Baseline Survey Technical Textiles Sector 20042022

Technical Textiles
Industry in India
OPPORTUNITIES AND CHALLENGES
Baseline Study
2020
Submitted by
Submitted to
Ministry of Textiles, Government of India
Technical Textiles
Industry in India
OPPORTUNITIES AND CHALLENGES
Baseline Study 2020
submitted to
Ministry of Textiles, Government of India
Acknowledgement
The completion of this report has been possible due to the motivation and support of several people and
institutions. At the outset, we would like to express our profound gratitude to the Ministry of Textiles,
Government of India and Mr. Nihar Ranjan Dash, Joint Secretary, Ministry of Textiles, for giving the research
team the opportunity and the financial impetus to conduct a study of this magnitude. We would also like to
express our deep sense of gratitude to Prof. V. Ramgopal Rao, Director, IIT Delhi, for guiding us and
providing us the opportunity and facilities for conducting this project work. We also extend our sincere thanks
to the Industrial Research & Development (IRD) Unit, IIT Delhi for providing continuous administrative and
managerial support throughout the span of the project.
The study involved engagement with all relevant stakeholders related to technical textile industry in India. We
take this opportunity to extend our heartfelt thanks to all the stakeholders who participated in our study and
shared their invaluable time and inputs with us including the primary survey participants, business leaders of
top 10 (case study) firms, workshop participants, Textile Research Associations, Centres of Excellence, Bureau
of Indian Standards, Academic Institutions, Apex Industry Associations, other Manufacturers Associations,
Focus Incubation Centres and Technology Parks. Gathering the on-ground data and information would not
have been possible without their active support and cooperation, especially during the unprecedented and
difficult times of COVID-19 when these activities were undertaken.
We would also like to express our thanks to all the project staff, research scholars, students, and other
support staff for their help in implementing the project. The collecting, monitoring, and synthesising the
gargantuan data, and collating the information generated in this study into meaningful and relevant output in
alignment with the objectives, would not have been possible without their continuous and active support.
Photo Credits
- Arvind Limited - Mewar Polytex Ltd
- Ahmedabad Textile Industry’s Research Association - Nobletex industries Ltd
(ATIRA) - Q-Rex Flex Pvt Ltd
- CTM Agrotex - SRF Limited
- DKTE Textile and Engineering Institute - Strata Geosystems (India) Private Ltd
- Forech India - Suntech geotextile Pvt Ltd
- Garware Technical Fibres Ltd - Surya Textech
- IIT Delhi - Tarasafe International Pvt Ltd
- Jeevan Nonwoven - Tata Advanced Systems Ltd
- Khosla Profil Pvt Ltd - Techfab (India) Industries Ltd
- Kob medical textiles Pvt Ltd - Texport Industries Pvt Ltd
- Kusumgar Corporates Pvt Ltd - Welspun India Ltd
CONTENT INDEX
Section 1 Pg. No.

Abbreviations
Executive Summary i - xviii
Section 2 Background and Context to the Study Pg. No.

2.1 Objectives of the Study 1
2.1.1 Technical Textile Market Analysis 1
2.1.2 Resource Availability 3
2.1.3 Future of Technical Textiles 3
2.1.4 Impediments to growth of India’s technical textiles industry 3
2.1.5 Recommendations 4
2.1.6 Comprehensive information about industry’s stakeholders 4
2.2 Data and Methodology 5
2.2.1 Data collection and management 5
2.2.2 Methods used for analysing the data 7
2.2.3 Workflow 7
2.2.4 Limitations of the study 8
Section 3 Introduction to Technical Textiles in India Pg. No.

3.1 Definition of Technical Textiles 9
3.2 Segments of Technical Textiles 9
3.3 Indian Technical Textiles Industry 10
3.4 Industry’s response to Coronavirus pandemic 11
Section 4 Exhaustive List of Technical Textile Products Pg. No.

4.1 Agrotech Products 13
4.2 Buildtech Products 14
4.3 Clothtech Products 15
4.4 Geotech Products 16
4.5 Hometech Products 16
4.6 Indutech Products 18
4.7 Meditech Products 19
4.8 Mobiltech Products 21
4.9 Oekotech Products 23
4.10 Packtech Products 23
4.11 Protech Products 24
4.12 Sportech Products 26
4.13 Smart Textiles Products 27
Section 5 Institutional Consumers of Technical Textiles in India Pg. No.

5.1 Demand side interventions by the Government 29
5.1.1 Agrotech 29
5.1.2 Buildtech 30
5.1.3 Clothtech 30
5.1.4 Geotech 30
5.1.5 Hometech 31
5.1.6 Indutech 31
5.1.7 Meditech 32
5.1.8 Mobiltech 32
5.1.9 Oekotech 32
5.1.10 Packtech 32
5.1.11 Protech 33
5.1.12 Sportech 34
5.2 Technical textile products procured by Government organisations & PSUs 34
Section 6 Investments in Technical Textile Industry of India Pg. No.

6.1 Foreign Direct Investment (FDI) 39
6.1.1 Current scenario of FDI in textile industry 40
6.1.2 Recent Foreign Direct Investments in technical textiles industry 40
6.2 Major investments by Indian firms in recent past 41
6.3 Initiatives taken by the Government of India 43
Section 7 Employment potential of Technical Textiles in India Pg. No.
7.1 Employment scenario in technical textiles 44

7.2 Employment outlook in technical textiles 45
7.3 Educational qualifications and skills required for jobs in technical textiles 47
7.4 Frequent recruiters in technical textiles 49
7.5 Major concerns related to employment in technical textiles 50
Section 8 Major Firms of Indian Technical Textile Industry Pg. No.

8.1 Arvind Limited 51
8.1.1 Company snapshot 51
8.1.2 Operating business segments 52
8.1.3 Technical Textiles product portfolio 52
8.1.4 Sources of revenue share (2020) 53
8.1.5 Revenue share by segment (2020) 53
8.1.6 Business performance of technical textiles in last three years (Rs. 53
Crores)
8.1.7 Key strategic moves and developments related to Technical 53
Textiles
8.1.8 Company overview 54
8.1.9 Contact information 54
8.2 BMD Private Limited 54
Crores)
Textiles
8.3 Garware Technical Fibres Limited 57
Crores)
Textiles
8.4 Kusumgar Corporates Private Limited 60
8.4.2 Operating Business Segments 60
Crores)
Textiles
8.5 SRF Limited 63
8.5.2 Operating Business segments 63
Crores)
Textiles
8.6 Strata Geosystems (India) Private Limited 65
8.6.6 Business performance in last three years (Rs. Crores) 66
8.6.7 Key strategic moves and developments by company/group related 66
to Technical Textiles
8.7 Supreme Nonwoven Industries Private Limited 67
8.7.6 Business performance in last three years (Rs. Crore) 68
Textiles
8.8 Tata Advanced Systems Limited 69
Textiles
8.9 Techfab(India) Industries Limited 72
Textiles
8.10 Welspun India Limited 75
8.10.6 Business performance in last three years for overall textiles (Rs. 76
Crores)
Textiles
Section 9 Domestic & Global Markets of Technical Textiles Pg. No.
9.1 Background 78
9.2 Agrotech 82
9.2.1 Anti-Hail and Anti-Bird Nets 84
9.2.2 Crop Covers 85
9.2.3 Fishing Nets 85
9.2.4 Mulch Mats 86
9.2.5 Shade Nets 86
9.3 Buildtech 87
9.3.1 Acoustic Fabric 89
9.3.2 Architectural Membranes 89
9.3.3 Awnings and Canopies 90
9.3.4 Canvas Tarpaulin 91
9.3.5 HDPE Tarpaulin 91
9.3.6 Hoardings and Signages 91
9.3.7 Scaffolding Nets 92
9.4 Clothtech 93
9.4.1 Elastic Narrow Tape 95
9.4.2 Hook and Loop Fasteners 96
9.4.3 Interlining 96
9.4.4 Labels and Badges 97
9.4.5 Laces and Tapes (Treated/Coated) 97
9.4.6 Specialised and Industrial Sewing Thread 97
9.4.7 Umbrella Cloth (TT component) 98
9.4.8 Zip Fastener Tape (TT component) 98
9.5 Geotech 99
9.5.1 Geotextiles 101
9.5.2 Geomembranes 102
9.5.3 Geonets, Geogrids and Geostrips 103
9.5.4 Geocomposites 104
9.5.5 Geotextile Tubes 104
9.5.6 Geomats 105
9.5.7 Geocells 106
9.5.8 Geofoams 106
9.5.9 Geocombs 106
9.5.10 Geopipes 106
9.6 Hometech 107
9.6.1 Blinds 109
9.6.2 Carpet Backing Cloth (CBC) 109
9.6.3 Fibre Fill (Polyester Staple Fibre) 110
9.6.4 Filter Fabrics (HVAC and Vacuum Cleaners) 110
9.6.5 Furniture Fabrics & Other Coated Fabrics 111
9.6.6 Mosquito Nets 111
9.6.7 Non-Woven Household Wipes 112
9.6.8 Stuffed Toys (Plush Fabric) 112
9.6.9 Others 113
9.6.9.1 Ticking Fabric 113
9.7 Indutech 113
9.7.1 AGM Glass Battery Separators 116
9.7.2 Bolting Cloth 117
9.7.3 Conveyor Belts 117
9.7.4 Decatising Cloth 118
9.7.5 Drive Belts 118
9.7.6 Industrial Filtration Products 118
9.7.7 Industrial Webbing and Slings 119
9.7.8 Paper Making Fabric 119
9.7.9 Printed Circuit Boards (TT component) 120
9.7.10 Ropes and Cordages 120
9.7.11 Coated Abrasives 121
9.7.12 Computer Ribbon 121
9.7.13 Cigarette Filter Rods 122
9.7.14 Glass Fabric (as part of composites- TT part) 122
9.8 Meditech 123
9.8.1 Baby Diapers 126
9.8.2 Compression Garments 127
9.8.3 Cotton Buds 127
9.8.4 Extra Corporeal Devices and Artificial Kidney (Dialyser) 129
9.8.5 Incontinence Diapers 129
9.8.6 Orthopaedic Implants (including artificial tendon, artificial joints, 130
artificial ligaments and prosthetics)
9.8.7 Sanitary Napkins 130
9.8.8 Surgical Disposables (Medical/Surgical Apparel/Protective Clothing) 131
9.8.9 Vascular Graft 132
9.8.10 Medical Wipes (Antibacterial/Antimicrobial/Disinfectant Wipes) 132
9.8.11 Dental Floss 133
9.8.12 Hernia Mesh 133
9.8.13 Disposable Bedsheets, Curtains and Pillow Covers 134
9.8.14 Heart and Soft Tissue Repair Patch 135
9.8.15 Surgical Sutures 135
9.8.16 Heart Valve 136
9.8.17 Underpads 136
9.8.18 Surgical Dressings 136
9.8.19 Eyepads (TT component) 137
9.8.20 Compression Stockings 137
9.9 Mobiltech 138
9.9.1 Airbags (TT component) 140
9.9.2 Automotive Interior Carpets 141
9.9.3 Car Body Covers 141
9.9.4 Headliners (TT component) 142
9.9.5 Helmets (TT component) 142
9.9.6 Insulation Felts (TT component) 143
9.9.7 Seat Belt Webbing 143
9.9.8 Seat Cover Fabrics 144
9.9.9 Sun Visors/Sun Blinds 144
9.9.10 TT Usage in Airlines (Upholstery and Airline Disposables) 144
9.9.11 TT Usage in Railways 145
9.9.12 Tyre Cord Fabric 145
9.10 Packtech 145
9.10.1 FIBC (Jumbo Bags) 148
9.10.2 Jute, Hessian and Other Sacks 148
9.10.3 Leno Bags 149
9.10.4 Polyolefin Woven Sacks 150
9.10.5 Soft Luggage 150
9.10.6 Tea Bag Filter Paper 151
9.10.7 Treated/Coated Wrapping Fabric 151
9.10.8 Shopping Bags (Spun Bond, Non-Woven) 151
9.11 Protech 152
9.11.1 Bullet Proof Jackets 154
9.11.2 Fire Retardant Apparel 155
9.11.3 Fire Retardant Fabrics for Furnishings 155
9.11.4 High Altitude Clothing 156
9.11.5 High Visibility Clothing 156
9.11.6 Industrial Gloves 157
9.11.7 Nuclear & Biological Protective Clothing 157
9.11.8 Chemical Protective Clothing 157
9.11.9 Others (including Outer Protective Clothing) 158
9.12 Sportech 158
9.12.1 Artificial Turf 161
9.12.2 High Performance Sportswear and Swimwear 161
9.12.3 Parachute Fabrics 162
9.12.4 Sleeping Bags 162
9.12.5 Sports Composites (TT component) 163
9.12.6 Sports Footwear Components 163
9.12.7 Tents 163
9.12.8 Ballooning Fabrics 164
9.12.9 Sports Nets 164
9.12.10 Sports Strings 165
Section 10 Leading Countries in Technical Textiles: A Comparison Pg. No.
10.1 Identification of leading countries in technical textiles 166

10.2 Output and CAGR of Technical Textiles 166
10.3 Exports of Technical Textiles 167
10.4 Technical textiles: Its share and major products 167
10.5 Large enterprises producing technical textiles 167
10.6 Premier academic institutions for technical textiles 168
10.7 Prominent R&D facilities/institutions for technical textiles 168
10.8 Major initiatives taken by Governments of leading countries for supporting 168
technical textiles industry
10.8.1 China 168
10.8.2 USA 169
10.8.3 Germany 169
10.8.4 India 169
10.9 Data sources 169
Section 11 Future demand and trade expectations in Technical Textiles Pg. No.
11.1 Introduction to supply sources and demand destinations for technical textiles 170
11.2 Demand and trade characteristics of Indian technical textiles 171
11.3 Segment-wise features of demand and trade of technical textiles in India 171
Section 12 Attractiveness of Different States for Technical Textile Pg. No.
Manufacturers
12.1 Need for comparing attractiveness of states 177
12.2 Method followed for comparing attractiveness of states 177
12.3 Findings regarding attractiveness of states 189
12.4 Inferences and conclusions regarding attractiveness of states 192
Section 13 Analysis of Technical Textiles Trade of India Pg. No.

13.1 Overview 193
13.2 Balance of Trade 193
13.3 Segment-wise analysis of Exports and Imports in India 194
13.3.1 Export distribution across segments and countries 195
13.3.2 Distribution of Imports across segments and countries 196
13.3.3 Conclusion 197
13.4 Segment-wise analysis of Exports and Imports of Technical Textiles products in 197
India
13.4.1 Agrotech 197
13.4.1.1 Overview 198
13.4.1.2 Balance of Trade 198
13.4.1.3 Export distribution across items and countries 198
13.4.1.4 Import distribution across items and countries 199
13.4.2 Buildtech 200
13.4.2.1 Overview 201
13.4.3 Clothtech 203
13.4.3.1 Overview 204
13.4.4 Geotech 206
13.4.4.1 Overview 207
13.4.5 Hometech 209
13.4.5.1 Overview 209
13.4.6 Indutech 211
13.4.6.1 Overview 212
13.4.7 Meditech 214
13.4.7.1 Overview 215
13.4.8 Mobiltech 217
13.4.8.1 Overview 218
13.4.9 Packtech 221
13.4.9.1 Overview 221
13.4.10 Protech 224
13.4.10.1 Overview 225
13.4.11 Sportech 227
13.4.11.1 Overview 228
13.5 Summary of International Trade of India’s technical textiles industry 230
13.6 Identification of 449 HSN codes for Technical Textiles trade in India 232
13.6.1 Harmonized System of Nomenclature (HSN) 232
13.6.2 HSN codes for technical textile products 233
13.6.3 Methodology used for revising HSN codes of technical textiles 233
13.6.3.1 Collection of ITC-HS codes 233
13.6.3.2 Rationalisation and revision of list of codes 234
Section 14 International Trade of Technical Textiles & India’s contribution Pg. No.
14.1 Export Data 235

14.2 Major Exporting Countries 238
Section 15 National and State Policies and Schemes Pg. No.
15.1 Introduction 242

15.2 National level policies and schemes 242
15.3 Details of the national policies and schemes 244
15.3.1 Technology Upgradation Fund Scheme (TUFS) 244
15.3.2 Scheme for Integrated Textile Parks (SITP) 247
15.3.3 Scheme for Growth and Development of Technical Textiles (SGDTT) 247
15.3.4 Technology Mission for Technical Textiles (TMTT) 248
15.3.5 Scheme for promoting usage of Agrotextiles in Northeast Region 250
15.3.6 Scheme for promoting the usage of Geotechnical textiles in the 251
North East Region
15.3.7 Launch of ITC Harmonized System of Nomenclature Code (HSN 251
Code)
15.3.8 Focus Product Incentive Scheme (FPIS) 252
15.3.9 National Technical Textiles Mission 252
15.3.10 Concessional custom duty for specific technical textiles machinery 254
15.3.11 Mandatory use of Technical Textiles 254
15.3.12 Standardisation of technical textiles 254
15.3.13 Samarth (Scheme for Capacity Building in Textile Sector) 254
15.4 State level policies and schemes 255
15.4.1 Andhra Pradesh ‘Revised Policy for Textiles and Apparel 2018-23’ 255
15.4.2 Bihar Industrial Investment Promotion Policy, 2016 for High Priority 256
Sectors
15.4.3 Gujarat State Scheme for Assistance to Strengthen Specific Sectors 256
in the Textile Value Chain (2018-23) [Extension to Gujarat Textile
Policy, 2012]
15.4.4 Haryana Textile Policy 2019 258
15.4.5 J&K Start-up Policy 2018 259
15.4.6 Jharkhand Textile, Apparel and Footwear Policy 2016 259
15.4.7 Karnataka Textile and Garment Policy 2019-2024 261
15.4.8 Kerala Industrial & Commercial Policy 2018 263
15.4.9 Madhya Pradesh Industrial Promotion Policy 2014 264
15.4.10 Maharashtra Textile Policy 2018-23 265
15.4.11 Odisha Industrial Policy Resolution 2015 266
15.4.12 Punjab Industrial and Business Development Policy 2017 268
15.4.13 Rajasthan Special Customised Package for Textile Sector 269
enterprises-2013
15.4.14 Rajasthan Investment Promotion Scheme 2019 269
15.4.15 Tamilnadu Integrated Textile Policy 2019 270
15.4.16 Telangana Textile and Apparel Incentive Scheme 2017 271
15.4.17 Uttar Pradesh Handloom, Powerloom, Silk, Textile & Garmenting 273
Policy 2017
15.4.18 Uttarakhand Mega Textile Policy 2014 273
15.4.19 West Bengal Textile Policy 2013-2018 274
International Trade of Technical Textiles and India’s contribution
Section 16 Formulation of Indian Standards for Technical Textiles Pg. No.
16.1 Process of development of standards at BIS 277

16.2 New Standards under development on Technical Textiles 279
Section 17 Status and Contribution of Textile Research Associations Pg. No.

17.1 Methodology 281
17.2 Establishment of TRAs 281
17.3 Research 282
17.3.1 Funded and sponsored projects 282
17.3.2 In-house projects 283
17.3.3 Duration of projects 284
17.4 Knowledge Dissemination 285
17.5 Consultancy projects 285
17.6 Training Programmes and Workshops 286
17.7 Publications by TRAs 286
17.8 Revenue generated by TRAs 286
17.9 Patent Information 287
17.10 Machines and Equipment 288
17.11 Emerging products and segments in technical textiles 288
17.12 Challenges faced by TRAs 289
17.12.1 Lack of infrastructure 289
17.12.2 Lack of standardisation and related regulations 289
17.12.3 Lack of skilled manpower 289
17.12.4 Lack of funding in research and development 290
17.12.5 Poor level of awareness about technical textile products among 290
end users in India
17.13 Suggestions offered by TRAs 290
Section 18 Status and Contribution of Centres of Excellence in India Pg. No.

18.2 Centres of Excellence 293
18.2.1 Details of the COEs 293
18.2.2 Location 294
18.3 Findings from the Primary Survey of COEs 295
18.3.1 Revenues generated by COEs in the last six years (2015-2020) 295
18.3.2 Standards used for testing technical textiles across various 296
segments of COEs
18.3.3 Publications by COEs (2015-2020) 297
18.3.4 Academic projects undertaken by COEs (2015-2020) 298
18.4 Challenges and Suggestions of COEs 299
18.4.1 Skilled Scientific Workforce 299
18.4.2 Consumer Awareness 300
18.4.3 Financial Resources for Research 300
18.4.4 Specifications and Standards 300
18.4.5 International Collaborations 300
Section 19 Practices of Indian COEs and COEs in other countries: A comparison Pg. No.
19.1 Identification of Premier Centres of Excellence (COEs) 301

19.2 Basic information about premier international Centres of Excellence 301
19.3 Projects and collaborations of premier COEs 303
19.4 Manufacturing and testing facilities at premier COEs 304
19.5 Knowledge dissemination by premier COEs 305
19.6 Comparative analysis of premier international COEs and Indian COEs 307
Section 20 Technical Textiles Education in India Pg. No.

20.2 Findings from the Primary Survey of Academic Institutions in India 308
20.2.1 Faculty strength and its break-up 310
20.2.2 Faculty resources 310
20.2.3 Library resources 311
20.2.4 Funded/Sponsored Projects (2015-2020) 311
20.2.5 Machines and equipment worth more than Rs. 5 Lakhs each, 315
installed in last three years (2017-2020)
20.2.6 Placement of Students 316
20.2.7 Patents Granted 316
20.2.8 Number of publications (2015-2020) 317
20.2.9 Start-ups in technical textiles supported by Academic 317
Institutions/University Departments
20.2.10 Skill gaps in technical textiles education in India 318
20.2.11 Technology gaps in textile education in India 320
20.2.12 Emerging areas identified by academic institutions 322
20.2.13 Challenges faced by the academic institutions and universities in 323
imparting education related to technical textiles
20.2.14 New programmes and courses related to technical textiles that 324
academic institutions and universities must offer in the coming
future
20.2.15 Suggestions to strengthen technical textiles education 326
20.2.16 Support from TRAs 328
20.3 Best Practises of Premier International Universities 329
20.3.1 Design of Courses 330
20.3.2 Research projects by students 331
20.3.3 Industry-Academia collaboration 331
20.3.4 Establishment and effective working of innovation centres 332
20.3.5 Scholarships 333
20.3.6 Exchange programmes 333
20.3.7 Quality assurance from external sources 333
20.3.8 Student to faculty ratio 334
20.4 Summary of main findings 334
20.4.1 Findings related to Skill Gaps 335
20.4.2 Methods suggested to address the skill gaps 335
20.4.3 Curriculum related steps suggested 335
Section 21 Status and Contribution of Focus Incubation Centres Pg. No.
21.1 Background 336

21.2 From Incubation Centres to Focus Incubation Centres for Technical Textiles 337
21.3 Progress of the Focus Incubation Centres 338
21.4 Challenges faced by the FICs 341
Section 22 Status and Contribution of Integrated Textile Parks Pg. No.

22.1 The concept of Integrated Technology Parks 343
22.2 Scheme for Integrated Textile Parks in India 343
22.2.1 Status of technical textiles focused technology parks in India 344
22.2.2 Inferences about technical textile parks 345
Section 23 Technical Textiles Product Manufacturing Firms: Findings from Pg. No.
Primary Survey
23.1 Technical Textiles Product Manufacturing Firms 347
23.2 Type of firms based on Ownership Structure 348
23.3 Segment wise distribution of firms and their roles 349
23.4 Technical textile products manufactured by respondent firms 350
23.5 Production of technical textile products by Indian manufacturers 353
23.6 Segment-wise analysis of sales revenue and production 355
23.6.1 Agrotech 355
23.6.2 Buildtech 355
23.6.3 Clothtech 356
23.6.4 Geotech 357
23.6.5 Hometech 358
23.6.6 Indutech 358
23.6.7 Meditech 359
23.6.8 Mobiltech 360
23.6.9 Packtech 360
23.6.10 Protech 361
23.6.11 Sportech 362
23.7 User industries of technical textile products 363
23.8 Raw materials (RM) used in the production of technical textile products 363
23.8.1 Segment-wise consumption of various raw materials 364
23.8.2 Purchase of raw materials by Indian firms 365
23.8.3 Import of raw materials by Indian technical textile product 366
manufacturing firms
23.9 Manufacturing processes used by technical textile product manufacturing 369
firms
23.9.1 Segment-wise distribution of manufacturing processes 371
23.9.2 Procurement of machines by Indian technical textile manufacturing 373
firms
23.9.3 Import of machines from outside India 374
23.10 Export of products by Indian technical textile product manufacturers 376
23.11 Foreign Investments in technical textiles 379
23.12 Manpower and Employment 379
23.13 Employee training programmes 380
23.14 Other technical textile segments of interest 382
23.15 Porter’s five force analysis of technical textile product industry in India 385
23.16 Problems faced and suggestions offered by technical textiles manufacturing 389
firms
Section 24 Fibre, Filament and Technical Yarn Manufacturing Firms: Findings Pg. No.
from Primary Survey
24.1 Types and forms of fibres, filaments and technical yarns produced by Indian 391
raw material manufacturing firms
24.2 Segment-wise supply of fibre, filament, and technical yarns by raw material 392
manufacturers in India
24.3 Production of fibre, filament, and technical yarn manufacturers 393
24.4 Consumers of fibre, filament and technical yarns in the technical textile 394
sector in India
24.5 Import of raw materials from outside India to produce fibre, filament or 394
technical yarn
24.6 Manpower engaged in raw material manufacturing 395
24.7 Emerging segments and products in the technical textile industry 395
24.8 Technical collaborations undertaken by fibre, filament, and technical yarn 395
manufacturing firms in India
24.9 Technological gaps faced by the raw material manufacturers 395
24.10 Suggestions to promote domestic manufacturing of raw materials in India 396
Section 25 Technical Textile Machine Manufacturing Firms: Findings from Pg. No.
Primary Survey
25.1 Functions performed by technical textile machine manufacturing firms 397
25.2 Types of machines manufactured/ assembled/ imported/ marketed by the 397
firms
25.3 Supply of machines to various segments of technical textile industry in India 398
25.4 Import of Machines 399
25.5 Measures suggested to promote machine manufacturers for technical textile 399
industry
Section 26 Contribution of Manufacturers’ Associations Pg. No.

26.1 Association of Synthetic Fibre Industry 401
26.1.1 Nylon 66 402
26.1.2 Nylon 6 (High tenacity/Non-Apparel Application) 402
26.1.3 Polyester Industrial Filament 403
26.1.4 Aramid 403
26.1.5 UHMWPE: Ultra High Molecular Weight Polypropylene 403
26.1.6 Carbon Fibre 403
26.2 FRP (Fibreglass Reinforced Plastics) Institute 404
26.2.1 Indian Composites market 404
26.2.2 Application of Composites in various sectors 405
26.2.3 Major technology gaps 406
26.2.4 Cultivating the innovation culture in India 406
26.3 Indian Textile Accessories and Machinery Manufacturers Association 407
(ITAMMA)
26.3.1 Types of Technical Textile Machines/Spares in India 407
26.3.2 Challenges faced and suggestions by Technical Textile 408
machines/spares manufacturers of India
26.4 Textile Machinery Manufacturers Association (TMMA) India 409
26.4.1 Different types of textile machines which can be produced in India 409
26.4.2 Challenges faced by technical textile machine manufacturers in 410
India
Section 27 Stakeholders’ Workshops Pg. No.

27.1 Resource availability for Technical Textiles 411
27.1.1 TRAs, COEs and Academic Institutions 411
27.1.2 Apex Industry Associations and Institutions 412
27.1.3 Protech 412
27.1.4 Meditech 412
27.1.5 Clothtech, Hometech and Sportech 413
27.1.6 Agrotech, Geotech and Oekotech 414
27.1.7 Buildtech, Indutech, Mobiltech and Packtech 414
27.2 Markets and Marketing of Technical Textiles 415
27.2.3 Protech 416
27.2.4 Meditech 416
27.3 Future developments expected in Technical Textiles 418
27.3.3 Protech 419
27.3.4 Meditech 419
27.4 Impediments to growth for Technical Textiles in India 422
27.4.3 Protech 422
27.4.4 Meditech 423
27.5 Factors Affecting Technical Textiles Industry: Expert Opinion 425
27.5.1 Introduction to factor analysis of responses from workshop 425
participants
27.5.2 Methodology of factor analysis of responses 425
27.5.3 Results of factor analysis of responses 426
27.6 Suggestions proposed by participants of the workshops 429
27.6.1 Suggestions by TRAs, COEs and Academic Institutions 429
27.6.2 Suggestions by Apex Industry Associations and Institutions 430
27.6.3 Suggestions by representatives of Protech segment 430
27.6.4 Suggestions by representatives of Meditech segment 431
27.6.5 Suggestions by representatives of Clothtech, Hometech and 431
Sportech segments
27.6.6 Suggestions by representatives of Agrotech, Geotech and Oekotech 432
segments
27.6.7 Suggestions by representatives of Buildtech, Indutech, Mobiltech 434
and Packtech segments
Section 28 Emerging Technologies and Technology Trends in Technical Textiles Pg. No.
28.1 Emerging Technologies in Technical Textiles 435
28.1.1 Smart textiles 435
28.1.2 Phase change textile materials 436
28.1.3 Smart textiles with sensors 436
28.1.4 Smart mask 437
28.1.5 Textile with controlled drug release 437
28.2 Technological trends in energy harvesting smart-textiles 438
28.2.1 Triboelectric nanogenerators 438
28.2.2 Piezoelectric textiles for energy harvesting 439
28.3 Nonwoven Manufacturing 440
28.3.1 HydroSpace technology 440
28.3.2 Wetlace nonwoven process 441
28.3.3 Hyper-punching nonwoven 441
28.3.4 Phantom nonwoven technology 442
28.3.5 Electro-spun nonwovens 442
28.4 Technologies for the production of 3D nonwoven structures 443
28.4.1 Vertical lapping system 443
28.4.2 3D Web Linker technology 444
28.4.3 Stitch bonding (Maliwatt, Malivies, Kunit, Multinit) 445
28.5 Textile preforms for composites 446
28.5.1 Single layer quasi-isotropic fabric 447
28.5.2 Near-net shape preform by unidirectional fibre 447
28.5.3 Radial braiding technique for 3D preform 448
28.5.4 3D Knitting Technology 449
28.5.5 3D-Crimpless preform by Noobing 450
28.5.6 WEAV3D process for thermoplastic prepeg consolidation 450
28.5.7 3D-woven preforms by Jacquard weaving 451
28.6 Material and Technology Trends in Technical Textile Products 452
Section 29 Recommendations to overcome impediments to growth of Indian Pg. No.

Technical Textile industry
29.1 The case for making recommendations 461
29.2 Impediments to growth of technical textiles industry in India 461
29.3 General recommendations to promote growth of technical textiles industry in 464
India
29.3.1 Short-Term Recommendations 464
29.3.2 Medium-Term Recommendations 466
29.3.3 Long-Term Recommendations 467
29.4 Specific recommendations to promote growth of technical textiles industry in 470
India
29.4.1 Technological necessities 470
29.4.2 Business necessities 470
29.4.3 Necessity of Standards 471
29.4.4 Necessity of Research, Education and Skill development 471
29.4.5 Necessity of Textile Research Associations (TRAs) and Centres of 472
Excellence (COEs)
ANNEXURES Pg. No.
Annexure 1 List of 207 HSN Codes notified by the Ministry of Textiles and proposed 474
classification by IIT Delhi
Annexure 2 List of additional 242 ITC HS Codes proposed by IIT Delhi for inclusion as 481
codes for Technical Textile items
Annexure 3 List of standards developed by BIS in Agrotech 489
Annexure 4 List of standards developed by BIS in Buildtech 490
Annexure 5 List of standards developed by BIS in Clothtech 491
Annexure 6 List of standards developed by BIS in Geotech 492
Annexure 7 List of standards developed by BIS in Indutech 495
Annexure 8 List of standards developed by BIS in Meditech 497
Annexure 9 List of standards developed by BIS in Mobiltech 499
Annexure 10 List of standards developed by BIS in Packtech 500
Annexure 11 List of standards developed by BIS in Protech 501
Annexure 12 List of standards developed by BIS in Sportech 503
Annexure 13 List of standards developed by BIS in Composites and Specialty Fibres 504
Annexure 14 List of standards developed by BIS in Ropes and Cordages 505
Annexure 15 Directory of Textile Research Associations in India 507
Annexure 16 Important funded / sponsored projects undertaken by TRAs (2015-2020) 509
Annexure 17 Important In-house projects undertaken by TRAs (2015-2020) 511
Annexure 18 Important consultancy projects undertaken by TRAs (2015-2020) 512
Annexure 19 List of some important training programmes/workshops organised by TRAs 513
(2015-2020)
Annexure 20 List of some international and national conferences, seminars and 515
symposiums organised by TRAs (2015-2020)
Annexure 21 Some technology transfers related to technical textiles by TRAs (2015-2020) 517
Annexure 22 Important Instruments/ Machines/ Technology developed by TRAs (2015- 518
2020)
Annexure 23 Technical Textile related machines and equipment installed by TRAs (2015- 519
2020)
Annexure 24 Directory of Centres of Excellence for Technical Textiles in India 521
Annexure 25 Technical textiles testing facilities provided by COEs 523
Annexure 26 Companies using product development facilities and testing facilities of the 533
COEs
Annexure 27 Key instruments and product development facilities at COEs 537
Annexure 28 Directory of Academic Institutions offering Undergraduate and Postgraduate 542
education in Textile Engineering and Technology
Annexure 29 Directory of Institutes offering textile relevant Diploma Courses 546
Annexure 30 Directory of Focus Incubation Centres for Technical Textiles 549
Annexure 31 Directory of Technology Parks for Technical Textiles 550
Annexure 32 List of enterprises that participated in the survey conducted by IIT Delhi 551
Annexure 33 Directory of important Manufacturers’ Associations 557
Annexure 34 Participants of the Technical Textiles Stakeholders’ Workshops organised by 558
IIT Delhi (October-December 2020)
Annexure 35 Citations for Section 28 (Emerging Technologies and technology trends in 562
technical textiles)
Annexure 36 Profiles of key Technical Textile firms in India 565
List of Figures and Tables
FIGURES
Section 2: Background and context to the study
Figure 2.1: Process for primary data collection _______________________________________________ 7
Figure 2.2: Process for secondary data collection _____________________________________________ 8
Section 9: Domestic and Global markets of Technical Textiles

Figure 9.1: Percentage contribution of Agrotech products in the domestic market (2019-20) ___________ 83
Figure 9.2: Percentage contribution of Agrotech products in the international market (2019-20) ________ 83
Figure 9.3: Production vs consumption of Agrotech segment in the domestic market (Rs Crores) _______ 84
Figure 9.4: Percentage contribution of Buildtech products in the domestic market (2019-20) __________ 87
Figure 9.5: Percentage contribution of Buildtech products in the international market (2019-20)________ 88
Figure 9.6: Production vs consumption of Buildtech segment in the domestic market (Rs Crores) _______ 88
Figure 9.7: Percentage contribution of Clothtech products in the domestic market (2019-20) __________ 93
Figure 9.8: Percentage contribution of Clothtech products in the international market (2019-20) _______ 94
Figure 9.9: Production vs consumption of Clothtech segment in the domestic market (Rs Crores) _______ 94
Figure 9.10: Percentage contribution of Geotech products in the domestic market (2019-20) ___________ 100
Figure 9.11: Percentage contribution of Geotech products in the international market (2019-20) ________ 100
Figure 9.12: Production vs consumption of Geotech segment in the domestic market (Rs Crores) ________ 101
Figure 9.13: Percentage contribution of Hometech products in the domestic market (2019-20) __________ 107
Figure 9.14: Percentage contribution of Hometech products in the international market (2019-20) _______ 108
Figure 9.15: Production vs consumption of Hometech segment in the domestic market (Rs Crores) ______ 108
Figure 9.16: Percentage contribution of Indutech products in the domestic market (2019-20) ___________ 114
Figure 9.17: Percentage contribution of Indutech products in the international market (2019-20) ________ 115
Figure 9.18: Production vs consumption of Indutech segment in the domestic market (Rs Crores) _______ 115
Figure 9.19: Percentage contribution of Meditech products in the domestic market (2019-20) ___________ 124
Figure 9.20: Percentage contribution of Meditech products in the international market (2019-20) ________ 124
Figure 9.21: Production vs consumption of Meditech segment in the domestic market (Rs Crores) _______ 125
Figure 9.22: Percentage contribution of Mobiltech products in the domestic market (2019-20) __________ 138
Figure 9.23: Percentage contribution of Mobiltech products in the international market (2019-20) _______ 139
Figure 9.24: Production vs consumption of Mobiltech segment in the domestic market (Rs Crores) _______ 139
Figure 9.25: Percentage contribution of Packtech products in the domestic market (2019-20) ___________ 146
Figure 9.26: Percentage contribution of Packtech products in the international market (2019-20) ________ 146
Figure 9.27: Production vs consumption of Packtech segment in the domestic market (Rs Crores) _______ 147
Figure 9.28: Percentage contribution of Protech products in the domestic market (2019-20) ____________ 152
Figure 9.29: Percentage contribution of Protech products in the international market (2019-20) _________ 153
Figure 9.30: Production vs consumption of Protech segment in the domestic market (Rs Crores) ________ 153
Figure 9.30: Percentage contribution of Sportech products in the domestic market (2019-20) ___________ 159
Figure 9.31: Percentage contribution of Sportech products in the international market (2019-20) ________ 159
Figure 9.33: Production vs consumption of Sportech segment in the domestic market (Rs Crores) _______ 160
Section 13: Analysis of Technical Textiles Trade of India

Figure 13.1: Value of Exports and Imports of Technical Textiles (2012-13 to 2019-20) (Rs. Crores) ______ 193
Figure 13.2: Trade Surplus (Deficit) across application segments from 2012-13 to 2019-20 (Rs. Crores) __ 194
Figure 13.3: Distribution of exports across segments (2019-20)___________________________________ 195
Figure 13.4: Import distribution across segments (2019-20) _____________________________________ 196
Figure 13.5: Value of Exports and Imports of Agrotech Segment (2012-13 to 2019-20) (Rs. Crores)______ 197
Figure 13.6: Value of Exports and Imports of Buildtech Segment (2012-13 to 2019-20) (Rs. Crores) _____ 200
Figure 13.7: Value of Exports and Imports of Clothtech Segment (2012-13 to 2019-20) (Rs. Crores) _____ 203
Figure 13.8: Value of Exports and Imports of Geotech Segment (2012-13 to 2019-20) (Rs. Crores) ______ 206
Figure 13.9: Value of Exports and Imports of Hometech Segment (2012-13 to 2019-20) (Rs. Crores)_____ 209
Figure 13.10: Value of Exports and Imports of Indutech Segment (2012-13 to 2019-20) (Rs. Crores)______ 212
Figure 13.11: Value of Exports and Imports of Meditech Segment (2012-13 to 2019-20) (Rs. Crores) _____ 215
Figure 13.12: Value of Exports and Imports of Mobiltech Segment (2012-13 to 2019-20) (Rs. Crores) _____ 218
Figure 13.13: Value of Exports and Imports of Packtech Segment (2012-13 to 2019-20) (Rs. Crores)______ 221
Figure 13.14: Value of Exports and Imports of Protech Segment (2012-13 to 2019-20) (Rs. Crores) _______ 224
Figure 13.15: Value of Exports and Imports of Sportech Segment (2012-13 to 2019-20) (Rs. Crores) ______ 227
Figure 13.16: Representation of 8-digit HSN code _______________________________________________ 232
Section 15: National and State Policies and Schemes

Figure 15.1: Details of TMTT scheme (schematic representation) _________________________________ 249
Figure 15.2: Four Components of National Technical Textiles Mission ______________________________ 252
Section 16: Formulation of Indian Standards for Technical Textiles

Figure 16.1: Development process for standards at BIS _________________________________________ 277
Section 17: Status and Contribution of Textile Research Associations

Figure 17.1: Chronological order of establishment of TRAs in India ________________________________ 281
Figure 17.2: Funded and sponsored projects undertaken by TRAs in percentage (2015-2020)___________ 283
Figure 17.3: Funded and sponsored projects by TRA undertaken by TRAs in Rs. Crores (2015-2020) _____ 283
Figure 17.4: In-house projects by TRAs in percentage (2015 -2020) _______________________________ 284
Figure 17.5: In-house projects by TRAs in Rs. Crores (2015-2020) ________________________________ 284
Figure 17.6: Average duration of projects (Segment-wise in number of years, 2015-2020) _____________ 285
Figure 17.7: Top ten consultancy projects by TRAs (Rs. Crores) __________________________________ 285
Figure 17.8: Number of participants trained by TRAs (2015-2020) _________________________________ 286
Figure 17.9: Revenue generated by TRAs (Activity-wise as percentage, 2015-2020) __________________ 286
Figure 17.10: Revenue generated by TRAs (Activity-wise in Rs. Crores, 2016-2020)____________________ 287
Figure 17.11: Patents applied for by TRAs (2015-2020) __________________________________________ 287
Figure 17.12: Machines and equipment procured by TRAs (2015-2020) _____________________________ 288
Figure 17.13: Challenges faced by Indian TRAs _________________________________________________ 290
Figure 17.14: Current needs of the Indian textile industry ________________________________________ 291
Figure 17.15: Policy suggestions ____________________________________________________________ 292
Section 18: Status and Contribution of Centres of Excellence in India

Figure 18.1: Geographical spread of COEs in India _____________________________________________ 294
Figure 18.2: Revenues generated from various sources by COEs in Rs. Crores (2015-2020) ____________ 295
Figure 18.3: Testing standards used by COEs (As percentage, 2015-2020) __________________________ 296
Figure 18.4: Testing standards used by COEs (Segment-wise as percentage, 2015-2020) ______________ 296
Figure 18.5: Publications by COEs (Segment-wise as percentage, 2015-2020) _______________________ 297
Figure 18.6: Number of academic projects completed (2015-2020) ________________________________ 298
Section 20: Technical Textiles Education in India

Figure 20.1: Distribution of faculty in various positions __________________________________________ 310
Figure 20.2: Funded/sponsored projects undertaken by Academic Institutions (2015-2020) ____________ 311
Figure 20.3: Segment-wise distribution of 87 funded/sponsored projects in last six years (2015-20) _____ 315
Figure 20.4: Machines and equipment installed in the years 2017-2020 ____________________________ 315
Figure 20.5: Segment-wise bifurcation of technical textiles-related start-ups_________________________ 318
Figure 20.6: Major skill gaps in textile education and ways to address them as reported by
respondents _________________________________________________________________ 318
Figure 20.7: Technology gaps in textile education and ways to address them as reported by
respondents _________________________________________________________________ 320
Figure 20.8: Mechanisms to strengthen technical textiles education _______________________________ 326
Figure 20.9: Expectations from TRAs by academic institutions ____________________________________ 328
Section 22: Status and Contribution of Integrated Textile Parks
Figure 22.1: The timeline of technical textile parks in India ______________________________________ 344
Section 23: Technical Textiles product manufacturing firms: Findings from

primary survey
Figure 23.1: Geographical spread of respondent firms __________________________________________ 348
Figure 23.2: Distribution of respondent firms based on Ownership ________________________________ 348
Figure 23.3: Distribution of respondent firms (MSMEs and Non-MSMEs) ____________________________ 349
Figure 23.4: Distribution of the respondent firms operating in various segments _____________________ 350
Figure 23.5: Segments-wise representation of respondent firms __________________________________ 353
Figure 23.6: Total revenue of the respondent firms (Rs. Crores) __________________________________ 354
Figure 23.7: Contribution of each segment to total revenue (percent) ______________________________ 354
Figure 23.8: Domestic sales and exports under Agrotech segment (Rs. Crores) ______________________ 355
Figure 23.9: Domestic sales under Buildtech segment (Rs. Crores) ________________________________ 356
Figure 23.10: Domestic sales and exports under Clothtech segment (Rs. Crores) ______________________ 357
Figure 23.11: Domestic sales and exports under Geotech segment (Rs. Crores) _______________________ 357
Figure 23.12: Domestic sales and exports under Hometech segment (Rs. Crores) _____________________ 358
Figure 23.13: Domestic sales under Indutech segment (Rs. Crores) ________________________________ 359
Figure 23.14: Domestic sales and exports under Meditech segment (Rs. Crores) ______________________ 359
Figure 23.15: Domestic sales and exports under Mobiltech segment (Rs. Crores) _____________________ 360
Figure 23.16: Domestic sales and exports under Packtech segment (Rs. Crores) ______________________ 361
Figure 23.17: Domestic sales and exports under Protech segment (Rs. Crores) _______________________ 361
Figure 23.18: Domestic sales and exports under Sportech segment (Rs. Crores) ______________________ 362
Figure 23.19: Consumption of technical textile products by different user industries ___________________ 363
Figure 23.20: Raw material used by technical textile product manufacturing firms ____________________ 364
Figure 23.21: Comparative share of expenditure on raw materials (domestic and international sources)____ 366
Figure 23.22: Relative consumption (segment-wise) of imported raw materials from different countries ____ 366
Figure 23.23: Manufacturing processes used by technical textile firms in India (percentage of firms) ______ 369
Figure 23.24: Nonwoven textile manufacturing processes used by technical textile firms in India _________ 370
Figure 23.25: Some other textile manufacturing processes used by technical textile firms in India ________ 371
Figure 23.26: Segment wise distribution (relative frequency) of textile manufacturing processes used by
technical textile firms in India ___________________________________________________ 371
Figure 23.27: Comparison of share of costs incurred on purchase of machines from domestic and international
suppliers ____________________________________________________________________ 373
Figure 23.28: Source countries of machines imported by Indian technical textile manufacturing firms _____ 374
Figure 23.29: Leading export destinations for technical textile products from India ____________________ 378
Figure 23.30: Employment details: Skilled, semi-skilled and unskilled employees (numbers) _____________ 380
Figure 23.31: Preference for future diversification (percentage respondents) _________________________ 383
Figure 23.32: Preference for expansion in current operating segment (percentage respondents) _________ 384
Figure 23.33: Porter’s five forces in the Indian technical textile industry _____________________________ 386
Section 24: Fibre, filament and technical yarn manufacturing firms: Findings
from primary survey
Figure 24.1: Production capacity and quantity produced by respondent raw material manufacturing
firms in India ________________________________________________________________ 393
Section 26: Contribution of Manufacturers’ Associations

Figure 26.1: Applications of Composites in various sectors _______________________________________ 405
Section 27: Stakeholders’ Workshops
Figure 27.1: Factors affecting the growth of technical textile industry in India _______________________ 426
Figure 27.2: Barriers to growth ____________________________________________________________ 427
Figure 27.3: Enablers of growth ____________________________________________________________ 427
Figure 27.4: Factors responsible for technological gaps in technical textile industry in India ____________ 428
Figure 27.5: Impediments to adoption of advanced technologies in Indian technical textile industry______ 429
Section 28: Emerging Technologies and Technology Trends in Technical Textiles

Figure 28.1: (a) Mechanism of cooling and heating by phase change material and (b) fabric coated with
Schoeller®-PCM™ ____________________________________________________________ 436
Figure 28.2: Textile sensors based (a) Smart sports bra (b) Sleep lounge suit (c) Yoga pants and
(d) Basketball shoes ___________________________________________________________ 437
Figure 28.3: XUPERMASK Technology _______________________________________________________ 437
Figure 28.4: Different textile fabrics loaded with (a) pain killer (b) insect repellent and (c) silver for better
wound healing _______________________________________________________________ 438
Figure 28.5: Self-powered microsystems based on textile-based triboelectric nanogenerators ___________ 439
Figure 28.6: (a) Application of piezoelectric nanogenerator and (b) Commercial products manufactured by
PIECLEX ____________________________________________________________________ 440
Figure 28.7: Nonwovens with different cavities manufactured with HydroSpace technology _____________ 440
Figure 28.8: neXlineWetlace process flow ____________________________________________________ 441
Figure 28.9: Flushable green wipes by Wetlace process _________________________________________ 441
Figure 28.10: (a) Hyper-punch needle loom and (b) needle module used ____________________________ 441
Figure 28.11: (a) Phantom technology and (b) manufactured end-product ___________________________ 442
Figure 28.12: Electro-spinning production line for nonwoven ______________________________________ 443
Figure 28.13: Electro-spun fibrous web _______________________________________________________ 443
Figure 28.14: Process flow of vertical lapping process and cross-sectional images of different samples
Manufactured [22] ____________________________________________________________ 444
Figure 28.15: Pictorial presentation of (a) 3D web formation technique (b) structure of end product (c)
end-product with 5 mm spacer using fork type needle________________________________ 444
Figure 28.16: Different types of textile-preforms used as composite reinforcement ____________________ 446
Figure 28.17: Quasi-isotropic braided triaxial fabric ______________________________________________ 447
Figure 28.18: (a) Process flow of “D3D” process (b & c) Final products prepared by this method _________ 448
Figure 28.19: Radial braiding technique _______________________________________________________ 449
Figure 28.20: Fully automated 3D Knitting Technology ___________________________________________ 449
Figure 28.21: (a, b, c & d) Schematic of the Noobing process with three yarn layers, (e, f, g & h) Noobed fabric
prepared by corresponding four steps (i & j) Noobed fabric with 11 and 3 layers,
(k) commercially available carbon fibre based noobed fabric ___________________________ 450
Figure 28.22: Process flow of WEAV3D process from tape to composite __________________________________ 451
Figure 28.23: 3D woven preform (a) manufacturing process by jacquard loom (b & c) 3D woven preform of
aeroplane parts ______________________________________________________________ 451
TABLES
Section 4: Exhaustive list of technical textile products
Table 4.1: Agrotech Products ____________________________________________________________ 13
Table 4.2: Buildtech products ____________________________________________________________ 14
Table 4.3: Clothtech products ____________________________________________________________ 15
Table 4.4: Geotech products _____________________________________________________________ 16
Table 4.5: Hometech products ___________________________________________________________ 16
Table 4.6: Indutech products ____________________________________________________________ 18
Table 4.7: Meditech products ____________________________________________________________ 19
Table 4.8: Mobiltech products ____________________________________________________________ 21
Table 4.9: Oekotech products ____________________________________________________________ 23
Table 4.10: Packtech products ____________________________________________________________ 23
Table 4.11: Protech products _____________________________________________________________ 24
Table 4.12: Sportech products ____________________________________________________________ 26
Table 4.13: Smart Textiles products ________________________________________________________ 27
Section 5: Institutional Consumers of Technical Textiles in India

Table 5.1: Technical textile products procured by Government organizations & PSUs ________________ 34
Section 7: Employment potential of technical textiles in India

Table 7.1: Estimated employment in India’s technical textile industry ____________________________ 44
Table 7.2: Progress of ATUFS as regards to technical textiles __________________________________ 46
Table 7.3: Projected employment in India’s technical textile industry ____________________________ 47
Table 7.4: Educational qualification and skills required for various jobs under technical textiles ________ 47
Section 9: Domestic and Global markets of Technical Textiles

Table 9.1: Market size of technical textile segments in India - Rs. Crores (US$ Billion) _______________ 80
Table 9.2: Market size of technical textile segments in the world (USD Million) _____________________ 81
Table 9.3: Agrotech – World and India market size 2019-20 ____________________________________ 84
Table 9.4: Buildtech – World and India market size 2019-20 ____________________________________ 89
Table 9.5: Clothtech – World and India market size 2019-20 ___________________________________ 95
Table 9.6: Geotech – World and India market size 2019-20 ____________________________________ 101
Table 9.7: Hometech – World and India market size 2019-20 ___________________________________ 109
Table 9.8: Indutech – World and India market size 2019-20 ____________________________________ 116
Table 9.9: Meditech – World and India market size 2019-20 ____________________________________ 125
Table 9.10: Mobiltech – World and India market size 2019-20 ___________________________________ 140
Table 9.11: Packtech – World and India market size 2019-20 ____________________________________ 147
Table 9.12: Protech – World and India market size 2019-20 _____________________________________ 154
Table 9.13: Sportech – World and India market size 2019-20 ____________________________________ 160
Section 10: Leading Countries in Technical Textiles: A Comparison

Table 10.1: Annual output and CAGR of Technical Textiles in India and the leading countries (2018) ____ 166
Table 10.2: Exports of Technical Textiles by leading countries and India (2019) _____________________ 167
Table 10.3: Share of technical textiles in textiles and its major products (2019) _____________________ 167
Table 10.4: Large enterprises producing technical textiles in each country __________________________ 167
Table 10.5: Premier academic institution(s) for education in technical textiles in India and in leading
countries ___________________________________________________________________ 168
Table 10.6: Prominent R&D facilities/institutions for technical textiles in India and in leading countries ___ 168
Section 11: Future demand and Trade expectations in Technical Textiles

Table 11.1: Exports of technical textiles by leading countries and India (2019) ______________________ 170
Section 12: Attractiveness of different states for technical textile manufacturers

Table 12.1: Comparison of support offered by states to Textile/Technical textile industry
(states covered: Andhra Pradesh, Bihar, Gujrat, Haryana, Jharkhand) ___________________ 178
(states covered: Karnataka, Kerela, Madhya Pradesh and Maharashtra) __________________ 181
(states covered: Orissa, Punjab, Rajasthan and Tamilnadu) ___________________________ 183
(states covered: Telangana, Uttar Pradesh, Uttarakhand and West Bengal) _______________ 187

Table 13.1: Comparison of Export and Import Data of Technical Textiles (Rs. Crores) ________________ 194
Table 13.2: Five countries with largest imports of Indian technical textiles items (2019-20) ____________ 195
Table 13.3: Five largest exporters of Technical Textiles items to India (2019-20) ____________________ 196
Table 13.4: Comparison of India’s Exports and Imports of Agrotech Segment (Rs. Crores) _____________ 198
Table 13.5: Export share of top four Agrotech items in 2019-20 along with item description ___________ 198
Table 13.6: Five countries with largest imports of Indian Agrotech items (2019-20) __________________ 199
Table 13.7: Import share of top three Agrotech items in 2019-20 along with item description __________ 199
Table 13.8: Five largest exporters of Agrotech items to India (2019-20) ___________________________ 200
Table 13.9: Comparison of Exports and Imports of Buildtech Segment (Rs. Crores) __________________ 201
Table 13.10: Export share of top five Buildtech items in 2019-20 along with item description____________ 201
Table 13.11: Five countries with largest imports of Indian Buildtech items (2019-20) __________________ 202
Table 13.12: Import share of top five Buildtech items in 2019-20 along with item description ___________ 202
Table 13.13: Five largest exporters of Buildtech items to India (2019-20) ___________________________ 203
Table 13.14: Comparison of Exports and Imports of Clothtech Segment (Rs. Crores) __________________ 203
Table 13.15: Export share of top five Clothtech products in 2019-20 along with item description _________ 204
Table 13.16: Five countries with largest imports of Indian Clothtech items (2019-20) __________________ 205
Table 13.17: Import share of top five Clothtech items in 2019-20 along with item description ___________ 205
Table 13.18: Five largest exporters of Clothtech items to India (2019-20) ___________________________ 206
Table 13.19: Comparison of Exports and Imports of Geotech Segment (Rs. Crores) ___________________ 206
Table 13.20: Export share of top three Geotech items in 2019-20 along with item description ___________ 207
Table 13.21: Five countries with largest imports of Indian Geotech items (2019-20) ___________________ 208
Table 13.22: Import share of top two Geotech items in 2019-20 along with item description ____________ 208
Table 13.23: Five largest exporters of Geotech items to India (2019-20) ____________________________ 208
Table 13.24: Comparison of Exports and Imports of Hometech Segment (Rs. Crores)__________________ 209
Table 13.25: Export share of top five Hometech items in 2019-20 along with item description ___________ 210
Table 13.26: Five countries with largest imports of Indian Hometech items (2019-20) _________________ 210
Table 13.27: Import share of top five Hometech items in 2019-20 along with item description __________ 211
Table 13.28: Five largest exporters of Hometech items to India (2019-20) __________________________ 211
Table 13.29: Comparison of Exports and Imports of Indutech Segment (Rs. Crores)___________________ 212
Table 13.30: Export share of top five Indutech items in 2019-20 along with item description ____________ 213
Table 13.31: Five countries with largest imports of Indian Indutech items (2019-20) __________________ 213
Table 13.32: Import share of top five Indutech items in 2019-20 along with item description ___________ 214
Table 13.33: Five largest exporters of Indutech items to India (2019-20) ____________________________214
Table 13.34: Comparison of Export and Import data of Meditech Segment (Rs. Crores) ________________ 215
Table 13.35: Export share of top five Meditech items in 2019-20 along with item description ____________ 216
Table 13.36: Five countries with largest imports of Indian Meditech items (2019-20) __________________ 216
Table 13.37: Import share of top five Meditech items in 2019-20 along with item description ___________ 217
Table 13.38: Five largest exporters of Meditech items to India (2019-20) ___________________________ 217
Table 13.39: Comparison of Export and Import data of Mobiltech Segment (Rs. Crores)________________ 218
Table 13.40: Export share of top five Mobiltech items in 2019-20 along with item description ___________ 219
Table 13.41: Five countries with largest imports of Indian Mobiltech items (2019-20) __________________ 219
Table 13.42: Import share of top five Mobiltech items in 2019-20 along with item description ___________ 220
Table 13.43: Five largest exporters of Mobiltech items to India (2019-20) ___________________________ 220
Table 13.44: Comparison of Exports and Imports of Packtech Segment (Rs. Crores)___________________ 221
Table 13.45: Export share of top five Packtech items in 2019-20 along with item description ____________ 222
Table 13.46: Five countries with largest imports of Indian Packtech items (2019-20) __________________ 222
Table 13.47: Import share of top five Packtech items in 2019-20 along with item description____________ 223
Table 13.48: Five largest exporters of Packtech items to India (2019-20) ___________________________ 223
Table 13.49: Comparison of Exports and Imports of Protech Segment (Rs. Crores) ____________________ 224
Table 13.50: Export share of top five Protech items in 2019-20 along with item description _____________ 225
Table 13.51: Five countries with largest imports of Indian Protech items (2019-20) ___________________ 226
Table 13.52: Import share of top five Protech items in 2019-20 along with item description_____________ 226
Table 13.53: Five largest exporters of Protech items to India (2019-20) ____________________________ 227
Table 13.54: Comparison of Exports and Imports data of Sportech Segment (Rs. Crores) ______________ 228
Table 13.55: Export share of top five Sportech items in 2019-20 along with item description ____________ 228
Table 13.56: Five countries with largest imports of Indian Sportech items (2019-20) __________________ 229
Table 13.57: Import share of top five Sportech items in 2019-20 along with item description____________ 229
Table 13.58: Five largest exporters of Sportech items to India (2019-20) ___________________________ 230
Table 13.59: Surplus and Deficit segments (2019-20) ___________________________________________ 230
Table 13.60: Fastest growing segment in terms of exports from 2012-13 to 2019-20 (Rs. Crores) ________ 231
Table 13.61: Fastest growing segment in terms of imports from 2012-13 to 2019-20 (Rs. Crores) ________ 231
Table 13.62: Identification of 532 codes from three different sources ______________________________ 233
Table 13.63: Total 449 HSN codes after revision _______________________________________________ 234
Section 14: International Trade of Technical Textiles & India’s contribution

Table 14.1: Export Data based on HS Codes of 63 key products (US$ Million) _______________________ 235
Table 14.2: Major exporting countries for 63 key products (US$ Million) ___________________________ 238

Table 15.1: National level policies and schemes for technical textile industry ________________________ 242
Table 15.2: Progress of ATUFS as regards technical textiles _____________________________________ 246
Table 15.3: Technology upgradation funds schemes (TUFS) through the years ______________________ 246
Table 15.4: List of four CoEs established initially under SGDTT ___________________________________ 248
Table 15.5: Four CoEs established under TMTT _______________________________________________ 248
Table 15.6: Financial progress of the scheme for promoting usage of Agrotextiles in North East Region __ 250
Table 15.7: Financial progress of the scheme for promoting usage of Geotechnical textiles in the
North East Region ____________________________________________________________ 251
Table 15.8: Trade statistics for 207 technical textile items (Rs. Crores) ____________________________ 252
Table 15.9: Classifications of zone in Karnataka _______________________________________________ 262
Table 15.10: Incentives schemes for technical textile sector as part of Karnataka State textile policy _____ 262
Table 15.11: Subsidies offered to various categories of technical textile production units _______________ 265
Table 15.12: Capital subsidy under Orissa industrial policy resolution 2015 __________________________ 266
Table 15.13: Model of financial assistance for capital assistance in technical textile units _______________ 271
Table 15.14: Power tariff subsidies across ____________________________________________________ 272

Table 16.1: Number of standards developed and being developed by BIS in different segments of
Technical Textiles _____________________________________________________________ 278
Table 16.2: New standards under development in Agrotech _____________________________________ 279
Table 16.3: New standards under development in Geotech ______________________________________ 280
Table 16.4: New standards under development in Indutech _____________________________________ 280
Table 16.5: New standards under development in Meditech _____________________________________ 280
Table 16.6: New standards under development in Mobiltech _____________________________________ 280
Table 16.7: New standards under development in Protech ______________________________________ 280

Table 17.1: TRAs and their specializations ___________________________________________________ 282
Table 17.2: Research Scientists in Textile Research Associations _________________________________ 282
Table 17.3: Emerging products and segments in technical textiles _______________________________ 288

Table 18.1: Details of the COEs ____________________________________________________________ 293
Table 18.2: Number of publications by COEs (2015-2020) ______________________________________ 297
Table 18.3: Number of academic projects completed at different levels (2015-2020) _________________ 299
Section 19: Practices of Indian COEs and COEs in other countries: A Comparison
Table 19.1: Particulars of premier international COEs __________________________________________ 302
Table 19.2: Recent projects of premier international COEs ______________________________________ 303
Table 19.3: Latest manufacturing and testing facilities available with premier international COEs________ 305
Table 19.4: Recent knowledge dissemination initiatives of premier international COEs ________________ 306
Section 20: Technical Textiles Education in Academic Institutions and

Universities in India
Table 20.1: Textiles related programmes offered, sanctioned strength and number of students
passed out __________________________________________________________________ 309
Table 20.2: Institutions/Universities offering Ph.D. programmes in textiles (2019) ___________________ 309
Table 20.3: Faculty resources (2019) _______________________________________________________ 310
Table 20.4: Library Resources _____________________________________________________________ 311
Table 20.5: Funded/sponsored projects reported by Academic Institutions (2015-2020) _______________ 311
Table 20.6: Number of students placed in conventional textiles and technical textiles sector
(2015- 2019) ________________________________________________________________ 316
Table 20.7: Patents related to technical textiles products/ machinery/ raw materials for the
period 2015-2020 _____________________________________________________________ 316
Table 20.8: Number of Publications (2015-2020) ______________________________________________ 317
Table 20.9: Products of the start-ups reported by respondent institutions (segment-wise) _____________ 317
Table 20.10: Emerging areas in global technical textiles education where the Indian
Institutes / Universities must focus _______________________________________________ 322
Table 20.11: Challenges faced by Indian academic institutions in imparting technical textiles
education ___________________________________________________________________ 323
Table 20.12: New programmes related to technical textiles that Indian Institutes / Universities
must offer in future ___________________________________________________________ 324
Table 20.13: Courses in subjects related to technical textiles offered in world’s premier universities ______ 330
Table 20.14: Indicative list of research projects by students at NCSU _______________________________ 331
Table 20.15: Some recent industry-academia collaboration arrangements in premier universities_________ 331
Table 20.16: Innovation centres in premier universities __________________________________________ 332
Table 20.17: Scholarships in premier universities _______________________________________________ 333
Table 20.18: External mechanisms for monitoring and evaluation__________________________________ 334
Table 20.19: Faculty student ratio in premier universities ________________________________________ 334
Section 21: Status and Contribution of Focus Incubation Centres

Table 21.1: Progress of the Focus Incubation Centres __________________________________________ 338
Section 22: Status and Contribution of Integrated Textile Parks

Table 22.1: Status of Technical Textile Parks _________________________________________________ 344
Table 22.2: Companies in Vraj Integrated Textile Park Ltd. ______________________________________ 345
Table 22.3: Companies in Mundra SEZ Textile and Apparel Parks Pvt. Ltd.__________________________ 345
Table 22.4: Reasons for delays, dormancy and cancellation of technical textile parks _________________ 345
Section 23: Technical Textiles product manufacturing firms: Findings from

primary survey
Table 23.1: List of technical textile products manufactured by respondent firms ____________________ 350
Table 23.2: Raw material used by technical textile product manufacturing firms (percentage of respondents)
___________________________________________________________________________ 364
Table 23.3: List of products imported by technical textiles product manufacturers ___________________ 367
Table 23.4: List of important machines installed by technical textile product manufacturing firms in India 372
Table 23.5: List of machinery imported from the various countries ________________________________ 375
Table 23.6: Products exported by Indian Technical Textile manufacturing __________________________ 376
Table 23.7: Summary of major foreign investments related to Technical Textiles (2015-20) ____________ 379
Table 23.8: Manpower and employment in the respondent firms _________________________________ 379
Table 23.9: Employee training programmes conducted for employees of Technical Textiles
product manufacturing firms in India _____________________________________________ 381
Table 23.10: Porter five-force core of respondent firms manufacturing technical textiles products in India _ 386
Table 23.11: Reasons behind the prevalence of porter’s five forces in Indian technical textile industry:
Respondents views____________________________________________________________ 386
Table 23.12: Machines related problems faced by Technical Textile manufacturing firms _______________ 389
Table 23.13: Trained staff related problems faced by Technical Textile manufacturing firms ____________ 389
Table 23.14: Technology related problems faced by Technical Textile manufacturing firms _____________ 389
Table 23.15: Government policy related problems faced by Technical Textile manufacturing firms________ 389
Table 23.16: Other problems faced by Technical Textile manufacturing firms ________________________ 390
Section 24: Fibre, filament and technical yarn manufacturing firms: Findings
from primary survey
Table 24.1: Types and forms of fibres, filaments and technical yarns manufactured in India ___________ 391
Table 24.2: Segment-wise raw materials supplied by raw material manufacturers in India _____________ 392
Table 24.3: Type and forms of fibre, filament or technical yarn manufactured in India ________________ 394
Table 24.4: Import of raw materials by fibre, filament and technical yarn manufacturers in India _______ 394
Section 25: Technical Textile Machine Manufacturing Firms: Findings from

primary survey
Table 25.1: Machines manufactured, assembled, imported and marketed by the respondent firms ______ 398
Table 25.2: Machines supplied to various segments of technical textiles ___________________________ 398
Table 25.3: Technical textile related machines imported in India _________________________________ 399

Table 26.1: Raw material, technology, domestic demand and capacity, and imports of filaments ________ 402
Table 26.2: Types of Technical Textile machines/spares manufactured, supplied, and exported from India 407
Table 26.3: Different Types of Textile Machines which can be produced in India _____________________ 409

Table 28.1: Stitch Bonding Techniques ______________________________________________________ 445
Table 28.2: Agrotech ____________________________________________________________________ 452
Table 28.3: Geotech_____________________________________________________________________ 454
Table 28.4: Indutech ____________________________________________________________________ 455
Table 28.5: Meditech ____________________________________________________________________ 457
Table 28.6: Mobiltech ___________________________________________________________________ 458
Table 28.7: Protech _____________________________________________________________________ 459
List of Abbreviations
APQP Advanced Product Quality Planning
AATCC The American Association of Textile Chemists and Colorists
AB Cotton Absorbent Bleached Cotton
ACW American Cord & Webbing
CAN Acrylonitrile
ADD Anti-Dumping Duty
ADL Acquisition Distribution Layer
ADRDE Aerial Delivery Research and Development Establishment
AFFOA Advanced Functional Fabrics of America Institute
AFRPCDC Advanced Fibre Reinforced Polymer Composite Development Centre
AGM Absorbent/Absorbable Glass Mats
AICTE All India Council for Technical Education
AIIMS All India Institute of Medical Sciences
AL Artificial Lung
ALC Automatic Level Control
ALF Acute Liver Failure
AMD Advanced Materials Division
APE Apparel Parks for Exports
ASFI Association of Synthetic Fibre Industry
ATIC Advanced Textile Innovation Center
ATIRA Ahmedabad Textile Industry’s Research Association
A-TUFS Amended Technology Upgradation Fund Scheme
BAL Bioartificial Liver Device
BBA British Board of Agreement
BCI Better Cotton Initiative
BFL Buffered FET (Field Effect Transistor)
BIS Bureau of Indian Standards
BOPET Biaxially-Oriented Polyethylene Terephthalate
BOPP Biaxially-Oriented Polypropylene
BPJ Bullet Proof Jackets
BRO Border Roads Organisation
BSCI Business Social Compliance Initiative
BSDM Bihar Skill Development Mission
BTRA Bombay Textiles Research Association
CAGR Compound Annual Growth Rate
CBC Carpet Backing Cloth
CBR Continuous Bleaching Range
CE Conformitè Europëenne
CEP Continuing Education Programmes
CII Confederation of Indian Industries
CMTA Cluster Management Technical Agency
CoE Centres of Excellence
CPC Chemical Protective Clothing
CSIR Centre for Scientific & Industrial Research
CSR Corporate Social Responsibility
CST Central Sales Tax
CTRM Composites Technology Research Malaysia
CUMI Carborundum Universal Ltd.
DBMR Data Bridge Market Research
DEBEL Defence Bioengineering & Electro Medical Laboratory
DITF Deutsche Institute für Textilund Faserforschung Denkendorf
DGFT Directorate General of Foreign Trade
DMF Dimethylformamide
DMP Dot Matrix Printer
DMSRDE Defence Materials and Stores Research and Development Establishment
DRDO Defence Research & Development Organisation
DSR Demand Signal Repository
DVT Deep Vein Thrombosis
ECMO Extra Corporeal Membrane Oxygenation
EDC Entrepreneurship Development Cell
ELS Extracorporeal Liver Support
EOU Export Oriented Unit
EPC Engineering, Procurement and Construction
EPS Expanded Polystyrene
ETP Effluent Treatment Plants
FCI Fixed Capital Investment
FDI Foreign Direct Investment
FDP Faculty Development Programmes
FIBC Flexible Intermediate Bulk Containers
FIC Focus Incubation Centres
FICCI Federation of Indian Chambers of Commerce & Industry
FICTT Focus Incubation Centre in Technical Textiles
FPIS Focus Product Incentive Scheme
FR Fire Retardant
FR Flame Resistant
FRP Fibreglass Reinforced Plastic, Fibre-Reinforced Plastic
FTA Free Trade Agreement
GCL Geosynthetic Clay Liners
GEN Global Ecolabelling Network
GI Geographical Indicator
GMP Good Manufacturing Processes
GSE GundleSLE Environmental
HAIs Hospital Acquired Infections
H&V Hollingsworth & Vose Company
Hazmat Hazardous Material
HDPE High-Density Polyethylene
HEPA High Efficiency Particulate Air
HMPSA Hot Melt Pressure Sensitive Adhesive
HS Harmonized System
HSN Harmonized System of Nomenclature
HTHP High Temperature High Pressure
HUL Hindustan Unilever Ltd.
HVAC Heating, Ventilation, and Air Conditioning
IAC International Automotive Components
ICAR Indian Council of Agricultural Research
ICT Institute of Chemical Technology
IDY Industrial Yarn
IIT Indian Institute of Technology
IJIRA Indian Jute Industries' Research Association
IMS Integrated Management System
IoT Internet of Things
IPA Investment Promotion Assistance
IRC Indian Road Congress
IRRI Indian Road Research Institute
ITAMMA Indian Textile Accessories and Machinery Manufacturers Association
ITC Indian Trade Classification or Indian Tariff Code
ITP Integrated Textile Park
ITTA Indian Technical Textiles Association
ITUFS Integrated Software for Technology Upgradation Fund Scheme
JATC Joint Advanced Technology Centre
JPM Act Jute Packaging Materials (Compulsory Use in Packing Commodities) Act, 1987
JV Joint Venture
KITECH Korea Institute of Industrial Technology
LDPE Low-Density Polyethylene
LLDPE Linear Low Density Polyethylene
LRTM Light Resin Transfer Moulding
MANTRA Man Made Textiles Research Association
MDB Medical Disposable Baggage
MDR Medical Device Rule
MEIS Merchandise Exports India Scheme
MIPL Megaplast India Private Limited
MMF Manmade Fibre
MoT Ministry of Textiles
MP Medical Packaging
MPIDC MP Industrial Development Corporation
MSMEs Micro, Small and Medium-sized Enterprises
MTPA Million Tonnes Per Annum
MTPM Metric Tons Per Month
MTUFS Modified Technology Upgradation Fund Scheme
MV Mechanical Ventilation
NAL National Aeronautical Laboratory
NBC Nuclear Biological and Chemical
NCSU North Carolina State University
NDT Non-Destructive Testing
NE Northeast
NIOSH National Institute for Occupational Safety and Health
NITRA Northern India Textiles Research Association
NTCF Nylon Tyre Cord Fabric
NTPEP National Transportation Product Evaluation Program
NTTM National Technical Textiles Mission
NVH Noise, Vibration and Harshness
OTB Over the Back
P&G Procter & Gamble
PA Polyamide
PCB Printed Circuit Board
PE Polyethylene
PEN Polyethylene Napthalate
PES Polyester
PFL Printed Fabric Label
PLI Production-Linked Incentive
PMGSY Pradhan Mantri Gram Sadak Yojana
PMU Project Management Unit
PP Polypropylene
PPAP Production Part Approval Process
PPE Personal Protective Equipment
PPP Public Private Partnership
PPY Polypyrrole
PSF Polyester Staple Fibre
PSU Public Sector Undertaking
PU Polyurethane
PVA Polyvinyl Alcohols
PVC Poly Vinyl Chloride
PVDF Polyvinylidene Fluoride
QC Quality Control
QCO Quick Change Over
QCR Quick Curve Ruler
R&D Research and Development
RDSO Research Design & Standards Organisation
RIL Reliance Industries Ltd.
RR-TUFS Revised-Restructured Technology Up-gradation Fund Scheme
RTM Resin Transfer Moulding
RTUFS Restructured Technology Upgradation Fund Scheme
SAC State Administrative Council
SASMIRA Synthetic & Art Silk Mills' Research Association
S-CAP Scheme for Capital Assistance
SCBTS Scheme for Capacity Building in Textile Sector
SCM Supply Chain Management
SD Surgical Disposable
SDOs Standard Development Organisations
SEZ Special Economic Zone
SF Safety Factor
SFEAA Singlet Fission via Extended Aromaticity of Azacenes
SGDTT Scheme for Growth and Development of Technical Textiles
S-IP Scheme for Infrastructure Support
SITP Scheme for Integrated Textile Parks
SITRA South India Textiles Research Association
SMBS Sodium Metabisulphite
SMEs Small and Medium-sized Enterprises
SOR Schedule of Rates
SPV Special Purpose Vehicle
STP Science and Technology Parks
SUP Single Use Plastic
SWL Safe Working Load
TAF Thai Acrylic Fibre Co Ltd
TAML Tata Advanced Materials Limited
TASL Tata Advanced Systems Limited
TEI Textile Engineering Industry
TFIC The Textile Focus Incubation Centre
TFOS Tear Film and Ocular Surface Society
TIFAC Technology Information Forecasting and Assessment Council
TMAC Technical Advisory and Monitoring Committee
TMMA Textile Machinery Manufacturers Association
TMTT Technology Mission for Technical Textiles
TPACC Textile Protection and Comfort Center
TPU Thermoplastic Polyurethane
TQM Total Quality Management
TRAs Textile Research Associations
TT Technical Textiles
TTB Technical Textiles Business
TUF Technology Upgradation Fund
TUFS Technology Up-gradation Fund Scheme
TUL Technical University of Liberec
Type O Off Road Apparel
Type P Public Safety Sector Apparel
Type R Roadways and Temporary Traffic Control Zone Apparel
UHMWPE Ultra High Molecular Weight Polyethylene
ULPA Ultra Low Penetration Air
UN United Nations
USA United States of America
USKRC US Kidney Research Corporation
VAM Vinyl Acetate Monomer
VOCs Volatile Organic Compounds
VSSC Vikram Sarabhai Space Centre
WITS World Integrated Trade Solutions
WRA Wool Research Association
1. Executive Summary
Technical textile industry has been identified as the sunrise industry by the Ministry of Textiles, Government of
India. The National Technical Textile Mission (NTTM) with an outlay of Rs.1,480 Crores aims to place India as
one of the leaders in the global technical textile market and enhance the domestic market at the same time.
This Baseline Study 2020 entitled ‘Technical Textile Industry in India: Opportunities and Challenges’ has been
carried out by IIT Delhi on behalf of Ministry of Textiles, Government of India. The report of the study
encapsulates various aspects of technical textile industry in India. An attempt has been made to capture all
the important elements of the technical textile ecosystem and suggest measures to put this industry on an
accelerated growth trajectory that is aligned with the goals of NTTM of Government of India.
1.1 Methodology and Approach

A mixed method approach has been adopted in this study. As a part of primary research, primary surveys
(using semi-structured questionnaires), workshops with all sections of industry stakeholders, interviews of
industry practitioners, experts, members of the academia and policy makers and other professionals were
conducted. Secondary research involved drawing useful information by referring to existing databases,
reports, articles and information that is available in public domain. The primary basis of analysis is the
technical textile application segment. The 12 application segments considered are, Agrotech, Buildtech,
Clothtech, Hometech, Indutech, Geotech, Meditech, Mobiltech, Oekotech, Packtech, Protech, and Sportech.
1.2 Technical Textile Ecosystem

1.2.1 Introduction to Technical Textiles in India
As per the estimate by IIT Delhi, the size of Indian Technical Textiles industry is estimated at US$ 18.89
billion in FY 2019-20 and it is approximately 8.7% of US$ 217.81 Billion global technical textiles market. The
level of penetration of technical textiles in India is at 5-10% as compared to 30-70% observed in developed
countries. The aim of NTTM is to grow the domestic market at the rate of 15-20 percent per annum and take
the market size to US$ 40-50 Billion by the year 2024. The NTTM aims to facilitate market development,
market promotion, international collaborations, investment promotion and ‘Make in India’ initiatives. The
mission also aims to increase the annual value of exports of technical textiles from approximately Rs. 14,000
Crores at present to Rs. 20,000 Crores by year 2021-22 and ensure that exports grow at an average annual
rate of 10 percent up to 2023-24.
1.2.2 Exhaustive list of Technical Textile Products

The field of technical textiles is in its nascent stage and therefore, the rate of innovation and change is very
rapid. It is difficult to keep pace with changes, emerging typologies, categories and classification. Comprehensive
discussions among industry experts were carried out to prepare an exhaustive list of technical textile products.
_______________________________________________________________________________________________
Technical Textiles Industry in India: Opportunities and Challenges -i-

Section 1: Executive Summary
___________________________________________________________________________________________________
The same has been presented in this report. The products have been classified into their respective application
segment and marked for their being produced, consumed, exported and imported in India.
1.2.3 Institutional consumers of Technical Textiles in India

The important role played by institutional buyers in promoting the use of technical textiles in India has been
documented. The guidelines issued by Government of India which make it mandatory for 10 central ministries
and departments to use technical textiles in 92 application areas is a significant step to increase consumption.
The analysis of procurement information of Government institutions suggests that they have been active in
procurement of products such as fishnets, agrotextile kits, tarpaulins, tents, posters, uniforms, sports jersey,
geogrids, geomembranes, other geotextile products, floor carpets, vinyl coated upholstery, filter fabric, air and
oil filters, conveyor belts, surgical items, kneecaps, tyres, canal lining, jute bags, HDPE bags, bullet proof
jackets, flame retardant fabrics, fibre glass boat etc. in the recent past.
1.2.4 Investments in Technical Textile Industry in India

There has been an increase in investments in India’s technical textile industry. The segments that have
attracted relatively higher investor interest are Meditech, Protech, Mobiltech and Geotech. Production of
technical textiles for use in sustainable and eco-friendly products is receiving attention of investors. The
available information suggests that highest value of foreign investments has been routed through Mauritius;
other prominent countries of origin for investment in India include Belgium, USA and Singapore. The
maximum investments have been made in Gujarat followed by Maharashtra, Andhra Pradesh and Telangana.
1.2.5 Employment potential of Technical Textiles in India

India’s textiles and apparel industry contributes is the second largest employer in the country and provides
employment to about 45 million people. This figure is likely to have touched 55 million by the end of 2020. As
per the earlier figures stated by Ministry of Textiles, the Indian technical textile industry is estimated to be
employing about 12 lakh people directly and 3-4 times more indirectly in 2019-20. According to a fairly safe
and conservative estimate arrived at as part of this study, direct employment in 2019-20 is expected to be
around 12.16 lakhs. The Packtech segment is characterised by employment of a different kind where an
additional workforce that is involved in converting the technical textile into final products is deployed.
Anecdotal accounts of industry professionals peg the number of people involved in convertor industries at
around 1.75 lakh. The technical textile material that such converter industries make are Jute and hessian
bags, FIBC bags, Canvas tarpaulins and HDPE tarpaulins. The converter industry does the fabrication and
stitching from these specified technical textile fabrics.
The primary survey of product manufacturing enterprises carried out by IIT Delhi as a part of the present
Baseline survey (2020) has yielded that skilled manpower constitutes 51% of the manpower employed in the
industry. The skilled workforce will continue to form a significant part of total workforce in future. The survey
indicates that the overall growth in employment in technical textiles has been at a rate of around 7 percent.
The deployment of skilled workforce increased at the rate of 5 percent annually, semi-skilled workers
increased at 12 percent per year and unskilled workers at 8.5 percent in recent years. The semi-skilled
workforce is around 21 percent and unskilled workforce 28 percent of the total workforce.
_______________________________________________________________________________________________
Technical Textiles Industry in India: Opportunities and Challenges - ii -

___________________________________________________________________________________________________
The interventions of Government of India and various State Governments to support the growth of Technical
Textile industry have generated employment. The two textile parks (SITPs) associated with technical textiles
that are partly operational (Mundhra and Vraj Textile Parks) will provide employment to around 20,000 people
once these are fully operational. New employment for 26,536 people has been generated just on account of
the impact of Amended Technology Upgradation Fund Scheme (ATUFS). Samarth (Scheme for capacity
building in textile sector) aims to train 10 lakh persons over a period of 3 years (2017-20). Figures for
technical textiles are not available separately. Arrangements have been made under the National Technical
Textiles Mission (NTTM) for skill development of 50,000 people in the field of technical textiles. It will not be
unreasonable to assume that a growth rate of 4 percent can be safely assumed for projection of employment
generation from 2019-20 onwards and upto year 2024-25. Based on those projections, the employment in
India’s technical textiles industry is projected at 14.78 lakh persons by 2024-25.
The names of the main organisations which recruit professionals frequently for their technical textiles
operations are Supreme Nonwoven Industries Pvt. Ltd. as well as other firms of ‘Supreme Group’, Century
Enka Ltd., Techfab India Industries Ltd., SRF Ltd., Bombay Dyeing Ltd., Arvind Ltd. as well as other firms of
Arvind group, Welspun India Ltd. as well as other firms of Welspun Group, Alok Industries Ltd. and Premier
Mills Pvt. Ltd. as well as other firms of Premier Mills Group. The major concerns pertaining to manpower are
lack of adequate seats of ITIs and Polytechnics related to textile technology leave alone technical textiles and
qualified textile engineers switching industry from textiles to other than textiles.
1.2.6 Major Technical Textile firms in India

Delphi technique involving expert opinion was used to identify major firms of Indian technical textile industry.
The ten firms from the ones identified that finally agreed to be profiled were Arvind Ltd., BMD Private Ltd.,
Garware Technical Fibres Ltd., Kusumgar Corporates Pvt. Ltd., SRF Ltd., Strata Geosystems (India) Private
Ltd., Supreme Nonwoven Industries Private Ltd., Tata Advanced Systems Ltd., Techfab (India) Industries Ltd.
and Welspun India Ltd. Important information about these firms has been obtained from reliable sources
including the respective firms themselves. The information has been lucidly presented for each of these firms
so that industry analysts, observers and others who are interested can get information about these firms.
1.3 Market and Trade Analysis

1.3.1 Domestic and Global Markets of Technical Textiles
A detailed market analysis of technical textile industry and various segments has been done as a part of this
study. The sources of information for determining the current market size and developing the forecast include
primary survey of a sample of Indian technical textiles product manufacturers, raw material suppliers,
machinery manufacturers, interviews with industry experts for their assessment and opinions, study of various
national and international reports and referring to market research reports by leading industrial market
research agencies of the world. In addition to the relevant product, segment and industry-based research
reports published by the market research agencies, the reports and documents prepared by Ministry of
Textiles, Government of India, ICRA Management Consulting Services Limited, KPMG-FICCI, Invest India,
Exim Bank of India, Wazir Advisors-FICCI, World Bank, US Department of Commerce, BCC Research, CII have
been accessed for obtaining valid information. The valuable assessments made by industry associations such
_______________________________________________________________________________________________
Technical Textiles Industry in India: Opportunities and Challenges - iii -

___________________________________________________________________________________________________
as Indian Technical Textiles Association (ITTA), Confederation of Indian Industry (CII) and Federation of
Indian Chambers of Commerce & Industry (FICCI) have also been incorporated in the analysis.
As per the latest estimates of IIT Delhi, the global Technical Textiles market is expected to grow at a CAGR of
5.06% between 2020 and 2025 whereas the market in India is likely to grow at a CAGR of 8.25% during the
same period. The forecast arrived at by the research team suggests that the market for technical textiles in
India will grow in value from Rs. 122,943 Crores (US$ 18.89 Billion) in 2019-20 to Rs. 1,82,742 Crores (US$
28.06 Billion) in 2024-25. The market size of the textile industry in India is Rs. 7,11,409 Crores while that of
technical textiles is Rs. 1,22,943 Crores during 2019-20. Even as it currently contributes a relatively modest
portion i.e. 17% of the total textile market in India. The size of the technical textiles market in India is a small
proportion (8.7%) of the market size of technical textiles in the world in 2019-20. It is expected that by 2024-
25, the value of consumption (calculated at constant foreign exchange rates) of technical textiles in India is
likely to be 10.1% of global consumption of technical textiles in 2024-25.
The share of technical textiles in the total textile industry in India is expected to reach 28% by 2024-25. The
segments likely to grow at the fastest rates (at rates faster than a CAGR of 10%) in the Indian market are
Oekotech, Protech, Mobiltech, Geotech, Indutech, Agrotech and Buildtech. Packtech, which has been a
mainstay of the domestic technical textile market is expected to experience a moderated rate of growth. The
extent and nature of the success of India’s National Technical Textile Mission is likely to change these
forecasts depending on the response of the market to interventions made under the Mission.
At the global level, Oekotech, Geotech, Buildtech, Meditech, Protech and Sportech are the six segments that
are likely to grow at a relatively higher rate (CAGR > 5%) in terms of the value of technical textiles
consumption during the period 2020-25. Mobiltech, Indutech, Meditech, Packtech and Sportech will constitute
a major share of the value of the global market for technical textiles.
The market analysis of technical textiles has been presented at the level of products in each technical textile
segments except Oekotech because its products have an overlap with products of Geotech segment. The
products identified for detailed market analysis have been chosen because of the perceived moderate to high
possibility of success for Indian industry. Some of these products currently have a small domestic market but
a large global market and therefore present opportunities for India’s technical textiles manufacturers.
The production of Agrotech products (Rs. 2,244 Crores in 2019-20) in India exceeds their consumption (Rs.
1,890 Crores in 2019-20). This presents India with the possibility of exporting its surplus of production over
consumption. Fishing nets constitute the largest share of the Indian Agrotech market in 2019-20, followed by
Shade nets. Mulch mats, Anti-hail & Anti-bird nets and Crop covers individually hold small shares of Indian
market by value.
Consumption of Buildtech products exceeds their production. India is a net importer and the gap between
production (Rs. 4.196 Crores in 2019-20) and consumption (Rs. 5,008 Crores in 2019-20) is expected to
remain almost the same in value terms for the next five years. HDPE tarpaulin constituted the largest share
(by value) of the market of Indian Buildtech industry in 2019-20, followed by Hoardings & signages.
The consumption (value estimated at Rs. 8,205 Crores in 2019-20) of Clothtech products exceeds the
production (estimated value Rs. 7,680 Crores). India is currently an importer and is going to remain one even
though the gap between production and consumption is likely to remain almost the same in value terms.
_______________________________________________________________________________________________
Technical Textiles Industry in India: Opportunities and Challenges - iv -

___________________________________________________________________________________________________
Label and badges constituted the largest share of the Indian Clothtech market in 2019-20, followed by the
share of elastic narrow tape.
Geotextiles form the biggest portion of the domestic market of Geotech segment at a share of 37.32% and
Geonets, Geogrids and Geostrips at 25.12% have the second largest share. The consumption (value estimated
at Rs. 2,050 Crores in 2019-20) of Geotech products exceeds the production (estimated value Rs. 1,958
Crores). India is currently an importer and is likely to become a net exporter due to expected higher rate of
increase in production despite increase in consumption over the period of coming five years (till 2024-25).
India’s production of Hometech products has an estimated value of Rs. 13,231 Crores in 2019-20. It is higher
than the consumption which is valued at Rs. 12,352 Crores. This gap is likely to increase which indicates good
opportunities for Hometech producers to address new export markets. Fibrefill (Polyester staple fibre)
comprises the biggest portion of the domestic market and furniture fabrics and other coated fabrics have the
second largest share.
The consumption of Indutech products in India exceeds the production (estimated value at Rs. 11,489 Crores
in 2019-20). India is a net importer of Indutech and is likely to remain so till 2024-25 except that the trade
deficit percentage will be reduced during this period. The highest share of domestic Indutech market in terms
of value is comprised of Glass fabric and it is Coated abrasives that make up the next largest share of the
Indian Indutech market.
Consumption of Meditech products exceeds the production (estimated value for 2019-20 is Rs. 5,891 Crores).
India is a net importer and the gap between production and consumption is expected to increase in the next
five years. Surgical dressings constitute the largest share of the Indian Meditech market in 2019-20, followed
by surgical sutures.
The consumption of Mobiltech products in India exceeds their production (estimated value Rs. 7,669 Crores in
2019-20) and despite the percentage trade gap likely to become smaller, India will continue to remain a net
importer of Mobiltech products for the next five years. However, the rapid expected growth in mobility market
will attract significant capacity addition in India’s domestic Mobiltech industry. Tyre cord fabric is the product
with the largest share of the domestic Mobiltech market in terms of value of technical textile component.
The production of Packtech items in India is valued at Rs. 57,614 Crores in 2019-20 and it is valued at more
than what is consumed (Rs. 50,592 Crores) in India. India is a net exporter of Packtech products as of 2019-
20. The largest share of the domestic Packtech products market comprised Polyolefin woven sacks. The
product category comprising second largest share is Jute, hessian and other sacks.
Current value of production (Rs. 2,850 Crores in 2019-20) of Protech products in India is lower than their
consumption (Rs. 3,148 Crores in 2019-20). At present, India has to import its requirement of Protech items
and even though India will reduce its trade gap significantly, it will continue to remain a net importer of
Protech items till 2024-25. High altitude clothing and Bullet proof jackets constitute the highest market share
product categories.
The value of domestic production of Sportech items in 2019-20 is estimated at Rs. 7,226 Crores which is a
little lower than the value of domestic consumption. However, the deficit is likely to increase in the coming
years due to increase in popularity of sports and games among the youth. The domestic Sportech market is
dominated by the Sports Footwear Components category which make up for more than three-fourths of the
_______________________________________________________________________________________________
Technical Textiles Industry in India: Opportunities and Challenges -v-

___________________________________________________________________________________________________
segment’s share of market. Technical textiles elements in Sports Composites constitute the next large share
of the market.
1.3.2 Leading Countries in Technical Textiles

The world’s leading countries viz. China, USA and Germany account for nearly 60% of the annual output of
technical textiles. A comparison of India vis-à-vis these three leading countries suggests that technical textile
industry in India is likely to grow at a rate of around 7% as compared to growth rates that range from 3.5%
to 5.6% for the three leading countries. China has a fourth of the share of global export market for technical
textiles whereas India has less than 2% of the share. There is a vibrant research and development eco-
system in the three leading countries and perhaps that propels the growth of technical textiles. Trade
promotion through bilateral trade agreements has been prioritised in these countries.
1.3.3 Future demand and trade expectations in Technical Textiles

China, USA and Germany, the three countries are not only leading countries for production and exports of
technical textile but also are its three leading consumers. These three countries put together account for more
than 60 percent of the value of global annual output of technical textiles. China is the largest producer country
and as per the estimates accessed, China accounts for nearly one-third and USA produces one-fourth of the
global production. These two countries also happen to be the two largest consumers of technical textiles. The
exports from Chinese technical textile industry comprise products worth $ 27.3 Billion that make up for over
25 percent of world exports. Indian exports have a small share (1.85 percent) of the world exports market.
Annual rate of growth of Indian technical textile industry has been around 7 percent. It is faster than the
nearly 6 percent growth rate that China’s technical textile industry is clocking annually. A study of the data of
India’s trade in technical textiles (as specified through 449 ITC HS codes that IIT Delhi is suggesting for
adoption) over the last eight years from 2012-13 to 2019-20 reveals that exports have grown for ten out of
eleven segments in the eight-year period from 2012-13 to 2019-20.
India’s technical textiles exports are mainly to USA, Germany and UK with India’s exports to USA comprising
nearly one-fourth of India’s technical textile exports. India’s imports of technical textiles are mainly from
China. South Korea and Germany are also significant supply sources for catering to demand of India’s
technical textiles market. Eight Technical Textiles segments – Packtech, Clothtech, Hometech, Mobiltech,
Protech, Agrotech, Sportech, and Buildtech have witnessed trade surplus during 2019-20. Indutech, Meditech,
and Geotech segments have witnessed deficit during 2019-20.
1.3.4 Attractiveness of Different States for Technical Textile

Manufacturers
Based on the study of economic policies of all the states and union territories of India, there are 17 states that
were identified for having announced policies that contain useful provisions for technical textile enterprises.
Out of these 17 states, Bihar, Kerala, Madhya Pradesh, Odisha, Punjab and Rajasthan do not have a separate,
exclusive textile policy and the provisions of benefits and incentives for textile industry have been mentioned
as part of their respective industrial policies. It is also observed that except for three states viz. Kerala,
Madhya Pradesh and Uttar Pradesh, policies of all other states have made a specific mention of ‘technical
_______________________________________________________________________________________________
Technical Textiles Industry in India: Opportunities and Challenges - vi -

___________________________________________________________________________________________________
textiles’ as a distinct area of attention and focus. Some like Telangana, Tamilnadu, Gujarat and Andhra
Pradesh have gone a step further and made special provisions for technical textiles. In order to gauge the
relative attractiveness of states for technical textiles enterprises, the state policies and incentives of 17
identified states were compared with respect to their respective provisions along specific parameters viz. land
cost and infrastructure related support, provision for capital subsidy, interest subsidy, assistance for
technology upgradation, quality improvement and R&D assistance, power cost support, stamp duty
exemption/reimbursement and employment and employee related support.
The approach adopted for determining the more attractive states of the 17 identified states consisted of a
structured process involving five steps as follows:
1. Excluded relatively less attractive states which offer very low levels of support, incentives and benefits.
Based on the information available, Bihar, Kerala, Punjab and West Bengal got excluded.
2. Eliminated states with low level support in high value heads such as low level support for land and
infrastructure, for capital subsidy, interest subsidy and technology upgradation. Maharashtra and
Uttarakhand were taken out of consideration.
3. Remove the states that impose stiff conditions for availing of high value incentives. Based on this
criterion, Madhya Pradesh was removed from the list of attractive states.
4. Excluded states having poor industrial infrastructure and Jharkhand got eliminated.
5. Determined the relatively attractive states that remained after the previous steps. These were arranged
based on the level of incentives on low value heads. Based on that criterion, Andhra Pradesh,
Telangana, Tamilnadu, Gujarat, Uttar Pradesh, Karnataka and Odisha are more attractive and Rajasthan
and Haryana are relatively less attractive states.
1.3.5 Analysis of Technical Textiles Trade of India

In order to understand the trade (import and export) of technical textile products in India, a list of 449 ITC-HS
codes related to technical textile items were identified through expert opinion. This list includes the 207 HSN
codes notified by the Ministry of Textiles Government of India in 2019. After a careful classification of these
codes into relevant application segments, data was extracted and analysed over the last eight year period
from 2012-13 to 2019-20 to understand the overall trade trends and map the surplus and deficit segments.
The findings reveal that India has been a net exporter (if one was to consider 449 HSN codes as technical
textile items) over the study period.
In the context of 207 HSN codes, India has been a net importer of technical textile items over the study
period with the exception in 2014-2015. The total exports have grown from Rs. 6,338.06 Crores in 2012-13 to
Rs. 14,151.81 Crores in 2019-20 at a CAGR of 12.14%. The imports have grown from Rs. 7,665.58 Crores in
2012-13 to Rs. 14,385.44 Crores in 2019-20 at a CAGR of 9.5%.
If 449 HSN code classification for technical textiles is used as the basis of calculating trade performance then
India has been a net exporter over the study period. In the eight-year period (2013-2020), average exports of
technical textiles were Rs. 61,142 Crores whereas average imports were Rs. 41,410 Crores. Total exports have
seen a growth from Rs. 46,215 Crores to Rs. 72,241 Crores at a CAGR of 7%. During the same period,
imports have grown from Rs. 31,005 Crores to Rs. 51,597 Crores, at a CAGR of 8%.
_______________________________________________________________________________________________
Technical Textiles Industry in India: Opportunities and Challenges - vii -

___________________________________________________________________________________________________
In 2019-20, Mobiltech (29%), Packtech (24%) and Indutech (14%) followed by Hometech (13%) and
Clothtech (13%) contributed the highest share to India’s exports. USA, Germany, UK, Turkey and UAE were
the largest importers contributing nearly 40% to total exports from India. In terms of imports, Mobiltech and
Indutech were the largest segments with around 72% of total import value. The import dependency is on
China, Korea, Germany, USA and Hong Kong.
1.3.6 International Trade of Technical Textiles & India’s contribution

IIT Delhi has suggested that the list of 207 ITC-HS codes currently assigned as technical textiles be expanded
to 449 ITC-HS codes. Trade data of technical textile items under 63 ITC-HS codes (out of proposed 449 ITC-
HS codes) that are widely traded in the global markets have been analysed for documenting trade value in
recent years, identifying dominant countries and assessing India’s status. It is apparent from the analysis that
China is the global leader in the technical textile market and it is followed by USA and Germany.
1.4 Growth and Development Enablers

1.4.1 National and State Policies and Schemes
Many schemes and policies have been introduced by central and state governments in the last few years to
give a fillip to the technical textiles industry. The central government schemes which have been profiled in
detail as part of the present study are as follows:
1. Technology Upgradation Fund Scheme (TUFS)
2. Modified Technology Upgradation Fund Scheme (MTUFS)
3. Amended Technology Upgradation Fund Scheme (ATUFS)
4. iTUFS: Ministry of Textiles has introduced an online portal iTUFS (Integrated Software for Technology
Upgradation Fund Scheme) in 2015, wherein applications for amended TUFS subsidy can be submitted.
5. Scheme for Integrated Textile Parks (SITP)
6. Scheme for Growth and Development of Technical Textiles (SGDTT)
7. Technology Mission for Technical Textiles (TMTT)
8. Scheme for promoting usage of Agrotextiles in Northeast Region
9. Scheme for promoting the usage of Geotechnical textiles in the North East Region
10. Launch of ITC Harmonized System of Nomenclature Code (HSN Code)
11. Focus Product Incentive Scheme (FPIS)
12. National Technical Textiles Mission
13. Concessional custom duty for specific technical textiles machinery
14. Mandatory use of Technical Textiles
_______________________________________________________________________________________________
Technical Textiles Industry in India: Opportunities and Challenges - viii -

___________________________________________________________________________________________________
15. Standardisation of technical textiles
16. Samarth (Scheme for Capacity Building in Textile Sector)
The state government policies whose aims and main provisions have been presented as part of the present
study are as follows:
1. Andhra Pradesh ‘Revised Policy for Textiles and Apparel 2018-23’
2. Bihar Industrial Investment Promotion Policy, 2016 for High Priority Sectors
3. Gujarat State Scheme for Assistance to Strengthen Specific Sectors in the Textile Value Chain (2018-23)
[Extension to Gujarat Textile Policy, 2012]
4. Haryana Textile Policy 2019
5. J&K Start-up Policy 2018
6. Jharkhand Textile, Apparel and Footwear Policy 2016
7. Karnataka Textile and Garment Policy 2019-2024
8. Kerala Industrial & Commercial Policy 2018
9. Madhya Pradesh Industrial Promotion Policy 2014
10. Maharashtra Textile Policy 2018-23
11. Odisha Industrial Policy Resolution 2015
12. Punjab Industrial and Business Development Policy 2017
13. Rajasthan Special Customised Package for Textile Sector enterprises-2013
14. Rajasthan Investment Promotion Scheme 2019
15. Tamilnadu Integrated Textile Policy 2019
16. Telangana Textile and Apparel Incentive Scheme 2017
17. Uttar Pradesh Handloom, Powerloom, Silk, Textile & Garmenting Policy 2017
18. Uttarakhand Mega Textile Policy 2014
19. West Bengal Textile Policy 2013-2018
1.4.2 Formulation of Indian Standards for Technical Textiles

Inadequacy of globally-aligned quality standards and insufficient enforcement of prevalent standards have
been cited as impediments by the stakeholders. The Bureau of Indian Standards (BIS) has published 377
standards for technical textiles. There are 100 new standards that are reported to be under development.
Adequate and globally-aligned standards should be developed expeditiously to help India achieve the growth
targets for technical textiles.
_______________________________________________________________________________________________
Technical Textiles Industry in India: Opportunities and Challenges - ix -

___________________________________________________________________________________________________
1.4.3 Status and contribution of Textile Research Associations (TRAs)

The findings of the primary survey of the TRAs indicate that TRAs are in need of support to enable them to
meaningfully contribute towards enhancement of international competitiveness of Indian textile industry. The
support should be directed towards improving the focus on product and process innovation especially in high
value technical textile products, speciality fibres and raw material (for better durability). It is important for
TRAs to be able to recruit and retain competent technical staff and continuously augment their research and
testing infrastructure.
1.4.4 Status and contribution of Centres of Excellence (COEs)

The information obtained through primary survey of 10 COEs, namely ATIRA, BTRA, DKTE Institute, IJIRA,
MANTRA, NITRA, PSG College, SASMIRA, SITRA and WRA has revealed the pattern of revenue generation of
the COEs in the last six years especially in Composites, Sportech and Meditech segments. It has also been
observed that about 64 percent of the standards that are used in the COEs are international standards. The
use of Indian standards is relatively more for testing Agrotech, Packtech, Geotech and Meditech products. The
knowledge dissemination methods used by COEs are journal publications, research reports and books. COEs
have undertaken many academic research projects (at undergraduate, postgraduate and Ph.D. levels) in the
last six years, especially in Protech and Mobiltech segments.
The survey also revealed that the main challenges being faced by COEs are lack of skilled staff for scientific
research, low consumer awareness of technical textile products, scarcity of funds, lack of uniformity in
processes and standards and lack of international exposure through technical collaborations.
1.4.5 Comparison of practices of Indian COEs and COEs in other

countries
Five premier foreign COEs (CLUTEX, Czech Republic, Composites Research Group, University of
Nottingham, UK, Nonwoven Research and Innovation Institute, UK, Centre for Nanotechnology and Smart
Materials, Portugal and Taiwan Textiles Research Institute, Taiwan) were identified as basis of comparison
of their activities and priorities with the activities and priorities of Indian COEs. It has been noticed that the
premier COEs are working in contemporary areas such as nanotechnology in textiles, multifunctional
textiles, personal protective textiles, biocomposites, composite manufacturing, textile composites, smart
materials and nonwoven materials. The study compares and documents the manner in which the premier
COEs differ from Indian COEs with respect to their focus, ownership, collaboration, and engagements. It is
observed that the outward looking, globally relevant approach of the premier COEs is worth emulating by
Indian COEs.
1.4.6 Technical Textiles Education in India

A primary survey of educational institutions and universities offering degree programmes in textiles in India
was conducted using a semi-structured questionnaire. Analysis of the responses received from 31 institutions
that participated in the survey reveals that even though the textile programmes are offered at B.Tech.,
M.Tech. and Doctoral (Ph.D.) level, these programmes have failed to attract good and motivated students. It
was observed that in a few institutes, ‘technical textiles’ is being offered as an elective (optional) subject.
_______________________________________________________________________________________________
Technical Textiles Industry in India: Opportunities and Challenges -x-

___________________________________________________________________________________________________
None of the institutes offer bouquet of subjects related to technical textiles. The low faculty-student ratio of
1:27 has been observed. It should be a cause of concern and must be addressed. Over the last five years,
there has also been a decline reported in the number of students who pursue technology and engineering
programmes in the field of textiles. The educational institutions have taken up funded/sponsored projects
and supported start-ups in technical textiles during last six years.
The needs reported by the academic institutions are trained faculty and staff, support for introduction of
specialised courses (in areas like High performance and functional fibres, Advanced finishing &
nanotechnology, Fibre-reinforced composites etc.) and facilities, support for enhancement of industry-
academia interaction (projects, internships, placements) and access to resources for increasing in awareness
about the programmes (among prospective students and their parents).
The best practices of the five premier institutes/universities (offering textile engineering and technology
related programmes across the globe) viz. Donghua University (China), Leeds University (UK), North Carolina
State University (USA), RWTH Aachen University (Germany) and Technical University of Liberec (Czech
Republic) have been analysed. It is observed that the premier universities permit their students a high degree
of flexibility in selecting the subjects. The courses are more focused on research and have a large component
of industrial training. These institutes/universities also have innovation centres that foster research, innovation
and awareness. These global universities offer student scholarships and exchange programmes. Their quality
assurance is ensured due to regular, comprehensive performance audit by external auditors and consultants.
1.4.7 Status and Contribution of Focus Incubation Centres and

Integrated Textile Parks
The Ministry of Textiles has set up 11 Focus Incubation Centres (FIC) under the Technology Mission on
Technical Textiles (TMTT) to enable entrepreneurs to receive support for setting up technical textiles ventures
through plug and play model. The primary survey of FICs indicates that the incubation activities are yet to
produce substantive outcomes in most (except DKTE Kolhapur) of the FICs and steps have to be taken to
accelerate incubation activities in the FICs.
The establishment of technical textile focused technology parks has been taken up under Scheme for
Integrated Textile Parks (SITP) by Ministry of Textiles. Five out of 57 sanctioned parks are dedicated to
technical textiles. Information obtained from primary survey indicates that three out of the five technical
textile focused parks are functional. The set of hurdles cited by the functionaries of technology parks were
common to all of them and these have been documented as part of this study.
1.5 Manufacturing and Technology

1.5.1 Primary survey of Technical Textile product manufacturing
firms
A pan-India primary survey of technical textile product manufacturing firms from all the 12 application
segments was conducted using semi-structured questionnaire. A large proportion of the respondent firms
belonged to the MSME category. Many of the respondent firms cater to the needs of global market in addition
to the requirements of domestic market. It was observed that the total revenue of these firms has grown over
_______________________________________________________________________________________________
Technical Textiles Industry in India: Opportunities and Challenges - xi -

___________________________________________________________________________________________________
the reporting period (2017-18 to 2019-20). The findings reveal that private sector enterprises are the major
consumers of technical textile products. In terms of raw material, the main consumption is of polyester, nylon,
polypropylene, cotton etc. There is a high dependence on imports with around 69 percent of respondents
indicating that procurement of raw material is mainly from international markets. China, Taiwan, USA,
Germany are the prominent origin sources and Nylon 66, aramids, caprolactam, fabric, flame retardant
textiles, etc. are the materials that are mainly being imported from these countries.
Nearly two-thirds of the respondent firms reported heavy import dependence for procurement of machines
and equipment installed by them and nearly 60% of their purchases have been sourced from overseas
manufacturers. Machine and equipment suppliers from China, Germany, Taiwan and USA are the major source
of origin of imports. The respondent firms reported exporting products such as fishing nets, hook and loop
tape fasteners and nonwoven geotextiles to the international markets. Based on the sample survey, USA
appears to be the largest consumer of Indian technical textile products, followed by Australia, UK, UAE and
Europe as other major destinations.
In terms of foreign investments and collaborations, foreign investment has largely been made by investors
from Germany, Singapore, Japan, USA and China in the form of FDI, JVs and Strategic Alliances. The
utilisation of foreign investment has been for enhancement of capacity, acquisition of assets and technology
and easing the supply of raw material. The segments that have been able to attract relatively more
investments are Clothtech, Geotech, Hometech, Meditech, Mobiltech and Protech.
The manpower and employment details of the respondent firms revealed that skilled manpower constitutes
nearly half of the total manpower in these firms which may be due to higher technology intensity of the
industry. A gradually increasing trend in employment generation is also evident across all categories viz.
skilled, semi-skilled and unskilled. The respondent firms also conducted several quality related, management
related, operations and technical and soft skills related training programmes for enhancing the productivity
and performance of their employees.
Nearly two thirds of firms are interested in diversifying in other areas of technical textiles due to growing
opportunities that are emerging in the application areas other than they are currently in.
1.5.2 Primary survey of Technical Textile Fibre, filament and

technical yarn manufacturing firms
Most of the surveyed firms reported manufacturing of materials such as polyester staple fibre (including
recycled), Nylon6, HDPE monofilaments, and polypropylene staple fibre, etc. The cumulative production
capacity of the respondent firms has witnessed a marginal growth although the actual reported production
has grown by nearly 6.7% over last three years (from 2017-18 to 2019-20) which indicates an increase in
capacity utilisation. Some of the respondent firms reported exporting to countries including USA, UAE and
Brazil but the majority of their products’ consumption takes place in the domestic market. The respondent
firms source raw materials like polyester granules, polyamide (nylon) 66 granules, Titanium Oxide etc. from
European nations, USA, China, and Korea amongst others. There seems to be a shortage of capacity for high
performance fibres and functional fibres which may be leading to import dependence.
_______________________________________________________________________________________________
Technical Textiles Industry in India: Opportunities and Challenges - xii -

___________________________________________________________________________________________________
1.5.3 Primary survey of Technical Textile machine manufacturing

firms
The core activities reported by the respondent firms are manufacturing of machines, importing them as well
as marketing them. Machine manufacturing for technical textiles is at a limited scale in India. The dependence
on imports from Germany, Japan, China and other countries for high performance machines is quite evident
from the survey.
1.5.4 Contribution of manufacturers’ associations

A survey of manufacturers’ associations was carried out to elicit important information about their respective
industry. Initially, there was a list of 12 such associations that was prepared. Out of these, seven associations
found to be active were approached to obtain their individual responses. Eventually, the responses received
from four of these associations viz. Association of Synthetic Fibre Industry (ASFI), FRP (Fibreglass Reinforced
Plastics) Institute, Indian Textile Accessories and Machinery Manufacturers Association (ITAMMA) and Textile
Machinery Manufacturers Association (TMMA) India have been presented in this report.
The survey was followed up by secondary research about the role and contribution of manufacturers’
associations in technical textiles industry to assess the current level and effectiveness of their activities as well
as document their opinions about various facets of the industry. The information obtained from primary and
secondary research has been presented as a part of this report.
1.5.5 Stakeholders’ Workshops

Seven workshops were conducted with participation of various stakeholders in Indian technical textile
industry; TRAs, CoEs, Academic Institutions, and business leaders from all 12 segments of Indian technical
textile industry. The comments, plans, suggestions offered by the participants have been summarised under
the headings of resource availability, market and marketing, future developments, and impediments to growth
in technical textiles. The main suggestions from these workshops is that there is a critical need to bring end-
user awareness about usage of technical textile products, establish enabling mechanisms for the businesses to
conduct efficient manufacturing of innovative technical textile products, restructure duties imposed on raw
material, intermediate, and final technical textile products. There was a unanimous concern raised about the
lack of standards and a demand from the Government to address this concern. Lack of industry-ready skilled
manpower came across as a major concern and a need to address the same was articulated. A need was felt
for a ‘go-to-portal’ for improving the access to technical textile industry data (size, players, segment wise
opportunity/demand, consumer trends etc.) for businesses, entrepreneurs, and investors.
1.5.6 Emerging technologies and technology trends in Technical

Textiles
The emerging technologies in technical textiles mainly in the field of smart textiles, nonwoven manufacturing
and textile preforms used in composite manufacturing have been analysed. An attempt has been made to
document the research work currently being conducted in the areas of piezoelectric, triboelectric and textile
sensors. New energy harvesting products and technologies have been focused upon alongwith documentation
_______________________________________________________________________________________________
Technical Textiles Industry in India: Opportunities and Challenges - xiii -

___________________________________________________________________________________________________
of important technologies such as hydrospace, vertical lapping and 3D web linker which is used in
manufacturing nonwoven structure. Technologies such as radial braiding, 3D knitting and noobing have also
been documented in the section containing textile preforms as reinforcements for composites. Material and
machines related technology trends have also been documented.
1.5.7 Impediments to growth of India’s Technical Textiles industry

1. Inadequate production of High Performance Fibres
2. Absence of a formal mechanism for regular collection of reliable and comprehensive nation-wide data of
production capacity and enterprise level medium and long-term production plans
3. Lack of entrepreneurship-culture and absence of skill-training for entrepreneurship development in the

area of technical textiles
4. Deficient supplier-manufacturer and customer-connect and lack of fora for enabling their close
collaboration
5. Inadequate number (207) of designated HSN codes for technical textiles
6. Lack of globally-aligned quality standards for technical textiles in India
7. High level of import and export dependence on a limited number of countries
8. Inadequate domestic production capacity of certain products whose consumption potential in India is
high such as smart textiles and high-performance sportswear and swimwear etc.
9. Inadequate production capacity for technical textile machinery and components
10. Indian exports having a small share of international trade
11. Inadequate R&D facilities for technical textiles in the country
12. Relative inability of textile industry to attract and retain talent
13. Low level of adoption of latest technologies such as 3D nonwovens, multiaxial braiding, 3D weaving,
warp knitted spacer etc.
14. Inadequate testing facilities in the country for technical textiles
15. Prevalence of current inverted duty structure
16. Lack of international exposure for stakeholders
17. Slow pace of development of standards and their adoption
18. Delay in strengthening of educational institutes (textile engineering/technology institutes)
19. Delay in strengthening of the Textile Research Associations (TRAs) and Centres of Excellence (COEs)
_______________________________________________________________________________________________
Technical Textiles Industry in India: Opportunities and Challenges - xiv -

___________________________________________________________________________________________________
1.6 Recommendations
I. Short-Term Recommendations
1. Set up an expert-group to recognise and incentivise products that have good potential for
production enhancement across all technical textile segments.
2. Set up a committee to identify those technical textile products for which the domestic market is
steadily increasing and to recommend measures to help boost their production in India.
3. Encourage and financially support the designing and conducting of industry-oriented short-term
courses and programmes to encourage and support entrepreneurship in technical textile industry.
4. Leverage the existing Focus Incubation Centres (FICs) to foster incubation by identifying, analysing
and disseminating successful cases of dissemination.
5. Foster better supplier-manufacturer-customer connect to improve effectiveness of value chain by

supporting establishment of platforms and occasions for frequent interaction: Firstly, a pilot project
must be launched to have a web-based information sharing portal/section hosted on the MoT
website for 3-6 months. Later on, a subscription based model can be considered. Secondly, The
MoT must support formal buyer-supplier meets, workshops etc. through online as well as physical
mode as regular events with pre-declared six monthly/annual schedule.
6. Continuously expand the HSN Code list of technical textiles to keep pace with the development and
emergence of ever newer products in the industry: IIT Delhi has followed a well-defined process
and recommends that this list of 207 HSN codes for technical textiles be expanded to 449 codes
and Government of India must actively consider notifying these 449 HSN codes and segment-wise
classification carried out by IIT Delhi team. MoT must work closely with the Ministry of Commerce
to ensure that the exercise of rationalisation and notification of technical textile codes should be an
on-going one and a mechanism should be created to update even this list of 449 codes
recommended by IIT Delhi regularly.
II. Medium-Term Recommendations
7. Encourage establishment of globally-aligned quality standards and their rapid adoption among all
members of the value chain: MoT must initiate the creation of an empowered group of experts
from among different stakeholder groups and provide Government’s support for this effort. The
MoT, the technical institutions, the research laboratories and the industry associations must work
in close collaboration with BIS on a continuous basis.
8. Support identification and conducting of trade with more partner countries so as to reduce India's
export-import dependence and de-risk operations of technical textiles industry: The de-risking
exercise involves finding and engaging with new export destinations and new sources of imports.
This task must be taken up by MoT in collaboration with different trade bodies as well as Ministry
of Commerce and Ministry Of External Affairs.
_______________________________________________________________________________________________
Technical Textiles Industry in India: Opportunities and Challenges - xv -

___________________________________________________________________________________________________
9. Actively encourage domestic production of high consumption potential items such as high-
performance swimwear and sportswear, smart textiles etc.
10. Actively encourage and financially support indigenous development of technical textile machinery
components by active involvement of polytechnics, engineering colleges and institutes of
technology.
11. Strengthen the educational institutes: Government of India must identify 3-4 textile
engineering/technology institutes from across the country and focus on providing support for
strengthening the technical textile education system and infrastructure for these identified
institutes. Each of these identified institutions can focus and specialise in 2-3 segments of technical
textiles.
12. Establish department/centre of technical textiles in one of the new IITs to function as a hub of
latest knowledge.
13. Support and promote faculty development in the area of technical textiles: MoT and Ministry of
Education must work jointly to promote and support faculty development in the area of technical
textiles.
14. Support development and introduction of new courses pertaining to technical textiles by the
technology and engineering institutes/colleges.
III. Long-Term Recommendations
15. Continuously identify and focus on technical textile products and segments to align the support
with priorities of Atmanirbhar Bharat (Self-reliant India) and expansion of India’s exports.
i. Agrotech: High quality production and expansion of Fishing Nets, Mulch Mats and Crop Covers
should be given special support so that India can increase its exports.
ii. Buildtech: Focus on incentivising production of Architectural Membranes and Acoustic fabric for
import substitution and on Canvas tarpaulin and HDPE Tarpaulin for enhancing India’s exports.
iii. Clothtech: The focus of government’s incentives should be beneficially directed towards
encouraging production of Elastic narrow tape, Hook and loop fastener, Interlining and Zip
fastener tape for import substitution and towards industries producing Labels and Badges and
those producing Specialised and Industrial Sewing thread for enhancing exports from India.
iv. Geotech and Oekotech: It might be better to offer relatively more support to Geomembranes,
Geotextile tubes and Geomats for the export markets. The support should be extended to
upscaling of production of Geotextiles, Geocomposites, Geonets, Geogrids and Geostrips.
v. Hometech: Extend relatively more support to the production of Fibre Fill (Polyester Staple Fibre)
and Carpet Backing Cloth to enhance India’s exports. The support should be extended for
enhancement of production of Plush Fabric for stuffed toys, Ticking Fabric for mattresses and
Filter Fabric to reduce import bill significantly.
_______________________________________________________________________________________________
Technical Textiles Industry in India: Opportunities and Challenges - xvi -

___________________________________________________________________________________________________
vi. Indutech: Greater emphasis needs to be placed on rapid import substitution by backing the
enhancement of textile inputs that go into the making of Cigarette Filter Rods, AGM glass
battery separators, Coated Abrasives, Industrial filtration products, Industrial webbings and
slings and Glass Fabric (as part of Composites). The export opportunities for Belting fabric and
Ropes and cordages need to be exploited.
vii. Meditech: Indian manufacturers have been able to establish their presence in export markets
for Surgical and Non-Surgical masks, gloves, PPE kits and other surgical disposables. Disposable
linens and Surgical dressings are the other two product categories which should be supported
to produce globally acceptable products for export markets. The import reliance on textile
inputs required for sanitary napkins, baby diapers, compression stockings and garments,
surgical sutures and special dressings needs to be reduced by providing incentives and support
to their manufacturers from the government.
viii. Mobiltech: It is suggested that based on the current capabilities of Indian manufacturers, the
export markets for Tyre Cord Fabric and Automotive carpets should be exploited. The
dependence on imports for textile component of Airbags, Helmets and Seat belt webbing should
be reduced by offering support to their indigenous manufacturers.
ix. Packtech: The exports of FIBC (Jumbo) Bags and Leno Bags need to be backed up by
encouraging continuous investment in product improvement for global markets. Jute Hessian
and Synthetic Sacks, Polyolefin Woven Sacks and Treated/ Coated Wrapping Fabric may need
support for meeting domestic consumption needs.
x. Protech: The aim is to ensure that India must not only reduce its dependence on imports but
must also become an exporter of defence products. It is suggested that the units which expand
production of Bullet Proof Jackets, High Visibility Clothing, and Fire retardant apparel should be
given a higher support.
xi. Sportech: The increased focus should be accorded to enhancing the production capabilities of
High Performance Swimwear and Sportswear, Parachute Fabric and Sports Footwear
Components. The need for imports of Technical textiles elements in Sports Composites should
be reduced by removing the bottlenecks.
16. Channelise finances from public and private sources to support upgradation of R&D ecosystem so
as to improve innovation opportunities within India: MoT must provide a dedicated forum for
interaction between the business organisations which are mandated to spend CSR funds annually
and R&D organisations like CoEs, TRAs, FIBCs and engineering and technology institutions. The
aim and therefore design of the forum should be such that it is able to help channelise CSR funds
to R&D institutions.
17. Financially support and incentivise 'Continuous Learning' initiatives in private and government
sectors to attract, nurture and retain the right talent in the technical textile industry from technical
to managerial levels: MoT must support establishment of a credible screening mechanism, invite
applications from such professionals, assess the applications and offer financial assistance.
18. Increase domestic manufacturing of High Performance Fibres such as aramids, UHMWPE, carbon,
Nylon 66 etc.: Multinational Companies who are producers of High Performance Fibres should be
_______________________________________________________________________________________________
Technical Textiles Industry in India: Opportunities and Challenges - xvii -

___________________________________________________________________________________________________
identified and invited to invest in establishing production facilities in India through any of the
alternative investment routes.
19. Encourage adoption and penetration of new technologies for a sustainable future: Industry experts
suggest that MoT must consider directing the prevailing Technology Upgradation Fund Scheme
(TUFS) towards certain identified modern technologies such as those related to 3D nonwovens,
multiaxial braiding, 3D weaving, warp knitted spacer etc.
20. Encourage domestic production of Smart textiles and electronic textiles: Ministry of Textiles,
Ministry of Electronics and Information Technology and Ministry of Science and Technology must
work collaboratively and support interdisciplinary application research and product development
projects in the field of smart and electronic textiles.
21. Establish adequate testing facilities: MoT must take steps to support organisations to establish
dedicated test centres for exclusive testing of technical textile material and products with proper
infrastructure and a trained workforce.
22. Launch increased efforts to change the current inverted duty structure: The Ministry of Textiles
must intensify its efforts with the Ministry of Finance to rationalise the duty structure and remove
the duty inversion.
23. Support and facilitate international exposure: The Ministry of Textiles must consider enhancing its
existing level of support to finance participation in trade shows, exhibitions, workshops,
conferences.
24. Expedite the process of development of standards and their adoption: MoT must facilitate the
collaborative working of all stakeholders to promote the formulation and adoption of the new
standards.
25. Attract and retain talent in the TRAs by bringing the terms of appointment of scientific staff at par
with those of DST and CSIR staff.
26. Augment the research infrastructure of the TRAs: it is suggested that MoT facilitates an advisory
group that must periodically review the global developments in the field of technical textiles and
the research and testing infrastructure in TRAs should be augmented based on the periodic
suggestions of the advisory group.
27. Strengthen the COEs: It is suggested that MoT must support and encourage collaboration among
Indian CoEs and well-reputed overseas COEs as well as industries. Further, the geographical
concentration of COEs in western India needs to be remedied so that the industry has easy access
to adequate testing facilities in relatively close proximity.
_______________________________________________________________________________________________
Technical Textiles Industry in India: Opportunities and Challenges - xviii -

2. Background and
Context to the Study
The textile industry is one of the oldest and largest industries in India. It contributed 2.3% to India’s GDP and
generated 45 million jobs in 2018-19. The industry is expected to grow at a CAGR of 12% to reach US$ 220
billion by 2025-26.
Technical textiles industry is an emerging and important part of the textile industry. It is expected to reach a
size of US$ 28 billion in FY 24-25, increasing at a CAGR of 8.25% over FY19-20. It contributes ~0.7% to India’s
GDP and accounts for ~13% of India’s total textile and apparel market. India is expected to be a key market
characterised by growing consumption due to cost-effectiveness, durability and versatility of technical textiles.
It is in this context that the Ministry of Textiles (MoT), Government of India (GoI) along with IIT Delhi has
conducted the present study to document and analyse the opportunities and challenges in this ‘high potential’
part of the Indian textile industry.
The report of the study that has been conducted through the pandemic in the year 2020 and first half of
2021, is organised as follows – The first section deconstructs the objectives of the study, and the second
section details the data collection processes and methodology of the study.
2.1 Objectives of the study

IIT Delhi, on behalf of the Ministry of Textiles, Government of India conducted a comprehensive study of the
Indian technical textiles industry in terms of the current market landscape, growth areas, opportunities and
challenges. The present report meets the objectives of documenting and analysing the opportunities and
challenges of the Indian technical textile industry. The contents of the report are summarised below.
2.1.1 Technical Textile Market Analysis

The present report contains a section in which analysis of the domestic and international technical textiles
market has been presented. The components of the analysis are as follows:
i. Domestic Market Analysis: The size of the domestic market has been estimated for technical
textile industry as a whole, as well as for each of the segments. Information has also been presented
for key products, production and consumption trends, and market size for individual products for the
period starting from financial year 2019-2020 to 2024-2025.
ii. International Market Analysis: A comparison between the size of Indian technical textiles market
and world market for technical textiles has been carried out. The comparative analysis has been
presented on an aggregate basis as well as on product-basis for products that have been identified by
_______________________________________________________________________________________________
Technical Textiles Industry in India: Opportunities and Challenges -1-

Section 2: Background and Context to the Study
___________________________________________________________________________________________________
the study team for their high potential for Indian industry. A section has been devoted to comparative
analysis between India and three leading countries in technical textiles viz. China, USA and Germany
regarding their relative strengths, performance characteristics and support mechanisms for the
technical textile industry.
iii. International Trade Analysis: A view of global trade of some key technical textile products along
with the countries that are their main exporters has been presented with the help of data and
information of last three years (2018-2020). IIT Delhi has proposed 449 ITC-HS codes for technical
textiles as an improvement over the existing scheme of 207 codes. Data of exports and imports of last
eight years (2012-13 to 2019-20) for these products (conforming to 449 ITC-HS codes) has been
presented along with the data based on 207 ITC-HS code classification (as used by the Government of
India at present) for the use of analysts and decision makers. This analysis reveals the identity of
those products and technical textiles segments in which India has a Y-o-Y trade surplus as well as
those in which India has a Y-o-Y trade deficit.
iv. Research and Development eco-system: As part of the present study, the research and
development ecosystem of Indian technical textile industry has been documented in detail. The study
team has interacted with personnel working in TRAs, COEs, BIS and Academic Institutions offering
textile related programmes. In course of these interactions, the study team has gathered information
about projects undertaken, testing facilities, latest technologies, research conducted, patents filed,
standards followed and other aspects of research ecosystem. Textile COEs from other countries have
been identified, some of their practices have been documented and this analysis has been presented
in the report.
v. Emerging technologies: Emerging technologies in technical textiles have been identified,

documented and included in the report so that information about those is made available to
entrepreneurs, researchers and policy makers for enabling better, well-informed decisions.
vi. Investments in technical textiles industry: Domestic and foreign investments that have been
made in technical textiles industry of India in the recent years have been accessed through reports in
the mass media. The purpose and nature of these investments, the identity of investors and countries
of origin of these investments have been documented and presented in the report.
vii. Profiling of major firms of Indian Technical Textile Industry: Profiling of major manufacturers
of technical textiles has been carried out to contribute to a better understanding of the different ways
in which large enterprises in Indian technical textile industry are configured.
viii. National and State Policies and Schemes: The relevant information about the policies and
schemes initiated and being implemented by central and state governments for facilitating growth and
development of the Indian technical textile industry have been presented in the report in a specially
curated section.
ix. Focus Incubation Centres: The study documents the current status and contribution of those
Focus Incubation Centres (FICs) whose establishment has been approved by the Ministry of Textiles,
Government of India.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
x. Technology parks: The current status and contribution of Technology Parks which have been
approved for setting up technical textiles units has been documented in a specially assigned section of
the report.
xi. Employment potential of Technical Textiles: The data of employment envisaged from current
Government schemes has been compiled and analysed for assessment of employment potential of
investments planned and expected in Indian technical textile industry in future.
xii. Technical textiles education: The report contains detailed information about technical textile
education that is being imparted in Indian academic institutions and universities which offer degree
programmes. A primary survey of such institutions has been conducted and the survey data analysed
to know about the courses and programmes being offered, student and faculty strength, research
conducted, projects undertaken, challenges faced, and methods to overcome them. A study of five
premier foreign universities that offer education related to technical textiles has also been carried out
to understand some of their unique practices which contribute towards excellence in education.
2.1.2 Resource Availability

The availability of resources such as raw materials, manufacturing technology and machinery, manpower
(skilled and unskilled), research and development facilities, testing facilities, etc. has been analysed based on
primary data obtained from various stakeholders as well as from secondary sources. List of important raw
material and fibres being imported by various companies has been prepared. In addition to that, the
information about machines being imported and the countries of their origin has been obtained through
primary survey of technical textile manufacturing companies.
2.1.3 Future of Technical Textiles

Based on the analysis of the data that has been collected about various aspects of technical textiles market,
the forecast about the future of each of the application segments have been arrived at. Yearly growth rates
and market size have been forecast for important technical textiles products for the period till 2024-25.
2.1.4 Impediments to growth of India’s Technical Textiles industry

The information obtained from various sources during the course of this study has been analysed and based
on that analysis, impediments to the growth of India’s technical textiles industry have been identified. The
impediments so identified pertain to government policies, taxes and duties, uncertainty in demand, inadequate
information about the export & domestic market, non-availability of raw materials and machinery, inadequate
testing facilities, inadequate coating and lamination facilities, non-availability of skilled and qualified
workforce/ personnel, quality not meeting the international standards etc.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
2.1.5 Recommendations
The identification of impediments makes it imperative to suggest actionable recommendations for Ministry of
Textiles, Government of India so that these can help in facilitating the growth and development of technical
textiles industry in India. The set of recommendations have been presented distinctively in the report.
2.1.6 Comprehensive information about industry’s stakeholders

There has been a paucity of reliable information about stakeholders of technical textile industry in India. As
part of this study, for the first time ever, reliable, updated, detailed information about various stakeholders of
the industry has been presented in a systematic manner. Comprehensive directories of the following
stakeholders have been compiled and are included as annexures to the report so as to serve as a document of
reference for users of this report:
1. Annexure 15: Directory of Textile Research Associations in India
2. Annexure 24: Directory of Centres of Excellence for Technical Textiles in India
3. Annexure 28: Directory of Academic Institutions offering Undergraduate and Postgraduate education
in Textile Engineering and Technology
4. Annexure 29: Directory of Institutes offering textile relevant Diploma Courses
5. Annexure 30: Directory of Focus Incubation Centres for Technical Textiles
6. Annexure 31: Directory of Technology Parks for Technical Textiles
7. Annexure 32: List of enterprises that participated in the survey conducted by IIT Delhi
8. Annexure 33: Directory of important Manufacturers’ Associations
9. Annexure 36: Profiles of Key Technical Textile Firms in India
_______________________________________________________________________________________________

___________________________________________________________________________________________________
2.2 Data and Methodology

2.2.1 Data collection and management
Data for the present study was collected from primary as well as secondary sources. The details of data
sources, data collection methods, sampling, documenting, organising, analysis and other relevant aspects are
highlighted below.
Primary Data: Collection and analysis
Multiple tools were used for collection of primary data:
• Semi-Structured questionnaires: Respondent-category specific, detailed, semi-structured

questionnaires entailing close- ended and open-ended questions were used to capture quantitative
and qualitative information about technical textile industry that was shared by various stakeholders
during the survey.
• Stakeholders’ workshops: Seven workshops of experts, each with a specific focus, were
conducted. Views and opinions of expert participants were first recorded and then analysed.
The primary data has been gathered from relevant personnel who belonged to various organisations viz.
product manufacturers, raw material manufacturers, machine manufacturers/suppliers, textile research
associations, centres of excellence, academic institutions, policy-making institutions, apex industry
associations, focus incubation centres and textile technology parks. The features of primary data collection
process are explained below.
1. Questionnaire survey instrument used for the survey
Questionnaires were developed on the basis of objectives of the study and inputs received from the domain
experts and MoT for each of the stakeholder groups. The Questionnaire based survey instruments were then
administered to the following stakeholders:
1. Technical Textile Product manufacturing companies
2. Raw material manufacturing companies
3. Machine manufacturing companies
4. Bureau of Indian Standards (BIS)
5. Textile Research Associations
6. Centres of Excellence
7. Academic Institutions
8. Focus Incubation Centres
9. Manufacturers’ Associations
10. Textile Technology Parks
_______________________________________________________________________________________________

___________________________________________________________________________________________________
The questionnaires which were administered to manufacturing enterprises consisted of questions that sought
responses about products being manufactured, manufacturing capacity, imports, exports, machines used, raw
material, employees, expertise, financial status, business performance, opinions and suggestions. Data and
information was collected for years 2015 to 2019 (extending to 2020 wherever possible).
Purposive sampling technique, which is a non-probability sampling method, was used for product
manufacturing firms so as to ensure appropriate representation of product manufacturers from each
segment of technical textiles. Since the number of raw material and machine manufacturers were small, help
of experts was sought to identify sample firms from among them and the firms so identified were
approached during the survey.
A survey agency was hired by IIT Delhi for collection of data from manufacturing firms (product, raw
material and machine manufacturing firms). As for the stakeholders other than the manufacturers, primary
data and information has been collected directly by members of IIT Delhi who were specially deployed for
this purpose. The primary data collection faced a number of challenges because it was carried out during the
Covid-19 pandemic.
Stakeholders’ Workshops
Seven workshops with experts were conducted by IIT Delhi. It was ensured that each of the workshops had a
distinct and clear focus in terms of segment/category of organisations participating in that particular
workshop. All the workshops were conducted in virtual mode due to restrictions on physical gathering due to
Covid-19 pandemic. IIT Delhi team engaged with TRAs, COEs, academic institutions, apex industry
associations & institutions and product manufacturing firms from all segments of technical textiles. The
discussions during the workshops were aimed at identifying emerging areas for product innovation, production
and export capacities, gaps in resource availability, extent of access to technology and skills, facilitators and
impediments to growth and policy-related suggestions by the participant for the Government.
Secondary Data: Sources and analysis
Data and information available in the published documents of Ministry of Textiles, Government of India, ITTA,
FICCI, EXIM Bank of India, Invest India, KPMG and several national and global market research agencies was
accessed for estimating product-wise market size and growth rates.
World Integrated Trade Solutions, World Bank (WITS), UN Comtrade, and ITC Trade Map were referred for
analysing International Trade of Technical Textiles & India’s contribution with respect to important products.
Analysis of technical textiles trade of India for the period 2012-2013 to 2019-2020 was carried out by
extracting data from the website of Ministry of Commerce, Government of India.
Business profiling of more than 100 companies from technical textile industry has been done by using data
from their annual reports, CMIE Prowess dx© database and Tofler Database.
Other sources for obtaining secondary data and information are websites of Ministry of Textiles, individual
companies, various academic institutions (Indian and foreign), ITTA, different TRAs, all the COEs, BIS, Invest
India, Focus Incubation Centres and Textile Technology Parks. Information from technical reports and
_______________________________________________________________________________________________

___________________________________________________________________________________________________
research papers from academic journals and associations have also been accessed. A detailed list of all
secondary sources is provided in the Annexures.
2.2.2 Methods used for analysing the data

A mixed-method approach has been used to analyse the data. The qualitative data collected through
questionnaires and workshop proceedings was cleaned before being analysed. Cleaning of the data involved
cohesive collation and parsing of all the data collected. Qualitative analysis techniques were used to construe,
describe and understand the data. Industry relevant analytical methods like Porter’s five forces model have
been used. The major companies for case analysis were identified using Delphi technique.
The quantitative data was similarly cleaned and assessed. Numerous checks were performed to identify and
eliminate errors. The methods encompass descriptive and summary statistics with tabulated data,
diagrammatic and graphical representation of information, trend analysis, growth movement through
cumulative average growth rates, (CAGR), factor analysis, etc., to generate meaningful insights. The data has
been normalized to remove disproportionate effect of any outliers.
2.2.3 Workflow
The workflow process followed for primary data collection is shown in the figure below:
Figure 2.1: Process for primary data collection
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Related to Secondary data:
The workflow process followed for secondary data collection is shown in the figure below:
Figure 2.2: Process for secondary data collection
2.2.4 Limitations of the study

Although best efforts were made in collecting, collating, analysing, and presenting the information in this
report, there are some limitations of the study which are as follows:
1. IIT Delhi is suggesting 449 HSN Indian codes as technical textile products. The composition of these
codes has been arrived at after careful examination of previously identified codes from Baseline report
(2016), 207 ITC HS Codes notified by Ministry of Textiles in December 2020 and the codes mentioned
in Exim Bank Report (2018). These were discussed and screened by domain experts who categorised
these into segments. All the analysis that is related to imports and exports of technical textiles
pertains to 449 codes.
2. Best efforts were made to obtain responses from as many firms and stakeholders as possible for the
survey that was rolled out during the pandemic period. As the participation in this study was
completely voluntary, therefore the results based on analysis of primary data are limited only to those
stakeholders and companies who consented to submit their responses.
3. The period for primary and secondary data is collated till FY 2020.
_______________________________________________________________________________________________

3. Introduction to
Technical Textiles in India
3.1 Definition of Technical Textiles
Technical or engineered textiles are defined as products, materials, and fibres that are used for their
functional use rather than for aesthetic purposes. Technical textiles have varied applications in several vital
industries including aerospace, packaging, hazard protection, shipping, sports, agriculture, defence,
healthcare, construction, etc.
3.2 Segments of Technical Textiles

Technical textiles industry is broad-based, and its output is categorised into 12 application segments viz.
Agrotech, Buildtech, Clothtech, Geotech, Hometech, Indutech, Meditech, Mobiltech, Oekotech, Packtech,
Protech, and Sportech. A brief description of each of these is presented below:
i. Agriculture, Horticulture, Fisheries, and Forestry Textiles (Agrotech): The Agrotech segment
includes textile products used in agriculture, horticulture (including floriculture), fisheries, animal
husbandry, forestry and other allied activities. Agrotech products help in production and protection of
crops and other related produce from livestock and marine life.
ii. Architectural and Constructional Textiles (Buildtech): Buildtech consists of those textile
products which have application in building and construction industry. Buildtech products include
architectural membranes, tarpaulins (canvas & HDPE), awnings and canopies, scaffolding nets, wall
coverings and acoustic fabric.
iii. Clothing Textiles (Clothtech): Clothtech segment comprises textile material and products
manufactured to fulfil functional requirements of clothing, garments, and footwear industry.
Shoelaces, interlinings, zip fasteners, elastic fabric, garments and umbrella cloth are some of the
major products that are included in this segment.
iv. Geotextiles (Geotech): These materials are permeable and have been designed for uses such as
soil reinforcement, separation, filtration, drainage and erosion control. Products in Geotech segment
are used in nonwoven, woven and knitted forms in roads, railway tracks, embankments, waterworks
etc. Major products in this segment are Geogrids, Geonets, and Geocomposites.
_______________________________________________________________________________________________

Section 3: Introduction to Technical Textiles in India
___________________________________________________________________________________________________
v. Household Textiles (Hometech): Technical components of furniture, household textiles, and floor
coverings, etc., are categorised as Hometech. Other major products in Hometech segment include
fibrefill, mattress & pillow components, carpet backing cloth, stuffed toys and blinds.
vi. Industrial textiles (Indutech): Textile products which are designed for filtration, conveying,
purification of products and other industrial uses are classified under Indutech segment. Therefore,
Indutech includes filters, conveyor belts, drive belts, bolting cloth, computer printer ribbons and
paper-making fabrics.
vii. Medical and Hygiene Textiles (Meditech): Meditech segment consists of textile material used for
healthcare and hygiene applications. This segment includes products like diapers, sanitary napkins,
surgical products, artificial implants, masks, PPE kits and surgical gowns.
viii. Transportation Textiles (Mobiltech): Mobiltech segment includes textile products that are used
for applications in automotive components of terrestrial vehicles of various kinds, railways, airplanes,
boats and ships, satellites and space crafts. The main products of Mobiltech segment are seat belt
webbings, airbags, helmets, seat upholstery, airline disposables and nylon tyre cords.
ix. Environment Protection Textiles (Oekotech): Textile products that are used for applications
related to environmental protection are categorised as Oekotech products. Oekotech products are
used in erosion control, air and water purification, waste recycling and treatment.
x. Packaging Textiles (Packtech): This segment consists of products manufactured for applications
in packaging of industrial products and food products.
xi. Protection and Safety Textiles (Protech): Products of Protech segment are used for their
functional performance in the areas of protection of personnel and physical assets. The main user
groups are those associated with external security duties (defence), fire control services, police, para-
military forces as well as residential and industrial security.
xii. Sport and Recreation Textiles (Sportech): High-performance textile materials used for
sportswear and sports equipment are categorised in this category. Some sportech products are
artificial turfs, sports nets, fishing rods, balloon fabrics, parachutes fabrics, hockey sticks, racquets
and sail cloths.
3.3 Indian Technical Textiles Industry

