Scribd Logo
Upload

Welcome to Scribd!

  • 12 views

    Lf29 EN

    Uploaded by

    Bilal VURAL

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Lf29 EN

    Uploaded by

    Bilal VURAL
    12 views2 pages

    Original Title

    Lf29_EN

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    12 views2 pages

    Lf29 EN

    Uploaded by

    Bilal VURAL

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Compact cross table

    with linear motor drive


    High-precision positioning unit

    Main features:
    • Drive forces up to 264N for upper axis • One flat cable per axis for
    and 603N for lower axis all connections
    • Mechanical stroke up to 308mm • Optical measurement system
    • Speed up to 1,5m/s with integrated limit switches
    • Acceleration up to 30m/s2 • Precision cross roller rail guides
    • Ironless linear motor: with patented Anti cage Creeping
    no attraction forces, System (ACS)
    no cogging forces • Available in aluminum and cast iron
    • Moving magnets for easier cabling • Ideal suited for wafer processing
    (no moving cables to top part) and measurement applications

    Dynamical and electrical parameters

    Stroke mm (1) 92 164 236 308


    Motor Motor Moving mass AI (GG25)
    upper lower
    axis axis
    Fp Fn Ip In Up
    Kg (4) N (2) Aeff Vp (2)
    TLM300 .72 4,7 (11) 5,1 (11) 5,6 (12) 66 23 3,7 1,3 49
    .144 5,6 (12) 5,6 (12) 6,0 (12) 133 46 5,7 2,0 63
    .216 6,0 (12) 6,0 (12) 6,4 (13) 199 96 5,7 2,0 95
    .072 8,3 (20) 8,3 (20) 8,7 (20) 66 23 3,7 1,3 49
    .144 8,9 (20) 8,9 (20) 9,3 (21) 133 46 5,7 2,0 63
    .216 9,4 (21) 9,4 (21) 9,8 (21) 199 96 5,7 2,0 95

    TLM400 .144 10 (25) 11 (25) 11 (26) 133 46 5,7 2,0 63


    .216 11 (25) 11 (26) 12 (26) 199 69 5,7 2,0 95
    .288 11 (26) 12 (26) 12 (27) 264 92 5,7 2,0 126
    .144 15 (37) 16 (38) 16 (38) 307 65 7,6 2,6 101
    .216 16 (38) 16 (38) 17 (39) 460 97 11,4 3,9 100
    .288 17 (38) 17 (39) 17 (39) 603 124 11,5 4,0 127
    Note:
    1. The indicated value is the mechanical
    stroke. The electrical stroke = mechanical
    stroke – 2x10mm. The electrical stroke is
    set with optical limit switches, integrated
    in the length measurement system. The
    linear motors have reduced propulsion
    forces when operating between the end
    switches and the end stop.
    2. The displayed peak force, peak current
    and DC link voltage values should be
    multiplied by 1,2 to allow sufficient
    amplifier headroom. The displayed voltage
    U (DC link voltage) is valid for a speed of
    1m/s at a force Fp.
    3. GG25 is cast iron, to be used when
    maximum running accuracy and tempera-
    ture stability is required (see also table
    below). To get the real moving mass of the
    lower axis, the top axis value should be
    added to the lower axis value.
    4. The indicated value is the mechanical
    stroke. The electrical. Valid for the largest
    possible stroke, with the upper and lower
    axis both in centre position.
    5. Valid for 100mm stroke. For 200mm Position feedback and limit switches switches have a galvanic isolated PNP/NC
    stroke Tz +1 (1) and Ty +0,5 (0,25). The optical length measurement system (standard) or NPN/ NC output signal. The
    has standard a pitch of 20µm and an limit switch supply voltage is 10 - 30V DC.
    output signal of 1Vpp. A TTL output signal The limit switch position, as well as the
    with a resolution up to 0,1µm is available measurement system status are indicated
    upon request. The standard accuracy class on the system by 3 LEDs per axis.
    is 3µm. The integrated optical limit

    Mechanical parameters

    Model Weight bottom Stage Min. outer Max. outer Through hole Height Height/ Side Perpen-
    part Al (GG25) dimensions dimensions dimensions dimensions accuracy dicularity
    Al (GG25)
    B1 x B2 D1 x D2 H Tz / Ty
    Kg mm (5) µm(6) mrad
    TLM300 6 (16) 300 x 300 338 x 357 432 x 432 208 x 208 109 6 / 5 (5 / 4) 0,03
    TLM400 13 (34) 400 x 401 438 x 468 576 x 576 275 x 255 145 6 / 5 (5 / 4) 0,03

    SKF Linearsysteme GmbH ® SKF is a registered trademark of the SKF Group.


    DE-97424 Schweinfurt, Germany
    E-mail [email protected] © SKF 2005
    The contents of this publication are the copyright of the publisher and may not be reproduced
    (even extracts) unless prior written permission is granted. Every care has been taken to ensure
    the accuracy of the information contained in this publication but no liability can be accepted for
    any loss or damage whether direct, indirect or consequential arising out of the use of the
    Publication Lf29EN 2/0505 information contained herein.

    You might also like