Pressure on Demand

Pneumatic Driven Liquid Pumps

 High Pressure
Haskel pneumatic driven liquid pumps are designed to provide a safe, reliable
and economical, source of hydraulic pressure.
This brochure introduces our pneumatic driven liquid pump range. Visit our
website at www.haskel.com for more information or to locate a distributor.

Why Use Haskel Pneumatic Driven Pumps?

Our pumps offer many advantages over electrically driven pumps:
• Safe pneumatic operation – no heat, flame or spark risk • No need for air line lubrication – saves costs and
• Up to 100,000 psi (7000 bar) capability prevents contamination
• Infinitely variable cycling speed • Robust, reliable, compact and easy to maintain proven
design
• Stall feature at pre-determined pressure to hold that
pressure without consuming power • Unbalanced cycling spool provides immediate response to
pressure changes
• Problem-free stop/start applications
• Also available in standard, or custom built power pac
• Easily automated – many modification and control options
configurations
• Suitable for most liquids and liquefied gases
• Excellent worldwide service for spares and repairs
• Alternative gas drive options – sour gas, natural gas,
• ATEX approved
boil off gases, nitrogen
• CE certified

Applications include:
• Pressure testing
• Work holding/power clamping
• Jacking/lifting
• Valve actuator control
• Hydraulic cylinder actuation
• Press safety overload devices
• Roller tensioning
• Metering
• Precision lubrication and
spraying
• Liquefied gas transfer

2 www.haskel.com
Pressure and Flow on Demand Double and Triple Air
This guide will help you to pre-select the pump ideally suited Head Pumps
for your application. If you have specific questions, however, Performance can be extended for the 1.5 hp pumps by stacking
we urge you to provide Haskel with the operational details air pistons without changing the hydraulic piston. Haskel
of your application. We will recommend a model and any multi-head pumps consume less air than competitive single
corresponding accessories. head pumps of the same area, as only one head is pressurized
on the return stroke; e.g., on a 1.5 hp pump additional heads
Output Horsepower Ratings can raise performance to 2 hp.
The pumps are categorized on their horsepower ratings (see Double air head pumps are identified by the last digit 2 in the
pages 6-7). These are approximate and peak at 100 psi (7 pump model number. Thus, a nominal 50:1 ratio pump with two
bar), assuming adequate drive, pressure and volume. Peak air heads is described as a 52. Similarly, a triple air head pump
horsepower is at about 75% nominal ratio x drive pressure, i.e. is identified with a last digit 3. Thus, a 900 ratio pump with three
100:1 pump @ 100 psi air drive peaks at 100 x 100 = 10000 x 0.75 air heads is described as a 903.
psi = 7500 psi (517 bar) hydraulic pressure.

Single Drive Head Pump

25.9 sq in (167 sq cm)

Operation
The pumps automatically reciprocate
on a differential piston principle. A large
piston driven by relatively low pressure
drive acts directly upon a smaller 0.65 sq in (4 sq cm)
hydraulic piston. Therefore, actual ratio = 40:1
The nominal ratio between piston sizes Nominal Ratio = 35:1
is indicated in the model coding and Double Air Head Pump
approximates to the maximum working
Area 25.9 sq in (167 sq cm)
pressure. The actual ratio is about
15% above nominal so that the pump
continues to cycle when drive pressure
equals nominal ratio. Initially, the pump Area 25.2 sq in (163 sq cm)
will cycle at maximum speed acting as a
transfer pump to pressurize downstream.
It will cycle at a slower rate as the
fluid meets resistance until it stalls
at maximum output pressure. When Area .65 sq in (4 sq cm)
a pressure drop downstream occurs, Therefore, actual ratio = 79:1
it will recycle as necessary in an Nominal Ratio = 72:1*
effort to maintain maximum pressure. Triple Air Head Pump
Stall pressure is achieved when
the outlet pressure rises and offers Area 25.9 sq in (167 sq cm)
more resistance to the reciprocating
differential piston assembly. The piston Area 25.2 sq in (163 sq cm)
assembly then stalls when the forces
balance, e.g. when drive pressure x drive Area 25.2 sq in (163 sq cm)
piston area equals outlet (stall) pressure
x driven hydraulic plunger area. The
pump design is sensitive to very small
pressure drops due to the low frictional
resistance of the large diameter drive Area .65 sq in (4 sq cm)
piston and hydraulic piston seals. Therefore, actual ratio = 118:1
Nominal Ratio = 103:1**
Nominal Ratio
* (2) Indicates Double Drive Piston
** (3) Indicates Triple Drive Piston

www.haskel.com 3
1. Drive Anatomy of a Pneumatic Driven Pump
Section
1. Drive Section
The piston, complete with “O” ring seal, operates in an epoxy filled,
fiberglass wound barrel, the diameter of which is constant throughout
a given series of pumps. Drive media forces the piston down on the
compression stroke and raises it on the suction stroke (M series have a
spring return). The piston is pre-lubricated during assembly and therefore
no air line lubricator is necessary.
2. Hydraulic Section/Check Valves
The drive piston is linked and connected to the hydraulic plunger/piston
in the hydraulic section. Outlet flow and pressure are determined by the
area of the hydraulic piston head, its nominal ratio with the drive piston
head, and drive pressure. On the down stroke, liquid in the hydraulic
section is forced under compression through the outlet check valve.
Fresh liquid is induced via the inlet check valve on the return stroke.
2. Hydraulic
Check
These check valves control the flow of liquid through the hydraulic
Valves section. They are spring-loaded and have a very low cracking pressure,
allowing maximum opening on the induction stroke. The pressure of
hydraulic fluid on the down stroke closes the inlet check valve and acts
against the spring to open the outlet check valve.
3. Drive Cycling Valve
This is a pilot-operated, unbalanced, lightweight spool, which directs
drive pressure, first to the top of the drive piston, and then to the
underside to reciprocate the piston (cycle). It actuates via pilot valves at
the top and the bottom of the stroke, which causes the unbalanced spool
to shift and reciprocate the piston.
4. Hydraulic Seal/Check Valves
This is one of the few wear parts. Its function is to allow the hydraulic
piston to reciprocate without passing fluid into the drive section. The liquid,
3. Drive its pressure and its temperature determine seal specification. A distance
Cycling piece can be incorporated between drive and hydraulic sections for
Valve complete contamination-free operation on most Haskel pumps.

4. Hydraulic
Seal

4 www.haskel.com
WETTED MATERIALS OF CONSTRUCTION AND SERVICES

WETTED MATERIALS
MODEL SERVICES NON METALLICS
(refer to pg. 17)
PUMP SECTION PLUNGERS

M 1 Cad plated steel, Aluminum & SS 416 SS Urethane, PTFE, Buna

MS 1, 2 All SS 316 SS UHMWPE, PTFE, Buna
.33 hp

29723 1, 2, 3, 5, 6 Separation - All SS Hard Chrome Plated 15.5PH SS + Dichronite UHMWPE, PTFE, Ryton
MDSTV 1, 2, 3, 4, 5, 6 Stainless Steel and Aluminum 303 Stainless Steel Viton, PTFE

4B-14 thru -37 1, 2 Aluminum Aluminum(Hard coated) UHWMPE, Buna

.75hp

4B-55 thru -100 1, 2 303 SS 440 C. SS UHWMPE, Buna

AW 1 Nickel Plated Steel & SS 440C SS Urethane, Buna N, PTFE

ASF 1, 2 All SS 440C SS UHMWPE, Buna, PTFE, Ryton
DSF 1, 2, 3, 5, 6 Separation - All SS 440OC SS Hard Chrome Plated UHMWPE, Viton, PTFE, Ryton
HF 1 Nickel Plated Steel & SS Stellite 15-5PH SS UHMWPE, Buna N
HSF 1, 2 All SS Stellite 15-5PH SS UHMWPE, Buna N
1.5 hp

DSHF 1, 2, 5, 6 Separation - All SS Stellite 15-5PH SS UHMWPE, Buna N

ATV 1, 2 Aluminum, Bronze & SS 15.5PH SS PTFE, Viton
DTV 1, 2, 5 Separation - Aluminum, Bronze & SS 15.5PH SS PTFE, Viton
DSTV-1.5 1, 2, 3, 4, 5, 6 Separation - All SS 17.4PH SS PTFE, Viton
DSTV 1, 2, 3, 4, 5 Separation - All SS 440C SS Hard Chrome Plated PTFE, Viton
DTN 1, 2, 5 Stainless Steel, Aluminum 300 Series SS Neopreen, PTFE

AW 1 Nickel Plated Steel & SS 440C SS Urethane, Buna N, PTFE

AFD 1 Nickel Plated Steel & SS 416 SS UHMWPE, Buna, PTFE, Ryton
DFD 1, 3, 5 Nickel Plated Steel & SS 416 SS UHMWPE, Viton, PTFE, Rtyon
ASFD 1, 2 All SS 15.5PH SS UHMWPE, Viton, PTFE, Rtyon
ASF 1, 2 All SS 440C SS UHMWPE, Viton, PTFE, Rtyon
DSFD 1, 2, 3, 5, 6 Separation - All SS 15.5PH SS UHMWPE, Viton, PTFE, Rtyon
DSF 1, 2, 3, 5, 6 Separation - All SS 440C SS Hard chrome plated UHMWPE, Viton, PTFE, Rtyon
2 thru 3hp

HF 1 Nickel Plated Steel & SS Stellite 15-5PH SS* UHMWPE, Buna N

HSF 1, 2 All SS Stellite 15-5PH SS* UHMWPE, Buna N
DSHF 1, 2, 5, 6 Separation - All SS Stellite 15-5PH SS* UHMWPE, Buna N
DSXHF 1, 2, 5, 6 Separation - All SS Stellite 15-5PH SS UHMWPE, Buna N
DSXHW 1, 2 Separation - All SS Stellite 15-5PH SS Urethane, PTFE
DSTV-1.5 1, 2, 3, 4, 5, 6 Separation - All SS 17.4PH SS PTFE, Viton
DSTV 1, 2, 3, 4, 5 Separation - All SS 440C SS Hard chrome plated PTFE, Viton
*Except -202 ratio is chrome plated 440 SS

