FortiSandbox 4.0.2 Administration Guide

Administration Guide
FortiSandbox 4.0.2
FORTINET DOCUMENT LIBRARY
https://docs.fortinet.com
FORTINET VIDEO GUIDE

https://video.fortinet.com
FORTINET BLOG
https://blog.fortinet.com
CUSTOMER SERVICE & SUPPORT

https://support.fortinet.com
FORTINET TRAINING & CERTIFICATION PROGRAM

https://www.fortinet.com/training-certification
NSE INSTITUTE
https://training.fortinet.com
FORTIGUARD CENTER
https://www.fortiguard.com
END USER LICENSE AGREEMENT

https://www.fortinet.com/doc/legal/EULA.pdf
FEEDBACK
Email: [email protected]
February 17, 2022

FortiSandbox 4.0.2 Administration Guide
34-402-750536-20220217
TABLE OF CONTENTS
Introduction 7
FortiSandbox overview 7
CLI overview 8
GUI overview 9
Connecting to the GUI 9
GUI interface 10
CLI Console 11
Default port information 12
Configuration checklist 14
Update the firmware 14
Change the system host name 15
Backup or restore the system configuration 15
Configure the system time 18
Change the administrator password 19
Change the GUI idle timeout 19
Microsoft Windows VM license activation 19
Microsoft Office license upload and activation 20
Refresh current web page 21
Toggle left-side menu style 21
Reboot and shut down the unit 21
Log out of the unit 22
Perform a basic test 22
Dashboard widgets 23
Customize the Dashboard 24
Show unprocessed detection alert notifications on Dashboard > Status 25
System Information 26
Licenses 27
Connectivity and Services 28
Scan Performance 28
System Resources 28
Scan Statistics 29
File Scan 30
Top Devices 30
Pending Job Statistics 30
Top Critical Logs 30
Sniffer Traffic Throughput 30
Customized Threats Distribution 30
Quick Download 30
System Resources Usage 31
Operation Center 31
Threats by Topology 33
Threats by Hosts 34
Threats by Hosts - level 1 34
FortiSandbox 4.0.2 Administration Guide 3

Fortinet Inc.
Threats by Files 37
Threats by Files - level 1 37
Threats by Devices 39
Threats by Devices - level 1 40
Security Fabric 43
Device 43
Supported Devices 45
Adapter 53
Configure MTA adapter 56
Configure Carbon Black/Bit9 Server 60
Configure ICAP adapter 62
Configure FortiMail to integrate with FortiSandbox BCC Adapter 63
Network Share 66
Scan Details 69
Quarantine 70
Sniffer 72
FortiAI 74
Scan Job 76
Job Queue 76
VM Jobs 77
File Job Search 78
URL Job Search 79
Overridden Verdicts 80
File On-Demand 81
URL On-Demand 85
Cloud Storage 89
Azure AWS S3 Settings 92
Azure File System 93
Scan Policy and Object 94
Scan Profile 94
File types 94
Scan Profile Pre-Filter Tab 95
Scan Profile VM Association Tab 96
Scan Profile Advanced Tab 100
File Scan Priority 102
File Scan Flow 103
URL Scan Flow 103

Fortinet Inc.
VM Settings 104
Virtual Machine 107
Clone Number for VM Image 108
VM Screenshot 109
OT Simulation 109
General Settings 113
Job Priority 116
Job Archive 117
Allowlist and blocklist 119
Web Category 121
Working Together With URL Pre-Filtering 123
Customized Rating 123
YARA Rules 124
Malware Package 128
URL Package 129
Threat Intelligence 130
Malware and URL Package Options 130
IOC Package 132
Global Network 133
System 136
Administrators 136
Admin Profiles 140
Wildcard Admin Authentication 142
Device Groups 144
Interfaces 144
Edit an interface 146
Edit administrative access 146
Create an aggregate interface 147
Failover IP 149
DNS Configuration 150
Static Route 150
LDAP Servers 151
RADIUS Servers 153
Mail Servers 155
FortiGuard 157
Certificates 158
Login Disclaimer 160
SNMP 160
Configuring the SNMP agent 161
MIB files 163
Event Calendar 164
Event Calendar Settings 166
Job View Settings 166
Settings 168

Fortinet Inc.
HA-Cluster 169
Cluster setup 170
HA-Cluster pre-requisites 171
Example configuration 171
Cluster level failover IP 175
Health Check 175
Using an aggregate interface 177
Cluster Management 178
Synchronization 179
Access privilege 179
Job Summary 179
Managing worker nodes 180
HA Roles, Syncronization and Failover 181
Primary and worker roles 181
Heartbeat Synchronization 184
Failover scenarios 184
Performance tuning 185
Setting primary node processing capacity 185
Upgrading or rebooting a cluster 186
Related CLI commands 186
Log & Report 187
Log Details 187
Logging Levels 187
Raw logs 188
Log Categories 188
Viewing logs in FortiAnalyzer 190
Customizing the log view 191
Columns 191
Summary Reports 192
Generate reports 192
Report Center 193
File Scan 194
File Scan Summary Report 195
Customizing the File Scan summary report page 197
URL Scan 197
URL Scan Summary Report 199
Customizing the URL Scan summary report page 199
Network Alerts 200
Network Alerts Summary Report 202
Customizing the Network Alerts summary report page 203
Log Servers 204
Local Log 205
Diagnostic Logs 206
Appendix A: Job Details page reference 207
Appendix B: Malware types 212
Change Log 214

Fortinet Inc.
Introduction
This guide describes how to configure and manage your FortiSandbox system and the connected Fortinet Security
Fabric devices. For documentation on Fortinet devices, such as FortiGate and FortiClient, see Fortinet Document
Library.
FortiSandbox overview
Fighting today’s Advanced Persistent Threats (APTs) requires a multi-layer approach. FortiSandbox offers the ultimate
combination of proactive mitigation, advanced threat visibility, and comprehensive reporting. More than just a sandbox,
FortiSandbox deploys Fortinet’s award-winning, dynamic antivirus and threat scanning technology, dual level
sandboxing, and optional integrated FortiGuard cloud queries to beat Advanced Evasion Techniques (AETs) and deliver
state-of-the-art threat protection.
FortiSandbox utilizes advanced detection, dynamic antivirus scanning, and threat scanning technology to detect viruses
and APTs. It leverages the FortiGuard web filtering database to inspect and flag malicious URL requests, and is able to
identify threats that standalone antivirus solutions may not detect.
FortiSandbox works with your existing devices, like FortiGate, FortiWeb, FortiClient and FortiMail, to identify malicious
and suspicious files and network traffic. It has a complete extreme antivirus database that will catch viruses that may
have been missed.
FortiSandbox can be configured to sniff traffic from the network, scan files on a network share with a predefined
schedule, quarantine malicious files, and receive files from FortiGate, FortiWeb, FortiMail, and FortiClient. For example,
FortiMail 5.2.0 and later allows you to forward email attachments to FortiSandbox for advanced inspection and analysis.
Files can also be uploaded directly to it for sandboxing through the web GUI or JSON API. You can also submit a website
URL to scan to help you identify web pages hosting malicious content before users attempt to open the pages on their
host machines.
FortiSandbox executes suspicious files in the VM host module to determine if the file is High, Medium, or Low Risk based
on the behavior observed in the VM sandbox module. The rating engine scores each file from its behavior log (tracer log)
that is gathered in the VM module and, if the score falls within a certain range, a risk level is determined.
FortiSandbox rating can be performed by either the standard method or by using artificial
intelligence (AI) mode. The default is AI mode, where the AI engine uses machine learning
technology to analyze the behavior of thousands of known malware. FortiSandbox uses this
engine to inspect file behavior inside a VM to detect indicators of new malware.
AI mode can be toggled in the CLI using the command ai-mode.
Key features of FortiSandbox include:
l Dynamic Anti-malware updates/Cloud query: Receives updates from FortiGuard Labs and send queries to the
FortiSandbox Community Cloud in real time, helping to intelligently and immediately detect existing and emerging
threats.

Fortinet Inc.
Introduction
l Code emulation: Performs lightweight sandbox inspection in real time for best performance, including certain
malware that uses sandbox evasion techniques and/or only executes with specific software versions.
l Full virtual environment: Provides a contained runtime environment to analyze high risk or suspicious code and
explore the full threat life cycle.
l Advanced visibility: Delivers comprehensive views into a wide range of network, system and file activity,
categorized by risk, to help speed up incident response.
l Network Alert: Inspects network traffic for requests to visit malicious sites, establish communications with C&C
servers, and other activity indicative of a compromise. It provides a complete picture of the victim host's infection
cycle.
l Manual analysis: Allows security administrators to manually upload malware samples via the FortiSandbox web
GUI or JSON API to perform virtual sandboxing without the need for a separate appliance.
l Optional submission to FortiSandbox Community Cloud: Tracer reports, malicious files and other information may
be submitted to FortiSandbox Community Cloud in order to receive remediation recommendations and updated in
line protections.
l Schedule scan of network shares: Perform a schedule scan of network shares in Network File System (NFS) v2 to
v4 and Common Internet File System (CIFS) formats to quarantine suspicious files.
l Scan job archive: You can archive scan jobs to a network share for backup and further analysis.
l Website URL scan: Scan websites to a certain depth for a predefined time period.
l Cluster supporting High Availability: Provide a non-interruption, high performance system for malware detection.
Windows XP is no longer supported. If you currently use Windows XP, migrate to a later
Windows version.
You can create custom VMs using pre-configured VMs, your own ISO image, or Red Hat VMs on VirtualBox. For more
information, contact Fortinet Customer Service & Support.
For information on hard disk hot-swapping procedure, system recovery procedure using Rescue Mode, and password
reset procedure, see the FortiSandbox Best Practices and Troubleshooting Guide in the Fortinet Document Library.
In addition to physical and virtual deployments, FortiSandbox is also available as a cloud-based advanced threat
protection service. For more information, see https://docs.fortinet.com/product/fortisandbox-cloud/.
CLI overview
Use FortiSandbox CLI commands for initial device configuration and troubleshooting. After initial device configuration,
use the GUI for most FortiSandbox functions. The GUI has a CLI Console which you can use as a CLI.
In version 3.2.0 and higher, the first time you log in using the CLI, you must set the admin
password (6–64 characters).
You can enable SSH and Telnet access on the port1 (administration) interface or any other administrative port set
through the CLI command set admin-port and access the CLI through SSH or Telnet to troubleshoot the device
including RAID related hard disk issues. You can also connect to the CLI through the console port.

Fortinet Inc.
Introduction
To connect to the CLI through the console port:
1. Connect the FortiSandbox unit console port to the management computer using the console cable provided.
2. Start a terminal emulation program on the management computer.
3. Use the following settings:
Serial line to connect to COM1
Speed (baud) 9600
Data bits 8
Stop bits 1
Parity None
Flow Control None
4. Press Open to connect to the FortiSandbox CLI. The login as page is displayed.
5. Type a valid administrator name and press Enter.
6. Type the password for this administrator and press Enter.
For example, to configure the IP address and gateway of the FortiSandbox device, use the following commands:
set port1-ip 192.168.0.10/24
set default-gw 192.168.0.1
For more information on FortiSandbox CLI commands, see the FortiSandbox CLI Reference Guide in the Fortinet
Document Library.
GUI overview
The GUI is a user-friendly interface for configuring settings and managing the FortiSandbox unit. Access the GUI from a
web browser on any management computer.
Connecting to the GUI
The FortiSandbox unit is configured and managed using the GUI. This topic covers connecting to the unit via the GUI.
To connect to the FortiSandbox GUI:
1. Connect the port1 (administration) interface or any other administrative port set through the CLI command set
admin-port to a management computer using an Ethernet cable.
2. Configure the management computer to be on the same subnet as the internal interface of the FortiSandbox unit:
a. Browse to Network and Sharing Center > Change adapter settings > Local Area Connection Properties >
Internet Protocol Version 4 (TCP/IPv4) Properties. These directions may vary based on the version of your
operating system.
b. Change the IP address of the management computer to 192.168.0.2 and the network mask to
255.255.255.0.
3. Start a supported web browser and browse to https://192.168.0.99.

Fortinet Inc.
Introduction
4. Type admin in the Name field, enter the Password, and click Login.
You can now proceed with configuring your FortiSandbox unit.
If the interfaces have been configured differently during installation, the URL and/or permitted
administrative access protocols may no longer be in their default state.
GUI interface
The GUI interface displays a green banner at the top showing system information and command buttons.
The following options are available:
Refresh Click the Refresh icon to refresh the page.
For some pages such as Scan Job > File Job Search, if you click
Refresh, you lose your current search criteria. Use the Refresh icon
inside the content pane to continue searching without losing your
criteria.
CLI Console Click the CLI Console button >__ to open the CLI Console pane. See CLI Console on
page 11.
Notifications The bell icon displays messages and notifications that require your attention.
Online Help and Video The question mark icon lets you quickly access the Online Help and Video Tutorials.
Tutorials Online Help links to this Administration Guide in the Fortinet Document Library where
you can find information about FortiSandbox and other Fortinet products.
Video Tutorials links to the Fortinet Video Library for FortiSandbox at
https://video.fortinet.com/product/fortisandbox where you can find video tutorials
showing how to integrate other Fortinet products, including FortiGates, to FortiSandbox.
User The user dropdown list lets you change the user password or logout.

Fortinet Inc.
Introduction
CLI Console
You can log into the CLI Console in a window in the GUI. You can issue commands in the CLI Console just like the
FortiSandbox CLI.
To connect to the CLI Console:
1. In the banner, click the CLI Console button >__ at the top right.
The CLI Console pane opens.
2. Click Connect to connect to the console.

The console prompts you for your login information.
You can issue commands in the CLI Console just like the FortiSandbox CLI. For more information on FortiSandbox
CLI commands, see the FortiSandbox CLI Reference Guide in the Fortinet Document Library.
3. To disconnect, click Disconnect or use Ctrl+C.
The CLI Console has the following buttons:
Connect / Toggles the connection to the console.

Disconnect
Clears the console.
Downloads the contents of the console to a text file cliConsole.txt on your local PC.
Maximum is 1000 lines.

Fortinet Inc.
Introduction
Copies the contents of the console to the clipboard. Maximum is 1000 lines.
Expands and detaches the console from the GUI and opens it in a new browser tab or
window.
Closes the CLI Console.
The CLI Console can only connect to a local FortiSandbox.

In HA-Cluster, you cannot use the primary node to open a worker node's CLI Console.
Default port information
FortiSandbox treats Port1 or any other administrative port set through the CLI command set admin-port as reserved
for device management, and Port3 be reserved for the Windows VM to communicate with the outside network. The other
ports are used for file input and communication among cluster nodes. In cluster mode, FortiSandbox uses TCP ports
2015 and 2018 for cluster internal communication. If the unit works as a Collector to receive threat information from other
units, it uses TCP port 2443
The following tables list the default open ports for each FortiSandbox interface.
FortiSandbox 2000E, and 3000E default ports
Port Type Default Open Ports

(Interface)
Port1 RJ-45 TCP ports, 22 (SSH), 23 (Telnet), 80 and 443 (GUI), 514 (OFTP communication with
FortiGate, FortiWeb, FortiClient & FortiMail), SNMP local query port.
FortiGuard Distribution Servers (FDS) use TCP port 8890 for download. The
FortiSandbox will use a random port picked by the kernel.
FortiGuard Web Filtering servers use UDP port 53 or 8888. The FortiSandbox will use a
random port picked up by the kernel.
Fortinet FortiSandbox VM download uses TCP port 443 for download. The
FortiSandbox will use a random port picked by the kernel.
FortiSandbox uses UDP port 53 or 8888 and TCP port 443 of the Community Cloud
server to query existing results. Before release 3.0.0, if enabled, FortiSandbox uploads
detected malware information to TCP port 443 of the Community Cloud server. Since
3.0.0, the TCP ports to use on server-side are 25, 465 or 587. The FortiSandbox will use
a random port picked up by the kernel.
FortiSandbox uses TCP port 514 to communicate with regional servers when using
Windows Cloud VM. FortiSandbox also uses TCP port 443 to communicate with
MacOS server farm when using MacOS Cloud VM.
If you configure an internal mail server, internal DNS server, remote syslog server,
LDAP server, SNMP managers, NTP server, or override the web filtering server IP
address, communication is recommended to be through this interface. Ensure that the
applicable routing is configured.

Fortinet Inc.
Introduction
Port Type Default Open Ports

(Interface)
Port2, Port4 RJ-45 No service listens except OFTP. If user specifies it as an administration port through CLI
command set admin-port, TCP ports 80 and 443 will be opened for web UI.
Port3 RJ-45 No service listens. Reserved for guest VM to communicate with the outside network.
Port5, Port6 SFP+ No service listens except OFTP. If user specifies it as an administration port through CLI
command set admin-port, TCP ports 80 and 443 will be opened for web UI.
All ports mentioned above are the same for both IPv4 and IPv6 protocols.
You can dynamically change system firewall rules using the iptables CLI command. New
rules will be lost after a system reboot.
If port3 of the FortiSandbox is connected to an interface behind the FortiGate device, make
sure that the egress WAN interface does not have the Scan Outgoing Connections to Botnet
Sites feature enabled, nor any active security profiles as this might impact the detection rate. If
this is not possible, we recommend connecting the FortiSandbox port3 to a different egress
WAN port or directly to the Internet in front of the perimeter firewall.
For more information on FortiSandbox 2000E, and FortiSandbox 3000E interfaces, see Interfaces on page 144.

Fortinet Inc.
Configuration checklist
Use the following checklist to verify you have completed all of the general configuraton tasks.
Task Description
Go to Dashboard > Status > System Information

Update the firmware on page 14
widget > Firmware Version.

Change the system host name on page 15
widget > Hostname.
Backup or restore the system configuration on page Go to Dashboard > Status > System Information
15 widget > System Configuration.

Configure the system time on page 18
widget > System Time.
Change the administrator password on page 19 Go to System > Administrators.
Change the GUI idle timeout on page 19 Go to System > Settings.
Go to Dashboard > Status > Licenses widget >

Verify the Windows VM license is activated
Microsoft VM.

Upload and activate the Microsoft license Microsoft Office.
After the license uploads, referesh the web page.
Toggle left-side menu style on page 21 Go to System > Settings.
Verify Services licenses are valid (Antivirus, Web Go to Dashboard > Status > Licenses widget >
Filtering, and Instustrial Security Service). Services

Verify connectivity and services are online
Connectivity and Services Widget.
Go to Dashboard > Status > System Resources

Reboot and shut down the unit on page 21
widget.
Select your user name from the top right corner of the
Log out of the unit on page 22
banner, and select Logout from the dropdown.
Go to Scan Job > File On-Demand > Submit File.

Perfom a basic test
Update the firmware
Before any firmware update, complete the following:

Fortinet Inc.
l Download the FortiSandbox firmware image and Release Notes document from the Fortinet Customer Service &
Support portal. Review the Release Notes, including the special notices, upgrade information, product integration
and support, and resolved and known issues.
l Backup your configuration file. It is highly recommended that you create a system backup file and save it to your
management computer. You can also schedule to back up system configurations to a remote server.
l Plan a maintenance window to complete the firmware update. If possible, you may want to setup a test environment
to ensure that the update does not negatively impact your network.
l Once the update is complete, test your FortiSandbox device to ensure that the update was successful.
Firmware best practice:

Stay current on patch releases for your current major release. Only update to a new major
release or version when you are looking for specific functionality in the new major release or
version. For more information, see the FortiSandbox Release Notes or contact Technical
Support.
To update the FortiSandbox firmware:
1. Go to Dashboard > Status > System Information widget > Firmware Version.
2. Click the View all firmware link beside Firmware Version.
3. Click Upload firmware and then click Upload File to locate the firmware image on your management computer.
4. Click Submit to start the upgrade.
Change the system host name
The System Information widget will display the full host name. You can change the FortiSandbox host name as required.
To change the host name:
1. Go to Dashboard > Status > System Information widget > Hostname.

2. Click the Change link beside Hostname.
3. In the New Name field, type a new host name.
The host name may be up to 50 characters in length. It may include US-ASCII letters, numbers, hyphens, and
underscores. Spaces and special characters are not allowed.
4. Select Apply.
Backup or restore the system configuration
It is recommended that you create a system backup file as part of your maintenance plan. Always perform a backup
before upgrading firmware or making major system configuration changes. Save these configuration backups to your
management computer or external site in the event that you need to restore the system after a network event.
The FortiSandbox configuration file is in binary format and manual editing is not supported.

Fortinet Inc.
To backup the FortiSandbox configuration to your local management computer:
1. Go to Dashboard > Status > System Information widget > System Configuration.

2. Click the Backup/Restore line beside System Configuration.
3. Under Local Backup, click Backup to save your backup file to your management computer.
To backup the FortiSandbox configuration to a remote server:
1. Go to Dashboard >Status > System Information widget > System Configuration.

3. Under Remote Backup, configure the following settings:
Server Type SCP server type is selected by default.
Server Address Enter the server IP address.
File Path Enter the file path.
Username Enter the username to log in to the remote server.
Password Enter the password to log in to the remote server.
Backup Schedule Set the back up frequency.
4. Click Set Remote Backup to save your settings.
To restore the FortiSandbox configuration:
1. Go to Dashboard > Status > System Information widget > System Configuration.

3. Under Restore, click Restore file, locate the backup file on your management computer, then click Restore to load
the backup file.
4. Select OK in the confirmation dialog box. Once the configuration restore process is completed, you will be
redirected to the log in page.
By performing a system restore, all of your current configurations will be replaced with the
backup data. When users select Restore Administrators, Admin Profiles, Certificates, LDAP
Servers and Radius Servers, all of this information will be overridden; otherwise, current
settings are kept. The system will reboot automatically to complete the restore operation. Only
backup configurations from the previous or same release are supported.
When you restore a backup configuration from to a unit in cluster mode, the network
configuration and HA cluster related configuration are not restored. The unit will be in
standalone mode. You will need to configure the network settings and add the unit back to
cluster.
To backup the FortiSandbox configuration using SCP or TFTP:
1. Open a CLI console window.

2. Enter the backup-sysconf command followed by the following syntax:
backup-sysconf [-s|-t[scp|tftp]|-u|-f]

Fortinet Inc.
The options available are as follows:
-h Help Information
-s Remote SCP/TFTP server IP
-t Protocol type: SCP or TFTP
-u Scp/tftp user name
-f Remote server folder and the backup file name
Example 1:
backup-sysconf –s1.2.3.4 –utest –tscp –f/home/test/fsa/backup.conf
Example 2:
backup-sysconf –s1.2.3.4 –utest –ttftp –f/home/test/fsa/backup.conf
To restore the FortiSandbox configuration using SCP, FTP or TFTP:
1. Open a CLI console window.

2. Enter the restore-sysconf command followed by the following syntax:
restore-sysconf [-s|-t[scp|tfp|tftp]|-u|-f|-o]
The options available are as follows:
-h Help Information
-s Remote SCP/FTP/TFTP server IP
-t Protocol type: SCP, FTP or TFTP
-u Scp/ftp/tftp user name
-f Remote server folder and the backup configuration file name
-o [Optional] Restore Administrators, Admin Profiles, Certificates, LDAP Servers and Radius Servers
Example 1:
restore-sysconf –s1.2.3.4 –utest –tscp –f/home/test/fsa/backup.conf -o
Example 2:
restore-sysconf –s1.2.3.4 –utest –ttftp –f/home/test/fsa/backup.conf
Example 3:
restore-sysconf –s1.2.3.4 –utest –tftp –f/fsa/backup.conf -o

Fortinet Inc.
Configure the system time
The FortiSandbox unit’s system time can be changed from the Dashboard. You can configure the FortiSandbox system
time locally or select to synchronize with an NTP server.
To configure the system time:
1. Go to System Information widget > System Time.

2. Click the Change link beside System Time.
3. Configure the following settings:
System Time The date and time according to the FortiSandbox unit’s clock at the time that this tab
was loaded.
Time Zone Select the time zone in which the FortiSandbox unit is located.
Set Time Select this option to manually set the date and time of the FortiSandbox unit’s clock,
then select the Hour, Minute, Second, Month, Day, and Year fields before you select
Apply.
Synchronize with NTP Select this option to automatically synchronize the date and time of the
Server FortiSandbox unit’s clock with an NTP server. The synchronization interval is hard-
coded to be 5 minutes. You can use the FortiGuard NTP server or specify one NTP
server.
Server Enter the IP address or domain name of an NTP server. To find an NTP server that
you can use, go to http://www.ntp.org. Ensure that the applicable routing is
configured when an NTP server is used.
4. Click Apply to apply the changes, then select OK in the confirmation dialog box.
You may need to log in again after changing the time.

Fortinet Inc.
Change the administrator password
By default, you can log into the GUI using the admin administrator account and no password. It is highly recommended
that you add a password to the admin administrator account. For improved security, you should regularly change the
admin administrator account password and the passwords for any other administrator accounts that you add.
To change an administrator’s password:
The user can click the current login username from the top right corner and select Change Password or:
1. Go to System > Administrators.
2. Select the administrator's account that you want to edit .
3. Click the Edit button in the toolbar.
4. Change the password.
Change the GUI idle timeout
By default, the GUI disconnects administrative sessions if no activity takes place for five minutes. This idle timeout is
recommended to prevent someone from using the GUI on a PC that has been logged into the GUI and left unattended.
To change the idle timeout length:
1. Go to System > Settings.

2. Change the idle timeout minutes (1 to 480 minutes) as required.
3. Select OK to save the setting.
In this page you can also reset all widgets to their default settings.
Microsoft Windows VM license activation
When Fortinet ships FortiSandbox, the default Windows guest VM image is activated. After a RMA or new Windows
VM installation, the Windows VM license will be in an de-activated state and need re-activation.

Fortinet Inc.
To verify the Windows VM license is activated:
1. Go to Dashboard > Status > Licenses widget. A green checkmark appears next to FortiSandbox-VM.
2. To activate the license, click Go to Windows VM .
Microsoft Office license upload and activation
You can purchase add-on Office licenses from Fortinet and upload them from the Dashboard > Status > Licenses
widget.
By default, physical FortiSandbox models are shipped with a number of Microsoft Office
license keys. You can purchase more licenses from Fortinet to improve the scan capacity of
Microsoft Office files, or to activate Microsoft Office software inside a newly installed optional
Windows guest image.
To upload a Microsoft Office license:
1. Go to Dashboard > Status > Licenses widget > Microsoft Office.

2. Click the upload link beside Microsoft Office.
There is no upload license link for VMware, KVM, and Hyper-V.

Fortinet Inc.
3. Click Upload Microsoft License File to browse for the license file on your management computer.
4. Click Submit.
The FortiSandbox unit no longer reboots after uploading the license file.
After the license file is installed, you can scan Microsoft Office files including .docx and .pptx file.
Refresh current web page
Click the Refresh button on top of the website; the current web page will be refreshed.
Toggle left-side menu style
By default, the left-side menu is in compact mode. If you want to revert back to the full style:
2. Select Expanded in Menu Type dropdown.
3. Click OK to save the setting.
Reboot and shut down the unit
Always reboot and shut down the FortiSandbox system using the options in the GUI or CLI to avoid potential
configuration or hardware problems.
To reboot the FortiSandbox unit:
1. Go to Dashboard > Status > System Resources widget.

2. Click Reboot.
3. If you want, enter a reason for the reboot in the Reason field, and then click OK to reboot the unit.
4. After reboot, the FortiSandbox VM system will initialize again. This initialization can take up to 30 minutes. The
Windows VM icon in the System Information widget will show a warning sign before the process completes.
It is normal to see the following critical event log in Log Access after FortiSandbox boots up:
The VM system is not running and might need more time to startup. Please check system logs
for more details. If needed, please reboot system.
After FortiSandbox is upgraded to a new firmware version, the system might clean up data and
a Database is not ready message will be displayed. The clean up time depends on the size of
historical data.

Fortinet Inc.
To shut down the FortiSandbox unit:
1. Go to Dashboard > Status > System Resources widget.

2. Select Shutdown.
3. Enter a reason for the shutdown in the Reason field.
4. Select OK to shutdown the unit.
Log out of the unit
If you close the browser or leave the GUI to browse another website, you will remain logged in until the idle timeout
period elapses.
1. Select your user name from the top right corner of the banner.
2. Select Logout from the dropdown to log out of your administrative session.
Perform a basic test
After FortiSandbox is configured, perform a simple Scan Job on a file to verify the service is working as expected.
To perform a basic test:
1. Go to Scan Job > File On-Demand.

2. Click Submit File. The Submit New File dialog opens.
3. Click Upload File and navigate to the file on your device.
4. Enable Force to scan the file inside VM > Force to scan inside the following VMs and select the VM to scan inside.
5. and then click Submit.
6. Close the dialog and wait a few mintues for FortiSandbox to process the file. After the file is processed, the Status
will change to Done and the Rating is displayed.
7. To view the report:
a. Click the View Details icon.
b. Click the View Job Detail icon.
c. Click the Overview, Tree View and Details tab to view the job details.
d. Click Export Job Detail page to PDF to download the report.

Fortinet Inc.
Dashboard widgets
Dashboard > Status displays widgets that provide system information and enable you to configure basic system settings.
All widgets appear in the Dashboard > Status page which you can customize.
The menu is in Compact mode by default. You can toggle between Compact and Expanded in System > Settings >
Menu Type.
In Expanded mode, you can quickly locate a menu item by entering the term in the Search bar at the top of the left pane.
If the unit is the primary node in a cluster, the displayed data shows a summary of all nodes in the cluster.
The following widgets are available:
System Information Displays basic information about the FortiSandbox system, such as the serial
number and system up time.
Licenses Displays license status information.
Connectivity and Services Displays connectivity and services.
Scan Performance Displays scan performance over a time period.
System Resources Displays the real-time usage status of the CPU, memory, and disk usage.
Scan Statistics Displays information about files scanned over a time period, This including
Sniffer, Devices, On-Demand, Network, Adapter, and URL.

Fortinet Inc.
Dashboard widgets
File Scan Displays the number of clean, suspicious, and malicious events that occurred at
specific times over a time period. Hover the pointer over a colored portion of a bar
in the graph to view the number of events of the selected type that occurred.
Top Devices Displays the total scanning jobs for the top five devices over a time period.
Hover the pointer over a bar in the graph to view the number of scanning jobs for
that device.
Pending Job Statistics Displays pending scan job numbers over a time period. This widget allows you to
monitor the workload trend on your FortiSandbox.
Top Critical Logs Displays recent critical logs, including the time they occurred and a brief
description.
Sniffer Traffic Throughput Displays sniffed traffic throughput across time.
Customized Threats Displays threat level distribution over two customized time intervals.
Distribution
Quick Download To quickly search a file according to its checksum. If found, the user can
download the file, download the PDF report, and view job detail.
System Resources Usage Displays system resources usage over a time period, including CPU, memory,
and disk usage.
Customize the Dashboard
You can customize Dashboard > Status. You can select which widgets to display, where they are located on the page,
and whether they are minimized or maximized.
To move a widget:
Position your pointer on the widget’s title bar, then click and drag the widget to its new location.
To refresh a widget:
Click the refresh icon in the widget’s title bar to refresh the data presented in the widget.
To reset a widget back to default settings:
Click the Reset button on the floating widget tool bar.
To add a widget:
In the floating toolbar, select Add Widget, then select the widgets you want to add. To hide a widget, click the close icon
in its title bar.
The following is a list of widgets you can add to Dashboard > Status.
l System Information
l Licenses

Fortinet Inc.
Dashboard widgets
l Connectivity and Services

l Scan Performance
l System Resources
l Scan Statistics
l File Scan
l Top Devices
l Pending Job Statistics
l Top Critical Logs
l Sniffer Traffic Throughput
l Customized Threats Distribution
l Quick Download
l System Resources Usage
To go to the top of Dashboard > Status:
After scrolling down the Dashboard > Status page, a Back to Top button appears in the floating widget tool bar. Click this
button to go to the top of the page.
To edit a widget:
1. Select the edit icon in the widget’s title bar to open the edit widget window.
2. Configure the following information, and then select OK to apply your changes:
Custom widget title Optionally, type a custom title for the widget. Leave this field blank to use the default
widget title.
Refresh interval Enter a refresh interval for the widget, in seconds.
Top Count Select the number of entries to display in the widget.

This option is only available on widgets where a top count is applicable.
Time Period Select a time period to be displayed from the dropdown list.
This option is only available on widgets where a time period is applicable.
Show unprocessed detection alert notifications on Dashboard > Status
An unprocessed detection alert occurs when a record is in the Action Required state in FortiView. These records can
also be seen by navigating to Dashboard > Operation Center > Action > Action Required. FortiSandbox will record these
items and display them as an unprocessed detection alert depending on the configuration.

Fortinet Inc.
Dashboard widgets
To show alarms of unprocessed detections on Dashboard > Status:

2. Enable Show alarms of unprocessed detections on Dashboard.
3. Configure the time period to display unprocessed detections.

4. Select the ratings for unprocessed detections.
After you enable Show alarms of unprocessed detections on Dashboard, the banner displays a notification under the bell
icon showing ## unprocessed detections in last xx days/hours/weeks.
In HA-Cluster mode, each node can have its own Show alarms of unprocessed detections on
Dashboard setting.
System Information
The System Information widget displays information about FortiSandbox and enables you to configure basic system
settings.
Firmware Version The version and build number of the firmware installed on the FortiSandbox unit.
When new firmware is available, a blinking New firmware available link appears.
Clicking the link redirects you to a page where you can download and install
available firmware, or manually upload firmware. You can also choose to create
backup configurations.
Hostname The name assigned to this FortiSandbox unit. Click Change to edit the
FortiSandbox host name.
Serial Number The serial number of this FortiSandbox unit. The serial number is unique to the
FortiSandbox unit and does not change with firmware upgrades. The serial
number is used for identification when connecting to the FortiGuard server.
System Configuration The date and time of the last system configuration backup. Click Backup/Restore
to go to the System Recovery page.
System Time The current time on the FortiSandbox internal clock or NTP server. Select Change
to configure the system time.
Unit Type The HA cluster status of the device: Standalone, Primary, Secondary, or Worker.
In an HA-Cluster, click Change to change the cluster status of the device.

Fortinet Inc.
Dashboard widgets
If the rating engine is not available or out-of-date, a red blinking No Rating Engine
message appears.
Uptime The duration of time that the FortiSandbox unit has been running since boot up.
Username The administrator that is currently logged in.
Licenses
This widget displays information about the licenses on your FortiSandbox unit. Only the licenses available for your
FortiSandbox appear.
Hover the pointer over a colored icon to see the license status and details.
Click a link beside a license to upload a license or go to its settings page.
Windows VM Microsoft Windows VM license activation and initialization status.

For more information, see Log & Report > Events > VM Events.
In addition to the pre-installed default set of Windows VM images, you can also
download, install, and use optional images from the Optional VMs section in the
VM Image page. Extra Windows OS licenses might be needed if the unit has none
available. For example, when you try to use a Windows 10 image on a
FortiSandbox unit, you might need to purchase Windows 10 license keys from
Fortinet. After purchase, download your license file from the Fortinet Customer
Service & Support portal. Then use the Upload License link next to the Windows
VM field to install the license. The system reboots and activates the newly-
installed Windows guest VMs.
Windows Cloud VM This is only available on the VM00 model. Windows Cloud VMs are an extension
of units' scan power by sending files to Fortinet Sandboxing cloud to scan. This
line shows the date that Windows Cloud VM contract expires, and number of
remote clones reserved in cloud.
In a cluster environment, each VM00 unit in the cluster can purchase Windows
cloud VM seat counts to expand the cluster's scan power. These cloud VM clones
are local to that VM00 unit and are not shared.
MacOS Cloud VM The date the MacOS contract expires and the number of remote clones reserved
in Fortinet MacOS cloud. In cluster mode, the total reserved clone numbers
displays on the primary node. All cluster units share a collected pool of reserved
clones from each unit. This means that even nodes with no MacOS VM contract
can still upload MacOSX files to the cloud for scanning.
Microsoft Office Microsoft Office product activation status. Click the upload icon to upload a
Microsoft Office license file.
The active icon and caution icon can both appear when Microsoft Office software
is activated on some enabled VMs but not activated on other enabled VMs. For
more information, see Log & Report > Events > VM Events.
Customized VM Customized VM license activation and initialization status.
Mail Transfer Agent Service Mail Transfer Agent Service license activation and initialization status.

