassel man’s Canadian Acad Bras Cienc 76(1): 49-55.
Word of the Day.

How to cite this article: Omprakash H N. Castor Oil and Its Derivatives’ With Market Growth, Commercial Perspective: Review. Organic & Medicinal
0010
Chem IJ. 2018; 6(4): 555692. DOI: 10.19080/OMCIJ.2018.06.555692
 Organic and Medicinal Chemistry International Journal

This work is licensed under Creative Your next submission with Juniper Publishers
Commons Attribution 4.0 License will reach you the below assets
DOI: 10.19080/OMCIJ.2018.06.555692
• Quality Editorial service
• Swift Peer Review
• Reprints availability
• E-prints Service
• Manuscript Podcast for convenient understanding
• Global attainment for your research
• Manuscript accessibility in different formats
( Pdf, E-pub, Full Text, Audio)
• Unceasing customer service

Track the below URL for one-step submission

https://juniperpublishers.com/online-submission.php

How to cite this article: Omprakash H N. Castor Oil and Its Derivatives’ With Market Growth, Commercial Perspective: Review. Organic & Medicinal
0011
Chem IJ. 2018; 6(4): 555692. DOI: 10.19080/OMCIJ.2018.06.555692