GW 1 Nickel Plated Steel, SS & Bronze Hard chrome plated 15.5PH SS Urethane, Buna N, PTFE
GSF 1, 2 All SS & Bronze Hard chrome plated 15.5PH SS UHMWPE, Viton, PTFE, Ryton
DGSF 1, 2, 3, 5, 6 Separation- All SS & Bronze Hard chrome plated 15.5PH SS UHMWPE, Viton, PTFE, Ryton
DGSTV 1, 2, 3, 4, 5 Separation- All SS & Bronze Hard chrome plated 15.5PH SS Viton, PTFE, Ryton
GWD 1 Nickel Plated Steel & SS 15.5PH SS Hard chrome plate optional Urethane, Buna N, PTFE
6 hp

GSFD 1, 2 All SS & Bronze 15.5PH SS Hard chrome plate optional UHMWPE, Buena N, PTFE, Ryton
DGFD 1, 3, 5 Separation- Nickel Plated Steel & SS 15.5PH SS hard chrome plate optional UHMWPE, Viton, PTFE, Ryton
DGSFD 1, 2, 3, 4, 5, 6 Separation- All SS & Bronze 15.5PH SS Hard chrome plate optional UHMWPE, Viton, PTFE, Ryton
DGSTVD 1, 2, 3. 4, 5 Separation- All SS & Bronze 17.4PH SS Hard chrome plate optional PTFE, Viton

8SFD 1, 2 All SS & Bronze* Hard chrome plated 15.5PH SS UHMWPE, Viton, PTFE, Ryton
8DSFD 1, 2 ,3 ,5, 6 Separation- All SS & Bronze 15.5PH SS Hard chrome UHMWPE, Viton, PTFE, Ryton
8DTVD 1, 2, 3, 4, 5, 6 Separation- All SS & Bronze 15.5PH SS Hard chrome PTFE, Viton
8 hp

8HSFD 1, 2 All SS & Bronze* 17.4PH SS UHMWPE, Viton, PTFE, Ryton

8DSTVD 1, 2, 3, 5, 6 All SS & Bronze* 15-5 PH SS Hard chrome Viton, PTFE
8SFD2 1, 2 ,6 All SS & Bronze* 15-5 PH SS Hard chrome PTFE, Viton, UHMWPE

D14STD-125 1, 2, 3, 4, 5A All SS & Bronze Hard chrome plated 440C SS PTFE, Viton
D14STD-315 1, 2, 3, 4, 5A All SS & Bronze Hard chrome plated 440C SS PTFE, Viton
10 hp

D14SFD-125 1, 2, 3, 5A, 6 All SS & Bronze Tungston Carbide Coated 15.5PH SS UHMWPE, Viton, PTFE, Ryton
D14SFD-315 1, 2, 3, 5A 6 All SS & Bronze Tungston Carbide Coated 15.5PH SS UHMWPE, Viton, PTFE, Ryton

www.haskel.com 5
 Performance and Specification Overview
Maximum Rated Output Pressure

Air Head
Max Air
Displacement/Cycle Maximum Flow

Power
Pump Model Code Ratio Dash Actual Area Continuous Intermittent
no. Ratio
psi bar psi bar cu in ml cu in/min l/min

M, MDSTV -5 5.6 625 43 625 43 0.83 13.6 506 8.30

-7 7.8 900 62 900 62 0.60 9.8 366 6.00
M, MS
-12 14 1500 103 1500 103 0.36 5.9 234 3.83
-21 25
125 psi/8.6 bar

2600 179 2600 179 0.20 3.3 130 2.13

-36 41 4500 310 4500 310 0.12 2.0 78 1.28
0.33 hp
Single

M, MS, 29723
-71 82 8800 607 8800 607 0.06 1.0 39 0.64
-110 126 13500 931 13500 931 0.039 0.60 25 0.42
M, MS -188 217 15000 1034 15000 1034 0.023 0.40 18 0.29
29723 -188 217 10000 1034 10000 1034 0.023 0.40 18 0.29
MS -220 220 20000 1380 25000 1723 0.021 0.34 14 0.22

-14 16 1500 103 1500 103 0.9 14.7 428 7.01

-30 34 3200 221 3200 221 0.43 7.0 204 3.35
100 psi/7 bar

0.75 hp

-37 42
Single

4B 3800 262 3800 262 0.35 5.7 166 2.72

-55 63 6000 414 6000 414 0.22 3.6 105 1.71
-100 114 10600 731 10600 731 0.13 2.0 62 1.01

DSTV -1.5 1.6 240 17 300 21 31.90 513 5104 83.6

ATV, DTN, DTV -4 4.6 690 48 1200 83 20.00 328 3200 52.4
-B10 11.5 1600 110 1600 110 4.05 66.4 1215 19.9
-B15 17 2400 165 2400 165 2.70 44.3 810 13.3
-25 29 4000 276 4000 276 1.62 26.6 486 8.0
AW, ASF, DSF, DSTV -35 40 5700 393 5700 393 1.16 19.0 348 5.7
Single

1.5 hp

-60 69 9800 676 9800 676 0.67 11.0 201 3.3

-100 115 15000 1034 16500 1138 0.41 6.7 123 2.0
-150 173 15000 1034 20000 1379 0.27 4.5 81 1.3
-151 173 25000 1724 25000 1724 0.27 4.5 81 1.3
HF, HSF, DSHF -225 260 30000 2069 37000 2552 0.18 3.0 41 0.7
150 psi/10.5 bar

-300 345 30000 2069 50000 3448 0.14 2.3 32 0.5

HF -450 533 45000 3103 45000 3103 0.0 1.5 20 0.3

ATV -8 9.2 850 59 1200 83 20 328 3200 52.4

-B22 23 3200 221 3200 221 4.05 66.4 1215 19.9
-B32 34 4800 331 4800 331 2.70 44.3 810 13.3
AW, ASF, DSF, DSTV -52 57 5000 345 8000 552 1.62 26.6 488 8.0
-72 80 11000 759 11000 759 1.16 19.0 348 5.7
Double

2 hp

-122 138 15000 1034 19000 1310 0.67 11.0 201 3.3
-202 230 30000 2069 33000 2276 0.41 6.7 92 1.5
HF, HSF, DSHF
-302 346 30000 2069 50000 3448 0.27 4.5 61 1.0
-452 520 30000 2069 70000 4828 0.18 3.0 41 0.7
DSXHF
-602 690 30000 2069 75000 5172 0.14 2.3 32 0.5

-683 780 30000 2069 70000 4828 0.18 3.0 25 0.41

DXHF, DSXHF
-903 1038
Triple

30000 2069 75000 5172 0.14 2.3 20 0.33

100 psi/7 bar

2 hp

DSXHW -1373 1575 30000 2069 100000 6897 0.086 1.4 12 0.197

AFD-DFD-ASFD-DSFD -B60 69 6500 448 6500 448 1.34 2.2 369 6.0
2.2

-10 11.5 1600 110 1600 110 8.10 133 1823 29.9
-15 17 2400 165 2400 165 5.40 89 1215 19.9
-25 29 4000 276 4000 276 3.24 53.6 729 11.9
150 psi/10.5 bar

-35 40 5700 393 5700 393 2.32 38.0 522 8.6

ASFD
3 hp

-60 69 9800 676 9800 676 1.34 22.0 302 4.9

-100 115 15000 1034 16500 1138 0.82 13.4 185 3.0
-150 173 15000 1034 20000 1379 0.54 9.0 122 2.0
-202 230 30000 2069 33000 2276 0.82 13.4 144 2.4

GWD, GSFD, DGSFD, DGSTVD -12 14.8 1850 128 4000 276 15.9 260 5009 82.1
-35 40.3 4375 302 4375 302 6.0 98 1890 31.0
Single

GW, GSF, DGSF,

6 hp

-60 69 7500 517 7500 517 3.5 57 1103 18.1

DGSTV
-100 115 8000 552 10000 690 2.1 34 662 10.8

8SFD, 8DSFD, 8DSTVD -25 27.5 3575 246 4000 276 14.0 229 2660 43.5
125 psi/8.6 bar

-40 43.5 6000 414 6000 414 8.90 145 1691 28.0
8SFD
-65 73 10000 690 10000 690 5.40 88 1026 17.0
8DSFD -100 112 10000 690 10000 690 3.52 58 669 11.0
8 hp

8HSFD -225 253 25000 1724 25000 1724 1.56 26 296 5.0
-55 55 5500 379 7200 497 14.14 232 1900 31.1
8SFD2 -88 88 8800 607 10000 690 8.84 145 1182 19.36
(Double Air Drive Piston Models)
-224 225 25000 1724 25000 1724 3.53 58 476 7.6
D14STD, D14SFD -125 138 16000 1103 16000 1103 8.80 144.2 704 11.5
10 hp