Fortinet Inc.
Dashboard widgets
VM Status Status of the FortiSandbox guest VM accessing the outside network. This section
only displays VMs that are enabled.
Antivirus The date that the antivirus database contract expires. If the contract expires within
15 days, a caution icon appears.
Web Filtering Status of the Web Filtering query server.
Industrial Security Service Status of the Industrial Security Service.
Connectivity and Services
This widget displays information about connectivity and services. The icon color indicates if the service is up or is
inaccessible. Hover the pointer over an icon to see details about that service.
Scan Performance
This widget displays scan performance information including the number of files scanned, performance, and the security
verdict.
System Resources
This widget displays the following information and options:
CPU Usage Gauges the CPU percentage usage.
Memory Usage Gauges the memory percentage usage.
Disk Usage/RAM Disk Usage/ Gauges the disk percentage usage. RAM disk is used by the VM clone system.
VM Disk Usage
Reboot/Shutdown Options to shut down or reboot the FortiSandbox device.

Fortinet Inc.
Dashboard widgets
Scan Statistics
This widget displays information about the files that have been scanned over a specific time period, including the
following information.
Inputs The input type from which the files were received.
Device, Adapter, On Demand, The URL type is for scanned URLs received from FortiMail devices, URLs
Network Share, Sniffer, URL, extracted from forwarded email body of BCC adapter, URLs from ICAP adapter,
All Sources and sniffed URLs in email traffic.
Pending The number of files pending. Pending files are files that are have just been
received and have not been put into the job queue, and files that have been put
into the job queue but have not yet been processed.
Processing The number of files that are being processed.
Malicious The number of files scanned for each input type that were found to be malicious in
the selected time period.
Click the number to view the associated jobs.
High Risk The number of files scanned for each input type that were found to be suspicious
and posed a high risk in the selected time period.
Medium Risk The number of files scanned for each input type that were found to be suspicious
and posed a medium risk in the selected time period.
Click the link to view the associated jobs.
Low Risk The number of files scanned for each input type that were found to be suspicious
and posed a low risk in the selected time period.
Clean The number of files scanned for each input type that were found to be clean in the
selected time period.
Other The number of files for each input type which have an unknown status. Unknown
status files include jobs which have timed out, crashed, canceled by the user
through a JSON API call, or terminated by the system.
Total The total number of files for each input type in the selected time period.
If the device is the primary node of a cluster, the numbers in this widget are the total job
numbers of all cluster nodes.

Fortinet Inc.
Dashboard widgets
File Scan
This widget shows the number of clean, suspicious, and malicious events that have occurred at specific times over a
selected time period.
The data can be displayed hourly or in daily. If it is set to Hourly, a bar displays each hour over the time period. Hourly
data is only available when the time period is set to the Last 24 hours. If it is set to Daily, a bar shows each day over the
time period.
Shift-select a period to zoom in. Shift-scroll to move left and right.
Hover the pointer over a colored portion of a bar in the graph to see the number of events of that type for that time period.
Top Devices
This widget displays the total number of scanning jobs for the top five devices over a selected time interval.
Hover the pointer over a bar in the graph to see the number of scanning jobs for that device.
Pending Job Statistics
This widget displays the pending job numbers of each input source.
Hover the pointer over the graph displays the number of pending jobs for the on-demand, sniffer, and Fortinet devices
over a selected time period. Shift-select a period to zoom in. Shift-scroll to move left and right.
Top Critical Logs
This widget displays recent critical logs, including the time they occurred and a brief description of the event.
Sniffer Traffic Throughput
This widget displays the Sniffer Traffic Throughput in MB/s over a sselected time period.
Shift-select a period to zoom in. Shift-scroll to move left and right.
Customized Threats Distribution
This widget displays a chart of the detected malware rating distribution for two specified time periods. Hover the pointer
over parts of the chart to see more details.
Quick Download
This widget works with the CDR feature in FortiGate or FortiMail. You can quickly find a file according to its checksum
(SHA256/SHA1/MD5). If found, you can download the original file, download the jobs PDF report, and view job details.
The original file is in zip format and protected with the password fortisandbox.

Fortinet Inc.
Dashboard widgets
System Resources Usage
This widget displays a timeline of CPU, memory, and RAM disk usage over a specified time period.
Hover the pointer over the graph for more details. Shift-select a period to zoom in. Shift-scroll to move left and right.
Operation Center
Use this page to view malware that has been detected and its status from a security update perspective. This page
displays severity levels, victim IP addresses, incident time, threat, and current action status.
When a dynamic signature is sent back to FortiGate, FortiMail, or FortiClient, check the status information that it has
been done.
When a new antivirus update is received, FortiSandbox rechecks all samples not covered by the standard antivirus
package and update its status. Malware detected by FortiSandbox before an antivirus signature is available is marked as
Zero-day.
Refresh Refresh the entries after applying search filters.
Search Show or hide the search filter field.
Time Period Select the time period from the dropdown list. Select one of the following: 24 Hours, 7
Days, or 4 Weeks.
Clear all removable Click the trash can icon to clear all removable filters.
filters
Export to report Click Export to report to create a PDF or CSV snapshot report. The time to generate the
report depends on the number of events. You can wait to view the report or find the
report later in Log & Report > Report Center.
Add Search Filter Click the search filter field to add search filters.
Use search filters to define what to display in the GUI. For example, you can use a field
like source IP address as the search criterion.
View Job Show the job detail page.

Fortinet Inc.
Dashboard widgets
Number of Blocks After a malware's signature is added to a Malware package and downloaded by
FortiGate, FortiGate can block subsequent occurrences. Hover the pointer over the icon
to see the number of blocks of this Malware.
In Cloud An icon appears if the malware is available in the FortiSandbox Community Cloud.
In Signature An icon appears if the malware is included in the current FortiSandbox generated
Malware Package.
Perform Rescan Rescan the suspicious or malicious entry. In the Rescan Configuration dialog box, you
can force the file to do Sandboxing scan even if was detected in former steps of Static
Scan, AV Scan, Cloud Query, or stopped from entering VM by Sandboxing-prefilter
setting.
The rescan job is in Scan Job > File On-Demand.
Archived File An icon appears if the file is an Archived File.
Pagination Use pagination options to browse entries.
This page displays the following information:
Severity The severity rating of the malware, including:

l Low Risk
l Medium Risk
l High Risk
l Malicious
If a file is detected by FortiSandbox first before an antivirus signature is available, the

Severity level is Zero-day.
Source IP address of the client that downloaded the malware. Use the column filter to sort the
entries.
Incident Time Date and time the file was received by FortiSandbox. Use the column filter to sort the
entries.
Threat Name Name of the virus. Use the column filter to sort the entries. If the virus name is not
available, the malware's Severity is used as its Threat Name.
Action Current action applied to the malware. Use this field to track responses to the incident,
including:
l Action Taken.
l Ignore.
l Action Required. The user can mark an action against a single job or to all jobs in
the same file.
To view file details:
1. Select a file.
2. Click the View Details icon to open a new tab.
For descriptions of the View Details page, see Appendix A: Job Details page reference on page 207.

Fortinet Inc.
Dashboard widgets
Threats by Topology
Go to Dashboard > Threats by Topology. It combines both device and threat information together.
Devices (or input sources) are displayed in separated top level circles and the threats that occur on them are displayed
inside them as second level circles. The radius of threat circle is proportional to threat event counts. Threat circles can be
multiple levels and each level represents a subnet level.
Clicking on the circles will drill down to the host level. At the host level, clicking on a circle will display a new page to show
threat details.
There are host and time range filters in the toolbar on top.
Hosts Select the host.
Time Period Select the time period from the dropdown list. Select 24 Hours, 7 Days, or 4
Weeks.
Toggle Light Select Toggle Light to change the topology background color.
Toggle Network Alert Data Select to toggle and include Network Alert data from sniffed traffic.

Fortinet Inc.
Dashboard widgets
Threats by Hosts
On this page you can view and drill down all threats grouped by hosts. The Host can be a user name or email address (if
it is available) or a device that is the target of a threat. This page displays all threats that have occurred to the user or
victim host during a time period. Click the View Jobs icon or double-click an entry in the table to view the second level.
Threats by Hosts - level 1
Time Period Select the time period from the dropdown list. Select 24 Hours, 7 Days, or 4 Weeks.
Export Data Click the Export Data button to create a PDF or CSV snapshot report. You can wait till
the report is ready to view, or navigate away and find the report later in Log & Report >
Report Center page.
Refresh Click the refresh icon to refresh the entries displayed after applying search filters.
Add Search Filter Click the Search Filter field to add search filters. Click the Cancel icon to the left of the
search filter to remove the specific filter. Click the Clear All Filters icon in the search filter
field to clear all filters.
In this page, the threat target host or user name can be the search criteria. You can
input a partial value to search all records that contain it.
Search filters can be used to filter the information displayed in the GUI.
View Job Click the View Jobs icon to drill down the entry.
Pagination Use the pagination options to browse entries displayed.
Host/Username The device and username that is the target of threats. Click the column header to sort
the table by this column.
Note: A duplicate user name or host from a different VDOM is considered a different
user.
Device Name The device name. Click the column header to sort the table by this column.
# of Malicious Files The number of unique malicious files associated with the user for the time period
selected. Click the column header to sort the table by this column.
# of Suspicious Files The number of unique suspicious files associated with the user for the time period
selected. Click the column header to sort the table by this column.
# of Network Threats The number of unique network threats (attacker, botnet, and suspicious URL events)
associated with the user for the time period selected. Click the column header to sort the
table by this column.

Fortinet Inc.
Dashboard widgets
Timeline View the Threat Timeline Chart. When you click on any dot in the chart, all events
associated will be displayed. When you click on an event, the View Details page will
open.
Total Host The number of hosts displayed and total number of hosts.
Double-click an entry in the table or click the View Jobs icon to view the second level.
The following information is displayed:
Back Click Back button to return to the main landing page.
Threat Timeline Chart This chart displays the number of threats and types of threats which occurred to
the threat target during the period of time. Hover the mouse pointer over the dots
in the chart and more detailed threat information will be displayed.
Summary The following fields are displayed: Device, Threat Target, Time Period, Total
Files, number of: Malicious Files, Suspicious Files, and Network Events.
Details
Malicious Files Malicious file information including malware name, Threat Source, and number of
detection times. The options are:
l Click the View Jobs icon to drill down the entry.
l Click the malware name to view the related FortiGuard Encyclopedia page.
Suspicious Files Suspicious file information including file name, file type, rating, the malware
hosting address and number of detection times. Click the View Jobs icon to drill
down the entry.
Attacker Events Attacker event information including backdoor name, attack origin address and
port, attack destination address and port, and number of detection times.
Botnet Events Botnet event information including botnet name, user IP address, user port,
destination IP address, destination IP port and number of detection times.
URL Events Suspicious URL event information including site category, host or IP address,
URL, type, user IP address, user port and number of detection times.
Back Click the Back button to return to the main landing page.
View Details Click the View Details icon to view file information. The information displayed in the view
details page is dependent on the file type and risk level.

Fortinet Inc.
Dashboard widgets
Perform Rescan Click the icon to rescan the entry. In the Rescan Configuration dialog box, you can force
the file to do Sandboxing scan even if was detected in former steps of Static Scan, AV
Scan, Cloud Query, or stopped from entering VM by Sandboxing-prefilter setting.
Click the Close icon to close the dialog box. The rescan job can be found in Scan Job >
File On-Demand page.
Malicious Files Displays the date and time that the file was detected, malware name, source IP
address, and destination IP address.
Click the malware name to view the related FortiGuard Encyclopedia page.
Suspicious Files Displays the date and time that the file was detected, file type, rating, source IP address,
destination IP address and number of detection times, if available.
For more about the information available in the View Details pages for malicious and suspicious files, see Appendix A:
Job Details page reference on page 207.
When a file has been rescanned, the results of the rescan are displayed on this page. Select
the job ID to view the job details.
To create a snapshot report for all threats by users:
1. Select a time period from the Time Period dropdown list.

2. Click the Filter field to apply filters to further drill down the information in the report.
3. Click the Export Data button in the toolbar.
4. In the Report Generator, select either PDF or CSV for the report type.
5. Click the Generate Report button to create the report.
6. When the report generation is completed, select the Download button to save the file to your management
computer. You can navigate away and find the report later in Log & Report > Report Center page.
7. Click the Cancel button to exit the report generator.
The maximum number of events you can export to a PDF report is 1000. The maximum
number of events you can export to a CSV report is 15000. Jobs over that limit are not included
in the report.

Fortinet Inc.
Dashboard widgets
Threats by Files
On this page you can view and drill down all threats group by malware file. This page displays threats by filename, rating,
and number of targeted users and hosts. Click the View Jobs icon or double-click an entry in the table to view the second
level.
Threats by Files - level 1
Export Data Click the Export Data button to create a PDF or CSV snapshot report. The time period of
jobs included in the report depends on the selection made in the Time Period dropdown.
The time to generate the report is dependent on the number of events selected. You can
wait until the report is ready to view, or navigate away and find the report later in the Log
& Report > Report Center page.
Refresh Click the Refresh icon to refresh the entries displayed after applying search filters.
Add Search Filter Click the Search Filter field to add search filters. Click the Cancel icon to the left of the
search filter to remove the specific filter. Click the Clear All Filters icon in the search filter
field to clear all filters. When the filter Filename is used, click the = sign to toggle
between the exact and pattern search.
View Jobs Click the View Jobs icon to drill down the entry.
Filename The threat file name. Click the column header to sort the table by this column.
Rating The file rating. Click the column header to sort the table by this column.
# of Users The number of users affected. Click the column header to sort the table by this column.
Timeline View the Threat Timeline Chart. When you hover over any dot, all victim hosts infected
by that malware will appear in five minutes. When you click on any dot in the chart, all
events associated will be displayed. When you click on an event, the View Details page
will open.
Total Files The number of files displayed and the total number of files.

Fortinet Inc.
Dashboard widgets
Back Click the Back icon to return to the main landing page.
Add Search Filter Click the search filter field to add search filters. Click the cancel icon to the left of the search
filter to remove the specific filter.
Summary of Summary information including the file name, source IP address, destination IP address, time
period, download location, file type, threat type, submission information, and device
information (if available). If the malware appears more than once, the information is from its
most recent detection.
Details Detail information including user IP address. destination IP address, and number of detection
times. Select the View Jobs icon, or double-click on the row, to drill down the entry.
View Details Select the View Details icon to view file information. The information displayed in the
view details page is dependent on the file type and risk level.
Perform Rescan Click the icon to rescan the entry. In the Rescan Configuration dialog box, you can force
the file to do Sandboxing scan even if was detected in former steps of Static Scan, AV
Scan, Cloud Query, or stopped from entering VM by Sandboxing-prefilter setting.
Click the Close icon to close the dialog box. The rescan job can be found in Scan Job >
File On-Demand page.
When a file has been rescanned, the results of the rescan are displayed in this page. Select

Fortinet Inc.
Dashboard widgets
Detected The date and time that the file was detected by FortiSandbox. Click the column header
to sort the table by this column.
Filename Displays the filename. Clicking on the file name can link to a FortiGuard Encyclopedia to
provide more information if the rating is Malicious.
Source Displays the source IP address. Click the column header to sort the table by this
column.
Destination Displays the destination IP address. Click the column header to sort the table by this
column.
Rating Displays the file rating. Click the column header to sort the table by this column.
Total Jobs The number of jobs displayed and the total number of jobs.
For more about information in the View Details pages for malicious and suspicious files, see File Scan Summary Report
on page 195
To create a snapshot report for all threats by files:
1. Select a time period from the first dropdown list.

2. Select to apply search filters to further drill down the information in the report.
3. Click the Export Data button in the toolbar.
4. In the Report Generator, select either PDF or CSV for the report type.
5. Click the Generate Report button to create the report. You can wait until the report is ready to view, or navigate
away and find the report later in Log & Report > Report Center page.
computer.
7. Click the Cancel button to exit the report generator.
number of events you can export to a CSV report is 150000. Jobs over that limit are not
included in the report.
Threats by Devices
On this page you can view and drill down all threats grouped by devices. This page displays device name, number of
malicious files, and number of suspicious files. Double-click an entry in the table to view the second level, View Jobs.

Fortinet Inc.
Dashboard widgets
Threats by Devices - level 1
Export Data Click the Export Data button to create a PDF or CSV snapshot report. The time period of
included jobs in the report depends on the selection made in the Time Period dropdown.
The time to generate the report is dependent on the number of events selected. You can
wait until the report is ready to view, or navigate away and find the report later in Log &
Report > Report Center page.
Add Search Filter Click the Search Filter field to add search filters. Click the Cancel icon beside the search
filter to remove the specific filter. Click the S icon in the search filter field to clear all filters.
Search filters can be used to filter the information displayed in the GUI. You can input a
partial value to search all records that contain it.
Device Displays the device name. Click the column header to sort the table by this column.
Note: A different VDOM or protected email domain on the same device is considered a
different device.
# of Malicious Files The number of malicious files submitted by the device. Click the column header to sort the
# of Suspicious Files The number of suspicious files submitted by the device. Click the column header to sort the
Timeline View the Threat Timeline Chart of the device. When you hover on any dot, all victim hosts
managed by the device appears within five minutes. When you click on any dot in the chart,
all events associated displays. When you click on an event, the View Details page opens.
Total Devices The number of devices displayed and the total number of devices.
Summary of Displays a summary of the device type selected.
Details Detailed information includes device name, selected time period, and total number of
malicious and suspicious files.

Fortinet Inc.
Dashboard widgets
Malicious Files Malicious file information including malware name, destination IP address, and
number of detection times. Click the View Details icon or double-click the row to drill
down the entry.
Suspicious Files Suspicious file information including file name, file type, risk level, destination IP
address, and number of detection times.
Click the View Details icon or double-click the row to drill down the entry.
View Details Select the View Details icon to view file information. The information displayed in
the view details page is dependent on the file type and risk level.
Perform Rescan Click the icon to rescan the entry. In the Rescan Configuration dialog box, you can
force the file to do Sandboxing scan even if was detected in former steps of Static
Scan, AV Scan, Cloud Query, or stopped from entering VM by Sandboxing-
prefilter setting.
Click the Close icon to close the dialog box. The rescan job can be found in Scan
Job > File On-Demand page.
Malicious Files Displays the date and time that the file was detected, malware name, source IP
address, and destination IP address.
Suspicious Files Displays the date and time that the file was detected, file type, rating, source IP
address, destination IP address, and number of detection times, if available.
For more information about the malicious and suspicious files in the View Details pages, see Appendix A: Job Details
page reference on page 207.
When a file has been rescanned, the results of the rescan are displayed in this page. Select

Fortinet Inc.
Dashboard widgets
To create a snapshot report for all threats by devices:

3. Click the Export Data button in the toolbar. The Report Generator window opens.
4. Select either PDF or CSV for the report type. Optionally you can further define the report start/end date and time.
5. Click the Generate Report button to create the report. You can wait until the report is ready to view, or navigate
away and find the report later in Log & Report > Report Center page.
computer.
7. Click the Close icon or the Cancel button to quit the report generator.
in the report.

Fortinet Inc.
Security Fabric
FortiSandbox utilizes Fortinet antivirus to scan files for known threats and then executes files in a VM host environment.
Unlike traditional sandboxing solutions, FortiSandbox is able to perform advanced static scans, which can quickly and
accurately filter files, and utilize up-to-the-minute threat intelligence of FortiGuard services.
There are five methods to import files to your FortiSandbox: sniffer mode, device mode (including FortiGate, FortiMail,
FortiWeb, and FortiClient endpoints), adapter, network share, and on demand (including on demand through JSON API
call and GUI submission). In sniffer mode, the FortiSandbox sniffs traffic on specified interfaces, reassembles files, and
analyzes them. In device mode, your FortiGate, FortiWeb, FortiMail, or FortiClient endpoints are configured to send files
to your FortiSandbox for analysis, and can receive malware packages from the FortiSandbox. Network share allows you
to scan files located on a remote file share as scheduled, and quarantine bad files. On demand allows you to upload files,
URLs inside a file, or archived files directly to your FortiSandbox for analysis. Different adapters allow FortiSandbox to
work with third-party products smoothly.
FortiSandbox will execute code in a contained virtual environment by simulating human behavior and the output is
analyzed to determine the characteristics of the file. Inspection is run post-execution and all aspects of the file are
examined. FortiSandbox checks files for the dozens of suspicious characteristics, including but no limited to:
l Evasion techniques
l Known virus downloads
l Registry modifications
l Outbound connections to malicious IP addresses
l Infection of processes
l File system modifications
l Suspicious network traffic
FortiSandbox can process multiple files simultaneously since it has a VM pool to dispatch files to for sandboxing. The
time to process a file depends on the hardware and the number of sandbox VMs used to scan the file. It can take from 60
seconds to five minutes to process a file.
Device
In Device mode, you can configure your FortiGate, FortiWeb, FortiClient, FortiMail, FortiProxy, and FortiADC devices to
send files to FortiSandbox. For FortiGate, you can send all files for inspection. For FortiMail, you can send email
attachments or URLs in the email body to FortiSandbox for inspection, or just send the suspicious ones. When
FortiSandbox receives the files or URLs, they are executed and scanned within the VM modules. FortiSandbox sends
statistics back to the FortiGate, FortiWeb, and FortiMail. When integrated with FortiGate, supported protocols include:
HTTP, FTP, POP3, IMAP, SMTP, MAPI, IM, and their equivalent SSL encrypted versions.
A FortiSandbox system, either a standalone unit or in a cluster, has no limit on the number of
authorized devices and FortiClients. However, the concurrent connections of all client devices
is limited to 30000.
Use the Security Fabric > Device page to view, edit, and authorize devices.

Fortinet Inc.
Security Fabric
Devices such as FortiGate can query a file's verdict and retrieve detailed information from FortiSandbox. FortiGate can
also download malware and URL packages from FortiSandbox as complementary AV signatures and web filtering
blocklists. These packages contain detected malware signatures and their downloading URLs.
The default file size scanned and forwarded by FortiGate is 10MB and the maximum size depends on the FortiGate
memory size. To change the file size on the FortiGate side, use the following CLI commands:
config firewall profile-protocol-options
edit <name_str>
config http
set oversize-limit <size_int>
end
end
The profile-protocol-options setting controls the maximum file size that is AV scanned on the FortiGate. After a
virus scan verdict has been made (clean or suspicious), if the file size is less than the analytics-max-upload size, it
is sent to FortiSandbox using the Send All/Suspicious Only setting on the FortiGate.
For information on configuring the oversize limit for profile-protocol-options and analytics-max-upload,
see the FortiOS CLI Reference in the Fortinet Document Library.
In Security Fabric > Device, the following options are available:
Refresh Refresh display after applying search filters.
Device Filter Filter devices by entering part of device name or serial number.
Clear all removable filters Click the trash can icon to remove all filters.
This page displays the following:
Device Name Name of the device and the VDOM or protected email domain that send files to
FortiSandbox. For a device, it has the format of: Device Name. For a VDOM, it has the
format of: Device Name: VDOM Name. For a FortiMail protected domain, it has the
format: Device Name : Domain Name.
Serial The FortiGate, FortiWeb, FortiClient, FortiClient EMS, or FortiMail serial number.
Malicious, High, Medium, The number of malicious, high risk, medium risk, or low risk files submitted by the device
Low to FortiSandbox in the last seven days. FortiClient EMS displays the number of files
submitted to FortiSandbox by FortiClient endpoints that are managed by EMS.
Clean Number of clean files submitted by the device to FortiSandbox in the last seven days.
FortiClient EMS displays the number of clean files submitted to FortiSandbox by
FortiClient endpoints that are managed by EMS.
Others Number of other files submitted by the device to FortiSandbox in the last seven days.
FortiClient EMS displays the number of other rating files submitted to FortiSandbox by
FortiClient endpoints that are managed by EMS.
Mal Pkg Malware package version currently on the device.
URL Pkg URL package versions currently on the device.
Auth Shows if the device or VDOM/Protected Domain is authorized to submit files. Only
authorized device or VDOM/Protected Domain can submit files to FortiSandbox.

Fortinet Inc.
Security Fabric
Limit Shows if this device has a submission limit.
Status Status of the device. An icon shows that the device is up or connected, down, or
disconnected. If a device, its VDOM, or protected domain does not contact
FortiSandbox for more than 15 minutes, the status changes to disconnected.
Delete Click to delete the device, VDOM, or protect domain. When you delete a device, all its
VDOMs and protected domains are also deleted. If the device is FortiClient EMS, its
managed FortiClient endpoints are kept. If the device connects to FortiSandbox again, it
appears as a new device.
FortiSandbox uses a Fortinet proprietary traffic protocol (OFTP) to communicate with

connected devices. This is encrypted communication using TCP port 514.
Supported Devices
FortiSandbox supports the following devices:
FortiGate FortiSandbox can perform additional analysis on files that have been AV scanned by
FortiGate. You can configure FortiGate to send all files or only suspicious files passing
through the AV scan.
FortiGate can retrieve scan results and details from FortiSandbox, and also receive antivirus
and web filtering signatures to supplement the current signature database.
When FortiGate learns from FortiSandbox that a terminal is infected, the administrator can
push instruction for self-quarantine on a registered FortiClient host.
FortiMail You can configure FortiMail to send suspicious, high risk files and suspicious attachments to
FortiSandbox. FortiSandbox can perform additional analysis on files that have been scanned
by your FortiMail email gateway.
Suspicious email attachments include:
l Suspicious files detected by heuristic scan of the AV engine.
l Executable files and executable files embedded in archive files.
l Type 6 hashes (binary hashes) of spam email detected by FortiGuard AntiSpam service.
FortiMail can send suspicious URLs in the email body to FortiSandbox for URL scans and
then block suspicious emails based on the scan result.
FortiWeb You can use a file upload restriction policy to submit uploaded files to FortiSandbox for
evaluation. If FortiSandbox determines that the file is malicious, FortiWeb performs the
following tasks:
l Generate an attack log message that contains the result, for example, messages with
the Alert action.

l For 10 minutes after it receives the FortiSandbox results, take the action specified by the
file upload restriction policy. During this time, it does not re-submit the file to
FortiSandbox, for example, messages with the Alert_Deny action.

Fortinet Inc.
Security Fabric
FortiClient EMS You can configure a FortiSandbox IP address in an endpoint profile. FortiClient EMS
attempts to submit an authorization request to FortiSandbox. FortiSandbox administrators
can authorize it and set limitations about submission speed. Subsequently, all FortiClient
endpoints managed by FortiClient EMS are considered authorized by the same FortiSandbox
and follow the submission speed limit.
FortiClient FortiSandbox can accept files from FortiClient to perform additional analysis while FortiClient
holds the files until the scan results are received. FortiClient can also receive additional
antivirus signatures from FortiSandbox, generated from scan results, to supplement current
signatures.
FortiGate devices
You can add FortiSandbox as a Security Fabric device in FortiGate. For information on how to configure FortiGate to
send files to FortiSandbox, see the FortiGate guides in the Fortinet Document Library.
On FortiSandbox, go to Security Fabric > Device to see the FortiGate devices and VDOMs.
The communication protocol does not include a way for the FortiGate to notify FortiSandbox whether VDOMs are
enabled. When VDOMs are disabled on the FortiGate, the files from FortiGate are marked with vdom=root.
Since the FortiGate does not explicitly send a list of possible VDOMs to FortiSandbox,
FortiSandbox only knows about a VDOM after it receives a file associated with it. Each of the
devices VDOMs listed on this page are displayed after the first file is received from that
specific VDOM.
If VDOMs are enabled on FortiGate, you can select the checkbox to have new VDOMs inherit authorization based on the
device level setting. If the FortiGate authorization is disabled, all VDOMs under it will not be authorized even if
authorization is enabled for a VDOM.
To edit FortiGate settings in FortiSandbox:
1. On your FortiSandbox device, go to Security Fabric > Device.

This page lists all devices and VDOMs.
2. Click the FortiGate device name to open the Edit Device Settings page.
3. Edit the following settings and then click OK.
Device Status
Serial Number Device serial number.
Hostname FortiGate host name.
IP IP address of the FortiGate.
Status Status of the device.
Last Modified Date and time the FortiGate settings were last changed.
Last Seen Date and time the FortiGate last connected to FortiSandbox.
Permissions & Policy

Fortinet Inc.
Security Fabric
Authorized Enable to authorize the FortiGate device. If disabled, files sent from FortiGate are
dropped.
New VDOMs/Domains Enable to have new VDOMs inherit the authorization setting configured at the
Inherit Authorization device level.
Email Settings
Administrator Email Email address in Notifier email in FortiGate at Security Fabric > Settings > Sandbox
Inspection.
Send Notifications Enable to send notifications. When enabled, you receive email notifications when a
file from your environment is detected as potential malware. The email contains a
link to the scan job details page.
To receive notification emails, configure a mail server in System > Mail Server and
enable Send a notification email to the Device/Domain/VDOM email list when
Files/URLs with selected rating are detected. Otherwise, a warning icon displays.
Send PDF Reports Enable to send PDF reports of job details.

To receive reports and define report generation frequency, configure a mail server in
System > Mail Server and enable Send scheduled PDF report to
Device/Domain/VDOM email address. Otherwise, a warning icon displays.
To edit VDOM settings:

This page lists all devices and VDOMs.
2. Click the VDOM name to open the Edit Domain Settings page.
Device Status
Domain/VDOM Device VDOM name.
Hostname VDOM name in the format of Device-Name:VDOM-name.
IP IP address of the FortiGate.
Files Transmitted Number of files and URLs transmitted to FortiSandbox in the last seven days.
Last Modified Date and time the authorization status was changed.
Last Seen Date and time the FortiGate VDOM last connected to FortiSandbox.
Authorized Enable to authorize the FortiGate VDOM.
Submission Limitation Limit the VDOM submission speed. Select Unlimited or specify the number of
submissions per Hour or Day.
When the limit is reached, FortiSandbox sends a signal to FortiGate to stop file
submission to save resources on both devices.

Fortinet Inc.
Security Fabric
Email Settings
Email Enter the administrator email addresses for the VDOM, separated by commas.
Send Notifications Enable to send notifications when viruses or malware from this VDOM is detected.
Files/URLs with selected rating are detected. Otherwise, a warning icon displays.
Send PDF Reports Enable to send PDF reports of job details.

System > Mail Server and enable Send scheduled PDF report to
Device/Domain/VDOM email address. Otherwise, a warning icon displays.
Send Reach Limit Alert Enable to send an alert email to the VDOM email address when Submission
Email Limitation is reached.
FortiMail Devices
You can configure FortiMail to send suspicious files, URLs, and suspicious attachments to FortiSandbox for inspection
and analysis. FortiSandbox statistics for total detected and total clean are displayed in FortiMail.
If FortiMail sends protected domain information, the domain names and jobs counts from them are listed. For each
protected domain, you can set a submission limitation. If protected domain information is not available, such as files from
older versions of FortiMail or outgoing emails, jobs from them are grouped in the Unprotected domain name.
For information on how to configure FortiMail to send files to FortiSandbox, see the FortiMail Administration Guide in the
Fortinet Document Library.
To edit FortiMail Settings in FortiSandbox:

This page lists all devices and protected domains. Since FortiMail does not explicitly send a list of possible
protected domains to FortiSandbox, FortiSandbox only knows about a domain after it receives a file or URL.
Domains on this page are displayed after the first file or URL is received on that domain.
2. Click the FortiMail device name to open the Edit Device Settings page.
Device Status
Hostname FortiMail host name.
IP IP address of the FortiMail.
Last Modified Date and time the FortiMail settings were last changed.
Last Seen Date and time the FortiMail last connected to FortiSandbox.

Fortinet Inc.
Security Fabric
Authorized Enable to authorize the FortiMail device. If disabled, files sent from FortiMail are
dropped.
New VDOMs/Domains Enable to have new protected domains inherit the authorization setting configured at
Inherit Authorization the device level.
Email Settings
Administrator Email Email address in Notifier email in FortiMail.
Send Notifications Enable to send notifications. When enabled, you receive email notifications when a
file inside an email is detected as potential malware. The email contains a link to the
scan job details page.
enable Send a notification email to the Device/Domain/Vdom email list when
Files/URLs with selected rating are detected. Otherwise, a warning icon is displays.
Send PDF Reports Enable to send PDF reports of job detail.

System > Mail Server and enable Send scheduled PDF report about an individual
VDOM/Domain to its email address. Otherwise, a warning icon is displays.
To edit Domain settings:

2. Click the domain name.
Device Status
Domain/VDOM FQDN Protected domain name.
Hostname Domain/VDOM name in the format of FortiMail Device Name: Domain

name.
IP IP address of the FortiMail.
Files/URLs Transmitted Number of files and URLs sent to the domain in the last seven days.
Last Modified Date and time the authorization status was changed.
Last Seen Date and time last file/URL was sent to this domain.
Authorized Enable to authorize the FortiMail domain.
Submission Limitation Limit the protected domain submission speed. Select Unlimited or specify the
number of submissions per Hour or Day.
When the limit is reached, FortiSandbox rejects files and URLs sent to this domain.
Email Settings
Email Enter the administrator email addresses for the domain, separated by commas.

Fortinet Inc.
Security Fabric
Send Notifications Enable to send notifications when viruses or malware to this domain is detected.
Files/URLs with selected rating are detected. Otherwise, a warning icon is displays.
Send PDF Reports Enable to send PDF reports of jobs.

System > Mail Server and enable Send scheduled PDF report about an individual
VDOM/Domain to its email address. Otherwise, a warning icon is displays.
Send Reach Limit Alert Enable to send an alert email to the domain email address when Submission
Email Limitation is reached.
Upload suspicious attachments to FortiSandbox
For information on how to configure FortiMail to send files to FortiSandbox, see the FortiMail Administration Guide in
Fortinet Document Library.
Device and VDOM/Domain level notifications
If you enable Send notifications in the Edit Device Settings or Edit VDOM/Domain Settings page, you receive an email
every time a file from your environment is detected as potential malware.
Device and VDOM/Domain level PDF reports
If you enable Send PDF reports in Edit Device Settings or Edit VDOM/Domain Settings, you receive a PDF report by
email as defined in System > Mail Server. This FortiSandbox Summary Reports PDF lists statistics of scan jobs in the
time period in System > Mail Server and includes the following information:
l Scan Statistics: The number of files processed by FortiSandbox and a breakdown of files by rating.
l Scan Statistics by Type: The file type, rating, and event count.
l Scanning Activity: A table and graph listing the number of clean, suspicious, and malicious files processed by
FortiSandbox per day.
l Top Targeted Hosts: The top targeted hosts.
l Top Malware Files: The top malware programs detected by FortiSandbox.
l Top Infectious URLs: The top infectious URLs detected by FortiSandbox.
l Top Callback Domains: The top callback domains detected by FortiSandbox.
FortiWeb Devices
For information on how to configure FortiWeb to send files to FortiSandbox, see the FortiWeb Administration Guide in
the Fortinet Document Library.
FortiClient EMS Devices
For information on how to configure FortiClient EMS to send files to FortiSandbox, see the FortiClient EMS
Administration Guide in the Fortinet Document Library.

Fortinet Inc.
Security Fabric
To edit EMS settings in FortiSandbox:

2. Click the device name to open the Edit Device Settings page.
3. Edit the following and then click OK.
Device Status
Hostname EMS host name.
IP IP address of the EMS.
Last Modified Date and time the EMS settings were last changed.
Last Seen Date and time the EMS last connected to FortiSandbox.
Authorized Enable to authorize the EMS device. All FortiClient endpoints managed by
EMS inherit this authorization setting.
Submission Limitation Limit the submission speed of FortiClient endpoints managed by EMS. Select
Unlimited or specify the number of submissions per Hour or Day.
When the limit is reached, FortiSandbox sends a signal to FortiClient to stop file
FortiClient
FortiClient 5.4 and earlier versions can silently connect to FortiSandbox without the need to be authorized. You can de-
authorize a FortiClient host manually. If a FortiClient endpoint is managed by EMS, it follows the authorization status and
file submission speed setting of EMS. You can manually change these settings.
For information on how to configure FortiClient to send files to FortiSandbox, see the FortiClient Administration Guide in
the Fortinet Document Library.
To view connected FortiClient endpoints in FortiSandbox, go to Security Fabric > FortiClient.
Refresh Refresh display after applying search filters.
Device Filter Filter devices by entering part of device name or serial number.
Clear all removable filters Click the trash can icon to remove all filters.
FCT Serial The FortiClient serial number.
Hostname FortiClient host name.
User Current user logged into the FortiClient host, if available.