The size of Indian technical textiles industry is estimated at US$ 18.89 Billion in FY 2091-20, and it is
approximately 8.7% of US$ 217.81 Billion global technical textiles market. The penetration level of technical
textiles is relatively lower in India at 5-10% as compared to 30-70% in developed countries. Government of
India has launched National Technical Textiles Mission with a financial outlay of Rs. 1,480 Crores with the aim
of positioning India as a global leader in Technical Textiles. Its implementation period will be for four years
(from FY 2020-21 to 2023-24). The Mission will facilitate market development, market promotion,
international technical collaborations, investment promotions and ‘Make in India’ initiatives. The aim of the
_______________________________________________________________________________________________
Technical Textiles Industry in India: Opportunities and Challenges - 10 -

___________________________________________________________________________________________________
mission is to grow the domestic market at the rate of 15-20 percent per annum and take the market size to
US$ 40-50 Billion by the year 2024. The mission also aims at increasing the exports of technical textiles from
current annual value of approximately Rs. 14,000 Crores to Rs. 20,000 Crores by 2021-22. It also targets to
maintain an average annual growth of 10 percent in exports till 2023-24.1
3.4 Industry’s response to Coronavirus

pandemic
The outbreak of Coronavirus (termed as COVID-19) pandemic towards the end of December 2019 posed a
huge challenge to the entire world. World Health Organisation (WHO) declared the outbreak a global health
emergency on 30th January 2020 and a Global Pandemic on 11 March 2020. Meanwhile, Government of India
responded with alacrity and activated an emergency response to face the challenge and contribute towards
minimising its impact. There emerged a pressing need for Body Coveralls, a part of Personal Protection
Equipment (PPE), which are specialised protective suits meant for providing high level of protection to the
health professionals dealing with COVID-19 patients.
Prior to March 2020, Body Coveralls suitable for COVID-19 (classified as class-3 exposure level under ISO
16003 Standard) were not manufactured in India and the country had to depend on imports from China, USA
and Europe. The requirement of such Coveralls was less than 50,000 per year and the strict quality
requirements for these were prescribed by the Ministry of Health & Family Welfare, Government of India. Due
to disruption in imports because of outbreak induced movement restrictions in China, Ministry of Health &
Family Welfare (MoH&FW) approached Ministry of Textiles in the last week of January 2020 seeking support
to develop domestic sources of supply of PPEs (Body Coveralls and N-95 masks) so that Indian health
professionals could use them as protection while combating COVID-19 pandemic.
Ministry of Textiles and Ministry of Health & Family Welfare launched Outreach programmes and invited fabric
and garment manufacturers to explore possibilities of developing suitable products and establishing production
capacity on war footing. Active collaboration of Government with Indian Technical Textiles industry started
from 30th January 2020. Industry associations and several manufacturers of all categories were engaged in
this endeavour. MoH&FW finalised technical specifications for Body Coveralls on 2nd March 2020.
The technical requirement was for the Coveralls to pass ISO 16003 Class-3 exposure pressure (Synthetic
Blood Penetration Resistance Test). Initially, there was only one laboratory (SITRA, Coimbatore) which had
the testing facility for conducting Synthetic Blood Penetration Test. DRDO set up a test facility at its laboratory
in Delhi (INMAS) in the first week of April 2020. Due to the concerted efforts of the Ministry since then, there
are 11 laboratories which are now engaged in conducting tests on PPE Coveralls as well as on fabrics.
Until March 2020, only two fabric manufacturers and four garment manufacturers had qualified from tests
carried out at SITRA. Ministry of Textiles held a series of stakeholders’ consultations, and several domestic
1 Annual Report 2020-21, Ministry of Textiles, Government of India
_______________________________________________________________________________________________

___________________________________________________________________________________________________
hosiery and apparel manufactures were persuaded to take up the manufacturing of PPEs. These sustained
efforts led to 106 indigenous units establishing manufacturing capacities for Coveralls by April 2020. The
actual production of Body Coveralls shot to more than 4.5 lakh units per day by mid-May 2020. Within a
period of just two months, a new industry, worth US$ 1 billion or Rs. 7,000 Crores with nearly 1,100
manufacturers certified by 11 approved laboratories has been created with unprecedented promptness.
India has so far produced more than 6 crore PPE Coveralls and exported 2 crore sets to USA, Europe, Middle
East and Africa, Australia, and a few other countries. India has also produced more than 15 crore N-95
Masks and has exported 4 crore masks by November 2020. There are more than 200 certified manufacturers
of N-95 masks who have a production capacity of 32 lakh pieces per day. India is the second largest
producer of Personal Protection Equipment in the world and has enough surplus production to meet export
demands too. India has converted the crisis into an opportunity and has emerged as a global leader in
manufacture of PPE, giving a boost to the ‘Make in India’ programme and continuing its march towards
creation of ‘Atmanirbhar Bharat’.
_______________________________________________________________________________________________

4. Exhaustive List of
Technical Textile Products
Technical textile industry is in its nascent stage but is evolving at a fast pace. As a result of this rapid growth,
the industry is undergoing a large number of changes in a short span of time. One such change is in the
product portfolio of what constitutes technical textiles. Constant product innovation results in addition of new
products to the existing pool of technical textile products.
In order to ensure that the stakeholders are better informed, an effort has been made to compile an
exhaustive list of technical textile products under 12 different segments. This effort has relied on expert
opinion and secondary research which has been followed by rationalisation and removal of duplication.
Segment-wise list of products is presented below. Information on whether the respective product is
manufactured and consumed in India, imported into and exported from India is also presented against each of
the products.
4.1 Agrotech Products
Manufactured Consumed in Imported into Exported from

Product
in India India India India
1 Anti Bird Nets Y Y N Y
2 Anti Hail Nets Y Y Y Y
3 Anti-Insect Nets Y Y Y Y
4 Crop Covers Y Y N Y
5 Crop Support Nets Y Y N Y
6 Dole Nets Y Y N Y
7 Fishnet Twines Y Y N Y
8 Fruit Protection Covers Y Y N N
9 Gill Nets Y Y Y N
10 Ground cover Fabric Y Y N Y
11 Harvesting Nets Y Y N Y
12 Jute Soil Savers Y Y N Y
13 Mulch Mats Y Y N Y
_______________________________________________________________________________________________

Section 4: Exhaustive list of Technical Textile products
___________________________________________________________________________________________________
Nylon Monofilament
14 Y Y Y Y
Fishing Nets
Nylon Multifilament
15 Y Y y Y
Fishing Nets
16 Pelagic Nets Y Y N N
17 Purse Seine Nets Y Y N Y
18 Root Ball Nets Y Y N Y
19 Seed production Cages Y Y N N
20 Shade Nets Y Y N Y
21 Staking Cords Y Y Y Y
22 Trawls (Trawl Nets) Y Y Y Y
23 Turf Protection Nets Y Y N N
24 Vermi Beds Y Y Y Y
4.2 Buildtech Products

Product
1 Acoustic Fabrics Y Y Y Y
Architectural
2 Y Y Y Y
Membranes
3 Auditorium Fabrics Y Y Y Y
Awnings and Canopies
4 Y Y Y Y
Fabrics
5 Canvas Tarpaulins Y Y N Y
6 Coir Blinds/ Awnings Y Y N Y
Fabric Formwork for
7 Y Y N N
Concrete
Flex material for
8 hoardings and Y Y Y Y
advertisements
9 HDPE Tarpaulins Y Y Y Y
10 Jute Tarpaulins Y Y N Y
11 LDPE Sheets Y Y N Y
12 Lifting Slings Y Y Y Y
Polyester Harnesses
13 Y Y Y N
Belts
14 PP Tarpaulins Y Y N Y
15 PVC Coated Tarpaulins Y Y N Y
16 PVC Laminated Flex Y Y Y Y
_______________________________________________________________________________________________

___________________________________________________________________________________________________
17 Scaffolding Safety Nets Y Y Y N

18 Shelter Fabrics Y Y Y Y
19 Tents Y Y Y Y
4.3 Clothtech Products

Product
Cloth Labels, Cloth
1 Y Y Y Y
Badges
2 Coated Fabrics Y Y Y Y
3 Coated Interlinings Y Y N N
4 Cotton Sewing Threads Y Y Y Y
5 Elastic Narrow Fabrics Y Y Y Y
6 Embroidery Backings Y Y Y Y
7 Functional Yarns Y Y Y Y
8 Garment Elastic Tapes Y Y Y Y
Hook and Loop
9 Y Y Y Y
Fasteners
Industrial Sewing
10 Y Y Y Y
Threads
11 Institutional Uniforms Y Y N Y
Interlining for Apparels
including Over the
12 Y Y Y Y
Back (OTB) for
embroidery
13 Interlinings for Coats Y Y N Y
14 Laces and Tapes Y Y Y Y
15 Military Fabrics Y Y Y Y
16 Nylon Taffeta Y Y Y N
Panty Hose, Tights,
17 Stockings, Socks and Y Y Y Y
Other Hosiery
18 Rayon Taffeta Y Y Y Y
19 Shoe Linings Y Y Y Y
Tactical Vests for
20 Y Y Y Y
Military use
21 Textured Yarn Y Y Y Y
22 Tulles Y Y Y Y
23 Velcro Y Y Y Y
24 Wadding Y Y Y Y
25 Zip Fasteners Y Y Y Y
_______________________________________________________________________________________________

___________________________________________________________________________________________________
4.4 Geotech Products

Product
Extruded Polypropylene
1 Y Y Y Y
Geogrid
2 Gabions Y Y Y Y
3 Geo Composites Y Y Y Y
4 Geo fabrics Y Y Y Y
5 Geobags Y Y Y Y
6 Geocells Y Y Y Y
7 Geogrids Y Y Y Y
8 Geomembranes Y Y Y Y
Geotextiles for Road
9 Y Y N N
Construction
Geotextiles 100 csm-
10 Y Y Y Y
724 gsm
High Strength
11 Y Y Y Y
Polyester
Nonwoven, Needle
12 Y Y Y Y
punch felt for Geobags
PET Geogrids and
14 Y Y Y Y
HDPE Geocells
Polymer and Steel
15 Gabions for Shore Y Y Y Y
Protection
PP Woven Fabrics with
16 Y Y Y Y
different GSM & Colour
Prefabricated Vertical
17 Y Y Y Y
Drains
4.5 Hometech Products

Product
Acrylic Floor Covering
1 N Y Y N
Yarns
Bed Linen, Table Linen,
2 Toilet Linen and Y Y Y Y
Kitchen Linen
3 Blackout Curtains Y Y N Y
4 Blinds Y Y N Y
5 Carpet and Textile Y Y Y Y
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Floor Coverings
(including Textile
Backing Cloth)
6 Cloth Napkins Y Y Y Y
7 Coir Mats Y Y N Y
8 Comforters Y Y Y Y
9 Curtains Y Y Y Y
Cushions, Comforters
10 Y Y Y Y
and Quilts
Dry Wipes & Kitchen
11 Y Y Y Y
Wipes
12 Fabric Tapes Y Y N Y
13 Faux Leather Y Y Y Y
Filter Fabrics (HVAC
14 Y Y Y Y
and Vacuum Cleaner)
15 Flock Coated Fabric Y Y Y N
16 Hollow Fibre Pillows Y Y Y Y
Jute Carpet Backing
17 Y Y Y Y
cloth
Laminated Mattress
18 Y Y Y Y
Protectors
19 Linoleum Y Y Y N
20 Mattress Pads Y Y N Y
21 Mosquito Nets Y Y Y Y
22 Needle Punch Carpets Y Y Y Y
Nonwoven Thermal
23 Y Y Y Y
Bonded Waddings
Nonwoven Wipes for
24 Y Y Y Y
home use
25 Painting Canvas Y Y Y Y
26 Pillow Covers Y Y N Y
PP Air Conditioner
27 Y Y N Y
Filter Cloth
28 Quilts Y Y Y Y
29 Refreshing Wipes Y Y Y Y
30 Refreshment Wipes Y Y Y Y
31 Stuffed Toys Y Y Y Y
32 Ticking Fabrics Y Y Y Y
Woven Pile Fabrics and
33 Y Y N Y
Chenille Fabrics
_______________________________________________________________________________________________

___________________________________________________________________________________________________
4.6 Indutech Products

Product
1 Abrasive Cloth Y Y Y Y
Acoustic Insulation
2 Y Y Y N
Fabric
Advanced Composites
3 Y Y Y N
for Oil and Gas
AGM Glass Battery
4 Y Y Y N
Separators
5 Bolting Cloth Y Y Y Y
Computer Printer
6 Y Y Y Y
Ribbons
Conveyor Belting
7 Y Y Y Y
Fabrics
8 Decatising Cloth Y N N Y
9 Drive Belts Y Y Y Y
High-performance
10 Y Y Y Y
Ropes and Cordages
11 HVAC Filter Cloth Y Y Y Y
12 Industrial Filter Fabrics Y Y Y Y
13 Industrial Hoses Y Y Y Y
14 Industrial Tapes Y Y Y Y
Industrial Webbings
15 Y Y Y Y
and Slings
16 Industrial Wipes Y Y Y Y
Laminated Nonwoven
17 Y Y Y Y
Filters
18 Liquid Filter Fabrics Y Y N Y
19 Meta Aramid Fibres N Y Y N
20 Nonwoven Jute Felts Y Y N Y
21 Nylon Ropes Y Y N Y
22 OPAN Fibre (Pyromex) Y Y Y Y
23 Paper Making Fabrics Y Y N Y
24 Peel Ply Fabrics Y Y Y Y
Polyamide Nylon
25 Y Y Y Y
Monofilament Yarns
Polyester Industrial
26 Y Y Y Y
Yarns
27 Printed Circuit Boards Y Y Y Y
28 Ropes and Cordages Y Y Y Y
29 Speaker Fabrics Y Y Y N
30 Tape Fabrics (Nylon Y Y Y Y

Curing, Electric Cable,
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Nuclear Plant Pipes)

31 Twines Y Y Y Y
Typewriter Ribbon
32 Y Y N Y
Cloth
33 Water and Oil Filters Y Y Y Y
Water Repellent
34 Y Y Y Y
Canvas
35 Waterproof Covers Y Y Y Y
Wicks and Gas Mantle
36 Y Y N N
Fabrics
37 Woven Fabrics of Glass Y Y Y Y
38 Woven Filter Y Y N Y
Woven Narrow Goat
39 Y N N Y
Hair Puttis Tape
Woven Narrow Jute
40 Y Y N Y
Webbing
4.7 Meditech Products

Product
3 Ply Surgical Mask &
1 Y Y N Y
Hygiene Disposables
AB Cotton (Absorbent
2 Y Y N Y
Bleached Cotton)
3 Abdominal Sponges Y Y N Y
Adhesive Gauze
4 Y Y Y Y
Bandages
Adhesive Medicinal
5 Y Y Y Y
Tapes
6 Adult Diapers Y Y Y N
7 Anti-Microbial Fabrics Y Y Y Y
8 Arm board Covers Y Y N Y
9 Artificial Heart Valves Y Y Y N
10 Artificial Joints Y Y Y Y
11 Artificial Ligaments N Y Y N
Artificial Vascular
12 N Y Y N
Grafts
13 Baby Diapers Y Y Y N
14 Baby Pants Y Y Y Y
Bleached open weave
15 and leno weave gauze Y N N Y
rolls-for export
16 Blood pressure Cuffs Y Y N N
17 Burn Therapy Dressing Y Y N N

Soaked In Protective
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Gel
18 Caps(used as Mask) Y Y N N
19 Carbo-Melt Fabrics Y Y N Y
20 Combined Dressings Y Y N Y
21 Community Masks Y Y N Y
Compression Stockings
22 and Compression Y Y Y Y
Garments
Cotton Spunlace Non –
23 Y Y N Y
Woven Roll Goods
24 Coveralls Y Y Y Y
CTG Belts and Medical
25 Y Y N Y
Mask Tapes
26 Dental Floss Y Y Y Y
Disposable Hospital
27 Y Y N Y
Bed Sheets
28 Draw Sheets Y Y N Y
Dust Mask &
29 Y Y Y Y
Respirators
30 Ear cleaning Buds Y Y Y Y
Extra Corporeal
31 membrane oxygenation N Y Y N
(ECMO)
32 Eye Pads Y Y Y Y
Finished Goods (Cotton
Balls, Pleat & Wool Roll
33 Cotton Pad, Round, Y Y Y Y
Square, Oval,
Rectangle, 5X6)
34 Gauze Swabs Y Y Y Y
35 Heart Patches Y Y Y N
36 Hernia Meshes Y Y Y Y
Hospital Room- Clean
37 Garments/Sterile Y Y Y Y
Products
38 Incontinence Diapers Y Y Y N
Inflatable mattress /
39 Y Y Y Y
pillows
Isopropyl Alcohol
40 Y Y N N
Swabs
41 Magic Coin Tissues Y Y N Y
42 Mayo Table Covers Y Y N Y
43 Medical Aprons Y Y N Y
44 Medical Bandages Y Y N Y
45 Medical Gowns Y Y N Y
Medical PPE- washable
46 Y Y Y Y
cloth- reused
Medical wear in 100%
47 Y Y N Y
cotton and 100%
_______________________________________________________________________________________________

___________________________________________________________________________________________________
synthetic fabric for

Type 6B garments
48 Medicated Cotton Wool Y Y N Y
49 Medicated Dressings Y Y Y Y
50 Medicated Lints Y Y Y Y
51 Melt-blown Fabrics Y Y Y N
52 Mortuary Bags Y Y N Y
N95 Masks-NIOSH
53 Y Y Y Y
approved
Non-surgical Face
54 Y Y N Y
Masks
55 O.T. Towels Y Y N Y
56 PPE Coveralls Y Y Y Y
57 Reusable Masks Y Y N Y
58 Reusable PPEs Y Y N Y
Sanitary towels (pads)
59 Y Y N Y
and tampons
60 Sanitizing Wipes Y Y Y N
61 Scrub Suits Y Y N Y
62 Single use PPEs Y Y Y Y
63 Surgical Disposables Y Y Y Y
64 Surgical Drapes Y Y N Y
65 Surgical Dressings Y Y N Y
66 Surgical Gowns Y Y Y Y
67 Surgical Masks Y Y N Y
68 Surgical Sutures Y Y Y Y
Surgical Swabs and
69 Y Y Y Y
Pads
70 Surgical Tapes Y Y Y Y
Synthetic Non
71 Absorbable Hernia Y Y N Y
Mesh
Synthetic Non
72 Y Y Y Y
Absorbable Sutures
73 Under Pads Y Y Y Y
74 Medical Wipes Y Y Y Y
4.8 Mobiltech Products

Product
1 Airbags Y Y Y Y
2 Automotive Carpets Y Y Y Y
Automotive Heat
3 Y Y Y N
Shields
_______________________________________________________________________________________________

___________________________________________________________________________________________________
4 Automotive Textiles Y Y Y Y
Brake Diaphragm
5 Y Y Y N
Fabrics
6 Car body Covers Y Y Y Y
Car Upholstery: Seat
7 Y Y Y Y
Cover Fabrics
8 Cargo Nets Y Y Y Y
Chafer Fabrics for
9 Y Y N Y
Tyres
10 Cycle Tyre cord Fabrics Y Y Y Y
Dipped Rayon tyre cord
11 Y Y Y N
Fabrics
Grey Rayon tyre cord
12 Y Y Y N
Fabrics
13 Headliners Y Y Y Y
Helmets (Textile
14 material inside the Y Y Y Y
helmets)
Inflatable Floats &
15 N Y Y N
Boats for Defence
16 Insulation Felts Y Y N Y
Literature pockets in
17 N Y Y N
Air planes
Marine yarns for cruise
18 N Y Y N
ships
Mooring Ropes for
19 Y Y N Y
Shipping
Nylon Tyre Cord Fabric
20 Y Y Y N
- Dipped Fabric
Nylon Tyre Cord Fabric
21 (HSN – 59021090) - Y Y Y N
Greige Fabric
Polyester Tyre Cord
22 Y Y Y N
Fabric
23 Railway Fabrics Y Y N N
24 Sails N Y Y N
25 Seat Belt Webbings Y Y Y Y
26 Spacer Mesh Y Y Y N
27 Sunblind/Sun visors Y Y N N
28 Tarpaulins Y Y N Y
29 Transport Ropes Y Y Y Y
30 Truck Covers Y Y Y Y
_______________________________________________________________________________________________

___________________________________________________________________________________________________
4.9 Oekotech Products

Product
1 Drainage Geonets Y Y Y N
2 Erosion Mats and Nets Y Y Y N
3 Geocells Y Y Y Y
4 Geomattresses Y Y Y Y
5 Geomembranes Y Y Y Y
6 HDPE/PP Geogrids Y Y Y Y
Knitted and Coated
7 Y Y Y Y
Mesh & Geotextiles
Landfill Solutions
8 Y Y N Y
(Liners and Fabrics)
9 Nonwoven Geotextiles Y Y Y Y
10 GI Wire Netting Facia N N N N
11 Geo Mattresses N N N N
4.10 Packtech Products

Product
Advanced Composites
(Anti Carcinogenic
1 Y N N Y
Packaging, Anti-
corrosive)
2 Bulk Bags Y Y Y Y
Cordura Fabrics (for
3 Y Y Y N
bags)
4 D cut bags Y Y N Y
Flexible Intermediate
5 Bulk Containers Y Y Y Y
(FIBCs)
6 Gunny Bags Y Y Y Y
7 Handle Bags Y Y Y Y
HDPE Woven Mesh for
8 Y Y N Y
Vegetable Packing
HDPE Woven Sacks
9 Y Y N Y
and Bags
10 Hook and Loop Tapes Y Y Y Y
11 Hydrocarbon Free Food Y Y N Y

Grade Bags (various
_______________________________________________________________________________________________

___________________________________________________________________________________________________
capacities)
12 Jute Hessian and Sacks Y Y N Y
13 Jute Shopping Bags Y Y Y Y
Laminated Nonwoven
14 Y Y Y Y
Fabrics
15 Leno Bags Y y N Y
16 Military Backpacks Y Y Y Y
17 Nonwoven Fabric Bags Y Y Y Y
18 Polyolefin Woven Sacks Y Y Y Y
PP Woven Sacks and
19 Y Y Y Y
Bags
20 Punching Bag Fabric Y Y Y Y
21 Rucksack Fabric Y Y Y Y
22 Sacking Bags Y Y Y Y
Soft Luggage
(including
23 Y Y Y Y
Vanity/Executive/Brief
Cases)
24 Stitching Threads Y Y Y Y
25 Tea-Bags (Filter paper) Y Y Y Y
Toiletry Bags and
26 Y Y Y Y
Satchels
27 W cut Bags Y Y N Y
28 Wallets and Purses Y Y Y Y
29 Wrapping Fabric Y Y N Y
4.11 Protech Products

Product
1 Aerostat Fabrics Y Y N Y
2 Anti-Static Garments Y Y Y Y
3 Aramid Fabric Y Y Y Y
4 Ballistic Fabric Y Y N Y
5 Bio Gas Balloons Y Y N Y
Bitumen & Wax Coated
6 Y Y Y N
Fabric
7 Bomb Disposal Jackets Y Y Y N
Bullet Proof Protective
8 Y Y Y Y
Jackets
9 Camouflage Nets Y Y Y Y
Chemical Protective
10 Y Y Y N
Clothing
Electric Static
11 Y Y Y N
Discharge Tapes made
_______________________________________________________________________________________________

___________________________________________________________________________________________________
for safety shoes and

work shoes for
electronic assembly
industries
12 EMI Shielding textiles Y Y Y N
Fighter Aircraft Special
13 Y Y Y N
Clothing
14 Fire Retardant Apparel Y Y Y Y
Fire Retardant Fabric
15 Y Y N Y
for furnishings
16 Fire Retardant Zippers Y Y Y Y
17 Flame Resistant Fabric Y Y Y Y
18 High Altitude Clothing Y Y Y N
19 High Visibility Clothing Y Y N Y
20 Industrial Gloves Y Y Y Y
Infra-red Clothing
21 Y Y Y N
(Military use)
Life Jackets and Life
22 Y Y Y Y
Belts
Man dropping
23 Y Y Y Y
Parachute Fabric
24 Meta Aramid Fibres N Y Y N
Nuclear Biological and
25 Chemical Protection Y Y Y N
Suits (NBC)
Overcoats, Capes and
26 Y Y Y Y
Anoraks
27 Para Aramid Fibres Y Y Y N
28 Submariner Clothing Y Y Y N
Tarpaulins for use of
29 Y Y Y Y
security forces
Thermal Liners for fire
30 N Y Y N
and safety
31 Truck Covers Y Y Y Y
32 Umbrella Cloth Fabrics Y Y Y Y
33 UV Resistant Clothing N Y Y N
Waterproof &
34 Y Y Y Y
Breathable Fabrics
Wind Cheaters and
35 Y Y Y Y
Rain Coats
_______________________________________________________________________________________________

___________________________________________________________________________________________________
4.12 Sportech Products

Product
Active wear A (Jackets,
Wind-cheaters, Shorts,
Outdoor legwear, Track
1 Y Y Y Y
suits, Jackets, Tear-
proof designs, Swim
suits)
Active wear B (Yoga
pants, Leggings,
Joggers, Capris,
2 Shorts, Long Tops, T- Y Y Y Y
shirts (for multiple
usage), Crop-tops,
Hoodies, Swim suits)
3 Artificial Turfs Y Y Y N
4 Basketballs Y Y Y Y
Breathable Fabric for
5 Y Y Y Y
sports jackets
Cordages for climbing
6 Y Y Y
ropes
7 Cricket Nets Y Y Y Y
8 Footballs Y Y Y Y
9 Golf Nets Y Y Y N
High Performance
Sports and swimwear
(Skinsuits, Football
jersey, Surfsuits, Golf
10 Y Y Y Y
T-shirts, Tracksuits,
Yoga pants, Swimsuits,
Sweatshirts, Trekking
apparels)
11 Hot air Balloon Fabrics Y Y Y Y
Moisture management
12 Y Y Y Y
Fabrics
Others Sports Nets
(other than Soccer,
13 Y Y Y Y
Volleyball, Tennis and
cricket)
14 Parachute Fabrics Y Y Y Y
15 Punching Bags Y Y Y Y
16 Roller Blinds Y Y Y Y
17 Rugby Balls Y Y Y Y
18 Sail Cloths Y Y Y Y
19 Shoe components Y Y Y Y
20 Shoetech-waterproof Y Y Y Y
_______________________________________________________________________________________________

___________________________________________________________________________________________________
shoes which also are

visible in dark
21 Sleeping Bags Y Y Y Y
Snookers/Pool Table
22 Y Y Y Y
Cloths
23 Soccer Nets Y Y N Y
24 Sport Composites Y Y Y Y
25 Sport Rings Y Y Y N
Sports footwear
26 Y Y Y Y
components
Sportswear (includes
27 Y Y Y Y
gloves, pads, guards)
28 Tennis Nets Y Y N Y
29 Tent Fabric Y Y Y Y
30 Toe Puffs Y Y Y N
31 Trekking Boots Y Y Y Y
32 Velcro for sports use Y Y Y N
33 Volley Ball Nets Y Y Y Y
34 Volley Balls Y Y Y Y
35 Yarns for sports shoes Y Y Y Y
36 Yarns for sportswear Y Y Y Y
4.13 Smart Textiles Products

Product
Colour changing
materials
1 Y Y Y N
(Thermochromic heat
sensitive material)
Constant Temperature
2 N Y Y N
Bandages
3 Cooling Vests Y Y Y Y
4 Fire Suits Y Y Y N
5 GPS Shoes Y Y Y Y
6 Heated Seats N Y Y N
Life Belts (Abdominal
7 N Y Y N
Belt)
Life vest for blood
8 N Y Y N
pressure monitoring
Life vest for cardiac
9 N Y Y N
patients
Music Producing
10 N Y Y N
Jackets
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Optical fibres for pulse

11 N Y Y N
monitoring
Polar protective
12 Y Y Y N
clothing
Sensor fitted medical
13 N N N N
caps
14 Ski jackets with GPS N Y Y N
15 Smart Baby Jumpsuits Y Y Y N
16 Smart Diving Suits Y Y Y N
17 Smart Gloves Y Y Y N
Smart military clothing
18 Y Y Y Y
with sensors and GPS
19 Smart Sleeves Y Y Y N
20 Smart Socks Y Y Y N
21 Smart Yoga Pants Y Y Y Y
_______________________________________________________________________________________________

5. Institutional Consumers
of Technical Textiles in India
5.1 Demand side interventions by the
Government
The growth of any industry is dependent on the level and extent of demand for its products. Government of
India is implementing schemes and measures to increase the consumption and demand for technical textiles
in the country. In addition to the discretionary use of technical textile products which happens due to market
forces in the normal course, there are also some areas of usage where Government is making it mandatory to
use technical textiles. The Government has also identified the possibilities of use of technical textiles as a part
of implementation of various national missions, community development programmes, infrastructure
development and Government schemes such as National Health Mission, Jal Jeevan Mission and National
Horticulture Mission etc.
There are 92 application areas of technical textiles that have been identified for mandatory use across 10
Central Ministries/Departments. There are 68 applications (out of 92 that have been identified) which have
already been notified for mandatory usage1. This mandate has resulted in Government Ministries/Departments
becoming significant institutional consumers of technical textile products in India. The consumption of
technical textile products by various Government departments and Public Sector Undertakings (PSUs) in India
has been described in the following sections.
5.1.1 Agrotech
Regular on-field supervision by the Government’s agricultural development personnel and promotional
incentives being offered by the Government to the farmers have already enhanced the consumption of
Agrotech products viz. micro-irrigation pipes, shade nets, vermin beds, insect nets, water carrying pipes etc.
The standards of most of these items have been notified by the BIS and Ministry of Agriculture has released
advisory for mandatory use of certain Agrotech products by various departments of Central and State
Governments. Despite all these measures, the institutional procurement has not increased significantly. This
delay is because different Ministries at the Centre and in States have not been able to issue necessary
enabling instructions and notifications for their mandatory use in schemes under their respective charge.
1 Technical Textiles: The Future of Textiles, Invest India, 2020
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Based on our research through secondary sources, it

can be inferred that the Agrotech products that are
commonly consumed by Government institutions are
fishnets and shade nets. At present, primary
consumers of these products are research institutes
working in the field of agriculture and allied vocations
under the aegis of the central government. Evidence of
recent procurement is available for Navsari Gujarat
Research Centre of ICAR-CIBA, Indian Grassland and
Fodder Research Institute, Jhansi, and Department of
Agricultural Research and Education, Dehradun.
Central Government, along with SASMIRA, has taken the initiative to promote usage of agro-textiles in the
North-Eastern region through its ambitious scheme “Promoting usage of agro-textiles in Northeastern region”
which is aimed at promoting the use of suitable agro-textiles like shade nets, ground covers, bird protection
nets, frost protection covers/crop covers, anti-hail nets, pond lining, etc.
5.1.2 Buildtech
Major institutional buyers in Buildtech segment are Public Sector Organisations and Government departments
that are involved in construction of roads & highways, railways, public works, rural development, agriculture,
water and sanitation, health, mining and telecom. Products that are commonly purchased are scaffolding nets,
tarpaulins, and tents.
Another Buildtech product that is purchased by the Government institutions is Flex. Flex banners, posters and
hoardings are used by various Government departments (most commonly it is the department responsible for
information & publicity) for information dissemination of Government messages among the public.
5.1.3 Clothtech
Typical applications for which technical textiles products of Clothtech segment are purchased by the
Government institutions are interlining, shoe fabrics, elastic and inelastic even fabrics, lining fabrics, and work
wear garments. Most of the products are consumed as part of workwear as well as uniforms of functionaries
and employees of various Government departments and PSUs.
5.1.4 Geotech
The main user departments of Geotextiles products are Ministry of Road Transport & Highways, Indian
Railways, National Highways Authority of India, Ministry of Shipping, and Ministry of Water Resources. Items
such as Geotubes, Geocells, Geonets and Geogrids are used in slopes and embankments. Woven & nonwoven
Geotextiles are used for filtration, drainage, and protection against stone protrusion, and these are among the
important products that have been authorised for mandatory usage by the Ministry of Water Resources.
Textile products have also offered inventive engineering solutions for several applications in civil and
geotechnical engineering and for infrastructure in water resources projects. The Ministry of Railways has
conducted many pilot tests for application of Geotextiles on certain routes. Items such as Geogrids and Geo-
_______________________________________________________________________________________________

___________________________________________________________________________________________________
composites have been recommended by Indian Technical Textiles Association (ITTA) to the Ministry of
Railways. Ministry of Road Transport & Highways is one of the largest institutional buyers and the largest
consumer of Geotextiles in India. The synthetic and natural Geotextiles are being used for extending the
lifespan of the roads. For district level and village level roads, the use of Coir Geotextiles which is cheaper and
bio-degradable has been initiated in many places.
Items such as Geotubes, Geomembranes, and

Geobags are often used at ports to prevent
shoreline erosion by water. An example of this is
the construction of a Geotube sea wall which
has been done at Uppada village in East
Godavari district of Andhra Pradesh for the
prevention of erosion by the sea. Irrigation
Department, Kerala has proposed the use of
Geotextile, Bags and Geo Mega Bags for
prevention of erosions. Geotubes have also been
used at Kolkata port on an experimental basis.
The Border Roads Organisation (BRO) uses jute sacks in Geotextiles application for road construction.
Under Phase 3 of the Pradhan Mantri Gram Sadak Yojana (PMGSY), the Central Government has planned to
use coir fabric for the construction of roads. This is expected to provide support to the Geotextile industry
which has been badly affected by the halt in construction due to COVID-19 pandemic. The PMGSY guidelines
for new technology states that 15 percent length of roads in each batch should be constructed as per the
latest construction technology. Of this, five percent should be developed using Indian Road Congress (IRC)
accredited technology. The IRC is now authorised to deploy Coir Geotextiles for construction of rural roads,
which implies five percent of the road would be developed using coir geotextiles.2
5.1.5 Hometech
The special fabric used for upholstery in the coaches of passenger trains is a commonly procured Hometech
product by the Government. It is Vinyl coated upholstery fabric that is Rexine made of several layers of Poly
Vinyl Chloride (PVC). It has a fire-retardant coating on one surface and backing of synthetic cloth on the other
surface. Indian Railways is the largest customer of this upholstery fabric which it uses for seat covers and
berth covers. Flooring material i.e. carpet is another product of Hometech segment that has institutional
consumers. The floor carpet is procured extensively by various Government departments and public sector
organisations for their official premises.
5.1.6 Indutech
The Government and public sector institutions that procure products in Indutech segment are organisations in
fertilisers, petrochemicals and coal mining industry and they procure products such as different types of filters,
2 Invest India (https://www.investindia.gov.in/siru/technical-textiles-future-textiles)
_______________________________________________________________________________________________

___________________________________________________________________________________________________
conveyor belts and hose pipes. In addition to that, there are many Government organisations especially in the
security functions (Army, Navy, Paramilitary forces) that procure high strength ropes of Nylon and Jute.
5.1.7 Meditech
The Government institutions that procure Meditech products are various hospitals, clinics and health centres
of central, state and local governments. The purchases are often made by those departments of respective
governments or public sector undertakings which have been entrusted with the responsibility of procurement
function. According to the Baseline report of 2016 (Source: Ministry of Textiles, Government of India), the
total annual purchases of Meditech products at Government hospitals are estimated to be worth Rs. 1,070
Crores out of which, close to 95% of the expenditure is incurred in procuring surgical dressings and sutures.
Due to the outbreak of COVID-19, there has been a huge spurt in demand for N 95 masks and PPE kits from a
large variety of institutions during 2020 and 2021.
5.1.8 Mobiltech
Textile products that are used as components in different types of automobiles, aircrafts, trains, spacecrafts,
earthmovers, forklifts are categorised under Mobiltech.
Products of Mobiltech purchased by various public sector undertakings as well as Ordnance Factories (which
produces vehicles for India’s military) are tyres (having tyre cord as the technical textile product) and other
Government Departments who purchase it for maintaining their running vehicles. In addition to this, other
items like seat belts, drive belts, hose pipes, headliners, vehicle upholstery, moulded parts, etc., are also
purchased by Ordnance factories. ISRO, Indian Air Force as well as Hindustan Aeronautics Limited procure
various components made of composites for the body and parts of aircraft, space craft and satellites.
5.1.9 Oekotech
Government departments and public sector undertakings procure soil seals, textiles drainage systems (Canal
lining), erosion prevention systems, textiles for protection against hazardous substances, textile noise barrier
systems and landfill textiles.
The study of documents accessed from published sources indicated that in the recent past, textile-based
drainage systems have been mainly procured by Inland Waterways Authority of India and the water resources
departments of various states, such as Rajasthan, Kerala, and Madhya Pradesh. Canal lining and bank
protection of rivers and canals with the use of Oekotech products is being implemented in some projects.
Military Engineer Services has procured Oekotech products for Environmental Park Irrigation System.
5.1.10 Packtech
Jute/HDPE sacks and bags are extensively used in packing fertilizers, chemicals, food grains, cement,
pharmaceuticals etc. Government is promoting it as a sustainable fabric. Jute Packaging Material Act, 1987
(JPM Act) is under force across the country and it provides for compulsory use of jute packaging material in
the supply and distribution of certain commodities in the interest of production of raw jute and jute packaging
_______________________________________________________________________________________________

___________________________________________________________________________________________________
material. The Government sector purchases jute bags worth over Rs. 7,500 Crores annually and Government
has made it mandatory for 100% of food grains and 20% of sugar to be packed in diversified jute bags.3
5.1.11 Protech
Indian armed forces and those responsible for maintaining law and internal order are the major consumers of
protective textiles products. Various items of protective apparel and protective gear are required by personnel
responsible for internal and external security. The hazardous elements from which protection is needed are
extreme weather, thermal, ballistic, nuclear, biological, chemical, flame, heat, and flash. The protective textile
products used by the country’s defence forces are classified into six broad categories:
1. High Altitude Clothing
2. Ballistic Protective Clothing - Bullet Proof Jackets (BPJs)
3. Ballistic Helmets
4. Fire Retardant Fabrics/Apparels
5. High Visibility Clothing
6. NBC Suits, CPC, Industrial Gloves & others
The annual budget for clothing of the Indian Army is

about Rs. 1100 Crores4. Nearly 35% (400 Crore) of
their requirement of protective clothing is procured
through imports while the rest of it is usually produced
and delivered by ordnance factories and different
research laboratories of DRDO. The import worth of
protective gear is over Rs. 200 Crores. Super high-
altitude clothing is one of the major items of protective
clothing that is imported from European countries.
In addition to Indian Army, there are various other organisations which consume protective clothing. For
example - Power Generation plants (e.g., those of National Hydroelectric Power Corporation Limited, NTPC
etc.), Fertilizer plants (e.g., Rashtriya Chemicals and Fertilizers Limited), and Petrochemicals plants (e.g.,
Mangalore Refinery and Petrochemicals Limited). Indian Naval Headquarters has an annual budget of around
Rs. 100 Crores for various technical textiles products such as protective and extreme winter clothing, safety
footwear, FR protective wear, NBC protection etc5. Indian Coast Guard also procures protective clothing for its
employees. Indian Air Force procures protective clothing and protective gear for pilots. The pilot’s clothing and
gear for Tejas light combat aircraft have largely been produced locally by DRDO with an import content of
only 10%. Indian Railways has been a key institutional buyer of Fire Retardant (FR) fabric and it purchases
3 Cabinet Committee on Economic Affairs, Government of India, 2020

4
Army Eyes Domestic Technical Textile Producers, TechnicalTextile.net, 2015
5
Report on the First Indian Navy-ITTA Clothing and Footwear Seminar, ITTA, 2016
_______________________________________________________________________________________________

___________________________________________________________________________________________________
nearly 40% of the FR production of India which is approximately 13.50 lakh meters and worth Rs. 30 Crores
annually.
India has a shortfall in procurement of adequate quantity of bulletproof jackets for its security forces.
Significant and continuous efforts are being made by Ministry of Textiles and Ministry of Defence to bridge this
gap. During 2016-17, 50,000 bulletproof jackets were procured for Indian Army through revenue route.6 A
contract valued at Rs. 639 Crores for capital procurement of 1,86,138 Bullet Proof Jackets (BPJs) was signed
with SMPP Private Limited in April 2018.7 Delivery of the BPJs commenced from April 2019.
5.1.12 Sportech
The growth of sports and leisure industry has created more options for the use of technical textiles in different
sports. Most of the items of sports equipment (with technical textile component) are procured by various
bodies associated with Sports Authority of India and Universities. Parachute fabrics are consumed by Aerial
Delivery Research and Development Establishment (ADRDE), the DRDO laboratory for research purposes.
Avalanche Airbag is procured by the Indian Army. On the other hand, the Ministry of Defence, the National
and State Disaster Relief Force, the Directorate of Fisheries and the Department of Defence Production
procure different Fibre Reinforced Boats, lifeboats, life jackets, sleeping bags and sports tents.
5.2 Technical textile products procured by

Government organisations & PSUs
The details of procurement of technical textiles by Government organisations and PSUs are as follows:
Table 5.1: Technical textile products procured by Government organisations & PSUs
S. Name of the Name of the agencies procuring technical List of products
No. Segment textiles products
1. Agrotech Navsari Gujarat Research Center of ICAR-CIBA Fishnets
Department of Animal Husbandry, Dairying and Fishnets
Fisheries, Government of India
Directorate of Horticulture & Food Processing, Assam Agro-textile kits
Indian Grassland and Fodder Research Institute, Jhansi Micro-irrigation sets
Department of Agricultural Research and Education, Shade nets
Dehradun
2. Buildtech Rashtriya Chemicals and Fertilizers Limited, Mumbai Tarpaulins
Chennai Metro Rail Limited Tarpaulins
Central Research Institute for Dryland Agriculture HDPE Tarpaulins
6 https://www.indiatimes.com/news/india/after-a-wait-of-seven-years-indian-army-finally-gets-first-lot-of-50-000-bulletproof-vests-266033.html
7 https://www.hindustantimes.com/india-news/defence-ministry-inks-rs-639-crore-bullet-proof-jacket-contract/story-1l411RPK5SiJACS4jca60I.html
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Ordnance Clothing Factory Avadi Tents

Braithwaite, Burn and Jessop Construction Comp Ltd Tents
Central Ground Water Board Fly Tents
Jal Sakti- River Development and Ganga Rejuvenation Fly Tents
District Health Office ZP Osmanabad Posters
Uttarakhand State Aids Control Society Posters
Western Railway - Materials Division -Pratapnagar Acrylic Board with Poster
Printing
Rashtriya Chemicals and Fertilizers Limited Posters
North Western Railway Tarpaulins
3. Clothtech Machine Tool Prototype Factory, Maharashtra Trousers
Malabar Cements Limited Uniform
Metals and Minerals Trading Corporation of India, Uniform Cloth
Karnataka
Chaudhary Charan Singh University, Meerut Uniforms
Jawaharlal Nehru Port Trust, Maharashtra Suiting and Shirting
Sashastra Seema Bal, Ministry of Home Affairs, Govt. Of Khaki Drill Fabrics
India
Delhi University- Bharti College Sports Jersey
4. Geotech Western Railway (Ratlam) Geogrids, Nonwoven Geotextiles
Central Water and Power Research Station (Pune) Geotextiles
National Hydroelectric Power Corporation Limited Geomembranes
(Subansiri Lower Project)
Bridge and Roof Company (India) Limited (Palta Work Polypropylene Woven
Project Site & Dhamra Port, Odisha) Geotextiles, Polyester
Multifilament Woven Geotextiles
National Highways Authority of India Geotextile products
Jammu And Kashmir Forest Department, NH1A project Geotextile mats, woven coir
mats and coir fibre logs
Kashmir Irrigation & Flood Control Department Geotextiles, Fabrics, Geotextiles,
Bags and Geo Mega Bags
Irrigation Department, Kerala Geotextiles, Fabric, Geotextiles,
Bags and Geo Mega Bags
5. Hometech National Council of Science Museums Floor Carpets
Delhi Metro Rail Corporation Limited Carpets
Balmer Lawrie and Company Limited Rugs
IHQ of MoD (Army) Flooring, Mattresses, Carpets
Eastern Railway (West Bengal) Vinyl coated upholstery fabric
Research Design and Standards Organization (Indian Vinyl coated upholstery fabric
Railways)
Southwestern Railway Vinyl coated upholstery fabric
S.M.S. Medical College-Jaipur Mattresses (with Rexine cover)
Rubber coir, foam, Trolley Pad
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Rubber coir, Rexine Cloth

(Baniyan Foam)
6. Indutech National Centre for Antarctic and Ocean Research, Goa Filter Fabric
Ministry of Road Transport & Highways Filter Fabric, Hose Pipes
Hindustan Organic Chemicals Limited- Materials Filter Fabric
Department
Rashtriya Chemicals and Fertilizers Limited Filter Fabric, Pipe filters,
Conveyor Belts
IHQ of MoD (Army) Nylon Filters
Department of Fertilisers, Vijaipur Air Filters
Southeastern Coalfields Limited, Bilaspur Oil Filters
Directorate of Purchase and Stores, Maharashtra Braided Teflon/PTFE Hose Pipes
THDC India Limited, Rishikesh CP Hose Pipes
The Fertilisers and Chemicals Travancore Limited, Conveyor Belts
Kerala
National Aluminium Company Limited, NALCO, Odisha Conveyor Belts
Heavy Vehicle Factory, Chennai Filter absorbent
Ordnance Parachute Factory, Kanpur Webbing nylon
Material Organisation-Kochi - NAVY Nylon ropes
IHQ of MoD (Army) Twine Jute 3 Ply, Jute Felts
7. Meditech All India Institute of Medical Science (AIIMS) Surgical items
Armed Forces Medical Supplies and Disposal Surgical items
Regional Cancer Centre, Kerala PPE Kits
Paradip Port Trust, Medical Department N95 Masks
VMMC and Safdarjung Hospital N95 Masks
Rajasthan Medical Services Corporation Limited, Jaipur N95 Masks
Employees State Insurance Corporation (Kerala) Nonwoven fabrics, Surgical
masks
Sports Authority of India, CRC Bhopal Surgical items
LGB Regional Institute of Mental Health, Assam Surgical items
Kolkata Port Trust- Medical Department Surgical items
Artificial Limbs Manufacturing Corporation of India Kneecaps
8. Mobiltech Bharat Heavy Electricals Limited
Nuclear Power Corporation of India Limited Tyre
Bharat Petroleum Corporation Limited Tyres
Eastern Coalfields Limited Tyres
Directorate General of Civil Aviation Aircrafts
Hindustan Aeronautics Limited Aircrafts
Metals and Minerals Trading Corporation Limited, Tyres
Karnataka
South Bengal State Transport Corporation, Durgapur Tyres
9. Oekotech Water Resources Department, Madhya Pradesh Canal Lining, Dam embankment
(protect soil erosion)
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Water Resources, Rajasthan Canal Lining

Irrigation Department, Kerala Canal works
Inland Waterways Authority of India Rip - Rap type Bank Protection
Military Engineer Services, Gujrat Environmental Park Irrigation
System
West Central Railway Water Recycling
Punjab Agro Industries Corporation Wastewater Recycling
Farakka Barrage Project - River Development and Deep scoured bed of Feeder
Ganga Rejuvenation Canal
10. Packtech Karnataka State Seeds Corporation Limited Packing Materials like Non-
Woven cloth bags, HDPE Bags
Food Corporation of India Jute Bags/ Teabags
Rashtriya Chemicals and Fertilizers Limited HDPE Bags
Sardar Vallabhbhai Patel National Police Academy Jute carry Bags
Madras Fertilizers Limited HDPE Bags
Department of Fertilisers- FCI Aravali Gypsum and HDPE Bags
Minerals India Ltd, Jodhpur
Indian Institute of Pulses Research-Kanpur Jute Gunny Bags
Rajasthan State Mines and Minerals Limited HDPE Woven Laminated Sacks
11. Protech Defence Materials and Stores Research and Bullet Proof Jackets and Bullet
Development Establishment (DMSRDE) Proof Helmets
Ordnance Clothing Factory, Shahjahanpur Angola drab poly wool fabric for
man’s shirt, Fabric for winter
suits
Ordnance Clothing Factory, Avadi Flame resistant (FR) Fabric
Ordnance Factory, Dehradun Jacket and Trousers (Combat PC
Disruptive)
Mangalore Refinery and Petrochemicals Limited Flame Resistant Fabric
Integrated Head Quarters of MoD (Navy) Flame Resistant Fabric, Bullet
Proof Jackets and Bullet Proof
Helmets
Defence Bioengineering & Electro Medical Laboratory Self-Cleaning and Antimicrobial
(DEBEL) Fabric
Indian Coast Guard Protective clothing
Proof and Experimental Establishment (DRDO) Protective clothing
Rashtriya Chemicals and Fertilizers Limited Flame Resistant Fabric
Headquarters, Indian Air Force Flak Jackets
Central Industrial Security Force Bullet Resistant Jackets
Central Ordnance Depot Kanpur Military Shoes
NHPC Limited- RO Jammu-NHPC Winter Jackets
NHPC Limited- Subansiri Lower Project Safety Shoes
12. Sportech Sports Authority of India, NERC Imphal Hockey sticks and balls,
Footballs
Neyveli Lignite Corporation Limited Fibre Glass Boats
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Aerial Delivery Research and Development Parachutes

Establishment (ADRDE)
Department of Defence Production Inflatable Boats
Directorate of Fisheries Fibre Reinforced Plastic (FRP)
Boats
Ordnance Equipment Factory Anti-Skid shoes
Rashtriya Chemicals and Fertilizers Limited Windsock cloth and reinforced
PVC hoses
IHQ of MoD (Army) Avalanche Airbags
Source: Central Public Procurement Portal, Government of India (Compiled by IIT Delhi)
It can be observed from the above discussions that institutional buyers play a significant role in creating a
market for technical textiles in India. The directions issued by the Government to make use of technical textile
products mandatory for certain applications are important contributors towards market development. More
opportunities should be created to enhance the awareness and subsequently the demand of technical textiles
products in India. This will expand the market and lead to more consumption of technical textiles products in
various areas of application.
_______________________________________________________________________________________________

6. Investments in Technical
Textile Industry of India
Textile sector has witnessed a spurt in investment during the last five years. The industry (including dyed and
printed) attracted Foreign Direct Investment (FDI) worth US$ 3.68 billion from April 2000 to December 2020.1
Government of India has come up with several export promotion policies for the textile sector.
India is working on major initiatives to boost its technical textiles industry. Owing to the pandemic, the
demand for technical textiles, mainly masks, PPE suits and pandemic related medical products has been on
the rise. Ministry of Textiles, Government of India is supporting the industry through various measures.
Technical textiles are gaining attention because the industry is growing at a brisk rate and offering
opportunities for innovation and employment generation. The Textile Ministry considers the sector to be a
thrust area for the Government because of the significantly high value addition that takes place in the
technical textile value chain. It is important to document and study the recent investments made by
domestic and foreign investors in the technical textile industry of India to get an idea of how attractive the
industry is for the future growth of the country. It is with this objective that extensive secondary research
was carried out and information was mined from the reports published in the last few years in mass media
as well as web sites and web portals. The documentation of FDI and domestic investment is presented in the
following paragraphs.
6.1 Foreign Direct Investment (FDI)
Policy highlight regarding FDI in textiles
Government of India has allowed 100% FDI under the automatic route in textile industry of India.
Highlights of policies related to domestic investment in technical textiles
At the central level, the main scheme to promote investment is Amended Technology Upgradation Fund
Scheme (ATUF) which is aimed at incentivising the entrepreneurs to invest in upgradation of technology. It
provides a one-time capital subsidy for ‘eligible machinery’ for a period of seven years (starting January 13,
2016). The scheme has a total budget provision of Rs. 17,822 Crore for textiles for seven years. Expenditure
1 Textile Industry & Market Growth in India, India Brand Equity Foundation, 2021
_______________________________________________________________________________________________

Section 6: Investments in Technical Textile Industry of India
___________________________________________________________________________________________________
of Rs. 21.03 Crores in 2018-19, Rs. 180.24 Crores in 2019-20 and Rs. 397.28 Crores in 2020-21 (Total for
three years is Rs. 598.55 Crores) has been incurred under this scheme in the form of subsidy released to
enterprises for technical textiles.
The cap on capital investment subsidy has been increased from Rs. 30 Crores to Rs. 50 Crores. The
Government has also invested in developing and implementing online monitoring system (which is known as i-
ATUFS for online implementation and monitoring of A-TUFS. A total of 9605 UIDs have been issued under
ATUFS for enterprises with total estimated investment in project cost of Rs. 39,826.28 Crores as of January
2020.
There are some state governments in India such as Haryana which offer special benefits to those firms who
invest in setting up textile units in their respective states.
6.1.1 Current scenario of FDI in textile industry
1. Cumulative FDI inflows in the textile sector stood at over US$ 3.46 billion between April 2000 and
September 20202.
2. The top 10 investing countries in Indian textile sector account for approximately 70% of the total FDI
inflows. The remaining 30% of the FDI is made by 35 other countries and NRIs.
3. Highest amount of FDI is routed through Mauritius which accounts for one-third of cumulative FDI
investment so far. Belgium is ranked second with USA and Singapore ranking third and fourth with a
share of 7% and 6% respectively3.
6.1.2 Recent Foreign Direct Investments in technical textiles industry
1. Toray Industries (India) Private Limited, the Indian subsidiary of Toray Industries Inc., a large Japanese
enterprise has set up its new production base in Sri City Special Economic Zone (SEZ) located on the
Andhra Pradesh-Tamil Nadu border. It is a leading manufacturer of fibres and textiles, performance
chemicals and carbon fibre material and has plans to invest about Rs 1,000 Crores in the unit which is
spread over an area of 110 acres. The unit will have two plants – polypropylene (PP) spun bond plant that
will produce advanced technical textile material (belonging to Meditech segment) used in diaper
manufacturing, and the ‘engineered plastics resin compounding’ plant that will make raw material for
electrical components of automobiles as well as electrical and electronic connectors. As per the company
sources, both plants will initially generate 130 direct and 520 indirect jobs and the number of jobs
generated will go up during subsequent phases.
2. Ahlstrom-Munksjo Fibercomposites India Pvt. Ltd. has attracted an investment of Rs. 114 Crores between
2014 and 2016.
2
Indian Textiles and Apparel Industry Analysis, India Brand Equity Foundation, 2021
3
Foreign Direct Investment Scenario in Indian Textile Sector, Wazir Advisors, 2016
_______________________________________________________________________________________________

___________________________________________________________________________________________________
3. Arvind Ltd. made an entry into nonwoven fabrics through Arvind OG Nonwovens Pvt. Ltd., which is a joint
venture between Arvind Ltd. and OG Corporation of Japan. It has established its manufacturing facilities
near Ahmedabad, Gujarat. Arvind Ltd. holds 74% equity stake in the JV with the remaining 24% coming
into India as FDI by OG Corporation. The joint venture (JV) manufactures high quality nonwoven fabrics
using needle-punch technology for bag house filtration, artificial leather and a variety of other
applications. The unit started production in May 2014 with one line of needle-punching technology. It has
an initial investment of nearly Rs. 50 Crores by the two promoter firms and Indian financial institutions.
4. Chiripal Industries Ltd. in collaboration with Tormore Investments Ltd. has generated an inflow of Rs. 42
Crores between 2014 and 2016. Further, collaboration between Chiripal Industries Ltd. and Orange
Mauritius Investments Ltd. has generated an FDI inflow of Rs. 48 Crores.
5. Government of Gujarat recently approved five big investment proposals by four firms, who will invest
close to Rs. 6,000 Crores in diverse sectors. The companies will set up manufacturing facilities in Dholera
and Halol. Baby diaper manufacturing brand Avgol’s proposal for setting up a Rs. 1,000 Crore new
technical textile plant at Halol has also been approved. Another leading company Trafalgar’s Rs. 250 Crore
investment proposal has also got the nod of the state government. The company has sought to produce
state-of-the-art natural fibre-based industrial sacks, a substitute of plastic.
6. Jayashree Textiles Ltd. announced the launch of its fabric collection made with Sorona®, a sustainable,
partially bio-based polymer. It is an outcome of collaboration between Jayashree Textiles Ltd. and DuPont
Biomaterials which has materialised in June 2021.*
7. The Kakatiya Mega Textile Park in Telangana has been set up with the main objective of providing world-
class infrastructure facilities for textile industry. South Korean textile and apparel company, Youngone
Corporation, will be investing US$119 million over the next five years, starting 2021.
8. Reliance Industries Ltd (RIL) has tied up with Turkish textile manufacturer Kivanc Tekstil to manufacture
and market its sustainable and eco-friendly fabric brand R|Elan's GreenGold fabric in Turkey.*
6.2 Major investments by Indian firms in recent

past
1. Diversified Welspun Group is investing Rs. 4,000 Crores on three large textile projects in Gujarat. The
group is investing Rs. 2,000 Crores in setting up an integrated textile manufacturing zone. It is investing
Rs. 1,000 Crores on capacity enhancement of its technical textile business, while a similar amount has
been earmarked for its advanced textile arm that makes specialised materials for aerospace, defence and
automobiles.
2. Welspun India has also established a new facility in Anjar, Gujarat, which has been built with an
investment of Rs. 150 Crores. The facility has capabilities of spun lace and needle punch lines that can
manufacture multilayer composites for various applications. The initial capacity of the manufacturing unit
is 2,400 MT per annum. Products produced at this unit provide nonwoven solutions for high-end industrial
_______________________________________________________________________________________________

___________________________________________________________________________________________________
applications such as filtration, acoustics, automotive, fire safety, thermal insulation, vibration control,
aero-space, defence, and mass transportation.
3. Reliance Industries Ltd. (RIL) has entered into a partnership with Vardhman Textiles Ltd., one of the
largest textile companies in India, to manufacture Innovative R|Elan Fabric in 2020.*
4. Ahmedabad-based Rudrax Industries is the first Indian company that has started manufacturing chemical
bonded nonwoven machinery which is used to produce nonwoven interlinings. Rudrax is setting up a
bigger production facility and plans to produce Thermobond nonwoven machines from next year.*
5. Strata Geosystems India Pvt. Ltd. has partnered with a 140-year-old textile veteran in the US, Glen Raven
Inc. in 2019 to set up a plant to provide the highest quality of Geosynthetics and civil engineering
solutions. This new facility is the largest geogrid plant in India and provides high capacity to cater to
India’s demand while continuing to strengthen international markets.*
6. Garware Technical Fibres Ltd. has in the recent past established an aerostat envelope production facility
with Aero-T from Israel providing the technology, know-how, integration, acceptance and continuous
support for aerostats development and production. Simultaneously, there has been collaboration with
Indian R&D establishments, such as DRDO/ADRDE and the end customers to understand their needs and
co-develop customised solutions.*
7. Sidwin Fabric Pvt. Ltd. has increased its capacity in 2019 by investing Rs. 10 Crores.
8. Manas Geo Tech India Pvt. Ltd. is in the process of setting up a new plant for PVC geo membrane
extrusion in Bawal, Haryana. The new plant will have a production capacity of about 5,000 tonnes
annually and by July 2021 the plant would be ready.*
9. In 2019, Geo Source invested in a drainage composite line to provide a composite product called GS
Drain, which solves major drainage problems in re-wall construction, railway tunnels and landfill sites.
Geo Source is planning to start a new nonwoven production line that will require installing a small fibre
line for its own consumption. The plan is to set this up by 2024.*
10. Kusumgar Corporates has entered into an agreement in 2020 with Thai Acrylic Fibre Co Ltd (TAF) of
Aditya Birla Group to manufacture outdoor fabrics in India with Durashine fibre. Durashine is a superior
quality solution dyed acrylic fibre from TAF and is suitable for various outdoor applications.*
11. A.T.E. has entered into a partnership with W+D BICMA Hygiene Technologie GmbH, Germany to help the
domestic textile industry to cater to the rising demand for medical and hygiene textiles. The tie-up
between A.T.E. and W+D BICMA will help the Indian textile industry expand its product offerings and
capture a fair market share in the growing medical and hygiene textile market.*
12. Supreme Nonwovens Group, through its majority-owned Thailand subsidiary Supreme Feltol Thailand Co,
has announced the acquisition of automotive interior trims and NVH business of Futuris Automotive.
Futuris is a subsidiary of Adient Plc, USA. Supreme Feltol Thailand Co is a JV between Supreme Treon and
Feltol Thailand Manufacturing Company.*
13. Supreme Group is taking 100% ownership of Supreme-Treves, which was established in 1996 as a joint
venture between Supreme Nonwovens and Trèves of France, a Tier 1 system supplier of automotive
interior trim and noise, vibration and harshness (NVH) components.*
_______________________________________________________________________________________________

___________________________________________________________________________________________________
6.3 Initiatives taken by the Government of India

1. Under Union Budget 2020-21, a National Technical Textiles Mission (NTTM) was proposed for a period
from 2020-21 to 2023-24 at an estimated outlay of Rs. 1,480 Crores.
2. Under the Scheme for Integrated Textile Parks (SITP), 5 technical textile parks were sanctioned with the
budgeted outlay of Rs. 200 Crores.
3. Under the Technology Mission of Technical Textiles, 11 Focus Incubation Centres (FICs) have been set up
to help budding entrepreneurs develop innovative technical textile products. An investment worth Rs.
59.35 Crores has been made for the same.
4. In Union Budget 2020-21, the Government of India has allocated around Rs. 3,515 Crore to the Ministry
of Textiles and Rs. 80 Crores for the scheme on Integrated Textile Parks.
5. The Government of India has launched Production Linked Incentive (PLI) scheme to provide incentives for
manufacture and exports of specific textile products made of manmade fibre. Under the scheme, the
government has approved Rs. 10,683 Crores for manmade fibre and technical textiles manufacturing.
6. The Government of India has also launched Amended Technology Up-gradation Fund Scheme (A-TUFS),
estimated to create employment for 35 lakh people and enable investment worth Rs. 95,000 Crores by
2022. In Union Budget 2020-21, the Government has allocated Rs. 761.90 Crores for Amended
Technology Upgradation Fund Scheme (A-TUFS).
7. On January 27, 2021, the Textiles Committee, Ministry of Textiles, India signed an MoU with the
Nissenken Quality Evaluation Center, Japan to provide required support to each other’s textile industries
and improve trade between the two countries. The main objective of this MoU was to ensure that
Japanese buyers are guaranteed quality Indian textiles through a testing and conformity assessment,
research and development (R&D), and consultancy. Both countries have agreed to share and exchange
relevant technical information on a regular basis, put in place standards and quality assurance norms.*
8. In 2018, a budget of Rs. 25 Lakhs was allocated by the Tamil Nadu Government (India) to promote
technical textiles.
__________________________________________________________________________________________________________
*Data on amount of investment is not available in the public domain
_______________________________________________________________________________________________

7. Employment potential of
Technical Textiles in India
7.1 Employment scenario in technical textiles
India’s textiles and apparel industry that contributes 2.3 percent to the country’s GDP, is responsible for 13
percent of industrial production and 12 percent of export earnings. It is the second largest employer in the
country and provides employment to about 45 million people. This figure is likely to have touched 55 million
by the end of 2020.
The Indian technical textile industry is estimated to employ about 12 lakh people directly and 3 to 4 times
indirectly in 2019-20. Even though the employment figures are not accurately available, a fairly safe and
conservative estimate of the numbers can be arrived at on the basis of 9.89 lakh direct employees of technical
textile industry in year 2012-13 that was stated in the ‘Baseline survey of the Technical Textile industry in
India (2016)’, commissioned by the Ministry of Textiles, Government of India. This survey also states that the
technical textile industry witnessed steady growth in employment at a rate of 3% per annum during the
previous five years. It had also projected that the growth of man-power employed in technical textile sector
would continue to be 3% and was expected to reach 10.80 lakh by 2015-16.
Since then, we have witnessed an uptick in investments as well as a step up in growth of technical textiles on
the back of a slew of policy measures introduced by the government and a rapid increase in the variety and
number of applications that technical textiles have been put to. The industry has experienced a CAGR of 12
percent in the last five years, a faster growth than in any years prior to that. It is reasonable to assume that
with a CAGR of 12 percent, direct employment would have continued to grow at the rate of at least 3 percent
per year. If that be so, then the direct employment in 2019-20 is expected to be around 12.16 lakhs.
Table 7.1: Estimated employment in India’s technical textile industry

Financial Year Employment (Persons in lakhs)
2015-16 10.80
2016-17 11.12
2018-19 11.80
2019-20 12.16
Source: IIT Delhi Analysis
As per the Baseline survey (2016), skilled manpower comprises approximately 43% of the total manpower
employed in Indian technical textile industry. The primary survey of product manufacturing enterprises carried
out by IIT Delhi as part of the present Baseline Survey (2020) has yielded that skilled manpower constitutes
51% of the manpower employed in the industry. It establishes that technical textiles is a specialised field and
_______________________________________________________________________________________________

Section 7: Employment Potential of Technical Textiles in India
___________________________________________________________________________________________________
therefore, as in the past, the skilled workforce will continue to form a significant part of total workforce. The
recent survey of sample firms as part of the present study indicates that the overall growth in employment in
India has been at a rate of 7%. The deployment of skilled workforce increased at the rate of 5 percent
annually, that of semi-skilled workers increased at 12 percent per year and of unskilled workers at 8.5 percent
in recent years. The semi-skilled workforce is around 21 percent and unskilled workforce 28 percent of the
total workforce. 37 percent of the surveyed firms reported having employees who had undergone formal
textile education.
Converter industries such as those in Packtech segment are characterised by requirement of an additional
workforce that is involved in converting the technical textile into final products. Even though the exact census
of such workforce is not available, anecdotal accounts of industry professionals peg the number of people
involved in convertor industries at around 1.75 Lakh. Some technical textile material that such converter
industries make are Jute and hessian bags, FIBC bags, Canvas tarpaulins, HDPE tarpaulins, and so on. The
converter industry does the fabrication and stitching from the specified technical textile fabric.
7.2 Employment outlook in Technical Textiles

Government of India and the governments of various states have introduced several new and unique policy
measures, guidelines and incentives to spur the growth of Technical Textile industry to a level that is
significantly higher than in the past. Some of these schemes and initiatives that will add to the growth in
employment are as follows:
1. Scheme for Integrated Textile Parks (SITP): Under the Scheme of Integrated Textile Park (SITP),
Government provides 40% subsidy with a ceiling of Rs. 40 Crores to set up Textile Parks for
infrastructure creation and employment generation. There are 56 textiles parks which have been
sanctioned and are being implemented. Once these become fully operational, the above parks are
expected to house 5,333 textile units and generate employment for about 3,44,443 persons and
attract investment of over Rs. 26,529 Crores. An amount of Rs. 1,398.98 Crores has been released
under SITP in these 56 textile parks. So far, 23 textile parks are complete as per scheme guidelines.
Also, the Government of India has approved a scheme for setting up Mega Investment Textiles Parks
(MITRA) over the next three years to give domestic manufacturers a level-playing field in the
international textiles market. Based on the figures available from existing and upcoming parks, an
investment of Rs. 800-900 Crores generates an approximate employment for 10,000-12,000 people.
There are two textile parks associated with technical textiles that are partly operational (Mundra SEZ
Textile & Apparel Park Limited and and Vraj Integrated Textile Park Limited). It is expected that these
will provide employment to around 20,000 people once these are fully operational as per plan.
2. Amended Technology Upgradation Fund Scheme for textiles industry (ATUFS): A budget provision of
Rs. 17,822 Crores has been approved for seven years from 2015-16 to 2021-22 to meet the
committed liabilities of Rs. 12,671 Crores, and Rs. 5,151 Crores for new cases registered under
ATUFS. The scheme is likely to attract an investment of Rs. 100,000 Crores and create more than 35
lakh jobs signifying that Rs. 2.86 Lakhs worth of new investment is required per generated job
_______________________________________________________________________________________________

___________________________________________________________________________________________________
through this scheme. As per the Annual Report of the Ministry of Textiles (2020-21), for the entire
textile industry, 11107 UIDs have been issued with project cost of Rs. 46,860.70 Crores and
provisional subsidy value of Rs. 3,378.06 Crores committed till 25.03.2021. Progress of ATUFS as
regards only the technical textiles is given as under:
Table 7.2: Progress of ATUFS as regards technical textiles
S. Segment Name No. of UID Project Cost Subsidy Amount Employment

No. Issued (Rs. Crores) (Rs. Crores)
New Existing Total
1 Technical Textiles 403 2669.83 246.08 6221 20315 26536

(15% subsidy)
(Source: Annual Report 2020-21, Ministry of Textiles, Government of India)
New employment for 26,536 people has been generated just on account of the impact of ATUFS.
3. Samarth (Scheme for capacity building in textile sector): The scheme had an estimated budget of Rs.
1,300 Crores and aimed to train 10 lakh persons over a period of 3 years (2017-20). This scheme has
tried to address the shortage of skilled manpower in textile sector, including technical textiles. Figures
for technical textiles are not available separately.
4. National Technical Textiles Mission (NTTM): This is the most important, exclusive and ambitious
scheme till date and it aims to position the country as a global leader in technical textiles market. Its
aim is to take domestic market size of technical textiles industry to US$ 40-50 Billion by the year 2024
with an average growth rate of 15-20% per annum. The multipronged approach that is being
envisaged in NTTM is meant to give a major boost to employment generation. The Mission will have
four components including research, innovation and development with an outlay of Rs. 1,480 Crores;
promotion and market development; export promotion; education, training and skill development. The
Mission will promote technical education at higher engineering and technology levels related to
technical textiles and its application areas covering engineering, medical, agriculture, aquaculture and
dairy segments. Arrangements have been made under the Mission for skill development of 50,000
people in the field of technical textiles.
Considering the recent thrust being given to technical textiles, it will not be unreasonable to assume that a
growth rate of 4 percent can be safely assumed for projection of employment generation from 2019-20
onwards and upto the year 2024-25. Based on those projections, the employment in technical textiles is
likely to be as shown in the following table:
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Table 7.3: Projected employment in India’s technical textile industry

Financial Year Employment (Persons in lakhs)
2019-20 12.16
2020-21 12.64
2021-22 13.14
2022-23 13.67
2023-24 14.22
2024-25 14.78
Source: IIT Delhi Analysis
The employment in India’s technical textiles industry is projected at 14.78 lakh persons by 2024-25.
7.3 Educational qualifications and skills required

for jobs in technical textiles
A study was carried out regarding the jobs that have been advertised in the media over the past two years.
The following table shows the various jobs that have been advertised in the technical textiles industry. These
jobs range from junior to senior positions and as can be seen from the table, each role requires different
levels of technical knowledge and educational qualification.
Table 7.4: Educational qualification and skills required for various jobs under technical textiles
S. Job Educational Work experience Skills required and tasks

No. Title/Designation qualification Required desired performed
1. Machine operators No requirement specified Prior work experience - Must have sound skills of working
and machine helpers in operating textile on and routine maintenance of
machines or assisting textile machine(s)
the operators of - Should have a good understanding
textile machines in of the varying quality of output
textile manufacturing that can be produced by textile
units is essential machines being used in India
- Must have an aptitude to learn,
absorb and utilise the different
capabilities of the machines
- Should be able to handle basic
maintenance of the machinery
- As a helper, the person should be
able to assess the requirement of
consumables and maintain the
stock of the same. Basic skills for
maintaining machines as well as
assisting the operator in record
keeping is essential
2. Floor managers and Bachelor’s degree in any Relevant and - Ability to communicate well with
_______________________________________________________________________________________________

___________________________________________________________________________________________________
supervisors field is desirable but is adequate experience the factory labour

not essential. Person(s) in textile engineering/ - Ability to ensure machine and
with relevant experience technology is worker efficiency on the
in textile industry may be essential manufacturing floor
considered without a - Ability to build and implement
degree. work roster for workers for daily
shifts
- Ability to ensure that orders are
completed on time
3. General managers, Bachelor’s degree in any Prior, extensive - Ability to coordinate with all the
plant managers, and discipline is acceptable, experience of floor managers/supervisors to
production managers however, a degree in a handling ensure smooth functioning at the
technical discipline is middle/senior production facility/factory
preferred. management - Ability to coordinate with various
responsibility in textile departments such as production,
A diploma in textile industry is essential quality control and research and
technology and textile development
engineering is desirable - Ability to ensure that the
for some of the positions production process is efficient
- Ability to ensure timely completion
of orders
- Ability to handle responsibility for
the upkeep of infrastructure and
machinery
- Ability to ensure that products
meet the quality standards and
are consistent
4. Vice-Presidents, Bachelor’s Degree in a Prior and relevant - Ability to provide technical advice,
senior consultants, relevant discipline experience in textile inputs to design, production
and expert advisors depending upon the line industry is essential processes and marketing
of products being for each of the roles strategies
manufactured by the at this level - Ability to coordinate with several
company. The degrees manufacturing units and ensuring
specified include Textile quality standards
Technology, Electrical - Ability to ensure that products
Engineering, Chemical meet all the requirements and
Engineering/Processing, specifications
Mechanical Engineering,
- Must provide technical training to
Quality Assurance,
other employees
Quality Control etc. In
some cases, a Master’s - Should be able to fine tune the
degree in the relevant production process(es) in the
field or MBA is also manufacturing units under their
specified as a charge
requirement for such jobs - Ability to enhance the supply
chain
- Ability to maintain the public
relations of the firm
- Act as a bridge between workers
and the management of the firm
- Should be able to develop and
expand the business of the firm by
adding more customers or adding
_______________________________________________________________________________________________

___________________________________________________________________________________________________
more sales to existing customers

5. Research and Bachelor’s and Master’s - Should have thorough
Development (Textile degree is required. understanding of Material Testing
Research Doctoral degree is Methods and Standards
Associations and desirable for many - Ability to help in product, method
Centres of positions development and trouble shooting
Excellence) - Understand customer expectations
and develop appropriate products
and services
- Should have experience of textile
processing, ability to carry out
defect analysis, root cause
analysis and suggest solutions
- Should be able to carry out
process audit and suggest process
improvements, support
implementation of Quality
Management Systems /
certifications, chemical testing,
waste water treatment
- Experience in technical textile
product development and
production activities
7.4 Frequent recruiters in technical textiles

Reliable and accurate information about names of such firms which recruit frequently is important to know for
all those studying employment in technical textiles industry of India. Therefore, the advertisements placed by
firms for recruitment of professionals specialising in technical textiles were scanned and identified from three
major internet-based job portals viz. Naukri.com, Monster.com and Timesjobs.com. In addition to this, the
websites and media reports associated with colleges and polytechnics that offer diploma courses in textiles
were studied carefully and a consolidated list of firms which were reportedly hiring diploma holders from such
institutions was prepared. The information about job openings posted by firms of technical textile industry on
two other websites viz. Local Walkins and Work India were also studied. The names of the organisations
which recruit professionals frequently for their technical textiles operations are as follows:
• Supreme Nonwoven Industries Pvt. Ltd. as well as other firms of ‘Supreme Group’
• Century Enka Ltd.
• Techfab India Industries Ltd
• SRF Ltd.
• Bombay Dyeing Ltd.
• Arvind Ltd. as well as other firms of Arvind group
• Welspun India Ltd. as well as other firms of Welspun Group
• Alok Industries Ltd.
• Premier Mills Pvt. Ltd. as well as other firms of Premier Mills Group
_______________________________________________________________________________________________

___________________________________________________________________________________________________
7.5 Major concerns related to employment in

technical textiles
The industry faces shortage of skilled man-power. The major concerns pertaining to manpower are as follows:
1. Lack of adequate seats at ITIs and Polytechnics related to textile technology, leave alone technical
textiles: Technical textiles industry needs skilled workers for many of its common operations such as
coating of fabrics, different stages in the production of nonwovens and working on composites, etc. At
present, the institutes offering courses in the textile stream do not provide specific training and
education that is required for technical textile industry. Enterprises have to invest considerable
amount and effort in providing on-the-job training or develop in-house training courses so as to equip
the employees with basic essential level in technical textiles.
2. High attrition: Industry faces lack of skilled employees especially because of frequent advancements
in technologies. This makes it essential that engineers and technologists working in the industry stay
in the industry and upgrade their skills and knowledge. However, it is observed that engineers and
technologists who were formally educated for career in textiles, often leave for careers in IT services,
data analysis and business management, due to inability of the industry to pay adequate
compensation which is needed to retain such talent.
_______________________________________________________________________________________________

8. Major Firms of Indian
Technical Textile Industry
8.1 Arvind Limited
8.1.1 Company snapshot
Information Description
Year of Incorporation 1931
Key Executive (s) & Designation Aamir Akhtar (CEO, Lifestyle Fabrics – Denim), Susheel Kaul (CEO, Lifestyle
Fabrics – Knits & Wovens), Mr. Ashish Kumar (CEO, Arvind Advanced Materials
and Arvind Envisol), Kamal Singal (MD & CEO, Arvind SmartSpaces Ltd.), J. Suresh
(MD & CEO, Arvind Fashions), Rishi Roop Kapoor (CEO, Anup Engineering), Dinesh
Yadav (CEO, New Businesses), Shailesh Chaturvedi (MD & CEO, Tommy Hilfiger
Apparels India), Vipen Malhotra (President & CEO, Arvind Ltd.), Brijesh Bhatti
(CEO, Ankur Textiles)
Primary business Fabric and Apparel, Brands & Retail, Advanced Materials, Telecom, Real Estate,
Engineering, Environmental Solutions, & Internet
Geographical Presence Manufacturing facilities in Gujarat, Maharashtra and Karnataka

Offices across India and Abroad
Global exports
Number of Employees Total 42000 across verticals (3000 in Advanced Materials Division)
R&D expenditure during 2020 Rs. 33.27 Crores (Overall for Arvind Limited)
_______________________________________________________________________________________________

Section 8: Top Ten Firms of Indian Technical Textile Industry
___________________________________________________________________________________________________
8.1.2 Operating business segments
Advanced Materials Division (AMD) Arvind Advanced Materials is an endeavour to branch out into other areas of
material science which use textiles as a backbone. Focus is on new fibres, new
technology, and new products to solve the problems of infrastructure, healthcare,
energy, and industrial applications. The product range comprises different kinds of
Filter Fabrics, Belting Fabrics, Coated Fabrics, Nonwoven Fabrics, Filter Bags,
Protective Fabrics and Garments, FFP2 mask, Coverall for PPE, Glass and
composites.
Fabric and Apparel Arvind supplies fabric for many high-fashion brands across the world. It has
started amalgamation of wearable tech with its Fabrics. It has increased the use
of Better Cotton Initiative (BCI) and other sustainable yarns. It is making denim,
woven, knits and voiles Fabrics and garments.
Brands & Retail Arvind Lifestyle Brands Limited retails a range of global fashion brands to the
country across categories. .Some of the brands are ARROW, SEPHORA, IZOD,
TRUE BLUE, TOMMY HILFIGER.
8.1.3 Technical Textiles product portfolio
Segment Brand/Product
Agrotech Agro Nets
Buildtech Coated Fabric for Tarpaulins, Hoardings & Signage, Modern construction roof and
structural material for construction using composite material
Clothtech Sewing threads and nonwoven interlinings
Geotech Geogrids
Hometech Window Blinds
Indutech Filtration Fabrics, Belting Fabrics and Composites
Meditech Surgical Cotton, Laboratory Coats
Mobitech Seat Cover Fabrics
Oekotech Filter Bags
Packtech Luggage Fabrics
Protech Fire Retardant Fabrics and garments, and FFP2 Masks, Coveralls for PPE, High
Altitude Clothing, Chemical Protective Clothing, High Visible Clothes & Industrial
Gloves etc.
Sportech Badminton Racquet, Tennis Racquet, Hockey stick etc.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
8.1.5 Revenue share by segment

8.1.4 Sources of revenue share (2020)
(2020)
Exports,
80% Advanced
Materials,
9.70%
Others,
90.30%
Domestic,
20%
8.1.6 Business performance of technical textiles in last three years (Rs. Crores)
Business Performance Outcomes 2018 2019 2020

Net Sales 630.00 715.00 679.00
Net Profit Information not available
Operating Profit 65.00 91.00 98.00
Return on Capital employed 9.9% 10.2% 8.8%
8.1.7 Key strategic moves and developments related to Technical Textiles
Year Strategy Description

2019-21 Product innovations & Carbon fibre moulded sports goods like tennis rackets, badminton rackets,
development hockey sticks
Continuous lamination driven Fibre Glass Reinforced sheets
Thin-wall pultrusion Radomes, heavy FRP decks, epoxy resin products
Belting products based on new blends like cotton nylon, aramids, leno etc.
High temperature nonwoven filter products based on Meta Aramids
Viscose felt for biodegradable packing
Expanded range of human protection products such as electric arc protection,
molten metal protection, high visibility protection clothing
Product innovations & Expanded range of human protection products such as electric arc protection,
development at Human molten metal protection - Aluminium & Iron (D3/E3 protection), Extreme cold
Protection division weather clothing (designed for minus 50ºC), Sleeping bags for protection
against extreme cold (upto minus 50ºC), NBC (Nuclear biological chemical)
suit and high visibility protection clothing
_______________________________________________________________________________________________

___________________________________________________________________________________________________
8.1.8 Company overview
Arvind Limited, founded in 1931, is the flagship company of a US$ 1.5 billion-dollar conglomerate. It is among the
global leaders in apparel manufacturing and is also transforming water management through its subsidiary Arvind
Envisiol which provides end-to-end solutions for water & wastewater treatment, desalination & zero liquid
discharge. The company sources state that Arvind Limited is an innovator in advanced materials and a wearable
technology manufacturer that is also delivering state-of-the-art engineering solutions. Arvind owns 22 global
patents for environmental solutions, and is the largest fire protection fabric producer in the country.
8.1.9 Contact information
Name of company: Arvind Limited
Address: Naroda Road, Near Chamunda Bridge, Ahmedabad-380025, Gujarat, India
Telephone: +91-79-68268000
Email: [email protected]
8.2 BMD Private Limited
Ravi Jhunjhunwala (Director), Shekhar Agarwal (Chairman), Shantanu
Key Executive (s) & Designation
Agarwal (Managing Director)
Primary business Manufacturing of Fabric
Manufacturing facilities in Rajasthan and Gujarat
Geographical Presence Offices across India
Exports to ~75 countries
Number of Employees 800
R&D expenditure during 2020 Rs. 5 Crores
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Automotive Furnishing - Woven Flat Woven – Dobby, Jacquard, Pile Woven – Dobby
Fabrics
Automotive Furnishing - Knitted Warp Knits and Circular Knit types; Flat, Pile and Spacer Fabrics in
Fabrics the Warp Knits category, Flat Jacquard and Pile Jacquard in the
circular knits
Office Furnishing Fabric Woven and Knitted Fabrics for use in office furnishing
Flame-Retardant Textiles Meta-Aramid, Modacrylic and Cotton based Flame-Retardant textiles
for use in industrial workwear
Mobitech Automotive Furnishing Fabrics
Protech Flame-Retardant Textiles for Workwear
8.2.4 Sources of revenue share 8.2.5 Revenue share by segment

(2020) (2020)
Automotive
Furnishing Fabrics ,
95%
Flame-
Retardant
Textiles,
5%

Net Sales 279.60 197.91 179.45
Net Profit 10.96 -3.72 3.85
_______________________________________________________________________________________________

___________________________________________________________________________________________________

1997 New product manufacturing Started production through process of Weaving Warp Knitting and Tricot
Yarn Manufacturing Processing & Lamination
Automotive Furnishing Fabrics Launched the company to cater to the automotive furnishing fabric
requirements of the domestic market in a JV between the Bhilwara Group
and Melba of Australia and DeWitte Lietaer of Belgium
Promoted as a JV for LNJ Bhilwara Group 50%, Melba Ind Australia 25% and DE Witte Belgium
manufacture of automotive 25%
fabric
New product manufacturing Started production through process of Weaving Warp Knitting and Tricot
Yarn Manufacturing Processing & Lamination
2003 New product manufacturing Started facility of Circular Knitting
2004 New development Roller Embossing
2005 Collaboration Technical collaboration with Kawashima Japan & Michel Thierry
2008 Technical collaboration with Serien Japan
2009 1. Technical collaboration with Borgstena Group, Portugal
2. Improved the quality and focus on costs and also started Plate Embossing,
Laser cutting, Welding dope dyed yarn
2020 Flame-Retardant Fabrics for Developed and launched a complete line of Flame Retardant textiles for
Workwear workwear
BMD Private Limited was founded in 1997 and is among the large manufacturers of automotive furnishing fabrics
in India. BMD’s products are used as fabric for seating and door trims for automobiles. Special fabrics
manufactured by BMD are also used in aircrafts, ships and auditoriums. It is a TS 16949 certified company; BMD
is a supplier to most of the renowned names in automotive industry. It is a part of the LNJ Bhilwara Group, a
billion-dollar conglomerate with significant presence in Textiles, Graphite Electrodes and Power generation.
Name of company: BMD Private Limited
Address: Bhilwara Towers, A-12, Sector 1, Noida- 201301 (NCR Delhi), India
Telephone: +91-120-4390300
_______________________________________________________________________________________________

___________________________________________________________________________________________________
8.3 Garware Technical Fibres Limited
Key Executive (s) & Designation Vayu R Garware (Chairman & Managing Director)
Primary business Technical Textiles
Manufacturing facilities in Gujarat and Maharashtra
Geographical Presence Offices across India and in USA, UK, Canada, Australia, Chile and Norway
Number of Employees 1198 (Including apprentices and probationers)
R&D expenditure during 2020 Revenue Expenditure - Rs. 11.56 Crores and Capital Expenditure - Rs. 1.06 Crores
Fully assembled Trawls, Purse Seine Nets, Gill Nets, Dole Nets, Pelagic Nets,
Fisheries
Ropes & Twines
Cage Nets, Predator protection Nets, Anti Bird Nets, Mooring System, Sea Lice
Aquaculture
Solutions
8 Strand Shipping Ropes, 3 Strand Industrial Ropes, Specialty Ropes, 12 Strand
Shipping & IPD
Ropes, Safety Nets, Cargo Nets, Braided Ropes, Rope Articles, UHMPE Ropes
Tennis Nets, Volley Ball Nets, Basket Ball Nets, Ski Nets, Cricket Nets, Badminton
Sports
Nets, Golf Practice Nets, Soccer Nets, Batting Cages, Handball Nets
Shade Nets, Insect Nets, seed production cages, Anti Hail, Nets, Anti Bird Nets,
Agriculture
Crop Support Nets, Staking Cords
Safety Nets, Harnesses, Lifting slings, Ropes, Gloves Safety PPE &Fall Protection,
Safety
Anti bird Nets
Truck PVC Tarpaulins, Pandal Tarpaulins, Awnings, Auto hoods, Bouncies, Bio Gas
Coated Fabrics
Balloons, Bio-Flock, Tank Covers, Inflatables, Transport Ropes, Pandal ropes
Aerostat Balloon, Radome, Ropes, Camouflage Nets, Air Inflatable Tents,
Defence
Deployable Tents, Mosquito Nets, Recovery Ropes, UHMPE Ropes, Cordages, etc.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Shade Nets, Insect Nets, Seed production Cages, Anti Hail Nets, Anti Bird Nets, Crop Support Nets,
Agrotech Staking Cords, Fully assembled Trawls, Purse Seine Nets, Gill Nets, Dole Nets, Pelagic Nets, Ropes &
Twines
Buildtech Safety Nets, Harnesses, Lifting Slings
Geo Fabrics, Mulch Mats, Boulder Protection Nets, Landfill liners / Fabrics, Polymer and Steel Gabions for
Geotech
Shore Protection etc.
Hometech Industrial Ropes, Mooring Ropes for Shipping, High Tenacity Poly Propylene
Indutech Multifilament Yarn, Twine, Stitching Thread, Transport Ropes
Oekotech Landfill Solutions
Packtech Stitching Threads
Protech Tarpaulins, Truck Covers, Bio Gas Balloons, Camouflage Nets
Cricket Nets, Soccer Nets, Volley Ball Net,
Sportech
Tennis Nets, Golf Nets etc. - all types of Sports Nets and accessories

(2020) (2020)
Business performance outcomes 2018 2019 2020

Net Sales 885.50 1017.82 944.72
Net Profit 105.12 125.61 178.01
_______________________________________________________________________________________________

___________________________________________________________________________________________________

2020-21 Application focused The company has developed a special strategy wherein the pain
Solution Strategy points of the end users are assessed during interaction and the
company develops differentiated effective product(s) as part of the
solution
Garware Technical Fibres Limited (Formerly Garware-Wall Ropes Limited) is one of India’s leading players
in the technical textile sector. Established in 1976, the company today is a multi- divisional, multi-
geographical technical textiles company and is known for providing world class innovative solutions in high
performance aquaculture Cage Nets, Fishing Nets, Sports Nets, Safety Nets, Agricultural Nets, Coated
Fabrics, Polymer ropes and Geosynthetics. A thrust on international business over the years has seen
Garware Technical Fibres’ global footprint growing steadily. Garware Technical Fibres has global presence
by way of subsidiaries in USA & Chile and Overseas Representative offices in key cities close to its
customers in over 75 countries. The Company's products are manufactured in state-of-art facilities at Wai
and Pune (both in Maharashtra, India).
Name of the Company: Garware Technical Fibres Limited (Formerly Garware-Wall Ropes Limited)
Address: Plot No 11, Block D1,M.I.D.C, Chinchwad, Pune – 411019, Maharashtra, India
Telephone: +91-20-27990301, 27990306
Email: [email protected]/ [email protected]
_______________________________________________________________________________________________

___________________________________________________________________________________________________
8.4 Kusumgar Corporates Private Limited
Key Executive (s) & Yogesh Kantilal Kusumgar (Director), Siddharth Yogesh Kusumgar (Director),
Designation Kiran Nagindas Shah (Director), Ankur Kothari (CEO)
KCPL manufactures technical textiles, including Parachute Fabric, Aeronautical and
Primary business Ballistic Fabric, Military and PPE Kits, Outdoor Fabrics, Industrial Fabrics, Workwear,
Rucksack, Luggage and Automotive Fabric
Manufacturing facilities in Gujarat
Geographical Presence Offices across Gujarat and Maharashtra
Exports to USA and EU
Number of Employees Approximately 250 employees
R&D expenditure during 2020 Rs. 10.4 Crores
8.4.2 Operating Business Segments
Wearables Military Fabrics, Outdoor Fabrics, Workwear Fabrics, Automotive Fabrics,
Medical Fabrics, Custom Fabrics
Non- wearables Aeronautical Fabrics, Industrial Fabrics
Military Fabrics
Clothtech Workwear
Uniforms
High Altitude Clothing
NBC Clothing
Tactical Vests
Hometech Outdoor Fabrics with TAF’s Durashine (acrylic based)
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Indutech Textile Tapes

Peel ply Fabrics
Belting Fabrics
Hydraulic and Silicone Hoses
Liner Fabrics
Automotive Hoses
Meditech Medicated Dressings
Surgical Tapes
Blood Pressure Cuffs
Fabrics for Stretchers
Inflatable Mattresses / Pillows
Ballistic Fabrics
Protech Workwear
Active wear
Sportech Backpack
High Altitude Clothing
8.4.4 Sources of revenue share (2020)
8.4.5 Revenue share by segment (2020)
Military Fabrics, Aeronautical

25% Fabrics, 20%
Custom Fabrics, 5%
Outdoor Fabrics,
Medical Fabrics, 5% 10%
Automotive Fabrics, Workwear Fabrics,
5% 5%
Industrial Fabrics,
25%
_______________________________________________________________________________________________

___________________________________________________________________________________________________

Net Sales 132.92 128.81 181.19
Net Profit 10.46 6.6 13.06
Return on Capital employed 12.3% 6.67% 14.6

2019-20 More focus on export opportunities Industrial segment, medical textile, performance
fabrics.
2020-21 Booming sector, need of textiles beyond PPE kit, Advance high performance fabric, speciality
apparel and functional advantage of products for military use
textiles in technologies.
Kusumgar Corporates Private Limited is one of the leaders in the highly niche technical and specialised textiles
sphere. According to the company sources, it is its ability to offer customized solutions coupled with world-
class quality and highly competitive prices that has propelled the company to a leadership position in a short
span of time. It offers a comprehensive range of textiles for a wide spectrum of applications. Its range
includes: Cordura Fabrics, Custom Fabrics, Geo-synthetics, Recreational Fabrics, Parachute Fabrics, Protective
Fabrics, Ballistic Fabrics, Filter Fabrics, Parasail Fabrics, Impression Fabrics and Medical Textile Fabrics.
Name of company: Kusumgar Corporates Private Limited
Address: 101, Manjushree, V.M. Road, J.V.P.D., Vile Parle (West), Mumbai – 400056, Maharashtra, India
Telephone: +91-22-61125100
_______________________________________________________________________________________________

___________________________________________________________________________________________________
8.5 SRF Limited
Key Executive (s) & Designation Arun Bharat Ram (Chairman), Ashish Bharat Ram (Managing Director)
Primary business Technical Textiles, Chemicals Conglomerate
Manufacturing facilities in India, Thailand, South Africa and Hungary
8.5.2 Operating Business segments
Fluorochemicals Business Refrigerants, Industrial Chemicals, Pharma Grade
Specialty Chemicals Business Agrochemical Industry, Pharmaceutical Industry
Technical Textiles Business Tyre Cord Fabrics, Belting Fabrics, Polyester Industrial Yarn
Indutech Polyester Industrial Yarn, Belting Fabric
Mobitech Nylon Tyre Cord Fabric, Polyester Tyre Cord Fabric
_______________________________________________________________________________________________

___________________________________________________________________________________________________

(2020) (2020)
Domestic, Laminated fabric, Coated

fabric and other ancilliary Nylon tyre cord
96%
activities, 1.17% fabric/
Polyester tyre
cord fabric/
Belting fabric,
86.82%
Synthetic filament yarn

including industrial
Exports, 4% yarn/ Twine, 11.99%

Net Sales 1532.6 1735.7 1357.6

2017-18 R&D The R&D centre of Technical Textiles Business has developed many variants
of Polyester Industrial Yarns for as reinforcements in Geotextiles, Fibre
reinforced composites etc., and Aramid based reinforcement Fabric for
hoses, each tailor-made for the respective application.
2018-19 Innovation Novel products involving Nanotechnology are also developed by this
Technical Textiles Business (TTB) R&D centre in close association with
leading Academic and Research Institutes in India and abroad for various
research projects. TTB-R&D also works in close collaboration with major
customers for joint developments in the field of tyre cords, belting Fabrics
and other Mechanical Rubber Good reinforcements.
SRF Limited offers a wide range of high-performance reinforcements covering both nylon and polyester yarns
and Fabrics for diverse non-consumer and lifestyle applications. The company is among the large manufacturers
of technical textiles in India. It also enjoys a global leadership for most of the products under this business.
Apart from India, it has set up manufacturing plants for technical textiles in Thailand and South Africa. SRF's
product basket for technical textiles contains Nylon tyre cord Fabrics, Polyester tyre cord Fabrics, Belting
Fabrics, Coated Fabrics, Laminated Fabrics, Fishnet Twines and Industrial Yarns.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Name of company: SRF Limited
Address: Block-C, Sector-45, Gurugram, Haryana, India
Telephone: +91-124-4354400
Email [email protected]
8.6 Strata Geosystems (India) Private Limited
Key Executive (s) & Designation Narendra Dalmia (CEO)
Primary business Manufacturing of Geogrids and Geocells
Manufacturing facilities in India, USA, UK, Brazil
Global exports
Manufacturing Manufacture StrataGridTM (Geogrid) and StrataWeb®(Geocell)
Construction Construction of RS Walls in India.
Design One of the important verticals for the company is design consultancy. It
has designed over 1,000 projects globally, following all global design
standards and software. Strata has a highly qualified team of engineers
which specialises in Geotechnical Engineering.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Geotech Product - StrataGridTM, StrataWeb®

(2020) (2020)
8.6.6 Business performance in last three years (Rs. Crores)

Net Sales 156.70 277.30 307.00
Net Profit 11.10 19.70 23.30
Return on Capital employed 15% 14% 14%
8.6.7 Key strategic moves and developments by company/group related to

Technical Textiles

2016 Focus on development of Indian codes for Launched by IRC, RDSO and BIS between 2019-21
geosynthetics
2019 Start new geogrid manufacturing facility with This helped exports and acceptance across 25 countries
state-of-the-art technology and triple
capacity
2020 Patent solutions Filed 2 patented solutions for RS walls to increase market
share and optimise solution costs
2021 Expand product portfolio rapidly Leverage existing sales channels
Draft standards and guidelines Contributed towards formulation of BIS standards for
geosynthetics, contributed towards formulation of IRC
guidelines for use of geosynthetics in roads, taking on
pilot projects to showcase and promote technology.
Establish India’s largest geogrid and geocell Setup the largest geogrid and geocell facility in India and
facility top 3 in the world
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Strata Geosystems (India) Private Limited is a non-government company, incorporated on 15 Sep, 2004. It is a
leading provider of sustainable, eco-friendly and cost-effective soil reinforcement technology and geotechnical
solutions in India. According to the company sources, it is their constant endeavour to build trust and surpass
customer expectations with high quality geosynthetic products for infrastructure sector.
Name of the Company: Strata Geosystems (India) Private Limited
Address: Sabnam House, Plot No. A – 15/16, Central Cross Road B, Behind MIDC, Andheri (E), Mumbai–
400093, India
Telephone: +91-22-40635100
8.7 Supreme Nonwoven Industries

Private Limited
Year of Incorporation 1986-87
Key Executive (s) & Designation Mohan Kavrie (CEO), Amit Kavrie (MD)
Primary business Nonwoven Fabrics, Automotive Interior Trim Components

Manufacturing facilities in India and Thailand
Exports to Southeast Asia
R&D expenditure during 2020 Data not available
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Non-woven for all kind of vehicles, The company is a supplier of interior trims and NVH components as
industry and other uses well as filters for many applications
Mobitech Supplier of interior trims such as Moulded Carpets, Headliners, Trunk Compartment
Trims and Package Trays, and NVH components
Meditech Disposable Surgical Cloth, Disposable Facial Gowns, Disposable Patient Gowns,
Disposable Surgeon Aprons, Disposable Bedspreads and Disposable Surgeon Caps
Geotech Supertex, Geosynhetic solution for erosion control, filtration, reinforced earthwalls,
paving, solid waste separation etc.
Clothtech Interlining
Indutech Industrial Filters for dry as well as wet filtration
8.7.4 Sources of revenue share (2020) and 8.7.5 Revenue share by segment (2020):
Data not available
8.7.6 Business performance in last three years* (Rs. Crores)

Net Sales 259.17 270.51 220.37
Net Profit 10.3 8.34 5.34
* CMIE Prowess Database

2016 Market Supreme Treon has 12 manufacturing plants strategically located across automotive
dominance manufacturing hubs in India and supplies to more than 100 different passenger and
in Mobiltech commercial vehicle models.
First company in India to develop and introduce practically all the products of
nonwoven in the market. Command 50% share in the Automotive OEM’s market.
2016 Expansion 100% ownership of Supreme-Treves, which was established in 1996 as a joint venture
through between Supreme Nonwovens and Trèves of France, a Tier 1 system supplier of
M&A automotive interior trim and noise, vibration and harshness (NVH) components.
2020 Exapansion Acquired the joint venture between Supreme Treon Pvt. Ltd. and Feltol Thailand
through Manufacturing Company Limited
M&A
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Supreme Nonwoven Industries Private Limited is the largest and most diversified Nonwovens company in India.
It provides products and services across the value chain of nonwovens. As per the company sources, it is the
largest supplier of interior trims and NVH components with strong design, development, tooling, engineering
and manufacturing capabilities. It is a supplier for over 15 large manufacturing companies of automobiles in
India. The company produces more than 7000 products.
Name of the Company: Supreme Nonwoven Industries Private Limited
Address: Supreme House-110, 16th Road, Chembur, Mumbai – 400071, Maharashtra, India
Telephone: +91-22-25208822
8.8 Tata Advanced Systems Limited
Masood Hussainy (Head, Aerostructures and Aero-Engines), Nishant Khurana
Key Executive (s) & Designation
(Head, COE - Composites and Metallics), Abhishek Sharma (AVP, Finance)
Manufacturing of Aerospace grade Composite Parts, Light Bullet Proof Jackets,
Primary business
Vehicle Armouring Solutions
Manufacturing facilities in Karnataka and Telangana
Exports to USA, EU, SAARC, ASEAN and African countries
Number of Employees 1080+
_______________________________________________________________________________________________

___________________________________________________________________________________________________
International Aerospace Fabrication of Composite Parts for different Aircraft platforms, Metal-
Composite Assemblies
Space Fabrication of composite parts and assemblies for satellite and launch
vehicles
Defence (Personal & Vehicle Armouring Light Weight Bullet Resistant Jackets, Light Weight Bullet Resistant Combat
Solutions) Helmets, Protection parts for Armoured Vehicles
Mobitech 1. Bullet Proof SUVs (Steel + Composite Armour)
2. Bullet Proof Vehicle for Armed Forces
3. Light Weight Advanced Composite Armour
4. Side Mine Blast Protection
5. Composite Aircraft Parts for major OEMs/Super Tier 1s like Boeing, Spirit, GKN, FACC, CTRM,
NAL, VSSC etc.
Protech 1. Flexible Ballistic Shield Cover for personnel and vehicle protection
2. VIP Concealable BR Vest
3. Buoyant BR Jacket Outer Carrier
4. Assault BR Jacket Outer Carrier
5. Bomb Blanket Cover (delivered 300 nos.)
6. Anti-ballistic Aramid Carpets for vehicle floor protection
7. Delivered more than 250 nos. to Tata Motors Defence Land systems (light armoured vehicles)

(2020) (2020)
Exports, 86% Aerospace, 98%
Domestic, 14% Defence, 2%
_______________________________________________________________________________________________

___________________________________________________________________________________________________

Net Sales 397.41 400.87 363
Net Profit 57.21 58.49 36.4

In-house development of Light Assault BR Jacket Outer Carrier
2006 - till Weight and cost-effective Bullet
date Delivered more than 2,50,000 nos. BPJs to Indian Army,
Resistant Jackets Outer Carrier to
State Police forces, private customer
cater to domestic market
2012 - till Buoyant BR Jacket Outer Carrier
date
Delivered 9000 nos. to Indian Navy, Coast Guard
Manufacturing completed for 4500 nos. BRJ to Indian Navy,
under inspection by DGQA(N)
2015-16 VIP Concealable BR Vest
Delivered 3000 nos. to Government & private customers
2015- till In-house development of Protection Delivered 300 Bomb Blanket Covers
date equipment for threats against Bomb
Anti-ballistic Aramid Carpets for vehicle floor protection.
(100 gms TNT) and hand grenades
(HE-36) Delivered more than 250 nos. to Tata Motors Defense Land
systems (light-armored vehicles)
It is the first company in India to develop a light weight Bullet
Proof Jacket in collaboration with the Indian Army
It has developed small arm protection parts for Arjun Main
Battle Tank with CVRDE, DRDO, Ministry of Defence
The company annually delivers 32000+ Aircraft & Space
composite components at peak rates to top OEMS & Super
Tier 1 firms like National Aerospace Laboratories (NAL),
Vikram Sarabhai Space Centre (VSSC), Boeing, Spirit, FACC
AG, GE Aviation, Composites Technology Research Malaysia
(CTRM) & Collins Aerospace
Flexible Ballistic Shield Cover for personnel and vehicle
Joint development of protection
protection
equipment at par with international
2019-20
standard for promoting in domestic &
international market Delivered 1000 nos.
The Bengaluru based manufacturing facility of Tata Advanced Systems Limited (TASL) which now is the
Advanced Material Division but earlier was a separate company Tata Advanced materials Limited (TAML)
commenced its commercial operations in 1993. It has been a pioneer of Composite manufacturing & Solutions
in India, catering to the demands of Aerospace, Space & Defence (Personal & Vehicle Armouring Solutions) for
top OEMs and Super Tier-1 firms all across the world since 1989. It focused solely on design, development
_______________________________________________________________________________________________

___________________________________________________________________________________________________
and manufacturing of Personal Armour & Defence products from 1993-2006. In 2007 it added Aerospace as a
new market for its business. It has more than 900 employees which include young & skilled engineers working
at the TASL Bengaluru facility.
Name of company: Tata Advanced Systems Limited
Address: No.10, Jigani Industrial Area, Anekal Taluk, Jigani, Bengaluru- 560105, Karnataka, India
Telephone: +91-80-66955500, +91-11-66222666
8.9 Techfab (India) Industries Limited
Key Executive (s) & Designation Anant Kanoi (CEO)
Primary business Geosynthetics Product Manufacturer
Manufacturing facilities in Dadar and Nagar Haveli and Daman
Geographical Presence Offices across India and abroad
R&D expenditure during 2020 Data not available
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Segment Description
TechGrid Knitted and Polymeric Coated Polyester Geogrids
TechGlass Bitumen Coated Fiberglass Grids
TechGeo Nonwoven Geotextiles
TFI 1000 Series Woven PP Multifilament Geotextiles
TechDrain - Drainage composite Geo Composites
TECHFAB Metal Gabions/Matress/Netting Metal Gabions
TGC Reinforced Nonwoven Composites
TechGlass AIC AIC Asphalt Reinforcement Composites
TechPave Nonwoven Paving Fabrics
TechGrid PP Biaxial PP Extruded Biaxial Geogrid
TechStrip Polymeric Strip Polymeric Strips
TechFab Polypropylene Staple Fibres
TechCell Geocells
Geotech Techgrid, Techgrid PP, TechStrap Polyemetric Strip, TechGlass, TechGlass AIC,
TechGeo Needle Punched Nonwoven Textile, TechPave, TechDrain, TechTube
Geotextile Tubes, TGC, TFI 3000, TechCell, TechFab Metal Gabions

(2020) (2020)
Geotech Products and Solutions: 100%

Domestic,
86%
Exports,
14%
_______________________________________________________________________________________________

___________________________________________________________________________________________________

Net Sales 186.1 193.71 233.6
Net Profit 10.31 14.23 20.99

2015-20 New and innovative product The company has developed DMS, Advanced Data Management System
development to support design document database for complex projects having
multiple structures. It has acquired Emergia Aerospace during 2013. It
has complete product range for various applications which is GreenPro
Ecolabelled recognised by Global Ecolabelling Network (GEN).
TechFab India Industries Limited was founded in 2003, with the objective of providing world class geosynthetic
products and services to enable owners, consultants and contractors to design and implement reliable,
economic and easy to construct solutions for a wide range of geotechnical, transportation, hydraulic and
environmental related problems.
Name of company: Techfab (India) Industries Limited
Address: 712, Embassy Centre Nariman Point Mumbai, 400021, Maharashtra, India
Telephone: +91-22-22876224
_______________________________________________________________________________________________

___________________________________________________________________________________________________
8.10 Welspun India Limited
Key Executive (s) & Designation B.K. Goenka (Chairman), Dipali Goenka (CEO), Rajesh R Mandawewala (MD)
Primary business Home Textiles, Advanced Textiles, Flooring Solutions, Pipes, Steel and Infrastructure
Manufacturing facilities in India, USA and South Africa
Geographical Presence Offices across India and abroad
Number of Employees 20,000
Segment Description
Bedding Solutions Bed sheets, Comforters
Bath Solutions Towels, Bathrobes
Flooring Solutions Carpet tiles, Wall to wall carpets, LVT
Advanced Textile Spunlace, Wet wipes, Needle punch
Hometech Wadding for home textiles, Comforters, Mattress Pads
Indutech Industrial filter Fabrics, Liquid filter Fabrics, HVAC, Automotive filter Fabrics, Fabric for Composites
Meditech Spunlace Nonwoven Fabrics for different applications -Cleaning, Medicated Cloth, Cosmetics, Baby Wipes,
Facial Wipes, Bathing Wipes, Facemasks
Mobitech Nonwoven Needle punch Fabrics for Automotive applications
Nonwoven Fabrics for Personal protection and safety textiles like Thermal Liners for fire and safety,
Protech Medical Gowns, Masks)
_______________________________________________________________________________________________

___________________________________________________________________________________________________

(2020) (2020)
Data not available

Exports, 88%
Domestic, 12%
8.10.6 Business performance in last three years for overall textiles (Rs. Crores)

Net Sales 4995.87 5395.26 5323.57
Net Profit 304.11 141.77 474.89
Note- Net sales from technical textile products for 2020 was Rs. 233.84 Crores.

2021 Meditech Spunlace fabric for Hygiene application like wet wipes, face mask, Bed bath wipes and
disinfectant wipes
Nonwoven fabric development in direction with SUP (Single use plastic)
Nonwoven fabric in direction to ESG concept
Addition of Spunlace Capacity in Telangana
Welspun Group is one of India's fastest growing global conglomerates with businesses in Line Pipes, Home
Textiles, Infrastructure, Warehousing, Steel, Oil & Gas, Advanced textiles and Flooring solutions. The company
submits that at Welspun, they yearn to be the most comprehensive strategic partner and solution provider,
keeping their consumers at the core.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Name of company: Welspun India Limited
Address: 6th Floor, Kamala Mills Compound, Senapati Bapat Marg, Lower Parel, Mumbai 400 013, Maharashtra,
India
Telephone: +91-22-66136000, 24908000
_______________________________________________________________________________________________

9. Domestic & Global
Markets of Technical
Textiles
9.1 Background
The textile industry has been undergoing continuous and rapid transformation resulting in ever newer areas of
innovations to meet ever changing requirements of individual and institutional consumers. With the increasing
quest to find uses for textiles other than aesthetic, a new category known as Technical Textiles has emerged.
These are defined as textiles that are designed for non-aesthetic applications. Different kinds of technical
textiles are created for meeting various functional requirements due to characteristic physical properties which
make them appropriate for intended applications.
Technical textiles are known by different terms such as Functional Textiles, Industrial Textiles, Performance
Textiles, Engineering Textiles, Invisible Textiles and Hi-tech Textiles. Technical Textiles are non-aesthetic but
highly versatile textiles, manufactured using natural as well as man-made fibres. These synthetic polymers
have huge potential and abundant functionality that outperforms natural fibres.
The global Technical Textiles market is expected to grow at a CAGR of 5.06% between 2020 and 2025. Rising
awareness about benefits of technical textiles is likely to enhance their demand across end-use industries
including medical, construction, sports, packaging, agriculture etc. India can be a significant force in the
rapidly evolving global technical textiles market and hence there is a critical need for conducting a detailed
analysis of domestic as well as international market. Such an analysis will help in identifying the strengths and
weaknesses, bridge the gaps and influence the overall demand of the Indian technical textiles industry.
Technical textiles are classified into 12 segments as per their application; these segments are presented as
follows:
1. Agrotech: Textiles used in agriculture, horticulture, fishing and forestry. Examples- Shade nets, crop
covers, fishing nets etc.
2. Buildtech: Textiles used in construction. Examples- Scaffolding nets, awnings, wall coverings etc.
3. Clothtech: Technical textiles for clothing applications such as fabric treated under pressure and high
temperature. Examples- Coated laces, interlinings, zip fasteners, labels etc.
4. Geotech: Permeable fabric woven or non-woven used for confinement/ separation, reinforcement,
filtration and drainage. Examples- Geotextiles, Geomembranes, Geostrips, Geo-grids etc.
________________________________________________________________________________________________

Section 9: Domestic & Global Markets of Technical Textiles
___________________________________________________________________________________________________
5. Hometech: Textiles used in a domestic environment and interiors. Examples- Fibre fill, blinds fabrics,
mosquito nets, furniture fabrics etc.
6. Indutech: Textiles used for chemical and electrical applications and textiles related to mechanical
engineering. Examples- Conveyor belts, bolting cloth, coated abrasives, composites etc.
7. Meditech: Combination of textile technology and medical sciences has resulted into a new field called
medical textiles. Examples- Diapers, wipes, surgical sutures, hernia mesh, artificial ligaments etc.
8. Mobiltech: Textiles used in the manufacture of automobiles, railways and aircraft. Examples- Tyre
cord, seat belt webbing, airbag, insulation felts, seat covers etc.
9. Oekotech: Textiles used in environmental protection applications. Examples- Geomembranes, geo-

synthetic clay liners etc.
10. Packtech: Textiles used in packaging, silos, containers, bags, canvas covers, marquee tents.
Examples- Leno bags, soft luggage, jute hessian and sacks, shopping bags etc.
11. Protech: Textiles that are used in protection against heat, flame and radiation for fire fighter clothing,
against molten metals for welders, for bullet proof jackets etc. Examples- Bullet proof jackets, fire
retardant apparel, chemical protective clothing etc.
12. Sportech: Shoes, sports equipment, flying and sailing sports, cycling, winter and summer sports,
indoor sports wear. Examples- Sport composites, artificial turfs, parachute fabrics, sleeping bags etc.
A detailed market analysis of technical textile industry and various segments has been done in this chapter.
The market for technical textiles in India is growing at a rapid pace, even as it currently contributes a relatively
modest portion i.e. 17 percent of total textile market in India. The market size of textile industry in India is Rs.
7,11,409 Crores while that of technical textiles is Rs. 1,22,943 Crores (US$ 18,879.45 Million) during 2019-20.
The share of technical textiles in the total textile industry is expected to reach 28% by 2024-25.
The growth observed in the Indian economy and country’s relatively untapped domestic market has fuelled
demand for technical textiles. The availability of young and cheap manpower and readily available strong
textile value chain has improved prospects for ramping up the production capacities for technical textile
________________________________________________________________________________________________

___________________________________________________________________________________________________
industry in India. These characteristics of the ecosystem have created attractive opportunity for technical
textiles in India. As per the information received from the field research as well as consulting the industry
practitioners and experts, the forecast arrived at by IIT Delhi suggests that the market for technical textiles in
India will grow in value from Rs.122,943Crores (US$ 18,879.45 Million) in 2019-20 to Rs. 182,742.15 Crores
(US$ 28,062.37 Million) in 2024-25.
The segment-wise data is presented in Table 9.1 as follows:
Table 9.1: Market size of technical textile segments in India - Rs. Crores (US$ Billion)
No. Technical Year Year Segment as Segment as CAGR %
textile 2019-20 2024-25 % of Total % of Total (2019-20 to
Segment (Estimate) (Forecast) (2019-20) (2024-25) 2024-25)
(Forecast) (Forecast)
1 Agrotech 1,890 (0.29) 3,246 (0.50) 1.54 1.78 11.42
2 Buildtech 5,008 (0.77) 8,239 (1.27) 4.07 4.51 10.47
3 Clothtech 8,205 (1.26) 11,411 (1.75) 6.67 6.24 6.82
4 Geotech 2,050 (0.31) 4,483 (0.69) 1.67 2.45 16.94
5 Hometech 12,352 (1.90) 17,145 (2.63) 10.05 9.38 6.78
6 Indutech 12,821 (1.97) 23,660 (3.63) 10.43 12.95 13.04
7 Meditech 7,861 (1.21) 12,550 (1.93) 6.39 6.87 9.81
8 Mobiltech 11,164 (1.71) 18,274 (2.81) 9.08 10.00 10.35
9 Oekotech 488 (0.08) 972 (0.15) 0.40 0.53 14.76
10 Packtech 50,592 (7.77) 67,332 (2.81) 41.15 36.85 5.88
11 Protech 3,148 (0.48) 5,119 (0.79) 2.56 2.80 10.21
12 Sportech 7,364 (1.13) 10,312 (1.58) 5.99 5.64 6.96
1,22,943 1,82,742
Total 100 100 8.25
(18.89) (28.06)
The segments likely to grow at the fastest rates (at rates faster than a CAGR of 10%) are Oekotech, Protech,
Geotech, Meditech, Indutech, Agrotech and Buildtech. Packtech, which has been a mainstay of the domestic
technical textiles market is expected to experience a moderated rate of growth and a similar growth trend is
expected for Mobiltech. The extent and nature of success of India’s National Technical Textile Mission is likely
to change these forecasts depending on the response of the market to interventions made under the mission.
The size of technical textiles market in India is a small proportion (8.7%) of the market size of technical
textiles in the world in 2019-20. It is expected that by 2024-25, the value of consumption (calculated at
constant foreign exchange rates) of technical textiles in India is likely to be 10.06 percent of global
consumption of technical textiles in 2024-25. The global market for technical textiles is expected to grow from
US$ 217.80 billion to US$ 278.84 billion at a CAGR of 5.06% during the period 2020-25.
The segment-wise data of world market is presented in table 9.2 as follows:
________________________________________________________________________________________________

___________________________________________________________________________________________________
Table 9.2: Market size of technical textile segments in the world (US$ Million)
No. Technical Year 2019-20 Year 2024-25 Segment as Segment as CAGR %
textile (Estimate) (Forecast) % of Total % of Total (2019-20 to
Segment (2019-20) (2024-25) 2024-25)
(Forecast) (Forecast)
1 Agrotech 9,847 11,749 4.52 4.21 3.60
2 Buildtech 13,923 19,472 6.39 6.98 6.94
3 Clothtech 11,656 13,980 5.35 5.01 3.70
4 Geotech 7,445 9,753 3.42 3.50 5.55
5 Hometech 19,654 24,687 9.02 8.85 4.67
6 Indutech 29,157 37,204 13.39 13.34 5.00
7 Meditech 25,214 34,736 11.58 12.46 6.62
8 Mobiltech 36,345 44,779 16.69 16.06 4.26
9 Oekotech 1,363 2,635 0.62 0.94 14.08
10 Packtech 27,597 33,744 12.67 12.10 4.10
11 Protech 11,187 14,862 5.14 5.33 5.85
12 Sportech 24,416 31,237 11.21 11.20 5.05
Total 217,805 278,837 100 100 5.06
It is evident from the forecast presented in the table above that Geotech, Protech, Sportech and Oekotech are
the four segments which are likely to grow at a relatively higher rate (CAGR > 5%) in terms of value of
technical textiles consumption during the period 2020-25. Mobiltech, Indutech, Meditech, Packtech and
Sportech will constitute a major share of the market value of technical textiles.
The market analysis of technical textiles that follows in this section has been presented at the level of
products in each of the 12 technical textile segments. The products in Oekotech segment are common with
that of other segments such as Geotech. Therefore, analysis of Oekotech segment could not be shown
separately at a product level. The products from different segments that have been identified (after
consultation with industry experts) for analysis have been chosen because of the perceived moderate to high
possibility of success for Indian industry. Some of these products currently have a small domestic market but
a large global market and therefore present opportunities for India’s technical textiles manufacturers.
According to the objectives specified for the present study, analysis of such products is necessary as it serves
as a global trend guide, both, to policy makers and to Indian entrepreneurs.
The sources of information for determining the current market size and developing the forecast ranged from
primary survey of a sample of Indian technical textiles product manufacturers, raw material suppliers,
machinery manufacturers, industry experts for their assessment and opinions, study of various national and
international reports, including referring market research reports by leading industrial market research
agencies of the world. Some of these market research agencies whose reports were referred extensively for
extracting global market value data are listed as follows:
________________________________________________________________________________________________

___________________________________________________________________________________________________
1. Grand View Research Inc.
2. Mordor Intelligence Inc.
3. Research and Markets Inc.
4. Markets and Markets Research Private Ltd.
5. Market Watch (www.marketwatch.com)
6. Transparency Market Research Pvt. Ltd.
7. Reports and Data (Marketysers Global Consulting LLP)
8. Fortune Business Insights Pvt. Ltd.
9. Data Bridge Market Research (DBMR) Pvt. Ltd.
10. Allied Market Research
In addition to the relevant product, segment and industry based research reports published by the agencies
mentioned above, the reports and documents prepared by Ministry of Textiles, Government of India (Annual
Reports for financial years 2018-19, 2019-20 and 2020-21), ICRA Management Consulting Services Limited
(Baseline survey of the Technical Textile industry in India, 2016), KPMG-FICCI (Technical textiles: Growth
engine of Indian textiles sector (2019), Technical Textiles: Emerging Opportunities and Investments (2021),
Invest India, Exim Bank of India (Enhancing Exports Of Technical Textile (2018)), Wazir Advisors-FICCI
(Technical Textiles: Towards a Smart Future (2016), World bank (World Demand Prospects for Jute (1987),
US Department of Commerce (2016 Top Markets Report: Technical Textiles, A Market Assessment Tool for
U.S. Exporters), BCC Research (Geosynthetics: Materials, Applications and Markets (2015), CII (Strategic
Roadmap for Geotextiles in India (2020). In addition to the above, the valuable assessments made by industry
associations such as Indian Technical Textiles Association (ITTA), Confederation of Indian Industry (CII) and
Federation of Indian Chambers of Commerce & Industry (FICCI) have also been incorporated in the analysis.
The market analysis has been illustrated with the help of appropriate graphs and tables which are placed
alongside the information pertaining to each of the respective products and the application segments. The
segment-wise market analysis is described in the sections that follow.
9.2 Agrotech
Agrotech or Agro Textile is used to classify woven, nonwoven and knitted fabrics applied for agriculture &
horticulture uses. They prevent soil from drying out, increase crop yield, improve product quality and protect
farmers from exposure to harmful pesticides and chemicals.
Major technical textiles products under Agrotech segment are as follows:
1. Anti-hail and Anti-bird Nets 4. Mulch Mats

2. Crop Covers 5. Shade Nets
3. Fishing Nets
________________________________________________________________________________________________

___________________________________________________________________________________________________
Figure 9.1: Percentage contribution of Agrotech products in the domestic market (2019-20)
Fishing nets,
77.62%
Others,
1.89%
Anti-hail and anti-bird Shade nets,
nets, 17.57%
1.38% Crop covers, Mulch mats,
0.16% 1.38%
Fishing nets constituted the largest share (77.62%) of the Indian Agrotech market in 2019-20, followed by
shade nets (17.57%), mulch mats (1.38%), anti-hail & anti-bird nets (1.38%). Crop covers also hold a small
share (0.16%) of the Indian market.
Figure 9.2: Percentage contribution of Agrotech products in the international market (2019-20)
Mulch mats,
26.96%
Shade nets,
19.61%
Fishing nets,
26.54%
Others,
11.01%
Crop covers,
1.62% Anti-hail and anti-
bird nets,
14.26%
Mulch mats (26.96%) and fishing nets (26.54%) constitute the largest share in the international market.
________________________________________________________________________________________________

___________________________________________________________________________________________________
Figure 9.3: Production vs. Consumption of Agrotech segment in the domestic market (Rs. Crores)
3,614
3,285 3,246
2,987
2,877
2,715
2,589
2,468
2,244 2,331
2,098
1,890
2019-20 2020-21 2021-22 (E) 2022-23 (E) 2023-24 (E) 2024-25 (E)
Production Consumption
It is evident from figure 9.3 that the production of Agrotech products (Rs. 2,244 Crores in 2019-20) in India
exceeds their consumption (Rs. 1,890 Crores in 2019-20). This presents India with the possibility of exporting
its surplus.
Table 9.3: Agrotech - World and India market size 2019-20
Product Name World (US$ Million) India (Rs. Crores) India’s share
Anti-hail and Anti-bird Nets 1,404 26 0.23%
Crop Covers 160 3 0.28%
Fishing Nets 2,613 1,467 8.60%
Mulch Mats 2,655 26 0.15%
Shade Nets 1,931 332 2.64%
Others 1,084 36 0.51%
Total 9,847 1,890 2.95%
9.2.1 Anti-Hail and Anti-Bird Nets

Anti-hail and anti-bird nets are mesh products which are woven from HDPE yarn or are a combination of HDPE
monofilament and tape in knitted form, stabilised against UV rays. These are designed in a way that allows
light and air but stops birds and hail from reaching plants and crops. These are used to protect fruit trees and
fruit crops like apples, strawberries, and litchi, etc. Analysts predict that the demand for agriculture nets will
remain high in countries such as India and China because of large areas under agriculture.
________________________________________________________________________________________________

___________________________________________________________________________________________________
There is very little trade of anti-hail and anti-bird nets to and from India. Some of the major manufacturers
are Netlon India Limited, Garware Technical Fibres Ltd., Kwality Nets Manufacturing Company Ltd. and B&V
Agro Irrigation Co. Ltd. Main global manufacturers are KARATZIS S.A., Jinguan Net Co. Ltd., Internet France
(Thailand) Co. Ltd. etc.
In 2019-20, the Indian market for anti-hail and anti-bird nets was worth Rs. 26 Crores as compared to the
global market which was worth US$ 1,404 Million. The Indian market is expected to grow at a CAGR of 14%
and is likely to be valued at Rs. 50.06 Crores by 2024-25. The global market is expected to grow at a CAGR of
2% and is expected to be worth US$ 1,550.13 Million by 2024-25.
9.2.2 Crop Covers

Crop covers provide protection to the crops from insects and create a micro-climate for crops by maintaining a
warmer and humid micro-environment. The polyethylene monofilament meshes are made up of clear plastic
(polythene) or spun-bonded polyester and can be woven, nonwoven or knitted.
Asia Pacific region led by China, India and Japan has witnessed a significant growth owing to large scale of
agricultural operations at the national level. Rising demand for high crop yield and changing climatic
conditions have motivated the farmers to use these covers for crop protection. In the future too, this may
drive the nonwoven crop cover market trends in the region.
Key manufacturers of crop covers in India are Sidwin Fabrics Pvt. Ltd., Alpha Foam Pvt. Ltd., K T
International, Surya Tex Tech, Admire Fibretex India Pvt. Ltd, Jill Mill Nonwoven Pvt. Ltd. and CTM Technical
Textiles Ltd. Some of the prominent global players dealing with nonwoven covers are Mitsui Chemicals, Berry
Global and Kimberly Clark Corp.
The crop covers market in India is at a nascent stage. India had a market size of around Rs. 3 Crores in 2019-
20. However, it is likely to grow at a CAGR of 4% for the next five years to be worth Rs. 3.65 Crores in 2024-
25. The global crop covers market was worth US$ 160 Million in 2019-20 and is expected to grow at a CAGR
of 3% for the next five years and have a value of US$ 185.48 Million.
9.2.3 Fishing Nets

Fishing nets are an important product of technical textiles which are used for marine and inland fishing by
fishermen, fishing trawlers and boats. They are usually made of polyamide (PA), polyester (PES), polyethylene
(PE), and polypropylene (PP) fibres. Fishing nets are made from fibers woven in a grid-like structure, formed
by knotting a relatively thin nylon thread. Nylon fishnet accounts account for over 65-70% of the total fishnet
consumption world over. HDPE constitutes about 25-30% of the total fishnets and PP/Polyester constitutes
the rest of 5-10% of the total demand globally.
Asia Pacific region is the largest consumption centre for fishing nets, accounting for 44% of global
consumption. It is a fragmented market due to the presence of many local manufacturers. Increasing
regulations on fishing and anti-dumping duties act as roadblocks in the fishing net fibre market.
________________________________________________________________________________________________

___________________________________________________________________________________________________
About 65% of the country’s total production of

Fishnets is produced in Tamilnadu. Of the total
550 fishing nets manufacturing units in the
country, Tamil Nadu has around 300-350 units
and many of these are in Nagercoil. Garware
Technical Fibres Ltd. is the largest manufacturer
and exporter of fishing nets from India. Other
Indian manufacturers are Arthi Enterprises,
Aswan Fish Net and Cham Synthetics Pvt Ltd.
Some of the major international players of fishing

nets are BASF SE, AdvanSix Inc., TORAY
Industries Inc., Royal DSM N.V., Indorama
Ventures (Brazil), Amco Polymers and Formosa
Chemicals.
India’s share in the global fishing nets market stood at 8.6% with a market size of Rs. 1,467 Crores. It is
estimated to grow at a CAGR of 11% to reach Rs. 2,471.98 Crores till 2024-25. The market size for the
world as a whole was at US$ 2,613 Million and is expected to grow at a CAGR of 3.58% to be valued at
US$ 3,115.44 Million in 2024-25.
9.2.4 Mulch Mats

Mulch mats are hairy mulching discs that suppress weed growth, lower water loss from the soil surface and
slow down slugs and snails. Mulch mats are used to keep fruits off the soil. This decreases fruit rot and keeps
the fruit and vegetables clean. This is particularly beneficial for several horticultural crops including
strawberries. Mulch mats are made up of LLDPE, HDPE, LDPE, polypropylene and wool.
Domestic manufacturers of mulch mats are small-scale industries, mostly located in Gujarat. Major Indian
manufacturers are Neo Corp International Ltd., Alpha Foam Pvt. Ltd., Fiberweb India, Shivam Polymers,
Climax Synthetics Pvt. Ltd., Creative Polymers Pvt. Ltd. and Essen Multipack Ltd. The global market is
dominated by players such as BASF SE (Germany), The DOW Chemical Company (U.S.A.), Berry Plastics
Group, Inc. (U.S.A.), AEP Industries Inc. (U.S.A.) and RKW Group (Germany).
The global market for Mulch Mats stood at US$ 2,655 Million in 2019-20. It is expected to grow at a CAGR of
4% and likely to be US$ 3,230.21 Million in 2024-25. The Indian market for Mulch Mats was Rs. 26 Crores in
2019-20. It is forecasted that it will grow at a CAGR of 6.6% and expand to Rs. 35.79 Crores by 2024-25.
9.2.5 Shade Nets

Shade nets are synthetic fibre nets which are made up of polypropylene or HDPE in knitted or woven form.
They provide protection to plants from insects and extreme weather conditions, reduce water evaporation,
and provide shade to greenhouses. Shade nets are commonly used in organic food industries these days.
They are also used for covering of swimming pools and parking lots.
China is a major exporter in terms of volume and European nations are major users of shade nets in terms of
consumption. Some of the key manufacturers and exporters of shade nets in India are Neo Corp. India Limited,
________________________________________________________________________________________________

___________________________________________________________________________________________________
Netlon India Limited, Garware Technical Fibres Limited, Rishi Techtex Limited and UNIMIN India. Major global
manufacturers are ACE Geosynthetics Enterprise Co. Ltd., Acme Bag Company and Baliki Holdings.
The global market for shade nets was US$ 1,931 Million whereas the size of Indian market for shade nets was
worth Rs. 332 Crores in 2019-20. The global market is expected to grow at a CAGR of 6% whereas the Indian
market is expected to grow at a CAGR of 14.33% for the next five years. The market size is expected to be
Rs. 648.54 Crores for India and US$ 2,584.11 Million for the world in the year 2024-25.
9.3 Buildtech
The textile components and fabrics used in the building and construction industry are called building technical
textiles or Buildtech.
Technical textile products under Buildtech segment are as follows:
1. Acoustic Fabric
2. Architectural Membranes
3. Awnings and Canopy
4. Canvas Tarpaulin
5. HDPE Tarpaulin
6. Hoardings/Signages
7. Scaffolding Nets
Figure 9.4: Percentage contribution of Buildtech products in the domestic market (2019-20)
Canvas tarpaulin, 7.23% HDPE tarpaulin,

51.38%
Hoardings and
signages (flex
banner), 19.34%
Awnings and
Architectural membranes, canopies, 3.2%
1.94% Acoustic
Others, 11.93% Scaffolding
fabric, 0.45% nets, 4.53%
HDPE tarpaulin constituted the largest (51.38%) share (by value) of the market of Indian Buildtech industry in
2019-20, followed by Hoardings & signages (19.34%).
________________________________________________________________________________________________

___________________________________________________________________________________________________
Figure 9.5: Percentage contribution of Buildtech products in the international market (2019-20)
Awnings and
canopies,
50.01%
Hoardings and
signages (flex
banner),
20.69%
Architectural
membranes,
Canvas tarpaulin,
5.52%
Others, 2.93%
4.02% Scaffolding nets,
2.4% Acoustic fabric, HDPE tarpaulin,
7.12% 7.31%
In the international market, Awnings and canopies constituted the largest share – half of the market of global
Buildtech industry in 2019-20, followed by Hoardings & signages (20.69%).
Figure 9.6: Production vs. Consumption of Buildtech segment in the domestic market (Rs. Crores)
8,239
7,332 7,394
6,665 6,602
6,059 5,896
5,508 5,263
5,008
4,699
4,196
2019-20 2020-21 2021-22 (E) 2022-23 (E) 2023-24 (E) 2024-25 (E)
Consumption of Buildtech products exceeds their production. India is a net importer and the gap between
production (Rs. 4,196 Crores in 2019-20) and consumption (Rs. 5,008 Crores in 2019-20) is expected to
remain almost the same in value terms for the next five years.
________________________________________________________________________________________________

___________________________________________________________________________________________________
Table 9.4: Buildtech - World and India Market Size 2019-20

Acoustic Fabric 991 23 0.35%
Architectural Membranes 769 97 1.94%
Awnings and Canopies 6,963 160 0.35%
Canvas Tarpaulin 408 362 13.62%
HDPE Tarpaulin 1,018 2,573 38.81%
Hoardings and Signages 2,880 968 5.16%
Scaffolding Nets 334 227 10.43%
Others 560 598 16.39%
Total 13,923 5,008 5.52%
9.3.1 Acoustic Fabric

Acoustic fabrics are polyester based needle punched nonwoven fabrics used for covering walls and ceilings in
multiplexes, auditoriums, music studios, stadiums etc. These fabrics help in absorbing the sound resulting in
reduction of noise. Fabric acoustic panels are installed on the wall or ceilings to absorb sound. When choosing
the fabric wrapping for the acoustic panels, many factors must be put into consideration, such as
transparency, functionality, aesthetics and so on. Moreover, transparency is the most important considerable
factor. In the recent years, nonwoven acoustic fabrics have become more popular in place of traditional glass
wool insulators. While some manufacturers can produce fabric themselves, others usually purchase from
professional fabric manufacturers. The multiplex industry is the major driver for the industry.
Major producers at global level include Armstrong, Saint-Gobain, GandS Acoustics, RPG, Abstracta, Texaa,
Acoustics First®, Ekous, CMS Danskin, Sonata Acoustic, Acoustical Surfaces, Carpet Concept, Sontext,
Soundsorba. SLALOM, Beiyang, Forgreener Acoustics, Mantex Acoustic Material etc. Global top five
manufacturers hold a share over 25 percent.
USA and Europe are the major production bases of fabric acoustic panels. USA has kept its leading place in
the global production in recent years. Europe is the largest market, with a share over 25 percent, followed by
China and North America, both combined have a share of over 40 percent
The consumption of Acoustic fabric in India was around Rs. 22.50 Crores in 2019-20. It is expected to grow
moderately at a CAGR of 6% to log in a sale of Rs. 30.11 Crores in the year 2024-25. In 2020, the global
market size for Acoustic fabric was US$ 991 Million and it is expected to reach US$ 1,117.62 Million by the end
of 2025, with a CAGR of 2.4% during the forecast period.
________________________________________________________________________________________________

___________________________________________________________________________________________________
9.3.2 Architectural Membranes

Architectural membranes are lightweight spatial structures made of tensioned membranes which aid in the
construction of buildings. They are used to construct roofs and façades, free-standing buildings, building
envelopes, skylights, indoor ceilings and/or accent enclosures. These lightweight structures are ideal for use in
a wide range of buildings such as sports and entertainment centres, commercial buildings, living and private
spaces.
The Asia-Pacific region, especially India and China, have been the most influential in giving a boost to the
global architectural membrane industry. Other geographies which have a large market for these membranes
are North America, Canada, Germany and UK.
Lucky International, B & V Membranes, Meridian Architectural Systems Pvt. Ltd. are leading players in India.
The prominent manufacturers at the international level are Serge Ferrari, Meyler and Heytex.
India’s market size for architectural membranes was Rs. 97.20 Crores in the year 2019-20. It is 2.2% of the
size of the world market which was US$ 769 Million. The growth of Indian market is forecasted at a rapid pace
of 15% and that of global market at a CAGR of about 7.7% for the next five years. The market for
architectural membranes in India is forecasted at a value of Rs. 195.51 Crores and for the world at
US$ 1,117.62 Million for the year 2024-25.
9.3.3 Awnings and Canopies

Fabric awning and canopies are the most common types of shading structures. They are durable, water &
stain resistant. Awnings and canopies are extensively used in various shops, restaurants, hotels, and
other commercial and industrial sites. While the awning is attached to the building, a canopy is a
freestanding structure. An awning or overhang is a secondary covering attached to the exterior wall of a
building as protection from overbearing sunlight or any harsh weather. Awnings may be retractable,
automatic, fixed guide, free standing or drop arm. A canopy is an overhead roof or a structure over which
a fabric or metal covering is attached, able to provide shade or shelter from weather conditions such as
sun, hail, snow and rain.
North America is a major awnings and canopies market, especially in the residential sector. Asia-Pacific region
has immense industry potential owing to growth in the construction industry, particularly in China, India, and
Australia.
Mecanco Industries and Awnings India Pvt. Ltd. are the leading producers of awnings and canopies in India.
Some of the other major manufacturers are Royal Tensile Structure Pvt. Ltd., Systems India Pvt. Ltd., Pooja
Systems, Unitech Awning and Shelter Enterprises and SRF Ltd. are the key players in the awning fabric market
in India. Players like Alps Industries and Khosla Profils also manufacture awning fabrics.
Leading global players include Eide Industries Inc., Advanced Design Awnings & Signs, Shade Structures Inc.,
and Sunair Awnings.
India’s share in the global awnings and canopies market stood at 0.39 % with a market size of Rs. 160.20
Crores during 2019-20 but it is likely to grow at a high CAGR of 15% and projected to be worth more than Rs.
322.22 Crores by 2024-25. The world market size in 2019-20 was estimated at US$ 6,963 Million and it is
growing at a CAGR of 8% for the next five years and will reach a level of US$ 10,249.87 Million.
________________________________________________________________________________________________

___________________________________________________________________________________________________
9.3.4 Canvas Tarpaulin

A tarpaulin or tarp is a large sheet of strong, flexible, water resistant or waterproof material. Traditionally
tarpaulins were made out of cotton, however currently nylon and polyester fibre fabrics are being increasingly
used in manufacturing tarpaulins. Cotton canvas tarpaulins are made out of 100% cotton single duck fabric.
They are mainly used in transportation and industrial applications where absorption capabilities are essential.
100% water-proof cotton canvas tarpaulin are used for safety from rain water, dust, direct sunlight and have
multiple uses in trucks, tents and outdoor shelter.
Main manufacturers of canvas tarpaulins in India are Gokak Textiles, SRF Ltd., Shri Arjun Tarpaulin Industry
(Salem), Calcutta Canvas Company (Chennai), Daisy Trading Company (Mumbai), Shree Tarpaulins, Mafatlal
Gujarat Industries Ltd. and Bharat Textiles Proofing Industries Ltd. The industry is highly fragmented with
many players in the unorganised sector.
India’s share in the global canvas tarpaulin market stood at 13.62% with a market size of Rs. 361.80 Crores
during 2019-20. The world market size stood at US$ 408 Million growing at a CAGR of 6.5% to reach
expected market size of US$ 561.97 Million. The likely market for canvas tarpaulin in India for the year
2024-25 is Rs. 475.10 Crores.
9.3.5 HDPE Tarpaulin

Cotton tarpaulins are being replaced by tarpaulins made of HDPE woven and laminated fabric, polyethylene
sheets, nylon and polyester fibre fabrics due to better economics than cotton canvas. PE tarpaulins with HDPE
woven fabric and LDPE lamination on both the sides are 100% waterproof. PE tarpaulins have the capability
to adopt wide range of colours unlike the canvas tarpaulin. HDPE tarpaulins are a major part of the raffia
industry.
Tarpaulin is widely used for rain water protection in sheds, transportation – trucks, other automobiles, storage
godowns, boats, snowmobiles, construction sites, lumber, grain storage, temporary storages, tents, ground-
sheets etc.
Key manufacturers of HDPE Tarpaulins in India are Gujarat Craft, Gujarat Raffia , Binni Limited , Mafatlal
Industries Ltd and NKB Extrusions Pvt. Ltd. Some of the major players operating in the global plastic tarpaulin
market are Heytex Bramsche GmbH, Sattler AG, Gia Loi JSC, KSA Polymer, Vietnam Hoa Ha Co. Ltd., Fulin
Plastic Industry Co. Ltd., MahaShakti Polycoat, JK Plastopack Pvt. Ltd., Tarpaulins Direct (UK) Limited,
Cunningham Covers, K-TARP VINA Co. Ltd., Zhejiang MSD New Material Co. Ltd. and A & B Canvas Australia,
Heytex, Shur-Co, Midwest Canvas, Gyoha, Dothan Tarpaulin Products and Sattler Group.
According to the Future Market Insights, Domestic market will grow at 12% from Rs. 2,573.10 Crores in 2020
to reach Rs.4,534.68 Crores in 2025. The global market for all types of tarpaulin was valued at US$ 2,141.2
Million in 2020 and the value share of HDPE Tarpaulin was US$ 1,018 Million. It is expected to grow at a
CAGR of 4.3% till 2025 to reach US$ 1,260.79 Million by the year 2024-25.
9.3.6 Hoardings and Signages

Hoardings and signages are made of flexible-face sign fabric, which is more commonly called flex. Flex is
made of a PVC coated polyester warp knitted fabric. This fabric is highly durable and lightweight and used for
________________________________________________________________________________________________

___________________________________________________________________________________________________
outdoor advertising, wall coverings or decorative displays, and illuminated sign canvas printings. There are
four types of flex banners – front-lit, back-lit, block-out and black/grey black.
Recently, debates about flex banners being an environmental and health hazard have emerged. Flex is not
biodegradable, and when burnt, emits toxic fumes which have serious effect on public health. This may slow
down its growth in the future.
The Indian advertising industry is projected to be the second fastest growing advertising market in Asia, after
China. The Asia Pacific region is the largest and fastest growing flex banner market.
Pioneer Flex is the largest flex banner company in India accounting for more than 50% of Indian production.
Other major manufacturers are Addica Industries LLP, Cleena Industries, and Qrex Flex.
India’s share in the global hoardings and signages market stood at 5.2 % with a market size of Rs. 968.40
Crores during 2019-20. It is growing at a CAGR of 12.15% and expected to touch Rs. 1,718.11 Crores in
2024-25. The world market size stood at US$ 2,880 Million growing at a CAGR of 7.6%. The expected market
size for the world in the year 2024-25 is US$ 4,160.11 Million.
9.3.7 Scaffolding Nets