-315 347 36000 2483 36000 2483 3.50 57.4 280 4.6

6
 Typical Performance using 100 psi (7 bar) Air drive
Outlet Pressure Outlet Flow Outlet Pressure Outlet Flow
Pump Selection Information
psi bar cu in/min l/min psi bar cu in/min l/min
All Haskel pumps are identified by letters coding the type of
225 15.5 500 8.20 415 29 249 4.09
300 21 350 5.70 600 41 160 2.6 pump, followed by a number indicating the practical working
700 48 200 3.28 1125 78 100 1.64 ratio of the drive area to the hydraulic plunger area. These
1500 103 90 1.48 2000 138 48.9 0.8 letters are explained in the chart below.
1700 117 70 1.15 3100 214 39.6 0.65
2450 169 tbd tbd 4500 310 tbd tbd
Pump Model Letter Coding
3000 207 40 0.64 6000 414 19 0.31
7500 517 20 0.33 10000 690 8.5 0.14 M .875” stroke .33 hp miniature pump series
5000 345 18 0.30 10000 690 14 0.23 S Stainless steel hydraulic piston and body
5000 345 18 0.30 10000 690 14 0.23 29723 .33 hp Chemical Pump
7500 517 15 0.24 15000 1034 12 0.2
D (Prefix) Pump incorporates a Distance Piece
700 48 400 6.55 1450 100 61 1.00 D (Suffix) Double Acting pump
1500 103 200 3.28 3000 207 62 1.00 4B 1” stroke .75 hp pump series (bottom inlet only)
1750 121 170 2.78 3500 241 82 1.33 A 2” stroke 1.5 + 2 hp pump series
2000 138 110 1.80 5000 345 66 1.08 H 2” stroke 1.5 + 2 hp High Pressure pump series
5000 345 57 0.93 10000 690 26 0.43
XH 2” stroke 1.5 + 2 hp Extreme High Pressure pump series
G 4.5” stroke 6 hp pump series
50 3 5000 81.9 150 10 1000 16.4
B 4.5” stroke 8 hp pump or booster series
100 7 1953 32 400 28 750 12.3
400 28 1000 16.4 990 68 500 8.19 14 4” stroke 10 hp pump series
750 52 598 9.8 1600 110 200 3.28 W Polyurethane U-cup dynamic seal
1000 69 403 6.6 2500 172 195 3.2 F UHMWPE (Ultra-high Molecular Weight Polyethylene Dynamic Seal
2000 138 350 4.1 3600 248 98 1.6 T Reinforced Teflon® dynamic seal
3000 207 152 2.5 6200 427 50 0.82
V Viton® o-ring static seal
4000 276 100 1.64 10000 690 24.4 0.4
7000 483 59.7 0.98 15000 1034 29.9 0.49
7000 483 59.7 0.98 15000 1034 29.9 0.49
7500 517 39.6 0.65 24000 1655 9.8 0.16
15000 1034 29.9 0.49 27000 1862 20.1 0.33
36000 2483 14.6 0.24 45000 3103 9.2 0.15

200 14 1953 32 800 28 750 12.3

400 28 799 13.1 2100 145 200 3.28
700 48 500 8.2 3000 207 152 2.50
1900 131 299 4.9 5000 345 98 1.60
2000 138 226 3.7 7500 517 50 0.82
4000 276 122 2.0 12000 828 40.2 0.66
7000 483 91.5 1.5 20000 1379 20.1 0.33
10000 690 45.2 0.7 30000 2069 15.2 0.25
10000 690 34.8 0.6 40000 2759 15.2 0.25
15000 1034 24.4 0.4 50000 3448 12.2 0.2

15000 1034 19.5 0.32 60000 4138 4.9 0.08

15000 1034 15.9 0.26 70000 4828 5.5 0.09
16000 1103 9.2 0.15 90000 6207 3.1 0.05

1000 69 348 5.7 5500 379 152 2.5

500 34 1520 24.9 1000 69 380 6.22

750 52 1030 16.9 1500 103 260 4.26
1000 69 662 10.9 2500 172 162 2.66
1500 1034 465 7.6 3500 248 100 1.64
3000 138 248 4.1 6000 414 56 0.92
5000 345 151 2.5 10000 690 41 0.67
7500 517 103 2.0 15000 1034 27 0.44 Guidelines for 24/7 Continuous
10000 690 63 1.0 20000 1379 47 0.77 Duty Applications for Maximizing
200 14 5004 82 1200 83 1454 24 Seal Life Performance
1000 69 1770 29 3500 241 600 9.8
2000 138 976 16 5500 379 397 6.5
Pump Series Maximum Cycles per Minute
2000 138 573 9.4 10000 690 195 3.2
0.3 hp 90 cpm
1000 69 2400 39.3 2500 172 280 4.6
0.75 hp 80 cpm
2000 138 1420 23.2 4000 276 200 3.27
3000 207 880 14.4 6000 414 310 5.08 1.5, 2.0 and 2.2 hp
60 cpm
5000 345 555 9.1 10000 690 163 2.67 (Single and Double Drive Piston)
10000 690 270 4.4 20000 1379 144 2.36 2.0 hp (Triple Drive Piston) 60 cpm
2500 172 1230 20.1 4000 276 675 11
4000 276 850 13.9 5000 345 800 13.1 3.0 hp 60 cpm
10000 690 315 5.2 18500 1276 140 2.3 6.0 hp 40 cpm
8000 552 488 8.0 12000 828 195 3.2
8.0 hp 40 cpm
15000 1034 238 3.9 30000 2069 79.3 1.3
10.0 hp 40 cpm

www.haskel.com 7
 .33 hp (.25 kW) M Series Pump Models

Maximum Working Pressure

Nominal Consult chart on page 6 for more information Displacement
Model Ratio regarding continuous/intermittent pressures. per Cycle

M, -5 625 psi (43 bar) .83 cu in (13.6 ml)

MDSTV

M, MS -7 900 psi (62 bar) .6 cu in (9.8 ml)

-12 1500 psi (103 bar) .36 cu in (5.9 ml)

M, MS, -21 2600 psi (179 bar) .2 cu in (3.3 ml)

29723* -36 4500 psi (310 bar) .12 cu in (2.0 ml)
-71 8800 psi (607 bar) .06 cu in (1.0 ml)
-110 13500 psi (931 bar) .039 cu in (0.6 ml)
-188 15000 psi (1034 bar) .023 cu in (.4 ml)

MS -220 25000 psi (1723 bar) .021 cu in (.34 ml)

*Note: 29723 series rated to 10,000 psi (690 bar) maximum (ratios -110 and -188)
Key Features
• Choice of 6 models, 9 ratios, • Pressures to 25,000 psi
27 possible combinations (1724 bar) For service codes, see page 17.
• Flows to 2 gpm (7.5 l/min) • All Hydraulic fluids, water For weights and dimensions, see page 18.

• Choice of wetted materials (plain or DI), solvents, mild

chemicals, liquefied gases
• Single air head
• Drive pressure 25 to
125 psi (1.8 to 9 bar)

Optional Modifications
Number Description

-HP Hand pump attachment (with handle). Provides manual operation of pump for
precision pressure control or use without air power
26220-2 Hand pump attachment kit.
29002 Viton air drive.
51331 EPR seals for liquid section for 29723-XX ratio pumps.
51788 Piped exhaust – standard. Provides connection ports for drive and pilot exhausts.
Enables under tank top mounting and/or natural gas drive.
51794 Piped exhaust – sour gas. With hand pump (HP).
51794-2 Piped exhaust – sour gas. Without hand pump (HP).
53175 Level II cleaning.
53304 High pressure outlet port. Fits ¼” O.D. high pressure threaded and coned tube.
53935 Low temperature drive. Enables operation down to 5°F. Some sacrifice of seal life at
normal temperature. M or MS series.
57905 No return spring. Provides improved fill on suction stroke pumping liquefied gases
by utilizing the inlet pressure. Only available on M and MS series.
59888 Cycle timer installed.
80103 Noise reduction kit fitted.
82367 SS trim for 1⁄3 hp drive

8 www.haskel.com
.75 hp (.56 kW) Pump Models

Maximum Working Pressure

Nominal Consult chart on page 6 for more information Displacement
Model Ratio regarding continuous/intermittent pressures. per Cycle

4B -14 1500 psi (103 bar) .9 cu in (14.8 ml)

-30 3200 psi (221 bar) .43 cu in (7.1 ml)
-37 3800 psi (262 bar) .35 cu in (5.7 ml)
-55 6000 psi (414 bar) .22 cu in (3.6 mil)
-100 10600 psi (731 bar) .13 cu in (2.1 ml)

For service codes, see page 17.

For weights and dimensions, see page 18.

Key Features
• One model available • Choice of wetted materials
in 5 ratios • Single air head
• Output pressures to • Drive pressure 3 psi to
10,000 psi (690 bar) 100 psi (.2 to 7 bar)
• Flows to 1.5 gpm (5.7 l/min)

Optional Modifications
Number Description

57639 Low drive air pressure. Allows user to regulate drive air to as low as 3 psi (.2 bar).
59354 Noise reduction kit fitted.
81575 Changes the “F” seal to a “W” seal. Recommend for use with water.
82104 Viton air drive.

www.haskel.com 9
 1.5 hp (1.12 kW) Pump Models

Maximum Working Pressure

Nominal Consult chart on page 6 for more information
Displacement
Model Ratio regarding continuous/intermittent pressures. per Cycle

DSTV(1) -1.5 160 psi (11 bar) 31.9 cu in (513.0 ml)

ATV, -4 1200 psi (83 bar) 20.0 cu in (328.0 ml)

DTV(1) (2)
DTN(1)
AW, ASF, -B10 1600 psi (110 bar) 4 cu in (66.4 ml)
DSF, DSTV -B15 2400 psi (165 bar) 2.7 cu in (44.3 ml)
-25 4000 psi (276 bar) 1.6 cu in (26.6 ml)
-35 5700 psi (393 bar) 1.2 cu in (19 ml)
-60 9800 psi (676 bar) .7 cu in (11 ml)

ATV -8 850 psi (59 bar) 20 cu in (328.0 ml)

Key Features
AW, ASF, -100 16500 psi (1138 bar) .4 cu in (6.7 ml)
• Choice of 10 models, • Choice of wetted materials
13 ratios, 50 possible DSF, -150 20000 psi (1375 bar) .28 cu in (4.5 ml)
• Single air head DSTV
combinations
• Drive pressure 3 to 150 ps
• Output pressures to (.2 to 10 bar) HF, HSF, -151 25000 psi (1724 bar) .28 cu in (4.5 ml)
50,000 psi (3448 bar)
DSHF -225 37000 psi (2551 bar) .18 cu in (3.0 ml)
• Flows to 22 gpm (83.0 l/min) -300 50000 psi (3448 bar) .14 cu in (2.3 ml)

HF -450 45000 psi (3403 bar) .09 cu in (1.5 ml)

Optional Modifications
Number Description

16821 Low air pressure control feature. For operating at air pressures as low as 3 to 4 psi (1) These series are “Lift” pumps and maximum outlet
(.2 to .3 bar). Includes 28881 modification. 45 psi minimum pilot air required. pressure is (air drive x pump ratio) + inlet pressure
(2) DTV has poppet checks
16831 Low temperature modification. For special sealing in air drive for operating
temperatures from as low as -20°F up to normal +120°F.