Fortinet Inc.
Security Fabric
IP Host IP Address.
Malicious, High, The number of malicious, high risk, medium risk, or low risk files submitted by FortiClient to
Medium, Low FortiSandbox in the last seven days.
Malicious files are not executed in the FortiSandbox VM module as the antivirus scanner has
already determined the file rating.
Clean Number of clean files submitted by the device to FortiSandbox in the last seven days.
Others Number of other files submitted by the device to FortiSandbox in the last seven days.
Mal Pkg Malware package version currently on the device.
Auth If the FortiClient is authorized, you can click the FortiClient serial number and modify its
authorization status.
Limit Shows if this device has a submission limit.
Status Status of the FortiClient host. An icon shows that the device is connected (up) or down.
Delete Click to delete the FortiClient. If the device connects to FortiSandbox again, it appears as a
new device.
To edit FortiClient settings in FortiSandbox:
1. On your FortiSandbox device, go to Security Fabric > FortiClient.

2. Click the device name to open the Edit FortiClient Settings page.
FortiClient Status
Hostname FortiClient host name.
IP IP address of the FortiClient.
Files Transmitted Number of files transmitted to FortiSandbox in the last seven days.
Last Seen Date and time that FortiClient last connected to FortiSandbox.
Authorized Enable to authorize the device.
Submission Limitation Limit the submission speed. Select Unlimited or specify the number of submissions
per Hour or Day.
When the limit is reached, FortiSandbox sends a signal to FortiClient to stop file

Fortinet Inc.
Security Fabric
Adapter
FortiSandbox uses adapters to connect to third-party products such as Carbon Black/Bit9 server, ICAP, and mail
gateway clients.
With an adapter, FortiSandbox can analyze files downloaded from the Carbon Black server to send notifications of file
verdict back to the server, or receive HTTP messages from an ICAP client and return a response to it.
FortiSandbox supports mail adapters to receive forwarded emails from an upstream email gateway and scan them.
FortiSandbox extracts email attachments and URLs in an email body and sends them to the job queue.
You can use the MTA adapter to inspect and quarantine suspicious emails. For more information, see Configure MTA
adapter on page 56 and the FortiSandbox user guide in the AWS marketplace.
The BCC adapter is for information only, it does not block emails.
FortiSandbox creates the ICAP, BCC, and MTA adapters which cannot be deleted. They are disabled by default.
Create New Create a new adapter.
Edit Edit an adapter.
Delete Delete an adapter.

You cannot delete the ICAP, BCC, or MTA adapter.
Test Connection If available, click this button to test the selected entry's connection. The banner at the
top displays the result.
Adapter Name Adapter name.
Vendor Name Vendor name.
Serial Serial number.
FQDN/IP FQDN/IP address.

This field is empty when for the ICAP, BCC, and MTA adapter.
Malicious File and URL count of Malicious rating from this adapter in the last seven days.
High File and URL count of High Risk rating from this adapter in the last seven days.
Medium File and URL count of Medium Risk rating from this adapter in the last seven days.
Low File and URL count of Low Risk rating from this adapter in the last seven days.
Clean File and URL count of Clean rating from this adapter in the last seven days.
Other File and URL count of Other rating from this adapter in the last seven days.
To create an adapter:
1. Go to Security Fabric > Adapter.

2. Click the Create New button from the toolbar.

Fortinet Inc.
Security Fabric
3. Configure the following and click OK.
Vendor Name Select Carbon Blaclk/Bit9.
Adapter Name Enter the adapter name.
Server FQDN/IP Enter the FQDN/IP address of the Carbon Black server.
Token Enter the token string. Authentication token is assigned by the Carbon Black or
ICAP server.
Timeout (seconds) Enter the timeout value.
Serial Auto-generated serial number for this adapter. It works as a device serial number to
denote file's input device.
After you create a Carbon Black adapter, FortiSandbox tries to communicate with the Carbon Black server. If the
connection and authentication is successful, the status column shows a green icon, otherwise it shows a red icon.
To configure the ICAP adapter:

2. Select the ICAP adapter and click Edit.
3. Enable the adapter.
4. Configure the Connection settings.
5. You can select the interface port that FortiSandbox listens to. The default is port1.
6. In the Methods section, you can enable Receive URL and Receive File and set the rating to block files and URLs.

Fortinet Inc.
Security Fabric
7. For faster response of a known virus before a file is put into the job queue, enable Realtime AV Scan.
8. Click Apply.
9. To enable file submission from the ICAP adapter to create log events:
a. Go to Scan Policy and Object > General Settings.
b. Under Enable log event of file submission, select ICAP.
c. Click OK.
10. To view ICAP adapter debug logs in run time, execute the following CLI command:
diagnose-debug adapter_icap
For more information about the diagnose-debug command, see the FortiSandbox CLI Reference.
To configure the BCC adapter:

2. Select the BCC adapter and click Edit.
4. Enable Parse URL to allow FortiSandbox to extract the first three URLs in an email.

Fortinet Inc.
Security Fabric
5. Configure the Connection settings.
6. Click Apply.
To troubleshoot communication problems with an adapter, use this CLI command:
diagnose-debug [adapter_cb | adapter_icap | adapter_bcc | adapter_mta_relay | adapter_mta_

mail]
Configure MTA adapter
The MTA adapter requires a contract.
To configure the MTA adapter:

2. Select the MTA adapter and click Edit.

Fortinet Inc.
Security Fabric

Fortinet Inc.
Security Fabric
4. Configure the following settings and then click Apply.
URL number to extract from Maximum number of URLs to be extracted from one email body.
email body
Tag For If the email scan result is malicious or suspicious, this text is prefixed to the
Suspicious/Malicious Mails email subject line. The next hop email server can act accordingly.
Email Scan Timeout Maximum time FortiSandbox waits for scan result. If there is no result after
(Minutes) timeout, the email is released to recipient.
Message Size Limit (mb) Maximum size of email to accept to scan.
Disk Usage Upper Limit(%) Maximum percentage disk space used before MTA stops scanning emails and
only routes emails.
Relay Emails for Domain Domain names of email server to be relayed from this FortiSandbox. When
Names FortiSandbox receives these emails and finishes scan, FortiSandbox relays
these emails if they are clean, or quarantines them if malicious.
Next Hop Mail Server Name IP address or domain name of email server to relay to for relayed emails.
Local Interface Select the local interface.
Local SMTP Port Specify the local SMTP port.
Quarantine emails whose Select the ratings of emails to quarantine.

content has the following
ratings
Send alert email to receivers When email is quarantined, send alert email as configured.
when email is quarantined
Email Sender The From field of alert email sent.
Email Subject Email subject line of alert email sent.
Email Content Template Text in alert email body.
To process quarantined emails:

If there are malicious and suspicious emails, the number of quarantined emails is displayed beside the MTA adapter
name.

Fortinet Inc.
Security Fabric
2. Click the Quarantined link to display the list of quarantined emails.
l To view job details, click the View Details icon.

l To download the job files as a zip file, click the Download Email File icon.
l To preview the original email, click the Preview Email icon.
l To release the quarantined email to recipient, select the emails and click the Release Email icon.
l To delete the quarantined email, select the emails and click the Delete Email icon.
Using MTA in HA-Cluster
In HA-Cluster, the MTA adapter is only available in the primary node.

Configuration is the same as on a standalone device. When the primary node receives MTA jobs, depending on
workload and VM association, it distributes the jobs to itself or worker nodes.
In a cluster, configure the Local Interface to the interface of the cluster IP address so that the
secondary can take over the configuration in a failover.
To view jobs in a cluster, go to HA-Cluster > Job Summary.

To view logs in the primary node, go to Log & Report > Events > Job Events.
To view logs in a worker node, go to Log & Report > Events > All Events.

Fortinet Inc.
Security Fabric
Configure Carbon Black/Bit9 Server
To be able to configure a Carbon Black (Bit9) server to work with FortiSandbox, you will need to login.
Submitting selected files to FortiSandbox
1. Go to Assets > Computers. All computers that are managed by the server will be listed.
2. In the left panel, select Files on Computers. All files will be listed on this computer.
3. Select one or more files.

4. Click the Action button > Analyze with FortiSandbox. The files will be submitted to FortiSandbox for analysis.

Fortinet Inc.
Security Fabric
Creating an event rule to automatically submit files to FortiSandbox
1. Go to Rules > Event Rules.

2. Click the Create Rule button.
3. Configure the settings.
How to view analysis results
Go to Reports > External Notifications. All files analyzed by FortiSandbox will be listed.

Fortinet Inc.
Security Fabric
Configure ICAP adapter
FortiSandbox can work as an ICAP server with proxy secure gateway devices (ProxySG) that supports ICAP. The
ProxySG will serve as an ICAP client to FortiSandbox. To configure an ICAP adapter, first you will use the CLI to
configure the client, and then you will use FortiSandbox GUI to configure the server.
Request and response
When an ICAP client sends a HTTP request to FortiSandbox, FortiSandbox extracts the URL and checks if a verdict is
available.
l If the verdict is not a user selected blocking rating or is not available, a 200 return code is sent back to client so the
request can move on the client side.
l If the verdict is user selected blocking rating, a 403 return code along with a block page is sent back to the client.
l If no verdict is available, the URL will be put into the Job Queue for a scan. URL scan flow will apply.
When an ICAP client sends a HTTP response to FortiSandbox, FortiSandbox extracts the file from it and checks if
verdicts are available.
l If a verdict is not a user selected blocking rating, a 200 return code is sent back to the client so the response can be
delivered to the endpoint host.
l If a verdict is user selected blocking rating, a 403 return code along with a block page is sent back to the client.
l If the user enables Realtime AV Scan, the file will be scanned by the AV Scanner. If the file is a known virus, a 403
return code along with a blocked page is sent back to the client.
l If no verdict is available, these files will be put into the Job Queue for a scan. File scan flow will apply.
When ICAP client sends a preview request, FortiSandbox returns a 204 return code, which means it is not supported.
The ICAP client only supports PUT, POST and GET methods.
To configure ICAP client:
The following configuration is for a SQUID 4.x to reach the FortiSandbox. You should add this configuration to the end of
the squid.conf file.
cache deny all
icap_enable on
icap_send_client_ip on
icap_send_client_username on
icap_client_username_header X-Authenticated-User
icap_preview_enable off
icap_persistent_connections off
icap_service svcBlocker1 reqmod_precache icap://fortisandbox_ip:port_number/reqmod bypass=0
ipv6=off
adaptation_access svcBlocker1 allow all
icap_service svcLogger1 respmod_precache icap://fortisandbox_ip:port_number/respmod
routing=on ipv6=off
adaptation_access svcLogger1 allow all
### add the following lines to support ssl ###

Fortinet Inc.
Security Fabric
#icap_service svcBlocker2 reqmod_precache icaps://sandbox_ip:ssl_port_number/reqmod bypass=1

tls-flags=DONT_VERIFY_PEER
#adaptation_access svcBlocker2 allow all
#icap_service svcLogger2 respmod_precache icaps://sandbox_ip:ssl_port_number/respmod
bypass=1 tls-flags=DONT_VERIFY_PEER
#adaptation_access svcLogger2 allow all
To configure FortiSandbox as an ICAP server:
1. In the FortiSandbox GUI, go to Security Fabric > Adapter.

2. Select the ICAP adapter and click Edit.
3. Enable the ICAP adapter.
4. Under Connection, configure the following settings, and then click Apply.
Port The port the ICAP server listens on. Default is 1344.
Interface The interface the ICAP server listens on.

For a cluster, we recommend specifying the interface corresponding to the
cluster IP interface (for example, port1 HA).
SSL support Enable to allow SSL traffic.
SSL port The port the ICAP server listens on for SSL traffic. Default is 11344.
Receive URL Enable to allow the ICAP server to receive URLs, and then select the risk level
to be blocked. Options are Low Risk, Medium Risk, and High Risk.
Receive File Enable to allow the ICAP server to receive files, and then select the risk level
to be blocked. Options are Low Risk, Medium Risk, and High Risk.
Realtime AV Scan Enable to allow real-time file scanning.
Configure FortiMail to integrate with FortiSandbox BCC Adapter
FortiSandbox has a BCC adapter to receive and scan forwarded emails from upstream MTA servers. FortiSandbox
extracts attachment files and URLs from the email body and sends them to the job queue.
This feature is for information only, like sniffer mode. It will not block any email.

Fortinet Inc.
Security Fabric
To configure the FortiSandbox:
1. Enable the BCC adapter:

a. Go to Security Fabric > Adapter in the navigation tree.
b. Select BCC and click Edit in the toolbar. The BCC adapter is disabled by default.
c. Enable the BCC adapter.
d. Enable Parse URL to allow the FortiSandbox to extract the first three URLs in an email.
e. Enter the SMTP port that the FortiSandbox listens on to receive emails. The default port is 25.
f. Select the interface that the FortiSandbox listens on. The default is port1.
g. Click Apply.
2. Enable file submission from the BCC adapter to create log events:
a. Go to Scan Policy and Object > General Settings.
b. Under Enable log event of file submission, select BCC Adapter.
c. Click OK.
3. View BCC adapter debug logs in run time, execute the following CLI command:
diagnose-debug adapter_bcc
For more information about the diagnose-debug command, see the FortiSandbox CLI Reference.
To configure the upstream MTA (in this case a FortiMail device):
1. Go to Profile > AntiSpam and create a new AntiSpam profile:

a. Enable Apply default action without scan upon policy match.
b. Configure BCC as the default action.
c. Edit the default action: enable BCC, and add a BCC address, such as [email protected].

Fortinet Inc.
Security Fabric
2. Go to Policy > Recipient Policy:

a. Select the domain for forwarding emails to the FortiSandbox, and apply the new AntiSpam profile.
b. Add a new inbound policy, select the domain for forwarding emails to the FortiSandbox, and apply the new
AntiSpam profile.
c. Add a new outbound policy, select the domain for forwarding emails to the FortiSandbox, and apply the new
AntiSpam profile.
3. Go to Policy > Access Control:

a. On the Delivery tab, add a TLS policy with a recipient pattern matching the previously added BCC address (in
this example: *@fsabcctest.com).

Fortinet Inc.
Security Fabric
b. Set TLS Profile as none or Preferred.
4. For the DNS server that your upstream mail server is accessing, add an MX record for the BCC email domain to
resolve the FortiSandbox device's IP address. In the above example, the email domain is fsabcctest.com and the IP
address is that of the port that is receiving the email.
Network Share
FortiSandbox can scan files stored on a network share and optionally quarantine any malicious files. Go to Security
Fabric > Network Share to view and configure network share information.
In an HA-Cluster, the Network Share page is only shown on the HA primary device, therefore
you can only edit the page on the primary node. After an HA failover, all configurations of
network shares will be synced to the new primary device.
Network share scans can be scheduled or run on-demand, and connectivity with the network share can be tested.
After v3.2.0 the scheduled or on-demand scan job stops when the system firmware reboots.
The scheduled scan will run on schedule after the reboot. The on-demand scan will need to be
run manually if required.
Create New Create a new network share.
Edit Edit the selected entry.
Clone Clone the selected entry. Only the Network Share Name is different. All other settings
are the same as the original.

Fortinet Inc.
Security Fabric
Delete Delete the selected entry.
Scan Now Scan the selected entry.
Scan Details View the selected entry's scheduled scan entries.
Test Connection Test the selected entry's connection. The banner at the top displays the result.
Name Name of the network share.
Scan Scheduled The scan scheduled status. Scheduled network scans are done in parallel.
Type Mount type.
Share Path File share path.
Quarantine Displays if quarantine is enabled.
Enabled Displays if the network share is enabled. A disabled network share does not run its
scheduled scans.
Status Displays if the network share status is accessible or down.
To create a new network share:
1. Go to Security Fabric > Network Share.

2. Click Create New.
3. Configure the following options and click OK.
Enabled Select to enable network share configuration. If network share is not enabled,
its scheduled scan will not run.
Mount Type Select the mount type. The following options are available:
l CIFS (SMB v1.0, v2.0, v2.1, v3.0).
For Microsoft DFS, only SMB v1.0 is supported.

l NFSv2.
l NFSv3.
l NFSv4.
l Azure File Share. See Cloud Storage on page 89.
l AWS S3. See Cloud Storage on page 89.
For domain-based DFS namespace, ensure the domain name can be

resolved with the system Primary DNS server.
Network Share Name Network share name.
Server Name/IP Server FQDN or IP address.
Share Path File share path in the format /path1/path2.
Scan Files Of Specified Include or exclude files which match a file name pattern.
Pattern
File Name Pattern File name pattern.

Fortinet Inc.
Security Fabric
Username, Password, Username and password. For domain users, use the format:
Confirm Password domain_name\user_name
Or
user_name@full_domain_name
Scan Job Priority When multiple network share scans run at the same time, higher priority scans
get more scan power.
Keep A Copy Of Original File Keep a copy of the original file on FortiSandbox.
On FortiSandbox
Skip Sandboxing for the To improve scan speed, you can skip sandboxing scan on existing files (if
same unchanged files applicable) and only do sandboxing scan on new files. Existing files are only
scanned by AntiVirus engine and Community Cloud query.
Enable Quarantine of Quarantine files with a Malicious rating in the selected location.
Malicious Files Quarantined files are put in a folder with the name of the Job ID and each file is
renamed with the Job ID for that file and a meta file with more information.
Enable Quarantine of Quarantine suspicious files with a High Risk rating in the selected location.
Suspicious - High Risk files Quarantined files are put in a folder with the name of the Job ID and each file is
Enable Quarantine of Quarantine suspicious files with a Medium Risk rating in the selected location.
Suspicious - Medium Risk Quarantined files are put in a folder with the name of the Job ID and each file is
files renamed with the Job ID for that file and a meta file with more information.
Enable Quarantine of Quarantine suspicious files with a Low Risk rating in the selected location.
Suspicious - Low Risk files Quarantined files are put in a folder with the name of the Job ID and each file is
Enable Quarantine of Other Quarantine suspicious files with a Other rating in the selected location.
rating files Quarantined files are put in a folder with the name of the Job ID and each file is
Enable copying or moving Copy or move files with a Clean rating to another location.
clean files to a sanitized By default, a new folder is created for each scheduled scan job in the sanitized
location location and all clean files are copied into it with the original folder structure. To
save space, uncheck Keep a complete copy of clean files for every scheduled
scan so that files of the same path have only one copy in the sanitized location.
Enable Scheduled Scan Enable scheduled scan and specify the schedule type.
Description Optional description for the network share entry.
Send notification email after Email a summary report for each network share scan to the specified users.
each scan
When a file is moved, to leave a copy in its original location, go to the Quarantine edit page
or sanitized share and select the Keep Original File At Current Location.

Fortinet Inc.
Security Fabric
If FortiSandbox goes into network share conserve mode, it stops processing files and creates
a critical level system log entry to alert you.
To run a network share scan immediately:

2. Select a share.
3. Click Scan Now to immediately run the scan.
To test network share connectivity:

2. Select a share.
3. Click Test Connection to test connectivity with the network share.
Scan Details
The Scan Details page shows scheduled scans for the selected network share. To open the page, select a network
share, then select Scan Details from the toolbar.
The following information is shown:
Back Go back to the network share page.
Refresh Refresh the scans page.
Delete Delete the selected scan.
Total The total number of finished scanned jobs.
Start The start time of the scan.
End The end time of the scan.
Finished Percentage of files that finished the scan. Click on the number to show details.
Malicious The number of Malicious files discovered. Click on the number to show detected
Malicious rating files. The number of quarantined files are also displayed.
Suspicious The number of Suspicious files discovered, divided in High Risk, Medium Risk
and Low Risk columns. Click on the number to show detected Suspicious rating
files. The number of quarantined files are also displayed.
Clean The number of Clean files detected. Click on the number to show detected Clean
rating files.
Others The number of files that do not finish scanning for various reasons. Click on the
number to show them. The number of quarantined files are also displayed.
When jobs are displayed after clicking links on numbers, clicking the Job Detail button will display the details. If the
detailed job information has been deleted according to the settings in the Scan Profile > General page, the job details will
not be displayed.

Fortinet Inc.
Security Fabric
Quarantine
Go to Security Fabric > Quarantine to view the quarantine information.

Create New Select to create a new quarantine location.
Edit Select an entry from the list and then select Edit in the toolbar to edit the entry
selected. When editing an entry you can select to test connectivity to ensure that
the quarantine location is accessible.
Delete Select an entry from the list and then select Delete in the toolbar to remove the
entry selected.
Test Connection Select an entry from the list and then select Test Connection in the toolbar to test
the connection. The result will show in the top message panel and will disappear
after a few seconds.
Name The name of the quarantine location.
Type The mount type.
Share Path The file share path.
Enabled Displays if the quarantine location is enabled.
Status Displays the quarantine access status. One of the following states:
l Quarantine is Accessible
l Quarantine Down
To create a new quarantine entry:
1. Go to Security Fabric > Quarantine.


Fortinet Inc.
Security Fabric
3. Configure the following options:
Enabled Select to enable quarantine location.
Quarantine Name Enter the quarantine name.
Mount Type Select the mount type from the dropdown list. The following options are
available:
l CIFS (SMB v1.0, v2.0, v2.1 and v3.0)
l NFSv2
l NFSv3
l NFSv4
l Azure File Share (See Cloud Storage on page 89)
l AWS S3 See (Cloud Storage on page 89)
Server Name/IP Enter the server fully qualified domain name (FQDN) or IP address.
Share Path Enter the file share path. In the format /path1/path2.
Username Enter a user name. For a domain user, use the format:
domain_name\user_name
Or
user_name@full_domain_name
The user should have Write privileges for the remote networ
k share folder.
Password Enter the password.
Confirm Password Enter the password a second time for verification.
Keep Original File At Current Select to keep the original file at the current location when a file is quarantined
Location from a network share. By default, the original file is kept at its current location
when being moved.
Description Enter an optional description for the quarantine location entry.
4. Select OK to save the entry.
To edit a quarantine:

2. Select a quarantine.
3. Click the Edit button from the toolbar.
4. Make the necessary changes.
5. Click OK to save the entry.
To delete a quarantine:

2. Select a quarantine.

Fortinet Inc.
Security Fabric
3. Click the Delete button from the toolbar.

4. Click Yes I'm sure button from the Are you sure confirmation box.
Sniffer
Sniffer mode relies on inputs from spanned switch ports. It is the most suitable infrastructure for adding protection
capabilities to existing threat protection systems from various vendors.
Sniffer mode enables you to configure your FortiSandbox to sniff all traffic on specified interfaces. When FortiSandbox
receives files, they are executed and scanned within the VM modules. Sniffer mode supports these protocols: HTTP,
FTP, POP3, IMAP, SMTP, SMB, DNS and raw TCP. To enable and configure sniffer settings, go to Security Fabric >
Sniffer.
You can sniff multiple interfaces. For example, when FortiSandbox is deployed with a network tap device, you can sniff
both the incoming and outgoing traffic on separate FortiSandbox interfaces.
FortiSandbox reserves port1 for device management and port3 for scanned files to access the Internet. You cannot use
these ports as a sniffed interface: port1, the admin port, and the port used for cluster internal communication.

Fortinet Inc.
Security Fabric
Configure the following settings:
Enable file based detection Select the checkbox to enable file based detection.
Enable network alert detection Select the checkbox to enable network alerts detection. This feature detects
sniffed live traffic for connections to botnet servers and intrusion attacks and
visited suspicious web sites with Fortinet IPS and Web Filtering technologies.
Alerts can be viewed in the Network Alerts page.

Fortinet Inc.
Security Fabric
For URL visits, certain categories can be treated as benign in Scan Policy and
Object > Web Category.
Keep incomplete Keep files without completed TCP sessions. Select the checkbox to keep
files incomplete files. Sometimes incomplete files can be useful to detect known
viruses.
Enable Conserve When conserve mode is enabled, the sniffer might enter conserve mode if it is too
mode busy, such as when there are too many jobs in the pending queue (250K), sniffed
traffic exceeds optimal throughput, or HDD/RAM disk usage is too high.
In conserve mode, the sniffer only extracts executable (.exe) and MS Office files.
Optimal traffic throughput:
l FSA-2000E: 4 Gbps
l FSA-3000E: 8 Gbps
l FSA-VM00: 1Gbps
Max file size The maximum size of files captured by sniffer. Enter a value in the text box. The
default value is 2048kB and the maximum file size is 200000kB.
Files that exceed the maximum file size are not sent to FortiSandbox.
Sniffed Interfaces Select the interface to monitor.
Service Types Select the traffic protocol that the sniffer will work on. Options include: FTP,
HTTP, IMAP, POP3, SMB, OTHER and SMTP.
The OTHER service type is for raw TCP protocol traffic.
File Types Select the file types to extract from traffic. When All is checked. all files in the
traffic will be extracted. Users can also add extra file extensions by putting it in File
Types field and clicking Add > OK. The user can delete it later by clicking the
Trash can icon beside it and clicking OK.
When URLs in Email type is selected, URLs embedded inside Email body will be
extracted and scanned as WEBLink type. User can define the number of URLs to
extract for each Email, from 1 to 5.
When an interface is used in sniffer mode, it will lose its IP address. The interface settings
cannot be changed.
FortiAI
FortiSandbox can use FortiAI as one method to generate verdicts. If FortiAI rates a file as clean, and all other methods
gives that file a clean verdict, then FortiSandbox will not go into VM scan. If FortiAI rates a file as malicious or high risk,
then FortiSandbox will also rate it as malicious or high risk. For all other FortiAI ratings, FortiSandbox follows the regular
scan flow and give a final verdict after using all methods including VM scan.

Fortinet Inc.
Security Fabric
Prerequisites
l FortiAI server is installed and licensed.

l FortiAI is higher than v1.5.0 build 0104.
l You have the token from FortiAI System > Administrator > Edit > API Key.
To configure FortiAI as a verdict method:
1. Go to Security Fabric > FortiAI.

2. Click Enable.
3. Configure the following options.
Server IP IP address of FortiAI server.
Token The token from FortiAI System > Administrator > Edit > API Key.
Rating Timeout (Seconds) The maximum time to wait for FortiAI to give a verdict. If a file does not get a
verdict from FortiAI by this time, the file goes into normal scan flow.
Uploading Timeout The maximum time to upload a file to FortiAI. If a file does not upload to FortiAI
(Seconds) by this time, the file goes into normal scan flow.
Maximum File Size (KB) The maximum file size to upload to FortiAI. Oversize files are not sent to
FortiAI, they continue with regular scan flow.
4. Go to Scan Policy and Object > Scan Profile > Pre-Filter.

5. Enable FortiAI entrust and click Apply.

Fortinet Inc.
Scan Job
Job Queue
In this page, users can view the current pending job number, average scan time, and arrival rate of each job queue. The
associated VM is also displayed for each queue. The user can click the VM name to go to the Scan Profile page and
change its settings.
Users can use this page's information to ensure each Job Queue is not piling up with too many jobs. If there are a lot of
jobs pending in the Job Queue, the user can try to associate it with less VM types and/or allocate more clone numbers to
its associated VM types.
To refresh the data, click the Job Queue menu again or the Refresh button on the top of the web site.
Chart icon Click the Chart icon beside the VM Type to display the VM's Usage Chart.
Trash icon Click the Trash icon beside the Pending Job Number purges the job queue.
Prioritize Click the Prioritize button takes you to the Job Queue Priority List page where you can
adjust the list.
Input Source The type of Input Source. Input source types can be the following values:
l On-Demand
l File RPC
l Device
l Sniffer
l Adapter
l Network Share
l URL On-Demand
l URL RPC
l URL Device

Fortinet Inc.
Scan Job
l URL Adapter
File Type File types can be one of the following values:

l Executables /DLL/VBS/BAT/PS1/JAR/MSI/WSF files
l Microsoft Office files (Word, Excel, Powerpoint etc)
l Adobe Flash files
l Archive files (extensions: .7z, xz, .bz2, .gz, .tar, .zip, .Z, .kgb, .ace, etc.)
l PDF files
l Static Web files
l Android files
l MACOSX files
l URL detection
l User defined extensions
l Job Queue Assignment Pending files (files received from input sources and not yet
processed)
l Non Sandboxed files (files that do not enter the Sandboxing scan step according to
the current Scan Profile settings. If the Scan Profile settings are changed, they may
enter the Sandboxing scan step eventually.)
Queued # Current pending job number.

A Trash Can appears beside the pending job number. Clicking on the Trash Can icon
purges the job queue.
Select the icon next to the Non Sandboxing files Input Source to expand the selection to
view and purge non-sandboxing files separately.
Ave Scan Time in Last 24 Average scan time of one file in the last 24 hours, in seconds.
hrs (s)
Expected Finish Time The expected time when the pending jobs will finish.
Arrival Rate (Last 1 hr) Files put in the Job Queue in the last hour.
VM Type (Clone #) The VM type with its clone number.

A Chart icon appears beside the VM Type (Clone#). If you click on the Chart icon, the
VM's usage chart appears. This chart shows a rough percentage of used clones of this
VM type across time. If the usage percentage is consistently at a high level across time,
the user should consider allocating more clone numbers to it.
VM Jobs
Go to Scan Job > VM Jobs to view files currently scanned inside the VM. The page displays the file name and progress.
To view a screenshot of the running scan, click the VM Screenshot button and then the PNG Link button.
If the scan allows VM interaction, click the VM Interact icon to interact with the scan. To stop an interactive scan, click the
trash icon.
To take snapshots of scans or initiate interactions with the VM, your admin profile must have
Read/Write privilege for All On-Demand Scan Interactions.

Fortinet Inc.
Scan Job
File Job Search
To view all files and search files, go to Scan Job > File Job Search. You can apply search filters to drill down the
information displayed. Filenames can also be searched based on name patterns, and a snapshot report can be created
for all search results.
If the device is the primary node of a cluster, all jobs processed by the cluster are available to be searched. If the device
is a worker node of a cluster, only jobs processed by this device are available to be searched.
Search Field Enter the detection time frame and click to add additional search filters for Device,
File MD5, Filename, File SHA1, File SHA256, Job ID, Malware, Rating, Service,
Source, User, Device, Infected OS, Rated by, Submit User, Submit Filename,
Suspicious Type, or Scan Unit. When the search criteria is a Filename, click the =
sign to toggle between the exact and pattern search.
Time Period Select a time period to apply to the search.
Export to Report Select to open the Report Generator dialog box. Select to generate a PDF or CSV
report. You can wait until the report is ready to view, or navigate away and find the
report later in Log & Report > Report Center page.
Customize Click the Customize icon to customize the Job View settings page. For more
information, see Job View Settings on page 166.
Action
View Details Click the View Details icon to view file information. The information displayed in
Archived File The icon displays that the file as an archived file.
FortiGuard The icon displays that the file is rated by user's overridden verdict or FortiGuard
Advanced Static advanced static scan.
Scan
File Inside Archive The icon displays that the file is a file extracted from an archive file.
Rescan Job The icon displays that the job is Malicious from an AV Rescan or a rescan of the
Malicious file.
Video Click the Video button to play the video of the scan. Scan videos are available in
On-Demand scans if the user has the privilege.
Perform Rescan Click the icon to rescan the entry. In the Rescan Configuration dialog box, you can
skip Static Scan, AV Scan, Cloud Query, and Sandboxing.
Click OK to continue. This feature is only available for files with a Malicious rating
and the suspicious jobs detected by Static Scan, AV Scan, Cloud Query and the
yara engine. The rescan job is in Scan Job > File On-Demand.

Fortinet Inc.
Scan Job
The displayed columns are determined by settings defined in System > Job View Settings > File Detection Columns
page. For more information, see Job View Settings on page 166.
URL Job Search
To view all URL scan jobs and search URLs, go to Scan Job > URL Job Search. You can apply search filters to drill down
the information displayed. URLs can be searched based on different criteria, and a snapshot report can be created for all
search results.
If the device is the primary node of a cluster, all jobs processed by the cluster are available to be searched. If the device
is a worker node of a cluster, only jobs processed by this device are available to be searched.
Search Field Enter the detection time frame and click to add additional search filters for
Destination, Device, Infected OS Job ID, Job Status, Rated By, Rating, Scan Unit,
Submit User, Submitted Filename and URL. When the search criteria is
Submitted Filename, click the = sign to toggle between the exact and pattern
search.
Time Period Select a time period to apply to the search.
Export to Report Select to open the Report Generator dialog box. Select to generate a PDF or CSV
report. During generation, do not close the dialog box or navigate away from the
page. You can wait till the report is ready to view, or navigate away and find the
report later in Log & Report > Report Center page.
Customize Click the Customize icon to customize the Job View settings page. For more
information, see Job View Settings on page 166.
Action
View Details Click the View Details icon to view file information. The information displayed in

Fortinet Inc.
Scan Job
FortiGuard The icon displays that the URL is rated by user's overridden verdict, or FortiGuard
Advanced Static advanced static scan
Scan
Rescan Job The icon displays that the job is a customized rescan job of a Malicious URL.
Video Click on the Video button to play the video of the scan job. Scan videos are
available in On-Demand scans if user has the privilege.
Archive File The icon displays that the URL is from a file from an On-Demand scan
File Downloading The icon displays that the URL is from a downloading URL, and its payload is also
URL scanned as a file scan job.
Perform Rescan Click the icon to rescan the suspicious or malicious entry except suspicious files
rated by the VM. In the Rescan Configuration dialog box, you can customize the
new scan's depth and timeout value. You can also force the URL to do
Sandboxing scan even if was detected in former steps of the allowlist and blocklist
check or stopped from entering VM by a Sandboxing-prefilter setting.
Click OK to continue. The rescan job is in Scan Job > URL On-Demand.
The following information is displayed by default:
Detection The date and time that the file was detected by FortiSandbox.
URL Displays the URL.
Rating The URL rating. The rating can be one or more of the following:
Clean, Low Risk, Medium Risk, High Risk, Malicious, or Unknown.
Click the column header to sort the table by this column.
Submitted Filename The submitted filename associated with the URL. Click the column
header to sort the table by this column.
If the URL is from the body of an Email, and submitted by FortiMail,
the Email's session ID is used as the Submitted Filename.
Submit User The user that submitted the URL to be scanned. Click the column
header to sort the table by this column.
Infected OS The OS version of the FortiSandbox VM that was used to make the
Suspicious verdict
The displayed columns are determined by settings defined in System > Job View Settings > URL Detection Columns
Overridden Verdicts
The Overridden Verdicts page displays jobs that you have manually marked as False Positive or False Negative. Job
IDs, Comment, Job Finish Time, and the time that you manually marked the verdict will be displayed. If the job's detailed

Fortinet Inc.
Scan Job
information is still available, you can click the Job ID to display it.
You can easily delete a FP/FN verdict on this page by selecting an entry and clicking the Delete button.
File On-Demand
To view on-demand files and submit new files to be sandboxed, go to Scan Job > File On-Demand. You can drill down
for details and apply search filters. You can select to create a PDF or CSV format report for on-demand files.
Use File On-Demand to upload different file types directly to FortiSandbox. You can then view the results and decide
whether to install the file on your network.
FortiSandbox has a rescan feature. When a Suspicious or Malicious file is detected, you can click the ReScan icon to
rescan the file. This is useful when you want to understand the file's behavior when run on the Microsoft Windows host.
You can force the file to do Sandboxing scan even if was detected in former steps of Static Scan, AV Scan, Cloud Query,
or stopped from entering VM by Sandboxing-prefilter setting. All rescanned jobs are listed on the File On-Demand page.
You can select VM types to do the sandboxing by overwriting what is defined in the Scan Profile. When you select
MACOSX or WindowsCloud, the file is uploaded to the cloud to be scanned. For password protected archive files or
Microsoft Office files, write down all possible passwords. The default password list in the Scan Policy and Object >
General Settings page is also used to extract the archive files.
All files submitted through the JSON API are treated as On-Demand files. Their results is also listed on this page.
File On-Demand page - level 1
Submit File Click the button to submit a new file. You can upload a regular or archived file.
Six levels of file compression is supported. All files in the archive will be treated as
a single file.
Show Rescan Job Jobs generated from manual rescan can be shown/hidden by this option.
Add Search Filter Click the search filter field to add search filters. Click the cancel icon to the left of
the search filter to remove the specific filter. Click the clear all filters icon in the
search filter field to clear all filters.