Scaffolding netting is a lightweight fabric used to cover a building under construction in order to improve
the safety of construction site. It acts as a bi-fold barrier on a building under construction. The net
prevents debris from falling out of building and also hides away unsightly work areas giving a tidier look.
However, the application of scaffolding nets is not limited to just buildings, but people are increasingly
using them for fencing, car shade covering and as floor matting during functions due to easy and cheap
availability of the nets.
Scaffolding nets are knitted from High Density Polyethylene (HDPE) UV stabilized monofilament yarn. The UV
stabilizers added to HDPE develop resistance to UV rays thus, increasing the product life.
As per market insights, scaffolding nets contribute about 20% of the total cost of using scaffolding with
scaffolding net. The production of scaffolding nets stood at Rs. 97 Crores in India in 2012-13 which
contributed to the domestic demand.
Scaffolding nets in India is mainly manufactured by the large netting companies like Garware Technical Fibres,
Rishi Techtex Ltd., Safe nets, Kwality Nets Manufacturing Co. Pvt., Ltd. and Netlon Ltd.
The market size in 2019-20 was Rs. 226.80 Crores and the expected market size for India in the year 2024-25
is Rs. 365.27 Crores based on the expected CAGR of 10% as driven by high-rise construction industry. The
global consumption was about US$ 334 Million in 2019-20 and it is expected to grow at a CAGR of 5% to
become US$ 425.92 Million by 2024-25.
________________________________________________________________________________________________

___________________________________________________________________________________________________
9.4 Clothtech
Clothtech are the type of technical textile materials used for specific applications in making garments.
Clothtech is also used for making special purpose cloth and footwear.
Technical textile products under Clothtech segment are as follows:
1. Elastic narrow tape
2. Hook and loop fastener
3. Interlining
4. Labels and Badges
5. Shoelaces
6. Specialised and Industrial Sewing Thread
7. Umbrella cloth (TT Component)
8. Zip fastener tape (TT Component)
9. Laces and Tapes
Figure 9.7: Percentage contribution of Clothtech products in the domestic market (2019-20)
Labels and badges,

29.2%
Umbrella cloth (TT
Hook and loop
component), 2.2%
fasteners, 5.24%
Specialised and
industrial sewing
Elastic narrow tape, thread, 13.77%
20.88%
Others, 1.72%
Laces and tapes

Zip fastener tape (TT (treated/coated), 11.88%
Interlining, 11.53%
component), 3.58%
Label and badges constituted the largest (29.2%) share of the Indian Clothtech market in 2019-20, followed
by the share of elastic narrow tape (20.88%).
________________________________________________________________________________________________

___________________________________________________________________________________________________
Figure 9.8: Percentage contribution of Clothtech products in the international market (2019-20)
Labels and badges,

20.44%
Hook and loop Umbrella cloth (TT
fasteners, component),
8.15% 11.25%
Elastic narrow tape, Specialised and

17.06% industrial sewing
thread,
Zip fastener tape (TT 19.04%
component),
2.41% Others,
Interlining, 1.78%
9.27% Laces and tapes
(treated/coated),
10.6%
At the global level, labels and badges, specialised industrial sewing thread and elastic narrow tape are the
biggest products by market share at 20.44%, 19.04% and 17.06% respectively.
Figure 9.9: Production vs. Consumption of Clothtech segment in the domestic market (Rs. Crores)
11,410
10,619 10,543 10,994
9,654 9,762
8,776 9,039
8,205 8,369
7,680 7,978
2019-20 2020-21 2021-22 (E) 2022-23 (E) 2023-24 (E) 2024-25 (E)
The consumption (value estimated at Rs. 8,205 Crores in 2019-20) of Clothtech products exceeds the
production (estimated value Rs. 7,680 Crores). India is currently an importer and is going to remain one even
though the gap between production and consumption is going to reduce in value terms.
________________________________________________________________________________________________

___________________________________________________________________________________________________
Table 9.5: Clothtech - World and India Market Size 2019-20

Elastic narrow tape 1,989 1,714 13.23%
Hook and loop fastener 950 430 6.95%
Interlining 1,081 946 13.44%
Labels and badges 2,383 2,396 15.44%
Laces and tapes 1,235 975 12.12%
Specialised and industrial sewing thread 2,219 1,130 7.82%
Umbrella cloth (TT Component) 1,311 181 2.12%
Zip fastener tape (TT Component) 281 293 16.03%
Others 207 141 10.48%
Total 11,656 8,205 10.81%
9.4.1 Elastic Narrow Tape

Elastic rubber tapes are elastic inserts used in textile and apparels such as underwear, swimwear, swimsuits,
knitwear, socks, bathing caps, lingerie, and sportswear. They are highly heat resistant, have excellent
launderability, zero shrinkage in wet as well as dry conditions, have excellent wash resistance, and are
resistant to saline water, chlorine, and suntan lotions. Elastic offers better shape and fitting to the garments
making it the essential consumable item in many products. Stretching under force, staying firm for longer
duration, and regaining the original shape upon withdrawal of force is the greatest characteristic of elastic
tape leading to its multiple applications. They are either made from an elastometric yarn or yarn made from
cotton, polyester and nylon. More than 3000 varieties are manufactured which can later be classified as
woven and knitted based on the manufacturing process used.
The popularity of knitted fabric has led to an increase in the demand for elastic tape. 80-85% of elastic rubber
fabrics are consumed by the undergarments industry. The need for exact size is eliminated by the elastic
narrow fabrics, providing flexibility of sizes to the manufacturers and convenience of comfort, and fit to the
customers.
Some of the leading manufacturers in India for elastic narrow fabrics are J.V. Tapes, Viken Tape Pvt. Ltd., Sky
Industries, B R Elastic, Siddhartha Filaments, Premco Global, Tulip Elastic, Agarwal Elastic, MP Tapes, Clifton
Tapes, Kumar Elastics, Kohinoor Elastics, and Balaji Tapes. Spica Elastic Pvt. Ltd. is the largest manufacturer
of narrow elastic fabrics in India with a capacity of 18 Million metres of narrow fabrics per month. Some of the
global players are Habasit, PT. Fillattice Indah Industry, Altra, Cardinal Health, Zenith Garment Accessories Co.
Ltd., and China Besco Industrial Co. Ltd.
India’s share in the global elastic rubber tapes market stood at 13.23 % with a market size of Rs. 1,714
Crores during 2019-20 and it is likely to grow to Rs. 2,306.25 Crores by 2024-25 as it is expected to grow at
CAGR of 6.2% during this period. The global market size in 2019-20 is estimated at US$ 1,989 Million which is
likely to grow at a CAGR of 4% and reach US$ 2,419.92 Million by 2024-25.
________________________________________________________________________________________________

___________________________________________________________________________________________________
9.4.2 Hook and loop fasteners

Hook and loop fasteners are two lineal fabric strips attached to the opposing surfaces to be fastened. It
consists of two components; hook and small loops on the opposite sides which when pressed together, the
hoops catch loops and the two fabrics bind temporarily, which can be separated by pulling the surfaces. Hook
and loops are substitutes for conventional attachment methods. It provides comfort when applied in apparels
such as shirts, jackets and is a boon for the paediatric and elderly population. Based on application, the hook
& loop products market can be divided into footwear & apparel, transportation, industrial manufacturing,
medical, automotive, and others. The increasing customer spending on premium footwear for children and
sports is accelerating demand for hook and loop fasteners in the footwear industry. Other than apparels, they
are also used in bundling products for floriculture, agriculture, viticulture industry for plant and bundle ties,
arranging miles of network wire, orthopaedic and orthotic devices, as they offer efficient and adjustable joint
and limb support and in-home, and workplace maintenance and these support the demand for hook and loop
in the recent years. Asia Pacific, especially India and China are the fastest growing markets.
Sky Industries Pvt. Ltd. is the leading Indian manufacturer of hook and loop. Other leading Indian players are
Siddhartha Filaments Pvt. Ltd., Magic Fasteners Pvt. Ltd. Leading global manufacturers are Velcro BVBA (most
famous one), 3M, YKK Corporation, Dunlop Industries Inc., Paiho North America, Lovetex Industrial Corp.,
HALCO, Krahnen & Gobbers GmbH, APLIX, and Gottlieb Binder GmbH & Co. KG. Among these, Velcro BVBA.,
3M, APLIX Inc., Kuraray Group, and YKK Corporation accounted for a significant portion in the global market.
India’s market size of Rs. 430 Crores for the hook and loop fasteners market stood at 6.95% of global market
during 2019-20. It is likely to grow at a CAGR of 4.5% to Rs. 536.34 Crores by 2024-25 when the world market
size is likely to grow at CAGR of 5% from US$ 950 Million in 2019-20 to US$ 1,212.47 Million in 2024-25.
9.4.3 Interlining
Interlining is delicate, thick, and adaptable material used between the inner and outer layers of the garment
to improve shape retention, strength or bulk. Its texture depends on the material that is used to make it i.e.
the filaments of cotton, nylon, polyester, fleece or with their mixes. The product can be classified as woven,
non-woven and knitted. They are used in waistbands, flies, pockets, and belt loops of men's trousers, in the
cuffs, collars, plackets of shirts and in the lapels, fronts, collars, and pockets of tailored jackets and blazers.
Invisible from the outside, interlining ensures an accurate fit and optimum wearer comfort and, thus it forms
an important part of the garment. Interlinings simplify sewing and retain the shape and appearance of
materials. It also keeps the apparel easy to wear and lasting.
The Asia Pacific region dominates the interlinings market in terms of revenue. The key factor driving the
growth of the market in the region is the presence of major manufacturers of interlining in countries such as
China, India, and Bangladesh and the market is expected to grow in the near future due to increase in
demand for ready-to-wear clothes. Some of the major global players in the interlinings & linings market are
Chargeur, Freudenberg, Wendler, Kufner, QST, Veratex, PCC, Edmund Bell, Block Bindings, H&V, NH Textil,
Helsa, Evans Textile, Permess, Whaleys, MacCulloch & Wallis, Godolo, Alam, R.M.I., Shaning, Concorde,
Jianghuai, Haihui, YiYi, Yoniner, Huawei, Kingsafe, UBL, Seattle, FIX, Zhonghe, Surya, Ruby, Talreja, Blue
Star, Welco Agencies, Turakhia Textiles (IN). Key Indian players are Freudenberg India, Ruby Mills, Bombay
Dyeing, Talreja Textiles and Ashima Syntax.
________________________________________________________________________________________________

___________________________________________________________________________________________________
India’s interlining market was worth Rs. 946 Crores in the year 2019-20 and is likely to grow at a CAGR of
5.5% and touch a value of Rs. 1,235.41 Crores by the year 2024-25. The world market size stood at US$
1,081 Million and is expected grow at a CAGR of 3.99% and reach US$ 1,314.57 Million by 2024-25.
9.4.4 Labels and Badges

A label has information on the product's origin, manufacturer, use, shelf-life, and disposal. Labels are of two
types printed and woven. Printed labels often use satin, polyester, nylon and cotton twill. They are available in
variety of sizes and colours. On the other hand, woven labels are also available in variety of fabric choices like
satina and taffeta. Badges are attached to clothing, bags, footwear, vehicles, electrical equipment and are
generally made up of metal, plastic, leather, textile or rubber. Badges can be of different types such as button
badges, cloth badges, enamel lapel badges and name badges.
China and Europe are the largest consumers of labels and badges. India is a growing market for labels and
badges due to increase in the use of track & trace technologies. Label industry is concentrated in several key
cities like Bengaluru, New Delhi, Tirupur, Mumbai, Ahmedabad, Kolkata, and other cities of North and North-
east in India. Leading Indian manufacturers in India are KK NonWovens, Premco Global, Lynx, Arex
Industries, Uniroyal India, Unique Tags. Labels and badges constitute the largest share of the Indian
Clothtech industry.
India had a market size of Rs. 2,396 Crores during 2019-20 and it is likely to witness a CAGR of grow at
6.5% to about Rs. 3,276.80 Crores by 2024-25. The estimate of world market size in 2019-20 is US$ 2,383
Million and it is likely to grow for next five years at a CAGR of 4% to reach a figure of US$ 2,899.28 Million
in 2024-25.
9.4.5 Laces and Tapes (Treated/Coated)

Treated/Coated Laces and tapes, often referred as laces and tapes are small trimmed narrow fabrics used in
clothing sector. The usage of this technical textile is in shoe laces, tapes and laces used in apparels in
particular ladies dresses. According to some experts, shoe laces constitute about 95% of the demand for laces
and tapes. These laces are primarily made of polyester, cotton and nylon. Due to its durability and better anti-
slip properties, polyester laces outdo the others. India is the second largest manufacturer of footwear in the
world and this acts as a major driver of the lace industry in India.
Some of the domestic manufactures are Neelam Shoe Lace Industry , India Shoe Lace. Mr. Lacy, Starks,
Aventure, OrthoStep, Nike, BIRCH are some of the main global world manufacturers.
The value of India’s domestic market for Treated/ Coated Laces and Tapes is estimated at Rs. 975 Crores in
2019-20 and it is expected to touch Rs. 1,526.90 Crores by 2024-25 at a CAGR of 9.5%. The size of world
market for this product was US$ 1,235 Million in the year 2019-20 and is likely to grow at a CAGR of 3% for
next five years and touch US$ 1,431.70 Million in 2024-25.
9.4.6 Specialised and Industrial Sewing thread

Sewing threads are cabled yarn made out of natural or synthetic fibre. In terms of preference till now, cotton
fibre as a natural fibre is more in use than synthetic fibre due to its easy sew-ability as compared to silk or
linen. Synthetic fibres such as nylon and polyester are used for their high tensile strength, high abrasion
________________________________________________________________________________________________

___________________________________________________________________________________________________
resistance and lesser shrinkage. These threads find their usage in garments, shoes, leather products, quilts
and mattresses. Further, there are sewing threads for specialised and industrial uses in footwear, bags,
saddler, leno bags and jumbo bags industries. Only the sewing threads used for specialised and industrial
purposes like the ones for bags, footwear, saddler, large polypropylene based carry bags and jumbo(FIBC)
bags along with specialised threads for core industrial applications are protective applications (Nomex and
Kevlar threads) are considered as Technical Textile products due to their specialised functional use.
Despite having some key manufactures of sewing threads in India such as Vardhaman Mills, Madura Coats,
Reliance industries and Precot Meridian, India is a net importer of sewing threads The major importer for
specialised threads is DuPont which imports both Kevlar and Nomex threads in India.
India’s market size for Specialised and Industrial Sewing Threads was estimated at Rs. 1,130 Crores in 2019-
20 and it is expected to touch Rs. 1,769.39 Crores in 2024-25 as a result of growing at a CAGR of 9.5%. The
size of world market for this product was US$ 2,219 Million in the year 2019-20 and is likely to grow at a
CAGR of 4% for next five years and touch US$ 2,699.75 Million in 2024-25.
9.4.7 Umbrella cloth (TT Component)

Umbrella is a portable canopy-like structure designed to protect a person from sunlight and rain. Umbrella as
a whole is made up of canopy material, such as microfibre fabrics, nylon taffeta, cotton, acetate, laces,
leather, linen and others, along with materials such as aluminium, steel, wood, and plastic for other parts.
Umbrella cloth/fabric is the technical textile component of umbrella. Umbrella fabric is made up of polyester
yarn or nylon filament yarn in varying combinations such as 150T, 160T and 190T where T represents the
thread density. It can also be made up of pongee, satin, and plastic. There are various kinds of umbrellas;
commercial umbrellas, classic umbrellas, bubble umbrellas, wind-resistant umbrellas, automatic umbrellas,
golf umbrellas, artistic umbrellas, paper umbrellas and child umbrellas. Unpredictability of weather conditions
and rising concerns about skin cancer from the UV radiation of the sun are driving the growth of the umbrella
market around the globe.
Major players in international market are GustBuster, CrownCoast, Cloud Nine, Rain Ducky, Repel Umbrella,
Blunt Umbrellas, Alexander McQueen, London Undercover, RainStoppers, KolumboNonbreakable, Lewis N.
Clark. In India, umbrella fabrics are manufactured mainly by SME and MSME industries with a very limited
number of large-scale players. Leading manufacturers of umbrella fabric in India are SL Banthia Industries,
Coated Sales Company, Citizen Umbrella Manufacturers, etc. Umbrella fabrics are mainly imported from China.
India’s share in the technical textiles component of umbrella market is 2.12 % of the global market size in
2019-20. India had a market size of Rs. 181 Crores in 2019-20 which is expected to grow to Rs. 241.78 Crores
by 2024-25 at a CAGR of 6%. The value of the global market in 2019-20 is estimated at US$ 1,311 Million and
it is likely to grow at a CAGR of 1.84% and reach US$ 1,436.13 Million by 2024-25.
9.4.8 Zip fastener tape (TT Component)

Zip fasteners, also known as clasp lockers, are commonly used devices for binding the edges of an opening of
fabric or other flexible material, as on a garment or a bag. They are made from three major components
namely tape, slider, and elements. Zip fasteners/Zippers come in all different sizes, shapes, and colours. Zip
fasteners can be categorised by type and by applications. They can also be classified based on applications,
________________________________________________________________________________________________

___________________________________________________________________________________________________
garment, luggage & bags, sporting goods and camping gear. The surge in clothing expenditure is estimated to
foster positive development in the global zipper market. Due to the increased penetration of western outfits,
fashion conscious consumers, quality branded apparel, and expansion of the automotive industry the zip
fasteners market is likely to receive a boost.
The Japanese giant YKK and Chinese challenger SBS account for well over half the global zipper market. Major
domestic manufacturers are Vishant Traders Pvt. Ltd., Chetan Enterprises, Priya International, YKZ Zip
Fasteners Pvt. Ltd., Toni Industries Pvt. Ltd. and Microplast. The international market is dominated by YKK,
RIRI, YBS Zipper, Kao Shing Zipper, IDEAL Fastener, Coats Industrial, SALMI, Max Zipper, Sanli Zipper, HHH
Zipper, KCC Zipper, Sancris, SBS, 3F, YCC, Weixing Group, YQQ, XinHong Zipper, CMZ Zipper, Zhejiang LIDA
Zipper, Xinyu Zipper, HSD Zipper, TAT-Zipper, JKJ Zipper, DIS, THC Zipper, ABC Zipper, Hengxiang Zipper,
Hualing-Zipper and QCC.
India’s market size for zip fasteners was at Rs. 293 Crores in 2019-20 and it is expected to touch Rs. 392.15
Crores by 2024-25 at a CAGR of 6%. The size of world market for this product was US$ 281 Million in the year
2019-20 and is likely to grow at a CAGR of 5.01% for next five years and touch US$ 358.81 Million.
9.5 Geotech
Geotextiles are a kind of geo-synthetic material that owe their success to their resistance to biodegradation.
They are mostly made by using synthetic fibres that can be made into a flexible, porous, nonwoven needle felt
fabric. They are porous to water flow to a varying degree.
Technical textile products under Geotech segment are as follows:
1. Geotextiles
2. Geomembranes
3. Geonets, Geogrids and Geostrips
4. Geocomposites
5. Geotextile tubes
6. Geomats
________________________________________________________________________________________________

___________________________________________________________________________________________________
Figure 9.10: Percentage contribution of Geotech products in the domestic market (2019-20)
Geomembranes,
14.15%
Geotextiles, 37.32%
Geocomposites,
13.07%
Geomats, 2.68%
Geonets, geogrids,
and geostrips, Others, 4.68% Geotextile tubes,
25.12% 2.98%
Geotextiles form the biggest portion of the domestic market at a share of 37.32% and Geonets, Geogrids and
Geostrips at 25.12% have the second largest share.
Figure 9.11: Percentage contribution of Geotech products in the international market (2019-20)
Geomembranes, Geotextile tubes,

28.27% 2.75%
Geonets, geogrids,
and geostrips,
17.53%
Geotextiles,
42.77%
Others,
1.34%
Geomats,
Geocomposites,
2.63%
4.70%
Globally, Geotextiles have the biggest market share at approximately 43% and Geomembranes at nearly 28%
have the next largest share.
________________________________________________________________________________________________

___________________________________________________________________________________________________
Table 9.6: Geotech - World and India Market Size 2019-20
Geotextiles 3,184 765 3.69%
Geomembranes 2,105 290 2.12%
Geonets, Geogrids and Geostrips 1,305 515 6.06%
Geocomposites 350 268 11.76%
Geotextile tubes 205 61 4.57%
Geomats 196 55 4.31%
Others 100 96 14.74%
Total 7,445 2,050 4.23%
Figure 9.12: Production vs. Consumption of Geotech segment in the domestic market (Rs. Crores)
4,872
4,483
4,060
3,841
3,383 3,283
2,820 2,806
2,350 2,399
1,958 2,050
2019-20 2020-21 2021-22 (E) 2022-23 (E) 2023-24 (E) 2024-25 (E)
The consumption (value estimated at Rs. 2,050 Crores in 2019-20) of Geotech products exceeds the
production (estimated value Rs. 1,958 Crores). India is currently an importer and is likely to become a net
exporter due to expected higher rate of increase in production despite increase in consumption over the
coming five years (till 2024-25).
9.5.1 Geotextiles
Geotextiles are permeable material fabricated like a blanket from synthetic yarns or fibres. There are three
main types of geotextiles: woven, nonwoven and knitted type. Most of the woven and nonwoven geotextiles
are manufactured from yarns and fibres such as polypropylene, polyester, polyethylene and polyamide. A few
________________________________________________________________________________________________

___________________________________________________________________________________________________
geotextiles are produced from natural fibres such as jute due to its biodegradable nature. Such geotextiles are
mostly used in erosion control applications.
The major applications of Geotextiles are in roads

and highways for reinforcement, separation,
drainage/filtration, containment and erosion control;
railroad track construction and maintenance for
separating the sub-grade from the ballast layer or the
sub-grade from the sub-ballast layer, reinforcement,
filtration, and drainage; flood control and coastline
protection through reinforcement of flood control
structures such as levees and dams built over soft
soils, containment of storm water runoff and
restoration of threatened coastlines; waste
management through separation, filtration, and erosion control. Residential and non-residential construction
utilise geotextiles for reinforcement of retaining walls.
Major global manufacturers of geotextiles are TenCate Geosynthetics Americas, Propex Inc., CONTECH and
DuPont and the main manufacturers of geotextiles in India are Techfab India Ltd., Strata Geosynthetics Ltd.,
SKAPS Ltd., Maccaferi Environmental Solutions, Terram India Ltd.
It is estimated that the market size of geotextiles in India in 2019-20 was Rs. 765 Crores and it is likely to
grow at a CAGR of 20% to Rs. 1,903.56 Crores by 2024-25. The global market for geotextiles is US$ 3,184
Million in 2019-20 and it will grow at a CAGR of 6.1% to reach a figure of US$ 4,261.20 Million in 2024-25.
USA consumes almost a third of geotextiles of the world.
9.5.2 Geomembranes
Geomembranes are generally non-permeable sheets which are available in large custom panels or rolled
goods that can be field seamed to form a barrier system. These are produced from various types of polymers
(e.g. LLDPE, HDPE, PVC, CSPE, EPDM and PPE) as well as layered fibreglass and bitumen-impregnated
geotextile. The most common use of geomembranes is the containment of hazardous and urban waste and
their leachates. Geomembranes are often used in combination with geotextile or mesh underliners. The
underliner reinforces and protects the more flexible geomembrane, while providing an escape route for gases
and leachates generated in some wastes. The usage of Geomembranes in the developed nations is very high
but its use in India is relatively low and that too primarily for water management in the form of liners for
canals and reservoirs. In addition to what is strictly defined as Geomembranes, there is a wide range of
extruded plastic sheet-based liners of different thicknesses which are also used as liners of water bodies.
These are also regarded by some as part of Geomembranes. However, for the present report, such plastics
are kept out of the purview of Geotech.
There are only a few Indian manufacturers for Geomembranes and the prominent ones among them are
Strata Geosystems (India) Pvt Ltd., Maharshee Geomembrane (India) Pvt. Ltd., Megaplast India Private
Limited (MIPL), Maruti Rub Plast Pvt. Ltd., Essen Multipack Ltd. and DP wires Ltd. The major global players
are TenCate Geosynthetics, Solmax Geosynthetics LLC, GundleSLE Environmental (GSE), Maccaferri Corporate,
________________________________________________________________________________________________

___________________________________________________________________________________________________
Thrace Group, Tenax S.p.A., Tensar International Corporation, GSE Environmental, Fibertex Nonwovens A/S,
HUESKER Synthetic GmbH, Fibromat (M) Sdn. Bhd., Agru America Inc., Steklonit, Strata Systems Inc.,
Pietrucha Group, Global Synthetics and SKAPS Industries. There are two major Geoliner manufacturers too at
the global level viz. Owens Corning Inc. and Texel Geosynthetics Inc.
The domestic market for geomembrane in India is as yet limited and is estimated at Rs. 290 Crores for the
year 2019-20. However, it is expected to experience a high CAGR of 20% in the next five years and reach a
market size of Rs. 721.61 Crores in 2024-25. While the USA, being the largest market for Geomembranes
consumed 217 million square yards of Geomembranes worth nearly US$ 1.1 billion in 2020, the world market
for Geomembranes in the same year is estimated to have been worth US$ 2,105 million. The world market is
likely to grow at a CAGR of 4.5% and log sales worth US$ 2,619.77 Million by 2024-25.
9.5.3 Geonets, Geogrids and Geostrips

Geonets and geogrids are the terms for geosynthetic materials of rigid type that are fabricated in the form of
a regular mesh with relatively large voids in the material. Geostrips are fabricated in the form of strips.
Geonets and geogrids are produced by different methods (e.g. extrusion, bonding, and interlacing) from
polymeric materials. Geonets and geogrids are typically used to provide reinforcement of soil structure
beneath civil construction or roads by distributing the load over a broader area. Geonets/geogrids are of two
types: biaxial and uniaxial. Biaxial geonets and geogrids are used in roadways, where they are used to
stabilise or to reinforce the base materials. Uniaxial geogrids are mainly used to reinforce the soil mass in a
steepened slope or segmental retaining wall and to a small extent as a wrapping to confine the aggregate in
the wire forms of welded wire faced steepened slopes. Geonets are being used in railway construction on
account of their ability to act as filters, separators, and facilitators in channelising water through lateral
drainage. In addition, they are used for the reinforcement of rail tracks for stress reduction, thus ensuring
long-term efficient performance. Roads and highways, railroads, airports use geogrids to reinforce runways
and embankments, geogrids are used primarily in landfill soil reinforcement applications such as reinforcing
landfill covers and base liners and geogrids are used to reinforce mining roads and mine walls and ceilings.
The situation in India for geostrips is different from what it is in other countries. Reinforced soil walls are built
in large quantities and they consume geostrip and geogrid more than geotextile tubes. Geostrips are mainly
used along the road for manufacturing retaining walls due to less availability of space in India. Geostrips have
maximum share in reinforced soil wall segment.
Geonets and geogrids are typically fabricated from HDPE, polypropylene, polyester or fiberglass yarn.
Geogrids are primarily made of polypropylene, polyethylene, or polyester. Uniaxial grids are made from HDPE
and biaxial grids from PP. Geonets are generally made from high-density polyethylene and are used for
drainage applications. To provide the geogrid with dimensional stability during handling and installation, the
yarns may be coated with PVC, bitumen, or latex. In some cases, two layers of geogrid are offset and welded
together to create a sheet with random sized openings that reportedly result in improved soil interaction.
Major players for this product group in India are Strata Geosystems (India) Pvt. Ltd, Techfab India Ltd,
Reinforced Earth and Maccaferri Environmental Solutions, Maruti Rub Plast Pvt. Ltd and Geosys India Ltd.
Prominent global players are Tensar Corp., Strata Systems, Synteen Technical Fabrics, Tenex, Colbond,
Koninklijke TenCate BV, Naue GmbH & Co., Huesker Synthetic GmbH and Ace Taiwan.
________________________________________________________________________________________________

___________________________________________________________________________________________________
The global market for geogrids was US$ 1,305 Million whereas the Indian market stood at Rs. 515 Crores in
2019-20. The global market is expected to grow at a CAGR of 5.5% and likely to touch a value of
US$ 1,704.92 Million whereas the Indian market is expected to grow at a CAGR of 15% for the next five
years. It is projected that the Indian market will be worth Rs. 1,035.85 Crores by the year 2024-25.
9.5.4 Geocomposites
Geocomposites are those materials which are made of two components viz. geofabric and geonet. These
consist of a combination of geotextiles, geonets, geogrids, and/or geomembranes. It is the desired
characteristics of the end-product which determines the mix of geocomposite materials and manufacturing
methods. Geosynthetic clay liners or GCLs, which are fabricated with a bentonite clay layer either sandwiched
between two layers of geotextile or else bonded to a geomembrane or single layer of geotextile are also
considered as Geocomposites. The hydrated GCLs are mostly used in landfill liner applications in combination
with a conventional geomembrane. The market for geosynthetic clay liners, especially in solid waste
applications, is growing faster than other product segments.
The most common type of geocomposite is drainage geocomposites. Drainage geocomposites consist of a
three-dimensional core layer through which fluid or gas flows, with geotextiles attached to one or both sides
to filter out soils and other particulates that could impede the fluid flow through the drainage core and thus
provide stability to the soil by providing friction for shear stability on slopes. There are three types of drainage
geocomposites, based on the core materials, Geonet core composites, Geomat core and Cuspated core. The
geotextile layer(s) of a drainage geocomposite may be made of woven or nonwoven (usually PP or PE)
geotextile. PP monofilament geomats or HDPE geonets are the commonly used drainage cores.
Drainage is the most common application for a geocomposites in different fields such as road building, solid
and hazardous waste landfills, mining, and private construction. Drainage composites are also used to remove
gases, as in the case of landfill gases.
Major market players which produce Geocomposites in India are TechFab India Ltd., Maccaferri
Environmental Solutions and Terram Geosynthetics Pvt Ltd. At the global level, the main producer
organisations are ABG Ltd., Terram Geosynthetics Private Limited, Thrace Group, Tenax Group, Crafco, Inc.,
SKAPS Industries, Koninklijke Ten Cate BV, Tensar International Corporation, GSE Environmental, Officine
Maccaferri Spa, HUESKER International, Leggett & Platt Inc., Qingdao Haisan New Energy Co. Ltd., Edifloor
S.P.A., American Wick Drain, Alyaf industrial company limited, NAUE GmbH & Co. KG, Contech Engineered
Solutions LLC, MDB Texinov, Hanes Geo Components.
The market size for geocomposites in India for 2019-20 is Rs. 268 Crores and is likely to grow at a CAGR of
15% and is estimated to be Rs. 539.04 Crores in 2024-25. The world market for geocomposites is estimated
at a value of US$ 350 Million and the forecast is for it to grow at a CAGR of 6.5% and reach US$ 479.78
Million by 2024-25.
9.5.5 Geotextile tubes

Geotextile tubes are among the most commonly used and most economical choice for dewatering a large site,
water reservoir or waste water treatment plant. Dewatering tubes remove and control sludge or sediment
from a water flow and are a very good alternative to mechanical methods used for dewatering. Geotextile
________________________________________________________________________________________________

___________________________________________________________________________________________________
tubes are environmentally friendly because the decanted water can be recycled as also the water that is
placed into storm drainages or water tables The large-size Geotextile tubes with high strength and durability
can act as effective sludge tubes for heavy containment requirements. Geotextile tube systems are often used
for coastal and marine construction for erosion control on the shores, land reclamation, island creation,
wetlands creation, construction platforms, revetments, dykes, and offshore structures. The cost efficiency,
speed and very low environmental impact, sludge dewatering geotextile tubes are increasingly being used in
marine dredging, water and wastewater treatment, construction dewatering, remediation of agriculture and
protection of shoreline. Geotextile tubes offer the ideal coastal protection and erosion mitigation solution as
they are environmentally friendly and flexible in nature.
Geotextile tubes are made of robust woven geotextile material (using specially engineered woven and
composite fabrics) and involve the fabrication of close-ended tubular containers attached with filling ports
at regularly spaced intervals. The technology involves the fabrication of large containers made of specially
engineered textiles, which are filled with dredged sediments or sand on-site. Similar to dewatering bags,
geotextile dewatering tubes are made from permeable fabrics that allow water to pass and filter through
the bag.
Major players which produce Geotextile tubes in India are Garware Technical Fibres Ltd., TechFab India Ltd.,
Maccaferri Environmental Solutions and Flexituff Ventures International Limited (India). The leading
manufacturers at the global level are Koninklijke TenCate BV, Maccaferri Corporate and Flint Technical
Geosolutions.
It is estimated by industry experts that the market size of geotextile tubes in India in 2019-20 is Rs. 61 Crores
and it is likely to grow at a CAGR of 10% and grow to Rs. 98.24 Crores by 2024-25. The global market for
geotextiles is US$ 205 Million in 2019-20 and it will grow at a CAGR of 8% to reach a figure of US$ 301.77
Million in 2024-25.
9.5.6 Geomats
Synthetic geomats are usually made of synthetic material filaments (typically polyamide and polypropylene but
not always) tangled together to form a high deformable layer of 10-20 mm thickness, featuring very high
porosity (greater than 90% on average). However, in India , geomats are very commonly made from natural
fibres like Coir (in south India) and Jute (in eastern parts of India). Geomats are used mainly for controlling
soil erosion especially on slopes to offer resistance to rain induced erosion. Geomats may also be used as a
protection against erosion for canal and river banks. Their use is limited to protect that part of bank that is dry
and susceptible to erosion only by raindrops. Like geonets, geomats may also be used as elements for
drainage in combination with geotextiles and geomembranes.
Major market players which produce synthetic geomats in India are TechFab India Ltd. and Maccaferri
Environmental Solutions, at the global level, the main producer organisations are Tenax Group and Tensar
International Corporation.
The world market for Geomats was US$ 196 Million whereas the Indian market stood at Rs. 55 Crores in
2019-20. The global market is expected to grow at a CAGR of 7% and likely to touch a value of US$ 275.17
Million whereas the Indian market is expected to grow at a CAGR of 10% for the next five years. It is
projected that the Indian market for geomats will be worth Rs. 88.58 Crores by the year 2024-25.
________________________________________________________________________________________________

___________________________________________________________________________________________________
9.5.7 Geocells
A geocell is a thin-walled cell that, when filled with soil, sand or gravel, enhances the load bearing capability
of soft subgrade much better than compacted soil alone. Geocells are usually interconnected to form a
honeycomb shape which provides reinforcement through cellular confinement and prevent sub-optimal soil
from getting eroded. With the use of geocells, free draining and poorly compacting soil can also be used for
construction. Geocells have been constructed from a variety of materials, including fibreglass and aluminum.
However, high density polyethylene (HDPE) is becoming immensely popular as a suitable material for geocells.
The use of Geocells has not caught on in a big way in India yet and it is very challenging to obtain reliable
estimates of its consumption as of now.
9.5.8 Geofoams
Geofoam is rigid cellular foam polymeric material such as expanded polystyrene (EPS) which is used in
geotech applications. It acts as a supplementary reinforcement fill material to a poorly compacting soil. Most
geofoams and geocomposites are made from expanded polystyrene (EPS). Geofoam is relatively very light and
its extreme lightness makes it an attractive fill material. Geofoam is used in embankments, slope stabilisation,
retaining structures, utility protection, pavement insulation, and shallow foundations. As geofoam is very light,
no large earthmoving equipment is required for moving it. Once the material is delivered to the site, blocks
are easily trimmed to size and placed by hand. It also can be constructed in adverse weather conditions.
Geofoams are gradually becoming popular in usage.
9.5.9 Geocombs
In contrast to geofoam, whose structure consists of closed polymer cells, geocomb consists of numerous
open-ended tubes that are glued, fused or otherwise bonded together. Rigid polymers such as polypropylene
and PVC are the most common types of geocomb material. The cross-section of bonded tubes resembles a
honeycomb, which explains the name “geocomb” that is given to it. The open ends of the geocomb blocks are
usually covered with a geotextile to prevent soil particles from entering the open ends of the tubes. Geocombs
were first used in France in the 1980s, but are not yet widely used outside Europe. Geocomb applications
include use as a lightweight fill, confinement of coarse-grained soils, and construction of underground storm
water storage chambers.
9.5.10 Geopipes
Geocells and geofoams/geocombs are generally used for soil reinforcement, while geopipes are used for
drainage of liquids and gases. Geopipes are perforated or solid-wall polymeric pipes used for drainage of
liquids or gas (including leachate or gas collection in landfill applications). In some cases, the perforated pipe
is wrapped with a geotextile filter. The advantage of geopipes stems from the fact that they allow higher fluid
infiltration rates permitting the use of smaller diameters of pipes and they are stress resistant and do not get
easily deformed. Polyvinyl chloride is the most commonly used material in the fabrication of geopipes.
Reliable estimates of the use of geopipes are difficult to obtain.
________________________________________________________________________________________________

___________________________________________________________________________________________________
9.6 Hometech
Hometech are textiles used in home furnishings. It constitutes a range of functional and decorative products
thus providing solutions to modern living. Some of the major applications of Hometech in the domestic
environment are interior decoration and furniture, carpeting, protection against the sun, cushion materials,
fireproofing, pillows, floor and wall coverings and textile reinforced structures/fittings.
Technical textile products under Hometech segment are as follows:
1. Blinds (TT Component)
2. Carpet Backing Cloth (CBC)
3. Fibre Fill (Polyester Staple Fibre)
4. Filter Fabric (HVAC and Vacuum Cleaner)
5. Furniture and Other Coated Fabrics
6. Mosquito Nets
7. Non-woven Household Wipes
8. Stuffed Toys (Plush Fabric)
9. Ticking Fabric
Figure 9.13: Percentage contribution of Hometech products in the domestic market (2019-20)
Furniture fabrics and

Mosquito nets,
other coated fabrics, Stuffed toys (plush
7.74% 27.14% fabric),
4.3%
Non-woven household
wipes, 0.67% Others,
4.29%
Filter fabrics (HVAC and
vacuum cleaners),
1.10%
Blinds,
9.84%
Fibrefill (polyester
Carpet backing cloth staple fibre),
Ticking fabric, 35.60%
(CBC),
6.73%
2.58%
Fibrefill (Polyster staple fibre) comprise the biggest portion of the domestic market at a share of more than 35%
and furniture fabrics and other coated fabrics at approximately 27% have the second largest share.
________________________________________________________________________________________________

___________________________________________________________________________________________________
Figure 9.14: Percentage contribution of Hometech products in the international market (2019-20)
Furniture fabrics and

other coated fabrics,
Ticking fabric, 27.37%
10.68%
Others,
Mosquito nets, 0.64%
13.58%
Fibrefill (polyester
Non-woven staple fibre),
household wipes, 11.55%
5.16%
Carpet backing cloth

Filter fabrics (HVAC and (CBC),
vacuum cleaners), 10.17%
4.71% Blinds,
Stuffed toys (plush
8.60%
fabric),
7.55%
Furniture fabrics and other coated fabrics constitute the largest share of the global market at 27.37% and
Fibrefill (Polyster staple fibre) at approximately 12% has the second largest share of market.
Figure 9.15: Production vs. Consumption of Hometech segment in the domestic market (Rs. Crores)
19,371
18,491
16,810 17,145
16,041
15,282 14,853
13,892 13,752
13,231
12,352 12,734
2019-20 2020-21 2021-22 (E) 2022-23 (E) 2023-24 (E) 2024-25 (E)
India’s production of Hometech products has an estimated value of Rs. 13,231 Crores in 2019-20. It is higher
than the consumption which is valued at Rs. 12,352 Crores. This gap is likely to increase which indicates good
opportunities for Hometech producers to address new export markets.
________________________________________________________________________________________________

___________________________________________________________________________________________________
Table 9.7: Hometech - World and India Market Size 2019-20
Blinds (TT Component) 1,691 1,216 11.04%
Carpet Backing Cloth (CBC) 1,998 319 2.45%
Fibre Fill (Polyester Staple Fibre) 2,270 4,397 29.74%
Filter Fabric (HVAC and Vacuum 925 136 2.26%

Cleaner)
Furniture and Other Coated Fabrics 5,380 3,353 9.57%
Mosquito Nets 2,669 956 5.50%
Non-woven Household Wipes 1,014 83 1.25%
Stuffed Toys (Plush Fabric) 1,483 531 5.50%
Ticking Fabric 2,099 832 6.08%
Total 19,654 12,352 9.65%
9.6.1 Blinds
Blinds are an alternative to curtains, and these are used to provide cover and shade for windows to allow only
the desired level of sunlight inside. These are made up of blind fabric. The threads and supporters are made
up of wood, metal or plastic components. Blinds are used for their properties such as low maintenance,
temperature control, opacity and or being fire retardant. Blinds are segmented into residential, commercial
and industrial based on their application.
Leading manufacturers of blind fabrics in India are Hunter Douglas India, Alps Industries, Mac Decor and
Aerolux India Ltd. Major international players are Comfortex Window Fashions, Shade O Matic, Innovative
Openings, Louvolite, Maxxmar Window Fashions, Nien Made Enterprise Co. Ltd., Norman Window Fashions.,
Roll-A-Shade, Rollease Acmeda, Springs Window Fashions, Liyang Xinyuan Curtain, Advanced Window Blinds,
Aspect Blinds, MechoShade Systems, LLC., Timber Blinds Metro Shade, Domir Blinds Manufacturing Inc., Toso
Company Ltd., Graber and Budget Blinds.
India’s blinds market constitutes 11.04% of the world in the year 2019-20 with market size of Rs. 1,216
Crores, which is likely to grow at a CAGR of 11.6% and touch Rs. 2,100.66 Crores in the year 2024-25. The
world market is likely to grow at a CAGR of 3.34% for the next five years and will climb from US$ 1,691
Million in 2019-20 to US$ 1,992.90 Million in 2024-25.
9.6.2 Carpet Backing Cloth (CBC)

Carpet backing is the base material on the back of the carpet made up of polypropylene fabric or jute, cotton,
and carpet rayon, in which yarn is tufted or stitched to make carpets. It is tear-resistant, pre-forged, woven or
________________________________________________________________________________________________

___________________________________________________________________________________________________
non-woven. The increase in residential and commercial construction activities is projected to boost the
demand for carpets and therefore the Carpet Backing Cloth. These are used for residential as well as
commercial purposes in hotels and stores.
Key Indian manufacturers in carpet backing cloth are Birla Corporation Ltd., Charminar Nonwovens Ltd., Foam
Mattings (India) Ltd. and Indarsen Shamlal Private Ltd.
Key global players in carpet backing cloth are Shaw Industries Group Inc., Tarkett, Interface Inc., Balta
Industries NV, Wacker Chemie AG, The Dow Chemical Company, Associated Weavers Europe NV/SA, Amtico
International, Ege Carpets and Beaulieu Technical Textiles.
The size of India’s market for carpet backing cloth was at 2.45% of world market. India had a market size of
Rs. 319 Crores in 2019-20 and it is expected to increase at a CAGR of 2% and is estimated to be valued at Rs.
352.83 Crores in 2024-25. The size of the world market was US$ 1,998 Million and the global market is likely
to grow at a CAGR of 4.65% to reach US$ 2,507.79 Million by 2024-25.
9.6.3 Fibre fill (Polyester Staple Fibre)

Polyester Staple Fibre (PSF) is lightweight, wrinkle-free, and weather-resistant. It is used as a key component
in various end-use sectors such as apparel, home furnishing, construction and automotive. In home
furnishings, it is used as filling in mattresses, pillows, cushions, and insulated quilts.
Cotton has been commonly used for filling home furnishing products, but PSF is now replacing cotton due to
its thin and lightweight nature. It also offers antimicrobial properties and offers advanced protection against
infections and bad odour. By application, the market can be segmented into textile, home furnishing,
automotive, filtration, construction, and miscellaneous industries.
China, India and South Korea are attractive markets due to rising demand from various applications in
apparel, automotive and home furnishing due to high and growing population accompanied with growth in
their respective country economies.
Some of the leading Indian players are Reliance Industries Ltd., Bombay Dyeing & Manufacturing Company
Ltd., Sarla Fibres Ltd., PolyFiber Industries Pvt. Ltd. and Nirmal Fibres Ltd.
Some of the leading global players are William Barnet and Son, LLC, Yizheng Chemical Fiber Company Limited,
Märkische Faser GmbH, Toray Industries Inc., Far Eastern New Century Corporation and Nan Ya Plastics
Corporation.
The global market for fibrefill was US$ 2,270 Million whereas the Indian market stood at Rs 4,397 Crores in
2019-20. The global market is expected to grow at a CAGR of 6.23% and have a value of US$ 3,070.87 Million
whereas the Indian market is expected to grow at a CAGR of 5.7% to reach Rs 5,791.79 Crores in 2024-25.
9.6.4 Filter Fabrics (HVAC and Vacuum Cleaners)

Filter fabrics are used in home electronic devices such as vacuum cleaners, air conditioners and heating
ventilation and air conditioner systems (HVAC) and are made from nonwoven fabrics. HVAC units are used to
provide cooling and heating solutions for large spaces like offices, shopping malls and institutions.
________________________________________________________________________________________________

___________________________________________________________________________________________________
There are 4 types of filters – pre-filters, medium efficiency filters, high efficiency particulate air (HEPA) filters
and ultra low penetration air (ULPA) filters. This distinction is made based on efficiency of particle removal.
Most of the demand for filter fabrics comes from home AC and HVAC used in large spaces. With an increase in
health disorders like allergies, headache, asthma, cough and sinus, the demand for filters is expected to rise.
Government regulations for efficient air filtration systems to protect factory workers will also contribute to
rising demand.
The top filter fabrics producing countries are Germany, China and the United States of America.
The major vendors in the fabric filters market are Ahlstrom-Munksjo, Lydall, Inc., Valmet, Freudenberg
Filtration Technologies, Kimberly-Clark, Clear Edge, Fibertex Nonwovens, Hollingsworth & Vose, Johns
Manville, Sefar AG, 3M, American Fabric Filter, APC Filtration, Berry Global Inc., Donaldson Filtration Solutions,
Eagle Nonwovens Inc., Irema Ireland, MANN+HUMMEL, Norafin Industries, Nordic Air Filtration, Sandler AG,
Schweitzer-Mauduit International Inc. and TWE group. Major Indian players are Autotech Nonwovens Ltd.,
Valmet Technologies Private Limited, Park Non Woven Pvt. Ltd., Khosla Profil Pvt. Ltd. etc.
The global market for filter fabric stood at US$ 925 Million in 2019-20, expected to grow at 5.14% to
US$ 1,188.45 Million in 2024-25. The Indian market for filter fabric is estimated at Rs. 136 Crores in 2019-20.
It is expected to grow at a CAGR of 12.8% to Rs. 249.41 Crores.
9.6.5 Furniture fabrics & other coated fabrics

The Indian furniture market comprises home furniture, office furniture and contract furniture (mainly in the
hospitality industry). Fabrics that are used in furniture designed for seating purposes are called furniture
fabrics. They are used for padding or used as coverings. There are thirteen different types of furniture fabrics,
with leather and polyester being the most widely used. The coated fabrics can be fabrics used for chemical
protective clothing, automatic coated fabric, transportation, awnings and canopies, industrial roofing, furniture
and seating.
The Asia Pacific region is the biggest market for furniture and coated fabrics, followed by North America and
Europe. India imports furniture fabrics mainly from China, Republic of Korea, Taiwan, United Kingdom, and
Italy. Major Indian companies for this product are Devaa Textiles, and Aavaran Creations. Major global
companies are Spradling International Inc., Seaman Corporation, Trelleborg AB, Saint-Gobain SA, Sioen
Industries NV, Low & Bonar PLC, Serge Ferrari Group, Continental AG, Takata Corporation, Saint-Gobain SA
and OMNOVO Solutions Inc.
The global market size of Furniture fabric and other coated fabric was US$ 5,380 Million in 2019-20, estimated
to grow at a CAGR of 4.55% till 2024-25 so as to reach a value of US$ 6,720.51 Million. The Indian market
was Rs. 3,353 Crores in 2019-20 and is expected to grow at a CAGR of 6.9% for the next five years to reach a
value of Rs. 4,689.73 Crores.
9.6.6 Mosquito Nets

Mosquito nets, also known as mosquito bed nets, are fine meshed curtains that are draped over a bed or
sleeping area to offer protection against insect bites and stings (including but not limited to mosquitoes). The
mesh is fine enough to prevent passage of insects but large enough, so it doesn’t obscure visibility. A net with
________________________________________________________________________________________________

___________________________________________________________________________________________________
mesh size smaller than 1.2 mm will block mosquitoes, nets with meshes smaller than 0.6 mm are required for
some other insects such as biting midges. Mosquito nets are usually made from cotton, polyethylene,
polyester, polypropylene or nylon. Nets made for covering doors and windows can also be made of steel,
aluminium or thick unbreakable fibre. New kinds of mosquito nets entering the market are, Mosquito Mesh,
Window Mosquito Mesh, Portable Mosquito mesh, Mosquito Screen and Baby Mosquito Net.
Key Indian players are Raj Filters, Fars Wiremesh, RK Ecran, Philer and Spectra Services. African countries are
some of the biggest consumers of mosquito nets, specifically insecticide treated mosquito nets, with Niger,
Guinea-Bissau and Benin being some of the biggest. Key global players are Insect COP, FUANNA, Mercury,
Klamboe, MENDALE and YuanMeng.
In 2019-20, the market for mosquito nets was worth Rs. 956 Crores as compared to the global market which
was worth US$ 2,669 Million. The Indian market is expected to grow at a CAGR of 4% to reach Rs. 1,162.92
Crores by 2024-25. The global market is forecasted to grow at 3% and likely to be worth US$ 3,094.10
Million.
9.6.7 Non-woven Household Wipes

Wipes are products made of cloth, tissue or nonwovens which remove dirt or liquid from surfaces on light
rubbing. The main purpose of wipes is cleaning, and disinfection and they are largely used for personal care
but also for household cleaning and medicinal use. Nonwoven wipes are specifically made from viscose or
polypropylene polyester. Nonwoven wipes are available as dry wipes as well as wet (pre-moistened) wipes
and these are used in the medical, food service, hygiene product and automotive industry.
North America is the largest market for wipes whereas the demand for wipes is limited in India. Earlier, this
limited demand used to be met completely through imports, but now this product is being manufactured
domestically with key players being Kimberly Clarke, Ginni Filaments and Proctor & Gamble. Key players
globally are Microfiber Corp., KK NonWovens, MLM, Yessor, Freudenberg and Alpha Foam. Majority of
nonwoven wipes are manufactured by spun lace technology.
The global market for nonwoven household wipes stood at US$ 1,014 Million in 2019-20 and is expected to
grow at CAGR of 6% for next five years when it is forecasted to be worth US$ 1,356.96 Million. The Indian
market for nonwoven household wipes is relatively very small at Rs. 83 Crores but it is estimated to grow at a
CAGR of 9% and be worth Rs. 126.38 Crores by 2024-25.
9.6.8 Stuffed Toys (Plush Fabric)

Stuffed toys are soft toys made from soft knitted fabrics and stuffed with a soft material. With children as the
primary target group, stuffed toys are manufactured in various forms resembling animals, cartoon characters,
human beings, dolls, legendary creatures, or inanimate objects. They are often used for display, as comfort
objects, or given as gifts during festivities. The fabric used to fill these toys is called plush fabric, which is
largely made of polyester and constitutes 25-30% of the finished toy.
Key companies in India for manufacturing stuffed toys are Hanung toys, Pal Plush and Archies. North America
is considered to be the largest regional market due to rising demand for custom-made plush toys. Key
companies in the global market are Mattel Inc., Bandai Namco Group, LEGO A/S; Hasbro, Inc, Spin Master
________________________________________________________________________________________________

___________________________________________________________________________________________________
Ltd., Build-A-Bear Workshop Inc., Budsies, Aurora World, Inc., Teddy-Hermann GmbH, Margarete Steiff GmbH
LLC., Giantmicrobes, Inc. and Simba Dickie Group.
The global market for plush fabric in 2019-20 was US$ 1,483 Million, estimated to grow at 6.96% per year till
2024-25 to a value of US$ 2,076.10. The Indian market for plush fabric in 2019-20 was Rs. 531 Crores
constituting 5.5% of world market. It is likely to grow at a CAGR of 12.8% till 2024-25 and forecasted for a
value of Rs 971.49 Crores.
9.6.9 Others
9.6.9.1 Ticking fabric
Ticking is the protective fabric covering on the mattress that holds the filling material inside. It is usually made
of cotton and comes in a wide variety of colours and styles. These are used in high end mattresses, and
require special maintenance. In India, the import/export of ticking fabric is insignificant, but the market is
growing.
Jacquard Fabrics India Pvt. Ltd. (part of Stellini Group) is the largest producer of woven mattress ticking fabric
with highest woven ticking production capacity in India. Its polyester-polypropylene and polyester-
polypropylene viscose woven ticking is used by major mattress manufacturers in the Indian market such as
Kurl-On, Sleepwell, Sheela Foam and others.
The Indian market size for ticking fabric was Rs. 832 Crores in 2020 and is expected to grow at a CAGR of
7.9% for the next five years to a value of Rs. 1,217.55 Crores. The global market will rise from US$ 2,099
Million at the rate of 4% till 2024-25 and reach US$ 2,553.75 Million.
9.7 Indutech
Indutech are technical textiles used in the industrial (manufacturing) applications like filtration, conveying,
cleaning etc.
Technical textile products under Indutech segment are as follows:
1. AGM glass battery separators
2. Bolting cloth
3. Conveyor belts (TT component)
4. Decatising cloth
5. Drive belts (TT component)
6. Filtration products
7. Industrial webbings and slings
8. Paper making fabrics
9. Printed circuit boards (TT component)
________________________________________________________________________________________________

___________________________________________________________________________________________________
10. Ropes and cordages
11. Coated Abrasives
12. Computer Ribbon
13. Cigarette Filter Rods
14. Glass Fabric (as part of Composites- TT Part)
Figure 9.16: Percentage contribution of Indutech products in the domestic market (2019-20)
Glass fabric (as part

of composites - TT
part), Printed circuit boards
(TT component), Computer
25.32% ribbon,
0.33%
2.86%
Ropes and cordages,
16.17% Industrial filtration
products,
7.67%
AGM glass battery Paper making fabric,

separators, 3.59%
6.88%
Bolting cloth, Industrial webbing

0.48% and slings,
4.38%
Decatising cloth,
0.45%
Coated abrasives,
Cigarette filter rods, Conveyor belts, Others, 17.68%
4.57% 5.45% 0.19%
Drive belts,
3.99%
The highest share of domestic Indutech market in terms of value is comprised of Glass fabric (25.32%). Coated
abrasives at 17.68% make up the next largest share of the Indian Indutech market.
________________________________________________________________________________________________

___________________________________________________________________________________________________
Figure 9.17: Percentage contribution of Indutech products in the international market (2019-20)
Cigarette filter rods,

7.71% Glass fabric (as part
of composites - TT
part),
Coated abrasives, 15.54%
24.98%
Ropes and cordages,

13.65%
AGM glass battery Printed circuit boards

separators,
(TT component),
7.74% 1.1%
Bolting cloth,
0.27% Drive belts, Paper making fabric,Industrial filtration
5.38% 2.2% products,
Others, Industrial
8.63%
Decatising cloth, 0.17% webbing and
Computer ribbon,
0.38% Conveyor belts, slings, 1.61%
7.36% 3.28%
Coated abrasives constitute the largest (24.98%) share of the International Indutech market in 2019-20,
followed by Glass Fabric (15.54%).
Figure 9.18: Production vs. Consumption of Indutech segment in the domestic market (Rs. Crores)
23,660
22,121
20,904
19,404
18,499
17,021
16,371
14,488 14,931
12,821 13,097
11,489
2019-20 2020-21 2021-22 (E) 2022-23 (E) 2023-24 (E) 2024-25 (E)
The consumption of Indutech products in India exceeds the production (estimated value at Rs. 11,489 Crores
in 2019-20). India is a net importer of Indutech and is likely to remain so till 2024-25 except that the trade
deficit percentage will be reduced during this period.
________________________________________________________________________________________________

___________________________________________________________________________________________________
Table 9.8: Indutech - World and India Market Size 2019-20

AGM glass battery separators 2,257 882 6.00%
Bolting cloth 78 61 12.01%
Cigarette Filter Rods 2,249 586 4.00%
Coated Abrasives 7,282 2,267 4.78%
Computer Ribbon 469 367 12.02%
Conveyor belts (TT component) 2,146 699 5.00%
Decatising cloth 111 58 8.02%
Drive belts (TT component) 1,569 511 5.00%
Industrial filtration products 2,515 983 6.00%
Industrial webbings and slings 957 561 9.00%
Paper making fabrics 642 460 11.00%
Printed circuit boards (TT component) 322 42 2.00%
Ropes and cordages 3,979 2,073 8.00%
Glass Fabric (as part of Composites - TT 4,531 3,246 11.00%
Part)
Others 50 25 7.67%
Total 29,157 12,821 6.75%
9.7.1 AGM glass battery separators

Absorbed glass mat batteries are maintenance free alternative to traditional flooded lead-acid batteries. They
provide powerful bursts of starting current and run electronic devices for a longer duration. AGM batteries are
non-flammable, have a long shelf life, are safe, and release high energy. They have a significant market in
automotive, marine, energy storage, telecom, and off-grid as well as power-backup industries. Battery
separator is a porous sheet placed between the positive and negative electrodes in a liquid electrolyte, a gel
electrolyte or a molten salt battery. Its function is to prevent physical contact of the positive and negative
electrodes while serving as an electrolyte reservoir to enable free ionic transport. According to the structure,
the separator can be divided as micro porous and non-woven. The battery separators are made of PVC, PE
and non-woven glass mats (Absorbent glass mats or AGM). The glass mats are known as AGM (Absorbable
Glass Mat). The battery separator market is dominated by PVC although there is a gradual migration to PE
separators. In India, the storage battery industry is slowly shifting from PVC separators to Polyethylene
separators. Glass mat with PVC or polyethylene is mostly used in all industrial batteries and in a few cases in
automobile batteries depending on the function, customer requirement and price. AGM batteries are preferred
option for high-end and advanced fuel-efficient vehicles with large power demands, need for greater reliability
and longer life. The product is mostly imported by India.
Leading manufacturers in India are Raman Fibre Science Pvt. Ltd. and Urja Products Pvt. Ltd., which was
recently acquired by US-based Hollingsworth & Vose Company (H&V).
________________________________________________________________________________________________

___________________________________________________________________________________________________
Major international players are Clarios, Power Sonic Corporation, Exide Technologies, C&D Technologies,
Fullriver Battery, East Penn Manufacturing Company, Universal Power Group, EnerSys, Nippon Sheet Glass
Co., Ltd, Ningbo Baiheng Science & Technology Co. Ltd., East Penn Manufacturing Co., FIAMM Energy
Technology S.p.A., Fengxin Industrial Co. Ltd., ShanDong Renfeng Special Materials Co. Ltd., B&F Technology
Limited, Hollingsworth & Vose, and Hokuetsu Corporation
India’s share in the global AGM glass battery separators market stood at 6% with a market size of Rs. 882
Crores during 2019-20. It is expected to grow at a CAGR of 15% and is likely to be worth Rs. 1,774 Crores in
the year 2024-25. The size of the world market was US$ 2,257 Million in 2019-20 and it is expected to grow
to US$ 2,880.57 Million at a CAGR of 5% for the next five years.
9.7.2 Bolting Cloth

Bolting cloth is a mesh fabric used primarily for screen printing in textile industry. The fabric also has
applications in filtration in pharmaceutical industries and in filtering oil. Indian textile industry depends on
imported Bolting Cloth to meet nearly 40 percent of its domestic requirements.
Leading international companies manufacturing Bolting cloth are Sefar AG, Bonfilt Industry Co. Ltd., Hebei
Hanze International Trade Co. Ltd., Taizhou Haotian Industrial Fabric Co. Ltd., Shijiazhuang Gezi Screen
Manufacturing Co. Ltd., TNS Enterprises Inc., Saati S.p.A.. Some of the Indian manufacturers of Bolting cloth
are Bombay Bolting Centre, Surat Bolting, Khanna Bolting, Mithil Corporation, Biyani Industrial Textile (P)
Limited, Deekay Nylobolt Industries Pvt. Ltd., Tejas Fabrics and Sur Syntex Pvt. Ltd.
The Indian market size for Bolting Cloth was Rs.61 Crores in 2020 and is expected to grow at a CAGR of 4%
for the next five years to Rs. 74.22 Crores in 2024-25. The global market will rise from US$ 78 Million at a rate
of 3% till 2024-25 and reach US$ 90.42 Million.
9.7.3 Conveyor Belts

Conveyor belts are used to move unit loads individually and bulk loads continuously. Conveyor belts are used
in mining, cement manufacturing, power generation, recycling, metal processing and many other industries.
Belting fabrics are used for reinforcing conveyor belts. The textile reinforced rubber conveyor belts carcass is
made from nylon and polyester blends, providing high strength, along with exceptionally good abrasion and
fatigue resistance.
With fast-paced development, Asia Pacific region is likely to

dominate the global market for belting fabrics. Investments and
growing consumption in the steel industry is also triggering the
growth. The key manufacturers of conveyor belting solutions in India
are Madura Industrial Textiles, Sempertrans Nirlon, International
Conveyor Belting Ltd., Fenner India Pvt. Ltd., Jonson Rubber
Industries Ltd., Sanrhea Technical Textiles Ltd., SRF Ltd., Forech
India and NRC. Some of the companies that manufacture conveyer
belt fabric in India are SRF Ltd., Forech India, NRC Ltd. etc. Some of
the global players in the rubber conveyor belt market are Yokohama, Trelleborg, Oxford Rubbers, Garlock,
Lutze, Artego, Bridgestone, ContiTech, Bando and Fenner.
________________________________________________________________________________________________

___________________________________________________________________________________________________
India’s share in the conveyor belts (TT component) market stood at 5% with a market size of Rs. 699 Crores
during 2019-20. It is forecasted to grow at an annual rate of 15% and is likely to be valued at Rs. 1,406
Crores in 2024-25. The world market size was worth US$ 2,146 Million and is expected to be worth US$
2,674.31 Million as a result of growing at a CAGR of 4.5% till 2024-25.
9.7.4 Decatising Cloth

Decatising cloth, sometimes called Decatising wrapper is a technical textile fabric that is used in Decatising
machines. The fabric is an integral part of both Open Decatising and Kier Decatising machines that are mainly
used for mechanical finishing of woven fabrics. Decatising cloth is mainly consumed by shirting and suiting
pieces, with suiting bringing in the higher share of value. Thus, the growth of this segment is tied with the
growth of suiting market in India.
Decatising cloth is a polyamide/cotton or polyester/cotton blended woven fabric available in weights ranging
from 400 gsm to 600 gsm. Key manufacturers of Decatising Cloth in India are Hrishikesh Textiles, Noor
Textiles, Panipat, Marino Textiles and Bombay Dyeing Ltd. About 10% of domestic requirement is imported
whereas no exports take place.
The consumption of Decatising Cloth in India is worth Rs. 58 Crores in 2019-20 and is expected to grow at a
CAGR of 5% and will be worth Rs. 74.02 Crores by the year 2024-25. The global market is valued at US$ 111
Million in 2019-20 and will increase at CAGR of 3% to log a sale of US$ 128.68 Million in 2024-25.
9.7.5 Drive Belts

A belt drive includes one pulley on each shaft and one or more continuous belts over the two pulleys. These
belts are generally made with synthetic rubber matrix enclosed in a fabric reinforced rubber lining. Woven
fabric or cord that is reinforced as ply in the drive belt is made of polyester, nylon, and cotton. The
transmission belts can be classified as flat, vee, poly-vee and Timing belts.
Main producers of drive belts in India include Fenner India, Pix Transmissions and Goodyear Ltd. Major global
belt drive manufacturers are Arntz Optibelt Gmbh, Belt Corporation of America, Dayco Products LLC,
Hutchinson Belt Drive Systems, Desch Antriebstechnik Gmbh, Schaeffler Technologies AG & Co. KG, Federal
Mogul Co., Belt Technologies Inc., Gates Corporation and Reynold Plc..
Market size of India in the belt drive market is at 5% of the global market. India’s market in 2019-20 is worth
Rs. 511 Crores, growing at a CAGR of 17% and is expected to grow to a size of Rs. 1,120.34 Crores by 2024-
25. The world market size was at US$ 1,569 Million which is estimated to grow at a CAGR of 4.60 % and
expand to US$ 1,964.63 Million by 2024-25.
9.7.6 Industrial Filtration Products

Industrial filters are used to remove solid, liquid, or gaseous impurities that contaminate subsequent industrial
processes. Based on application, industrial filters can be dry filters (which are used in cement, steel and
energy plants) and wet filters (which are used in pharmaceutical and chemical industries). Rapid
industrialization and urbanization, and infrastructural development activities in various developed and
developing countries, and need for industrial filters to lower or eliminate liquid pollution, are major factors
________________________________________________________________________________________________

___________________________________________________________________________________________________
expected to drive market growth. Among the filter media segments, the woven fabric segment accounts for
larger revenue share in the global market than the mesh filter media segment.
North America is the largest market for industrial filtration products due to emission regulations and people’s
high preference for clean indoor air facilities. Its market in India is at a very nascent stage with few
manufacturers such as Khosla Profil Pvt. Ltd., Masturlal Chemfab, Industrial filters Ltd., Supreme Industries
Ltd., SVM Nonwovens BWF India. Leading international players are Alfa Laval, Donaldson, Danaher, Parker
Hannifin, Eaton, Ahlstrom-Munksjö.
India’s Industrial filters market is valued at Rs. 983 Crores in 2019-20 and is 6% of the global market. It is
expected to be worth Rs. 2,155.18 Crores in 2024-25 after growing at an estimated CAGR of 17%. The world
market size stood at US$ 2,515 Million in 2019-20 and it is forecasted to grow at a CAGR of 5% for the next
five years and touch US$ 3,209.85 Million in 2024-25.
9.7.7 Industrial webbing and slings

Industrial webbings are lifting equipment made up of polyester, nylon, polypropylene, carbon fibre, para-
aramid fibre, UHMWPE and other material such as cotton and jute. For extreme applications, webbing is even
available in high-strength materials such as Dyneema® and Kevlar®. They are essential industrial
components used for logistics, construction, and freight handling. Some of the properties are high strength,
resistance to ultraviolet deterioration, water resistance, quick drying, easy cleaning, high tensile strength,
abrasion resistance, stretching and shrinkage resistance, chemical resistance, and mildew resistance. Slings
are made out of high tenacity polyester and are thus 100% Technical Textile.
Asia Pacific is the industry leader in terms of demand for use of industrial webbings with India, China and
Malaysia leading the industry. For India, imports are greater than exports and most of these happen from
China, Sri Lanka, Hongkong and Korea.
Major Indian players are Greenfield Industries, Ferreterro India Pvt. Ltd. and Protherm Engineering Pvt. Ltd.
Globally, the market is dominated by American Cord & Webbing Co. Inc. (ACW Co. Inc.), E. Oppermann
GmbH, Belt-tech, Narrowtex Australia Pty Ltd, Jiangsu Daxin Webbing Co. Ltd., Ohio Plastics Belting Co.,
National Webbing Products, Murdock Webbing Company Inc. and Tennessee Webbing Products.
India’s Industrial webbings and slings (TT component) market size was Rs. 561 Crores during 2019-20 and it is
poised to register a CAGR of 11% for the next five years and expand to be worth Rs. 945.32 Crores by the year
2024-25. During the same corresponding period, the global market is expected to grow from US$ 957 Million in
2019-20 to US$ 1,286.73 Million in 2024-25 at a growth rate of 6.1%.
9.7.8 Paper Making Fabric

Paper Making Fabric consists of large continuous belts of custom designed and custom manufactured,
engineered fabrics that are installed on paper machines and carry the paper stock through each stage of the
paper production process – pulp created and pressed to a mesh, dewatered, heated, and dried by paper-
making machines to make paper web. The types of fabrics are forming fabrics, press fabrics and drier fabrics.
________________________________________________________________________________________________

___________________________________________________________________________________________________
The paper making fabrics are made from polyester and polyamide wires which are woven to produce the
fabric. The demand for these fabrics is primarily driven by paper mills. With the advent of technology synthetic
material is being used to replace wire fabrics.
Key Indian manufacturers of paper making fabric are Voith paper fabrics Ltd. and Wire and Fabriks SA Ltd.
About 30 percent of domestic consumption is meant through imports.
India’s market size for Paper Making Fabric is valued at Rs. 460 Crores and it is forecasted to grow at an
annual rate of 5% and is likely to be valued at Rs. 587.09 Crores in 2024-25. The world market size was
worth US$ 642 Million and is expected to be worth US$ 708.82 Million as a result of growing at a CAGR of 2%
till 2024-25.
9.7.9 Printed circuit boards (TT component)

The Printed Circuit Board (PCB) is used to hold electronic components and the electrical connections among
them. The technical textile component used in the manufacture of printed circuit board is the woven glass
fibre fabric which is used as reinforcement and stuck to the board with epoxy resin. The glass fibre
impregnated resin called ‘prepregs’ is used to bind the copper foils to form copper laminated boards, called
laminates. The Technical Textile component of printed circuit board comprises a very small fraction (0.2%) of
its value.
The printed circuit board industry in India is yet to catch up with the rest of the World. India’s share of
production of the world PCB market is at a miniscule 0.3% - 0.5%. Almost the entire requirement of PCB is
met through imports. We can expect the market to grow at a healthy rate of 17%, however whether the
demand is taken up by imports or domestic production of Technical Textile remains to be seen.
Key manufacturer in the country for glass fibres to be used in PCB is AT&S Limited.
The Indian PCB (Printed Circuit Board) market reached a value of US$ 2.97 Billion in 2020; This equal to Rs. 20,790
Crores. So if TT component is 0.2% then the market size of TT of PCB is 42 Crores in 2019-20 which is poised to
grow at a CAGR of 15% to a sale of Rs. 84.48 Crores in 2024-25. The global market for the TT component of PCB
is US$ 322 Million in 2019-20 and shall grow at 4% per annum to US$ 391.76 Million. in 2024-25.
9.7.10 Ropes and Cordages

A rope is a group of natural or synthetic
yarns, strands or fibres twisted together into a
stronger form with high tensile strength and
are used for dragging and lifting. They can be
made up of natural fibres such as Manila
hemp, hemp, linen, cotton, coir, jute, straw,
and sisal. Some of the synthetic fibres used to
make ropes are polypropylene, nylon,
polyesters (e.g. PET, LCP, Vectran),
polyethylene (e.g. Dyneema and Spectra),
aramids (e.g. Twaron, Technora, and Kevlar)
and acrylics.
________________________________________________________________________________________________

___________________________________________________________________________________________________
Asia Pacific is the largest market for ropes and cordages with growing markets in India and China. Leading
Indian manufacturers are Garware Technical Fibres Ltd. (earlier Garware Wall Ropes Ltd.), Axiom Cordages
(which is an export-oriented unit) and Tufropes Pvt. Ltd. Prominent players in international markets are WireCo
WorldGroup, Cortland Ltd., Bridon-Bekaert, Southern Ropes, Magento Inc., Yale Cordage, LANEX a.s., Katradis
Marine Ropes Ind. S.A., Dynamica Ropes, Marlow Ropes Ltd. and Van Beelen Industrie en Handel B.V..
The market size for Ropes and Cordages in India is worth Rs. 2,073 Crores during 2019-20. The Indian market
is estimated to grow at a CAGR of 10% and touch Rs. 3,338.59 Crores by 2024-25. The global market size was
US$ 3,979 in 2019-20 and is forecasted to grow at a CAGR of 4.5% till 2024-25 and reach a value of US$
4,958.56 Million.
9.7.11 Coated Abrasives

An abrasive material is used to achieve a proper finish of the work piece by rubbing the surface of the work
piece. Abrasives are used in industrial applications like grinding, polishing, buffing, honing, cutting,
smoothening etc. The coated abrasives are of two types viz. Woven coated abrasives and Non-woven coated
abrasives. The base fabric used in abrasives is cotton, polyester and polyester blends which are processed to
obtain a suitable coated abrasives backing. The non-woven coated abrasives are made from abrasive grade
fibres.
The key manufactures of coated abrasives in India are Carborundum Universal Ltd. (CUMI) and Grindwell
Norton Ltd. These two companies contribute towards about 70% of India’s market. Wendt India Ltd. and
other small manufacturers contribute to the balance production in the country. India’s net imports(after
deducting exports) is close to Rs. 50 Crores in 2019-20. Prominent global manufacturers are 3M, Saint-
Gobain, Bosch, Hermes Schleifmittel, and the KWH Group.
The coated abrasives (TT fabric) market in India is around Rs. 2,267 Crores in 2019-20 and it is expected to
grow at a CAGR of 15% to an expected domestic market of Rs. 4,559.75 Crores in 2024-25. The global
market for coated abrasives is estimated at US$ 7,282 Million and is likely to reach a value of US$ 9,293.88
after growing at a CAGR of 5% till 2024-25.
9.7.12 Computer Ribbon

The computer printer ribbon is a part of the printer cartridge of a Dot matrix printer (DMP). The ink on the
ribbon does get exhausted with use and ribbon is replaced as part of refilling the cartridge. The material used
for computer ribbon is fabric made from Nylon 6 yarn. Nearly 25% of domestic consumption is met through
imports from Singapore, Japan, China, Mexico and Vietnam.
The consumption of computer ribbon (TT fabric) in India is around Rs. 367 Crores in 2019-20 and it is
expected to grow at a CAGR of 2% to an expected domestic market of Rs. 405.20 Crores in 2024-25. The
global market for the same is estimated at US$ 469 Million and after growing at a CAGR of 1%, it is likely to
reach a value of US$ 492.92 Million after growing at a CAGR of 1% till 2024-25.
________________________________________________________________________________________________

___________________________________________________________________________________________________
9.7.13 Cigarette Filter Rods

Cigarette filters are used to cut down the amount of tar, smoke and other fine particles inhaled by the
smokers while smoking cigarettes. It reduces the strong effect of tobacco smoke on the throat. The filter is
made from cellulose acetate fibres known as tow. The fibres are bonded together using a hardener called tri-
acetin plasticizer. The filter is wrapped in a rolled paper and sealed with an adhesive. Filters are made by the
leading cigarette manfacturers like ITC Ltd. India does export a part of the production output of these filters.
Market size of Cigarette Filter Rods (TT component) in India for 2019-20 is Rs. 586 Crores, growing at a CAGR
of 8% and is expected to grow to a size of Rs. 861.03 Crores by 2024-25. The size of global market was at
US$ 2,249 Million which is estimated to grow at a CAGR of 6% and expand to US$ 3,009.67 Million.
9.7.14 Glass Fabric (as part of Composites-TT Part)

Composites are among the recent addition to materials used in production of a diverse range of items.
Composites act as a substitute to metals, plastics and wood for their better characteristics and environment
friendliness. They are produced by reinforcing a resin matrix (thermoplastic/thermoset) with fibres like glass
fibre, aramid, carbon fibre and/or natural fibres. Unlike conventional materials like steel, aluminium etc.,
composites are versatile and their properties can be designed as per the structural and functional aspects
required. Properties such as stiffness, thermal expansion etc. can be incorporated over a large range by using
appropriate fibre, resin and fabrication method. The technical textile material in the composites is the fibre
glass, aramid and carbon fibre. The main material for composites is Glass fabric and it dominates the
composites industry as a preferred reinforcement fibre, with a share of around 85%-90%. Other
reinforcement fibres like carbon fibre and aramid fibre are used to a much smaller extent in India because of
constraints placed by their patented technology and high costs.
Main manufacturers of composites in India are Owens Corning India, UP Twiga Glass fibres, Binani Industries
Ltd. (Goa Glass fibre), AIMS Composites Ltd., Mahindra Composites Ltd., Tata Composites Solutions Limited
and RG Fibrotech. Key global players are 3B-the fibreglass company, Engineered Fibers Technology, LLC,
Shanghai Dofiberone Composites Co.,Ltd., and, Chengdu Activated Carbon Group.
India’s market size for Glass Fabric (as part of Composites- TT Part) is valued at Rs. 3,246 Crores and it is
forecasted to grow at an annual rate of 14% and is likely to be valued at Rs 6,249.90 Crores in 2024-25. The
world market size was worth US$ 4,531 Million and is expected to be worth US$ 6,063.50 Million as a result of
growing at a CAGR of 6% till 2024-25.
________________________________________________________________________________________________

___________________________________________________________________________________________________
9.8 Meditech
Meditech are the medical application textiles made up of fibre, filament, yarn or fabric through the processes
of extrusion, spinning, weaving, knitting, nonwoven, braiding and bonding. Medical textiles are generally used
for human hygiene, healthcare, and other medical practice.
Technical textile products under Meditech segment are as follows:
1. Baby Diapers
2. Compression Garments
3. Cotton Buds
4. Extra Corporeal Devices (including Artificial Kidney)
5. Incontinence Diapers
6. Orthopedic implants (including artificial tendon, artificial joints, artificial ligaments and prosthetics)
7. Sanitary Napkins
8. Surgical Disposables (Non woven TT component)
9. Vascular Grafts
10. Medical Wipes
11. Dental Floss
12. Hernia Mesh
13. Disposable Bed-sheets, Curtains and Pillow Covers
14. Heart and soft tissue repair patch (TT component)
15. Surgical Suture
16. Heart Valve (TT component)
17. Underpads (TT component)
18. Surgical Dressings
19. Eyepads (TT component)
20. Compression Stockings
________________________________________________________________________________________________

___________________________________________________________________________________________________
Figure 9.19: Percentage contribution of Meditech products in the domestic market (2019-20)
Disposable bed
Surgical disposables sheets, curtains, and
(medical/surgical Surgical dressings,
pillow covers, 2.79% 30.74%
apparel/protective clothing),
3.34%
Compression
garments, 2.69%
Medical wipes
(antibacterial/antimicrobial/
disinfectant wipes), 3.76%
Sanitary napkins,
3.17% Surgical sutures,
27.52%
Baby diapers,
4.98% Others*, 7.54%
Orthopaedic implants (including

artificial tendon, artificial joints, Hernia mesh, 6.79%
artificial ligaments, and prosthetics),
6.68%
*Others include Extra corporeal devices and artificial kidney (dialyser)- 1.89%, Dental floss- 1.22%, Incontinence diapers- 1.14%, Heart valve-
0.84%, Vascular graft- 0.82%, Underpads- 0.59%, Compression stockings- 0.17%, Heart and soft tissue repair patch- 0.06%, Cotton buds- 0.04%,
Eyepads (TT component)- 0.01%, and Miscellaneous items- 0.76%
Surgical dressings (30.74%) constituted the largest share of the Indian Meditech market in 2019-20, followed
by surgical sutures at 27.52%.
Figure 9.20: Percentage contribution of Meditech products in the international market (2019-20)
Dental floss, 2.21%

Surgical disposables (medical/surgical
apparel/protective clothing), 7.21% Orthopedic implants (inluding artificial
Medical wipes tendon, artifical joints, artificial ligaments,
(antibacterial/antimicrobial/disinfectant and prosthetics), 2.01%
wipes), 14.01% Vascular graft, 3.77%
Sanitary napkins,
4.16% Hernia mesh, 4.96%
Incontinence diapers,
3.41% Disposable bed sheets,
curtains and pillow
covers, 7.99%
Baby diapers, 8.34%
Heart and soft tissue
repair patch , 7.52%
Others*, 2.31%
Surgical sutures,
Surgical dressings, Heart valve, 6.64% 13.86%
11.58%
*Others include Extra corporeal devices and artificial kidney (dialyser)- 1.06%, Compression garments- 0.54%, Underpads- 0.36%, Cotton buds-
0.12%, Compression stockings- 0.03%, Eyepads (TT component)- 0.01%, and miscellaneous items- 0.20%
________________________________________________________________________________________________

___________________________________________________________________________________________________
Globally, medical wipes contributed to the largest market share (14.01%), and surgical suture contributed the
next largest share at 13.86%.
Figure 9.21: Production vs. Consumption of Meditech segment in the domestic market (Rs. Crores)
12,550
11,421
10,999
9,564 9,846
8,136 8,317 8,488

7,861
7,317
6,308
5,891
2019-20 2020-21 2021-22 (E) 2022-23 (E) 2023-24 (E) 2024-25 (E)
Consumption of Meditech products exceeds the production (estimated value for 2019-20 is Rs. 5,891 Crores).
India is a net importer and the gap between production and consumption is expected to increase in the next
five years.
Table 9.9: Meditech - World and India Market Size 2019-20

World (US$ India
Product Name India’s share
Million) (Rs. Crores)
Baby Diapers (TT component) 2,104 392 2.86%
Compression Garments (TT component) 135 212 24.06%
Cotton Buds (TT component) 30 3 1.54%
Extra Corporeal Devices and Artificial Kidney 267 148 8.54%
Incontinence Diapers (TT component) 861 90 1.61%
Orthopedic implants (including artificial tendon,
artificial joints, artificial ligaments and 507 525 15.90%
prosthetics)
Sanitary Napkins (TT component) 1,050 249 3.64%
Surgical Disposables (Non woven TT
1,819 262 2.22%
component)
Vascular Grafts 950 64 1.04%
Medical Wipes 3,532 296 1.28%
Dental Floss (TT component) 558 96 2.64%
________________________________________________________________________________________________

___________________________________________________________________________________________________
World (US$ India

Product Name India’s share
Million) (Rs. Crores)
Hernia Mesh 1,250 534 6.56%
Disposable Bed-sheets, Curtains and Pillow
2,015 219 1.67%
Covers
Heart and soft tissue repair Patch (TT
1,896 5 0.04%
component)
Surgical Suture 3,495 2,163 9.50%
Heart Valve (TT component) 1674 66 0.61%
Underpads (TT component) 90 47 7.93%
Surgical Dressings 2,920 2,416 12.71%
Eyepads (TT component) 2 1 4.61%
Compression Stockings 8 13 25.91%
Others 50 60 18.43%
Total 25,214 7,860 4.79%
9.8.1 Baby Diapers

A diaper is a type of underwear that allows the wearer to urinate or defecate without the use of a toilet. It
absorbs or contains the waste and prevents soiling of the external clothing or environment. Diapers are
primarily worn by infants, toddlers and children who are not toilet trained or who experience bedwetting.
Baby diapers are made by sandwiching an absorbent pad between fabric sheets. The technical textile
component of the diaper is the nonwoven fabric which prevents fluid leakage and gives the diaper its desired
shape. Baby diapers are of two types – cloth diapers and disposable diapers. Emerging economies of the Asia
Pacific region including China, India, and Brazil and Central and South America promise ample growth
opportunities for the baby diapers industry. India imports huge volumes from China. Though India has started
exporting to neighbouring countries in recent years, it still remains a net importer of baby diapers.
Domestically, Indian diaper market is highly concentrated with top three manufacturers – Procter & Gamble,
Unicharm Corporation and Kimberly-Clark Corporation. There are other realtively smaller manufacturers too
viz. Essity AB, The Himalaya Drug Company, Nobel Hygiene Pvt. Ltd., Me N Moms Pvt. Ltd., Swara Baby
Products Pvt. Ltd., TZMO S.A., The ABENA Group. Major global players are Procter & Gamble (P&G), Kimberly-
Clark, Johnson & Johnson, First Quality Enterprises Inc., Hengan International Group Company Ltd., KAO
Corp., Philips Healthcare, Drylock Technologies NV, Cotton Babies, The Honest Co. and The Hain Celestial
Group.
The baby diaper market in India is expected to grow on account of expanding infant population, increasing
disposable income, rising awareness about the hygiene of babies, the growing number of women in the
workforce, the rising number of modern nuclear families with working parents and improved economic
conditions in India. Demand for diapers is growing steadily across India on account of their benefits such as
convenience, increased hygiene and low risk of skin damage. Some brands are enhancing their product
offerings so as to attract a larger consumer-base. For instance, manufacturers are introducing diapers with an
inner lining containing aloe vera gel, vitamin E, and other skin-friendly compounds often found in diaper rash
________________________________________________________________________________________________

___________________________________________________________________________________________________
creams to avoid rashes on the skin. In the last 20 years, the prices of baby diapers have fallen by half – from
Rs. 15-18 to Rs. 7-9 per piece, depending on the brand. Penetration of the category remains under 5 percent
in the country.
According to Euromonitor, the size of the organised baby diaper market in India is Rs 52.14 billion in the year
2019, with the year-on-year rate of growth pegged at 14% and the nonwoven technical textiles part is 4% of
the diaper value. Therefore, the technical textiles component of India’s baby diaper market is Rs. 391 Crores
during 2019-20. It is projected to grow at a CAGR of 11.9% and be worth Rs. 686.68 Crores in 2024-25. The
corresponding global market size was US$ 2,104 Million which is likely to expand at a CAGR of 6% and be
valued at US$ 2,815.63 Million by the year 2024-25.
9.8.2 Compression Garments

Compression garments are clothes designed to reduce recovery time and help improve performance. They are
usually worn by patients who sustain a burn injury and wear compression garments post-surgery so as to
avoid swelling and to ensure proper skin tightening. These are skin-tight apparels, which stimulate blood
circulation and stabilise muscles by exerting pressure on specific parts of the body. These garments include
compression stockings, sleeves, body shapers, girdles & binders and chin straps. These are also used to
manage and prevent various medical disorders such as venous disorders, deep vein thrombosis (DVT), sports
& recreational injuries, oncological treatments, and follow-up therapy after surgeries. These are also being
used post liposuction surgeries in India. These garments apply pressure on the treated body part and prevent
bacterial growth. They are custom made to the size of the patient.
Major players from India are Adidas AG., ASICS Asia Pte. Ltd., Leonisa, LIPOELASTIC, New Balance,
Technomed India Pvt. Ltd. and Nomura DND whereas the prominent producers at the global level are
Bauerfeind, 3M, Macom Enterprises, Bioflect Medical Group, Leonisa, LIPOELASTIC, Lohmann and Rauscher,
Medico International, Essity, Medtronic, Nike, Adidas, Design Veronique, BSN medical, Marena Group, Julius
Zorn GmbH, medi GmbH & Co. KG., Sigvaris Management AG. and Medico International Inc.
North America, followed by Europe and Asia Pacific, is the leader in the global compression garments market.
The Global compression garment and stockings market is US$ 3,072.85 Million in 2021 and expected to grow
at 5.35% to US$ 3,987.62 Million by 2026. Based on the figures and estimates provided by leading global
market research agencies, we assume US$ 3 billion as the market size for compression garment and stockings
globally in 2019-20. Out of this, 90% of the value (US$ 2.70 billion) will be for compression garments, 5% of
this value is the TT component as per the experts. Therefore, the world market size stood at US$ 135 Million
and is likely to grow at a CAGR of 5.6% till 2024-25 and touch US$ 177.28 Million in 2024-25. The
corresponding market size in India is estimated at Rs. 211.50 Crores during 2019-20 and it is forecasted to
grow at a CAGR of 1% so as to be worth Rs. 215.95 Crores by 2024-25.
9.8.3 Cotton Buds

Cotton buds are commonly used for cleaning the ear by removing earwax, providing first-aid, applying and
cleaning cosmetics, general skin cleaning, as well as in arts and crafts. Cotton buds consist of small wads of
treated and processed absorbent cotton or swabs that are wrapped around a rod made of wood, paper, or
plastic. The cotton bud which has a single tip wrapped on one end of a wooden or plastic handle is commonly
________________________________________________________________________________________________

___________________________________________________________________________________________________
meant for medical use (cleaning of skin, wounds and application of medicines and ointments) and is the most
prominent cotton buds. The cotton buds that are used for non-medical (often household purposes) are usually
about 3 inches long, and have cotton-wrapped tips at both ends. The cotton buds are also used to take
the DNA samples by scraping cells from the inner cheek in the case of humans. The cotton swabs are used in
the construction of the plastic model kits while paintings. They are also frequently used for cleaning the laser
diode lens of an optical drive in conjunction with rubbing alcohol. In addition to this, they are used to clear the
large parts of the computer such as video cards and fans. There has been a phenomenal rise in use of
specialised cotton swabs for drawing samples from nasal and throat area for Covid testing during the period of
Corona Virus pandemic. With so many uses, the demand for cotton buds in the market is growing at a rapid
rate. Cotton buds or cotton swabs are classified into medical, makeup or industrial cleaning based on their
application.
There has been an increasing demand from governments, civil society and customers for replacing plastic
used in the rod of the cotton buds with biodegradable material. Rising environmental concerns, consumer shift
towards natural products, and risk associated with the chemically synthesized cotton buds has given rise to
the demand for 100% organic cotton buds across the globe. Several manufacturers have already introduced
environment friendly cotton buds manufactured from chemical free organic cotton and rolled paper as spindle.
Globally, companies have replaced plastic sticks with hollow paper sticks.
The Environment Ministry in India has notified the Plastic Waste Management Amendment Rules, 2021, which
prohibit specific single-use plastic items which have “low utility and high littering potential” by 2022. List of 12
items that are to be banned from July 2022 include ear buds with plastic sticks. While the industry is working
on alternatives to the plastic stick, replacing the plastic sticks with hollow paper sticks would require import of
a special kind of wood. And, that would be a costly proposition for India’s domestic manufacturers. Due to
these challenges, the industry is seeking about three years to find an indigenous solution and transition to a
biodegradable alternative. It is also seeking incentives or financial aid from the government for this transition
process.
Europe is the largest consumption centre of cotton buds. The market penetration for cotton buds is very low
in India as people still consider it to be a luxury product. Two major players in India are Johnson & Johnson
Ltd., which sells under its own brand name and Suparshva Swabs India which sells cotton buds under the
brand name of Tulips. Key players in the global market are Johnson & Johnson Pvt. Ltd., Muji Europe Holdings
Ltd., Unilever Plc., Organyc Italica, H3D, Desert Online General Trading LLC., Daiso Industries Co. Ltd.,
BAMBAW Azadea Group, Touch Wood Industries, Morrisons Ltd., Tesco Supermarkets Ltd., ASDA, Aidi Stores
Ltd., LIDL, Boots Company Plc., Superdrugs Store Plc. etc.
According to Verified Market Research, The Global Swab Market was valued at USD 722.09 Million in 2019 and
is projected to reach USD 1258.91 Million by 2027. India has a market size for TT component of cotton buds
(Total market about Rs. 50 crores) of Rs 3 Crores (4% of total market for cotton buds) during 2019-20. It is
expected to grow at a CAGR of 1% to reach a market of Rs. 3.06 Crores in 2024-25. The corresponding global
market size is estimated at US$ 30 Million during 2019-20 and it is likely to grow at a CAGR of 3.5% to reach
an estimated sale of US$ 35.63 Million in 2024-25.
________________________________________________________________________________________________

___________________________________________________________________________________________________
9.8.4 Extra Corporeal Devices and Artificial Kidney (Dialyser)

Those medical devices which support the patient from outside and are not implanted inside the body are
known as extra corporeal. The devices which are under this category are Dialyser (also called Artificial
Kidney), Artificial Liver and Artificial Lungs. The membrane or dialysers are 100% Technical Textile products
made up of polysulphane and polyacetate. A bioartificial liver device (BAL) is an artificial extracorporeal liver
support (ELS) system for an individual who is suffering from acute liver failure (ALF). Artificial lung gadgets
are used in babies and youngsters with lung disorders namely, pneumonia, meconium inhalation condition and
various other respiratory malfunctions. Along with utilizing conventional procedures (upper bar), artificial lung
(AL) support is initiated when the other treatment options, including mechanical ventilation (MV) are of no
help in improving the patient's condition.
India is a net importer of these devices. Nipro India Corporation Pvt. Ltd, a subsidiary of Nipro Corporation
Japan has set up an artificial kidney manufacturing plant in Shirwal, Pune. This is the only manufacturing plant
of artificial kidneys in India. Syntho Chirals Lifesciences Private Limited is the manufacturer of bio-artificial
liver support system. NIpro Corp Japan, Kawasumi Laboratories Inc., US Kidney Research Corporation
(USKRC), AWKAK Technologies Pte. Ltd., Asahi Kasei Medical Vo. Ltd. and Blood Purification Technologies Inc.
are some of the major global manufacturers of dialysers.
The key players of the global Artificial Lungs market are ALung Technologies, Breethe, Haemair, Lung
Biotechnology PBC, McGowan Institute for Regenerative Medicine, MedArray, Michigan Critical Care
Consultants, Miromatrix Medical, The Charles Stark Draper Laboratory and Xenios.
India’s market for TT component (membranes and filter material) of Extra Corporeal devices is worth Rs.
148.50 Crores during 2019-20. It is expected to grow to Rs. 295.61.34 Crores, progressing at a CAGR of
14.8% for the next five years. The world market size is estimated at US$ 267 Million in 2019-20 and it is likely
to be growing at a CAGR of 5% to expand to US$ 340.77 Million by 2024-25. This has been arrived at based
on Market research reports of MR agencies such as Allied as well as Euromonitor.
9.8.5 Incontinence Diapers

Incontinence diapers also known as adult diapers, are single use products designed to absorb and retain
fluids. These diapers help in coping with loss of bladder control in adults. They are widely used by adults
experiencing mobility impairment, incontinence, diarrhoea and dementia. It is manufactured using
polyacrylate granules, polythene films, breathable fabrics and super-absorbent chemicals. The non-woven
material is placed on top for a dry feeling. Based on type, they can be categorised into pad type, pant/pull-up
type, and tape on diapers. North America is the global leader in adult diaper market. Developing countries,
especially China and India, are poised for high growth in demand due to shifting lifestyles and habits as well
as rising occurrence of incontinence among their geriatric population.
The Indian market is dominated by Chinese imported adult diapers and the local manufacturers export mostly
to neighbouring countries like Sri Lanka, Nepal and Bangladesh. Major manufacturers of Incontinence Diapers
in India are Nobel Hygiene Pvt. Ltd. (Brand name- Friends Adult Diaper), Fibriltex Pvt. Ltd. (Care4 brand),
and Walmark Meditech Pvt. Ltd. The leading global players in this industry are First Quality Enterprises Inc.,
Kimberly-Clark Corporation, Attends Healthcare Products Inc., Procter & Gamble and Unicharm Corporation
________________________________________________________________________________________________

___________________________________________________________________________________________________
As per the figures estimated by leading MR agency, Orion, the adult diapers market size for the world was
valued at US$ 13.3 Billion in 2018 and was expected to reach US$ 24.1 Billion by 2026, registering a CAGR of
7.8% from 2019 to 2026. Therefore, the estimate for 2019-20 was US$ 15.51 Billion. Out of this 5.5% is TT
component amounting to US$ 861 Miillion in 2019-20. It will grow to US$ 1,253.42 Million by 2024-25. The
Indian market for TT component of incontinence diaper is estimated at Rs. 90 Crores in 2019-20 but will grow
at a CAGR of 14.8% to log a likely consumption of Rs. 179.16 Crores in 2024-25.
9.8.6 Orthopaedic implants (including artificial tendon, artificial

joints, artificial ligaments and prosthetics)
An orthopaedic implant is a medical device manufactured to replace a missing joint or bone or to support a
damaged bone while ensuring its stability and proper anatomical position. The medical implant is mainly
fabricated using stainless steel and titanium alloys for strength and the plastic coating that is done on it acts
as artificial cartilage. The most commonly used implants are Orthopedic Implants Plates, Locking Plates, Bone
Screws, Variable Angle Locking Plates, Bone Plates, Interlocking Nails, Wires & Pins, and Hip Prosthesis, etc.
The types of materials that are most often used in prosthetics are metals, polymers, and ceramics. The most
commonly used polymer in prosthetics is high-density polyethylene. It is the best material for prosthetic limbs.
Major global competitors in prosthetic market are Aikang Medical Holdings Co.,, Ltd., Arthrex, Inc., B. Braun
Melsungen AG, DePuy Synthes, DJO Global Inc., Exactech, Inc., Globus Medical Inc., JRI Orthopaedics Ltd.,
Medtronic PLC, NuVasive Inc., Smith & Nephew PLC, Stryker Corporation and Zimmer Biomet Holdings Inc..
Leading Indian manufacturers of artificial joints are TTK Healthcare in collaboration with Sri Chitra Tirunal,
Zealmax Innovations Private Ltd., Orthotech.
The global market for Artificial Joints estimated at US$ 19.2 billion in the year 2020, is projected to reach a
revised size of US$ 26.6 Billion by 2027, growing at a CAGR of 4.8%. The global prosthetics & orthotics
market size was estimated at USD 6.11 billion in 2020 and is expected to reach USD 6.39 billion in 2021. The
TT component of the total market is 2% of sum of US$19.2 billion and US$ 6.11 billion. Therefore, the global
market size of TT component of orthopaedic implants in 2019-20 was US$ 507 Million that will grow to US$
631.81 Million due to its growth at a CAGR of 4.5 % till 2024-25. The market size in India was valued at Rs.
525 Crores in 2019-20 and that will grow at a CAGR of 14.8% to Rs. 1,045.09 Crores by 2024-25.
9.8.7 Sanitary Napkins

Sanitary napkin is a feminine hygiene product which is used by women to absorb the menstrual flow and
prevent it from staining the body and the clothes and thus improving intomate hygiene. Sanitary napkins are
made by inserting an absorbent pad between fabric sheets. The technical textile component of the sanitary
napkin is the non-woven fabric which prevents leakage of menstrual discharge.
Most of the raw materials that go into making good quality sanitary napkins are not available in India, and
hence Indian manufacturers have to rely on imports with import duties up to 10% followed by IGST, which
add to the cost of the final product.
Sanitary napkins market in India has so far been dominated by multinational companies like Procter and
Gamble, Johnson and Johnson Ltd. and Kimberly Clark Lever Pvt. Ltd. The last few years have seen Indian
manufacturers also entering this space. Brands such as Stayfree and Carefree from Johnson & Johnson Ltd.
________________________________________________________________________________________________

___________________________________________________________________________________________________
and Whisper from Procter & Gamble cover close to 85-90% of the sanitary napkins market. The remaining
market is shared by Kimberly Clark Lever’s brand Kotex and Gufic Biosciences’ brand Shapers. Each of the
domestic companies such as Royal Hygiene Care, Actifit India Pvt. Ltd., Dima Products Pvt. Ltd. and Kaul
Impex. Pvt. Ltd. have a small share of the market. At the global level, some of the major players are Procter &
Gamble, Hengan International Group Company Limited, Kimberly-Clark Corporation, Edgewell Personal Care
Company and Kao Corporation.
According to a new report published by Allied Market Research titled, “World Feminine Hygiene Products
Market-Opportunities and Forecasts, 2015-2022,” the global feminine hygiene products market is expected to
garner revenue of US$ 42.7 billion in 2022. Therefore, for this analysis, the estimated global sale of feminine
hygiene products will be US$ 42 billion in 2020. The TT component of this would be approximately 2.5% of
the value as per the costing professional from the industry. Therefore, the global market size for TT
component of sanitary napkins in 2019-20 is estimated at US$ 1,050 Million and it is likely to grow at a CAGR
of 5% and reach US$ 1,340.10 Million in 2024-25. India’s corresponding market size is Rs. 249 Crores during
2019-20. It is forecasted to grow at a CAGR of 11.9% to reach a level of Rs. 436.74 Crores till 2024-25.
9.8.8 Surgical Disposables (Medical/Surgical Apparel/Protective

clothing)
Surgical disposables are used by hospitals and pharmaceutical companies to maintain hygienic and sterile
operations. They constitute surgical gloves, protective face masks, head wear, scrub suits, chemotherapy
gowns, footwear, drapes, aprons, boots, coveralls, eye gear and surgical gowns. They can be disposable as
well as reusables. Majority of Indian hospitals use cotton reusable surgical wear that needs to be sterilised
after every use. The growth of the market for surgical disposables is attributable to the increasing number of
surgical procedures, rising incidence of Hospital Acquired Infections (HAIs), growing prevalence of chronic
diseases leading to longer hospital admission, and the impact of COVID-19 outbreaks across the globe.
Leading global players are 3M, Ansell, Kimberly-Clark Worldwide, Inc., Delta Plus, Alpha Pro Tech, Cardinal
Health, Halyard Health, Lakeland Inc., Derekduck Industries Corp.,
Some of the prominent global players in the medical disposables market are Medline Industries Inc., Smith &
Nephew PLC, Bayer AG, BD, 3M, Ansell, Kimberly-Clark Worldwide Inc., Delta Plus, Alpha Pro Tech, Plasti
Surge Industries Pvt. Ltd., Tronex International Inc. and Cardinal Health. Producers of surgical disposables in
India are Ahlstrom Fibercomposites India Pvt. Ltd., 3M India, Thea-Tex Healthcare Pvt. Ltd., Mediklin
Healthcare Ltd., Magnum Medicare Pvt. Ltd., Sivshree Meditex India Pvt. Ltd. and Surgiwear India Ltd.
The global medical disposables market size was valued at USD 318.3 billion in 2020 and is expected to expand
at a compound annual growth rate (CAGR) of 16.7% from 2021 to 2028. The surgical disposables market is
11% of this and the TT component is a little over 5% of that 11% as per the experts. Therefore, the world
market for surgical disposables in 2019-20 is US$ 1,819 Million. It is likely to grow at 8% till 2024-25 and
expected to have a global market size of US$ 2,672.71 Million by 2024-25. The Indian market for Surgical
disposables is Rs. 262.50 Crores in 2019-20 and it is expected to increase with a CAGR of 10% and likely to
record sales of Rs. 422.39 Crores in 2024-25.
________________________________________________________________________________________________

___________________________________________________________________________________________________
9.8.9 Vascular Graft

A vascular graft is a surgical device that redirects blood flow from one area of the body to another by
reconnecting the blood vessels. Vascular grafting is most commonly done to bypass a complete or partial
blockage in an artery in order to improve blood flow to the organ supplied by the diseased artery. Synthetic
vascular graft materials are used to patch injured or diseased areas of arteries, for replacement of whole
segments of larger arteries such as the aorta, and for use as sewing cuffs (as with the heart valve). Expanded
polytetrafluoroethylene, Dacron® and polyurethane are the material that are often used as synthetic vascular
grafts. Polyurethane is better able to match the compliance of native vasculature.
Major global manufacturers of vascular graft are Medtronic PLC, Terumo Corporation, LeMaitre Vascular Inc.,
Getinge AB, Cook Medical, C.R. Bard, W.L. Gore and Associates Inc., Shanghai Suokang Medical Implants Co.
Ltd. and Getinge AB. TTK Healthcare in collaboration with Sri Chitra Tirunal Institute for Medical Sciences and
Technology, Trivandrum manufactures vascular grafts in India.
According to Grandview research study, The global vascular grafts market size was valued at USD 2.01 billion
in 2018 and is expected to witness a CAGR of 6.4% over the forecast period. So the size of Vascular Graft in
2020 is likely to be US$ 2.3 Billion and growth at 6.4%. The value of the global technical textile component
sale will be US$ 950 Million and it will grow at 6.4% to be worth US$ 1,295.48 Million by 2024-25. The
corresponding sale in India is worth Rs. 64.50 Crores in 2019-20, it will experience a CAGR of 10% and is
likely to reach a domestic sale of Rs. 103.79 Crores in 2024-25.
9.8.10 Medical Wipes (Antibacterial/Antimicrobial/Disinfectant

wipes)
Medical Disinfectant wipes are single
use products made of tissue, paper, or
nonwoven fabric and moistened with
antibacterial solution, typically packed
in canisters or tubes with a dispenser to
keep the antibacterial wipe moist, and
to be able to pull out a single wipe at a
time. Medical wipes are used for
cleaning and disinfecting the human
body, general object surfaces, medical
device surfaces and other object
surfaces. Healthcare wipes are of numerous types including pre-injection wipes, non-invasive antiseptic wipes,
skin cleaning wipes, macerator-friendly body wipes, and bath wipes. They can also be classified into sanitising
wipes, skin care wipes, equipment cleaning wipes and wound cleaning wipes.
Due to the high healthcare awareness of their people, the USA and Europe are two leading markets for wipes.
Due to their fast growing economies, increasing incomes and healthcare awareness, China and India are the
fastest growing markets for such products. Latin America, Middle East and Africa are the least lucrative
regions for the antibacterial wipes industry as people of these regions prefer to use antibacterial solutions over
________________________________________________________________________________________________

___________________________________________________________________________________________________
costly antibacterial wipes due to better affordability. India is a net importer of antibacterial wipes with major
imports from China.
There are many global players such as Claire Manufacturing, CleanWell LLC, Colgate-Palmolive Company,
Dreumex USA Inc., Reckitt Benckiser, The Clorox Company, Kimberly-Clark, GAMA Healthcare, Parker
Laboratories and 3M as well as some others which are prominent in Medical Disinfectant Wipes industry.
Rising global awareness regarding sanitation and personal hygiene and increasing cross-contamination
problems are expected to drive the demand for healthcare wipes. Major Indian players in the wipes industry
are Johnson & Johnson, Pristine Care Products Pvt. Ltd, Ginni Filaments Ltd, Kimberly-Clark, Himalaya Health
Care Pvt. Ltd., Kara Wipes by Aditya Birla Group and Tainwala Personal Care Pvt. Ltd. and Precot Meridian Ltd.
The global Medical Disinfectant Wipes market was valued at US$ 3,532 million in 2020 and will reach
US$ 4,726.61 million by the end of 2025, growing at a CAGR of 6% during 2020-2025. India’s market size for
medical wipes was valued at Rs. 295.50 Crores during 2019-20. It is likely to grow at a CAGR of 7.1% to be
valued at Rs. 416.62 Crores by 2024-25.
9.8.11 Dental Floss

Dental floss is a soft nylon thread used to remove food and dental plaque from between teeth where
toothbrush is not reachable. Based on type and usage, dental floss are classified into waxed floss, unwaxed
floss and dental tape. Waxed floss occupies a large market share because of its applicability in effective
plaque removal. These waxed dental flosses have added advantages as they contain essential oils and
enzymes, resulting in effective plaque removal. In addition, waxed dental floss is also available in a polymer
coating, which prevents shredding and provides effortless plaque removal. It is expected to hold a significant
market share for some years. The major reason for the growth of this segment is the rise in oral problems.
There are latest innovations wherein producers are focused on investing in natural wax ingredients to produce
and commercialise natural dental floss, made up of three natural waxes, namely, jojoba, carnauba, and
beeswax. This is causing a further increase in growth of the market.
Increasing consumer awareness regarding oral care and hygiene can be attributed to the increasing demand,
with North America being the largest market.
Major quantity of the Dental Floss is marketed in India by Colgate and Palmolive (India) Ltd., P&G under the
brand Oral B, ICPA Health Products Pvt. Ltd. and Sinhal Metal Industries Ltd. Some of the companies that are
dominating the global market are 3M Co., Procter & Gamble, Colgate-Palmolive Company, Johnson & Johnson,
Prestige Consumer Healthcare Inc., Dr. Fresh LLC, Lion Corporation, Church & Dwight Co. Inc., Shantou Oral
Health Co. Ltd., Water Pik Inc., Koninklijke Philips NV, Unilever Group and The Humble Co.
India’s has an estimated market size for dental floss (TT) at Rs. 96 Crores during 2019-20 and it is expected
to grow at a CAGR of 10 % and be valued at Rs. 154.48 Crores by 2024-25. The size of the world market size
was US$ 558.12 Million in 2019-20 and it is expected to grow at a CAGR of 5 % to touch US$ 712.32 Million
by 2024-25.
9.8.12 Hernia Mesh

Hernia Mesh is used in hernia repair and abdominal wall replacement, where mechanical strength and fixation
are very important. The functionality of the mesh is customised by adjustment of porosity and the texture of
________________________________________________________________________________________________

___________________________________________________________________________________________________
the mesh. There are two types of mesh, the woven and the knitted. Polypropylene or Polyester are often the
material used in making the mesh. GOR-TEX is also used for making mesh for hernia repair. Main factors that
are determining market growth are increasing incidence of hernia, favorable reimbursement policies and
technological advancements related to repair devices.
The global hernia repair devices market size was valued at US$ 3.49 billion in 2020 and is expected to expand
at a compound annual growth rate (CAGR) of 5.65% from 2021 to 2028. Hernia Mesh dominated this industry
with 76.1% of sales. Therefore, global sale of Hernia mesh in 2019-20 is estimated at US$ 2,655.89 Million
out of which TT component of synthetic Hernia Mesh is assessed at US$ 1,250 Million in 2019-20. This is likely
to grow at a CAGR of 5% and be valued at US$ 1,595.35 Million. Corresponding to this, the Indian market for
TT element of Hernia Mesh is Rs. 534 Crores in 2019-20 and it will grow annually at a rate of 5.2% to reach a
value of Rs. 688.01 Crores in 2024-25.
9.8.13 Disposable Bed Sheets, Curtains and Pillow Covers

Disposable bed sheets, curtains and pillow covers are innovative products which are specially designed to
provide comfort and infection control. Disposable bed sheets, curtains and pillow covers are one time use
materials. The disposable bed sheets reduce cross-contamination risks that come from laundering linen. They
are meant for hygiene and cleanliness purposes and are used in hospitals, diagnostic centres, nursing care
facilities, standalone clinics, beauty parlours, massage centres and very recently by ‘at home’ beauty and spa
services. There is a heightened demand across the world for hypoallergenic and eco-friendly disposable bed
sheets in hospitals, nursing homes and stand-alone clinics. Increasing awareness about health and hygiene in
India has led to a surge in growth of these products. The time taken by nursing staff to change disposable
linen is less than 10% of the time it takes to change conventional linen and that has led to increasing use of
disposable linen.
India’s import-export scenario for these medical disposable linen products is the similar to that of surgical
disposables. Leading Indian players for disposable linen are Ahlstrom Fibercomposites India Pvt. Ltd., 3M
Healthcare India, Thea-Tex Healthcare Pvt. Ltd., Mediklin Healthcare Ltd., Magnum Medicare Pvt. Ltd.,
Sivashree Meditex India Pvt. Ltd., Surgiwear India, Dispoline, Medline Industries Inc., BM plus spol. s r.o.,
Raaj Medisafe India Ltd., Jackson Care Product, EconoGroup, Venus Safety and Health Pvt. Ltd. and Beaucare
DermeandCo. . Globally, the market is led by Unitex Textile Rental Services Inc., Emes Textiles Pvt. Ltd.,
Angelica, Healthcare Services Group Inc., ImageFIRST, Tetsudo Linen Service Co. Ltd., Celtic Linen, Medline
Industries, Hygeco Group, Hartmann Group, Haines, Cardinal Health, Mlnlycke Health Care AB, The 3M
Company, Ecolab, Z Plus Disposable, Wuhan Morntrip Trading (Xiantao Tongda Non-woven Products),
Dispotech, SABIC, Teqler, SHNGEN, Changzhou Care-De Sanitary Material and Swisslog Holding Ltd.
Based on the market research by leading global agencies, the global disposable medical linen market will grow
from US$ 2,015 Million in 2020 to US$ 3,143.23 Million in 2025 at a CAGR of 9.3%. The India Disposable
Medical Linen Market size was estimated at Rs. 219 Crores in 2020 and expected to reach Rs. 282.16 Crores in
2021 at a Compound Annual Growth Rate (CAGR) of 5.2%.
________________________________________________________________________________________________

___________________________________________________________________________________________________
9.8.14 Heart and soft tissue repair patch

The heart and soft tissue repair patches are used in tissue repair procedures such as soft tissue, dural and
vascular repairs and reconstructions. Repair of inguinal hernias is one of the most commonly performed
general surgeries. Increasing prevalence of hernias is expected to lead to increase in market growth. Due to
increase in detection of congenital heart diseases such as ventricular septal defect, atrial septal defect and
common atrium, the cardiovascular and soft tissue repair patches market is expected to grow rapidly.
Cardiovascular and soft tissue patches are manufactured from Dacron, ePTFE and biomaterial.
The main global players in cardiovascular and soft tissue repair patches market are Cryolife, Edwards Life
Sciences, Bard Peripheral Vascular, Baxter, Admedus, Neovasc and Southernlight Biomaterials. India imports
these products to meet its requirement.
Global Cardiovascular and Soft Tissue Repair Patches (TT component) market size will grow from US$ 1,896.4
million in 2020 at a CAGR of 4.6% to US$ 2,374.59 Million in 2025. India is still a nascent market for such
patches and the estimated annual sale of Rs. 4.50 crores in 2019-20 will increase to Rs. 7.24 Crores in 2024-
25 due to a forecasted CAGR of 10% for this period.
9.8.15 Surgical Sutures
Surgical sutures also known as stitches are strands of surgical threads used to join blood vessels or tissues
and reduce the risk of bleeding and wound infection, enhance wound healing, improve scar aesthetics and
minimise tissue injury. They are used to close wounds such as skin ulcers, neuropathic ulcers, paediatric
cardiac surgery and diabetic ulcers. The sutures are made of natural or synthetic materials. Natural material
includes silk, linen and catgut, synthetic materials include nylon, polypropylene, and polybutester. The surgical
sutures are classified into two categories – absorbable suture that dissolves in the body and does not require
removal and non-absorbable suture that are sterilised sutures requiring removal after a specified time. Based
on the type of filament, the sutures market has been segmented into monofilament and multifilament sutures.
Multifilament accounted for the maximum market share. Based on application, the surgical sutures market is
divided into ophthalmic surgery, cardiovascular surgery, orthopedic surgery, neurological surgery, and others.
Cardiovascular surgery accounted for the largest market share.
The market for surgical sutures is experiencing steady growth due to increasing number of surgical
procedures being performed worldwide. Increase in prevalence of injuries and diseases in animals and rise in
awareness among pet owners for better treatment options are expected to enhance the growth of the market
for sutures. In addition to this, increase in population of livestock and upsurge in demand for dairy & meat
products are also driving the market. Increasing medical tourism is another key factor for the rise in the
number of surgical procedures. Asia Pacific is an emerging market with China, Japan, and India being the
major markets.
India is a net importer of surgical sutures. The surgical sutures market in India is dominated by Johnson and
Johnson Ltd. with its flagship Vicryl brand that has a market share of 60-65%, followed by other companies
such as Centennial Surgical Suture Ltd., Sutures India Ltd., Futura Surgicals Pvt. Ltd. and Lotus Surgical Pvt.
Ltd. Leading global companies are Medtronic, Ethicon, Smith & Nephew, Internacional Farmacéutica., Péters
Surgical, and Integra LifeSciences.
________________________________________________________________________________________________

___________________________________________________________________________________________________
As per Euromonitor, the global surgical sutures market is projected to reach US$ 4.9 billion by 2026 from US$
3.7 billion in 2021, at a CAGR of 6% from 2021 to 2026. Based on these calculations, the global market for
surgical suture in 2019-20 is worth US$ 3,495 Million and it shall touch a figure of US$ 4,677.10 Million in
2024-25. The market size of suture in India is estimated at Rs. 2,163 Crores in 2019-20 and expected to grow
at a CAGR of 10% till 2024-25 when it is likely to be worth Rs. 3,480.46 Crores.
9.8.16 Heart Valve

A Heart Valve allows blood to flow in only one direction through the heart. Blood passes through a valve
before leaving every chamber of the heart. These valves help to prevent the backward flow of blood. Key
global companies that make Heart Valves are Abbott, LivaNova PLC, CryoLife Inc., Edward Lifesciences
Corporation, Medtronic, Boston Scientific Corporation and Micro Interventional Devices Inc.. TTK Healthcare
Ltd. manufactures heart valves in India.
A well-researched report by Fortune Business Insights pegs the market value of global market of heart valves
at US$ 6.58 billion in 2018 and forecasts a CAGR of 11.7% between 2019 and 2026. Based on this, the global
market for Heart Valves in 2019-20 is estimated at US$ 8,151 Million. The technical textile component is 20%
of this and is at US$ 1,674.24 Million in 2019-20. It will grow to US$ 2,911.28 Million due to a CAGR of 11.7%.
The corresponding market size for India is estimated at Rs. 66 Crores in 2019-20 and based on a forecasted
CAGR of 10%, it is likely to grow to Rs. 106.20 Crores in 2024-25.
9.8.17 Underpads
The Hospital Underpad is a disposable nonwoven product used in hospitals as well as at home where
continuous or intermittent absorbing of fluid is required. Hospitals, nursing homes, and day care centers use
underpads to protect mattresses, cribs, chairs, sofas, recliners, wheelchairs and all sorts of products that they
don't want to get wet. Basically, anytime a wetness episode becomes prevalent, an underpad can keep the
area dry. These products are very popular in developed countries. They are largely imported into India for
domestic consumption and their usage is limited which may be due to less awareness about their benefits.
The main manufacturers of Underpads in India are Pioneer Hygiene Sales Private Limited, Jajoo Surgicals Pvt.
Ltd., Jackson Care Product, Kerg International Export Private Limited, Nobel Hygiene Pvt. Ltd., Kamal
Healthcare Products Private Limited, Sara Healthcare P Ltd., TZMO SA, Realcare Hygienic Products Private,
Paramount Surgimed Ltd. The key global players are Medline, Attends Healthcare, Avkare Inc., Becton
Dickinson, Briggs Corporation, Cardinal Health, Care Line Inc. Dynarex Corporation, Ehob, Encompass Group,
Fisher Scientific, Fresenius USA, Kimberly-Clark Corporation, Medtronic and Patterson Medical.
The world market for underpads in 2019-20 is valued at US$ 90.41 Million and it is likely to grow at a CAGR of
5% for next five years and reach a value of US$ 115.39 Million. The size of market in India is about Rs. 46.50
Crores in 2019-20 and Rs. 74.82 Crores in 2024-25. The expected CAGR is 10% during the five year period.
9.8.18 Surgical Dressings

Surgical dressing comes in the form of bandage or self-interactive material that cushions the blow of injuries
by applying compressed pressure to a wounded area that promotes healing and guards against further harm.
________________________________________________________________________________________________

___________________________________________________________________________________________________
The dressings are divided into acute wounds segment and chronic wounds segment. Some of the materials
under surgical dressings are rolled bandages, crepe bandages, plaster-of-paris bandages, absorbent gauze
pack, plaster, absorbent pads, surgical pads, cotton lint and eye pads.
The USA and Canada have dominated the surgical dressings market but countries such as India, Singapore
and China are growing substantially due to the changing lifestyles and medical tourism. There is a strong
demand for dressings in the country and due to lack of indigenous manufacturers of such dressings in India,
these are mostly imported.
Some of the key players operating in the wound dressings market in India include 3M Co., Smith & Nephew
PLC, Johnson and Johnson Services Inc., and B. Braun Melsungen AG. Leading global players are Medline
Industries Inc., Smith & Nephew, Advancis Medical, Acelity, Medtronic, Alliqua Biomedical Inc., 3M, Coloplast,
ConvaTec, and Inc. Mölnlycke Health Care AB.
The global surgical dressing market was valued at US$ 2.92 Billion in 2020 and is expected to grow at a CAGR
of 5.7% during the period upto 2024-25 and log expected sales of US$ 3,852.63 Million. India’s surgical
dressings market size was estimated at Rs. 2,416.50 Crores during 2019-20 and it is expected to grow at a
CAGR of 10% and be valued at Rs. 3,888.36 Crores by 2024-25.
9.8.19 Eyepads (TT component)

Eye pad is a patch of cotton that is worn over the eyes to prevent eye infections after ophthalmic surgery or
procedure. Health Spas also tie these on their clients during some of the therapies. Eye Pads usage is India is
subject to eye surgeries and the usage by spas. Each eye pad consumes about 2.5-3 gms of non woven (TT
component).
India has a market size for TT component of eye pads of Rs. 0.60 Crores during 2019-20. It is expected to
grow at a CAGR of 2.3% to reach a market of Rs. 0.67 Crores in 2024-25. The corresponding global market
size is estimated at US$ 2.05 Million during 2019-20 and it is likely to grow at a CAGR of 3.5% to reach an
estimated sale of US$ 2.43 Million in 2024-25.
9.8.20 Compression Stockings

Compression stockings are elastic hosiery garments applied to lower limb to achieve graduated compression.
They are used for management of venous hypertension, lymphedema, and venous ulcers to reduce edema
and aid return of venous blood to the heart. There has been a rapid increase in customer awareness and that
has been one of the major reasons for growth of garments and stockings market. The demand for
compression garments and stockings has also increased because athletes and sportspersons wear them to
avoid any kind of possible injury during an event.
Prominent producers of Compression stockings both at India as well as world level are Adidas AG. and Nike.
The global sale of compression stockings in 2019-20 is US$ 300 Million out of which about US$ 8-9 Million is
the technical textiles component (say US$ 8 Million conservatively) in 2019-20. It is likely to grow at a CAGR
of 8% to log sales of US$ 11.75 Million in 2024-25. The sales in India are assessed at Rs. 13.50 Crores in
2019-20 and likely to grow at CAGR of 1.4% and record a value of Rs. 14.45 Crores by 2024-25.
________________________________________________________________________________________________

___________________________________________________________________________________________________
9.9 Mobiltech
Mobiltech has applications in automobiles, railways, ships, aircrafts and spacecrafts. Mobiltech products can be
subdivided according to their visibility into two types - visible components and concealed components. The
visible components include seat upholstery, carpets, seat belts, headliners, airbags etc. The concealed
components include noise vibration and harness (NVH) components, tyre cords, liners, etc.
Technical textile products under Mobiltech are as follows:
1. Airbags (TT component)
2. Automotive interior carpets
3. Car body covers
4. Headliners (TT Component)
5. Helmets (TT Component)
6. Insulation felts
7. Seat belt webbing (TT component)
8. Seat cover fabrics
9. Sun visors / sunblind (TT component)
10. TT usage in airlines (upholstery and airline disposables)
11. TT usage in railways
12. Tyre cord fabric
Figure 9.22: Percentage contribution of Mobiltech products in the domestic market (2019-20)
TT usage in railways, Others, 14.10%

0.01%
TT usage in airlines
(upholstery and airline
disposables), 1.23%
Helmets (TT component), 1.53% Tyre cord fabric,

60.82%
Sun visors/sun blinds,
1.69%
Insulation felts (TT
component), 1.61%
Headliners, 0.74% Seat belt
webbing, 2.11%
Automotive interior
carpets, 2.21% Seat cover fabric, Airbags (TT
11.44% component), 1.83%
Car body covers,
0.67%
________________________________________________________________________________________________

___________________________________________________________________________________________________
Tyre cord fabric, the product with the largest share makes up nearly 61% of the domestic Mobiltech market in
terms of value of technical textile component.
Figure 9.23: Percentage contribution of Mobiltech product in the international market (2019-20)
TT usage in railways, Others, 9.63%

0.06%
Tyre cord fabric,
TT usage in airlines 15.87% Seat belt webbing,
(upholstery and airline 22.75%
disposables), 3.93%
Helmets (TT
component), 0.59%
Sun visors/sun blinds,
1.20%
Airbags (TT
Insulation felts (TT component), 5.26%
component), 6.50%
Headliners, 3.20% Car body covers,

Automotive interior
1.58%
carpets, 23.43%
Seat cover fabric,
6.01%
It is evident from the figure presented above that the product-wise share of international market is more
evenly spread across all of Mobiltech products.
Figure 9.24: Production Vs Consumption of Mobiltech segment in the domestic market (Rs. Crores)
18,274
17,618
14,959
14,085
12,544 13,042
11,834
11,164 10,868
8,945
8,282
7,669
2019-20 2020-21 2021-22 (E) 2022-23 (E) 2023-24 (E) 2024-25 (E)
The consumption of Mobiltech products in India exceeds their production (estimated value Rs. 7,669 Crores in
2019-20) and despite the percentage trade gap likely to become smaller, India will continue to remain a net
________________________________________________________________________________________________

___________________________________________________________________________________________________
importer of Mobiltech products for the next five years. However, the rapid expected growth in mobility market
will attract significant capacity addition in India’s domestic Mobiltech industry.
Table 9.10: Mobiltech - World and India Market Size 2019-20

Airbags (TT component) 1,910 204 1.64%
Automotive interior carpets 8,515 246 0.44%
Car body covers 576 75 2.00%
Headliners (TT Component) 1,162 82 1.09%
Helmets (TT Component) 216 171 12.17%
Insulation felts (TT Component) 2,361 179 1.17%
Seat belt webbing 8,267 236 0.44%
Seat cover fabrics 2,184 1,278 18.98%
Sun visors / sunblind 437 189 6.63%
TT usage in airlines (upholstery and 1,428 138 1.48%
airline disposables)
TT usage in Railways 20 2 1.23%
Tyre Cord Fabric 5,769 6,790 18.08%
Others 3,500 1,574 6.90%
Total 36,345 11,164 4.72%
9.9.1 Airbags (TT Component)

Airbags are gas-inflated cushions built into the steering wheel, dashboard, door, roof or seat of a vehicle that
use a crash sensor to trigger a rapid expansion to protect passengers from the impact of an accident. Airbags
are of three types – frontal, side and knee. The market is also segmented based on the airbag type as Driver
Airbag, Passenger Airbag, Side Airbag, Curtain Airbag, and Others. Curtain airbag has been the largest
consumer of airbag fabrics in the automotive industry. This airbag type is also likely to witness the highest
growth during the forecast period. Based on the yarn type, the market is segmented as Polyamide Yarn and
Polyester Yarn. Polyamide 6.6 is the most widely used yarn for making airbag fabrics and is likely to remain
the most dominant yarn type in the market. However, polyester yarn is expected to grow at a faster rate over
the next five years, owing to its lower cost and increasing adoption in the knee and curtain airbags, mainly in
the USA and Europe. The market in India for airbags is still underdeveloped but it is expected to grow due to
mandating of stricter passenger safety norms for the automobile industry.
The Indian airbag industry is serviced by Toyoda Gosei, Minda India Pvt. Ltd., Autoliv India Pvt. Ltd., Rane
TRW Steering Systems Ltd., Takata India Pvt. Ltd., Mobis India Ltd., Ashimori India Pvt. Ltd., Denso
International India Pvt. Ltd., Bosch Ltd., Continental India Pvt. Ltd. and Daicel Chiral Technologies India Pvt.
Ltd. . The airbag fabric is produced by Indorama Ventures Ltd. Globally, the market is dominated by players
such as Autoliv, Joyson Safety Systems, ZF Friedrichshafen, Toyota Gosei, Hyundai Mobis, UTT
Beteiligungsgesellschaft GmbH (Airbag fabric) and Denso.
________________________________________________________________________________________________

___________________________________________________________________________________________________
The market for airbag fabrics is estimated to reach an estimated US$ 2,311.5 Million in 2024. Therefore, the
likely sale of 2019-20 is US$ 1,910 Million (obtained by discounting expected sale of 2024 at the rate of 5.4%
to get present value). The global market for TT component of airbags was estimated at US$ 1,910 Million
whereas the Indian market stood at Rs. 204 Crores in 2019-20. The global market is expected to grow at a
CAGR of 5.4% and is expected to be worth US$ 2,484.49 Million by 2024-25 whereas the Indian market is
expected to grow at a CAGR of 23.4% and touch a market size of Rs. 583.38 Crores in the same year.
9.9.2 Automotive Interior Carpets

These are nonwoven technical textiles products which are produced primarily from polypropylene fibres.
These are characterised by high durability, tensile strength, high abrasion resistance, low inflammability and
good compression recovery along with low weight. These provide insulation, reduced noise, cushioning to the
feet of the driver and the passengers, avoid corrosion of the vehicle floor and prevent water and dirt from
entering the cabin. The carpets also improve the aesthetic appearance of interior of the vehicle. China and
India are among the major producers. Key destinations of Indian automotive interior carpets are China, Hong
Kong, Taiwan, UK, Germany, and USA.
Leading manufacturers in India are Uniproducts India, Bajaj Carpets, Hitkari Fibres and Supreme Nonwoven.
Major global players are Auto Custom Carpets Inc., Dorsett Industries, Hyosung Advanced Materials, Tru-Fit
Automotive Products Ptd./Ltd., Toyota Boshoku Corporation, Gahh LLC, Magna International Inc. and Lear
Corp.
Based on the Market Research estimates by leading agencies, the global market for technical textile
component of automotive interior carpets was US$ 8,515 Million whereas the Indian market stood at Rs.
246.40 Crores in 2019-20. The global market is expected to grow at a CAGR of 4 % to US$ 10,359.80 Million
in 2024-25 whereas the Indian market is expected to grow at a CAGR of 17.1% till 2024-25 and reach a
market value of Rs. 542.80 Crores in 2024-25.
9.9.3 Car body covers

Car covers are a fabric sheet roughly shaped like a car and these are used for protecting the car from any
damage. Car covers mainly offer support in protecting the vehicle from bird droppings, sap, dirt, dust, tree
leaves, moisture, UV rays, salty air, and other impurities. Furthermore, car covers aid in defending the car
from damaging sun rays, which may impair the inside electronic system of the car, such as air conditioning,
car stereo, and internal devices. The covers are made from a variety of fabrics including canvas covers, HDPE,
PVC reinforced cotton material and nylon. Car covers can be universal or custom made. While Europe and
North America account for a majority share of the market, increasing disposable income and rising living
standards across developing countries have given a boost to the car covers market.
India has a relatively small share of the global market, and the demand is domestically met by few players like
Coverwell India Ltd., Sri Rama Enterprises Ltd., Shakti Overseas Ltd., TPH Covers Pvt. Ltd. and Hemal
Enterprises.
Major leading companies globally are Covercraft Industries LLC., Coverking Inc., Budge Industries, Polco Pvt.
Ltd., Confezioni Andrea Italia SRL, Lund International Inc. (Rampage Products), California Car Cover Co.,
MacNeil Automotive Products Ltd., Classic Additions Ltd. and Lanmodo.
________________________________________________________________________________________________

___________________________________________________________________________________________________
In 2019-20, the Indian market for car body covers was estimated to be worth Rs. 75.20 Crores as compared to
the global market which was worth US$ 576 Million forecasted to grow at CAGR of 3% till 2024-25 when
expected market size is likely to be US$ 667.75 Million. Even though the current market size of Indian market is
2.51 % of the size of global market, the Indian market is expected to grow at a CAGR of 9.7% to reach Rs.
119.97 Crores by 2024-25.
9.9.4 Headliners (TT component)

A headliner is a foam-backed cloth covering, attached to a vehicle ceiling with a strong adhesive. It provides
safety, gives comfort, offers heat insulation and provides resistance to water and noise absorption. In addition
to the automobiles, these are also used in spacecraft, boats, aeroplanes, satellites, and trains. A typical
headliner consists of multiple layers, including foam material that's usually polyurethane. Many headliners
consist of a tricot knit fabric that is napped to provide a soft touch and uniform appearance. The fabric is
adhered to melted polyurethane foam. The foam is sprayed or glued to a headliner board that mounts to the
inside of the roof, which can make the headliner softer to the touch. Perforated vinyl, synthetic cloth, cotton-
napped cloth and foam-backed cloth are some of the cloth headliners that are frequently utilized.
Leading manufacturers of headliners in India are Krishna Maruti Ltd. and Multivac India. Major players in the
international market are Grupo Antolin-Irausa S.A., Toyota Boshoku Corporation, Kasai North America Inc.,
Sage Automotive Interiors, Motus Integrated Technologies, UGN Inc., International Automotive Components
(IAC) Group, S.A.Howa Co. Ltd., UGN Inc., SA Automotive, Hayashi Telempu Corporation, Freudenberg
Performance Materials, Inteva Products LLC and IMR-Industrialesud SpA.
India’s market size for TT component of headliners (7% of value) is worth Rs. 82.40 Crores in 2019-20 and is
estimated to have a CAGR of 15% for the next five years and in 2024-25, value of annual sale in Indian
market is expected to be Rs. 165.88 Crores. The size of the world market is at US$ 1,162 Million which will
grow at a CAGR of 4.8% to touch US$ 1,468.97 Million by 2024-25.
9.9.5 Helmets (TT Component)

Helmets provide safety to two-wheeler automobile users by protecting the riders from head injury in the event
of an accident. It has a hard outer shell, adjacent padding, and a chin strap to hold it in place. A good quality
helmet is one which provides a high degree of protection, clear vision while driving and is breathable.
China has been a leading country in the production of helmets. Australia, India, and South Korea also have a
significant share of manufacturing facilities and demand. Some of the biggest Indian helmet brands are Vega
Aerostar, Steelbird, Studds and Wrangler. Some of the largest helmet manufacturing companies in the world
are Arai Helmet Ltd., Chih Tong Helmet Co. Ltd., Lazer S.A. and Nolangroup S.p.A.
The market for helmets (TT component) in India was worth Rs. 171.20 Crores in 2019-20 and is expected to
touch Rs. 360.60 Crores in 2024-25 due to a CAGR of 16%. The global helmet market was worth US$ 216
Million and is expected to grow at a CAGR of 6% to reach US$ 289.06 Million in 2024-25.
________________________________________________________________________________________________

___________________________________________________________________________________________________
9.9.6 Insulation Felts (TT Component)

Internal combustion engines generate a lot of heat throughout their combustion cycle. This can have a
negative impact when it reaches various heat-sensitive components such as sensors, batteries, and starter
motors. As a result, thermal insulation is essential to prevent the heat from the exhaust from reaching these
components. High-performance cars usually use thermal insulation as a means to improve engine
performance. Insulation felts are also known as NVH products (noise, vibration, and harshness parts). These
are meant for acoustic and thermal insulation inside the vehicle and to control noise emission on the outside.
They differ according to their application as floor modules, truck modules, wheels, roof module, and engine
casing module. Based on products, the market is bifurcated into PU Foam, Glass Wool, Elastomeric Foam, and
Others. Elastomeric foam followed by PU foam segment is accounted to hold the largest market share of
automotive insulation market.
The Asia Pacific region has emerged to be a major market followed by Europe, Middle East and Africa, North
America and Latin America. Leading Indian producers are Uniproducts India and Supreme Treves Pvt. Ltd.
While globally the market is dominated by ASF SE, 3M Company, Mitsui Chemicals, The DOW Chemical
Company, ExxonMobil Inc., Sumitomo Riko Company Ltd., Covestro AG, Huntsman Corporation, Celanese
Corporation, Lanxess AG and Borgers AG.
The global market for insulation felts in 2019-20 was worth US$ 2,361 Million in 2019-20 which is likely to
grow at a CAGR of 5.33% to US$ 3,060.95 Million in 2024-25. The Indian market for insulation felts is
relatively small and is worth Rs. 179.20 Crores. It is forecasted to grow at a CAGR of 16% till 2024-25 to
reach a market size of Rs. 377.45 Crores annually. There are negligible exports from India for insulation felts,
thus domestic consumption is the market size.
9.9.7 Seat Belt Webbing

Seatbelts are woven narrow fabric made from nylon filament yarns or high tensile polyester filament yarn
meant to secure passengers in a vehicle against harmful movements during collision or similar incidents, thus
minimising injuries during accidents.
The Asia Pacific region dominates the automotive seat belt market due to the presence of a large number of
vehicle manufacturers and rising vehicle manufacturing facilities all over the region. The market size and
production facilities in India are relatively low when compared to global seatbelts market.
Some of the Indian manufacturers are Goradia Industries, KSS Abhishek Safety Systems Pvt. Ltd. and Takata
India Pvt. Ltd. Major global players in automotive seat belt market are Autoliv Inc., Robert Bosch GmbH,
Denso Corporation, Continental AG., Hyundai Mobis., Toyoda Gosei Co. Ltd., Tokairika Co. Ltd., Beam's
Seatbelts, Belt-Tech, Louis Berger, Far Europe Inc., GWR and Seatbelt Solutions LLC.
India’s size of seatbelts market (TT component) is assessed at Rs. 236 Crores in 2019-20. It is expected to
grow at a CAGR of 16% and expand to Rs. 497.09 Crores by 2024-25. The world market size in 2019-20 is
valued at US$ 8,267 Million and which is likely to grow at a CAGR of 6% to touch US$ 11,063.11 Million by
2024-25.
________________________________________________________________________________________________

___________________________________________________________________________________________________
9.9.8 Seat Cover Fabrics

Car seat covers are meant to protect the original vehicle seat while providing comfort to the driver and
passengers. Resistance to abrasion, light and UV radiation are important for seat cover fabrics. They are
generally made up of polyester, real leather, artificial leather, and polymer foils. India and China have a high
demand for seat cover fabrics.
Leading Indian manufacturers of seat covers are Krishna Maruti Ltd., Saddles India Pvt. Ltd. Globally, the
market is dominated by Johnson Controls Inc., Coverking, Faurecia, Lear Corporation, Katzkin Leather,
Zhejiang Tianmei Auto Seat Cover Co. Ltd. and EuWe Group.
The seat cover fabrics market in India has a market size of Rs. 1,277.60 Crores in 2019-20. The likely CAGR
for seat covers market in India is going to be 15.8% to make the annual sales reach around Rs. 2,667 Crores
in 2024-25. The global seat covers market was worth US$ 2,184 Million and it is expected to grow at a CAGR
of 4.98% so as to log a sales of US$ 2,784.75 Million in 2024-25.
9.9.9 Sun visors/sunblind

A Sun visor/Sunblind is meant to be a sunroof on the front portion of the roof panel inside the vehicle cabin
that protects the driver and co-driver from direct sunlight and improves the visibility of the driver. It maintains
the interior temperature of the vehicle by blocking sun rays from entering inside the vehicle. It is composed of
several components such as mirror, padding, electric cable, flap, frame, and lights. It is made of mouded
substrates, metals, plastics, and fabrics. An increase in adoption of electric vehicles is expected to boost the
demand for sun visors as these offer protection to electric components inside such vehicles.
Sunvisors India Pvt. Ltd. and Sun-N-Shade Sunvisors Pvt. Ltd. are two Indian players in the sunblind industry.
Leading global players are Irvin Automotive Products Inc., Grupo Antolin, Grios s.r.o., Ototrim Sanayi ve
Ticaret A.Ş. Panel, Atlas Holding, Kasai Kogyo Co. Ltd., Howa Textile Industry Co. Ltd., Fompak, KB Foam
Inc., Dongfeng Electronic, Kyowa Sangyo, Daimei, KOBO GmbH & Co KG, Hayashi, IAC, Takata, Yongsan,
BRACE, Vinyl Specialities, Grios Sro, Mecai and Gumotex.
In 2019-20, the Indian market for sun visors / sunblinds (TT component) was worth Rs. 188.80 Crores as and
the global market was worth US$ 437 Million. The Indian market is expected to grow at a CAGR of 19.3% to a
size of Rs. 454 Crores by 2024-25 and global market is likely to witness a CAGR of 2% and it will grow to a
size of US$ 482.48 Million by 2024-25.
9.9.10 TT usage in airlines (upholstery and airline disposables)

Technical textiles are used in airlines industry. The upholstery and disposable items used in the aircraft
contain a sizeable proportion of technical textile component.
The global market for TT used in airline was estimated at US$ 1,428 Million in 2019-20 and is expected to
grow at 2% to record a figure of US$ 1,576.63 Million in 2024-25. The consumption in Indian market for
these items was worth Rs. 137.60 Crores and it is estimated to grow at a CAGR of 8.8% and be valued at
Rs. 209.26 Crores in 2024-25.
________________________________________________________________________________________________

___________________________________________________________________________________________________
9.9.11 TT usage in Railways

The seat covers in railways require a backing fabric which is the technical textile part. As per the railway
sources, India has a market size of Rs. 1.60 Crores in 2019-20. The likely CAGR for this market in India is
going to be 9.7% to make the annual sales reach around Rs. 2.55 Crores in 2024-25. The global seat cover
backing cloth market in railways was estimated to be worth US$ 20 Million and it is expected to grow at a
CAGR of 2% so as to log sales of US$ 22.08 Million in 2024-25.
9.9.12 Tyre Cord Fabric

Tyre cord fabric is an industrial fabric made up of high tenacity synthetic yarn cord. It provides reinforcement
to the tyre by strengthening its fundamental properties such as shape, load carrying capacity, abrasion
resistance etc. Different materials of tyre cord fabrics are nylon, polyester, rayon and other aramid fibres,
polyethylene napthalate (PEN), and hybrid. Nylon is the most widely used fabric followed by polyester.
Asia Pacific is the key market for tyre cord fabrics, globally, followed by Europe and North America. The
growth of tyre cord fabrics market is influenced by rising automotive tyres aftermarket due to the increasing
average life of vehicles and stringent emission regulations in Europe and North America.
Some of the major domestic players of nylon yarn are SRF Limited and Century Enka Ltd. Rest of the country’s
nylon tyre yarn demand is met through imports from countries like Russia and China. Major international
players are Indorama Ventures Company Ltd., Kolon Industries Inc., Hyosung Corporation, SRF Ltd., Kordsa
Teknik Tekstil A.S., Teijin Ltd., and Toray Industries Inc.
The global market for tyre cords was US$ 5,769 Million in 2019-20 and is expected to grow at 4% and gross a
sale of US$ 7,018.87 Million in 2024-25. The Indian market for tyre cords was worth Rs. 6,790.40 Crores and
it is estimated to grow at a CAGR of 8.8% and be valued at Rs. 10,326.95 Crores in 2024-25.
9.10 Packtech
Packtech includes flexible packing material made of textile used for packing various goods for industrial,
agricultural, consumer and other purposes. It ranges from polymer-based bags used for industrial packing to
jute-based sacks used for packaging food grains and packaging used for tea.
Technical textile products under Packtech segment are as follows:
1. FIBC (Jumbo Bags)

2. Jute Hessian and Sacks
3. Leno Bags
4. Polyolefin woven sacks
5. Soft luggage
6. Tea bags filter paper
7. Treated/ Coated Wrapping Fabric
8. Shopping Bags (Spun Bond, Non -Woven)
________________________________________________________________________________________________

___________________________________________________________________________________________________
Figure 9.25: Percentage contribution of Packtech products in the domestic market (2019-20)
Treated/Coated
Leno bags, wrapping fabric,
4.17% 8.28%
FIBC (jumbo bags),
7.47%
Jute, hessian and
other sacks,
33.08%
Polyolefin woven
sacks,
35.48% Soft luggage,
2.87%
Tea bag filter paper,