16834 Exhaust adapter. With back pressure balance piston.

27964 Interconnecting inlet-outlet tubing. ½” female for 4:1 ratio series pumps For service codes, see page 17.
(ATV-4 or DTV-4). For weights and dimensions, see page 20.
28000 Threaded vent (or purge) ports on standard distance piece. Except 1.5:1 ratio.
28881 Air pilot modification. 1⁄8” NPT. Allows remote start/stop of pump.
29376 Three-way cycling spool. For 1.5 hp and 2 hp single acting pumps, for use with CO2
29702 Single stroke modification.
51050 Extreme service cycling modification. Not recommended for long stall periods.
51056 Exhaust/pilot vent combination.
51331 EPR (Ethylene propylene) static seals in wetted section. Applies to distance piece
pumps only.

51345 Sour gas drive provision to N.A.C.E. specifications. 1.5 hp to 2.2 hp distance piece
pumps only, single air head and double air head.

52788 Viton seals air drive.

53925 Severe Arctic low temperature service. -25, -35, -60, -100, -150, -151, -225, -300, -450
ratios.

54885 Rotate pump body 90° from standard.

54935 SS trim for 5/3 air drive.
55516 Polyurethane (“W”) seal. For F or TV series pumps, except high output models.
59353 Noise reduction kit fitted. Not available on AFD, DFD, ASFD or DSFD.
82460 HNBR seals in air drive section.

10 www.haskel.com
1 . 5 1h
. 5p h( 1
p. 1
(12. 1
k2Wk
)WH )i gHhi gOhu O
t puuttp u t Mounting Brackets
F l oFwl oPwu m Pupms ps All series mounting brackets have 7/16” holes (slots) for 3/8”
All series mounting brackets have 7/16” holes (slots) for 3/8”
Available in a choice of 4 models, these high output, low bolts. Upper mounting brackets are not furnished as standard
bolts. Upper mounting brackets are not furnished as standard
Available in a choice of 4 models, these high output, low ratio
ratio pumps are capable of pressures to 1200 psi (82 bar) and
pumps are capable of pressures to 1200 psi (82 bar) and flow on single air head non-distance piece units.
flow rates of up to 22 gpm (83 l/min). These are “lift” pumps
rates of up to 22 gpm (83 l/min). These are “lift” pumps whereby
whereby the outlet pressure equals the air drive x the pump
the outlet pressure equals the air drive x the pump ratio plus the D
D ii m
meen
nssi o n a l D a t a Mounting B
B rr a
acck
kee tt s
s
ratio plus the inlet pressure.
inlet pressure.
Model DSTV-1.5 has a maximum air drive of 150 psi (10 bar)
Model DSTV-1.5 has a maximum air drive of 150 psi (10 bar) and
and is capable of pressures up to 160 psi (11 bar). The model
is capable of pressures up to 160 psi (11 bar). The model ATV,
ATV, DTN-4 and DTV-4 work on a maximum air drive of 150 psi
DTN-4 and DTV-4 work on a maximum air drive of 150 psi (10 bar)
(10 bar) and have a maximum intermittent pressure rating of
and have a maximum intermittent pressure rating of 1200 psi (83
1200 psi (83 bar). A noise reduction modification is available
bar). A noise reduction modification is available for applications
wherefornoise
applications where
level is an issue.noise level is an issue.

D i sD
tai sntcaen c
Pei eP
ciee c
(Se e(p
Saerpaat ri o
a tni)o n )
Pumps with prefix “D” in the model number have aluminum
Pumps with prefix “D” in the model number have aluminum Optional Pump Inlets for Tank Mounting
distance piece between the air drive and pump section
distance piece between the air drive and pump section (except
(except DSTV-1.5).
DSTV-1.5). Vent holes can be threaded ½” NPT female at extra To specify ratios To specify ratios
-10, -15, -22 or -32, -25 through -903,
cost. Specify modification number 28000. Horizontal mounting is add “BR” between add “B” between
the model number the model number
recommended for non-exchange of contaminants. and the ratio, e.g. and the ratio, e.g.
AW-BR10. AW-B25.
Inlet externally Inlet on the bottom
threaded 1 ¼” and externally
NPT male threaded
Internally threaded 1” NPT male
1” NPT female Internally threaded
½” NPT female

Drive inlet and exhaust are ½” NPT female. Drive inlet also includes a ½” NPT male x ½” NPSM female
(straight pipe thread) swivel adapter (connecting male nipple should include 30° inside bevel for proper fit).

www.haskel.com 11
 2 & 2.2 hp (1.49 & 1.64 kW) Pump Models

Maximum Working Pressure

Nominal Consult chart on page 6 for more information
Displacement
Model Ratio regarding continuous/intermittent pressures. per Cycle

AW, ASF, -B22 3200 psi (221 bar) 4 cu in (66.4 ml)

DSF, DSTV
-B32 4800 psi (331 bar) 2.7 cu in (44.3 ml)
-52 8000 psi (552 bar) 1.6 cu in (26.6 ml)
-72 11000 psi (758 bar) 1.2 cu in (19 ml)
-122 19000 psi (1310 bar) .7 cu in (11 ml)

HF, HSF, -202 33000 psi (2275 bar) .4 cu in (6.7 ml)

DSHF -302 50000 psi (3448 bar) .28 cu in (4.5 ml)

2 hp
DSXHF -452 70000 psi (4827 bar) .18 cu in (3.0 ml)
-602 75000 psi (5171 bar) .14 cu in (2.3 ml)

Key Features
DSXHF -683 70000 psi (4827 bar) .18 cu in (3.0 ml)
• Choice of 16 models, • Flows to 5 gpm (15 l/min)
-903 75000 psi (5171 bar) .14 cu in (2.3 ml)
13 ratios, 46 possible • Choice of wetted materials
combinations
• Double and triple air heads DSXHW -1373 100000 psi (6895 bar) .09 cu in (1.4 ml)
• Output pressures to
100000 psi (7000 bar) • Drive pressure 3 to
100 psi (.2 to 7 bar) AFD, DSFD, -B60 6500 psi (448 bar) 1.3 cu in (22 ml)
2.2 hp

DFD, ASFD
When using high pressure ratio pumps the reliability of the XH models
(-452 through -1373) will be improved with an air driven supercharge
pump, not only to simplify priming but to reduce fatigue stresses. The
higher the supercharge, the better the results. Also install a relief valve
to protect the lower pressure pump from potential back pressure.
Supercharging of the -1373 model is recommended. This approach will For service codes, see page 17.
ensure a reasonable life for the seals and other wear components. For weights and dimensions, see page 20.

3 hp (2.24 kW) Pump Models

For service
For service codes,
codes, see
see page
page 17.
17.
For
For weights
weights and
and dimensions,
dimensions, see
see page
page 20.
20.

Model Maximum Working Pressure

Nominal Consult chart on page 6 for more information
Displacement
Ratio regarding continuous/intermittent pressures. per Cycle

ASFD 10 1600 psi (110 bar) 8.1 cu in (132.8 ml)

15 2400 psi (165 bar) 5.4 cu in (88.6 ml)
25 4000 psi (276 bar) 3.3 cu in (53.2 ml)
35 5700 psi (393 bar) 2.3 cu in (38 ml)
60 9800 psi (676 bar) 1.3 cu in (22 ml)
100 16500 psi (1138 bar) .8 cu in (13.4 ml)
150 20000 psi (1379 bar) .6 cu in (9 ml)
202 33000 psi (2275 bar) .8 cu in (13.4 ml)

Key Features For service codes, see page 17.

For weights and dimensions, see page 21.
• One model available • Single air head
in 8 ratios • Drive pressure 3 to 150 psi
• Output pressures to (.2 to 10 bar)
33000 psi (2275 bar)
• Flow rates to 8 gpm (30 l/min)

12 www.haskel.com
Optional Modifications (for 2 hp, 2.2 hp and 3 hp pump models)
Number Description

16821 Assures reliable drive operation with pressures low as 3 psi as long as 20 psi or 55516 Polyurethane (“W”) seal. For F or TV series pumps, except high output models.
more is provided to the separate 1⁄8” NPT port.
59353 Noise reduction kit fitted. Not available on AFD, DFD, ASFD or DSFD.
16831 Low temperature modification. For special sealing in air drive for operating 55465 Ceramic Plunger -60 Ratio.
temperatures from as low as -20°F up to normal +120°F.
55516 Polyurethane “W” seal in “F” series pumps-except high output models.
16834 Exhaust adapter. With back pressure balance piston. 59353 Noise reduction kit fitted. Not available on AFD, DFD, ASFD or DSFD.
29376 Three-way cycling spool. For 1.5 hp and 2 hp single acting pumps. 59888 Cycle timer installed.
51050 Extreme service cycling modification. Not recommended for long stall periods. 82460 HNBR Seals in air drive section.
51056 Exhaust/pilot vent combination.
51331 EPR (Ethylene propylene) static seals in wetted section. Applies to distance piece
pumps only.

51345 Sour gas drive provision to N.A.C.E. specifications. 1.5 hp to 2.2 hp distance
piece pumps only, single air head and double air head.