Fortinet Inc.
Scan Job
When the search filter is Filename, select the equal icon to toggle between exact
search and pattern search.
Clear all removable filters Click the trash can icon to clear all removable filters.
Export Data Click the Export Data button to create a PDF or CSV snapshot report. The time
period of included jobs in the report depends on the selection of Time Period
dropdown. You can wait until the report is ready to view, or navigate away and find
the report later in Log & Report > Report Center.
View Jobs Click the icon to view the scan jobs associated with the entry. You can view
detailed information for files scanned. If the file is an archive file, all files in the
archive are displayed in this page.
Submission Time The date and time that the file was submitted to FortiSandbox. Use the column filter to
sort the entries in ascending or descending order.
Submitted Filename The file name.
Submitted By The name of the administrator that submitted the file. Use the column filter to sort the
entries in ascending or descending order.
Rating Hover over the icon to view the file rating. The rating can be one or more of the
following: Clean, Low Risk, Medium Risk, High Risk, Malicious, or Other. For archive
files, the possible ratings of all files in the archive are displayed.
During the file scan, the rating is displayed as N/A. If a scan times out or is terminated by
the system, the file will have an Other rating.
Status The scan status can be Queued, In-Process, or Done.
File Count The number of files associated with the entry. It is in the format of (finished file count)/
(total files of this submission) when the scan is In-Progress. When the scan is done, it
will display the total number of files in this submission.
Comments The comments user enters when submitting the file.
Rescan Job This icon indicates that this file is a rescanned version of another file.
Archive Submission This icon indicates that an archived file has been submitted for scanning.
After a file is submitted, the file might not be visible immediately until the file, or any file, inside
an archive file is put into a job queue. In a cluster setting, the file will not be visible until the file
is put into a worker node's job queue.

Fortinet Inc.
Scan Job
To view the scan job(s) associated with the entry:
1. Click the View Jobs icon or double click on the row. The view jobs page is displayed.
In this page you can view detailed information for files scanned. If the file is an archive file,
all files in the archive are displayed in this page.
2. This page displays the following information and options:
Back Click the Back button to return to the On-Demand page.
Add Search Filter Click the search filter field to add search filters. Click the Cancel icon to the left of the
search filter to remove the specific filter.
When the search filter is Filename, select the Equal icon to toggle between exact search
and pattern search.
View Details Click the View Details icon to view file information. The information displayed in the view
details page is dependent on the file type and risk level.
Scan Video When the scan is submitted, if Record scan process in video is selected, a video icon is
displayed. Clicking it will allow the user to select one VM type in which the scan is done
and recorded. Select the VM type to play the video or save it to a local hard disk.
The order of displayed columns is determined by the settings defined in the System > Job
View Settings > File Detection Columns page. For more information, see Job View
Settings on page 166.
3. Click the View Details icon to view file details. The View Details page will open a new tab. For information on the
View Details page, see Appendix A: Job Details page reference on page 207.
4. Click the parent job ID icon to view rescan file details.
If the parent job is an archive file, the childrens' file names are included in the Archive Files dropdown list. Select a
child's file name to view its detail.
5. Close the tab to exit the View Details page.
To create a snapshot report for all on-demand files:

3. Click the Export Data button in the toolbar, opening the Report Generator window.
4. Select PDF or CSV.
You can wait until the report is ready to view, or navigate away and find the report later in Log & Report > Report
Center.
6. Click the Close icon or the Cancel button to quit the report generator.

Fortinet Inc.
Scan Job
in the report.
To submit a file to FortiSandbox:
1. Click the Submit File button from the toolbar.

2. You can configure the following:
Select a File Click the Browse button and locate the sample file or archived sample file on
your management computer.
Possible password(s) for List all possible passwords to extract password protected archive file, or open
archive/office file password protected Microsoft Office file. One password per line. Default
password list set in the Scan Policy and Object > General Settings page will
also be used to extract the archive files.
Comments Optional comments for future reference.
Force to scan the file inside Enable to select advanced options.

VM
Follow VM Association If the sandboxing step is not skipped, the file will be sent to its associated VMs
Settings in Scan Profile defined in Scan Profile.
Force to Scan Inside the Overwrite VM association settings in Scan Profile by selecting one or more of
Following VMs the enabled VMs.
Allow Interaction Select the Allow Interaction checkbox to interact with the Windows VM. For
more information, see To use the Allow Interaction feature: on page 84.
Record scan process in Select to enable video recording. After scan finishes, a video icon will show in
video if VMs involve the File On-Demand second level detail page. Clicking it will trigger a
download or play the video.
Add sample to threat If result matches malware package requirement, add scan result to threat
package package.
Enable AI Use AI engine to scan the file.
3. Click the Submit button. A confirmation dialog box will be displayed. Click OK to continue. The file will be uploaded
to FortiSandbox for inspection.
4. Click the Close button to exit.
The file will be listed in the On-Demand page. Once FortiSandbox has completed its analysis, you can select to view
the file details.
To use the Allow Interaction feature:
1. Go to Scan Job > File On-Demand and click Submit File in the toolbar.
2. In the Submit New File window, enable Force to scan the file inside VM and check the Allow Interaction checkbox.
When selected, only one VM can be specified.
3. Click Submit.

Fortinet Inc.
Scan Job
4. Go to the Scan Job > VM Jobs page, the job will be launched when a clone of a selected VM is available.
There are two ways to interact with the windows VM:

1. Use a VNC client and connect to fsa_ip:port. The port number can be found in the Interaction icon tooltip. Click
the Interaction icon, the login password will appear in the address bar.
2. Click the Interaction icon to use web based VNC client. Click Yes in the Do you want to start the scan? popup, the
scan will start and the question becomes Do you want to stop the scan?
Click Yes to stop the scan and the VNC session will close after a few seconds. Go back to the On-Demand page to
check the scan result.
The user has 30 minutes to finish the interaction. After that, the VNC session will be closed
automatically.
VM Interaction and Scan video recording features are only available to users whose admin
profile has Allow On-Demand Scan Interaction enabled.
URL On-Demand
URL On-Demand allows you to upload a plain-text file containing a list of URLs, or an individual URL directly to your
FortiSandbox device. Upon upload, the URLs inside the file, or the individual URL, is inspected. The Depth to which the
URL is examined as well as the length of time that the URL is scanned can be set. You can then view the results and
decide whether or not to allow access to the URL.
To view On-Demand URLs and submit URLs to scan, go to Scan Job > URL On-Demand. You can drill down the
information displayed and apply search filters.

Fortinet Inc.
Scan Job
Submit File/URL Click the button to submit a file containing a list of scanned URLs, or submit an
individual URL.
Show Rescan Job Jobs generated from a customized rescan of a URL can be shown/hidden by this
option.
Click the close icon in the search filter field to clear all search filters.
The search filter will be displayed below the search filter field. Click the close icon
beside the search filter to remove the filter.
Clear all removable filters Click the Trash can icon to clear all removable filters.
Export Data Click the Export Data button to create a PDF or CSV snapshot report. The time
period of included jobs in the report depends on the selection of Time Period filter.
You can wait until the report is ready to view, or navigate away and find the report
later in Log & Report > Report Center.
View Jobs Click the icon to view the scan job(s) associated with the entry. Click the Back
button to return to the on-demand page.
Submission Time The date and time that the URL file or individual URL was submitted to
FortiSandbox. Use the column filter to sort the entries in ascending or descending
order.
Submitted Filename The submitted URL file name. If the scan is about an individual URL, the name is
scan_of_URL.
Submitted By The name of the administrator that submitted the file scan.
Rating Hover over the icon in this column to view the rating. The rating can be one or
more of the following: Clean, Low Risk, Medium Risk, High Risk, Malicious, or
Other.
During the URL scan, the rating is displayed as N/A. If a scan times out or is
terminated by the system, the file will have an Other rating.
Status The scan status can be Queued, In-Process, or Done.
URL Count The number of URLs associated with the submission when the scan is done.
When the scan is In-Progress, it shows (finished scan)/(total URLs of this
submission).
Comments The comments user enters when submitting the file scan.

Fortinet Inc.
Scan Job
To view the scan job(s) associated with the entry:
1. Double-click an entry in the table or select the View Jobs icon to view the specific URLs that were scanned.
2. This page displays the following information and options:
Back Click the Back button to return to the on-demand page.
Refresh Click the Refresh icon to refresh the entries displayed after applying search
filters.
Click the Close icon in the search filter field to clear all search filters.
View Details Select the View Details icon to view file information.
Scan Video When the scan is submitted, if Record scan process in video is selected, a
video icon is displayed. Clicking it allows users to select the VM type in which
the scan is performed and recorded. Select the VM type to play the video or
save it to a local hard disk.
The reset of displayed columns are determined by settings defined in System > Job View Settings > URL Detection
Columns. For more information, see Job View Settings on page 166.
3. Click the View Details icon to view file details. The View Details page will open a new tab. For information on the
View Details page, see Appendix A: Job Details page reference on page 207.
4. Close the tab to exit the View Details page.
To submit a file containing a list of URLs or an individual URL to FortiSandbox:
1. Click the Submit File / URL button from the toolbar. The Submit New File window opens.
2. Enter the following information:
Depth Enter the Recursive Depth in which URLs are examined. The original URL is
considered level 0. A depth of 1 will open all links on the original URL page and
crawl into them. The default value is define in the Scan Policy and Object >
Scan Profile page.
Timeout Enter the Timeout Value. The Timeout Value controls how long the device will
scan the URL. If the network bandwidth is low, the timeout value should be
larger to accommodate higher depth values. The default value is defined in the
Scan Policy and Object > Scan Profile page.
Direct URL To scan only a single URL, check the Direct URL checkbox. Enter the URL in
the Enter a URL field.
Select a File Click the Browse button and locate the plain-text file on your management
computer. The maximum number of URLs in this file is determined by
Maximum URL Value in Scan Policy and Object > Scan Profile page.
Comments You can choose to enter optional comments for future reference.

Fortinet Inc.
Scan Job
Debug Options To display the advanced options, check the Debug Options toggle. Users can
choose to follow scan profile settings or specify the VMs.
Follow VM Association The URL will be sent to its associated VMs for the WEBLink defined in the
settings in Scan Profile Scan Profile.
Enabled VM means its clone number is larger than 0.
Note: To use WindowsCloud VM, you need to purchase the subscription
service. URL will be sent to Fortinet Sandboxing cloud to scan.
Force to Scan the URL Inside A VM type must be selected. Settings from the Scan Profile will be overridden
VM and the URL will only be scanned in selected VM types. If VM images are not
ready, the VM list will not be displayed.
Allow Interaction Select the Allow Interaction checkbox to interact with the Windows VM. For
more information, see To use the Allow Interaction Feature: on page 88.
Record scan process in Select to enable video recording. After scan finishes, a video icon will show in
video the second level detail page. Clicking it will trigger a download or play the
video.
Add URL sample to threat Select to add the sample to malware package, if the result meets settings in
package Package Options
Enable AI Use AI engine to scan the file.
3. Click Submit.
To use the Allow Interaction Feature:
1. Go to Scan Job > URL On-Demand and click Submit File/URL from the toolbar.
2. In the Submit New File window, check the Allow Interaction checkbox.
When selected, only one VM can be specified.
3. Click Submit.
4. Go to the Scan Job > VM Jobs page. The job will be launched when a clone of a selected VM is available.
There are two ways to interact with the Windows VM.

Fortinet Inc.
Scan Job
1. Use a VNC client and connect to fsa_ip:port. The port number can be found in the Interaction icon tooltip. Click
the Interaction icon and the login password will appear in the address bar.
2. Click the Interaction icon to use web based VNC client.
3. Click Yes in the Do you want to start the scan? popup, the scan will start and the question becomes Do you want to
stop the scan?
Click Yes to stop the scan and VNC session will be closed. Go back to On-Demand page to check the scan result.
The user has 30 minutes to finish the interaction. After that, the VNC session will be closed
automatically.
VM Interaction and Scan video recording features are only available to users whose admin
profile has Allow On-Demand Scan Interaction enabled.
Cloud Storage
FortiSandbox can scan files stored on cloud, and currently supports Azure FS and Amazon S3. Go to Security Fabric >
Network Share to view and configure cloud storage access information.
Cloud Storage scans can be scheduled or run on-demand, and connectivity to the cloud storage can be tested.
Create New Click to create a new cloud storage connection.
Edit Select an entry from the list and then click Edit in the toolbar to edit the entry selected.
Delete Select an entry from the list and then click Delete in the toolbar to remove the entry
selected.
Scan Now Select an entry from the list and then click Scan Now in the toolbar to scan the entries.
Scan Details Select an entry from the list and then click Scan Details in the toolbar to view the
scheduled scan entries.
Test Connection Select an entry from the list and then click Test Connection in the toolbar to test the
connection. The result message will be displayed in the top message bar.
Name The name of the cloud storage.
Scan Scheduled The scan scheduled status. Scheduled network scans are done in parallel.
Type The mount type.
Share Path The cloud storage access URI.
Quarantine Displays if quarantine is enabled.

Fortinet Inc.
Scan Job
Enabled Displays if the cloud storage scan is enabled. If a cloud storage scan is disabled, its
scheduled scan will not be executed.
Status Displays the cloud storage connection status.

The states are:
l Network is Accessible
l Network Down
To create a new cloud storage scan:

Enabled Select to enable network share configuration. If network share is not

enabled, its scheduled scan will not run.
Network Share Name Enter the network share name.
Mount Type Select the mount type from the dropdown list. Depending on the type
selected, you will be asked for different information required to
access your cloud storage.
The following options are for cloud storage:
l Azure File Share
l AWS S3
SMB and Server Name/IP Enter the server fully qualified domain name (FQDN) or IP address.
NFS Settings
Share Path Enter the file share path. In the format /path1/path2
Username Enter a user name. For a domain users, use format domain_
name\user_name.
Scan Files Of Specified Pattern Select to include or exclude files which match a file name pattern.
File Name Pattern Enter the file name pattern.
Scan Job Priority When multiple network share scans run at the same time, the higher
priority scans will get more scan power compared to those having
lower priority. The priority can be set to High, Medium (default), or
Low.
Keep A Copy Of Original File On Select to keep a copy of the original file on FortiSandbox.
FortiSandbox
Skip Sandboxing for the same Select to skip Sandboxing scan on existing files (if applicable) and
unchanged files only Sandboxing scan new files. Existing files will only be scanned
by AntiVirus engine and Community Cloud query. This is to improve
scan speed.

Fortinet Inc.
Scan Job
Enable Quarantine of Malicious Files Select to enable quarantine then select the quarantine location from
the dropdown list. Files with a Malicious rating will be quarantined in
the quarantine location.
Quarantined file is placed inside a folder with the name of the Job ID.
Inside the folder each quarantined file is renamed with the
corresponding Job ID for that particular file and a meta file with more
information.
Enable Quarantine of Suspicious - Select to enable quarantine of Suspicious High Risk files, then
High Risk Files select the quarantine location from the dropdown list. Files with a
High Risk rating will be quarantined in the quarantine location.
information.
Enable Quarantine of Suspicious - Select to enable quarantine of Suspicious Medium Risk files, then
Medium Risk Files select the quarantine location from the dropdown list. Files with a
Medium Risk rating will be quarantined in the quarantine location.
information.
Enable Quarantine of Suspicious - Select to enable quarantine of Suspicious Low Risk files, then select
Low Risk Files the quarantine location from the dropdown list. Files with a Low Risk
rating will be quarantined in the quarantine location.
information.
Enable Quarantine of Other rating files Select to enable quarantine of Other Rating files, then select the
quarantine location from the dropdown list. Files with a Other rating ,
which means the scan was not completed for some reason, will be
quarantined in the quarantine location.
information.
Enable moving clean files to a Select to move Clean rating files to another location. By default, a
sanitized location new folder is created for each scheduled scan job in the sanitized
location and all clean files are copied under it with the original folder
structure. To save storage size, the user can un-check Keep a
complete copy of clean files for every scheduled scan, then files of
the same path will have only one copy saved in the sanitized
location.

Fortinet Inc.
Scan Job
Enable Scheduled Scan Select to enable scheduled scan. Select the schedule type from the
dropdown list. Select the minute or hour from the second dropdown
list.
Description Enter an optional description for the network share entry.
When a file is moved, to leave a copy in its original location, the user can go to the
Quarantine edit page or sanitized share and select the Keep Original File At Current
Location checkbox.
4. Select OK to save the entry.
To run a network share scan immediately:

2. Select a share.
3. Click the Scan Now button to run the scan immediately.
To test network share connectivity:

2. Select a share.
3. Click Test Connection to test connectivity with the network share.
Azure AWS S3 Settings
FortiSandbox can scan files stored on cloud using Azure AWS S3.
The following AWS S3 settings are available when creating a new Network Share:
AWS S3 Bucket Name Enter the bucket name, found in the AWS management console in the S3 Service page.
S3 Bucket Folder Path Enter the folder's path, starting with /.
AWS IAM Access Key ID Enter the access key ID. To find the key ID, go to the AWS management console, click
on the username in the top-right of the page, then click the Security Credentials link to
generate the access key ID.
Secret Access Key Enter the secret key matching the access key ID. The secret access key is displayed
when you generate the access key ID.
Confirm Secret Confirm the secret access key.

Access Key

Fortinet Inc.
Scan Job
Azure File System
FortiSandbox can scan files stored on cloud using Azure File System.
The following Azure file share settings are available when creating a new Network Share:
Domain of the Share URL Enter the Azure file share URL's domain name, found in the Azure server's menu
at Storage Accounts > storage account name > Settings > Properties > URL.
Path of the Share URL Enter the path of the URL, found in the Azure server's menu at Storage Accounts
> storage account name > File Service > Files > Share path starting with /.
Name of the Storage Account Enter the name of the storage account, found in the Azure server's menu at
Storage Account > storage account name.
Access Key of the Account Enter the access key of the account, found in the Azure server's menu at Storage
Account > storage account name > Settings > Access Keys.
Confirm Access Key Confirm the access key.

Fortinet Inc.
Scan Policy and Object
Scan Profile
Use the Scan Profile page to do the following:

l Configure the types of files that are put into the job queue.
l Configure the VM image to scan pre-defined file types and user defined file types.
l Enable adaptive VM scan.
l Enable parallel VM scan.
l Configure VM scan ratio.
File types
FortiSandbox supports the following file types by default.
Executables BAT, CMD, DLL, EML, EXE, JAR, JSE, MSI, PS1, UPX, WSF, and VBS.
Most DLL files cannot be executed within a VM. You can enable pre-filtering with
the following CLI command:
sandboxing-prefilter -e -tdll
Only the DLL files which can be executed inside a VM are put into the Job Queue.
Archives 7Z, ARB, BZIP, BZIP2, CAB, ISO, EML, GZIP, LZW, RAR, TAR, XZ, ZIP, and
more.
Each file in an archive is extracted and scanned using the Scan Profile settings.
To view or change the maximum extracted files, use the prescan-config CLI
command: prescan-config
Microsoft Office Word, Excel, PowerPoint, Outlook, and more.
Adobe PDF, SWF, and Flash.
Static Web Files HTML, JS, URL, and LNK.

Fortinet Inc.
Android File APK.
MACOSX Files MACH_O, FATMACH, DMG, XAR, Linux, and APP.
WEBLink URLs submitted by FortiMail devices or sniffed from email body by sniffer.
You can create a custom file type and associate it to an existing VM. Therefore, file type
analysis is not limited to just the file types listed in the table above.
Sometimes input sources send .eml files to FortiSandbox. For example, FortiMail sends .eml files to FortiSandbox
when the .eml file is attached inside an email. FortiSandbox parses the .eml file to extract its attachments and perform
file scans.
When sandboxing-embeddedurl is enabled, the top three URLs inside the email body are extracted and scanned
along with the .eml inside the same VM. If the URL is a direct download link, the file is downloaded and sent with the URL
to be scanned.
This feature is useful when you want to scan older emails when they are loaded to FortiSandbox, such as through an On-
Demand scan or Network Share scan.
By default, FortiMail holds a mail item for a time to wait for the FortiSandbox verdict. Before
FortiSandbox scans a file or URL sent from FortiMail, it checks if FortiMail still needs the
verdict as FortiMail might have already released the email after time out. If not, FortiSandbox
gives the job an Unknown rating and skipped status.
Use the CLI command fortimail-expired to enable or disable this expiration check.
To use remote VMs including MACOSX and Windows Cloud VM, you need to purchase
subscription service from Fortinet. Files are uploaded to Fortinet Sandboxing cloud to scan
according to Scan Profile settings.
Scan Profile Pre-Filter Tab
Use the Job Queue page to define file types and URLs that are allowed to enter the job queue if they are from a sniffer,
adapter, or device other than FortiMail.
Files or URLs submitted through On-Demand, RPC JSON API, network share, or FortiMail are
always put into the job queue even if their file types are not set to enter the job queue.
For unsupported or disabled file types, those files are dropped and rated as clean.
To allow a file type to enter the job queue:
Click its toggle button to enable it. If the button is greyed out, files of that type are dropped.
To enable pre-filter for selected file types:
Click its toggle button to enable it. If the button is enabled, files of that type are pre-filtered.

Fortinet Inc.
To use trust results from trusted resources during pre-filter:
Click its toggle button to enable it. If the button is enabled, files rated by that resources are pre-filtered.
When FortiAI entrust is enabled, files rated by FortiAI as clean skip the sandboxing VM scan step.
When Trusted Vendor is enabled, executable files from a small internal list of trusted vendors skip the sandboxing scan
step.
When Trust Domain is enabled, files downloaded from a small internal list of trusted domains skip the sandboxing scan
step.
If there is a long queue of pending jobs, consider turning off some file types to the job queue.
For example, in most networks, many files are static web files (JavaScript, html, aspx files) and
Adobe Flash files. When you have performance issue, consider turning them off.
If a file type is turned off, files of that type already in the job queue will still be processed. You
can use the pending-jobs command or Scan Job > Job Queue page to purge them.
To determine the number of each file type and its input source, use the pending-jobs
command or the Scan Job > Job Queue page.
Scan Profile VM Association Tab
The VM Association tab defines file type and VM type association. Association means files of a certain file type are
sandboxed by the associated VM type. This page displays all installed VM image(s), their clone numbers, versions, and
status.
To configure VM association:
Click the edit icon. The left panel shows installed applications and the right panel shows current associated file types.
For an associated file to be sandboxed in the VM image:

l Its file type has to be configured to enter a job queue.
l The VM image has a non-zero clone number (i.e. it is enabled).
l The file is not filtered out from the Sandboxing scan. For more information, see the
sandboxing-prefilter command in the CLI Reference guide.
If sandboxing pre-filtering is OFF for a file type, it will be scanned by each associated VM type; if sandboxing pre-filtering
is ON, files of this file type will be statically scanned first by an advanced analytic engine and only suspicious ones will be
scanned by associated VM type. Other files go through all scan steps except the Sandboxing scan step.
To improve the system scan performance, you can turn on the sandbox pre-filtering of a file type through the
sandboxing-prefilter CLI command. For example, you can associate web files to VM types. If the sandboxing
pre-filtering is OFF for js/html files, all of them will be scanned inside associated VM types. This may use up
system's sandboxing scan capacity because web files are usually large in amount. It is recommended to enable
sandboxing pre-filtering for web files. For more details, refer to the FortiSandbox 4.0.2 CLI Reference Guide.

Fortinet Inc.
To edit an associated file type:
1. Click Scanned File Types area and a file type list will be displayed.
2. File types are grouped in different categories. Clicking the category title will toggle associations of all grouped file
types. Clicking on an individual file type will toggle its own association. When the file type is displayed in full width, it
means the file type is associated.
Add a user defined extension:
Make sure the user defined extension is enabled.

1. Click the + sign and enter a non-existing extension.
2. Click the green check mark. The user can then click on the new extension to toggle its association.
Finalizing the list of Scanned File Types:
1. After the user has finished the association configuration, click the Scanned File Types to finalize the list.
2. Click the Apply button to apply the changes.
Files will then be scanned by the associated VM images.
FortiSandbox provides default scan profile settings.
For files with a user defined extension, they will be scanned by a VM image no matter what file
types they really are. Only a file's extension counts.
HA-Cluster
In an HA cluster environment, it is highly recommended that all cluster nodes have the same enabled VM. The Scan
Profile can only be configured on the primary node, and these configurations are synchronized to the worker nodes. The
primary node will collect all enabled VM image information. If a unique VM image is only installed on a worker node, you
can still configure the primary node and the result will be synchronized to that worker node.
In a cluster environment, it is highly recommended that all cluster nodes have the same enabled VM, although it is not
enforced. If cluster nodes do not have the same list of enabled VM types, a warning message will show up on top of the
Scan Profile page for five seconds.
The Scan Profile can only be configured on the primary node and the configurations will be synced to worker nodes. The
primary node will collect all installed VM image information. If a unique VM image is only installed on a worker node, you
can still configure on the primary node and the result will be synchronized to that worker node.
HA-Cluster Scan Profile VM Association Tab
This page displays all cluster nodes enabled VM images and their enabled extensions. If the clone number is 0, the VM
type is disabled. In this case, the enabled simulator VM is not listed.

Fortinet Inc.
The tips beside each cluster nodes display the unassociated file types on this node. The fix now link opens a
configuration page for the file type associations. It is highly recommended that all cluster nodes have the same
associated file types as the enabled VM.
Cluster nodes will be grouped with same enabled VM image. The tips and fix now link disappear when there are no
longer any unassociated file types.
To configure associations for the HA-Cluster:
Click the pencil icon or the fix now link to edit the corresponding HA node.
A new page will appear, with the left side panel displaying the installed applications and the right side panel displaying
the currently associated file types.
To edit the associated file type for the HA-Cluster:
1. Click the Scanned File Types area. The Select Extensions pane is displayed.
2. Click the name of the extension to toggle associations of grouped file types. The file types are grouped in different
categories. Click an individual file type to toggle the corresponding association on or off.
When the file type is displayed in the full width of the Select Extensions pane, it means the file type is associated (for
example, the .jse extension above). When the file type is displayed in partial width, it means the file type is not
currently associated (for example, the .exe extension above).

Fortinet Inc.
To add a user-defined extension for the HA-Cluster:
First, make sure the user-defined extension is enabled in the Pre-Filter tab.
To create a new user defined extension for the HA-Cluster:
1. Scroll to the bottom of the Select Extensions pane and click the + icon next to User defined extensions.
2. Enter a new extension in the text window.

3. Click the green check mark to confirm.
4. You can then click the new extension to toggle its association.
To add a user defined extension defined by other cluster nodes:
1. Click the + icon.

2. Enter the extension defined by other cluster nodes in the text window.
3. Click the green check mark to confirm.
4. You can then click on the new extension to toggle its association.
Finalizing the list of Scanned File Types in the HA-Cluster:
1. After you have finished the VM association, click Scanned File Types to finalize the list.
2. Click the Apply button to apply the changes. The configuration on the primary node will be synchronized with the
edited node in real-time. Files will then be scanned by the associated VM images.
3. On the primary node, an alert message may appear in the bell icon in the upper right corner after updating the
configuration. Click this, and the bell icon shows Scan Profile requires your action. Clicking the alert message
redirects to the Scan Profile > VM Association page where you can use the fix now links to resolve issues with file
extensions..

Fortinet Inc.
The url, htm, and lnk file types in the Web pages group are for the file types containing
shortcuts of a web link, while the WEBLink type in the URL detection group is for URL
addresses. The WEBLink type follows the depth and timeout settings in the Pre-Filter tab.
There might be malicious URLs, including direct download links, inside Office files and PDF
files. You can scan selected URLs along with the original file inside files' associated VM. To
turn on this feature, use the sandboxing-embeddedurl CLI command. For more
information, see the FortiSandbox CLI Reference Guide.
Scan Profile Advanced Tab
Use the Advanced page to define advanced features for file/URL detection.
Enable Adaptive VM Scan
Enable this option to dynamically adjust the number of clones of enabled local VMs. Local VMs include default VMs,
optional VMs, and customized VMs.
Enabling this option does not affect the number of remote MacOS or WindowsCloudVMs.
In an HA-Cluster, only the primary node can enable this option and the setting is immediately synced to all nodes.
A VM's clone number is increased when its usage is higher than a threshold and there are assignable clones or
reassignable clones.
A VM's clone number is reduced when it has reassignable clones and there are other VMs requiring more clones.
An enabled local VM has at least one clone. At any time, the number of assignable clones cannot be less than 0.
FortiSandbox-AWS, FortiSandbox-Azure, and FortiSandbox-HyperV do not support Adaptive

Scan.
Enable Parallel VM Scan
Normally, a job is scanned in VM in sequence if the file type is associated with a different VM. Enable this option to allow
FortiSandbox to run multiple VMs at the same time for a job.
The parallel VM scan only happens when a job needs two or more VM scans and those VMs have a free clone. If there
are no free clones, then parallel VM scan does not happen.

Fortinet Inc.
In an HA-Cluster, only the primary node can enable this option and the setting is immediately synced to all nodes.
Enhance VM Scan Ratio
Enable this option to allow a customized ratio for jobs that are scanned in VM. The ratio is a low bound for the jobs that
need to be scanned in VM, meaning that the percentage of jobs scanned in VM can be equal to or higher than the preset
ratio.
To configure this option, enable Set customized sandboxing ratio and set a ratio between 1 and 100.
This option is an extra filter that sends a job to the VM. When not enabled, the VM scan is skipped.
This option does not affect jobs that should normally be scanned in VM. Those jobs are still VM scanned.
In the system log, FortiSandbox creates a job event log (debug level) every 5 minutes for VM scan ratio statistics for jobs
in about the last one hour. This lets you see how many files were scanned in VM in the last hour.
VM scan ratio calculation
The ratio is recalculated for each job based on the total old jobs from one hour ago to the current job submission time.
Example 1. The preset ratio is 60%, there are 100 total jobs in the last hour before the current job, and 60 of 100 have
been sent to VM scan. The ratio before the current job is 60*100.0/100 = 60% (<=60%). So the current job will be sent to
VM.
Example 2. You submit another job after the above example. The scan ratio is (60+1)*100.0/(100+1) = 60.39% (>60%).
So this job won’t be sent to VM.
Because the VM scan takes time and there are jobs rated by cache, AV, allowlist/blocklist, Static Scan, and so on, the
ratio of jobs finished in VM scan over all finished jobs in the last hour can be different from the ratio set for this feature.
In an HA-Cluster, only the primary node can enable this option and the setting is immediately synced to all nodes. Each
node uses its local scan jobs to calculate the latest VM scan ratio, and then compare the universal ratio to decide
whether to send a current job to VM.
Cache VM Scan Results
Enable this option to allow VM scan cache.
File detection timeout
FortiSandbox supports a customized timeout value to control the tracer running time in VM.
Currently, MAC OSX and Windows Cloud VM do not support file detection.
To configure file detection timeout:
1. Go to Scan Policy and Object > Scan Profile > Advanced.

2. Enable File detection timeout and enter a Default Timeout value between 60 and 180 seconds.
A shorter Default Timeout value gives better performance and faster scan speed, but lowers accuracy. For a
balance of speed and accuracy, use a value that falls in the middle of the 60-180 second range.

Fortinet Inc.
3. Click Apply.
The Scan results shows the VM Scan time.
URL detection timeout
If this option is enabled, FortiSandbox scans URLs (WEBLinks). You can also specify the Default Timeout setting (from
30 to 1200 seconds).
If this option is not enabled, the default timeout is 60 seconds.
URL depth limit
Enable this option to examine the recursive depth of URLs (from 1 to 5).
If this option is not enabled, only the URL itself is examined.
URL content limit
Enable this option to specify the maximum number of URLs from 1 to 10000.
If this option is not enabled, the maximum number of URLs is unlimited
Enable Rating Cloud Service
Enable this option to enhance the rating of the submission by using the rating engine and supervised machine learning in
the cloud. The result provides a better detection rate.
Enable Code Emulator
Enable this option to forward the Windows executable submitted file for emulation to find traces of malicious code.
File Scan Priority
Files of different file types and input sources have different processing priority. Priority means, under the same situation,
files in the high priority queue will have a higher chance of being processed first. This means if a VM image is configured
to scan two different job queues, the job queue with high priority will be scanned first and only when this queue is empty
will the low priority job queue be processed. Therefore, it is recommended that different job queues are associated with
different VM image(s). In this release, job queue priority can be adjusted in the Scan Policy and Object > Job Queue
Priority page. By default, the job queue priority is:
Files from On-Demand/RPC
sniffer/device submitted executable files and Linux files
user defined file types
sniffer/device submitted Office files
sniffer/device submitted PDF files
sniffer/device submitted Android files sniffer/device submitted MacOS files
URLs of all sources
device submitted Adobe flash/web files
sniffer submitted Adobe flash/web files

Fortinet Inc.
Adapter submitted files

Network share submitted files
File Scan Flow
After a file is received from an input source, it goes through the following steps before a verdict is reached. If a verdict
can be reached at any step, the scan stops.
1. Filtering and Static Scan
In this step, the file is scanned by the AntiVirus engine and the YARA rules engine. Its file type is compared with the
Scan Profile page > Pre-Filter tab settings to decide if it should be put in the job queue. If yes, it is compared with the
allowlist and blocklist and overridden verdict list.
For certain file types, such as Office and PDF files, they are scanned statistically in virtual engines to detect
suspicious contents. If they contain embedded URLs, the URLs are checked to see if the website is a malicious
website.
2. Community Cloud Query
The file will be queried against the Community Cloud Server to check if an existing verdict is available. If yes, the
verdict and behavior information are downloaded. This makes the malware information shareable amongst the
FortiSandbox Community for fast detection.
3. Sandboxing Scan
If the file type is associated with a VM type, as defined in the Scan Profile page > VM Association, the file is scanned
inside a clone of that VM type. A file that is supposed to be scanned inside a VM might skip this step if it's filtered out
by sandboxing prefiltering. For more information, see the FortiSandbox CLI Guide for the sandboxing-
prefiltering command.
URL Scan Flow
After a URL is received from an input source, it goes through the following steps before a verdict is reached. If a verdict
can be reached at any step, the scan stops.
1. Static Scan.
In this step, the URL is checked against the user uploaded Allowlist or Blocklist and the Overridden Verdicts list.
2. Sandboxing Scan.
If WEBLink is associated with a VM type as defined in the Scan Profile page > VM Association tab, the URL is
scanned inside a clone of that VM type. If the URL type is enabled with the sandboxing pre-filtering
command, only URLs whose webfiltering category is UNRATED is scanned inside a VM.
For more information, see the the sandboxing-prefiltering command in the FortiSandbox CLI Guide.
In the Static Scan step, URLs are checked against the user uploaded allowlist and blocklist in
this order and rated as Clean or Malicious: Domain black list > URL REGEX black list > URL
black list > Domain white list > URL REGEX white list > URL white list. For example, if users
enter *.microsoft.com in the domain allowlist and
http://www.microsoft.com/.*abc/bad.html in the URL blocklist, URL
http://www.microsoft.com/1abc/bad.html is rated as Malicious.

Fortinet Inc.
VM Settings
Go to Scan Policy and Object > VM Settings to view all installed VM images and configure the number of instances of
each image.
VM images are grouped into the following categories:
Default VMs Basic set of images installed on FortiSandbox by default. The FSA-AWS models are the
Windows VMs installed on AWS.
Optional VMs Optional VM images published by Fortinet.
Customized VMs User created images and uploaded to FortiSandbox.
Remote VMs Fortinet supports MACOSX and WindowsCloudVM as remote VMs. You can purchase
subscription services from Fortinet to reserve clone numbers in the FortiSandbox
Cloud.
There is no trial license for MACOSX VM.
In cluster mode for MACOSX remote VMs, all cluster nodes share a collected pool of
reserved clones from each unit. This means that even if a node has no remote VM
contract, it can still upload files to the cloud for scanning. For the cluster as a whole, the
number of files being scanned on the cloud cannot exceed the total number of reserved
clone numbers at any given moment.
In cluster mode for WindowsCloudVM, VM00 units in the cluster can purchase
WindowscloudVM seat counts. These cloud VM clones are local to the VM00 unit and
are not shared.
Simulator VMs For v3.1.1 and later, LinuxOT is supported as a simulator Linux VM for the OT industry.
The LinuxOT simulates Modbus, SNMP, IPMI, FTP, and TFTP protocols to detect
malware. The Siemens application is supported inside the LinuxOT. To enable
LinuxOT, purchase the Industry Security Signature subscription from Fortinet. To scan
files, submit them through Windows VM. The OT Malware scans for presence of OT
related protocols where the LinuxOT captures that behavior.
When Fortinet publishes a new version of VM image on its image server, the image appears in the Optional VMs group
with a download button in the Status column. Click the button to start downloading. After downloading all the images,
click the Ready to Install button to install all downloaded images. No reboot is necessary for installation.
After an image is installed, its license key is checked. If no keys are available, the image status is installed but disabled
until the key is imported and the image is activated. After the image is activated, you can start using it by setting its clone
number to be greater than 0. Then the image status changes to activated.