Shopping bags (spun 3.24%
Others,
bond, non-woven),
1.98%
3.43%
During 2019-20, the largest share of the domestic Packtech products market comprised Polyolefin woven
sacks (35.48%). The product category comprising second largest share was Jute, hessian and other sacks and
it made up nearly a third of the Indian market.
Figure 9.26: Percentage contribution of Packtech products in the international market (2019-20)
Treated/Coated
Leno bags, wrapping fabric,
3.67% Jute, hessian and
11.66% other sacks,
23.88%
FIBC (jumbo bags),
16.44%
Soft luggage,
5.35%
Polyolefin woven
Tea bag filter paper,
sacks,
2.53%
23.78%
Shopping bags (spun
bond, non-woven),
Others, 9.66%
3.04%
Jute Hessian and other sacks at a market share of 23.88% and Polyolefin woven sacks products at 23.78%
made up the two largest slices of the market in terms of value in the year 2019-20.
________________________________________________________________________________________________

___________________________________________________________________________________________________
Figure 9.27: Production Vs Consumption of Packtech in the domestic market (Rs. Crores)
66,790 67,332
64,845
62,956 61,495
59,342 61,123
57,614 58,567
55,778
53,122
50,592
2019-20 2020-21 2021-22 (E) 2022-23 (E) 2023-24 (E) 2024-25 (E)
The production of Packtech items in India is valued at Rs. 57,614 Crores in 2019-20 and it is valued at more
than what is consumed (Rs. 50,592 Crores) in India. India is a net exporter of Packtech products as of 2019-
20. However, the forecast suggests that due to the likely stagnation in traditional Packtech exports from India
and increase in imports of synthetic Packtech items, India may become a net importer of Packtech products in
the years to come.
Table 9.11: Packtech - World and India Market Size 2019-20
FIBC (Jumbo Bags) 4,537 3,778 12.79%
Jute Hessian and Synthetic Sacks 6,589 16,735 39.00%
Leno Bags 1,013 2,112 32.02%
Polyolefin woven sacks 6,562 17,950 42.01%
Soft luggage (TT Component) 1,476 1,450 5.09%
Tea bags filter paper 699 1,641 36.05%
Treated/ Coated Wrapping Fabric 3,217 4,190 20.00%
Shopping Bags (Spun Bond, Non - 2,666 1,736 10.00%
Woven)
Others 838 1,000 18.32%
Total 27,597 50,592 28.15%
________________________________________________________________________________________________

___________________________________________________________________________________________________
9.10.1 FIBC (Jumbo Bags)

Flexible intermediate bulk containers (FIBC), popularly known as jumbo bags, are one of the most cost
effective and ideal types of packaging for shipping and storing dry bulk products. Made up of either tubular or
flat polypropylene (PP) woven fabrics, these fabrics can be coated or uncoated and vary in terms of weights
depending upon the requirements of the safe working load (SWL) or safety factor (SF) of up to 1800 Kg..
They are commonly used to store dry and flowable products such as grains, seeds, salts, chemicals, sands,
clays, cement, and others. FIBC majorly finds application in various end-use industries including food,
chemical, pharmaceutical, building & construction, mining, and others.
Primary FIBC markets are the United States of America, European countries, Japan, China, India, Korea, Africa
and others. Indian manufacturers include Flexituff Ventures International Ltd., Isbir Mewar Bulk Bag Private
Ltd., Rishi FIBC Solutions Pvt. Ltd., Emmbi Industries Limited, Kanpur Plastipack Ltd. and Alpine FIBC Pvt. Ltd.
Some of the global manufacturers are Global-Pak, BAG Corp., Greif and Conitex Sonoco, Berry Plastics,
AmeriGlobe, LC Packaging International BV, RDA Bulk Packaging, Sackmaker, Langston, Taihua Group,
Halsted, Intertape Polymer, Lasheen Group, MiniBulk, Bulk Lift, Wellknit, Dongxing, Yantai Haiwan, Yixing
Huafu, Changfeng Bulk, and Shenzhen Riversky.
According to a new (2020) report by Grand View Research Inc., the global flexible intermediate bulk container
(FIBC) or Jumbo Bags market size is projected to reach US$ 6.4 Billion by 2026 from its current level of US$
4,537.37 Million, progressing at a CAGR of 5.9% over the forecast period. In keeping with this forecast, the
global market size in 2024-25 is likely to be US$ 6,042.94 Million. Based on the estimates provided by Indian
producers, the estimated consumption of FIBC in India is Rs. 3,778 Crores during 2019-20 and is expected to
increase at a CAGR of 4% and reach Rs. 4,596.51 Crores by 2024-25. India has captured about one-third of
the share of the world trade of FIBC even as the size of Indian market is about 13% of the world market.
9.10.2 Jute, Hessian and other Sacks

The global jute bag industry is currently at a nascent stage with encouraging growth aspects. The demand for
jute bags has witnessed a surge over the past few years, particularly in the European Union. This can be
attributed to the growing environment consciousness in the region. The imports of jute bags in non-producing
countries have also been facilitated by the ban on plastic packaging materials and bags. Additionally, the
benefits offered by jute bags such as their biodegradability, durability, low cost, high strength, etc. have
further supported the market growth.
Hessian is a breathable woven fabric made up of jute plant skin or sisal fibres that resists condensation and
associated spoilage of contents. Hessian is used in shopping bags, promotional bags, door mats, weather
protection sheets, ropes, book covers or pouches, gifts etc. It is 100% bio-degradable and recyclable. Hessian
products include hessian bags (food grain bags, shopping bags, promotional bags etc.), hessian mats, ropes,
yarn etc. Plastic (Polypropylene (PP)) bags are the substitute for hessian bags. But the negative
environmental effects of plastic bags give credibility to hessian bags over plastic bags. Hessian bags are food
grade, anti-static, easily allow fresh air (can keep food grains fresh). The Hessian fibres are often used to
make gunny sacks to ship agricultural produce. They are also used as wet covering to prevent rapid moisture
loss in the setting of cement and concrete in the construction industry and as sandbags for flood mitigation in
temporary embankments against floodwaters or field fortifications.
________________________________________________________________________________________________

___________________________________________________________________________________________________
Jute is cultivated in India, Bangladesh, East Asia and some parts of Latin America. Bangladesh, India and
Thailand account for over 90 percent of world jute production. India alone contributes for more than 70
percent of the global hessian production. Jute industry alone provides employment to 3.7 lakh jute mill
workers in India of which 2.5 lakh are present in West Bengal state (source: The Economic Times, May 20,
2021). In 1987, India passed the Jute Packaging Materials Act (JPMC), which made it compulsory for the
central government to purchase hessian or jute bags for supply and storage of food grain, sugar, fertilizer and
cement. Cement and fertilizers have now been removed from the list. And again in 2015, India once again
made and approved mandatory use of jute or hessian packaging for food grains and sugar. HDPE/PP bags are
cost competitive for jute or hessian packaging. Per kg cost of hessian bags costs around US$ 0.5 (Rs. 30),
while the cost of HDPE/PP bags is US$ 0.2 (Rs.12) per kg. As the government is bringing various schemes and
programs to educate public to use the jute or hessian packaging, the hessian packaging market is expected to
grow at a healthy growth rate.
Leading manufacturers of jute hessian in India are AI Champdany Industries Ltd., Bangalore Fort Farms Ltd.
and Budge Budge Company Ltd. The dominant players in the global hessian packaging market are Birla
Corporation Ltd., Cheviot Co. Ltd., Gloster Limited, AI Champdany Industries Ltd., Ludlow Jute & Specialities
Ltd., NYP Corp., S.L.Packaging Pvt. Ltd., Kankaria Group, India Glazes Ltd., Naylor Bag and Supply, and
Gyaniram Agarwal & Company Ltd.
The global jute bag, Hessian bags and other similar synthetic bags market is likely to have reached a value of
US$ 6.59 Billion in 2020 and is likely to grow at a CAGR of 4% in the coming years so as to clock an estimated
sales of US$ 8,016.53 Million in 2024-25. The market in India for all the bags of this category are expected to
have a sale of Rs. 16,735 Crores in 2019-20 and this is likely to witness a CAGR of 5% to reach a figure of Rs.
21,358.57 Crores in 2024-25.
9.10.3 Leno Bags

Leno bags are emerging as a better substitute to jute bags and are being increasingly used for packing and
preserving vegetables and fruits such as onions, potatoes, corn, pineapples, mangoes, coconuts etc. There are
many reasons for this preference. In Jute and Hessian bags, agricultural produce starts decaying after a certain
point of time due to the high moisture-absorption characteristic of jute. There is no such risk in leno bags. Also,
the market price of a leno bag is less than a Jute or Hessian sack. Leno bags offer easy visual inspection of
content stored inside it which isn’t possible in other bags. Additionally, nowadays, the manufacturers of leno
bags are ensuring that the bags are produced in such a way which acts as a barrier against fungus and insects.
These are light in weight and have appreciable tensile resistance. They provide advantages such as ease in
storage and handling of products and are chemically inert. They are also reusable and recyclable which makes
them environment friendly. Traditionally flat bags were the primary choice of food product packaging but with
advancement in material usage leno bags are significantly preferred for food packaging which requires oxygen
in order to increase the shelf life. Leno bags are made of polypropylene (PP), polyethylene (PE) and polyamide
(PA). BOPP polymer material is extensively replacing the polyamide material as it offers product strength.
Development in leno bags with fabric coating has resulted in increasing the physical strength of the product
thus ensuring a high demand for customized packaging solution to the food manufacturers.
India and China dominate the global market for leno bags. There has been a rise in demand and consumption
in Europe and North America. Most of the key players operating in the global leno bags market are from India
________________________________________________________________________________________________

___________________________________________________________________________________________________
including CTM Technical Textiles Ltd., Trinity Packaging, Meher International, Skill Dye Chem Pvt. Ltd.,
Balaajie Packaging, Kalna Hessian Bags Supply Co., Manokamna Polypack, Prime Industries, S.P.P. Food
Products Pvt. Ltd., Pack World, Megaflex Plastics Ltd., Innovative Polypack, Kalyani Polymers P Ltd., Singhal
Industries Private Limited, Mantram Technofab Private Limited, Sunbeam Lenopack Pvt. Ltd., Jaidayal Hitex
Private Limited, Leno Pack Industries Ltd. and Key Vee Monotex Pvt. Ltd. The main producers from outside
India are Yilsan Plastic Packaging Industry & Trade Co. Inc., Tan Dai Hung Plastic J.S. Co., LC Packaging and
Emballage Coderre Packaging Inc.
India’s market size for Leno bags in 2019-20 is estimated at Rs. 2,112 Crores and is expected to grow at a
CAGR of 15% to reach Rs. 4,247.99 Crores by 2024-25. The world market size is estimated by the industry at
US$ 1,013 Million and is forecasted to grow at a CAGR of 6% to log sales of US$ 1,355.62 Million in 2024-25.
9.10.4 Polyolefin Woven Sacks

Polyolefin is a thermoplastic resin material, produced by the polymerisation of propylene. It is one of the best
and the most cost-effective packaging solutions for industries like cement, fertilizer, sugar, chemicals and food
grains. Polyolefin bags and sacks market is classified as laminated polypropylene woven bags and non-
laminated polypropylene woven bags. Based on the end use, the market is segmented into building &
construction, agriculture & allied industries, food, retail and shopping and others. The USA. and Germany are
the biggest markets for the polypropylene woven bags & sacks industry.
Some of the leading Indian manufacturers are Ganpati Plastfab Ltd., Vardhaman Mills, Silvassa Woven. Major
global players are Printpak Inc., Emmbi Industries Ltd., Al-Tawfiq Company, Uflex Ltd., Mondi Group plc.,
Muscat Polymers Pvt. Ltd., United Bags Inc., Berry Global, Conitex Sonoco USA, Anduro Manufacturing,
Polytex, ProAmpac, Hood, Morris Packaging, Commercial Packaging, Vietnam HOAHA Co. Ltd., ObourPlast,
C.P. Poly-Industry Co. Ltd., Tan Dai Hung, Uflex, Palmetto Industries, Yameida Group, WenZhou Chenguang
Group, Nansu Group, Shouguang Jianyuanchunand Inc. and Palmetto Industries.
Polyolefin woven sacks have an estimated market Rs. 17,950 Crores in 2019-20 which is estimated to grow
with a CAGR of 4% to Rs. 21,838 Crores by 2024-25. The world market size is estimated by the industry at
US$ 6,562 Million and is forecasted to grow at a CAGR of 3% to log sales of US$ 7,607.16 Million in 2024-25.
9.10.5 Soft Luggage

Soft luggage bags such as totes, duffle, uprights, and sky bags are made out of woven fabrics such as nylon
and polyester that are light weight and durable. Woven textiles are tear-resistant, light weight, and offer high
tensile strength. Technical textile component is approximately 18% of final price, so whatever is the soft
luggage market, 18% of that will be the demand for TT element based on current technologies.
The India branded luggage bags market is dominated by three players, Samsonite, VIP Industries Limited and
Safari. In future, the Indian market is likely to be more competitive, due to more foreign brands planning to
expand their respective market shares. The leading global players in this product category are Tommy Hilfiger,
Delsey, Briggs and Riley, Rimowa, VF Corporation (Eagle Creek and Eastpak), Travelpro, Victorinox, Olympia,
Fox Luggage, Skyway, Traveler's Choice, ACE, Diplomat, Eminent etc.
The global consumption of technical textile component in soft luggage is assessed at US$ 1,476 Million in the
year 2019-20. The growth in travel and tourism will result in growth at a CAGR of 4% which is likely to result
________________________________________________________________________________________________

___________________________________________________________________________________________________
in a global market of US$ 1,795.78 Million by the year 2024-25. The annual sale in India is estimated at Rs.
1,450 Crores that is expected to grow at 10% per annum and touch a sale of Rs. 2,335.24 Crores in 2024-25.
9.10.6 Tea Bag Filter Paper

Tea bag filter paper plays a key role in the packaging of single-use tea. Tea bags consist of a filter paper
pouch with a thread, which holds the tea powder and a tag. This bag is dipped into hot water or milk and
allowed to steep. Tea bag filter paper is made primarily from special natural fibres found in Philippines. They
are further treated with heat sealable thermoplastics such as PVC or PP.
Tea filter paper is used to make tea bags to fulfil all consumer, household or business needs. Owing to the
increased consumption of ready-to-drink tea, the demand for tea filter paper used for making tea bags is
growing.
Asia Pacific is the largest consumer of tea bag paper, constituting more than 50% of consumption. Europe is
the second largest consumer. The two major marketers of tea bags in India are Hindustan Unilever Ltd. (HUL)
and Tata Tea Ltd. Glatfelter, Ahlstrom-Munksjö, Prico, Hebei Amusen Filter Paper, Pelipaper (Vezirkopru) are
the top 5 players in the global tea bag paper market.
The market size of Tea Bag Filter Paper in India for the year 2019-20 is estimated at Rs. 1,641 Crores and the
forecast for its growth rate is 8% so as to cause the annual sales to reach Rs. 2411.17 Crores in 2024-25. The
corresponding size of world market is estimated at US$ 699 Million which is likely to grow at a CAGR of 2%
and touch an annual sale of US$ 771.75 Million in 2024-25.
9.10.7 Treated/ Coated Wrapping Fabric

Treated / coated Wrapping fabric is made of unlaminated PP/HDPE, cotton canvas or woven fabric. It is
mainly used for wrapping large paper rolls, paper bundles, steel coils, tyres, yarn cones etc. There is another
type of wrapping fabric that is laminated which is used as lumber cloth. Lumber cloth is a wide width fabric
used to cover big wooden logs. It can be laminated either on one side or on both sides and formed as rolls.
According to the figures mentioned in the industry market research reports, global market value is estimated
at US$ 3,217 Million in 2019-20 and it is expected to progress at a CAGR of 4% over the next five years
resulting in a likely market size of US$ 3,913.97 Million. Based on the estimates provided by Indian producers,
the estimated consumption of Treated/ Coated Wrapping Fabric in India is valued at Rs. 4,190 Crores during
2019-20 and is expected to increase at a CAGR of 10% and reach Rs. 6,748.04 Crores by 2024-25.
9.10.8 Shopping Bags (Spun Bond, Non -Woven)

Shopping bags that are made from spun bond non-woven fabric are an important product of Packtech
segment of technical textiles. Key manufacturers of India include Hari Om Polypacks , Jhilmil Nonwoven,
Sidwin fabrics Pvt. Ltd.
India’s market size for Shopping Bags (Non-Woven) in 2019-20 is estimated based on industry feedback at Rs.
1,736 Crores and is expected to grow at a CAGR of 10% to reach Rs. 2,795.85 Crores by 2024-25. The world
market size is estimated by the industry at US$ 2,666 Million and is forecasted to grow at a CAGR of 5% to
log sales of US$ 3,402.57 Million in 2024-25.
________________________________________________________________________________________________

___________________________________________________________________________________________________
9.11 Protech
Protech are protective garments meant to protect the wearer from harsh external environmental effects at the
workplace such as firefighters, paramedics, emergency medical technicians, personnel responding to toxic spills,
workers in toxic environments, laboratory researchers and specialists cleaning up contaminated facilities etc.
Technical textile products under Protech segment are as follows:
1. Bullet Proof Jackets
2. Fire Retardant Apparel
3. Fire Retardant Fabrics for Furnishings
4. High Altitude Clothing
5. High Visibility Clothing
6. Industrial Gloves (TT Component)
7. Nuclear & Biological Protective Clothing
8. Chemical Protective clothing
9. Others (including Outer Protective Clothing)

Figure 9.28: Percentage contribution of Protech products in the domestic market (2019-20)
Bullet proof jackets, Fire retardant fabrics

Fire retardant for furnishings,
27.53%
apparel, 10.95%
3.20%
Chemical protective
Others (including clothing,
protective clothing), 1.37%
13.29%
High visibility
clothing,
Nuclear and 3.34%
biological protective
clothing, Industrial gloves,
0.74% 9.63%
High altitude
clothing,
29.93%
Domestically, High altitude clothing and Bullet proof jackets constitute the highest market share product
categories at approximately 30% and 28% respectively.
________________________________________________________________________________________________

___________________________________________________________________________________________________
Figure 9.29: Percentage contribution of Protech products in the international market (2019-20)
Bullet proof jackets, Fire retardant

Others (including 16.97% apparel,
protective clothing), 9.31%
5.86% Fire retardant fabrics
for furnishings,
14.15%
Chemical protective
clothing,
1.22%
High visibility
clothing,
Nuclear and
6.69%
biological protective
clothing, Industrial gloves,
1.36% 8.88%
High altitude
clothing,
35.58%
High altitude clothing comprises more than third of the global Protech market whereas Bullet proof jackets at
approximately 17% of share of global market form the second highest slice of global Protech market.
Figure 9.30: Production Vs Consumption of Protech in the domestic market (Rs. Crores)
5,100 5,119
4,637 4,759
3,966
3,672 3,794
3,400 3,449
3,148 3,135
2,850
2019-20 2020-21 2021-22 (E) 2022-23 (E) 2023-24 (E) 2024-25 (E)
Current value of production (Rs. 2,850 Crores in 2019-20) of Protech products in India is lower than their
consumption (Rs. 3,148 Crores in 2019-20). At present, India has to import its requirement of Protech items
and even though India will reduce its trade gap significantly, it will continue to remain a net importer of
Protech items till 2024-25.
________________________________________________________________________________________________

___________________________________________________________________________________________________
Table 9.12: Protech - World and India Market Size 2019-20

Bullet Proof Jackets (TT
1,898 867 7.01%
Component)
Fire Retardant Apparel 1,041 101 1.49%
Fire Retardant Fabrics for
1,583 345 3.34%
Furnishings
High Altitude Clothing 3,980 942 3.64%
High Visibility Clothing 748 105 2.16%
Industrial Gloves (TT
993 303 4.69%
Component)
Nuclear & Biological
152 23 2.36%
Protective Clothing
Chemical Protective
137 43 4.84%
Clothing
Others (including Outer
655 418 9.81%
Protective Clothing)
Total 11,187 3,148 4.32%
9.11.1 Bullet Proof Jackets

A ballistic vest or bullet-resistant vest, often called a bullet proof vest, is an item of body armour that helps
absorb the impact and reduce or stop penetration to the torso from firearm-fired projectiles and fragments
from explosions. The vest may come in a soft form, as worn by many police officers, prison guards, security
guards and some private citizens. Prison guards and police may also wear soft vests designed to resist
stabbing attacks, using metallic or para-aramid components.
Europe accounts for the largest market size of bullet proof jackets
market. It is due to governments’ liberal funding programme and
access to advanced technologies for the efficient production of bullet
proof jackets.
The major manufacturers for bullet proof jackets in India are Tata
Advanced Systems Ltd. (TASL), MKU Pvt. Ltd., SM Fabric Pvt. Ltd.,
SMPP Pvt. Ltd. and Anjani Technoplast Pvt. Ltd.
The key players of global bullet proof jackets are VestGuard, Point
Black Body Armor, Canarmor and Black Hawk. Other prominent
vendors are Wenzhou Start Co. Ltd., MKU Ltd., EnGarde, Infidel
Body Armor, Point Blank Enterprises Inc., MARS Armor, Vestguard,
Armourshield Ltd., BulletSafe and Compass International Corp. Ltd.
The estimated market size for technical textiles component of Bullet

Proof Jackets in India for the year 2019-20 is Rs. 866.70 Crores and
it is estimated to be growing at a CAGR of 17.4% and it is likely to
________________________________________________________________________________________________

___________________________________________________________________________________________________
reach Rs. 1,936.94 Crores by the year 2024-25. The size of world market is estimated at US$ 1,898 Million in
2019-20 and the forecast for its growth rate is 7.1% per annum that will cause it to reach US$ 2,664.62
Million by 2024-25.
9.11.2 Fire Retardant Apparel

Fire retardant (FR) apparel provides protection against environment with likely fire hazards and safeguard
against splashes of welding, molten metal, electric arc flashes, and exposure to fire accidents in oil and gas
industry. They are manufactured using two methods: using chemical FR coating on natural fibre and using
inherent FR fibre. The former method has proven to be a medical hazard due to the toxic fumes emitting from
chemical coating. Due to the toxicity of chemical coating, the apparel made from fire retardant fibre is
becoming more common.
FR fibres have a special property wherein the molecules of such a fibre expand when these are subjected to
heat/flame, providing sustained and better protection to the person. Apparel made from such a fibre does not
lose its properties even after repeated washing and hence offers protection that is long lasting.
The construction industry is one of the main industries with a high demand for FR apparel to ensure
protection for its workers. In many countries including India, the respective governments are insisting on
implementation of guidelines to protect workers against fire hazards thus increasing the demand for FR
apparel. Companies in countries such as the USA, UK, China and India are focusing on the R&D of FR apparel.
Leading Indian manufacturers of fire retardant apparel are Mallcom India Ltd., Tarasafe International and
Chandramukhi Impex. Major global players in the flame retardant apparel market include 3M, Carhartt,
Kimberly-Clark Bulwark, Honeywell International Inc., Ansell, National Safety Apparel, Lakeland Industries,
Cintas and Williamson-Dickie Manufacturing.
The global market for FR Apparel stood at US$ 1,041 Million in 2019-20 and is expected to grow at a CAGR of
7.1% to US$ 1,461.47 Million by 2024-25. The Indian market for FR apparel was Rs. 100.80 Crores in 2019-
20. It is expected to grow to Rs. 225.27 Crores by the year 2024-25 at a CAGR of 17.5%.
1.11.3 Fire Retardant Fabrics for Furnishings

Fire retardant fabrics are either synthetic fabric made of fibres that have inherent fire retardant properties or
fabrics having a coating of fire resistant chemicals. These fabrics have properties that delay the spread of fire
or provide insulation against heat and flame thereby providing crucial extra time to the person using it.
Fire retardant (FR) furnishing fabrics are textiles that are designed to provide superior resistance to fire
compared to traditional materials. FR furnishing fabrics use either inherently resistant fibres or chemical
treatment on natural fibres. When exposed to heat/flame, the FR fibres swell and become thick thus providing
a protective barrier. Flame retardants in furnishings keep the public safe by preventing fires from spreading.
Defence, manufacturing, oil & gas, chemicals, and construction industries play an important role in the growth
in demand for the fire-retardant furnishing material.
Asia Pacific, especially China and India are expected to perform well in the coming years owing to rising
demand and production. Top producers in India are Seth Sons, AK Industrial Fabrics and Ginni Spectra Pvt.
________________________________________________________________________________________________

___________________________________________________________________________________________________
Ltd. Some of the top performing companies in the world are Albemarle Corp, Israel Chemicals Ltd., Lanxess
AG, Clariant International Ltd. and Nabaltec AG.
In 2019-20, the Indian market for fire retardant fabrics for furnishings was estimated to be worth Rs. 344.70
Crores as compared to the global market which was worth US$ 1,583 Million during 2019-20. The Indian
market is expected to grow at a CAGR of 7.4% to reach Rs. 488.82 Crores by 2024-25 and the global market
is estimated to increase to US$ 2,118.56 Million by 2024-25 at a CAGR of 6%.
9.11.4 High Altitude Clothing

High altitude clothing, also known as Extreme Cold Climate Clothing (ECCC), are used for protection against
extremely low temperature, strong winds, falling snow etc. It is used by security forces as well as the
mountaineering community. The clothing should be comfortable and yet fully protect the wearer from
inclemental weather. The high altitude clothing consists of jacket and windcheater, waist coat, trousers,
glacier cap, rappelling gloves and glacier gloves. The high altitude clothing needs to be waterproof and
moisture resistant, breathable, abrasion resistant, maintain high integrity. The material used for these clothing
is typically hydrophilic polyurethane coating or PTFE coating, Gore-Tex coating or Sympatex coating. The inner
jacket is usually made of fleece and rest of the items are 100% polyester.
High altitude clothing is imported mainly from USA, Canada, Australia, Switzerland, Italy, UK and China
since Kusumgar Corporates Pvt. Ltd. and Texplus Fibres Pvt Ltd. are the only Indian manufacturers for the
same. Major global players are Black Diamond Equipment SP AG, Mountain Hard Wear and Westcomb
Outerwear Inc.
In 2019-20, the Indian market for high altitude clothing was estimated to be worth Rs. 942.30 Crores as
compared to the global market which was worth US$ 3,980 Million. The Indian market is expected to grow at
a CAGR of 6.2% to reach Rs. 1,273.84 Crores by 2024-25 whereas the world market is estimated to grow to
US$ 5,075.30 Million by 2024-25 at a CAGR of 4.9%.
9.11.5 High Visibility Clothing

High visibility clothing has a luminescent property that makes it discernible from any background. It is worn
on the torso and arm area of the body by public safety personnel and workers working on road works and
railway construction. These usually are of yellow or orange colour and follow ISO 20471 standards. High
visibility clothing is classified into three types depending on its usage: type O (off road), type R (railways) and
type P (public safety).
Asia Pacific is the dominant and fastest growing high visibility clothing market with Europe being the second
largest market.
Leading manufacturers in India are V4you Group, Reflectosafe, Ramesh Trading Company, Rushabh
Enterprises and NexG Apparels LLP. Top manufacturers globally are Ansell, Honeywell, Lakeland Industries,
3M, ASATEX, Bulwark, Ballyclare, Kermel, National Safety Apparel, Nasco Industries, OccuNomix and True
North Gear.
The relevant market for technical textile component of high-visibility clothing in India is assessed to be worth
Rs. 105.30 Crores as compared to the global market which is estimated to be worth US$ 748 Million. The
________________________________________________________________________________________________

___________________________________________________________________________________________________
Indian market is expected to grow at a CAGR of 8.3% to reach Rs 156.57 Crores by 2024-25 whereas the
world market is estimated to grow to US$ 1050.13 Million by 2024-25 at a CAGR of 7.1%.
9.11.6 Industrial Gloves

Industrial hand gloves are used as protective apparel for workers in factories. They are of two types, Cut-
Slash Protection gloves and Thermal Protection gloves. Gloves offer protection against rough objects, sparks,
heat, blows that are caused due to heavy-duty work. Hand gloves can be Nitrile gloves for dry grip, PVC
impregnated textile gloves for dry, oily and wet grip, leather gloves with Kevlar and p-aramid layer for intense
use in high heat or sharp edges environment. Industrial gloves are made of three base fabrics, cotton, nylon
or polyester. The fabric is chosen according to the condition of use. The coating of either Nitrile or PVC is
impregnated as required. Some of the gloves are meant for intense industrial use and these may have
additional layer of special fabrics like Kevlar, Nomex, spectra or p-aramid to provide better temperature
resistance, fire resistance and cut resistance.
Main manufacturers of industrial gloves in India are Mallcom India Ltd., Rajda Industries & Exports Pvt. Ltd.
and Lumen India (Kolkata).
The global market for technical textiles component of Industrial Gloves is estimated at US$ 993 Million in
2019-20 and is expected to grow at a CAGR of 6% to US$ 1,328.95 Million by 2024-25. The corresponding
value of Indian market is estimated Rs. 303.30 Crores in 2019-20. It is expected to grow to Rs. 430.11 Crores
by the year 2024-25 at a CAGR of 7.5%.
9.11.7 Nuclear & Biological Protective Clothing

The threat posed by nuclear (radioactive fallout dust) and chemical warfare weapons can be countered by
suits which are known as NBC (Nuclear Biological and Chemical) suits. The suits are designed to be worn for
extended periods while continuing to operate in a hostile environment. The Nuclear Biological and Chemical
protection suit comprises a trouser and jacket which are both made from permeable and breathable fabric.
In 2019-20, the Indian market for NBC (TT) was estimated to be worth Rs. 23.40 Crores as compared to the
global market which was worth US$ 152 Million during 2019-20. The Indian market is expected to grow at a
CAGR of 7.4% to reach Rs. 33.18 Crores by 2024-25 and the global market is estimated to increase to US$
184.60 Million by 2024-25 at a CAGR of 3.9%.
9.11.8 Chemical Protective clothing

Chemical Protective Clothing (CPC) is used for protection against effect of exposure to toxic chemicals through
inhalation or physical contact. The CPC suits are of two types, durable CPC is made from non-permeable
textile fabrics (PVC/Rubber coated fabrics). However, because these fabrics do not permit air or moisture
permeability, these lead to discomfort and loss of productivity. The disposable CPC is made of non woven
fabric and can be repeatedly used for 3-4 times. The disposable CPC allows better air and moisture
permeability and are breathable. It is for this reason that these are preferred over non-permeable type. The
carbon-containing material developed so far includes carbon-coated non-woven fabric, carbon-impregnated
polyurethane foam, hard carbon microsphere-adhered woven fabric and activated charcoal cloth. Overallas
made from non-woven fabrics are also becoming popular in various industries. The CPC clothing also includes
________________________________________________________________________________________________

___________________________________________________________________________________________________
gas masks, hoods etc. to prevent against airborne toxic agents. The main manufacturer of Chemical protective
clothing (CPC) in India are Sai Synergy LLP, Intech Safety Pvt. Ltd. and Venus Safety Equipments Ltd.
The annual consumption of technical textiles for Chemical Protective Clothing in India was estimated at Rs.
43.20 Crores in 2019-20, expected to grow at a CAGR of 7.5% to reach Rs. 61.26 Crores by 2024-25. The
consumption at the global level for the same period is assessed to grow at 6% per annum from US$ 137
Million in 2019-20 to US$ 183.35 Million in 2024-25.
9.11.9 Others (including Outer Protective Clothing)

Outer protective clothing includes products like wind cheaters and rain coats which provide protection to the
individuals from extreme weather, wind and water (rain) to keep the person comfortable and dry. The
common products are rain jackets, wind cheaters (Breathable water proof rain coats, Breathable water
resistant jackets commonly called wind cheaters, as the lamination of the fabric prevents strong winds to pass
through the fabric) and Hybrid soft shell jackets. These products are mainly being made by small and medium
enterprises in India.
The market size for technical textile requirement in outer protective clothing in India was Rs. 418.50 Crores
in 2019-20, expected to grow at a CAGR of 4.2% to reach Rs. 513.14 Crores by 2024-25. The world market
in the same period is assessed to grow at 3.9% per annum from US$ 655 Million in 2019-20 to US$ 795.49
Million in 2024-25.
9.12 Sportech
Sports technical textiles or Sportech is the use of technical textiles for sports purposes. This includes all types
of fabrics related to clothing as well as equipment.
Technical textile products under Sportech are as follows:
1. Artificial Turf
2. High performance swimwear and sportswear
3. Parachute Fabric
4. Sleeping Bags
5. Sports Composites (TT Component)
6. Sports Footwear Components
7. Tents
8. Ballooning Fabric
9. Sports Nets
10. Sports Strings
________________________________________________________________________________________________

___________________________________________________________________________________________________
Figure 9.31: Percentage contribution of Sportech products in the domestic market (2019-20)
Sports footwear
components,
75.75%
Sports nets,
1.47%
Sleeping bags,
1.09%
Ballooning fabrics,
0.03%
Tents,
Parachute fabrics, 4.8%
3.07% Sports composites
(TT component), High performance sportswear
Artificial turf, 11.14% and swimwear,
1.45%
Others, Sports strings, 0.05%
0.2% 0.95%
The domestic Sportech market is dominated by the Sports Footwear Components category which make up for
more than three-fourths of the segment’s share of market. Technical textiles elements in Sports Composites
constitute the next large share of the market.
Figure 9.32: Percentage contribution of Sportech products in the international market (2019-20)
________________________________________________________________________________________________

___________________________________________________________________________________________________
Sleeping bags,
1.17% Sports footwear
components,
Parachute fabrics, 51.39%
2.13%
Artificial turf,
14.84%
Tents,
Sports composites 7.98%
(TT component),
14.49%
Sports High performance
nets, Ballooning sportswear and
Others, Sports strings, 2.26% fabrics, swimwear,
0.20% 1.47% 0.12% 3.93%
Similar to the domestic market, Sports Footwear Components dominate the international Sportech market as
well, amounting to over half the market share of the entire segment. Artificial turf and Sports Composites
(both having a share of nearly 15% each) also represent large slices of global Sportech market.
Figure 9.33: Production Vs Consumption of Sportech segment in the domestic market (Rs. Crores)
10,312
9,653 9,670
9,021 9,123
8,606
8,119 8,431
7,660 7,879
7,226 7,364
2019-20 2020-21 2021-22 (E) 2022-23 (E) 2023-24 (E) 2024-25 (E)
The value of domestic production of Sportech items in 2019-20 is estimated at Rs. 7,226 Crores which is a
little lower than the value of domestic consumption. However, the deficit is likely to increase in the coming
years due to increase in popularity of sports and games among the youth.
________________________________________________________________________________________________

___________________________________________________________________________________________________
Table 9.13: Sportech - World and India Market Size 2019-20

Product Name World (US$ Million) India (Rs. Crores) Share of India
Artificial Turf 3,624 107 0.45%
High performance swimwear and sportswear 959 4 0.06%
Parachute Fabric 520 226 6.67%
Sleeping Bags 285 80 4.31%
Sports Composites (TT Component) 3,539 820 3.56%
Sports Footwear Components 12,548 5,578 6.83%
Tents 1,949 354 2.79%
Ballooning Fabric 30 2 1.02%
Sports Nets 553 108 3.00%
Sports Strings 359 70 2.99%
Others 50 15 4.61%
Total 24,416 7,364 4.63%
9.12.1 Artificial Turf

Artificial turf is a synthetic fibre surface that is used as a substitute for natural grass. The technology has
evolved over time and the latest generation of artificial grass is mainly made from three different types of
plastic: polypropylene, polyethylene (most widely used) and nylon (polyamide) (most durable). Turf can be
used to replicate a lawn in any setting but is most widely used in arenas where sports are played on grass
(such as football, lawn tennis etc).
The artificial turf structure consists of different layers; the pile fibres, backing cloth, shock absorbing layer and
the supporting base.
The advantage this product has over natural grass is that it requires little maintenance, less frequent
watering, and less exposure to sunlight. The international world market is dominated by Germany due to high
levels of customer awareness about the benefits of replacing natural grass with artificial turf, however it is the
Asia-Pacific region where the market is expected to grow at the fastest rate in the coming years both in terms
of volume and value. The major global players are Sport Group, Tarkett Group, Tencate Grass and SiS Pitches.
The entire market of artificial turf in India is catered via imports. There are no manufacturers of artificial turf
in India.
The global market for artificial turf was US$ 3,624 Million whereas the Indian market stood at Rs. 107 Crores
in 2019-20. The global market is expected to grow at a CAGR of 8% and is expected to touch US$ 5,324.85
Million in 2024-25, whereas the Indian market is expected to grow at a CAGR of 17% to log in annual sales of
Rs. 234.59 Crores.
9.12.2 High Performance Sportswear and Swimwear

High performance sportswear and swimwear is a category of specialised clothing worn by athletes to boost
their performance while playing sports or engaging in fitness activities by maximising movement of the body
and minimising resistance provided by the clothing. The material used is often breathable, quick drying,
________________________________________________________________________________________________

___________________________________________________________________________________________________
thermal and chemical resistant. Different types of high-performance sportswear include ready to wear; fashion
outer, pants and t-shirt; rash guard, wet suit and swimwear and shoes (sports shoes, aqua shoes and aqua
socks). Different fabrics used to make these are polyester, nylon, neoprene, polypropylene, spandex, cotton,
and others (rayon and lyocell).
North America dominates the global market and is seeing a rising trend of athleisure wear. This is followed by
Europe which is seeing a high demand for fashionable activewear. In India, so far, the sportswear industry
seems to be emerging as an extension of mainstream apparel industry instead of a separate entity. Breathable
fabrics, water-repellent, soil-proof clothing, body temperature control, and quick-dry clothing are all being
introduced into the Indian apparel market for daily wear. Nike, Puma, Adidas, and Lululemon are the top
global brands. Page industries Ltd. is a key player in India and has dealerships for Speedo, Adidas India Ltd.
and Reebok India Ltd. India imports specialised, high performance sportswear.
In 2019-20, the Indian market for high performance sportswear and swimwear was worth Rs. 4 Crores and the
global market was worth US$ 959 Million. The Indian market is expected to grow at a slow pace of 5% per
annum due to affordability issues over the next five years and reach sales of Rs. 5.11 Crores in 2024-25. The
global market is likely to grow at 7% per annum and expected to have a market size of US$ 1,345.05 Million.
9.12.3 Parachute Fabrics

A parachute is meant to slow the movement of a
person or object as it falls or moves through the
air by creating a drag. They can be of two types
as according to the pattern: a dome canopy and
rectangular parafoil. These are generally used for
tourism, sports and military purposes. Parachutes
are often made up of lightweight and strong cloth
like silk, canvas or nylon. Kevlar and terylene are
two new types of technical textile fabrics which
are being increasingly used for making
parachutes, as these fabrics are heat resistant
and very strong. North America accounted for the
major share of the parachute fabric market,
followed by Europe and Asia Pacific.
Key manufacturers of parachute fabrics in India

are Kusumgar Corporates and Entremonde
Polycoaters. Parachute Systems, Airborne
Systems, Ruby Mills Ltd., Shahlon Group and FXC
Corporation are leading companies at global level.
The market size for parachute fabrics in India is worth Rs. 226 Crores in 2019-20 and is likely to grow at a
CAGR of 14% to reach Rs. 435.14 Crores by 2024-25. The corresponding figure for the world market for
parachute fabrics is estimated at US$ 520 Million and is expected to grow at a CAGR of 5% and reach US$
663.67 Million by the year 2024-25.
________________________________________________________________________________________________

___________________________________________________________________________________________________
9.12.4 Sleeping Bags

Sleeping bags are blanket-like bags that allow individuals to sleep inside them. They are a great substitute for
a bed wherever and whenever the latter is not available especially when doing camping, trekking,
mountaineering, nature exploration, adventure travel etc. Sleeping bags also provide protection against harsh
weather when used in an outdoor setting. Sleeping bags can be categorised based either on shape as square
sleeping bags, mummy sleeping bags and sleeping pods or based on the fill used to make them: down fill and
synthetic fill. Manufacturers based in North America and Europe are leading players in this market. This can be
attributed to many professional rock climbers, mountaineers and adventure enthusiasts. A large number of
online advertisements, especially on social media also influence the market towards greater consumption. As
teenagers and young adults increasingly prefer adventure activities, it is expected to drive up the demand for
sleeping bags in the Asia Pacific region in the next few years.
K C International, Standard Newar Mills, Tirupati Texco Pvt. Ltd., Naveen Textile Agencies and Industrial
Enterprisers are the major Indian players. Jarden, Vaude, Johnson Outdoors, Oase Outdoors, Big Agnes, V F
Corp., Snugpak, AMG Group, Jack Wolfskin, Columbia Sportswear, Exxel Outdoors and Gelert are major
competitors in the global sleeping bags market.
In 2019-20, India’s market size for technical textile component in Sleeping Bags was estimated at Rs. 80
Crores and expected to grow at a CAGR of 12% to touch annual sales of Rs. 140.99 Crores. The size of the
world market for TT elements of sleeping bags is US$ 285 Million and it is likely to grow at a CAGR of 5% and
expected to reach a market size of US$ 363.74 Million in 2024-25.
9.12.5 Sports Composites (TT Component)

The use of Sports composites in India is mainly in boxing equipment, inflatable balls and protective equipment
for cricket. The items included as Boxing equipment are Boxing Gloves, Punching Gloves, Head Guards,
Punching Pads, Abdominal Guard, Speed Ball, Punching Bag etc. Inflatable balls consist of football, volleyball,
basketball, handball etc. Footballs account for 50% of the market of inflatable balls. Protective equipment for
cricket has a range that includes leg-guards, batting gloves, wicket keeping gloves, thigh pads, helmets, caps
& hats, cricket kit bags etc. It also includes sports helmets, in which the use of cricket helmet in India
predominates.
The market size for the technical textile elements of sports composites at the world level is US$ 3,539 Million
in 2019-20, which is expected to grow at 8% to increase value of annual consumption to US$ 5,199.95 Million.
The Indian market for sports composites is estimated to be worth Rs. 820 Crores in 2019-20. It is estimated
to grow at a CAGR of 11% to be able to expand to Rs. 1,382 Crores by 2024-25.
9.12.6 Sports Footwear Components

Shoe lining and Shoe upper fabrics are the major Sports footwear components. These components keep the
shoes well-ventilated and moisture-free which provides comfort to the feet of the individual wearing the
shoes. The technical textile component used in sports shoes is PU/PVC coated/laminated fabrics that are used
in shoe uppers, linings on the counters and below the shoe uppers, non-woven insoles, laces, tapes, labels,
elastics, sandwiched meshes etc. The shoe uppers and linings account for 90-95 % of the technical textile
components used.
________________________________________________________________________________________________

___________________________________________________________________________________________________
The production of technical textile component of sports shoes is mainly done by small units in unorganised
sector of India. There are a few large players like Action shoes, Bata and Liberty which manufacture their own
footwear components.
The global market size for the technical textile elements of sports footwear is US$ 12,548 Million in 2019-20,
which is expected to grow at 3% to increase value of annual consumption to US$ 14,546.57 Million. The
Indian market for technical textile elements of sports footwear is estimated to be worth Rs. 5,578 Crores in
2019-20. It is estimated to grow at a CAGR of 5% to be able to expand to Rs. 7,119.10 Crores by 2024-25.
9.12.7 Tents
Tents are portable shelters made of cloth or other cloth-like materials and are supported by poles. Tents are
stretched tight by chords or loops attached to pegs that have been inserted into the ground. There are three
main types of tents; arctic tents are designed to protect against the cold and wind, extendable tents are tents
that are larger and can accommodate up to four people and swiss cottage tents which are luxury tents and
much bigger than the other two.
Europe is the largest market for tents, and it is expected to further expand in the next five years because of
rapid growth in outdoor adventure tourism and camping. The Asia Pacific region is expected to grow at the
fastest rate. A V Enterprise, Standard Newar Mills, Tirupati Texco Pvt. Ltd. and K C International are major
players of the Indian tent industry. At the global level, AMG Group, Hilleberg, Johnson Outdoors, The North
Face, Newell Brands, Oase Outdoors, Simex Outdoor International, The Coleman Company, Big Agnes, Exxel
Outdoors and Kampa are the major producers of tents. In India, more than 80% of the tenting fabric
manufacturers operate in and around Kanpur, most of them being small and medium-sized enterprises (SMEs)
or micro, small and medium sized (MSMEs).
The global market for tent fabrics is US$ 1,949 Million in 2019-20, which is expected to grow at 5% to
US$ 2,487.47 Million. The Indian market for tent fabrics is worth Rs. 354 Crores. It is estimated to grow at a
CAGR of 11% to be able to expand to Rs. 596.51 Crores by 2024-25.
9.12.8 Ballooning Fabrics

Hot air balloons are nonporous envelopes of thin material filled with a lifting gas that is capable of lifting a
suspended payload into the atmosphere. They consist of two main parts, the envelope (or gas bag) and the
basket. These are generally made up of urethane-coated nylon, polyethylene or polyester. These balloons
were used in wars earlier, but nowadays these are generally used for military, scientific and recreational
purposes. Major types of balloons are meteorological balloon, zero pressure balloon, super pressure balloon (a
constant level balloon), military tethered balloon and powered balloon.
There are two major manufacturers of ballooning fabric in India - Bandhu Aerospace Pvt. Ltd. and Unique
Inflatables. Some of the global players are Cameron Balloons, Aerosaurus Balloons Ltd., Firefly Balloons,
Lindstrand Technologies Ltd., Kubicek Balloons and Ultramagic Balloons.
The Indian market for ballooning fabrics was Rs. 2 Crores in 2019-20 and is expected to have growth of 2%
CAGR to Rs. 2.21 Crores by 2024-25 in the immediate future. The world market for ballooning fabrics is
estimated at US$ 30 Million in 2019-20 and it is likely to grow at 3% for the next five years to US$ 34.78
Million in 2024-25.
________________________________________________________________________________________________

___________________________________________________________________________________________________
9.12.9 Sports Nets

Sports nets are used in various sports viz. Badminton, Football, Basketball, Volleyball, Tennis, Table Tennis,
Handball etc. Cricket practice nets are also used widely. The nets are bought and used by educational
institutions, sports clubs, regional centres of Sports Authority of India for use in various tournaments, sports
institutes and hostels. Most of the sports nets being manufactured in India are being exported. Main
manufacturers of sport-nets in India are Garware Technical Fibres Ltd. and Kwality Nets Manufacturing
Company Ltd.
The global market for sports nets was US$ 553 Million whereas the Indian market stood at Rs. 108 Crores in
2019-20. The global market is expected to grow at a CAGR of 6% and is expected to touch US$ 740.04 Million
in 2024-25, whereas the Indian market is expected to grow at a CAGR of 20% to log in annual sales of Rs.
268.74 Crores in 2024-25.
9.12.10 Sports Strings

Sports strings are made from nylon and polyester and are used for stringing of badminton, lawn tennis and
squash racquets. The textile based sports strings comprise over 95% of sports strings usage natural gut
strings make up a small share. The sports strings are of six types: Monofilament strings, Multifilament strings,
Solid core with single wrap, Single core double winding, Multi-core with wraps and Natural Gut strings.
China, Japan and Taiwan are the main countries where manufacturing of sports strings takes place at a large
scale. Imported strings comprise 90% of the sports strings consumed in India. There are very few Indian
manufacturers and those too are of small to moderate size. Some of the prominent enterprises in this industry
are Sunrise Sports India Pvt. Ltd., the distributor for Yonex brand of sports racquets and Sportiff India Pvt.
Ltd. which is the distributor for Babolat tennis racquets and strings in India.
The market size for the textile based sports strings at the world level is estimated to be worth US$ 359 Million
in 2019-20, which is expected to grow at 6% per annum to US$ 480.42 Million. The estimated value of Indian
market for sports strings is Rs. 70 Crores in 2019-20. It is expected to grow at a CAGR of 10% to be able to
expand to Rs. 112.74 Crores by 2024-25.
________________________________________________________________________________________________

10. Leading Countries in
Technical Textiles:
A Comparison
10.1 Identification of leading countries in technical textiles
Secondary research was conducted to identify countries where technical textiles industry is thriving. Various
parameters pertaining to technical textiles industry were compared across several nations. The final list of
countries is as follows:
1. China
2. United States of America (USA)
3. Germany
These countries have been termed as ‘leading countries’ for the purpose of the present study. A comparison
has been drawn between India and the leading countries across various metrics. The metrics which have
been documented include annual output, CAGR, exports, major product innovations, largest companies,
academic institutions, and, research and development institutes.
10.2 Output and CAGR of Technical Textiles

Table 10.1: Annual output and CAGR of Technical Textile in India and the leading
countries (2018)
S. No. Particulars China USA Germany India World
1 Total annual output of TT (Kilo 5211.5 6692.7 2622.4 2887.4 38112.9

tons)
2 Total value of annual output of TT 57.7 47.8 13.3 13.4 192.57
($ Billion)
3 Share of value of global annual 30% 24.8% 6.9% 7% -
output
4 CAGR of TT 5.6% 3.5% 4.1% 7% 4.3%
In terms of volume and output, China had the largest share in the annual output during 2018. USA also
has a large share in terms of volume and output. While India is expected to grow at a CAGR of 7 percent
which is the highest among the countries under study, China too is expected to grow at a fast pace with a
CAGR of 5.6 percent.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
10.3 Exports of Technical Textiles

Table 10.2: Exports of Technical Textiles by leading countries and India (2019)
S. Particulars China USA Germany India World
No.
1 Total value of exports of TT 27.30 8.60 9.00 1.98 107.10
($ Billion)
2 Percentage share of value of 25.5% 8% 8.4% 1.85% 100%
exports
In terms of exports of technical textiles products, China occupies the first position in the world, exporting
products worth $ 27.3 Billion. Indian exports have a very small share (1.85 percent) of the world exports,
indicating a high potential for growth.
10.4 Technical textiles: Its share and major products

Table 10.3: Share of technical textiles in textiles and its major products (2019)
S. Particulars China USA Germany India World
No.
1 Value of technical 20% 42% N.A. 13% 27%
textile output as a
percentage of value
of total textile
output
2 Major Plastic coated Yarns, Tyre cord fabric, Geosynthetics, -
products/innovations fabrics, Bags, Nonwovens, Coated or Tarpaulins,
in the field of Fibreglass Protective impregnated Fire Retardant
technical textiles apparel textiles, Textile Clothing
wicks, conveyor
belts or belting
Technical textiles accounted for 27 percent of the total textile industry of the world in 2019. USA has the
highest share of value of technical textiles as a percentage of value of total textiles. The technical textile
industry in India is still at a nascent stage as compared to the high potential that exists in India.
10.5 Large enterprises producing technical textiles

Table 10.4: Large enterprises producing technical textiles in each country
S. Particulars China USA Germany India

No.
1 Three large 1. Jiangsu Hengli 1. Berry Global Inc. 1. KAP AG 1. SRF Limited
enterprises Group Co. Ltd. 2. Dupont De 2. UTT Technische 2. Kusumgar
that produce 2. Shangtex Holding Nemours Inc. Textilien GmbH & Corporates Private
technical Co. Ltd. 3. GSE Co. KG Limited
textiles 3. Lu Thai Textile Environmental LLC 3. Setex-Textil- 3. Garware Technical
Co. Ltd. GmbH Fibres Limited
The table presented above mentions the names of a few large firms in technical textiles industry of respective
countries.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
10.6 Premier academic institutions for technical textiles

Table 10.5: Premier academic institution(s) for education in technical textiles in India
and in leading countries
S. Particulars China USA Germany India
No.
1 Premier academic 1. Donghua 1. NC State 1. RWTH 1. Indian Institute of
institution(s) for University University Aachen Technology, Delhi
Technical Textiles 2. Wuhan Textile 2. Auburn University 2. Institute of
University University 2. Dresden Chemical Technology,
3. Zhejiang 3. Clemson University of Mumbai
University University Technology 3. Dr B R Ambedkar
3. University of National Institute of
Stuttgart Technology, Jalandhar
The three premier institutions at national level that impart education in technical textiles in each of the
leading countries and in India have been mentioned in the table shown above.
10.7 Prominent R&D facilities/institutions for technical textiles

Table 10.6: Prominent R&D facilities/institutions for technical textiles in India and in leading
countries
S. No. Particulars China USA Germany India
1 Prominent R&D 1. Teijin Product 1. Advanced Functional 1. Deutsche 1. Northern India

facility/institution Development Fabrics of America Institute für Textil- Textile Research
for Technical China Co., Ltd. Institute (AFFOA) und Faserforschung Association,
Textiles 2. China 2. Erez Thermoplastic Denkendorf (DITF) Ghaziabad
Chemical Fibres Products Agriculture 2. DWI – Leibniz- 2. South India Textile
Association Cooperative Association Institut für Research Association,
3. Advanced Ltd. Interaktive Coimbatore
Textile 3. Textiles and Materialien 3. Ahmedabad Textile
Innovation Nonwovens 3. Hochschule Industry's Research
Center (ATIC) Development Center, Niederrhein Association,
University of Tennessee Ahmedabad
10.8 Major initiatives taken by Governments of leading countries for

supporting technical textiles industry
10.8.1 China
1. Currently, a significantly large part of annual production of technical textiles in China is being sold within
the country. The Government is giving high priority to augmenting exports and making large investments
to facilitate acceleration of R&D activities in the technical textiles industry so as to make Chinese industry
more competitive at a global level.
2. The Chinese government is placing a strong emphasis on especially increasing exports of fabrics that are
used in production of medical textiles and products.
3. The Chinese government is supporting manufacturers targeting some of the emerging countries in Africa,
particularly Zambia and Tanzania.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
10.8.2 USA
1. In 2016, Advanced Functional Fabrics of America (AFFOA) was selected by the federal government to
serve as the Revolutionary Fibers and Textiles Manufacturing Innovation Institute. It received more than
US $75 million in government funding and nearly US $250 million in private investments to support US-
based, high-volume production of new technologies. Since then, AFFOA has helped facilitate pilot
production of sophisticated textiles and fabrics so companies can engage consumers with small batches of
advanced fabric products, or prototypes, in a manner similar to how software companies roll out
minimally viable products to quickly gather feedback from customers and consumers.
2. US trade policy in technical textiles is moving more towards bilateral rather than multilateral agreements
which tend to allow more focus on protecting domestic sourcing.
10.8.3 Germany
1. A project of the future, ‘Perspectives 2025’, was presented to an international professional audience for
the first time at a press conference of TECHTEXTIL 2019. It outlined the challenges for technical textiles
in terms of 10 areas of growth. Over the following one year, workshops and seminars were organised in
which more than 80 scientists, business people and students participated. This resulted in an evaluation
of over 250 ideas and potential solutions for the use of technical textiles.
10.8.4 India
1. Under Union Budget 2020-21, a National Technical Textiles Mission was proposed for a period from 2020-
21 to 2023-24 at an estimated outlay of Rs. 1,480 Crores. In the same budget, the Government of India
allocated around Rs. 3,515 Crores to the Ministry of Textiles and Rs. 80 Crores for the Integrated Textile
Parks scheme.
2. The Government has launched production linked incentive scheme to provide incentives for manufacture
and exports of specific textile products made from man-made fibre. Under this scheme, the government
has approved Rs. 10,683 Crores for manufacture of manmade fibres and technical textiles.
10.9 Data sources

• Grand View Research (GVR) Industry Analysis, Technical Textiles Market, 2020
• Allied Market Research Report, Technical Textiles Market, 2020
• ATI, Top 10 Textile Companies in China, 2018
• IBIS World, Technical Textiles Manufacturing in Germany, Industry Trends 2015-2020
• Invest India, Technical Textiles: The Future of Textiles, 2019
• Textilegence, Global Technical Textiles Market, 2020
• The Textile Magazine, ‘China and India to Remain lucrative markets for Technical Textiles Globally’, 2015
• Massachusetts Institute of Technology (MIT) – Fabrics poised to become new software, 2019
_______________________________________________________________________________________________

11. Future demand and
trade expectations in
Technical Textiles
11.1 Introduction to supply sources and demand
destinations for technical textiles
Technical textiles is rapidly emerging as an industry which is revealing new applications and opportunities
driven by technology-led innovations. Countries and enterprises that are investing in developing new
technologies, fostering innovation, encouraging entrepreneurship and upgrading their system of teaching and
training human resources have taken a lead over others in establishing themselves as major sources of supply
of technical textiles machines and products. The experience so far suggests that such countries and
enterprises also form collaborations and leverage networks to share knowledge and introduce innovations.
Entities that are significant sources of supply, are also main consumers of technical textiles.
China, USA and Germany, are not only leading countries for production and exports of technical textile but
also are its three leading consumers. These three countries put together account for more than 60 percent
of the value of global annual output of technical textiles. China is the largest producer, accounting for nearly
one-third of global production; USA accounts for one-fourth of the global production. These two countries
also happen to be the two largest consumers of technical textiles. The exports from Chinese technical textile
industry comprise a significant part of international trade in all segments of technical textiles. The value and
share of world exports of different countries is presented in the following table:
Table 11.1: Exports of Technical Textiles by leading countries and India (2019)
S. No. Particulars China USA Germany India World
1 Total value of exports of TT 27.30 8.60 9.00 1.98 107.10

(US $ Billion)
2 Percentage share of value of 25.5% 8% 8.4% 1.85% 100%
exports
________________________________________________________________________________________________

Section 11: Future Demand and Trade Expectations in Technical Textiles
___________________________________________________________________________________________________
11.2 Demand and trade characteristics of Indian

technical textiles
India’s annual rate of growth of technical textile industry is around 7 percent – faster than China’s nearly 6
percent annual growth in the technical textiles industry. In terms of exports of technical textiles products,
China occupies the first position in the world, exporting products worth US $ 27.3 Billion that make up for over
25 percent of world exports. Indian exports have a small share (1.85 percent) of the world exports market.
This indicates a high potential for growth of India’s exports. This magnitude of gap is partly explained by the
share of technical textiles output as a percentage of country’s textile industry’s output in value terms. The
value of annual output of technical textiles accounted for 27 percent of the output of total global textile
industry in 2019. The value of output of technical textile industry comprises nearly 20 percent of the output of
the textile industry as a whole in China whereas in India, the corresponding figure is between 10-15 percent
according to different estimates.
A study of the data of India’s trade in technical textiles (as specified through 449 ITC HS codes that IIT Delhi
is suggesting for adoption) over the last eight years from 2012-13 to 2019-20 reveals that exports have grown
for ten out of eleven segments in the eight-year period from 2012-13 to 2019-20. Exports have grown at a
CAGR of around 7% and the trade surplus in technical textiles has increased from Rs. 15,210 Crores in 2012-
13 to Rs. 20,644 Crores in 2019-20.
India’s technical textiles exports are mainly to USA, Germany and UK with India’s exports to USA comprising
nearly one-fourth of India’s technical textile exports. There has been a continuous increase in exports to USA
over last few years. India’s imports of technical textiles are mainly from China. South Korea and Germany are
also significant supply sources, catering to India’s demand for technical textiles. Eight Technical Textiles
segments – Packtech, Clothtech, Hometech, Mobiltech, Protech, Agrotech, Sportech, and Buildtech have
witnessed trade surplus during 2019-20. Indutech, Meditech, and Geotech segments have witnessed deficit
during 2019-20. The overall rate of growth in imports is higher than that in exports. This makes it imperative
to take steps to boost technical textile exports and create avenues for higher domestic production to achieve
import substitution and move towards an Atmanirbhar Bharat (Self-reliant India).
11.3 Segment-wise features of demand and

trade of technical textiles in India
1. Agrotech
Agrotech has experienced a decline in exports in the last 8 years (2012-13 to 2019-20) and comprised 0.7-
1.8 percent of India’s technical textiles exports. The annual exports have seen a decline in the past eight
years from Rs. 791 Crores to Rs. 665 Crores. The local consumption has been growing with increasing
modernisation of agriculture in the last few years. Main products which are exported from India are fishing
nets and shade nets and these have grown in exports in the last few years. India is able to meet its
_______________________________________________________________________________________________

___________________________________________________________________________________________________
domestic demand without imports and the future outlook suggests that there is a good possibility of
increasing exports of other items like mulch mats and crop covers too.
Major item of India’s Agrotech exports is Made Up Fishing Nets - other than Nylon (ITC HS Code 56081190).
It has the largest share with 38% of the value of exports of this segment in 2019-20. It also has had the
highest export value over the last four years. Made Up Fishing Nets and woven fabrics have had a total export
share of more than 60% in each of the past eight years. Fishing net manufacturing industries in India are
mostly in the MSME sector. With comparatively low wages, our labour-intensive fishing net industry can be
developed to overtake those in China, Thailand, Indonesia, etc., in the world market. This is besides feeding
our domestic market which is equally significant. There was evidence of dumping of fishing nets in India by
Chinese and Bangladeshi exporters after which Anti Dumping Duty (ADD) has been imposed to bring the
artificially deflated prices of imported fish nets at par with that of domestic fish nets.
2. Buildtech
Exports of those Buildtech products which are covered by suggested ITC HS Codes have been rising at
relatively faster rates (higher than CAGR of 10%) compared to other segments of technical textiles. The
annual exports have seen a growth from Rs. 105 Crores to Rs. 367 Crores at a CAGR of 19% in the last eight
years. In the same period, imports have grown from Rs. 102 Crores to Rs. 224 Crores, at a CAGR of 12%.
Due to higher growth in exports than imports, the trade surplus has increased from Rs. 4 Crores in 2012-13 to
Rs. 142 Crores in 2019-20. The contribution of exports of Buildtech to the overall exports of technical textiles
during the eight-year study period rose from 0.2% to 0.8% and products share in imports increased from
0.3% to 0.4%.
Wallpaper and similar wall coverings (ITC HS Code 48142000) have largest export value in 2019-20 with a
share of 68% in Buildtech exports. It is followed by trade advertising material, commercial catalogues, (ITC
HS Code 49111090) at 23%. UAE is the largest importer of Indian Buildtech products in 2019-20 with a 44%
share in India’s Buildtech exports. Its share has increased from approximately 4% in 2012-13 to more than
40% in recent years.
Despite experiencing rapid growth in construction activity, India continues to be largely self-sufficient in terms
of Buildtech products and is at present a marginal player in global trade. This situation is unlikely to change
and despite the demand for Buildtech products increasing due to continually increasing construction activity,
the requirements for buildtech products will continue to be met by domestic supplies. Exports from this
category is unlikely to be significant in the coming years.
3. Clothtech
Clothtech exports for items (covered under ITC HS Codes as suggested by IIT Delhi) have grown from Rs.
6,380 Crores to Rs. 9,340 Crores at a CAGR of 6% and imports have grown from Rs. 1,778 Crores to Rs.
2,491 Crores, at a CAGR of 5% during the period 2012-13 to 2019-20. Over the last eight years, India has
reported trade surplus in Clothtech for each year. Due to higher growth in exports than imports, the surplus
has increased over the last eight years from Rs. 4,602 Crores in 2012-13 to Rs. 6,849 Crores in 2019-20.
Between 2013 and 2020, the year-to-year contribution of exports of Clothtech segment to overall exports of
_______________________________________________________________________________________________

___________________________________________________________________________________________________
technical textiles ranged from 13% to 14% and for imports, the contribution of Clothtech to total imports was
between 4% and 6%.
Synthetic Filament Yarn (54023300) with a share of 54% has the largest contribution to exports of Clothtech
for the year 2019-20. Turkey is the largest importer of Indian Clothtech goods in 2019-20. The share of
Turkey has been around 14-15% during this period. Bangladesh, Brazil, USA, and UAE are the other countries
where India exports its Clothtech products significantly.
India is a significant exporter of industrial and sewing threads made of natural and synthetic yarn. There is
huge potential for increasing exports in this area because of world class large facilities created in India for
yarns and threads. However, India has to rely on imports especially for meeting a part of its demand for
interlining, elastic tapes and zip fasteners. With increasing consumer prosperity and adoption of contemporary
trends in apparel, there is a likelihood of increasing demand for Clothtech products in India.
4. Hometech
Over the last eight years, India has reported a trade surplus in Hometech segment (as defined by the ITC HS
Codes suggested by IIT Delhi for inclusion in technical textiles) for all the years. India’s exports and imports
for 2019-20, for this segment were Rs. 9,497 Crores and Rs. 2,914 Crores respectively. Total exports have
seen a growth from Rs. 5,525 Crores to Rs. 9,497 Crores at a CAGR of 8% in the study period. During the
same period, imports have grown from Rs. 1,292 Crores to Rs. 2,914 Crores at a CAGR of 12%. Even as
imports are growing at a faster pace than exports, India has had a trade surplus for Hometech in each of the
eight years that are being considered.
Woven fabrics (ITC HS Code 54072090) and carpets have had the largest share of 13% in the exports for
2019-20. USA is the largest importer of Indian Hometech goods in 2019-20 with a share of 39% in terms of
value of India’s exports for this segment. Germany, China, Afghanistan, and UK are the other important
importers of Indian Hometech products.
India is largely self-sufficient with respect to meeting its domestic demand for Hometech products. After
meeting its domestic requirements, it is able to export coated fabrics, carpet backing cloth and Polyester
Staple Fibre (PSF). The scenario is unlikely to change in the coming years.
5. Mobiltech
Mobiltech is the technical textile segment with largest exports in value terms but the rise of India’s exports
in this segment is steady at a CAGR of 3.7% in the last 8 years. It formed 29% of India’s technical textiles
exports, down from 34% in 2012-13. The local consumption has grown at a brisk rate in the last few years
due to expansion of automobile market as well as increase in use of technical textiles as a replacement for
other materials in automobiles. The main products which are exported from India are airbags, tyre cords,
seat belts, seat covers, felts and carpets. These have grown in exports in the last 10 years. India is able to
meet most of its domestic demand without imports and the future outlook suggests that the situation is
going to remain the same.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
There has been a trade surplus for Mobiltech segment in all of the last eight years. During 2019-20, India’s
exports and imports for this segment were Rs. 21,095 Crores and Rs. 18,122 Crores respectively. Due to
higher growth in exports than imports, the annual surplus has increased over the last eight years from Rs.
1,779 Crores in 2012-13 to Rs. 2,973 Crores in 2019-20. Mobiltech is the largest segment in technical textile
industry of India in terms of both imports and exports, based on the 449 ITC HS codes considered for
analysis. In terms of countries, USA was the largest importer of Indian Mobiltech goods in 2019-20 with a
share of 22.7% in India’s Mobiltech exports.
6. Packtech
Packtech has been a major contributor towards India’s trade surplus as the trade surplus of Packtech has
consistently increased and has nearly doubled from Rs. 6,845 Crores in 2012-13 to Rs. 12,971 Crores in 2019-
20. Yearly exports have grown at a CAGR of 10%. Packtech segment has second largest value of exports in
2019-20 with a share of 24%. India’s Packtech exports and imports for the year 2019-20 were Rs. 17,185
Crores and Rs. 4,215 Crores respectively. The yearly percentage contribution of exports of Packtech products
to the overall exports of technical textile has ranged from 19.1% to 24% and that of imports from 6.3% to
8.2% over the eight-year period.
Sacks and Bags of Man-made textile material (ITC HS Codes 63053200) have largest share of 28% of
Packtech export value in 2019-20. This has also been the most exported product for the past eight years. USA
was the largest importer of Indian Packtech products in 2019-20 and exports to USA constituted 25.5% of
exports of Packtech products.
India is able to meet its domestic demand to a large extent through local production. Indian FIBC or Jumbo
Bags exports have been a major success in the exports markets. It is going to remain so in the coming years
with no apparent competition in sight.
7. Protech
Exports of Protech products have been rising at relatively faster rate (higher than CAGR of 10%) when
compared to most other segments. The imports for Protech items have also been increasing at relatively
faster rates as compared to those of many other segments. Yearly exports have grown from Rs. 382 Crores in
2021-13 to Rs. 882 Crores in 2019-20 at a CAGR of 13%. During the same period, imports have also grown
significantly from Rs. 97 Crores to Rs. 322 Crores at a CAGR of 19%. India has experienced trade surplus for
Protech segment for last eight years. The percentage share of yearly exports of Protech products to overall
exports of technical textile ranges from 0.8% to 1.2% and for imports, it ranges from 0.3% to 0.6%.
India imports most of the specialised hazard resistant /hazard proof fabric and garments such as life jackets,
bullet and blast proof jackets, fire resistant suits, chemical proof suits, etc., and exports winterproof clothing.
Protech forms a small part of india’s technical textile trade. As self-reliance is being emphasised by the
Government of India, there appear to be new opportunities opening up for enterprises who intend to take up
production of Protech products.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
8. Sportech
India’s annual exports for Sportech segment have risen from Rs. 698 Crores in 2012-13 to Rs. 861 Crores in
2019-20 at a CAGR of 3%. India has reported trade surplus for Sportech for all the years except in one year of
the eight-year period under study. India’s exports and imports in 2019-20 for this segment were Rs. 861
Crores and Rs. 445 Crores respectively. Due to higher absolute growth in exports than imports, the surplus
has increased from Rs. 338 Crores in 2012-13 to Rs. 416 Crores in 2019-20.
Sportech goods contribute only 1-2% to the overall exports of technical textiles industry in each year. USA is
the main destination for India’s Sportech exports. Australia, Germany, and South Africa are also among the
leading importers of Indian Sportech products. India is able to meet its domestic demand of most of the
Sportech items except for Artificial Turfs and Sports equipment such as raquets, hockey sticks, etc. made of
Sports composites. India also happens to be a large exporter of Sportech items such as protective pads, nets,
and balls. There is likely to be an increasing emphasis on import substitution and Indian firms are likely to
start producing Artificial turfs and composites-based sports equipment.
9. Indutech
India has had a trade deficit in Indutech segment in each of the years of the period under study. Although the
value of Indutech exports has seen a growth from Rs. 6,160 Crores to Rs. 9,924 Crores over the last eight
years at a CAGR of 7%, imports have grown from Rs. 9,188 Crores to Rs. 19,142 Crores, at a CAGR of 11% in
the same period. The trade deficit has increased over the last eight years from Rs. 3,028 Crores in 2012-13 to
Rs. 9,218 Crores in 2019-20. Indutech is the second largest segment in terms of India’s imports and exports
of technical textiles. The yearly share of exports of Indutech to the overall exports of technical textile industry
in the eight years ranged 13% to 14% and for imports it was 30% to 36%.
Synthetic Staple Fibres (ITC HS Code 55032000) has the largest share (21%) of the value of exports in 2019-
20. Printed circuits (ITC HS Code 85340000) had the largest import value among Indutech items in 2019-20
and had a share of 23% in India’s Indutech imports.
10. Meditech
India’s exports of Meditech products have been rising at relatively faster rates (higher than CAGR of 10%)
when compared to other segments. However, the imports of Meditech have risen at a faster rate than the
exports thus causing an increase in trade deficit from year-to-year. Value of annual exports has seen a growth
in last eight years from Rs. 868 Crores to Rs. 2,178 Crores at a CAGR of 14%. In the same period, yearly
imports have grown from Rs. 1,298 Crores to Rs. 3,090 Crores at a CAGR of 13%. The annual trade deficit
has increased over last eight years from Rs. 430 Crores in 2012-13 to Rs. 912 Crores in 2019-20. The
contribution of exports of Meditech products as a percentage of overall exports of technical textile has been
2% to 3% whereas the imports of Meditech comprise 4% to 6% of imports of technical textiles during the
eight year period. USA is the largest importer of Indian Meditech products.
In this segment, while India is importing a significant range and quantity of products such as artificial organs,
Extra Corporeal Devices, vascular grafts, artificial implants to meet its domestic demand is increasing at a fast
_______________________________________________________________________________________________

___________________________________________________________________________________________________
pace, India also exports, surgical dressings, disposables, PPE Kits, masks, diapers and sanitary napkins. The
usage of technical textiles for health, hygiene and surgical applications is going to increase in the coming
years. There is a huge opportunity for India to leverage its existing capabilities to play an important role in the
global market for Meditech products.
11. Geotech
Geotech segment has experienced a rapid growth in exports in the recent years and despite the prevailing
trade deficit, this segment appears to be filled with promise for India. Geotech exports were Rs. 67 Crores in
2012-13 but these have risen to Rs. 247 Crores in 2019-20 due to a CAGR of 20%. During the same period,
imports have grown from Rs. 213 Crores to Rs. 493 Crores at a CAGR of 13% and there has been a trade
deficit in each of the years of the eight-year period. The year-wise contribution of exports of Geotech to
overall exports of technical textiles during these eight years has ranged from 0.1% - 0.3% and for imports it
has been 0.7% - 1.1%.
Even though the current level of domestic demand as well as exports from India are at a low level, Geotech
segment has experienced a very rapid increase in its acceptance by domestic consumers as well as
entrepreneurs. In the years to come, Geotech will play a very important role in the domestic market as well as
India’s export basket.
_______________________________________________________________________________________________

12. Attractiveness of
Different States for
Technical Textile
Manufacturers
12.1 Need for comparing attractiveness of states
Technical Textiles is a fast emerging area of business that is characterised by rapid changes in all parts of its
value chain. This is leading to growth of several opportunities that business enterprises can take advantage of.
The industry also requires enterprises to be creative in making business and technology related decisions so
that they can maintain their competitiveness. One of the major decisions facing enterprises is that of choosing
the state(s) for locating their technical textiles manufacturing units. Different states of India vie with each
other to attract industrial investments and some of them have policy provisions that offer special incentives for
technical textiles units. It is important for the entrepreneurs/promoters to examine the policies of different
states and assess their suitability for the proposed enterprise (new or under expansion/diversification).
Carrying out such an assessment will help the entrepreneurs/promoters to determine the relative
‘attractiveness’ of the states in terms of estimating the overall costs (ease of doing business, concessions,
incentives, facilitating environment, benefits of reimbursements and subsidies) of doing technical textile
business and enable them to be more competitive in the technical textile market (domestic and international).
12.2 Method followed for comparing

attractiveness of states
Industrial and Business related policies of all the States and UTs were listed and then studied by the team of
researchers from IIT Delhi. Based on this study, 17 states were identified which, in the recent years, had
announced such policies having provisions related to textiles that could be of use to technical textile
enterprises. The 17 states so identified are listed as follows:
1. Andhra Pradesh 6. Karnataka 11. Punjab 16. Uttarakhand

2. Bihar 7. Kerala 12. Rajasthan 17. West Bengal
3. Gujarat 8. Madhya Pradesh 13. Tamilnadu
4. Haryana 9. Maharashtra 14. Telangana
5. Jharkhand 10. Odisha 15. Uttar Pradesh
_______________________________________________________________________________________________

Section 12: Attractiveness of Different States for Technical Textile Manufacturers
___________________________________________________________________________________________________
The relevant policies and packages of the states have been studied and their provisions have been classified
into certain ‘areas of importance’ for the enterprises. For brevity and ease of use, such areas of importance
are referred as ‘heads’ in the subsequent content in this section. The provisions of benefits and incentives that
each of the state policy is offering to the entrepreneurs have been categorised and recorded as per the
‘heads’. The state-wise policy provisions under different heads have been presented in the following tables:
Table 12.1: Comparison of support offered by States to textile/technical textile industry

(States covered: Andhra Pradesh, Bihar, Gujarat, Haryana and Jharkhand)
Heads Andhra Pradesh Bihar Gujarat Haryana Jharkhand
Main Revised Policy for The ‘Gujarat Textile Policy Haryana Textile Jharkhand Textile,
Operative Textiles and Industrial 2012-17’ which was Policy (2019) Apparel and
Policy Apparel (2018- Investment later extended with Footwear Policy
2023) Promotion its extended tenure (2016)
Policy ending in 2018.
(2016) Implemented
‘Scheme for
Assistance to
Strengthen Specific
Sectors in the Textile
Value Chain (2018-
23)
Land and 50 percent of land A jute park 25 percent of capital Financial 50 percent rebate
infrastructure cost or 5 percent involving expenditure. assistance of 50 on land cost that
support of project cost, an Maximum limit- Rs.15 percent of total will be paid over 5
whichever is investment Crores project cost with a years in 10 equal
lower. For outlay of maximum cap of instalments
standalone Rs. 42.36 Rs. 10 Crores to
Creation of textile
projects not Crores is establish
parks of more
allotted land in being infrastructure
than 75 acres in
industrial park, 25 setup at facilities
size to be
percent of Maranga,
supported by
external Purnea
Jharkhand
infrastructure cost
government
Capital Dependent upon 50 percent 20 percent of cost of To attract Anchor 20 percent of
subsidy the fixed capital of the machinery and unit, capital investments made
investment, approved equipment. Maximum subsidy @25 in fixed capital
subsidy is 10 project bill limit- Rs. 30 Lakhs. percent, with an upper cap
percent -20 with upper 50 percent of the fee maximum up to of Rs. 50 Crores
percent with limit being paid towards Energy Rs. 50 Crores,
upper cap of Rs. Rs. 20 audit/Water Audit 15 percent with a
15-50 Crores Crores subject to a maximum of Rs.
maximum of Rs. 1 25 Lakhs for
Lakh technical textile
projects
Capital subsidy @
15 percent of
Gross FCI for
textile machine
manufacturers
Interest 8 percent p.a. for 10 percent 6 percent for MSMEs Interest subsidy 7 percent p.a. or
subsidy 7 years with a return on and 4-6 percent for @ 3 percent per 50 percent of
moratorium of 2 interest Non-MSMEs annum for textile interest per
guarantees (depending on machine annum with Max.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
years or real employment manufacturers cap of Rs. 1 Crore

interest generated) for 7 years
Capped at 12.5%
rates on
per annum after Maximum limit- Rs.
term loans,
taking into 20 Crores p.a.
whichever
account assistance Maximum duration- 5
is lower.
from all sources. years
Power cost Power cost Rs. 3 (for LT power - 50 percent for 7
support reimbursement @ connection) and Rs. 2 year on power
Rs.2/- per unit for (for HT power tariff and 100
a period of 5 connection and non- percent exemption
years from the weaving activities). on Electricity duty
date of - Energy Audit. for 7 years
commencement of Maximum limit- Rs. 1
commercial Lakh separately for
production each audit
Technology Upto 50% - Up to 50 percent of 25 percent of cost Proposed creation
upgradation financial the investment for (with a cap of Rs. of incubation
related assistance for technology 15 Lakhs/product) centre
support investment in acquisition/upgradatio for new product
technology, n. Maximum limit- Rs. development
limited to Rs. 25 25 Lakhs for
Lakhs per operative period of
process/product scheme
Stamp duty Reimbursement of - Reimbursement of Reimbursement 100 percent
exemption 100% of stamp 100 percent of stamp @100 percent of exemption
duty and transfer duty paid on stamp duty paid
duty paid for purchase of land for units set up in
purchase/mortgag required for the new certain specified
es/lease/hypothec Park for developer of locations
ation of land park as well as for
meant for individual enterprise
industrial use setup in new park
Skill support One time grant of Lower of The state Financial Rs. 13000
50 percent of skill Government shall assistance of 25 one time (per
training cost with developme provide assistance for percent of worker) for
an upper limit of nt subsidy setting up a training investment in training/skill
Rs. 7500-10000 of Rs. institution of up to 85 machinery and development
per trainee 20,000 per percent of project equipment with a
employee cost subject to a cap maximum of Rs.
75 percent
or of Rs. 3 Crores 20 Lakhs for
financial
prevalent training purposes.
assistance for
Bihar Skill Reservation of 20
Project cost
Developme seats per quarter
(maximum Rs. 4
nt Mission for entrepreneurs
Crores) to training
(BSDM) from Haryana for
institutions for
rates skill training
setting up new
workshops at the
training facilities
Focus Incubation
in the state
Centre (additional
50 percent
sponsorship)
Quality - - - - 50 percent of the
development cost incurred on
and R&D BIS / ISO / SAS /
support LEED /
certification
subject to a limit
of Rs. 10 Lakhs
_______________________________________________________________________________________________

___________________________________________________________________________________________________
50 percent of the
cost incurred on
patent
registration,
subject to a limit
of Rs. 10 Lakhs
[of this, up to Rs.
4 Lakhs is on cost
of patent filing
etc.; the balance
is payable on final
registration of the
patent]
Proposed creation
of Centre of
Excellence (CoE)
in the state
Employment Monthly Textile Park will be Provision of Assistance for
and employee employment provided financial financial Construction of
related subsidy for the assistance @ 25 assistance @50 Dormitories: Assist
support employees percent of the cost of percent of project ance of 50
ranging from Rs. Hostel/ Dormitory cost of Hostel/ percent land cost
1,000- Rs. 3,750 Housing within the Dormitory with upper cap of
on the roles, for a Park for a minimum Housing for 50 Lakhs
period of 5 years of 100 workers domicile workers
for all activities in domiciled in Gujarat maximum up to
textile value chain Rs. 2 Crores to
The state
(except ginning, park
Government shall
spinning)
provide 50 percent of Employment
the wages @ Rs. Generation
4,000/- for female Subsidy: Upto Rs.
employee and Rs. 36,000 per year
3200/- for male per employee for
employee per month 5 years or 20
for a period of 5 percent of the
years as payroll SGST deposited,
assistance to new whichever is less
enterprise to all category of
Textile enterprises
Gujarat Amendment:
Provision of Ramp-up
period of 6 months
available to applicants
to ensure industry
gets maximum
benefit of payroll
assistance under the
Policy
Source: IIT Delhi Research
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Table 12.2: Comparison of support offered by States to textile/technical textile industry

(States covered: Karnataka, Kerala, Madhya Pradesh and Maharashtra)
Heads Karnataka Kerala Madhya Pradesh Maharashtra

Main Operative ‘Textile policy 2004-09’ Provisions related to Special provisions for Declared its ‘Textile
Policy which was followed by a garment sector of textile & apparel industry Policy 2011-17’ in
new ‘Textile Policy textile covered in as a part of the Industrial January 2012, later
2008-13 (Suvarna the State’s Promotion Policy 2014 declared ‘Textile
Vastra Neethi 2008- ‘Industrial & Strategy of the State
2013)’. ‘Textile Policy- Commercial Policy for 2018-23’ with
Nuthana Javali Neethi 2015’, improvised special emphasis on
2013-2018’ was re- into ‘Kerala emerging technical
introduced, with Industrial & textiles market
technical textile sector Commercial Policy
elaborately mentioned 2018’
and supported in the
policy. After 2018, the
policy again got
improvised and State
government brought
out a new textile and
garment policy 2019-24
Land and One time grant support Proposed 50-75 percent rebate on 9 percent of project
infrastructure for development of construction of land premium (on land cost up to Rs. 25
support common infrastructure industrial parks, size) for MPIDC Lakhs is provided to
for Greenfield Parks which also have developed industrial technical textile parks
with individual textile units areas, 50 percent rebate set up under Scheme
promoters up to 25 offered if undeveloped for Integrated Textile
percent of the project land parcel is leased from Parks (SITP)
cost or Rs. 25 Crores MPIDC. Maximum area
per Park project, admissible for rebate- up
whichever is less (in all to 40 Hectare.
zones). One time grant Infrastructure
support for the development @50
development of percent, Maximum limit-
common infrastructure Rs. 1.00 Crores each for
for Greenfield Parks of developing water, power
up to 40 percent of the and roads infrastructure
project cost or Rs. for private or
40.00 Crores per Park undeveloped Govt. land
project, whichever is
Development Fee related
less (for SPV). One time
subsidy for
grant support for the
development of Apparel/Garment Sector
common infrastructure 50 percent discount
for Brownfield Parks of offered for taking lease
up to 40 percent of the land in the industrial area
project cost or Rs.
12.00 Crores per Park Infrastructure
project, whichever is development
less (for SPV) subsidy @50 percent
with a maximum limit of
INR 1.00 Cr each for
developing Water, Power
and Roads
infrastructure for Private
or Undeveloped Govt.
Land
Capital subsidy 30 percent, 25 percent Fixed Capital rebate Investment Promotion 10 percent Capital
and 20 percent are of Rs. 20-30 Lakhs Assistance (IPA) offered subsidy for textile
_______________________________________________________________________________________________

___________________________________________________________________________________________________
allowed for MSME depending on to large scale industries units located in

Enterprise of zone 1, 2 category of unit for from 40 percent-10 Vidharbha,
and 3. 25 percent, 20 investment in Land, percent of investment in Marathwada and
percent and 15 percent Building, Plant & plant and machinery North Maharashtra
are allowed for Large machinery,
Minimum investment- Rs. General category- 40
Enterprise of zone 1, 2 Electrification,
10 Crores. SGST percent,
and 3. 50 percent Essential Office
reimbursement with SC/ST/Minority
capital subsidy or Rs. 5 Equipment,
maximum ceiling of 100 category- 45 percent,
Crores whichever is less Pollution Control
percent investment in Production of yarn,
for establishment of Devices and other
plant and machinery cloth, and other non-
Effluent Treatment fixed assets
approved under TUFS conventional yarn
Plants (ETPs)
scheme. Tax-delinked products- 10 percent,
SGST reimbursement Additional capital- 20
under customised percent, Units having
package for Mega Forward/Backward
projects integration- 5 percent
Interest 5 percent p.a. on term - @2 percent for 5 years State will provide
subsidy loans for the first 5 on term loan taken for interest subsidy so
years for units in zone TUFS approved P&M, that the effective rate
1, 2 and 3 Maximum limit- Rs. 5 of interest payable by
Crores for units having eligible units will be
investment up to Rs. 25 0-2 percent
Crores. @ 5 percent for 5
years on term loan for
existing stand-alone
textile units with an
investment > Rs. 25
Crores. @ 7 percent for 5
years on term loan for
Composite textile unit
with an investment > Rs.
25 Crores
Power cost Reimbursement of cost - Power tariff rebate as Power subsidy of Rs.
support of power paid at Rs. well as electricity duty 2.00 to Rs. 3.77 per
1.00 per unit for a rebate under customized unit depending on the
period of 5 years for package for Mega category of enterprise
both Large and MSME projects
All eligible new Units
Enterprise located in
in Group C, D, and
zone 1,2 and 3
D+ areas and No-
Industry District(s)
and Naxalism affected
Area will be exempted
from payment of
Electricity Duty during
eligibility period not
exceeding 15 years
Technology - Current efforts to Available as per different Proposed latest
upgradation promote the use of categories of upgradation technological centres
related support coir as Geotextiles established with the
for better help of institutions
conservation of such as IIT, SASMIRA
water and soil, and WRA, which are
intends to invest actively involved in
efforts towards R&D
market
5 percent subsidy on
development of coir
capital equipment for
fibres for Geotextile
Technology Up-
application
gradation, subject to
_______________________________________________________________________________________________

___________________________________________________________________________________________________
a maximum of Rs. 25
Lakhs
capital equipment for
cleaner production
measures limited to
Rs. 5 Lakhs
Stamp duty Stamp Duty Exemption - Stamp Duty Exemption 50 percent, 75
exemption and concessional under customized percent and 100
registration charges package for Mega percent exemption
rate of Rs. 1.00 per Rs. projects available to units
1000 depending on their
category/classification
Skill support - Proposed set up of Skill State Textile
skill learning centres development/training University will be set
incentive under up in Vidarbha
customised package for providing specialised
Mega projects courses in the
focussed sectors
Quality Grant of Rs. 10 Crores - Reimbursement of patent 75 percent subsidy on
development for setting up of Centre charges @100 percent up expenses incurred on
and R&D of Excellence for textile to Rs. 5 Lakhs per patent quality certification
support to be funded by the limited to Rs. 1 Lakh
State Government
Assistance up to 50 the expenses incurred
percent, Max Rs. 50,000 on patent registration
for Energy limited to Rs. 10
Audit/WaterAudit/Enviro Lakhs for the National
nmental Compliance patents and Rs. 20
which will be applicable Lakhs for the
in each case separately International patents
Employment 75 percent -
and employee reimbursement of
related support employer’s contribution
of wage rate per
employee per month for
all the new units for 5
years for MSMEs located
in zone 1, 2 and 3
Table 12.3: Comparison of support offered by States to textile/technical textile industry (States
covered: Odisha, Punjab, Rajasthan and Tamilnadu)
Head Odisha Punjab Rajasthan Tamilnadu
Operative Odisha Industrial Policy Punjab Industrial and Rajasthan Investment Tamil Nadu Integrated
Policy Resolution, 2015 Business Promotion Scheme Textile Policy, 2019
Development Policy, 2019
2017
Land and Land available at Land Cost Rebate: 50 percent exemption
Infrastructure subsidised rates for all Land cost is from payment of stamp
Support industries including considered under duty and land tax for 7
textile industry. Fixed Capital years
25 percent subsidy on Investment for
cost of land: incentives under
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Applicable for Anchor Punjab's Industrial &

Industrial Units of a Business
technology park Development
Policy 2017
Exemption from
payment of premium 100 percent
due to change of land- exemption from
use charges): Change of Land Use
100 percent up to 100 Charges and External
acres and 50 percent Development Charges
for balance area
Capital 10 percent of - - Credit Linked Capital
Subsidy investment with a Investment Subsidy of 15
maximum of Rs. 10 percent for investments
Crores, Rs. 20 Crores on eligible machinery in
and Rs. 30 Crores for Technical Textiles under
the locations A1/B1, ATUFS
A2/B2 and A3/B3
5 percent Additional
respectively
Capital Subsidy for new /
50 percent of the expansion of textile units
infrastructure cost with set up in southern
a ceiling of Rs. 10 districts
Crores per green field
industrial park/cluster
50 percent of total cost
with a ceiling of Rs. 5
crores for up gradation
of brown field clusters
For MSME: Subsidy
@25 percent for
General and @30
percent for SC/ST
Interest 5 percent per annum 5 percent interest 5 percent on term loans 6 percent interest subsidy
Subsidy on term loan for a grant to MSMEs for for 5 years for existing in addition to any other
period of five years, to new/expansion/divers units. Additional 1 incentives available from
a maximum of Rs. 1 ification in addition to percent interest subsidy the Government of India
Crore ATUF benefits for a if additional investment
period of three years in eligible plant &
with an annual limit machinery is more than
of Rs. 10 Lakhs Rs. 25 Crores,
7 percent per annum
for new enterprises
Power cost Reimbursement of Rs. Electricity (variable 50 percent exemption Electricity Tax exemption
support 0.25 - 1.25 per unit for tariff) @ Rs. 5 per from payment of for 2 years to 5 years on
a period of 5 years, unit to all industrial electricity for 7 years power purchased from
based on employment units TANGEDCO or generated
and investment levels or consumed from
100 percent
as defined in the policy captive sources
exemption from
100 percent Exemption payment of Electricity
from Electricity duty for Duty for 15 years
a contract demand of 5
MVA for 5 years
One-time
reimbursement of
Energy audit cost for
MSMEs with maximum
cap of Rs. 3 Lakhs
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Plant & Environmental - - Concessional Custom

Machinery/ Protection Duty of 5 percent for
Technology Infrastructure Subsidy specific technical textile
upgradation of Rs. 20 Lakhs or 20 machinery
related percent of capital cost
Financial support of 9
support of setting ETP for
percent of project cost
MSMEs
(max Rs 9 Crores) to
Assistance for 100 Technical Textile Park
percent of cost of
purchase of technical
know- how up to Rs. 1
Lakh in case of
indigenous technology
and up to Rs. 5 Lakhs
in case of imported
technology
Stamp duty 100 percent Exemption 100 percent 50 percent exemption 100 percent Stamp Duty
exemption with respect to land exemption or from Stamp duty of Exemption will be given
allotted by the reimbursement of purchase or lease of for technical textile
Government to IDCO or stamp duty on land projects
Govt/IDCO to Private purchase or lease of
Industrial Estate land and building
Developers or when
transfer of land/shed
by Govt, IDCO and
Private Industrial Estate
developer to industrial
units
On Loan agreements,
credit deeds,
mortgages and
hypothecation deeds
executed by the
Industrial Units in
favour of Banks or
Financial Institutions
Skill support Entrepreneurship - - 25 percent subsidy will
Development be provided for setting
Subsidy: Reimburseme up of new training
nt of 75 percent of centres for Apparel and
course fee limited to Textiles linked with
Rs. 50,000 per course ITIs, towards machinery
Reimbursement of purchased, subject to a
training cost up to Rs. maximum ceiling of
1750 – 4000 per Rs. 20 Lakhs per centre.
person: Subsidy will be given
through Tamilnadu Skill
For every person newly
Development
trained or undergoing
skill upgradation for a Agency
period of three years,
based on employment
and investment levels.
50 percent of skill
upgradation or training
for local manpower:
For MSMEs: Up to Rs.
3000 per person for
_______________________________________________________________________________________________

___________________________________________________________________________________________________
maximum 10 persons
in micro and 20
persons in Small and
Medium enterprises.
Additional Rs. 1000 per
women trainee
Quality 100 percent of the To set up Technology - Subsidy upto Rs.2 Crores
development registration for Patent Centre for Advanced per CFC is provided for
and R&D Registration cost up to Textiles which will setting up of design
support maximum of Rs. 10 serve as a research centre / studio, testing
Lakhs and demonstration facilities, training centre,
centre for the latest information cum trade
Quality Certification:
tools centre and common raw
Renewal for
material / yarn / sales
consecutive two years
depot, water treatment
i.e. for a period of 3
plant, dormitory, worker's
years @ 100 percent to
residential space, pre-
a total maximum limit
weaving and post-
of Rs. 3 Lakhs
weaving facilities etc
Employment For Workers' Hostel: Employment - Soft loan to be provided
and Employee Land rate at 50 percent Generation subsidy to companies employing
related of the prevailing with no domicile more than 1500 people
support market rates of IDCO restriction is offered and located in certain
for 1-3 acres of land, upto Rs. 36,000 per notified districts of
based on employment employee per Tamilnadu
and investment levels. year upto 5 years
Employment generation
Upto Rs. 48,000 per
incentive:
employee per year for
Rs. 1500 per worker
Women & SC/BC/OBC
per month for 36
upto 5 years
months if 90 percent of
workers are domicile of
Odisha with minimum
200 employees
@ 100 percent
Reimbursement of
Employment Cost
Subsidy (ESI/ESF):
For 3 years for
displaced employees
and for 5 years for
disabled employees
@ 75 percent for male;
100 percent for female:
For Micro & small units
for 5 years
@ 50 percent for male;
100 percent for female:
For Medium units for 3
years
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Table 12.4: Comparison of support offered by States to textile/technical textile industry (States
covered: Telangana, Uttar Pradesh, Uttarakhand and West Bengal)
Head Telangana Uttar Pradesh Uttarakhand West Bengal
Operative Telangana Textile and Uttar Pradesh Handloom, Mega Textile West Bengal textile Policy
Policy Apparel Policy, 2017-18 Power loom, Silk, Textile Policy 2014 2013-18
& Garmenting Policy
2017
Land and Extended rebate of 50 50 percent of land cost 50 percent
Infrastructure percent of the cost in any (30 percent in GB Nagar rebate on the
Support new Textile Park, with an district) on land purchase prevailing land
upper limit of rebate of Rs. from State Agencies prices of the
20 lakhs per acre to the State
anchor customer(s) and Infrastructure
first movers and Industrial
Development
In the case of technical
Company of
textile units, an additional
Uttarakhand
25 percent rebate will be
(SIDCUL)
extended with a limit of
Rs. 10 Lakhs per acre
Capital 35 percent capital subsidy 25 percent for plant and 15 percent to 10 percent-40 percent
Subsidy with capping as per machinery based on the maximum capital subsidy is offered
categories for technical investment limit of Rs. 50 depending on category of
textiles Lakhs for unit and its location zone.
MSMEs and 15 Subject to a ceiling of Rs.
For SC/ST and additional
percent to the 50 Lakhs for small
5% of capital subsidy is
maximum limit enterprise
offered
of Rs. 30 Lakhs
20 percent additional
for heavy
subsidy is offered on
industry
admissible subsidy for all
enterprises wholly owned
by women, SC/ST and
minority community
entrepreneurs
This incentive would be
in addition to what the
unit gets under any
scheme of GoI
Interest 75 percent of the interest 7 percent up to Rs. 1.50 Interest subsidy For micro and small units
Subsidy rate of the loans availed by Crores (up to Rs. 75 of 7 percent for subsidy offered by state
a unit, subject to a cap of Lakhs for GB Nagar) for 7 7 years up to a is 6 percent for all units
8 percent per annum, for years for procurement maximum limit and 7.5 percent to units
technical textile related under TUFS of Rs. 50 Lakhs set up in the C and D
projects for 8 years to be paid Zone districts for 5 years
50 percent on purchase
annually
of land for 7 years up to For Medium Enterprise in
Rs. 50 Crores and @60 Zone B & C – 25 percent
percent for 7 years for of total Term Loan
construction of staff- Interest subject to ceiling
quarters, of Rs. 175.00 Lakhs per
hostel/dormitory year for 5 years
Infrastructure interest For Medium enterprise in
subsidy: Zone D – 25 percent of
5 percent up to Rs.1 total Term Loan Interest
Crore for 5 years per unit subject to ceiling of Rs.
for developing 175.00 Lakhs per year for
infrastructural amenities 7 years
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Power cost Power subsidy of Rs. 1.50 100 percent subsidy to Reimbursement Micro & Small Enterprise-
support to 2.50 per unit for new units for 10 years of 1- per unit on 100 percent waiver for 4
Technical Textiles units of the energy bill years for Zone A & B and
different categories and 100 percent for 6 years for Zone C &
electricity tax D
refund for 5
Medium Enterprise- Zone
years
B & C - 100 percent
waiver of electricity on
the electricity
consumption for 5 years
subject to maximum of
Rs. 25.00 Lakhs per year
or Rs. 1.25 Crores for 5
years.
Medium Enterprise in
Zone D – 100 percent
waiver of electricity duty
on the electricity
consumption for 5years
and 75 percent waiver
from the sixth year upto
tenth year subject to
maximum of Rs. 50.00
Lakhs per year or Rs.
2.50 Crores in 5 years
Plant & Financial assistance of up Rebate of 25 percent of
Machinery/ to 50 percent of the the project expense
Technology investment in technology subject to a cap of Rs 5
upgradation development, subject to a Lakhs to help business
related maximum amount of Rs. growth, branding and
support 10 Lakhs per design
process/product will be
offered to eligible units
Stamp duty 100 percent 100 percent (75 percent 100 percent
exemption reimbursement of the in GB Nagar district) to exemption from
stamp duty/transfer duty developer and @50 stamp duty
paid during purchase of percent to first buyer of
land plot/unit
Skill support Training subsidy of Rs.
3000 per employee to the
companies to reimburse
the cost incurred in skill
upgradation and training
the local manpower. The
subsidy shall be Rs. 5000
per employee for units
employing more than 1000
persons
Quality 20 percent subsidy will be Reimbursement of 50 5 percent up to

development offered by state percent of cost up to a Rs. 1 Crore for 5
and R&D government for the annual limit of a maximum of Rs. years per
support expenditure of the firm on 5 Lakhs for expenses laboratory for
design and product incurred in securing research and
development expenditure registration of patent quality
limited to a maximum improvement
Reimbursement for
subsidy of Rs. 2 Lakhs per
expenditure incurred in
year
Quality Certification:
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Micro & Small Enterprise-

50 percent of cost
subject to a ceiling of Rs.
5 Lakhs for obtaining
certification
/accreditation like ISO-
9000, ISO-14000, ISO-
18000, Social
Accountability Standards,
OEKO-TEX etc.
Employment EPF
and Employee reimbursement
related for 5 years to
support new unit @50
percent with
minimum 100
workers & @ 60
percent with
minimum of 200
workers
12.3 Findings regarding attractiveness of states

The information regarding provisions of policies of various identified states which have been presented in the
tables above have been analysed under different heads as follows:
1. Existence of a separate Textile Policy: Presence or absence of a policy that is specially dedicated
to textiles is an important indicator of the relative emphasis placed by any state government on
growth and development of textile industry within the state. A study of the policies of 17 states
revealed that Bihar, Kerala, Madhya Pradesh, Odisha, Punjab and Rajasthan do not have a separate,
exclusive textile policy. Even if these states have provisions of benefits and incentives for textile
industry, these have been mentioned as part of their respective industrial policies.
2. Mention of and special provisions for ‘Technical Textiles’ in state policies: The mention of
‘technical textiles’ in the state’s policy document is one of the pointers towards a state’s ability to
recognise the need for focusing distinctive actions and attention towards technical textiles. It is
observed that except for three states – Kerala, Madhya Pradesh and Uttar Pradesh, all other states
have made a mention of ‘technical textiles’ as a distinct area of attention and focus. Some like
Telangana, Tamilnadu, Gujarat and Andhra Pradesh have made special provisions for technical textiles.
3. Support for Land and Infrastructure cost: Land and infrastructure cost is a major expenditure for
the enterprise. The level of support extended by the state government contributes significantly
towards determining the level of attractiveness of the state for setting up the enterprise. Despite this,
it is observed that out of 17 identified states, there is no land and infrastructure support offered by
the five state governments – Bihar, Kerala, Rajasthan, Tamilnadu and West Bengal. Maharashtra
provides only 9% upto Rs. 25 Lakhs and Punjab too offers relatively lesser benefit in the form of land
cost being considered under Fixed Capital Investment for incentives as well as 100% exemption from
Change of Land Use Charges and External Development Charges, which anyways is offered by many
_______________________________________________________________________________________________

___________________________________________________________________________________________________
other states. Andhra Pradesh, Telangana and Uttar Pradesh are the states offering the best package
at 50 percent of the land cost plus other related benefits. Gujarat, Karnataka and Odisha at 25% also
have a reasonably attractive package. Haryana too offers 50% of the project cost as rebate but only
upto a limit of Rs. 10 Crores making it more suitable for relatively smaller units. Telangana offers
additional sops, over and above attractive benefits, especially to technical textile units.
4. Provision for Capital Subsidy: In addition to the support for cost of land and infrastructure, the
benefit given by the state to enterprise in the form of Capital Subsidy is an important, relatively high
value incentive which is extremely crucial for determination of state’s degree of attractiveness for the
enterprises. Punjab and Rajasthan do not offer any subsidy under this head. Kerala, with its Fixed
Capital rebate of Rs. 20-30 Lakhs depending on category of unit amounts to relatively little support.
West Bengal too offers minor benefit under this head. Gujarat, Haryana, Maharashtra and
Uttarakhand offer relatively low levels of support as Capital Subsidy. Andhra Pradesh, Bihar, Madhya
Pradesh, Jharkhand, Odisha, Tamilnadu, Telangana and Uttar Pradesh offer significant support by
providing substantial Capital Subsidy benefits.
5. Interest Subsidy: The enterprises often borrow money as term loans from RBI recognised
institutions. Indian economy has a high interest regime relative to the world. This adds extra costs
to the enterprise’s offerings and the products have to be priced higher to cover the additional costs,
making them unaffordable and non-competitive in the domestic and international markets. Many
states offer interest subsidy and subvention to act as an incentive for enterprises to locate
themselves in the state and restore competitiveness of enterprises’ products. Andhra Pradesh (8%),
Jharkhand (7%), Karnataka (5%), Maharashtra (so that maximum interest payable is 0-2%),
Telangana (~6-8%), Uttar Pradesh (7%) and Uttarakhand (7%) offer high interest subsidy. The
states other than these offer interest subsidy in the range of 3-6% with relatively shorter tenures
which makes the benefit relatively minor for the enterprises in such states.
6. Assistance for technology upgradation: Technical textile is a new, rapidly changing field where
new product development and innovation are the key. The states are perceived as attractive if the
governments incentivise enterprises by providing either immediate cost reimbursement/cost sharing
or facilitating a benefit with a long gestation period by financing the establishment of R&D facilities. It
is reasonable to assume that the immediate benefits will be factored in by enterprises while evaluating
their choices of locations and assessing the attractiveness of the state. It is noticed that Bihar,
Gujarat, Jharkhand, Karnataka, Kerala, Punjab, Rajasthan, Uttar Pradesh and Uttarakhand do not
offer any assistance for technology upgradation. Andhra Pradesh, MP, Maharashtra, Odisha,
Telangana and Tamilnadu do provide good support whereas Haryana provides moderate support.
Tamilnadu recognises the importance of technical textile units and provides additional support for
technology upgradation to technical textiles units located in the state.
7. Quality improvement and R&D assistance: The types of support that state governments offer to
enterprises to promote quality improvement, testing and R&D is of two types. Firstly, the short
gestation period incentive in the form of reimbursements of costs incurred in certification from leading
quality certification agencies as well as for filing and obtaining patents (national and international).
The long gestation period support in this regard consists of financing the establishment of Centres of
Excellence and other testing/validation facilities. A study of the state policies shows that Andhra
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Pradesh, Bihar, Gujarat, Haryana, Kerala, Rajasthan and West Bengal do not provide any assistance.
Jharkhand, Maharashtra, Madhya Pradesh, Uttar Pradesh and Uttarakhand offer good assistance in
the form of reimbursement of patent and quality certification costs. Odisha and Telangana offer best
assistance as they provide short term as well as long term assistance. Karnataka offers very nominal
assistance and Tamilnadu offers support that is long term in nature by helping to set up facilities.
8. Power Cost support: The subsidy on cost of power, concessional rates charged for power supply,
waiver of electricity charges and electricity duty are the types of benefits that are offered by state
governments under this head. An examination of the policies of state governments disclosed that
Bihar, Haryana, Kerala do not provide any power subsidy or concession on electricity duty to industrial
units. Uttar Pradesh offers the most attractive incentive in the form of 100% power cost waiver to
units (for 10 years) while West Bengal gives power cost waiver for 5-6 years only for MSME units.
Jharkhand, Punjab and Rajasthan offer substantial support in the form of ~50% rebate for 7 years.
Maharashtra at a maximum subsidy of Rs. 3.77 per unit and Andhra Pradesh and Gujarat at Rs. 2 per
unit also offer significant support to eligible manufacturing units. Madhya Pradesh (variable support
provide unit is classified as mega project) and Karnataka (subsidy of Rs. 1 per unit) also offer some
concession on power bills which benefits enterprises established in the respective states. Telangana
offers power subsidy of Rs. 1.50 to 2.50 per unit for technical textiles units of different categories.
9. Stamp Duty exemption/reimbursement: The 100% exemption or partial concession on payment

of stamp duty on land transactions in the state is one of the common incentives provided by state
governments to attract industry to their respective states. It is observed that Bihar, Kerala and West
Bengal do not offer any exemption on payment of stamp duty and Madhya Pradesh (for only Mega
Projects) and Maharashtra (percentage of exemption dependent on and classification of units’ size and
location) offer it selectively. Haryana offers 50% exemption. All other states offer 100% exemption
albeit some of them with a few conditions.
10. Support for Skill building: The improvement in quality of human resources associated with
technical textiles is an important determinant for business success of enterprises in this industry. It
impacts all stages of the value chain and any support from state governments regarding this aspect
may act as an incentive for technical textile enterprises. Karnataka, Punjab, Rajasthan, Uttar Pradesh,
Uttarakhand, West Bengal do not offer any support for skill building. Gujarat, Haryana, Kerala,
Maharashtra and Tamilnadu offer long term support for setting up of training institutions. Odisha and
Jharkhand (reimbursement of training expenses upto Rs. 13,000 per trainee employee), AP
(reimbursement of training expenses upto 7500-10,000 per trainee employee plus assistance for
institution), Telangana (offers reimbursement of Rs. 3000-5000 per employee) are proactive in
providing direct support in the form of reimbursement of training cost to the manufacturing firms and
becoming attractive states or companies who wish to invest significantly in upgrading the skills of
their employees. Government of Madhya Pradesh also offers support for such activity but it is
available only to those units that are classified as mega projects by the state government.
11. Employment and employee related support: One of the main reasons why different states
compete for attracting industrial investment is the positive impact such investments can have on
generation of employment within the state. The types of support that states offer for employment can
either be in terms of part or full funding of facility creation like worker dormitories/hostels/other
_______________________________________________________________________________________________

___________________________________________________________________________________________________
common facilities or direct cash assistance /employers’ EPF contribution reimbursement on a per
employee basis. While some states insist that the support will be available only if the employees are
domiciled in that particular state, there are other states which do not have any such condition. A
study of policies of 17 states reveals that Bihar, Kerala, Madhya Pradesh, Maharashtra, Rajasthan,
Uttar Pradesh, Uttarakhand and West Bengal do not provide any specific support to the enterprises for
expenses incurred on employees or employment generation. Andhra Pradesh, Karnataka and Punjab
offer straightforward incentive /reimbursement on a per employee basis. Gujarat, Haryana, Odisha
and Telangana (50% of EPF reimbursement) offer blend of both short term (direct reimbursement)
and long-term (assistance for creating accommodation and common facilities for worker community).
Jharkhand offers support only for long-term asset creation. Tamilnadu offers soft loan for companies
employing more than 1500 people and located in certain notified districts of Tamilnadu.
12.4 Inferences and conclusions regarding

attractiveness of states
A careful examination of the findings that have been elucidated in the preceding passages lead to following
step-wise approach to identify attractive states based on inferences and conclusions:
1. Exclude relatively less attractive states: There are certain states which offer very low levels of
support, incentives and benefits. These states may be excluded from consideration as among
attractive states for technical textiles. As per the information available, these states are Bihar, Kerala,
Punjab and West Bengal.
2. Eliminate states with low level support in high value heads: States which do not offer ‘substantial
benefits and incentives’ in high value heads such as support for land and infrastructure, support for
capital subsidy, interest subsidy and support for technology upgradation may be taken out of
consideration. These states are Maharashtra and Uttarakhand.
3. Remove the states that impose stiff conditions: Remove the states that place limitations for availing of
high value incentives as described earlier. Based on this criteria, Madhya Pradesh will be removed
from the list of attractive states.
4. Exclude states having poor industrial infrastructure: Based on this criteria Jharkhand will get
eliminated.
5. Determination of relatively attractive states: The states that remain after the above mentioned
considerations, are relatively more attractive for investments in technical textiles. These can be
arranged based on the level of incentives on low value heads. Based on that criteria, Andhra Pradesh,
Telangana, Tamilnadu, Gujarat, Uttar Pradesh, Karnataka and Odisha are more attractive and
Rajasthan and Haryana are relatively less attractive states.
_______________________________________________________________________________________________

13. Analysis of Technical
Textiles Trade of India
Vibrant international trade is important for the growth and development of any industry. This section presents
an analysis of India’s exports and imports of technical textile products for the period 2012-13 to 2019-20. The
data has been sourced from official website of Department of Commerce, Government of India for this
purpose. As per the present practice, India’s trade data for technical textile is compiled and analysed on the
basis of 207 ITC HS codes notified by Government of India. It is suggested that a comprehensive list of 449
ITC HS codes (including 207 HSN codes notified by the Government of India) as presented in Annexure 1 and
Annexure 2 of this report be adopted as an improvement over the current list of 207 ITC HS codes. The
analysis of India’s trade has been presented in the following sections on the basis of 449 ITC HS Codes.
13.1 Overview
In the eight-year period (2013-2020), average exports of technical textile items on the basis of 207 HSN
codes were Rs. 10,542.63 Crores and average imports were Rs. 11,600.49 Crores. The total exports have
grown at a CAGR of 12.14% whereas the total imports have grown at a CAGR of 9.50% over this time period.
Based on the proposed 449 ITC HS code classification, in the eight-year period (2013-2020), average exports
of technical textiles were Rs. 61,142 Crores whereas average imports were Rs. 41,410 Crores. Total exports
have seen a growth from Rs. 46,215 Crores to Rs. 72,241 Crores at a CAGR of 7%. During the same period,
imports have grown from Rs. 31,005 Crores to Rs. 51,597 Crores, at a CAGR of 8%.
13.2 Balance of Trade

Over the last eight years, India has reported a trade surplus for all the years. For 2019-20, India’s exports and
imports were Rs. 72,241 Crores and Rs. 51,597 Crores respectively. Due to higher absolute growth in exports
than imports, the surplus has increased over the last eight years from Rs. 15,210 Crores in 2012-13 to Rs.
20,644 Crores in 2019-20.
Figure 13.1: Value of Exports and Imports of Technical Textiles (2012-13 to 2019-20) (Rs. Crores)
75,484 72,241
58,656 58,671 59,001 63,003
55,865 54,351
46,215 46,423 51,597
36,492 39,145 39,190
31,005 33,076
2012-13 2013-14 2014-15 2015-16 2016-17 2017-18 2018-19 2019-20
Exports Imports
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Table 13.1: Comparison of Export and Import Data of Technical Textiles (Rs. Crores)
Period 2012-13 2013-14 2014-15 2015-16 2016-17 2017-18 2018-19 2019-20 Aggregate
Based on existing 207 HSN Code Classification
Exports 6,338 8,809 10,343 10,107 9,413 11,193 13,987 14,152 84,341
y-o-y
39% 17% -2% -7% 19% 25% 1% 12%
growth
Imports 7,666 8,987 10,111 10,963 11,342 13,705 15,645 14,385 92,804
y-o-y
17% 13% 8% 3% 21% 14% -8% 9.5%
growth
Trade -1,328 -178 232 -856 -1,930 -2,512 -1,658 -234 -8,463
Status Deficit Deficit Surplus Deficit Deficit Deficit Deficit Deficit Deficit
Based on proposed 449 HSN Code Classification
Exports 46,215 55,865 58,656 58,671 59,001 63,003 75,484 72,241 4,89,136
y-o-y
21% 5% - 1% 7% 20% -4% 7%
growth
Imports 31,005 33,076 36,492 39,145 39,190 46,423 54,351 51,597 3,31,279
y-o-y
7% 10% 7% 0% 18% 17% -5% 8%
growth
Trade 15,210 22,789 22,164 19,526 19,811 16,580 21,133 20,644 1,57,857
Status Surplus Surplus Surplus Surplus Surplus Surplus Surplus Surplus Surplus
Source: Department of Commerce, GOI (IIT Delhi Analysis)
13.3 Segment-wise analysis of Exports and

Imports in India
The 449 ITC HS codes have been segregated into various application segments to gauge how individual
segments have contributed to the overall trade trends. This will also help in understanding the products/
segments where policy interventions may be required. Technical textile products are segregated into twelve
application segments. International trade analysis has been done for all segments except Oekotech because of
non-availability of appropriate data.
Figure 13.2: Trade Surplus (Deficit) across application segments from 2012-13 to 2019-20 (Rs. Crores)
35,000
30,000
25,000
20,000
15,000
10,000
5,000
-
(5,000)
(10,000)
2012-13 2013-14 2014-15 2015-16 2016-17 2017-18 2018-19 2019-20
(15,000)
Agrotech Buildtech Clothtech Geotech Hometech Indutech

Meditech Mobiltech Packtech Protech Sportech
_______________________________________________________________________________________________

___________________________________________________________________________________________________
The figure above indicates that most of the segments have shown a trade surplus over the study period
except for Indutech, Meditech and Geotech.
13.3.1 Export distribution across segments and countries

Mobiltech segment, with a share of 29%, is the largest contributor to exports in terms of value in 2019-20.
Packtech segment has second largest value of exports in 2019-20 with a share of 24%.
Share of Packtech segment in total exports has increased from 19% in 2012-13 to 24% in 2019-20. On the
contrary, the share of Mobiltech segment has decreased from 35% in 2012-13 to 29% in 2019-20.
The top five segments contributing to the exports are Mobiltech, Packtech, Indutech, Hometech, and
Clothtech. These have a combined share of 93% in 2019-20.
Figure 13.3: Distribution of exports across segments (2019-20)
Agrotech
Sportech Buildtech
1%
1% 1%
Protech
1% Clothtech
13%
Packtech
24%
Hometech
13%
Indutech
Mobiltech 14%
29% Meditech
3%
Table 13.2: Five countries with largest imports of Indian technical textiles items (2019-20)
Country Total Value of imports (Rs. Crores) Share in total exports (%)
USA 16,380 22.7
Germany 4,102 5.7
UK 3,330 4.6
Turkey 3,040 4.2
UAE 2,423 3.4
Total 29,274 40.5
The table given above reveals that USA is the largest importer of Indian Technical Textiles products in 2019-
20 with a share of 23% of India’s exports. The share of USA has increased from 17% in 2012-13 to 23% in
2019-20. Germany is the second largest importer of Indian Technical Textiles products with a share of about
6%. The total share of exports to five top export destinations is 40.5%. Exports of technical textiles products
from India is relatively dispersed and therefore India’s technical textiles industry is relatively less sensitive to
country risks.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
13.3.2 Distribution of Imports across segments and countries

Figure 13.4: Import distribution across segments (2019-20)
Protech Sportech
1% 1% Clothtech
5% Geotech
Packtech
8% 1%
Hometech
6%
Mobiltech
35%
Indutech
37%
Meditech
6%
Indutech segment had the largest share in value of imports in 2019-20 at 37%. The share of Indutech
segment in total imports increased from 30% in 2012-13 to 37% in 2019-20. Mobiltech segment has the
second largest share in value of imports in 2019-20 at 35%. Its share in imports decreased from 47% in
2012-13 to 35% in 2019-20. The top five product segments comprising India’s imports are Indutech,
Mobiltech, Packtech, Meditech and Hometech. All put together, these five segments have a combined share of
92% (2019-20).
Table 13.3: Five largest exporters of Technical Textiles items to India (2019-20)
Total Value of Exports (Rs.
Country Share in total imports (%)
Crores)
China P RP 19,289 37.4
Korea RP 5,632 10.9
Germany 3,636 7.0
USA 2,576 5.0
Hong Kong 2,569 5.0
Total 33,702 65.3
In terms of countries, China is the biggest exporter of technical textiles goods to India in 2019-20. Its share in
India’s import basket increased from 31% in 2012-13 to 37% in 2019-20.
Korea is the second largest exporter of Technical Textiles goods to India in 2019-20 making up almost 11%
share. China, Korea, Germany, USA, and Hong Kong are the five largest exporters of technical textiles goods
to India in 2019-20. Imports from these top five countries constitute 65% of the total imports of technical
textiles. Imports of technical textiles items are concentrated and therefore, there is a high dependence on a
handful of countries. This tends to increase the country risks for India.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
13.3.3 Conclusion
Based on the calculation using the proposed 449 code classification, India has been generating trade surplus
in technical textiles for the last eight years – from 2012-13 to 2019-20. Packtech has been a major contributor
towards this surplus. Its contribution towards total trade surplus has consistently increased from Rs. 6,845
Crores in 2012-13 to Rs. 12,971 Crores in 2019-20.
Eight segments – Packtech, Clothtech, Hometech, Mobiltech, Protech, Agrotech, Sportech, and Buildtech – are
surplus segments in technical textiles for 2019-20. Indutech, Meditech, and Geotech are deficit segments in
technical textiles for 2019-20.
USA is the largest importer of technical textiles from India. China is the largest exporter of technical textiles to
India.
In terms of segments, Mobiltech occupies the largest share in total exports whereas Indutech tops the
segments for largest share in imports.
13.4 Segment-wise analysis of Exports and

Imports of Technical Textiles products in India
The preceding paragraphs throw light on the overall trade trend of the 449 ITC HS codes undertaken for the
analysis. The 449 codes have been further analysed based on their categorisation into eleven application
segments (based on information it was not possible to categorise any of the 449 ITC HS codes as belonging to
Oekotech segment).
13.4.1 Agrotech
The following section presents international trade analysis of four ITC HS codes corresponding to Agrotech
segment in India.
Figure 13.5: Value of Exports and Imports of Agrotech Segment (2012-13 to 2019-20) (Rs. Crores)
994
791
634 665
562 542
411 433
139
63 47 52 68 54 80 90
2012-13 2013-14 2014-15 2015-16 2016-17 2017-18 2018-19 2019-20
Exports Imports
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Table 13.4: Comparison of India’s Exports and Imports of Agrotech segment (Rs. Crores)
2012- 2013- 2014- 2015- 2016- 2017- 2018- 2019- Aggregate for
Period
13 14 15 16 17 18 19 20 eight years
Exports 791 994 634 562 411 433 542 665 5,033
y-o-y growth 26% -36% -11% -27% 5% 25% 23% -2%
Contribution
in total 1.7% 1.8% 1.1% 1.0% 0.7% 0.7% 0.7% 0.9% 1.0%
exports of TT
Imports 63 47 52 68 54 80 90 139 593
y-o-y growth -25% 10% 31% -20% 49% 12% 55% 12%
Contribution
in total 0.2% 0.1% 0.1% 0.2% 0.1% 0.2% 0.2% 0.3% 0.2%
imports of TT
728 946 582 494 358 353 453 526 4,440
Trade Status
Surplus Surplus Surplus Surplus Surplus Surplus Surplus Surplus Surplus
13.4.1.1 Overview
During the eight-year period under consideration, exports in the Agrotech segment totalled Rs. 5,033 Crores
as compared to total imports of Rs. 593 Crores. The exports have seen a decline in the past eight years from
Rs. 791 Crores to Rs. 665 Crores. This corresponds to a CAGR of -2%. During the same period, imports have
grown significantly from Rs. 63 Crores to Rs. 139 Crores at a CAGR of 12%.
13.4.1.2 Balance of Trade
India has been reporting a trade surplus in each of the eight years for Agrotech segment. For the year 2019-
20, India’s exports and imports for this segment were Rs. 665 Crores and Rs. 139 Crores respectively. For all
the eight years, the value of exports is 5 times or higher than the value of imports. However, due to declining
exports and increasing imports, the surplus has shrunk over the last eight years from Rs. 728 Crores in 2012-
13 to Rs. 526 Crores in 2019-20.
The contribution of Agrotech to overall exports of technical textiles during the period, ranges from 0.7% to
1.8% and for imports, it ranges from 0.1% to 0.3%.
13.4.1.3 Export distribution across items and countries
Table 13.5: Export share of top four Agrotech items in 2019-20 along with item description
ITC HS Code Item Description Share (%)
56081190 Made Up Fishing Nets: Other Than Nylon 38
Woven fabrics obtained from high tenacity yarn of nylon or other polyamides or of
54071019 32
polyesters: Unbleached: Other polyester fabrics
56081110 Made Up Fishing Nets: of Nylon 29
56075010 Nylon Fish Net Twine 1
Share of top four items 100
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Made Up Fishing Nets - other than Nylon (56081190) has the largest share with 38% of the value of exports
of this segment in 2019-20. It has had the highest export value over the last four years.
In exports, out of the four products, made up fishing nets and woven fabrics have had a total export share of
more than 60% in each of the past eight years.
Table 13.6: Five countries with largest imports of Indian Agrotech items (2019-20)
Country Total Value of Imports (Rs. Crores) Share in total exports (%)
Afghanistan 97 14.6
Chile 77 11.6
Norway 61 9.2
UK 50 7.5
UAE 46 6.9
Total 332 49.9
In terms of countries, Afghanistan was the biggest importer of Indian Agrotech goods in 2019-20 with a share
of 14.6% in India’s exports of Agrotech products. This share has increased from about 3% in 2012-13.
In 2012-13, UAE and Pakistan were the two largest importers of Indian Agrotech goods with about 22% and
20% share of India’s exports of Agrotech products. However, their combined import value has fallen to less
being than 8% of India’s Agrotech exports in 2019-20. Afghanistan, Chile, Norway, UK and UAE are other
countries that are large importers of Indian Agrotech goods.
Exports to top five countries constitute approximately 50% of the Agrotech exports. It shows that exports of
Agrotech products are concentrated to few countries and therefore the exports in this segment are relatively
more sensitive to country risks.
13.4.1.4 Import distribution across items and countries
Table 13.7: Import share of top three Agrotech items in 2019-20 along with item
description
56081110 Made Up Fishing Nets: of Nylon 39
56081190 Made Up Fishing Nets: Other Than Nylon 36
Woven fabrics obtained from high tenacity yarn of nylon or other
54071019 25
polyamides or of polyesters: Unbleached: Other polyester fabrics
Share of top three items 100
Made Up Fishing Nets of Nylon (56081110) has the largest import value in 2019-20 with a share of 39% of
Agrotech imports. Its share has increased from 24% in 2012-13 to 39% in 2019-20. It has been the most
imported product in Agrotech segment in the last seven years with a share as high as 65% in 2016-17. The
import share of Woven fabrics obtained from high tenacity yarn of nylon (54071019) reduced from a high of
59% in 2012-13, when it also was the most imported Agrotech product, to 25% in 2019-20.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Table 13.8: Five largest exporters of Agrotech items to India (2019-20)

Country Total Value of Exports (Rs. Crores) Share in total imports (%)
Bangladesh 45 32.5
Malaysia 40 28.9
China P RP 24 17.2
Thailand 16 11.5
USA 5 3.6
Total 131 93.7
The largest share in imports of Agrotech items in 2019-20 is from Bangladesh. The share has increased from
<0.1% in 2012-13 to ~32% in 2019-20. It was imports from China that had the largest share (more than
60%) in India’s imports of Agrotech goods in 2012-13. However, share of imports from China has declined to
less than 20% in 2019-20. Second largest share in India’s imports of Agrotech items is that from Malaysia at
approximately 29%. China, Thailand, and USA are the other large sources of imports of Agrotech goods for
India. Imports from top five countries are approximately 94%, highlighting India’s high dependence for
Agrotech imports on very few countries thus heightening supply risks.
13.4.2 Buildtech
The following section presents the international trade analysis of ten ITC HS codes corresponding to Buildtech
segment in India.
Figure 13.6: Value of Exports and Imports of Buildtech Segment (2012-13 to 2019-20) (Rs. Crores)
631
367
224 224
173 156 182
143 147 151
105 102 97 118 106 89
2012-13 2013-14 2014-15 2015-16 2016-17 2017-18 2018-19 2019-20
Exports Imports
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Table 13.9: Comparison of Exports and Imports of Buildtech segment (Rs. Crores)
2012- 2013- 2014- 2015- 2016- 2017- 2018- 2019- Aggregate for
Period
13 14 15 16 17 18 19 20 eight years
Exports 105 97 143 173 106 89 631 367 1,710
y-o-y growth -8% 48% 21% -39% -16% 608% -42% 19%
Contribution in
total exports of 0.2% 0.2% 0.2% 0.3% 0.2% 0.1% 0.8% 0.5% 0.3%
TT
Imports 102 118 147 156 151 182 224 224 1,303
y-o-y growth 16% 25% 6% -3% 21% 23% 0% 12%
Contribution in
total imports of 0.3% 0.4% 0.4% 0.4% 0.4% 0.4% 0.4% 0.4% 0.4%
TT
4 (21) (4) 17 (45) (93) 407 142 407
Trade Status
Surplus Deficit Deficit Surplus Deficit Deficit Surplus Surplus Surplus
13.4.2.1 Overview
In the eight-year period, Buildtech segment had total exports of Rs. 1,710 Crores whereas total imports in last
eight years were around Rs. 1,303 Crores. Total exports have seen a growth from Rs. 105 Crores to Rs. 367
Crores at a CAGR of 19% in the last eight years. In the same period, imports have grown from Rs. 102 Crores
to Rs. 224 Crores, at a CAGR of 12%.
In the last eight-year period, India has reported a trade deficit and surplus for four years each in the Buildtech
segments. India’s exports and imports for this segment were Rs. 367 Crores and Rs. 224 Crores respectively
in 2019-20. Due to higher growth in exports than imports, the surplus has increased over the last eight years
from Rs. 4 Crores in 2012-13 to Rs. 142 Crores in 2019-20.
The contribution of exports of Buildtech to the overall exports of technical textiles during the eight-year study
period rose from 0.2% to 0.8% and products share in imports increased from 0.3% to 0.4%.
Table 13.10: Export share of top five Buildtech items in 2019-20 along with item description
ITC HS Share
Item Description
Code (%)
Wallpaper and similar wall coverings, consisting of paper coated or covered, on the face side,
48142000 68
with a grained, embossed, coloured, design-printed or otherwise decorated layer of plastics
49111090 Trade advertising material, commercial catalogues, and the like: Other 23
63061200 Tarpaulins, Awnings and Sunblind etc.: of Synthetic Fibres 5
49111010 Trade Advertising Material, Commercial Catalogues and The Like: Posters, Printed 2
63061910 Jute Tarpaulins (Incl. DW tarpaulin) 1
Share of top five items 99
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Wallpaper and similar wall coverings (48142000) have largest export value in 2019-20 with a share of 68% in
Buildtech exports. The share of top five exported Buildtech products adds up to 99% in total Buildtech
exports. This indicates very high concentration of India’s exports in terms of items which have high export
value contribution in this segment.
Table 13.11: Five countries with largest imports of Indian Buildtech items (2019-20)
UAE 161 44.0
Malaysia 83 22.6
USA 58 15.7
Canada 7 1.8
Ethiopia 7 1.8
Total 315 86.0
UAE is the largest importer of Indian Buildtech products in 2019-20 with a 44% share in India’s Buildtech
exports. Its share has increased from approximately 4% in 2012-13 to more than 40% in recent years.
Malaysia, USA, Canada and Ethiopia are the other large importers of Indian Buildtech products. The combined
share of Exports to top five countries is 86% and this indicates that the exports in this segment have high
dependence on a few countries thereby they face high country risks.
Table 13.12: Import share of top five Buildtech items in 2019-20 along with item description
Wallpaper and similar wall coverings, consisting of paper coated or covered, on the
48142000 face side, with a grained, embossed, coloured, design-printed or otherwise 57
decorated layer of plastics
49111090 Trade advertising material, commercial catalogues and the like: Other 26
63062200 Tents: of Synthetic Fibres 6
49111010 Trade Advertising Material, Commercial Catalogues and The Like: Posters, Printed 4
59050090 Textile Wall Coverings: Other 3
Wallpaper and similar wall coverings (48142000) have the largest import value in 2019-20 with a share of
57%in Buildtech imports. Import share of top five Buildtech products is 96%. This shows that almost entire
value of imports is spent on only a few products.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Table 13.13: Five largest exporters of Buildtech items to India (2019-20)

China P RP 128 57.1
Korea RP 20 8.9
Germany 13 5.7
USA 10 4.3
Belgium 9 4.2
Total 180 80.2
India imported its largest share of Buildtech products from China in 2019-20 and share of Chinese imports has
increased from 27% to 57% over the last eight years. Share of Buildtech products imported from South Korea
has increased from 2% in 2012-13 to 9% in 2019-20. Germany, USA, and Belgium are the other large
exporters of Buildtech products to India. The share of imports from top five countries is around 80%, and it
highlights India’s high dependence on a very few countries regarding imports of Buildtech products.
13.4.3 Clothtech
The following section presents the international trade analysis of fifty-eight ITC HS codes corresponding to
Clothtech segment in India.
Figure 13.7: Value of Exports and Imports of Clothtech Segment (2012-13 to 2019-20) (Rs. Crores)
10,028
9,222 9,340
8,410 8,207 8,623
7,915
6,380
2,253 2,491
1,778 1,754 1,791 1,823 1,695 1,901
2012-13 2013-14 2014-15 2015-16 2016-17 2017-18 2018-19 2019-20
Exports Imports
Table 13.14: Comparison of Exports and Imports of Clothtech segment (Rs. Crores)
2012- 2013- 2014- 2015- 2016- 2017- 2018- 2019- Aggregate for
Period
13 14 15 16 17 18 19 20 eight years
Exports 6,380 8,410 7,915 8,207 8,623 9,222 10,028 9,340 68,127
y-o-y growth 32% -6% 4% 5% 7% 9% -7% 6%
Contribution in
total exports of 13.8% 15.1% 13.5% 14.0% 14.6% 14.6% 13.3% 12.9% 13.9%
TT
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Imports 1,778 1,754 1,791 1,823 1,695 1,901 2,253 2,491 15,485
y-o-y growth -1% 2% 2% -7% 12% 18% 11% 5%
Contribution in
total imports of 5.7% 5.3% 4.9% 4.7% 4.3% 4.1% 4.1% 4.8% 4.7%
TT
4,602 6,656 6,125 6,384 6,928 7,321 7,776 6,849 52,642
Trade Status
13.4.3.1 Overview
Clothtech segment has total exports worth Rs. 68,127 Crores and total imports of Rs. 15,485 Crores in the
eight-year period. In this period, Clothtech exports have grown from Rs. 6,380 Crores to Rs. 9,340 Crores at a
CAGR of 6% and imports have grown from Rs. 1,778 Crores to Rs. 2,491 Crores, at a CAGR of 5%.
Over the last eight years, India has reported trade surplus for all periods. For 2019-20, India’s exports and
imports for this segment were Rs. 9,340 Crores and Rs. 2,491 Crores respectively. Due to higher growth in
exports than imports, the surplus has increased over the last eight years from Rs. 4,602 Crores in 2012-13 to
Rs. 6,849 Crores in 2019-20.
Between 2013 and 2020, the year-to-year contribution of exports of Clothtech segment to overall exports of
technical textiles ranged from 13% to 14% and for imports, the contribution of Clothtech to total imports was
between 4% and 6%.
Table 13.15: Export share of top five Clothtech products in 2019-20 along with item description
Synthetic Filament Yarn (Other Than Sewing Thread), Not Put Up for Retail Sale,
54023300 54
Including Synthetic Monofilament of Less Than 67 Dacite: Textured Yarn: of Polyesters
Other made-up articles, including dress patterns: Other (Excluding Floorcloths,
63079090 11
Dishcloths, Dusters and Similar Cleaning Cloths and Life Jackets and Lifebelt): Other
54077200 Other woven fabrics, containing 85% or more by weight of synthetic filaments: Dyed 10
54077400 Other woven fabrics, containing 85% or more by weight of synthetic filaments: Printed 4
Other woven fabrics, containing 85% or more by weight of textured polyester filaments:
54075290 3
Dyed: Other
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Synthetic Filament Yarn (54023300) with a share of 54% has the largest contribution to exports of
Clothtech for the year 2019-20. Top five Clothtech products that are exported comprise share of 83% of
Clothtech exports.
Table 13.16: Five countries with largest imports of Indian Clothtech items (2019-20)
Turkey 1,518 16.3
Bangladesh PR 1,264 13.5
Brazil 918 9.8
USA 462 5.0
UAE 445 4.8
Total 4,607 49.3
Turkey is the largest importer of Indian Clothtech goods in 2019-20. The share of Turkey has increased from
around 14% in 2012-13 to more than 15% in 2019-20.
Bangladesh, Brazil, USA, and UAE are the other countries with large shares in exports of Indian Clothtech
goods. Exports to the top five importing countries are at approximately 49%. This implies that the exports of
Clothtech items are not concentrated too much on a few countries and so India’s exports of Clothtech items
are reasonably hedged against country risks.
Table 13.17: Import share of top five Clothtech items in 2019-20 along with item description
Other woven fabrics, containing 85% or more by weight of textured polyester filaments:
54075290 18
Dyed: Other
Other made-up articles, including dress patterns: Other (Excluding Floorcloths,
63079090 11
Dishcloths, Dusters and Similar Cleaning Cloths and Life Jackets and Life-Belt): Other
Other Narrow Woven Fabrics Containing by Weight 5% or More of Elastomeric Yarn/
58062000 9
Rubber Thread
96072000 Slide Fasteners and Parts Thereof: Parts 8
Synthetic Filament Yarn (Other Than Sewing Thread), Not Put Up for Retail Sale,
54023300 6
Including Synthetic Monofilament of Less Than 67 Dacite: Textured Yarn: of Polyesters
Other woven fabrics (54075290) has largest import value in 2019-20 with a share of 18%. Import share of top
five Clothtech products is more than 53%. This shows that the value of India’s import basket comprises of a
few products.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Table 13.18: Five largest exporters of Clothtech items to India (2019-20)

China P RP 1,211 48.6
Hong Kong 406 16.3
Korea RP 113 4.5
Indonesia 85 3.4
Taiwan 82 3.3
Total 1,897 76.2
India’s Clothtech imports sourced from China have the largest share in 2019-20. Its share in India’s import
basket for Clothtech goods has increased from 46% to 49% over the last eight years. Hong Kong’s share in
total imports of India has increased from less than 10% in 2012-13 to more than 16% in 2019-20.
Indonesia, and Taiwan are the other significant exporters of Clothtech goods to India. Imports from top five
countries comprise approximately 76% of total value of imports of Clothtech items into India.
13.4.4 Geotech
The following section presents the international trade analysis of five ITC HS codes that comprise Geotech
segment in India.
Figure 13.8: Value of Exports and Imports of Geotech Segment (2012-13 to 2019-20) (Rs. Crores)
605
481 493
367
303 311 325
247
213 210
139 171
101 115 118
67
2012-13 2013-14 2014-15 2015-16 2016-17 2017-18 2018-19 2019-20
Exports Imports
Table 13.19: Comparison of Exports and Imports of Geotech segment (Rs. Crores)
2012- 2013- 2014- 2015- 2016- 2017- 2018- 2019- Aggregate for
Period
13 14 15 16 17 18 19 20 eight years
Exports 67 101 115 118 139 171 210 247 1,168
y-o-y growth 50% 14% 3% 18% 22% 23% 18% 20%
Contribution in
total exports of 0.1% 0.2% 0.2% 0.2% 0.2% 0.3% 0.3% 0.3% 0.2%
TT
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Imports 213 303 311 325 367 481 605 493 3,099
y-o-y growth 42% 3% 4% 13% 31% 26% -18% 13%
Contribution in
total imports of 0.7% 0.9% 0.9% 0.8% 0.9% 1.0% 1.1% 1.0% 0.9%
TT
(146) (203) (196) (207) (228) (310) (394) (246) (1,931)
Trade Status
Deficit Deficit Deficit Deficit Deficit Deficit Deficit Deficit Deficit
13.4.4.1 Overview
Geotech segment has achieved a exports of Rs. 1,168 Crores as compared to imports of Rs. 3,099 Crores over
the entire period. Exports have seen a growth from Rs. 67 Crores to Rs. 247 Crores at a CAGR of 20% in the
past eight years. In the same period, imports have grown from Rs. 213 Crores to Rs. 493 Crores at a CAGR of
13%.
Over the last eight-year period, India has reported a trade deficit for all the years. For the year 2019-20,
India’s exports and imports for this segment were Rs. 247 Crores and Rs. 493 Crores respectively. Due to
lower absolute growth in exports than imports, the deficit has increased over last eight years from Rs. 146
Crores in 2012-13 to Rs. 246 Crores in 2019-20.
The year-wise contribution of exports of Geotech to overall exports of technical textiles during these eight
years has ranged from 0.1% - 0.3% and for imports it has been 0.7% - 1.1%.
Table 13.20: Export share of top three Geotech items in 2019-20 along with item description
Prepared binders for foundry moulds or cores; chemical products and preparations of
the chemical or allied industries (including those consisting of mixtures of natural
38244090 73
products), not elsewhere specified, or included: Prepared additives for cements,
mortars, or concretes: Other
Woven fabrics of other vegetable textile fibres; Woven fabrics of paper yarn: of coir
53110015 26
including log form and geotextiles
Woven Fabrics of Jute or of Other Textile Base Fibres of Heading 5303: Other: Other
53109099 1
(Excluding Product of Bleached, Dyed and Printed)
Share of top 3 items 100
Prepared binders for foundry moulds (54023300) have the largest export value in 2019-20 with a share of
73%.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Table 13.21: Five countries with largest imports of Indian Geotech items (2019-20)
Bangladesh PR 54 22.0
USA 33 13.4
Nepal 32 13.1
UAE 17 6.7
Australia 12 5.0
Total 149 60.3
Bangladesh is the largest importer of Indian Geotech goods in 2019-20 with a share of 22% of India’s
Geotech exports. Its share has increased from approximately 19% in 2012-13 to more than 22% in 2019-20.
Nepal, Bangladesh, Australia, USA, and UAE are the other significant importers of Indian Geotech goods
accounting for around 60% of India’s total exports in this segment.
Table 13.22: Import share of top 2 Geotech items in 2019-20 along with item description
38244090 95
products), not elsewhere specified, or included: Prepared additives for cements,
mortars or concretes: Other
Woven Fabrics of paper yarn: Other (Excluding Product of Unbleached, Bleached,
53110029 4
Dyed and Printed)
Share of top 2 items 100
Prepared binders for foundry moulds (38244090) have the largest share of 95% of the import value of
Geotech in 2019-20.
Table 13.23: Five largest exporters of Geotech items to India (2019-20)

Korea RP 190 38.5
USA 78 15.8
China P RP 49 10.0
Germany 45 9.1
Switzerland 23 4.7
Total 385 78.1
Exports from Korea RP (South Korea) had the largest share of imports of Geotech goods to India in 2019-20
and its share in India’s imports has increased from 12% to 38% over the last eight years. China ranks second
but its annual share has decreased from more than 30% in 2012-13 to around 10% in 2019-20. USA,
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Germany, and Switzerland are the other significant exporters of Geotech goods to India. Imports from top five
countries are approximately 78%.
13.4.5 Hometech
The following section presents international trade analysis of sixty two ITC HS codes corresponding to
Hometech segment in India.
Figure 13.9: Value of Exports and Imports of Hometech Segment (2012-13 to 2019-20) (Rs. Crores)
9,293 9,497
8,415 7,979
7,425 7,870
6,685
5,525
2,518 2,778 2,914