52788 Viton seals. Air drive only – 1.5 hp to 2.2 hp pumps only.
53925-4 Severe Arctic low temperature service. -10, -15, -22, -32
54885 Rotate pump body 90° from standard. Except 3 hp pump.
54935 SS trim for 5/3 air drive.

www.haskel.com 13
 6 hp (4.47 kW) Pump Models

Maximum Working Pressure

Nominal Consult chart on page 6 for more information
Displacement
Model Ratio regarding continuous/intermittent pressures. per Cycle

GWD, -12 4000 psi (276 bar) 15.9 cu in (260 ml)

GSFD,
DGSFD(1),
DGSTVD(1)

GW, GSF, -35 4375 psi (302 bar) 6.0 cu in (98 ml)
DGSF, -60 7500 psi (517 bar) 3.5 cu in (57 ml)
DGSTV -100 10000 psi (690 bar) 2.1 cu in (34.5 ml)

(1) Double Acting “Lift” Pumps

Key Features
• Choice of 10 models, 4 ratios, • Single air head –
20 possible combinations double acting
For service codes, see page 17.
• Output pressures to • Drive pressure 3 to For weights and dimensions, see page 22.
10,000 psi (690 bar) 125 psi (.2 to 9 bar)
• Flow rates to 21 gpm (80 l/min) • All hydraulic fluids, water
(plain or DI), solvents Incorporating 10 models, this heavy duty range of double
• Choice of wetted materials acting pumps provide pressures up to 10,000 psi (690 bar)
and flow rates up to 4 gpm (15 l/min).
Designed to operate with air drive pressures between 40 and
125 psi (2.8 and 9 bar). For drive pressures 3 to 40 psi (.2 to
8 hp (5.97 kW) Pump Models 2.8 bar), order 51875-1 mod. 

Maximum Working Pressure

Nominal Consult chart on page 6 for more information
Displacement
Model Ratio regarding continuous/intermittent pressures. per Cycle

8SFD, -25(1) 4000 psi (276 bar) 14 cu in (229 ml)

8DSFD,
8DSTVD
8FD

8SFD -40 6000 psi (408 bar) 9 cu in (145.3 ml)

-65 10000 psi (690 bar) 5.4 cu in (88.2 ml)

8DSFD -100(1) 10000 psi (690 bar) 3.5 cu in (57.5 ml)

8SFD2 (1) -55 7200 psi (496 bar) 14 cu in (229 ml)

-88 10000 psi (786 bar) 8.83 cu in (144 ml)
-224 29000 psi (1724 bar) 3.5 cu in (57 ml)
Key Features
• Choice of 9 models, 8 ratios, • All hydraulic fluids, water 8HSFD -225(1) 25000 psi (1724 bar) 1.6 cu in (25.5 ml)
9 possible combinations (plain or DI), solvents,
• Pressures to 30,000 psi liquefied gases
(1) Double Acting “Lift” Pumps
(2068 bar) • Choice of wetted materials
• Flow rates to 11.5 gpm • Single air head – double acting
(44 l/min) • Drive pressure 3 to 125 psi
(.2 to 9 bar) For service codes, see page 17.
For weights and dimensions, see page 21.

14 www.haskel.com
10 hp (7.46 kW) Pump Models
10 hp (7.46 kW) Pump Models

Maximum Working Pressure

Nominal Consult chart on page 6 for more information Displacement
Ratio Maximum
Model Nominal regardingWorking Pressure pressures.
continuous/intermittent per Cycle
Displacement
Consult chart on page 6 for more information
Model Ratio (1) regarding continuous/intermittent pressures. per Cycle
D14STD 125 16000 psi (1103 bar) 8.8 cu in (144.2 ml)
D14STD 125(1)315(1) 16000 psi (1103 bar)
36000 psi (2482 bar) 3.5 cu8.8 cu in (144.2 ml)
in (57.4 ml)
315(1) 36000 psi (2482 bar) 3.5 cu in (57.4 ml)

D14SFD 16000 psi (1103 bar)

D14SFD 125(1)125(1) 16000 psi (1103 bar) 8.8 cu8.8 cu in (144.2 ml)
in (144.2 ml)
315(1)315(1) 36000 psi (2482 bar)
36000 psi (2482 bar) 3.5 cu3.5 cu in (57.4 ml)
in (57.4 ml)

(1) Double Acting “Lift” Pumps

(1) Double Acting “Lift” Pumps

For service codes, see page 17.

For weights and dimensions, see page 23.
For service codes, see page 17.
For weights and dimensions, see page 21.
Key Features
• Choice of 4 models, 4 ratios, • Drive pressure 3 to 125 psi Incorporating two basic models, this heavy duty range of double
Key Features
4 possible combinations (.2 to 9 bar) acting pumps provide pressures up to 36000 psi (2482 bar) and
• Choice of 4 models, 4 ratios, 4 possible combinations output flow rate up to 3 gpm (11 l/min).
• Pressures to 36000 psi • All hydraulic fluids, water
• Pressures to 36000 psi (2500 bar) (plain or DI), solvents,
(2500 bar) Incorporating two basic models, this
Operating from a maximum air drive pressure of 125 psi (9 bar),
• Flow rates to 3 gpm (11 l/min)
• Flow rates to 3 gpm (11 l/min) liquefied gases heavy
these pumpsduty
arerange of double
designed acting
for medium pumps
to high pressure service
• Drive pressure 3 to 125 psi (.2 to• 9 Choice of wetted materials
bar) provide pressures
with minimum maintenance. up to 36000 psi
(2482 bar) and output flow rate up to
• All hydraulic fluids, water (plain or DI), solvents, liquefied gases These large, slow speed pumps approach a seal life as high as 5
3 gpm (11 l/min).
times that of many smaller pumps and this advantage becomes
• Choice of wetted materials
Operating
ever greater infrom
heavya duty
maximum
serviceair drive water, or other liquids
involving
pressure of 125 psi
with negligible lubricity. (9 bar), these pumps
are designed for medium to high pressure
service with minimum maintenance.
Optional Modifications (for 6 hp, 8 hp and 10 hp pump) These large, slow speed pumps approach
Number Description a sealDescription
Number life as high as 5 times that of
Optional Modifications (for 6 hp, 8 hp and 10 hp pump) many smaller pumps and this advantage
C Air controls. 54312 Extreme service cycling modification – for 6 hp thru 10 hp pumps.
Number
17860
Description
Electrical stroke counter provision (includes BZE6-2RQ micro switch).
becomes ever greater in heavy duty
54936 Exhaust/pilot vent combiner.
29125 External pilot modification – for 6 hp thru 10 hp pumps. service involving water, or other liquids
25721 Mechanical stroke counter installed (6 digit). 55330 Interconnecting tubing 8DSFD-100 low pressure inlet.
87410 Low air pressure control – for 6 hp thru 10 hp pumps. with negligible lubricity.
29077 Interconnecting tubing – 6 hp and 8 hp pumps, double ended. 55330-1 Interconnecting tubing 8DSFD-100 high pressure inlet.
54030 Sour gas air drive provision to NACE spec. 6 hp distance piece pumps only.
29077-1 Interconnecting tubing – 6 hp and 8 hp pumps, double ended low ratio pumps. 55366 Interconnecting tubing 8DSFD-225.
54936 Exhaust/pilot vent combiner.
29078 Same as 29077, 29077-1 double ended w/distance piece. 57002 Viton seals – air drive only – 6 hp.
57002 Viton seals – air drive only – 6 hp
29078-1 Same as 29077, 29077-1 double ended w/distance piece low ratio pumps. 57944 Viton seals – air drive only – 8 hp.
57944 Viton seals – air drive only – 8 hp
29079
59888 Interconnecting tubing – 10 hp pumps.
Cycle timer installed. 59888 Cycle timer installed.
29125 External pilot modification – for 6 hp thru 10 hp pumps. 82500 ATEX modification available for 6 hp only, not available on 8 hp or 14 hp drive, nor on
GW, GSF, DGSF, GSFD, or DGSFD models.
29702-2 Single stroke.
51875-1 Low air pressure control – for 6 hp thru 10 hp pumps. 86337 Extended life air drive.
54030 Sour gas air drive provision to NACE spec. 6 hp distance piece pumps only.

www.haskel.com 15
www.haskel.com 15
 P o w e rr S
Syysstteem
m SSppeecci iaal li s
i st s
ts Quuaalliittyy a
Q an nd
World safety standards
standards and andquality
qualitydemands
demandsarearerising.
rising. Afftteerr--S
A Saall e
e Service
Component manufacturers
manufacturers are arerequired
requiredto
toprovide
providetest
test Haskelmeets
Haskel meetsthetherequirements
requirementsofofinternational
certification and
and product
product quality
qualityassurance
assurancewhich
whichcan canonly
onlybebe international
quality quality
assurance ISOassurance
9001. BuildISO 9001.is
quality
determined using
using the
the types
typesof
ofsystems
systemswhich
whichHaskel
Haskelcan canprovide.
provide. Build quality
matched by anisinnovative
matched by an innovative
design and problem
Typically, we have
have built
built systems
systemsfor
forproduction
productionand
andfield
fieldtesting
testing design andability
solving problem solving
which stemsability
from which
years of stems
yearsfrom years of
of experience.
the proof, leak,
leak, and
and burst
burstaspects
aspectsofofhoses,
hoses,cylinders,
cylinders,andandvalves.
valves. years
Our of experience. Our
representatives representatives
around the world are around the world
carefully chosenareand
These systems can can be
be portable,
portable,mobile,
mobile,or
orstatic
statictest
testrigs.
rigs.We
We also carefully
trained chosen
to help and
you trained
arrive atto
a help you
correct arrive
product at a correct
choice, and to offer
also
offeroffer a range
a range of standard
of standard pressure
pressure packs
packs usedused for power
for power jacking, product
a choice,
maintenance and
andto offer
parts a maintenance
service that is and
second parts
to service
none.
jacking,
clamping,clamping,
and other and other applications
applications where reliable
where reliable power is needed. that is second to none.
power
is needed.
Selecting Your Accessories
Haskel can either provide accessories separately or supply them fitted to form a complete
package suited to your application. Additionally, Haskel can customer nominated
accessories. Our accessories catalog is available and our technical support team is always
ready to advise you on the most suitable choice of accessories for your application.
• Air pilot switches • High pressure valves, fittings and • Stainless steel check valves
• Air pilot valves tubing Intensifiers with integral checks for
• Regulating relief valves • Plenum chambers cycling
• Directional control and release valves • Port adapters • Capillary type gauge snubbers
• Hydraulic accumulators, gas receivers • Gauge snubbers Please ask for your copy of our latest
and storage cylinders • Filters accessories brochure.