Fortinet Inc.
Edit Clone Number Edit the selected entry. Click the green checkmark to save the new number and then
click Apply.
Delete VM Delete the selected entry. VMs deleted in the GUI are deleted when the system reboots.
You cannot delete the default set of four Windows VMs.
Undelete VM After deleting a VM, you can use Undelete the VM to recover it. After the system reboots
and the delete action is completed, you cannot undelete a VM.
VM Screenshot Take a screenshot of a running VM and view the filename the VM is scanning. This is
only available for a admin users.
Enabled VM Types The maximum number of VM types that can concurrently run. The maximum is four on
models other than FSA-3000E. The maximum is six on FSA-3000E.
Keys Maximum number of keys including used key numbers and installed key numbers.
Clone Number Maximum clone number and the number of the installed Windows license. For example:
l FSA-3000E, the maximum clone number is 56.
l FSA-2000E, the maximum clone number is 24.
l FSAVM00, the maximum clone number is 8.
To expand the unit's scan power, you can purchase cloud Windows VM subscription.
Files can be sent to Fortinet Cloud Sandboxing to scan.
Name Name of the VM image. The name is unique in the system. If you upload a new
VM image of the same name, the current installation is replaced.
To see the VM’s usage chart, click the Chart icon beside the Name.

Fortinet Inc.
Version VM image version. If there is a new version of an image on the Fortinet Image Server, a
New Version Available icon appears. You can download, install, and activate it.
Status VM image status such as:

l Ready to Download
l Ready to Upgrade
l Downloading (shows a progress bar)
l Ready to Install (Install or Remove downloaded image)
l Installing
l Installed (Disabled)
l Installed (No Keys Available)
l Activated
Enabled If an image's clone number is 0, it is disabled. Otherwise it is enabled.
Clone# VM clone number. Double-click the number to edit it and then click the green checkmark
to save the new number. Click Apply to apply the change. The VM system re-initializes.
The total clone number of all VM images cannot exceed the number of installed
Windows licenses. For example, for FSA-2000E, the maximum clone number is 24.
We recommend applying more than 8+clone_number*3 of memory on your FSA unit.
Load# The used VM clone number. For example, if a cluster primary node is set to use 50% of
sandboxing scan power, the load # is half of clone #.
Extensions List of all the file types the VM image is associated with. It means files of these types will
be scanned by this VM if these types are determined to enter the job queue. The system
decides if they need to be sandboxed.
If the sandbox prefiltering is turned off for a file type, it will be scanned inside each
associated VM type.
If sandbox prefiltering is turned on, files of this file type will be statically scanned first by
an advanced analytic engine and only suspicious ones will be scanned inside
associated VM types.
You can define file type and VM association in Scan Policy and Object > Scan Profile.
You can double-click the value to access the Scan Profile page to edit the list.
Enabled clone numbers are checked against allocated CPU and memory resources. If there
are not enough resources, a warning message appears and the setting is denied.

Fortinet Inc.
Virtual Machine
The FortiSandbox VM host is based on a modified hypervisor.
Model, License, and VM Information
Model Windows License Default Windows VMs Number of VM Hosts Supported
FSA-3000F Windows 10 WIN10X64VMO19F (with Supports 8 VM hosts by default, maximum

Office 2019 Office) up to 72 VM hosts.
FSA-3000E Windows 7 WIN7X86VM (with Office) Supports 8 VM hosts by default, maximum

Windows 8.1 WIN7X64VM up to 56 VM hosts.
Windows 10
Office 2016
FSA-2000E Windows 7 WIN7X86SP1O16 (with Supports 4 VM hosts by default, maximum

Windows 8.1 Office) up to 24 VM hosts.
Windows 10 WIN7X64SP1
Office 2016
FSA-1000F Windows 7 WIN7X64SP1O16Z (with Supports 8 VM hosts by default, maximum

Windows 10 Office) up to 14 VM hosts.
Office 2016
FSA-500F Windows 7 WIN7X64SP1O16Z (with Supports 2 VM hosts by default, maximum

Windows 10 Office) up to 6 VM hosts.
Office 2016
FSAVM00/0T WIN7X86SP1O16 (with No VM host by default, maximum up to 8 VM

Office) hosts.
WIN10X64VM
FortiSandbox devices purchased after March 17, 2017 do not support WINXP VM type and its licenses due to Microsoft
EOL.
The number of supported VM hosts for each model is only for images published by Fortinet. This number might be lower
for custom images with high resource requirements.
You can download and use optional images from VM Settings > Optional VMs. The VM name shows the OS type. O16 in
the name means Microsoft Office 2016 is installed.
The following software is installed on each pre-installed Windows guest image:
l Adobe Flash Player
l Adobe Reader
l Java Run Time
l MSVC Run Time
l Microsoft .Net Framework
l Microsoft Office software (only on certain VM types)
l Web Browsers

Fortinet Inc.
Android VM is free to download and use.

You can build custom VM images but you must have software licenses for your custom images.
Clone Number for VM Image
The following is the default clone number for VM images.
FSA-500F
VM Image Number of Clones
WIN7X64SP1O16Z 2
FSA-1000F
WIN7X64SP1O16Z 2
FSA-2000E
WIN7X86SP1O16 2
WIN7X64SP1 2
FSA-3000E
WIN7X64VM 4
WIN7X86VM 4
FSA-3000F
WIN10X64VMO19F 8
For FortiSandbox devices purchased after March 17, 2017, WINXP VM types and its licenses
are no longer supported due to Microsoft EOL.

Fortinet Inc.
You can change the default settings to suit the majority of file types in your environment. For example, if most file types
are Office files and WIN7X86VM is associated with Office files, you can decrease the clone number of other VM images
and increase the clone number of the WIN7X86VM image.
In a cluster environment, clone numbers should be configured individually on each node as their models might be
different.
VM Screenshot
When the user admin clicks the VM Screenshot button, all currently running guest images along with the processed file
name will be displayed. Click the VM Screenshot button, then the PNG Link button to view a screenshot of running
clones. Clicking on the Refresh button in upper-left corner of the popup window will refresh the running image list.
This feature is useful to troubleshoot issues related to guest images.
This button is only available when login user is admin.
OT Simulation
OT Simulation is a simulated Linux VM developed by Fortinet to address the OT industry’s need to detect malware which
sends commands or collects data from their Industrial Control systems ( ICS ). The implementation in FortiSandbox uses
an Industrial Security Signature contract in a Linux VM that simulates protocols such as Modbus, SNMP, IPMI, FTP,
TFTP, HTTP, S7comm and BACnet to detect the malware.
Preparing the OT Simulator VM on FortiSandbox
1. First, log in to Fortinet One, select Manage/View Products, and ensure the unit's Serial Number contains the "ISSS"
contract and that it is not expired.
2. On the FortiSandbox System > FortiGuard page, click the Connect FDN Now button to download the latest
contracts and engines.

Fortinet Inc.
3. Wait for a while then refresh the FortiGuard page. There is a new entry for Industry Security Signature.
4. In Dashboard > Status > Licenses widget, check that the Industrial Security Service contract is downloaded and
valid.
5. Go to the VM Image page and find LinuxOT under the Simulator VMs table.
6. Click the download icon in the status column of the LinuxOT row.

Fortinet Inc.
7. Click the Install button as below and wait for the installation to complete and the FortiSandbox to reboot.
8. After rebooting, the LinuxOT VM is installed with clone disabled.

9. Toggle the switch in the Clone # column to enable it then press Apply to save the changes.

Fortinet Inc.
Scanning the files with the Simulator VM enabled
1. To Scan a file using the Simulator VM, submit a scan job to the Windows VMs. The Simulator VM will detect network
operations automatically.
2. After the scan is finished, check the job detail to confirm the following:
l There should be more than one .pcap file in the PCAP Information section.
l There should be at least one item containing the Lateral Movement category in the Network Operations
section.

Fortinet Inc.
General Settings
Go to Scan Policy and Object > General Settings to view and configure the General Options.
Upload malicious and suspicious The FortiSandbox Community Cloud is a collection of 0-day threats submitted
file information to Sandbox by participating FortiSandbox devices around the world. A query of the file is
Community Cloud sent to the cloud to check if a sample is a known 0-day threat. The rating is
confidently used as-is if available; otherwise, FortiSandbox continues the file
to the behavioral scan.
Enable to upload malicious and suspicious file and URL information to the
Sandbox Community Cloud. If enabled, the original file/URL, file/URL
checksum, tracer log, verdict, submitting device serial number, and
downloading URL are uploaded.
Submit suspicious URL to Enable to submit malware downloading URL to the FortiGuard Web Filter
Fortinet WebFilter Service Service.
Upload statistics data to Enable to upload statistics to FortiGuard. If enabled, the following are
FortiGuard service uploaded: submitting device serial number and firmware, job-related results
and statistics.

Fortinet Inc.
Allow Virtual Machines to access Enable to allow Virtual Machines to access external network through the
external network through outgoing port3. For further details, refer to the port3 (VM outgoing interface)
outgoing port3 topic in Interfaces on page 144.
Status Port3 status to access the Internet.
Gateway Enter the next hop gateway IP address.

The System and VM cannot use the same gateway to access the Internet.
Disable SIMNET if Enable to disable SIMNET when Virtual Machines are not able to access
Virtual Machines are not external network through the outgoing port3.
able to access external
network through
outgoing port3
DNS DNS server used by VM images when a file is scanned.
Use Proxy Enable to use the proxy. Configure the Proxy Type, Server Name/IP, Port,
Proxy Username, and Proxy Password.
When the proxy server is enabled, all the non UDP outgoing traffic started
from Sandbox VM will be directed to the proxy server.
When a proxy server is used, if the proxy server type is not SOCKS, the
system level DNS server is used. If the type is SOCKS5, users need to
configure an external DNS server that port3 can access.
For other traffic started by FortiSandbox firmware, such as FortiGuard
Distribution Network (FDN) upgrades, the configurations should be done
under the Network menu.
Proxy Type Select the proxy type from the dropdown list. The following options are
available:
l HTTP Connect
l SOCKS v4
l SOCKS v5; requires DNS
UDP protocol is not supported.
Server Name/IP Enter the proxy server name or IP address.
Port Enter the proxy server port number.
Proxy Username Enter a proxy username.
Proxy Password Enter the proxy password.
Apply default passwords to User can define a list of passwords that can be tried to extract archive files.
extract archive files Input passwords line by line.
Set password for password User can define one password for PDF and Office files.
protected PDF and office files
Set customized password for User can define their own password for the original sample when downloaded
original files from FortiSandbox.

Fortinet Inc.
Include a readme file containing All downloaded archive file will have a readme file with the customized
extraction password in password. When disabled, the readme file will be removed from the
downloaded job package downloaded archive file.
Disable Community Cloud Query By default the Cloud Query is enablesd. Disable the Cloud Query in the
following scenarios:
l You have an enclosed environment. Disabling the Cloud Query will
improve the scan speed.

l You receive an incorrect verdict from the Cloud Query and before Fortinet
fixes it, you can turn it off temporarily.
Disable AV Rescan of finished AV signature updates are frequent (every hour). Running an AV rescan
Jobs against finished jobs of the last 48 hours could hinder performance. You have
the option to disable the AV Rescan to improve performance.
Enable URL call back detection Enable URL call back detection. When enabled, previously detected clean
URLs in sniffed traffic are frequently queried against Web Filtering service.
Enable log event of file Enable to log the file submission events of an input source.
submission
Devices Select to log the file submission events of a device, like FortiGate, FortiMail, or
FortiClient.
Adapter Select to log the file submission events from an adapter like a Carbon Black
server.
Network Share Select to log the file submission events when they are from a network share.
ICAP Select to log the file submission events from an ICAP client.
BCC Adapter Select to log the file submission events from a BCC client.
MTA Adapter Select to log the file submission events from a MTA client.
Reject duplicate file from device Enable to reject duplicate files from devices.
Delete original files of Clean or Enable to delete original files of Clean or Other ratings after a specified time. If
Other rating after the time is 0, the original files with either Clean or Other ratings will not be kept
on the system. Original files of Clean or Other rating can be kept in system for
a maximum of 4 weeks.
Day Enter the day.
Hour Enter the hour.
Minute Enter the minute.
Delete original files of Malicious Enable to delete original files of Malicious or Suspicious ratings after a
or Suspicious rating after specified time.
Day Enter the day.

Fortinet Inc.
Delete all traces of jobs of Clean Enable to delete all traces of jobs of Clean or Other ratings after a specified
or Other rating after time. Traces of jobs with Clean or Other rating can be kept in system for a
maximum of 4 weeks.
Day Enter the day.
Delete all traces of jobs of Enable to delete all traces of jobs of Malicious or Suspicious ratings after a
Malicious or Suspicious rating specified time.
after
Day Enter the day.
By default, job traces of files with a Clean or Other rating will be kept for three days.
Job Priority
This page displays the job queue priority list. The priority list can be dynamically adjusted by dragging and dropping the
file type entry in order of priority. The closer an entry is to the top, the higher the priority.
Once you have ordered your list, click Apply to save the change or Reset to go back to its default settings.

Fortinet Inc.
Job Archive
The Job Archive page allows you to setup a network share folder to save a copy of scan job information. Archive location
is a network share folder. Archiving job information is useful when processing job files and data with third party tools.

Fortinet Inc.
Go to Scan Policy and Object > Job Archive to view the Archive Location page.
The following options can be configured:
Enabled Select to enable the job archive feature.
Mount Type Select the mount type of the network share folder:
l SMB v1.0
l SMB v2.0
l SMB v2.1
l SMB v3.0
l NFSv2
l NFSv3
l NFSv4
l Azure File Share
l AWS S3
l AWS S3 BJ
l AWS S3 NX
Server Name/IP Enter the server fully qualified domain name (FQDN) or IP address.

Fortinet Inc.
Share Path Enter the file share path in the format of /path1/path2.
Username Enter a user name. The username should have the write privilege of the remote
network share folder.
File Name Select the file name from the dropdown list. The following options are available:
l Scan Job ID as File Name
l Original File Name
Folder Structure Select the folder structure from the dropdown list. The following options are
available:
l Save all files in the same folder
l Save file in folders of the scan finish time
l Save file in folders of ratings
Password on Archive File Enter the password for saved jobs.
Confirm Password on Archive Enter the password a second time for verification.
File
Save meta data When selected, the job summary information will be saved.
Save tracer log When selected, the job's tracer log will be saved.
Save Malicious rating jobs When selected, files of Malicious rating will be saved.
Save Suspicious rating jobs When selected, files of Suspicious rating will be saved.
Save Clean rating jobs When selected, files of Clean rating will be saved.
Save Other rating jobs When selected, files of Other rating will be saved.
Allowlist and blocklist
Allowlist and blocklist help improve scan performance and malware catch rate as well as reduce false positives and can
be appended to, replaced, cleared, deleted, and downloaded. These lists contain file checksum values (MD5, SHA1, or
SHA256) and domain/URL/URL REGEXs. Domain/URL/URL REGEX lists are used in both file and URL scanning. For
files, the file's downloading URL is checked against the list. Wild Card formats, like *.domain, are supported. For
example, when the user adds windowsupdate.microsoft.com to the Allow Domain List, all files downloaded from
this domain will be rated as Clean files immediately. If the user adds *.microsoft.com to the Allow Domain List, all
files downloaded from sub-domains of microsoft.com will be rated as Clean immediately.
For URLs, you can add a raw URL or a regular expression pattern to the list. For example, if the user adds
.*amazon.com/.*subscribe to the allowlist, all subscription URLs from amazon.com will be immediately rated as
Clean. This way, subscription links will not be opened inside the VM and become invalid.
l If an allowlist entry is hit, the job rating will be Clean with a local overwrite flag.
l If a blocklist entry is hit, the job rating will be Malicious with a local overwrite flag. Malware names will be FSA/BL_
DOMAIN, FSA/BL_URL, FSA/BL_MD5, FSA/BL_SHA1, or FSA/BL_SHA256.
l If the same entry exists on both lists and is hit, the blocklist will take priority and the file will be rated Malicious.

Fortinet Inc.
To manage the allowlist and blocklist manually:
1. Go to Scan Policy and Object > Allowlist/Blocklist.

2. Click the menu icon beside Allowlists or Blocklists to see its menu items.
3. Click the + button to add a new entry.
The URL pattern has a higher rating priority than a domain pattern. For example, if you
enter *.microsoft.com in a domain allowlist and
http://www.microsoft.com/*abc/bad.html in a URL blocklist, a file from
http://www.microsoft.com/1abc/bad.html will be rated as Malicious.
4. Click OK.
To manage the allowlist and blocklist through files:
1. Go to Scan Policy and Object > Allowlist/Blocklist.

2. Beside Allowlists or Blocklists, click the menu icon and select the Manage lists by uploading files icon.
3. Select the list type from the dropdown menu:
l MD5
l SHA1
l SHA256
l Domain
l URL
l URL REGEX
4. Select the Action from the dropdown menu:

l Append: Add checksums to the list.
l Replace: Replace the list.
l Clear: Remove the list.
l Download: Download the list to the management computer.
l Delete: Delete an entry from the list if the entry is in the uploaded file.
5. If the action is Download, click OK to download the list file to the management computer.
6. If the action is Append or Replace, click Choose File, locate the checksum file on the management computer, then
click OK.
7. If the action is Clear, click OK to remove the list.
In a cluster setting, create allowlist and blocklist on the primary node. Lists are synchronized
with other nodes.
The total number of URL REGEXs in allowlist and blocklist must be less than 1000.
The total number of domains plus URLs in allowlist and blocklist must be less than 50000.
The total number of MD5+SHA1+SHA256 in allowlist and blocklist must be less than 50000.

Fortinet Inc.
Web Category
Go to Scan Policy and Object > Web Category to define specific URL categories as non-suspicious. URLs of these
categories will be treated as Clean. By default, the following categories are in the list:
l Abortion
l Advocacy Organizations
l Alcohol
l Alcohol and Tobacco
l Child Abuse
l Dating
l Discrimination
l Drug Abuse
l Explicit Violence
l Extremist Groups
l Gambling
l Grayware
l Hacking
l Homosexuality
l Illegal or Unethical
l Marijuana
l Nudity and Risque
l Occult
l Other Adult Materials
l Plagiarism
l Pornography
l Tobacco
l Weapons (Sales)
l Dynamic DNS
l Newly Registered Domain

Fortinet Inc.

Fortinet Inc.
Working Together With URL Pre-Filtering
By default, URL scanning is done inside a VM. However, if performance is a concern, users can turn on URL Pre-
Filtering.
When URL Pre-Filtering is enabled, it will work together with the Scan Profile settings and Web Category settings.
Scenarios
URL Sandboxing Pre-Filtering is Enabled
1. If the category or URL is Unrated, the URL will be scanned inside the VM.
2. If the URLs category falls into one defined in the Scan Policy and Object > Web Category page, but is not checked
as Benign, a job will be created and the URL will be rated as Suspicious (Low Risk, Medium Risk or High Risk
according to category).
3. If the URLs category falls into one defined in the Scan Policy and Object > Web Category page, but is checked as
Benign, a job will be created and the URL will be rated as Clean and will not be scanned inside the VM.
URL Sandboxing Pre-Filtering is Disabled
In this case, all URLs will be scanned inside the VM.
Customized Rating
Use the Customized Rating page to set verdicts for the following cases: VM Timeout, Tracer Engine Timeout,
Unextractable Encrypted Archive, and URL whose return code is not 200.
The following options can be configured:
VM Timeout Windows VM cannot be launched properly. This usually occurs on

FSA-VM model running on hardware with limited resources.
Select one of the following ratings:
l Unknown
l Clean
l Malicious
l Low Risk
l Medium Risk
l High Risk
Tracer Engine Timeout Tracer Engine is not working properly. For example, the malware
crashes the Windows VM or kills the Tracer Engine process. Thus,
the tracer log is not available.
l Unknown
l Clean
l Malicious
l Low Risk

Fortinet Inc.
l Medium Risk
l High Risk
Unextractable Encrypted Archive The archive file is password protected and cannot be extracted with a
predefined password list set in the Scan Policy and Object > General
Settings page.
l Unknown
l Clean
l Malicious
l Low Risk
l Medium Risk
l High Risk
URL whose return code is not 200 Block any URL sent to FortiSandbox which returns anything other
than 200 OK. You can disable this option by selecting Not Applied.
l Unknown
l Clean
l Malicious
l Low Risk
l Medium Risk
l High Risk
l Not Applied
YARA Rules
YARA is a pattern matching engine for malware detection. The YARA Rules page allows you to upload your own YARA
rules. The rules must be compatible with the 3.x schema and put inside ASCII text files.
FSA supports following Yara modules :
Cuckoo, Magic, Dotnet, PE, ELF, Hash, Math and Time.
Import Select to import a YARA rule file. You can apply one YARA rule to multiple file
types.
Edit Select to edit a YARA rule file. You can apply one YARA rule to multiple file types.
Delete Select to delete a YARA rule file.
Change Status Select to change the status (Active or Inactive) of a YARA rule.
Export Select to export a YARA rule file.

Fortinet Inc.
Name The name of the YARA rule set.
File Type The file types the YARA rule is applied to.
Modify Time The date and time the YARA rule set was last modified.
Size The size of the YARA rule file.
Sha256 The Sha256 checksum of the YARA rule file.
Status The current status (Active or Inactive) of the YARA rule set.
To upload YARA Rule File:
1. Go to Scan Policy and Object > YARA Rules.

2. Select Import.
YARA Rule Name Enter a name for the YARA rule set.
Default Description Enter a description of the YARA rule set.
Rules Risk Level Select a rule risk level between 1-10.

l 0-1: Clean
l 2-4: Low Risk
l 5-7: Medium Risk
l 8-10: High Risk
All the YARA rules inside the YARA rule file will share the same risk level.
File Type Select file types to scan against uploaded YARA rules. One YARA rule file can
be applied to multiple file types.
YARA Rule File Choose a text file containing YARA rules.
4. Select OK to import rules.

5. After a YARA Rule file is imported, you can select the Activate/Deactivate icon to enable/disable the YARA rule set.
If a file hits multiple rules, a complicated algorithm is used to calculate the final rating of the file.
For example, if a file hits more than one Low Risk YARA rules, the file's verdict can be higher
than the Low Risk rating.
To edit a YARA Rule set:

2. Select a YARA Rule.

Fortinet Inc.
ID YARA ID number. You cannot edit this field.
Yara Rule Name Enter a name for the YARA rule set.
Default Description Enter a description of the YARA rule set.
Rules Risk Level Select a rule risk level between 1-10.

l 0-1: Clean
l 2-4: Low Risk
l 5-7: Medium Risk
l 8-10: High Risk
All the YARA rules inside the YARA rule file will share the same risk level.
File Type Select file types to scan against uploaded YARA rules. One YARA rule file can be
applied to multiple file types.
YARA Rule File Choose a text file containing YARA rules.
5. Click OK to apply changes.
To delete a YARA rule set:

2. Select a YARA Rule set.
3. Click Delete from the toolbar.
4. Click Yes I'm sure button from the Are you sure? confirmation box.
To change the status of a YARA rule set:

2. Select a YARA Rule set.
3. Click Change Status.
The status of the selected YARA rule will switch to Active or Inactive depending on its previous status.
To import a process memory YARA Rule:
A process memory YARA Rule differs slightly from other YARA rules. It is used by the VM Engine and is only applied in
the VM Engine scan stage, whereas a regular YARA rule is applied in the Static Scan stage.
2. Click the Import button.
3. Input a YARA rule name in the Yara Rule Name field.
4. Add a description for the YARA Rule if there is no corresponding field contained in the rule's meta section.
5. In the Apply On: field, click Process Memory. The Rules Risk Level field will be hidden upon click because it is not
required for Process Memory.

Fortinet Inc.
6. Click Upload YARA File and select the YARA Rule file.

7. Click OK.
To verify when a sample is detected by a process memory YARA rule:
If a sample is detected by a process memory YARA rule, FortiSandbox will show the following information in the
FortiView job details:
l The Indicators section shows that the sample contains a suspicious pattern with the YARA rule name.
l The YARA rule and rating are displayed as Behaviors.
If a sample is detected by multiple process memory YARA rules,FortiSandbox shows all hits and takes the highest
scoring YARA rule as the final scan score if no other suspicious behavior is detected.

Fortinet Inc.
Format guidelines for process memory YARA Rules:
l A rule file must be in plain text format

l A rule file can contain many rules
l A rule name must be unique
l A rule should be in the following format:
rule Andromeda29_Memory_Pattern
{
meta:
description = "Andromeda29"
impact = 8
condition:
...
}
description: description of the rule, it will show in the indicator if matched
impact: the impact level of the pattern, range: 0-10, 0-1:clean,2-4: Low Risk,5-7:
Medium Risk,8-10:High Risk
To activate the process memory YARA Rule
1. Select the YARA Rule in Scan Policy and Object > Yara Rules, then click Change Status to activate the YARA rule.
Clicking the Change Status button again will toggle the Status between Active and Inactive.
To export a YARA rule:
1. From Scan Policy and Object > Yara Rules, click Export to export this YARA rule in plain text format.
Malware Package
Go to Scan Policy and Object > Malware Package, to view the Malware Package list.
Refresh Refresh the Malware Package list.
View Select a package version number and click the View button from the toolbar. The
following information is shown:
l Job Detail: View the file's detailed information. If the unit is joining a global
threat information sharing network, only local detection has the Job Detail
button available.

Fortinet Inc.
l Mark the detection as False Positive: If marked, the entry will be removed
from future Malware Packages. If the unit is joining a global threat information
sharing network, the change is also reported to the Collector and is shared by
all units in the network.
l Detected: The time and date that the item was detected.
l Checksum: The file checksum (SHA256).
l Rating: The risk rating.
l Serial Number: From which unit the threat information is from.
l Global/Local: If this threat information is from a local unit or from another unit.
Download SHA256 You have the option to download packages containing malware SHA256, SHA1,
Download SHA1 and MD5.
Download MD5
Version The malware package release version.
Release Time The malware package release time.
Total The total number of malware antivirus signatures inside the package. The
maximum number of signatures is 100K.
FortiSandbox only keeps malware packages generated in last 7 days.
URL Package
Go to Scan Policy and Object > URL Package to view the URL Package list.
Refresh Refresh the URL Package list.
View Select a package version number and click the View button from the toolbar. The
following information is shown:
l Job Detail: View the downloaded file's detailed information. If the unit is
joining a global threat information sharing network, only local detection has
the Job Detail button available.
l Mark the URL as False Positive: If marked, the URL will be removed from
future URL packages. If the unit is joining a global threat information sharing
network, the change is also reported to the Collector and is shared by all
units in the network. A new package will generate after removing the entry.
l Detected: The time and date that the item was detected.
l URL: The URL in the package.
l Rating: The risk rating of the downloaded file.

Fortinet Inc.
l Serial Number: From which unit the threat information is from.

l Global/Local: If this threat information is from a local unit, or from another
unit.
Download URL Download a text file which contains URLs in the package.
Version The URL package release version.
Release Time The URL package release time.
Total The total number of malware antivirus signatures inside the package. The
maximum number of signatures is 1000.
FortiSandbox only keeps URL packages generated in last 7 days.
Threat Intelligence
Threat Intelligence defines conditions to generate threat packages. If the unit joins the Global Threat Network, the page
will display: The unit has joined the threat information global network and is working as a contributor/collector. To
configure settings, please go to the Global Network page. The user should configure package conditions there.
Malware and URL Package Options
The malware package options allow you to configure how many days worth of data the malware packages save and the
malware ratings that are included in the packages.
In a cluster environment, only the primary node generates malware packages and URL packages.
You can also select to include files or URLs to packages during an On-Demand scan if their results meet package
settings.
Because of size limitations, the following limits are in effect:
l Malware packages can have a maximum of 100K entries.
l URL package can have a maximum of 1000 entries.
The URL package contains downloaded URLs of detected malware.
Local Malware Package Options
Include past __ day(s) of data. Enter the number of days. If the user changes the current days to a longer value,
(1-365 days) the unit will not go back to include historical data older than current days.
Include the job data of the

following ratings

Fortinet Inc.
Malicious Include malware with malicious ratings.

By default, only data with Malicious or High Risk rating will be included in the
Malware Package.
High Risk Include malware with high risk ratings and URLs sent by FortiMail devices of high
risk ratings and whose scan depth is 0.
Medium Risk Include malware with medium risk ratings and URLs sent by FortiMail devices of
medium risk ratings and whose scan depth is 0.
Local URL Package Option
Include past __ day(s) of data. Enter the number of days. If the user changes current days to a longer value, the
(1-365 days) unit will not go back to include historical data older than current days.

following ratings
Malicious Include downloaded URLs of malware with malicious ratings.

By default, only downloaded URLs of malware with a Malicious or High Risk rating
will be included in the URL Package.
High Risk Include downloaded URLs of malware with high risk ratings.
Medium Risk Include downloaded URLs of malware with medium risk ratings.
Enable STIX IOC Enable to generate STIX IOC packages.
STIX Malware Package Options
Include past __ day(s) of data. Enter the number of days.

(1-365 days)

following ratings
High Risk Include malware with high risk ratings.
Medium Risk Include malware with medium risk ratings.
Generate STIX file Include behavior information of each malware or suspicious URL.
with behaviour
Download STIX Download most recently generated Malware STIX IOC package.
STIX URL Package Options
Include past __ day(s) of data. Enter the number of days.

(1-365 days)

following ratings

Fortinet Inc.
High Risk Include downloaded URLs of malware with high risk ratings and URLs sent by
FortiMail devices of high risk ratings and whose scan depth is 0.
Medium Risk Include downloaded URLs of malware with medium risk ratings and URLs sent by
FortiMail devices of medium risk ratings and whose scan depth is 0.
Download STIX Download most recently generated URL STIX IOC package.
IOC Package
Indicator of Compromise (IOC), in computer forensics, is an artifact observed on a network or in an operating system
which indicates a computer intrusion. Typical IOCs are virus signatures and IP addresses, malware files or URLs MD5
hashes, or domain names of botnet command and control servers. In order to share, store and analyze in a consistent
manner, Structured Threat Information Expression (STIX™) is commonly adopted by the industry.
FortiSandbox supports IOC in STIX v1.2 format. Two types of IOC packages are generated:
1. A File Hash Watchlist package contains the Malware's file hash and is generated along with each Malware package.
If the malware is detected in local unit, behavioral information is also included. The most recent package can be
downloaded from Scan Policy and Object > Global Network or Scan Policy and Object > Threat Intelligence,
depending on if the unit joins a Global Threat Network.
2. A URL Watchlist package contains the Malware's download URL and is generated along with each URL Package. It
also contains URLs sent by FortiMail devices of suspicious ratings and whose scan depth is 0. The most recent
package can be downloaded from Scan Policy and Object > Global Network or Scan Policy and Object > Threat
Intelligence, depending on if the unit joins a Global Threat Network. Behavioral information is not included in URL
package.
The following is a example snippet of a File Hash Watchlist ICO package in STIX format:
<stix:STIX_Package
xmlns:FileObj="http://cybox.mitre.org/objects#FileObject-2"
xmlns:FortiSandbox="http://www.fortinet.com"
xmlns:cybox="http://cybox.mitre.org/cybox-2"
xmlns:cyboxCommon="http://cybox.mitre.org/common-2"
xmlns:cyboxVocabs="http://cybox.mitre.org/default_vocabularies-2"
xmlns:indicator="http://stix.mitre.org/Indicator-2"
xmlns:stix="http://stix.mitre.org/stix-1"
xmlns:stixCommon="http://stix.mitre.org/common-1"
xmlns:stixVocabs="http://stix.mitre.org/default_vocabularies-1"
xmlns:ttp="http://stix.mitre.org/TTP-1"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" id="FortiSandbox:Package-ba2ad205-
b390-40fd-96e4-44c2efaacab1" version="1.2">
<stix:STIX_Header/>
<stix:Indicators>
<stix:Indicator id="FortiSandbox:indicator-7d3e889e-957c-428c-9f68-8e48d3346316"
timestamp="2016-08-12T18:25:52.674621+00:00" xsi:type='indicator:IndicatorType'>
<indicator:Title>File hash for Suspected High Risk - Riskware</indicator:Title>
<indicator:Type xsi:type="stixVocabs:IndicatorTypeVocab-1.1">File Hash
Watchlist</indicator:Type>
<indicator:Observable id="FortiSandbox:Observable-723483db-a3e0-4de0-93cd-
5bd37b3c4611">
<cybox:Object id="FortiSandbox:File-3d9e7590-b479-4352-9a11-8fa313cee9f0">
<cybox:Properties xsi:type="FileObj:FileObjectType">
<FileObj:Hashes>
<cyboxCommon:Hash>

Fortinet Inc.
<cyboxCommon:Type xsi:type="cyboxVocabs:HashNameVocab-
1.0">SHA256</cyboxCommon:Type>
<cyboxCommon:Simple_Hash_Value
condition="Equals">0696e7ec6646977967f2c6f4dcb641473e76b4d5c9beb6
e433e0229c2accec5d</cyboxCommon:Simple_Hash_Value>
</cyboxCommon:Hash>
</FileObj:Hashes>
</cybox:Properties>
</cybox:Object>
</indicator:Observable>
<indicator:Indicated_TTP>
<stixCommon:TTP idref="FortiSandbox:ttp-afa9d28b-9602-4936-8b94-93e29cc8830c"
xsi:type='ttp:TTPType'/>
</indicator:Indicated_TTP>
</stix:Indicator>
</stix:Indicators>
<stix:TTPs>
<stix:TTP id="FortiSandbox:ttp-afa9d28b-9602-4936-8b94-93e29cc8830c" timestamp="2016-08-
12T18:25:52.674181+00:00" xsi:type='ttp:TTPType'>
<ttp:Title>Suspected High Risk - Riskware</ttp:Title>
<ttp:Behavior>
<ttp:Malware>
<ttp:Malware_Instance>
<ttp:Type xsi:type="stixVocabs:MalwareTypeVocab-1.0">Exploit Kits</ttp:Type>
<ttp:Name>Suspected High Risk - Riskware</ttp:Name>
</ttp:Malware_Instance>
</ttp:Malware>
</ttp:Behavior>
</stix:TTP>
</stix:TTPs>
</stix:STIX_Package>
If the IOC package includes behavior information, it can be very large.
Global Network
FortiSandbox can generate antivirus database packages (malware packages) and add URL packages from scan results
into the blocklist, and distribute them to FortiGate devices and FortiClient endpoints for antispyware/antivirus scan and
web filtering extension to block and quarantine malware.
This feature requires that:
l The FortiGate device, running FortiOS 5.4 or later, is authorized on the FortiSandbox.
l The FortiClient endpoint is running version 5.4 or later and has successfully connected to the FortiSandbox, and
l FortiSandbox is running version 2.1 or later.
FortiGate or FortiClient sends a malware package request to FortiSandbox every two minutes that includes its installed
version (or 0.0, if none exists). The FortiSandbox receives the request then compares the version with the latest local
version number. If the received version is different, FortiSandbox sends the latest package to the FortiGate or
FortiClient. If the versions are the same, then FortiSandbox will send an already-up-to-date message.

Fortinet Inc.
Multiple FortiSandbox units can work together to build a Global Threat Network to share threat information. One unit
works as a Collector to collect threat information from other units while other units work as Contributors to upload locally
detected threat information to the Collector, then download a full copy. A new package is generated on a unit when:
l The FortiSandbox has a new malware detection, either from local detection, or detected on another unit inside the
Global Threat Network, whose rating falls into configured rating range.
l Malware in the current malware package is older than the time set in the malware package configuration.
l The malware package generation condition is changed in the configuration page.
l The malware's rating has been overwritten manually.
The Collector can also manage the Scan Profile of all units in the network. However, only a standalone unit or primary
node in a cluster can join the network.
To join the global network to share threat information and scan profiles:
1. Go to Scan Policy and Object > Global Network.

2. Enable Join global network to share threat information and manage scan profiles.
3. You have the following two options:
a. Work as threat information collector and scan profile manager.
If the unit works as a Collector, configure the following:
Alias Enter the network Alias name.
Authentication Code Enter the authentication code for Contributor to join the network.
Contributors List the units who are in the network.
Local Malware Package These options define how each unit generates local packages after it has
Options threat information. For more information, see Threat Intelligence on page
130.
Local URL Package Options
Enable Local STIX IOC

Package
b. Work as threat information contributor. Scan profile is managed by manager.