1,554 1,735 1,999 1,885
1,292
2012-13 2013-14 2014-15 2015-16 2016-17 2017-18 2018-19 2019-20
Exports Imports
Table 13.24: Comparison of Exports and Imports of Hometech segment (Rs. Crores)
2012- 2013- 2014- 2015- 2016- 2017- 2018- 2019- Aggregate for
Period
13 14 15 16 17 18 19 20 eight years
Exports 5,525 6,685 7,425 7,870 8,415 7,979 9,293 9,497 62,689
y-o-y growth 21% 11% 6% 7% -5% 16% 2% 8%
Contribution in
total exports of 12.0% 12.0% 12.7% 13.4% 14.3% 12.7% 12.3% 13.1% 12.8%
TT
Imports 1,292 1,554 1,735 1,999 1,885 2,518 2,778 2,914 16,673
y-o-y growth 20% 12% 15% -6% 34% 10% 5% 12%
Contribution in
total imports of 4.2% 4.7% 4.8% 5.1% 4.8% 5.4% 5.1% 5.6% 5.0%
TT
4,233 5,132 5,691 5,871 6,530 5,462 6,515 6,583 46,016
Trade Status
13.4.5.1 Overview
Over the last eight years, total exports of products in Hometech segment has been Rs. 62,689 Crores and
total imports have been Rs. 16,673 Crores. Total exports have seen a growth from Rs. 5,525 Crores to Rs.
9,497 Crores at a CAGR of 8% in the study period. During the same period, imports have grown from Rs.
1,292 Crores to Rs. 2,914 Crores at a CAGR of 12%.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Over the last eight years, India has reported a trade surplus in Hometech segment for all the years. India’s
exports and imports for 2019-20, for this segment were Rs. 9,497 Crores and Rs. 2,914 Crores respectively.
Due to the higher absolute growth in exports than imports, the surplus has increased over last eight years
from Rs. 4,233 Crores in 2012-13 to Rs. 6,583 Crores in 2019-20.
The contribution of exports of Hometech segment to the overall exports of technical textile ranges from 12%
to 13% and 4% to 6% for imports for the eight-year period under consideration.
Table 13.25: Export share of top five Hometech items in 2019-20 along with item description
54072090 Woven fabrics obtained from strip or the like: Other 13
Carpets and Other Textile Floor Coverings, Knotted, Whether Made Up: of Wool or Fine
57011000 13
Animal Hair
Carpets and Other Textile Floor Coverings, Knotted, Whether Made Up: of Other Textile
57019090 9
Materials: Other than cotton and coir
57023110 Other, of Pile Construction, Not Made Up: of Wool or Fine Animal Hair: Carpets 8
Other, of Pile Construction, Not Made Up: of Man-Made Textile Material: Carpets,
57023210 7
Carpeting and Rugs and The Like
Woven fabrics (54072090) and carpets have had the largest share of 13% in the exports for 2019-20. Top five
exporting products have had a share of 50% in the value. This suggests that in Hometech segment, the
export product range is quite diverse.
Table 13.26: Five countries with largest imports of Indian Hometech items (2019-20)
USA 3,713 39.1
Germany 620 6.5
China P RP 596 6.3
Afghanistan TIS 566 6.0
UK 460 4.8
Total 5,955 62.7
USA emerges as the largest importer of Indian Hometech goods in 2019-20 with a share of 39% in terms of
value of India’s exports for this segment. The share of USA has increased from approximately 33% in 2012-13
to 39%. Germany, China, Afghanistan, and UK are the other important importers of Indian Hometech
products.
Exports to top five importing countries are approximately 63% implying that exports of Hometech products
are moderately dependent on a few countries and therefore these are vulnerable to country risks.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Table 13.27: Import share of top five Hometech items in 2019-20 along with item description
59032090 Other Fabrics Impregnated Laminated Plated and Coated with Polyurethane 32
48114100 Gummed or adhesive paper and paperboard: Self-adhesive 16
Carpets and other textile floor coverings, tufted, whether made up: of nylon or other
57032090 13
polyamides: Other
Carpets and Other Textile Floor Coverings, Tufted, Whether Made Up: of other man-made
57033090 9
textile materials: Other
48182000 Handkerchiefs, cleaning or facial tissues and towels 3
Other Fabrics Impregnated Laminated Plated and Coated with Polyurethane (59032090) has largest import
value in 2019-20 with a share of 32% of Hometech imports. Import share of top five Hometech products is
72% of the value. This shows India’s high dependence on imports of only few products.
Table 13.28: Five largest exporters of Hometech items to India (2019-20)

China P RP 1,308 44.9
USA 219 7.5
Vietnam REP 197 6.8
Thailand 197 6.8
Korea RP 132 4.5
Total 2,053 70.5
China is the biggest exporter of Hometech goods to India in 2019-20; however, its annual share in India’s
Hometech imports has decreased from more than 50% in earlier years to around 45% in year 2019-20.
Other significant exporters of Hometech goods to India are USA, Vietnam, Thailand, and Korea. Value of
imports from top five countries is approximately 70%, highlighting India’s high import dependence on a few
countries.
13.4.6 Indutech
The following section presents the international trade analysis of 132 ITC HS codes corresponding to Indutech
segment in India.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Figure 13.10: Value of Exports and Imports of Indutech Segment (2012-13 to 2019-20) (Rs. Crores)
19,556 19,142
15,395
13,394
11,900
10,947
9,679 9,629 9,924
9,188
7,648 7,809 8,222 7,546 7,820
6,160
2012-13 2013-14 2014-15 2015-16 2016-17 2017-18 2018-19 2019-20
Exports Imports
Table 13.29: Comparison of Exports and Imports of Indutech segment (Rs. Crores)
2012- 2013- 2014- 2015- 2016- 2017- 2018- 2019- Aggregate for
Period
13 14 15 16 17 18 19 20 eight years
Exports 6,160 7,648 7,809 8,222 7,546 7,820 9,629 9,924 64,758
y-o-y growth 24% 2% 5% -8% 4% 23% 3% 7%
Contribution in
total exports of 13.3% 13.7% 13.3% 14.0% 12.8% 12.4% 12.8% 13.7% 13.2%
TT
Imports 9,188 9,679 10,947 11,900 13,394 15,395 19,556 19,142 109,202
y-o-y growth 5% 13% 9% 13% 15% 27% -2% 11%
Contribution in
total imports of 29.6% 29.3% 30.0% 30.4% 34.2% 33.2% 36.0% 37.1% 33.0%
TT
(3,028) (2,032) (3,138) (3,678) (5,848) (7,575) (9,927) (9,218) (44,444)
Trade Status
13.4.6.1 Overview
The aggregate exports of Indutech segment is Rs. 64,758 Crores and total imports is Rs. 109,202 Crores for
the eight-year period under consideration.
The value of Indutech exports has seen a growth from Rs. 6,160 Crores to Rs. 9,924 Crores over the last eight
years at a CAGR of 7%. In the same period, imports have grown from Rs. 9,188 Crores to Rs. 19,142 Crores,
at a CAGR of 11%.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
There has been a trade deficit in Indutech segment in each of the last eight years. For 2019-20, India’s
exports and imports for this segment were Rs. 9,924 Crores and Rs. 19,142 Crores respectively. Due to lower
growth in exports than imports, the deficit has increased over the last eight years from Rs. 3,028 Crores in
2012-13 to Rs. 9,218 Crores in 2019-20. The yearly share of exports of Indutech to the overall exports of
technical textile industry in the eight years ranged 13% to 14% and for imports it was 30% to 36%. Indutech
is the second largest segment in terms of India’s imports and exports of Technical Textiles.
Table 13.30: Export share of top five Indutech items in 2019-20 along with item description
Synthetic Staple Fibres, Not Carded, Combed or Otherwise Processed for
55032000 21
Spinning: of Polyesters
84219900 Filtering or Purifying Machinery and Apparatus, For Liquids or Gases: Parts 11
85340000 Printed circuits 9
56074900 Other cordage etc.: of polyethylene/ polypropylene 6
59031090 Other Fabrics Impregnated, Laminated Plated and Coated with PVC 5
Synthetic Staple Fibres (55032000) has the largest share (21%) of the value of exports in 2019-20. Top five
among the exported Indutech products have a value share of 52%. It shows low to moderate product
diversity in terms of export value contribution and therefore moderate product risk.
Table 13.31: Five countries with largest imports of Indian Indutech items (2019-20)
USA 2,257 22.7
UAE 436 4.4
Germany 359 3.6
Nepal 339 3.4
Total 3,829 38.6
USA is the largest importer of Indian Indutech products in 2019-20 with a share of 22.7% in India’s Indutech
exports. The annual share of USA has increased from approximately 15% in 2012-13 to more than 20% for
the period being studied. Bangladesh, UAE, Nepal, and Germany are the other destination countries for India’s
Indutech exports. Exports to top five countries is less than 40%, implying that the export of Indutech
products in terms of countries is well diversified and therefore the segment is relatively less dependent on
demand from a select few countries.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Table 13.32: Import share of top five Indutech items in 2019-20 along with item description
85340000 Printed circuits 23
84219900 Filtering or Purifying Machinery and Apparatus, For Liquids or Gases: Parts 14
Electric Accumulators, Including Separators Therefor, Whether Rectangular (Including
85079090 9
Square): Parts: Other
Synthetic Staple Fibres, Not Carded, Combed or Otherwise Processed for Spinning: of
55032000 5
Polyesters
59039090 Other Fabric Plated Laminated Coated Impregnated with Other Plastics 5
Printed circuits (85340000) had the largest import value among Indutech items in 2019-20 and had a share of
23% in India’s Indutech imports. The share of top five Indutech products in India’s imports of this segment is
56%, showing that only a few products comprise considerable share in terms of value. This has an effect of
increasing India’s product related buying risks.
Table 13.33: Five largest exporters of Indutech items to India (2019-20)

China P RP 9,002 47.0
Hong Kong 1,764 9.2
Korea RP 1,410 7.4
USA 919 4.8
Thailand 773 4.0
Total 13,867 72.4
China is the largest exporter of Indutech goods to India in 2019-20. Its share has remained stable at
approximately 47% of India’s imports in this segment for the last eight years. The share of India’s imports
from Hong Kong has increased from 2% in 2012-13 to 9% in 2019-20. Korea, USA, and Thailand are the
other big exporters of Indutech goods to India. The value of imports from top five countries is approximately
72% of India’s import basket of Indutech goods. This highlights India’s high dependence for Indutech imports
on a few countries and enhancing India’s buying risks associated with source countries.
13.4.7 Meditech
The following section presents the international trade analysis of twenty-seven ITC HS codes corresponding to
Meditech segment in India.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Figure 13.11: Value of Exports and Imports of Meditech Segment (2012-13 to 2019-20) (Rs. Crores)
3,066 3,090
2,410 2,491
2,081 2,212 2,107 2,178
1,834 1,761
1,298 1,269
958 1,002 1,068
868
2012-13 2013-14 2014-15 2015-16 2016-17 2017-18 2018-19 2019-20
Exports Imports
Table 13.34: Comparison of Export and Import Data of Meditech segment (Rs. Crores)
Period 2012- 2013- 2014- 2015- 2016- 2017- 2018- 2019- Aggregate for
13 14 15 16 17 18 19 20 eight years
Exports 868 958 1,002 1,068 1,269 1,761 2,107 2,178 11,210
y-o-y growth 10% 5% 7% 19% 39% 20% 3% 14%
Contribution in
total exports of 1.9% 1.7% 1.7% 1.8% 2.2% 2.8% 2.8% 3.0% 2.3%
TT
Imports 1,298 1,834 2,081 2,212 2,410 2,491 3,066 3,090 18,483
y-o-y growth 41% 13% 6% 9% 3% 23% 1% 13%
Contribution in
total imports of 4.2% 5.5% 5.7% 5.7% 6.2% 5.4% 5.6% 6.0% 5.6%
TT
Trade Status (430) (876) (1,079) (1,144) (1,142) (730) (959) (912) (7,273)
13.4.7.1 Overview
In the eight-year period, India’s Meditech segment has had total exports of Rs. 11,210 Crores and total
imports valued at Rs. 18,483 Crores.
Value of annual exports has seen a growth in last eight years from Rs. 868 Crores to Rs. 2,178 Crores at a
CAGR of 14%. In the same period, yearly imports have grown from Rs. 1,298 Crores to Rs. 3,090 Crores at a
CAGR of 13%.
The Meditech segment has reported a trade deficit for all the years in the eight-year period that has been
studied. India’s exports and imports in 2019-20, for this segment were Rs. 2,178 Crores and Rs. 3,090 Crores
_______________________________________________________________________________________________

___________________________________________________________________________________________________
respectively. Due to lower absolute growth in exports than imports, the annual trade deficit has increased
over last eight years from Rs. 430 Crores in 2012-13 to Rs. 912 Crores in 2019-20.
On an yearly basis, the contribution of exports of Meditech products to overall exports of technical textile was
2% to 3% and 4% to 6% for imports during the eight year period.
Table 13.35: Export share of top five Meditech items in 2019-20 along with item description
Panty hose, tights, stockings, socks, and other hosiery, including graduated compression
61152990 hosiery (for example, stockings for varicose veins) and footwear without applied soles, 14
knitted or crocheted: of other textile materials: Panty Hose and tights of Other Fibres
90213900 Other artificial parts of the body: Other 14
Articles of Apparel and Clothing Accessories (Including Gloves, Mittens and Mitts) for All
40151100 Purposes, or Vulcanised Rubber Other Than Hard Rubber: Surgical Gloves, Mittens & 13
Mitts
Textile Materials and Articles Thereof; Textile Fibres, Not Exceeding 5 Mm in Length
56012110 (Flock), Textile Dust and Mill Naps: Wadding; Other Articles of Cotton Wadding: 12
Absorbent Cotton Wool
30059040 Bandages Without Adhesive Layer 8
Panty hose, tights, stockings, socks, and other hosiery (61152990) has the largest share of 14% in Meditech
exports from India in 2019-20.
Top five among the exported products have a total share of 61%. This suggests that there is a moderate
concentration in terms of exported goods in value terms and diversification may be needed to reduce risks.
Table 13.36: Five countries with largest imports of Indian Meditech items (2019-20)
USA 198 9.1
Nepal 172 7.9
Spain 144 6.6
Germany 135 6.2
Poland 113 5.2
Total 761 35.0
USA is the largest importer of Indian Meditech products in 2019-20 with a share of 9.1% in India’s
Meditech exports. Its annual share in India’s exports has remained stable at 9% to 10% over the last eight
years. Nepal, Spain, Germany, and Poland are the other large importers from India in this segment.
Exports to top five countries are around 35%. This implies that the exports of Meditech items are well
diversified in terms of countries.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Table 13.37: Import share of top five Meditech items in 2019-20 along with item description
90213900 Other artificial parts of the body: Other 34
90213100 Artificial Joints 28
Articles of Apparel and Clothing Accessories (Including Gloves, Mittens and Mitts) For
40151100 All Purposes, or Vulcanised Rubber Other Than Hard Rubber: Surgical Gloves, Mittens 8
& Mitts
Sanitary towels (pads) and tampons, napkins and napkin liners for babies and similar
96190090 6
articles, of any material: Other
96190040 Clinical Diapers 4
Items classified under Other artificial parts of the body (90213900) have largest import value in 2019-20 with
a share of 34% of Meditech imports of India.
Import share of top five Meditech products is 80%. It shows a considerable part of India’s import bill of the
Meditech product is spent on a relatively few items in terms of value.
Table 13.38: Five largest exporters of Meditech items to India (2019-20)

USA 474 15.3
Belgium 408 13.2
China P RP 362 11.7
Switzerland 276 8.9
The Netherlands 259 8.4
Total 1,779 57.6
USA was the largest exporter of Meditech goods to India in 2019-20. However, its share has decreased from
more than 45% in 2012-13 to 15% in 2019-20. Belgium, China, Switzerland, and The Netherlands are the
other countries from where India sources its imports of Meditech items. The share of imports from top five
countries is approximately 58% of the total in this category. It underscores India’s dependence on only a few
countries for Meditech imports.
13.4.8 Mobiltech
The following section presents the international trade analysis of nineteen ITC HS codes corresponding to
Mobiltech segment in India.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Figure 13.12: Value of Exports and Imports of Mobiltech Segment (2012-13 to 2019-20) (Rs. Crores)
23,094
21,095
20,651
19,643
19,332
18,881
18,247
18,122
17,925
17,716
17,084
16,394
16,200
15,782
15,152
14,615
2012-13 2013-14 2014-15 2015-16 2016-17 2017-18 2018-19 2019-20
Exports Imports
Table 13.39: Comparison of Exports and Imports Data of Mobiltech segment (Rs. Crores)
2012- 2013- 2014- 2015- 2016- 2017- 2018- 2019- Aggregate for
Period
13 14 15 16 17 18 19 20 eight years
Exports 16,394 17,925 19,332 18,247 17,716 19,643 23,094 21,095 153,447
y-o-y growth 9% 8% -6% -3% 11% 18% -9% 4%
Contribution in
total exports of 35.5% 32.1% 33.0% 31.1% 30.0% 31.2% 30.6% 29.2% 31.4%
TT
Imports 14,615 15,152 16,200 17,084 15,782 18,881 20,651 18,122 136,487
y-o-y growth 4% 7% 5% -8% 20% 9% -12% 3%
Contribution in
total imports of 47.1% 45.8% 44.4% 43.6% 40.3% 40.7% 38.0% 35.1% 41.2%
TT
1,779 2,773 3,132 1,163 1,934 762 2,443 2,973 16,959
Trade Status
13.4.8.1 Overview
The Indian products of Mobiltech segment have an aggregate value of exports as Rs. 153,447 Crores and of
imports as Rs. 136,487 Crores for the eight-year period. Annual value of exports has seen a growth in last
eight years from Rs. 16,394 Crores to Rs. 21,095 Crores at a CAGR of 4%. During the same period, imports
have grown from a value of Rs. 14,615 Crores to Rs. 18,122 Crores, at a CAGR of 3%.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
There has been a trade surplus for Mobiltech segment in all of the last eight years. During 2019-20, India’s
exports and imports for this segment were Rs. 21,095 Crores and Rs. 18,122 Crores respectively. Due to
higher growth in exports than imports, the annual surplus has increased over the last eight years from Rs.
1,779 Crores in 2012-13 to Rs. 2,973 Crores in 2019-20. The annual percentage contribution of exports of
Mobiltech products to overall exports of technical textiles during eight years has ranged from 29% to 36%
and it has been between 35% and 47% for the imports. Mobiltech is the largest segment in Technical Textiles
industry of India in terms of both imports and exports based on the 449 ITC HS codes considered for analysis.
Table 13.40: Export share of top five Mobiltech items in 2019-20 along with item description
Parts and Accessories of The Motor Vehicles of Headings 8701 To 8705: Other parts and
87089900 83
accessories: Other
Parts and Accessories of The Motor Vehicles of Headings 8701 To 8705: Other Parts and
87082900 6
Accessories of Bodies (Including Cabs): Other
Seats (Other Than Those of Heading 9402), Whether or Not Convertible Into Beds, and
94019000 2
Parts Thereof: Parts
54071039 2
polyesters: Dyed: Other
Parts and accessories of the motor vehicles of headings 8701 to 8705 : Other parts and
87082100 2
accessories of bodies (including cabs) : Safety seat belts
Parts and Accessories of the Motor Vehicles (56081190) at a share of 83% comprise the largest export value
in 2019-20 in this segment. Top five among the exported products have a share of 95%. This shows high
concentration of products in terms of their contribution to value of exports.
Table 13.41: Five countries with largest imports of Indian Mobiltech items (2019-20)
USA 4,785 22.7
Turkey 1,249 5.9
Brazil 1,174 5.6
Mexico 1,154 5.5
Germany 1,118 5.3
Total 9,480 44.9
In terms of countries, USA was the largest importer of Indian Mobiltech goods in 2019-20 with a share of
22.7% in India’s Mobiltech exports. This share has increased from approximately 18% in 2012-13 to more
_______________________________________________________________________________________________

___________________________________________________________________________________________________
than 20% during 2019-20. Turkey, Brazil, Mexico, and Germany import a significantly large value of Indian
Mobiltech goods. Value of exports to top five countries is approximately 50% which indicates a moderate
degree of concentration in terms of countries to which Indian Mobiltech products are exported.
Table 13.42: Import share of top five Mobiltech items in 2019-20 along with item description
Parts and Accessories of The Motor Vehicles of Headings 8701 To 8705: Other parts and
87089900 57
accessories: Other
Parts and Accessories of The Motor Vehicles of Headings 8701 To 8705: Other Parts and
87082900 17
Accessories of Bodies (Including Cabs): Other
Seats (Other Than Those of Heading 9402), Whether Convertible into Beds, and Parts
94019000 7
Thereof: Parts
Parts and accessories of the motor vehicles of headings 8701 to 8705: Other parts and
87089500 6
accessories: Safety airbags with inflater system; parts thereof
59021090 Tyre cord fabric of nylon or other polyamides: Others 4
Parts and Accessories of Motor Vehicles (87089900) has had the largest import value in 2019-20 as it had a
share of 57%. Share of top five imported Mobiltech products is more than 90%. This shows high import
dependence of India on only a few Mobiltech products.
Table 13.43: Five largest exporters of Mobiltech items to India (2019-20)

China P RP 4,483 24.7
Korea RP 3,726 20.6
Germany 2,445 13.5
Thailand 1,441 8.0
Japan 1,214 6.7
Total 13,309 73.4
China was the biggest exporter of Mobiltech goods to India in 2019-20 and its share has increased from 15% in
2012-13 to approximately 25%. South Korea was the largest exporter of Mobiltech goods to India in 2012-13
and it had a share of more than 21% in India’s imports of Mobiltech items. However, share of Korean exports to
India has marginally declined to approximately 20%. The other countries whose exports of Mobiltech items to
India are significant are Germany, Thailand, and Japan. The value of imports from top five countries is
approximately 73%, which underlines India’s high dependence on a few countries for Mobiltech imports.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
13.4.9 Packtech
The following section presents the international trade analysis of 59 ITC HS codes corresponding to Packtech
segment in India.
Figure 13.13: Value of Exports and Imports of Packtech Segment (2012-13 to 2019-20) (Rs. Crores)
18,116
17,185
14,697
12,798 13,006 13,627
11,778
8,844
3,381 4,195 4,215

1,999 2,072 2,468 2,762 2,526
2012-13 2013-14 2014-15 2015-16 2016-17 2017-18 2018-19 2019-20
Exports Imports
Table 13.44: Comparison of Exports and Imports of Packtech segment (Rs. Crores)
2012- 2013- 2014- 2015- 2016- 2017- 2018- 2019- Aggregate for
Period
13 14 15 16 17 18 19 20 eight years
Exports 8,844 11,778 12,798 13,006 13,627 14,697 18,116 17,185 110,051
y-o-y growth 33% 9% 2% 5% 8% 23% -5% 10%

Contribution
in total 19.1% 21.1% 21.8% 22.2% 23.1% 23.3% 24.0% 23.8% 22.5%
exports of TT
Imports 1,999 2,072 2,468 2,762 2,526 3,381 4,195 4,215 23,617
y-o-y growth 4% 19% 12% -9% 34% 24% 0% 11%

Contribution
in total 6.4% 6.3% 6.8% 7.1% 6.4% 7.3% 7.7% 8.2% 7.1%
imports of TT
6,845 9,706 10,330 10,244 11,100 11,316 13,922 12,971 86,434
Trade Status
13.4.9.1 Overview
The exports from Packtech segment are Rs. 110,051 Crores and imports are Rs. 23,617 Crores in the eight-
year period being observed.
Yearly exports have seen a consistent and healthy growth from Rs. 8,844 Crores to Rs. 17,185 Crores at a
CAGR of 10%. During the same period, imports have also grown significantly from Rs. 1,999 Crores to Rs.
4,215 Crores, at a CAGR of 11%.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
India has been reporting a trade surplus in all the products under Packtech segment over the last eight years.
India’s Packtech exports and imports for the year 2019-20 were Rs. 17,185 Crores and Rs. 4,215 Crores
respectively. For all the eight years, the value of exports is more than four times of the value of imports and
the trade surplus has almost doubled from Rs. 6,845 Crores in 2012-13 to Rs. 12,971 Crores in 2019-20.
The yearly percentage contribution of exports of Packtech products to the overall exports of technical textile
has ranged from 19.1% to 24% and that of imports from 6.3% to 8.2% over the last eight-year period.
Table 13.45: Export share of top five Packtech items in 2019-20 along with item description
63053200 Sacks and Bags, Flexible Intermediate Bulk Containers: of Man Made Textile Materials 28
Articles of A Kind Normally Carried In The Pocket or In The Handbag: With Outer
42023120 13
Surface of Leather or of Composition Leather: Wallets and Purses, of Leather
42022190 With outer surface of leather or of composition leather: or of patent leather: other 9
With Outer Surface of Sheeting of Plastics or of Textile Materials: Handbags and

42022220 8
Shopping Bags, of Cotton
With Outer Surface of Leather or of Composition Leather: or of Patent Leather: Hand-
42022110 8
Bags For Ladies
Sacks and Bags of Man-made textile material (63053200) have largest share of 28% of Packtech export value
in 2019-20. This has also been the most exported product for the past eight years.
The top five Packtech products have a total export share between 65% and 70% in each of the last eight
years. The list of top exported products is consistent i.e. the same five products have featured in top five
exported products list over these eight years.
Table 13.46: Five countries with largest imports of Indian Packtech items (2019-20)
USA 4,376 25.5
Germany 1,724 10.0
UK 1,618 9.4
The Netherlands 995 5.8
Spain 957 5.6
Total 9,671 56.3
_______________________________________________________________________________________________

___________________________________________________________________________________________________
USA was the largest importer of Indian Packtech products in 2019-20 and exports to USA constituted 25.5%
of exports of Packtech products. The share of USA has increased from approximately 20% in 2012-13 to more
than 25% in 2019-20.
In 2012-13, UK was the second largest importer of Indian Packtech products comprising of 14% share.
However, its share of imports has fallen to less than 10% in 2019-20. Germany, The Netherlands and Spain
are the other significant export destinations for Indian Packtech products.
India’s exports to top five countries are at more than 55%. Exports of Packtech products to countries are
highly concentrated and hence this segment faces high business risk on the demand side.
Table 13.47: Import share of top five Packtech items in 2019-20 along with item description
42021250 With outer surface of plastic or of textile materials: Other Travel goods 23
42022290 With outer surface of sheeting of plastics or of textile materials: Other 10
Sacks and bags, of a kind used for the packing of goods: of jute or of other textile
63051040 8
bastfibres of heading 5303: Jute sacking bags
53101012 Unbleached: Containing 100% By Weight of Jute: Sacking Fabrics 8
42021290 With Outer Surface of Leather or of Composition Leather: or of Patent Leather: Other 7
Outer surface of plastic or of textile materials (42021250) has largest share of import value in 2019-20 at
23%. Its annual share has more than doubled from 9% in 2012-13 to 23% in 2019-20. It has remained one
of the top five Packtech importing products in each of the last eight years.
In contrast, there has been a reduction in the share of Outer Surface of Leather (42021290) among the
imported items from constituting a high of 26% in 2016-17, when it was also the largest imported Packtech
product to 7% in 2019-20.
The share of top five Packtech products has remained more than 55% of imports in this segment in each of
the past eight years. This shows that import expenditure is incurred only on a small number of products.
Table 13.48: Five largest exporters of Packtech items to India (2019-20)

China P RP 2,348 55.7
Nepal 390 9.2
Hong Kong 144 3.4
Singapore 101 2.4
Total 3,737 88.7
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Exports from China have the largest share in India’s imports of Packtech goods in 2019-20. India has
consistently imported more than half the total value of imported Packtech products from China for the past
eight years. The share of Chinese imports has increased from approximately 51% in 2012-13 to approximately
56% in 2019-20.
Bangladesh is the second largest source of imports of Packtech products for India. It has a share of
approximately 18%. Apart from China and Bangladesh, Nepal, Hong Kong, and Singapore are the other big
sources of Packtech imports for India. Imports from these top five countries add up to 89% of total imports of
Packtech products. This shows India’s high dependence for Packtech imports on a few select countries.
13.4.10 Protech
The following section presents the international trade analysis of 27 ITC HS codes corresponding to Protech
segment in India.
Figure 13.14: Value of Exports and Imports of Protech Segment (2012-13 to 2019-20) (Rs. Crores)
882
667
382 408
321 334 318 316 335 322
274
170 212
110 159
2012-13 2013-14 2014-15 2015-16 2016-17 2017-18 2018-19 2019-20
Exports Imports
Table 13.49: Comparison of Exports and Imports of Protech segment (Rs. Crores)
2012- 2013- 2014- 2015- 2016- 2017- 2018- 2019- Aggregate for
Period
13 14 15 16 17 18 19 20 eight years
Exports 382 321 334 318 316 408 667 882 3,629
y-o-y growth -16% 4% -5% -1% 29% 63% 32% 13%
Contribution in
total exports 0.8% 0.6% 0.6% 0.5% 0.5% 0.6% 0.9% 1.2% 0.7%
of TT
Imports 97 110 159 170 212 274 335 322 1,680
y-o-y growth 13% 44% 7% 24% 29% 22% -4% 19%
Contribution in
total imports 0.3% 0.3% 0.4% 0.4% 0.5% 0.6% 0.6% 0.6% 0.5%
of TT
285 211 176 148 104 134 332 560 1,950
Trade Status
_______________________________________________________________________________________________

___________________________________________________________________________________________________
13.4.10.1 Overview
Total exports of Protech segment products in the eight-year period are valued at Rs. 3,629 Crores whereas
total imports during this period are Rs. 1,680 Crores. Yearly exports have grown from Rs. 382 Crores to Rs.
882 Crores at a CAGR of 13%. During the same period, imports have also grown significantly from Rs. 97
Crores to Rs. 322 Crores at a CAGR of 19%.
India has been reporting a trade surplus in all the products under Protech segment for last eight years. India’s
exports and imports for this segment in 2019-20 were Rs. 882 Crores and Rs. 322 Crores respectively. Exports
have been higher than imports for each of the eight years. The trade surplus has almost doubled from Rs. 285
Crores in 2012-13 to Rs. 560 Crores in 2019-20 over the last eight years.
The percentage share of yearly exports of Protech products to overall exports of technical textile ranges from
0.8% to 1.2% and for imports, it ranges from 0.3% to 0.6%. The share of exports of Protech products in total
technical textiles exports has grown from 0.8% in 2012-13 to 1.2% in 2019-20. The share of imports has also
doubled from 0.3% in 2012-13 to 0.6% in 2019-20.
Table 13.50: Export share of top five Protech items in 2019-20 along with item description
Share
ITC HS Code Item Description
(%)
Men's or Boys' Overcoats, Carcoats, Cloaks, Anoraks (Including Ski-Jackets),
62019990 Windcheaters, Wind Jackets and Similar Articles Other Than Those of Heading 6203: of 18
Other Textile Materials: Other Than Silk
Men's or Boys' Personal Protective Garments, Not Knitted or Crocheted: Bullet Proof
62104010 16
Jackets, Bomb Disposal Jackets etc.
Garments, Made Up of Fabrics of Heading 5602, 5603, 5903, 5906 or 5907: of Fabrics of
62101000 15
Heading 5602 or 5603
Gloves, Mittens and Mitts, Knitted or Crocheted Impregnated, Coated or Covered with
61161000 12
Plastics or Rubber
63072090 Life Jackets & Life Belts Excluding Cotton 12
Men's or Boys' Overcoats (62019990) has largest export value in 2019-20 with a share of 18% in India’s
Protech exports. Its share has increased from a meagre 2% in 2012-13 to 18% in 2019-20. It has been
among top five Protech products exports since 2016-17.
Personal Protective Garments for Women & Girl's (62105000) and Women's or Girls’ Overcoats, etc.
(62021300, 62021200) saw a significant reduction in exports from over 25% in 2012-13 to 6% in 2019-20.
The top five Protech products have a total percentage share of more than 60% in exports in each of the past
eight years. The share of top five products has hovered between 63% to a high of 80% in the past eight
years. This shows that the product diversity is less in terms of export value contribution.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Table 13.51: Five countries with largest imports of Indian Protech items (2019-20)
USA 286 32.4
Philippines 115 13.1
France 56 6.3
Belgium 35 4.0
China P RP 32 3.7
Total 524 59.4
In terms of countries, USA is the biggest importer of Indian Protech goods in 2019-20. Exports to USA make
up for a share of 32.4% of India’s Protech exports. The share of USA has increased from around 20% in
2012-13 to more than 32% in the period under study. In 2012-13, Egypt was the second largest importer of
Indian Protech products with a share of around 9%. However, its share has fallen to less than 0.2% in 2019-
20. Along with USA, it is Philippines, France, Belgium, and China which are leading importers of Indian Protech
products. The value of India’s exports to these top five export destination countries is more than 55% and
that indicates India’s high dependence for export orders on these countries.
Table 13.52: Import share of top five Protech items in 2019-20 along with item description
ITC HS
Item Description Share (%)
Code
Articles of Apparel and Clothing Accessories (Including Gloves, Mittens and Mitts) For All
40159030 21
Purposes, or Vulcanised Rubber Other Than Hard Rubber: Other: Industrial Gloves
Gloves, Mittens and Mitts, Knitted or Crocheted Impregnated, Coated or Covered With Plastics
61161000 19
or Rubber
62104090 Other Men's or Boys' Personal Protective Garments Not Knitted or Crocheted 13
Garments, Made Up of Fabrics of Heading 5602, 5603, 5903, 5906 or 5907: of Fabrics of
62101000 11
Heading 5602 or 5603
Women's or Girls’ Overcoats, Raincoats, Car-Coats, Capes, Cloaks and Similar Articles: of man-
62021300 7
made fibres
Apparel and Clothing Accessories including Gloves, Mittens and Mitts (40159030) have largest share in value
of imports at 21% in 2019-20. The share of items under this code has remained high in the annual imports of
the segment and has ranged from 19% to 28% in the study period. This product has occupied the top slot
among the Protech products being imported by India in each of the years except in 2018-19, when it was the
second most imported product.
The share of Articles of Apparel and Clothing Accessories (39262029) in value of imports has reduced from
10% in 2013-14 to less than 5% in 2019-20.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
The share of top five Protech products in imports has always been more than 65% in each of the last eight
years. It shows that there are only a few select items of Protech imports which consume a major part of
expenditure on imports of products of this segment.
Table 13.53: Five largest exporters of Protech items to India (2019-20)

China P RP 154 47.8
Malaysia 34 10.6
Vietnam SOC REP 23 7.2
USA 18 5.7
Spain 17 5.3
Total 247 76.5
China was the largest exporter of Protech goods to India in 2019-20 with a significantly large share of more
than 47%. China’s share has increased from approximately 36% in 2012-13 to approximately 48%, and it has
always remained the largest among the exporters of Protech products to India.
Malaysia is the second largest exporter of Protech products to India with a share of around 11% of India’s
imports in this segment. The other significant sources of imports for India are USA, Vietnam, and Spain.
Imports from these top five countries are around 76% in value terms.
13.4.11 Sportech
The following section presents the international trade analysis of 46 ITC HS codes corresponding to Sportech
segment in India.
Figure 13.15: Value of Exports and Imports of Sportech Segment (2012-13 to 2019-20) (Rs. Crores)
1,149 1,165
948
881 838 861
832
780
698 713
647 599
602
453 445
360
2012-13 2013-14 2014-15 2015-16 2016-17 2017-18 2018-19 2019-20
Exports Imports
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Table 13.54: Comparison of Exports and Imports Data of Sportech segment (Rs. Crores)
Period 2012- 2013- 2014- 2015- 2016- 2017- 2018- 2019- Aggregate for
13 14 15 16 17 18 19 20 eight years
Exports 698 948 1,149 881 832 780 1,165 861 7,314
y-o-y growth 36% 21% -23% -6% -6% 49% -26% 3%
Contribution in
total exports of 1.5% 1.7% 2.0% 1.5% 1.4% 1.2% 1.5% 1.2% 1.5%
TT
Imports 360 453 602 647 713 838 599 445 4,658
y-o-y growth 26% 33% 7% 10% 18% -29% -26% 3%
Contribution in
total imports of 1.2% 1.4% 1.7% 1.7% 1.8% 1.8% 1.1% 0.9% 1.4%
TT
Trade Status 338 495 546 234 119 (59) 567 416 2,656
Surplus Surplus Surplus Surplus Surplus Deficit Surplus Surplus Surplus
13.4.11.1 Overview
The value of exports of products of Sportech segment for the eight-year period is Rs. 7,314 Crores and that of
imports is Rs. 4,658 Crores. Annual exports of this segment have seen a rise from Rs. 698 Crores to Rs. 861
Crores at a CAGR of 3%. During the same period, annual value of imports has grown from Rs. 360 Crores to
Rs. 445 Crores, at a CAGR of 3%.
India has reported trade surplus for all the years except in one year of the eight-year period under study.
India’s exports and imports in 2019-20 for this segment were Rs. 861 Crores and Rs. 445 Crores respectively.
Due to higher absolute growth in exports than imports, the surplus has increased from Rs. 338 Crores in
2012-13 to Rs. 416 Crores in 2019-20.
The percentage contribution of year-on-year exports of Sportech goods to the overall exports of technical
textiles industry in each year has ranged from 1% to 2% and contribution to imports has also been between
1% and 2%.
Table 13.55: Export share of top five Sportech items in 2019-20 along with item description
ITC HS
Item Description Share (%)
Code
Articles and Equipment For General Physical Exercise, Gymnastics, Athletics, Other
95069990 Sports (Including Table-Tennis) or Out-Door Games, Not Specified or Included 41
Elsewhere in this Chapter; Swimming Pools and Paddling Pools: Other: Other
95069960 Sports Nets 15
95069920 Leg Pads and Bats For Cricket 12
95066210 Articles and Equipment For General Physical Exercise, Gymnastics, Athletics, Other 8
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Sports (Including Table-Tennis) or Out-Door Games, Not Specified or Included

Elsewhere in This Chapter; Swimming Pools and Paddling Pools: Inflatable: Football
62111200 Swimwear: Women's or Girls' 4
Articles and Equipment for General Physical Exercise, Gymnastics, Athletics, Other Sports (95069990) have
largest value in 2019-20 with a share of 41% in India’s Sportech exports.
Top five exported products have a share of 81% of total value of Sportech exports which implies that exports
in this segment are concentrated among few products.
Table 13.56: Five countries with largest imports of Indian Sportech items (2019-20)
UK 180 20.9
USA 173 20.1
Australia 98 11.4
Germany 48 5.5
South Africa 30 3.5
Total 528 61.4
UK was the leading importer of Indian Sportech goods in 2019-20 and it had a share of 21% of India’s
exports. However, its share has decreased from 25% in 2012-13 to 21% in 2019-20. USA is the second
largest importer of Indian Sportech goods in 2019-20 with a share of 20%. The share of USA has increased
from 15% in 2012-13 to 20% in 2019-20.
Australia, Germany, and South Africa are also among the five leading importers of Indian Sportech products.
Total exports to top five countries are around 61% it shows that exports in Sportech segment are moderately
concentrated in terms of countries and therefore the exports in this segment are prone to country risks.
Table 13.57: Import share of top five Sportech items in 2019-20 along with item description
Articles and Equipment for General Physical Exercise, Gymnastics, Athletics, Other
95069990 Sports (Including Table-Tennis) or Out-Door Games, Not Specified or Included 32
Elsewhere In This Chapter; Swimming Pools and Paddling Pools: Other: Other
95065910 Other: Squash or Racquetball Badminton Rackets, Whether Strung 25
Other Tarpaulins, Awnings and Sunblind; Tents; Sails for Boats, Sailboards or Land craft;
63061990 7
Camping Goods
61124100 Women’s or Girls’ Swimwear: of Synthetic Fibre 5
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Women's or Girls' Overcoats, Car-Coats, Capes, Cloaks, Anoraks (Including Ski-Jackets),

62029310 Windcheaters, Wind-Jackets and Similar Articles, Other Than Those of Heading 6204: 5
Other: of Man-Made Fibres: Wind and Ski-Jackets, Windcheaters
Articles and Equipment for General Physical Exercise, Gymnastics, Athletics, Other Sports (95069990) have the
largest share of import value in 2019-20 at 32% of India’s Sportech imports. The share of imports of top five
Sportech products is 73% of the total in this category. It shows that imports of only a few products consume
a major share of import bill.
Table 13.58: Five largest exporters of Sportech items to India (2019-20)

China P RP 219 49.3
Japan 59 13.2
USA 22 4.9
Spain 16 3.5
Netherland 14 3.2
Total 329 74.0
China is the largest exporter of Sportech goods to India in 2019-20. China’s share has decreased from more
than 60% in 2012-13 to 49% in 2019-20. Japan, USA, Spain, and The Netherlands are other leading exporters
of Sportech goods to India. The import from top five countries constitutes around 74% of India’s imports in
this segment. It highlights that India is highly dependent on a few countries for its imports.
13.5 Summary of International Trade of India’s

technical textiles industry
Eight Technical Textiles segments – Packtech, Clothtech, Hometech, Mobiltech, Protech, Agrotech, Sportech,
and Buildtech have witnessed trade surplus during 2019-20. Indutech, Meditech, and Geotech segments have
witnessed deficit during 2019-20.
Table 13.59: Surplus and Deficit segments (2019-20)
Surplus Segments Deficit Segments
Agrotech Mobiltech Indutech

Buildtech Packtech Meditech
Clothtech Protech Geotech
Hometech Sportech
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Table 13.60: Fastest growing segments in terms of exports 2012-13 to 2019-20

(Rs. Crores)
Segment CAGR of Exports Exports in 2019-20 Exports in 2012-13
Geotech 20.5% 247 67
Buildtech 19.5% 367 105
Meditech 14.0% 2,178 868
Protech 12.7% 882 382
Packtech 10.0% 17,185 8,844
Hometech 8.0% 9,497 5,525
Indutech 7.0% 9,924 6,160
Clothtech 5.6% 9,340 6,380
Mobiltech 3.7% 21,095 16,394
Sportech 3.0% 861 698
Agrotech -2.4% 665 791
Total 6.6% 72,241 46,215
Indian technical textiles industry (based on 449 ITC HS codes considered here) has consistently witnessed
trade surplus over the last eight years from 2012-13 to 2019-20. Exports have grown for ten segments out of
total eleven segments in the eight-year period from 2012-13 to 2019-20. Exports have grown at around CAGR
of 7% and the surplus value has increased from Rs. 15,210 Crore in 2012-13 to Rs. 20,644 Cr in 2019-20.
Eight out of eleven segments have higher exports than imports in 2019-20. Mobiltech is the largest segment
in terms of export value. Exports in Geotech, Buildtech, Meditech and Protech segments are rising at relatively
faster rates (higher than CAGR of 10%) when compared to other segments. USA has emerged as the largest
destination for exports of Indian technical textile products and it is followed by Germany and UK at second
and third place respectively in terms of value of India’s exports to them.
Table 13.61: Fastest growing segments in terms of imports from 2012-13 to 2019-20 (Rs.
Crores)
Segment CAGR of Imports Imports in 2019-20 Imports in 2012-13
Protech 18.7% 322 97
Meditech 13.2% 3,090 1,298
Geotech 12.7% 493 213
Hometech 12.3% 2,914 1,292
Agrotech 12.0% 139 63
Buildtech 12.0% 224 102
Packtech 11.2% 4,215 1,999
Indutech 11.1% 19,142 9,188
Clothtech 4.9% 2,491 1,778
Mobiltech 3.1% 18,122 14,615
Sportech 3.1% 445 360
Total 7.5% 51,597 31,005
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Import of technical textile products by India has grown at a CAGR of about 7% from 2012-13 to 2019-20.
However, the absolute growth in value of imports has been lower than absolute growth of value of exports
thus translating into a growing trade surplus for India in technical textile products. Indutech is the largest
segment in terms of import value. Imports for Protech, Meditech, and Geotech items are increasing at
relatively faster rates as compared to that for other segments. The value of imports has increased for all
segments from 2012-12 to 2019-20. China is the largest exporter of technical textile products to India and
Korea and Germany are at second and third place respectively.
It can be seen that Geotech, Meditech and Protech segments have seen the highest growth during the eight-
year period both in terms of exports and imports indicating a high potential for growth in the coming years.
The items in Clothtech, Mobiltech and Sportech segments have seen a sluggish growth during the period
under study. The Indutech, Meditech and Geotech segments have witnessed trade deficits indicating a critical
need to scale up the domestic production for the items considered in these segments. The overall growth in
imports over the study period is higher than the growth in exports. It indicates a need to boost the exports
and create avenues for higher domestic output so as to also achieve import substitution a part of Atmanirbhar
Bharat (Self-reliant India).
13.6 Identification of 449 HSN codes for

Technical Textiles trade in India
13.6.1 Harmonized System of Nomenclature (HSN)
The Harmonized System (HS) is an internationally accepted standard for the classification of different products
for facilitating monitoring of international trade data. This classification is often used to identify the rate of tax
that needs to be levied and incentives which need to be provided for different products in the domestic and
international markets. The HS codes are known as HSN codes in India. The HSN coding system is used to
classify products and it consists of 8-digit codes along with their respective description. These codes are also
referred to as ITC-HS codes where ITC stands for Indian Trade Classification or Indian Tariff Code.
The ITC-HSN codes are classified into 21 sections and divided into a total of 99 chapters where each chapter
denotes a specific category of a product. These chapters are further categorised into headings, subheadings,
and tariff items. As an example, one 8-digit code is specified as follows:
Figure 13.16: Representation of 8-digit HSN code
Heading Specific product
63051010
Chapter number Subheading
_______________________________________________________________________________________________

___________________________________________________________________________________________________
13.6.2 HSN codes for technical textile products

The HSN codes contained in Chapters 50 to 63 (Section XI of ITC HS Code Classification) are specifically
assigned for textile and textile-based articles. Government of India has notified a list of 207 items specifically
as technical textile items to help boost the growth of technical textile industry in India. The classification helps
to monitor import and export data of technical textiles consistently and provide fiscal support to deserving
Indian enterprises in an objective manner.
However, it was observed by IIT Delhi that the current coding system consisting of 207 HSN codes needed
augmentation in order to be more representative of evolving range of technical textiles products. A committee
consisting of in-house experts was constituted by IIT to deliberate upon each of the 207 codes and to propose
a new and augmented scheme of codes.
13.6.3 Methodology used for revising HSN codes of technical textiles

13.6.3.1 Collection of ITC-HS codes
As a first step, identification was carried out for all the technical textile items from the exhaustive list of textile
items that was compiled for the purpose. It was observed that many items of technical textiles so identified
were not featured in the list of 207 HSN codes that Government of India had notified in January 2019 and
which is the current basis of classification. An effort was made to identify more products and their respective
ITC-HS codes which were appropriate for inclusion in a comprehensive list of technical textiles. Compilation of
532 ITC-HS codes was carried out using three different secondary databases:
• Government of India’s Initiatives in Technical Textiles & Notification of HSN Codes for Technical
Textiles by Ministry of Textiles, Government of India, 2019 (MOT)
• Baseline Survey of the technical textile industry in India by Office of the Textile Commissioner, 2016
• Enhancing Exports of Technical Textiles, EXIM Bank, 2018 (EXIM)
A total of 532 codes were earmarked for various technical textile products in these documents. In the
observations by the team of experts from IIT Delhi, about these 532 codes are summarised in the table
below. The EXIM report mentioned just the codes without corresponding descriptions, whereas the report of
the Ministry of Textiles and the Baseline survey mentioned the codes along with their respective descriptions.
Table 13.62: Identification of 532 codes from three different sources

Specifications Total Number
Common codes in all three sources 106
Unique codes in 207 HSN Code List (MOT) 16
Unique codes in Exim Report (EXIM) 32
Unique codes in Baseline Survey Report (BL) 257
Common codes in Baseline and EXIM Report 36
Common codes in 207 HSN Code List and EXIM Report 61
Common codes in 207 HSN Code List and Baseline Survey Report 24
Total 532
_______________________________________________________________________________________________

___________________________________________________________________________________________________
13.6.3.2 Rationalisation and revision of list of codes
The definitions of each of the 532 codes were carefully examined and discussed for their relevance in the
context of technical textiles. It was noted that 28 codes from the 532 codes should be removed from the ITC
(HS) 2017 chapters as these HSN codes undergo repeated revisions year after year. Therefore, these 28 ITC-
HS codes were eliminated. There were 56 HSN codes which also were eliminated by the team of experts as in
their view, those 56 codes did not represent items of technical textiles. There was One code assigned by
Ministry of Textiles that was included in the list.
The list of HSN codes that is being recommended by the team of experts from IIT Delhi comprises 449 codes
which include 207 codes already notified by Ministry of Textiles. The team at IIT Delhi team has analysed and
segregated all the proposed 449 codes into various segments of technical textiles. It is to be noted that as of
now, there no item that could be categorised as part of Oekotech segment.
Table 13.63: Total 449 HSN codes after revision
Specifications Total Number
Unique in HSN Code (207) 16
Unique codes given by Ministry of Textile (MT) 1
Unique codes in Exim Report (EXIM) 21
Unique codes in Baseline Survey (BL) 186
Common codes in Baseline and EXIM Report 34
Common codes in HSN and EXIM Report 61
Common codes in HSN and Baseline Report 24
Common codes in all 207, EXIM, BL 106
Total 449
Annexure 1 and Annexure 2 present the proposed list of 449 codes with their description and segment
classification.
Annexure 1 presents the codes and description of 207 items that have already been notified by the Ministry of
Textiles, Government of India as technical textiles. It also contains the segment classification of each of these
codes as per the experts from IIT Delhi and mentions all the differences that the proposed classification of
codes has, as compared to the classification of codes that has been notified by the Ministry of Textiles.
Additional 242 codes (449 proposed less 207 notified) that are proposed have been presented in Annexure 2
along with their individual segment classification as proposed by IIT Delhi.
_______________________________________________________________________________________________

14. International Trade of
Technical Textiles &
India’s contribution
The status of international trade of technical textile products and India’s position in it needs to be understood
to enable better positioning of India in the international market. An analysis of data of international market
has been carried out specifically for the products that are important from India’s standpoint. The trends in
exports of products reflect the market demand for the products and also help in identifying the countries that
are world leaders in the market for respective technical textile products.
This export analysis is expected to be of use to policy makers within the Government, policy influencers outside
the Government and business firms associated which are or desire to be a part of the technical textile industry.
14.1 Export Data

Export data of 63 key products of technical textiles using classification based on HS (Harmonized System)
Codes is presented in the tables below. The data has been sourced from WITS (World Integrated Trade
Solutions) Database provided by World Bank, UN (United Nations) Comtrade Database and ITC Trade Map.
The HS Codes used to extract data from these global databases are 6-digit codes; the first two digits indicate
the chapter the goods are classified in, the second two digits indicate the groupings within the chapter and
the last two digits further subgroup the product categories.
Table 14.1: Export data based on HS Codes of 63 key products (US$ Million)
% share of % share of
S. Name of key 2018 2019 2018 2019
HS Code India India
No. product (World) (World) (India) (India)
(2018) (2019)
1 Crop Covers* 392690 75,765.76 75,524.22 543.58 591.18 0.72% 0.78%
2 Fishing Nets 560811 891.16 1,410.67 58.93 63.55 6.61% 4.51%
3 Mulch Mats 530500 484.31 496.75 252.87 271.43 52.21% 54.64%
4 Shade Nets*’ 392690 75,765.76 75,524.22 543.58 591.18 0.72% 0.78%
560819 1,086.21 1,000.74 9.77 10.67 0.90% 1.07%
Architectural
5 392190 17,573.26 17,165.79 302.32 333.88 1.72% 1.95%
Membranes
Awnings and
6 761090 10,707.74 10,574.01 30.63 26.39 0.29% 0.25%
Canopy
7 Canvas Tarpaulin 630619 391.47 409.88 3.30 2.31 0.84% 0.56%
8 Scaffolding Nets’ 560819 1,086.21 1,000.74 9.77 10.67 0.90% 1.07%
9 Interlining 590390 4,358.74 4,328.01 46.34 65.59 1.06% 1.52%
_______________________________________________________________________________________________
Section 14: International trade of Technical Textiles & India’s contribution
___________________________________________________________________________________________________
2018 % share of % share of

S. Name of key 2018 2019 2019
HS Code India India
(2018) (2019)
Elastic Narrow
10 600290 136.99 116.73 6.12 4.20 4.47% 3.60%
Tape
580620 1,190.36 1,200.14 20.56 22.22 1.73% 1.85%
Labels and
11 580632 2,517.89 2,482.64 11.13 11.88 0.44% 0.48%
Badges”
Specialised and
12 Industrial Sewing 540110 1,249.30 1,216.86 11.80 11.01 0.94% 0.90%
Thread
540120 161.39 143.34 0.46 0.59 0.28% 0.41%
550810 721.01 699.61 7.25 6.23 1.01% 0.89%
550820 17.36 9.53 0.12 0.13 0.70% 1.33%
Umbrella Cloth (TT
13 540710 1,680.54 1,589.06 152.83 152.83 9.09% 9.62%
Component)
Zip Fastener Tape
14 960720 1,101.22 1,058.05 25.39 18.94 2.31% 1.79%
(TT Component)
15 Geogrids* 392690 75,765.76 75,524.22 543.58 591.18 0.72% 0.78%
Geomembranes
16 392010 18,562.44 17,349.99 71.10 81.34 0.38% 0.47%
and Geocomposites
17 Geotubes# 591190 3,025.12 3,013.69 20.90 21.98 0.69% 0.73%
392590 6,762.82 6,675.90 20.66 57.90 0.31% 0.87%
18 Blinds 392530 1,757.93 1,802.59 0.77 1.34 0.04% 0.07%
630392 3,875.59 4,024.94 7.75 7.05 0.20% 0.18%
Carpet Backing
19 531010 92.48 89.40 72.55 72.34 78.44% 80.91%
Cloth
Fibre Fill (Polyester
20 550390 684.81 745.60 0.03 0.17 0.00% 0.02%
Staple Fibre)
550320 5,017.11 4,382.74 321.03 295.01 6.40% 6.73%
Filter Fabric (HVAC
21 and Vacuum 591190 3,025.12 3,013.69 20.90 21.98 0.69% 0.73%
Cleaner)#
842139 26,333.73 30,003.91 132.21 129.84 0.50% 0.43%
22 Mosquito Nets 630492 1,096.20 1,053.89 733.75 729.10 66.94% 69.18%
Nonwoven
23 630710 2,417.77 2,460.94 38.08 33.22 1.57% 1.35%
household Wipes
Stuffed Toys (Plush
24 950300 46,212.50 51,870.99 101.62 131.50 0.22% 0.25%
Fabric)
Conveyor Belts (TT
25 401012 1,602.49 1,514.36 77.69 79.02 4.85% 5.22%
Component)
26 Decatising Cloth** 540710 1,501.77 1,427.50 147.35 152.83 9.81% 10.71%
Drive Belts (TT
27 848390 12,054.80 11,598.42 169.78 146.16 1.41% 1.26%
Component)
Industrial
28 560749 928.21 920.46 71.93 77.39 7.75% 8.41%
Webbings & Slings
Ropes and
29 560790 314.88 316.86 25.70 22.16 8.16% 6.99%
Cordages
30 Baby Diapers^ 961900 16,354.32 16,015.61 31.91 37.59 0.20% 0.23%
31 Ear Buds 630790 11,907.52 12,408.69 474.47 393.92 3.98% 3.17%
Extra Corporeal
32 901890 54,619.21 57,825.23 210.21 292.42 0.38% 0.51%
Devices##
Incontinence
33 961900 16,354.32 16,015.61 31.91 37.59 0.20% 0.23%
Diapers^
_______________________________________________________________________________________________
___________________________________________________________________________________________________
2018 % share of % share of

S. Name of key 2018 2019 2019
HS Code India India
(2018) (2019)
Orthopedic
34 901850 4,272.81 4,290.55 22.62 25.87 0.53% 0.60%
Implants^^
35 Sanitary Napkins^ 961900 16,354.32 16,015.61 31.91 37.59 0.20% 0.23%
Surgical
36 901850 4,272.81 4,290.55 22.62 25.87 0.53% 0.60%
Disposables^^
37 Vascular Grafts## 901890 54,619.21 57,825.23 210.21 292.42 0.38% 0.51%
38 Wipes 481890 1,469.67 1,586.85 4.85 5.86 0.33% 0.37%
39 Airbags~ 870899 93,054.82 86,880.29 2,769.67 2,633.07 2.98% 3.03%
Automotive Interior
40 391890 1,459.37 1,612.65 11.71 34.08 0.80% 2.11%
Carpets
41 Car Body Covers 630790 11,907.52 12,408.69 474.47 393.92 3.98% 3.17%
Headliners (TT
42 870899 93,054.82 86,880.29 2,769.67 2,633.07 2.98% 3.03%
Component)~
Insulation Felts (TT
43 681510 5,631.33 5,961.99 0.73 0.73 0.01% 0.01%
Component)
44 Seat Belt Webbing 580632 2,234.21 2,232.08 0.04 0.03 0.00% 0.00%
45 Seat Cover Fabrics 630499 469.40 351.54 0.10 0.13 0.02% 0.04%
46 Sun visors/sunblind 630619 367.89 388.82 0.08 0.08 0.02% 0.02%
47 Tyre Cord Fabric 590210 1,389.40 1,226.42 0.15 0.15 0.01% 0.01%
48 FIBC 630532 2,355.36 2,243.75 0.17 0.15 0.01% 0.01%
Jute Hessian and
49 630510 193.77 179.03 0.07 0.08 0.04% 0.04%
Sacks
50 Leno Bags 392329 5,132.61 5,141.74 0.03 0.02 0.00% 0.00%
Polyolefin Woven
51 392321 11,662.74 11,114.87 0.03 0.04 0.00% 0.00%
sacks
Tea Bags filter 482320,

52 889.49 865.87 0.47 0.39 0.05% 0.05%
paper 480540
Bullet Proof
53 621040 3,372.55 3,342.46 0.21 0.29 0.01% 0.01%
Jackets
Fire Retardant
54 621790 1,033.61 874.05 0.03 0.04 0.00% 0.00%
apparel
Fire Retardant
55 Fabrics for 590320 6,010.65 5,799.93 0.02 0.03 0.00% 0.00%
furnishings
High Visibility
56 630720 511.06 506.43 0.03 0.04 0.01% 0.01%
Clothing
57 Industrial Gloves 611699 185.08 175.87 0.02 0.03 0.01% 0.01%
58 Artificial Turf 391890 1,423.33 1,592.07 0.21 0.29 0.01% 0.02%
High Performance
59 Swimwear & 950619 425.48 435.37 0.00 0.01 0.00% 0.00%
Sportswear
Parachute
60 540710 1,444.63 1,345.71 2.77 2.63 0.19% 0.20%
Fabrics**
61 Sleeping Bags 940430 535.44 518.06 0.01 0.03 0.00% 0.01%
62 Sports Composites 950699 6,023.81 6,266.25 0.47 0.39 0.01% 0.01%
63 Tents 630629 332.76 324.24 2.77 2.63 0.83% 0.81%
Source: WITS Database, UN Comtrade Database, ITC trade map

Note: HS Code system comprises 6-digit codes and each such code represents broad range of products some of which may not be classified as technical
textiles
_______________________________________________________________________________________________
___________________________________________________________________________________________________
14.2 Major Exporting Countries

The export data of the three major exporter countries for each of the 63 key products is presented in the
table below. The data presented in the table indicates the relative dominance of various countries in the
international market for the 63 key products.
Table 14.2: Major exporting countries for 63 key products (US$ Million)
S. Name of HS Country 2018 2019 Country 2018 2019 Country 2018 2019
No. key product Code (Rank 1) (Rank 2) (Rank 3)
1 Crop Covers* 392690 China 12440.68 14379.86 Germany 9008.08 8769.56 EU 8396.1 8345.28
2 Fishing Nets 560811 China 325.45 350.08 India 58.93 63.55 Korea 51.62 64.59
3 Mulch Mats 530500 India 252.87 271.43 Sri Lanka 40.47 160.65 Brazil 40.07 44
4 Shade Nets*’ 392690 China 12440.68 14379.86 Germany 9008.08 8769.56 EU 8396.1 8345.28
560819 China 341.89 353.91 EU 103.29 109.52 Vietnam 95.62 94.16
5 Architectural 392190 Germany 2258.1 2082.46 EU 2050.22 1970.47 USA 1241.35 1250.55
Membranes
6 Awnings and 761090 China 2681.78 2816.76 Germany 1261.31 1325.12 EU 1201.62 1171.9
Canopy
7 Canvas 630619 China 206.65 205.42 Poland 35.58 34.34 EU 19.14 19.53
Tarpaulin
8 Scaffolding 560819 China 341.89 353.91 EU 103.29 109.52 Vietnam 95.62 94.16
Nets’
9 Interlining 590390 China 1046.12 1084.56 Germany 609.14 562.63 EU 543.41 536.73
10 Elastic 600290 China 32.46 31.39 Hong Kong 23.4 25.03 Italy 10.28 8.16
Narrow Tape
580620 China 429.47 443.36 Hong Kong 209.95 204.88 EU 80.86 74.43
11 Labels and 580632 China 686.54 738 Germany 230.36 224.39 EU 223.79 221.47
Badges”
12 Specialised 540110 China 274.81 298.43 Germany 189.11 170.22 EU 148.39 144.17
and Industrial
Sewing
Thread
540120 China 101.71 93.44 Germany 14.36 12.91 EU 11.39 9.47
550810 China 427.28 416.9 Hong Kong 56.35 53.5 EU 26.1 22.44
550820 China 2.04 2.37 EU 1.32 1.78 Spain 1.27 1.47
13 Umbrella 540710 Germany 173.88 171.63 EU 185.81 165.18 India 154.78 152.83
Cloth (TT
Component)
14 Zip Fastener 960720 China 292.79 312.45 Japan 217.94 173.4 Indonesia 86.1 85.72
Tape (TT
Component)
15 Geogrids* 392690 China 12440.68 14379.86 Germany 9008.08 8769.56 EU 8396.1 8345.28
16 Geomembran 392010 Germany 2340.06 2163.71 EU 1991.71 1906.18 China 1603.5 1784.99
es and
Geocomposit
es
17 Geotubes# 591190 USA 416.17 428.64 China 388.62 418.99 EU 393.06 418.99
392590 China 1150.19 1336.04 Germany 1099.93 1039.19 EU 681.66 633.85
18 Blinds 392530 China 483.88 452.34 Belgium 162.65 177.51 Mexico 151.05 165.66
630392 China 2152.38 2287.34 Mexico 385.48 384.9 Germany 211.93 225.44
19 Carpet 531010 India 77.56 72.34 China 2.21 4.51 Germany 2.77 2.51
Backing Cloth
20 Fibre Fill 550390 Japan 143.94 140.12 China 121.48 126.13 Korea 103.31 111.59
(Polyester
Staple Fibre)
550320 China 1237.36 1042.95 Korea 1130.83 881.41 Thailand 407.37 371.03
_______________________________________________________________________________________________
___________________________________________________________________________________________________
21 Filter Fabric 591190 USA 416.17 428.64 China 388.62 418.99 EU 393.06 418.99
(HVAC and
Vacuum
Cleaner)#
842139 EU 4007.85 5212.53 Germany 4541.01 4940.77 USA 3496.2 3549.33
22 Mosquito 630492 India 733.75 729.1 China 157.91 133.92 Germany 46.8 46.85
Nets
23 Nonwoven 630710 China 1075.09 1133.8 Pakistan 441.71 407.89 Germany 132.48 137.4
household
Wipes
24 Stuffed Toys 950300 China 25467.88 31342.5 Czech 2591.76 2691.96 Germany 2268.6 2270.01
(Plush Fabric) Republic
25 Conveyor 401012 China 476.4 463.19 Netherlands 150.62 138.69 USA 144.87 111.36
Belts (TT
Component)
26 Decatising 540710 Germany 174.2 171.72 India 147.35 152.83 USA 154.78 138.94
Cloth**
27 Drive Belts 848390 Germany 3022.86 2802.58 China 2406.34 2253.97 USA 1288.5 1341.42
(TT
Component)
28 Industrial 560749 China 247.26 240.31 India 71.93 77.39 Portugal 82.63 72.01
Webbings
and Slings
29 Ropes and 560790 China 79.65 84.68 Bangladesh 16.1 22.95 India 25.7 22.16
Cordages
30 Baby 961900 China 1801.59 2087.52 Germany 1519.15 1426.67 Poland 1059.9 1075.98
Diapers^
31 Ear Buds 630790 China 5132.26 5445.66 Vietnam 546.05 670.93 Germany 860.5 860.2
32 Extra 901890 USA 13195.29 14259.38 Germany 6827.51 6940.28 Netherlands 4364.0 5106.9
Corporeal
Devices##
33 Incontinence 961900 China 1801.59 2087.52 Germany 1519.15 1426.67 Poland 1059.9 1075.98
Diapers^
34 Orthopedic 901850 USA 1099.04 1112.02 Germany 777.53 844.07 Netherlands 303.85 322.87
Implants^^
35 Sanitary 961900 China 1801.59 2087.52 Germany 1519.15 1426.67 Poland 1059.9 1075.98
Napkins^
36 Surgical 901850 USA 1099.04 1112.02 Germany 777.53 844.07 Netherlands 303.85 322.87
Disposables^
^
37 Vascular 901890 USA 13195.29 14259.38 Germany 6827.51 6940.28 Netherlands 4364.0 5106.9
Grafts##
38 Wipes 481890 China 374.18 409.75 Germany 120.92 127.96 Netherlands 82.12 85.02
39 Airbags (TT 870899 USA 10078.03 9213.64 Korea, 8570.78 8681.57 Germany 9219.5 7979.54
Component) Republic of
~
40 Automotive 391890 China 892.92 1073.96 Germany 80.66 77.46 Taipei, 48.33 51.97
Interior Chinese
Carpets
41 Car Body 630790 China 5132.26 5445.66 Vietnam 546.05 670.93 Germany 860.5 860.2
Covers
42 Headliners 870899 USA 10078.03 9213.64 Korea, 8570.78 8681.57 Germany 9219.5 7979.54
(TT Republic of
Component)
~
43 Insulation 681510 USA 1260.37 1432.01 Germany 1067.43 1091.96 Japan 782.7 830.64
Felts (TT
Component)
44 Seat Belt 580632 China 686.54 738 Germany 230.36 224.39 USA 173.09 153.4
Webbing”
45 Seat Cover 630499 India 33.83 47.11 China 76.13 50.13 Czechia 30.57 36.25
Fabrics
46 Sun 630619 China 206.65 205.42 Poland 35.58 34.34 Germany 9.67 9.61
visors/sunblin
d
47 Tyre Cord 590210 China 439.58 380.83 Turkey 75.87 75 USA 71.51 44.97
Fabric
48 FIBC 630532 India 726.55 702.57 China 557.86 501.49 Turkey 212.65 184.72
_______________________________________________________________________________________________
___________________________________________________________________________________________________
49 Jute Hessian 630510 India 119.88 110.92 Pakistan 3.48 10.21 China 5.94 5.01
and Sacks
50 Leno Bags 392329 China 1232.63 1458.33 India 344.67 380.96 Italy 351.88 328.87
51 Polyolefin 392321 China 2928.07 2624.29 Germany 1048.9 987.58 USA 773.12 746.11
Woven sacks
52 Tea Bags 482320 Germany 221.82 206.41 Italy 144.65 135.56 UK 132.12 114.74
filter paper 480540
53 Bullet Proof 621040 China 1673.63 1560.05 Italy 199.44 184.6 Germany 184.36 206.99
Jackets
54 Fire 621790 Republic of 332.59 302.52 Spain 112.09 64.28 Italy 103.74 94.65
Retardant Korea
apparel
55 Fire 590320 China 2236.76 2310.09 Republic of 602.87 554.61 USA 511.28 457.43
Retardant Korea
Fabrics for
furnishings
56 High Visibility 630720 China 217.61 229.55 Poland 48.43 32.04 USA 27.24 24.22
Clothing
57 Industrial 611699 China 98.61 90.5 Pakistan 17.67 16.1 India 5.03 5.18
Gloves
58 Artificial Turf 391890 China 892.92 1073.96 Germany 80.93 77.93 USA 62.22 63.65
59 High 950619 China 128.34 144.64 France 32.69 34.58 Italy 24.64 22.02
Performance
Swimwear
and
Sportswear
60 Parachute 540710 Germany 173.88 171.63 India 147.04 152.83 USA 154.78 138.94
Fabrics**
61 Sleeping 940430 China 353.26 347.94 Germany 21.99 20.52 Spain 24.37 12.79
Bags
62 Sports 950699 China 2264.52 2560.53 USA 502.9 504.46 Germany 307.06 283.51
Composites
63 Tents 630629 China 114.89 115.75 Pakistan 55.16 46.32 USA 22.75 13.73
Source: WITS Database, UN Comtrade Database, ITC Trade Map, Analysis by IIT Delhi
China is the world’s leading exporter for 39 out 63 key products whereas USA dominates international export
market of eight key products and Germany is the foremost exporter in seven key products. India is the top
exporter for four key products as per the code based data extracted and analysed from sources that were
referred to conduct this analysis.
* Crop Covers, Shade Nets and Geogrids fall under the same code 392690 which contains items titled ‘other articles of plastics and articles of other materials of heading
3901 to 3914
’ Shade Nets and Scaffolding Nets fall under the same code 560819 which contains items titled ‘Knotted netting, nets not fishing of manmade textiles’
” Labels and Badges and Seat Belt Webbing fall under the same code 580632 which contains items titled ‘Woven fabric manmade fibres, less than 30 cm. wide’
# Geotubes and Filter fabric (HVAC and Vacuum Cleaner) fall under the same code 591190 which contains items titled ‘Textile products and articles, for technical uses,
specified in Note 7’
** Decatising Cloth and Parachute Fabrics fall under the same code 540710 which contains items titled ‘Woven fabrics obtained from high tenacity yarn of nylon or other
polyamides or of polyesters’
^ Baby Diapers, Incontinence Diapers and Sanitary Napkins fall under the same code 961900 which contains items titled ‘Sanitary towels (Pads) and tampons, napkins
and napkin liners for babies and similar articles of any material’
## Extra Corporeal Devices and Vascular Grafts fall under the same code 901890 which contains items titled ‘Other instruments and appliances’
^^ Orthopaedic Implants and Surgical Disposables fall under the same code 901850 which contains items titled ‘Other ophthalmic instruments and appliances’
~ Airbags and Headliners fall under the same code 870899 which contains items titled ‘Parts and accessories of closed die forged steel, for tractors, motor vehicles for
the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods
and special purpose motor vehicles
_______________________________________________________________________________________________
___________________________________________________________________________________________________
63 products were classified as key products of technical textiles on the basis of volume of their global trade as
well as their export potential for India. High trade potential was identified on the basis of reasonably high
demand and/or production capacity in India. China, the European Union, Germany, India and the USA are
major exporters of the identified key products. India’s share as a percentage of total world export is highest
for carpet backing cloth at 80.91%. India is also a major exporter of mosquito nets and mulch mats with a
share of 69.18% and 54.64% respectively in world exports. India has significant share in export of industrial
webbings and slings, decatising cloth, umbrella cloth, and ropes and cordages as well.
It is also observed that India’s share in exports for a large number of products is minuscule at less than 1%
contribution (Awnings and canopy, geomembranes, tyre cord fabric) for each; in some cases, it is nearly at
zero percent (High performance swimwear and seat belt webbing). This implies a huge untapped potential for
the Indian manufacturers for increasing their share in global market for technical textile products.
_______________________________________________________________________________________________
15. National and State
Policies and Schemes
15.1 Introduction
Ministry of Textiles (MoT), Government of India has been making efforts to facilitate the development of
country’s technical textiles industry. These efforts of the MoT have specially been aimed at supporting
manufacturers, speeding up the growth rate of the industry, promoting exports, reducing dependence on
imports, increasing the penetration level of the industry, inducing creativity, encouraging innovation,
diversifying the applications of technical textiles products, improving skill levels of the manpower and
attracting foreign investment into domestic technical textiles industry.
Many schemes and policies have been introduced in the last few years to give a fillip to the technical textiles
industry.
15.2 National level policies and schemes

Major national level policies and schemes for India’s technical textiles industry are summarised and presented
in the following table.
Table 15.1: National level policies and schemes for technical textile industry
S. Government Year of Implementation Total outlay Main aim(s) & objective(s)

No. initiative launch period (Rs. Crores)
1 Technology Up- 1999 1 April 1999 - 28 11,952 It is meant for entire textile industry
gradation Fund June 2010 (for RR-TUFS) including technical textiles.
Scheme (TUFS) & and Its objectives are: Leveraging investments
Revised- 28 April 2011 - in technology upgradation in the textile
Restructured sector to enable Indian industry to face
31 March 2017
Technology Up- global competition with focus on balanced
gradation Fund development across the value chain by
Scheme (RR- (a) addressing the issues of
TUFS) fragmentation and promoting forward
integration
(b) promoting investments with
smaller investment in MSME sectors;
(c) introduction of a Hire Purchase
Financing Model for weaving sector
_______________________________________________________________________________________________

___________________________________________________________________________________________________
2 Concessional 2002 It is in force - To reduce the final cost of technical textile

custom duty for products produced by Indian
specified technical manufacturers by imposing concessional
textiles machinery rate of 5% for the customs duty paid on
the listed machineries used for the
manufacturing of the technical textile
products
3 Scheme for 2005 Launched in 2005. - To provide the industry with world-class
Integrated Textile Latest extension infrastructure facilities in integrated textile
Parks (SITP) was from 1 April parks for setting up their textile units that
2017 to 31 March will meet international environmental and
2020 social standards
4 Scheme for 2007 2007-08 to 46.60 To encourage investment in the technical

growth and 2010-11 textiles industry
development of
technical textiles
(SGDTT)
5 Technology 2010 2010-11 to 200 Standardisation, creating common testing
Mission for 2014-15 facilities and indigenous development of
Technical Textiles Extended (2015- prototypes and resource centres with IT
(TMTT) 16 to 2016-17) infrastructure, market development
support for technical textiles
6 Scheme for 2012 2012-13 to 55 To encourage use of Agrotextiles in
promoting usage 2018-19 improving the agriculture, horticulture &
of Agrotextiles in floricultural produce of the north-eastern
northeast region states through creating demonstration set-
up
7 Scheme for 2014 2014-15 to 427 To promote the usage of geotextiles in
promoting usage 2018-19 infrastructure development in north-
of geotechnical Extended till eastern states
textiles in 2019-20
northeast region
8 Amended 2016 2015- 2016 to 17,822 Meant for textile industry as a whole.
Technology 2021-22 Promoting investment in technology
Upgradation Fund upgradation to enhance productivity,
Scheme for quality, employment, exports and import
textiles industry substitution in textiles industry. It will also
(ATUFS) indirectly promote investment in textile
machinery manufacturing.
9 Samarth (Scheme 2017 2017-18 to 1,300 Meant for textile industry as a whole.
For Capacity 2019-20 To provide demand-driven, placement-
Building In Textile oriented skilling programme to incentivise
Sector) the efforts of the industry in creating jobs
in the organised textile and related sectors
to promote skilling and skill up-gradation in
the traditional sectors.
To provide livelihood opportunity.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
10 Mandatory use of 2019 - - Deriving the benefits of technical textiles in

Technical Textiles various fields of applications. Currently
Ninety-Two (92) application areas have
been identified for mandatory use across
ten Central Ministries/Departments.
Mandatory use notifications have been
issued for 68 (sixty-eight) applications
11 Standardisation 2019 - - To improve the acceptability of Indian
technical textile products.
Bureau of Indian Standards (BIS) has
published IS standards for 377 technical
textiles products
12 Launch of 207 2019 - - To improve monitoring of import-export
HSN Codes for data of technical textiles and to provide
technical textiles well-directed financial support to exporters
of technical textiles and impose appropriate
duties on imports as per their proper
classification
13 Focus Product 2020 2020-21 to 2024- 10,683 To incentivise export of 40 Manmade fibre
Incentive Scheme 25 (MMF) apparel and 10 technical textile
(FPIS) products that have high export intensity or
employment potential
14 National Technical 2020 2020-21 to 2023- 1,480 To position the country as a global leader
Textiles Mission 24 (4 years) in technical textiles Market. To take
domestic market size of technical textiles
industry to US$ 40-50 Bn by the year 2024
with an average growth rate of 15-20%
per annum.
Source: Analysis by IIT Delhi
15.3 Details of the national policies and

schemes
The details of the policies and schemes introduced for the technical textiles industry have been presented as
follows:
15.3.1 Technology Upgradation Fund Scheme (TUFS)

This scheme was introduced in 1999 with an aim to leverage investments in technology upgradation by the
firms in textile industry as a whole. Under this scheme, the government provided funds to previously existing
as well as new manufacturing and processing units. The initial period of TUFS ended in 2004 and the scheme
was further extended till 2007.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Modified Technology Upgradation Fund Scheme (MTUFS)
MTUFS was introduced for a period of five years (from 2007 to 2012). According to the modification made in
the scheme, technical textiles manufacturing machinery was included under TUFS and was eligible for 5%
interest reimbursement. The machinery specified for technical textiles was also made eligible for 10% capital
subsidy in addition to 5% interest reimbursement.
MTUFS was discontinued between June 2010 and April 2011 to pave the way for ‘Restructured Technology
Upgradation Fund Scheme (RTUFS)’. Various subsidies amounting to Rs. 1,972 Crores were disbursed
between 2011 and 2013. RTUFS attracted an investment of Rs. 37,655 Crores (as per the details in the UID
application). Subsequently, the Government came out with the Revised Restructured Technology Upgradation
Fund Scheme (RRTUFS). Under the provisions of that scheme, the benefits provided to technical textiles
(including nonwoven) was 5% interest subsidy and 10% capital subsidy on specified machinery that was used
for manufacture of technical textiles.
Amended Technology Upgradation Fund Scheme (ATUFS)
The union cabinet approved a new scheme, ATUFS in January 2016. The Government has updated the
RRTUFS and brought it in alignment with its other initiatives such as ‘Make in India’ and ‘Zero-effect and Zero-
defect manufacturing’. The amendments have been made in terms of benefits and easing of claim procedures.
ATUFS provides a one-time capital subsidy for investments eligible benchmarked machinery in the
employment and technology-intensive segments of textile value chain with a view to substitute imports and
promote exports. The scheme is credit-linked and only those projects for technology upgradation that are
financed by term loan sanctioned by the lending agencies will be eligible for grant of benefits under it.
Under this scheme, there are two broad categories:
• Apparel, garment and technical textiles: For these sub-sectors, a 15% subsidy is being provided on
capital investment with a ceiling of Rs. 30 Crores for entrepreneurs over a period of five years.
• Remaining sub-sectors: For these sub-sectors, 10% subsidy is being provided with a ceiling of Rs. 20
Crores to entrepreneurs.
Budget provision of Rs.17,822 Crores has been approved for seven years from 2015-16 to 2021-22 to meet
the committed liabilities of Rs.12,671 Crores and Rs.5,151 Crores for existing and new cases respectively
under ATUFS. It is likely to attract an investment of Rs. 100,000 Crores and create more than 35 lakh jobs.
The scheme is implemented through web-based MIS system (i-TUFS) and subsidy is released directly to the
unit after installation of machinery and inspection. 100% joint physical inspection to verify purchase of
benchmarked machinery is done under the scheme.
As per the Annual report of 2020-21 of Ministry of Textiles, for the entire textile industry, 11107 UIDs have
been issued with project cost of Rs. 46,860.70 Crores and provisional subsidy value of Rs. 3,378.06 Crores
committed till 25.03.2021. Progress of ATUFS as regards only the technical textiles is given as under:
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Table 15.2: Progress of ATUFS as regards technical textiles

S. No. Segment Name No. of UID Project Subsidy Employment
Issued Cost (Rs. Amount
New Existing Total
Crores) (Rs.
Crores)
1 Technical Textiles 403 2669.83 246.08 6221 20315 26536
(15%)
The guideline of ATUFS has been revised on 02.08.2018 with a view to streamline the web-based process and
to make i-TUFS an end-to-end solution in implementation of the scheme.
Following steps have been taken towards simplification of the processes:
1. Automatic UID generation
2. Submission of documents through digital signature
3. Less number of documents
4. Simplification of procedure for machinery enlistment
5. Uploading Geo-tagged and time stamped photographs in i-TUFS software during Joint Inspection Team
(JIT) inspection
6. Subsidy released directly to beneficiary unit account through Public Financial Management System (PFMS)
7. Machine Identification Code engraved on machinery for identification
In addition, a number of steps have been taken to streamline the procedure and processing of JIT
reports/subsidy claims under ATUFS.
iTUFS
Ministry of Textiles has introduced an online portal iTUFS (Integrated Software for Technology Upgradation
Fund Scheme) in 2015, wherein applications for amended TUFS subsidy can be submitted. The portal helps in
bringing transparency to the entire subsidy claim process. Other than the online portal, there is also an iTUFS
mobile application, which is an android based app. The app can be used by any designated inspection officer
of the Textiles Commissioner of India. It helps to monitor the physical progress of installation and
commissioning of machines by beneficiaries so that they can prepare themselves for entitlement of the next
instalment of financial assistance under TUFS schemes.
The timelines for various TUFS schemes are summarised in the table below.
Table 15.3: Technology Upgradation Funds schemes (TUFS) through the years
Name of the Scheme Initial time-period Extended time-period
TUFS 1 April 1999 - 31 March 2004 1 April 2004 - 31 March 2007
Modified TUFS 1 April 2007 - 31 March 2012
Revised TUFS 28 April 2011 - 31 March 2012 1 April 2012 - 31 March 2013
Revised Restructured TUFS 1 April 2013 - 31 March 2017
Amended TUFS 13 January 2016 - 31 March 2022
Source: Analysis by IIT Delhi; TUFS was discontinued for 29 June 2010 – 27 April 2011
_______________________________________________________________________________________________

___________________________________________________________________________________________________
15.3.2 Scheme for Integrated Textile Parks (SITP)

The scheme was introduced in 2005 and its latest extension was from 2017 to 2020. The scheme provides for
financial support for setting up textiles parks across the country. These parks are planned to have world-class,
state-of-the-art infrastructure in textiles hubs. The main objective of the scheme is to increase investments,
boost entrepreneurship by providing financial support, generate employment opportunities and expand
exports in the textiles sector.
Under the provisions of this scheme, the proposed project cost covers common infrastructure and buildings for
production/support activities (including textiles machinery, textiles engineering, accessories, packaging)
depending on the needs of the Integrated Textiles Parks. The financial support from Government of India
amounts to 40% of the project cost subject to a maximum of Rs. 40 Crores. However, GOI support will be
provided at 90% of the project cost subject to a ceiling of Rs. 40 Crores for first two projects (each) in the
States of Arunachal Pradesh, Assam, Manipur, Meghalaya, Mizoram, Nagaland, Tripura, Sikkim, Himachal
Pradesh, Uttarakhand and UT of Ladakh and UT of Jammu & Kashmir.
The following five SITPs in the country are specifically dedicated to the technical textiles segment:
i. Goutham Budha Textiles Park Pvt. Ltd. (Andhra Pradesh)
ii. Great Indian Linen & Textiles Infra Structure Co. (P) Ltd. (Tamil Nadu)
iii. Mundra SEZ Integrated Textiles and Apparel Park Pvt. Ltd. (Gujarat)
iv. Pallavada Technical Textiles Park (Tamil Nadu)
v. Vraj Integrated Textiles Park Ltd. (Gujarat)
The detailed status of SITPs in technical textile industry has been presented in Section 22 of this report. It is
observed that three of the five SITPs are functional viz. Mundra SEZ Integrated Textiles and Apparel Park Pvt.
Ltd. (Gujarat), Pallavada Technical Textiles Park (Tamil Nadu) and Vraj Integrated Textiles Park Ltd. (Gujarat).
It is reported that Pallavada Technical Textiles Park (Tamil Nadu) has requested Government of India to
change its status from a textile park devoted to technical textiles to a textile park devoted to general textiles.
15.3.3 Scheme for Growth and Development of Technical Textiles

(SGDTT)
SGDTT was launched during the XI Five Year Plan in 2007-08 with the aim of encouraging investments in the
technical textiles industry. The total allocation of funds for the scheme was Rs.46.60 Crores and its tenure
ended in the year 2010-11. The scheme had three main components:
i. Baseline Survey
ii. Awareness Campaigns
iii. Creation of four Centres of Excellence (CoE)
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Table 15.4: List of four CoEs established initially under SGDTT

S.No. Location of CoE City, State Segment
1 South India Textiles Research Association (SITRA) Coimbatore, Tamilnadu Meditech

2 Synthetic & Art Silk Mills' Research Association (SASMIRA) Mumbai, Maharashtra Agrotech
3 Bombay Textiles Research Association (BTRA) Mumbai, Maharashtra Geotech
4 Northern India Textiles Research Association (NITRA) Ghaziabad, Uttar Pradesh Protech
15.3.4 Technology Mission for Technical Textiles (TMTT)

Ministry of Textiles, Government of India, launched Technology Mission for Technical Textiles (TMTT) in
December 2010 for a time period of five years (2010-11 to 2014-15) with a financial outlay of Rs. 200 Crores.
It was extended by another two years till 2016-17. This mission was aimed at eliminating the impediments
obstructing the production of technical textiles in the country and to fulfil the increasing demand for these in
the export as well as in domestic market. TMTT comprised of two Mini-Missions.
1. Mini Mission-I: It was aimed at standardisation, creation of common testing facilities, indigenous
development of prototypes and establishment of Resource Centres with adequate IT infrastructure in
eight Centres of Excellence (CoEs). It entailed creation of four new CoEs and upgradation of the
existing four CoEs which were set up under SGDTT. The four new CoEs setup under Mini Mission-I are
mentioned in table below:
Table 15.5: Four CoEs established under TMTT

S. No. Location of CoE City, State Segment
1 DKTE Society’s Textile and Engineering Institute Ichalkaranji, Maharashtra Nonwoven
2 PSG College of Technology Coimbatore, Tamil Nadu Indutech
Ahmedabad Textile Industry’s Research Association

3 Ahmedabad, Gujarat Composites
(ATIRA)
4 Wool Research Association (WRA) Thane, Maharashtra Sportech
2. Mini Mission-II: It focused on supporting development of domestic and export market for technical
textiles by providing assistance for business start-ups, contract research, buyer-seller meets and
participation in international exhibitions/seminars for technical textiles.
The following progress has been reported for the mission till FY 2018-19:
• 530 prototype samples have been developed
• 22147 persons have been trained in the industry
_______________________________________________________________________________________________

___________________________________________________________________________________________________
• 360 Technical consultancy assessments have been taken up
• 105 Detailed Project Reports (DPRs) have been prepared to set-up technical textiles units
• 654 training programmes/ seminars/ conferences have been organised
• 297 standards have been formulated
A schematic diagram regarding the two missions under TMTT is given in the figure below:
Figure 15.1: Details of TMTT scheme (Schematic representation)
TMTT
Mini-Mission - I Mini-Mission - II
Support for business start-up

Setting up four Upgrading existing
additional CoEs four CoEs
Funding support for organising
workshops
Social compliance through

DKTE, SITRA, standardisation, regulatory
Kolhapur Coimbatore measures
ATIRA, SASMIRA, Market development support for

Ahmedabad Mumbai marketing to bulk and institutional
buyers
PSG College of BTRA, Market development support for

Technology, Mumbai export sales
Coimbatore
Contract Research and
Development through
WRA, NITRA IITs/TRAs/Textiles Institutes
Thane
Scheme for promoting usage of

Agrotextiles in India (excluding
North Eastern States)
Focus Incubation Centres

As reported by the Ministry of Textiles, the scheme has met its objectives and it stands closed.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
15.3.5 Scheme for promoting usage of Agrotextiles in Northeast

Region
Ministry of Textiles launched a scheme in December 2012 which was aimed at encouraging the use of
Agrotextiles in Northeast (NE) region. The scheme strives to improve horticulture, sericulture and floricultural
produce in states of India’s NE Region by utilising Agrotextile products. The scheme got operationalised in
2013 and had a fund allocation of Rs. 55 Crores.
The scheme had two components:
i. Component I: Create awareness, set up demonstration centres and developing capacities

ii. Component II: Distribute Agrotextile kits in NE region
Progress of the scheme as of FY 2019-20:
• A total of 44 demonstration centres were set up in NE region to promote the usage of agro textiles
• Against a target of 1242 Agrotextiles kits, 1218 were distributed
• An amount of Rs. 48.23 Crores was utilised
Financial progress of the scheme is given in the table below.
Table 15.6: Financial progress of the scheme for promoting usage of Agrotextiles in North East
Region
Financial Year Fund Allocation (Rs. Crores) Expenditure (Rs. Crores)
2012-13 0.32 0.32

2013-14 Nil Nil
2014-15 9.00 9.00
2015-16 10.00 10.00
2016-17 14.99 14.99
2017-18 9.99 8.15
2018-19 7.60 0.00
2019-20 3.10 5.77
Total 55.00 48.23
Source: Ministry of Textiles, Government of India
The major benefits reported (as per Annual Report 2019-20, Ministry of Textiles, Government of India) are:
i. 30-45% water conservation was achieved

ii. There was two-fold increase in farm productivity
iii. 60% Increase in farmers’ income was reported
The scheme was closed in FY 2019-20.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
15.3.6 Scheme for promoting the usage of Geotechnical textiles in

the North East Region
Ministry of Textiles introduced a scheme for development of north-eastern states and give a boost to the use
of products of Geotextile segment of technical textiles. The scheme has a total outlay of Rs. 427 Crores and
was initially approved for implementation period of five years (from 2014-15 to 2018-19). The objective of the
scheme was to promote the use of Geotextiles for infrastructure development in country’s north-eastern
states. Sikkim, even though a north-eastern state is outside the footprint of this scheme.
The scheme had two major components:
i. Component 1 (Geotextiles Material application) is aimed at promoting the use of Geotextiles in the
northeastern region. Financial and technological support has been provided for infrastructure projects
covering hill-slope protection, road construction, riverbank erosion control and lining of water
reservoirs. The onsite installation accounted for Rs. 374 Crores of the total outlay of the scheme.
ii. Component 2 (Training and others) involves market studies, awareness campaigns, specification
formulation, design solutions, site inspection and techno-economic viability studies, training, on-site
testing and capacity building for skilling of workers in Geotextiles.
Under the scheme, 12 road projects, 11 water reservoir projects and 17 slope stabilisation projects were
undertaken. Life of infrastructure that has been created has been observed to have increased and
maintenance cost has reduced by as much as 50% in some cases. It was also found that there was a
prevention of water loss to the extent of 30%.
The financial progress of the scheme is presented in the following table:
Table 15.7: Financial progress of the scheme for promoting the usage of Geotechnical
textiles in the North East Region
Financial Year Fund Allocation (Rs. Crores) Expenditure (Rs. Crores)
2014-15 8.00 4.00

2015-16 15.00 3.63
2016-17 19.99 17.24
2017-18 19.82 19.82
2018-19 15.00 0.00
2019-20 10.01 1.42
Total 87.82 46.11
Source: Ministry of Textiles, Government of India
The scheme has been continued beyond its earlier conclusion date in order to meet the committed liability.
15.3.7 Launch of ITC Harmonized System of Nomenclature Code

(HSN Code)
Ministry of Textiles, Government of India has classified and assigned 207 HSN Codes to technical textiles. The
codes so assigned were notified in January 2019. Through the assignment of specific HSN codes to technical
_______________________________________________________________________________________________

___________________________________________________________________________________________________
textiles, India intends to correct anomalies arising out of misclassification and improve the monitoring of
imports and exports of technical textiles. It will also help in better targeting of financial and other relevant
incentives to technical textiles manufacturers and rationalise the levying of custom duties on imports. In
addition to these 207 codes, the Ministry is in the process of finalising more codes specific to technical textiles.
Table 15.8: Trade statistics for 207 technical textile items (Rs. Crores)
Period Exports Imports Trade Balance
(Exports-Imports)
2018-19 14,021.82 15,577.71 (1,555.89)
2019-20 12,924.32 14,290.58 (1366.26)
April-September 2020 6,539.84 4,772.33 1,767.51
15.3.8 Focus Product Incentive Scheme (FPIS)

Government of India has approved Production-Linked Incentive (PLI) Scheme for 10 key sectors for improving
India’s manufacturing capabilities and competitiveness in global markets as a part of ‘Aatmanirbhar Bharat’
initiative. Similarly, for Ministry of Textiles, a scheme called Focus Product Incentive Scheme (FPIS) has been
approved in November 2020. The scheme will emphasise the promotion of 40 Man-made fibre (MMF) apparel
and 10 technical textiles lines with the aim of creating 60-70 global champions. Financial outlay of Rs. 10,683
Crores over a period of five years has also been approved.
15.3.9 National Technical Textiles Mission

Ministry of Textiles, Government of India launched National Technical Textiles Mission in February 2020. This
mission aims at increasing the domestic use of technical textiles so as to take domestic market of technical
textiles industry to US$ 40-50 Bn by 2024 at an average growth rate of 15-20% per annum and also attaining
a leading position in the global market for technical textiles. The total outlay approved for this mission is Rs.
1,480 Crores (US$ 194 Million). The four-year implementation period of this mission will be from FY 2020-21
to 2023-24.
The Mission will have four main components which are presented in the Figure below:
Figure 15.2: Four Components of National Technical Textiles Mission
Component I Component II
Research, Innovation and Promotion and Market Development
Development
Domestic Market Size to US$40-50bn by 2024*
Rs. 1480
Crores
Component IV
Component III
Education, Training, Skill
Export Promotion
Development
Expand exports to Rs. 20,000 Crores. By 2021-22*
_______________________________________________________________________________________________

___________________________________________________________________________________________________
a. Component I: Its focus is on research, development and innovation and has an outlay of Rs. 1,000
Crores. It includes fundamental research as well as application-based research in Agrotech, Geotech,
Meditech, Mobiltech and Sportech. It will also focus on the development of bio-degradable technical
textiles and indigenous textiles machinery. The fundamental research activities will be based on ‘pooled
resource’ method and will be conducted in various Centre for Scientific & Industrial Research (CSIR)
laboratories, Indian Institute of Technology (IIT) and other scientific/industrial/ academic laboratories
of repute. Application based research will be conducted in CSIR, IIT, Research Design & Standards
Organisation (RDSO) of Indian Railways, Indian Council of Agricultural Research (ICAR), Defence
Research & Development Organisation (DRDO), National Aeronautical Laboratory (NAL), Indian Road
Research Institute (IRRI) and other such reputed laboratories.
b. Component II: Its focus is on the promotion and development of the technical textiles market via
collaborating at the international level, promoting investment and 'Make in India' initiatives. Indian
technical textiles segment is estimated at USD 16 Billion which is approximately 6% of the 250 billion
USD global technical textiles market. The penetration level of technical textiles is low in India varying
between 5-10% against the level of 30-70% in developed countries. The mission aims to expand the
current domestic market size from USD 16 Billion to USD 40-50 Billion by 2024, with an average growth
rate of 15-20% per annum.
c. Component III: Its focus is on promoting exports and for this an Export Promotion Council for technical
textiles will be set up. Technical textiles exports from India for FY 2018-19 are valued at Rs. 14,013
Crores and it is the aim of the mission to increase it to Rs. 20,000 Crores by FY 2021-22. In addition,
the mission aims to maintain the average annual growth rate of 10% till FY 2023-24.
d. Component IV: Its focus is on education, training and skill development in the Indian technical textiles
industry. It will promote technical education related to technical textiles and its application areas at
higher engineering and technology levels.
The Mission will focus on usage of technical textiles in various flagship missions, programmes of the country
including strategic sectors. Promotion of innovation amongst young engineering / technology/ science
standards and graduates will be taken up by the mission; alongwith creation of innovation and incubation
centres and promotion of ‘start-up’ and ‘ventures’. A sub-component of the research will focus on
development of bio-degradable technical textiles materials, particularly for agro-textiles, geo-textiles and
medical textiles. It will also develop suitable equipment for environmentally sustainable disposal of used
technical textiles, with emphasis on safe disposal of medical and hygiene wastes. A Mission Directorate in the
Ministry of Textiles headed by an eminent expert in the related field will be made operational.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
15.3.10 Concessional custom duty for specific technical textiles

machinery
Ministry of Textiles offers a concessional rate of 5% for the customs duty to be paid for major machinery
required for technical textiles manufacturing. The list of 26 types of machinery placed under concessional
customs duty has been notified.
15.3.11 Mandatory use of Technical Textiles

In order to promote domestic use of technical textiles and give a fillip to the market, Government of India has
identified ninety two application areas for mandatory use across ten Central Ministries/Departments. So far,
mandatory use notifications have been issued for sixty eight applications. The issuance of notification for
twenty four areas is under process.
15.3.12 Standardisation of technical textiles

The Bureau of Indian Standards (BIS) has published Indian Standards (IS) for 377 technical textiles products.
Details of the process and outcome of BIS efforts at establishing standards for technical textiles has been
provided in Section 16 of this report.
15.3.13 Samarth (Scheme for Capacity Building in Textile Sector)

Indian textile industry is facing scarcity of skilled workers. In order to address the scarcity, Government of
India has launched Scheme for Capacity Building in Textile Sector (SCBTS) and named it SAMARTH Scheme in
2017. The objectives of the scheme are to provide demand-driven, placement-oriented skilling programme to
incentivise the efforts of the industry in creating jobs in the organised textile and related sectors to promote
skilling and skill up-gradation in the traditional sectors through respective sectoral divisions/organisations of
Ministry of Textile and to provide livelihood to all sections of the society across the country. The scheme aims
to train 10 lakh persons over a period of 3 years (2017-20) and has an estimated budget of Rs. 1300 Crores.
The skilling programmes will be implemented through following implementing agencies:
• Textile Industry
• Institutions/Organisation of the Ministry of Textiles/State Governments having training infrastructure

and placement tie-ups with textile industry
• Reputed training institutions/ NGOs/ Societies/ Trusts/ Organisations/ Companies /Start Ups /
Entrepreneurs active in textile sector having placement tie-ups with textile industry
_______________________________________________________________________________________________

___________________________________________________________________________________________________
15.4 State level policies and schemes

15.4.1 Andhra Pradesh ‘Revised Policy for Textiles and Apparel
2018-23’
Andhra Pradesh launched its ‘Revised Policy for Textiles and Apparel 2018-23’ with the following aims:
(a) To convert the major portion of yarn produced in the State into Fabric and Garments within
the State
(b) To promote the State as a destination for global textile majors
This policy has the following targets:
(a) To attract new investments in value added textile activities worth Rs. 15,000 Crores by 2023
(b) Create employment for 2.5 lakh people by 2023
Benefits and incentives that the state government offers under this policy are as follows:
i. Land and infrastructure support: For new enterprises-

a. 50 percent of the land cost or 5 percent of the project cost, whichever is less
b. 25 percent of external infrastructure cost for standalone projects not allotted land in the
Industrial Parks/Textile Parks with maximum capping according to category
ii. Capital Subsidy: New /Expansion enterprises will be eligible for capital subsidy ranging from 10-20 percent
with upper limits of Rs. 15-50 Crores depending on the Fixed Capital Investment (FCI).
iii. Interest Subvention (Interest Subsidy): Interest subsidy @ 8% per annum for weaving units, preparatory
units, knitting units, processing units, technical textiles and integrated units (with investment matching.
Interest subsidy will be for 7 years with a moratorium of 2 years.
iv. Skill Support: One-time grant amounting to 50 percent of the training cost with an upper limit of Rs.
7500-10000 (depending on the scale of project) will be provided for the persons trained and employed in
the unit.
a. To boost skill development in the sector, financial assistance of 75 percent of the project cost
with a maximum limit of Rs. 4 Crores has been provided to training institutions for setting up
new training facilities in the state.
v. Power cost Reimbursement (Power Subsidy): Power cost reimbursement @ Rs.2/- per unit for a period of
5 years from the date of commencement of commercial production for value added activities such for
weaving units, preparatory units, knitting units, processing units, technical textiles, Integrated units (with
investment matching) in addition to standalone garmenting and apparel units.
vi. Employment Based Incentives: New /Expansion Enterprises engaged in the production for value added
activities such as for weaving units, preparatory units, knitting, processing units, technical textiles,
integrated units (with investment matching) in addition to standalone garmenting and apparel units and
generating employment for people of Andhra Pradesh domicile will be eligible for monthly employment
subsidy for the employees ranging from Rs. 1,000- Rs. 3,750 on the rolls, for a period of 5 years for all
activities in textile value chain (except ginning and spinning).
_______________________________________________________________________________________________

___________________________________________________________________________________________________
15.4.2 Bihar Industrial Investment Promotion Policy, 2016 for High

Priority Sectors
The Industrial Investment Promotion Policy 2016 has an integrated approach to industrial growth in the state
and gives investors coming to Bihar a wide range of benefits.
Provisions relevant to technical textiles in Bihar as per the policy are as follows:
• Technical textiles have been recognised as a high priority sector in this policy
• The Bihar Government has provided investment opportunities for twelve segments of technical textile
sector along with following two special segments:
o Multi-processing units for banana fibres and the production of goods such as fabric and other
items using banana fibres.
o Combined processing units for jute fibres and the manufacture of goods such as cloth and other
objects using jute fibres.
Package of incentives that are beneficial specially for technical textile units in Bihar
i. 10% return on interest guarantees or real interest rates on term loans (the lower one) will be available to
high priority sectors
ii. The total capital subsidy would be 50 % of the approved project bill. The upper limit of capital for this
subsidy is Rs. 20 Crores.
iii. The State Government shall provide a skill development subsidy of Rs. 20,000 per employee/ Bihar Skill
Development Mission (BSDM) rates whichever is lower.
iv. The State Government is now expanding the assistance of the Project Management Unit (PMU) to High
Priority Sector Units. These units will aim to promote investment plans and to support entrepreneurs and
developers in setting up their state units.
v. With an investment of Rs. 42.36 Crores, a jute park is being set up in Maranga, Purnea by registered SPV
M/s Punrasar Jute Park Ltd. The state government has given 44.30 acres of land as equity and Rs. 2
Crores as a grant under the PPP mode. Two units viz. M/s Tirupati Commodities Private Ltd. & M/s
Punrasar Jute Park Training Centre have been developed and are functional in the jute park at the
moment. Jute thread, jute twine, jute cloth and other jute items are produced by them.
15.4.3 Gujarat State Scheme for Assistance to Strengthen Specific

Sectors in the Textile Value Chain (2018-23) [Extension to Gujarat
Textile Policy, 2012]
Government of Gujarat announced ‘Gujarat Textile Policy 2012-17’ which was later extended till 2018. The
objective of the policy was to have an integrated approach to strengthen the (textile) value chain - “Farm to
Fibre to Fabric to Fashion to Foreign” (5 Fs), which will enhance sustainable growth of farmers and industry.
The policy provided for interest subsidy for value-addition chain from ginning to spinning, weaving,
_______________________________________________________________________________________________

___________________________________________________________________________________________________
processing, garment manufacturing and technology up-gradation. It provided power tariff concession for new
cotton spinning and weaving units; gave financial assistance to Skill Development Centres for textile industry
and offered financial assistance for technology acquisition for value chain. It provided for ‘Credit linked
Interest Subsidy in Technical Textiles’ with maximum interest subsidy at the rate of 6 percent per annum, for
a period of 5 (five) years or for the period of repayment of loan whichever is earlier. The scheme aimed to
benefit those units who had taken term loans from banks and financial institutions. There were extra benefits
provided by the Government of Gujarat for purchase of machinery (towards technology upgradation). These
benefits were over and above the benefits provided by Government of India under its Technology Upgradation
Scheme for textiles.
Government of Gujarat has implemented ‘Scheme for Assistance to Strengthen Specific Sectors in the Textile
Value Chain (2018-23). It provides for the following schemes for the textile industry as a whole:
Scheme I – Interest subsidy
The scheme will be known as financial assistance by way of credit linked interest subsidy for term loans taken
from scheduled commercial/cooperative banks recognised by the RBI by the enterprises for eligible activities
(New enterprise, expansion and forward/backward integration). The rate of interest subsidy is 6 percent for
MSMEs and varies from 4-6 percent for Non-MSME enterprises depending on the number of people for which
the employment is generated by the non-MSME enterprises. The maximum limit on amount of interest subsidy
is Rs. 20 Crores per annum and the maximum duration permitted is 5 years.
Scheme 2 – Power tariff subsidy
Enterprises will be eligible for a Power Tariff Subsidy for a status of new enterprise, expansion and
forward/backward integration. The subsidy will be Rs. 3 (for LT power connection) and Rs. 2 (for HT power
connection) for weaving activity. For enterprises engaged in non-weaving activities, the power subsidy will be
Rs. 2 per unit.
Scheme 3 – Assistance for environment and water conservation and environmental compliances
Assistance of 20 % of cost of machinery and equipment with a maximum of upto Rs. 30 lakhs can be
provided. It will be applicable separately in each case of energy conservation, water conservation and
environment compliance. Assistance of 50 percent of the fee paid towards energy audit up to maximum of
Rs. 1 Lakh can be provided separately in each case of audit.
Scheme 4 – Assistance for technology acquisition and upgradation
The enterprises acquiring new or improved or upgraded technology either indigenously or imported from
recognised R & D institutions or collaborators will be considered eligible under the scheme. Mere import of
machinery or technology will not be considered as technology acquisition or upgradation.
Financial assistance of up to 50 percent of the investment for technology acquisition/upgradation, with

maximum of Rs. 25 lakhs can be provided once during operative period of the scheme.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Scheme 5 – Support for establishing textile park
The textile park will be provided financial assistance @ 25 percent of capital expenditure for establishing
common facilities, common infrastructure and additional infrastructure (except land cost), maximum up to Rs.
15 crores. The developer of park will be eligible for reimbursement of 100 percent of stamp duty paid on
purchase of land required for the new park. The individual enterprise which is set up in the park will also be
eligible for reimbursement of 100 percent stamp duty paid on purchase of plot/shed in the textile park. ln
addition to this, the park will be provided financial assistance @ 25 percent of the cost of Hostel/ Dormitory
Housing within the park for a minimum of 100 workers domiciled in Gujarat, up to a maximum of Rs. 7.50
Crores, if prior approval is obtained for the same.
State government of Gujarat does not have a specially formulated, separate, exclusively focused provisions
and incentives for technical textiles despite having a good share in technical textile market.
Skill support
• The state Government shall provide assistance for setting up a training institution of up to 85 percent
of project cost subject to a maximum limit of Rs. 3 Crores.
Employment and employee related support
• To boost employment, the state Government shall provide 50 percent of the wages @ Rs. 4,000/- for
female employee and Rs. 3,200 for male employee per month for a period of 5 years as payroll
assistance to new enterprises. Moreover, an amendment has been passed for the provision of ramp-
up period of 6 months to applicants to ensure that the industry gets maximum benefit of payroll
assistance under the policy.
15.4.4 Haryana Textile Policy 2019

Haryana has announced its textile policy in 2019 according to which the following incentives are offered by
the State Government:
i. Financial assistance or common facilities in Textile parks: 50% of total project cost with maximum limit of
Rs. 10 Crores for establishing common infrastructure facilities. In addition, the park will be provided
financial assistance @50% of project cost of Hostel/ Dormitory Housing for domicile workers maximum up
to Rs. 2 Crores and @25% of the investment towards purchase of equipment and machinery (including
installation cost) upto a maximum of Rs. 20 Lakhs for skill training of work force.
ii. In case of technical textile projects located in textile parks, capital subsidy @ 15 %, maximum up to Rs.
25 lakhs shall be provided on the eligible capital investment for new/expansion/diversification/
modernisation projects to all categories of such units.
iii. To attract Anchor units, capital subsidy @25 percent is provided, up to a maximum of Rs. 50 Crores. For
technical textile projects, a subsidy of 15 percent is administered with a maximum of Rs. 25 Lakhs. Also, a
capital subsidy @15 percent of Gross FCI is granted to textile machine manufacturers.
iv. Interest subsidy @3 percent per annum is allowed for textile machine manufacturers.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
v. Collaboration with premier engineering and research institutes such as IIT Delhi for Skill
Training/Entrepreneurship and New Product Development in ‘Textiles’ including Technical textiles.
vi. State government shall collaborate with IIT Delhi for reserving 20 seats per quarter for entrepreneurs
from Haryana for skill training workshops at the Focus Incubation Centre for technical textiles.
vii. State government shall provide 50 percent sponsorship to these 20 entrepreneurs and in lieu of reserving
these 20 seats, government shall additionally adequately reimburse the recurring expenses incurred by
IIT Delhi for running this incubation centre subject to a ceiling.
viii. To encourage entrepreneurship in technical textiles, State Government shall reimburse 25% of cost (with
a cap of Rs. 15 Lakhs/product) incurred by the entrepreneur for any such new product development in
technical textile industry.
ix. There is a 100 percent reimbursement of stamp duty paid for units set up in certain specified locations.
x. An Employment Generation Subsidy is granted up to Rs. 36,000 per year per employee for 5 years or 20
percent of the SGST deposited, whichever is less , applicable to all categories of Textile enterprises.
15.4.5 J&K Start-up Policy 2018

J&K Industrial policy was announced in 2004 and it remained in force for next 10 years. In addition to this, a
special incentive package for industrial growth was announced by Government of India in June 2002 and it
was in force till June 2012. This tenure of the package was extended by GOI for further five years to carry on
till 2017. Textile (especially silk and wool sector) areas were identified among thrust areas in this package.
The ‘J&K State Industrial Policy 2016’ was announced with the objectives of strengthening the industry of J &
K and create employment opportunities to attract bigger and larger investment. The tenure of the policy was
envisaged at 10 years, i.e. up to 2026. In this policy, textile cluster was among the special focus activity. In
2018, J&K state administrative council (SAC) approved the ‘J&K Start-up Policy 2018’ to inspire young brains
to pursue innovation and entrepreneurship, empower start-ups and generate employment opportunities. In
this start-up policy, Textiles, Apparel & Fashion Technology have been identified as among the focus areas.
Apart from this, in the recent textile policy of 2020 by GOI two textile parks, J&K Textile Park and Kashmir
Wool & Silk Textile Park in Kathua were proposed for operations.
There has not been any specific mention of technical textiles in any of the policies of J&K so far.
15.4.6 Jharkhand Textile, Apparel and Footwear Policy 2016

The Jharkhand state proposed its ‘Industrial policy in 2001’ to accelerate the flow of investment for industrial
development in the state. Textile was identified as one of the thrust areas for industrial development. After
the tenure of this policy, the state announced ‘Industrial Policy 2012’ with the objective of achieving a higher
degree of development and reaching a higher rate of growth than had been envisaged earlier. In this policy,
textile and apparel was identified as one of the focus areas. There was no separate mention of technical
textiles in the policy. In the year 2016, the state government announced ‘Jharkhand Textile, Apparel and
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Footwear Policy 2016’ in which technical textile was identified as one of the major thrust areas for
development.
Objectives of Jharkhand Textile, Apparel and Footwear Policy 2016 that concern technical
textiles
• To pursue greater and sustainable development in the entire textile supply chain from fibre to finished
goods, to improve and expand the capability of Technological Textiles' critical value chain and other
supporting ancillary operations, including the development of textile machinery.
• To promote emerging technical textiles in key areas such as manufacturing, infrastructure and research
and development.
Special incentives for technical textiles
i. The policy states that, “Jharkhand has the potential to become a global manufacturing centre for
technical textiles and nonwovens, with a large domestic and foreign demand”.
ii. The Government of Jharkhand proposes that textile and apparel industrial units, including joint venture
projects, PPP mode, State Government owned etc. may be encouraged to obtain access to all existing
Government of India schemes such as Technology Up-gradation Fund Scheme (TUFS), Scheme for
Integrated Textile Parks (SITP), Scheme for Integrated Skill Development etc.
iii. The Government of Jharkhand supports the creation of textile parks of more than 75 acres in size. This
would facilitate textile units to meet international environmental and social standards.
iv. Centre of Excellence (CoE) for technical textiles: In a cooperative agreement with the Government of
Jharkhand, a Centre of Excellence for textiles will be established in the State as the lead partner, properly
supported by other institutions with the requisite capacity, such as the Bombay Textiles Research
Association (BTRA) or any leading technical institution of the State. The State Government will finance the
Centre of Excellence.
v. The CoE will assist manufacturers in the production of standard technical textile products and consumers
with the most scientific adoption of technical textile products. Quality certification would also be provided
by CoE for the production process and finished products.
vi. The CoE will help the units comply with international standards that would promote exports.
vii. An incubation centre will be created to catalyse new product creation, channel production and marketing
activities of technical textile products. The incubation centre will offer to start-up an expanded basket of
business strategies as well as a secure and appropriate venture space.
viii. Special attention shall be paid to the development of the fibres needed for technical textiles.
ix. The technical textile industry is eligible for a maximum capital subsidy rate of 15 per cent on machines
per person agency of Rs. 30 Crores.
x. Land and infrastructure support: 50 percent rebate is allowed on land cost that will be disbursed during 5
years in 10 equal installments.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
xi. Capital subsidy: To promote capital investment, a subsidy of 20 percent of investments made in fixed
capital with an upper limit of Rs. 50 Crores is provided.
xii. Interest subsidy: Interest subsidy of 7 percent p.a. or 50 percent of interest per annum with maximum
limit of Rs. 1 Crores for 7 years is allowed.
xiii. Power Cost Support: Support of @50 percent for 7 years on power tariff and 100 percent exemption on
electricity duty for 7 years is granted.
xiv. Stamp Duty Exemption: There is a 100 percent exemption on stamp duty.
xv. Skill support: To facilitate training and skill development, a one-time support of Rs. 13000 (per worker)
can be availed.
xvi. Quality certification and R&D support: To foster R&D, 50 percent of the cost incurred on BIS / ISO / SAS /
LEED subject to a limit of Rs. 10 lakhs is provided. 50 percent of the cost incurred on patent registration,
subject to a limit of Rs. 10 lakhs [of this, up to 4 lacs is on cost of patent filing etc.; the balance is
payable on final registration of the patent] can be availed.
xvii. Employment and employee related support: Employee-related support activities constitute an assistance
of 50 percent land cost with upper limit of 50 Lakhs for construction of dormitories.
15.4.7 Karnataka Textile and Garment Policy 2019-2024

Initially, the State Government came up with a ‘Textile policy 2004-09’ which was followed by a new ‘Textile
Policy 2008-13 (Suvarna Vastra Neethi 2008- 2013)’ in order to overcome the deficiencies noticed in the first
policy. Technical textiles and machinery manufacturing have been elaborately addressed in the Textile Policy
2008-13. However, once the policy period got over, the new Textile Policy- Nuthana Javali Neethi 2013-2018
was introduced and once again, the technical textile sector was elaborately mentioned and supported in the
policy. The facilitating initiatives meant for new technological textiles in crucial aspects such as manufacturing,
technology and research & development were the key focus areas of the strategy. After 2018, this policy has
once again got improvised and the State government has brought out a new textile and garment policy 2019-
24, with the aim to attract investment of ₹10,000 crore and generate five lakh jobs during the five-year
period. It has goal to raise the Karnataka textile manufacturing market to national and international levels.
The policy offers incentives to technical textile industry.
The objectives of New Textile Policy of Karnataka that specifically cover technical textiles are as
follows:
• To achieve higher and sustainable growth in the technical textile industry through capital infusion,
transfer of technology, world-class infrastructure and upgradation of skills.
• To give a boost to the local economy and develop a comprehensive textile ecosystem in the
technological textile sector within the province.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Major strategy to upgrade technical textile industry which are a part of the policy are mentioned as follows:
• To give special focus on technical textiles as a thrust sector of the policy to create an internationally
competitive textile industry in the State.
• To make Karnataka into a major production hub and a net exporter of technical textiles. At present,
the units from Karnataka have a noticeable performance in Buildtech, Clothtech, Hometech and
Meditech with Mysore, Hassan and Bangalore emerging as leading areas for growth in technical textile
sector.
Specific support activities envisaged for technical textile sector are as follows:
• Set up a centre of excellence for technical textile in association with academia at a cost of Rs. 10
Crores
• Provide assistance for developing standards for TT products and for promoting more user adoption for
TT products
• Provide encouragement to R&D projects in technical textile sector especially for that related to raw
materials i.e. fibre manufacturing process
• Support the technical textiles industry through new product development, channelised production and
market development strategies
• Spread information about technical textile products through awareness programmes, sample
exhibition, publications and technical know-how to the manufacturers and users of the technical
textile products
Following incentive schemes are also proposed for the technical textile industry:
Table 15.9: Classification of zones in Karnataka
Zones Definitions
Zone 1 Entire Kalyana Karnataka Region, (Bidar, Kalburgi, Yadagiri, Raichur, Koppal and Bellary)
Zone 2 All areas other than Municipal Corporations, District Headquarters in Non Kalyana Karnataka Region
Zone 3 All Municipal Corporations and District Headquarters in Non Kalyana Karnataka Region
Zone 4 Bangalore Urban District
Table 15.10: Incentive schemes for technical textile sector as part of Karnataka State textile
policy
S. No. Nature of Incentive Specific provisions for incentive for technical textile sector
1 Capital Subsidy 30, 25 and 20% are allowed for MSME Enterprise of zone 1, 2 and 3
25, 20 and 15% are allowed for Large Enterprise of zone 1, 2 and 3
2 Power Subsidy Reimbursement of cost of power paid at Rs. 1.0 per unit for a period of 5 years
for both Large and MSME Enterprise located in zone 1,2 and 3
3 Setting up Centre of Grant of Rs. 10 Crores to be funded by the State Government
Excellence for Textiles /
Technical Textiles
_______________________________________________________________________________________________

___________________________________________________________________________________________________
4 Interest Subsidy 5% per annum on term loans for the first 5 years for units in zone 1, 2 and 3
5 EPF and ESI Subsidy 75% reimbursement of employer’s contribution of wage rate per employee per
month for all the new units for 5 years for MSMEs located in zone 1,2 and 3
6 Effluent Treatment Plant 50% capital subsidy or Rs. 5 Crores whichever is less for establishment of
Effluent Treatment Plants (ETPs)
Covering an assistance up to 50 percent, a maximum limit of Rs. 50,000 for
Energy Audit/Water Audit/Environmental Compliance (applicable in each case
separately) is commissioned.
7 Stamp Duty Exemption Stamp duty exemption and concessional registration charges rate of Rs. 1.00
and Concessional per Rs. 1000
Registration Charges
8 Common Infrastructure One time grant support for development of common infrastructure for
for Greenfield Textile Greenfield Parks with individual promoters up to 25% of the project cost or Rs.
Park 25 Crores per Park project, whichever is less (in all zones)
One time grant support for the development of common infrastructure for
Greenfield Parks of up to 40% of the project cost or Rs. 40.00 Crores per Park
project, whichever is less (for SPV)
9 Common Infrastructure One time grant support for the development of common infrastructure for
for Brown Field Textile Brownfield Parks of up to 40% of the project cost or Rs. 12.00 Crores per Park
Park project, whichever is less (for SPV)
Source: Unique Exim, Karnataka- Textile Policy 2020-25 for MSME and Large Industries
15.4.8 Kerala Industrial & Commercial Policy 2018

Kerala does not have a separate textile policy for the State. The provisions related to garment sector of textile
was covered in the State’s ‘Industrial & Commercial Policy 2015’. There was no mention of technical textiles in
that policy. The industrial policy of the State has been improvised into ‘Kerala Industrial & Commercial Policy
2018’ with the aim of transforming Kerala into a vibrant investment destination through eco-friendly and
sustainable economic development with creation of employment opportunities with reasonable wages. In this
policy, some aspects of technical textile sector, textile park, Geotech, industrial textile etc. have found a
mention alongside the incentives that are offered by the State government. Some of the initiatives to be taken
under the policy are as follows:
i. The Government of Kerala has proposed construction of industrial parks, which among others also have
textile units so that the growth of textile industry can be encouraged in the State.
ii. Skills learning centres will be set up for the textile industry in conjunction with the industrial parks.
iii. Current efforts will be multiplied to promote the use of coir as Geotextiles for better conservation of water
and soil. It is expected to increase its demand in the local market through MNREGA projects. If this is
successful, the entire coir procured by Coirfed will be converted into coir net and used for water and soil
conservation. This will be included under employment guarantee scheme and will help in meeting the aim
of Hairtha Keralam (Green Kerala). The State Government intends to invest more efforts towards market
development of coir fibres for Geotextile application.
iv. To promote infrastructure development, a fixed capital rebate of Rs.20-30 Lakhs depending on the
category of unit for investment in land, building, plant & machinery, electrification, essential office
equipment, pollution control devices and other fixed assets is facilitated.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
15.4.9 Madhya Pradesh Industrial Promotion Policy 2014

Madhya Pradesh does not have a separate, exclusive textile policy. However, it has special provisions for
textile & apparel industry as a part of the Industrial Promotion Policy 2014. The support and incentives offered
are as follows:
One Time Incentive offered
i. Land Cost Rebate: The state provides 50-75 percent rebate on land premium depending on the land size
requirement for MPIDC developed industrial areas. The percentage of rebate is dependent on the area of
the land parcel. Rebate at the rate of 50 percent is also offered if undeveloped land parcel is leased from
MPIDC - 50% rebate will be offered upto a fixed land size on the basis of investment categories given in
the policy. Maximum area admissible for rebate is up-to 40 Hectares.
ii. Development Fee related subsidy for Apparel/Garment Sector: 50% discount in the development fee is
offered in case of taking lease land in the industrial area.
iii. Fixed Capital Rebate: Investment Promotion Assistance (IPA): A tax delinked investment assistance is
offered to large scale industries ranging from 40% to 10% of investment in plant and machinery with
minimum investment of Rs. 10 Crores.
iv. Stamp Duty Exemption: Investor can demand for Stamp duty Exemption under customised package for
Mega projects.
v. Reimbursement of Patent Charges: The state offers reimbursement of Patent Charges @100 percent upto
an amount of Rs. 5 lakhs per patent.
vi. Infrastructure Development Subsidy: The state gives infrastructure development subsidy @50 percent
with a maximum limit of Rs. 1.00 Crores each for developing water, power and roads infrastructure for
private or undeveloped Govt. land.
vii. Assistance for Plant & Machinery, Expansion/Diversification/Technical Upgradation: The state offers VAT
plus CST reimbursement with maximum ceiling of 100% investment in plant and machinery approved
under TUFS scheme.
viii. On the technology upgradation front, support is available as per different categories of upgradation.
ix. SGST Reimbursement: MP has a tax-delinked policy. Investor can demand for SGST reimbursement under
customised package for Mega projects.
x. Skill Development/ Training Incentive: Investor can demand for skill development/training incentive under
customised package for Mega projects.
xi. Interest Cost Subvention/ Interest Subsidy for textile units: State offers to new textile units, an interest
subsidy @2 percent for 5 years on term loan taken for TUFS approved P&M subject to ceiling of maximum
Rs. 5 crores is offered for units having investment upto Rs. 25 Crores in Plant & Machinery. Whereas for
existing stand-alone textile units with an investment of more than Rs. 25 Crores, the interest subsidy is
available @ 5% for 5 years on term loan taken for TUFS approved P&M. The Composite textile unit with
an investment more than Rs. 25 crores can avail interest subsidy @ 7% for 5 years on term loan taken for
TUFS approved P&M.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
xii. Power Tariff Rebate/Power Subsidy as well as Electricity Duty rebate: Investors can demand for power
tariff rebate as well as electricity duty rebate under customised package for Mega projects.
15.4.10 Maharashtra Textile Policy 2018-23

Keeping the concept of ‘Fibre to Fashion’ in mind, the Government of Maharashtra declared its ‘Textile Policy
2011-17’ in January 2012. Technical textiles were not part of that policy. After this, the new ‘Textile Strategy
of the State for 2018-23’ was unveiled. It is aimed at creating 10 lakh new jobs in the next 5 years and
doubling the income of farmers by 2022. In this strategy document, technical textile is specifically mentioned
as an emerging sector. As part of the strategy, 9% of project cost up to Rs. 25 Lakhs is provided to technical
textile parks set up under Scheme for Integrated Textile Parks (SITP).
Objectives of ‘Textile Strategy of the State for 2018-23’ which are relevant to technical textiles
• Place special emphasis on emerging technical textiles market
• Provide textile industry with latest technological expertise established by institutions such as IITs,
SASMIRA and WRA, which are actively involved in the textile industry's research & development.
Benefits and incentives for technical textiles units
i. Capital Subsidy: The capital subsidy for technical textiles units is presented in the table below.
Table 15.11: Subsidies offered to various categories of technical textile production units
Subsidy to units in Technical Textile (% of eligible amount)
General category 40
SC/ST/Minority Category 45
Production of yarn, cloth and other non-conventional yarn 10

products
Additional Capital 20
Units having Forward/Backward Integration 5
In addition to above, a 10 percent capital subsidy for textile units located in areas of Vidharbha, Marathwada and North Maharashtra
can be availed.
ii. Interest subsidy: The state government will extend an interest subsidy so as to curtail effective
rate of interest payable by eligible units to 0-2 percent.
iii. Power Cost Support: Power subsidy of Rs. 2.00 to Rs. 3.77 per unit shall be administered
depending on the category of enterprise. All eligible news units in Group C, D and D+ areas and
No-Industry district(s) and Naxalism affected areas will be exempted from the payment of
electricity duty during the eligible time period, not exceeding 15 years.
iv. Technology upgradation support: A 5 percent subsidy on capital equipment for technology
upgradation, subject to a maximum of Rs. 25 lakhs is extended. In addition, a 25 percent
_______________________________________________________________________________________________

___________________________________________________________________________________________________
subsidy on capital equipment for cleaner production measures subject to a limit to Rs. 5 lakhs
can also be availed.
v. Stamp Duty Exemption: Stamp duty exemption of 50 percent, 75 percent and 100 percent
exemption is available to units depending on their category/classification.
vi. Skill Support: State Textile University is proposed to be set up in Vidarbha aimed at providing
specialized courses in the focused sectors.
vii. Quality improvement and R&D: A 75 percent subsidy on expenses incurred on quality certification
limited to Rs.1 lakh is allowed. Moreover, a 75 percent subsidy on the expenses incurred on
patent registration with a capping of Rs.10 lakh is made available for the National patents and
Rs.20 lakh for the International patents.
15.4.11 Odisha Industrial Policy Resolution 2015

The aim of State’s industrial policy introduced in 2007 was to promote rapid industrialisation and facilitate
more investment. Textile was one of the prominent industries that was focused on in that policy although
there was no mention of technical textiles. The main objective of ‘Industrial policy resolution 2015’ was
reinforcement and acceleration of the growth of various industries in the state. Textile and apparel sector was
one of the prominent industries that was to be focused on. In this policy resolution of 2015, technical textile
was mentioned in the context of industries proposed for Special Economic Zones (SEZ) that were planned to
be set up. Technical textiles find mention in the industrial policy of Odisha as one of the priority sectors.
i. Land and Infrastructure Support: The government of Odisha promotes land availability at subsidised
rates for all industries including textile industry.
To boost the setting of anchor industrial units of a technology park, the policy provides subsidy of 25
percent on cost of land.
The policy further exempts the industrial units from premium payment due to change of land-use
charges as per below criteria:
o 100 percent up to 100 acres and 50 percent for balance area
ii. Capital Subsidy: The capital subsidy will be 50 percent to the maximum limit of Rs 10 crores for green
field industrial park/cluster and 50 percent to the maximum limit of Rs 5 crores for up-gradation of
brown field clusters.
For MSME sector, the capital subsidy will be 25 percent for general and 30 percent for SC/ ST.
Table 15.12: Capital Subsidy under Odisha Industrial Policy resolution 2015
Nature of Incentive Provision of incentive
Capital Subsidy for Plant and Capital subsidy of 10% upto maximum as indicated based on employment and
Machinery investment in Auto and Auto Components, Agro and Food Processing, Textile
including Technical Textile & Apparel, Pharmaceuticals and Plastics sectors
Category of location Maximum Capital Subsidy
A1/ B1 10% of investment with a max. of Rs. 10.0 Crores
_______________________________________________________________________________________________

___________________________________________________________________________________________________
iii. Interest Subsidy: Interest subsidy will be 5 percent per annum on term loan for a period of five years
upto a maximum limit of Rs. 1 crore.
iv. Power Cost Support: The state government offers reimbursement of Rs. 0.25 – 1.25 per unit for a
period of 5 years, based on employment and investment levels as defined in the policy.
100 percent Exemption on Electricity duty for a contract demand of 5 MVA for 5 years.
The policy also offers one-time reimbursement of energy audit cost for MSMEs with ceiling of Rs. 3
lakhs.
v. Plant & Machinery/Technology upgradation related support: The policy offers Environmental
Protection Infrastructure Subsidy of 20 Lakhs or 20 percent of capital cost of setting ETP for MSMEs.
The state government shall also provide an assistance of 100 percent of cost of purchase of technical
know- how up to Rs. 1 Lakh in case of indigenous technology and up to Rs. 5 Lakhs in case of
imported technology.
vi. Stamp Duty Exemption: The state government has granted 100 percent exemption with respect to
land allotted by the Government to IDCO or Govt/IDCO to Private Industrial Estate Developers or
when transfer of land/shed by Govt, IDCO and Private Industrial Estate developer to industrial units,
on Loan agreements, credit deeds, mortgages and hypothecation deeds executed by the Industrial
Units in favour of banks or financial institutions.
vii. Skill Support: To encourage entrepreneurship in technical textiles, State Government has introduced
an Entrepreneurship Development Subsidy program which offers
o Reimbursement of 75 percent of course fee limited to Rs. 50,000 per course.
o Reimbursement of training cost up to Rs. 1750 – 4000 per person, for every person newly
trained or undergoing skill upgradation for a period of three years, based on employment and
investment levels.
The state government shall also provide 50 percent of cost incurred for skill upgradation or training
for local manpower:
o For MSMEs: Up to Rs. 3000 per person for maximum 10 persons in micro and 20 persons in
Small and Medium enterprises.
o Additional amount of Rs. 1000 per women trainee.
viii. Quality development and R&D support
• To promote innovation in the sector, the government has introduced a policy to grant reimbursement
of 100 percent of the Patent Registration cost up to maximum of Rs. 10 Lakhs.
• The policy will also support any cost incurred on Quality Certification along with renewal for
consecutive two years i.e. for a period of 3 years @ 100 percent to a total maximum limit of Rs. 3
Lakhs.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
• Employment and employee related support: The state government has drafted a policy that offers
discounted rates for Workers' Hostel at 50 percent of the prevailing market rates of IDCO for 1-3
acres of land, based on employment and investment levels.
• To promote employment in the sector, the government has come up with an incentive of Rs. 1500 per
worker per month for 36 months if 90 percent of workers are domicile of Odisha with minimum 200
employees.
• 100 percent reimbursement of Employment Cost Subsidy (ESI/ESF) was also stated in the policy as
follows:
o For 3 years for displaced employees and for 5 years for disabled employees
o 75 percent for male; 100 percent for female
o For Micro & small units for 5 years @ 50 percent for male; 100 percent for female: For
Medium units for 3 years
15.4.12 Punjab Industrial and Business Development Policy 2017

Industrial policies were formulated by the State Government in 1978, 1982, 1989, 1992, 1996, 2003, 2009,
2013 and Punjab Industrial Policy was last notified in 2017. The State has defined technical textiles as one of
the Thrust Sector only in the current 2017 scheme, taking into account the potential for their future growth in
the state and the generation of jobs.
Initiatives to support technical textiles as per the policy
i. A Technology Centre for Advanced Textiles will be set up by the state. The technology centre will
serve as a research and demonstration centre for the latest tools and know-how in technology,
engineering and design facilities, prototyping, testing and calibration, incubation and training.
ii. The state government has granted a 5% interest grant to MSMEs for new/expansion/diversification in
addition to the ATUF benefits for technical textiles for a period of three years subject to a maximum of
Rs. 10 Lakhs per year.
iii. Land and Infrastructure Support: The government of Punjab has offered land cost rebate: Land cost is
counted under fixed capital investment for incentives under Punjab's Industrial & Business
Development Policy 2017.
The policy further provides 100 percent exemption to the industrial units from premium payment due
to change of land-use charges and external development charges.
iv. Power Cost Support: The state government shall provide electricity to all industrial units at subsidised
tariff of $0.07 (INR 5) per unit.
The policy also offers 100 percent exemption from payment of electricity duty for 15 years.
v. Stamp Duty Exemption: The state government has granted 100 percent exemption or reimbursement
of stamp duty on purchase or lease of land and building.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
vi. Employment and employee related support: To promote employment in the sector, the government
has offered employment generation subsidy with no domicile restriction as per criteria mentioned
below:
o Upto Rs. 36,000 per employee per year upto 5 years
o Upto Rs. 48,000 per employee per year for Women & SC/BC/OBC upto 5 years
15.4.13 Rajasthan Special Customised Package for Textile Sector

enterprises-2013
i. There is no separate full-scale textile policy declared by the state. ‘The Special Customised Package
for Textile Sector enterprises’ came into effect in 2013 and was implemented till 31st March 2020.
There has also been a declaration of ‘State Industrial Development Policy in 2019’. In this policy, the
MSME textile sector (textile & apparel) has been identified as one of the focus sectors and the
technical textile has been identified as one of its segments.
ii. A special Interest subsidy @ 7% per annum has been approved for new enterprise in technical textile
sector. It is applicable for 5 years on a term loan availed from Public Financial Institutions / banks.
15.4.14 Rajasthan Investment Promotion Scheme 2019

The state does not have a full-fledged textile policy but the benefits and incentives to textile industry are
available through the provisions of ‘Special Customised Package for Textile Sector Enterprises 2013’.
‘Rajasthan Investment Promotion Scheme 2019 (revised from its version of 2014)’. The benefits and
incentives offered by the state government are as follows:
iii. Land and infrastructure support
• The state government has offered 100 percent exemption from payment of stamp duty, land
conversion charges and land tax for 7 years.
iv. Power Cost Support
• The state government has offered 100 percent exemption from payment of electricity duty for 7 years
Enterprises making an investment equal to or above rupees twenty-five lakh in the textile sector shall be
granted the following benefits/incentives.
v. Capital Subsidy
Capital Subsidy on zero liquid discharge based effluent treatment plant equivalent to 20% of the amount
paid to the suppliers for the plant excluding civil work, subject to a maximum of Rs. 1 Crore, to
enterprises of textile & apparel sector; and
or
Capital subsidy equivalent to 25% of the investment made on the plant & machinery as specified under
the TUF Scheme of Government of India, subject to a maximum of Rs. 50 Lakhs.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
vi. Interest Subsidy
5% interest subsidy for a period of five years on term loan taken by enterprise from financial institutions
or State Financial Institutions (SFIs) or banks recognised by RBI.
or
6% interest subsidy on term loan taken by enterprise from financial institutions or State Financial
Institutions or banks recognised by Reserve Bank of India, for making an investment in plant & machinery
as specified under the TUF Scheme of Government of India, for a period of five years, for enterprises
making investment more than Rs. 25 Crores.
or
7% interest subsidy on term loan taken by enterprise from, Financial institutions or State Financial
Institutions or banks recognised by Reserve Bank of India, for making an investment in plant & machinery
as specified under the TUF Scheme of Government of India, for a period of five years, for Apparel Sector
and enterprises manufacturing Technical Textiles and Khadi & Handlooms.
15.4.15 Tamilnadu Integrated Textile Policy 2019

The State government of Tamilnadu launched ‘Tamilnadu Integrated Textile Policy 2019’
Under this policy, the state government has categorised the technical textiles sector as a focus area of
intervention and these offer various assistance and incentives as follows:
i. Credit Linked Capital Investment Subsidy @ 15 percent for investments on eligible machinery in
technical textiles under ATUFS
ii. Concessional Custom Duty for specific technical textile machinery @ 5 percent
iii. Financial support to Technical Textile Park @ 9 percent of project cost, subject to a maximum
ceiling of Rs. 9 Crores will be provided as state government grant for setting up of Technical
Textile Parks under Scheme for Integrated Textile Parks (SITP). This assistance is in addition to
the assistance provided by Government of India but is subjected to the maximum ceiling of Rs. 9
Crores.
iv. Interest subsidy of 6 percent for technical textile projects will be provided in addition to any other
incentives available from the Government of India.
v. Funds will be earmarked and overseas study will be conducted to identify potential technical
textile markets and products.
vi. Stamp duty exemption of the entire 100% amount will be given for technical textile projects.
vii. Capital Subsidy: An additional 5 percent Capital Subsidy is also provided for new / expansion of
textile units set up in southern districts.
viii. Power Cost Support: The policy offers Electricity Tax exemption for 2 years to 5 years on power
purchased from TANGEDCO or generated or consumed from captive sources.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
ix. Skill Support: 25 percent subsidy will be provided for setting up of new training centres for
Apparel and Textiles linked with ITIs, towards machinery purchased, subject to a maximum
ceiling of Rs.20 lakh per centre. Subsidy will be given through Tamil Nadu Skill Development
Agency.
x. Quality development and R&D support: To promote innovation in the industry, the government
shall provide subsidy upto Rs.2 Crores per CFC is provided for setting up of design centre / studio,
testing facilities, training centre, information cum trade centre and common raw material / yarn /
sales depot, water treatment plant, dormitory, worker's residential space, pre-weaving and post-
weaving facilities etc.
xi. Employment and employee related support: To promote employment in the sector, the
government shall provide soft loan to companies employing more than 1500 people and located in
certain notified districts of Tamil Nadu.
15.4.16 Telangana Textile and Apparel Incentive Scheme 2017

Telangana issued its first ‘Textile and Apparel Incentive Scheme’ in 2017. This incentive scheme is valid for
next five years for both new and existing units. One of the objectives is to have ‘A proactive approach for
manmade fibre segments owing to an increase in overall consumption of these fibres in the technical textile
application’.
i. Scheme for Capital Assistance (S-CAP)
The model of financial assistance for capital assistance in technical textile units has been segmented in the
following way:
Table 15.13: Model of financial assistance for capital assistance in technical textile units
Category Definition Capital Subsidy
(for technical textiles)
Investment Minimum employment
(Rs. Crores) (number)
A1 <10 50 35% (cap of Rs. 2.5 Crores)
A2 10-50 200 35% (cap of Rs. 5 Crores)
A3 50-100 300 35% (cap of Rs. 10 Crores)
A4 100-200 500 35% (cap of Rs. 20 Crores)
A5 >200 1000 35% (cap of Rs. 40 Crores)
ii. Scheme for Operational Assistance
• Interest Subsidy: It was proposed that 75% of the interest rate of the loans availed by a unit, subject to a
capital of 8% per annum, for technical textile related projects for 8 years.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
• Power Tariff Subsidy: The power tariff subsidy is provided to all the technical textile units with an
additional benefit of Rs. 0.50 per unit across all the following categories:
Table 15.14: Power tariff subsidy across categories
Category Power Tariff Subsidy
A1, A2 Rs 1.00 / unit
A3 Rs 1.50 / unit
A4 Rs 1.75 / unit
A5 Rs 2.00 / unit
iii. Concession on SGST: 100% SGST reimbursement is accessible on taxable technical textile based end-
product / intermediate product for seven years from the date of starting of marketable production, or
up to the realisation of 100% fixed and eligible fixed capital investment.
iv. Investment Subsidy: Financial assistance of up to 50 percent of the investment in technology

development, subject to a maximum amount of Rs. 10 Lakhs per process/product will be offered to
eligible units.
v. Stamp Duty Exemption: 100 percent reimbursement of the stamp duty/transfer duty paid during
purchase of land.
vi. Skill Support: Training subsidy of Rs. 3000 per employee to the companies to reimburse the cost
incurred in skill upgradation and training the local manpower. The subsidy shall be Rs. 5000 per
employee for units employing more than 1000 persons.
vii. Quality development and R&D support: 20 percent subsidy will be offered by state government for the
annual expenditure of the firm on design and product development expenditure limited to a maximum
subsidy of Rs. 2 Lakhs per year.
viii. Scheme for Infrastructure Support (S-IP): The anchor customer(s) and first movers will earn an
extended rebate of 50 % of the cost in any new textile park, with an upper limit of rebate of Rs. 20
lakhs per acre. In the case of technical textile units, an additional 25 % rebate will be extended with a
limit of Rs. 10 Lakhs per acre.
ix. Kakatiya Integrated Mega Textile Park
• Kakatiya Integrated Textile Mega Park is coming up over an area of nearly 2,000 acres in Warangal.
• Mega Park will have low-end SME units as well as high-end technical textiles, manmade fibres and textile
machinery production units.
• The Mega Park will have an Incubation Centre to impart the spirit of entrepreneurship and introduce
entrepreneurs into the innovative community so that their innovations are turned into new goods or
services that can be promoted and sold.
• The Mega Park will have a Textiles Centre for Excellence. The Centre will be formed as a lead partner
with the Government of Telangana, duly supported by leading technical institutions such as SIMA, SITRA,
_______________________________________________________________________________________________

___________________________________________________________________________________________________
BITRA, NIFT or industry federations/associations. The Centre will concentrate on R&D, Human Resource
Development, Professional Textiles Testing and Evaluation, Consulting, Incubation Support and
Instrumentation.
15.4.17 Uttar Pradesh Handloom, Powerloom, Silk, Textile &

Garmenting Policy 2017
The state does not have any special provisions for technical textiles but, the state government offers following
incentives and benefits to enterprises engaged in production of textile and garments under the Uttar Pradesh
Handloom, Powerloom, Silk, Textile & Garmenting Policy 2017:
i. Land Subsidy @50 percent of land cost (30 percent in GB Nagar district) on land purchase from State
Agencies
ii. Stamp duty exemption @100 percent (75 percent in GB Nagar district)
iii. SGST refund for 10 years @90 percent to MSME units, @80 percent to Mega units
iv. Electricity Duty exemption @100 percent to new units for 10 years
v. Capital Investment Subsidy @25 percent for plant and machinery based on investment
vi. Interest Subsidy @7 percent upto Rs. 1.5 Crores (upto Rs. 75 Lakhs for GB Nagar) for 7 years for
procurement under TUFS
vii. Infrastructure interest subsidy @5 percent upto Rs. 1 Crore for 5 years per unit for developing
infrastructural amenities
viii. Quality Development Subsidy @ 5 percent upto Rs. 1 Crore for 5 years per laboratory for research and
quality improvement
ix. EPF reimbursement for 5 years to new unit @50 percent with minimum 100 workers & @ 60 percent
with minimum of 200 workers
x. Special incentives for textile parks: Stamp duty exemption @100 percent to developer (except in GB
Nagar district) and @50 percent to first buyer of plot/unit. Interest Subsidy @50 percent on purchase
of land for 7 years upto Rs. 50 Crores and @60 percent for 7 years for construction of staff-quarters,
hostel/dormitory
15.4.18 Uttarakhand Mega Textile Policy 2014