16 www.haskel.com
Liquids Compatible with Services
Services
Haskel Pumps hphp Model
Model 1 1 2 2 3 3 4 4 5 5 66

To assist in easier pump selection, we have classified various MM ••

popular liquids in groups and assigned to each group a service
MS
MS •• •• ••
.33
MDTV
MDSTV •• •• •• • •• ••
code. These service code numbers are featured in the chart to .33
29723
MDSTV •• •• •• • •• ••
the right and are designated for each pump series. Seals and
other wetted materials can be supplied to suit your preferred MCPV • • • • • •
liquid. For advice, please contact our technical services 4B29723
-14 to -37 •• •• • • ••
.75
personnel at 818-843-4000. 4B -55 to -100 • • •
4B -14 to -37 • • •
.75
4B -55 to -150 • • •
Services AW •
ASF
AW •• • •
Service Codes •
DSF • • • •
1 Petroleum-based oils, kerosene, ethylene glycol,
ASF • • •
HF • •
water with 5% soluble oil.
DF • • • •
HSF • •
•• •• • •• ••
DSF
2 Plain water, diesel fuel. DSHF

3 Most phosphate ester-based hydraulic

HF
DSTV •• •• • • • •
e.g. Pydraul, Lindol, Cellulube, Fyrquel, and Houghtosafe
1.5
2
HSF
ATV •• •• • ••
2.2
DHF
DTV •• •• •• •
1120 and petroleum-based solvents compatible with ••
DSTV-1.5
DSHF •• •• • • ••
UHMWPE (Ultra-high Molecular Weight Polyethylene) AFD
DSTV •• • •• • • •
dynamic seals and Viton static seals. 1.5
2 DFD
ATV •• • •• • •
4 Petroleum-based solvents, e.g. aromatic hydrocarbons 2.2 ASFD •• •• ••
DTV •
(benzene, toluene, xylene, hylene, etc.); chlorinated solvents DSFD •• •• •• •• •
DSTV -1.5 • •
(trichlorethylene, carbon tetrachloride, chlorobenzine, etc.); DSXHF • • • •
AFD • • •
mercaptans, Dowtherm A, solvents DSXHW • •
etc.); Dowtherm E,
DFD • • •
plus all of Group 3 and some mildly corrosive acids compatible
ASFD • • •
3 ASFD •• •• •
with wetted materials. See note 5A for service with methyl- DSFD • • •
ethyl-ketone, methyl acetone, diacetone, alcohol and freon 22. DXHF • • •
GW
DSXHF •• • • ••
5 Skydrol and Aerosafe hydraulic acetone and some GSF •• •• ••
DSXHW
alcohols (ethyl, methyl, and isopropyl). DGSF • • • • •
5A. Also suitable for these if Viton static seals are 3 DGSTV
ASFD •• •• • • • ••
replaced with EPR; specify number 51331 (no 6 GWD •
extra charge); e.g., 51331-MDTV-5. Most phosphate ester- GSFD
GW •• • • • ••
based solidify at approximately 30000 psi. DGFD
GSF •• • • • •
6 Deionized water; demineralized water. DGSFD
DGF •• • •• • •• •
DGSTVD
DGSF •• •• •• • •• ••
Note: Dynamic seal life with non-lubricating fluids will
understandably be less than with lubricating types. DGSTV • • • • • •
6
8FD
GWD •• •
8SFD
GSFD •• •• •• • •• ••
Operating Temperatures •
8
8SFD2
DGFD •• • •• • ••
Drive Section 8DSFD •• •• •• •• •
DGSFD • •
-4° (25°F) to +65°C (150°F) (low temperature seals are available 8DSTVD • • • • •
DGSTVD • • • • • ••
for Arctic operation). 8HSFD • • • • •
Liquid Section 8FD • •
D14STD-125
8SFD •• •• •• •• •• ••
For reasonable seal life, high temperature should be limited ••
D14STD-315
8SFD2 •• •• •• •• ••
to 54° C (130° F), for F and W seal models, 135° C (275° F) for T 10
•
8 D14SFD-125
8DFD •• • • •
and TV models (with distance piece). D14SFD-315 • • • • •
8DSFD • • • • •
8DSTVD • • • • •
8HSFD
• • • • • •
D14STD -125 • • • • • •
D14STD -315 • • • • • •
10
D14SFD -125 • • • • •
D14SFD -315 • • • • •

www.haskel.com 17
 NB. Plan view of
M-Pump is common to
all M-Series pumps.

Net weight 2.65 kg

Boxed weight 2.9 kg
Box size 23 x 18 x 12 cm

1.91 mm
(.075”)

Weights and
Dimensions 206 mm
(8”)

.33 hp (.25 kW) M Series Pump Models M-7, M-12 MS-7, MS-12
approx. weight 9 lbs (4 kg) approx. weight
9 lbs (4 kg)

Net weight 4 kg
Boxed weight 4.25 kg
Box size 23 x 18 x 12 cm
Net weight 6 kg
Boxed weight 6.5 kg
Box size 30 x 20 x 15 cm

Net weight 2.5 kg

Boxed weight 2.75 kg
Box size 23 x 18 x 12 cm

MS-21, MS-36, MS-71, M-21, M-36, M-71, M-110, MS-220 approx. weight M-5 approx. weight 9 lbs (4 kg)
MS-110, MS-188, approx. M-188 approx. weight 6 lbs 6 lbs (2.7 kg)
weight 6 lbs (2.7 kg) (2.7 kg)

18 www.haskel.com
 29723-21, 29723-36, 29723-71, 29723-110 MDSTV-5 , MDTV
approx. weight
29723-21,
29723-21, 6.529723-36,
29723-21,
29723-36,lbs29723-71,
29723-36, (329723-71,
kg)
29723-71,
29723-110
29723-110
29723-110 Approx
MDSTV-5weight
MDSTV-5
MDSTV-5
, MDTV ,15
, MDTV 1/2 lbs (7 kg)
MDTV
approx.
approx.
approx.
weight
weight
weight
6.5 lbs
6.56.5
lbs
(3 lbs
kg)
(3 (3
kg)kg) Approx
Approx
Approx
weight
weight
weight
15 1/2
1515
lbs
1/21/2
lbs
(7 lbs
kg)
(7 (7
kg)kg)

.75 h . 7p5 ( h
. 5p6 (k . 5W6) kPWu )mPpuMmopd M
e losd e l s
. 7.57. 75h5phh
p( p
.5
( .(65. 5
6k6W
kkW
)WP
) )u
PmP
uum
pmpM
pMoM
doe
o
dldese
l sl s

Model 4B-14,
ModelModel
Model 4B-21,
4B-14,4B-14,
4B-14, 4B-25
4B-21,and 4B-30
4B-21,
4B-21,
4B-25 4B-25
4B-25
andand
4B-30
and
and
4B-30 4B-30
4B-30

Model Model
Model
4B-55 4B-55
4B-55
andandand
Model 4B-55 and
4B-75 4B-75
4B-75
4B-75

www.haskel.com
www.haskel.com
www.haskel.com19 19
www.haskel.com
www.haskel.com 19 19
 1.5 hp, 2 & 2.2 hp (1.12, 1.49 & 1.64 kW) Pump Models

DSFD-B60

Net weight 18 kg
Boxed weight 20 kg
Box size 68 x 42 x 50 cm

Net weight 10 kg
Boxed weight 11 kg
Box size 37 x 37 x 38 cm

25.4 mm = 1 inch

1.5 and 2 hp low ratio pumps; 2 hp high ratio pumps;

-B10 and -B15 ratios -683 and -903 ratios

Net weight 14 kg
Boxed weight 15 kg
Box size 52 x 40 x 40 cm

(-52, -72, +22)

1
⁄4 HP port (-202, -302)

1.5 and 2 hp medium ratio pumps;

-52, -72, -122, -202 and -302 ratios
2 hp (1.49 & 1.64 kW) Pump Models;
20 www.haskel.com
-1373 ratio
. 7 5. 7h5p
. 7h(5.p5h(p
. 5(k.6W
6 5 6k
)WPW
k )u m
P
) u
Pm
p popM
uMm olds
d eM oed(le
slos(nc(toc
c . )notn. )t . )

ModelModel
4B-37 4B-37
approx.
approx. weightweight
10 lbs 10
(4.5lbs
kg)(4.5 kg)

ModelModel
4B-1004B-100
4B-100 & 4B-150
& 4B-150
approx.
approx.
approx. weightweight
weight 11 lbs(511
11lbs lbs (5 kg)
(5kg)
kg)

1 . 51 h
. 5p
1 ,.h52
p&, p
h 2 .,&22
2 2h. 2p
& 2 .h(21
p .h1
(p
12.,(111
2..,142
19,. 4&
19. 1
4&.9614
&. 6k14W
. 6k Wu
)4P k) m
Pu
W p
)PmM
upm
oM
dpeoM
ldso
e ldse l s