If the unit works as a Contributor, configure the following:
Collector IP Address Enter the Collector's IP address.
Alias Enter the global network Alias name.
Authentication Code Enter the authentication code to join the network.
Local Malware Package These options define how each unit generates local packages after it has
Options threat information. For more information, see Threat Intelligence on page
130.
Local URL Package Options
Enable Local STIX IOC

Package

Fortinet Inc.
Scan Profile is Managed by By enabling this option, the unit can choose to allow its scan profile to be
Manager managed by the Collector. The Collector will combine all VM types from the
Contributors. After you configure a scan profile on the Collector, the
configurations will be downloaded by each Contributor.
A unit can join global threat network as Contributor to allow the Collector to
control its Scan Profile, or it can work as Collector to manage Scan Profile
of all units in the network. Only a standalone unit or primary node in a
cluster can join the network.
4. Click OK to save the settings.
When the Contributor’s scan profile is managed by the Collector, the Collector must have
network access to the Contributor’s HTTPS port, which is port 443.

Fortinet Inc.
System
Use the System pages to manage and configure the basic system options for the FortiSandbox unit. This includes
administrator configuration, mail server settings, and maintenance information.
System provides access to the following pages. Some pages do not display on worker nodes in a cluster.
Administrators Configure administrator user accounts.
Admin Profile Configure user profiles to define user privileges.
Device Groups Add devices to a device group and assign it to multiple device users.
Certificates Configure CA certificates.
LDAP Servers Configure LDAP Servers.
RADIUS Servers Configure RADIUS Servers.
Mail Server Configure the Mail Server.
SNMP Configure SNMP.
FortiGuard Configure FortiGuard.
Login Disclaimer Configure the Login Disclaimer.
Settings Configure the idle timeout, the GUI language, and whether the left menu is
expanded or compact. You can also reset all widgets to their default state.
Job View Settings Define columns and orders of job result tables.
Event Calendar Settings Define what kind of events to display in Event Calendar page.
Administrators
Use the Administrators menu to configure administrator user accounts.

Users whose Admin Profile does not have Read Write privilege under System > Admin Profiles can only view and edit
their own information.
Only the default admin account can see and access that account. Other users cannot see the default admin account in
the GUI.
Create New Create a new administrator account.
Edit Edit the selected administrator account.
Delete Delete the selected administrator account.

Fortinet Inc.
System
Test Login Test the selected LDAP/RADIUS administrator account's login settings. A
detailed debug message display any errors.
Name Administrator account name.
Type Administrator type:

l Local
l LDAP
l RADIUS
l LDAP WILDCARD
l RADIUS WILDCARD
Profile The Admin Profile the user belongs to.
To create a new user:
1. Log in as a user whose Admin Profile has Read/Write privileges under System > Admin Profiles, and go to System >
Administrators.

Fortinet Inc.
System
3. Configure the following and click OK.
Administrator Name of the administrator account. The administrator name must be 1 to

30 characters using uppercase letters, lowercase letters, numbers, or the
underscore character (_).
Password, Confirm Password This field is only available when Type is Local.
Password of the account. The password must be 6 to 64 characters using
uppercase letters, lowercase letters, numbers, or special characters.
Email Address Email address for contact information.
Phone Number Phone number for contact information. Phone number must start with +1.
Admin Profile Select the Admin Profile for the user: Super Admin, Read Only, or Device.
Assigned Devices Assign devices and/or VDOMs/Protected Domains to the user. This
applies if you enable Device User.
Click in the Assigned Devices box to display the Available Devices panel
which lists all available devices and VDOMs/Protected Domains. Use this
panel to select or add devices.
Type Select administrator type.
LDAP When Type is LDAP, select the LDAP Server. For more information, see
LDAP Servers on page 151.
RADIUS When Type is RADIUS, select the RADIUS Server. For more information,
see RADIUS Servers on page 153.
LDAP WILDCARD When Type is LDAP WILDCARD, select the LDAP Server. The
Administrator is LDAP_WILDCARD and cannot be edited. For more
information, see Wildcard Admin Authentication on page 142.
RADIUS WILDCARD When Type is RADIUS WILDCARD, select the Radius Server. The
Administrator is RADIUS_WILDCARD and cannot be edited. For more
information, see Wildcard Admin Authentication on page 142.
Device User Enable this option to assign devices to the user. When the user logs in,
only jobs belonging to the assigned devices or VDOMs/Protected
Domains are visible.
You can create device groups in System > Device Groups and then
assign them to a device user.
You can also assign devices on the fly by selecting self assigned in the
Device Group dropdown list.
Two-factor Authentication When administrator Type is Local, you can use two-factor authentication.
Select an Authentication Type of Email, SMS, or FTM (FortiTokenMobile).
Two-factor Authentication is only available for FortiSandbox appliances
and FortiSandbox VMs with a serial number starting with FSA-VM0T.
Default On-Demand Submit This option is available to administrators whose Administrator Profile >
settings Scan Job has Read Write access.

Fortinet Inc.
System
Use this option to set the default settings in Scan Job > File On-Demand
and URL On-Demand. Each administrator can have their own default
settings.
For information on these settings, see File On-Demand on page 81 and
URL On-Demand on page 85.
Restrict login to trusted host Expand to configure trusted hosts.
Trusted Host 1, Enter up to three IPv4 trusted hosts. Only users from trusted hosts can
Trusted Host 2, access FortiSandbox.
Trusted Host 3
Trusted IPv6 Host 1, Enter up to three IPv6 trusted hosts. Only users from trusted hosts can
Trusted IPv6 Host 2, access FortiSandbox.
Trusted IPv6 Host 3
Comments Optional description comment for the administrator account.
Language GUI language for the user: English, Japanese, or French.
Setting trusted hosts for administrators limits which computers an administrator can log
into from FortiSandbox. When you configure a trusted host, FortiSandbox only accepts the
administrator’s login from the configured IP address or subnet. Any attempt to log in with
the same credentials from any other IP address or any other subnet are dropped.
To edit a user account:
1. Login as an user whose Admin Profile has Read/Write privileges under System > Admin Profiles, and go to System
> Administrators.
2. Select the user you want to edit and click Edit.
Only the admin account can edit its own settings.
When editing the admin account, you must enter the old password before you can set a new password.
3. Edit the account and then retype the new password in the confirmation field.
4. Click OK.
To test LDAP/RADIUS user login:
1. Login as an user whose Admin Profile has Read/Write privileges under System > Admin Profiles, and go to System
> Administrators.
2. Select an LDAP/RADIUS user to test.
3. Click Test Login.
4. In the dialog box, enter the user's password.
5. Click OK.
If an error occurs, a detailed debug message appears.
When a remote RADIUS server is configured for two-factor authentication, RADIUS users

must enter a FortiToken pin code or the code from email/SMS. For example, after the user
clicks Login, the user must enter the code, and click Submit to complete the login.
A pin code is also needed to test login.

Fortinet Inc.
System
Admin Profiles
Administrator profiles are used to control administrator access privileges to system features. Profiles are assigned to
administrator accounts when an administrator is created.
There are three predefined administrator profiles, which cannot be modified or deleted:
l Super Admin: All functionalities are accessible.
l Read Only: Can view certain pages but cannot change any system setting.
l Device: Can view certain pages about assigned devices, but cannot change any system setting.
All previous created users in earlier builds are mapped to these three default profiles.
Only the Super Admin user can create, edit, and delete administrator profiles and new users if the user is assigned Read
Write privilege in System > Admin.
Read Write User can view and make changes to the system.
Read Only User can only view information.
None User cannot view or make changes to the system.

Fortinet Inc.
System

Fortinet Inc.
System
In the Control Access section:

l Enable Download Original File to download the original file from the Job Detail page.
l Enable Allow On-Demand Scan Interaction to use VM interaction during the On-Demand scan or take scan
snapshots in the VM Status page.
l Enable Allow On-Demand Scan Video Recording to take a video during the On-Demand scan and watch it later in
the On-Demand page.
Wildcard Admin Authentication
You can use wildcard admin authentication to add the RADIUS and LDAP accounts of a group to FortiSandbox all at
once instead of adding each account individually.
To add accounts on a RADIUS server:
This example uses FortiAuthenticator as the RADIUS server.

1. On FortiAuthenticator, create the users.
2. If required, create user groups and assign users to the groups.
l To specify which devices the users have access to, you can define the group's Attribute ID as Fortinet-Group-
Name, and enter a device group name as listed in FortiSandbox as the Value. This allows users in this group to
view jobs only from the devices inside of that device group.
l If the Attribute ID is not defined, when users log into FortiSandbox, device visibility will follow the device group
assigned to the RADIUS_WILDCARD administrator, if any exists.

Fortinet Inc.
System
3. Create a new RADIUS service client.

a. Set the client address as the FortiSandbox IP address.
b. Enter the secret key in the Secret field.
c. Configure profiles and add the user groups whose users will log into the FortiSandbox.
4. On FortiSandbox, set up the RADIUS server in System > RADIUS Servers.

See RADIUS Servers on page 153.
5. Create a new administrator in System > Administrators.
a. Select RADIUS WILDCARD as the type.
b. Select the RADIUS Server created in the previous step.
c. The administrator name is RADIUS_WILDCARD and it cannot be changed. The administrator can be a device
user, however, the assigned device group will be overridden if the RADIUS user group has defined the Attribute
ID as Fortinet-Group-Name.
To add accounts on an LDAP server:
1. On the FortiSandbox, set up the LDAP server in System > LDAP Servers.
See LDAP Servers on page 151.
In this example, all users from OU=HQ under the LDAP tree dc=example, dc=org will be able to log into
FortiSandbox.

Fortinet Inc.
System
2. Create a new administrator in the System > Administrators.

a. Select LDAP WILDCARD as the Type.
b. Select the LDAP server from the previous step.
The administrator name is LDAP_WILDCARD and it cannot be changed.
c. Click OK.
Device Groups
To simplify the process of assigning devices to users, administrators can add devices to a device group and assign the
group to multiple users. Once created, the device group is selectable when modifying an existing user or creating a new
device user. When the user logs in, they can only view jobs from the devices included in that device group.
Device groups cannot be deleted while in use by any device user.
To create a device group:
1. Go to System > Device Groups and click Create New.

2. Enter a group name.
3. Enter a comment to identify this device group if required.
4. Select the devices to be included in the device group.
5. Click Save.
The device group is now available to select when modifying or creating a new administrator with device user
privileges enabled.
Device groups are also used in LDAP/RADIUS wildcard authentication.

See Wildcard Admin Authentication on page 142.
Interfaces
To view and manage interfaces, go to System > Interfaces.

This page displays the following information and options:
Interface The interface name and description, where applicable.

The failover IP includes the description: (cluster external port).
port1 port1 is hard-coded as the administration interface. You can enable or disable HTTP,
(administration SSH, or Telnet access rights on port1. HTTPS is enabled by default. You can use
port) port1 for Device mode, although a different, dedicated port is recommended.

Fortinet Inc.
System
port2 You can use port2 for Sniffer mode, Device mode, or inter-node communication
within a cluster.
port3 (VM outgoing port3 is reserved for outgoing communication triggered by the execution of the files
interface) under analysis.
FortiSandbox uses port3 to allow scanned files to access the Internet. The Internet
visiting behavior is an important factor to determine if a file is malicious. As malicious
files are infectious, ensure that the connection for port3 is isolated but can also
access the Internet. Do not allow this connection to belong to or be able to access
any internal subnet that needs to be protected. Fortinet recommends placing this
interface on an isolated network behind a firewall.
FortiSandbox VM accesses external networks through port3. Configure the next hop
gateway and DNS settings in Scan Policy and Object > General Settings > Allow
Virtual Machines to access external network through outgoing port3. This allows files
running inside VMs to access the external network. One special type of outgoing
communication from a guest VM is to connect to the Microsoft activation server to
activate the Windows Sandbox VM product keys. Office licenses are verified through
VM machines so internet access via port3 is required to contact Microsoft for license
activation.
If the VM cannot access the outside network, a simulated network (SIMNET) starts by
default. SIMNET provides responses to popular network services like http where
some malware is expected. If the VM internet access is down, the SIMNET status is
displayed beside the down icon. Click that icon to go to the VM network configuration
page.
SIMNET is not a real internet. This can affect catch rate. Do not
use an IP address from the production IP pool for the IP
assignment on port3 because it might get put on the blocklist.
port4 You can use port4 for Sniffer mode, Device mode, or inter-node communication
within a cluster.
port5/port6 You can use port5 and port6 for Sniffer mode, Device mode, or inter-node
communication within a cluster.
On FortiSandbox 2000E and 3000E devices, port5 and port6 are 10G fiber ports. We
recommend using these ports on a primary or secondary node as communications
ports with cluster workers.
port7/port8 You can use port7 and port8 for Sniffer mode, Device mode, or inter-node
communication within a cluster.
IPv4 IPv4 IP address and subnet mask of the interface.
IPv6 IPv6 IP address and subnet mask of the interface.
Interface Status State of the interface:

l Interface is up
l Interface is down
l Interface is being used by sniffer
Link Status Link status:

Fortinet Inc.
System
l Link up
l Link down
Access Rights Access rights associated with the interface. HTTPS is enabled by default on port1
and any other administrative port set by the CLI command set admin-port. You
can select to enable HTTP, SSH, and Telnet access on the administrative port.
PCAP Click the PCAP icon to sniff the traffic of an interface for up to 60 seconds. Click
Capture & Download to download the PCAP file as a zip file. Maximum file size is
100MB file size.
You can define the tcpdump filter such as host 172.10.1.1 or TCP port 443.
You can only run one capture at a time for each port. Sniffing ports are combined and
treated as a single port.
Create New Create an interface.
Edit Edit the selected interface.
For more information on FSA-2000E and FSA-3000E ports, see Default port information on page 12.
To set up more administration ports, use the CLI command set admin-port.
The following subnets are reserved by FortiSandbox. Do not configure interface IP addresses in this range.
192.168.56.0/24
192.168.57.0/24
192.168.250.0/24
Edit an interface
Do not change settings on an interface used for sniffing traffic.
To edit an IPv4 or IPv6 address:
1. Go to System > Interfaces.
2. Select an interface and click Edit.
3. Edit the IP address.
4. To change the Interface Status, click its icon.
5. Click OK.
Edit administrative access
Administrative access rights can only be set on port1. All other administrative ports follow port1 settings.
The port1 interface or any other administrative port set through the CLI command set admin-port is used for
administrative access to FortiSandbox. HTTPS is enabled by default. You can edit this interface to enable HTTP, SSH,
and Telnet support.

Fortinet Inc.
System
To edit administrative access:
1. Go to System > Interfaces.
2. Select an administrative interface and click Edit.
3. Edit the IP address.
4. To change the Interface Status, click its icon.
5. Select the Access Rights for HTTP, SSH, and Telnet.
6. Click OK.
Create an aggregate interface
You can create an interface that uses IEEE 802.3ad to bind multiple physical networks to form an aggregated, combined
link. The aggregate link has the bandwidth of the combined links. If one interface in the group fails, traffic is automatically
transferred to the other interfaces. The only noticeable effect is reduced bandwidth.
In System > Interfaces, a network interface that is part of an aggregate link is displayed in gray. You cannot configure the
interface individually.
A network interface must meet all the following conditions to be added to an aggregate interface:
l It is not already part of an aggregate interface.
l It does not have the same IP address as another interface.
l It is not an administration port.
l It is not a VM outgoing port.
l It is not a sniffer port.
l It is not an HA-Cluster communication port.
To create an aggregate interface:
This example creates an aggregate interface on ports 4 - 6 with an internal IP address of 10.1.1.123 with administrative
access to HTTPS and SSH.
1. Go to System > Interfaces and click Create New.
FortiSandbox sets the Name as bond{n} and the Type as 802.3ad Aggregate.
2. For Interface Member, select the physical interface members. In this example, select ports 4, 5, and 6.
3. Enter the IPv4 IP address for the port. In this example, enter 10.1.1.123/24.

Fortinet Inc.
System
4. If necessary, enter the IPv6 IP address.
5. Click OK to display the created bond.
6. Use the CLI command show to display the bond information. For example:
Bond 1 IPv4 IP: 10.1.1.123/24 MAC: xx:xx:xx:xx:xx:xx
MTU: 1500
Slave Interface: port4 port5 port6
7. Use the following CLI command to add bond1 as the administration port.
set admin-port bond1
System > Interfaces shows that bond1 has the same access rights as port1.
When you change the port1 access rights, the bond1 access right is automatically synchronized.
To set the aggregate interface as the administration port, use the CLI command set admin-port bond1.
To change the MTU of an aggregate interface, use the set port mtu CLI command. For example, set port-mtu
bond1 1200.

Fortinet Inc.
System
Additional information
There is no CLI command to create or delete the LACP 802.3ad interface.

The bond interface does not support PCAP.
You cannot delete an admin LACP bond.
You cannot add a new interface to an existing bond.
You cannot remove an interface member from an existing bond.
For FortiSandbox VM, including KVM, Hyper-V, AWS, and Azure, implement the LACP support on the virtual server first,
then create the aggregate interface.
Failover IP
Users are able to configure a cluster level failover IP, which will be set only on primary node. This failover IP can only be
set on current primary node through the CLI. It should be in the same subnet of the port’s local IP. Clients, such as
FortiGates, should point to the failover IP in order to use the HA functionality. When a failover occurs, failover IP will be
applied on new primary node.
The primary and secondary node local IP will be kept locally during failover.
Example:
Here is an example to set a failover IP for port1.

> show
Configured parameters:
Port 1 IPv4 IP: 172.16.69.145/24 MAC: 14:18:77:52:37:72
Port 1 IPv6 IP: 2620:101:9005:69::145/64 MAC: 14:18:77:52:37:72
Port 2 IPv4 IP: 1.1.7.5/24 MAC: 14:18:77:52:37:73
Port 3 IPv4 IP: 192.168.199.145/24 MAC: 14:18:77:52:37:74
IPv4 Default Gateway: 172.16.69.1
> hc-settings -sc -tM -n145 -cdemo-cluster -p1234 -iport2
The unit was successfully configured.
> hc-settings -si -iport1 -a172.16.69.160/24
The external IP address 172.16.69.160 for cluster port1 was set successfully
> hc-settings -l
SN: FSA3KE3R17000243
Type: Master
Name: 145
HC-Name: demo-cluster
Authentication Code: 1234
Interface: port2
Cluster Interfaces:
port1: 172.16.69.160/255.255.255.0

Fortinet Inc.
System
DNS Configuration
The primary and secondary DNS server addresses can be configured from System > DNS. FortiSandbox is configured
to use the FortiGuard DNS servers by default.
Static Route
Use this page to manage static routes on your FortiSandbox device. Go to System > Static Route to view the routing list.
Create New Select to create a new static route.
Edit Select a static route in the list and click Edit in the toolbar to edit the entry.
Delete Select a static route in the list and click Delete in the toolbar to delete the entry.
IP/Mask Displays the IP address and subnet mask.
Gateway Displays the gateway IP address.
Device Displays the interface associated with the static route.
Number of Routes Displays the number of static routes configured.
To create a new static route:
1. Click Create New from the toolbar.

2. Enter a destination IP address and mask, and a gateway, in their requisite fields.
The destination IP/Mask can be entered in the format 192.168.1.2/255.255.255.0,

192.168.1.2/24, or fe80:0:0:0:0:0:c0a8:1fe.
The following subnets are reserved for use by FortiSandbox. Do not configure static routes
for these IP address ranges:
l 192.168.56.0/24
l 192.168.57.0/24
l 192.168.250.0/24
3. Select a device (or interface) from the dropdown list.

4. Click OK to create the new static route.
To edit a static route:
1. Select a Static Route.

2. Click the Edit button.
3. Edit the destination IP address and mask, gateway, and device (or interface) as required.
4. Click OK to apply the edits to the static route.

Fortinet Inc.
System
To delete a static route or routes:
1. Select one or more Static Routes.

3. Select Yes, I’m sure on the confirmation page to delete the selected route or routes.
Static route entries defined in this page are for system use and are not applied to traffic
originating from the guest VM during a file's execution.
LDAP Servers
The FortiSandbox system supports remote authentication of administrators using LDAP servers. To use this feature,
configure the server entries in the FortiSandbox unit for each authentication server in your network.
If you have configured LDAP support and require a user to authenticate using an LDAP server, the FortiSandbox unit
contacts the LDAP server for authentication. To authenticate with the FortiSandbox unit, the user enters a user name
and password. The FortiSandbox unit sends this user name and password to the LDAP server. If the LDAP server can
authenticate the user, the FortiSandbox unit accepts the connection. If the LDAP server cannot authenticate the user,
the FortiSandbox unit refuses the connection.
Create New Add an LDAP server.
Edit Edit the selected LDAP server.
Delete Delete the selected LDAP server.
Name LDAP server name.
Address LDAP server IP address.
Common Name LDAP common name.
Distinguished Name LDAP distinguished name.
Bind Type LDAP bind type.
Connection Type LDAP connection type.

Fortinet Inc.
System
To create a new LDAP server:
1. Go to System > LDAP Servers.

3. Configure the following settings and then click OK.
Name LDAP server name. Use a name unique to FortiSandbox.
Server Name/IP LDAP server IP address or fully qualified domain name.
Port Port for LDAP traffic. LDAP default port is 389. LDAPS default port is 636.
Common Name Identifier LDAP common name. Most LDAP servers use cn. Some servers use other
common name identifiers such as uid.
Distinguished Name LDAP distinguished name used to look up entries on the LDAP server. The
distinguished name reflects the hierarchy of LDAP database object classes
above the common name identifier. For example, you can follow the format
CN=Users,DC=Example,DC=Com.
Bind Type LDAP bind type for authentication, including:

l Simple
l Anonymous
l Regular
Username If Bind Type is Regular, enter the user distinguished name.
Password If Bind Type is Regular, enter the password.
Secure Connection LDAP connection type.
Protocol If Secure Connection is enabled, select LDAPS or STARTTLS.
CA Certificate If Secure Connection is enabled, select the CA certificate.
Advanced Options Expand to configure advanced options.

Fortinet Inc.
System
Attributes Attributes such as member, uniquemember, or memberuid.
Connect timeout Connection timeout in milliseconds. Default is 500.
Filter Filter in the format such as (&(objectClass=*).
Group Name of the LDAP group. For example, you can follow the format
CN=Group1,DC=Example,DC=Com.
Memberof-attr Specify the value for this attribute. This value must match the attribute of the
group in LDAP server. All users of the LDAP group with the attribute matching
the memberof-attr inherit the administrative permissions of the group.
Profile-attr Specify the attribute for this profile.
Secondary-server Specify a secondary server for failover in case the primary LDAP server fails.
The Distinguished Name must be the same.
Tertiary-server Specify a tertiary server for failover in case the primary and secondary servers
fail. The Distinguished Name must be the same.
RADIUS Servers
The FortiSandbox system supports remote authentication of administrators using RADIUS servers. To use this feature,
you must configure the appropriate server entries in the FortiSandbox unit for each authentication server in your
network.
If you have configured RADIUS support and require a user to authenticate using a RADIUS server, the FortiSandbox unit
contacts the RADIUS server for authentication. To authenticate with the FortiSandbox unit, the user enters a user name
and password. The FortiSandbox unit sends this user name and password to the RADIUS server. If the RADIUS server
can authenticate the user, the FortiSandbox unit successfully authenticates the user. If the RADIUS server cannot
authenticate the user, the FortiSandbox unit refuses the connection.
Create New Select to add a RADIUS server.
Edit Select a RADIUS server in the list and click Edit in the toolbar to edit the entry.
Delete Select a RADIUS server in the list and click Delete in the toolbar to delete the entry.
Name The RADIUS server name.
Primary Address The primary server IP address.
Secondary Address The secondary server IP address.
Port The port used for RADIUS traffic. The default port is 1812.
Auth Type The authentication type the RADIUS server requires. The default setting of ANY has the
FortiSandbox try all the authentication types. Select ANY, PAP, CHAP, or MSv2.

Fortinet Inc.
System
To add a RADIUS server:
1. Go to System > RADIUS Servers.

2. Select Create New from the toolbar.
Name Enter a name to identify the RADIUS server. The name should be unique to
FortiSandbox.
Primary Server Name/IP Enter the IP address or fully qualified domain name of the primary RADIUS
server.
Secondary Server Name/IP Enter the IP address or fully qualified domain name of the secondary RADIUS
server.
Port Enter the port for RADIUS traffic. The default port is 1812.
Auth Type Enter the authentication type the RADIUS server requires. The default setting
of ANY has the FortiSandbox try all the authentication types. Select one of:
ANY, PAP, CHAP, or MSv2.
Primary Secret Enter the primary RADIUS server secret.
Secondary Secret Enter the secondary RADIUS server secret.
NAS IP Enter the NAS IP address.
4. Select OK to add the RADIUS server.
FortiSandbox supports the shared RADIUS secret key up to a maximum of 16 characters in

length, the same as FortiOS.

Fortinet Inc.
System
Mail Servers
The Mail Server page allows you to adjust the mail server settings. Go to System > Mail Server to view the Mail Server
Settings page. Use this page to configure notifications for malware detected as well as the weekly report global email list.
SMTP Server Address Enter the SMTP server address.
Port Enter the SMTP server port number.

If you use port 587, the SMTP process uses STARTTLS to
encrypt the credentials and the email.
E-Mail Account Enter the mail server email account. This is the From address.
Login Account Enter the mail server login account.
Confirm Password Confirm the password.
Send a notification email to the global email list Select to enable this feature. When enabled, a notification
when Files/URLs with selected rating are email is sent to the global email list, individual device, and
detected VDOM/Domain email address when malware is detected.
Global notification mail receivers Enter the email addresses that comprise the global email list.
list (separated by comma)
What rating of job to send alert Select the rating of jobs that are included in the email alerts.
email Options include: Malicious, High Risk, Medium Risk, and Low
Risk.
Notification mail subject Enter the subject line for the notification emails.
template
Send a notification email to the When a malware from an input device is detected, send a
Device/Domain/VDOM email list when notification email to its admin email address.
Files/URLs with selected ratings are detected
What rating of job to send alert Select the rating of jobs that will trigger email notification.
email Options include: Malicious, High Risk, Medium Risk, and Low
Risk.
Notification mail subject Enter the subject line for the notification emails.
template
Send a notification email to the email list when When enabled, a notification email is sent to an email list when
malicious/suspicious verdict is returned to a malicious/suspicious rating is retrieved by a client device.
client device
Use FQDN as unit address for job detail link Use FQDN instead of port1 IP for a job detail link inside alert
(default is IP address of Port1) emails and reports.
FQDN Name Enter FQDN name.

Fortinet Inc.
System
Send scheduled system resource status report When a VM is near the custom threshold, send a usage status
to the email list email to the admin email address.
System status email receivers Enter the email addresses to get the status email.
list (separated by comma)
Send alert email when: CPU Usage >: Customize threshold of CPU usage.
RAM Usage >: Customize threshold of RAM usage.
Disk Usage >: Customize threshold of Disk usage.
Ramdisk Usage: Customize threshold of VM usage.
Total Pending Jobs: Customize threshold of total pending
jobs.
Average Scan Time: Customize threshold of average scan
time.
System check every (minutes): Customize system check
schedule.
Send scheduled PDF report to global email Select to send a report email to the global email list.
receiver
Global email list to receive Enter the email addresses that comprise the global email list.
scheduled summary/detail report
(separated by comma)
Send scheduled PDF report to Select to send PDF report to device/Protected Domain/VDOM
Device/Domain/VDOM email address email address also. The report will only contain jobs sent from
the device/FortiMail Protected Domain/VDOM.
Report Schedule Type: Select the report schedule type: Hourly, Daily, or Weekly.
For different schedule types, different frequency options are
displayed. If the schedule type is Daily, the user can set the
hour for which the report is generated.
Week Day: Select the day the report is to be sent.
At hour: Select the hour interval the report is to be sent.
Include job data before Days (0- Select the job data before 0-28 days.
28) days:
Hours (0-23): Select the job data before 0-23 hours.

For example, if the user wants to include job data from the last
two days and three hours before report generation, the user
should select two in the Day Field and three in the Hour field.
What rating of job to be included Select the rating of jobs that are included in the reports.
in the detail report Options include: Malicious, High Risk, Medium Risk, and Low
Risk.
OK Click OK to apply any changes made to the mail server

configuration.
Send Test Email Click Send Test to send a test email to the global email list.

Fortinet Inc.
System
If an error occurs, the error message will appear at the top of

the page and recorded in the System Logs.
Restore Default Click Restore Default to restore the default mail server settings.
FortiGuard
Go to System > FortiGuard to view the FortiGuard page.

The following options and information are available:
Module Name FortiGuard module name such as AntiVirus Scanner, AntiVirus Extreme Signature,
AntiVirus Active Signature, AntiVirus Extended Signature, Network Alerts Signature,
Sandbox System Tools, Sandbox Rating Engine, Sandbox Tracer Engine, Android
Tracer Engine, Linux Tracer Engine, Industry Security Signature, and Traffic Sniffer.
All modules automatically install update packages when they are available on FDN.
Current Version Current version of the module.
Last Check Time Date and time that module last checked for an update.
Last Update Time Date and time that module was last updated.
Last Check Status Status of the last update attempt.
Upload Package File Click Choose File to select a package file on the management computer, then click
Submit to upload the package file to FortiSandbox.
If the unit has no access to Fortinet FDN servers, go to the Customer Service and
Support site to download package files manually.
FortiGuard Server Location Select FDN servers for package update and Web Filtering query. The default
selection is Nearest which is the FDN server nearest the unit's time zone. Selecting
US Region means using only servers in the USA. Selecting Global means using
global FDN servers via secure connection via HTTPS port 443 to do FDN update.
FortiGuard Server Settings
Use override FDN Enable this option to use an override FDN server or FortiManager to download
server to download module updates. Enter the override server IP address or FQDN in the text box.
module updates Enabling this option disables FortiGuard Server Location.
Click Connect FDN Now to schedule an immediate update check.
Use Proxy Enable this option to use a proxy. Configure the Proxy Type (HTTP Connect,
SOCKS v4, or SOCKS v5), Server Name/IP, Port, Proxy Username, and Proxy
Password.
Connect FDN Now Click Connect FDN Now to connect to the override FDN server/proxy.
FortiGuard Web Filter Settings

Fortinet Inc.
System
Secure Connection FortiSandbox supports secure XOR encrypted connection for FortiGuard web filter
settings. When enabled, the system uses secure XOR encrypted mode for the
connection.
Use override Enable this option to use an override server address for web filtering query using the
server for web server IP address or FQDN in the text box.
filtering query The default is the web filtering server nearest the unit's time zone.
Use Proxy Enable this option to use a proxy. Configure the Socks5 Server Name/IP, Port, Proxy
Username, and Proxy Password.
VM Image Download Proxy Settings
Use Proxy Enable this option to use a proxy. Configure the Proxy Type (HTTP Connect,
SOCKS v4, or SOCKS v5), Server Name/IP, Port, Proxy Username, and Proxy
Password.
FortiSandbox Community Cloud & Threat Intelligence Settings
Use override Enable this option when using FortiManager for FortiGuard upgrades in your
server for environment.
community cloud When using FortiManager for FortiGuard upgrades, only verdict information is
server query available for malware. The malware's behavior information is not available.
Use Proxy Enable this option to use a proxy. Configure the Socks5 Server Name/IP, Port, Proxy
Username, and Proxy Password.
FortiSandbox WindowsCloud VM Settings
Server Regions This option requires a Windows Cloud VM contract.

Select the region where Windows Cloud VMs are used to scan files.
You can override the APT server and manually enter the IP address of the APT
server which hosts the Windows Cloud VM.
Certificates
In this page you can import, view, download and delete certificates. Certificates are used for secure connection to an
LDAP server, system HTTPS and SSH services. The FortiSandbox has one default certificate firmware which means the
certificate is installed on the unit by Fortinet.
FSA does not support generating certificates, but importing certificates for SSH and HTTPS
access to FSA..crt, PKCS12, and .pem formats are supported.
Import Import a certificate.
Service Select to configure specific certificates for the HTTP and SSH servers.

Fortinet Inc.
System
View Select a certificate in the list and select View in the toolbar to view the CA certificate
details.
Delete Select a certificate in the list and select Delete in the toolbar to delete the certificate.
Name The name of the certificate.
Subject The subject of the certificate.
Status The certificate status, active or expired.
Service HTTPS or SSH service that is using this certificate.
Certificate Download the server certificate.
Sub Certificate Download the intermediate CA (Certificate Authority) certificate if you are using a
certificate chain.
Cacert Download the CA (Certificate Authority) certificate.
To import a certificate:
1. Go to System > Certificates.
2. Click Import from the toolbar.
3. Enter the certificate name in the text field.
4. Click Choose File and locate the certificate and key files on your management computer.
5. Optionally, you can import the intermediate CA certificate by clicking the Choose File button for Sub Certificate, and
locating the intermediate CA certificate file.
6. Click OK to import the certificate.
You also have the option to import a Password Protected PKCS12 Certificate. To import a
PKCS12 Certificate, check the PKCS12 Format box upon importing a new certificate and
writing down the possible password. When checking the PKCS12 Format box, the other
Certificate file selection boxes disappear and are replaced by the PKCS12 File selection
option because only this type is valid.
To view a certificate:
2. Select the certificate from the list and click View from the toolbar.

Fortinet Inc.
System
3. The following information is available:
Certificate Name The name of the certificate.
Status The certificate status.
Serial number The certificate serial number.
Issuer The issuer of the certificate.
Subject The subject of the certificate.
Effective date The date and time that the certificate became effective.
Expiration date The date and time that the certificate expires.
4. Click OK to return to the Certificates page.
To download a CA certificate:
2. Click the download icon in one of the columns: Certificate, Sub Certificate, or Cacert.
To delete a CA certificate:
2. Select the certificate from the list and click Delete from the toolbar.
3. Click Yes, I’m sure in the Are You Sure confirmation page.
Firmware certificate(s) cannot be deleted.
Login Disclaimer
Go to System > Login Disclaimer to customize the warning message, and to enable or disable the Login Disclaimer.
If enabled, the Login Disclaimer will appear when a user tries to log into the unit.
SNMP
In version 3.0.6 and later, all admin ports that are specified support SNMP.
SNMP is a method for a FortiSandbox system to monitor your FortiSandbox system on your local computer. You will
need an SNMP agent on your computer to read the SNMP information.

Fortinet Inc.
System
Using SNMP, your FortiSandbox system monitors for system events including CPU usage, memory usage, log disk
space, interface changes, and malware detection. Go to System > SNMP to configure your FortiSandbox system’s
SNMP settings.
SNMP has two parts - the SNMP agent or the device that is sending traps, and the SNMP manager that monitors those
traps. The SNMP communities on the monitored FortiSandbox are hard coded and configured in the SNMP menu.
The FortiSandbox SNMP implementation is read-only — SNMP v1, v2c, v3 compliant SNMP manager applications,
such as those on your local computer, have read-only access to FortiSandbox system information and can receive
FortiSandbox system traps.
From here you can also download FortiSandbox and Fortinet core MIB files.
Configuring the SNMP agent
The SNMP agent sends SNMP traps that originate on the FortiSandbox system to an external monitoring SNMP
manager defined in one of the FortiSandbox SNMP communities. Typically an SNMP manager is an application on a
local computer that can read the SNMP traps and generate reports or graphs from them.
The SNMP manager can monitor the FortiSandbox system to determine if it is operating properly, or if there are any
critical events occurring. The description, location, and contact information for this FortiSandbox system will be part of
the information an SNMP manager will have. This information is useful if the SNMP manager is monitoring many
devices, and it will enable faster responses when the FortiSandbox system requires attention.
To configure the SNMP agent:
1. Go to System > SNMP to configure the SNMP agent.

SNMP Agent Select to enable the FortiSandbox SNMP agent. When this is enabled, it sends
FortiSandbox SNMP traps.
Description Enter a description of this FortiSandbox system to help uniquely identify this
unit.
Location Enter the location of this FortiSandbox system to help find it in the event it
requires attention.
Contact Enter the contact information for the person in charge of this FortiSandbox
system.
SNMP v1/v2c Create new, edit, or delete SNMP v1 and v2c communities. You can select to
enable or disable communities in the edit page. The following columns are
displayed: Community Name, Queries, Traps, Enable.
SNMP v3 Create new, edit, or delete SNMP v3 entries. You can select to enable or
disable queries in the edit page. The following columns are displayed: User
Name, Security Level, Notification Host, Queries.
To create a new SNMP v1/v2c community:
1. Go to System > SNMP.
2. In the SNMP v1/v2c section of the screen select Create New from the toolbar.