Uttarakhand Government has announced a ‘Mega Textile Policy 2014’ as part of which, it provided a variety of
incentives for development of a series of textile parks in the Kumaon area. Three textile parks are being set
up in Kashipur, Jaspur and Sitarganj where a host of benefits will be available to draw new investment. The
Mega Textile Policy 2014 has been amended in 2016 and valid till 2021.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Following key incentives have been introduced for all textile units including technical textiles:
i. Interest subsidy of 7 percent for 7 years upto a maximum limit of Rs. 50 Lakhs to be paid annually
ii. 100 percent refund of stamp duty/tax
iii. Reimbursement of 1/- per unit on the energy bill and 100% electricity tax refund for 5 years
iv. 50 percent rebate on the prevailing land prices of the State Infrastructure and Industrial Development
Company of Uttarakhand (SIDCUL)
v. The capital subsidy will be 15 percent to the maximum limit of Rs 50 Lakhs for MSMEs and 15 percent
to the maximum limit of Rs 30 Lakhs for heavy industry
vi. 75% Mandi Duty Waiver for Textile Industries
15.4.19 West Bengal Textile Policy 2O13-2O18

West Bengal Textiles Policy 2007-12 recognised technical textile as one of the emerging sectors. Jute industry
was marked as a part of technical textile industry. Following this, West Bengal textile policy 2013-18 was
announced with a mission to double the share of State’s textiles industry from 5.2% to 10% by the year 2022-23.
Special incentives for technical textiles
i. 10% additional subsidy is provided for setting up technical textiles unit. This subsidy is over and above
the capital subsidy available under this policy and is also in addition to any capital subsidy available from
Government of lndia (subject to a ceiling of Rs. 5 lakhs for small enterprises and Rs. 10 Lakhs for
medium enterprises)
ii. An eligible Micro, Small or Medium enterprise engaged in manufacture of technical textile products
irrespective of location are entitled to get annual payment of marketing incentive @5% on the sale value
of its manufactured products which are exported.
iii. Capital Subsidy: 10 percent-40 percent capital subsidy is offered depending on category of unit and its
location zone. Subject to a ceiling of Rs. 50 Lakhs for small enterprise. 20 percent additional subsidy is
offered on admissible subsidy for all enterprises wholly owned by women, SC/ST and minority community
entrepreneurs. This incentive would be in addition to what the unit gets under any scheme of GoI.
iv. Interest Subsidy: For micro and small units subsidy offered by state is 6 percent for all units and 7.5
percent to units set up in the C and D Zone districts for 5 years. For Medium Enterprise in Zone B & C –
25 percent of total Term Loan Interest subject to ceiling of Rs. 175 Lakhs per year for 5 years. For
Medium enterprise in Zone D – 25 percent of total Term Loan Interest subject to ceiling of Rs. 175 Lakhs
per year for 7 years.
v. Power Cost Support: Micro & Small Enterprise – 100 percent waiver for 4 years for Zone A & B and for 6
years for Zone C & D. Medium Enterprise in Zone B & C – 100 percent waiver of electricity on the
electricity consumption for 5 years subject to maximum of Rs. 25 Lakhs per year or Rs. 1.25 Crore for 5
_______________________________________________________________________________________________

___________________________________________________________________________________________________
years. Medium Enterprise in Zone D – 100 percent waiver of electricity duty on the electricity
consumption for 5 years and 75 percent waiver from the sixth year upto tenth year subject to maximum
of Rs. 50 Lakhs per year or Rs. 2.50 Crores in 5 years
Incentives offered for Jute sector
i. The government offers a rebate of 25 % of the project expense subject to a cap of Rs 5 lakhs to help
business growth, branding and design.
ii. The state government offers reimbursement of 50 % of cost up to a limit of a maximum of Rs. 5
lakhs for expenses incurred in securing registration of patent.
iii. The State Government will provide consulting and facilitation services to define and record the
Geographical Indicator (GI).
iv. Reimbursement for expenditure incurred in Quality Certification: Micro & Small Enterprise- 50 percent
of cost subject to a ceiling of Rs. 5 Lakhs for obtaining certification /accreditation like ISO-9000, ISO-
14000, ISO-18000, Social Accountability Standards, OEKO-TEX etc.
_______________________________________________________________________________________________

16. Formulation of Indian
Standards for Technical
Textiles
A standard can be defined as a documented method to evaluate the quality of a material such as plastics,
textiles, metal etc., using a predefined set of instructions. A Standards document contains an outline of the
procedure and identifying characteristics which are essential for confirming quality. Application of standards
has made it easier to ensure that products and services are harmonized and consistent. If a product fulfils the
standard requirements, it gives consumers and users confidence that it is safe to use and consume.
Technical textiles are used in diverse applications where they are required to meet stringent functional
requirements which can be consistently ensured only if they conform to certain standards. One of the major
impediments to expansion of the technical textile industry in India is the lack of standards and regulations.
Well-defined standards will help manufacturers develop and manufacture products as per requirement for a
given application, and ensure customers consistent and high quality products. It will also help the government
develop regulations to prevent sub-standard products from being manufactured or imported into the country.
It will help investors take well informed investment decisions in development and manufacturing of technical
textiles in India. It will help exporters increase their exports of technical textiles.
Bureau of Indian Standards (BIS) is responsible for development and notification of standards for technical
textiles. It has so far developed 377 standards covering different areas of technical textiles. The overall
framework of standards related to technical textiles, process of formulation of standards, status of the
standards developed so far by BIS and a comprehensive list of standards that have been made available so
far, are presented in the following sections.
BIS Committees for formulation of standards for technical textiles
The 13 committees which comprise experts and are involved in the development of standards at BIS are
listed below:
1. TXD 3 Jute and Jute Products Sectional Committee (Packtech)
2. TXD 18 Textile Materials for Marine/Fishing Purposes Sectional Committee (Agrotech)
3. TXD 23 Textile Materials Made from Polyolefins Sectional Committee (Packtech)
4. TXD 30 Geosynthetics Sectional Committee
5. TXD 32 Textiles Protective Clothing Sectional Committee
_______________________________________________________________________________________________

___________________________________________________________________________________________________
6. TXD 33 Industrial Fabrics Sectional Committee
7. TXD 34 Technical Textiles for Buildtech Applications Sectional Committee
8. TXD 35 Technical Textiles for Agrotech Applications Sectional Committee
9. TXD 36 Technical Textiles for Meditech Applications Sectional Committee
10. TXD 37 Technical Textiles for Sportech Applications Sectional Committee
11. TXD 38 Technical Textiles for Mobiltech Applications Sectional Committee
12. TXD 39 Technical Textiles for Clothtech Applications including Narrow Fabrics and Braids Sectional
Committee
13. TXD 40 Composites and Specialty Fibres Sectional Committee
Relevant industry and their associations, TRAs, COEs, Academic Institutes and Test Houses are the members
of the Sectional Committees and have been actively participating in the standard development process. Heads
of TRAs are also holding the Chairpersonship of Sectional Committees on technical textiles.
16.1 Process of development of standards at

BIS
The steps involved in defining a new standard for a product starts with development of a proposal for
formulation of a standard for a particular area or product. It is followed by setting up of a committee in this
area. Various stages involved in the development of standards are shown in the figure given below:
Figure 16.1: Development process for standards at BIS
Available standards for method of tests published by ISO have been adopted by BIS to ensure uniform test
procedures. The process involved in developing a new standard involves discussions, committee meetings,
feedback from different stakeholders before a standard can be adopted. Availability of a working draft or
preliminary draft on any new subject from stakeholders is the main constraint in developing a new standard.
Adoption of product standards of any international origin depends upon the technological status of the Indian
_______________________________________________________________________________________________

___________________________________________________________________________________________________
industry, user requirements, environmental considerations etc. The process of formulation and adoption of a
new standard usually takes one to two years.
Steps taken by BIS to streamline standardisation
• The digitalisation of standardisation: BIS has moved its entire standard formulation activity to the digital
mode. It has developed an online portal e-BIS (https://www.manakonline.in), which brings together a
wide range of activities such as development of standards, conformity assessment, testing, etc.
• Standards National Action Plan: A Standards National Action Plan has been prepared to enhance
stakeholders’ involvement in standards formulation processes, make the process fast and efficient,
harmonise standardisation activities, increase participation for international standardisation activities,
increase awareness and implementation of standardisation. The details of the plan are available on the
website of BIS (www.bis.gov.in)
• Strategic road map of the Division Council: BIS, in consultation with various stakeholders, has prepared a
strategic road map of Textiles Division Council. Its goal is to align standardisation with the emerging
needs and prevalent trends in view of rapidly changing economic and social scenario.
• Creation of Standardisation Cells: In order to broad-base the standardisation process and enhance
stakeholder involvement, all central government ministries and state governments have been advised to
establish Standardisation Cells and to be sensitised about their role in developing and implementing
standards. The industry associations across all sectors have been advised similarly. Details of
standardisation cells are available on the BIS website.
• MoUs have been signed with IITs, HBTI and NITRA to foster greater involvement of academia in the
formulation of standards and their promotion.
• One Nation One standard- In order to avoid overlaps and duplication, the Accreditation of Standard
Development Organisations (SDOs) scheme has been implemented.
• Free access to Indian standards- Indian standards have been made freely accessible and downloadable.
Table 16.1: Number of standards developed and being developed by BIS in different
segments of Technical Textiles
Number of standards developed
Area of Technical Textiles BIS Committee Number
and being developed
Agrotech TXD 35, TXD 18 44*
Buildtech TXD 34 7
Clothtech TXD 39 37
Geotech TXD 30 81
Indutech TXD 33 44
_________________________________________________________________
*Includes 25 Standards formulated by TXD 35 (Agrotextiles) and TXD 18 (Fishing Nets not including Fishing Gear)
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Number of standards developed

Area of Technical Textiles BIS Committee Number
and being developed
Meditech TXD 36 70
Mobiltech TXD 38 17
Packtech TXD 3, TXD 23 56
Protech TXD 32 61
Sportech TXD 37 3
Composite and speciality fibres TXD 40 33
Ropes and Cordages TXD 9 50
Source: BIS website page accessed on 30th Nov. 2021

URL: https://www.services.bis.gov.in:8071/php/BIS_2.0/dgdashboard/published/subcommtt?depid=NzE%3D&aspect=&from=&to=
16.2 New Standards under development on

Technical Textiles
Details of some of the new standards that are under development, are presented in the tables below:
Table 16.2: New standards under development in Agrotech

S. No. Title
1. Textiles – Polypropylene spun bonded non-woven crop covers and fruit skirting bags for agricultural and
horticultural applications – Specification
2. Agro-Textiles – High density polyethylene HDPE laminated woven lay flat tube for use as lateral in rain
irrigation system – Specification
3. Agro-Textiles – Flexible water storage tank for agriculture and horticulture purposes – Specification
4. Agro-Textiles – Hail protection nets for agriculture and horticulture purposes – Specification Part 1 - Warp
knitted hail protection nets
5. Agro-Textiles – Hail protection nets for agriculture and horticulture purposes – Specification Part 2 - Woven
hail protection nets
6. Agro-Textiles – Bird protection nets for agriculture and horticulture purposes – Specification Part 1 - Knitted
bird protection nets
7. Agro-Textiles – Bird protection nets for agriculture and horticulture purposes – Specification Part 2 - Woven
bird protection nets
8. Agro-Textiles – Bird protection nets for agriculture and horticulture purposes – Specification Part 3 -
Extruded bird protection nets
9. Agro-Textiles – Laminated woven orchard protection covers – Specification
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Table 16.3: New standards under development in Geotech

S. No. Title
1. Geotextile tubes for coastal and waterways protection
Geosynthetics – prefabricated vertical drains for applications in infrastructure projects in coastal areas -
2.
specification
3. Specification for geosynthetic in bitumen layers for flexible pavements
Table 16.4: New standards under development in Indutech

S. No. Title
1. Needle punched nonwovens filters
2. Industrial nonwoven wipes
3. Nonwoven scrub pads
Table 16.5: New standards under development in Meditech

S. No. Title
1. Disposable baby diaper – Specification
2. Medical textiles – Eye pad – Specification
3. Medical textiles – Caps – Specification
4. Medical textiles – Bed sheet and pillow cover – Specification
5. Medical textiles – Underpad – Specification
6. Medical textiles – Nonwoven wipes – Specification
7. Medical textiles – Nonwoven fabric for wipes – Specification
Table 16.6: New standards under development in Mobiltech

S. No. Title
1. Textiles – Automotive tufted floor covering – Specification
2. Textiles – Automotive non-woven carpet/mat – Specification
Table 16.7: New standards under development in Protech

S. No. Title
1. Bullet resistant vest
2. High altitude clothing
_______________________________________________________________________________________________

17. Status and
Contribution of Textile
Research Associations
Textile Research Associations (TRAs) were set up in India to provide technical consultancy to the textile
industry and carry out research on various aspects of textile technologies.
TRAs are financially supported by Ministry of Textiles (MoT) to promote research and development to make
Indian textile and allied industries internationally competitive. These associations carry out application-based
scientific studies and foster excellence in technology, engineering and management.
Technical textiles cater to specific individual and industrial requirements; hence these are required to conform
to international and national standards based on the type of product and nature of use. The TRAs have an
important role in establishing test facilities for technical textiles so that conformance to standards can be
ensured.
17.1 Methodology
A detailed questionnaire was developed by IIT Delhi and shared with all the TRAs to understand their key
research areas, projects undertaken, collaborations, training, challenges and issues faced, and future
perspective of the TRAs in the context of technical textiles. The following analysis is based on the responses
received from six TRAs namely ATIRA, BTRA, MANTRA, NITRA, SITRA, and WRA.
17.2 Establishment of TRAs

Eight TRAs have been established so far for testing, research and development activities in the context of
textiles.
Figure 17.1: Chronological order of establishment of TRAs in India
1937 1947 1950 1954 1956 1963 1974 1981
•IJIRA •ATIRA •SASMIRA •BTRA •SITRA •WRA •NITRA •MANTRA
Source: http://texmin.nic.in/about-us/textile-research-associations
_______________________________________________________________________________________________

___________________________________________________________________________________________________
All the associations are well equipped with facilities to carry out research for the respective region and
segments. They provide consultancy services and testing facilities, conduct trainings and workshops, and
publish research findings from time to time. The details of these facilities are listed in the following table.
Table 17.1: TRAs and their specialisations

Textile Research Association Location Specialisation in relation to
Technical Textiles
1. Ahmedabad Textile Industry's Research Association (ATIRA) Ahmedabad Composites & Buildtech
2. Bombay Textile Research Association (BTRA) Mumbai Geotech & Oekotech
3. Indian Jute Industries' Research Association (IJIRA) Kolkata Agrotech
4. Man-Made Textile Research Association (MANTRA) Surat Agrotech

5. Northern India Textile Research Association (NITRA) Ghaziabad Protech & Mobitech
6. South India Textile Research Association (SITRA) Coimbatore Meditech
7. Synthetic & Art Silk Mills' Research Association (SASMIRA) Mumbai Agrotech, Packtech
8. Wool Research Association (WRA) Thane Sportech
17.3 Research
Research & development forms the backbone of TRAs. Scientists play prominent roles in TRAs ranging from
suggesting policies to conducting research on new technologies, imparting training and publishing research
findings. The data on existing research scientists and the deficit is shown below:
Table 17.2: Research Scientists in Textile Research Associations

Textile Research Existing number of Research Deficit in Required Research
Association Scientists Scientists
ATIRA 5 9
BTRA 84 NA
MANTRA 7 2
NITRA 31 NA
SASMIRA 21 NA
SITRA 17 6
WRA 6 NA
Source: Primary survey by IIT Delhi
17.3.1 Funded and sponsored projects

TRAs have undertaken various funded/sponsored projects related to technical textiles in the last six years
(2015-2020). More than 50 funded projects worth around Rs. 44 Crores have been undertaken. The
proportion and value of funded/sponsored projects across 12 segments are presented below:
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Figure 17.2: Funded and sponsored projects undertaken by TRAs in percentage (2015-2020)
Sportech
Protech 8% Buildtech
3% 27%
Meditech
14%
Indutech
3% Oekotech
2%
Hometech
18% Geotech
25%
Most of the projects reported are related to Buildtech followed by Geotech, Hometech and Meditech
segments. The value of funded/sponsored projects undertaken in last six years under each segment is
depicted below:
Figure 17.3: Funded and sponsored projects undertaken by TRAs in Rs. Crores (2015-2020)
10.41
9.63
6.82
5.30
3.03
1.15 1.11 0.76

0.19
h
ch
ch
ch
h
ch
ch
ch
ec
ec
ec
e
te
te
te
te
ite
ot
et
ot
ot
du
or
ck
ild
ed
m
Pr
ek
Ge
Sp
Pa
Bu
In
M
Ho
17.3.2 In-house projects

The TRAs reported undertaking more than 50 in-house projects in the last six years (2015-2020). The
proportion and values of in-house projects across twelve segments are as follows:
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Figure 17.4: In-house projects by TRAs in percentage (2015-2020)
Buildtech Oekotech
Sportech 9% 1% Geotech
24% 9%
Indutech
13%
Protech
23%
Meditech
18%
Packtech
3%
The proportion of in-house projects in Sportech and Protech segments are the highest at around 24% and
23% respectively, followed by Meditech at 18% and Indutech segments at 13%.
Figure 17.5: In-house projects by TRAs in Rs. Crores (2015-2020)
1.31 1.30
0.98
0.71
0.50 0.50
0.19
0.07
ch
h
ch
ch
ch
h
ch
ch
ec
ec
te
te
te
ite
e
te
ot
ot
ot
du
ck
ild
or
ed
Ge
Pr
ek
Sp
Pa
Bu
In
M
17.3.3 Duration of projects

The duration of funded and in-house projects varied between one to three years indicating long-duration
projects as well. Segment-wise average duration of projects is depicted in the following figure.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Figure 17.6: Average duration of projects (Segment-wise in number of years, 2015-2020)
2.85
2.5 2.33 2.25 2.25
2 1.86
1.52 1.4
ch
h
ch
ch
ch
ch
ec
ec
ec
ec
te
te
te
te
ite
ot
ot
ot
et
du
or
ck
ild
ed
m
ek
Ge
Pr
Sp
Pa
Bu
In
M
Ho
O
17.4 Knowledge Dissemination

Knowledge dissemination through training programmes, consultancy projects, workshops, national and
international seminars and conferences have been an integral part of TRAs. In the last six years (2015-2020),
over 250 training programmes and workshops have been conducted. More than 780 consultancy projects
related to technical textiles have been undertaken by them generating revenue of more than Rs. 7 Crores.
Also 40 international and national conferences, seminars and symposiums have been organised by them for
over 2500 participants. Beyond 250 journal publications, around 100 papers in conferences, 5 book chapters,
35 research reports and 4 books have been published in the technical textiles domain by various TRAs to
expand learning and foster development of new skills.
17.5 Consultancy projects

Consultancy projects have been an integral part of the activities of TRAs. The details of top ten consultancy
projects related to technical textiles in last six years are shown in the figure:
Figure 17.7: Top ten consultancy projects by TRAs (Rs. Crores)
0.27
0.25
0.19 0.21
0.15
0.11
2015 2016 2017 2018 2019 2020
_______________________________________________________________________________________________

___________________________________________________________________________________________________
17.6 Training Programmes and Workshops

Over the past six years (2015-2020), in addition to the funded projects, consultancies and assignments, TRAs
have been actively engaged in conducting various training programmes and workshops related to technical
textiles.
Figure 17.8: Number of participants trained by TRAs (2015-2020)
2402
1242
400 267 327 240

267 210 100
78 29 26 50 78
Training programs/Workshops National/International Conferences
Agrotech Geotech Indutech Meditech Protech Sportech Mobiltech
17.7 Publications by TRAs

TRAs have been actively engaged in disseminating knowledge in the form of journal articles, conference
papers, books chapters and research reports. The TRAs reported 126 journal publications, 99 conference
papers, 35 research reports, eight book chapters and books in last six years (2015-2020).
17.8 Revenue generated by TRAs

TRAs generate their revenue through testing facilities, educational programmes and training programmes.
Around 87% of the total revenue can be attributed to testing facilities and remaining 13% revenue has been
generated from educational programmes and training programmes over the last six years (2015-2020).
Figure 17.9: Revenue generated by TRAs (Activity-wise as percentage, 2015-2020)
Through
educational
programmes/
training
13%
Through testing
facilities
87%
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Figure 17.10: Revenue generated by TRAs (Activity-wise in Rs. Crores, 2016-2020)
6.99
6.14
5.53 5.76
5.34
0.90 1.18
0.82 0.83 0.82
2016 2017 2018 2019 2020
Testing Educational/Training program
17.9 Patent Information

In order to make India competitive in the global markets, the TRAs are focusing on innovation, research, and
development of new products and technologies. There are 35 national patents which have been applied for
over the past six years (2015-2020). Of the 35 patents applied in the six year period under study, 26 patents
have been applied for products and 9 for machinery. There are two international patents filed for new
products.
Figure 17.11: Patents applied for by TRAs (2015-2020)
Machinery
patents
26%
Product patents
74%
_______________________________________________________________________________________________

___________________________________________________________________________________________________
17.10 Machines and Equipment

Over the past six years (2015-2020), 85% of total machines and equipment procured by TRAs were procured
from international markets and only 15% were produced domestically.
Figure 17.12: Machines and equipment procured by TRAs (2015-2020)
Domestic market
15%
International
market
85%
17.11 Emerging products and segments in

technical textiles
Asia Pacific has dominated the technical textiles market owing to new technological advancements, increase in
awareness among user groups, and rise in disposable incomes. Products from Meditech, Indutech, Mobiltech,
Geotech, Oekotech, Buildtech, Protech and Sportech segments have emerged as promising ones. As per data
collected from various TRAs in India, the following is the list of emerging products in various segments.
Table 17.3: Emerging products and segments in technical textiles

Segment Products
• Natural fibres for weed control, organic tarpaulins

Agrotech
• Products from jute fibres for maximum protection against weed and erosion control
• Glass fibre composites in marine industry

• Composites, especially reinforced composites in construction and industrial sectors
Buildtech • Carbon fibre-based composites for civil engineering application e.g. bridge repairing
• Honeycomb sandwich panel for various engineering application
• Composites for manufacture of Wind Mill Turbine
• Soft soil and water storage for pond application

• Road and railway track construction
Geotech • Seashore erosion control
• Reinforcement of soil (specially for high strength application)
• Drainage application
• Use of textiles in environmental and manufacturing sectors

Indutech
• Textile with functional properties for high tenacity, better insulation and thermal resistance
_______________________________________________________________________________________________

___________________________________________________________________________________________________
• Healthcare products
• COVID 19 pandemic related products
• Intelligent textiles with sensors (passive, active and adaptive) for sensing harness, stretch sensitive,
safe distancing and measuring respiration rate, temperature, humidity, pulse, SpO2, pH, etc.
Meditech
• Biodegradable and/or recyclable medical and hygiene textiles
• Artificial grafts & 3-D printing technology for better healing of injury and as an alternative
technology
• Anti-microbial textiles
• Seat belts, airbags, carpets, inner fabrics.

Mobiltech • Development of optimised textile components for automobiles like filters, roof linears, panels, seat
cushions and covers etc.
• Applications in areas of erosion control

Oekotech
• Applications in sewage treatment
• Protective Textile for enhanced security requirement

Protech
• Fire and chemical protective clothing
• Inflatable balls and protective equipment

Sportech
• Shock absorbing foam, breathable clothing
17.12 Challenges faced by TRAs

The TRAs reported several challenges specific to them and the technical textiles industry at large.
17.12.1 Lack of infrastructure

Non-availability of machinery and specialised equipment for testing raw material related to technical textiles
remains a major technology gap in India. Most of the machinery used to manufacture technical textile
products is not available in India. This deficiency results in inefficiencies in manufacturing. Lack of adequate
automated and semi-automated garment-making machines, lack of ability to create sensors for high-tech
textiles and deficiency in digital printing technology are significant technology gaps faced by Indian technical
textiles industry.
17.12.2 Lack of standardisation and related regulations

India lacks adequate testing machinery, standardised benchmarks and regulations in many areas related to
technical textiles. This deficiency results in production of sub-standard low quality international sub-par
technical textile products. In addition to that, lack of adequate and appropriate testing procedures as well as
deficient BIS and AATCC norms for standardised quality products remain a significant gap in quest for
achieving better competitiveness.
17.12.3 Lack of skilled manpower

Lack of skilled manpower is a major challenge faced by the Indian textiles industry. Less than 5% of the
workforce in this industry attends any kind of formal training in comparison to around 65-95% workforce in
_______________________________________________________________________________________________

___________________________________________________________________________________________________
other developed and developing nations. In India, shortage of skilled manpower can be seen across segments
at all levels. This includes lack of trained entrepreneurs, workers, and skilled trainers.
17.12.4 Lack of funding in research and development

Funding remains another significant gap for achieving better competitiveness. It hampers research and
development, and impedes entrepreneurship in the manufacturing space.
17.12.5 Poor level of awareness about technical textile products

among end users in India
Most end users of technical textile products are still unaware of the usage and benefits of technical textile
products leading to lack of adoption. Training of entrepreneurs and workers is the need of the hour and will
help spread awareness.
Figure 17.13: Challenges faced by Indian TRAs
Lack of Infrastructure
Poor level of awareness

Lack of standardisation
about technical textile
and related regulations
products
Challenges
face by TRAs
Lack of funding in
Lack of skilled
research and
manpower
development
Source: Primary Survey by IIT Delhi
17.13 Suggestions offered by TRAs

Some possible ways to address the skill and technology gaps include awareness sessions, training, skill
development, improvement in infrastructure, research funds and FDIs. TRAs have shared the following
suggestions to address the gaps faced by Indian technical textiles industry in its drive to achieve better
competitiveness.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Figure 17.14: Current needs of the Indian textile industry
Source: Primary Survey conducted by IIT Delhi
In order to attract investments and boost the technical textiles sector, the government needs to encourage
manufacturing of high-tech machinery. In order to make Indian technical textile industry globally competitive,
development of new technology through R&D, formation of joint-ventures, provision for import subsidies,
impetus to foreign direct investors (FDIs) for promoting capital investment, facilitation for tie-ups and easy
access to funding for start-ups could play crucial roles.
Through policy initiation, government can counter the problem of heavy imports of raw material as well as
machinery to a great extent. Government needs to promote innovation and infrastructure for manufacturing
high-value specialty fibres. A boost to manufacturing can be given in the form of relaxation in customs duty
on imported raw materials and high-tech machinery. Government should provide funds and subsidies for
promoting local production of some of the raw materials. Regulation should be brought in place to control and
stabilise the price of raw material in implantable and extracorporeal textile materials.
In order to boost demand for technical textile products, safety related and other regulations need to be
enforced across industries. Indian standards should be aligned with international standards in order to
promote benchmarking against global standards. Regulatory reforms that support usage of standardised
technical textile products such as flame resistant fabrics, seatbelts, airbags for cars, are essential. Such
regulations will ensure better quality of life for consumers and expand the technical textiles market.
Environment protection and safety rules for end users should be mandatory.
Textile education curriculum needs to be modified, soft skills should be improved and industrial experts should
impart training to students in order to bridge the industry-academia gap. Since technical textiles is one of the
emerging areas in the country and worldwide, existing curriculum of colleges offering degrees in textiles
should have technical textiles as one of the compulsory subjects. Moreover, short-term courses for new as
well as existing workforce should be planned with participation from existing technical textile manufacturers.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
India is currently witnessing a boom in start-ups with fresh graduates opting for entrepreneurship.
Government needs to work with various entrepreneurship development institutes for offering courses on
entrepreneurship in technical textiles. Government should make funding available for entrepreneurs for
establishment of start-ups and research and development (R&D). This will help in improving infrastructure and
promoting better training facilities in the technical textiles sector. Documentation processes for start-ups must
be simplified.
Many TRAs suggested collaboration with international educational institutions and Centres of Excellence
(CoEs) for R&D and new product development by the industry.
TRAs lack information about availability of funds, investment mechanisms and government schemes for
startups. To resolve this challenge, a platform should be created for sharing available information with TRAs
and textile committees who conduct routine training programmes for entrepreneurs.
TRAs also suggested that the testing and incubation facility should be upgraded to provide the institutes with
state-of-the-art equipment to provide the services to customers at affordable prices and meet both domestic
and international needs.
Figure 17.15: Policy suggestions
Awareness among the business community and end-users on technical textiles must be increased by creating
technical textile parks, textile zones, and trade fairs.
Adoption of a PPP model by the government should be implemented in order to build trust amongst investors
and encourage the technical textile industry towards a common goal of making India a global player.
_______________________________________________________________________________________________

18. Status and
Contribution of Centres of
Excellence in India
Technical textiles is one of the fastest-growing sunrise sectors and an emerging area for investment in India.
In order to boost research and innovation in the technical textiles sector and to foster global excellence,
Government of India has set up ten Centres of Excellence (COEs). These COEs specialise in various application
segments of technical textiles and are equipped with internationally accredited testing labs and training
facilities for trainers and technicians from the industry.
18.1 Methodology
In order to assess the performance of COEs in various activities related to technical textiles, a detailed
questionnaire was developed by IIT Delhi and was shared with all the COEs as part of the primary survey
exercise. The questionnaire was aimed at recording the information of COEs for understanding the key
research areas, projects undertaken, revenue generated, challenges and issues faced, and plans for the future
of the COEs.
The analysis that has been presented in the following section is based on responses received from ten COEs
namely ATIRA, BTRA, DKTE Institute, IJIRA, MANTRA, NITRA, PSG College, SASMIRA, SITRA and WRA. The
scheme for jute-based Geotextile undertaken by IJIRA is not operational yet. MANTRA is the active COE
partner of SASMIRA in Agrotech segment. The key findings emanating from the primary survey are presented
in the sections that follow.
18.2 Centres of Excellence

18.2.1 Details of the COEs
Details of the eight COEs (six product-oriented and two process-oriented COEs) are presented in the table
below:
Table 18.1: Details of the COEs

Other
S. Key Year of
Designated institute for COE Partner Location Focus
No. Segment Establishment
Area
PRODUCT FOCUSED COEs
The Bombay Textile Research
1. ATIRA Mumbai Geotech Oekotech 2008
Association (BTRA)
Synthetic & Art Silk Mills Research MANTRA, IIT
2. Mumbai Agrotech Packtech 2008
(SASMIRA) Delhi
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Northern India Textile Research

3. IIT Delhi Ghaziabad Protech Mobiltech 2008
Association (NITRA)
Anna
The South India Textile Research
4. University, Coimbatore Meditech - 2009
Association (SITRA)
Chennai
5. PSG College of Technology - Coimbatore Indutech Hometech 2011
VJTI
6. Wool Research Association (WRA) (Knowledge Thane Sportech - 2012
partner)
PROCESS FOCUSED COEs
Ahmedabad Textile Industry's Research
7. - Ahmedabad Composites Geotech 2011
Association (ATIRA)
8. DKTE's Textile & Engineering Institute - Kolhapur Nonwovens - 2011
Four COEs were established under the scheme for Growth and Development of Technical Textiles (SGDTT)
launched during 2007-08. These were established at SASMIRA (with MANTRA as partner), BTRA, NITRA, and
SITRA in the areas of Agrotech, Geotech, Protech and Meditech segments respectively.
Four more COEs were set up between 2010-11 and 2014-15, under the Technology Mission on Technical
textiles (TMTT). These COEs are established at DKTE, ATIRA, PSG College of Technology, WRA and were
established to build national expertise in nonwovens, composites, Indutech, and Sportech, respectively.
18.2.2 Location
The map presented below shows the location of COEs; most COEs are in the western region of the country
with maximum number (three) of them located in Maharashtra.
Figure 18.1: Geographical spread of COEs in India
_______________________________________________________________________________________________

___________________________________________________________________________________________________
18.3 Findings from the Primary Survey of COEs

18.3.1 Revenues generated by COEs in the last six years (2015-2020)
COEs generate their revenues through product development facilities, technical testing facilities and technical
textiles projects. The figure presented below depicts the aggregate revenues generated across various
segments.
Figure 18.2: Revenues generated from various sources by COEs in Rs. Crores (2015-2020)
From the figure above, it can be inferred that the total revenue generated during the last six years (2015-
2020) is about Rs. 51 Crores. COEs generate revenue through product development facilities, technical testing
facilities and technical textiles projects. Technical textiles product development facilities are the major source
of revenue for the COEs. The maximum revenue per segment is Rs. 17.34 Crores generated by the
composites segment which accounts for 33% of the total revenues generated by all the COEs put together.
Sportech and Meditech segments contributed over 19% and 16% respectively to the total revenue generated.
Agrotech segment generates only 1% of the total revenue, suggesting that there is a need to take steps to
increase revenue generation in this segment.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
18.3.2 Standards used for testing technical textiles across various

segments of COEs
The COEs use Indian Standards, American Standard for Testing and Materials (ASTM), International
Organisation for Standardisation (ISO), INDA- EDANA, and European Standards (EN) to cater to the needs
of technical textiles industry.
Figure 18.3: Testing standards used by COEs (As percentage, 2015-2020)
DIN-EN Standards Indian Standards

6% 32%
ISO Standards
36%
ASTM Standards
INDA-EDANA
22%
Standards
4%
Figure 18.4: Testing standards used by COEs (Segment-wise as percentage, 2015-2020)
Source: Primary survey by IIT DELHI
_______________________________________________________________________________________________

___________________________________________________________________________________________________
From the figure and the table shown above, it can be inferred that the three most frequently used standards
used by Indian COEs for testing the products are ISO (36%), Indian Standards (32%) and ASTM Standards
(22%). Together, they comprise 90% of standards used by the COEs. About 64% of all standards used are
international standards, implying that most COEs ensure that products are at par with global standards.
Testing of products in composites, jute geotextile, nonwovens and Sportech segments is done mainly by using
International standards. Indian Standards are used commonly for testing Agrotech, Packtech, Geotech and
Meditech segments.
18.3.3 Publications by COEs (2015-2020)

COEs have also been engaged in knowledge creation and dissemination. The segment-wise distribution of
publications contributed by the COEs over last six years is shown in the graph presented below.
Figure 18.5: Publications by COEs (Segment-wise as percentage, 2015-2020)
The publications include journal papers, research reports, books, book chapters and working papers. Details of
the publications in different technical textile segments across various categories are presented below:
Table 18.2: Number of publications by COEs (2015-2020)

Others (Book
Journal Research
S. No. Segments Books chapters and Total
publications reports
working papers)
1 Agrotech & Packtech 34 18 0 51 103
2 Composites 1 0 0 0 1
3 Geotech & Oekotech 18 12 0 1 31
4 Hometech & Indutech 216 0 11 27 254
_______________________________________________________________________________________________

___________________________________________________________________________________________________
5 Jute Geotextile 25 0 0 1 26
6 Meditech 15 13 0 8 36
7 Nonwovens 69 8 7 12 96
8 Protech & Mobiltech 32 0 4 58 94
9 Sportech 33 12 0 0 45
Total 443 63 22 158 686
From the data presented in the figure and table above, it can be inferred that the maximum number of
publications have been in Hometech and Indutech segments of technical textiles (approximately 37%)
followed by those in nonwovens and in Protech. Most of the research work by the COEs has been published as
journal articles although working papers and research reports have also been published. In terms of journal
papers and books, the highest number of documents has been published in Hometech and Indutech
segments. In terms of research reports and working papers categories it is Agrotech & Packtech, Protech &
Mobiltech which have the highest numbers respectively.
18.3.4 Academic projects undertaken by COEs (2015-2020)

The COEs have undertaken various academic projects during last six years. The figure show below depicts
the segment-wise distribution of the total number of such projects undertaken by the COEs.
Figure 18.6: Number of academic projects completed (2015-2020)
73
56
36
9
5
Composites Geotex & Meditech Nonwovens Protech and

Oekotech Mobiltech
Projects are undertaken by the COEs at three different levels – undergraduate, postgraduate and Ph.D. level.
The information about the academic projects completed by COEs at different levels is presented in the
following table:
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Table 18.3: Number of academic projects completed at different levels (2015-2020)

S. Number of projects at Number of projects at Number of projects at
Name of the Segments
No. Undergraduate level Postgraduate level Ph.D. level
1 Composites 5 0 0
2 Geotech & Oekotech 5 3 1
3 Hometech & Indutech 30 20 2
4 Meditech 2 32 2
5 Nonwovens 40 12 4
6 Protech and Mobiltech 73 0 0
Total 155 67 9
Source: Primary survey by IIT DELHI
From the table presented above, it can be inferred that the maximum number of projects have been
undertaken in Protech and Mobiltech segments and lesser than those in nonwovens and Meditech. Most of the
completed academic projects of the COEs are at undergraduate level. At the postgraduate level, the highest
number of projects are in Meditech segment and lesser than that in Hometech, Indutech and nonwovens. At
the Ph.D. level, the number of completed academic projects is about 4% of the total academic projects,
whereas it is 67% and 29% at the undergraduate and postgraduate levels respectively. The information
presented in the table suggests that there is a need for more projects to be taken up at the postgraduate and
at Ph.D. level. Support from the government and the industry should be provided to meet this need.
18.4 Challenges and Suggestions of COEs

The COEs have experienced growth in terms of revenue generation, testing, and projects undertaken in recent
years, however they are still facing several challenges. The key challenges faced by the COEs are mentioned
below and these are accompanied by corresponding suggestions:
18.4.1 Skilled Scientific Workforce

The COEs need highly skilled workers with proficiency in various application domains such as chemistry,
materials science, polymer science, agriculture, civil engineering, mechanical engineering and textile
engineering, depending on the research area and product type. They should also have competence in
laboratory testing methodologies and be able to handle different types of machinery like perspirometer,
vibrodyne, electrospinning and warp knitting machine, among others. However, COEs have found it
challenging to recruit and retain qualified manpower because the remuneration offered by the COEs is below
that offered by industry and academia. Scientists are often recruited for entry level positions on contract basis
which does not offer them long-term job security. This makes COEs a less attractive career option for young
scientists. Special efforts have to be made to acquire COE-specific competencies by all those who join COEs
because there also is a lack of specialised education and specific on-the-job training by academic institutions
in India to prepare the students for the specific requirements of COEs.
The challenge stated above can be met by COEs imparting in-house and hands-on training on machine and
testing instruments that they have. Further, the COEs must find resources to compensate the scientists at par
_______________________________________________________________________________________________

___________________________________________________________________________________________________
with compensation of scientists working in CSIR laboratories. The COE personnel should be deputed in plants
manufacturing nonwovens and in textile research associations for their training and knowledge upgradation.
The COEs must arrange necessary funds for training and development of employed workforce and for
developing training modules and inter-disciplinary courses related to various application segments. Academic
institutions should also offer Continuing Education Programmes (CEP) for employees of the COEs.
18.4.2 Consumer Awareness

Consumers are unaware of the use and utility of various products of technical textiles. In addition to that,
most of the consumers are price-conscious and not quality-conscious, preferring technical textiles of low-cost
but poor quality even if it causes damage to health and hygiene.
The challenge referred above can be resolved by conducting workshops and seminars for promoting technical
textiles products in India and encouraging the COEs to participate in exhibitions and consumer fairs so as to
showcase the uses and applications of technical textiles.
18.4.3 Financial Resources for Research

Most COEs fail to undertake important research projects due to lack of funds. At present, there is a shortage
of required financial assistance and grants, limiting the ability of COEs to undertake R&D projects, support
incubation activities, or to conduct workshops and seminars.
The challenge mentioned above can be resolved by sponsoring and facilitating funds for R&D projects,
infrastructure, start ups, incubation activities by government and industry.
18.4.4 Specifications and Standards

There is a lack of uniformity in processes and standards used for testing textile products. Many COEs use a
different mix of Indian and international standards. Such lack of standardisation in product specifications leads
to more deviations being permitted during testing and finalising results. COEs require significant support from
the government to formulate and implement new standards.
The challenge mentioned above can be resolved by providing funding support so that COEs can develop
various standards at par with international ones and by standardising product specifications.
18.4.5 International Collaborations

Most COEs have not expanded their operations outside India. This is in stark contrast with international COEs
who have their clients in many countries.
The challenge mentioned above can be resolved by exploring and encouraging COEs to collaborate with other
global COEs, participate in different nonwoven and technical textiles trade fairs and exhibitions at the
international level.
International visibility can also be created by promoting joint R&D projects with foreign COEs.
_______________________________________________________________________________________________

19. Practices of Indian
COEs and COEs in other
countries: A comparison
19.1 Identification of Premier Centres of
Excellence (COEs)
Centre of Excellence (COE) is an organisation located within or outside the traditional academic hierarchy of a
university, college, or department. It is often established by bringing together industry and academia for
pursuing an area of interest by fostering research, innovation, training and service activities. An examination of
research, training, services, and projects of the premier COEs from around the globe can probably offer some
directions about the changes that can be introduced to improve textile research centres in India. It is for this
purpose that suggestions from faculty experts at IIT Delhi were sought and based on their suggestions, five
premier foreign COEs which are working in the field of textile materials and technology (primarily technical
textiles) were identified. The premier COEs so identified are as follows:
i. CLUTEX, Czech Republic

ii. Composites Research Group, University of Nottingham, UK
iii. Nonwoven Research and Innovation Institute (NIRI), UK
iv. Centre for Nanotechnology and Smart Materials (CeNTI), Portugal
v. Taiwan Textiles Research Institute (TTRI), Taiwan
19.2 Basic information about premier

international Centres of Excellence
The information about the basic operational features of the five premier international COEs was collected from
secondary sources ranging from their respective websites to those portals which carried news and views about
technical textile industry prominently.
The following table shows some basic particulars about these premier international COEs:
_______________________________________________________________________________________________

Section 19: Practices of Indian COEs and COEs of Other Countries
___________________________________________________________________________________________________
Table 19.1: Particulars of premier international COEs
S. No. COE Description Area of research Weblink
CLUTEX is cluster of Czech companies, Nanotechnology in

R&D institutions and other institutions textiles, multifunctional
focusing on technical textiles. The main textiles, personal
CLUTEX, Czech
1 objective of this cluster is to support protective textiles, design http://www.clutex.cz
Republic
development and innovation in areas of customised textile
specified by members and based on structures, biotechnology
collective R&D results. and bio-based resources
This is a internationally respected research

group which is located at University of
Composites Nottingham and is focused on supporting https://www.nottingh
Research Group, research in composite materials. The group Biocomposites, composite am.ac.uk/research/gr
2 University of has conducted R&D on Composites Science manufacturing, textile oups/composites-
and Manufacturing projects for over 25 composites research-
Nottingham, UK years. It has also focused on processing group/index.aspx
and performance of advanced fibre
composites.
Nonwoven
NIRI is a private limited company and a Nonwoven textile
Research and
global leader in nonwoven engineering and material for application in https://www.nonwov
3 Innovation
product development. It has completed various segments of ens-innovation.com
Institute (NIRI),
over 500 projects for over 200 companies. technical textiles
UK
CeNTI is a is a private, non-profit R&D

Centre for institute which is collaborative venture of
Nanotechnology three Universities, two technological
and Smart centres and one Institute of New Nanotechnology and https://www.centi.pt/
4
Materials Technologies. It is a centre that focuses on smart materials en/about/welcome
(CeNTI), new technologies with a multi-sectoral
Portugal orientation, it has machines and equipment
based on cutting-edge technology.
This is a government-funded centre which

is regarded as an integrator of technology
Taiwan Textiles and leadership of industry. It offers
Textile materials (fibre,
Research customised multi-integrated and https://www.ttri.org.t
5 fabric, apparel, home
Institute (TTRI), transformative service to interested textile w/en/index.aspx
textile, smart textile)
Taiwan enterprises. It is focused on textile R&D,
service diversification, and expansion into
international markets.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
19.3 Projects and collaborations of premier

COEs
A perusal of information about premier international COEs suggests that the COEs engage in supporting
strategic, applications-oriented research and lay special emphasis on development of expertise in those areas
that relate to potential industrial applications. Such an approach improves their international competitiveness in
research and development and attracts industry, government and even organisation in other countries to
contribute funds. The projects taken up by the premier international COEs which were studied have been
presented in the table below.
Table 19.2: Recent projects of premier international COEs

International
Project title Collaboration (if any) Aim
COE
It is a European Strategic Cluster Partnership. The aim is

Brings together 8 to bring together the main advanced textile material
European technical clusters from Europe to develop and implement a long-
Textile 2020
textile clusters covering term joint international strategy that contributes to
over 900 organisations securing, strengthening, and extending their
CLUTEX, Czech competitiveness at the global level.
Republic
Gremi Tèxtil de Terrassa
This project aims to obtain textile materials capable of
Spain, ATEVAL from
protecting against ticks and bedbugs. It is expected to
Betitex Spain, GEM’INNOV from
obtain durable biocide-treated fabrics of slowly released
France, TEXCLUBTEC
repellent/insecticide effects (at least up to 50 washes).
from Italy
To drive down manufacturing cost, energy usage, and

Advanced
process time in producing lightweight high-end out-of-
Manufacturing
University of Queensland autoclave infused thermoset carbon composite products
Composites Supply Chain
for aerodynamic performance and the highest quality
Research Group, Initiative
aesthetic finish.
University of
Nottingham, UK Fibre-
University of Leeds and To manufacture fibre reinforced composites based on
reinforced
Smith & Nephew, UCL linear aliphatic polyesters and high modulus fibres.
healthcare
The Sanguis nonwoven filter is aimed at developing

The Sanguis NHS Blood and medium and associated filtration technology that can
Nonwoven filter Transplant (NHSBT), UK remove the target antibodies from donated human blood
Research and plasma sufficient to deliver universal plasma.
Innovation Institute
(NIRI), UK
Imperial College London Manufacturing of biodegradable and plastic-free
The tampliner
and Callaly, UK tampliner.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
The iPVEST project is aimed at research and

development of innovative solutions for intelligent, multi-
Intelligent SCOOP Ltd, VIATEL Ltd - risk, protective clothing to increase protection,
Protective and CITEVE prevention and reduce the growing incidence of health
Centre for VEST (iPVEST) Technological Centre and protection problems in installation and maintenance
Nanotechnology of infrastructure in the Energy and Telecommunications
and Smart sectors.
Materials (CeNTI), Digitisation of This project encompasses a set of R&D initiatives with a
Portugal the textile and robust collective character that enhances the adoption
clothing (STV) and transition to the new paradigm of Industry 4.0. It is
TMG Ltd. and CITEVE
value chain aimed to promote the digital transformation across value
(STVgoDIGITA chains, leading to productivity and efficiency of textile
L) companies.
The smart textile technology is based on woven fabric,

through the conductive and packaged inks modification,
Development of Flexible combined with multi-layer precision coating and SMD
Electronic Textiles packaging to develop flexible electronic textile, which
Taiwan Textiles can be applied in soft electronics, wearable and IoT
Government related fields.
Research Institute
Funded
(TTRI), Taiwan Bio-derived natural fibres and compound fibre-based
textiles were developed using alginate, chitosan,
The technology of
collagen, bacterial cellulose, natural cellulose, etc. The
Biological Fibre
final product is biocompatible and can be widely applied
in skin-friendly products and medical care.
19.4 Manufacturing and testing facilities at

premier COEs
The COEs for textiles are often established to perform multiple functions which include providing leadership in
research & development, offering technical consultancy services, carrying out quality evaluation of materials,
facilitating new product development, prototype building, supporting pilot tests, imparting training to human
resources and publishing technical books and papers. It is for this reason that COEs invest in developing excellent
testing and manufacturing facilities. It is the quality and contemporariness of production and testing machines
and equipment which often determines the performance outcomes of the COE thus impacting its reputation in
the industry. The following table gives brief details about the manufacturing and testing facilities available in
premier international COEs that have been considered for the present study:
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Table 19.3: Latest Manufacturing and testing facilities available with premier international COEs
Manufacturing and testing
International COE Description
facility
This robot has a compact six-axis, which are designed for

KUKA six-axis Robot Bentley Room
Composites Research exceptionally high working speeds.
Group, University of
Manufacturing methods like spun-laid, wet-laid, drylaid,
Nottingham, UK Prototyping facilities for nonwoven
electrospinning, are available for prototyping of different
fabrics
nonwoven fabrics.
Nonwoven Research This is an X-ray imaging in 3D, the same method used in
and Innovation X-ray Microtomography (XMT) clinical CT scans, but on a small scale with significantly
Institute (NIRI), UK enhanced resolution.
Functional coatings are applied using different vacuum and

Functional coatings
extrusion techniques.
In this method, a line of electronic components is attached

Surface mount technology and connected on the board's surface using batch solder-
reflow processes.
Centre for
Nanotechnology and 3D printing optimises the design step by speeding iterations
Smart Materials through product testing. Rapid prototyping with 3D printing
3D printing for prototype
(CeNTI), Portugal allows designers to produce multiple design iterations
quickly and change a product design overnight.
The Fanuc M-16 robot provides an intelligent automation

solution for various applications such as material handling
Fanuc M16-1 Robot
and removal, loading and unloading, assembly and even
water jet cutting etc.
19.5 Knowledge dissemination by premier COEs

One of the main aims of the COEs in textiles is ‘knowledge dissemination’ among the professionals working in
the industry in different roles and functions. The main mechanism followed for such knowledge dissemination
is ‘information sharing’ and it is accomplished through various events and programmes such as conferences,
workshops, seminars, visits, fairs, webinars and training programmes. A large part of COE activity comprises
such events and programmes. Besides benefitting the industry professionals, these programmes help the COEs
to develop a sustainable revenue model and build human resource capacity. In order to get a glimpse into the
nature of such activities in premier international COEs, the particulars of recent knowledge dissemination
activities are provided in the following table:
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Table 19.4: Recent knowledge dissemination initiatives of premier international COEs
International COE Type of programmes Description
CLUTEX, Czech CLUTEX organises company visits as a part of

Republic the EXTRATEX project. The aim of the event is to introduce
Czech partners to foreign partners, establish new foreign
EXTRATEX – company visits contacts and possible cooperation across sectors. CLUTEX is
scheduled to conduct the next round between 20th – 24th
September 2021. The programme will consist of company
visits, company presentations and B2B meetings with
partners from various European countries.
Final online conference of TEX4IM (Textile Clusters for

Industrial Modernization) was conducted during 20-22 April
Conference 2021. Lectures and webinars focused on the topics that
covered the circular economy and digital transformation in
the textile industry were held.
BE@Smart Manufacturing Matchmaking event was held

during November 18 - 20, 2020. It was a virtual business fair
with a webinar and also created possibilities of individual
Virtual Trade Show
meetings among potential partners from different countries.
This event was aimed at growing and expanding market
opportunities in the European Textile-clothing sector.
Composites Research
The centre offers facilities for fully-funded PhD opportunities
Group, University of PhD.
in the field of composites.
Nottingham, UK
Nonwoven Research
Technical & Market NIRI provides tailored training programmes to organisations
and Innovation
Intelligence Training depending upon their requirements.
Institute (NIRI), UK
Automotive Interiors Expo “Seamless textile sensing solutions for car seats” was the
2020, Virtual ‘Live’ exhibition theme of this European exhibition on December 1 & 2, 2020.
CeNTI promoted a Webinar dedicated to

the SmartEEs2 Project, whose theme was "Sensing
Centre for Technologies and Devices in Flexible Form".
Nanotechnology and
The webinar, held on July 14th, 2021 was aimed at innovative
Smart Materials
SmartEEs2: Webinar focused companies and researchers interested in working in the
(CeNTI), Portugal
on Printed Electronics printed electronics areas.
Smart EEs2 is a collaborative European project which aims to

promote the adoption and use of "Flexible and Wearable
Electronics" technologies by companies for enhancing their
competitive advantage and responsiveness in the market.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
A Webinar was conducted on December 7th, 2020 by that

CeNTI and TNO. The theme of the webinar was "Hybrid
Printed Electronics for Flexible, Stretchable and 3D Products".
SmartEEs2: Training event The training oriented webinar, directed at professionals,

entrepreneurs and researchers consisted of discussion on
Printed Electronics topics, such as processing, printing,
assembly and building. Some demos associated with these
technologies were also presented.
19.6 Comparative analysis of premier

international COEs and Indian COEs
The activities and performance of the Indian COEs have been studied, analysed and documented as part of this
study. Based on the information documented about Indian COEs and its comparison with the information about
practices of premier international COEs, the following inferences can be drawn to formulate suggestions to
improve the functioning of COEs in India:
i. The Indian CoEs have a relatively weaker international research contacts, expertise, and research training
capacity than the premier international COEs. Indian COEs will have to improve significantly in these
aspects so that they can compete in the global scenario and play an instrumental role in developing
research, innovation, and higher education in technical textiles in India.
ii. Indian COEs earn relatively lesser part of their revenue from projects as compared to premier
international COEs whose primary activity is carrying out projects. Most Indian COEs fail to undertake
important research projects due to lack of funds. There is enough scope for improvement for Indian COEs
in this regard. The challenge mentioned above can be resolved by sponsoring and facilitating funds for
R&D projects, infrastructure, start-ups, incubation activities by government and industry.
iii. Indian COEs are constrained to work in an environment of low customer and enterprise level awareness.
Therefore, knowledge dissemination and information sharing efforts by Indian COEs have to be much
greater than these are at present. Indian COEs can study the high levels of such activities by premier
international COEs and adapt their practices and approach to Indian conditions.
iv. In case of India, there is a lack of uniformity in processes and standards used for testing textile products.
Many COEs use a different mix of Indian and international standards. Such lack of standardisation in
product specifications leads to more deviations being permitted during testing and finalising results. COEs
require significant support from the government to formulate and implement new standards. The premier
international COEs do not face any such challenge and instead are instrumental in formulating and
updating the standards.
v. Most Indian COEs have not expanded their operations outside India. This is in stark contrast with
international COEs who have their clients in many countries. This situation can be remedied by exploring
and encouraging Indian COEs to collaborate with other global COEs, participate in different nonwoven and
technical textiles trade fairs and exhibitions at international level. International visibility can also be created
by promoting joint R&D projects with international COEs.
_______________________________________________________________________________________________

20. Technical Textiles
Education in India
Universities and academic institutions are important instruments for dissemination of relevant knowledge and
for encouraging new ideas and innovation in any field, and technical textiles is no exception. A primary survey
of all the academic institutions and universities which offer textile-related programmes and courses in India
was conducted by IIT Delhi. The responses to the survey have then been documented and analysed to serve
as inputs for policy makers. This may help in formulating better policy interventions for supporting technical
textiles industry in India.
Alongside the primary survey, an attempt has been made to identify the best practices of premier institutes
across the globe so as to identify areas of changes needed in Indian institutions to reinforce their strengths.
20.1 Methodology
All academic institutions and universities of the country which offer programmes in textiles at different levels
(undergraduate, postgraduate, and Ph.D.) were identified for the study. A semi-structured questionnaire
targeted at Heads of Institutions/Heads of Textile Departments was developed by the experts at Indian
Institute of Technology (IIT) Delhi. The content of the questionnaire covered among other things, institution
level data about the textile-based programmes and courses being offered, curriculum, faculty resources,
machines and equipment installed, number of students, research conducted, projects and consultancy
assignments, challenges being faced and future areas likely to be pursued for growth.
20.2 Findings from the Primary Survey of

Academic Institutions in India
Textile related programmes offered by academic institutions and universities in India
Government of India has identified technical textiles as a sector that needs to be put on an accelerated
growth path to unlock India’s potential and to harness opportunities in domestic and international markets.
There is a need to develop a pool of human resources that are trained for specialised skills and knowledge of
technical textiles so that they can undertake new developments and innovations. However, in India, most of
the courses related to technical textiles are offered as part of textile discipline.
We identified and contacted all the academic institutions/university departments which offer technology
programmes in textiles in India. A total of 31 academic institutions and universities participated in the survey.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Table 20.1: Textiles related programmes offered, sanctioned strength and number of
students passed out
S. Name of Programme No. of institutions & Total sanctioned Total number of
No. universities offering strength students who
the programme passed out (2019)
1 B.Tech. / B. Sc. 31 2134 1747

2 M.Tech. 16 375 120
3 Ph. D. 9 243 18
Total 31 2752 1885
Textile-related programmes are taught at four levels – Diploma, Bachelor’s (B.Tech.), Master’s (M.Tech.) and
Doctoral (Ph.D.). The colleges/institutes offering diploma courses are outside the scope of the present study’s
primary survey but list of all such institutions has been provided in Annexure 28 of this report. These
institutes/colleges/ university departments offer Bachelor’s and Master’s programmes in:
i. Textile Technology
ii. Textile Engineering
iii. Carpet and Textile Technology
iv. Textile Chemistry
v. Jute and Fibre Technology
Even though most of these programmes have an elective (optional) course related to technical textiles, none
of the institutions reported offering a complete specialised programme on technical textiles.
All the 31 respondent institutions/universities offer Bachelor’s degree programmes. Master’s and Doctoral
programmes are offered by 16 and 9 institutions respectively.
• Bachelor’s programmes comprise of 78% of the total sanctioned strength for all programmes.
• More than half the seats remain vacant in programmes other than the Bachelor’s programme (as per
2019 data).
• There are 9 respondent institutions that offer PhD. programme in textiles. The names of the
institutions and their respective sanctioned student intake are presented in the following table:
Table 20.2: Institutions/ Universities offering Ph.D. programmes in textiles (2019)

S. Name of Institutions/Universities Sanctioned Students who passed
No. strength out in 2019
1 Shri Vaishnav Vidyapeeth Vishwavidyalaya, Indore 8 0
2 DKTE Textile & Engineering Institute, Kolhapur Open 3
3 Kumaraguru College of Technology, Coimbatore Open 2
4 MLV Textile and Engineering College, Bhilwara 8 0
5 University of Calcutta, Department of Jute and Fibre 12 3
Technology (erstwhile-Institute of Jute Technology)
6 Uttar Pradesh Textile Technology Institute, Kanpur 14 0
7 The Maharaja Sayajirao University of Baroda, Vadodara 34 2
_______________________________________________________________________________________________

___________________________________________________________________________________________________
8 Anna University, Chennai Open 3

9 IIT Delhi 120 11
Total 196 24
20.2.1 Faculty strength and its break-up

Figure 20.1: Distribution of faculty placed in various positions
Lecturers Guest/Adjunct faculty

3% 13%
Professors
17%
Assistant Professors Associate Professors

49% 18%
Of the 380 faculty members across 31 institutions, 188 are Assistant Professors, 67 are Associate Professors,
65 are Professors, 12 are Lecturers and 48 are Guest/Adjunct faculty.
20.2.2 Faculty resources

The faculty resources are an important indicator of adequacy of required number of learning resources
available to the students. The following table presents the ratio of number of students per faculty in 2019.
The data highlights that there was one teacher (including guest/adjunct faculty) for every 27 students and
one teacher (excluding guest/adjunct faculty) for every 31 students.
The All India Council for Technical Education (AICTE) has fixed 1:15 faculty-student ratio for deemed
universities, autonomous colleges and accredited engineering colleges.
Table 20.3: Faculty resources (2019)

Total faculty strength Total sanctioned number of
students
Total Number 380 10258
Number of students per faculty (including guest/adjunct faculty): 27
Number of students per faculty (excluding guest/adjunct faculty): 31
Calculation is based on sanctioned student strength as follows: (2134 x 4) + (375 x 2) + (243 x 4) divided by 380.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
20.2.3 Library resources

Books, journals, research reports and other resources of the library play a key role in knowledge conservation
and dissemination. The following table gives an aggregate view of the library resources of the participating
institutions.
Table 20.4: Library Resources

Number of Number of international Number of national journal
books journals subscriptions subscriptions
Total number 146949 2164 477
20.2.4 Funded/Sponsored Projects (2015-2020)

Figure 20.2: Funded / sponsored projects undertaken by Academic Institutions (2015-2020)
Institutes reporting no projects Institutes reporting projects
87 Projects
worth
58% 42%
Rs. 108
Crores
It was observed that 13 (42%) out of 31 academic institutions were involved in funded/sponsored projects
during 2015-2020. The names of such institutions and the titles of the funded/sponsored projects are
presented in Table 20.5. The total number of projects (top ten in terms of value) undertaken by these 13
universities is 87, and the project funding for these amounts to Rs. 108 Crores.
Table 20.5: Funded/sponsored projects reported by Academic Institutions (2015-2020)

S. Name of Academic Important projects undertaken
No. Institution/ University
Department
1 College of Engineering and Enhancing light fastness of dyed Nomex Fabric by Nano-Dyeing
Technology, Bhubaneswar
2 Institute of Chemical Modification of synthetic fibres and their colouration
Technology (ICT), Mumbai
Development of mosquito repellent textiles
Product development through wet processing
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Covalently coupled pentacene dimers: novel materials for organic

photovoltaics
Biodegradable flame retardants
Phenanthroline-ly coupled tetracene dimers: novel materials for organic
electronics
Novel reactive dye system based on diazonium salts
Development of triple-layered nanofibrous bandages as a wound
dressing material
Development of new generation high-performance auto responsive green
textile through renewable energy resources
Singlet fission via extended aromaticity of azacenes: (sfeaa) novel material
for potential solar cell applications
Product development through wet processing
Evaluation of the efficiency of natural dye formulation as hair dye
Development of specialty chemicals
Research & development of specialty chemicals using biotechnology
3 Kumaraguru College of Development of characterisation of banana peel protease-based wound
Technology, Coimbatore dressing material for genital warts
Development of flame retardant home textiles with self-cleaning and
antibacterial properties
Design and fabrication of computerised dynamic knittability tester for
hosiery yarns
Development of self-cleaning finish in home textile material
4 Indian Institute of Carpet Development of woven carpets in terry pile structure loom in hand
Technology, Bhadohi made carpet perspective
Application of jute material in hand-made carpets
Promotion of handmade carpet through improved and predictable wear
performance of handmade woolen carpets
Promotion of handmade carpet through incorporation of tug reed
mechanism in handloom
Promotion of handmade carpet through optimum utilisation of Indian
wool in hand made carpets
Promotion of handmade carpet through development of vertical
mechanised durry loom
Promotion of handmade carpet through incorporation of jacquard
mechanism for designing of pile carpet
Promotion of handmade carpet through development of continuous
tufting system
Promotion of handmade carpet through survey-based database and
studies on process standardisation for woolen/semi-worsted yarn
manufacturing
Studies on silk carpets
5 DKTE Textile & Engineering Cluster Management Technical Agency (CMTA) for power loom mega
Institute, Kolhapur cluster scheme
Centre of excellence in nonwovens
MODROB - Development of textile chemistry laboratory
Focus Incubation Centre in coated technical textiles
Entrepreneurship Development Cell (EDC)
Research & Development project – Development of spinning waste
_______________________________________________________________________________________________

___________________________________________________________________________________________________
linen fibre-based nonwovens for technical textiles applications

Research promotion scheme-study of lubricants used in textile
machines
MODROB-procurement of wet spinning machine
Development of textile chemistry laboratory-upgradation of textile
chemical processing laboratory
6 Uttar Pradesh Textile Wastewater effluent treatment by using PPy (polypyrrole) based nano-
Technology Institute, Kanpur clay composites
Insulating materials development and evaluation
Development of antimicrobial textiles using biowaste: synthesis and
characterisation
7 Dr. B. R. Ambedkar National Design of fabric tensile impact testing machine
Institute of Technology,
Optimisation of pulse cleaning parameters for achieving high-level
Jalandhar performance of filter media during industrial pollution control
Designing of wet abrasion tester
Design of pulse jet filtration
8 K. S. Rangasamy College of Design and development of anti-diabetic herbal medical suture
Technology, Namakkal
9 NITRA Technical Campus, Development of electronic drape meter based on image analysis
Ghaziabad technique
Development of fabric smoothness tester
Development of smart protective textiles for firefighters, soldiers and
old-age people
Development of protective work-wear for cement porters
Development of multi-layered flame & thermal resistant fabric for
firefighter clothing
Development of value-added product from different fibres in Himalayan
region
Development of improved version of body protector used for riots
control
Development of air cleaner home textiles to reduce indoor air pollution
Development of technical textiles products in the field of feminine
hygiene
10 IIT Delhi Development of soft body armour using shear thickening fluids
Development of multi-layered coated and laminated fabric for aerostat
hull material
Design and development of laminated fabric for high altitude airship
Design and development of extreme heat protective clothing
Extreme cold weather clothing for defence personnel
Direct 3D bio-printing strategies to study articular cartilage
development, degeneration and regeneration
11 Anna University, Chennai Development of centrifugal spinning machine prototype for production
of nanofibres and its application in tissue engineering
Fabrication of biomimetic nerve guide by a facile ultrafine fibre spinning
method
Design and development of novel microfibre spinning assembly for
health care application
Development of aerosol filters using silica aerogel and textile
composites
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Bulk scale sustainable salt-free exhaust dyeing on cationized cotton knit

fabrics
12 University of Calcutta, Coating/finishing of textile, based on jute and other natural fibres for
Department of Jute and Fibre technical applications
Technology (Erstwhile-
Development of eco-friendly natural fibre-based textile (Oekotech
Institute of Jute Technology,
products) with simultaneous natural dyeing and natural finishing and to
Kolkata establish natural dye /finish mark
Design and development of jute-cotton blend based nonwoven fabrics
for potential uses as surgical disposable (SD), medical packaging (MP)
and medical disposable baggage (MDB) materials
Development of products from Himalayan Indian nettle
Standardisation of fire-retardant finish for jute fabric
Design and engineering of industrial wipes for potential application in
fluid absorption
Development of bags made from jute fabric aluminum foil laminate for
packaging of tea
Design and engineering of jute and jute blended combined fabrics and
its suitable after-treatment to develop Geomembrane and tarfelt for
potential use
Designing, engineering and application of jute based Agrotextiles: a
bio-engineering measure for soil and water conservation and fertility
enhancement of the barren and baid lands of Purulia, West Bengal,
India
13 Department of Textile Centre for excellence for Industrial Textiles (Indutech)
Technology, PSG College of
Focus Incubation Centre (FIC)
Technology, Coimbatore
Development of jute/jute blended fibrous mat for effluent filtration
applications
Recycling of textile industrial waste as value added composite materials
Design & development of electro-active sensor fabrics (body kinematics
and vital signs)
Development of antimicrobial suture using PLLA fibres spun (dry-jet-
wet spinning)
MODROB in textile chemical processing laboratory
Development of durable antimicrobial face mask using natural fungal
extract
Development of active sportswear using bi-layer knitted fabrics
Development of antimicrobial silk suture materials
Development of oil sorption and sound absorption pad using natural
fibre based non-wovens textiles for sustainability
_______________________________________________________________________________________________

___________________________________________________________________________________________________
The following chart presents segment-wise distribution of the projects undertaken by the academic
institutions:
Figure 20.3: Segment–wise distribution of 87 funded / sponsored projects in last six years (2015-2020)
Meditech, 10%
Oekotech, 5%
Clothtech, 7% Hometech, 5% Packtech, 3%
Protech, 5%
lndutech, 10% Smart textile, 2%
Antibacterial
textiles, 2%
Oekotech, Packtech,
2%
Multiple Segments,
22%
Clothtech, Hometech,
27%
The above figure shows that the highest number (16) of projects are in Hometech segment with a total
project value of Rs. 7.50 Crores. Other major segments with such projects are Protech at 15%, Meditech at
14%, Indutech at 13% and Clothtech at 12%.
In four segments – Agrotech, Buildtech, Geotech and Sportech, the academic institutions reported one funded
project each during the period 2015-2020.
20.2.5 Machines and equipment worth more than Rs. 5 Lakhs each,
installed in last three years (2017-2020)
Figure 20.4: Machines and equipment installed in the years 2017-2020
Institutes not invested in machinery Institutes invested in machinery
63
Machines
installed,
68% 32% which
cost
Rs. 10
crores
_______________________________________________________________________________________________

___________________________________________________________________________________________________
There are 10 academic institutions that reported having installed 63 machines and equipment worth more
than Rs. 5 lakh each related to technical textiles in the years 2017-2020.
The total cost of all the machines and equipment installed is around Rs. 10 Crores.
20.2.6 Placement of Students

Number of students placed in the industry over the past five years is as follows:
Table 20.6: Number of students placed in conventional textiles and technical textiles sector
(2015- 2019)
Year Total number of students Total number of Total no. of Percentage of
placed in conventional students placed in students placed students placed in
textiles industry technical textiles each year technical textiles
(A) industry (C = A +B)
(B)
2015 992 41 1033 3.9
2016 902 34 936 3.6
2017 943 43 987 4.4
2018 864 67 931 7.2
2019 834 41 875 4.7
Total 4535 226 4762 4.7
Based on the responses received during the survey, over the past five years the number of students pursuing
technology and engineering programmes in the field of textiles has declined. Only one in 25 students was
placed in the technical textiles industry. Approximately 48% students got jobs through campus placements in
2019.
20.2.7 Patents Granted

Information furnished by the academic institutions with respect to patents applied for and granted is
summarised in the following table:
Table 20.7: Patents related to technical textiles products/ machinery/ raw materials
for the period 2015-2020
S. No. Category National International Total
1 Patents applied for and under consideration 32 7 39
2 Patents granted 14 3 17
Total 46 10 56
With respect to patents applied for, a greater number of patents have been applied for domestically as
compared to those with international agencies. Domestic patents as a percentage of total applications were
82.05%, whereas international patents as a percentage of total applications are 17.94 percent.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
20.2.8 Number of publications (2015-2020)

Table 20.8: Number of publications (2015-2020)
S. Type of 2015 2016 2017 2018 2019 2020
No. publications
1 Journal articles 216 208 314 242 222 227
2 Research reports 3 6 8 10 7 2
3 Books 5 9 5 5 8 5
4 Others (Book 27 11 22 42 38 20
chapters, Working
papers, etc.)
Total 251 234 349 299 275 254
20.2.9 Start-ups in technical textiles supported by Academic

Institutions/University Departments
To encourage entrepreneurs and to promote innovations in technical textiles, many academic institutions are
supporting start-ups. These efforts are summarised as follows:
Table 20.9: Products of the start-ups reported by respondent institutions (segment-wise)

Segment(s) Products of the start-ups
lndutech Industrial export fabric manufacturing, warp preparation unit for specialised fabrics, patterning & garment
stitching, manufacturing of utilities for textiles
Meditech Medical textiles, compression measurement device for bandages, facemask and antibacterial water container
Oekotech Technical sorbent sheet, eco-friendly bags
Packtech Water resistant biodegradable cotton/jute bag for shopping and other purposes, Bag based on jute fabric
aluminum foil laminate for distribution of Prasadam at Devasthanam of Tirupati, Tirumala Trust
Protech Textile mobile application, Intelligent parking solution
Clothtech, Woven fabric, knitted garments, printing of fashionable fabric required for apparels, garment washing with
Hometech value added finishes, body shape garments, waste recycling unit, manufacturing of single end sizing, novelty
embroidery designs, reed cleaning equipment for loom, manufacturing of compact warp patterning device,
water governance equipment, garment finishes, kids wear, household textiles
Smart textiles Posture monitoring device
Various Modification of plain power loom in to shuttle less technology, manufacturing of sample weaving machine,
Segments fabric manufacturing, manufacturing of innovative flexible rapier weaving Machine " Wayan", manufacturing
of warp connect technology, warp preparation and welding device, modification of plain power loom into
shuttle-less technology, geographical patent provider, control systems
Note: The information presented above is based on data provided by Kumaraguru College of Technology Coimbatore, Jawahar Lal Nehru Government
Engineering College, Sundernagar, Guru Nanak Dev University, Amritsar, DKTE Textile & Engineering Institute, Kolhapur, IIT Delhi, University of Calcutta,
Department of Jute and Fibre Technology, and PSG College of Technology, Coimbatore
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Figure 20.5: Segment-wise bifurcation of technical textiles-related start-ups
There are 7 institutions which provided details of the start-ups being supported by them. Total number of
start-ups reported is 41 out of which 11 start-ups are from Clothtech and Hometech combined.
There was one start-up each in the domain of smart textiles and antibacterial textiles.
20.2.10 Skill gaps in technical textiles education in India

The primary survey also tried to capture skill gaps prevalent in the technical textiles sector. Listed below are
some skill gaps identified by the respondent institutions.
Figure 20.6: Major skill gaps in textile education and ways to address them as reported by respondents
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Major skill gaps
Related to industry interaction:
• There is very limited collaborative industry-academia interaction as evidenced by small number of

industry-oriented projects, few opportunities for students and faculty for practical exposure to industry
and lack of significant financial support by industry to academia for R&D
• Lack of technical textiles machine development projects
Related to research and manufacturing:
• When compared with those in other countries, technical textiles workforce in India has received very
little skill training for manufacturing and marketing technical textiles. Less than 5% of employees in
technical textiles industry have attended any formal training compared to similar employees in other
nations (UK: 68%, Germany: 75%, USA: 52%, Japan: 80% and South Korea: 96%)
• Lack of training and encouragement for developing prototypes
• Limited practical knowledge about technical textiles, the associated processes and reverse engineering
of products
• Lack of awareness of recent developments in technology and manufacturing equipment
Related to new talent in the industry:
• Shortage of trained faculty
• Inadequate knowledge exposure about recent products and applications of technical textiles
Methods to address the skill gaps
The following steps were suggested by the respondents to fill the skill gaps:
Related to industry interaction:
• More effective formal mechanisms to improve the opportunities and quality of interaction between
industry and academia must be established
• Frequent and more productive visits of students and faculty members to manufacturing plants/
research facilities must be ensured so as to provide them with greater exposure to the industry
• Number of funded/industry sponsored projects need to be increased
• Technical textiles associations and other industry bodies should increase their engagement with
academic institutions
Related to research and manufacturing:
• Promote industry to sponsor research in academic institutions
• Provide government support for development of prototypes
• Promote inter-disciplinary research in academic institutions for design and development of machinery
useful for production of technical textiles products
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Related to new talent in the industry:
• Offer specialisation in technical textiles at the UG/PG level with adequate number of choice of subjects
in the curriculum
• Setup more COEs and improve the research ecosystem
• Conduct more industrial training programmes for students in technical textiles companies
• Conduct training programmes incorporating industry training for faculty for updating their knowledge
and skills
20.2.11 Technology gaps in textile education in India

Figure 20.7: Technology gaps in textile education and ways to address them as reported by respondents
_______________________________________________________________________________________________

___________________________________________________________________________________________________
In the context of technology gaps in textile education, the following suggestions were made:
Related to high dependence on imports:
• Machinery: At present, most of the machinery that is used to manufacture technical textiles products
is not available in India and has to be imported. The R&D institutions have been unable to make a
significant contribution towards designing and developing machines and equipment locally. This has
placed Indian technical textiles manufacturers at a relative competitive disadvantage vis-à-vis
manufacturers of technical textiles from other countries
• Raw material: India relies heavily on imported specialty fibres, which are raw materials for technical
textiles. The technical institutions have been unable to help Indian industry in developing specialty
fibres indigenously
Related to promotion of innovation:
• Natural fibres such as bamboo, jute, sabai grass, coir and banana fibres, are commonly available in
many parts of India but these have still not been used for developing innovative products
• There is lack of adequate number and capacity of testing laboratories. This compromises the
capability of disseminating and ensuring globally acceptable standards for Indian products and
processes
• There is lack of inter-disciplinary collaboration for developing smart textiles for various applications
Methods to address the technological gaps:
Related to high dependence on imports:
• Machinery: TMMA must work with GoI to formulate special schemes that can be launched to
encourage manufacturing of machinery in India to substitute imports
• Raw material: Incentivising collaboration between interested Indian manufacturer-entrepreneurs and

international manufacturers of high-performance speciality fibres. This can create manufacturing
capabilities locally and reduce dependence on imported raw material for technical textiles
Related to Innovative Applications:
• Vested groups must be constituted to catalyse the development of technology and processes for using
natural fibres such as bamboo, jute, sabai grass, coir and banana fibres, for developing innovative
technical textiles products
• Additional investment must be encouraged in public, private or joint sector to augment the number
and capacity of testing laboratories to help in adoption of globally acceptable standards
• Groups must be facilitated by GoI so as to promote inter-disciplinary working for developing

innovative textiles for various applications such as wearable electronic textiles, textiles for energy
storage, flexible displays antenna, super-capacitors, super-absorbent, super repellents, universal
antiviral mask/ PPEs and indigenous FR textiles
_______________________________________________________________________________________________

___________________________________________________________________________________________________
20.2.12 Emerging areas identified by academic institutions

Heads of most of the respondent institutions identified Meditech as the most promising area in technical
textiles, followed by Geotech. The responses about the emerging areas in the order of priority are presented
in the table below:
Table 20.10: Emerging areas in global technical textiles education where Indian Institutes
/ Universities must focus
S. No. Upcoming areas
1 Developments in implantable and extracorporeal devices
2 Smart/Intelligent textiles
3 Developments in advanced and new textiles (spacer/3D fabrics) for applications in technical textiles
4 Developments in varieties of composite materials
5 Quick Curve Ruler (QCR) Textiles, SpaceTech, Clothtech, Oekotech, e-textile, Nano fibre technology,
Disposable Technical textiles, Sustainable products and processes
6 Developments in specialty finishes to be required for different end-use applications
7 Waste management, Use of Internet of Things (IoT), Filtration Technology, Performance Textiles,
Marine textiles, Coating and lamination, 3D printing, Machine and product design, Inkjet printing
Potential areas for enhancing technical textiles education in India:
• Education about products in protective textiles
• Education about innovative Smart textiles/intelligent textiles is going to gain prominence over the next
few decades.
• Multi-disciplinary education, collaborative research, research to develop flexible electronic substrates

and components that would allow integration and maintain the natural flexibility of fabrics
• Education and research about cost-effective manufacturing techniques and processes
Methods to promote education in upcoming areas of technical textiles:
• Support efforts that promote better collaboration between academic institutions and TRAs, other research
associations, especially for advanced nonwovens
• Establish centres for electronic textiles with financial investment by GoI along with active participation of
leading industrialists and research and training institutes
• Provide adequate training to our technocrats for better understanding and appreciation of manufacturing.
This will improve our country’s capability to utilise facilities to manufacture different types of textile
material
_______________________________________________________________________________________________

___________________________________________________________________________________________________
20.2.13 Challenges faced by academic institutions and universities in

imparting education related to technical textiles
Academic institutions face certain challenges in imparting education related to technical textiles. These
challenges are presented in the following table:
Table 20.11: Challenges faced by Indian academic institutions in imparting technical

textiles education
S. Parameter Challenges
No.
1 Workforce Scarcity of competent and trained faculty
Lack of expertise about latest developments in the field among faculty members
Shortage of qualified support staff
2 Laboratory Scarcity of competent and trained faculty
Lack of laboratory facilities for imparting appropriate education about technical textiles
Lack of modernisation of facilities (Specialty equipment & characterisation instruments,
miniature technical textiles machines)
Shortage of laboratory technicians to impart practical training related to technical textiles
3 Collaboration Inadequacy of Industry-Academia partnerships
4 Funds Financial constraints
5 Resources Lack of latest machinery and instruments
Resources (books, library journal subscriptions, software, prototypes) are limited
Absence of a robust R&D eco-system, infrastructure, and funding avenues
6 Courses Lack of courses being offered in technical textiles, significant obstacles faced while changing
the curriculum as approval process is cumbersome
7 Jobs Shortage of recruiters from the field of technical textiles
8 Awareness Lack of awareness among prospective students and their parents about technical textiles
The institutions have suggested following methods to overcome the challenges in imparting education related
to technical textiles:
Related to support required from the Government:
• Support acquisition of latest machines and instruments for technical textiles
• Support increased collaboration between industries with institutes
• Support training of faculty members and technicians in latest knowledge and practices in the field of
technical textiles
• Support funding of research projects so as to improve capabilities of development of machinery and

material related to technical textiles
• AICTE and UGC need to be sensitised about the need of academic institutions to have a revised
curriculum that has courses related to latest developments in technical textiles
• Incentivise entrepreneurs to establish and expand production capacities of technical textiles
_______________________________________________________________________________________________

___________________________________________________________________________________________________
• Organise exhibitions, conferences and seminars with stakeholder participation from the global
technical textiles value chain
Related to institutions:
• Introduce changes in curriculum towards specialisation in technical textiles
• Share faculty and laboratory technicians to temporarily mitigate shortages
• Incentivise faculty members for taking up research or international teaching assignments
• Encourage better exposure of faculty through exchange programmes with world’s leading institutes
• Enhance competencies for design and development of machinery and raw material usage
• Encourage collaboration of institutes for testing facilities, research projects, online sharing of e-
journals and books to address institute level shortages
Related to industry-academia interaction:
• Encourage collaboration between industry and academia for application-oriented projects
• Establish good laboratories in Public-Private-Partnership (PPP) mode
• Encourage industry to host visits, involve students and faculty in live projects, training and internship
of the students and faculty members
20.2.14 New programmes and courses related to technical textiles

that academic institutions and universities must offer in the coming
future
Table 20.12: New programmes related to technical textiles that Indian Institutes /
Universities must offer in future
Programme Background Courses
B.Tech. in Textile Students will complete 15-20 credits from this basket
engineering/ textile the basic textile 1. High performance and functional fibres
technology/textile subjects till the sixth 2. Advanced finishing & nanotechnology
chemistry/ man- semester. The final two
3. Protective textiles
made fibre semesters will focus on
technology with technical textiles 4. Medical textiles
specialisation in subjects 5. Industrial textiles
technical textiles 6. Geotech and agro textiles
7. Fibre-reinforced composites
8. Functional and Smart textiles
9. Testing and characterisation of technical textiles
10. Standards and specifications of technical textiles
11. Project on technical textiles
_______________________________________________________________________________________________

___________________________________________________________________________________________________
M.Tech. in Textile Students will pursue 12-15 credits from this basket
engineering/ Fibre M.Tech. level courses 1. High performance and functional fibres
Science/ Textile of respective stream 2. New materials and innovations in technical textiles
chemical processing and they can earn
3. Coating and lamination
with specialisation certain number of
in technical textiles credits (12-15) as 4. Advanced finishing
electives to get a 5. Nanotechnology
specialisation in 6. Protective textiles
technical textiles 7. Medical textiles
8. Industrial textiles
9. Geotech and agrotextiles
12. Advanced testing and characterisation of technical
textiles
M.Tech. in An interdisciplinary 1. High performance and functional fibres
Technical textiles M.Tech. programme 2. New materials and innovations in technical textiles
open to students with 3. Advanced nonwovens and knitting
undergraduate degree
4. Design of technical textiles
in textile/
polymer/mechanical/ 5. Coating and lamination
chemical/ materials 6. Advanced finishing
science 7. Nanotechnology
8. Protective textiles
9. Medical textiles
10. Industrial textiles
11. Geotech and agro textiles
12. Home and Sportech textiles
15. Advanced testing and characterisation of technical
textiles
_______________________________________________________________________________________________

___________________________________________________________________________________________________
20.2.15 Suggestions to strengthen technical textiles education

Figure 20.8: Mechanisms to strengthen technical textiles education
Key Findings:
Related to programmes and curriculum:
• Introduce more courses related to technical textiles at Diploma, Undergraduate and Postgraduate
levels
• Incorporate industry-oriented practical/ project work with the help of industry professionals
Related to industry support:
• Inclusion of personnel from the industry as essential stakeholders in academic institutions right from
guest faculty level to course advisors to board members
• Sponsor Focused Incubation Centres for technical textiles related fields
• Introduce industry-sponsored faculty chair positions
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Related to infrastructure requirements:
• Augment funds to modernise and upgrade current laboratories and workshop facilities in institutions
• Set up machines with very high capital investment with complete GoI assistance
• Establish special laboratories for smart and innovative textile materials
• Establish centralised laboratory facilities that can be utilised by research scholars against payment of
fees
Related to research:
• Incentivise high quality application-based research and get these published in reputed research
publications
• Encourage filing of patents in high priority technical textiles areas
• Encourage collaborative research projects among CoEs, IITs, NITs, and other research organisations
• Encourage sharing of e-journals, books and research work among institutes
Related to students:
• Promote student exchange programmes with reputed international institutions
• Promote international exposure by providing GoI assistance for participation in international events
like DOMOTEX, ITMA and exchange programmes with foreign universities
Related to faculty:
• Recruit faculty with relevant industry experience
• Provide hands-on industry experience to interested faculty at reputed technical textiles industries
• Encourage faculty training and exchange programmes with foreign universities
• Conduct short-term Faculty Development Programmes (FDPs) in technical textiles
• Engagement of industry professionals to augment in-class teaching
_______________________________________________________________________________________________

___________________________________________________________________________________________________
20.2.16 Support from TRAs

Figure 20.9: Expectations from TRAs by academic institutions
Resource
Sharing
Promoting Knowledge
research Dissemination
Expectations
from
TRAs
Industry Policy and
collaboration governance
Skill
Development
Expectations from TRAs by academic institutions
Related to resources-sharing:
• Sharing of testing, production, evaluation facilities at TRAs with institutes at nominal charges
• Establish an online platform that can help researchers access pan-Indian TRA resources
• Develop and share segment-specific case studies to teach students
Related to knowledge-dissemination:
• Incentivise and hold mandatory industrial training programmes
• Provide technical know-how of products and technology to users
• Share information on new products and their development with user industries
• Publish regular periodicals about progress and challenges faced by Indian technical textiles sector
• Create awareness about technical textiles development and related government policies
• Provide support through regular market surveys and statistics
• Conduct workshops, conferences and trainings on various fields of technical textiles
_______________________________________________________________________________________________

___________________________________________________________________________________________________
• Encourage students by providing structured training, sponsoring projects and organising seminars,
conferences and competitions
• Organise international events and exhibitions
• Share research work in the area of technical textiles with institutes/research scholars
• Play a key role in motivating faculty members and students
Related to policy and governance:
• Sign MoUs among industry-government and institutions with clear deliverables
• Create awareness about technical textiles development and related government policies
Related to skill development:
• Permit internships in technical textiles for UG and PG students
• Encourage visits to TRAs
• Allow teaching staff/ research staff from institutions to work in production, testing, marketing in
technical textiles during academic breaks
• Co-guide interns/ PG students along with faculty supervisors
• Encourage collaborative research and projects with institutes in the area of technical textiles
Related to industry-collaboration:
• Create and maintain strong linkages with industry for identifying research areas and solutions
• Promote industry-sponsored research
• Collaborate with industries to design and develop textile machinery to produce quality products
• Encourage industry practitioners to take up part-time/guest teaching at academic institutions
Related to promoting research:
• Establish Incubation Centres
• Encourage collaboration with foreign institutes/laboratories
20.3 Best Practises of Premier International

Universities
The findings from the primary survey of Indian Academic institutions offering textile engineering and
technology related programmes reveals their strengths as well as areas of improvements. An examination of
best practices of premier universities in this field globally can offer some ideas about what changes can be
introduced to address the areas of improvement and to reinforce the strengths.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
For this purpose, the following five premier foreign universities offering textile engineering and technology
related programmes were identified based on inputs from faculty experts at IIT Delhi:
• Donghua University, China
• Leeds University, UK
• North Carolina State University (NCSU), USA
• RWTH Aachen University, Germany
• Technical University of Liberec (TUL), Czech Republic
Information was gathered from multiple secondary sources and analysed to identify the best practices. The
findings of and an account of the best practices is presented in the following paragraphs.
20.3.1 Design of Courses

Premier universities where education in textile engineering and technology is imparted permit their students a
high degree of flexibility in selecting the subjects that they wish to study. Students can design the curriculum
that they wish to pursue. For example, in North Carolina State University (NCSU), USA, students can pursue a
specialisation in any of the areas in technical textiles even at the undergraduate level. The mandatory subjects
that the students have to pursue also include many subjects from the field of technical textiles apart from
conventional textiles. The following table lists the subjects from the field of technical textiles that are offered
in some of the world’s premier universities in textile engineering and technology.
Table 20.13: Courses in subjects related to technical textiles offered in world’s premier
universities
S. No. Premier University Courses related to technical textiles
1 Donghua University, China • Bio-medical materials
• Industrial textiles
• Composite materials
• Textile physics
2 Leeds University, UK • Research methods
• Advanced textile technology
• Advanced composites
• Technical and biomedical textiles
3 North Carolina State University (NCSU), • Medical textiles
USA • Technical textiles
• Textile supply chain operations
4 RWTH Aachen University, Germany • Composites
• Factory planning
• Technical textiles
_______________________________________________________________________________________________

___________________________________________________________________________________________________
20.3.2 Research projects by students

Courses at these premier universities are relatively more focused on research, internships, industry
experiences and design projects. Some of the examples are artificial blood vessel development, design of
novel water filtration units for remote villages and design of structures to protect astronauts from radiation
while on the moon. The students work closely in peer groups, access expert guidance from faculty from
across the world, as well as interact with relevant professionals in science and technology. The exposure that
the students get prepares them better for designing and producing innovative solutions in the field of
technical textiles. The table below presents some of the application-based research projects undertaken as
part of student education in NCSU.
Table 20.14: Indicative list of research projects by students at NCSU

University Sponsor of summer project Project title
NCSU (North Carolina State Lear Corp. Natural FibreFibre Wovens for
University), USA Automotives
NuFabrx New frontiers for drug delivery using
textile drug delivery
Gildan Activewear Inc. Cool socks for athletes
Carpe On-the-Go Sweat Towel
20.3.3 Industry-Academia collaboration

In most of the developed countries of the world, formal technical education has a large component of
industrial training. Premier universities themselves own businesses as well as incubate businesses. These
universities also enter into formal agreements to collaborate with industrial organisations. All such initiatives
offer several opportunities to students to undergo practical training and develop their skills for actual hands-
on work that prepares them for a future in engineering and technology. The following table lists some such
prominent industry-academia collaborative arrangements at these universities.
Table 20.15: Some recent industry-academia collaboration arrangements in premier universities

S. No. University Company/University in Description
collaboration
1 Donghua University China Uster Technologies Every year, two students of the Masters
programme have an opportunity to work with
specialists at USTER to gain practical
knowledge and experience to improve the
research part of their Masters thesis
Sino-Japan Medical textile Share information on textile medical fibres,
forum textile-based medical devices, anti-coronavirus
nano materials, high-performance mask
production technology, medical textiles repair
materials and other topics
2 North Carolina State Avery Dennison To explore introducing technology as part of
University, USA their capability enhancement, students at the
university were asked to explore various print
methods, specifically with regard to Avery
Dennison’s Printed Fabric Label (PFL) division
_______________________________________________________________________________________________

___________________________________________________________________________________________________
for incorporating greater stretch into the

fabrics
Gildan Activewear Inc. To create measurably cooler athletic socks
with long lasting cooling properties to help
keep the wearers cool and dry, thereby
improving their athletic performance. As of
today, there are no true cooling socks on the
market, and this may be attributed to a couple
of challenges this study serves to address
3 Leeds University, UK Stockholm University Greener approaches for waterproof clothing
Royal College of Art, Many projects to give a boost to creative
Burberry Wools of New innovation in the textile and fashion industry
Zealand, Abraham Moon are being spearheaded by the University of
and Sons, Textile Centre Leeds
of Excellence Camira
4 RWTH Aachen University, Carl Weiske GmbH & Co. BioBase project with an aim to establish bio-
Germany KG. based polymers in the textile industry and to
HUESKER Synthetic GmbH demonstrate their full potential
Atlan-tec Systems GmbH, AutoNoM – Automated model building and
Willich analysis of nonwoven production by using
machine learning
Philadelphia University, Projects on new generation “ 4D-textiles”.
USA
Aachen-Maastricht Projects on Implantable medical textiles
Institute for Biobased
Materials and BioTex
Korea Institute of Projects on Smart living product with Internet
Industrial Technology of Things (IoT),’ ‘Textile fashion with wearable
(KITECH) technique’.
20.3.4 Establishment and effective working of innovation centres

University of Leeds has 3D Weaving Innovation Centre which is part-funded by the European Regional
Development Fund. It aims to expand research in the area of textile technology by developing advanced 3D
woven structure prototypes for a wide range of sectors from fashion, healthcare to aerospace. As a result of
this innovation centre, the School of Design at Leeds University has become a leader in 3D Weaving
technology, design, and production. Similarly, other premier universities also have innovation centres that not
only foster research and innovation but also provide opportunities to students for participation in workshops,
training programmes and seminars. The information provided in the following table offers a list of some such
innovation centres.
Table 20.16: Innovation centres in premier universities

S. Premier University
Innovation centre
No.
1 Donghua University, China • Technological Development Center of Agricultural
Textile
• Technology Development Center of Textile Material
for Biomedicine
2 Leeds University, UK • 3D innovation centre
3 North Carolina State University (NCSU), USA • Textile Protection and Comfort Center (TPACC)
_______________________________________________________________________________________________

___________________________________________________________________________________________________
• Zeis Textile Extension

4 RWTH Aachen University, Germany • Carbon reinforced concrete collaborative research
centre
20.3.5 Scholarships
North Carolina State University (NCSU) in USA has the highest percentage of students participating in its
scholarship programmes and more than 50 percent of all textile engineering students receive scholarship
support. The following table contains information on some of the scholarships.
Table 20.17: Scholarships in premier universities

S. Premier University Scholarships
No.
1 Leeds University, UK • Manchester Alumni Scholarship Scheme
• GREAT scholarship
• Equity and merit scholarship
• Global Futures scholarship
2 North Carolina State University • Engineer your programme
(NCSU), USA • Gilman Scholarship
• Jackson Rigney Scholarship
• Ralphe and Ree Edward Scholarship
• Donor scholarship
3 Technical University of Liberec (TUL), • Social Scholarship
Czech Republic • Accommodation scholarship
• Merit scholarship
20.3.6 Exchange programmes

Strong emphasis is placed on collaborations and partnerships with other leading universities for better student
and academic staff mobility and exposure. Short and long duration faculty and student exchange with other
well-known international universities is an important practice followed by premier universities. This practice
allows university students and members of the faculty to learn from good practices of their partner universities
and apply the appropriate practices for development of their own university.
20.3.7 Quality assurance from external sources

Premier universities ensure that they follow high standards and best practices by taking the help of external
auditors and quality consultants such as professionals, statutory, and regulatory bodies. These external
agencies conduct peer-reviewed audits and subject-based reviews, based on the needs of the respective
university. The following table contains information that offers a few examples of such external mechanisms
for monitoring and evaluation.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Table 20.18: External mechanisms for monitoring and evaluation

S No. Premier Monitoring and evaluation panel Objectives of Evaluation Panel
University members
1 Leeds Ed Anderson, CEO, Leeds Bradford airport. The council takes care of the
University, UK Liz Barber, CEO, Yorkshire Water University as a receipt of public funds
Tom Clark, Chief Tech Officer, Lowell group and keeps a track of institutional and
executive performance
2 Technical Dr. Helen Mallison, UK “The International Evaluation Panel” is

University of Prof. Matthias Ziegenhorn, Germany set up for the purpose of evaluation of
Liberec (TUL), Prof. Yardan Kyosev, Germany the university according to the
Czech Republic Methodology for Evaluating Research
Prof. Markus Westener, Rasenburg
Organisations
20.3.8 Student to faculty ratio

Student to faculty ratio is a parameter often used for assessment of quality of an educational intitution.
Premier universities for textile engineering and technology education identified for the present study often
have sufficient number of faculty members which ensures a small and easily manageable class size so that
faculty members can give personal attention to each student.
Table 20.19: Faculty student ratio in premier universities

S. No. Premier University Student to faculty ratio
1. Donghua University, China 18:1
2. Leeds University, UK 11:1
3. North Carolina State University (NCSU), USA 12:1
4. RWTH Aachen University, Germany 19:1
5. Technical University of Liberec (TUL) Czech Republic 10:1
Source: Based on data available on websites of respective universities
20.4 Summary of main findings

India has a number of academic institutions and universities offering undergraduate and postgraduate
programmes related to different areas of textiles. Of the 39 colleges that were contacted for the survey, 31
responded. While all of them offer UG programme(s) in textiles, 16 of them also offer M.Tech. programme(s)
and 9 of them offer Doctoral degrees. Their total sanctioned strength is 2750 students.
Universities and academic institutions are important instruments for dissemination of knowledge and for
encouraging new ideas and innovation. With good exposure to Technical Textile courses during their
programmes and meaningful industry-aligned projects, students can become invaluable assets in the
development of technical textiles industry in India. It is therefore vital that their opinion and feedback is
factored in while making significant decisions, so that they are industry-ready and can play their part in the
development and growth of the technical textiles industry in India.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
20.4.1 Findings related to Skill Gaps

• Limited exposure of the faculty to new emerging areas of technical textiles
• Lack of facilities for producing and testing technical textiles that are required for teaching, training and
implementing projects
• There is very limited collaborative industry-academia interaction as evidenced by small number of
industry-oriented projects, few opportunities for students and faculty for practical exposure to industry,
and lack of significant financial support by industry to academia for R&D
• Limited exposure of faculty to TT production technologies and specialised characterisation techniques
• Shortage of trained technicians for training and operating technical textiles equipment
20.4.2 Methods suggested to address the skill gaps

• More effective formal mechanisms to improve opportunities and quality of interaction between industry
and academia must be established
• Technical textiles associations and other industry bodies should increase their engagement with academic
institutions
• Infrastructure development at the academic level in states in selected technologies and setting up of
testing facilities should be funded
• Organise continuing education programmes for faculty, staff, and people working in the industry
20.4.3 Curriculum related steps suggested

• Encourage more and specialised courses in technical textiles at UG and PG levels
• Start M.Tech. programme in technical textiles at one or two selected institutes
• Incorporate technical textiles courses as core courses for all students at UG level
• Recruit faculty with relevant industry experience
• Provide hands-on industry experience to interested faculty at reputed technical textiles industries
• Encourage faculty training and exchange programmes with foreign universities
• Conduct short-term Faculty Development Programmes (FDPs) in technical textiles
• Encourage industry professionals to take part-time faculty assignments
The comparative analysis of practices of Indian academic institutions with premier international universities
indicates significant scope for improvement of the Indian Academic Institutions across their education and
training methodologies. Technical textiles, being a discipline that is rapidly evolving, will continue to require
man-power that is abreast of the dynamic trends and well-trained in relevant technologies. It is only then that
the academic ecosystem of India comprising academicians, trainers, students, researchers and support staff
will be able to produce graduate and post-graduate professionals who are well equipped to handle the
challenges of the fast-paced changes in technical textiles, and foster innovations that will place Indian
technical textile industry among the global leaders.
_______________________________________________________________________________________________

21. Status and Contribution
of Focus Incubation Centres
21.1 Background
Incubation Centres are established to nurture and assist entrepreneurs, start-ups and early-stage business
groups in developing community, education, linkages, capital and mentorship in a controlled environment to
help them in their initial stages. Incubation Centres provide immediate, local and practical solutions for day-
to-day business problems which arise in an early-stages of business and provide transitory and facilitative
assistance. Services provided by incubators to start-up ventures include access to1
• Physical resources
• Office support services
• Capital
• Process support
• Networking services
The world’s first incubator was Batavia Industrial Centre started by a New York businessman named Joe
Mancuso in 1957. He created readily accessible, short-term lease office spaces for small businesses.2
Incubation Centres have changed their role from time to time to reach their present state. Their evolution is
as follows3:
1950s - 1980s: Business incubators were focused on providing low-cost working space and set of basic
shared services required for a business such as secretarial services, copy and fax equipment, reception,
telephone answering, meeting & conference rooms, car parking and kitchen facilities.
Mid 1980s - Mid 1990s: Along with the services offered previously, knowledge-based services such as
training, coaching, mentoring from domain experts were added to help entrepreneurs start businesses and
learn.
1 Incubation in India: A Multilevel Analysis, Indian Institute of Management, Ahmedabad, March 2020
2 A Brief History of ‘Investability DNA’ in Incubation and Acceleration, Alex Prather, 2018
3 3 The History of Business Incubation, Vasily Ryzhonkov, 2013
_______________________________________________________________________________________________
Section 21: Status and contribution of Focus Incubation Centres
___________________________________________________________________________________________________
Mid 1990s - Present: Along with the above services, the incubation centres help new firms access networks
that ease the acquisition of resources and specialised expertise, provide learning opportunities, and allow new
firms to build up legitimacy faster.
Incubation as a concept found its way into India around 1991 when some of the eminent institutions for
higher education started establishing these centres. The Society for Innovation and Development (Indian
Institute of Science, Bengaluru) was established in 1991 and the Foundation for Innovation and Technology
Transfer (IIT Delhi) was established in 1992. In 2016, Government of India launched Startup India Scheme
to support entrepreneurs, building a robust startup ecosystem with a package of services to promote startups.
As of 2019, there were 13 central government ministries and departments that were supporting incubators.
There are 284 incubators (government supported and private) which have been identified in India.
21.2 From Incubation Centres to Focus

Incubation Centres for Technical Textiles
Ministry of Textiles has setup Focus Incubation Centres (FICs) as a component of Technology Mission on
Technical Textile (TMTT) to help the potential investors enter into technical textiles. Eleven Focus Incubation
Centres (FICs) have been established on plug and play model at a cost of Rs. 59.35 Crores out of which five
Focus Incubation Centres (FICs) have been established in the Centres of Excellence for which Rs.14.45 Crores
have been sanctioned to these five Centres of Excellence. Six Focus Incubation Centres have also been
approved by Empowered Committee at Indian Institute of Technologies (IITs) namely, IIT Kharagpur,
Mumbai, Delhi and Kanpur with a total cost of Rs. 44.90 Crores.4
4 http://texmin.nic.in/sites/default/files/Textiles-AnnualReport2018-2019%28English%29.pdf
_______________________________________________________________________________________________
___________________________________________________________________________________________________
21.3 Progress of the Focus Incubation Centres

The status of progress of the FICs is presented in the following table:
Table 21.1: Progress of the Focus Incubation Centres
S Designated Year of Intended support to Reported progress so far

No. institute for FIC establishment entrepreneurs
1 Ahmedabad Textile 2017 - Focusing on helping - ATIRA has signed an MOU with iCreate
Industry’s Research incubatee International Centre for
enterprises in the Entrepreneurship and Technology
Association (ATIRA),
field of composites Development of
Ahmedabad
- The products that Entrepreneurs for supporting
are being developed incubatees in the area of Focus
have applications in Incubation in July 2017
aerospace, mass - The institute has collaborated with
transportation, various institutes including iCreate
machinery parts, etc. (technology business incubation centre)
along with Entrepreneurship
Development Institute of India (EDII),
National Institute of Design (NID) and
Centre for Entrepreneurship
Development (CED)
- ATIRA has not reported incubating any
start-up so far
2 Dattajirao Kadam 2016 - Monitoring business - 24 start-up proposals have been

Technical Education planning received by the centre of which 14
- Providing technical have been incubated and nine startups
(DKTE), Kolhapur
assistance have successfully received funding from
external sources
- Providing space for
services and training - 16 startups have graduated from the
Centre till date and have their own
- Focusing on
independent establishments
mentoring students
- The scale of operation of the Centre
was Rs. 75,82,876 for the year 2019-20
- Five mentors are actively looking after
the incubation centre
- Training programs organised by the
centre are: Awareness programmes,
Product specific programmes, Industry
personnel training programmes and
Students training programmes
- There are around 10 corporate
partnerships with industries concerned
with technical textiles.
- Major new product development areas
are Geotextile, Filtration, Automobile,
_______________________________________________________________________________________________
___________________________________________________________________________________________________
Carpets, Mattresses, wadding and

quilting
- Six technologies have been patented by
the Centre as of June 2021
3 Northern India 2018 - Focusing on - NITRA has not reported incubating any
Textile Research weaving, knitting start-up so far
and garmenting - Machinery provided by NITRA is being
Association (NITRA),
Ghaziabad - Providing a facility to used for purposes of production of
undertake prototypes and samples
commercial - NITRA also provides testing facility
production
- Providing machinery
for garmenting and
embroidery. These
include latest
cutting, fusing,
sewing and
embroidery
machinery
4 PSG College of 2015 - Focusing on filtration - The incubation centre is equipped with
Technology (PSG), products, coir and full-fledged prototyping facilities for
acoustic materials. developing various products such as
Coimbatore
- Promoting research, industrial filters, insulation materials,
encourage industry coated and laminated fabrics,
to use the machinery abrasives, natural fiber based
installed, take up composites, mattress ticking, ropes and
testing, impart cordages, brushes, etc.
training, and - The centre also imparts training to
manufacture market the products in the respective
products for markets.
commercial use.
- The centre has not reported incubating
any start-up till now.
5 South India Textile - Focusing on medical - The FIC is Dormant/Inactive

Research Association textiles (Meditech)
(SITRA), Coimbatore - Providing essential
machines to carry
out production.
- These machines can
produce sanitary
napkin, face mask,
wet wipes / alcohol
swabs and cotton
wool rolls.
6 Indian Institute of - New generation - Seven startups have been incubated by

Technology (IIT), product the Centre
development - The major infrastructure comprises:
Kharagpur
Graphene production facility,
Microbiological Testing Facility Plant,
_______________________________________________________________________________________________
___________________________________________________________________________________________________
- Promoting biological testing facility, Animal cell-

innovation and based testing facility, Plantation of
institute partnership banana & pineapple for natural fibers
for startups
- Seven workshops have been conducted
7 Indian Institute of 2018 - The Textile Focus - Incubation is yet to take off
Technology (IIT), Incubation Centre - Conducted textile leadership conclave:
(TFIC) consists of Theme: Emerging opportunities and
Mumbai
two centres, Focus markets, IIT Bombay August 23, 2018
Incubation Centre in
Technical Textiles -
IIT Bombay (FICTT)
and Advanced Fiber
Reinforced Polymer
Composite
Development Centre
(AFRPCDC)
8 Indian Institute of - Offering facility - Incubation is yet to take off

Technology (IIT), for 3D Weaving and
Structural
Delhi
Composites used for
testing by
enterprises
9 Indian Institute of - Supporting - No activity reported for technical

Technology (IIT), innovation, research, textiles incubation centre
and entrepreneurial
Kanpur
activities in
technology-based
areas
- Providing services
related to patenting
and
commercialisation
10 Synthetics & Art Silk - Supporting the - The FIC is Dormant/Inactive

Mills’ Research working trials,
Association shopfloor trials, etc.
(SASMIRA), Mumbai - Focusing on
agriculture textiles
(Agrotech)
Source: Information gathered by IIT Delhi
_______________________________________________________________________________________________
___________________________________________________________________________________________________
21.4 Challenges faced by the FICs

The secondary research followed by primary research was conducted for the present study and it shows that
most of the Focus Incubation Centres (FICs) for technical textiles are yet to begin incubating the start-ups.
The FICs of technical textiles can be divided into four categories as follows:
1. FICs that have commenced incubating the start-ups: DKTE, IIT Kharagpur
2. FICs that are providing support to technical textile enterprises irrespective of their being start-ups or
existing businesses: PSG College, ATIRA, NITRA, IIT Delhi
3. FICs that are yet to commence active support services including incubation: IIT Bombay
4. FICs that are dormant/inactive/non-starters: SITRA, SASMIRA
5. FIC for which information could not be obtained: IIT Kanpur
It is evident from the study of functioning of FIC intervention of the Ministry of Textiles that there is a
considerable scope for improvement. Ideally, an incubation centre for technical textiles in order to be effective
has to offer the following services:
i. Help the entrepreneurs with basics of conducting the business
ii. Opportunities for networking with peers, experts, successful entrepreneurs from technical textiles
iii. Training followed by assistance with marketing of the products
iv. High-speed internet access
v. Assistance with accounting and financial management of the business
vi. Training for and access to bank loans, loan funds, etc.
vii. Help with presentation skills especially to investors
viii. Access to higher education resources in the field of textiles and management
ix. Connections with possible strategic partners
x. Access to angel investors or venture capital
xi. Business training programmes
xii. Technology training programmes
xiii. Testing facilities
6. The evidence available from the information gathered about existing FICs suggests that even the two
FICs with maximum progress were able to offer only four services viz. High-speed internet access, access
to higher education resources, technology training programmes and offering testing facilities have been
extended by most of the functional COEs towards incubation of the enterprises. This leaves a vast scope
for improvement even in case of the best performing FICs.
_______________________________________________________________________________________________
___________________________________________________________________________________________________
7. There are four FICs which provide non-incubatee specific services such as training programmes,
participation in industry events, and permitting the use of technical facilities, machines and equipment for
testing, concept development and producing prototypes at affordable charges to all entrepreneurs of this
industry irrespective of whether they are start-ups or not. So, these are useful services but not specifically
targeted to help incubate ventures.
A study of the guidelines for FICs as specified by the Ministry of Textiles states that the following
requirements must be met by the FICs:
i. Industrial sheds with basic infrastructure/basic machineries may be made available to the prospective
entrepreneurs for setting up their units for production on commercial scale.
ii. FICs may be provided to new entrepreneurs on "Plug and Play" model with mentoring by the
concerned CoE for taking up the innovation on commercial scale.
iii. Once they get established, they shall shift to their own facilities and the center will be made available
to new entrepreneurs.
iv. CoEs have to establish the FICs in their area within a time period of six months.
v. There will be separate line of equipment for each entrepreneur.
vi. FICs would be run by entrepreneurs and not the CoEs.
It is apparent from the information that has been gathered that the FICs which have been established so far
are yet to follow the above mentioned guidelines mandated by the Ministry of Textiles.
It is a widely prevalent practice among good incubators that they have a specifically trained and experienced
incubation manager and a team of personnel who assist him. None of the present FICs have such a set of
dedicated personnel in place.
The faculty/personnel of the FICs are assigned the task of mentorship as an additional charge over and above
the regular workload and there is no incentive from the organisation for the extra work that is allotted. This
practice often leads to lack of attention and neglect of the mentoring role. It affects incubation activity
negatively.
Active partnering with technical textile industry is inadequate and this leads to poor connect of the startup
entrepreneur with latest developments in the market.
_______________________________________________________________________________________________
22. Status and Contribution
of Integrated Textile Parks
22.1 The concept of Integrated Technology
Parks
The World Bank and UNCTAD place Science and Technology Parks (STPs) under the category of Special
Economic Zone (SEZ). SEZs are those geographic areas which have independent business rules and which
offer a variety of incentives to attract investors and businesses from a wide range of industries. The STPs are
precursors of industrial and technology parks. The industrial and technology parks are based on the concept
of integration of diverse functions in an identified area with a large financial turnover. The collaborative
actions by firms and facility providers are leveraged to result in substantial collective gain. The introduction of
technology parks in India followed a spate of industrial reforms in Asian countries in the 1980s, where rapid
industrialisation was characterised by the emergence of numerous speciality cities and industrial clusters each
dedicated to a particular product.
22.2 Scheme for Integrated Textile Parks in

India
As per the scheme guidelines released by the Ministry of Textiles, the Scheme for Integrated Textile Parks
(SITP) was launched in 2005 by merging the then existing schemes namely Scheme for Apparel Parks for
Exports (APE) and the Textile Centre Infrastructure Development Scheme (TCIDS). It involves
identification of appropriate locations for textile units so as to meet the geographical, social and
international standards. It provides for funding to private entrepreneurs for setting up textile parks with
world-class infrastructure features.
Under this scheme, Government of India (GoI) has made a provision for giving a grant of up to 40% of the
project cost subject to a ceiling of Rs. 40 Crores. Each Integrated Textile Park (ITP) is proposed to have
upto 50 units. However, the number of entrepreneurs and the resultant investments in each ITP can vary
from project to project. The SITP is proposed to be implemented through the Special Purpose Vehicle
(SPV). SPVs are to be formed with the representatives of local industry, financial institutions, State and
Central Government to support the textile parks. SPVs need to be a corporate body registered under the
Companies Act.
_______________________________________________________________________________________________
Section 22: Status and contribution of Integrated Textile Parks
___________________________________________________________________________________________________
22.2.1 Status of technical textiles focused technology parks in India

The establishment of ‘technical textile focused technology parks’ or ‘technical textile parks’ is a relatively
recent development. Its timeline is as follows:
Figure 22.1: The timeline of technical textile parks in India
Mundra SEZ Vraj Integrated The Great Indian Pallavada Goutham Buddha
Textile & Apparel Textile Park Linen & Textile Technical Textiles Textiles Park Pvt.
Launch of SITP -July 2005
Park Limited- Limited- Infra. Company- Park Ltd- March Ltd- November
October 2005 December 2005 January 2006 2011 2013
As of 12 March 2020, a total of 57 textile parks are under implementation under SITP by the Ministry of
Textiles. All are reported to be completed. Out of the 57 parks, five parks have been sanctioned as being
dedicated to Technical Textiles. One of these five parks, Goutham Buddha Textiles Park Pvt. Ltd. is reported to
be dormant and inactive by its directors and on physical verification. The status of the five parks is presented
in the table below.
Table 22.1: Status of Technical Textile Parks
Number of
S. Name of the Technical Date
Location State Current status functional
No. Textile Park incorporated
units
Goutham Buddha Textile Andhra Sanctioned, Not

1 Guntur 27 Nov, 2013 0
Park Pvt. Ltd. Pradesh completed
Mundra SEZ Textile &

2 Ahmedabad Gujarat 25 Oct, 2005 Completed, Operational 6
Apparel Park Limited
Sanctioned, functional,
Pallavada Technical applied for change from
3 Kolappalur Tamilnadu 2 Mar, 2011 N.A.
Textiles Park Pvt. Ltd. technical textiles to
general textiles
The Great Indian Linen & Sanctioned, Dormant,

4 Chennai Tamilnadu 9 Jan, 2006 N.A.
Textile Infra. Company Inactive
Village Bidaj,
Vraj Integrated Textile
5 Taluka & Dist. Gujarat 30 Dec, 2005 Completed, Functional 8
Park Limited
Kheda
Source: Information collected by IIT Delhi
The technical textiles parks are operating with a mix of technical textiles, knitting and garment units.
The units that are reported to be operational in technical textile parks are presented in table 22.2.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Table 22.2: Companies in Vraj Integrated Textiles Park Ltd.

S. No. Name of Company Products / Processes
High quality PP / BOPP woven fabric, bags, clear sheets, ground
1 Centenary Polytex Pvt. Ltd.
covers, silt fence, sandbags and shopping bags
2 Bhagwati Woven Pvt. Ltd. HDPE & LDPE laminated tarpaulin rolls
3 Shanti Shirting Pvt. Ltd. Warp knitting and cotton knitting
4 Vrindavan Furnishing Pvt. Ltd. Warp knitting
5 Somnath Weaving Pvt. Ltd. Cotton knitting
6 Badrinath Packwell Pvt. Ltd. Packaging
Flexible packaging solutions, namely: biaxially oriented poly
7 Chiripal Polyfilms Ltd. propylene (BOPP) films, biaxially-oriented polyethylene
terephthalate (BOPET) films, and PET resin chips
8 Nandan Denim Ltd. Denim, shirting and yarn
Mundra SEZ Textile and Apparel Park Pvt. Ltd. has three firms that are in technical textiles.
Table 22.3: Companies in Mundra SEZ Textile and Apparel Park Pvt. Ltd.
S. No. Name of Company Products
Fibre, compostable food and beverage processing and packaging
Ahlstrom Fibercomposites Pvt. Ltd.
1 materials, liquid and air filtration media, diagnostic materials and
Unit I and II
protective medical fabrics
Skaps Industries Pvt. Ltd. Unit I and
2 Extrusion based Geosynthetic products & technical textiles
II
3 Terram Geosynthetics Pvt. Ltd. Geosynthetics
22.2.2 Inferences about technical textile parks

It is apparent from available information that the performance of the technical textile parks in India has a lot
of scope for improvement. The reasons that have been identified for the sub- optimal performance of
technical textile parks are mentioned in the table below.
Table 22.4: Reasons for delays, dormancy and cancellation of technical textile parks
Reasons of non-operational/cancellation of Textile parks
• Land related issues such as delay in land conversion, delay in clearances,
disputed ownership of lands and non-availability of adequate parcels of
land
Organisational gaps
• Delays in sanctioning the project and
• Differences between SPV members
Hurdles due to ongoing government • Challenges associated with the sale of land due to its cumbersome
policies process of conversion from agricultural and forest land to industrial land
_______________________________________________________________________________________________

___________________________________________________________________________________________________
• Location of some of the textile parks outside the textile clusters came out
Infrastructural roadblocks
as major roadblock
• Special Purpose Vehicles (SPVs) flouting the SITP's guidelines by getting
Flouting of provisions non-textile units into textile parks
• Slow fund mobilisation which ultimately has led to slow progress
• Lack of marketing efforts

• High rentals in some parks
Lack of interest among industries • No special benefits available for investors in parks
• Poor accessibility
• Delays in obtaining statutory clearances from the state governments
From the table above, it is evident that there is a need to improve the functioning of technical textile parks
and specific recommendations have been provided in the section on recommendations in the study.
_______________________________________________________________________________________________

23. Technical Textiles
Product Manufacturing
Firms: Findings from Primary Survey
With the objective of understanding the nature, engagement, and structure of three important participant
groups of technical textile industry in India viz. Product Manufacturing, Raw Material Manufacturing and
Machine Manufacturing, a pan-India survey of technical textiles product manufacturing firms, machine
manufacturing firms, and fibre, filament & technical yarn (raw material) manufacturing firms was carried out
with the help of semi-structured questionnaires that were specific to each group. Purposive sampling method
was used to identify the respondents for the survey because of wide variation in the number of firms in each
of the twelve application segments of the industry. The objective was to have a fair and adequate
representation of firms in all the application segments. The sample that was derived from the purposive
sampling strategy, which is a nonprobability sampling method adopted for this study, is assumed as being
representative of the population. A total of 114 responses were obtained from firms operating in these three
categories (product manufacturing, raw material manufacturing and machinery manufacturing firms) and
across the twelve application segments spread across different parts of the country. Findings from the
survey of these firms operating in the technical textiles industry in India are presented below.
23.1 Technical Textiles Product Manufacturing

Firms
This section captures the responses obtained from technical textile product manufacturing firms which are
operating in various application segments and are spread all over India. The following figure presents the
geographical spread of the respondent firms.
_______________________________________________________________________________________________

Section 23: Technical Textiles Product Manufacturing Firms
___________________________________________________________________________________________________
Figure 23.1 Geographical spread of respondent firms
From the heat map, it can be observed that of the total firms
surveyed, the largest responses were received from firms
operating in Maharashtra (28 percent). A large proportion of
the respondent firms were from Tamil Nadu, Gujarat,
Haryana and Delhi with a similar representation between 10
and 12 percent. The other states and union territories from
where responses could be obtained were West Bengal, Uttar
Pradesh, Punjab, Rajasthan, Himachal Pradesh, Uttaranchal,
Karnataka, Chhattisgarh and Puducherry.
23.2 Type of firms based on Ownership

Structure
Out of the surveyed product manufacturing firms, 47 percent were Private Ltd Companies and 30 percent of
were Public Ltd. Companies. Remaining 15 percent were Partnership firms/Limited Liability Partnership firms,
7 percent were sole proprietorships, and 1 percent fell in “Others” category. This indicates that a large
proportion of the respondent firms are large in terms of size and operation.
Figure 23.2: Distribution of respondent firms based on Ownership
Public Ltd., 30.11%
Partnership / Limited
Liability Partnership,
15.05%
Private Ltd., 47.31%
Sole Proprietorship,
6.45%
Others, 1.08%
In terms of the distribution based on scale (MSMEs-Non MSMEs) and focus on exports (Export Oriented Units
EOU or non-EOU), the following observation was made. Medium scale MSMEs constituted 35 percent of the
respondent firms while 28 percent were in the small enterprises category; 9 percent were in micro MSME
category. Around 5 percent of the respondent firms were multinational enterprises whereas 20 percent
represented national enterprises from the non-MSME category.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Figure 23.3: Distribution of respondent firms (MSMEs and Non-MSMEs)
MSME Small
Enterprise, 28%
MSME Medium
Enterprise, 35%
MSME Micro
Enterprise, 9%
Others (Non-MSME), 3%
Non-MSME- Multinational
Non-MSME- National Enterprise, 5%
Enterprise, 20%
Of the total firms surveyed, 24 percent of the respondent firms were export oriented units (EOUs).
Segregating the responses between MSME and non-MSME category, it was observed that this proportion
remained same i.e., around a fourth of the respondent firms were export focused while the rest were primarily
in the non-EOU category.
23.3 Segment wise distribution of firms and

their roles
All the respondent firms who participated in our study operate in various segments of the technical textile
industry. Many of these respondent firms operate in multiple segments whereas there are few that operate in
a single segment. A large number of participants were operating in Meditech and Indutech segments followed
by Protech, Sportech, Clothtech, Geotech and Hometech.
The figure given below presents the distribution of firms operating in various segments.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Figure 23.4 Distribution of respondent firms operating in various segments
Sportech, 8% Agrotech, 8%
Buildtech, 5%
Protech, 12%
Clothtech, 8%
Packtech, 7%
Geotech, 8%
Oekotech, 3%
Mobiltech, 7%
Hometech, 7%
Meditech, 13% lndutech, 15%
In terms of the roles and functions performed, a large majority of the respondent firms (91 percent) are into
core manufacturing. A large proportion (38 percent) of them cater to the global demand by exporting their
products to various parts of the world. Around a fifth of the respondents also function as converters; 15
percent of them also import products from global markets. A very small number of firms are also engaged in
providing testing facilities, manufacturing equipment and providing consultancy services.
23.4 Technical textile products manufactured by

respondent firms
The table shown below presents the comprehensive list of products being manufactured by the respondent
firms.
Table 23.1: List of technical textile products manufactured by respondent firms
Name of the List of products manufactured

Segment
Agrotech Fishnet twine, nylon multifilament fishing nets, nylon monofilament fishing nets, carbo-melt
fabric, twine, HDPE woven anti insect net, fishnet, woven agricultural net, shade net, tyre cord
fabrics, soil saver (open mess) in, nonwoven jute, warp knitted fabric, anti-hail net, anti-bird net,
ground cover, insect net, seed production cages, crop support nets, staking cord, fully
assembled trawls, purse seine nets, gill nets, dole nets, pelagic nets, ropes, crop cover.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Buildtech Tarpaulins -HDPE, LDPE sheets, awning fabric, auditorium fabric, liner fabric, outdoor fabrics,
shelter fabrics, tent fabrics, PVC laminated flex, coated sheet, formwork for concrete, erosion
control blankets, PVC, PU & acrylic coated fabric, & PVC coated tarpaulin and tensile fabric, &
warp knitted fabric shade net, soundex (noise absorbent non-woven membrane for perforated
tiles, carpet backing materials), safety nets, harnesses, lifting slings.
Clothtech Garment elastic tapes, cotton fabric, functional yarn, coated interlinings, military fabrics,
workwear, uniforms, high altitude, NBC clothing, tactical vests, interlinings for coat, jackets,
shirts and bags, interlining for apparels, embroidery backings, over the back for embroidery,
hook and loop tape fasteners, coated fabric.
Geotech Nonwoven geotextiles (used for filtration in infra industries), opan fibre, para aramid fibre
(twaron), high strength polyester, woven geotextile, geotube, geobag, pet geogrid and HDPE
geocell, geotextiles 100 csm-724 gsm, nonwoven needlepunch geotextile, geo composite,
formwork for concrete, erosion control blankets, nonwoven needlepunch, liner fabrics,
needlepunch felt for geobags, black out window panels, soil sever, nonwoven, leno binded wider
fabrics for erosion blanket, geo fabrics, mulch mats, boulder protection, landfill liners / fabrics,
polymer and steel gabions for shore protection, PP woven fabrics with different gsm & colour.
Hometech Furnishing (artificial leather are used in upholstery for sofas, chairs, cushion-covers, bean bags
etc for homes, offices, commercial establishments and hotels), leather goods and garments,
carpet and other textile floor coverings, furnishing fabric, flock coated fabric, functional yarn,
carpet backing cloths, nonwoven needlepunch carpet, hollow fibre pillows, cushions and
comforters, nonwoven thermal bonded waddings, designer window blinds, dry wipes & kitchen
wipes, hand kerchief, baby wipe, refreshing wipe, nonwoven thermally bonded, carpet yarns,
various floorcovering yarns, curtains and home textile yarns, mattress pads, laminated mattress
protectors, pillows, comforters & quilts, shopping bags, floor coverings, upholstery, pillow
covers, wadding for home textile (comforter, mattress pad).
Indutech Tape fabrics (nylon curing, electric cable, nuclear plant pipes), FRP composite segments (all
types of glass fabrics manufacturing like multiaxial, combi being used in FRP composites
manufacturing applications), opan fibre (pyromex), liner fabric, woven filter, polyamide nylon
monofilament yarn, HDPE twine, nylon & HDPE fishing nets, flame retardant canvass, water
repellent canvas, canvas tarpaulins, tyre cord fabrics, conveyor belting fabrics and specialty
fabrics, automotive felts, functional yarn, belting fabric, polyester industrial yarn coated sheet,
laminated tarpaulin, nonwoven jute felt, filter fabrics, speaker fabrics, automotive felts,
pultrusion (outer surface for reinforced fibre composite), backing cloth for artificial leather &
coating, water and oil filtration, dry wipes, dry cut wipes, refreshing single wipes, banquet
napkins, cocktail napkins, textile tapes, peel ply fabrics, belting fabrics, hydraulic and silicone
hoses, liner fabrics, automotive hoses, refreshing wipe for railway/airlines, wipe for pharma and
hygiene industry, inflatable floats & boats for defence, impression fabrics, specialized fabrics for
the marine industry, phenolic lamination industry, type write ribbon cloth, abrasives cloth,
phenolic laminates sheet /blocks etc manufacturing, PVC, PU & acrylic coated fabric, nylon tyre
cord fabric (NTCF), automotive yarns for seat cover, car mats and under-roof, marine yarns for
cruise ships, sewing threads, covers waterproof, industrial ropes, mooring ropes for shipping,
high tenacity poly propylene, multifilament yarn, twine, stitching thread, transport ropes,
industrial filter fabric, liquid filter fabric, HVAC, automotive filter fabric, fabric for composites, for
filtration nonwoven fabric.
Meditech PE film plain & laminated, surgical gown PPE coverall, drapes, bed sheet, medical apron, CTG
belts and medical mask tapes, spun-bond fabric, melt-blown fabrics, carbo-melt fabric,
_______________________________________________________________________________________________

___________________________________________________________________________________________________
needlepunch fabric, reusable masks, reusable PPEs, scrub suits, anti-microbial fabrics, non-
surgical facemask, community mask, medical PPE, bleached open weave and leno weave gauze
rolls-for export, surgical swabs and pads-for local and export markets, medical bandages-for
local and export markets, AB cotton (absorbent bleached cotton), cotton hydroentangled
nonwoven roll goods, finished good (cotton balls, pleat & wool roll cotton pad, round, square,
oval, rectangle), synthetic non absorbable sutures, synesthetic non absorbable hernia mesh,
hospital clean room garments/sterile products, drapes, gowns etc., protection garments, cap
mask, antistatic garments etc., safety wears, coverall, dangri, lab coats, dust malts, functional
yarn, medical wear in 100 percent cotton and 100 percent synthetic fabric for type 6b garments,
surgical gowns, medical gowns, protective gowns, drapes, isopropyl alcohol swabs, gauze swabs,
O.T. towels, under pads, disposable hospital bed sheets, mayo table cover, draw sheets, arm
board covers, eye pad, combined dressings, abdominal sponges, mortuary bags magic coin
tissues, disposable pool towels, N95 masks-NIOSH approved, surgical masks, medicated
dressings, surgical tapes, blood pressure cuffs, fabrics for stretchers, inflatable mattress/pillow,
sanitizing wipe, PVC, PU & acrylic coated fabric, adult diaper, adult pant, baby diaper, baby pant,
underpad, surgical- adhesive tape cloth, flannel cloth, dust mask & respirators, 3 ply surgical
mask & hygiene disposables, solid woven, fire resistant, antistatic PVC conveyor belts for
conveying of coal / minerals / potash in underground mines & industrial applications, 25-150
gsm hydroentangled fabric for different applications (cleaning, medical, cosmetic), surgical
drapes, protections kits.
Mobiltech Tarpaulin, truck covers, luggage, packing bags, automotive textiles, railway fabric, 100 percent
polyester warpknits, grey rayon tyre yarn, grey rayon cord, grey rayon tyre cord fabric, dipped
rayon tyre cord fabric, dipped nylon chafer fabric (multi / multi-wicking type / non-wicking type)
dipped nylon chafer fabric (mono / mono), nylon high tenacity yarn, nylon tyre cord fabric -
greige fabric, nylon tyre cord fabric - dipped fabric, polyester tyre cord fabric, component
binding layer for headliners, chafer fabrics for tyres, brake diaphragm fabrics, cycle tyre cord
fabrics, specialized fabrics for auto component industries, PVC, PU & acrylic coated fabric, nylon
tyre cord fabric (NTCF), truck canopy.
Oekotech Nonwoven thermally bonded different types of adsorbent media for removal of VOCs and
chemical agents, landfill solutions.
Packtech Packtech FIBC, laminated fabric, HDPE woven mesh for vegetable packing, flexible intermediate
bulk containers, PP woven sacks, PP woven fabric, hook and loop tape, hessian fabric, hessian
bags, sacking bags & shopping bag, D cut bags, V cut bags, handle bags, nonwoven for
shopping bags, nonwoven for packaging, nonwoven for interlinings, hydrocarbon free food grade
bags (various capacities), gunny bags, tea bags, stitching thread, FIBC bags, nonwoven fabric of
packing bags and rice bags, laminated fabric.
Protech High altitude low temp protective clothing for defence forces, tent (labour, army, advertising
canopy, men's rain coat, waterproof canvas), high visibility garments, anti-static garments,
chemical resistant, UV resistant, bullet proof jacket, helmets and other safety items, inherent
flame retardant fabric, waterproof & breathable fabric, flame retardant coveralls, workwear,
military & tactical wear, products for medical mattress for hospital beds, functional yarn, electric
static discharge tapes made for safety shoes and work shoes for electronic assembly industries,
treated and inherent flame retardant fabrics, chemical resistant suits type 6, disposable masks,
military fabrics, ballistic fabrics, workwear, nonwoven for PPE kit, PVC, PU & acrylic coated
fabric, head to toe solutions of protective wear, flame retardant textiles for tents, tentage
fabrics, bitumen & wax coated fabrics, bio gas balloon, camouflage nets, thermal liner for fire
and safety, bags, rainwear.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Sportech Moisture management fabric, products for sports shoe upper, handbags and fashion shoes, 100
percent polyester and 100 percent nylon woven and warp knits, canvas tarpaulins, shoelaces for
sports shoes and other shoes like school shoes, trekking boots etc. cordage for climbing ropes,
sportswear, 100 percent synthetic fabric for manufacture of sports apparel with special finishes,
shoetech-waterproof shoes with visibility, football, rugby ball, basketball, punching bags, volley
ball, breathable fabric for sports jacket, umbrella awnings, active wear, bag pack, high altitude
clothing, PVC, PU & acrylic coated fabric, toe puff, shoe components, yarns for sportswear, yarns
for sports shoes, cricket net, soccer nets, volley ball net, tennis net, golf nets etc. all types of
sports nets and accessories.
While many manufacturers indicated different functionalities of their products, none of them reported
manufacturing any smart, intelligent or e-textiles except one firm who indicated that they manufacture
medical textile products with sensors.
23.5 Production of technical textile products by

Indian manufacturers
This section presents an overview of the revenue and production of the technical textile products
manufactured by the respondent firms. Segment-wise representation of firms who responded to this question
is given in the figure below:
Figure 23.5: Segment-wise representation of respondent firms
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Total revenue of respondent firms

Total revenue of the respondent firms in all segments of technical textiles has increased at a CAGR of 10.03
percent, from Rs. 5,295.82 Crores in 2017-18 to Rs. 6,410.97 crores in 2019-20. Over this period, domestic
revenue has increased by a CAGR of 10.72 percent, while revenue from international markets has increased
by a CAGR of 7.75 percent. The domestic revenue has been three times more than the international revenue
consistently for the past three financial years.
The sales revenue generated by the respondent firms in the last three years (domestic and international) and
segment-wise composition of sales revenue of the respondent firms is presented in the figure below:
Figure 23.6: Total revenue of the respondent firms (Rs. Crores)
6410.97
6302.77
5295.82
4961.67
4848.74
4047.41
1449.3
1454.03
1248.41
2017-18 2018-19 2019-20

Domestic Revenue International Revenue Total Revenue
Figure 23.7: Contribution of each segment to total revenue (percent)
35
30
25
20
15
10
0
h
h
ch
h
ch
h
h
ch
ch
h
ec
ec
ec
ec
ec
ec
te
te
te
ite
ot
et
ilt
tt
ht
ot
ro
du
ck
ed
or
ob
m
Pr
Ge
ot
Ag
Pa
In
Sp
M
Ho
Cl
2017-18 2018-19 2019-20
_______________________________________________________________________________________________

___________________________________________________________________________________________________
23.6 Segment-wise analysis of sales revenue

and production
The following section presents a segment-wise analysis of the revenue and production by respondent firms in
various application segments of technical textiles.
23.6.1 Agrotech
Respondent firms in the Agrotech segment account for 8.63 percent of the sample and they reported
manufacturing anti-hail nets, anti-insect nets, anti-bird nets, crop covers, fishnet twines, fishing nets, ground
covers, nonwoven jute, shade nets, spunbond fabrics, soil saver (open mesh), twisted twines, warp knitted
fabrics and shade, and woven agricultural nets. The sales revenue of the Agrotech segment contributed 2 to 3
percent of the total sales of all segments in the sample between 2017-18 and 2019-20. Within the segment,
domestic sales contributed between 68 to 79 percent of the total sales during 2017-18 to 2019-20, while
exports ranged between 20 to 31 percent. Crop covers, fishnet twines, twisted twines, and fishing nets
accounted for almost 86 percent of the segment’s revenue in 2019-20. The utilisation of the production
capacity, measured as quantity produced as a percent of total production capacity, averaged between 65.83
to 75.33 percent during 2017-18 to 2019-20. The production capacity has remained constant during this time,
suggesting an overall increase in the actual production of Agrotech products during this period.
Figure 23.8: Domestic sales and exports under Agrotech segment (Rs. Crores)
139.54 136.54
98.07
44.61
36.39 39.03
2017-18 2018-19 2019-20
Agrotech exports Agrotech domestic sales
23.6.2 Buildtech
Respondent firms in the Buildtech segment account for 3.6 percent of the sample and they reported
manufacturing formwork for concrete, nonwoven needlepunch fabrics, nonwoven thermally bonded through
air, spun-bond fabrics, and soundtex. The segment represents approximately 0.1 percent each year to the
total revenue of the sample during 2017-18 to 2019-20. As per the respondent firms, the entire revenue of
_______________________________________________________________________________________________

___________________________________________________________________________________________________
the segment has come from domestic sales i.e., no international sales have been reported during 2017-18 to
2019-20. The revenue has grown at a CAGR of 12.87 percent during this period. Soundtex product accounts
for the majority of sales revenue of the segment, with its share increasing from 70.8 percent in 2017-18 to
84.05 percent in 2019-20. The Buildtech segment has reported a high average utilisation of its production
capacity that ranges between 77.68 percent and 87.50 percent. The production capacity of the respondent
firms has remained constant in the past three years, with actual production rising in 2018-19 from 2017-18
levels and then falling again in 2019-20.
Figure 23.9: Domestic sales under Buildtech segment (Rs. Crores)
7.02
6.50
5.51
2017-18 2018-19 2019-20
23.6.3 Clothtech
Respondent firms in the Clothtech segment account for 5.76 percent of the sample and they reported
manufacturing garment elastic tapes, coated interlinings, footwear, and hook and loop tape fasteners. The total
revenue of the segment grew at a CAGR of 2.57 percent even though the share of segment in total revenue of
the sample declined from 8.76 percent in 2017-18 to 7.6 percent in 2019-20. Domestic sales account for 89-92
percent of the total revenue of the segment during 2017-18 to 2019-20. Footwear, interlinings, hook and loop
tape fasteners contributed 83.4 percent, 78.18 percent, and 74.17 percent of the total revenue in the segment
in 2017-18, 2018-19, and 2019-20, respectively. The average utilisation of the production capacity of the
respondent firms has increased from 63.04 percent in 2017-18 to 75.54 percent in 2019-20.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Figure 23.10: Domestic sales and exports under Clothtech segment (Rs. Crores)
464.00
423.86 437.03
40.06 43.30 51.02
2017-18 2018-19 2019-20
Clothtech exports Clothtech domestic sales
23.6.4 Geotech
Respondent firms in the Geotech segment account for 10.07 percent of the sample, and they reported
manufacturing jute geotextiles, erosion control, woven and nonwoven geotextiles, geo bags, PET geogrid,
HDPE geocell, needlepunch felt, geo tubes, paving fabric, intelligent textile products, and soil savers. The
Geotech segment has grown at a CAGR of 22.30 percent between 2017-18 and 2019-20 and contributes 3.5-
4.5 percent of the total revenue of the sample. Within the segment, the share of domestic sales has dropped
from 62.28 percent in 2017-18 to 51.78 percent in 2019-20, witnessing an increase in international sales from
37.72 percent to 48.22 percent. PP woven fabrics account for the highest share in total revenue of the
segment, followed by PET geogrid, and HDPE geocell. On the production side, the average utilisation of the
production capacity has increased from 68.14 percent in FY 2017-18 to 73.13 percent in FY 2019-20.
Production capacity has remained constant for most products except PET geogrid which has increased by 150
percent. The actual production of jute geotextiles, erosion control, and needlepunch has dropped in 2019-20
relative to the 2017-18 levels while that of PP woven fabrics and PET geogrid have increased during this period.
Figure 23.11: Domestic sales and exports under Geotech segment (Rs. Crores)
151.39 143.20
133.37
115.16
98.26
69.74
2017-18 2018-19 2019-20
Geotech exports Geotech domestic sales
_______________________________________________________________________________________________

___________________________________________________________________________________________________
23.6.5 Hometech
The respondents in Hometech segment account for 9.35 percent of the sample, and they have reported
manufacturing carpet yarns and other floor covering yarns, carpet backing cloth, curtains, woven, knitted, and
flock fabrics, nonwoven thermal bonded waddings, baby wipes and refreshing wipes, furnishing, pillows,
quilts, cushions and comforters, mattress pads, laminated mattress protectors, and black-out window panels.
The share of the Hometech segment in total revenues has decreased from 9.62 percent in 2017-18 to 8.96
percent and 7.55 percent in 2018-19 and 2019-20 respectively. In contrast to other segments, international
sales have contributed more than 55 percent of the total revenues of this segment i.e. international sales
dominate the Hometech segment for the respondent firms. Carpets, flock fabrics, woven and knitted fabrics
have contributed the highest revenue in this segment. The average utilisation of the production capacity in the
Hometech segment has increased from 63.02 percent in FY 2017-18 to 68.09 percent in FY 2019-20.
Production capacity of baby wipes, refreshing wipes, shopping bags, floor coverings, comforters and quilts
increased during 2017-18 to 2019-20, while it remained constant for other products.
Figure 23.12: Domestic sales and exports under Hometech segment (Rs. Crores)
331.12
308.61
268.79
233.80 215.05
200.97
2017-18 2018-19 2019-20
Hometech exports Hometech domestic sales
23.6.6 Indutech
Around 14 percent of the respondent firms are engaged in production and sale of Indutech products.
Respondent firms in this sample reported manufacturing formwork for tyre cord fabrics, conveyor belting
fabrics, speciality fabrics, dipped fabric. The segment contributed approximately 28 to 32 percent each year to
the total revenue of the sample during FY 2017-18 to FY 2019-20. The Indutech segment has grown at a
CAGR of 2.68 percent between 2017-18 and 2019-20. Furthermore, more than 98.5 percent of revenue of the
segment has come from domestic sales during this period; less than 1.5 percent of international sales have
been made during 2017-18 to 2019-20. Tyre cord fabrics, conveyor belting fabrics, speciality fabrics products
account for majority of sales revenue of the segment, with their share increasing from 44.3 percent in 2017-
18 to 50.6 percent in 2019-20. However, the Indutech segment has marked relatively high average utilisation
ranging from 80 percent to 91 percent of its production capacity. The actual production rose in 2018-19 from
2017-18 levels and then fell again in 2019-20.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Figure 23.13: Domestic sales under Indutech segment (Rs. Crores)
2025.15
1681.81 1763.05
2017-18 2018-19 2019-20
Indutech domestic sales
23.6.7 Meditech
Approximately 17 percent of the respondent firms are engaged in production and sale of Meditech products.
Respondent firms in this segment reported manufacturing of baby pants, adult diapers, N95 masks, PPE suits,
wipes, medical bandages, etc. The segment has contributed approximately 12 to 18 percent to the annual
revenue of the sample during 2017-18 to 2019-20. This segment has grown at a CAGR of 33.78 percent
between 2017-18 and 2019-20. Furthermore, more than half the revenue of the segment has come from
domestic sales during this period. International sales share has hovered between 34 percent and 45 percent
during 2017-18 to 2019-20. It is higher than overall share of exports. Baby pants account for majority of sales
revenue of the segment, with its share increasing from 11.5 percent in 2017-18 to 15.1 percent in 2019-20.
However, the Meditech segment has marked relatively moderate average utilisation ranging from 60 - 68
percent of its production capacity. The actual production has consistently risen since 2018-19 till 2019-20.
Figure 23.14: Domestic sales and exports under Meditech segment (Rs. Crores)
769.56
474.62
390.11 404.52
351.08
304.89
2017-18 2018-19 2019-20
Meditech exports Meditech domestic sales
_______________________________________________________________________________________________