DSFD-B60
DSFD-B60

www.haskel.com21
www.haskel.com
511.h.5
15
p. h
,5hp
2p
h,&
,p2
2,2&
.&
22&
2.h.2
22
p. h
2h
(p1p
h.(p
1(11
2.(.,1
112
.12
1,.,2
41,1
9. .4
14
&9
.9
41&
9&
. 6&
11
4. .6
16
k4
.4
W
6k4)kW
P
Wku
)W
)P
mP)up
u
Pmm
uM
ppoM
m pd
MoeM
od
ld
s
oee
dl(ls
cslo(s(c
e nco
(to
.n)n
c ot tn
. .)t) . )

Net weight 18 kg
Net weight 18 kg
Net weight 18 kg
Boxed weight 20 kg
Boxed weight 20 kg
Boxed weight 20 kg
Box size 68 x 42 x 50 cm
Box size 68 x 42 x 50 cm
Box size 68 x 42 x 50 cm
Net weight 10 kg
Net weight 10 kg
Net weight 10 kg
Boxed weight 11 kg
Boxed weight 11 kg
Boxed weight 11 kg
Box size 37 x 37 x 38 cm
Box size 37 x 37 x 38 cm
Box size 37 x 37 x 38 cm

1.5 and
1.5
1.5
2and
hp
and
low
2 2hphp
ratio
low
lowpumps;
ratio
ratiopumps;
pumps;
-B10 and
-B10
-B10
-B15
and
andratios
-B15
-B15ratios
ratios

Net weight 14 kg
Net weight 14 kg
Net weight 14 kg
Boxed weight 15 kg
Boxed weight 15 kg
Boxed weight 15 kg 25.4 mm
25.4
25.4
=mm
1
mminch
==1 1inch
inch
Box size 52 x 40 x 40 cm
Box size 52 x 40 x 40 cm
Box size 52 x 40 x 40 cm
2 2hphpratio
2 hp high high ratio
ratiopumps;
highpumps; pumps;
-683
-683 and
-683 and
-903
and-903
-903ratios
ratios ratios

1
⁄2” NPT
⁄2”⁄2”(-52,
1 1
NPT
NPT-72,
(-52,
(-52,
122)
-72,
-72,122)
122)
LiquidLiquid
Liquid
Outlet Outlet
Outlet 394 mm 394394 mm mm Breathers
Breathers
Breathers
(15 1/2”) (15 1/2”)
(15 1/2”)
1
⁄4 HP1port
⁄41⁄HP
4 HP (-202,
port
port(-202,
-302)
(-202,-302)
-302)

Air DriveAir
Inlet
Air
Drive
Drive
Inlet
Inlet
1/2” NPT1/2” NPT
1/2” NPT

1.5 and
1.5
1.5
2and
hp
andmedium
2 2hphpmedium
medium
ratio pumps;
ratio
ratiopumps;
pumps;
-52, -72,
-52,
-52,
-122,
-72,
-72,-202
-122,
-122,
and
-202
-202
-302
and
andratios
-302
-302ratios
ratios
Liquid Inlet
Liquid
Liquid
Inlet
Inlet Liquid Outlet
Liquid
Liquid
Outlet
Outlet
Air Exhaust
Air Exhaust
Air Exhaust 1/2” NPT1/2” NPT
1/2” NPT 3/4” HP Port
3/4” HP Port
3/4” HP Port
1/2” NPT1/2” NPT
1/2” NPT

241 mm 241241 mmmm 245 mm 245245 mmmm

(9 1/2”) (9 1/2”)
(9 1/2”) (9 5/8”) (9 5/8”)
(9 5/8”)
Net weight 10 kg
Net weight 10 kg
Net weight 10 kg
Boxed weight 11 kg
Boxed weight 11 kg
Boxed weight 11 kg
Box size 45 x 37 x 44 cm
Box size 45 x 37 x 44 cm
Box size 45 x 37 x 44 cm 2 hp (1.49
2 2hphp&
(1.49
(1.49
1.64&kW)
&1.64
1.64
pump
kW)
kW)pump
models;
pumpmodels;
models;
-1373-1373
ratio
-1373ratio
ratio

Net weight 18 kg
Net weight 18 kg
Net weight 18 kg
Boxed weight 19 kg
Boxed weight 19 kg
Boxed weight 19 kg
Box size 45 x 37 x 44 cm
Box size 45 x 37 x 44 cm
Box size 45 x 37 x 44 cm

ATV-4ATV-4
pumps;
ATV-4pumps;
pumps;
double
double
double
acting,
acting,
acting,
high output
high
highoutput
output
Note: For model DTV-4,
Note: For model DTV-4,
Note: For model DTV-4,
add distance
add
add
distance
piece
distance
dimension
piece
piece
dimension
dimension
from page
from
from
11.page
page
11.11.
Interconnecting
Interconnecting
Interconnecting
inlet andinlet
outlet
inlet
andand
port
outlet
outlet
tubing
port
port
shown.
tubing
tubing
shown.
shown.

DSTV-1.5
DSTV-1.5
DSTV-1.5
pump;pump;
single
pump;single
single
www.haskel.com
acting,
acting,
acting,
high output
high
highoutput
output
www.haskel.com
222 22 www.haskel.com
www.haskel.com
 Net weight 9.5 kg
Net weight 9.5 kg
Boxed weight 10 kg
Boxed weight 10 kg (9 7/8”)(9 7/8”)
11 mm 11 mm 76 mm 76 mm Mounting 119 mm119 mm
Mounting
Box size 25 x 26 x 22 cm
Box size 25 x 26 x 22 cm BracketBracket (4 11/16”)
(4 11/16”)
(7/16”) (7/16”)
(TYP) (TYP) (3”) (3”) (2 places)
(2 places)

HandleHandle

1
⁄2” NPT
1
⁄2” NPT 279 mm279 mm
LiquidLiquid (11”) (11”)
64 mm 64 mm
413 mm413 mmAir Drive Air Drive Air Drive
AirInlet
DrivePort
Inlet Port
Outlet*
Outlet* (15 1/4”)(15 1/4”)ExhaustExhaust
Port Port (2 1/2”)(2 1/2”) 1/2” NPT1/2” NPT
1/2” NPT
1/2” NPT

154 mm154 mm
17 mm 17(6mm1/16”)(6 1/16”) 105 mm105 mm
(11/16”)(11/16”) (4 5/32”)(4(TYP)
5/32”) (TYP)

1.5 and
1.5 2and
hp 2medium
hp medium
and high
and high
ratios;
ratios;
-25 -25 Hydraulic
Hydraulic
Outlet Port
Outlet Port Hydraulic
Hydraulic
Inlet Port
Inlet Port
1/2” NPT
1/2” NPT 144 mm144 mm 1/2” NPT
1/2” NPT
through
through
-150,-150,
-151*,
-151*,
-225*,
-225*,
-300*-300*
and -450*
and -450*
ratios
ratios (2 places,
(2 places,
this side)
this side) (5 11/16”)
(5 11/16”) (2 places,
(2 places,
this side)
this side)
102 mm102 mm
(4”) (4”)
*1⁄4” Super
*1⁄4” Super
Pressure
Pressure
Outlet
Outlet
Port Port 209 mm209 mm
(8 1/4”)(8 1/4”)
ATV-8
ATV-8
pumps
pumps

AFD AFD
or ASFD,
or ASFD,
-B60,-B60,
-B100-B100
pumps;
pumps;
double
double
acting,
acting,
highhigh
output
output

3 h
3 ph3(p2h.( p
2
24 . 22k
4W k4)WP ) uPmup
muMpmoMdoeM
dl se ldse l s
h p( 2( .22.(4
3 3h p 2 4.k2W
kW ) k)PWu)m
P P
ump pMMopd
oed leo
sl s

AIR DRIVE
AIR DRIVE
INLET INLET
PORT PORT
1/2” NPT
1/2” NPT

MODEL OUTLET PORT INLET PORT

ASFD-25
ASFD-25
ASFD-25
ASFD-25
ASFD-35,
ASFD-35,
ASFD-25ASFD-35,
ASFD-35,
ASFD-60
ASFD-60
ASFD-15
ASFD-15 ASFD-35ASFD-60
ASFD-60
1/2” NPT

}}} }
ASFD-15
ASFD-15 ASFD-100
ASFD-100
ASFD-100
ASFD-100 3 3⁄83" med.
3
⁄8" med.
⁄8" med.
⁄8" med.
ASFD-150
ASFD-150
ASFD-60ASFD-150
ASFD-150 pressure
pressure pressure
pressure
1/2” NPT

OUTLET PORT PORT

OUTLET OUTLETOUTLET
PORT PORT
ASFD-100 3/8” MEDIUM
1/2” NPT
1/2” NPT 1/2” NPT
1/2” NPT PRESSURE
ASFD-150 9/16-18 THREAD

ASFD-10
ASFD-10
ASFD-10
ASFD-10

OUTLETOUTLET
PORT PORT

ASFD-202
ASFD-202
1/2” NPT
1/2” NPT

ASFD-202
ASFD-202
www.haskel.com
www.haskel.com
www.haskel.com2323
 6 hp (4.47 kW) Pump Models

Net weight 31 lbs (14 kg)

Boxed weight 35 lbs (16 kg)
Box size 52 x 39 x 39 cm

All models have 2 off 11⁄4”

NPT air exhaust ports
and 1 off 3⁄4” NPT air drive
inlet ports.

Models GW, GSF nominal ratio 35, 60 100:1

Net weight 41 lbs (18.5 kg)

Boxed weight 48 (22 kg)
Box size 66 x 41 x 49 cm

Models DGSF, DGSTV

DGF, DGSF, nominal
DGSTV ratio 35,
nominal 60 100:1
ratio 35, 60 100:1

Net weight 57 lbs (26 kg)

Boxed weight 61 (27 kg)
Box size 66 x 41 x 49 cm

If interconnecting piping for the two

inlets and two outlets is required, specify
modification 29077 with your order.