Fortinet Inc.
System
Enable Select to enable the SNMP community.
Community Name Enter a name to identify the SNMP community.
Hosts The list of hosts that can use the settings in this SNMP community to monitor
the FortiSandbox system.
IP/Netmask Enter the IP address and netmask of the SNMP hosts. Select the Add button
to add additional hosts.
Queries v1 Enter the port number and select to enable. Enable queries for each SNMP
version that the FortiSandbox system uses.
Queries v2c Enter the port number and select to enable. Enable queries for each SNMP
version that the FortiSandbox system uses.
Traps v1 Enter the local port number, remote port number, and select to enable. Enable
traps for each SNMP version that the FortiSandbox system uses.
Traps v2c Enter the local port number, remote port number, and select to enable. Enable
traps for each SNMP version that the FortiSandbox system uses.
SNMP Events Enable the events that will cause the FortiSandbox unit to send SNMP traps to
the community.
l CPU usage is high
l Memory is low
l Hard disk usage is high
l RAID disk information
l Average scan time
l Topology map and health check status for cluster has changed
l Interface is up or down
l Power Supply failure (not available on FSA-500F model)
l Malware is detected
l License or contract is close to expiry
4. Click OK to create the SNMP community.
To create a new SNMP v3 user:
1. Go to System > SNMP.
2. In the SNMP v3 section of the screen, select Create New from the toolbar.

Fortinet Inc.
System
Username Enter the name of the SNMPv3 user.
Security Level Select the security level of the user. Select one of the following:
l None
l Authentication only
l Encryption and authentication
Authentication Authentication is required when Security Level is either Authentication only or

Encryption and authentication.
Method Select the authentication method. Select either:

l MD5 (Message Digest 5 algorithm)
l SHA1 (Secure Hash algorithm)
Password Enter the authentication password. The password must be a minimum of 8

characters.
Encryption Encryption is required when Security Level is Encryption and authentication.
Method Select the encryption method, either DES or AES.
Key Enter the encryption key. The encryption key value must be a minimum of 8
characters.
Notification Hosts (Traps)
IP/Netmask Enter the IP address and netmask. Click the Add button to add additional
hosts.
Query
Port Enter the port number. Select to Enable the query port.
SNMP v3 Events Select the SNMP events that will be associated with that user.
l CPU usage is high
l Memory is low
l Hard disk usage is high
l RAID disk information
l Average scan time
l Topology map and health check status for cluster has changed
l Interface is up or down
l Power Supply failure (not available on FSA-500F model)
l Malware is detected
l License or contract is close to expiry
4. Click OK to create the SNMP community.
MIB files
To download MIB files, scroll to the bottom of the SNMP page, and select the MIB file that you would like to download to
your management computer.

Fortinet Inc.
System
Event Calendar
This page displays major events. You can show your events in a day, week, month, or timeline format. You can drill down
to day level and click each event for its details.

Fortinet Inc.
System
Filter You can filter for the events you would like to see by turning on/off the event.
Day Click to display the event calendar by day.
Week Click to display the event calendar by week.
Month Click to display the event calendar by month.
Agenda Click the Agenda tab to schedule jobs.
Timeline Click to display the event calendar by timeline.
The following events are displayed:
System Events l System login/logout

l Reboot/shutdown
l Firmware upgrade
l System critical errors
l System configuration changes (includes user creation, scan profile change
etc.)
Notification Events l PDF report generation

l Network share scan
Threat Events l Malware/URL detection. Double-clicking on the event will show its detailed
information in a new browser tab.
You can configure what types of events to show in the System > Event Calendar Settings page.

Fortinet Inc.
System
Event Calendar Settings
System > Event Calendar Settings allow you to specify which types of events display in System > Event Calendar. The
default displays all available event types.
Event types include: Send Mail, Backup, Restore, Network Share, Network, DNS, Routing, Admin, Mail Server, Time
Change, Hostname Change, LDAP, Certificate, VM, RADIUS, Login, Logout, System, Reboot, Job Alert, Shutdown,
Backup, Restore, Firmware Upgrade, Operation Center, Scan Profile, Scan Policy and Object, Allow/Block List or
White/Black List, and Job Details.
Moving an event into the Unapplied Event Types category will hide all instances of those events in the Event Calendar.
Moving an event into the Applied Event Types category will restore these events to the calendar, including past events.
Events can be moved between the two categories by dragging and dropping them.
Job View Settings
Go to System > Job View Settings to define columns and their order for every job result. You can set the number of jobs
shown on each page for view types that support pagination.
You can configure how to load the next set of jobs:
l Pagination
l Infinite Scroll
Job Result pages show job data, including:
l Scan Job > File Job Search
l Scan Job > URL Job Search
l Log & Report > File Scan
l Log & Report > URL Scan
l Job links in Dashboard > Status > Scan Statistics widget
Selected columns, and their order, are displayed in the top row. Available columns are displayed in the bottom row. Drag
and drop columns to adjust their order.
Job result pages also have the Customize icon. Clicking it will open the Job View Setting page, where the user can adjust
the settings dynamically.
The File Detection Columns section defines the columns and the order to display file scan results. The URL Detection
Columns section defines the columns and the order to display URL scan results.
You can adjust column width or drag column headers to adjust their order and the change will be saved for future visits.
You can also use the Column Setting button in the job result page to change settings on the fly and go back to the
original page. Column settings are user based, which means different users have their own settings.

Fortinet Inc.
System
The following columns are available to choose from for the View Job pages:
Action Extra information, such as showing if a file is an archive file, or if the file is
detected through AV Rescan. Users can also view job details or perform a rescan
of a Suspicious or Malicious file.
Destination The IP address of the client that downloaded the file.
Detection The date and time that the file was detected by FortiSandbox.
Device The job's input source.
Filename The file's name.
Infected OS The OS version of the FortiSandbox VM that was used to make the Suspicious
verdict.
Job ID The ID of the scan job.
Malware The name of the virus of a Malicious file.
MD5/SHA1/SHA256 The checksum values of the scanned file or URL.
Rated By The method by which the job is rated, such as the VM Engine.
Rating The rating of the scan job. It can be one of Malicious, High Risk, Medium Risk,
Low Risk, Clean and Unknown.
Scan Unit The serial number of the FortiSandbox unit which the file is scanned on.

Fortinet Inc.
System
Service The traffic protocol that file is transferred, such as FTP, HTTP, IMAP, POP3,
SMB, OTHER and SMTP.
Source The IP address of the host where the file was downloaded.
Submitted Filename The scan job's filename, or a file's parent archive filename, or the submitted
filename associated with an On-Demand scan.
Submit User The user name or IP address who submits the scan file or URL.
Suspicious Type The malware's type, such Attacker, Riskware or Trojan.
URL The scanned URL. Only available in URL scan job pages.
Settings
Go to System > Settings to configure the administrator account settings.
Idle timeout Length of time before FortiSandbox logs out an inactive user, from 1 to 480
minutes.
Menu Type Set the left menu to be Compact or Expanded. In compact mode, click an icon in
the left menu to expand and display the menu items.
Language Temporarily change the GUI language until the next login.
Report Saving Days Length of time to keep reports, from 1 to 28 days.
Show alarms of unprocessed Enable this option to show notifications in the top banner. Select the time period
detections on Dashboard and rating of notifications. You must log out and log back in to show notifications.
Click the notification to go to Dashboard > Operation Center to see the details.
Reset all widgets Reset all widgets in Dashboard > Status.

Fortinet Inc.
HA-Cluster
A single FortiSandbox device can scan a limited number of files in a given time period. To handle heavier loads, you can
use multiple FortiSandbox devices in a load-balancing high availability (HA) cluster.
There are three types of nodes in a cluster: primary, secondary, and worker.
Primary The primary node (Unit 1 in the diagram) manages the cluster, distributes jobs and gathers
the results, and interacts with clients. It can also perform normal file scans. All scan-related
configuration should be done on the primary node and they will be broadcasted from the
primary node to the other nodes. Any scan-related configuration that has been set on a
worker node will be overwritten.
On the primary node, users can:
l Change a worker node's role (secondary and worker)

Fortinet Inc.
HA-Cluster
l Configure a worker node's network settings

l Upgrade worker nodes
l View VM status page of worker nodes
l Configure FortiGuard settings of worker nodes
l Configure VM images of worker nodes, such as setting clone numbers of each VM image
l Configure a ping server to frequently check unit's network condition and downgrade itself
as a secondary node when necessary to trigger a failover

Although all FortiSandbox models can work as a primary node, we recommend using a more
powerful model.
Secondary The secondary node (Unit 2 in the diagram) is for HA support and normal file scans. It
monitors the primary node's condition and, if the primary fails, the secondary will assume the
role of primary. The former primary will then become a secondary when it is back up.
To support failover, ensure both the primary and secondary nodes are configured correctly:
l Both the primary and secondary nodes must be the same model.
l Both nodes must have the same network interface configuration, including:
l The same subnet for port1.

l The same subnet for port3.
l The same routing table.
Worker The worker nodes (Units 3–5 in the diagram) perform normal file scans and report results
back to the primary and secondary nodes. They can also store detailed job information.
Workers should have their own network settings and VM image settings.
Workers can be any FortiSandbox model including FortiSandbox VM. Workers in a cluster do
not need to be the same model.
The total number of worker nodes, including the secondary node, cannot exceed 100.
For heavy job loads, use more powerful FortiSandbox models.
Cluster setup
To save time configuring an HA-Cluster, review cluster pre-requisites. After you have setup the Cluster, you can
configure cluster level failover IP for each port except port3 and any ports the sniffer is sniffing. You can also enable
Health Check to set up a ping server to ensure the network condition between client devices and FortiSandbox is always
up.
This section contains the following topics:
l HA-Cluster pre-requisites on page 171
l Example configuration on page 171
l Cluster level failover IP on page 175
l Health Check on page 175
l Using an aggregate interface on page 177

Fortinet Inc.
HA-Cluster
HA-Cluster pre-requisites
l Primary and secondary units are the same model and configuration. We recommend using FortiSandbox 2000E or
higher hardware or FortiSandbox VM with SSD drives as primary and secondary nodes in a cluster with multiple
worker nodes.
The worker unit can be a different model and have a different set of Windows VM from the primary or secondary
units.
l HA-Cluster requires all nodes to have port1 to be accessible. Nodes use that port to communicate with each other.
Port1 is the admin port by default. Other available ports can also be used as the admin port.
l Port3 on all nodes should be connected to the Internet separately.
l All nodes should be on the same firmware build.
l Each node should have a dedicated network port for internal cluster communication.
Internal cluster communication is encrypted and includes:
l Job dispatch
l Job result reply
l Setting synchronization
l Cluster topology broadcasting
The system time must be synched on all nodes in the HA cluster. This prevents out-of-sync
job results, logs and statistics. It will also prevent the secondary device from becoming the
primary device during reboot.
We recommend that these ports be connected to the same switch and have IP addresses
in the same subnet. If the job load is heavy, we recommend using the 10G fiber port as the
internal communication port.
Port1 and any other administrative port set through the CLI command set admin-port
are not recommended to be used as the internal communication port.
Example configuration
This example shows the steps for setting up an HA-Cluster using three FortiSandbox units.
Step 1 - Prepare the hardware:
Prepare the following hardware:

l Eleven cables for network connections.
l Four 1/10 Gbps switches.
l Three FortiSandbox units with proper power connections (units A, B, and C). In this example, unit A is the primary
node, unit B is the secondary node, and unit C is the worker node.
Put the primary and secondary nodes on different power circuits.

Fortinet Inc.
HA-Cluster
Step 2 - Prepare the subnets:
Prepare four subnets for your cluster (customize as needed):

l Switch A: 192.168.1.0/24: For system management.
l Gateway address: 192.168.1.1
l External management IP address: 192.168.1.99
l Switch B: 192.168.2.0/24: For internal cluster communications.

l Switch C: 192.168.3.0/24: For the outgoing port (port 3) on each unit.
l Gateway address: 192.168.3.1
l Switch D: 192.168.4.0/24: For the file submission port (port 4) on the primary and secondary unit.
Step 3 - Setup the physical connections:
1. Connect port 1 of each FortiSandbox device to Switch A.

2. Connect port 2 of each FortiSandbox device to Switch B.
3. Connect port 3 of each FortiSandbox device to Switch C.
4. Connect port 4 of the primary and secondary FortiSandbox device to Switch D.
Step 4 - Configure the primary:
1. Power on the device (Unit A), and log into the CLI (see CLI overview on page 8).
2. Configure the port IP addresses and gateway address with the following commands:
set port1-ip 192.168.1.99/24
set port2-ip 192.168.2.99/24
set port3-ip 192.168.3.99/24
set port4-ip 192.168.4.99/24
3. Configure the device as the primary node and its cluster failover IP for port1 with the following commands:
hc-settings -sc -tM -nPrimaryA -cTestHCsystem -ppassw0rd -iport2
hc-settings -si -iport1 -a192.168.1.98/24
hc-settings -si –iport4 -a192.168.4.98/24
For information about CLI commands, see the FortiSandbox CLI Reference Guide on the Fortinet Document
Library.
4. Review the cluster status with the following command:
hc-status -l
Other ports on the device can be used for file inputs.
Step 5 - Configure the secondary:
1. Power on the device (Unit B), and log into the CLI.
set port1-ip 192.168.1.100/24
set port2-ip 192.168.2.100/24
set port3-ip 192.168.3.100/24
set port4-ip 192.168.4.100/24
3. Configure the device as the secondary node with the following commands:
hc-settings -sc -tP -nSecondaryB -cTestHCsystem -ppassw0rd -iport2
hc-settings -l
hc-worker -a -s192.168.2.99 -ppassw0rd

Fortinet Inc.
HA-Cluster

hc-status -l
Step 6 - Configure the worker:
1. Power on the device (Unit C), and log into the CLI.
set port1-ip 192.168.1.101/24
set port2-ip 192.168.2.101/24
set port3-ip 192.168.3.101/24
3. Configure the device as a worker node with the following commands:
hc-settings -sc -tR -cTestHCsystem -ppassw0rd -nWorkerC -iport2
hc-settings -l
hc-worker -a -s192.168.2.99 -ppassw0rd
hc-status -l
Step 7 - Configure client devices to send files to FortiSandbox port4 failover IP:
1. Configure client devices to use unit A port4’s failover IP to submit files so that during failover, the new primary node
(unit B) port4 will take over that IP.
In FortiGate, enable FortiSandbox and connect it to the port4's failover IP.
2. If you enable adapters such as ICAP, BCC, or MTA on the primary port4’s failover IP, in adapter’s client
configuration, you must specify primary port4’s failover IP to make adapter clients send traffic to FortiSandbox HA
cluster. The following examples are for BCC and ICAP settings.

Fortinet Inc.
HA-Cluster

Fortinet Inc.
HA-Cluster
Step 8 - Configure the following settings on each unit:
l In Scan Policy and Object > VM Settings, set each unit's clone number.
l Configure Network settings such as default gateway, static route, and system DNS.
l In Scan Policy and Object > General Settings set port3 gateway and DNS server.
Scan related settings, such as the scan profile, should be set on primary unit only; they will be synchronized to the
worker node. For details, see Primary and worker roles on page 181.
Scan input related settings should be set on primary node only as only primary node receives input files.
If you use the GUI to change a role from worker to standalone, you must remove the worker
from the primary using the CLI command hc-primary -r<serial number>; then use
hc-status -l to verify that the worker unit has been removed.
Cluster level failover IP
You can configure a cluster level failover IP for each port except port3 and any ports the sniffer is sniffing. This IP set
works as an alias IP of the primary node network port. The primary node local IP set and secondary node Local IP set are
kept locally during failover.
This failover IP set should be set on the current primary node through the CLI command hc-settings. It should be in
the same subnet of each port’s local IP. Client devices such as FortiGate should point to this failover IP. When a failover
occurs, this failover IP set will be applied on the new primary node.
Health Check
HA-Cluster > Health Check is only available on the primary node. You can use the Health Check to set up a ping server
to ensure the network condition between client devices and FortiSandbox is always up. If not, the primary node
downgrades itself to a secondary node if there is at least one secondary node, a failover occurs after the configured
period elapses. If no secondary node exists, the primary node keeps its primary role.
Create New Create a new health check ping server.
Edit Edit a health check ping server.
Delete Delete a health check ping server.
Interface The interface port to connect to the ping server. Port3 cannot be used.
Remote Server IP address or fully-qualified domain name of the remote ping server.
Ping Enable or disable sending the ping packet to the remote server to ensure the
network connection is up.

Fortinet Inc.
HA-Cluster
TCP Echo Enable or disable sending TCP Echo packet to ensure the network connection to
the remote sever is up.
Interval Time interval in seconds (30-180 seconds) to send a ping or TCP Echo packets.
Failover Threshold Failover threshold (3-120 times). After a certain number of consecutive missing
responses of ping or TCP Echo packets, the primary node will downgrade itself as
a secondary if there is an existing secondary node.
To create a new HA Health Check:
1. Go to HA-Cluster > Health Check.

2. Click Create New from the tool bar.
3. Configure the settings.
4. Click Ok.
To edit a HA Health Check:

2. Select the Health Check you want to edit.
4. Edit the settings.
5. Click Ok.
To delete a HA Health Check:

2. Select the Health Check you want to delete.
4. Click the Yes, I'm sure button to delete the Health Check.

Fortinet Inc.
HA-Cluster
Using an aggregate interface
To configure IP addresses on an aggregate interface using the GUI:
1. Go to System > Interfaces and click Create New.
2. Select the Interface Members and set up the IPv4 address and netmask.
3. Click OK.
A new interface called bond1 is created.
To configure IP addresses on an aggregate interface using the CLI:
1. Use the show command to display information about all interfaces.

2. Enter the following command.
hc-settings -si –ibond1 –a<External IP/NetMask>
3. Enter the show command again to see the new external IP address.
In the GUI, System > Interfaces also displays the new external IP address.

Fortinet Inc.
HA-Cluster
Cluster Management
Use HA-Cluster > Cluster Management to view the basic information of cluster nodes and to manage the cluster.
The total number of cluster members are shown at the bottom of the list. This number cannot
exceed 101, including the primary.
The Cluster Management section displays all the secondary and worker nodes.
Host Name The host name of the device in the cluster.
Serial Number The serial number of the device.
Type The type of the device: Primary, Secondary, or Worker.
Alias The device's alias.
Version The software version of the device.
IP Address The device's internal communication IP address.
Pending Jobs The number of pending jobs of the device.
Status The status of the device: Active or Inactive.

Fortinet Inc.
HA-Cluster
Use the buttons in this section to manage the cluster.
To manage the cluster:
1. Go to HA-Cluster > Cluster Management.

2. Click Refresh to get the latest cluster information.
l Select one unit and click View Dashboard to display that unit’s Dashboard.
l Select one or more units and click Upgrade Firmware to upload a firmware image to upgrade the selected units.
The firmware image must be in .out or .deb format.

l Select one or more units and click Upload Fortiguard to upload a package file to the selected units.
l Click Backup All to back up the configuration file of all cluster units (including the primary unit) to an archive file.
The backup archive file is named with the cluster name and the date and time.
l Select one or more units and click Purge Jobs to delete the selected units’ pending jobs.
l If a node is running a different version from the primary node, there is an information icon which tells you that
the firmware version is not compatible with the primary node.
Synchronization
Use the Synchronize Settings In Real-Time From Primary To Other Nodes section to set synchronization options.
To set cluster synchronization options:
1. Go to HA-Cluster > Cluster Management.

2. In the Synchronize Settings In Real-Time From Primary To Other Nodes section, select what to synchronize with
secondary and worker nodes.
3. Click Synchronize Now.
Access privilege
To set access privilege for the Cluster Management page:
1. Go to System > Admin Profiles to the HA Cluster section.

2. Set the privilege for Cluster Management/Status.
Read Write privilege allows access to all functions on this page.
Read Only privilege only displays this page.
Job Summary
HA-Cluster > Job Summary shows job statistics data of each node in a cluster. It is only available on the primary node.
To view a HA Job Summary:
1. Go to HA-Cluster > Job Summary.

2. Select either File or URL button to view file-based scan results and URL scan results.

Fortinet Inc.
HA-Cluster
Time Period Drop down Select the period of time over which the data was collected from the dropdown.
You have the following options: Last 24 Hours, Last 7 Days, and Last 4
Weeks.
Serial Number The serial number of the device in the cluster.
Pending The number of files in the job queue waiting to be scanned.
Malicious The number of malicious files detected.
Suspicious The number of suspicious files detected.
Clean The number of clean files detected.
Other Other files that have been scanned and have an Unknown rating.
Select a number from the Malicious, Suspicious, Clean, or Other columns to view details about those specific files.
Managing worker nodes
On a primary node, you can select a worker to view and manage information pertaining to that worker. In Dashboard >
Status, the following widgets are displayed: System Information, Scan Statistics, System Resources including Disk
Usage.
To manage worker nodes on the primary node:
1. Go to HA-Cluster.
2. Select the worker node's serial number.
3. You can perform the following tasks:
l View the worker node's dashboard.
l Change the worker node's role using the Dashboard > Status > System Information widget.
l Configure the worker node's network settings (such as its IP address, routing table, DNS, and Proxy settings).
l Configure the worker nodes' network settings for VM external traffic through port3.
l Upgrade the worker node (including firmware, AV database etc.).
l View the worker node's VM Status page.
l View and configure the worker node's VM image settings.

Fortinet Inc.
HA-Cluster
HA Roles, Syncronization and Failover
The primary node and secondary node send heartbeats to each other to detect if its peers are alive. If the primary node is
not accessible, such as during a reboot, a failover occurs. You can also configure a ping server to regularly check the
unit's network condition and downgrade itself to secondary type to trigger a failover. In a failover, the secondary and
primary switch roles and the cluster IP addresses change, as indicated by the boxes in the lower image.
In a cluster, there is only one copy of a job, which is in the unit that the primary assigned it to.
Jobs that are assigned to the "old" primary will not be scanned in another cluster unit after
failover.
Primary and worker roles
On the primary node, all functionality is available based on your licenses and contracts. This includes accepting files
from different input sources, sending alert emails, and generating malware packages. Scan profiles should also be

Fortinet Inc.
HA-Cluster
configured on the primary node and will be synchronized to other nodes.

The following table below lists the features and its synchronization settings.
l Failover – the related settings are synchronized from primary to secondary on a regular basis and applied during a
failover event.
l Realtime – the related settings are synchronized as soon as changes are applied.
l Realtime* – the related settings are synchronized in realtime only if configured.
Feature Secondary Worker
Dashboard > Status
Widget settings Failover
NTP Server settings Failover
Security Fabric
Device, including FortiClient Failover
Adapter Failover
Network Share, including network share scans Failover
Quarantine Failover
Sniffer Failover
FortiAI Realtime Realtime
HA-Cluster
Health Check Failover
Scan Job
Overridden job verdicts Realtime Realtime
Scan Profile > Pre-Filter Realtime Realtime
Scan Profile > Advanced Realtime Realtime
General Settings > Allow VMs outbound port3 Realtime* Realtime*
General Settings > Upload Failover
General Settings > Job Archive Failover
General Settings > Upload/Password/Clean up Realtime Realtime

schedule settings
Job Queue Priority Realtime Realtime
Allowlist/Blocklist Realtime Realtime
YARA Rules Realtime Realtime
Web Category Realtime Realtime
Customized Rating Realtime Realtime

Fortinet Inc.
HA-Cluster
Feature Secondary Worker
Global Network settings Failover
Threat Intelligence > Generation Settings Failover
System
Administrators Failover/Realtime* Realtime*
Device Groups Failover/Realtime* Realtime*
Certificates Failover/Realtime* Realtime*
LDAP Servers and RADIUS Servers Failover/Realtime* Realtime*
Network settings (DNS) Realtime* Realtime*
Mail Server, including Scheduled Report Configuration Failover
SNMP Failover/Realtime* Realtime*
FortiGuard Realtime* Realtime*
Login Disclaimer Realtime* Realtime*
System Recovery Failover/Realtime* Realtime*
Settings Failover
Log & Report
Log Servers Realtime* Realtime*
Local Log Realtime* Realtime*
CLI only configuration
AI Mode Realtime Realtime
Device Low-Encryption Failover
Device Authorization Failover
File size limit configuration Realtime Realtime
FortiMail expired timeout Failover
Network settings (proxy and routing tables) Realtime* Realtime*
HA Cluster settings (cluster IP/encryption) Failover
OFTPD conserve mode Failover
Primary node scan power Failover
Prescan configuration Realtime Realtime
Remote authentication timeout Failover
TLS version Realtime Realtime
Sandboxing embedded URL Realtime Realtime

Fortinet Inc.
HA-Cluster
Although you can assign different VM types to each node in a cluster, we recommend all
nodes share the same VM types. VM types are collected from all nodes and are displayed in
the primary node’s Scan Profile > VM Association page where VM associations can be
configured and synchronized for the entire cluster. If an association for a VM type is missing on
the worker node, the sandbox scan cannot be completed.
For example, if you associate WIN10X64VM to scan all executable files when configuring the
Scan Profile on the primary node, but do not enable WIN10X64VM on a worker node, all
executable files distributed to that worker are not scanned.
Heartbeat Synchronization
Primary and secondary nodes in a cluster send heartbeats to each other every half second. When a secondary node
fails to receive a single heartbeat from the primary node, it will consider the primary node to be off-line or unreachable.
This can happen on the primary node due to a network problem or when it is rebooting. When the primary is
unreachable, a selection process for a new primary node will be triggered. The selection is promptly performed and
decided based on the health of the nodes. When a secondary node is selected, all other secondary nodes will treat it as
the new primary node and the failover process will start.
The heartbeat can also fail due to an issue with the secondary node. In that case, the selection process is still triggered
but the primary node remains the same.
Failover scenarios
The failover logic handles two different scenarios:
Objective node available The objective node is a worker (either secondary or worker) that can decide the new
primary. For example, if a cluster consists of one primary node, one secondary node,
and one worker node, the worker node is the objective node.
After a secondary node takes over the primary role, the original primary node will accept
the decision when it is back online.
After the original primary is back online, it will become a secondary node.
No Objective node When there is no objective node in the cluster, the cluster topography is not stable and
available the failover process may take several rounds of role changes. This occurs when there is
no communication between nodes because the cluster's internal communication is
down . During the failover process, the final roles of primary and secondary are decided
by three principal factors: the internal connections, the health check, and the serial
number.
Internal Connections
The internal connections in a cluster involve two ports: port1 and the cluster internal
port, typically port2 depending on your configuration.
Port1 is used when a node prompts itself to be the primary and needs confirmation from
other nodes.
The cluster internal port is used for cluster nodes to detect whether its connection to
other nodes in the cluster is available or not, and is used to ask the secondary to failover
when its health check fails.

Fortinet Inc.
HA-Cluster
Health Check
The health check is used to check the connection with the ping server. If this connection
fails in the primary node, it triggers a failover.
Serial Number
Once the port1 connection is recovered, the unit with the newer serial number will keep
the primary role and the unit with the older serial number will become the secondary.
When the new primary is decided, it will:

1. Build up the scan environment.
2. Apply all the settings synchronized from the original primary except the port3 IP and the internal communication port
IP of the original primary.
After a failover occurs, the original primary might become a secondary node.
It keeps its original port3 IP and internal cluster communication IP. All other interface ports are shut down as it becomes
a worker node. Some functionality is turned off such as email alerts. If you want to reconfigure settings, such as the
interface IP, you must do that through the CLI command or the primary's Central Management page.
Do not change the new primary node's configuration before the old primary node has returned
online, because there is a risk the configuration could be lost. If it is absolutely necessary to
reconfigure the new primary, it is recommended to first remove the old primary from the cluster
using the CLI command hc-primary -r.
As the new primary takes over the port that client devices communicate with will switch to it. As
the new primary needs time to start up all the services, clients may experience a temporary
service interruption.
Performance tuning
Setting primary node processing capacity
Primary node requires enough dedicated processing power for job distribution and cluster management. We
recommend that for every 5 VM clones on the worker nodes, 1 VM should be removed from the Master.
Example:
You are using two FSA3KE units to setup a cluster. One FortiSandbox works as Primary node and the other works as the
Worker node.
The Worker node operates 56 VM clones, so the Primary node should remove 11 clones from its processing capacity. In
this example, the Primary node should be running 45 (56 – 11) VM clones.
The CLI command c-master -s80 will take the Primary node to 80% of its VM processing power, which is 45 clones.
This means that even if you configure the Primary node to run 56 clones, at any moment, no more than 45 clones can be
running.

Fortinet Inc.
HA-Cluster
Upgrading or rebooting a cluster
Upgrading or rebooting a cluster has to be done by logging into each device or through the primary unit's Cluster
Management page. You must upgrade the cluster in the following order:
1. Workers
2. Secondary
3. Primary
It is highly recommended to setup cluster level failover IP set so the failover between primary
and secondary can occur smoothly. If you do not want the failover to happen, you can change
the secondary unit role to worker. You can either do this through the UI dashboard or the CLI
prior to the failover, then change the role back after the unit boots up.
Related CLI commands
The table below lists the CLI commands to administer your HA-Cluster.
hc-settings Configure the unit as a HA-Cluster mode unit. Set or unset cluster failover IP set.
hc-status -l List the status of HA-Cluster units.
hc-worker -a to add that worker or secondary unit to the cluster.
-r to remove that worker or secondary unit from the cluster.
-u to update that worker or secondary unit information.
hc-primary -s<10-100> Turn on file scan on the primary node with 10% to 100% processing capacity.
hc-primary -r<serial Remove the worker or secondary unit with the specified serial number from the primary
number> node.
After removing a worker or secondary node, use hc-status -l on the primary node to verify that the worker or
secondary node has been removed.

Fortinet Inc.
Log & Report
Use the Log & Report page to view and download all logs collected by the device, access scheduled reports, and
generate reports. You can see logs local to FortiSandbox, or set up a remote log server, such as one linking to
FortiAnalyzer.
Local logs retain up to 1 GB of overall logs. If this limit is reached, logs are rotated to keep the
latest ones.
Log Details
To view more details about a specific log in the log list, simply select that log. A log details pane is available at the bottom
of the window.
The log details pane contains the same information as the log message list, except with a full message in lieu of a
shortened one.
Logging Levels
FortiSandbox logs can be Emergency (reserved), Alert, Critical, Error, Warning, Information, or Debug. The following
table provides example logs for each log level.
Log Level Description Example Log Entry
Alert Immediate action is required. Suspicious URL visit domain.com from 192.12.1.12 to
42.156.162.21:80.
Critical Functionality is affected. System database is not ready. A program should have
started to rebuild it and it shall be ready after a while.
Error An erroneous condition exists and Errors that occur when deleting certificates.
functionality is probably effected.
Warning Functionality might be affected. Submitted file AVSInstallPack.exe is too large: 292046088.
Information General information about system LDAP server information that was successfully updated.
operations.
Debug Detailed information useful for Launching job for file. jobid=2726271637747836543
debugging purposes. filename=log md5=ebe5ae2bec3b653c2970e8cec9f5f1d9
sha1=06ea6108d02513f0d278ecc8d443df86dac2885b
sha256=d678da5fb9ea3ee20af779a4ae13c402585ebb
070edcf20091cb20509000f74b

Fortinet Inc.
Log & Report
Raw logs
You can download and save raw logs to the management computer using the Download Log button. Raw logs are saved
as a text file with the extension .log.gz. You can search the system log for more information.
Sample raw logs file content
itime=1458669062 date=2016-03-22 time=17:51:02 logid=1220000020 type=event subtype=unknown

pri=alert user=system ui=system action=rating status=success reason=none letype=6
msg=fname=v32.cab jobid=2725911139058114340
sha1=f61045626e5f4f74108fb6b15dde284fe0249370
sha256=f75fca6300e48ec4876661314475cdd7f38d4c73e87dfb5a423ef34a7ce0154f rating=Clean
scantime=11 malwarename=N/A srcip=204.79.197.200 dstip=208.91.115.250 protocol=HTTP
device=() url=http://officecdn.microsoft.com/pr/492350f6-3a01-4f97-b9c0-
c7c6ddf67d60/Office/Data/v32.cab
itime=1458669062 date=2016-03-22 time=17:51:02 logid=0106000001 type=event subtype=system
pri=debug user=system ui=system action=controller status=success reason=none letype=6
pid=8605 msg="Sandboxing environment is not available for job 2725913445926977878,
file type: htm, file extension: htm"
itime=1458669062 date=2016-03-22 time=17:51:02 logid=1220000020 type=event subtype=unknown
pri=alert user=system ui=system action=rating status=success reason=none letype=6
msg=fname=0_22_93_0_0_2_0_0_1.html jobid=2725913445926977878
sha1=098a2ca8d81979f2bb281af236f9baa651d557d5
sha256=424c62eaaa4736740e43f5c7376ec6f209b0d3df0e0cadcc94324280eafa101f rating=Clean
scantime=12 malwarename=N/A srcip=125.39.193.250 dstip=208.91.115.12 protocol=HTTP
device=() url=http://all.17k.com/lib/book/0_22_93_0_0_2_0_0_1.html
Fort detailed log format information, please refer to the FortiSandbox 4.0.2 Log Reference
available on the Fortinet Document Library.
Log Categories
Logs are group into different categories:
All Events All logs.
System Events Logs related to system operation, such as user creation and FDN downloads.
VM Events Logs related to guest VM systems, such as VM initialization.
Job Events Logs related to scans. You can trace the scan flow of each file or URL.
HA-Cluster Events Logs related to cluster configuration and failovers.
Notification Events Logs related to email alerts and SNMP traps.

Fortinet Inc.
Log & Report
Download Log Download a file containing the raw logs to the management computer.
History Logs Enable to include historical logs in Log Search.
Refresh Refresh the log message list.
Add Search Filter Add search filters. You can select different categories to search the logs. Search
is not case sensitive.
Pagination Jump or scroll to other pages. You can see the total number of pages and logs.
# Log number.
Date/Time Time the log message was created.
Level Level of the log message. Logging levels are:

l Alert: Immediate action is required.
l Critical: Functionality is affected.
l Error: Functionality is probably affected.
l Warning: Functionality might be affected.
l Information: Information about normal events.
l Debug: Information used for diagnosis or debugging.
User The user to which the log message relates. User can be a specific user or system.
Message Detailed log message.
Action Action that was taken on the operation, such as Update, Controller, Rescan, and
so on.
Status Status of the log, such as None, Success, or Failure.
User Interface User interface that was used, such as GUI or System.

Fortinet Inc.
Log & Report
Viewing logs in FortiAnalyzer
To view FortiSandbox logs in your FortiAnalyzer:
1. Log into FortiAnalyzer.

2. In the Select an ADOM prompt. select FortiSandbox.
3. Click the Log View tile.
Add Filter Enter a search term to search the log messages. You can also right-click an entry
in a column and select to add a search filter. Click GO to apply the filter. Not all
columns support the search feature.
Device Select the device in the dropdown list.
Time Period Select a time period from the dropdown list. Options include: Last 30 mins, Last 1
hour, Last 4 hours, Last 12 hours, Last 1 day, Last 7 days, Last N hours, Last N
days, or Custom.
GO Select to apply the time period and limit to the displayed log entries. A progress
bar is displayed in the lower toolbar.
Column Settings Select specific columns to be displayed. You can also reset the columns to its
default.
Tools Tools has options for changing how to display logs, options for search, and to add
or delete column.
Real-time Log FortiSandbox does not support Real-time Log.
Display Raw Select to change view from formatted display to raw log display.
Download This option is only available when viewing logs in formatted display.
Click to download logs. Select the log file format, then compress with gzip the
pages to include and select Apply to save the log file on the management
computer.
Case Sensitive Select to enable case sensitive search.

Search
Chart Builder Select to create a custom chart.
Display Details button Detailed information about the log message selected in the log message list. The
item is not available when viewing raw logs.
Log Details are only displayed when enabled in the Tools menu.
Search Scope Select the maximum number of log entries to be displayed from the dropdown list.
Options include: 1000, 5000, 10000, 50000, or All.