___________________________________________________________________________________________________
23.6.8 Mobiltech
A total of six percent of respondent firms are engaged in production and sale of Mobiltech products.
Respondent firms in this segment reported manufacturing of automotive components, conveyer belts, luggage
fabric, etc. The segment contributed approximately 9 to 11 percent each year to the total revenue of the
sample during FY 2017-18 to FY 2019-20. Furthermore, more than 60 percent of the revenue of the segment
has come from domestic sales during this period. More than 20 percent sales have come from exports during
2017-18 to 2019-20. Automotive components account for majority of sales revenue of the segment, with the
share increasing from 46.8 percent in 2017-18 to 49.5 percent in 2019-20. The segment has marked relatively
high average capacity utilisation ranging between 88 percent to full production capacity. The actual production
rose from 2017-18 levels to 2018-19 and then fell in 2019-20.
Figure 23.15: Domestic sales and exports under Mobiltech segment (Rs. Crores)
469.23 480.08
367.62
192.00
129.07 149.09
2017-18 2018-19 2019-20
Mobiltech exports Mobiltech domestic sales
23.6.9 Packtech
A total of eight percent of respondent firms are engaged in production and sale of Packtech products.
Respondent firms in this segment reported manufacturing of hessian fabric, hessian bags, sacking bags,
shopping bags, etc. The segment contributed approximately 14 to 16 percent each year to the total revenue
of sample during 2017-18 to 2019-20. Furthermore, more than 60 percent of the revenue of the segment has
come from domestic sales during this period. Share of exports ranges from 30 percent to 35 percent during
2017-18 to 2019-20. The sales revenue of respondent firms in Packtech segment has grown at a CAGR of
5.11 percent between 2017-18 and 2019-20. Furthermore, the share of domestic sales has consistently
increased from 65 percent in 2017-18 to 69 percent in 2019-10. Hessian fabric, hessian bags and sacking
bags, accounts for majority of sales revenue of the segment, with their share hovering from 33 percent to 35
percent. The Packtech segment has marked relatively high average capacity utilization ranging between 75
percent and 80 percent of its production capacity. The actual production rose from 2017-18 levels to 2018-19
and then fell in 2019-20.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Figure 23.16: Domestic sales and exports under Packtech segment (Rs. Crores)
612.58 636.34
542.16
287.55 311.86 280.29
2017-18 2018-19 2019-20
Packtech exports Packtech domestic sales
23.6.10 Protech
Nine percent of the respondent firms are engaged in production and sale of Protech products. Respondent
firms in this segment reported manufacturing of bullet proof jackets, helmets, military FR coverall, wax coated
fabrics, etc. The segment contributed approximately 1 to 4 percent each year to the total revenue of the
sample during 2017-18 to 2019-20. The Protech segment has grown at a CAGR of 85.81 percent between
2017-18 and 2019-20. Furthermore, more than 90 percent of revenue of the segment has come from
domestic sales during 2019-20 i.e., less than 10 percent international sales have been made during 2019-20.
The share of domestic sales has consistently increased from 33 percent in 2017-18 to 93 percent in 2019-10.
Bullet proof jackets and helmets account for majority of sales revenue of the segment, with the share
hovering from 56 percent to 87 percent. The segment has marked relatively moderate average utilisation
ranging between 59 percent and 84 percent of its production capacity. The actual production has consistently
risen from 2017-18 to 2019-20.
Figure 23.17: Domestic sales and exports under Protech segment (Rs. Crores)
232.78
98.31
48.87
23.59 33.09
17.39
2017-18 2018-19 2019-20
Protech exports Protech domestic sales
_______________________________________________________________________________________________

___________________________________________________________________________________________________
23.6.11 Sportech
Seven percent of the respondent firms are engaged in production and sale of Sportech products. Respondent
firms in this sample reported manufacturing of sports shoes, sportswear, shoelaces, sports jackets etc. The
segment contributed approximately 2 to 5 percent each year to the total revenue of the sample during 2017-
18 to 2019-20. The Sportech segment has grown at a CAGR of 19.58 percent between 2017-18 and 2019-20.
Moreover, more than 10 percent of revenue of the segment has come from exports during this period. Sports
shoes and sportswear accounts for majority of sales revenue of the segment, with their share hovering from
60-80 percent. The average utilisation of the production capacity in the Sportech segment has increased from
60 percent in 2017-18 to 87 percent in 2019-20. The actual production has consistently risen from 2017-18 to
2019-20.
Figure 23.18: Domestic sales and exports under Sportech segment (Rs. Crores)
253.49
204.24
94.50
41.00 39.79
11.00
2017-18 2018-19 2019-20
Sporttech exports Sporttech domestic sales
There has been a trend towards increase in total revenue of the respondent firms in the technical textiles
industry, with Meditech experiencing the highest rate of revenue growth at 35.77 percent in 2019-20.
Indutech continues to dominate the revenue share from 2017-18 to 2019-20 even though there has been a
fall in its revenues in 2019-20. Meditech and Packtech contribute the second and third largest share to the
total revenue pool of the respondent firms. In terms of CAGR, Protech, Meditech, and Geotech segments
emerge as the fastest growing segments. The CAGR for each segment has been estimated based on complete
responses of firms across the three years. It can also be noted that the domestic sales account for 100
percent of revenue in Buildtech. Additionally, domestic sales contribute a majority share of total revenue in all
other segments except Hometech. In Hometech, revenue from exports exceeds 55 percent in the last three
years. From a production point of view, on an average, Buildtech, Indutech, and Mobiltech have relatively
higher utilisation of production capacity for the three periods. Meditech and Hometech segments seem to have
capacity utilisation on relatively lower side for all three periods as compared to other segments.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
23.7 User industries of technical textile products

The consumption pattern of the technical textile products by various user industries can be gauged from the
figure below. It is clearly visible that the private sector, by and large, dominates the consumption market. In
the government sector, consumption can be seen to be more in environment, construction, and healthcare
sectors and lesser in sports equipment, automotive and clothing sectors. Among the private players,
consumption of technical textile products is more in sports equipment, automotive and healthcare sectors. The
consumption gap between the government and private players is more pronounced in automotive, sports and
clothing sector.
Figure 23.19: Consumption of technical textile products by different user industries
100%
80%
60%
40%
20%
0%
re
re
g
e
ng
n
iv
in
io
t
tu
ca
n
en
hi
ot
ag
ct
tio
ul
th
ot
pm
tru
m
ck
ric
ec
al
Cl
to
Pa
ns
ui
He
ot
Ag
Au
eq
Co
pr
ts
l
ta
or
en
Sp
nm
ro
vi
En
Government sector Private sector
23.8 Raw materials (RM) used in the production

of technical textile products
The technical textile industry consumes a wide variety of raw materials. The information about the use of
various kinds of raw materials by the respondent technical textile product manufacturing firms operating in
India is presented in the following figure:
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Figure 23.20: Raw material used by technical textile product manufacturing firms
Normal PolYester
Nylon
High teNAcity polYester
Polypropylene
Cotton
HDPE (High-Density Poly Ethylene)
Viscose
PVC (Polyvinyl chloride)
LDPE (Low-density polyethylene)
M-aramid (Nomex)
Polyethylene
P-aramid (Kevlar, Technora, Twaron etc.)
Acrylic/Modacrylic
LLDPE (Linear low-density polyethylene)
Jute
Ultra-high molecular weight polyethylene
Silk
Wool
PVDF (Polyvinylidene fluoride)
Flax/linen
Remie
Coir
PTFE
Polyurethane
PVA
Rubber
Fibre Glass Roving
Rubber
0% 10% 20% 30% 40% 50% 60%
Polyester is the most commonly used raw material by the respondent firms operating in the Indian technical
textile Industry. High tenacity and durability make it appropriate for production of clothing. Polyester is a
strong fibre and it can withstand strong and repetitive movements. Manmade raw materials are being used
much more as compared to natural raw materials.
23.8.1 Segment-wise consumption of various raw materials

The table below presents a summary of the percentage of firms consuming raw materials in different
segments.
Table 23.2 Raw material used by technical textile product manufacturing firms (percentage of
respondents)
Raw materials Agro Build Cloth Geo Home Indu Medi Mobil Pack Pro Sport Oeko
Cotton 10.5 16.7 36.8 10.5 38.9 24.3 29.0 29.4 18.8 27.6 45.0
Jute 10.5 33.3 10.5 31.6 16.7 8.1 5.9 18.8 3.5 10.0 50.0
Silk 5.3 8.3 10.5 10.5 5.6 5.4 6.5 5.9 6.3 10.3 5.0 17.0
Coir 10.5 8.3 10.5 2.7 5.9 6.3 3.5 5.0 33.0
Flax/linen 10.5 2.7 3.5 5.0
Remie 16.7 10.5 2.7 17.0
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Raw materials Agro Build Cloth Geo Home Indu Medi Mobil Pack Pro Sport Oeko
Wool 5.3 5.6 3.2 3.5
Rubber 5.0
Viscose 10.5 16.7 26.3 10.5 44.4 24.3 32.3 23.5 12.5 37.9 20.0 17.0
Normal Polyester 26.3 41.7 73.7 36.8 77.8 54.1 51.6 58.8 43.8 65.5 85.0 33.0
High tenacity 31.6 25.0 42.1 36.8 44.4 37.8 38.7 52.9 37.5 48.3 45.0
polyester
Nylon 31.6 16.7 57.9 21.1 50.0 48.7 45.2 52.9 25.0 51.7 60.0 17.0
Acrylic/Modacrylic 8.3 21.1 5.3 16.7 10.8 16.1 5.9 24.1 25.0 17.0
Polypropylene 21.0 25.0 15.8 42.1 27.8 32.4 38.7 23.5 37.5 44.8 35.0 33.0
Polyethylene 36.8 25.0 5.3 15.8 16.7 16.2 12.9 23.5 37.5 24.1 5.0 17.0
Ultra-high 5.3 10.5 11.1 9.7 17.7 6.3 24.1 10.0 17.0
molecular weight
polyethylene
P-aramid (Kevlar, 5.3 15.8 15.8 5.6 16.2 19.4 11.8 6.3 37.9 20.0 17.0
TechNora, Twaron
etc.)
M-aramid (Nomex) 10.5 8.3 21.0 21.1 22.2 21.6 29.0 23.5 37.9 20.0 33.0
HDPE 57.9 58.3 15.8 47.4 27.8 29.8 22.6 35.3 43.8 20.7 15.0 67.0
LLDPE 15.8 16.7 10.5 10.5 22.2 13.5 19.4 23.5 25.0 17.2 5.0 33.0
LDPE 21.1 16.7 10.5 10.5 33.3 18.9 25.8 25.0 20.7 10.0 17.0
PVC 21.1 25.0 15.8 21.1 33.3 16.1 47.1 18.8 24.1 30.0 50.0
PVDF 5.3 5.3 5.3 16.7 3.2 17.7 12.5 6.9 17.0
Fibre Glass Roving 2.7
PVA 8.3 5.3 5.3 5.6 5.9 6.3
Polyurethane 5.3 2.7 3.2 3.5 5.0
PTFE 5.6 2.7 3.2 5.9 3.5
23.8.2 Purchase of raw materials by Indian firms

Easy availability of raw material at affordable prices preferably from domestic sources is a crucial parameter
for business success of the manufacturing firms. The Indian technical textile manufacturing firms source
their raw material requirements from domestic and international sources. A large proportion of the number
of respondent firms (69 percent) reported sourcing from the international sources, while the remaining
31 percent are sourcing from domestic sources only.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Figure 23.21: Comparative share of expenditure on raw materials (domestic and international sources)
International
32%
Domestic
68%
The figure above presents the average share of raw material purchased (value) from domestic and
international markets. On an average, around a third (32 percent) of the total purchases come from the global
markets whereas, the remaining (68 percent) is sourced from within the country.
23.8.3 Import of raw materials by Indian technical textile product

manufacturing firms
The Indian technical textile product manufacturers are highly dependent on imports of many raw materials.
The figure shown below captures the source-country wise analysis of these imports.
Figure 23.22: Relative consumption (segment-wise) of imported raw materials from different countries
100
90
80
70
60
50
40
30
20
10
0
m
a
a
a
nd
s
sia
sh
an
y
A
er
an
in
re
bi
pa
US
na
de
la
iw
ne
ra
Ch
th
Ko
rm
Ja
ai
et
Ta
la
iA
O
do
Th
Ge
Vi
ng
ud
In
Ba
Sa

Meditech Mobiltech Oekotech Packtech Protech Sportech
Others include Hong Kong, Malaysia, Singapore, Switzerland, Austria, Denmark, The Netherlands, Spain, Turkey, France, Iran, Qatar, Russia,
Dubai, UAE, Australia, Bahrain, Poland and regions namely Europe, UK Sea, Middle East, and Gulf countries.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
China is the most dominant player among source countries of raw material imports for Indian technical textile
manufacturers. About 24.2 percent of the respondents reported that they are sourcing their raw materials
from China. The raw materials imported include fibre, filament or technical yarn of polyester and nylon along
with other nonwoven fabrics. Major segments that import raw material from China include Indutech,
Meditech, Protech and Hometech.
Taiwan emerges as the second largest (9.4 percent) supplier country for raw material. Polyester, nylon and
meltblown nonwovens are the raw materials that are getting imported mainly by firms in Meditech, Protech,
Indutech and Sportech segments.
USA is almost equally important source of raw material procurement as Taiwan with 9.4 percent of the firms
reporting USA to be their source country. Nylon is the material that is procured the maximum; firms in
Indutech, Meditech and Protech segments are the main importers from USA.
Germany is one of the largest raw material producers in Europe. Around 7.8 percent of the respondents are
importing products like polypropylene mesh, stabilizer, PVC, nylon and flame retardant textiles from Germany
and these firms are mainly operating in Meditech, Indutech, Clothtech and Protech segments.
Other countries from where Indian firms import raw materials for technical textiles are
• Thailand (7 percent of the respondents; raw materials imported: nylon, polyester and viscose; leading
segments: Indutech, Mobiltech, Meditech, Protech and Hometech)
• Japan (5.5 percent respondents; raw material imported: aramids, polyvinyl alcohols (PVAs), polyester and
resorcinol; leading segments: Protech, Indutech and Meditech)
• South Korea (5.5 percent respondents; raw material imported : caprolactam, acrylic acid and Pure MDI
(adhesives) and leading segments: Indutech, Mobiltech and Protech)
• Saudi Arabia (5.5 percent respondents; key raw material: polypropylene, HDPE and polyester fibres;
leading segments: Geotech, Packtech and Buildtech)
• Vietnam (key raw materials: polyester fabric/yarn and spandex; leading segments: Sportech, Clothtech,
Meditech and Geotech)
• Indonesia (key raw material: viscose, polyester and nylon; leading segments: Hometech, Indutech and
Meditech), Bangladesh (key raw material: Jute, leading segments: Hometech, Geotech, Packtech and
Indutech).
Table 23.3: List of products imported by technical textile product manufacturers
S. No. Source Country Name of raw material

/ Region for
Import
1 Australia Foam
2 Austria Viscose
3 Bahrain Fibre glass roving
_______________________________________________________________________________________________

___________________________________________________________________________________________________
4 Bangladesh Jute
5 China Antistatic polyester fabric, aramids, fabric, greige fabric, adhesives and tow, fibre, flame
retardant textiles, high tenacity polyester filament yarn, melt-blown filter, meta and para
aramid, nylon, nylon yarn-n66 resorcinol, packing material, PE lamination film, poly-
cotton woven fabric, nonwoven laminated fabric, nonwoven synthetic fabric, packing
material, polyester, polyester fibre, polyester yarn, reflective tapes, synthetic fibres,
uhmwpe, viscose, zippers, wrap knitted polyester fabric
6 Denmark Bicomponent pet spunbond
7 France Nylon
8 Germany Activated carbon spheres, adhesive & chemicals, co-poly amides, co-poly amides, flame
retardant textiles, nylon, phosphate plasticizers, PP mesh, PVC, stabilizer, stabilizer, UV
stabilizer
9 Hong Kong Packing material, viscose
10 Indonesia Nylon, polyester, viscose
11 Iran HDPE/LDPE
12 Japan Aramids, caprolactam resorcinol, meta and para aramid, mod acrylic, opan (pyromex),
poly vinyl alcohol (PVA), polyol + pure MDI, stabilizer, teeijinconex (mzeta aramid fibre)
13 Malaysia Calcium carbonate power (coated), HDPE films, fibres, nonwoven synthetic fabric
14 Netherlands Caprolactam, twaron
15 Poland Fibre
16 Qatar HDPE/LDPE
17 Russia caprolactam & chips
18 Saudi Arabia HDPE films, fibres, HDPE/LDPE, polyester fibre, polymer chips/granules, polypropylene
(PP) staple fibre
19 Singapore LDPE granules, polypropylene (PP) staple fibre, super absorbent polymer
20 South Korea Acrylic acid, additive, drying DH 960e, caprolactam, fibre, polyol + pure MDI
21 Spain Mod acrylic
22 Switzerland Co-poly amides, dyes
23 Taiwan Melt-blown filter, meta and para aramid, nylon 66, nylon chips/granules, polyester, pure
adhesive, HMPSA adhesive, spunless, TPU lamination film
24 Thailand Nylon chips/granules, plasticizer, poly vinyl chloride (PVC) resin, polyester, viscose
25 Turkey Bicomponent pet spunbond
26 UAE Polypropylene (PP) staple fibre, PP granules
27 USA Aramids, caprolactam, melt-blown filter, nylon 6, nylon 66, nylon chips/granules, nylon
stretchable fabric, nylon suture thread, polyester suture thread, PP suture thread,
UHMWPE, wood pulp
28 Vietnam Filler masterbatch, high tenacity polyester filament yarn, spandex, wrap knitted polyester
fabric
_______________________________________________________________________________________________

___________________________________________________________________________________________________
29 UK Viscose tow
30 Dubai Polyester fibre, polypropylene (PP) staple fibre
31 Europe Aramids, dyneema yarn, medical fabric, meta and para aramid, mod acrylic, UHMWPE,
viscose
23.9 Manufacturing processes used by technical

textile product manufacturing firms
The figure presented below depicts the distribution of processes being adopted by product manufacturing
firms in technical textile industry.
Figure 23.23: Manufacturing processes used by technical textile firms in India (percentage of firms)
Nonwoven
16%
Yarn Manufacturing Weaving and Knitting
14% 36%
Other Methods
34%
Around 36 percent of technical textile firms use weaving and knitting as the main process for product
manufacturing. Majority of small and medium firms use cost-effective processes like stitching as indicated in
the ‘Others’ response. Other processes used are yarn manufacturing and Nonwoven which are adopted by
14 percent and 16 percent of the firms respectively. The rest of the processes have limited use among
respondent firms. It is to be noted that fibre manufacturing in the figure above also corresponds to
manufacture of spun-melt nonwoven fabrics.
Fibre Manufacturing Processes
The respondent firms reported the use of three major fibre manufacturing processes viz. melt spinning,
solution spinning and dry-jet wet spinning.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Yarn Manufacturing Processes
A majority of the respondent firms reported the use of ring spinning technique as the most widely used
technique in yarn manufacturing process. Other post-spinning processes included doubling and twisting.
Nonwoven Processes
The figure presented below represents distribution of various nonwoven manufacturing processes being used
by the technical textile product manufacturing firms.
Figure 23.24: Nonwoven textile manufacturing processes used by technical textile firms in India
Needlepunching, 38%
Meltblowing, 5%
Hydroentanglement,
10%
Spunbonding,
10%
Electrospinning, 3%
Through Air Bonding,

Thermal Bonding,
8%
26%
About 38 percent of the respondent firms which use nonwoven techniques for manufacturing their products
use needlepunching as their main process. Thermal bonding, including through air bonding, is the 2nd most
widely used process under nonwoven category being used by 34 percent of respondent firms. Other processes
include hydroentanglement (10 percent), spunbonding (10 percent), and meltblowing (5 percent).
Electrospinning (3 percent) is the least commonly used process.
Weaving and Knitting
Almost 72 percent of the respondent firms use weaving as their main process while 28 percent reported the
use of knitting as their main process.
Other Methods
The figure that is presented below shows the distribution of technical textile product manufacturing firms
based on those textile manufacturing processes being used which do not fit into any of the previous
categories.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Figure 23.25: Some other textile manufacturing processes used by technical textile firms in India
Lamination, 12% Sealing, 7% Stitching, 20%
Coating, 23%
Braiding, 2%
Vacuum-Assisted
Composite Making,
RTM, 1%
4%
Resin Transfer
Molding (RTM), 1% Cutting and Sewing,
Compression Thread, Cord, Rope 13%
Moulding, 3%Knotting, 4% Fiber Filling, 2% Making, 7%
Out of the techniques that were reported, coating (23 percent) and stitching (20 percent) emerge out to be
the most commonly used techniques. Other methods used are lamination (12 percent), cutting and sewing
(13 percent), sealing (7 percent), and thread, cord, rope making (7 percent). Knotting (4 percent),
compression moulding (3 percent), braiding (2 percent) are among the least used methods.
23.9.1 Segment-wise distribution of manufacturing processes

A segment-wise analysis was conducted to gauge the distribution and spread of technical textile
manufacturing processes across 12 application segments of technical textile industry in India and the findings
are recorded below:
Figure 23.26: Segment-wise distribution (relative frequency) of textile manufacturing processes used by technical textile
firms in India
200
180
160
140
120
100
80
60
40
20
0
ch
ch
h
ch
ch
ch
h
ch
h
ec
ec
ec
ec
ec
ec
te
te
te
te
te
ite
ht
ot
ot
ot
et
ilt
du
or
ck
ild
ro
ed
ob
m
ek
Ge
Pr
ot
Sp
Ag
Pa
Bu
In
M
Ho
Cl
O
M
Fiber Manufacturing Yarn manufacturing Non Woven Weaving and Knitting Others
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Most of the respondent firms operate in more than one application segment of technical textiles, with largest
share of firms in Indutech, Meditech and Protech segments. Fibre manufacturing processes are used most
commonly in the Indutech and Mobiltech segments. Yarn manufacturing processes are spread equally across
Clothtech, Geotech, Hometech, Meditech, Mobiltech and Protech with Indutech as the highest. Nonwoven
methods are most popularly used in the Geotech, Indutech and Meditech segments. Indutech is the leading
segment under weaving and knitting processes followed by Protech at the second position.
Important machines installed and used in the production of technical textile products by Indian
firms
The technical textile product manufacturing firms use a wide variety of machines and equipment. The table
below presents a list of important machines being used by respondent firms in manufacturing products in
various application segments.
Table 23.4 List of important machines installed by technical textile product

Segment Name of Machines
Agrotech PP spunbond nonwoven fabric making machine, water jet looms, circular knitting looms,
double dot coating machine, inspection and packing machine, warp knit insertion looms,
HTHP dying machines, hot air stenter, powder dot coating machine, sectional warping
machine, warping machine for warp knitting, carding machine, needlepunching machine
Clothtech Calendar line, lamination machine
Geotech Water jet weaving looms, warping, twisting, sizing, rolling machine, hydraulic press,
autoclaves, conveyor ovens
Hometech Warping, sizing, weaving, dyeing & processing, stitching, PVC transfer coating line, PU dry
line, PU wet line machines
Indutech PP spunbond nonwoven fabric (single beam machine), PP spunbond and meltblown
nonwoven fabric (double beam machine), needlepunching machine, hydrophilic machine,
looms and hot flu, lamination machine, adult diaper machine, adult pant machine, baby
diaper machine, baby pant machine, underpad machine
Meditech Needlepunching, oven, cast coating line, tabletop tufting machines, wide width tufting,
weaving machines, shuttleless looms, coating machines, dyeing machines, knitting
machines, multiaxial machine, stitching, maxing and compounding, printing line,
embossing line, inspection machine, pigment pasting, biaxial machine
Mobiltech Needlepunching machine, sizing, warping, looms, washing, jet dyeing, stenter, calender,
coating, inspection, garmenting, welding machine
Packtech Fishnet knitting, ring twisters, two for one twister, length stretching machine, (heat
setting), dyeing machine (colouring), drilling machine, threading machine, winders,
knotting (netting) machine
Protech Projectile and airjet looms, warping machine, fibre opening line, carding, hydro-
entanglement unit, winder and slitter warping machine, ring twister TFOS
Sportech Lamination and coating machine, needlepunching machine, INA hanger system- stitching
line, multi needle quilting machine, assembly winding, twisting, warping, cop making,
weaving looms, paste mixing m/c, dipping (impregnation) & coating plant, fastener fixing
m/c, overlock and stitching machine, suction pillow filling machine, edge binding machines,
carding machine, thermal bonding machine
Various Segments Automatic multi-layer mask manufacturing line, beaming machine, coating machine, high
strength beams, universal testing machine, punching machine, ultrasonic welding machine,
cutting machine, mask loop welding machines, carbon coating machine with knife on roller
_______________________________________________________________________________________________

___________________________________________________________________________________________________
coating head, screen for coating of adhesives and oven for curing lamination set up,
electrospinning machine, printing machine, folding machine, stitching machine, quality
checking machine, baling machine and generator coater, stenter, flatbed and rotary,
screen printing, digital printing, arioli loop ager, soft flow dyeing machine, airoli continuous
washer, duotec extrusion plant, circular weaving machine, belt weaving machine,
lamination machine, fabric & belt cutting machine lamination, extruder spinning machine,
cable corder, looms, dipping spinning, finishing, cutting, sewing, heat transfers, singeing
cum desizing machine, continuous bleaching range machine, stenter machine, sansforizer
machine, dot coating machine, coating machine, lamination machine, calendar machine,
high speed braiding machines, tipping machine, high speed shuttleless narrow fabric
looms, PE breathable compounding machine, PE breathable film line with embossing unit
machine for slittig rolls, machine for rewinding rolls, seam seal machine rope squeezing
machine, extrusion line, nylon monofilament manufacturing extruder, direct coating line,
hot air sealing machine, heat sealing machine, coating machine, polymerisation reactors,
solid state polymerisers, melt extruders, spin draw machines, airlay cards, jet lacing
machines
The table above suggests that a range of different machines are used in the production of technical textiles.
23.9.2 Procurement of machines by Indian technical textile

manufacturing firms
A significant proportion (64 percent) of the respondent firms reported that they purchase machines from
international machine manufacturers incurring an average share of 60 percent of their total purchase
expenditure for such purchases. This indicates a substantial dependence of Indian firms on imported machines
procured from international suppliers. Out of the firms that import machines, around 60 percent of the firms
reported that more than half of their total purchase was from foreign manufacturers and in some cases, the
share was more than even 75 percent. This shows that Indian firms are burdened with large costs due to
import of machines. Around 61 percent of the respondent firms reported that they had procured machines
from domestic machine manufacturers too.
Figure 23.27: Comparison of share of costs incurred on purchase of machines from domestic and international suppliers
Average percentage
purchases from
Domestic machine
manufacturers,
40%
Average percentage
purchases from
International
machine
manufacturers,
60%
_______________________________________________________________________________________________

___________________________________________________________________________________________________
23.9.3 Import of machines from outside India

As already reported above, a large number of firms in India purchase imported machines. The figure given
below presents the source countries of the imported machines as reported by the respondent firms.
Figure 23.28: Source countries of machines imported by Indian technical textile manufacturing firms
100
90
80
70
60
50
40
30
20
10
0
nd
an
y
A
a
n
a
ce
y
s
al
an
in
re
pa
US
er
an
iw
la
It
Ch
Ko
rm
th
Ja
er
Ta
Fr
O
itz
Ge
h
ut
Sw
So

Meditech Mobiltech Oekotech Packtech Protech Sporttech
Others include Austria, Turkey, UK, Brazil, Belgium, Hong Kong, Netherlands, Poland and Europe as a region.
It is apparent from the figure that there are five major countries from where machines are being imported by
Indian firms. These countries are China, Germany, Taiwan, USA & Italy. In addition to these countries, there
are other countries viz. Switzerland, South Korea, Japan, France, Austria etc. who also act as source of supply
of machines for Indian firms. China is the country from where maximum number of machines are being
imported by firms from Hometech, Indutech and Sportech reporting the largest share (around 13 percent
each) of purchase. Germany is the next important source of origin for machines imported by firms from
Hometech (14.28 percent), Indutech (14.28 percent) and Mobiltech (12.5 percent) segments. Firms producing
products belonging to Protech (12.5 percent) and Sportech (12.5 percent) segments report their largest
procurement from Taiwan.
Overall, the six segments which reported large imports from various countries are Meditech (14.03 percent),
Indutech (13.74 percent), Hometech (11.11 percent), Mobiltech (10.81 percent), Protech (11.69 percent), and
Sportech (11.40 percent). On the contrary, the import by firms producing items of Oekotech segment was
minimal (1.7 percent) and it was from China and Germany.
Around 41.7 percent of the respondents reported that they are sourcing their machines from China with major
importing segments being Hometech, Indutech, and Sportech. Around 21.66 percent of the respondents
_______________________________________________________________________________________________

___________________________________________________________________________________________________
reported import of machines from Germany by firms operating in Hometech and Indutech segments. A large
number of firms in Protech and Sportech segments have been sourcing machines from Taiwan as well.
Table 23.5: List of Machinery imported from the various countries

Countries Names of the machines imported
/ Regions
Austria Blow room, zimmer.
Belgium Airjet looms.
Brazil Weaving machines (looms).
China 3 single m/c, one multi wipe machine, face mask machine, adult diaper machine, adult pant machine,
baby diaper machine, baby pant machine, underpad machine, automatic mask making line and
accessories, carding machines, needlepunching machines/punching machines, circular knitting, complete
line of nonwoven needlepunch felts and fabric, circular knitting looms, double dot coating machine,
drum building, curing, cutting, grinding, dyeing machines, extruder, fishnet knitting, fusing machines,
stitching machines, high precision garment machines, high speed automatic needlepunching machines,
high speed beaming machines, high speed braiding machine, tipping machine, knitting, lamination,
lamination machine, hydrophilic m/c, mask making machine, melt spinning, multi excel knitting
machines, coating lines etc., nonwoven manufacturing line to produce needlepunch fabric/mask
manufacturing machine lines, power dot coating machine, PP spunbond-meltblown-spunbond nonwoven
fabric (double beam machine), PP spunbond nonwoven fabric (single beam machine), needlepunching
machine, netting machine, perforation, printing machine, PU and PVC coating machine, S4 looms,
shuttleless loom, spinning machine, stenter, fabric dyeing, embossing, laser cutting, stitching machine,
warp knitting machine, water jet looms, x fold, facemask, weaving machine & dyeing machine.
France Blow room, carding, cake press, kier, dryer, ALC card, reiter card, jetlace, hydro-entanglement unit,
processing & swabs making.
Germany Berger flock cutting, blow room, carding, cake press, kier, dryer, ALC card, reiter card, jetlace, carding
machines, needlepunching machines/punching machines, coating machine, coating machine's burners
and machine's part, continuous dyeing / washing / stenter / bleaching, dipping machine, dornier looms,
dornier machine, flame lamination, lamination machine, single needle quilting machine, looms, warp
knitting, sectional warping, direct warping, needle punch line; coating and finishing machine, calendar,
bale opener, slitter, hydroentanglement machines, nonwoven line, osthoff singeing, menzel CBR,
monforts stenter, monforts sanforizer, dot coating, printing lines, needlepunching machine, warp knit
weft insertion looms, weft insertion warp knitting machines, warp knitting machine.
Hong Kong BFL with embossing, BFL without embossing, printing & lamination.
Italy Adult diaper machine, baby diaper machine, blow room, carding, cake press, kier, dryer, brazzoli soft
flow dyeing machine, airoli washer & loop ager, coating lines, embossing machine, fibre opening line &
carding, jingye, looms, Z fold.
Japan High precision garment machines, netting machine, knitting machines, universal testing machines,
weaving machine & dyeing machine.
Netherlands VMI machine.
Poland Carding machine.
South Korea Compounding, slitting recycling, high precision garment machines, finishers and coating machine, high
strength beams.
Switzerland ALC card, reiter card, jetlace, hot air sealing machine, jakob, projectile loom.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Taiwan Circular knitting, dyeing, high speed automatic needlepunching machines, knitting, mask making
machine, melt spinning, mask manufacturing machine lines, netting machine, printing, slitting, PU resin
reactor’s, sealing machines, sizing, weaving machine & dyeing machine.
Turkey Fully automatic wet wipe manufacturing line, 2 flat pack m/c, 2 cross fold m/c.
USA Fibre opening line & carding, heat sealing machine, mask testing equipment, swab making, swaging
machine for suture and needle, tipping machine, bias binding making plant, tufting.
UK Universal testing machines, weaving looms, warping machine, twisting m/c., weaving, processing,
packing.
Europe Melt spinning, BCF, cabling, heat setting, shuttles weaving loom, weaving machines (looms) & twisters.
23.10 Export of products by Indian technical

textile product manufacturers
The Indian technical textile manufacturers have been exporting their products to various parts of the world.
The compiled list of top five products (in value terms) being exported by the respondent firms in different
segments of technical textiles are presented in the following table:
Table 23.6: Products exported by Indian technical textile manufacturing firms

Segment Products exported Countries and regions
Agrotech Fishing nets, aquaculture, nonwoven for Africa, Australia, Europe, North America , South
agriculture, twisted yarn America , Tanzania
Clothtech Hook and loop tape fasteners, interlining Germany, Turkey, UK, USA, Bangladesh, Sri Lanka,
China
Geotech Nonwoven geotextile, HDPE geocell, PET geogrid, Australia, Belgium, Bhutan, Brazil, France, Malaysia,
PP liner fabrics, soil sever, woven geotextile, Middle East, Muscat, Nepal, Netherlands, New
geotextile, nonwoven geotextile, PP woven Zealand, Norway, Philippines, Qatar, South Africa,
fabrics with different gsm & colour Spain, Sri Lanka, Turkey, UAE, UK, USA
Hometech Carpet yarns, carpets and other textile floor Australia, Belgium, Canada, Egypt, Europe, Germany,
coverings, made ups, floor covering yarns, home Japan, Middle East, Netherlands, New Zealand,
furnishing products, piconol weaving loom, wet Russia, South Africa, Sri Lanka, UAE, UK, USA
wipes
Indutech Ropes & twine, coated fabric, nonwoven fabrics, Africa, Asia, Australia, Belgium, Brazil, Canada,
nylon 6 tyre cord fabrics, solid woven, antistatic Columbia, Europe, France, Germany, Gulf countries,
PVC conveyor belt, abrasives cloth automotive Iran, Japan, Kenya, Kuwait, Nepal, Netherlands, New
yarns, canvas, chafer/cycle tyre cord fabric, Zealand, North America, Singapore, South Africa,
conveyor belting fabric, industrial textile, PVC South America, Sri Lanka, Thailand, Turkey, UAE, UK,
laminated flex, duck cotton canvas, aeronautical USA, Vietnam
textile, buff cloth, chaffer fabrics, dipped nylon
tyre cord fabrics, laminated tarpaulin, marine
application yarns, nylon filaments yarn, nylon tyre
yarn, nylon yarn, PVC coated fabrics, tarpaulin
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Meditech Nylon non absorbable suture, polypropylene Asia, Australia, Bahrain, Bangladesh, China, Croatia,
mesh, polypropylene non absorbable suture, Europe, France, Germany, Greece, Guyana, Italy,
polyester non absorbable, silk non absorbable Kenya, Korea, Maldives, Mauritius, Middle East,
suture, adult diaper, baby diaper, cotton balls, Myanmar, Nepal, New Zealand, Oman, Romania,
pad, pillows, under pad, adult pant, baby pant, Saudi Arabia, South Africa, Sri Lanka, Sudan, Sweden,
comforter & quilts, mattress pads, nonwoven Tanzania, UAE, UK, Ukraine, USA
fabrics, hydroentangled fabric, bandages, swabs,
3 ply surgical mask, absorbent cotton, bleached
gauze, roll, CTG belt, dust mask, hospital use
disposable pillows, hospital use laminated pillows,
N95 mask, pe film plain, spa disposables, surgical
disposable drapes and gowns
Mobiltech Dipped rayon tyre cord fabric, automotive fabric, China, Columbia, Czech Republic, Egypt, Hungary,
grey rayon tyre cord fabric, grey rayon yarn, Indonesia, Japan, Luxembourg, Mexico, Poland,
dipped nylon chafer fabric Romania, Slovakia, South Africa, Thailand, USA
Packtech Shopping bags, FIBC, hessian bags, sacking bags, Africa, Australia, Canada, China, Ethiopia, Europe,
jute soil saver Finland, France, Germany, Guatemala, Honduras,
Hong Kong, Ireland, Israel, Italy, Japan, Kenya,
Korea, Lebanon, Malaysia, Mauritius, Mau Tamala,
Mexico, Morocco, Netherlands, New Zealand, Peru,
Singapore, Spain, Sweden, Taiwan, Tanzania, Turkey,
UAE, Uganda, UK, USA
Protech Bullet proof helmets, bullet proof jackets, flame Australia, Egypt, Europe, Japan, Middle East Asia,
resistant garments, bitumen & wax coated Philippines, Saudi Arabia, Southeast Asia, UAE, UK
fabrics, FR coverall
Sportech Football, rugby ball, volleyball, shoes fabric, Africa, Australia, Germany, Middle East, New Zealand,
shapewear Vietnam
In terms of major export destination for these products, USA emerged as the country where largest share of
export of technical textile products from India was sold. The prominent technical textile products exported are
from Meditech, Packtech, Indutech, Geotech, Hometech segments. The products viz. shopping bags, FIBC,
hessian & sacking bags, nylon non absorbable suture, polypropylene mesh, polypropylene non absorbable
suture, polyester non absorbable, silk non absorbable suture, dipped rayon tyrecord fabric, and carpet yarns
are also being exported in large volumes.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Figure 23.29: Leading export destinations for technical textile products from India
100%
80%
60%
40%
20%
0%
pe
UK
sh
E
y
lia
ka
d
A
s
er
an
ric
UA
an
US
ra
de
an
ro
th
rm
Af
al
st
Eu
al
iL
O
Ze
Au
Ge
ng
Sr
ut
w
Ba
So
Ne
Agrotech Clothtech Geotech Hometech Indutech
Meditech Mobiltech Packtech Protech Sportech
Others include Africa, Asia, Bahrain, Belgium, Bhutan, Brazil, Canada, China, Columbia, Croatia, Czech Republic, Egypt, Ethiopia, Finland, France,
Greece, Guatemala, Gulf countries, Guyana, Honduras, Hong Kong, Hungary, Indonesia, Iran, Ireland, Israel, Italy, Japan, Kenya, Korea, Kuwait,
Lebanon, Luxembourg, Malaysia, Maldives, Mauritius, Mau Tamala, Mexico, Middle East, Middle East Asia, Morocco, Muscat, Myanmar, Nepal,
Netherlands, North America, Norway, Oman, Peru, Philippines, Poland, Qatar, Romania, Russia, Saudi Arabia, Singapore, Slovakia, South America,
South East Asia, Spain, Sudan, Sweden, Taiwan, Tanzania, Thailand, Turkey, Uganda, Ukraine, and Vietnam.
USA is the most significant export destination for technical textile products from India for the respondent firms
(10.5 percent). Technical textile products exported to USA include FIBC, hessian bags, N95 masks, carpet
yarns, industrial and defence textiles etc. Most of the products exported are from Meditech, Indutech,
Hometech and Packtech segments.
Australia is also significant with 7.8 percent of the respondents exporting to Australia. The products being
exported are FIBC, CTG belt, shopping bags, fishing nets, carpets and other textile floor coverings etc. The
products of Meditech, Indutech, Agrotech and Hometech segments comprise majority of exports to Australia.
UK is the third largest player which imports technical textile products from India as reported by 6.2 percent of
the respondents. HDPE geocell, medical pillows, canvas, shopping bags and clothing textile are some of the
products being exported to UK. Products exported to UK are mainly from Meditech, Indutech, Packtech and
Geotech segments.
UAE is another important export destination with HDPE geocell, medical pillows, canvas, shopping bags and
clothing textile being some of the products being exported to UAE. Meditech, Indutech, Packtech and
Hometech are the major segments of which technical textile products are being exported to UAE. Fishing nets,
bullet proof jackets and helmets, ropes and twine are some of the products that are being exported to
Germany.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
23.11 Foreign Investments in technical textiles

A number of respondent firms reported foreign investments received by them for technical textiles in the past
five years. These investments are not only in the form of Foreign Direct Investment (FDI) but of other types
as well. The following table presents a brief summary of these foreign investments:
Table 23.7: Summary of major Foreign Investments related to Technical Textiles (2015-
20)
Name of the Investing

Type of Investment Segments of Investment Investment details
Country
Most of the respondent firms Investments were The technical textile Investments reported
reported foreign investment made in varied forms segments that attracted were made in the
from: including: foreign investment are as context of:
• Germany • Strategic Alliance follows: • Asset acquisition
• Singapore • Equity Capital • Clothtech • Technology and
• Japan Investment • Geotech raw material
USA, Belgium and China were • FDI • Hometech related
also amongst the reported • Joint Venture • Meditech • Capacity
countries. • Mobiltech enhancement
• Protech
The size of investments ranged between Rs. 1.60 Crores to Rs. 40 Crores with average investment size being
around Rs. 11 Crores. None of the reported investments were made under any Central/State Government
Schemes or plans.
23.12 Manpower and Employment

The manpower and employment status of respondent firms can be gauged from the figure and table given
below. Skilled workforce is around 51 percent of the total workforce employed, semi-skilled workforce is
around 21 percent and unskilled workforce 28 percent of the workforce. 37 percent of the respondent firms
reported having employees with formal textile education. The numbers of such employees totalled 4,142
(2017-18), 4,294 (2018-19) and 4,893 (2019-20).
Table 23.8: Manpower and employment in the respondent firms

Financial Year Skilled Semi-Skilled Unskilled Total Manpower
2017-18 25,020 9,572 12,847 47,439
2018-19 26,065 10,457 14,498 51,020
2019-20 27,636 12,038 15,068 54,742
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Figure 23.30: Employment details: Skilled, semi-skilled and unskilled employees (Numbers)
54,742
51,020
47,439
27,636
26,065
25,020
15,068
14,498
12,847
12,038
10,457
9,572
2017-18 2018-19 2019-20
Skilled Semi-Skilled Unskilled Total Manpower
The number of skilled people employed in the respondent firms increased from 25,020 in 2017-2018 to 27,636
in 2019-2020, showing a growth of 10.5 percent. During the same period, the total number of people
employed increased from 47,439 to 54,742 implying a growth of 15.4 percent.
23.13 Employee training programmes

Different types of training programmes are conducted for the employees of technical textile product
manufacturing firms to equip their employees with skills required to perform their duties more efficiently and
effectively. Many training programmes are organized as workshops and seminars consisting of multiple
sessions while there are also others which are spread over a larger period of time and which consist of
_______________________________________________________________________________________________

___________________________________________________________________________________________________
sessions/workshops at regular intervals. Programmes are organized under multiple functional areas ranging
from operations and maintenance, quality, technical, management, soft skills and legal & administration.
The information presented in the table that is shown below is a summary of the key programmes under each
domain as per what has been reported by the respondent firms:
Table 23.9: Training programmes conducted for employees of Technical Textile product
Category of training
Programme Details
programme
● SOP
● Inventory Management
● Fire & Safety Emergency Response (Fire Mock drill)
● First Aid
● Waste Management
● Power Saving
● Machine Operation SOP Awareness Training
● Hazard Identification and Risk Assessment
● Department Work Instruction
Operations & Maintenance
● Health and Safety
Training Programmes
● Use of PPE
● Industrial Safety Training
● Safe Start Module
● Material Stacking
● Flow Wrapper HMI Operation and Setting
● Material Transportation
● Vestibule Training
● Refresher Training
● Apprenticeship Training
● ISO
o ISO 9001:2015
o EN ISO 13485:2016
o ISO 14971
o ISO 17025
o ISO 9001
o ISO 45001
o ISO 14001
o ISO 5001
Quality Training Programmes
o Lead Auditor for ISO Certification
● GMP (Good Manufacturing Processes)
● QC (Quality Control)
● KAIZEN
● 5S: Japanese Principles for enhancing Profitability
● NABL
● Operational Excellence
● Product Safety & Conformity Representative Training
● 1.5 S Awareness
_______________________________________________________________________________________________

___________________________________________________________________________________________________
● Internal Auditors Course

● Advanced product quality planning (APQP)
● Production part approval process (PPAP)
● 7 Quality Tools
● 8D Analysis
● Design Failure Mode and Effects Analysis
● Process Failure Mode and Effects Analysis
● Control Plan
● DMAIC Project
● Lean & Six Sigma
● TQM Training
● Process Control
● Business social compliance initiative (BSCI)
● Environmental Training
● 5S Sustenance Training
● Innovation and Sustainability
● IMS (Integrated Management System)

Management Training ● Inventory Management
Programmes ● Process Management
● 8D Problem Solving
● Technical IIP
● Technical Garment Making
● Technical Protective Textiles Training
● On the job Training
Technical Training
● Production training
Programmes
● Software training
● Chemical Management/Handling
● Card-feed roll metal detector
● Material Pass Box
● Time Management
● Seven habits of highly effective people
● Drug addiction/awareness
Soft Skills Training
● Ethical Training
Programmes
● Team Building
● Personal Hygiene
● 7S and Hygiene Practices
23.14 Other technical textile segments of

interest
Future diversification preferences
It was observed through the findings of the primary survey that significant percentage (69 percent) of
respondent firms plan to diversify their operations into newer segments of the technical textile industry in
order to unlock the lucrative opportunities they perceive in those segments.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Diversification into other segments in future

Figure 23.31: Preference for future diversification (percentage respondents)
31%
13% 13%
9% 9%
6% 6% 6%
3% 3%
n
h
h
ch
h
ch
h
h
ec
ec
ec
io
ec
ec
ec
ec
Te
Te
t
iT
hT
oT
oT
eT
ilT
oT
ca
du
ro
ed
ob
ifi
m
Ge
Pr
ot
ek
Ag
In
rs
Ho
Cl
ve
di
No
Out of the respondent firms that reported their plans for diversification into newer technical textile segments,
Indutech and Protech segments emerged as the most desired option with around 13 percent of the
respondent firms expressing their intent to enter those segments. The respondent firms see major growth
potential and scope in these segments and are keen to diversify into these segments in the coming years.
Agrotech (9 percent) and Meditech (9 percent) were the next most preferred segments for diversification,
followed by Clothtech (6 percent), Hometech (6 percent) and Mobiltech (6 percent). Geotech (3 percent) and
Packtech (3 percent) seemed to elicit lesser interest among the respondents.
It is also to be noted that almost 31 percent of the respondent firms reported no plans for diversification into
new segments. While some firms didn’t identify their sectors of diversification yet, some also reported losses
in their current business as the reason for not taking up diversification so far.
Reasons for Diversification
The firms mentioned the following reasons for their intent to diversify:
• Higher potential for growth in business related to the user industries (Indutech, Hometech, Meditech)
• Greater potential, and availability of specialised and research-oriented products (Clothtech, Meditech)
• Technological advancements leading to huge growth potential, safety and sustainability (Meditech,
Agrotech)
• Niche markets and availability of infrastructure and manpower, hence scope for growth (Geotech,
Protech)
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Expansion in the current operating segment by Technical Textile product

manufacturing firms
A good number of respondent firms reported their preferences for expanding their product portfolio in the
technical textile segment that they are currently in. Few firms expressed their preferences for integrating
backwards in their current segments i.e. producing raw materials required for production of goods in the
technical textile segment in addition to the products they are currently manufacturing.
Figure 23.32: Preference for expansion in current operating segment (percentage respondents)
19% 19%
15% 15%
8% 8% 8%
4% 4%
ch
h
ch
h
ch
h
ch
h
ec
ec
ec
ec
ec
te
te
te
ite
ot
et
ilt
ht
ot
ck
ro
du
ed
ob
m
Pr
Ge
ot
Ag
Pa
In
M
Ho
Cl
Out of the respondent firms which reported their intent either for expansion of product portfolio in their
current segment or for backward integration, the firms operating in Geotech (19 percent) and Protech (19
percent) topped the list. In the Clothtech and Meditech segments, 15 percent of the respondent firms wanted
to continue in the current segment itself. It was followed by firms in Hometech, Indutech, Mobiltech, Agrotech
and Packtech.
Reasons for expansion in the current operating segment
Some of the reasons cited by the respondent firms for continuing in their current segment or integrating
backwards are as follows:
• Good business performance in the current segment and in-house expertise in sales and technical
acumen is available (Geotech)
• The current segment is characterised by high imports of raw material as well as finished products
(Protech)
_______________________________________________________________________________________________

___________________________________________________________________________________________________
• Perceive the current technical textile segment as having a good growth potential (Clothtech)
• There is less competition in the current segment and marketing edge through better quality can be
ensured through investment in product development (Agrotech)
• Producing raw materials for products might also give access to new segments in future because many
raw materials are common to a number of segments (Mobiltech)
23.15 Porter’s five force analysis of technical

textile product industry in India
Porter's Five Forces is one of the most popular and highly regarded business strategy tools for understanding
the competitiveness of one’s business environment, and for identifying one’s strategy's potential profitability.
The tool was created by Prof. Michael Porter from Harvard Business School to analyse an industry's
attractiveness and likely profitability. According to the model, there are five permanent forces that are main
sources of sustained competitive pressure, and these therefore constitute firm’s competitive environment in its
industry as distinct from temporary factors like industry growth rates, government interventions, and
technological innovations which have only a short term effect. These five forces are listed as follows:
1. Threat from New Entrants: This force is a function of the degree of ease with which new firms can
enter the industry and affect the profitability of incumbent firms. It can influence the strategies that
incumbent firm will follow to protect itself from the threat posed and to attempt and erect entry
barriers.
2. Threat of Substitutes: It refers to the ease with which the customers can find a different method or
product to satisfy the same needs that your offerings satisfy. This has an impact on customers’
response to sellers’ offerings and sellers’ flexibility of changing business strategies.
3. Bargaining Power of Buyers: Comprises of number of buyers and scale of their orders. It affects the
ability of buyers to dictate their terms as well as their costs of switching from one seller to another.
4. Competitive rivalry: Consists of number and strength of competitors. It determines one’s response
(aggressive or otherwise) and profitability as well as response of the customers (degree of loyalty and
price sensitivity).
5. Bargaining Power of Suppliers: Comprises of number of suppliers and uniqueness of their offerings. It
influences the pricing strategy of suppliers as well as one’s flexibility to switch suppliers.
The following table and figure present the findings of the responses received from the firms on a five-point
Likert scale based on their understanding of these five forces in the technical textile industry.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Table 23.10: Porter five-force score of respondent firms manufacturing technical textile
products in India
S. No. Force Average score on a five point Likert scale
1 Threat of new Entrants 3.20
2 Threat of Substitutes 3.37
3 Bargaining Power of Buyers 3.56
4 Bargaining Power of Suppliers 2.80
5 Competitive Rivalry 3.91
Source: Primary survey of product manufacturing firms carried out by IIT Delhi
Figure 23.33: Porter’s five forces in the Indian technical textile industry
Threat of new
Entrants
5.00
4.00
3.00
2.00 Threat of
Industry Rivalry
1.00 Substitutes
0.00
Bargaining Power Bargaining Power

of Suppliers of Buyers
The reasons, as reported by the respondent firms, regarding the presence/absence of the force as well as
their associated intensity (‘+’ and ‘++’ represent affirmation of the statement and their relative intensity with
‘+’ being relatively less intense/frequent than ‘++’; On the other hand ‘–‘ and ‘- -‘ are negations with ‘-‘ being
relatively less intensely negative than ‘- -‘ ) are presented in the Table below.
Table 23.11: Reasons behind the prevalence of Porter’s five forces in Indian technical
textile industry: Respondents views
Porter’s Five-Force Intensity
1 Threat of New Entrants
There is increase in domestic demand due to which more firms are likely to enter this +
industry
Reduction in imports by putting restrictions on China will provide better opportunities to ++

domestic products. Hence, more firms are likely to enter this industry
Government promoting technical textiles industry will encourage entry of new players ++
High capital expenditure is required to enter this industry --
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Policies of Government regarding FTA do not support this industry to be globally -

competitive
High level of knowhow and R&D is required --
Demand is less compared to supply capacity due to which there are low profits -
Competition from cheap imports from China discourages new entrants --
2 Threat of Substitutes
To bring down the cost of existing products, substitute products might be produced ++
Expected shift of businesses from China to India will encourage domestic players to +
produce substitute products
Technology change in technical textiles industry is rapid ++
To cater to rapidly increasing demand for many of the technical textile products, ++
substitute products may be produced
Emphasis on ‘Make in India’ programme will promote local production ++
There is no substitute to eliminate use of some specific products -
High Tech products do require high investment in R&D --
There is no substitute for the raw material currently in use in India -
India lags in access to modern technology to produce new substitute products -
3 Bargaining Power of Buyers
There is less of domestic demand in comparison with the supply (domestic production +
added to imports) in some segments
Cheap Chinese products are imported and are readily available in due to which the buyer ++
expects that domestic producer should offer products at similar price levels
In case of a few products, the large organisational buyers comprise bulk of demand due ++
to which they have high bargaining power
In few segments, the buyers have more choices due to more number of options +
In some cases, the buyers want very specific product characteristics that are achieved -
only by a few sellers. In cases, the buyers do not have high bargaining power
4 Bargaining Power of Suppliers
Due to high dependence on imports for the raw inputs, the domestic producer of technical ++
textiles products has to compromise and adjust with the supplies from overseas supplier
There is a high bargaining power of supplier in case of an input for which there is ++
monopoly or near monopoly of the supplier
In case of the customers’ demand being inelastic and specific, the bargaining power of +
supplier is more
If the input to technical textile producer is produced domestically, the bargaining power of ++
supplier is more
In a few speciality products/segments, the suppliers dominate the market +
_______________________________________________________________________________________________

___________________________________________________________________________________________________
In the case of some of the inputs, there are only limited sources of supply because --
production of input is highly capital intensive industry
In case of some inputs being readily available in abundance, the bargaining power of -
supplier is low
If the prices and extent of competition among Chinese supplier is high then the bargaining -
power of suppliers is low
Due to domestic supplier not being able to maintain consistent quality, their bargaining --
power is reduced
Due to huge production capacity in China which is lying spare in some cases, the -
bargaining power of suppliers is reduced
5 Competitive Rivalry
There is lower domestic demand compared to the available supply in case of some of the +
products in a few segments
There already is intense competition in case of products that are popular and are ++
consumed by large number of consumers
Due to liberalised imports and dumping by the Chinese suppliers, there is intense +
competition from cheap imports
Due to increased awareness and easing of availability of technical knowhow, there is an +

increase in the number of firms entering this industry in response to positive demand
outlook.
There are certain products for which competition is low -
It is apparent from the presentation of the reasons that the ‘threat of substitutes’ is fairly high for the firms in
this industry. This is characteristic of any industry in its early stages of development and which is true for
Indian technical textile industry too. The rapid changes in technologies in the quest for better quality product
substitutes available in larger quantities at ever decreasing prices makes it a constantly evolving market. The
highly dynamic character of the market and technology landscape is a significant threat which Indian firms
must face in this industry.
The ‘bargaining power of suppliers’ is another important threat that the Indian firms face. This is due to a very
high dependence of product manufacturing firms of Indian technical textile industry on imported raw material.
The situation is further compounded by the fact that most of the raw material comes from a single country
(China) and in many cases the suppliers either have a monopoly or are part of an oligopoly.
Apart from these intense threats, there are other moderate level of threats too as evident from the responses
of product manufacturing firms being processed using Porter’s five force analysis frameworks. The details of
each factor can be seen from the information presented in the table above.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
23.16 Problems faced and suggestions offered

by technical textiles manufacturing firms
Table 23.12: Machines related problems faced by technical textile manufacturing firms
Problems Suggestions
There is a high dependence on high priced imported Government should provide financial and physical support
machinery supplied by Japanese, German and for encouraging R&D that is aimed at promoting
Taiwanese suppliers which results in high business indigenous manufacturing of machines
costs and longer lead times
The domestic market for technical textiles is not big Government should provide incentives focused at local,
enough to justify the high capital expenditure home-grown innovations in machine development as well
requirement and long gestation period for as manufacturing within India not only for domestic
development of indigenous machines market but also for exports
Less than satisfactory quality of after-sales service Consumer Affairs department to formulate stringent laws
and support from domestic machine suppliers for penalising deficient service in B2B markets
Table 23.13: Trained Staff related problems faced by technical textile manufacturing firms
Scarcity of trained Skill India should cover training of workers for Technical Textiles sector
staff More training capacity must be created specifically for technical textiles
Table 23.14: Technology related problems faced by technical textile manufacturing firms
Heavy dependence on imports from overseas Government must encourage initiatives that lead to technology
partners transfer so as to minimize the dependency on imports
The market is not big enough to justify the high Government must simplify the Technology Upgradation Fund
capital investment and lengthy gestation period (TUF) scheme to further reduce the cost of upgradation
There is a lack of information and knowledge Government should take relevant steps to enable availability of
regarding advanced technology and automation new technology at affordable price in India on large scale
Testing infrastructure in India is not robust Government should invest in enhancement of the testing
infrastructure so that the trial of new products can be conducted
smoothly
Table 23.15: Government Policy related problems faced by technical textile manufacturing
firms
Cash flow cycle has been disturbed due to To minimise the negative impact of differential GST rates on the
difference in GST rates of raw materials (18 cash cycle, the payment of GST refund to firms should be
percent) and finished goods (5 percent) quickened and simplified by the Government
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Even as medical facilities in urban areas are using Government must make it mandatory to use disposable apparel,
disposable apparels / drapes, hospitals, the health drapes and linen in health facilities to the extent possible
facilities in rural areas are yet to adopt disposable
products compelling them to use washable linen
There are several masks available in the market Government should make it mandatory to use only those masks
which do not have proper government that have proper government certification
certification
Fabric imports are hurting local manufacturing Government should impose Anti-dumping duty on fabrics
primarily due to absence of anti-dumping duty imported from China, Bangladesh Nepal and UAE
The export process is highly cumbersome due to Government should provide assistance in the form of making
heavy dependency on offline procedures procedure online to ease the process. Easy online application
and training videos should be disseminated for maximum
adoption of online process
Current government schemes such as TUFS and Government must provide TUFS/ PLIs on on-going basis and
PLI are not user friendly quick processing to realize the benefit
Very low demand of products manufactured in Government must carry out periodic review of incentives so that
India they are effective in promotion of quality products and
standards to improve the quality as well as the output
Table 23.16: Other problems faced by technical textile manufacturing firms

Delay in issuance of license and The overall efficiency of the portal should be improved
certificate due to inefficient online
portal
Non-acceptance of test reports of Appropriate bilateral trade agreements should be signed
Indian laboratories by overseas Indian recognised test houses should acquire accreditation for testing as
customers per the standards accepted in importing countries
_______________________________________________________________________________________________

24. Fibre, Filament and
Technical Yarn
Manufacturing Firms:
Findings from Primary Survey
Responses received from firms who produce and supply raw materials (fibres, filament and technical yarns) to
technical textiles product manufacturing firms in India are presented in this section.
24.1 Types and forms of fibres, filaments and technical yarns

produced by Indian raw material manufacturing firms
The different types of raw material (polyester-based, acrylic-based, and others) manufactured by the
respondent firms are listed in the following table:
Table 24.1: Type and forms of fibres, filaments and technical yarns manufactured in India
Type of fibre, filament or
Form of fibre, filament or technical yarn manufactured
technical yarn type
Polyester-based • Polyester staple fibre
o Solid, hollow and dyed
o Reinforcement fibre
o Pet flakes/pet chips/nonwoven fire retardant
o Anti-bacterial
• Polyester industrial filament yarn
Acrylic-based • Staple fibre
o Tow
o Yarn
o Tops
Others • Mono-filaments and multi-filaments of Nylon6 and Nylon66
• HDPE
• Polypropylene stable fibre
• Co polyamides
• Polypropylene fibre
Most of the respondent firms reported manufacture of polyester-based raw materials; within that, staple fibre
and filament yarn are the most prominent materials. In case of acrylic-based material, a large number of
respondent firms produce staple fibre in the form of yarn, tops and tow. Some manufacturers also produce
mono-filament and multi-filament yarn of Nylon along with HDPE and co-polyamides.
_______________________________________________________________________________________________

Section 24: Fibre, filament and technical yarn manufacturing firms
___________________________________________________________________________________________________
24.2 Segment-wise supply of fibre, filament, and technical yarns by

raw material manufacturers in India
The supply of raw materials to different segments of technical textiles in India by the respondent firms is
presented in the following table:
Table 24.2: Segment-wise raw materials supplied by raw material manufacturers in India
Segment Raw Materials Supplied
Agrotech Recycled polyester staple fibre/ polypropylene staple fibre
Nylon 6, co polyamides, polyester and HDPE monofilament and nylon 6 multifilament, and twines
Buildtech HDPE monofilaments
Polyester industrial filament yarn
Clothtech Polyester staple fibre, PP fibre
Geotech Recycled polyester staple fibre/ polypropylene staple fibre
Hometech Recycled polyester staple fibre/ polypropylene staple fibre
Indutech Recycled polyester staple fibre/ polypropylene staple fibre
Meditech Recycled polyester staple fibre/ polypropylene staple fibre
Nylon 6 and nylon 66, polyester, PP, HDPE, PBT monofilaments, and nylon 6 and nylon 66
multifilament
Packtech Recycled polyester staple fibre/ polypropylene staple fibre
Mobiltech Recycled polyester staple fibre/ polypropylene staple fibre
Nylon 6, nylon 66 and PP monofilaments
_______________________________________________________________________________________________

___________________________________________________________________________________________________
24.3 Production of fibre, filament, and technical yarn manufacturers

The total production capacity and output varies across respondent firms. Although, the cumulative production
capacity of respondent firms has remained stable around 180 thousand MT over last three years, there has
been a growth of 1.26% in the production capacity. At this growth rate, the projected production capacity for
the years 2020-21 and 2021-22 can be around 184 thousand MT and 186 thousand MT respectively.
The cumulative quantity produced by them has increased every year from around 140 thousand MT to 160
thousand MT in the last three years, which is likely to be in response to an increasing demand for raw
materials. The data shows a growth of 6.7% in quantity produced and an estimated value of 170 thousand
MT and 180 thousand MT respectively for the years 2020-21 and 2021-22. The capacity utilization has
consistently increased from 78.3% to 86.7% for the respondent firms during the stated period indicating
better utilisation of resources by the firms.
Figure 24.1: Production capacity and quantity produced by respondent raw material manufacturing firms in India
200 88
180
86
160
84
In Thousand Metric Tonne
140
Percentage Value
82
120
100 80
80
78
60
76
40
74
20
0 72
2017-18 2018-19 2019-20
Total Production Capacity Total Quantity Produced Utilization
Source: Primary Survey , IIT Delhi
In terms of supply of raw materials to the domestic and global markets, most of the respondent firms supply
most of their output to the domestic market whereas a few respondent firms also reported supplying around
60% to 80% in the domestic market and the balance to export market. The United States, UAE and Brazil
were reported as the leading markets for Indian manmade fibre and polyester fabrics.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
24.4 Consumers of fibre, filament and technical yarns in the technical

textile sector in India
Fibre, filament or technical yarns, manufactured by respondent raw material manufacturers are generally used
by firms operating in Agrotech, Buildtech, Clothtech, Geotech, Hometech, Indutech, Meditech, Packtech and
Mobiltech segments.
Table 24.3: Type and forms of fibre, filament and technical yarn manufactured in India
Name of the fibre, fabric and technical yarn Consumer Segments
Agrotech, Buildtech, Clothtech, Geotech, Hometech, Indutech,
Polyester stable fibre
Meditech, Packtech, Mobiltech
Polyester filament high tenacity yarn Buildtech, Geotech, Indutech
Nylon 6, nylon66 and polyester monofilament yarn Agrotech, Indutech, Mobiltech
Nylon 6 multifilament yarn Agrotech, Indutech
24.5 Import of raw materials from outside India to produce fibre,

filament or technical yarn
The respondent firms reported import of materials such as SMBS, DMF, Titanium Oxide, VAM, CAN (acrylic-
based) which are sourced from Europe, US and China.
Table 24.4: Import of raw materials by fibre, filament, and technical yarn
manufacturers in India
Type of
Raw material imported Countries from where raw material is imported
fibre
Polyester Granules Europe
Polyester
PET lumps/chips USA, Europe, Nigeria, Poland, Saudi Arabia, France
Polyamide (Nylon) 66 granules USA, Europe
Nylon 66
Co-polyamides granules Europe
Sodium metabisulphite (SMBS) Germany, Thailand, Turkey
Dimethyl Formamide (DMF) Saudi Arabia, China, Europe (Germany)

Acrylic
Titanium Dioxide Germany
Vinyl Acetate Monomer (VAM) Singapore, Korea, US, China, Saudi Arabia
Acrylonitrile (ACN) Korea, USA, Europe, Singapore, China, Brazil
The respondent firms reported poor availability of SMBS, DMF and titanium dioxide in India. They also
reported that the incentives offered to importers by exporting firms in Singapore for raw materials like VAM
and CAN make it lucrative for Indian firms to import from them. Raw material manufacturers import polyester
(PET) lumps/chips/flakes and granules from Europe, USA, Nigeria, Poland, Saudi Arabia and France. Other
type of fibres, like PA66 and co-polyamides, are also imported from USA and Europe.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
24.6 Manpower engaged in raw material manufacturing

Manpower requirements can be grouped into skilled, semi-skilled and unskilled labour. Of the total
manpower employed, the respondent firms reported that skilled labour constitutes 31 percent to 49 percent
of the total manpower, semi-skilled labour ranged from 28 percent to 38 percent, while unskilled labour
ranged from 23 percent to 31 percent. This indicates a relatively high dependence of firms on skilled labour.
In terms of shortfall between available and required workforce, the only shortfall reported was in skilled
workforce category.
24.7 Emerging segments and products in the technical textile

industry
Respondents identified Buildtech, Meditech, Mobiltech, Geotech and Indutech as the emerging segments of
technical textiles for which there is a rapidly growing demand in the Indian market. Clothtech and Hometech
were reported by raw material manufacturers as the emerging segments for which there is a high demand in
the international market. Products expected to have a high demand in domestic market include those in
Mobiltech segment (airbags, seat belts and super high tenacity yarns), Geotech segment (polyester grids and
UV stabilised high tenacity low elongation yarn) and Indutech segment (polyester activated adhesive yarn).
24.8 Technical collaborations undertaken by fibre, filament, and

technical yarn manufacturing firms in India
Technology transfer and machinery imports are two most common forms of foreign collaborations entered
into by Indian raw material manufacturing firms. Based on responses received, it can be inferred that the
Indian raw material manufacturers are mainly dependent on in-house technology. Some acrylic based raw
material manufacturers reported collaboration in the form of technology transfers with firms from Italy and
USA. Few collaborations in the context of machinery support have also taken place with Japanese firms.
24.9 Technological gaps faced by the raw material manufacturers

Indian manufacturers have not established sufficient capacities for production of high-performance and
functional fibres which are primarily used in protective textiles (ballistic and fire protection), ropes, composites
and sports textiles. Para-aramid fibres (Kevlar, Technora, Twaron, etc.), meta-aramid fibres (Nomex), gel
spun UHMWPE fibres (Dyneema, Spectra), carbon fibres and Nylon 66 fibres. These are imported from
countries like USA, Japan, The Netherlands, etc. Functional fibres (antibacterial, heat retaining, UV protective,
moisture management) are also not being manufactured by Indian manufacturers. The processes and
technologies required for them have been developed on a pilot scale. However, scaling up is proving to be
difficult because the size of the domestic market is not yet large and attractive enough for raw material
manufacturers to invest in setting up production capacities.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
The respondent firms reported significant limitations of in-house technology as well as that of inadequate
number of technically trained professionals. In addition, lack of domestic machinery manufacturers/suppliers
results in heavy dependence on imported equipment, which adds to the cost of production. Testing facilities
for downstream applications are inadequate and it acts as a constraint for raw material manufacturers and
prevents them from adopting new techniques and methods that are better aligned with the demands of their
customers.
Respondent firms offered several suggestions to overcome the challenges. Measures should be introduced to
encourage foreign collaborations including joint ventures in the field of technical textiles. R&D infrastructure in
the country should be scaled up significantly. Attractive incentives should be offered for promoting local
manufacture of machines. Centralised testing facilities for different downstream applications should be
established. Prototype machines should be installed at these centralised facilities and these should be
managed by technically competent personnel. These machines must be for covering, warping, weaving, heat
setting, stentering, coating, curing, adhesion etc. Application-based testing facilities should be established for
testing characteristics of finished goods, such as flame retardance, dust repellence, UV and colour fastness,
adhesion, abrasion, creep of Geotextiles etc.
24.10 Suggestions to promote domestic manufacturing of raw

materials in India
The respondent firms gave several suggestions to improve the eco-systems of raw material production for
technical textile industry in India. These suggestions are stated as follows:
• Establishment of more capacity in academic institutions for teaching and training in technical textiles
so as to make adequate level of skilled manpower available. Institutions and courses can be improved
with the help of public-private partnership (PPP) mode.
• Entering into more free trade agreements (FTAs) with countries that have a high demand for raw
materials from India.
• Setting up of application-based testing facilities with subsidies for prototype machineries and third-
party accredited testing facilities.
• Promotion of technology upgradation fund scheme (TUFS/ ATUFS) among yarn manufacturers by
providing subsidies for upgrading the testing and manufacturing facilities.
• Taking steps to prevent dumping of industrial yarn (IDY) and other downstream products by countries
with surplus production. Preventing circumvention of anti-dumping duty (ADD) provisions and evasion
of ADD by Chinese suppliers of products such as 940 D HT, 940 LS & 6100 D HT.
• Inclusion of polyester-based industrial yarns in BIS standards to promote product applications in

Geotextiles, conveyor belts, tyre cords, lifting equipment etc.
• Promotion and incentivisation of environment-friendly technologies by manufacturers (for example

recycling of plastic and polyester (PET) waste).
_______________________________________________________________________________________________

25. Technical Textile
Machine Manufacturing
Firms: Findings from Primary Survey
The findings from the responses received from the machine manufacturing firms who supply machines to the
technical textile product manufacturers in India are presented in the following paragraphs.
25.1 Functions performed by technical textile

machine manufacturing firms
The respondent firms are engaged in various functions related to machine manufacturing such as assembly,
importing components and machines as well as exporting components, assemblies and machines. Around 50
percent of the respondents manufacture machines for technical textiles producers in India. Almost all of the
respondent firms reported that they were importing machines and/or machine components into India. Some
of the respondent firms were representatives/agents (25%) of foreign firms as well. Around 58 percent of the
respondents were subsidiaries/ branches of international machine manufacturers and were engaged in various
activities pertaining to machine manufacturing in India.
25.2 Types of machines manufactured/

assembled/ imported/ marketed by the firms
The respondent firms manufacture, assemble, import as well as market various types of technical textiles
machines in India. The details are presented in the following table.
_______________________________________________________________________________________________

Section 25: Technical Textile machine manufacturing firms
___________________________________________________________________________________________________
Table 25.1: Machines manufactured, assembled, imported and marketed by the respondent
firms
Machines Manufactured Machines Imported Machines Marketed
• High speed rapier looms • Blow room • Rapier and air jet weaving
• High speed air jet looms • Carding machine machines
• Machine components • Web card • Curling range for technical
• Biaxial warp knitting • Nonwoven card clothing textiles
• Multiaxial warp knitting • Air texturising machines • Multi-functional coating
heads
• Uni-directional/spreading • Air covering machines
• Calendars For technical
• Warp knitting with weft insertion • Heavy duty rewinders and
textiles
• Warper/ Sectional warper assembly winders
• Technical textile stenters
• Direct warper for filament • Rapier and airjet weaving
• Radio frequency dryer for
• Polybeamer for PP/HDPE Tapes machines
technical textiles
• Fully automatic nonwoven bag making • Nonwoven
• Process control equipment
machine, box bag making machine, fruit • Raschel knitting
• Circular knitting
cover making machine, loop handle making • Shoddy yarn machine
machine, bag printing machine, face mask • Sectional warping machine
making machine • Nonwovens
Some respondent firms also reported assembling of machines such as direct warper for filament, sectional
warping machine and machines for nonwovens. It is apparent from the information presented in the table
shown above that even though a number of machines are being manufactured in India for technical textile
industry, most of these are of older generation and used by production units that use relatively older
technology for production of technical textiles. Very often, the machines made in India are also less than
optimal for speed and quality. Manufacturers of technical textiles who use contemporary technology are still
dependent on imported machines.
25.3 Supply of machines to various segments of

technical textile industry in India
Segment wise details of machines being supplied by the respondent firms are presented in the following table:
Table 25.2: Machines supplied to various segments of technical textiles

Technical Textile Segment Machines/ Accessories Supplied
Meditech, Hometech, Sportech,
Blow room, Web card C 70, air texturizing machines, nonwoven machines
Clothtech
TMT industrial yarn, rapier weaving machine, tyre cord air jet machines, sectional
Indutech, Mobiltech, Geotech
warping machine
Bi/Multiaxial for composite glass, warp knitting for geogrid, warp knitting for
Geotech, Buildtech, Indutech
billboard
Geotech, Packtech Poly beamer, warper for WP knit
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Direct warper for filament, direct warper for warp knitting, nonwoven bag making
Agrotech, Buildtech
machine
Felting needles, jet strips, weaving accessories, weaving preparatory machines
Various Segments (knotting machines, drawing-in machines & cleaning machines), knitting needles,
sewing needles, tufting components, card wire
25.4 Import of Machines

Machine manufacturing for technical textiles remains very limited in India. This is corroborated by the fact that
most of the respondent firms reported that they import machines/machine components from outside India
(Germany:33%, Japan: 25%, Italy: 25% and China: 25%) and some of them import these from Switzerland
and Belgium. Details of these imports are presented in the following table:
Table 25.3: Technical textiles related machines imported in India

Name of the Country Machines/machine components Incentives/benefits reportedly
and percentage of imported associated with import from the
respondents particular country
importing
Germany (33%) • Felting needles, jet strips weaving • Precise drive controls leading to
accessories, weaving preparatory improved machine performance.
machines, knitting needles sewing • Good quality
needles, tufting components, card wire
• Nonwovens machines
• Complete lines and individual machines
for making high quality nonwovens
from staple fibres through needle
punch process, hydroentanglement
machine, thermal bond and chemical
bond process (partly with partners)
Japan (25%) • Waterjet loom • CEPA certificate for zero import duty
• Pneumatics • Reliability of product performance
Italy (25%) • Air texturising • Higher process flexibility
• Gear Box
China (25%) • Nonwoven • Cheaper rates
• Raschel warp knitting
• Ultrasonic and other components
Switzerland (8%) • Blow room, web card • State of the art technology
• Heavy duty winders, air covering,
nonwoven card clothing
25.5 Measures suggested to promote machine

manufacturers for technical textile industry
The respondent firms suggested several measures that can be introduced to promote machine manufacturers
of technical textiles in India.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
• One of the key problems that machine manufacturing firms face is the long time taken for delivering
the machine. Since most of the machines are special purpose machines which have to be customised
many a times, it often takes two years or more to deliver the machines. Hence government must
introduce a series of supporting measures to help the machine manufacturing firms to cope with
financial requirements of lengthy time cycle involved. Amendments and addition of provisions may be
required in ATUFS.
• India needs an institution of global standards which promotes Indian machine manufacturers for
technical textile units. In due course this will increase the demand for Indian made machines for technical
textiles in India. The Government should also approve more research and development projects in the
technical textile machine manufacturing domain.
• The Government should provide financial incentives to encourage machine manufacturers of technical
textiles to expand and modernise their capacity by providing them subsidies such as interest subsidy,
capital subsidy, and tax benefits, manageable loan sanctions, etc.
• Despite the high market potential and current set of incentives from the Government, opportunities for
machine manufacturers for technical textile is constrained due to limited volumes and less variety of
products produced in India. This is able to attract only a small number of domestic machine
manufacturers due to unviable business model. Hence, there is high import dependence for technical
textile machines in India.
• Currently, most of the research and development on manufacturing the components for technical
textiles is taken up overseas and the final outcome of the product research is imported into India for
sale to end-users. To overcome this and to promote technical textiles machine manufacturing, India
should closely follow the international efforts towards research and development and develop a range
of machines in India.
• The Government should encourage investments in various segments of technical textiles with incentives
for technology transfers.
_______________________________________________________________________________________________

26. Contribution of
Manufacturers’
Associations
Manufacturers’ associations act as an important platform for the manufacturing factory owners to work
together and act as a group to further their interests, enhance competitiveness, foster exchange and
dissemination of information that is relevant for the respective industry and improve working of the industry.
A survey of such manufacturers’ associations was carried out to elicit important information about their
respective industry. Initially, there was a list of 12 such associations that was prepared. Out of these, seven
associations which were active, were approached to obtain their individual responses. Eventually, the
responses received from four of them have been presented in this section.
The survey was followed up by secondary research about the role and contribution of manufacturers’
associations in technical textiles industry to assess the current level and effectiveness of their activities as well
as document their opinions about various facets of the industry. Summary of the responses that were
obtained are presented for each of the associations individually.
26.1 Association of Synthetic Fibre Industry

Association of Synthetic Fibre Industry (ASFI) was incorporated in 1972. It works for safeguarding the
interests of synthetic fibre producers of India. ASFI has submitted certain important information about
synthetic fibre industry which are detailed below.
As per the ASFI, the major fibres/filaments used in Technical Textiles in India are:
1. Nylon 66
2. High Tenacity Nylon 6
3. High Tenacity Polyester
4. Polypropylene
5. Ultra-High Molecular Weight Polypropylene
6. Aramid
7. Carbon Fibre
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Table 26.1: Raw material, technology, domestic demand and capacity and imports of filaments
Technology
Domestic Domestic Imports
Raw material for filament/
S. No. Filament type Demand Capacity MTPM
availability fibre
(MTPM) (MTPM)
production
100 MTPM, Low 600 MT in
650 TCF
Denier for Fabric and
1. 1. Nylon 66 Not Available Available 100 Airbag
Sewing Thread 200 MT in Yarn
150 Others
Application
High Tenacity 5000

2. 2. Available Partially Available 13500 10850
Nylon 6
High tenacity 1000

3. 3. Available Partially Available 4000 5000
Polyester
4. 4. Aramid Not Available 120 Nil 120

Not Available
15 (150-170 15 (150-170
5. 5. UHMWPE Not Available Not Available Nil MTPA)
MTPA)
20 (220-240 20 (220-240
6. 6. Carbon Fibre Not Available Not Available Nil MTPA)
MTPA)
26.1.1 Nylon 66
• The domestic market of Nylon 66 has shown a growth of 12% over the five-year period from 2015-2019.
Major growth is in Nylon 66 Tyre Cord Fabric Segment. The domestic market in India is mainly serviced
through imports.
• Due to lack of availability of raw material at affordable prices, high import duty on chips, high rates of
electric power and high investment required for setting up a new plant acting as a barrier for
entrepreneurs, the Indian technical textile product manufacturers have to depend on imports for meeting
their requirements.
• Major producers in the world are Invista, PHP, Toray, Shenma, Asahi, Ascend, and Hyosung. Invista has a
38% share in the global Nylon 66 yarn market.
26.1.2 Nylon 6 (High tenacity/Non-Apparel Application)

• India has the capability and technology to produce good quality Nylon 6 yarn. It is Indian producers who
meet a large proportion of the demand of domestic technical textile product manufacturers.
• A part of the requirement of Nylon 6 yarn is also being imported from China. Chinese producers are able
to offer yarn at a lower price due to their lower cost of production and the benefits derived from
incentives offered by the Chinese government.
• Investment required for setting up a new manufacturing unit in India is more than it is in competing
countries. The cost of manpower and electric power is also higher than the competing countries. Due to
these reasons, new plants are slow to come up in the Indian market.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
26.1.3 Polyester Industrial Filament

• The global polyester filament market has grown at a CAGR of 5% by volume; however, due to fall in
prices in the international market, the market has grown at a CAGR of only 1% in terms of value.
• Indian manufacturers have the capacity to produce 60,000 MPTA whereas the domestic demand is 50,000
MTPA. Despite India having excess capacity, 15,000 MPTA of yarn is imported from China.
• The cost of production is lower in China, and the Chinese exporters dump their yarn into the Indian
market at very low prices, making it very attractive for buyers in India.
• The sector faces similar issues as Nylon 66 and Nylon 6 – high cost of production due to unavailability of
manpower and high cost of power.
26.1.4 Aramid
• Consumption of Aramid in India is growing faster than its consumption in the global market. Since there
are no manufacturers of Aramid in India, the entire requirement is met through imports.
• The Aramid market in India is expected to grow at a high rate for the next five years due to higher
spending on bullet proof jackets.
• The Indian manufacturers who want to enter the Aramid market face the following challenges: patented
production process, closely guarded technology, little availability of technical know-how, and lack of
availability of raw materials.
• Some of the large global manufacturers are Teijin, Du Pont, Kolon Industries and Hyosung, Yantai Tayho
Advanced Materials, X-FIPER New Material, and Toray.
26.1.5 UHMWPE: Ultra High Molecular Weight Polyethylene

• The yarn is used in small quantity for manufacturing protective textiles in India. The demand is entirely
serviced through imports.
• The Indian market for UHMWPE is very small for any new manufacturer to be motivated to invest in new
production facility.
• In addition to the small market size, patented manufacturing technology, lack of availability of raw material,
and high investment, are some of the other challenges faced by any new manufacturers in India.
26.1.6 Carbon Fibre

• The domestic market for Carbon Fibre is very small (200-240 MTPA). The global capacity is higher than
the global demand.
• Manufacturing units are not coming up in India due to patented manufacturing technology, lack of
availability of raw material, high investment cost, low domestic demand, and high cost of electric power.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
• Some of the large global manufacturers are Toray, SFL, MCCFC, Teijin, Hexel, Solvay, Sonstige, and
Hyosung.
26.2 FRP (Fibreglass Reinforced Plastics)

Institute
The FRP Institute was constituted in 1999 and its members are now spread all over the country. They range
from large multinational corporations to small fabricators. The list of members includes raw material suppliers,
fabricators, machinery manufacturers, scientists, composite specialists, consultants, designers, defence
laboratories and educational institutions. The Institute works in close collaboration with industries and
institutions for upgrading the technology used for manufacturing composites and to promote the growth of
Indian composites industry.
Technical textiles are an essential part of almost all composites manufacturing processes. This section focuses
on composites related information provided by FRP Institute.
26.2.1 Indian Composites market

The Indian composites market has experienced growth over the years but it still remains very small when
compared to the global market. The market has experienced an increased use of mechanised processes,
improvement in the quality of raw materials, growth potential in renewable energy and increased
infrastructural capabilities. However, lack of awareness about composites and high raw material costs have
been major bottlenecks. Added to these is the lack of funding, limited technological capability, and limited co-
operation between the government and industry which has slowed down the growth of this sector.
The volume of composites output has been growing over the years. The estimated volume of composites
output was estimated to be around 380,000 tonnes in March 2019. The total volume of composites output in
the world was around 17,700,000 tonnes in 2019.
Total number of companies involved in producing composites is around 3000 in India. In addition to that there
are about 1750 units in the unorganised sector.
India’s Potential
Some technologies and product applications used by Indian composites manufacturers are at par with the
best in the world. Aerospace and defence sector, mainly catered to by government organisations, research
institutions and a few private companies, are performing well in terms of manufacturing capability,
technologies and output. However, there are very few organisations in this field.
Composites, as the optical fibre support member in telecommunication applications, is another sector that is
doing well. The huge volume of exports in the optical fibre communication is an evidence of the
progressiveness, cost competence and quality maintenance of Indian players in this sector.
Fast-paced innovations in manufacturing technologies related to composites are happening globally. However
there is considerable delay by Indian firms in adopting globally proven technologies. This is due to high initial
_______________________________________________________________________________________________

___________________________________________________________________________________________________
investment in machinery, high initial prices of the products and therefore limited market penetration and
growth, and, limited technological capabilities for manufacturing.
Manufacturing technologies adopted by Indian companies
• Hand lay up (also called as contact moulding)
• Pultrusion
• Vacuum Infusion method
• Filament winding
• Compression Moulding
• LRTM
• RTM
• Thermoplastic Injection Moulding
26.2.2 Application of Composites in various sectors

The applications of composites are spread across various sectors and the breakup of the volume with respect
to application sectors is given below:
Figure 26.1: Applications of Composites in various sectors
Aerospace and Others 4.0%

Defence 5.0% Wind Energy 10.0%
Telecom 9.0% Infrastructure

12.0%
Electrical /
Electronic
14.0%
Chemical /
Corrosion
9.0%
Transportation
23.0%
Building &
Construction 14.0%
Source: FRP Institute
_______________________________________________________________________________________________

___________________________________________________________________________________________________
26.2.3 Major technology gaps

• Absence of low-cost technology options: Most advanced composites processes require high initial
investment in process equipment and high operating cost of the process equipment. Absence of low cost
technology options keeps away many innovators from new product developments.
• Inadequate number of machinery manufacturers: Considering the vastness of our country, the number of
companies involved in making machinery for composites is very less.
• Adoption of mechanisation is slow: Adoption to mechanised manufacturing technologies is slow and it

negatively impacts product quality, consistency and productivity.
• Low levels of automation: Automation is not widely practiced because the volume of composites required
by the end-users is low. Manufacturers find it unattractive to make high initial investment that is required
for automation.
• Quality and reliability of composites: In some cases, end-users are not aware of the material and cannot
distinguish good quality from poor. Poor-quality products that enter the market at low prices often lead to
drastic reduction in market growth due to low level of confidence from the consumers.
• Non-Destructive Testing (NDT) of Composites: NDT is often neglected in large number of private sector
enterprises and is only being conducted in a few government organisations. There is a huge gap in
conducting NDT when compared with advanced countries.
26.2.4 Cultivating the innovation culture in India

• Reward for innovation: Efforts of successful execution of projects related to composites should be
recognised and rewarded in major events. This will motivate more enterprises to participate and bring
about faster growth.
• Co-operation among industry, academia, and government: Increased co-operation between industry,
academia and government institutions and organisations should be fostered.
• Exchange programmes: The exchange of faculty, students and industry experts with internationally
reputed educational institutions, research organisations and leading global industries should be
encouraged for Indian composites professionals to update themselves on the latest trends.
• Start-up incubation centres: Start-up incubation centres should be set up with amenities for composites
product development.
• Government funding: Funding for industry through Advanced Composites programme of Technology
Information Forecasting and Assessment Council (TIFAC) should be revived. This will be a much welcome
support for deserving units, entrepreneurs and start-ups in the field of composites.
• Export focus, import substitution and indigenisation: Various products needed by the government are
listed under the Self-Reliant India ‘Atmanirbhar’ initiative. This will create a lot of business opportunities
for Indian composites industry and stimulate innovation.
• Attracting talent: It is important to attract talent towards the composites industry. Except in aerospace
and defence sectors and to some extent in wind energy sector, the opportunities and salaries, growth
_______________________________________________________________________________________________

___________________________________________________________________________________________________
opportunities and stability are not very attractive in composites industry. If the industry is able to shift its
emphasis towards exports, then it can earn higher profits and attract and retain best talent.
26.3 Indian Textile Accessories and Machinery

Manufacturers Association (ITAMMA)
ITAMMA, formerly known as “Association of Merchants & Manufacturers of Textile Stores & Machinery (India)
was established in 1943 and is the oldest textile association in India.
ITAMMA is the voice of SMEs in the Indian textile engineering and accessories industries. They advocate for
policies and institutional support to bolster members’ capacity to innovate and spur economic growth through
the textile machinery industry.
26.3.1 Types of technical textile machines/spares in India

The following table consists of a list of machines/spares that are manufactured, supplied (through imports)
and exported by the member companies of ITAMMA. These members include Inspiron Engineering Pvt. Ltd.,
SKAAT Machine Works India Pvt. Ltd., Ashton International Pvt. Ltd., Technocraft Industries, and Bharat
Beams Pvt. Ltd.
Table 26.2: Types of technical textile machines/spares manufactured, supplied and exported from India
S. Name of machine/spares Manufactured Supplied in the Exported

No. domestic market
1 Stenters for heat-setting Yes Yes No
2 Finishing and Dryer for coating Yes Yes No

application
3 Hot air stenter machine Yes No Yes
4 Soft core and rigid core spinning Yes Yes Yes

machine
5 Spindle monitoring machine Yes Yes Yes
6 Roving stop motion Yes Yes No
7 Cop Sorter Yes Yes No
8 Synthetic condenser rubbing aprons Yes Yes Yes
9 Condenser tapes Yes Yes Yes
10 Spindle tapes Yes Yes Yes
11 Combing aprons Yes Yes Yes
12 Conveyer and hopper feed lattices Yes Yes Yes
_______________________________________________________________________________________________

___________________________________________________________________________________________________
13 Wooden/Aluminum lags with pins Yes Yes Yes
14 Rag tearing pins Yes Yes Yes
15 PVC/PU conveyor belts Yes Yes Yes
16 PU round belts and tubes Yes Yes Yes
17 Flexible/Metallic Card Clothing Yes Yes Yes
18 Weaver and warper beams Yes Yes Yes
19 Hydraulic equipments of handling beams Yes Yes No
20 Reed storage racks Yes Yes No
26.3.2 Challenges faced and suggestions by Technical Textile

machines/spares manufacturers of India
Challenges
The Indian machine manufacturers face tough competition from European manufacturers for sophisticated
machinery with high-end quality and from Chinese manufacturers for cost efficient machines.
Lack of technical expertise, lack of technology transfer, lack of product differentiation and diversification, lack
of R&D and acceptance, limited domestic market requirement, high production costs, and lack of awareness of
quality standards are the major challenges faced by machine manufacturers.
More specifically, bottlenecks like imported electronic components, high import tax, high cost of steel and
aluminum, dependence upon Chinese manufacturers and logistics costs make it difficult for some of these
manufacturers to grow.
Suggestions
Since some of the machines are being imported into India from countries with low production costs, provisions
and policies should be made to prevent dumping of technical textile goods at unreasonably low prices.
The government should also come up with special schemes for R&D, technology transfer, and technical
collaboration in technical textiles machinery to encourage and produce innovative technology.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
26.4 Textile Machinery Manufacturers

Association (TMMA) India
TMMA represents the interest of textile machinery manufacturers in India aims to promote the growth of
the Textile Engineering Industry in India through its interventions. It provides various services to its
members aiming to strengthen the competitiveness of the industry and promoting 'Made in India' brand in
the global market.
The Indian textile machinery sector
The Indian TEI is dependent on cost effective machines, critical components and accessories from China,
Korea and Taiwan. About 50% of the machines are imported from China. High quality equipment and
machines are imported from Japan and Europe.
Many leading Indian companies have shown keen interest in seeking opportunities for Joint Ventures,
Technology Transfer and Collaboration for future R&D.
26.4.1 Different types of textile machines which can be produced

in India
Table 26.3: Different types of textile machines which can be produced in India
S. Machine type Import (Rs. Source of import R&D/JV/FDI at present

No. Crores)
1 Weaving loom (Rapier, 2000 Belgium - Picanol Indigenous R&D done and
airjet and waterjet) Italy - Itema seek FDI/JV for airjet and
Japan - Tsudakoma waterjet commercialisation
China - Kingtex
2 Knitting machines (high 1500 Germany - Karl Mayer Indigenous R&D to be done-to
speed circular, WEFT and Korea - Taeho, Raschel be commercialised
Flat knitting) Taiwan - Pai Lung
Japan - Shima Seiki, Fukuhara
China - Birdy
3 Embroidery machines 1100 Germany - Lasser Indigenous R&D to be done-to
(Horizontal and Multi- Switzerland - Saurer be commercialised
heads) Japan - Barudan, Tijima
China - Birdy, KSA
4 Processing machines 1000 Switzerland - Benninger FDI/JV and Indigenous
(Drying, dyeing and China - Fong’s research to be done- to be
bleaching) Germany - Menzel, Bruckner commercialised
Italy - IPC
5 Spinning machine 900 Germany - Saurer FDI is possible for ‘Make in
(Autowinders/Autoconers) Japan - Murata India’
Italy - Savio
_______________________________________________________________________________________________

___________________________________________________________________________________________________
26.4.2 Challenges faced by technical textile machine manufacturers

in India
• Brand perception – India Vs Europe Vs China – Indian products are better than Chinese but are more
expensive. On the other hand, Indian products are comparable in quality to European products but are
cheaper. Buyers prefer to have European quality at Chinese prices from an Indian manufacturer.
• Land & Building Infrastructure – Land acquisition is difficult and ease of doing business in creating
infrastructure is still low in India.
• Competition – There is competition from imported second-hand machines or refurbished machines which
are often sold as brand-new machines. Foreign manufacturers and Indian companies are unable to
survive due to such practices in India.
• Extra incentive for imported machines – Indian Government offers ATUF subsidy on imported machines
and there are infrastructure and fiscal benefits offered by other countries (China, US, Europe) to their
enterprises. It makes it difficult for entrepreneurs to run profitable ventures in India
• Disadvantageous government guidelines – Inverted duty structure, un-pragmatic QCO by Ministry of Steel
on import of High-quality but required in low-volume (steel) by the Indian industry, poses a threat to the
survival of Technical Textile Machine manufacturers.
_______________________________________________________________________________________________

27. Stakeholders’
Workshops
IIT Delhi organised seven stakeholders’ workshops to elicit opinions to enrich the understanding of the
industry and to capture voices of stakeholders. These were conducted online to prevent the spread of Covid
infection. The stakeholder groups for the respective workshops (1-7) were as follows:
1. TRAs, COEs and Academic Institutions
2. Apex Industry Associations and Institutions
3. Business Leaders from Protech Segment
4. Business Leaders from Meditech Segment
5. Business Leaders from Clothtech, Hometech and Sportech Segments
6. Business Leaders from Agrotech, Geotech and Oekotech Segments
7. Business Leaders from Buildtech, Indutech, Mobiltech and Packtech Segments
The opinions and ideas contributed by the stakeholders during the deliberations in these workshops have
been processed and are presented in this section. This effort is meant to improve the understanding of how
the business leaders perceive strengths, weaknesses, opportunities and threats of Indian technical textiles
industry. The content has been organised as per individual workshops and an attempt has been made to
capture key aspects of the industry as they were discussed in the workshops. Common concerns across
segments have also been retained to highlight their significance.
Conclusions from all the workshops are presented in the following sections across four pillars:
1. Resource availability for Technical Textiles
2. Markets and marketing of Technical Textiles
3. Future developments expected in Technical Textiles
4. Impediments to growth of Technical Textiles in India
27.1 Resource availability for Technical Textiles

27.1.1 TRAs, COEs and Academic Institutions
• The Indian manufacturing units use the hand lay-up technique. The use of modern injection moulding
or compression moulding processes is relatively lower as compared to that among units in other
countries with whom India competes in the international markets.
_______________________________________________________________________________________________

Section 27: Stakeholders' workshops
___________________________________________________________________________________________________
• Most of the machines used in technical textiles manufacturing in India are being imported. There is
lack of availability of standards as well as well-equipped laboratories for checking the quality of
machines as well as technical textiles products.
• India’s technical textiles industry is characterised by lack of availability of domestically produced high-
performance fibres (Carbon, Kevlar, UHMWPE, Nylon 66, etc.) and functional fibres (UV protective,
moisture management, antibacterial, etc.).
27.1.2 Apex Industry Associations and Institutions

• Lack of availability of various high-performance fibres is a defining characteristic of India’s technical
textiles industry today.
27.1.3 Protech
• Lack of availability of raw materials and high cost of developing advanced products, are major
challenges to the protective textile industry. Moreover, due to the high cost of the product, the
domestic demand for protective clothing is small.
• The ballistic textile market is highly dependent on imports because the two major fibres – Ultra-high
molecular weight polyethylene (UHMWPE) and aramid fibres – whose requirement is in the ratio of
80:20 and are not manufactured in India.
• There is a severe lack of skilled (soft and technical) engineers with management knowledge. It is
proving to be a major deficiency for the industry. Absence of any specific curriculum for teaching and
training about technical textiles to the students results in high training and onboarding costs for the
industry. This reduces the competitiveness of Indian firms.
• High level of dependence on imported raw materials (e.g. Nylon 6 and Nylon 66) is one of the major
barriers to growth. There is a woeful lack of indigenous manufacturers of high-performance fibres.
27.1.4 Meditech
• Most nonwoven components of Meditech are imported. An example was cited. Some components of a
diaper – top and back sheet, acquisition distribution layer (ADL) and soft nonwovens – are all
imported.
• Major challenges faced by the Indian medical textiles industry as a result of covid pandemic are –
sudden jump in price of hygiene and sanitation products, increased cost on health of employees, 25
percent drop in utilisation of productive assets and drop in manufacturing efficiency due to social
distancing norms, difficulty in restoring manpower availability, higher absenteeism, disruptions in supply
chain due to delay in receipt of input materials, widened supply-demand gap resulting in hike in prices,
difficulties and delays in cargo handling, drop in demand and cancellation of international
orders/tenders, denial of small orders by raw material suppliers which has negatively affected new
business possibilities and uncertainty on Merchandise Exports India Scheme (MEIS) incentives.
• A comparative analysis was presented comparing established and small manufactures. Established
manufactures have the capacity for large production, multiple manufacturing facilities across the globe,
_______________________________________________________________________________________________

___________________________________________________________________________________________________
better control on raw material supplies as well as costs and superior distribution and sales network,
whereas the small manufacturers have better reach in the local market with more flexibility in product
customisation. The larger players highlighted the competition they faced from smaller players who
control 50% of the domestic Meditech market.
• There is a critical shortage of suitably skilled manpower for medical textiles.
• The biggest problem in development of Indian medical textile market is lack of raw materials.
Unavailability of Pilot/Small batch process, weak supply chain management (SCM) and inadequate R&D
for innovative products, high dependence on imported raw materials and machinery are the major
weaknesses of Indian technical textile industry in general and Meditech in particular.
• In the context of high value added Meditech products, the investment required for establishing capital
infrastructure and buying technology is very high for Indian manufacturers.
27.1.5 Clothtech, Hometech and Sportech

• There is a lack of good converters to finished products in Indian textile supply as well as lack of
collaboration between industry and technical institutions for research & development that is required to
address this gap.
• There is a huge gap between R&D laboratories where product development for technical textiles takes
place and the fabric producers.
• The lack of facilities to promote manufacturing of raw materials and inputs has created a disadvantage
for Indian Clothtech manufacturers especially in export markets.
• In Clothtech segment, lack of local machine manufacturing has resulted in high dependence of Indian
Clothtech producers on machines imported from China.
• Because of insufficient consumer demand which discourages local investors and entrepreneurs, many
products of the Sportech segment are not manufactured in India and have to be imported from outside.
• There is lack of raw material manufacturing capacity in the country for Sportech industry.
• The Hometech industry in India is characterised by low levels of commercialisation of new products and
lack of access to advancement in new technology.
• It was highlighted that India is the largest producer of cotton. Farm level traceability (that is required
by markets in developed countries) of Indian grown cotton is not practiced in our textile supply chain.
One more important fact is the lack of branding of cotton fibre (we only have Kasturi Cotton). These
two deficiencies have a huge negative impact on acceptability of Indian Hometech products by
international buyers.
• India fulfils its requirement of speciality fibres through import from China, Japan, USA or EU countries.
Even though India has ample natural fibre resources, it has lagged behind in commercialisation of these
fibres due to processing and manufacturing difficulties.
• There is very little collaboration among industry, academia and researchers towards better utilisation of
advanced technology.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
• Import of machinery from countries such as Taiwan and other European countries leads to large cost
outgo for the industrialists in all the segments covered during the workshop.
• The testing facilities for Clothtech , Hometech and Sportech are inadequate.
27.1.6 Agrotech, Geotech and Oekotech

• The practice of using refurbished machines which many a times are of sub-standard quality is widely
prevalent among the product manufacturers. It often leads to final products being of inferior quality.
• High dependence on imports for technical textile machinery, lack of domestic source of speciality raw
material for specific end application, lack of technical expertise and human resource, lack of focus on
innovation of new products and very little research and development are the main challenges faced by
Indian Geotech industry.
• Lack of local raw material and machine manufacturers is a major challenge for Fishnet industry.
Graduates in engineering and technology often are not keen to work in textile industry due to
prevalence of low salaries and poor work-environment among a large number of firms.
27.1.7 Buildtech, Indutech, Mobiltech and Packtech

• Poor availability of industry ready manpower is one of the foremost challenges faced by Packtech
industry. Appropriate Packtech courses/programmes with industry interface are unavailable in Indian
academia even as there is a critical need for such courses/programmes.
• The Packtech segment offers an estimated 60,000 white and 300,000 blue-collar jobs annually. It is an
export-oriented sector that offers lot of growth opportunities.
• Four very important aspects that need to be expanded on are raw materials, skilled man power,
advanced machinery and sound knowledge in technology for better growth of the segments.
• Technology and machines for manufacturing of most Indutech products continue to be imported in
large numbers into the country causing a big capital outflow for firms in the segment.
• Shortage of raw material, lack of testing facilities, lack of development of more sustainable and green
products and need for more technological up-gradation and research are major issues to be tackled for
better growth of Indutech segment.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
27.2 Markets and Marketing of Technical

Textiles
Almost all the participants of the workshop asserted that a vibrant domestic market for technical textiles is a
necessity for the growth of Indian technical textiles industry. In the absence of regular data gathering from
the Indian technical textiles market through market tracking and market research exercise, the assessment
made by different experts and stakeholders (most notably business leaders) about domestic market for
technical textiles can often act as an important component of the situation analysis of technical textiles in
India. It needs to be formalised so that regular and updated estimates of market size are made available to
entrepreneurs and investor community. One of the important trends that has emerged in recent years is the
increased emphasis on recycling and on reducing the use of plastics. It is likely to emerge as one of the major
drivers for increased use of technical textiles in coming years. Some of the key observations that were shared
during the workshop are detailed below:

• New applications of jute hold a lot of promise. The use of jute geotextiles for slope stabilisation, rural
road construction, riverbank protection and railway track construction is being tried out. The use of jute
agrotextiles for sapling bags, grass mat and wrapping fabric has also been demonstrated.
• Lightweight composites for aerospace applications, masks, water filtration cartridges, geotextiles for
road construction, breathable and antibacterial fabrics, etc. are some of the emerging products that will
be dominating the market in future.
• Domestic fibre manufacturing companies do not venture easily into manufacture of high-performance
and functional fibre because of their feeling that manufacturing these is less rewarding but this is due
to their focus on Indian market and unexplored export markets.
• There is lack of awareness among consumers about the use and utility of various technical textiles
products.

• Indian technical textiles market is expected to grow at a CAGR of 12.20% between 2018 and 2023 and
is expected to reach to US$ 32 billion in FY 2023.
• Robust manufacturing infrastructure, abundant workforce at competitive wages, self-sufficient textile

value chain and encouraging policy environment and Government support are the strengths of the
Indian technical textiles industry.
• India has become the 2nd largest manufacturer of PPE in the world after the COVID-19 outbreak.
• Key enablers of growth of Indian technical textile market are demand creation, quality assurance,
innovation and R & D and integration of supply chains.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
27.2.3 Protech
• Domestic sales are just about 20-30% of total sales for all major Indian Protech players.
• Primary use of PVC coated fabrics is in protective clothing and in automotive industries.
• A major challenge as reported by the participating entrepreneurs from Protech industrial units in
organised sector is the tough competition from a widely proliferating players in the unorganised
sector. This not only influences but causes distortion in the costs and prices of the products.
27.2.4 Meditech
• According to the participants of the workshop, the Indian Meditech market is growing at a compound
annual growth rate (CAGR) of 9% and is likely to reach Rs. 7,500 Crores by 2022.
• According to the estimates by the participants, the CAGR for domestic market of baby diaper, fem care
and adult care category are 20%, 15% and 20% respectively. Estimates furnished for the global market
of PP nonwoven peg a CAGR of 7% for hygiene products.
• Main drivers for growth in Meditech market in India are as follows:

o Large and regular addition to the population that is aware and willing to consume Meditech
products
o Technological advancements and easy adoption of such advancements by stakeholders
o Rise of health consciousness and increased awareness of personal hygiene among common
people
o Easy availability of low-cost manpower
o Existence of complete textile value chain
o Emergence of India as a popular and credible destination for medical tourism among patients
from countries in south and western Asia
o Government initiatives, subsidies and incentives as part of ‘Atmanirbhar Bharat’ (Self- reliant
India)
o Existence of infrastructure of COEs/incubation centres
o Existence of regulated technology parks
o Growing popularity of medical insurance leading to higher propensity to avail medical treatment
• Rapid rise in demand is leading to significant innovation in this segment.
• The outbreak of COVID pandemic has created an unexpected and unprecedented rise in demand of
masks, PPE kits and other products in this segment. Many self-funded manufacturers in the Meditech
industry (over 150 of them are BIS certified) rose to the challenge of the pandemic and commenced
production of raw material and masks indigenously.
_______________________________________________________________________________________________

___________________________________________________________________________________________________

• According to the participants, sewing threads dominate the Clothtech segment with 60 percent of the
market share. It is followed by cloth labels which have a market share of 18 percent. Sewing velcro, zip
fasteners, elastics and shoelaces are products in this segment which have high growth potential.
• Only about 5 percent of the total production under Clothtech is exported, mainly to Bangladesh and
Sri Lanka.
• Most of the demand for Clothtech products is satisfied by domestic production but there are certain
Clothtech products which are imported e.g. taffeta fabric used for umbrella, interlining, elastic, and
velcro.
• Government intervention in standardisation, regulation, and generating awareness for promoting the
use of technical textile products will create a necessary market pull for this industry.
• Circular economy i.e., recycling technology and the drive for sustainability is also going to provide a
significant market opportunity.
• Sewing threads, shoelaces, interlinings, zip fasteners, textile labels, hook and loop fasteners (Velcro),
elastic narrow fabrics, and umbrella cloth are products where major opportunities exist for Indian
entrepreneurs.
• In the home textile segment, consumer preference has continued to shift from fashion and luxury to
health and hygiene. Demand for sustainable products has been going up.

• According to the participants, Agrotech market is expected to reach over US$ 14,363.2 Million by 2025
growing at a CAGR of 5.5% between 2017 and 2025, indicating a growing need for agro-textiles in
India.
• Central government has launched the scheme “Promoting usages of agro-textiles in Northeastern
region” to popularise Agrotech products in the North-East of the country and to improve the yields of
agricultural, horticultural, floricultural produce by the use of appropriate agro-textiles like shade nets,
ground cover, crop cover, etc.
• Geotextile industry in India is in its nascent stage and is attempting to rapidly catch up with the
economically developed countries. Exports have grown at a rapid pace, almost at a CAGR of 30% over
the last 5 years, reaching Rs. 1,000+ Crores annually.

• The Indian Indutech market has evolved from recycled polyester fibres to PP spunbonded fabric to PVC
coated textiles.
• Estimated automotive fabric consumption in India is approx. 28 million sq. meters. The estimated
domestic market size of high-performance seating fabric including passenger vehicles, commercial
vehicles, railways and airlines is estimated at Rs. 1,100 Crores per annum.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
• India is dominating the Packtech segment with a global market share of 40-45%. There are 34 Indian
companies whose aggregate annual exports is about US$ 1 billion.
• Use of better packing material to prevent wastage of food grains is catching on. There is a success
story for use of insect repellent packing which has led to the reduction of wastage of food grains from
8% to 2.2% in Punjab mandi.
• There is a success story in Buildtech segment in the form of ‘flex’. Initially, flex was imported from
China and Korea but gradually India has become a net exporter of flex.
27.3 Future developments expected in Technical

Textiles
• ATIRA is working with ISRO for making lightweight composites for aerospace applications.
• SASMIRA’s activities in the domain of agricultural textiles and support to NER project sponsored by the
Textile Ministry can be taken as model project for the development of technical textile products.
• There is a need for development of biodegradable raw materials from agro wastes for poor farmers who
are often unable to afford woven and knitted HDPE shade net and green house.
• In order to make fibre development economical and sustainable, there is a need to focus on domestic
as well as industrial market.
• Development of standards for some technical textiles segments such as agrotextiles need immediate
attention.
• Lightweight composites for aerospace applications, masks, water filtration cartridges, geotextiles for
road construction, breathable and antibacterial fabrics, were highlighted as some of the emerging
products.
_______________________________________________________________________________________________

___________________________________________________________________________________________________

• Public procurement by railways, defence forces, Govt. hospitals, etc. will continue to play an important
role in demand creation in technical textile market.
• Sportech, Buildtech, Protech and Geotech are segments with high potential for India.
• Composites for bunkers in railway coaches, protective clothing for defence forces and firefighters, use
of geotextiles for bullet train project, moisture management fabric for sportswear application, etc. are
all innovative products and applications in technical textiles that are being deployed.
27.3.3 Protech
• Emerging technologies in Protech segment are as follows:
o Seamless garmenting o Biochemical finish

o Additive manufacturing o Graphene
o Threat detection technologies o Printable conductive coatings
o Radiation barrier fabrics o Phase change materials
o IR protective nets o Nanofibers
o Polyurethane coated fabrics o Conductive inks
o Filtration media for virus and bacteria o Aluminium coated fabric panels and
o Air/water filtration nano-membranes o Hybrid fabrics used for protective
o Artificially intelligent fabrics applications (gloves, helmet, bulletproof
jacket, etc.)
o Health monitoring and control sensors
• Opportunities for Indian protective textile manufacturers exist in various applications in space, sports,
civil, and defence industries.
27.3.4 Meditech
• The emerging technologies in Meditech segment are as follows:
o Spunbond nonwovens o Sanitary pads o Sustainable, eco-

o Face masks o Nanocore friendly, and
biodegradable medical
o Caps o Filters employing
textile products
o Aprons nonwovens
o Diapers (adult and o Composites with

baby) nonwoven
_______________________________________________________________________________________________

• The emerging technologies in Hometech segment are as follows:
o Fabrics for o 100% recyclable carpet o Jute for tufting carpets

soundproofing (room backing cloth and fabric tiles
and building acoustic) o Waterproof and thermal o Luxury tiles
o Nonwoven products for insulator nonwovens
window blinds o Carpet tiles
• Sports textiles is a great opportunity for India. The emerging technologies in Sportech segment are as
follows:
o Sports towels o Smart Textiles o Coated textile fabrics
o Specialty nonwoven for o 3D printing segments which have high export
sports shoes potential
o Hydro cotton
o Artificial grass

• Nonwoven technology appears to be gaining traction among Agrotech products.
• The emerging products in Agrotech segment are as follows:
o Crop covers o TFO twister and o Anti-Hail nets

o Shade nets (especially multifilament based o Crop protection nets
low GSM shade nets) knotless fishnet
o Bird nets
(international market)
o Anti-insect nets o Fog catcher nets
o Scaffolding nets
o Fish nets o Woven sacks & fabric
• The major use of geotextiles is in landfills, mining and erosion and landslide control. Emerging
geosynthetic products in Geotech are as follows:
o Geo-grid o Geostrap o Geonet
_______________________________________________________________________________________________

___________________________________________________________________________________________________
o Geomembrane o Glass fibre composite o Geotextile wall planters

o Geocells based Geotech products for vertical gardens
o Nonwoven geotextiles o Geotextile underlay for o Pond liners

paver blocks
o Carpet tiles for
geotextile application
• There is a lot of business interest in the Oekotech segment but it still is in the nascent stage.

• Emerging products and technologies in Indutech are as follows:
o Nanofibre membranes o Conveyor belts and o Webbings

o Lamination and coating hoses o Carbon fibre-based
technologies o Ropes composites
o Filtration technologies o Slings
• Emerging products and technologies in Mobiltech are as follows:
o Tyre cords o Airbags o Woven fabric is being

o Roof linings o Knitted fabric for seating replaced with knitted
fabric
o Filtration cloth o PVC coated textiles for
seating o PVC coated textile
o Seat covers
o Seat belts o Nonwovens
• Trends in Mobiltech suggests growing use of:

o More compostable, degradable, biodegradable, and recyclable polymers.
o Products with single polymers becoming more popular as they render it more recyclable.
o Flex-based food storage products with antibacterial activity.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
27.4 Impediments to growth for Technical

Textiles in India
• Lack of availability of high-performance fibres (Carbon, Kevlar, UHMWPE, Nylon 66 etc.) and functional
fibres (UV protective, moisture management, antibacterial etc.) from the domestic suppliers is
hampering the self-reliance and growth of the technical textile industry.
• As technical textiles require specialised knowledge, lack of qualified and skilled manpower is one of the
major impediments. A multidisciplinary team is needed by the industry and TRAs. However, for the
small-scale technical textile units under MSME and even for TRAs, it is quite challenging to recruit and
retain such qualified manpower.
• Most of the Indian industries use hand layup (38%) technique whereas the use of injection moulding or
compression moulding is relatively less. This is a major inhibitor in the growth of Technical Textiles.
• There are a very limited number of big players and most of the manufacturers come under the ambit of
MSME or SMEs. This limits the pace of growth of the industry as a whole.
• Inferior quality of raw materials such as raw jute, absence of quality mark like wool mark, use of
primitive machines and high labour requirement are some of the major hindrances.
• Lack of updated standards is a major obstacle.
• There is lack of awareness among consumers about the utility of various technical textiles products.
• Use of manual labour and lack of use of modern machines are important reasons behind poor quality
and less competitive technical textiles products.

• Lack of raw material, lack of indigenous R&D, imported machinery, lack of awareness of using technical
textile products, limited skilled workforce and lack of standardisation and regulations for technical
textiles were flagged as major impediments for growth of Indian technical textile industry.
27.4.3 Protech
• There appears to be a general lack of awareness among common people about safe practices and
safety equipment.
• There is a lack of adequate legislation for mandatory usage of protective clothing in industries.
• There is a gross absence of stringent , research-based standards and regulation for in the Indian
protective textile industry.
• Lack of quality benchmarking for the development and export of technical textile products is a major
impediment for India’s Protech products.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
27.4.4 Meditech
• Major threat to formal players emanates from numerous unorganized players who manufacture
Meditech products in poor hygiene condition, with very low-quality and absence of adherence to
standards. Fast and speedy implementation of new Medical Device Rule (MDR) of 2017 which describes
removing medical devices from drugs and cosmetic act is needed. Standardization of medical textile
products is crucial to stop the mushrooming of unorganised players with low standard products.
Fluctuating cotton prices, pollution issues in processing, bioburden in cotton fibre, low sterilization
capacity etc. are threats to the medical textile industry.
• Lack of adequate standards for products and low awareness of end application of medical textiles is a
major hurdle to the growth of this segment.
• At present, the import duty on raw material and finished diapers is the same which has consequently
led to import of inferior quality products in Indian medical textile market.
• Lack of testing facilities of Meditech products has led to the domination of inferior quality products in
the market.
• Excessive reliance on imports is a key impediment in development of the medical textile industry.
• Availability of skilled manpower for medical textiles is another hindrance against the growth of this
sector.

• Inverted duty structure is prevalent in the textile supply chain and has a negative influence on the cost
of products that ultimately reduces their consumption.
• Lack of good converters of technical textile finished products in Indian textile supply chain impacts
Clothtech negatively.
• Absence of product standards, less availability of garmenting facilities in India and multiple GST
structures for textile products are key impediments for Clothtech segment.
• Lack of adequate and updated BIS standards and certified laboratories serve as major impediments in
the growth of Clothtech and Hometech.
_______________________________________________________________________________________________

___________________________________________________________________________________________________

• Limited consumption of Agrotech products in the agriculture sector is the biggest challenge in India.
The Agrotech segment is dominated by SME players and the segment has a relatively small share in
Indian technical textiles when compared to its potential. Lack of big players, less acceptance of
advanced technology and low cost of conversion, lack of standardisation of Agrotech products are
among the major limitations to the growth of this segment in India.
• Major gaps for Geotech and Oekotech segments are low consumer confidence, absence of standards
and usage guidelines, and resistance to adoption by the end users. A major reason cited for low user
confidence is the bad experience of users due to poor quality of Geosynthetics often being used for
construction by project contractors.
• Another hurdle to end user adoption of Geotech and Oekotech products is that of getting approvals for
usage of products or change of designs or change of scope, financial approvals in Engineering,
Procurement and Construction (EPC) contracts, provision in Schedule of Rates (SORs) / Demand signal
repository (DSRs) for tendering purposes.
• Lack of a centralised system for product certification and quality assurance is a major technological gap
for Geotech and Oekotech. Lack of standards and codes of Geotech and Agrotech products leads to less
end user adaptation of these products.
• Lack of awareness among the approving authorities for Geosynthetics uses in infrastructure was spoken
of as another major impediment.
• Lack of integration between a product designer, geotechnical expert, and structural engineer to frame
an appropriate specification of a geotextile product is a key hindrance in development of Geotech and
Oekotech segments.
• In many countries, geotextiles sells as a product with proper specifications. In India however, it is sold
as a solution for civil construction. It becomes difficult for textile manufacturers to convince inter-
departmental authorities to adopt geotextiles as Government procedures in India do not easily permit
such multiple authorities to take decisions.
• Geosynthetics is at a nascent stage in India. Indian users are largely unaware of the benefits of utilising
Geotextiles as a better alternative to other material for some applications. Lack of awareness regarding
the use such products is a major impediment to the growth of Geotech and Oekotech.
• Guidelines of the ATUFs scheme are very stringent and not clear to new entrepreneurs.
• Long user trial periods specified for Geotech products are very time consuming and discourage
innovators and engineers from contributing more to the advancement of these segments.

• A major challenge for Indian manufacturers is to produce consistent quality Buildtech and Indutech
products according to defined standards.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
• The time required for product development in case of highly developed products in Mobiltech segment
is at least four to five years. Such long gestation period requires long-term investment for which
support from an agency like the government is necessary.
• Lack of international level testing facility (Branded international facility) is one of the hurdles to the
development of Mobiltech segment.
• Lack of reliability of vendors who are outsourcing partners in the Indian Mobiltech segment is a major
concern for Mobiltech product manufacturers.
27.5 Factors Affecting Technical Textiles

Industry: Expert Opinion
27.5.1 Introduction to factor analysis of responses from workshop
participants
The factors that impact the growth and development of technical textile industry in India need to be
highlighted based on the opinion of experts from the industry. This is important because the business leaders
which include entrepreneurs operating in the industry have a practical exposure and experience in their
respective segment. With this perspective in mind, the study team has captured and documented the views of
industry experts who are important stakeholders of technical textile industry in India. Their views regarding
enablers and impediments to growth were sought by administering a questionnaire to them.
27.5.2 Methodology of factor analysis of responses

A questionnaire was developed which consisted of questions about various aspects of technical textiles
industry that contribute towards its promotion and inhibition. An exhaustive list of factors was collated and
questions were specifically formulated around them. The questionnaire contained questions grouped in three
broad areas. All the questions were designed with the use of 5 point Likert scale where 1 meant “Strongly
Disagree” and 5 meant “Strongly Agree”. The responses of 33 industry experts to the questionnaire were
obtained prior to their participation in stakeholders’ workshops. Factor Analysis was used to draw relevant
inferences and conclusions from the collected data.
Factor Analysis is a statistical technique which is used to reduce a large number of variables into a fewer
number of factors using variability and correlation among the variables (Child, 1990; Shrestha, 2021)*. A factor
score is generated from factor analysis and it is then used to obtain a fewer number of unobserved variables.
______________________
*Child, D. (1990). The essentials of factor analysis. Cassell Educational.
Shrestha, N. (2021). Factor analysis as a tool for survey analysis. American Journal of Applied Mathematics and Statistics, 9(1), 4-11.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
27.5.3 Results of factor analysis of responses

The following paragraphs present the findings of the factor analysis:
Factors affecting growth of technical textiles industry in India
The first group of question attempted to analyse the factors affecting the growth of technical textile industry
in India. The results based on the responses received from 33 industry experts are presented in Figure 27.1.
Figure 27.1: Factors affecting the growth of technical textile industry in India
Production
Barriers
Inadequacies
Industry
Inadequacies
Business
Inadequacies
Factors affecting
Growth in Technical
Textiles Industry
Prerequisites
(Input Enablers)
Financial Support
Enablers
(Growth Enablers)
Demand Enablers
(Output Enablers)
According to the industry experts, the various factors that act as a barrier to the growth of the industry can be
classified under the heads of production, industry and business inadequacies. Similarly, the various enablers to
growth can be classified under heads which are prerequisites, growth enablers and finance related.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Barriers to growth
The specific barriers under each of the heads are presented in Figure 27.2.
Figure 27.2: Barriers to growth
Production Inadequacies Industry Inadequacies Business Inadequacies
• Non-availability of raw materials • Inadequate product testing • Inadequate business interest

facilities among the large companies in
• Non-availability of technical
India in the technical textiles
competence to lead product • Inadequate adherence to
and process innovation quality standards • Inadequate indigenous research
and innovation in the country
• High cost of developing new or • Inadequate domestic
improved products or processes cooperation with: other firms, • Inadequate organisational
experts in universities, experts culture for innovation
• Manufacturers lack economies
in government laboratories,
of scale in production • Inadequate interest among
professional technical support
entrepreneurs in India in the
service, and research
technical textile sector
associations
• Lack of marketing capability for
new products
• Lack of consumers’ acceptance

of new products
Enablers of growth
The specific enablers under each of the heads are presented in Figure 27.3.
Figure 27.3: Enablers of growth
Prerequisites Financial Support Demand Enablers

(Input Enablers) (Growth Enablers) (Output Enablers)
• More number of graduates • Availability of Seed (start-up) • Low fiscal duties

passing out from Institutes with funds
• More stability in exchange rates
adequate knowledge related to
• Easy access to long-term
technical textiles • Boost international demand
financing for start-ups
(exports)
• Adoption of rapidly changing
• Financing for expansion of
technologies • Magnify domestic demand
companies (non-start-up)
• Marketing and Business
Development
• Better supply chain

management, linking-up with
global value chains
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Factors responsible for technological gaps in Indian technical textile industry
Development of technical textile industry is being driven by rapid advancements in technology and
introduction of innovation. In order to stimulate growth in the future, it is imperative to understand the factors
that are responsible for technological gaps that are holding back Indian technical textile industry. Analysis of
the responses received from the experts revealed that the following market deficiencies and barriers to
innovations contribute to the technological gaps.
Figure 27.4: Factors responsible for technological gaps in technical textile industry in India
Market deficiencies
• A market dominated by established companies

• Lack of long-term business strategy
• Lack of information on technology
• Lack of internal absorptive capacity
• Inadequate market size
• High investments for setting up new technology plants
Barriers to innovation
• Lack of availability of funds

• Very high direct innovation costs
• Lack of manpower with innovation capabilities
• Lack of focus on innovation by the majority of the companies
• Lack of credibility and trust in the indigenous innovation
Impediments to adoption of advanced technology in technical textiles
Diving deeper into understanding the low adoption of advanced technologies in the context of technical
textiles, the experts opined and indicated the following organisational barriers and process barriers to
adoption of advanced technology:
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Figure 27.5: Impediments to adoption of advanced technologies in Indian technical textile industry
The above findings clearly indicate that there is a need for creating an environment that caters to the
challenges and impediments faced by entrepreneurs on aspects related to production, process, market, and
organisational aspects so that the industry can have an accelerated pace of growth.
27.6 Suggestions proposed by participants of

the workshops
• For all segments: Government should allow subsidy on refurbished branded machines which will
reduce the investment of initial heavy capital for industrialists. India should also start manufacturing
technical textile machinery. In addition to reducing the initial cost of purchase, this will also reduce the
cost of maintaining and servicing the machines.
27.6.1 Suggestions by TRAs, COEs and Academic Institutions

• SASMIRA’s support to NER project can be considered as model project for the development of technical
textile products.
• Sports Authority of India must adopt clear cut standards for quality checking to give a boost to Sportech
segment.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
• There should be more focus on techno-commercial research projects and industry linked projects by
academic institutes.
• Fibre development requires acquiring or developing technology that requires huge capital investment
and is a long term (10-15 years) initiative. It should be supported by the government.
• Focus of Indian players should be on domestic as well as international markets.
• Inter-ministerial cooperation among various ministries is required to promote the use of technical
textiles.
• Creating a market development team for technical textiles based in Ministry of Textiles, can help in
enhancing consumer awareness through trade fairs and other awareness events.
• There should be focus on techno-commercial research projects and industry linked projects by the
academic institutions for the progress of technical textiles industry.
27.6.2 Suggestions by Apex Industry Associations and Institutions

• Government must enhance its push for the usage of technical textiles by various schemes such as Jal
Jivan Mission, Swachh Bharat Mission, Khelo India, Ayushman Bharat to increase the demand.
• Digital facilitation of licensing, single window clearances and fast track approvals and regulation
processes should be increased so that it can be helpful for the industry.
• Government should establish skill universities in different regions of India to produce trained manpower
to help upgrade the sector.
• Mandatory usage of technical textile products in certain areas, ensuring availability of functional raw
materials, awareness about technical textile products and notification of more HSN codes, should be
implemented to help increase the demand in this industry.
• In order to promote foreign investment into this industry, easy transport, better-equipped port and
smooth transits are the key factors in giving boost to the technical textiles business.
27.6.3 Suggestions by representatives of Protech segment

• Government should provide encouragement and funding to start-up innovators. Industry collaboration
with academic institutes involved with technical textiles training and education must be fostered.
• Adaptation of global standards as per Indian environment must be done at the earliest.
• Government should mandate the use of protective textiles by institutional consumers (road transport
and highways, rail, hospitals, construction, etc.) and prepare a comprehensive national database of
suppliers of technical textiles.
• Government must strengthen the regulations pertaining to industrial safety to give a boost to the
demand for protective textile products.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
• Collaboration of Indian companies with global leaders in production of high-performance fibres should
be encouraged for ensuring reliability of supply and for promoting domestic manufactures.
• The Government must support and encourage IITs and other technical institutes to include specialised
academic programmes on technical textiles.
• Manufacturing of high-performance fibres needs long term planning and huge investments with a
robust R&D infrastructure. Government of India must offer funds for fundamental materials research.
27.6.4 Suggestions by representatives of Meditech segment

• There should not be any import duty on raw materials and machines for the growth of domestic and
export markets of medical textiles.
• Government should facilitate easy and effective interactions between Multinational Corporations and
Indian entrepreneurs who are involved with the technical textiles industry.
• Government must issue formal notifications for mandatory and appropriate use of Meditech products.
• Global level standardisation of Meditech products should be taken up by the Government and industry.
• Government should consider creating and then leasing out manufacturing facilities to new
entrepreneurs as part of its efforts to improve infrastructure for the Indian technical textile industry.
• Proper disposal mechanisms are extremely crucial in case of medical textiles. Use of biodegradable eco-
friendly polymers and fibres in medical textile products should be encouraged.
• Protection of IPR policy is a major concern for research and development teams in the field of medical
textiles. Protection of product patents will lead to improvement in quality of products in the market.
• ISI mark should be made mandatory for all the products procured against government tenders as this
will bring in good quality of products in the market.
• Involvement of the government is required in setting up good facilities and infrastructure for leasing to
entrepreneurs. Such an initiative will ultimately compel the manufacturers (especially MSME) to follow
good manufacturing practises (GMP) and improve the overall competitiveness of the industry.
27.6.5 Suggestions by representatives of Clothtech, Hometech and

Sportech segments
• Government must provide encouragement to Indian companies to invest in R&D to introduce new
products and technologies in the market.
• The Government of India should expand the testing facilities for various technical textile products.
• Multiple GSTs is an area of acute concern for industrialists in technical textiles industry. The
government should propose single GST to promote transparency and efficiency in the system.
• Supportive measures should be introduced to enhance the contribution of Centres of Excellence to

advancement of technology in technical textiles.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
• A common centralised database should be established from where any stakeholder can access data on
various innovations in technical textiles.
• The government should alter the inverted duty structure in the textile supply chain as a path-breaking
move for the development of technical textile industry.
• R&D must work hand in hand with the marketing department to develop new products and find new
markets to increase the size of the market.
27.6.6 Suggestions by representatives of Agrotech, Geotech and

Oekotech segments
• Government must establish a common platform for accessing information regarding Geotextile products
across all projects in the country so as to improve standardisation of procured products.
• Government should provide subsidies on procurement of good quality refurbished branded machines to
reduce the burden of initial heavy capital outflow for manufacturers.
• One of the biggest gaps in India is the lack of alignment among product designers, geotechnical
experts, and structural engineers in suggesting appropriate specifications for geotextile products. This
should be remedied by the Government setting up institutional mechanisms.
• A very important ground level problem in Geotech and Agrotech is the lack of user trials for new
products. Due to longer trial periods, follow up is generally poor and most of the effort is in vain. It is
suggested that regional trials with joint research ventures by manufacturers and regional authorities
can be a worthwhile idea to pursue.
• India must consider adopting some of the best practices of Government-industry partnerships from
across the world. For example, The Every Day Counts (EDC) scheme of the US Department of
Transportation where the department adopts existing and new technologies and accelerates their usage
in public projects.
• Collaboration between Government and research agencies should be fostered to deliver efficient
product trials.
• Establish a quality assurance programme where an independent body should audit manufacturing
practices, quality control processes, raw materials used, and issue approvals. In this context, the
_______________________________________________________________________________________________

___________________________________________________________________________________________________
National Transportation Product Evaluation Program (NTPEP) practiced by USA and British Board of
Agreement practices in the UK are important models to study and adopt.
• A major hurdle on end user adoption in Geotech and Oekotech is of getting approvals of higher
authorities for usage of products or change of designs or scope, financial approvals in engineering,
procurement and construction (EPC) contracts, provision in Schedule of Rates (SORs) / Demand signal
repository (DSRs) for tendering purposes. Circulars and instructions from ministries must be issued to
mention such guidelines which can permit field engineers to be flexible and change tenders and design
processes under certain specific conditions.
• Mandatory usage of geosynthetics should be

encouraged to provide savings in natural
resources, improve construction time and
quality and save costs. In this context an
example was given of Pradhan Mantri Gram
Sadak Yojana (PMGSY) in India where in
15% (or as decided by ministry) of area has
to be constructed by mandatory usage of
geosynthetics. Coir Geotextiles roads in rural areas under PMGSY-III
(Representational purpose only)
• In the Geotech and Oekotech segment, recommendation was made about strengthening and
empowering CoEs or IITs to act as an authority to vet the design changes or change of scope in
projects and to guide the project staff in implementing the same.
• Help must be taken by Government of India from agencies like Conformitè Europëenne (CE), British
Board of Agrément (BBA), and National Transportation Product Evaluation Program (NTPEP) to improve
product and system certification for Geotech and Oekotech.
• In the textile industry inverted GST duty structure is present where all the raw materials have a GST
value of 18% whereas the end-product retains 5-12% GST. This increases working capital requirement
for the manufacturer. A common input and output GST model must be implemented as it might prove
to be more useful for the growth of this industry.
• The submission of report of the Technical Advisory and Monitoring Committee (TMAC) set up by the
Ministry of Textiles to establish BIS standards for Agrotech products should be expedited to overcome
lack of standards acting as an impediment.
• Government of India should take necessary steps to alter the product specification in various public
departments so as to facilitate the use of Geotech and Oekotech solutions.
• Government should establish product certification and application-based testing institute with advanced
research amenities for Geotech and Oekotech.
• Ministry of Textiles, Government of India should launch a vigorous awareness campaign for Indian
users to familiarise them with the benefits of using Geotech and Oekotech solutions.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
27.6.7 Suggestions by representatives of Buildtech, Indutech,

Mobiltech and Packtech segments
• BIS should come out with a revision of Indian standards every three years as these need to be
continuously aligned with international standards.
• Government should facilitate setting up of testing laboratories of global standards so that these can
help speed up the product development process.
• Existing skill development centers should also be equipped for latest technology needed for the
technical textiles industry.
• Joint ventures with companies of developed countries should be promoted as those will prompt more
investment in the market.
• Technology upgradation is a major concern in this industry. In this context, R&D support from institutes
and COEs to the industry should be encouraged as these will strengthen innovative solutions for
efficient processes and quality products at economic prices.
• Universities and Institutions should be supported to add technical textile courses and programmes in
their curriculum.
_______________________________________________________________________________________________

28. Emerging Technologies
and Technology Trends in
Technical Textiles
Technical textiles are evolving at a rapid pace due to research and development efforts in both material and
production technologies. Developments that have happened in other areas such as nanotechnology,
biotechnology, material science, electronics and information technology have facilitated innovations by
technical textiles companies that are continuously developing products to meet challenging functional
requirements. This trend of developing new technologies and products is likely to continue as new areas for
application of technical textiles keep getting discovered. The developments related to the emerging
technologies in the context of technical textiles and highlights about some material and technology in selected
segments of technical textiles are documented in this section.
28.1 Emerging Technologies in Technical Textiles

The emerging technologies in technical textiles related to smart textiles, nonwovens and textile preforms for
composites have been documented in the section below.
28.1.1 Smart textiles

In the recent times, certain textile products have come to have an active component embedded in them,
enabling them to sense the stimuli that are present in the ambient environment and follow it by reaction and
response in the corresponding textile structure. The stimuli and reaction to stimuli can be electrical, thermal,
magnetic, or of some other origin. Such ‘Smart Textiles’ with active components are becoming increasingly
popular with service and functionality ecosystem that is outside the traditional value chain of textiles. This
area of smart textiles opens up a vast opportunity for textile developers to innovate and develop new
products, each with special intelligence and response. Textiles can be used as sensors, actuators, signal
processors, energy harvesters and energy storage devices. It is expected that a lot of innovative research will
happen in this domain in the near future. Smart textiles are divided into three subcategories [1]:
i. Passive smart textiles can only sense the environment; they are sensors.
ii. Active smart textiles can sense the stimuli from the environment and react to them; besides the
sensor function, they also have an actuator function.
iii. Very smart textiles take a step further, having the gift to adapt their behaviour to the circumstances.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
28.1.2 Phase change textile materials

Phase Change Materials is a collective term for materials with the capacity to alter their aggregate state within
a certain temperature range: from solid to liquid or from liquid to solid. Water is an example. It turns into ice
at 0°C and evaporates at 100°C. These phase change materials are encapsulated by microencapsulation
which is followed by their application on textiles. For example, Schoeller®-PCM™ creates an individual comfort
climate (Figure 28.1). Even if there are extreme temperature fluctuations, it prevents body from experiencing
extremes of temperature helping to retain body’s performance capacity [2] .
Figure 28.1 (a) Mechanism of cooling and heating by phase change material and (b) fabric coated with
Schoeller®-PCM™
28.1.3 Smart textiles with sensors

Textile based sensors provide an interface between user and an electronic system by converting physiological
or environmental signals into electrical signals. Wearable tech garments are capable of monitoring variables
such as strain, pressure, temperature, displacement, humidity, etc. Adidas has developed a sports bra for
sensing heart rate. This bra contains a conductive fibre which has eliminated the need for separate chest
monitoring sensor. This bra also has transmitter, and the data can be seen on the mobile phone and is shown
in Figure 28.2 (a) [3]. Another important application of textile sensors is in the medical field. Xenoma has
developed a lounge suit that detects motion and alerts medical personnel. It is shown in Figure 28.2 (b) [4].
LEAP technologies have developed smart yoga pants that contain shape memory polymer and carbon which
detects incorrect movements and protects the athlete from any muscle tear, injury and inflammation when
working out. It is shown in Figure 28.2 (c) [5]. Nike Adapt Basket Ball shoes contain textile-based sensors
which can sense the tension needed by the foot and adjusts the fit of the shoe accordingly to keep the foot
snug (Figure 28.2 (d)) [6].
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Figure 28.2 Textile sensors based (a) Smart sports bra (b) Sleep lounge suit (c) Yoga pants and (d) Basketball shoes
(a) (b) (c) (d)
28.1.4 Smart mask

XUPERMASK technology is developed by Honeywell and this smart mask contains dual 3-speed fans and HEPA
filters for enhanced breathability. Alongside its integrated features, XUPERMASK boasts active noise cancelling
audio and microphone capabilities, Bluetooth® 5.0 connectivity, LED day glow lights, a magnetic earbud
docking system. Figure 28.3 shows the XUPERMASK technology [7].
Figure 28.3 XUPERMASK Technology
28.1.5 Textile with controlled drug release

The use of textile materials as a drug carrier for biomedical applications has been widely researched. Different
forms of textiles, viz. woven and nonwoven, have been used for this purpose due to their physical and
structural properties [8, 9]. The textile material can be loaded with pain killers, mosquito repellent, antiseptic
etc. Some commercially available products with controlled drug release are shown in Figure 28.4.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Figure 28.4 Different textile fabrics loaded with (a) pain killer (b) insect repellent and (c) silver for better wound healing
(a) (b) (c)
28.2 Technological trends in energy harvesting

smart-textiles
Smart and wearable textiles can replace batteries with energy harvesting devices. These can harvest energy
from external sources, such as the sun, using fibre-shaped solar cells. Alternatively, excess energy from the
immediate environment can be utilised, e.g., in the form of body motion by exploiting the triboelectric or
piezoelectric effect. The term “Piezoelectric” means ability of material to produce electric charge in response
to applied mechanical stress. On the other hand, triboelectric nanogenerators (TENG) can produce electric
charge in response to movement in our surroundings (like human motion, machine vibration, and wind energy
[10–12].
28.2.1 Triboelectric nanogenerators

Triboelectric materials include most textile polymers and materials, which facilitate the production and
application of textile-based triboelectric nanogenerators (T-TENG). Nylon, silk, polyethylene terephthalate,
polyurethane, polylactic acid etc. are used as the contact surface of TENG. Metals or metal particles (Gold,
Silver, Copper etc.) are often used as positive electrode materials for triboelectric effect. Materials such as
polyvinylidene fluoride, PTFE, polydimethylsiloxane, and silicone rubber are also usually covered on fibres or
fabrics to enhance the output of textile based nanogenerators [13]. Figure 28.5 shows the potential
applications of T-TENG.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Figure 28.5 Self-powered microsystems based on textile-based triboelectric nanogenerators
28.2.2 Piezoelectric textiles for energy harvesting

Wearable textiles based on piezoelectric nanogenerator (T-PENG) can be used extensively in electronic
devices. To make this approach successful, they need to harvest a large amount of energy. Textile materials
capable of energy harvesting include PVDF, P(VDF-TrFE), P(VDF-HFP), PP, Nylon11, PAN etc. Recently, two
Japanese companies, Murata and Tenjin, have launched an innovative fibre “PIECEX”, which can harvest
energy from human movement. PIECLEX utilises the piezoelectric effect of plant-derived polylactic acid fibre to
generate electricity from the movement of the wearer and can have an antibacterial function without using
chemicals and is shown in Figure 28.6 [10, 14].
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Figure 28.6 (a) Application of piezoelectric nanogenerator and (b) Commercial products manufactured
by PIECLEX
(a) (b)
28.3 Nonwoven Manufacturing

Nonwoven fabrics are engineered textile materials that are manufactured directly from fibre. As per definition
by ISO standard 9092 and CEN EN 29092- “A nonwoven is an engineered fibrous assembly, primarily planar,
which has been given a designed level of structural integrity by physical and/or chemical means, excluding
weaving, knitting or paper making. In a nonwoven fabric, the fibre webs are bonded together chemically,
mechanically or by application of heat. The manufacturing of nonwoven is a three-step process.
28.3.1 HydroSpace technology

HydroSpace is an economical way of adding value and functionality to a fabric at the point of manufacture.
HydroSpace spunlace fabrics are light weight nonwovens with predefined cavities in the cross-section and these
cavities can be engineered to many different shapes and sizes. These cavities can either be left empty or they
can be filled with gels, waxes, cosmetics, detergents and solid particle to functionalise fabric. This technology
is being used in fire retardants, ballistic protection devices and blood filtration equipment. These nonwovens
are manufactured by simple retrofit to existing production line where the fabric is produced by
hydroentanglement [15]. The products manufactured by this method are shown in Figure 28.7.
Figure 28.7 Nonwovens with different cavities manufactured with HydroSpace technology
_______________________________________________________________________________________________

___________________________________________________________________________________________________
28.3.2 Wetlace nonwoven process

This process combines two techniques – welt-laying and hydroentanglement. This production method is ideal
for producing flushable wipes. Wetlace nonwoven production is carried out in four steps in the neXline system
as shown in Figure 28.8 and 28.9. For the flushable wipes, they must have excellent tensile strength to
withstand the production process as well as the handling during the usage. Once these wipes are flushed into
water, their stability will disappear entirely and they will gradually dissolve in the sewage water system[16].
Figure 28.8 neXlineWetlace process flow
Figure 28.9 Flushable green wipes by Wetlace process
28.3.3 Hyper-punching nonwoven

In this method, the nonwovens are prepared by conventional needle-punching technique; the process of
punching the fibrous web is modified. This modification in the punching offers minimal fibre damage with
higher production rates. As compared to regular drive mechanism, the needles in the hyper-punch move along
with the material rather than blocking the material passage. Also, the needles in this system have elliptical
shape, which ensures maximum throughput rate [17]. The hyper-punch needle loom and its needle module is
shown in Figure 28.10.
Figure 28.10 (a) Hyper-punch needle loom and (b) needle module used
(a) (b)
_______________________________________________________________________________________________

___________________________________________________________________________________________________
28.3.4 Phantom nonwoven technology

This is a hybrid nonwoven technology which combines air-laid and spun-melt technologies to deliver new,
flexible ways of creating wet and dry wipes (Figure 28.11). Phantom technology offers additional benefits by
reducing resources and cost, while increasing overall performance. The spun-melt and air-laid processes are
merged into one step to combine cellulose fibres, long fibres such as cotton, or even powders with polymer
fibres in extraordinary ways [18].
Figure 28.11 (a) Phantom technology and (b) manufactured end-product
(a) (b)
28.3.5 Electro-spun nonwovens

Electrospinning is a technique of producing fibre with a diameter in nano range by dissolving the polymer in a
suitable solvent followed by spinning of the polymer solution through a spinneret under a high-voltage electric
field. These electro-spun fibres have wide range of applications such as filtration, composite materials, medical
membranes etc. Elmarco’s Nanospider™ NS 8S1600U is the base spinning unit for the industrial production of
nanofibers and is shown in Figure 28.12. This is needle-free technology which offers a high production rate of
nanofibers. Figure 28.13 shows the microscopic images of nanoweb [19, 20].
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Figure 28.12 Electro-spinning production line for nonwoven
Figure 28.13 Electro-spun fibrous web
28.4 Technologies for the production of 3D

nonwoven structures
28.4.1 Vertical lapping system
With the expansion of the application domain of the nonwovens, different approaches have been used to
impart special properties to the final product. One such approach is to use Highloft nonwoven structures [21,
22]. Highloft nonwovens have low density with high thickness to weight ratio. STRUTO® is a nonwoven
manufacturing technology which produces Highloft nonwoven structures in which the fibrous webs are lapped
vertically. STRUTO® in the basic system consists of a STRUTO® vertical vibration lapper and through-air
thermobonding chamber. Figure 28.14 shows the schematic of STRUTO® with the sample cross-section.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Figure 28.14 Process flow of vertical lapping process and cross-sectional images of different samples manufactured [22]
STRUTO® filter media
STRUTO® -Virgin polyester
28.4.2 3D Web Linker technology

For manufacturing nonwoven with high bulk and 3D structure, NAPCO® utilised two needle punched webs
with defined space between them, maintained with the help of a specially designed spacer. This technique
uses 3D Web Linker®, a special machine developed by Laroche. NAPCO® technique along with end product
manufactured is shown in Figure 28.15 [23, 24].
Figure 28.15 Pictorial presentation of (a) 3D web formation technique (b) structure of end product (c)
end-product with 5 mm spacer using fork type needle
(a) (b) (c)
In this process, special barb or fork needles that are arranged in rows penetrate simultaneously from both
sides of the two pre-needled nonwovens that creates fibre bridges formed by fibre bundles, and therefore the
structure of the layers should contain enough unbounded fibres of sufficiently great fibre length. This type of
hollow nonwoven can be filled with different materials in various forms such as granules, powder, foam etc. to
make composites suitable for wide variety of applications [25].
_______________________________________________________________________________________________

___________________________________________________________________________________________________
28.4.3 Stitch bonding (Maliwatt, Malivies, Kunit, Multinit)

Stitch bonding is a method of joining fibrous web to form nonwoven structure by means of external yarn or by
looping the fibres available in the fibre web and depending upon technique used for binding the fibre web, the
material can be stitched in both machine as well as in cross direction [26, 27]. These nonwoven fabrics with
stitch bonding show enormous potential for various applications such as aerospace composites, automotive,
wind energy, upholstery, filtration, geotextiles etc.
Table 28.1: Stitch Bonding Techniques
Stitch bonding
Working principle Ref.
technique
In this process, set of pointed needles

adjacent to each other pierce the stitching
Maliwatt [26]
yarn through the fibre web in a simple or
complex pattern to form a nonwoven fabric.
In this technique, multi-layered webs are

stitched together without any additional
Malivlies stitching yarn. The webs are connected by [26, 28]
the loops which are formed from the fibrous
web itself.
These are three-dimensional nonwoven

fabric manufactured by joining lengthwise
oriented web in which one side has stitches
[26, 28–
Kunit while the other side has pile structure with
30]
vertical fibre arrangement. This technique
produces nonwovens up to 10 mm
thickness.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
One or two nonwoven fabrics preferably

kunit nonwovens are used as base material.
In the end product, the two nonwoven
surface textiles are interlaced by fibres,
Multikunit [30, 31]
forming a uniform and tight surface, being
connected by almost vertically arranged
fibres. This technique produces nonwovens
up to 16 mm thickness.
28.5 Textile preforms for composites

The use of composites as engineering material has opened up a new horizon in materials science. The
widespread use of composites in structural and semi-structural applications has played an important part in
shaping modern developments. Textiles are among the most efficient reinforcements for composite materials.
The employment of fibres such as carbon, glass, Kevlar and natural fibres has been augmented in several
industrial applications. Textile reinforcements can be in the form of fibre, yarn, and fabric depending on the
end-use application. Figure 28.16 shows the different type of textile preforms used in composites [32–34].
Figure 28.16 Different types of textile-preforms used as composite reinforcement
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Textile preform manufacturing technologies

28.5.1 Single layer quasi-isotropic fabric
This braided triaxial fabric is balanced in all directions in a single layer. It has quasi-isotropic architecture
which provides uniform stiffness in all directions and also allows easy lay-up of multiple layers. This type of
preform has application in fields such as industrial communication and tooling, automotive, aerospace, and
recreational. In case of woven preform, the fabric needs to be cut at different angles to manufacture quasi-
isotropic laminates which leads to lot of material wastage. But in case of “QISO” the plies can be tailored and
cutting does not require any rotational placement [35].
Figure 28.17 Quasi-isotropic braided triaxial fabric
28.5.2 Near-net shape preform by unidirectional fibre

In this indigenous process, unidirectional dry fibres are directly converted into near-net shape preforms. This
method is known as “D3D” fibre preform where “D” stands for “dry” and “3D” stands for “three-dimensional”.
This process eliminates the cutting stage thus leading to minimal material loss. In this process in-plane fibres
can be arranged in any direction along the principal structure pattern without cutting the fibres [36].
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Figure 28.18 (a) Process flow of “D3D” process (b & c) Final products prepared by this method
(a)
(b)
(c)
28.5.3 Radial braiding technique for 3D preform

Herzog radial braiding cell is developed to manufacture lightweight braided 3D preforms with biaxial and
triaxial set-up and is shown in Figure 28.19. The bias set-up angles may vary from 10° to 80°. In this
technique, the manufacturing of complex shapes 6-axis can be manipulated. The yarn packages are arranged
radially to have minimum fibre damage with wide range of material processing capacity such as carbon,
Kevlar, ceramic, and metallic fibre [37].
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Figure 28.19 Radial braiding technique
28.5.4 3D Knitting Technology

This 3D-knitting technology offers an excellent solution for manual layup and cost-effective manufacturing.
The RT2i® technology can manufacture near-net shape preform in one piece with variety of different yarns
such as carbon, glass, or quartz and is shown in Figure 28.20. With this process, there is no raw material
waste and cutting and draping times are significantly reduced. The thermoplastic resin can also be knit
together with the reinforcement materials to enhance quality and reduce raw material handling cost [38].
Figure 28.20 Fully automated 3D Knitting Technology
_______________________________________________________________________________________________

___________________________________________________________________________________________________
28.5.5 3D-Crimpless preform by Noobing

Noobing is a technique designed to manufacture 3D-crimpless fabrics. This technique was first pioneered by
Nandan and Fredrik in 1997. Noobed fabrics are currently developed by Fureha, AB. Noobed fabrics can be
prepared using various fibres like carbon, ceramic, aramid, glass, flax etc. The composites reinforced with
noobed fabrics can be used for load-bearing and thermal applications [39–41]. The schematic figure of the
noobing process and commercially available products are shown in figure 28.21.
Figure 28.21 (a, b, c & d) Schematic of the Noobing process with three yarn layers, (e, f, g & h) Noobed
fabric prepared by corresponding four steps (i & j) Noobed fabric with 11 and 3 layers, (k) commercially
available carbon fibre-based noobed fabric
28.5.6 WEAV3D process for thermoplastic prepeg consolidation

It is a patented technology “WEAV3D” which produces tape lattices which are designed for use in high-volume
moulding processes like thermoforming, compression moulding, or injection moulding. The process flow of this
technique is shown in Figure 28.22 [42].
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Figure 28.22 Process flow of WEAV3D process from tape to composite
28.5.7 3D-woven preforms by Jacquard weaving

These modified jacquard looms produced 3D fabrics by splitting the warp fibre (oriented in the direction of
fabric production) to create multiple sheds (spaces through which the weft or filling fibres are inserted at right
angles to the warp) and is shown Figure 28.23. If the warp ends are moved up or down during weaving, then
the fabric can be made to consist of several layers stacked vertically. Warp ends can be interlaced with fill
fibres in the adjacent layer to produce layer-to-layer locked fabrics, or they can be interlaced with fill fibres in
the top and bottom layers to create 3D fabric preform [43].
Figure 28.23 3D woven preform (a) manufacturing process by jacquard loom (b & c) 3D woven preform of aeroplane parts
[a] [b] [c]
_______________________________________________________________________________________________

___________________________________________________________________________________________________
28.6 Material and Technology Trends in

Technical Textile Products
Technical textiles cater to different areas of applications such as agriculture, automotive, medical and hygiene.
Unlike traditional textiles, technical textiles is a knowledge driven, innovation led, low volume and high value
industry. The global market is led by US and EU.
Due to availability of raw material, presence of a well-established textile supply chain, low labour cost and
high domestic consumption, India has a high potential for growth in the field of technical textiles. Favourable
Government policies and support with innovation and product development can further boost investments in
technical textiles in India. A glimpse of important products is presented here.
Table 28.2: Agrotech
Leno fabric woven from black PP yarns with

approximately 50% open area. The open mesh design
Crop Covers reduces wind speed without creating turbulence. Ideal [77]
for protecting fruit trees, plants, and crops from
damaging winds.
Knitted net for This knitted net provides protection against rain splash,
[78]
crop protection hailstorm, rabbits, pigeons and other vermin.
These closely woven anti-UV treated polyethylene nets

Woven nets for
prevent the intrusion of Drosophila suzukii in soft fruit
protecting fruit [79]
crops. These nets provide very good aeration and high
flies
resistance.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
A knitted high-density polyethylene (HDPE)

monofilament net. It is used to protect vegetable crops
Bird net [80]
against damage to seeds and young plants caused by
birds.
This net is knitted from 100% HDPE monofilament and

Anti-hail Net [81]
provide protection to the crops against hailstorm.
It is a woven textile comprising a unique mix of two

polymers, one biodegradable and one compostable.
Biodegradable
After three years of efficient weed control this fabric [82]
mulching fabric
will eventually break down, and biodegrade and convert
into humus, water, and CO2.
It is a mulching sheet made by spunbond technology.