Models GWD, GSFD nominal ratio 12:1

Net weight 66 lbs (30 kg)

Boxed weight 75 lbs (34 kg)
Box size 91 x 51 x 39 cm

If interconnecting piping for the two inlets and two outlets

is required, specify modification 29078 with your order.

Models DGSFD,
DGFD, DGSFD,
DGSTV DGSTVD nominal
nominal ratio 12:1 ratio 12:1
24 www.haskel.com
88 hhp
8p (h(5p
5. .99
(757.k9kW
7W)k) P
WPu)um
m
Ppu
pmM
MpoodM
dee
ol ls
dse l s

9.65 9.65
[245 [245
mm] mm]
27.6627.66
5.21 5.21 [703 [703
mm] mm]
[132 [132
mm] mm]
AIR DRIVE
AIR DRIVE INLETINLET 22.9322.93
PORTPORT
3/4" 3/4"
NPTNPT [582 [582
mm]mm]
(130(130
PSIGPSIG
MAX)MAX)
CYCLING
CYCLING SPOOL
SPOOL ACCESS
ACCESS

2X LIQUID
2X LIQUID
INLET
INLET
PORTPORT
3/8" 3/8"
HIGHHIGH
PRESSURE
PRESSURE
(25,000
(25,000
PSIGPSIG
MAX)MAX)

10.9610.96
[278 [278
mm] mm]

10.1710.17
2X DRIVE/SEAL
2X AIR AIR DRIVE/SEAL SECTION
SECTION [258 [258
mm] mm]
VENTVENT
PORTPORT
1/4" 1/4"
NPTNPT
4.88 4.88
[124 [124
mm] mm]
2X LIQUID OUTLET
2X LIQUID PORT
OUTLET PORT
3/8" 3/8"
HIGHHIGH
PRESSURE
PRESSURE
(25,000 PSIGPSIG
(25,000 MAX)MAX)

7.00 7.00
[178 [178
mm] mm] 5.78 5.78 11.3611.36
[147 [147
mm] mm] [288 [288
mm] mm] 4X MOUNTING HOLES
4X MOUNTING HOLES
8.25 8.25 n 9/16"
n 9/16"
[210 [210
mm] mm]

Model
Models8HSFD-25
Models 8HSFD-25,
8HSFD-25,8FD-25,
8FD-25,8SFD-25
8SFD-25
Inlet,
Inlet,Outlet
Inlet, Outletports
Outlet ports3/8’’
ports 3/8’’HP
3/8” HP

Models8DSFD-25
Models 8DSFD-25&&8DSTVD-25
8DSTVD-25

Model
Model8SFD-40
8SFD-40

Model
Model8SFD-65
8SFD-65

www.haskel.com
www.haskel.com
www.haskel.com25 2
8 h8p h( 5
p. 9
(57. 9
k7Wk
)WPu
) m
Pup mMpo d
Meold
s e(lc
so(ncto. )n t . )

8X .53 in [13 8mXm] .53 in [13 mm]

(MOUNTING HOLES
(MOUNTING HOLES

32.73 in [831 mm]

32.73 in [831 mm] 9.65 in [245 mm]
9.65 in [245 mm]

AIR DRIVE INLET

AIR DRIVE INLET
3/4 NPT 3/4 NPT

2X HYDRAULIC2XOUTLET
HYDRAULIC OUTLET
1" NPT PORT 1" NPT PORT
11.10 in [282 mm]
11.10 in [282 mm]
10.17 in [258 mm]
10.17 in [258 mm]

4.88 in [124 mm]

4.88 in [124 mm]
2X HYDRAULIC2XINLET
HYDRAULIC INLET
1 1/4" NPT PORT
1 1/4" NPT PORT

18.11 in [460 mm]

18.11 in [460 mm] 4.25 in [108 mm]
4.25 in [108 mm]

19.55 in [496 mm]

19.55 in [496 mm] 7.00 in [178 mm]
7.00 in [178 mm]

8.25 in [210 mm]

8.25 in [210 mm]
26.48 in [673 mm]
26.48 in [673 mm]

29.92 in [760 mm]

29.92 in [760 mm]

ModelModel
8SFD2-55
8SFD2-55

8X .53 in [13 8mXm] .53 in [13 mm]

(MOUNTING HOLES)
(MOUNTING HOLES)
9.65 in [245 mm]
9.65 in [245 mm]
33.80 in [858 mm]
33.80 in [858 mm]

AIR DRIVE LETAIR DRIVE LET

3/4 NPT 3/4 NPT

2X HYDRAULIC2XOUTLET
HYDRAULIC OUTLET
1" NPT PORT 1" NPT PORT
11.10 in [282 mm]
11.10 in [282 mm]
10.17 in [258 mm]
10.17 in [258 mm]

4.88 in [124 mm]

4.88 in [124 mm]
2X HYDRAULIC2XINLET
HYDRAULIC INLET
1 1/4" NPT PORT
1 1/4" NPT PORT

18.11 in [460 mm]

18.11 in [460 mm] 4.25 in [108 mm]
4.25 in [108 mm]
19.55 in [496 mm]
19.55 in [496 mm]
7.00 in [178 mm]
7.00 in [178 mm]
28.62 in [727 mm]
28.62 in [727 mm] 8.25 in [210 mm]
8.25 in [210 mm]

32.06 in [814 mm]

32.06 in [814 mm]

ModelModel
8SFD2-88
8SFD2-88

www.haskel.com
26 www.haskel.com
 HYDRAULIC
HYDRAULIC
HYDRAULIC
OUTLET
OUTLET
OUTLET HYDRAULIC
HYDRAULIC
HYDRAULIC OUTLETOUTLET
OUTLET
3/8
3/8HP
HP
3/8PORT
PORT
HP PORT 3/8 3/8PORT
3/8HP
HP HP PORT
PORT
(MAWP:
(MAWP:
(MAWP:
29,000
29,000
29,000
PSI)
PSI) PSI) (MAWP:
(MAWP:
(MAWP: 29,00029,000
29,000 PSI) PSI)
PSI)
HYDRAULIC OUTLET HYDRAULIC OUTLET
3/8 HP PORT 3/8 HP PORT
(MAWP: 29,000 PSI) (MAWP: 29,000 PSI)

HYDRAULIC
HYDRAULIC
HYDRAULIC INTLETINTLET
INTLET HYDRAULIC
HYDRAULIC
HYDRAULIC INLET
INLETINLET
1/2 1/2 PORT
1/2NPT
NPT NPT
PORTPORT 1/2 1/2 PORT
1/2NPT
NPT NPT
PORT PORT
(MAWP:
(MAWP:
(MAWP: 10,00010,000
10,000 PSI) PSI)
PSI) (MAWP:
(MAWP:
(MAWP: 10,00010,000
10,000 PSI) PSI)
PSI)
HYDRAULIC INTLET 88XX .85.X
533inin.[51[1333inmm[m1m]3] mm] HYDRAULIC INLET
1/2 NPT PORT (MOUNTING
(MOUNTING
(MOUNTING HOLES)
HOLES) HOLES) 1/2 NPT PORT 9.65
9.65in9.65
in[245inmm]
[245 [245
mm] mm]
(MAWP: 10,000 PSI) (MAWP: 10,000 PSI)
8X .53 in [13 mm]
(MOUNTING HOLES) 9.65 in [245 mm] AIR
AIRDRIVE
AIR DRIVE
DRIVE INLETINLET
INLET
3/4
3/4NPT
3/4 NPT
NPT
AIR DRIVE INLET
3/4 NPT

11.10
11.1011.10
inin[282inmm]
[282 [282
mm] mm]
10.1710.17
10.17 inin[258inmm]
[258 [258
mm] mm]
11.10 in [282 mm]
10.17 in [258 mm]

4.88
4.88in4.88
in[124inmm]
[124 [124
mm] mm]

4.88 in [124 mm]

18.11
18.1118.11
inin[460inmm]
[460 [460
mm] mm] 4.25
4.25in4.25
in[108inmm]
[108 [108
mm] mm]
18.11 in [460 mm] 4.25 in [108 mm]
19.55 inin[496
19.5519.55 inmm]
[496 mm] mm]
[496 7.00in7.00
7.00 in[178inmm]
[178 [178
mm] mm]
19.55 in [496
35.78
35.78 mm]
inin[909
35.78 inmm]
[909 mm] mm]
[909 7.00 in [178 mm]
35.78 in [909 mm]
8.25
8.25in8.25
in[210inmm]
[210 [210
mm] mm]
37.78
37.7837.78
inin[960inmm]
[960 [960
mm] mm] 8.25 in [210 mm]
37.78 in [960 mm]

Model
Model
Model8SFD2-224
8SFD2-224
8SFD2-224
Model 8SFD2-224

111
0001hh
h0p
pph(( p
7
(7
7 .. 4
4
(. 7
4
6.64
6 k6
k k
WW
W )k) W
)P
PuP
)um
u
m
Pmu
ppm
pM
MpM
oodo
ded
M e
ole
ldsl e
s sl s

Model
Model
Model
ModelD14STD-125
D14STD-125
D14STD-125
D14STD-125

Model D14STD-315
www.haskel.com 27
Model
Model
ModelD14STD-315
D14STD-315
D14STD-315
www.haskel.com
www.haskel.com
www.haskel.com
www.haskel.com
27
 For more information on our high-pressure products,
visit Haskel.com or contact your local Haskel representative.

is part of Ingersoll Rand. Ingersoll Rand (NYSE:IR) advances the quality of life by creating
comfortable, sustainable and efficient environments. Our people and our family of brands— including
Club Car®, Ingersoll Rand®, Thermo King® and Trane®—work together to enhance the quality and
comfort of air in homes and buildings; transport and protect food and perishables; and increase
industrial productivity and efficiency. We are committed to a world of sustainable progress and
enduring results.

haskel.com LP-GL 05/19

[email protected] Printed in USA