Fortinet Inc.
Log & Report
Logs The columns and information shown in the log message list will vary depending
on the selected log type and the view settings. Right-click various columns to add
search filters to refine the logs displayed. When a search filter is applied, the value
is highlighted in the table and log details.
Status Bar Displays the log view status as a percentage.
Pagination Adjust the number of logs that are listed per page and browse through the pages.
Customizing the log view
The message column can display raw or formatted logs. The columns in the log message list can be customized to show
only relevant information in your preferred order.
To View Raw and Formatted Logs
By default, formatted logs are displayed. The selected log view will affect available view options. You cannot customize
the columns when viewing raw logs.
To view raw logs:
Go to Tools and select Display Raw from the dropdown menu from the toolbar.
To view formatted logs:
Go to Tools and select Display Formatted from the dropdown menu from the toolbar.
Columns
The columns displayed in the log message list can be customized and reordered as needed. Filters can also be applied
to the data in a column.
To customize the displayed columns:
1. In the log message list view, click Column Settings in the toolbar.
2. From the dropdown list that is displayed, select a column to hide or display.
The available column settings will vary based on the device and log type selected.
3. To add more columns, select More Columns. In the Column Settings dialog box that opens, you can show or hide
columns by selecting and deselecting the columns.
4. To reset to the default columns, click Reset to Default.
5. Click OK to apply your changes.

Fortinet Inc.
Log & Report
To change the order of the displayed columns:
Place the pointer in the column header area, and then move a column by dragging and dropping.
To filter column data:
1. You can filter log summaries by using the Add Filter box in the toolbar or by right-clicking an entry and selecting a
context-sensitive filter.
2. Specify filters in the Add Filter box.
Use Regular Search. In the selected summary view, click in the Add Filter box, select a filter from the dropdown list,
and type a value. You can click on an operator to use it, such as greater than (>), less than (<), OR, and NOT. You
can add multiple filters at a time, and connect them with "and" or "or".
Use Advanced Search. Click the Switch to Advanced Search icon at the end of the Add Filter box. In Advanced
Search mode, you provide the whole search criteria (log field names and values) by typing. Click Switch to Regular
Search icon to go back to regular search.
Case-sensitive search. Use the Tools dropdown list to specify case-sensitive search.
3. In the Device list, select a device.
4. In the Time list, select a time period.
5. Click Go.
To filter log summaries using the right-click menu:
In the log message list, right-click an entry, and select a filter criteria. The search criteria with a + (plus) icon returns
entries that match the filter values, while the search criteria with a - (minus) icon returns entries that negate the filter
values.
Right-click a column for Log View to use that column value as the filter criteria. This context-sensitive filter is not
available for all columns.
For more information, see the FortiAnalyzer Administration Guide in the Fortinet Document
Library.
Summary Reports
The Summary Reports page lists all Executive Summary and Threat Activity reports including their status, and the user
who generated the report. You can download and delete the PDF reports.
Report pages are not visible on the worker node in a cluster.
Generate reports
To generate a summary report on demand, go to Logs & Reports > Summary Report.

You can generate executive summary and threat activity reports for a specified time period.

Fortinet Inc.
Log & Report
Generate Report Generate a report.
Download Report Download a report.
Refresh Click the button to refresh the entries displayed.
Delete Delete a report.
Time Period Time period of data the report includes.
Report Type Type of report.
Size Report size.
Status Status of the report.
User Who generated the report.
Report Center
On FortiSandbox, when a user generates a report, they can wait until the report is ready to view, or navigate away and
find the report later on the Report Center page.
Status The status of report generation process: Done, Stopped, or In Progress.
Start Time The time report generation starts.
Finish Time The time report is ready.
Report Type The type of report: PDF or CSV.
Report Size The size of the report, in kilobytes.
Download Count The number of times that the report has been downloaded.
Progress Percentage that the report has finished
Source The location that the report is scheduled to generate.
Detection Period The time range of the jobs that this report contains.
Actions You can view, delete, and download a report.
Pagination Adjust the number of reports that are listed per page and browse through the
pages. When you click on any entry on this page, detailed information about the
report is displayed, including the job filtering criteria.

Fortinet Inc.
Log & Report
File Scan
The File Scan page shows file-based job scans grouped by their ratings. Files submitted through On-Demand are not
included. Users can toggle to view Malicious, Suspicious and Clean job ratings. By default, Suspicious jobs are
displayed.
In this page, you can view job details and apply search filters. You can select to create a PDF or CSV format snapshot
report for files based on search filters.
File Scan Options
Suspicious Click the Suspicious icon to view the suspicious jobs.
Clean Click the Clean icon to view the clean or unknown jobs.
Malicious Click the Malicious icon to view the malicious jobs.
Show Rescan Job Only Whenever a new AV signature is downloaded, all jobs from last 48 hours will
be done in one AV Scan. Detected viruses will receive a Malicious rating.
Users can display them in Log & Report > File Scan > Malicious and enable
Show Rescan Job Only.
Add Search Filter Click the search filter field to add search filters. Click the close icon in the
search filter field to clear all search filters.
The search filter will be displayed below the search filter field. Click the close
icon beside the search filter to remove the filter.
Export Data Click the Export Data button to create a PDF or CSV snapshot report. The
time to generate the report is dependent on the number of events selected.
You can wait till the report is ready to view, or navigate away and find the
report later on the Log & Report > Report Center page.
Customize Click the Customize button to customize the Job View Settings. The change
will be applied to all file based scan result pages.
Action
View Details Click the View Details icon to view the file description and analysis details.
The information displayed is dependent on the file selected.
Perform Rescan For malicious jobs, you can also select Rescan to manually rescan the file.
This way, you can find out the behavior of a known virus. You can select to
force the file to do a Sandboxing scan even if it was detected in previous
steps of a Static Scan, AV Scan, Cloud Query, or if it was stopped from
entering the VM by a Sandboxing-prefilter setting. You can find the job in
Scan Job > File On-Demand.

Fortinet Inc.
Log & Report
Archived File An icon will appear if the file is an Archived File.
FortiGuard Static The icon displays that the file is rated by the user's overridden verdict or
Scan FortiGuard advanced static scan.
File Inside Archive The icon displays that the file is a file extracted from an archive file.
Rescan Job The icon displays that the job is Malicious from an AV Rescan or a rescan job
of a Malicious file.
AV Scan An icon will appear if this job is from an AV Rescan.
FortiSandbox has an Anti Virus rescan feature. When a new antivirus signature is available, FortiSandbox will perform a
second antivirus scan of all the jobs from the last 48 hours whose ratings are Clean or Suspicious using the new
signatures. Detected viruses will be displayed as Malicious jobs with the Rescan icon beside the View Details icon. The
original job can still be viewed in the job detail page of the rescanned file by clicking the original job ID.
Virus behavior information is not collected as viruses are detected by the AV scanner. The
rescan feature allows you to see how a virus behaves while it is being executed inside a VM.
The displayed columns are determined by settings defined in System > Job View Settings > File Detection Columns
To view file details:
1. Select a file.
2. Click View Details. A new tab opens.
For information on the View Details page, see Appendix A: Job Details page reference on page 207.
To rescan a file:
1. Select a file with a Suspicious Rating that is not rated by VM or any malicious rating file.
2. Click Perform Rescan.
3. You can force the file to do Sandboxing scan even if was detected in former steps of Static Scan, AV Scan, Cloud
Query, or stopped from entering VM by Sandboxing-prefilter setting.
4. Click OK to start the rescan.
Rescan results are in Scan Job > File Job Search and Scan Job > File On-Demand.
In this version, the maximum number of events you can export to a PDF report is 1000. The maximum number of events
you can export to a CSV report is 15000. Jobs over the maximum are not included in the report.
File Scan Summary Report
The Summary Report is similar to the system dashboard. You can add and customize widgets in this page. Select a
device and time period to customize the data to display.

Fortinet Inc.
Log & Report
If the unit is the primary node in a cluster, the data displayed is a summary from all cluster nodes. Otherwise, only the
individual unit's data is displayed.
On-Demand job data is not included.
Add Widget Click the + button to add widgets to the summary report page.
Reset View Click Reset to restore widgets to the default setting.
Time Period Select a time period from the dropdown list. The options are: Last 24 hours, Last 7 days,
or Last 4 weeks.
Device Select the device from the dropdown list.
Scan Statistics Information about the files scanned for a selected device for a selected time period.
Scan Statistics by Type Information about file types, rating, and event count for a selected device over a
selected time period. To view all the file types, click Edit and increase the top count.
Default is five.
Top Targeted Hosts Number of infection events for specific hosts for a selected device over a selected time
period.
Hover the pointer over a colored portion of a bar in the chart to view the exact number of
infection events for that host.
Selecting the infected host allows you to drill down to the job details.
File Scan Number of clean, suspicious, and malicious events at specific times over a selected
time period for the selected device.
Hover the pointer over a colored portion of a bar in the graph to view the exact number
of events for the selected type for that time period.
Top Malware Number of infection events for specific malware for a selected device over a selected
time period.
infection events for that malware.
Selecting the malware name allows you to drill down to the job details.
Top Callback Domains The top callback domains detected over a time period. Callback domains are hosts that
files visit when executing in the VM.
infection events for that malware.
Top File Types The top file types detected over a time period. When Scanned by Sandboxing is
selected, only files that have finished sandboxing are counted.

Fortinet Inc.
Log & Report
Customizing the File Scan summary report page
You can customize the FortiSandbox summary reports page. You can select the device and time period in the toolbar.
You can also select which widgets to display, where they are located on the page, and whether you want to minimized or
maximized them.
To move a widget:
Multiple widgets of the same type can be added to the dashboard. This can be useful for
viewing information over different refresh time intervals.
To edit a widget:
Click the edit icon in the widget’s title bar to open the edit widget settings window.
Configure the following information, and then select OK to apply your changes:
Custom widget title Optionally, enter a custom title for the widget. Leave this field blank to use the
default widget title.
Refresh interval Enter a refresh interval for the widget, in seconds. The widgets have default
refresh values:
l Scan Statistics: 3600 seconds
l Scan Statistics by Type: 3600 seconds
l Top Malware: 3600 seconds
l Scanning Activity: 300 seconds
l Top Targeted Hosts: 10 seconds
l Top Callback Domains: 3600 seconds
Top Count Select the number of entries to display in the widget. The top count can be
between 5 to 20 entries. This setting is available in all widgets except Scan
Statistics, Scan Statistics by Type, and Scanning Activity.
URL Scan
The URL Scan page shows jobs of URL-based scans grouped by their ratings. You can toggle to view jobs of different
ratings. The default displays Suspicious jobs.
In this page, you can view job details and apply search filters. You can select to create a PDF or CSV format snapshot
report for files based on search filters.

Fortinet Inc.
Log & Report
URL Scan Options
Suspicious Click the Suspicious icon to view the suspicious jobs.
Clean Click the Clean icon to view the clean jobs.
Malicious Click the Malicious icon to view the malicious jobs.
Add Search Filter Click the search filter field to add search filters. When the search criteria is the
Submitted Filename, click the equals sign to toggle between exact and pattern
search. Click the close icon in the search filter field to clear all search filters.
Export Data Select to create a PDF or CSV snapshot report. The time to generate the report is
dependent on the number of events selected. You can wait till the report is ready
to view, or navigate away and find the report later on the Log & Report > Report
Center page.
Customize Click the Customize button to customize the Job View Settings.
Action
View Details Click the View Details icon to view the file description and analysis details. The
information displayed is dependent on the file selected.
FortiGuard Static The icon displays that the URL is rated by the user's overridden verdict or
Scan FortiGuard advanced static scan.
Archive File The icon displays that the URL is from a file through On-Demand scan.
File Downloading The icon displays that the URL is from FortiMail and its payload is also scanned
URL as a file scan job.
Perform Rescan All suspicious items which are not rated by the VM can be rescanned.
All malicious files can be rescanned. In the Rescan Configuration dialog box, you
can customize the new scan's depth and timeout value. You can also force the
URL to do Sandboxing scan even if was detected in former steps of the allowlist
and blocklist check or stopped from entering VM by a Sandboxing-prefilter setting.
Results are in Scan Job > URL On-Demand and Scan Job > URL Job Search.
The displayed columns are determined by settings defined in System > Job View Settings > URL Detection Columns
page. For more information, go to Job View Settings on page 166.
To create a snapshot report for all search results:
1. Select to apply search filters.

2. Select the generate to report button. The Report Generator window opens.
3. Select either PDF or CSV and click the Generate Report button to create the report.
4. When report generation is completed, select the Download button to save the file to your management computer.

Fortinet Inc.
Log & Report
5. You can wait until the report is ready to view, or navigate away and find the report later on the Log & Report > Report
Center page.
In this version, the maximum number of events you can export to a PDF report is 1000. The maximum number of events
you can export to a CSV report is 15000. Jobs over the maximum are not included in the report.
URL Scan Summary Report
URL Statistics is similar to the system dashboard. You can add and customize widgets. Select a time period to
customize the data to display. This report does not include URLs submitted through On-Demand, RPC, and rescan.
Add Widget Click the + button to add widgets to the Summary Report page.
Reset View Click Reset to restore widgets to the default setting.
Time Period Select a time period from the dropdown list: Last 24 hours, Last 7 days, or Last 4
weeks.
Device Filter for a specific device.
Scan Statistics Information about the URLs scanned per OS. Click the number in the widget to
drill down to the job list.
Scan Statistics by Type Information about URL types, rating, and event count.
Scanning Activity Number of clean, suspicious, and malicious jobs.

Hover the pointer over a colored portion of the graph to view the number of
events. You can toggle between hourly data view and daily data view.
Customizing the URL Scan summary report page
The FortiSandbox summary reports page can be customized. You can select the time period in the toolbar to display
specific information. You can also select which widgets to display, where they are located in the page, and whether they
are minimized or maximized.
To move a widget:
Multiple widgets of the same type can be added to the dashboard. This can be useful for
viewing information over different refresh time intervals.

Fortinet Inc.
Log & Report
To edit a widget:
1. Click the edit icon in the widget’s title bar to open the edit widget settings window.
2. Configure the following information and then click OK.
Custom widget title Enter an optional, custom title for the widget. Leave this field blank to use the default
title.
Refresh interval Enter a refresh interval for the widget, in seconds. The default refresh values are:
l Scan Statistics: 3600 seconds
l Scan Statistics by Type: 3600 seconds
l Scan Activity: 300 seconds
Top Count Number of entries to display in the widget from 5 to 20 entries. This setting is
available in the Top Infectious URLs widget.
Network Alerts
Network alerts show detected connection attempts to known botnets, attacks to hosts on your network, and harmful
websites visited from your network.
To view network alerts (Attacker, Botnet, and URL), go to Network Alerts. You can drill down the information displayed
and apply search filters. You can select to create a PDF or CSV format snapshot report for specific types of network alert
files. Search filters will be applied to the detailed report and will be displayed in the Filtering Criteria section.
This page has the following options:
Time Period Select the time period from the dropdown list. Select one of the following: 24
Hours, 7 Days, or 4 Weeks.
You can select the time period to filter the information displayed in the GUI. This
selection is also applied to exported data for the snapshot report.
Alert Type Select Attacker, Botnet, or URL from the dropdown list. You can select the alert
type to filter the information displayed in the GUI. This selection is also applied to
exported data for the snapshot report.
Attacker Shows attacks against hosts on your network. When selecting Attacker from the
dropdown list, the following information is displayed:
l Detected: The date and time that the attack was detected by FortiSandbox.
l Backdoor: The name of the attack.

Fortinet Inc.
Log & Report
l Source: The attacker’s IP address.

l Destination: The attacked host IP address.
All columns include a filter to allow you to sort the entries in ascending or
descending order.
Botnet Shows detected connections to knows botnets. When selecting Botnet from the
dropdown list, the following information is displayed:
l Detected: The date and time that the botnet contact was detected by
FortiSandbox.
l Name: The botnet name.
l Source: The IP address of the infected host.
l Destination: The botnet command and control IP address.
The Detected, Name, and Source columns include a filter to allow you to sort the
entries in ascending or descending order.
URL Shows visited suspicious websites from your network. When selecting URL from
the dropdown list, the following information is displayed:
l Detected: The date and time that the malicious URL was visited.
l Rating: The severity of the visiting activity.
l Category: The URL’s web filtering category.
l Host: The host IP address. The first level domain name of the URL.
l URL: The visited URL address.
l Type: The URL type, http or https
l Source: The IP address of the host who visited the malicious URL.
The Detected, Category, Hostname, URL, Type, and Source columns include a
filter to allow you to sort the entries in ascending or descending order.
Tooltip: Certain URL categories are set as Benign by default. To view and
change, go to Scan Policy and Object > Web Category.
Export Data Select to create a PDF or CSV snapshot report. The time to generate the report is
dependent on the number of events selected. You can wait till the report is ready
to view, or navigate away and find the report later on the Log & Report > Report
Center page.
Refresh Click the icon to refresh the log message list.
Add Search Filter Click the search filter field to add search filters. Click the close icon in the search
filter field to remove the search filter.
To create a snapshot report for all network alert files:

2. Select Attacker, Botnet, or URL from the second dropdown list.
4. Click the Export Data button in the toolbar. The Report Generator window opens.
5. Select either PDF or CSV for the report type.

Fortinet Inc.
Log & Report

When the report generation is completed, select the Download button to save the file to your management
computer.
7. You can wait till the report is ready to view, or navigate away and find the report later on the Log & Report > Report
Center page.
Network Alerts Summary Report
The Summary Report page provides a page similar to the system dashboard. You can add and customize widgets in this
page. By selecting the time period, you can customize what data is displayed.
Add Widget Click the + button to add widgets to the summary report page.
Reset View Click the Reset button to restore widgets to the default setting. A confirmation
dialog box will be displayed, select OK to continue.
Time period Select a time period to be displayed from the dropdown list. The options are: Last
24 hours, Last 7 days, Last 4 weeks.
Event Trend Displays a chart providing information about the number of network attacks,
suspicious URL visits, and Botnet callbacks over a period of time.

Fortinet Inc.
Log & Report
Hover the pointer over a colored portion of a bar in the graph to view the exact
number of events that occurred at that time. You can toggle between hourly data
view and daily data view.
Top Network Attacks Displays a table providing information about the number and type of network
attacks.
number of events that occurred at that time.
Top Attacked Hosts Displays a table providing information about the top attacked hosts on your
network.
Top Communicated Botnet Displays a table providing information about the top communicated botnets on
your network.
Top Botnet Infected Hosts Displays a table providing information about the top botnet infected hosts on your
network.
Top Visited Suspicious Hosts Displays a table providing information about the top visited suspicious hosts.
Top Hosts Visiting Suspicious Displays a table providing information about the top hosts on your network that
URL visit suspicious URLs.
Customizing the Network Alerts summary report page
The FortiSandbox summary reports page can be customized. You can select the time period in the toolbar to display
specific information. You can also select which widgets to display, where they are located on the page, and whether they
are minimized or maximized.
To move a widget:

Fortinet Inc.
Log & Report
To edit a widget:
1. Click the edit icon in the widget’s title bar to open the edit widget settings window.
2. Configure the following information and then click OK.
Custom widget title Optionally, enter a custom title for the widget. Leave this field blank to use the
default widget title.
Refresh interval Enter a refresh interval for the widget, in seconds. Set the field to 0 to disable. The
widgets have default refresh values:
l Event Trend: 3600 seconds
l Top Network Attacks: 3600 seconds
l Top Attacked Hosts: 3600 seconds
l Top Communicated Botnet: 3600 seconds
l Top Botnet Infected Hosts: 3600 seconds
l Top Visited Suspicious URL Hosts: 3600 seconds
l Top Hosts Visiting Suspicious URLs: 3600 seconds
Top Count Select the number of entries to display in the widget. The top count can be between
5 to 15 entries. This setting is available in all widgets except Event Trend.
Log Servers
FortiSandbox logs can be sent to a remote syslog server, common event type (CEF) server, or FortiAnalyzer. Go to Log
& Report > Log Servers to create new, edit, and delete remote log server settings. You can configure up to 30 remote log
server entries.
Create New Create a new log server entry.
Edit Edit the selected log server entry.
Delete Delete the selected log server entry.
Name Name of the server entry.
Type Server type. The following options are available: CEF, syslog (TCP/UDP), or
FortiAnalyzer.
Log Server Address Log server address (IPv4 or IPv6).
Port Log server port number.
Status Status of the log server, Enabled or Disabled.
Secure Connection Security status of the log server, Enabled or Disabled.

This option is only available on SyslogTCP.

Fortinet Inc.
Log & Report
To create a new server entry:
1. Go to Log & Report > Log Servers.

Name Name of the new server entry.
Type Select log server type from the dropdown list.
Log Server Address Log server IP address or FQDN.
Port Port number. The default port is 514.
Status Select to enable or disable sending logs to the server.
Status Select to enable or disable encrypted communication between FortiSandbox

and the syslog server.
Log Level Select to enable the logging levels to be forwarded to the log server. The
following options are available:
l Enable Alert Logs. By default, only logs of non-Clean rated jobs are sent.
To send Clean Job Alert Logs, select Include job with Clean Rating.
l Enable Critical Logs
l Enable Error Logs
l Enable Warning Logs
l Enable Information Logs
l Enable Debug Logs
4. Click OK.
You can forward FortiSandbox logs to a FortiAnalyzer running version 5.2.0 or later.
Syslog server supports IPv6.
To edit or delete a log server:
1. Go to Log and Report > Log Servers.

2. Select an event entry.
3. Click Edit or Delete.
Local Log
As local logs retain up to 1 GB of overall logs, you can turn off logs for specified severity levels.
To turn off logs from specific severity levels:
1. Go to Log & Report > Log Settings >Local Log.

2. Uncheck a level to turn off logs from that severity level.

Fortinet Inc.
Log & Report
Diagnostic Logs
Diagnostic logs allow the FortiSandbox support team to collect information for troubleshooting purposes. When enabled,
users can record and view system internal logs and CLI histories.
To enable or disable Diagnostic Logs:
1. Go to Logs & Report > Log Settings > Diagnostic Logs.

2. Enable or disable Kernal Logs or CLI Logs.

Fortinet Inc.
Appendix A: Job Details page reference
You can create custom VMs using pre-configured VMs, your own ISO image, or Red Hat VMs
on VirtualBox. For more information, contact Fortinet Customer Service & Support.
For information on hard disk hot-swapping procedure, system recovery procedure using
Rescue Mode, and password reset procedure, see the FortiSandbox Best Practices and
Troubleshooting Guide in the Fortinet Document Library.
When you click the Job Details icon, a new browser tab opens showing detailed forensic information of a job. The
information is in three tabs: Overview, Tree view, and Details.
The Overview tab shows overview information of a job, including input source, scan conditions, file type, and so on. A
global map shows the source and destination of the file or URL.
Item Description
File type File type, for example, High Risk Downloader.
Virus Name Name of the virus.
FortiGuard Encyclopedia Select to view the FortiGuard Encyclopedia analysis of the file if the file has a Malicious
Analysis rating. This page provides analysis details, detection information, and recommended
actions.
Mark as clean (false Select to mark the job as clean (false positive) or suspicious (false negative). This field
positive) / Mark as is dependent on the file risk type. In the Apply Override Verdict dialog box, type a
suspicious (false comment and select Submit or Submit feedback to Cloud to send the file to the
negative) FortiGuard team for analysis.
After a job has an overridden verdict, its future rating will be the overridden one until you
reset the verdict.
After a job's verdict is overridden, the job will be listed in the Scan Job > Overridden
Verdicts page for easy tracking. See, Overridden Verdicts on page 80
Export Job Details to Export the job details to a PDF report.

Page
Download Original File Download the password protected original file (.zip format) to your management
computer for further analysis. The default password for this file is fortisandbox.

Fortinet Inc.
Item Description
Unzip the original file only on a management computer in an

analysis environment.
Received The date and time the file was received by FortiSandbox.
Started The date and time the scan started and the timezone.
Status The status of the scan. Status: Done, Canceled, Skipped, and Timed Out.
Rated by Which scan module made the rating decision, such as the AV Scanner, FortiSandbox
Community Cloud, Static File Scan, VM Engine, or Rating Service Endpoint.
Submit Type The input source of the file such as FortiMail.
Source IP The malware host IP address.
Destination IP The IP address of the client that downloaded the virus.
Digital Signature The digital signature availability status of the scanned file.
AI Mode Whether AI mode is on or off.
Scan Bypass When available, the scan bypass configuration will be displayed.
Configuration
SIMNET The SIMNET status when the scan is running.
Depth The URL level to do the recursive scan.
Region WindowsCloudVM region.
Timeout Value File/URL scan timeout setting.
Virus Total By clicking the Virus Total link, a new page will open to query
https://www.virustotal.com.
Only a limited number of queries per minute is allowed without manual interaction with
the Virus Total website.
Child list For submitted URLs, this field displays a color-coded rating for each child URL, so that
you an quickly identify child URLs that have a different rating from the parent URL.
The Original Job of this Click the link to view the original job if this one is an AV rescan or On-Demand rescan
Rescan Job job.
Details Information View additional file information including the following: Packers, File Type, Downloaded
From, File Size, Service, MD5, SHA1, SHA256, ID, Submitted By, Submitted Filename,
Filename, Scan Start Time, VM Scan Start Time, VM Scan End Time, VM Scan Time,
Scan End Time, Total Scan Time, Scan Unit, Embedded URL number, No VM Reason
(reason why sample was not scanned inside VM), VM Reason (reason why sample
entered into VM), Launched OS (VM type), Infected OS, and Anti Evasion Triggers.
If the sample is from FortiMail, Email related information, such as the Email Sender,
Receiver, Client IP, From, To, and Subject will also be shown.

Fortinet Inc.
Item Description
If the sample is from Adapter, Adapter IP address and Email related information, such
as BCC-Agent Sender and BCC-Agent Receiver will also be shown.
Indicators A summary of the Malware's behavior indicators if there are any.
Rating The rating is the final verdict of the FortiSandbox on the scan job based on the collected
behavioral activities and static analysis. The assessment of their risk and impact is
based on our FortiGuard Threat Intelligence of previously-known malware.
Ratings include Malware, High risk, Medium risk, Low risk, and Clean.
The Tree View tab shows a tree for file's static structure or file's parent-child process relationship when it executes inside
a guest VM. You can drag the tree using the mouse and zoom in or out using the mouse wheel. If there is suspicious
activity with one tree node, its label will be colored red. Clicking a node in the tree will open more information in tab
format. Suspicious information is shown in the color red, so you can quickly locate it.
The Details tab shows analysis details for each detection OS that is launched during the scan. It shows information in a
different way from Tree View part. The following are details of information displayed:
Item Description
Analysis Details View the following analysis details for each Detection OS that is launched during
the scan. Each Detection OS's detail will be shown in a separate tab. The Infected
OS will have a VM Infected icon in its tab title.
If the Malware is detected by non-Sandboxing scan, such as FortiGuard static
scan, the tab title is displayed as N/A.
Behavior View the file's behavior over time and its density during its execution.
Chronology Chart Clean behaviors: green bubble.
Suspicious behaviors: red, blue, or orange bubble.
The higher the bubble, the more serious the event is.
To view the event details, hover the mouse on top of the bubble.
If a file scan is scanned with more than one VM type, the VM tab will dynamically
switch to the chart for that type.
If the file hits any imported YARA rule, a YARA tab will appear with detailed
information. including:
l The hit rule
l Rule's risk level
l Rule set name
l Link to original YARA rule file
Captured Packets Select the Captured Packets button to download the tracer PCAP file to your
management computer.The packet capture (PCAP) file contains network traffic
initiated by the file. You must have a network protocol analyzer installed on your
management computer to view this file.
The Captured Packets button is not available for all file types.
Tracer Package Download the compressed .tar file containing the tracer log and related files.
The password protected /backup folder in the tracer log contains information
about the program’s execution. The default password for this file is fortisandbox.

Fortinet Inc.
Item Description
Unzip the tracer log only on a management computer in an

analysis environment.
To see all dropped files by the file being scanned, use the -g argument. This
generates a file named filemap.txt in the backup directory of the tracer package.
Tracer Log A text file containing detailed information collected inside the Sandbox VM.
STIX IOC Download the IOC in STIX2 format.
Traffic Signature Displays the signatures of industrial application network traffic that are detected.
Click the name to go to its FortiGuard page.
IPS Signature Displays IPS signatures that are detected, the signatures are displayed. Click the
name to go to its FortiGuard page.
Screenshot Download screenshot images when the file was running in the sandbox. This
image is not always available.
YARA Hits If the file hits FortiSandbox internal YARA rules, detailed information is displayed.
Office Behaviors Suspicious indicators detected by FortiGuard advanced Office file static scan
engine.
Virtual Simulator Suspicious indicators detected by FortiGuard advanced Web file static scan
engine.
Indicators A summary of behavior indicators, if available.

When detailed information is available below, a question mark icon is displayed.
When clicked, detailed information is displayed. For some operations, such as
File Operations, users can download files in a password protected ZIP format.
MITRE ATT&CK Displays malware's attack techniques and tactics.

Matrix By default, a light version is displayed. Click the toggle button to swap between
the Lite Matrix and Full Matrix.
Botnet Info The botnet name and target IP address.
Files Operations The file-related operations, includes Created/Deleted/Renamed/Modified/Set

Attributes.
Registry The registry-related operations, includes Created/Deleted.

Operations
Memory Operations The memory-related operations, includes Process Related/Process

Created/Process Created and Injected/Written.
Network Users that are infected by this executable will notice HTTP connections with
Operations certain URL/IP addresses.
Click the Network Behaviors dropdown icon to view the network behavior of the
file. This field may not be available for all file types.

Fortinet Inc.
Item Description
For certain document files, if they contain malicious URLs, those URLs are
displayed here. Users can select a URL to display its detailed information, like
rating history and visit volume history.
Behaviors In The executable file's behavior during execution, in time sequence.

Sequence
Tracer/Rating The tracer/rating package version is displayed at the bottom of the job detail page
Engine Version and in the PDF Report.

Fortinet Inc.
Appendix B: Malware types
The following table lists malware types and attacks that are identified by FortiSandbox.
Malware type Description
Infector Infector malware is used to steal system and user information. The stolen information is then
uploaded to command and control servers. Once the infector installs on a computer, it
attempts to infect other executable files with malicious code.
Worm Worm malware replicates itself in order to spread to other computers. This type of malware
does not need to attach itself to an existing program. Worms, like viruses, can damage data or
software.
Botnet Botnet malware is used to distribute malicious software. A botnet is a collection of Internet-
connected programs communicating with other similar programs in order to perform a task.
Computers that are infected by botnet malware can be controlled remotely. This type of
malware is designed for financial gain or to launch attacks on websites or networks.
Hijack Hijack malware attempts to hijack the system by modifying important registry keys or system
files.
Stealer Stealer malware is used to harvest login credentials of standalone systems, networks, FTP,
email, game servers and other websites. Once the system is infected, the malware can be
customized by the attacker.
Backdoor Backdoor malware installs a network service for remote access to your network. This type of
malware can be used to access your network and install additional malware, including stealer
and downloader malware.
Injector Injector malware injects malicious code into system processes to perform tasks on its behalf.
Rootkit Rootkit malware attempts to hide its components by replacing vital system executables.
Rootkits allow malware to bypass antivirus detection as they appear to be necessary system
files.
Adware Adware malware is a software package which attempts to access advertising websites.
Adware displays these unwanted advertisements to the user.
Dropper Dropper malware is designed to install malicious software to the target system. The malware
code may be contained within the dropper or downloaded to the target system once activated.
Downloader Downloader malware attempts to download other malicious programs.
Trojan Trojan malware is a hacking program which gains privileged access to the operating system
to drop a malicious payload, including backdoor malware. Trojans can be used to cause data
damage, system damage, data theft or other malicious acts.
Riskware Riskware malware has security-critical functions which pose a threat to the computer.
Grayware Grayware malware is a classification for applications that behave in a manner that is annoying
or undesirable. Grayware includes spyware, adware, dialers, and remote access tools that
are designed to harm the performance of computers on your network.

Fortinet Inc.
Malware type Description
Unknown No definitions currently exist for this type of attack.
FortiSandbox scans executable (Windows .exe and .dll script files), JavaScript, Microsoft Office, Adobe Flash, PDF,
archives, and other file types the user defines. JavaScript and PDF are the two common software types that malware
uses to execute malicious code. For example, JavaScript is often used to create heap sprays and inject malicious code
to execute in other software products such as Adobe Reader (PDF).
When a malware is scanned inside a FortiSandbox VM environment, FortiSandbox scans its outgoing traffic for
connections to botnet servers and determines the nature of the traffic and connection hosts.

Fortinet Inc.
Change Log
Date Change Description
2021-12-02 Initial release.
2021-12-20 Updated File types on page 94.
2021-12-22 Updated HA-Cluster on page 169
2022-02-10 Updated HA-Cluster pre-requisites on page 171.
2022-02-14 Updated Default port information on page 12.
2022-02-17 Updated General Settings on page 113.

Fortinet Inc.
www.fortinet.com
Copyright© 2022 Fortinet, Inc. All rights reserved. Fortinet®, FortiGate®, FortiCare® and FortiGuard®, and certain other marks are registered trademarks of Fortinet, Inc., and other Fortinet names herein
may also be registered and/or common law trademarks of Fortinet. All other product or company names may be trademarks of their respective owners. Performance and other metrics contained herein were
attained in internal lab tests under ideal conditions, and actual performance and other results may vary. Network variables, different network environments and other conditions may affect performance
results. Nothing herein represents any binding commitment by Fortinet, and Fortinet disclaims all warranties, whether express or implied, except to the extent Fortinet enters a binding written contract,
signed by Fortinet’s General Counsel, with a purchaser that expressly warrants that the identified product will perform according to certain expressly-identified performance metrics and, in such event, only
the specific performance metrics expressly identified in such binding written contract shall be binding on Fortinet. For absolute clarity, any such warranty will be limited to performance in the same ideal
conditions as in Fortinet’s internal lab tests. Fortinet disclaims in full any covenants, representations, and guarantees pursuant hereto, whether express or implied. Fortinet reserves the right to change,
modify, transfer, or otherwise revise this publication without notice, and the most current version of the publication shall be applicable.

FortiSandbox 4.0.2 Administration Guide

Uploaded by

Copyright:

Available Formats

FortiSandbox 4.0.2 Administration Guide

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

FortiSandbox 4.0.2 Administration Guide

Uploaded by

Copyright:

Available Formats

Administration Guide

FORTINET VIDEO GUIDE

CUSTOMER SERVICE & SUPPORT

FORTINET TRAINING & CERTIFICATION PROGRAM

END USER LICENSE AGREEMENT

February 17, 2022

FortiSandbox 4.0.2 Administration Guide 3

FortiSandbox 4.0.2 Administration Guide 4

FortiSandbox 4.0.2 Administration Guide 5

FortiSandbox 4.0.2 Administration Guide 6

Key features of FortiSandbox include:

FortiSandbox 4.0.2 Administration Guide 7

FortiSandbox 4.0.2 Administration Guide 8

To connect to the CLI through the console port:

Serial line to connect to COM1

Speed (baud) 9600

Flow Control None

Connecting to the GUI

To connect to the FortiSandbox GUI:

FortiSandbox 4.0.2 Administration Guide 9

The following options are available:

Refresh Click the Refresh icon to refresh the page.

FortiSandbox 4.0.2 Administration Guide 10

To connect to the CLI Console:

The CLI Console pane opens.

2. Click Connect to connect to the console.

Connect / Toggles the connection to the console.

Clears the console.

FortiSandbox 4.0.2 Administration Guide 11

Closes the CLI Console.

The CLI Console can only connect to a local FortiSandbox.

Default port information

FortiSandbox 2000E, and 3000E default ports

Port Type Default Open Ports

FortiSandbox 4.0.2 Administration Guide 12

Port Type Default Open Ports

FortiSandbox 4.0.2 Administration Guide 13

Go to Dashboard > Status > System Information

Go to Dashboard > Status > System Information

Go to Dashboard > Status > System Information

Change the administrator password on page 19 Go to System > Administrators.

Change the GUI idle timeout on page 19 Go to System > Settings.

Go to Dashboard > Status > Licenses widget >

Go to Dashboard > Status > Licenses widget >

Toggle left-side menu style on page 21 Go to System > Settings.

Go to Dashboard > Status > Licenses widget >

Go to Dashboard > Status > System Resources

Go to Scan Job > File On-Demand > Submit File.

Update the firmware

Before any firmware update, complete the following:

FortiSandbox 4.0.2 Administration Guide 14

Firmware best practice:

To update the FortiSandbox firmware:

Change the system host name

To change the host name:

1. Go to Dashboard > Status > System Information widget > Hostname.

Backup or restore the system configuration

FortiSandbox 4.0.2 Administration Guide 15

To backup the FortiSandbox configuration to your local management computer:

1. Go to Dashboard > Status > System Information widget > System Configuration.