Due to its simple structure, this material allows sunlight
Mulch net [83]
to penetrate while protecting against UV rays and
retaining moisture.
This is a UV stabilised, white polypropylene woven

Foliage removal fabric, reinforced for extra strength. It is specially
[84]
fabric designed to fit in greenhouse corridors and has
excellent performance due to the reinforced edges.
This mesh is a nonwoven fabric which acts as

agricultural thermal blanket. It is UV stabilised. Because
Anti-frost mesh of its porosity, it allows the passage of air and water. It [85]
can be used in different types of crops: agriculture,
horticulture, fruit growing, and nurseries.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Table 28.3: Geotech
This nonwoven is composed of continuous

Thermally polypropylene filaments. The fibre extrusion process
bonded produces thousands of superfine continuous filaments,
[86]
nonwoven for which pass through a “pre-stretch” stage. This
erosion control nonwoven can be used in railway, erosion control,
roads, and drainage.
This is a needle-punched nonwoven polypropylene

Needle-punched
paving fabric that is recyclable, and compatible with
nonwoven [87]
placement directly on milled and smooth pavement
paving fabric
surfaces. This fabric has 360° of strength homogeneity.
Recycled fibre- It is a nonwoven geotextile used to construct retaining

based nonwoven structures, linear constructions, waste deposits, [88]
for drainage drainage systems, etc.
This inter-grain, geonet is made from high-density

polyethylene (HDPE) laminated by polypropylene (PP)
Laminated
geotextile on one side and by hydro insulation foil on
nonwoven for [89]
the other one. Its pattern creates channels with high
hydro insulation
flow capacity under pressure and also at very low
gradients.
These meshes are made from woven glass fibre strands

Woven fibre
which are embedded into wet basecoat plaster. These
mesh for [90]
fibre glass meshes are used for reinforcing plaster and
construction
mortar.
These geotextile tubes are monolithic-tubular

containers fabricated by multiple pieces of engineered
Coastal
synthetic woven fabrics. These structures provide [91]
protection
coastal protection to seawalls, dunes, breakwaters,
groins, and revetments, etc.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Green
It is a 100% biodegradable, mechanically bonded
nonwoven for
separation, and filtration nonwoven, that fulfils the [92]
filtration and
functions of separation, filtration, and protection.
separation
Jute geotextiles have been found useful for control of

Jute geotextiles
surface soil erosion, construction of embankment on
for highways
weak soil as well as strengthening road pavement and [93]
and
surface for separation drainage and temporary
embankments
reinforcement
Table 28.4: Indutech
Laminated These filter socks are available in both PP and ePTFE

nonwoven filter- felt backed laminates and are used to filter tube [68]
tube assemblies assemblies.
Nonwoven felts of meta-aramid or para-aramid,

Hot gas filtration ceramic or glass fibres which can withstand high [69]
temperature and thus suitable for hot gal filtration.
These belts are manufactured using a fabric having

high tenacity, straight warp threads and dense weft
yarn construction. The cover compounds used in
Conveyer belts [70]
conveyor belts ensure higher longitudinal flexibility
while guaranteeing very low elongation while working
with high loads.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Flexible hose pipe with knitted or braided casing and

Hose pipes [71]
latex polymer at the core.
Nonwoven and woven cloth combined and coated with

Abrasive fabrics [72]
aluminium oxide to give finishing to surfaces.
High-
performance Braided ropes of UHMWPE or other high-performance
[73]
ropes and fibres used for mooring ships and boats.
cordages
Umbilicals utilise thermoplastic unidirectional tapes for

their lightweight and high tensile strength. umbilicals
Advanced
are ideal for protecting important electronics used to
composites for [74]
communicate with equipment below the surface. Also,
oil and gas
these composites are inherently fire retardant without
the addition of secondary toxic fillers
It is manufactured by unique 3D honeycomb structure

Honeycomb
with a diagonally braced double-raschel weave through [75]
structure
an advanced process.
This soft shackle is made of Stealth Fibre® UHMwPE.

Stealth Technology® simultaneously increases fibre
Braided shackles [76]
crystallinity, provides abrasion-resistant protection, and
evens out all stresses in ropes.
Stealth Technology
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Table 28.5: Meditech
Different types of yarns polyester, polypropylene, PGA,

Implantable PLA, PTFE, nylon, UHMWPE, Lycra/Spandex are used to
[52]
medical Textiles manufacture medical textiles. These medical grade
polyesters are produced using special extrusion.
Highly-absorbent and disposable sheet technology by

Water repellent encapsulating liquid and moisture, while also preventing
[53]
hospital linen penetration and at the same time providing optimum
care and comfort for the patient.
Reusable 100% polyester woven PU coated breathable and

Personnel reusable fabric for protection of the health care
[54]
protective professional. The polyester used in this fabric is made
equipment from 100% recycled polyester fibre.
Knitted
compression Weft circular knitting and warp mesh knitting for
[55]
stockings and custom-made products.
bandages
Composite
3D mesh prepared from collagen coated polyester yarn
knitted Mesh for [56]
by warp knitting.
Hernia
Undyed short-term absorbable synthetic monofilament

suture made of glyconate for stitching of soft tissue.
Biodegradable
Monofilament sutures appear to have the lowest [57]
sutures
infecting rate and cause less tissue drag and less
tearing because of their smoothness.
These are nonwoven masks with straps ideal for

Surgical mask [58]
surgical and general-purpose use.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Table 28.6: Mobiltech
100% polyester woven webbing, is UV resistant with

Seat belt [60]
shrink, rot, moth, and mildew resistance.
Tightly woven fabric with high strength and low gas

Airbag fabric permeability, it helps enhance driver and passenger [61]
safety.
These knitted fabrics have versatility of drawings and

Car headliner different type of yarns. This knitted fabric offers
[62]
fabric advantage as headliners because it’s easier to mould
due to its elasticity and high ripping resistance.
The main materials used include kenaf, which grows

Natural fibre
year-round and has excellent CO2 absorbing properties,
composite for [63]
and plant-derived plastic, making them environmentally
door trim
friendly.
Thermal Comfort is designed to deliver a personal

Smart textile for
climate environment via specific zonal controls to the [64]
car seat
occupant.
A layered system that can be customised for seat

Multifunctional covers to include any or all of the following protective
fabric for seat attributes: anti-odour to absorb odours and inhibit [65]
covers growth of mildew and bacteria; anti-static to eliminate
static electricity; anti-dusting to resist dust.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Using Wilton fabric, a traditional British textile, this

Specially
painstakingly woven product is highly durable, making
finished woven [66]
it suitable for sports driving. This car mat also has
car mat
deodorant, antibacterial and soil-resistant functions.
It is a range of carbon fabrics which have been

Woven carbon processed for a smooth, closed weave and uniform
fabrics for cosmetic appearance. The fibre tows are spread in both [67]
automotive roof the warp and weft direction for unique aesthetic
appeal. It is used in BMW roof.
Table 28.7: Protech
Multi-layered assembly of woven or unidirectional

Soft body fabrics made from aramid or UHMWPE fibres that can
[44]
armour give protection against 9 mm bullet, fulfilling the
requirement of Indian standard IS 17051: 2018.
This custom suit is made from carbon nanotubes. The

Bulletproof suit material is thinner, lighter, and more flexible than [45]
Kevlar.
P-aramid microfilament fabric with a functional silicon

Protection
carbide coating that is bonded by a special matrix
against sharp [46]
system. Provides protection against ballistic impact,
objects
sharp and pointed weapons.
Flame retardant Polyacrylate based yarn resistant to flames, high

[47]
textiles temperatures, and chemical agents.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
Multilayer assembly of fibrous materials containing

Extreme cold breathable fabric layer and hollow fibres. Used for cold
protective protection. [48]
textiles
Nuclear,
Textile material coated with double PVC coating
biological,
quipped with HEPA filters. Welded safety boots and [49]
chemical (NBC)
voice communication system.
protective suits
Electromagnetic
Silver or copper plated-Nylon fabrics (woven and non-
shielding and
woven) can be used in sensors, EMI shielding, and [50]
reflecting
reflection.
textiles
High visibility Reflective coating on polyester yarn combined with

[51]
clothing glass beads for high visibility clothing.
_______________
All references in this section are detailed out in Annexure 35 – Citations for Section 28 (Emerging Technologies and technology trends in technical
textiles)
_______________________________________________________________________________________________

29. Recommendations to
overcome impediments to
growth of Indian Technical
Textile industry
29.1 The case for making recommendations
There has been a rapid increase in the use of technical textiles throughout the world. The level of resources
and number of available opportunities that characterise Indian technical textile industry seem to suggest that
there is a huge potential that is waiting to be unlocked. Technical Textiles not only offer better and cheaper
substitutes for other materials but also provide appropriate choices for completely new applications. This has
resulted in emergence of new ideas, development of large number of innovations and introduction of new
products and processes. Experts believe that this trend will accelerate further in the coming years. The current
scenario makes it imperative that impediments to growth of Indian technical textile industry be identified and
recommendations to counter those impediments be made. Such an approach is likely to contribute
significantly towards enhancing the growth of Indian textile industry by improving its international
competitiveness. The impediments and recommendations have been described in the following sections:
29.2 Impediments to growth of technical

textiles industry in India
The Indian technical textile industry faces several impediments to growth. The major impediments identified
as part of the present study are as follows:
1. Inadequate production of High Performance Fibres in India despite a growing demand is not
only a cause for drain of precious foreign exchange reserves of the country, but is also representative of
loss of an attractive business opportunity for the domestic industry. The research related to smart and
electronic textiles that is being conducted in India is still at a nascent stage and some of it is being
carried out by non-textile departments of technology institutes.
2. Absence of a formal mechanism for regular collection of reliable and comprehensive

nation-wide data of production capacity and enterprise level medium and long-term production plans
for different technical textile products makes it difficult to assess degree of alignment of production
_______________________________________________________________________________________________

Section 29: Recommendations to overcome impediments to growth of Indian Technical Textile Industry
___________________________________________________________________________________________________
output with product level production capabilities and market demand. Therefore, it becomes difficult to
identify and properly target the incentives towards those items for which high production and market
potential exists in the country.
3. Lack of entrepreneurship culture and absence of skill-training for entrepreneurship

development in the area of technical textiles makes it difficult to attract investment and augment
existing production capacities in the country.
4. Deficient supplier-manufacturer and customer connect and lack of fora for enabling their
close collaboration often leads to information asymmetry and sub-optimal decisions which cause
wastage and inefficiencies in the value chain.
5. Inadequate number (207) of designated HSN codes for technical textiles makes it challenging
to determine accurate ‘actual’ product-wise and enterprise-wise trade data. This may be causing sub-
optimal planning and inaccurate targeting of export benefit/incentives in India.
6. Lack of globally-aligned quality standards for technical textiles in India makes it challenging
for Indian manufacturers to produce technical textile products that are widely accepted around the
world. This has the effect of reducing global competitiveness of Indian technical textile industry. The
inadequacy of standards also makes it difficult for manufacturers to engage in continuous innovation.
7. High level of import and export dependence on a limited number of countries has been
observed in case of certain critical technical textile items. This affects the reliability and affordability of
supplies of crucial technical textile inputs at times. Indian industry’s dependence on only a few partner
countries as export destinations reduces its ability to negotiate good terms of trade.
8. Inadequate domestic production capacity of certain products whose consumption in India

is high (E.g. high performance sportswear and swimwear, Smart textiles etc.) has resulted in
dependence on imports to meet the demand. This represents a significant loss of a business
opportunity for Indian technical textile manufacturers who may have the capability to produce the
required products.
9. Inadequate production capacity for technical textile machinery and components is a

dampener for the operations and growth aspirations of many entrepreneurs in India’s technical textile
industry. Due to their being imported, the machines and equipment are not designed exactly for Indian
requirements and conditions, often the cost of the imported machines is high and access to supply of
spares and comprehensive service support is difficult. Therefore, the reliance on imported machines and
machine components makes it relatively uncertain and expensive for the Indian manufacturers to
execute not only their existing operations but also their expansion and diversification plans.
10. Small share of international trade for Indian exports may be acting as a discouragement for
Indian entrepreneurs and making them perceive the industry to be less attractive and having uncertain
prospects.
11. Inadequate R&D facilities for technical textiles in the country is a hurdle for the industry
because it stifles innovation in a field that is characterised by fast changes in products and processes.
12. Relative inability of textile industry to attract and retain talent is proving to be a major
impediment to the growth of the industry because availability of good quality human resources is at the
_______________________________________________________________________________________________

___________________________________________________________________________________________________
core of industry’s performance. The relative lack of high quality individuals working in the industry
makes the investors and entrepreneurs perceive higher risk, more uncertainty and less competitiveness
for the industry.
13. Low level of adoption of latest technologies such as 3D nonwovens, multiaxial braiding, 3D
weaving, warp knitted spacer etc. has contributed towards reducing competitiveness of domestic
industry.
14. Inadequate testing facilities in the country for technical textiles act as a bottleneck for the
growth pathway of the technical textile industry as it leads to delays and inaccurate assessments at the
industry level. Due to the lack of some of the specialised testing facilities (even at the CoEs), the
technical textile units are compelled to send samples to testing laboratories located abroad, which often
involves very high cost and leads to delays in product development and marketing.
15. Prevalence of current inverted duty structure puts manufacturers of technical textile products in
India at a significant disadvantage and it makes domestic manufacturing of certain technical textile
products uneconomical when compared with importing them.
16. Lack of international exposure for stakeholders through participation in trade shows, exhibitions,
workshops, conferences, impedes their learning from networks and updating their knowledge about
latest developments resulting in missing out on business opportunities.
17. Slow pace of development of standards and their adoption may be holding back the pace of
industry’s growth and its global competitiveness.
18. Delay in strengthening of the educational institutes (textile engineering/technology

institutes) is likely to be one of the contributing factors towards lack of high-quality trained human
resources in India’s technical textile industry. Absence of a dedicated/exclusive centre of technical
textiles has deprived the industry of a knowledge hub that can serve as a focal point for exchange and
dissemination of latest knowledge about technical textiles. Faculty development programmes specifically
aimed at equipping textile engineering faculty with latest knowledge and research in technical textiles is
also a major lacuna that is negatively impacting the technical textile industry. The courses and
programmes in the institutes have not been updated in a manner that they include technical textile
training and education as a significant part of modern textile engineering and technology education.
Most of the educational institutes offer only one course subject related to ‘technical textiles’ which
proves to be inadequate in promoting appropriate exposure to existing and emerging developments.
This deprives the industry of new knowledge and acts as an impediment.
19. Delay in strengthening the Textile Research Associations (TRAs) and Centres of Excellence
(COEs) has resulted in TRAs and CoEs being unable to attract and retain high quality talent on a
consistent basis, especially at the middle and junior levels for scientific research and development. A
large number of research scientists are appointed on contractual basis, and their salary scale is not at
par with DST or CSIR institutes/organisations. TRAs are also beset with research infrastructure that has
not kept pace with rapid rate of changes in technical textiles. This has led to the industry missing out
on sustained growth. Further, most of the COEs are located in the western region of India constraining
the access to their facilities by the user groups.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
29.3 General recommendations to promote

growth of technical textiles industry in India
The recommendations for addressing the impediments to growth have been classified into two broad
categories, general recommendations and specific recommendations. The general recommendations have
been further divided into three groups, short-term (for implementation within a two year period), medium-
term (for implementation within a three year period) and long-term (for implementation within a five year
period).
29.3.1 Short-Term Recommendations

1. Expert-group to be set up to recognise and incentivise products that have good potential
for production enhancement across all technical textile segments: The field of technical
textiles is in its early evolution phase. The pace of change is fast and rate of product obsolescence is
high. It is recommended that the Ministry of Textiles (MoT), Government of India should constitute a
special expert-group to study and document the current production capabilities (from a product and
application perspective) of Indian technical textiles manufacturers and clearly identify those Indian user
industries whose market growth is moderately constrained due to their partial dependence on imports
of technical textiles. The focus should be on such user industries which will be able to expand their
domestic and export markets if the Indian technical textile producers could supply them inputs of
acceptable quality at competitive prices. Once the expert-group recognizes such user industry and their
technical textiles inputs, a package of incentives and other measures must be rolled out by Government
of India to motivate India’s technical textile producers of identified products to ramp up their production
capacities significantly and quickly. Ministry of Textiles (MoT) must facilitate a intra industry platform
where the leaders of user industries can freely interact with leaders of technical textile input producing
enterprises to iron out difficulties and improve efficiency of the entire Value Chain due to free flow of
information about requirements and capabilities.
2. Set up a committee to identify those technical textile products for which the domestic
market is steadily increasing and to recommend measures to help boost their production in
India: It is important for MoT to identify and prepare a list of those products that rely on technical
textiles as an input and whose demand is likely to experience an expansion at relatively faster rates in
the years to come. It is recommended that a committee must be set up to examine all the application
segments of technical textiles and identify high-growth products and then suggest measures that can
serve as financial and non-financial incentives to boost production of the technical textile inputs for such
products.
3. Encourage and financially support the designing and conducting of industry-oriented short-
term courses and programmes to encourage and support entrepreneurship in technical
textile industry: Growth of entrepreneurship in the emerging field of technical textiles is an absolute
_______________________________________________________________________________________________

___________________________________________________________________________________________________
must for not only enhancing domestic production capacities but also generating employment and
augmenting growth in the economy. Therefore, the focus of training and educational institutions in this
sector must be on offering short term courses and special programmes that equip the participants and
students with necessary confidence, knowledge, skills and practice to think practical business and
become entrepreneurs or intrapreneurs in the field of technical textiles. MoT must take a lead and
provide a platform for collaboration among the industry associations such as ITTA, CII, FICCI,
ASSOCHAM etc., the leading technical institutions and Business Schools of India and skill training
institutions to formulate training and education programmes that are necessary to foster
entrepreneurial culture and enable the participants to leverage the learning acquired in such courses to
set up and expand technical textile ventures. MoT can consider earmarking separate funds to financially
support institutions who are able to propose, offer and conduct such entrepreneurship-oriented
programmes.
4. Leverage the existing Focus Incubation Centres (FICs) to foster incubation: The eleven FICs
established by the Ministry can be leveraged to enhance business incubation and support start-ups. The
success stories from some of the FICs can help to develop different models of incubation among the
FICs.
5. Foster better supplier-manufacturer-customer connect to improve effectiveness of value

chain: The free flow of adequate and appropriate information can significantly improve the efficiency of
technical textile industry is India. Since the industry is in its early evolution phase, it is characterised by
the industry participants often exhibiting lack of transparency and being reluctant to share information
due to the fear of losing competitive advantage. It is suggested that MoT must have a two-fold
approach to facilitate faster and accurate information flow among stakeholders of the technical textile
value chain in India. Firstly, a pilot project must be launched to have a web-based information sharing
portal/section hosted on the MoT website for 3-6 months. Latest content about important developments
and techno-commercial information related to technical textiles must be hosted on an interactive
module available on MoT website. Based on the learning derived and feedback that is received from
users, the pilot module must be expanded to become a full-fledged information portal about technical
textiles. A mechanism must be established to update the information that is hosted on the portal so
that it is available to users. Later on, a subscription based model can be considered so that the costs of
the portal can be offset and it can be ensured that the portal acts as a forum for genuine and serious
users of the information. Secondly, The MoT must support formal buyer-supplier meets, workshops etc.
through online as well as physical mode. It is recommended that these should be regular events with
pre-declared six monthly/annual schedule so that the formal meet activity acquires a certain degree of
importance and participants prepare seriously for better outcomes.
6. Continuously expand the HSN Code list of technical textiles to keep pace with the
development and emergence of ever newer products in the industry: The Harmonized System
(HS) is an internationally accepted standard for the classification of different products. HS facilitates
international trade by enabling the participant countries to classify the trade goods on a common basis
in a systematic manner. In 2019, the Directorate General of Foreign Trade (DGFT), Government of
India incorporated a list of 207 items as technical textiles items from chapter 1 to 99 of HSN
classification book. This special classification of 207 codes is a pioneering step to boost the growth of
technical textile industry in India by helping to better monitor the import and export data and to better
_______________________________________________________________________________________________

___________________________________________________________________________________________________
target the fiscal support to the deserving units in technical textile industry. IIT Delhi has followed a
well-defined process and recommends that this list of 207 HSN codes for technical textiles be expanded
to 449 codes and Government of India must actively consider notifying these 449 HSN codes in
accordance with the analysis and segment-wise classification carried out by IIT Delhi team.
It is also recommended that MoT must work closely with the Ministry of Commerce to ensure that the
exercise of rationalisation and notification of technical textile codes should be an ongoing one and even
this list of 449 codes recommended must keep getting augmented and updated as new developments
in material science, application engineering and international trade take place. As an example, it may be
noted that none of the items in the 449 codes suggested pertains to Oekotech segment due to lack of
accurate information. This, among others needs to be updated as more information about new
developments becomes available.
29.3.2 Medium-Term Recommendations

7. Encourage establishment of globally-aligned quality standards and their rapid adoption
among all members of the value chain: The improvement in credibility and consumer acceptance
of technical textile products is linked to establishment and notification of globally aligned quality
standards. The MoT, the technical institutions, the research laboratories and the industry associations
must work in close collaboration with BIS on a continuous basis to help establishment of globally
aligned standards for technical textile input material as well as final products. The efforts towards this
when carried out for sufficient period will contribute towards reduction of uncertainty and improving
industry-wide efficiency and effectiveness. This will also result in improvement of international
competitiveness of India’s technical textile industry. MoT must initiate the creation of an empowered
group of experts from among different stakeholder groups and provide Government’s support for this
effort. Further, safety and other related regulations need to be enforced across industries to propel
demand for technical textiles products. Efforts should be made to create awareness about quality
standards to the last member in the value chain for wider adoption of the standards.
8. Support identification and conducting of trade with more partner countries so as to reduce
India's export-import dependence and de-risk operations of technical textiles industry: The
technical textile products for which India’s industry relies heavily on a very small number of export and
import partner-countries must be identified. Such a situation is fraught with high degree of risk for
Indian economy. The de-risking exercise involves finding and entering markets of hitherto unexplored
countries/ emerging markets of technical textiles to serve as export destinations and identifying and
negotiating with new partner countries to act as sources of imports. This task must be taken up by MoT
in collaboration with different trade bodies as well as Ministry of Commerce and Ministry Of External
Affairs. A focused target-oreinted approach with defined milestones must be launched to de-risk India’s
economy by reducing dependence on small number of countries.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
9. Actively encourage domestic production of products with high-consumption potential:

Additional production capacity needs to be established for those products, which have a high potential
for consumption such as high-performance swimwear and sportswear to leverage ‘Khelo India’ initiative,
the latest and the most prestigious programme of Government of India to foster a sports culture at
grassroots level. The increase in interest among Indians to play sports and games has led to increase in
the demand for ‘high-performance’ sportswear and swimwear (which has a significant content of
contemporary technical textile material) for which India has to rely significantly on imported supplies.
Since, the emphasis placed by Government of India on sports and games is likely to continue, the
resultant increase in demand for high-performance sportswear and swimwear in the future is a
certainty. It is strategically advisable for MoT to provide special support to the potential indigenous
manufacturers so that affordable and adequate domestic production can be ensured and import
dependence can be reduced. Such an initiative will act as a multiplier to Government’s Khelo India
initiative and is likely to contribute towards enhanced performance of Indian sportspersons. It is
suggested that a special effort on the lines of the efforts made for stepping up domestic production of
PPE Kits and masks in year 2020 be launched by MoT in collaboration with Ministry of Sports and Youth
Affairs, Ministry of Industry and Ministry of MSME.
10. Actively encourage and financially support indigenous development of technical textile
machinery components: The high dependence of Indian technical textile industry on imported
equipment and machinery should be reduced. MoT must consider launching a special scheme to
support industry-academia project proposals for research and development leading to indigenous
manufacture of components initially and sub-assemblies/assemblies later on.
29.3.3 Long-Term Recommendations

11. Continuously identify and focus on technical textile products and segments to align the
support with priorities of Atmanirbhar Bharat (Self-reliant India) and expansion of
India’s exports. The following recommendations are proposed by IIT Delhi: Chapter 9 of
the present report includes an analysis of domestic and international consumer demand of
technical textile products, an initial attempt has been made based on that analysis for identifying
products and segments that can be focused on. The segment and product-based recommendations
are listed as follows:
i. Agrotech: The production of Agrotech products (Rs. 2,244 Crores in 2019-20) in India exceeds
their consumption (Rs. 1,890 Crores in 2019-20). This presents India with the possibility of
exporting its surplus of production over consumption. High quality production and expansion of
Fishing Nets, Mulch Mats and Crop Covers should be given special support so that India can
increase its exports.
ii. Buildtech: Consumption of Buildtech products exceeds their production. India is a net importer
and the gap between production (Rs. 4,196 Crores in 2019-20) and consumption (Rs. 5,008
Crores in 2019-20) is expected to remain almost the same in value terms for the next five years.
However, the suggested focus of the government support should be directed towards
encouraging production of Architectural Membranes and Acoustic fabric for import substitution
_______________________________________________________________________________________________

___________________________________________________________________________________________________
and on Canvas tarpaulin and HDPE Tarpaulin for enhancing India’s exports. The growth of India’s
current exports of Hoardings and Signages material (Flex fabrics and banners) are likely to slow
down due to the non-bio degradable nature of the waste generated. Efforts should be made to
develop environmentally benign material for hoardings and signages.
iii. Clothtech: The consumption (value estimated at Rs. 8,205 Crores in 2019-20) of Clothtech
products exceeds the production (estimated value Rs. 7,680 Crores). India is currently an
importer and is going to remain one even though the gap between production and consumption
is likely to remain almost the same in value terms. The focus of government’s incentives can be
beneficially directed if Elastic narrow tape, Hook and loop fastener, Interlining and Zip fastener
tape are encouraged for import substitution in domestic market. Incentives should be given to
industries producing Labels and Badges as also those producing Specialised and Industrial
Sewing thread so that their exports from India can be increased.
iv. Geotech and Oekotech: India is a net importer of products /solutions in this segment. Based on
the data about the present situation and future prospects, it is proposed that it might be better to
offer relatively more support to Geomembranes, Geotextile tubes and Geomats for the export
markets. The support to upscaling of production of Geotextiles, Geocomposites, Geonets,
Geogrids and Geostrips should be extended so that India becomes self-reliant for its needs.
v. Hometech: The data suggests that it may be better to extend relatively more support to the
production of Fibre Fill (Polyester Staple Fibre) and Carpet Backing Cloth to enhance India’s
exports. The production of Plush Fabric for stuffed toys, Ticking Fabric for mattresses and Filter
Fabric must be enhanced to avoid dependence on imports.
vi. Indutech: The consumption of Indutech products in India exceeds the production (estimated
value at Rs. 11,489 Crores in 2019-20). India is a net importer of Indutech and is likely to remain
so till 2024-25 except that the trade deficit percentage is expected to reduce during this period.
Greater emphasis needs to be placed on rapid import substitution by backing the enhancement of
textile inputs that go into the making of Cigarette Filter Rods, AGM glass battery separators,
Coated Abrasives, Industrial filtration products, Industrial webbings and slings and Glass Fabric
(as part of Composites). The export opportunities for Belting fabric and Ropes and cordages need
to be exploited by offering export incentives or concessions to their manufacturers.
vii. Meditech: Indian manufacturers have been able to establish their presence in export markets for
Surgical and Non-Surgical masks, gloves, PPE kits and other surgical disposables. Disposable
linens and Surgical dressings are the other two product categories which should be supported to
produce globally acceptable products for export markets. The import reliance on textile inputs
required for sanitary napkins, baby diapers, compression stockings and garments, surgical
sutures and special dressings needs to be reduced by providing incentives and support to their
manufacturers from the government.
viii. Mobiltech: The consumption of Mobiltech products in India exceeds their production (estimated
value Rs. 7,669 Crores in 2019-20) and despite the percentage trade gap likely to become
smaller, India will continue to remain a net importer of Mobiltech products for the next five years.
However, the rapid expected growth in mobility market will attract significant capacity addition in
_______________________________________________________________________________________________

___________________________________________________________________________________________________
India’s domestic Mobiltech industry. It is suggested that based on the current capabilities of
Indian manufacturers, the export markets for Tyre Cord Fabric and Automotive carpets should be
exploited. The dependence on imports for textile component of Airbags, Helmets and Seat belt
webbing should be reduced by offering support to their indigenous manufacturers.
ix. Packtech: The exports of FIBC (Jumbo) Bags and Leno Bags need to be backed up by
encouraging continuous investment in product improvement for global markets. Jute Hessian and
Synthetic Sacks, Polyolefin Woven Sacks and Treated/ Coated Wrapping Fabric may need support
for meeting domestic consumption needs.
x. Protech: Current value of production (Rs. 2,850 Crores in 2019-20) of Protech products in India is
lower than their consumption (Rs. 3,148 Crores in 2019-20). At present, India has to import its
requirement of Protech items and even though India will reduce its trade gap significantly, it will
continue to remain a net importer of Protech items till 2024-25. Government of India has been
according a high priority to encourage defence related production industries for strategic reasons.
The aim is to ensure that India must not only reduce its dependence on imports but must also
become an exporter of defence products. It is suggested that the units which expand production
of Bullet Proof Jackets, High Visibility Clothing, Fire retardant apparel should be given a higher
support.
xi. Sportech: The value of domestic production of Sportech items in 2019-20 is estimated at Rs.
7,226 Crores which is a little lower than the value of domestic consumption. However, the
deficit is likely to increase in the coming years due to increase in popularity of sports and games
among the youth. The increased focus should be accorded to enhancing the production
capabilities of High performance swimwear and sportswear, Parachute Fabric and Sports
Footwear Components. The need for imports of Technical textiles elements in Sports
Composites should be reduced by removing the bottlenecks that impede enhancement of its
production capacity in the country.
MoT must consider offering special incentives which encourage Indian manufacturers and exporters of
the items identified as above.
12. Channelise finances from public and private sources to support upgradation of R&D
ecosystem so as to improve innovation opportunities within India: The government has
decided to allow corporate India to use their mandatory corporate social responsibility (CSR) spending
for investments in publicly-funded incubators and contribute to research efforts in science, technology,
medicine and engineering at major institutions and bodies. MoT must provide a dedicated forum for
interaction between the business organisations which are mandated to spend CSR funds annually and
R&D organisations like CoEs, TRAs, FIBCs and engineering and technology institutions. The aim and
therefore design of the forum should be such that it is able to help channelise CSR funds to R&D
institutions for viable and relevant project proposals of research & development in the field of
technical textiles.
13. Financially support and incentivise 'Continuous Learning' initiatives in private and
government sectors to attract, nurture and retain the right talent in the technical textile
industry from technical to managerial levels: MoT must offer a scheme to financially support
_______________________________________________________________________________________________

___________________________________________________________________________________________________
(through scholarships, contribution to fees) in part or in full the training and education of working
professionals at all levels of technical textile industry. MoT must support establishment of a credible
screening mechanism and invite applications from such professionals which must be duly screened
for its correctness and merits by using the mechanism established for the purpose. The
recommended cases must be assessed by the MoT and financial assistance provided in accordance
with the Ministry’s assessment.
29.4 Specific recommendations to promote

growth of technical textiles industry in India
29.4.1 Technological necessities
1. Increase domestic manufacturing of High Performance Fibres: Industry experts believe that the
demand for High performance fibres such as aramids, UHMWPE, carbon, Nylon 66 etc. is going to
increase at a fast rate in future. In order to make Indian industry ready for the coming surge in
demand, MoT must formulate new schemes/packages so that domestic manufacturers can be
incentivised to set-up or expand capacity for producing High Performance Fibres. Multinational
Companies who are producers of High Performance Fibres should be identified and invited to invest in
establishing production facilities in India through any of the alternative investment routes that may be
preferred by the MNCs without compromising the economic interests of India.
2. Encourage adoption and penetration of new technologies for a sustainable future: Industry
experts suggest that MoT must consider directing the prevailing Technology Upgradation Fund Scheme
(TUFS) towards certain identified modern technologies such as those related to 3D nonwovens,
multiaxial braiding, 3D weaving, warp knitted spacer etc. It is these identified technologies that should
be encouraged for adoption and penetration.
3. Encourage domestic production of Smart textiles and electronic textiles: With the
advancement of Artificial Intelligence and digital metrology, there has emerged an increasing demand
for smart and electronic textile products and ever new product introductions in the market. As this area
is going to be very vibrant in the near future, immediate interdisciplinary research initiatives are needed
in this area. The trend is likely to accentuate further and in order to have India acquire a prominent
space in this market, Ministry of Textiles, Ministry of Electronics and Information Technology and
Ministry of Science and Technology must work collaboratively and support interdisciplinary application
research and product development projects in the field of smart and electronic textiles.
29.4.2 Business necessities

Establish adequate testing facilities: The expected increase in the production and use of technical textile
products is likely to increase the volume of tests being carried out. The country-wide testing capacity needs to
be expanded to ensure that testing bottlenecks do not hamper the growth of the technical textile industry. It
_______________________________________________________________________________________________

___________________________________________________________________________________________________
is suggested that MoT must take steps to support organisations to establish dedicated test centres for
exclusive testing of technical textile material and products with proper infrastructure and a trained workforce.
Launch increased efforts to change the current inverted duty structure: The Ministry of Textiles must intensify
its efforts with the Ministry of Finance to rationalise the duty structure and remove the duty inversion so that
domestic manufacturing of technical textile products becomes more attractive than importing them.
Support and facilitate international exposure: The Ministry of Textiles must consider enhancing its existing
level of support to finance participation in trade shows, exhibitions, workshops, conferences so that
entrepreneurs and professionals can develop networks, keep themselves updated about latest developments
and make use of the business opportunities.
29.4.3 Necessity of Standards

Expedite the process of development of standards and their adoption: All the
institutions/organisations involved with formulation and development of standards are recommended to
develop and expand globally-aligned standards rapidly with the help from all the stakeholders. MoT must
facilitate the collaborative working of all the stakeholders to promote the adoption of the new standards.
29.4.4 Necessity of Research, Education and Skill development

1. Strengthen the educational institutes: It is recommended that the Government of India must identify
3-4 textile engineering/technology institutes from across the country and focus on providing support for
strengthening the technical textile education system and infrastructure for these identified institutes. Each of
these identified institutions can focus and specialise in 2-3 segments of technical textiles.
2. Establish department/centre of technical textiles in one of the new IITs: IIT Delhi is the only IIT
in the country that has a Department of Textiles. This is wholly inadequate. It is recommended that MoT
should consider supporting the establishment of a centre of technical textiles in one of the newer IITs. This
centre should be developed to function as a hub of latest knowledge exclusively for technical textiles.
3. Support and promote faculty development in the area of technical textiles: The knowledge of
existing members of the teaching faculty has not been adequately updated regarding technical textiles.
Therefore, a focused initiative is required for faculty development in the emerging areas as well as
technical textiles in general. It is suggested that the efforts for faculty development should be multiplied
and MoT and Ministry of Education must work jointly to promote and support faculty development in the
area of technical textiles.
4. Support development and introduction of new courses pertaining to technical textiles: The
technology and engineering institutes/colleges must be encouraged and if necessary supported by
Ministry of Education and MoT to develop and launch more specialized courses in important areas of
technical textiles (medical textiles, protective textiles, geotextiles, industrial textiles, automotive and
filtration textiles, textile reinforced composites etc.) for the undergraduate and postgraduate students.
The structure of these courses should be a healthy blend of theories and applications.
_______________________________________________________________________________________________

___________________________________________________________________________________________________
29.4.5 Necessity of Textile Research Associations (TRAs) and Centres

of Excellence (COEs)
1. Attract and retain talent in the TRAs: It is recommended that improvement in effectiveness of TRAs
should be achieved by ensuring that TRAs attract and retain high quality talent. This can be done by
adopting a model of human resource deployment and compensation that is comparable to government
institutions performing similar activities.
2. Augment the research infrastructure of the TRAs: The field of technical textiles is undergoing
changes at such a rapid pace that it makes it necessary for institutions such as TRAs to plan a continuous
investment in augmentation of R&D facilities. Therefore, it is suggested that MoT facilitates an advisory
group that must periodically review the global developments in the field of technical textiles and the
research and testing infrastructure in TRAs should be augmented based on the periodic suggestions of
the advisory group.
3. Strengthen the COEs: It is suggested that MoT must support and encourage collaboration among
Indian CoEs and well-reputed overseas COEs as well as industries. This can improve the research
outcomes and inter-disciplinary collaboration in several emerging areas of technical textiles. The COEs
are concentrated in the western part of India. This geographical concentration needs to be remedied so
that the industry has easy access to adequate testing facilities in relatively close proximity.
_______________________________________________________________________________________________

ANNEXURES
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Annexure 1
List of 207 HSN Codes notified by the Ministry of Textiles and proposed
classification by IIT Delhi
Segment
S. ITC-HS suggested Segment reclassification
Description
No Code by IIT done by IIT Delhi
Delhi
1 56075010 Nylon fish net twine Agrotech No
2 56081110 Made up fishing nets: of nylon Agrotech No
3 56081190 Made up fishing nets: other than nylon Agrotech No
Yes, Sportech as per
4 63061200 Tarpaulins, awnings and sunblindsetc.: of synthetic fibres Buildtech
Ministry of Textiles
5 63061920 Coir blinds/awnings Buildtech
6 63062200 Tents: of synthetic fibres Buildtech
7 63062910 Tents of jute Buildtech
Yes, Hometech as per
8 59050010 Textile wall coverings: fixed on the backing of any material Buildtech
9 59050090 Textile wall coverings: other Buildtech
10 63061910 Jute tarpaulins (incl. Dwtarpauline) Buildtech
Woven fabrics of synthetic filament yarn, including woven
Yes, Indutech as per
11 54071095 fabrics obtained from materials of healding 5404: other: Clothtech
bleached: other nylon and polyamide fabrics of filament yarn
12 54074113 fabrics obtained from materials of healding 5404 other: Clothtech
bleached: other nylon and polyamide fabrics of filament yarn
fabrics obtained from materials of heading 5404: other woven Yes, Indutech as per
13 54074123 Clothtech
fabrics, containing 85% or more by weight of filaments of nylon Ministry of Textiles
or other polyamides: bleached : nylon tafetta
Other woven fabrics, containing 85% or more by weight of Yes, Indutech as per
filaments of nylon or other polyamides: dyed: nylon tafetta Ministry of Textiles
Other woven fabrics, containing 85% or more by weight of Yes, Indutech as per
filaments of nylon or other polyamides: printed: nylon tafetta Ministry of Textiles
Woven fabrics containing more than 85% or more by weight of
16 54082215 artificial filament or strip or the like: dyed woven fabrics of Clothtech
rayon: rayon taffeta
Woven fabrics containing more than 85% or more by weight of
17 54082415 artificial filament or strip or the like: printed: woven fabrics of Clothtech
rayon taffeta
18 54083213 Dyed: rayon tafetta Clothtech
19 54083415 Printed: rayon tafetta Clothtech
Woven fabrics of synthetic staple fibres, containing 85% or Yes, Indutech as per
more by weight Ministry of Textiles
Yes, Meditech as per
21 56012190 Wadding; other articles of cotton wadding: other Clothtech
Wadding of textile materials and articles thereof; textile fibres,
22 56012200 not exceeding 5 mm in length (flock), textile dust and mill Clothtech
neps: wadding of man-made fibres
23 56012900 Wadding; other articles of man-made fibres wadding: other Clothtech
Other narrow woven fabrics containing by weight 5% or more Yes, Indutech as per
of elastomeric yarn/ rubber thread Ministry of Textiles
25 53110015 Woven fabrics of other vegetable textile fibres; woven fabrics Geotech No
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
of paper yarn : of coir including log form and geotextiles

Floor coverings of plastics, whether or not self-adhesive, in rolls
or in the form of tiles; wall or ceiling covering of plastics, as
26 39181010 defined in note 9 to this chapter: of polymers of vinyl chloride: Hometech No
wall or ceiling coverings combined with knitted or woven
fabrics, nonwovens or felts
Floor coverings of plastics, whether or not self-adhesive, in rolls
or in the form of tiles; wall or ceiling covering of plastics, as
27 39189020 defined in note 9 to this chapter: of other plastics : wall or Hometech No
ceiling coverings combined with knitted or woven fabrics,
nonwovens or felts
Carpets and other textile floor coverings, knotted, whether or
28 57019020 Hometech No
not made up: of coir including geo textile
Carpets and other textile floor coverings, tufted, whether or not
made up: of nylon or other polyamides: other
Other carpets and other textile floor coverings, whether or not
30 57050090 made up: other carpets and other textile floor coverings, Hometech No
whether or not made up: other
Of other textile materials: pile fabrics and chenille fabrics not Yes, Clothtech as per
31 58019090 Hometech
elsewhere specified or included Ministry of Textiles
32 59041000 Linoleums Hometech No
33 59049010 Floor covering with jute base Hometech No
34 59049090 Other floor covering Hometech No
Fabrics covered partially or fully with textile flocks, or with
35 59070011 preparation containing textile flocks: on the base fabrics of Hometech No
cotton
36 59070012 preparation containing textile flocks: on the base fabrics of Hometech No
man-made textile material
37 59070019 preparation containing textile flocks: on base fabrics of other Hometech No
textile materials
Mattress supports; articles of bedding and similar furnishing
38 94043010 (for example, mattresses, quilts, eiderdowns, cushions, pouffes Hometech No
and pillows) filled with feathers or down
Other mattress supports; articles of bedding and similar
39 94043090 furnishing (for example, mattresses, quilts, eiderdowns, Hometech No
cushions, pouffes and pillows)
Unbleached: containing 100% by weight of jute: carpet backing
fabrics
41 53101014 Unbleached: containing 100% by weight of jute: jute canvas Hometech No
42 59011020 Prepared painting canvas Hometech No
Textile fabrics with poly (vinyl chloride): imitation leather Yes, Indutech as per
fabrics of cotton Ministry of Textiles
Imitation leather cloth of cotton laminated plated, coated, etc. Yes, Indutech as per
with polyurethane Ministry of Textiles
Other fabrics impregnated laminated plated and coated with Yes, Indutech as per
polyurethane Ministry of Textiles
Textile fabrics, impregnated, coated, covered or laminated with Yes, Indutech as per
plastics, other than those of heading 5902: of cotton Ministry of Textiles
Textile fabrics, impregnated, coated, covered or laminated with
47 59039020 plastics, other than those of heading 5902: polyethylene Hometech
laminated jute fabrics
Tubes, pipes and hoses, of vulcanised rubber other than hard
rubber, with or without their fittings (for example, joints,
elbows, flanges): reinforced or otherwise combined only with Yes, Meditech as per
48 40093100 Indutech
textile materials: without fittings: tubes, pipes and hoses of Ministry of Textiles
vulcanised rubber reinforced/otherwise combined only with
textile materials without fittings
Conveyor or transmission belts or belting of vulcanised rubber:
49 40101210 reinforced only with textile materials: where the rubber Indutech No
compound content is less than 25% by weight
Canvas (including duck) of carded/combed yarn, mixed mainly
50 52112020 Indutech No
or solely with man-made fibres, weighing more than 200 g/m2
Dyed: plain weave: canvas (including duck) of carded/ combed
51 52113120 yarn, mixed mainly or solely with man-made fibres, weighing Indutech No
more than 200 g/sqm
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Synthetic filament yarn (other than sewing thread), not put up

for retail sale: nylon tyre yarn
High tenacity yarn of nylon or other polymer (others) (less than
840 denier)
High tenacity yarn of nylon or other polyester (others and
textured yarns) 206
55 54026100 Multi folded or cabled of nylon or other polyamides Indutech No
High tenacity yarn of viscose rayon: viscose rayon tyre yarn -
1,233 decitex
High tenacity yarn of viscose rayon: viscose rayon tyre yarn -
1,833 decitex
Synthetic monofilament of 67 decitex or more and of which no
cross-sectional dimension exceeds 1mm; strip and the like (for
example, artificial straw) of synthetic textile materials of an
apparent width not exceeding 5 mm: other : other+c204
Felt, whether impregnated, coated, covered or laminated:
needle loom felt & stitch-bonded fibre fabrics
Felt, whether impregnated, coated, covered or laminated:
needle loom felt & stitch-bonded fibre fabrics
Other felt not impregnated, coated, covered or laminated of
61 56022910 other textile materials for machines other than cotton Indutech No
machinery
Other felt not impregnated, coated, covered or laminated: of
jute (including blended/union jute) not for machinery
Felt, whether impregnated, coated, covered or laminated of
other
64 56029090 Felt, whether impregnated, coated, covered or laminated: other Indutech
Nonwovens of man-made filaments: weighing not more than 25
g/sqm
Nonwovens of man-made filaments: weighing more than 150
g/sqm
67 56039100 Nonwovens other: weighing not more than 25 g/sqm Indutech No
68 56039200 Nonwovens other: weighing between 25 g/sqm and 70 g/sqm Indutech No
69 56039300 Nonwovens other: weighing between 70 g/sqm and 150 g/sqm Indutech No
70 56039400 Nonwovens other: weighing more than 150 g/sqm Indutech No
71 56041000 Rubber thread and cord, textile covered Indutech No
Other textile yarn and strip, impregnated coated or covered or
sheathed with rubber or plastics
73 56074900 Other cordage etc.: of polyethylene/ polypropylene Indutech No
74 56075020 Nylon tyre cord Indutech No
75 56075030 Viscose tyre cord Indutech No
76 56075040 Nylon rope Indutech No
Twine, cordage, ropes and cables of other synthetic fibres:
other
78 56079010 Coir, cordage and ropes: other than cotton Indutech No
79 56079020 Cordage, cable ropes and twine: of cotton Indutech No
80 56079090 Twine, cordage, rope & cables: other Indutech No
Other knotted netting of twine, cordage or rope: of man-made
textile materials
82 56089010 Other twine, cordage/ rope etc.: of cotton Indutech No
83 56089020 Other twine, cordage/rope etc.: of jute Indutech No
84 56089090 Other knotted twine, cordage/ rope nets: other Indutech No
Articles of yarn, strip or the like of heading 5404 or 5405,
twine, cordage, rope or cables, not elsewhere specified or
85 56090090 included: articles of yarn, strip or the like of heading 5404 or Indutech No
5405, twine, cordage, rope or cables, not elsewhere specified
or included: other
86 58063110 Type writer ribbon cloth: of cotton: woven Indutech No
87 58063200 Narrow woven fabrics of man-made fibres Indutech No
88 58063910 Woven narrow goat hair puttis tape Indutech No
89 58063920 Woven narrow jute webbing Indutech No
Other fabrics impregnated, laminated plated and coated with
PVC
91 59039090 Other fabric plated laminated coated impregnated with other Indutech No
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
plastics
92 59069110 Rubberised textile fabrics other: knitted or crocheted: of cotton Indutech No
Rubberised textile fabrics other: knitted or crocheted: of other
textile materials
Rubberised textile fabrics, other than those of heading 5902, of
other: insulating tape, electrical of cotton
Rubberised textile fabrics other: rubberised cotton fabrics,
other than knitted or crocheted
Rubberised textile fabrics, other than those of heading 5902: of
other
Cotton fabrics coated or impregnated with oil or preparations
with basis of drying oil
98 59070092 Other fabrics coated or impregnated with oil or preparations Indutech No
Jute fabrics otherwise impregnated or coated, with oil or
preparations
Other textile fabrics otherwise impregnated, coated or covered;
100 59070099 painted canvas being theatrical scenery, studio back-cloths or Indutech No
the like
101 59080010 Wicks & gas mantle fabrics etc. of cotton Indutech No
102 59080020 Gas mantles of rayon Indutech No
Textile wicks, woven, plaited or knitted, for lamps, stoves,
lighters, candles or the like; incandescent gas mantles and
tubular knitted gas mantle fabric therefor, whether or not
impregnated: others
Textile hose piping and similar textile tubing, with or without
lining, armour or accessories of other materials of cotton
lining, armour or accessories: of manmade fibre
lining, armour or accessories: of other textile materials
Cotton canvas ply belting whether impregnated, coated,
107 59100010 covered or laminated with plastics, or reinforced with metal or Indutech No
other material
Rubberised cotton belting whether impregnated, coated,
108 59100020 covered or laminated with plastics, or reinforced with metal or Indutech No
other material
Other transmission, conveyor or elevator belts or belting of
109 59100030 cotton whether impregnated, coated, covered or laminated with Indutech No
plastics, or reinforced with metal or other material
Hair belting whether impregnated, coated, covered or
110 59100040 laminated with plastics, or reinforced with metal or other Indutech No
material
Flax canvas ply belting whether impregnated, coated, covered
111 59100050 or laminated with plastics, or reinforced with metal or other Indutech No
material
Fibre belt conveyor whether impregnated, coated, covered or
112 59100060 laminated with plastics, or reinforced with metal or other Indutech No
material
Other transmission or conveyor belts or belting, of textile
113 59100090 material, whether impregnated, coated, covered or laminated Indutech No
with plastics, or reinforced with metal or other material
Textile fabrics, felt and felt-lined woven fabrics, coated,
covered or laminated with rubber, leather or other material, of
a kind used for card clothing, and similar fabrics of a kind used
for other technical purposes, including narrow fabrics made of
velvet impregnated with rubber, for covering weaving spindles
(weaving beams)
Bolting fabrics, whether made up textile fabrics and felts,
endless or fitted with linking devices, of a kind used in paper
making or similar machines (for example, for pulp or asbestos-
cement)
Textile products and articles, for technical uses, specified in
116 59113110 note 7 to chapter 59, weighing less than 650 g/sqm: felt for Indutech No
cotton textile industries, woven
Textile fabrics weighing less than 650 g/sqm: woven textiles
117 59113120 felt, whether impregnated or coated, of a kind commonly used Indutech No
in other machines
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Textile fabrics weighing less than 650 g/sqm: cotton fabrics

and articles used in machinery and plant
Textile fabrics weighing less than 650 g/sqm: jute fabrics &
articles used in machinery/plant
Textile fabrics weighing less than 650 g/sqm, of metalized yarn
of a kind commonly used in paper making or other machinery
121 59113190 Textile fabrics weighing less than 650 g/sqm: other Indutech No
Textile fabrics weighing 650 g/sqm or more: felt for cotton
textile industries, woven
Textile fabrics for technical uses weighing 650 g/m2 or more:
123 59113220 woven textiles felt, whether impregnated or coated, of a kind Indutech No
commonly used in other machines
Textile fabrics weighing 650 g/sqm or more: cotton fabrics &
articles used in machinery/plant
jute fabrics & articles used in machinery/plant
126 59113250 of metalized yarn of a kind commonly used in paper making or Indutech No
other machinery
127 59113290 Textile fabrics weighing 650 g/sqm or more: others Indutech No
Textile fabrics weighing 650 g/m2 or more: straining cloth of a
kind used in oil presses or the like, including that of human hair
129 59119010 Textile products for technical uses: paper maker's felt (woven) Indutech No
Textile products for technical uses: gaskets washers polishing
discs & other machinery parts of textile articles
131 59119090 Textile products for technical uses: others Indutech No
Knitted or crocheted fabrics of a width not exceeding 30 cm,
containing by weight 5% or more of elastomeric yarn or rubber
132 60024000 thread, other than those of heading 6001: containing by weight Indutech No
5% or more of elastomeric yarn but not containing rubber
thread
Knitted or crocheted fabrics of a width not exceeding 30 cm,
133 60029000 containing by weight 5% or more of elastomeric yarn or rubber Indutech No
thread, other than those of heading 6001: other
Warp knit fabrics (including those made on gallon knitting
134 60059000 machines), other than those of heading 6001 to 6004of Indutech No
artificial fibres: other
Natural or artificial abrasive powder or grain, on a base of
textile material, of paper, of paperboard or other materials,
whether or not cut to shape or sewn or otherwise made up: on
a base of woven textile fabric only: abrasive cloth
Articles of asphalt or of similar material ( for example,
petroleum bitumen or coal tar pitch) : in rolls: tarfelt roofing
Glass fibres (including glass wool): chopped strands of a length
not more than 50 mm
138 70191200 Glass fibres (including glass wool): rovings Indutech No
139 70191900 Glass fibres (including glass wool): other (silvers, yarn) Indutech No
140 70193100 Glass fibres (including glass wool): glass mats Indutech No
141 70193200 Glass fibres (including glass wool): glass thin sheets (voils) Indutech No
Glass fibres (including glass wool): other (webs mattresses
boards etc)
143 70194000 Glass fibres (including glass wool): woven fabrics of rovings Indutech No
Glass fibres (including glass wool) woven fabrics (excluding
rovings) of a width not more than 30 cm
Glass fibres (including glass wool) woven fabrics (excluding
rovings) of a width more than 30 cm plain weave, weighing
less than 250 g/sqm, of filaments measuring per single yarn
not more than 136 tex
146 70195900 Other woven fabrics of glass Indutech No
147 70199090 Other made-up articles of glass fibres (fibre glass) Indutech No
148 96121010 Computer printer ribbon Indutech No
Panty hose, tights, stockings, socks and other hosiery, including
graduated compression hosiery (for example, stockings for
Yes, Clothtech as per
149 61151000 varicose veins) and footwear without applied soles, knitted or Meditech
crocheted: graduated compression hosiery (for example,
stockings for varicose veins)
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Panty hose, tights, stockings, socks and other hosiery, including

graduated compression hosiery (for example, stockings for
Yes, Clothtech as per
150 61152990 varicose veins) and footwear without applied soles, knitted or Meditech
crocheted: of other textile materials: panty hose and tights of
other fibres
151 30051010 Adhesive gauze bandage Meditech No
152 30051020 Adhesive tape (medicinal) Meditech No
153 30059010 Cotton wool, medicated Meditech No
154 30059030 Medicated lint Meditech No
155 30059040 Bandages without adhesive layer Meditech No
156 30059050 Burn therapy dressing soaked in protective gel Meditech No
Textile materials and articles thereof; textile fibres, not
exceeding 5 mm in length (flock), textile dust and mill neps:
157 56012110 Meditech No
wadding; other articles of cotton wadding: absorbent cotton
wool
158 59061000 Adhesive tape of a width not exceeding 20 cm Meditech No
159 96190010 Sanitary towels (pads) or sanitary napkins Meditech No
Sanitary towels (pads) and tampons, napkins and napkin liners
for babies and similar articles, of any material: tampons
161 96190030 for babies and similar articles, of any material: napkins and Meditech No
napkin liners for babies
162 96190040 Clinical diapers Meditech No
for babies and similar articles, of any material: other
Tyre cord fabric of high tenacity yarn of nylon or other Yes, Indutech as per
164 59021010 Mobiltech
polyamides: impregnated with rubber Ministry of Textiles
165 59021090 Tyre cord fabric of nylon or other polyamides: others Mobiltech
166 59022010 Tyre cord fabric of polyester: impregnated with rubber Mobiltech
167 59022090 Tyre cord fabric of polyesters: others Mobiltech
168 59029010 Tyre cord fabric of others: impregnated with rubber Mobiltech
Tyre cord fabric of high tenacity yarn of nylon or other Yes, Indutech as per
polyamides, polyesters or viscose rayon: others Ministry of Textiles
Parts and accessories of the motor vehicles of headings 8701 to
170 87082100 8705: other parts and accessories of bodies (including cabs): Mobiltech
safety seat belts
Parts and accessories of the motor vehicles of headings 8701 to
171 87089500 8705: other parts and accessories: safety airbags with inflater Mobiltech
system; parts thereof
172 53101012 Unbleached: containing 100% by weight of jute: sacking fabrics Packtech
173 53101013 Unbleached: containing 100% by weight of jute: hessian fabrics Packtech
Nonwovens of man-made filaments: weighing more than g/sqm Yes, Indutech as per
174 56031200 Packtech
but not more than 70 g/sqm Ministry of Textiles
Nonwovens of man-made filaments: weighing more than 70 Yes, Indutech as per
175 56031300 Packtech
g/sqm but not more than 150 g/sqm Ministry of Textiles
176 56074100 Binder/baler twine: of polyethylene/ polypropylene Packtech
Sacks and bags, flexible intermediate bulk containers: of man-
177 63053200 Packtech No
made textile materials
Gloves, mittens and mitts, knitted or crocheted impregnated,
178 61161000 Protech No
coated or covered with plastics or rubber
Outer garments for men's or boys' overcoats, car-coats, capes,
cloaks, anoraks, windcheaters, wind jackets and similar articles
179 62102010 Protech No
other than those of heading 6202 not knitted or crocheted: of
rubberized textile fabrics
Outer garments for men's or boys' overcoats, car-coats, capes,
cloaks, anoraks, wind-cheaters, wind jackets and similar articles
180 62102020 other than those of heading 6202, not knitted or crocheted: of Protech No
fabrics impregnated, coated, covered or laminated with
preparations of cellulose derivatives and other artificial plastic
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
materials
Outer garments, men’s & boys' overcoats, car-coats, capes,
cloaks, anoraks, wind-cheaters, wind jackets and similar articles
181 62102030 Protech No
other than those of heading 6202, not knitted or crocheted: of
textile fabrics, otherwise impregnated or coated
Other outer garments for women or girls, overcoats, car-coats,
capes, cloaks, anoraks, wind cheaters, not knitted or crocheted:
182 62103010 of textiles impregnated, coated, covered or laminated with Protech No
preparation of cellulose derivatives and other artificial plastic
materials
Outer garments, men or boys' of rubberised textile fabrics not
183 62103020 Protech No
knitted or crocheted
Men's or boys' personal protective garments, not knitted or
184 62104010 Protech No
crocheted: bullet proof jackets, bomb disposal jackets etc.
Other men's or boys' personal protective garments not knitted
185 62104090 Protech No
or crocheted
Personal protective garments for women & girl's not knitted or
186 62105000 Protech No
crocheted
187 54071014 Unbleached umbrella cloth panel fabrics Protech
188 54071024 Bleached umbrella cloth panel fabrics Protech
189 54071034 Dyed umbrella cloth panel fabrics Protech
190 54071044 Printed umbrella cloth panel fabrics Protech
191 54071094 Other umbrella cloth panel fabrics Protech
192 63072010 Life jackets and life belts of cotton Protech
193 63072090 Life jackets & life belts excluding cotton Protech
194 54071011 Unbleached parachute fabrics Sportech No
195 54071012 Unbleached tent fabrics Sportech No
196 54071021 Bleached parachute fabrics Sportech No
197 54071022 Bleached tent fabrics Sportech No
198 54071031 Dyed parachute fabrics Sportech No
199 54071032 Dyed tent fabrics Sportech No
200 54071041 Printed parachute fabrics Sportech No
201 54071042 Printed tent fabrics Sportech No
202 54071091 Other parachute fabrics Sportech No
203 54071092 Other tent fabrics Sportech No
204 62112000 Ski-suits Sportech No
Other tarpaulins, awnings and sunblinds; tents; sails for boats,
205 63061990 Sportech No
sailboards or landcraft; camping goods
206 63063000 Sails Sportech No
207 95069960 Sports nets Sportech No
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Annexure 2
List of additional 242 ITC HS Codes proposed by IIT Delhi for inclusion as
codes for Technical Textile items
Segment
ITC
Sl. No Description suggested by
Codes
IIT Delhi
1 54071019 Agrotech
polyesters: unbleached: other polyester fabrics
Wallpaper and similar wall coverings, consisting of paper coated or covered, on the
2 48142000 face side, with a grained, embossed, coloured, design-printed or otherwise decorated Buildtech
layer of plastics
3 49111010 Trade advertising material, commercial catalogues and the like: posters, printed Buildtech
4 49111090 Trade advertising material, commercial catalogues, and the like: other Buildtech
Cotton sewing thread, whether put up for retail sale: not put up for retail sale:
5 52041110 containing 85% or more by weight of cotton: cotton thread, sewing, containing any Clothtech
synthetic staple fibre
containing 85% or more by weight of cotton: embroidery cotton thread
7 52041140 containing 85% or more by weight of cotton: cotton sewing thread not containing any Clothtech
synthetic staple fibre
containing 85% or more by weight of cotton: other
Cotton sewing thread, whether put up for retail sale: not put up for retail sale: other
(excluding product containing 85% or more by weight of cotton)
Cotton sewing thread, whether put up for retail sale: put up for retail sale: cotton
thread, sewing, containing any synthetic staple fibre
thread, darning
Cotton sewing thread, whether put up for retail sale: put up for retail sale: embroidery
cotton thread
sewing thread, not containing any synthetic staple fibre
14 52042090 Cotton sewing thread, whether put up for retail sale: put up for retail sale: other Clothtech
Sewing thread of man-made filaments, whether put up for retail sale: of synthetic
filaments
Sewing thread of man-made filaments, whether put up for retail sale: of artificial
filaments
Synthetic filament yarn (other than sewing thread), not put up for retail sale,
including synthetic monofilament of less than 67 decitex: textured yarn: of polyesters
Synthetic filament yarn (other than sewing thread), not put up for retail sale,
18 54023990 including synthetic monofilament of less than 67 decitex: other: other (excluding Clothtech
product of polypropylene and acrylic filament yarn)
Other woven fabrics, containing 85% or more by weight of textured polyester
filaments: dyed:other
Other woven fabrics, containing 85% or more by weight of textured polyester
filaments: of yarns of different colours
21 54076900 Other woven fabrics, containing 85% or more by weight of polyester filaments: other Clothtech
22 54077200 Other woven fabrics, containing 85% or more by weight of synthetic filaments: dyed Clothtech
Other woven fabrics, containing 85% or more by weight of synthetic filaments:
printed
Other woven fabrics, containing less than 85% by weight of synthetic filaments,
mixed mainly or solely with cotton: dyed: other
Other woven fabrics, containing less than 85% by weight of synthetic filaments,
25 54079110 mixed mainly or solely with cotton: other than nylon and polyester: unbleached woven Clothtech
fabric
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Woven fabrics of synthetic staple fibres, containing less than 85% by weight of such
26 55132300 fibres, mixed mainly or solely with cotton, of a weight not exceeding 170g/m2: dyed: Clothtech
other woven fabrics of polyester staple fibres
Woven fabrics of artificial staple fibres: containing less than 85% by weight of artificial
27 55162300 staple fibres, mixed mainly or solely with manmade filaments: of yarns of different Clothtech
colours
Woven pile fabrics and chenille fabrics, other than fabrics of heading 5802 or 5806:
cut corduroy: other than cotton
Woven pile fabrics and chenille fabrics, other than fabrics of heading 5802 or 5806:
chenille fabrics: other than carduroys
Tulles and other net fabrics, not including woven, knitted or crocheted fabrics; lace in
30 58041090 the piece, in strips or in motifs, other than fabrics of heading 6002 to 6006: tulles and Clothtech
other net fabrics: other than cotton
Labels, badges and similar articles of textile materials, in the piece, in strips or cut to
shape or size not embroidered: woven: of cotton
shape or size not embroidered: woven: of man-made fibre
shape or size not embroidered: woven: other
shape or size not embroidered: other: felt or non-woven
shape or size not embroidered: other: other
Braids in the piece; ornamental trimmings in the piece, without embroidery, other
36 58081090 than knitted or crocheted; tassels, pompons and similar articles: braids, in the piece: Clothtech
other than cotton
37 58089010 than knitted or crocheted; tassels, pompons and similar articles: other: tapes, Clothtech
ornamental or cotton
38 58089040 than knitted or crocheted; tassels, pompons and similar articles: other: ribbons of Clothtech
rayon with ornamental trimmings
than knitted or crocheted; tassels, pompons and similar articles: other: other
Woven fabrics of metal thread and woven fabrics of metallised yarn of heading 56 05,
40 58090090 of a kind used in apparel, as furnishing fabrics or for similar purposes, not elsewhere Clothtech
specified or included: other than zari borders
41 60012200 Looped pile fabrics: of man-made fibres Clothtech
Other made-up clothing accessories; parts of garments or of clothing accessories,
other than those of heading 6212: parts: other
Other made-up articles, including dress patterns: other (excluding floor-cloths, dish-
cloths, dusters and similar cleaning cloths and life jackets and life-belt): other
Buttons, press-fasteners, snap-fasteners and press-studs, button moulds and other
parts of these articles; button blanks: other: other
45 96071190 Slide fasteners: fitted with chain scoops of base metal: other than zip fasteners Clothtech
46 96071910 Slide fasteners: other than fitted with chain scoops of base metal: zip fasteners Clothtech
Slide fasteners: other than fitted with chain scoops of base metal: other than zip
fasteners
48 96072000 Slide fasteners and parts thereof: parts Clothtech
49 38244090 Geotech
products), not elsewhere specified or included: prepared additives for cements,
mortars or concretes: other
Woven fabrics of jute or of other textile base fibres of heading 5303: other: other
50 53109099 Geotech
(excluding product of bleached, dyed and printed)
Woven fabrics of other vegetable textile fibres: other (excluding product of
51 53110019 Geotech
unbleached, bleached, dyed, printed and coir including log form and geotextiles)
Woven fabrics of paper yarn: other (excluding product of unbleached, bleached, dyed
52 53110029 Geotech
and printed)
53 39264059 Decorative sheets: other Hometech
54 48182000 Handkerchiefs, cleaning or facial tissues and towels Hometech
Toilet paper and similar paper, cellulose wadding or webs of cellulose fibres, of a kind
used for household or sanitary purposes, in rolls of a width not exceeding 36 cm, or
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
cut to size or shape; handkerchiefs, cleansing tissues, towels, table cloths, serviettes,
bed sheets and similar household, sanitary or hospital articles, articles of apparel and
clothing accessories, of paper pulp, paper, cellulose wadding or webs of cellulose
fibres: other (excluding toilet paper, handkerchiefs, cleaning or facial tissues and
towels, tablecloths and serviettes, articles of apparel and clothing accessories)
Woven fabrics of cotton, containing 85% or more by weight of cotton, weighing not
56 52083250 more than 200 g/m2: dyed plain weave, weighing more than 100 g/m2 : bed ticking, Hometech
domestic
57 52084140 more than 200 g/m2: of yarn of different colours: plain weave, weighing not more Hometech
than 100 g/m2 : bed ticking, domestic
58 52084250 more than 200 g/m2: of yarn of different colours: plain weave, weighing more than Hometech
100 g/m2: bed ticking, domestic
59 52084330 more than 200 g/m2: of yarn of different colours: 3-thread or 4-thread twill, including Hometech
cross twill: bed ticking, domestic
60 53050010 Coir bristles fibre Hometech
Coconut, abaca (manila hemp or musa textilis nee), ramie and other vegetable textile
fibres, not elsewhere specified or included, raw or processed but not spun; tow, noils
and waste of these fibres (including yarn waste and garneted stock): coir mattress
fibre
Coconut, abaca (manila hemp or musa textilis nee), ramie and other vegetable textile
fibres, not elsewhere specified or included, raw or processed but not spun; tow, noils
and waste of these fibres (including yarn waste and garneted stock): curled or
machine twisted coir fibre
63 54072010 Woven fabrics obtained from strip or the like: unbleached Hometech
64 54072090 Woven fabrics obtained from strip or the like: other Hometech
65 54073090 Fabrics specified in note 9 to section xi: other Hometech
Carpets and other textile floor coverings, knotted, whether made up: of wool or fine
animal hair
Carpets and other textile floor coverings, knotted, whether made up: of other textile
materials: other than cotton and coir
68 57022020 Floor coverings of coconut fibres (coir): coir carpets and other rugs Hometech
69 57023110 Other, of pile construction, not made up: of wool or fine animal hair: carpets Hometech
Other, of pile construction, not made up: of man-made textile material: carpets,
carpeting and rugs and the like
71 57024110 Other, of pile construction, made up: of wool or fine animal hair: carpets Hometech
72 57024290 Other, of pile construction, made up: of man-made textile materials: other Hometech
Carpets and other textile floor coverings, tufted, whether made up: of nylon or other
73 57032020 polyamides: 100% polyamide tufted velour, or cut pile loop pile carpet mats with jute, Hometech
rubber latex or PU foam backing
Carpets and other textile floor coverings, tufted, whether made up: of other man-
made textile materials: carpets, carpeting & rugs
Carpets and other textile floor coverings, tufted, whether made up: 100%
polypropylene carpet mats with jute, rubber, latex or PU foam backing
Carpets and other textile floor coverings, tufted, whether made up: of other man-
made textile materials: other
Carpets and other textile floor coverings, tufted, whether made up: of other textile
materials: other than cotton and coir
Woven pile fabrics (including terry towelling and similar terry fabrics) and chenille
fabrics
79 58110020 Quilted wadding Hometech
Quilted textile products in the piece, composed of one or more layers of textile
materials assembled with padding by stitching or otherwise
81 59019020 Varnished cambric fabrics (empire fabrics) tapes Hometech
Bed linen, table linen, toilet linen and kitchen linen: other bed linen, printed: man-
made fibres
83 63029900 Bed linen, table linen, toilet linen and kitchen linen: of other textile materials Hometech
Curtains (including drapes) and interior blinds: curtain or bed valances: knitted or
crocheted: of synthetic fibres
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Other furnishing articles, excluding those of heading 9404: not knitted or crocheted,
of cotton: mosquito nets
86 63049291 Other furnishing articles of handloom Hometech
87 63049300 Other furnishing articles of synthetic fibres, not knitted or crocheted Hometech
88 63071090 Floor-cloths, dish-cloths, dusters and similar cleaning cloths made of others- others Hometech
Festive, carnival or other entertainment articles, including conjuring tricks and novelty
jokes: articles for Christmas festivities
90 48114100 Gummed or adhesive paper and paperboard: self-adhesive Hometech
Narrow woven fabrics other than goods of heading 5807; narrow fabrics consisting of
91 58063120 warp without weft assembled by means of an adhesive (bolducs): of cotton: newar Hometech
cotton
Woven fabrics of combed wool or of combed fine animal hair: containing 85% or
92 51121990 more by weight of wool or of fine animal hair: of a weight not exceeding 200 g/m2: Hometech
other than of unbleached, bleached, dyed and printed
93 42050090 Other articles of leather or of composition leather: other than of leather sofa cover Indutech
94 39269010 PVC belt conveyor Indutech
Endless transmission belts of trapezoidal cross-section (v-belts), v-ribbed, of an
95 40103110 outside circumference exceeding 180 cm but not exceeding 240 cm: where the rubber Indutech
outside circumference exceeding 180 cm but not exceeding 240 cm: other
Endless transmission belts of trapezoidal cross-section (v-belts), other than v-ribbed,
97 40103210 of an outside circumference exceeding 60 cm but not exceeding 180 cm: where the Indutech
rubber compound content is less than 25% by weight
of an outside circumference exceeding 60 cm but not exceeding 180 cm: other
99 40103310 outside circumference exceeding 60 cm but not exceeding 180 cm: where the rubber Indutech
100 40103390 Indutech
outside circumference exceeding 60 cm but not exceeding 180 cm: other
101 40103410 of an outside circumference exceeding 180 cm but not exceeding 240 cm: where the Indutech
rubber compound content is less than 25% by weight
102 40103490 Indutech
of an outside circumference exceeding 180 cm but not exceeding 240 cm: other
Endless synchronous belts of an outside circumference exceeding 60 cm but not
103 40103510 Indutech
exceeding 150 cm: where the rubber compound content is less than 25% by weight
Endless synchronous belts of an outside circumference exceeding 60 cm but not
104 40103590 Indutech
exceeding 150 cm: other
105 48054000 Test liner (recycled liner board):filter paper and paperboard Indutech
106 48232000 Filter paper and paperboard Indutech
107 55031100 Synthetic staple fibres, not carded, combed or otherwise of aramids Indutech
Synthetic staple fibres, not carded, combed or otherwise processed for spinning: of
108 55032000 Indutech
polyesters
109 55121910 Containing 85% or more by weight of polyester staple fibres: dyed Indutech
110 56072100 Binder or baler twine of sisal or other textile fibres of the genus agave Indutech
Twine, cordage, ropes and cables, whether plaited or braided and whether
111 56072900 impregnated, coated, covered or sheathed with rubber or plastics: of sisal or other Indutech
textile fibres of the genus agave: other
112 58064000 Fabrics consisting of warp without weft assembled by means of an adhesive (bolducs) Indutech
Textile fabrics coated with gum or amylaceous substances, of a kind used for the
113 59011010 Indutech
outer covers of books or the like: of cotton
114 59011090 Indutech
outer covers of books or the like: other
outer covers of books or the like; tracing cloth; prepared painting canvas; buckram
115 59019010 Indutech
and similar stiffened textile fabrics of a kind used for hat foundations: other: tracing
cloth of cotton
116 59019090 Textile fabrics coated with gum or amylaceous substances, of a kind used for the Indutech
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
outer covers of books or the like; tracing cloth; prepared painting canvas; buckram
and similar stiffened textile fabrics of a kind used for hat foundations: other
(excluding outer cover of books and painting canvas): other (excluding tracing cloth of
cotton and varnished cambric fabrics (empire fabrics) tapes)
Natural or artificial abrasive powder or grain, on a base of textile material, of paper, of
117 68051090 paperboard or of other materials, whether or not cut to shape or sewn or otherwise Indutech
made up: on a base of woven textile fabric only: other
Glass fibres (including glass wool) and articles thereof (for example, yarn, woven
118 70199010 Indutech
fabrics): other: glass wool or glass fibre
119 84219900 Filtering or purifying machinery and apparatus, for liquids or gases: parts Indutech
Electric accumulators, including separators therefor, whether rectangular (including
120 85079010 Indutech
square): parts: accumulator cases made of hard rubber and separators
Electric accumulators, including separators therefor, whether rectangular (including
121 85079090 Indutech
square): parts: other
122 85340000 Printed circuits Indutech
123 40169100 Other articles of vulcanised rubber other than hard rubber: floor coverings and mats Indutech
Adhesive dressings and other articles having an adhesive layer: other than adhesive
124 30051090 Meditech
guaze and tape
125 30059060 Micro pores surgical tapes Meditech
Sterile surgical catgut, similar sterile suture materials (including sterile absorbable
126 30061010 Meditech
surgical or dental yarns) and sterile tissue adhesives for surgical wound closure
Sterile laminaria and sterile laminaria tents; sterile absorbable surgical or dental
127 30061020 Meditech
haemostatics; sterile surgical or dental adhesion barriers, whether absorbable
128 33062000 Yarn used to clean between the teeth (dental floss) Meditech
Articles of apparel and clothing accessories (including gloves, mittens and mitts) for all
129 40151100 purposes, or vulcanised rubber other than hard rubber: surgical gloves, mittens & Meditech
mitts
130 40159010 Meditech
purposes, or vulcanised rubber other than hard rubber: other: rubber apron
Toilet or facial tissue stock, towel or napkin stock and similar paper of a kind used for
household or sanitary purposes, cellulose wadding and webs of cellulose fibres,
131 48030010 whether or not creped, crinkled, embossed, perforated, surface-coloured, surface- Meditech
decorated or printed, in rolls or sheets: in commercial size rolls of width size 36 cm
and above
Artificial filament yarn (other than sewing thread), not put for retail sale, including
132 54031090 artificial mono filament of less than 67 decitex: high tenacity yarn of viscose rayon: Meditech
other
Synthetic monofilament of 67 decitex or more and of which no cross-sectional
dimension exceeds 1 mm; strip and the like (for example, artificial straw) of synthetic
133 54049010 Meditech
textile materials of an apparent width not exceeding 5 mm: other: catgut imitation of
synthetic yarn, non-sterile
134 90213100 Artificial joints Meditech
135 90213900 Other artificial parts of the body: other Meditech
Artificial filament yarn (other than sewing thread), not put for retail sale, including
artificial mono filament of less than 67 decitex: of cellulose acetate: other
137 56011000 Needleloom felt and stitch-bonded fibre fabrics Mobiltech
138 56029000 Felt, whether impregnated, coated, covered or laminated: other Mobiltech
Parts and accessories of the motor vehicles of headings 8701 to 8705: other parts and
accessories of bodies (including cabs): other
Parts and accessories of the motor vehicles of headings 8701 to 8705: other parts and
accessories: other
141 94011000 Seats of a kind used for aircraft Mobiltech
142 94012000 Seats of a kind used for motor vehicles Mobiltech
Seats (other than those of heading 9402), whether convertible into beds, and parts
thereof: other seats
Seats (other than those of heading 9402), whether convertible into beds, and parts
thereof: parts
polyesters: bleached: other
polyesters: dyed: other
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
With outer surface of leather or of composition leather: or of patent leather: travel

147 42021110 Packtech
goods (trunks, suit-cases, sports bags and other similar items) of leather
With outer surface of leather or of composition leather: or of patent leather: toilet-
148 42021120 Packtech
bags and cases, of leather
149 42021130 With outer surface of leather or of composition leather: or of patent leather: satchels Packtech
With outer surface of leather or of composition leather: or of patent leather: brief-
150 42021140 Packtech
cases
With outer surface of leather or of composition leather: or of patent leather:
151 42021150 Packtech
executive-cases
With outer surface of leather or of composition leather: or of patent leather: vanity-
152 42021160 Packtech
cases
153 42021190 With outer surface of leather or of composition leather: or of patent leather: other Packtech
154 42021210 With outer surface of plastic or of textile materials: toilet cases Packtech
155 42021220 With outer surface of plastic or of textile materials: plastic moulded suit-cases Packtech
156 42021230 With outer surface of plastic or of textile materials: plastic moulded brief-cases Packtech
157 42021240 With outer surface of plastic or of textile materials: satchels Packtech
158 42021250 With outer surface of plastic or of textile materials: other travel goods Packtech
159 42021260 With outer surface of plastic or of textile materials: brief-cases Packtech
160 42021280 Packtech
cases
Other: travel goods (trunks, suit-cases, sports bags, and other similar items ) of
162 42021910 Packtech
leather
163 42021920 Other: toilet-cases Packtech
164 42021930 Other: satchels Packtech
165 42021940 Other: brief-cases (other than plastic moulded) Packtech
166 42021960 Other: vanity-cases Packtech
Trunks, suit-cases, vanity-cases, executive-cases, brief-cases, school satchels and
167 42021990 Packtech
similar containers: other: other
With outer surface of leather or of composition leather: or of patent leather: hand-
168 42022110 Packtech
bags for ladies
169 42022120 Packtech
bags
With outer surface of sheeting of plastics or of textile materials: hand-bags and
171 42022210 Packtech
shopping bags, of artificial plastic material
172 42022220 Packtech
shopping bags, of cotton
173 42022230 Packtech
shopping bags, of jute
174 42022290 With outer surface of sheeting of plastics or of textile materials: other Packtech
Hand-bags, whether with shoulder strap, including those without handle: other: hand
175 42022910 Packtech
bags of other materials excluding wickerwork or basket work
176 42022990 Hand-bags, whether with shoulder strap, including those without handle: other: other Packtech
Articles of a kind normally carried in the pocket or in the handbag: with outer surface
177 42023110 Packtech
of leather or of composition leather: jewellery box
178 42023120 Packtech
of leather or of composition leather: wallets and purses, of leather
179 42023190 Packtech
of leather or of composition leather: other
180 42023290 Packtech
of sheeting of plastics or of textile materials: other than jewellery box
181 42029200 similar containers: other: with outer surface of sheeting of plastics or of textile Packtech
materials
182 42029900 Packtech
similar containers: other: other
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
183 58063190 warp without weft assembled by means of an adhesive (bolducs): other woven Packtech
fabrics: of cotton: other
184 58063930 warp without weft assembled by means of an adhesive (bolducs): of other textile Packtech
materials: other narrow fabrics of jute
185 58063990 warp without weft assembled by means of an adhesive (bolducs): of other textile Packtech
materials: other
186 63051010 Packtech
bastfibres of heading 5303:jute bagging for raw cotton
187 63051020 Packtech
bastfibres of heading 5303: jute corn (grains) sacks
188 63051030 Packtech
bastfibres of heading 5303: jute hessian bags
189 63051040 Packtech
bastfibres of heading 5303: jute sacking bags
190 63051050 Packtech
bastfibres of heading 5303: jute wool sacks
191 63051060 bastfibres of heading 5303: plastic coated or paper cum polythene lined jute bags and Packtech
sacks
192 63051070 Packtech
bastfibres of heading 5303: paper laminated hessian jute
193 63051080 Packtech
bastfibres of heading 5303: jute soil savers
194 63051090 Packtech
bastfibres of heading 5303: other (excluding all types of jute bags)
195 63052000 Sacks and bags, of a kind used for the packing of goods: of cotton Packtech
Sacks and bags, of a kind used for the packing of goods: of man-made textile
196 63053300 Packtech
materials: other, of polyethylene or polypropylene strip or the like
Sacks and bags, of a kind used for the packing of goods: of man-made textile
197 63053900 Packtech
materials: other
198 63059000 Sacks and bags, of a kind used for the packing of goods: of other textile materials Packtech
199 63062990 Sacks and bags, of a kind used for the packing of goods: of other textile materials Packtech
Articles of apparel and clothing accessories (including gloves, mittens and mitts):
200 39262029 Protech
aprons: other than of polyurethane foam
201 40159030 Protech
purposes, or vulcanised rubber other than hard rubber: other: industrial gloves
Overcoats, raincoats, car-coats, capes, cloaks and similar articles: of wool and fine
202 62011100 Protech
animal hair
Men’s or boys' overcoats, raincoats, car-coats, capes, cloaks and similar articles: of
203 62011290 Protech
cotton: other than raincoats
Men’s or boys' overcoats, raincoats, car-coats, capes, cloaks and similar articles: of
204 62011310 Protech
man-made fibres: raincoats
Men's or boys' overcoats, carcoats, cloaks, anoraks (including ski-jackets),
205 62019990 windcheaters, wind jackets and similar articles other than those of heading 6203: of Protech
other textile materials: other than silk
Women's or girls’ overcoats, raincoats, car-coats, capes, cloaks and similar articles: of
206 62021200 Protech
cotton
Women's or girls’ overcoats, raincoats, car-coats, capes, cloaks and similar articles: of
207 62021300 Protech
man-made fibres
Garments, made up of fabrics of heading 5602, 5603, 5903, 5906 or 5907: of fabrics
208 62101000 Protech
of heading 5602 or 5603
Garments, made up of fabrics of heading 5602, 5603, 5903, 5906 or 5907: other
garments, of the type described in subheadings 6201 11 to 6201 19: other (excluding
209 62102090 Protech
outer garments of rubberised textile fabrics, impregnated, coated, covered or
laminated and other artificial plastic materials)
Garments, made up of fabrics of heading 5602, 5603, 5903, 5906 or 5907: other
210 62103030 garments, of the type described in subheadings 6202 11 to 6202 19: outer garments, Protech
of fabrics otherwise impregnated
Tarpaulins, awnings and sunblind; tents; sails for boats, sailboards or land craft;
211 63069010 Sportech
camping goods: other: of cotton
Woven fabrics of carded wool or of carded fine animal hair: containing 85% or more
212 51111990 Sportech
by weight of wool or of fine animal hair: of a weight not exceeding 300 g/m2 : other
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
than of unbleached, bleached, dyed and printed

Woven fabrics of combed wool or of combed fine animal hair: containing 85% or
213 51123090 more by weight of wool or of fine animal hair: other, mixed mainly or solely with man- Sportech
made staple fibres: other than of unbleached, bleached, dyed and printed
214 61123100 Men's or boys' swimwear: of synthetic fibres Sportech
215 61123920 Men's or boys' swimwear: of other textile materials: of artificial fibres Sportech
216 61123990 Men's or boys' swimwear: of other textile materials: other than silk and artificial fibres Sportech
217 61124100 Women’s or girls’ swimwear: of synthetic fibre Sportech
218 61124910 Women’s or girls’ swimwear: of other textile materials: of silk Sportech
219 61124920 Women’s or girls’ swimwear: of other textile materials: of artificial fibres Sportech
Women’s or girls’ swimwear: of other textile materials: other than silk and artificial
220 61124990 Sportech
fibres
Women's or girls' overcoats, car-coats, capes, cloaks, anoraks (including ski-jackets),
221 62029110 windcheaters, wind-jackets and similar articles, other than those of heading 6204: Sportech
other: of wool or fine animal hair: wind and ski-jackets, windcheaters
other: of cotton: wind and ski-jackets, windcheaters
other: of man-made fibres: wind and ski-jackets, windcheaters
other: of other textile materials: wind and ski-jackets
225 62111100 Swimwear: men's or boys' Sportech
226 62111200 Swimwear: women's or girls' Sportech
Tarpaulins, awnings and sunblinds; tents; sails for boats, sailboards or landcraft;
227 63061930 Sportech
camping goods: of other textile materials: venetian or Austrian blinds
228 63064000 Sportech
camping goods: pneumatic mattresses
229 63069090 Sportech
camping goods: other: of other textile materials
230 88010020 Balloons and dirigibles; gliders, hang gliders and other non-powered aircraft: balloons Sportech
231 95042000 Articles and accessories for billiards of all kinds Sportech
Tennis, badminton or similar rackets, whether strung: lawn-tennis rackets, whether
232 95065100 Sportech
strung
233 95065910 Other: squash or racquetball badminton rackets, whether strung Sportech
Articles and equipment for general physical exercise, gymnastics, athletics, other
234 95066210 sports (including table-tennis) or out-door games, not specified or included elsewhere Sportech
in this chapter; swimming pools and paddling pools: inflatable: football
in this chapter; swimming pools and paddling pools: inflatable: volley ball
in this chapter; swimming pools and paddling pools: inflatable: basket ball
in this chapter; swimming pools and paddling pools: inflatable: other
Articles and equipment for general physical exercise, gymnastics or athletics: boxing
238 95069110 Sportech
equipment
239 95069920 Leg pads and bats for cricket Sportech
240 95069930 Shoulder pads for football Sportech
241 95069970 Tennis and badminton racket pressures Sportech
in this chapter; swimming pools and paddling pools: other: other
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Annexure 3
List of standards developed by BIS in Agrotech
IS Number Title
Agro textiles - Laminated high density polyethylene HDPE woven geomembrane for waterproof
1. IS 15351:2015
lining specification (second revision)
2. IS 15907:2010 Agro textiles - High density polyethylene HDPE woven beds for vermiculture – Specification
Agro textiles - Shade nets for agriculture and horticulture purposes - Specification part 1 shade
3. IS 16008: Part 1: 2016
nets made from tape yarns first revision
Agro textiles - Shade nets for agriculture and horticulture purposes - Specification part 2 shade
4. IS 16008: Part 2: 2016
nets made from monofilament yarns first revision
Agro textiles - High density polyethylene HDPE laminated woven lay flat tube for irrigation purpose
5. IS 16190:2014
– Specification
6. IS 16202:2014 Agro textiles - Woven ground covers for horticulture application – Specification
7. IS 16390:2015 Agro textiles - Nylon knitted seamless gloves for tobacco harvesters – Specification
8. IS 16513:2016 Agro textiles - Insect nets for agriculture and horticulture purposes - Specification
Agro textiles - High density polyethylene HDPE laminated woven lay flat tube for use in mains and
9. IS 16627:2017
sub mains of drip irrigation system - Specification
Agro textiles - Propylene spun bonded nonwoven mulch mat for agricultural and horticultural
10. IS 17355:2020
applications – Specification
11. IS 17356:2020 Agro textiles - Windshield nets for agriculture and horticulture purposes – Specification
12. IS 17357:2020 Agro textiles - Harvest nets for agriculture and horticulture purposes – Specification
Agro textiles - Fencing nets for agriculture and horticulture purposes - Specification part 1 fencing
13. IS 17358: Part 1: 2020
nets made from extruded polymer mesh
Agro textiles - Fencing nets for agriculture and horticulture purposes - Specification part 2 fencing
14. IS 17358: Part 2: 2020
nets made from monofilament yarns and combination of tape and monofilament yarns
15. IS 17513:2020 Agro Textiles - Plant support nets for agriculture and horticulture purposes – Specification
16. IS 16366:2015 Glossary of terms used in agrotextile
17. IS 16089:2013 Jute agro-textile - Sapling bags for growth of seedling sapling – Specification
18. IS 17070:2019 Jute agrotextiles for growth of plant and suppression of weeds - Specification
Textiles Polypropylene spun bonded nonwoven crop cover fabric for agricultural and horticultural
19. IS 16718:2017
applications - Specification
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Annexure 4
List of standards developed by BIS in Buildtech
S No. IS No. Title
1. IS 10321 (Part 1 to 3):1982 Specification for 50-kg tent
2. IS 11057:1984 Specification for industrial safety nets
3. IS 12989:2016 Camping tents (third revision)
Textiles - Camping tents and caravan awnings vocabulary and list of equivalent
4. IS 12991:2005
terms (first revision)
Textiles - Awnings for leisure accommodation vehicles requirements and test

5. IS 15272:2020
methods (second revision)
6. IS 15566:2005 Textiles - Caravan awnings - Functional requirements and test methods
7. IS 1648:2016 Textiles - Synthetic micro-fibres for use in cement-based matrix - Specification
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Annexure 5
List of standards developed by BIS in Clothtech
S No IS Number Title
1. IS 1718:1988 Specification for cotton spindle tapes (second revision)
2. IS 1740:1977 Specification for flat cotton wicks (first revision)
3. IS 1895:1982 Specification for cotton NEWAR (second revision)
Textiles - Cotton selvedge tapes for electrical insulation purposes - Specification (third
4. IS 1923:2003
revision)
5. IS 1974:1982 Specification for cotton spindle tapes for jute industry (second revision)
6. IS 2847:1964 Specification for cotton selvedge tape for electric cables
7. IS 4778:1982 Specification for cotton laces for footwear (first revision)
Textiles - Polyester fibre woven tapes for electrical insulation purposes - Specification (second
8. IS 5351:2001
revision)
9. IS 5352: Part 1:1999 Textile glass and glass-polyester fibre woven tapes part 1 specification (third revision)
10. IS 5352: Part 2:1999 Textiles Glass and glass-polyester fibre woven tapes part 2 methods of test (third revision)
11. IS 5354:1992 Textiles - Cotton stripping tape for electrical purposes - Specification (first revision)
12. IS 5656:1970 Specification for cotton braid for sleeving
13. IS 6117:1977 Specification for tapes cotton (first revision)
14. IS 6487:1983 Specification for cotton tapes unproofed and proofed for ammunition purposes (first revision)
15. IS 6488:1999 Textiles - Cotton webbing for personal web equipment - Specification (third revision)
16. IS 6672:1989 Cotton tapes for berets mercerised - Specification (first revision)
17. IS 6673:1972 Specification for waxed cotton selvedge tape
18. IS 7298:1973 Specification for cotton webbing proofed and unproofed
19. IS 7426:1989 Cotton webbing special - Specification (first revision)
20. IS 7776:1975 Specification for silk webbing
21. IS 7777:1987 Specification for cotton webbing rolled edges (first revision)
22. IS 8302:1977 Specification for braided tape for berets
23. IS 8894:1978 Specification for cotton tapes for slide fasteners
24. IS 9675:1980 Specification for woven cotton tapes light medium and heavy qualities
25. IS 9686:1980 Specification for elastic tape
26. IS 10056:1982 Specification for silk viscose rayon ribbon tape
27. IS 10057:1982 Specification for cotton tapes for wagon sealing
28. IS 10415:1992 Textiles - Polyester fibreglass tapes - Specification (first revision)
29. IS 10692:1983 Specification for high density polyethylene webbing
30. IS 12111:1987 Glossary of terms relating to narrow fabrics
31. IS 13597:1992 Textiles - Polypropylene braided tapes for berets - Specification
32. IS 13598:1992 Textiles - High density polyethylene monofilament NEWAR - Specification
33. IS 14358:1996 Textiles - Nylon laces for shoes and boots - Specification
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Annexure 6
List of standards developed by BIS in Geotech
IS Number Title
Geotextiles - Methods of test part 2 determination of resistance to exposure of ultraviolet light and
1. IS 13162 (Part 2):1991
water xenon-arc type apparatus
2. IS 13162 (Part 3):1992 Geotextiles - Methods of test part 3 determination of thickness at specified pressures
3. IS 13162 (Part 4):1992 Geotextiles - Methods of test part 4 determination of puncture resistance by falling cone method
4. IS 13321 (Part 1):1992 Glossary of terms for geo-synthetics part 1 Terms used in materials and properties
5. IS 13325:1992 Determination of tensile properties of extruded polymer geogrids using the wide strip - Test method
Evaluation of interface friction between geosynthetics and soil method of test part 1 modified direct
6. IS 13326 (Part 1):1992
shear technique
7. IS 14293:1995 Geotextiles - Method of test for trapezoid tearing strength
8. IS 14294:1995 Geotextiles - Method for determination of apparent opening size by dry sieving technique
9. IS 14324:1995 Geotextiles - Methods of test for determination of water permeability permittivity
10. IS 14706:1999 Geotextiles - Sampling and preparation of test specimens
11. IS 14714:1999 Geotextiles - Determination of abrasion resistance
12. IS 14715 (Part 1):2016 Jute geotextiles part 1 strengthening of sub-grade in roads - Specification (second revision)
13. IS 14715 (Part 2):2016 Jute geotextiles part 2 control of bank erosion in rivers and waterways - Specification second revision
14. IS 14716:1999 Geotextiles - Determination of mass per unit area
15. IS 14739:1999 Geotextiles - Method for determination of creep
Guidelines for application of jute geotextile for rainwater erosion control in road and railway
16. IS 14986:2001
embankments and hill slopes
17. IS 15060:2018 Geosynthetics - Tensile test for joint seams by wide-width strip method first revision
IS 15868 (Part 1 to 6):
18. Natural fibre geotextiles - Jute geotextile and coir BHOOVASTRA - Methods of test
2008
19. IS 15869:2020 Textiles - Open weave coir Bhoovastra - Specification first revision
20. IS 15871: 2009 Use of coir geotextiles coir BHOOVASTRA in unpaved roads Guidelines
Application of coir geotextiles - Coir woven BHOOVASTRA for rain water erosion control in roads
21. IS 15872: 2009
railway embankments and hill slopes - Guidelines
IS 15891 (Part 1):
22. Textiles - Test methods for non-wovens Part 1 - Determination of mass per unit area
2011
23. IS 15891 (Part 2):2011 Textiles - Test methods for non-wovens Part 2 - Determination of thickness
24. IS 15891 (Part 3):2011 Textiles - Test methods for nonwovens Part 3 - Determination of tensile strength and elongation
25. IS 15891: Part 4:2011 Textiles - Test methods for nonwovens Part 4 - Determination of tear resistance
26. IS 15891: Part 6:2012 Textiles - Test methods for nonwovens Part 6 - Absorption
27. IS 15891: Part 7:2012 Textiles - Test methods for nonwovens Part 7 - Determination of bending length
Textiles - Test methods for nonwovens Part 8 - Determination of liquid strike-through time simulated
28. IS 15891: Part 8:2012
urine
29. IS 15891: Part 9:2012 Textiles - Test methods for non-wovens Part 9 - Determination of drapability including coefficient
30. IS 15909:2020 PVC geomembranes for Lining - Specification (second revision)
31. IS 15910:2010 Geo-synthetics for highways - Specification
32. IS 16078:2013 Geosynthetics - Static puncture test CBR test
33. IS 16090:2013 Geo-synthetics - Geo-textiles used as protection or cushioning materials - Specification
34. IS 16237:2014 Geo-synthetics - Method for determination of apparent opening size by wet sieving
Geosynthetics - Standard practice for exposure and retrieval of samples to evaluate installation
35. IS 16341:2015
damage of geosynthetics
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
36. IS 16342:2015 Geosynthetics - Method of test for grab breaking load and elongation of geotextiles
37. IS 16343:2015 Geosynthetics - Guidelines for installation of geotextiles as pavement fabric
Geosynthetics - Guidelines for installation of geotextile for permanent erosion control in hard armour
38. IS 16344:2015
systems
Geosynthetics - Guidelines for installation of geotextile used in subgrade separation in pavement
39. IS 16345:2020
structures (first revision)
Geosynthetics - Method of test for evaluation of stress crack resistance of polyolefin geomembranes
40. IS 16346:2015
using notched constant tensile load test
41. IS 16347:2015 Geosynthetics - Method of test for effects of temperature on stability of geotextile
42. IS 16348:2015 Geosynthetics - Method of test for index puncture resistance of geomembranes and related products
Geosynthetics - Guidelines for installation of geogrids used as reinforcement of base and sub-base
43. IS 16349:2015
layers in pavement structures
Geosynthetics - Standard practice for laboratory immersion procedures for evaluating the chemical
44. IS 16351:2015
resistance of geosynthetics to liquids
Geosynthetics - High density polyethylene HDPE geomembranes for lining - Specification (first
45. IS 16352:2020
revision)
Geosynthetics - Guidelines for installation of geogrids used as soil reinforcement in mechanically
46. IS 16355:2015
stabilised earth MSE retaining structures
47. IS 16356:2015 Geosynthetics - Method of test for pore size characteristics of geotextiles by capillary flow test
Geosynthetics - Geotextiles used in subgrade stabilisation in pavement structures - Specification (first
48. IS 16362:2020
revision)
49. IS 16363:2015 Geosynthetics - Guidelines for installation of geotextile used in subsurface drainage application
Geosynthetics - Method of test for measuring pull-out resistance of geosynthetics in soil (first
50. IS 16380:2020
revision)
51. IS 16389:2015 Geosynthetics - Method of test for biological clogging of geotextile or soil geotextile filters
52. IS 16391:2015 Geosynthetics - Geotextiles used in sub-grade separation in pavement structures - Specification
53. IS 16392:2015 Geosynthetics - Geotextiles for permanent erosion control in hard armour systems - Specification
54. IS 16393:2015 Geosynthetics - Geotextiles used in subsurface drainage application - Specification
Geosynthetics - Method of test for tensile properties of geogrids by the single or multi-rib tensile
55. IS 16474:2015
method
Geosynthetics - Method of test for determination of 2% secant modulus for polyethylene
56. IS 16475:2015
geomembranes
Geosynthetics - Method of test for determination of 2 performance strength of geomembranes by the
57. IS 16477:2015
wide strip tensile method
Geosynthetics - Method for microscopic evaluation of the dispersion of carbon black in polyolefin
58. IS 16483:2017
geosynthetics
Geosynthetics - Method of test for determination of pyramid puncture resistance of unprotected and
59. IS 16493:2017
protected geomembranes
60. IS 16635:2017 Geosynthetics - Wide - Width tensile test
Geosynthetics - Needle-punched nonwoven geobags for coastal and waterways protection -
61. IS 16653:2017
Specification
Geosynthetics - Polyprophylene multifilament woven geobags for coastal and waterways protection -
62. IS 16654:2017
Specification
63. IS 17179:2019 Geotextiles and geotextile-related products - Determination of water flow capacity in their plane
Geosynthetics - Screening test method for determining the resistance of geotextiles and geotextile-
64. IS 17360:2020
related products to oxidation
Geotextiles and geotextile-related products - Screening test method for determining the resistance to
65. IS 17363:2020
liquids
66. IS 17365:2020 Guidelines for the determination of the long-term strength of geosynthetics for soil reinforcement
67. IS 17368:2020 Geosynthetics - Determination of damage to geosynthetic caused during installation
68. IS 17369: Part 1:2020 Geotextiles and geotextile-related products - Strength of internal structural junctions Part 1 - Geocells
Geotextiles and geotextile-related products - Strength of internal structural junctions Part 2 -
69. IS 17369: Part 2:2020
Geocomposites
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
70. IS 17371:2020 Geosynthetics - Geogrids for flexible pavements - Specification

Geosynthetics - Polymeric strip geostrip used as soil reinforcement in retaining structures -
71. IS 17372:2020
Specification
72. IS 17373:2020 Geosynthetics - Geogrids used in reinforced soil retaining structures - Specification
Geosynthetics - Reinforced HDPE membrane for effluents and chemical resistance lining -
73. IS 17374:2020
Specification
Geosynthetics- Index test procedure for the evaluation of mechanical damage under repeated loading
74. IS 17420:2020
damage caused by granular materials laboratory test method
75. IS 17421:2020 Geosynthetics - Identification on site
76. IS 17483: Part 1:2020 Geosynthetics - Geocells - Specification Part 1 - Load bearing application
77. IS 17483: Part 2:2020 Geosynthetics - Geocells - Specification Part 2 - Slope erosion protection application
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Annexure 7
List of standards developed by BIS in Indutech
IS Number Title
1. IS 1178:1986 Specification for cotton filter cloth (second revision)
2. IS 1422:1983 Specification for cotton duck (third revision)
3. IS 1424:1983 Specification for cotton canvas (third revision)
4. IS 1719:2000 Industrial textiles - Pressed wool felts specification (fourth revision)
5. IS 4388:1982 Specification for cotton fabrics for reinforcement of rubber hoses (first revision)
6. IS 4399:1967 Specification for nylon fabrics for industrial and special purposes
7. IS 5996:1984 Specification for cotton belting ducks (second revision)
8. IS 6803:1972 Specification for special proofed canvas and duck
9. IS 7610: Part 1:1975 Specification for machinery fabrics wool Part 1 - General
10. IS 7610: Part 2:1975 Specification for machinery fabrics wool Part 2 - Clearer cloth
11. IS 7610: Part 3:1975 Specification for machinery fabrics wool Part 3 - Sizing flannel
12. IS 7610: Part 4:1982 Specification for machinery fabrics wool Part 4 - Plaiting cloth (first revision)
13. IS 7610: Part 5:1976 Specification for machinery fabrics wool Part 5 - Lapping cloth
14. IS 8995:1979 Specification for cotton cover fabrics for fan belts and V-belts
15. IS 9230:1979 Specification for cotton chafer fabrics
16. IS 9293:1991 Textiles Canvas flax - Specification (first revision)
17. IS 9998:1981 Specification for cotton liner fabrics
18. IS 10055:1982 Specification for jute needleloom felts
19. IS 11574:1986 Specification for polyamide filter cloth
20. IS 11575:1986 Specification for polyester filter cloth
21. IS 11986:2003 Industrial textiles Cotton backing cloth for abrasives - Specification (first revision)
22. IS 12020: Part 1:1987 Specification for polypropylene filter cloth - Part 1 - Filter cloth from spun polypropylene yarn
23. IS 12384:1988 Specification for rayon duck for industrial use
24. IS 12415:1988 Specification for polyamide duck for industrial use
25. IS 12416:1988 Specification for polyester cotton belting duck
26. IS 12806:1989 Nonwoven fusible interlinings - Specification
27. IS 12809:1989 Nonwovens sew-in interlinings - Specification
Textiles Fabric woven glass fibre for electrical insulation and plastic laminate - Specification Part 1 -
28. IS 13128: Part 1:1991
Loomstate fabrics
Textiles Fabric woven glass fibre for electrical insulation and plastic laminate - Specification Part 2 -
29. IS 13128: Part 2:1991
Desized and finished fabrics
30. IS 13362:1992 Textiles - Asbestos yarn - Specification
31. IS 13510:2000 Textiles - Duck polyester cotton blended rip-stop - Specification first revision
32. IS 14445:1997 Textiles - Fabrics for awnings and camping tents - Specification
33. IS 15595:2005 Industrial textiles - Bonded fabrics for air filtration - Specification
Textiles - Test methods for nonwovens - Part 5 - Determination of resistance to mechanical penetration
34. IS 15891: Part 5:2017
Ball burst procedure
35. IS 15891: Part 10:2017 Textiles - Test methods for nonwovens - Part 10 - Lint and other particle generation in the dry state
36. IS 15891: Part 11:2017 Textiles - Test methods for nonwovens - Part 11 - Run-off
37. IS 15891: Part 12:2017 Textiles - Test methods for nonwovens - Part 12 - Demand absorbency
38. IS 15891: Part 13:2017 Textiles - Test methods for nonwovens - Part 13 - Repeated liquid strike-through time
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
39. IS 15891: Part 14:2017 Textiles - Test methods for nonwovens - Part 14 - Coverstock wetback
40. IS 15891: Part 1:2017 Textiles - Test methods for nonwovens - Part 15 - Determination of air permeability
IS 15891: Part 16: 2017 Textiles - Test methods for nonwovens - Part 16 - Determination of resistance to penetration by water
41.
ISO 9073-16:2007 hydrostatic pressure
42. IS 15891: Part 17:2017 Textiles - Test methods for nonwovens - Part 17 - Determination of water penetration spray impact
Textiles - Test methods for nonwovens - Part 18 - Determination of breaking strength and elongation of
43. IS 15891: Part 18:2017
nonwoven materials using the grab tensile test
44. IS 16126:2013 Textiles - Waterproof tarpaulins made from woven polyester fabric - Specification
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Annexure 8
List of standards developed by BIS in Meditech
IS Number Title
1. IS 674:1987 Specification for flannel hospital grey (third revision)

2. IS 757:1971 Specification for handloom cotton lint absorbent bleached non-sterilised (first revision)
3. IS 758:1988 Specification for cotton gauze absorbent non-sterilised (fourth revision)
4. IS 863:1988 Specification for cotton bandage cloth non-sterilised (second revision)
5. IS 1681:1998 Textiles - Hospital blankets woollen dyed - Specification (third revision)
6. IS 4605:2020 Crepe bandage - Specification (Second Revision)
7. IS 4717:2020 Medical Textiles - Zinc Oxide self-adhesive plaster - Specification (second revision)
8. IS 4738:2020 Medical Textiles - Bandage plaster of Paris - Specification (third revision)
9. IS 4739:1986 Specification for zinc oxide elastic self-adhesive bandage (first revision)
10. IS 5405:2019 Sanitary napkins - Specification (second revision)
11. IS 6237:1971 Specification for handloom cotton cloth for plaster of Paris bandages and cut bandages
12. IS 9751:1981 Specification for bandage suspensory
13. IS 10829:1993 X-ray detectable gauze swabs and laparotomy sponges - Specification first revision
14. IS 11046:1984 Specification for towel operating
15. IS 11163:1985 Specification for first-aid dressings
16. IS 12839:1989 Wool polyamide blended flannel hospital grey - Specification
17. IS 14274:1995 Bandage T - Shaped calico - Specification
18. IS 14306:1995 Bandage triangular calico - Specification
19. IS 14316:1995 Swabs small in bag of 50 - Specification
20. IS 14944:2020 Surgical dressings methods of test first revision
21. IS 16111:2013 Elastic bandage
Medical textiles - Method for evaluation of the bacterial filtration efficiency of surgical
22. IS 16288:2014
face masks
23. IS 16289:2014 Medical textiles - Surgical face masks - Specification
24. IS 16290:2014 Medical textiles - Knitted viscose primary dressings - Specification
25. IS 16291:2014 Medical textiles - Paraffin gauze dressings - Specification
26. IS 16302:2020 Medical Textiles Orthopaedic Stockinet Specification First Revision
27. IS 16303:2014 Medical textiles - Cast padding for orthopaedic plaster - Specification
Medical Textiles - Povidone iodine ointment based knitted dressing - Specification first
28. IS 16466:2020
revision
29. IS 16467:2016 Medical textiles - Graduated medical compression stockings - Specification
30. IS 16468:2016 Medical textiles - Absorbent cotton sterile and non-sterile - Specification
31. IS 16469:2016 Medical textiles - Open weave bandages - Specification
32. IS 16470:2016 Medical textiles - Elastic surgical adhesive tapes - Specification
Clothing for protection against contact with blood and body fluids Determination of
33. IS 16545:2016 resistance of protective clothing materials to penetration by blood-borne pathogens -
Test method using Phi-X174 bacteriophage
Clothing for protection against contact with blood and body fluids - Determination of
34. IS 16546:2016 the resistance of protective clothing materials to penetration by blood and body fluids -
Test method using synthetic blood
Clothing for protection against infectious agents - Test method for resistance to dry
35. IS 16548:2016
microbial penetration
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Surgical drapes gowns and clean air suits used as medical devices for patients clinical
36. IS 16549:2020 staff and equipment - Test method to determine the resistance to wet bacterial
penetration first revision
37. IS 16660:2017 Medical textiles - Nonwoven bandage rolls - Specification
38. IS 16668:2017 Medical textiles - Salicylic acid adhesive plaster - Specification
39. IS 16669:2017 Medical textiles - Elastic adhesive dressing - Specification
40. IS 16670:2017 Medical textiles - Absorbent cotton ribbon gauze - Specification
41. IS 16671:2020 Medical Textiles - Belladonna adhesive plaster - Specification first revision
42. IS 16946:2018 Medical textiles - Elasticated tubular bandages - Specification
43. IS 16948:2018 Medical textile - Permeable nonwoven surgical adhesive tape - Specification
44. IS 16949:2018 Medical textiles - Adhesive extension plaster - Specification
45. IS 16950:2018 Medical textiles - X-Ray detectable absorbent cotton gauze - Specification
Medical textiles - Test methods for compresses for wound management and surgical
46. IS 17243:2019
procedures
Textiles - Determination of antifungal activity of textile products - Part 1 -
47. IS 17333: Part 1:2020
Luminescence method
Textiles - Determination of antifungal activity of textile products - Part 2 - Plate count
48. IS 17333: Part 2:2020
method
49. IS 17334:2019 Medical textiles - Surgical gowns and surgical drapes - Specification
50. IS 17347:2020 Textiles - Determination of antiviral activity of textile products
51. IS 17348:2020 Medical textiles - Adhesive incise drape - Specification
52. IS 17349:2020 Medical textiles - Shoe covers - Specification
53. IS 17350:2020 Medical textiles - Abdominal binder - Specification
54. IS 17351:2020 Medical textiles - Dressing shell compressed - Specification
55. IS 17352:2020 Medical textiles - Foam dressing - Specification
56. IS 17353:2020 Medical textiles - Pressure garment - Specification
57. IS 17354:2020 Medical textiles - Dental bib napkins - Specification
Medical textiles - Anti-embolic stocking for Post-op use up to thigh medium -
58. IS 17359:2020
Specification
59. IS 17423:2020 Medical textiles - Coveralls for COVID 19 - Specification
60. IS 17506:2020 Medical Textiles - Hydrocolloid Dressing - Specification
61. IS 17507:2020 Medical Textiles - Cellulose Wading - Specification
62. IS 17508:2020 Disposable adult incontinence diaper - Specification
63. IS/ISO 20645:2004 Textile fabrics - Determination of antibacterial activity - Agar diffusing plate test
64. IS 17514:2021 Reusable sanitary pad/sanitary napkin /period panties – Specification
65. IS 17528:2021 Medical textiles – Chlorhexidine gauze dressing – Specification
66. IS/ISO 20743:2013 Textiles - Determination of antibacterial activity of textile products
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Annexure 9
List of standards developed by BIS in Mobiltech
IS Number Title
Methods of test for tyre yarns cords and tyre cord warp-sheets made from man-made
1. IS 4910: Part 1:1989
fibres - Part 1 - Definition of terms first revision
Tyre yarns cords and tyre cord warp-sheets made from man-made fibres - Method of
2. IS 4910: Part 2:1989
test - Part 2 - Linear density first revision
Tyre yarns cords and tyre cord warp-sheets made from man-made fibres - Methods of
3. IS 4910: Part 3:1989
test - Part 3 - Load and elongation characteristics first revision
4. IS 4910: Part 4:1989
test - Part 4 - Dip pick-up first revision
5. IS 4910: Part 5:1989
test - Part 5 - Heat shrinkage and heat shrinkage force first revision
6. IS 4910: Part 6:1989
test - Part 6 - Wet contraction and wet contractile force first revision
7. IS 4910: Part 7:1989
fibres - Part 7 - Heat degradation first revision
8. IS 4910: Part 8:1989
tests - Part 8 - Thickness first revision
Methods of test for tyre yarns cords and tyre cord fabrics made from man-made fibres -
9. IS 4910: Part 9:978
Part 9 - Sampling for tyre yarns cords and tyre cord fabrics made from rayon
10. IS 4910: Part 10:1989
fibres - Part 10 - Creep first revision
11. IS 4910: Part 11:1989
fibres Part 11 Commercial mass first revision
Methods of test for tyre yarns cords and tyre cord fabrics made from man-made fibres -
12. IS 4910: Part 12:1981
Part 12 - Sampling for tyre yarns cords and tyre cord fabrics made from polyamide
13. IS 4910: Part 13:1989 fibres - Method of test - Part 13 - Static adhesion of textile tyre cord to vulcanised
rubber
14. IS 7133:1985 Specification for cotton tyre cord and warp sheet for cycle and rickshaw first revision
15. IS 11573:1986 Specification for polyamide yarn for cycle and rickshaw tyres
16. IS 11926:1987 Specification for polyamide tyre cord warp sheet for automotive tyres
17. IS 13137:2003 Textiles - Tyre cord warp-sheet - Polyamide dipped - Specification (first revision)
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Annexure 10
List of standards developed by BIS in Packtech
IS Number Title
1. IS 6192:1994 Textiles - Monoaxially oriented high density polyethylene tapes - Specification (second revision)
2. IS 6193:1971 Methods of tests for monoaxially oriented high density polyethylene polypropylene tapes
3. IS 6899:1997 Textiles - High density polyethylene HDPE woven fabrics - Specification (second revision)
4. IS 7903:2017 Textiles - Tarpaulins made from high density polyethylene HDPE woven fabrics - Specification (fifth revision)
5. IS 8069:1989 High density polyethylene HDPE woven sacks for packing pesticides - Specification (second revision)
Textiles - High density polyethylene HDPE polypropylene PP woven sacks for packing fertilisers - Specification
6. IS 9755:2021
(sixth revision)
7. IS 11197:1985 Specification for monoaxially oriented polypropylene tapes
Textiles - High density polyethylene HDPE polypropylene PP woven sacks for packaging of 50 kg cement -
8. IS 11652:2017
Specification (third revision)
9. IS 12100:1987 Specification for high density polyethylene HDPE woven sacks for packing flour
Textiles - High density polyethylene HDPE polypropylene PP woven sack for filling sand - Specification (second
10. IS 14252:2015
revision)
Textiles - High density polyethylene HDPE polypropylene PP woven sacks for packaging of 50 kg food grains -
11. IS 14887:2014
Specification (first revision)
Textiles - High density polyethylene HDPE polypropylene PP woven sacks for packing 50 Kg 25 kg sugar -
12. IS 14968:2015
Specification first revision
Textiles - High density polyethylene HDPE polypropylene PP leno woven sacks for packaging and storage of
13. IS 16187:2014
fruits and vegetables - Specification
Textiles - High density polyethylene HDPE polypropylene PP woven sacks for packaging 10 kg 15 kg 20 kg 25
14. IS 16208:2015
kg and 30 kg food grains - Specification
Textiles - High density polyethylene HDPE polypropylene PP woven sacks for packaging of 25 kg polymer
15. IS 16703:2017
materials - Specification
Textiles - Polypropylene PP woven laminated block bottom valve sacks for packaging of 50 kg cement -
16. IS 16709:2017
Specification
17. IS 17279:2019 Textiles - Polypropylene PP nonwoven sacks for packing bulk commodities - Specification
Textiles - Polypropylene PP high-density polyethylene HDPE laminated woven sacks for mail sorting storage
18. IS 17399:2020
transport and distribution - Specification
19. IS 2873:1991 Textiles - Packaging of jute products in bales - Specification (second revision)
20. IS 12650:2018 Textiles - Jute bags for packing 50 kg food grains - Specification (third revision)
21. IS 13649:1993 Textiles - Polyethylene lined jute bags for packing tea - Specification
22. IS 15138:2010 Textiles - Jute bags for packing 50 kg sugar - Specification (first revision)
23. IS 16186:2014 Textiles - Lightweight jute sacking bags for packing 50 kg food grains - Specification
24. IS 16371: 2015 Textiles - Lightweight jute sacking bags 600 g for packing 50 kg food grains - Specification
25. IS 16372:2015 Textiles - Jute bags for packing up to 30 kg food grains - Specification
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Annexure 11
List of standards developed by BIS in Protech
IS Number Title
1. IS 1097:1979 Specification for handloom cotton mosquito netting first revision
2. IS 1143:1973 Specification for cotton mosquito netting square mesh first revision
3. IS 1431:1973 Specification for cotton mosquito netting round mesh first revision
4. IS 4355:1977 Specification for fire-resistant brattice cloth first revision
5. IS 6994: Part 1:1973 Specification for industrial safety gloves - Part 1 - Leather and cotton gloves
6. IS 8990:1978 Code of practice for maintenance and care of industrial safety clothing
7. IS 9886:1990 Mosquito nets - Specification first revision
Textiles - High density polyethylene HDPE monofilament mosquito netting round mesh -
8. IS 10054:1996
Specification first revision
9. IS 11871:1986 Methods for determination of flammability and flame resistance of textile fabrics
Textiles - Assessment of the ignitability of upholstered furniture - Part 1 - Ignition source
10. IS 12467: Part 1:2006
smouldering cigarette first revision
Textiles - Assessment of the ignitability of upholstered furniture - Part 2 - Ignition source
11. IS 12467: Part 2:2006
match flame equivalent first revision
12. IS 12722:1989 Textile floor coverings - Determination of flame resistance by tablet test
13. IS 13501:1992 Textiles - Determination of flammability by oxygen index
14. IS 14744:1999 Flame retardant protective hoods - Specification
15. IS 14953:2006 Textiles - Polyester or polyamide mosquito nets - Specification first revision
16. IS 15071:2002 Chemical protective clothing - Specification
17. IS 15321:2003 Molten metal splash protective hoods - Specification
Textile fabrics - Burning behaviour - Determination of ease of ignition of vertically oriented
18. IS 15589:2005
specimens
Textile fabrics - Burning behaviour - Measurement of flame spread properties of vertically
19. IS 15590:2005
oriented specimens
20. IS 15612: Part 1:2005 Textile - Burning behaviour of curtains and drapes - Part 1 - Classification scheme
Textile - Burning behaviour of curtains and drapes - Part 2 - Measurement of flame spread of
21. IS 15612: Part 2:2006
vertically oriented specimens with large ignition source
Textiles - Burning behaviour of curtains and drapes - Part 3 - Method for determining the
22. IS 15612: Part 3:2005
ignitability of vertically oriented specimens small flame
Textiles - Burning behaviour of curtains and drapes - Part 4 - Method for determining the
23. IS 15612: Part 4:2005
flame spread of vertically oriented specimens
Textiles - Assessment of the ignitability of bedding items - Part 1 - Ignition source
24. IS 15727: Part 1:2020
smouldering cigarette first revision
Textiles - Assessment of the ignitability of bedding items - Part 2 - Ignition source - Match-
25. IS 15727: Part 2:2020
flame equivalent first revision
26. IS 15741:2007 Textiles - Resistance to ignition of curtains and drapes - Specification
Textiles - Requirements for clothing made of limited flame spread materials and material
27. IS 15742:2007
assemblies affording protection against heat and flame - Specification
Textiles - Protective clothing for industrial workers exposed to heat excluding firefighters and
28. IS 15748:2007
welders clothing
Textiles - Protective clothing - Part 1 - Determination of heat transmission on exposure to
29. IS 15758: Part 1:2020
flame first revision
Textiles - Protective clothing - Part 2 - Assessment of material assemblies when exposed to
30. IS 15758: Part 2:2007
source of radiant heat
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Textiles - Protective clothing - Part 3 - Test methods for resistance of materials to penetration
31. IS 15758: Part 3:2007
by liquids
32. IS 15758: Part 4:2020 Textiles - Protective clothing - Part 4 - Method of test for limited flame spread first revision
Textiles - Protective clothing - Part 5 - Assessment of resistance of materials to molten metal
33. IS 15758: Part 5:2020
splash first revision
34. IS 15764:2008 Textiles - Determination of burning behaviour of textile floor coverings
Textiles - Resistance to ignition of upholstered composites used for non-domestic furniture -
35. IS 15768:2008
Specification
36. IS 15781:2008 Textiles - Method for determination of flammability of blankets
Textiles - Method for determining deterioration of visibility due to smoke released on
37. IS 15782:2008
combustion of materials
38. IS 15809:2017 High visibility warning clothes - Specification first revision
39. IS 16655:2017 Textiles - Protective clothing for use in welding and allied processes
40. IS 16725:2018 Textiles - Tactical 3 points sling universal - Specification
Textiles - Pouch for ammunition and grenades made of disruptive pattern nylon 6 6 -
41. IS 16726:2018
Specification
42. IS 16874:2018 Textiles - Protective gloves for firefighters - Specification
43. IS 16890:2018 Textiles - Protective clothing for firefighters - Specification
44. IS 17051:2018 Textiles - Bullet resistant jackets - Performance requirements
45. IS 17286:2019 Textiles - Waterproof multipurpose rain poncho with convertibility as bivouac - Specification
Textiles - Flame retardant jute based decorative and cover fabric for temporary structure -
46. IS 17291:2019
Specification
Textiles - Nuclear biological chemical NBC permeable protective clothing - Part 1 - Qualitative
47. IS 17377: Part 1:2020 method of determining breakthrough time on exposure to chemical warfare agent sulphur
mustard HD
Textiles - Nuclear biological chemical NBC permeable protective clothing - Part 2 -
48. IS 17377: Part 2:2020 Quantitative method of determining permeation resistance on exposure to chemical warfare
agent sulphur mustard HD
Textiles - Test method for permeation testing of protective ensembles with nerve agents or
49. IS 17380:2020
simulants
Clothing for protection against heat and flame - Determination of contact heat transmission
50. IS 17462: Part 1:2020 through protective clothing or constituent materials - Part 1 - Contact heat produced by
heating cylinder
Clothing for protection against heat and flame determination of contact heat transmission
51. IS 17462: Part 2:2020 through protective clothing or constituent materials - Part 2 - Test method using contact heat
produced by dropping small cylinders
Protective clothing - Mechanical properties - Test method for the determination of the
52. IS 17464:2020
resistance to puncture and dynamic
53. IS 17465:2020 Protective clothing - Mechanical properties - Determination of resistance to puncture
Protective clothing - Mechanical properties - Determination of resistance to cutting by sharp
54. IS 17466:2020
objects
Protective clothing - Test methods for clothing providing protection against chemicals - Part 1
55. IS 17467: Part 1:2020
- Determination of resistance to outward leakage of gases internal pressure test
56. IS 17467: Part 2:2020
- Determination of resistance to inward leakage of aerosols and gases inward leakage test
57. IS 17467: Part 3:2020
- Determination of resistance to penetration by a spray of liquid spray test
58. IS 17467: Part 4:2020
- Determination of resistance to penetration by a spray of liquid spray test
59. IS 17467: Part 5:2020
- Determination of resistance to penetration by a spray of liquid manikin spray test
Clothing and equipment for protection against heat - Test method for convective heat
60. IS 17468:2020
resistance using a hot air circulating oven
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Annexure 12
List of standards developed by BIS in Sportech
IS Number Title
1. IS 8430:1977 Specification for nylon fabrics for inflatable equipment
2. IS 8991:1978 Specification for nylon fabric for sleeping bags
3. IS 11915:1986 Specification for nylon fabric for making mountaineering equipment
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Annexure 13
List of standards developed by BIS in Composites and Specialty Fibres
IS Number Title
1. IS 17297:2019 Textile glass - Staple fibres or filaments - Determination of average diameter
2. IS 17298 :2019 Reinforcement yarns - Determination of linear density
3. IS 17299:2019 Reinforcement yarns - Determination of twist
4. IS 17300:2019 Textile glass - Yarns designation
5. IS 17301:2019 Textile glass - Yarns determination of breaking force and breaking elongation
6. IS 17302:2019 Textile glass - Mats determination of tensile breaking force
7. IS 17303:2019 Reinforcement yarns - Determination of twist balance index
8. IS 17304:2019 Textile glass - Determination of stiffness of rovings
Reinforcements woven fabrics - Determination of number of yarns per unit length of warp
9. IS 17305:2019
and weft
10. IS 17306:2019 Carbon fibre - Determination of density
11. IS 17307:2019 Carbon fibre - Determination of filament diameter and cross-sectional area
12. IS 17308:2019 Carbon fibre - Designation system for filament yarns
13. IS 17309:2019 Reinforcement products - Mats and fabrics - Determination of mass per unit area
14. IS 17311:2019 Carbon fibre - Determination of the tensile properties of single-filament specimens
15. IS 17312:2019 Textile glass - Woven fabrics - Determination of thickness
16. IS 17313:2019 Reinforcement products - Determination of moisture content
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Annexure 14
List of standards developed by BIS in Ropes and Cordages
IS Number Title
1. IS 1084:2005 Textiles – Manila ropes – Specification (fifth revision)
2. IS 1321 ( Part 1) :2003 Sisal ropes – Specification - Part 1 - Untarred varieties (fourth revision)
3. IS 1321 ( Part 2) :1982 Specification for sisal ropes - Part 2 - Tarred varieties (second revision)
4. IS 1410:2019 Textiles – Coir ropes – Specification (fourth revision)
5. IS 1804:2004 Steel wire ropes – Fibre main cores – Specification (fourth revision)
6. IS 1857:1972 Specification for tarred hemp marline, two-ply (first revision)
7. IS 1887:1985 Specification for spun jute yarn (second revision)
8. IS 1912:1984 Specification for country jute twine (second revision)
9. IS 1920:1987 Specification for hemp lines (second revision)
10. IS 2452:1985 Specification for hawser-laid cotton rope (second revision)
11. IS 2453:1989 Cable-laid cotton rope – Specification (second revision)
12. IS 2807:1981 Specification for whipcords (first revision)
13. IS 2819:1983 Specification for braided cotton cord (second revision)
14. IS 3252:1987 Specification for shroud-laid cotton line (second revision)
15. IS 3256:1980 Code for inland packaging of ropes and cordages (first revision)
16. IS 3262:1987 Specification for pilot lead line (first revision)
17. IS 3871:2013 ISO 1968:2004 Fibre ropes and cordage – Vocabulary (third revision)
18. IS 4145:1987 Code of practice for storage of ropes (first revision)
19. IS 4572:2014 ISO 1140:2012 Fibre ropes – Polyamide 3- 4- 8- and 12-Strand ropes
20. IS 4575:1983 Code for handling of fibre ropes (second revision)
Fibre ropes – Polypropylene split film, monofilament, and multifilament
21. IS 5175:2014 ISO 1346:2012 (PP2) and polypropylene high- tenacity multifilament (PP3) – 3-, 4-, 8- and
12-strand ropes (third revision)
22. IS 5176:1985 Specification for hawser-laid hemp ropes (first revision)
23. IS 5177:1985 Specification for jute lines and ropes (first revision)
24. IS 6587:1987 Specification for spun hemp yarn (first revision)
25. IS 7082:1973 Specification for sisal lines
26. IS 8674:2013 ISO 1969:2004 Fibre ropes – Polyethylene – 3- and 4 -strand ropes (third revision)
27. IS 9536:1989 Polyamide cord – Specification (first revision)
28. IS/ISO 9554:2010 ISO 9554:2010 Fibre ropes – General specifications
29. IS 9560:1980 Colour code for identification of ropes and cordage
Manila, nylon, polyester, and polypropylene ropes for marine purpose –
30. IS 9936:1992
Guide on equivalence (first revision)
Natural and man-made fibre rope slings – Recommendations on safe
31. IS 9944:1992
working loads (first revision)
32. IS 11058:1984 Specification for sisal agricultural twines
33. IS 11066:2014 ISO 1141:2012 Fibre ropes - Polyester 3-, 4-, 8- and 12- strand ropes (second revision)
34. IS 11199:1985 Specification for HDPE monofilament twine door nets
35. IS 11521:1985 Specification for cargo handling nets
Specification for netting and fibre rope load restraint systems in surface
36. IS 11927:1987
transport
37. IS 11928 ( Part 1 and 2) : 1987 Specification for roundslings made of man-made fibres for general service
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
38. IS 12733:1989 Polyamide double braided rope - Specification

39. IS 12734:2002 Textiles – Polypropylene twine – Specification (first revision)
40. IS 14928:2001 Textiles - Composite synthetic fibre ropes - Specification
41. IS 14929:2001 Textiles - High strength polyolefins copolymer ropes - Specification
Textiles – Flat woven webbing slings made of man-made fibres for general
42. IS 15041:2001
services
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Annexure 15
Directory of Textile Research Associations in India
S.NO.
Name of TRA Address Phone Number Contact person and email ID
designation
1 Ahmedabad Textile Industry Ahmedabad Textile (079) 26307921, Mr. Pragnesh Shah, [email protected],
Research Association (ATIRA)* Industry's Research 26307922, Director, Extension 350. [email protected]
Association (ATIRA) 26307923, Directors’ Secretariat- [email protected] ,
P.O. Ambawadi 26305131, Mrs. Gretta Joseph, [email protected]
Vistar Ahmedabad - 26305132, Extension: 351 . Mrs. [email protected]
380 015 26303363 Deepali Plawat, Dy. [email protected]
Director, Extension: 384
2 Indian Jute Industries Research 17, Taratala Road, 033-66269207, 033 Dr. Anil Kumar Sharma, [email protected],
Association, Kolkata (IJIRA) Kolkata - 700088 6626 9200 Director. Tel: 033- [email protected]
66269231
Dr. Syamal Kanti

Chakrabarti
Dy. Director.
3 South India Textile Research 13/37, Avinashi 0422-2574367-9, Dr. Prakash Vasudevan [email protected] ,
Association, Coimbatore Road, Coimbatore 4215333 (phone 0422-4215321) , [email protected]
(SITRA)* Aerodrome Post, Director. Dr. S
Coimbatore – 641 Sivakumar, HOD of CoE
014 Meditech (phone 0422-
4215338)
4 Synthetic & Art Silk Mills' Sasmira Marg, 022-24935351-52 Dr. U.K.Gangopadhyay, [email protected] /
Research Association, Mumbai Worli, Mumbai - 400 Executive Director [email protected]
(SASMIRA) 030.
5 Man-Made Textile Research Man-Made Textiles 0261-2323211 Dr. S.K. Basu, Director [email protected]
Association, Surat (MANTRA)* Research
Association, Near
Textile Market,
Telephone
Exchange,
Ring Road, Surat -
395002
6 Wool Research Association, Wool Research 022-25868398 Dr. S. Rahman [email protected]

Thane (WRA)* Association (WRA), & Dr. Mrinal Choudhari ail.com
PO Sandoz
Baug,Kolshet Road,
Thane-400607
7 Bombay Textile Research The Bombay Textile 022-62023636 Dr. T. V. Sreekumar [email protected]
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Association in Mumbai (BTRA)* Research

Association (BTRA),
LBS Marg,
Ghatkopar (W)
Mumbai – 400 086.
8 Northern India Textile Research Northern India 0120-2807390-95 Dr. Arindam Basu [email protected]
Association, Ghaziabad Textile Research [email protected]
(NITRA)* Association (NITRA),
Sector 23, Raj
Nagar, Ghaziabad -
201 002.
* Participated in the primary survey for the present study.
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Annexure 16
Important funded / sponsored projects undertaken by TRAs (2015-2020)
ATIRA
• Textile Reinforced Precast Panel (MT- 62)
• Setting up Focus Incubation Centre (Mini Mission II of Technology mission on technical textiles)
• Scheme for promoting usage of Geotechnical textiles in North Eastern region
• Execution of 20 projects on application of Geotextile related to roads, water reservoir and hill slopes in North east states
(Manipur, Tripura, Mizoram, Meghalaya and Arunachal Pradesh)
• Development of nano fibres based water filter to get safe and pure drinking water for human beings (MT -63)
BTRA
• Studies on effect of plasma treatment for adhesion improvement of coated technical textiles
• Nano fibre application to enhance the anti-clogging properties of geotextiles
• Preparation of nano fibre based protecting clothing against chemical warfare agent
• Development of cotton waste based oil absorbent for oil spill clean-up
• Atmospheric pressure plasma treatment for enhancing the conducting properties of textiles doped with intrinsic conducted
polymers
• Development of test method for analysing Hexavalent chromium content in dyes, pigment and textile auxiliaries
• Development of electronic servo control industrial TFO twister for heavy denier filament yarn
• Melt spinning of PVDF / ZnO nanostructure hybrid filament for wearable smart textile
• Analysis of eco-management in Indian textile processing industry
• Studies of radiation induced modification of textile materials
MANTRA
• Effect of structural parameter of fibres and fabrics on properties of nonwoven fabrics.
• Development of protective work wears (gloves, socks) for leptospirosis protection for farm & field workers.
• Development of highly electro-conductive non-metallic textile for sensing application and EMI shielding
• Development of infrared emitting therapeutic fabrics made from thermo- reactive minerals embedded PET filament yarn
• Development of new value added polypropylene spunbond fabrics by coating and finishing application to improve functionality
and usage
NITRA
• Development of electronic drape meter based on image analysis technique
• Development of fabric smoothness tester
• Development of smart protective textiles for fire fighter, soldier and old-age people
• Development of protective work-wear for cement porters
• Development of multi layered flame & thermal resistant fabric for fire fighter clothing
• Development of value added products from different fibres in Himalayan region
• Development of improved version of body protector used for riots control
• Development of air cleaner as home textiles to reduce indoor air pollution
• Development of technical textile products in the field of feminine hygiene
SITRA
• Development of a heat and moisture exchange filter
• Development of testing instrument – splash resistance tester and fluid handling capacity tester
• Development of implantable product – anterior cruciate ligament & vascular graft
• Development of indigenous breathable viral barrier fabric
• Development of nanoparticle based transdermal patches of selected cardiovascular drugs
• Design and fabrication of an instrument to assess the puncture resistance of surgical material by using sharp edge puncture
probe/syringe needles
• Development of novel bio – degradable adult incontinence device
• Development of total comfort index paradigm for textile structures (sportswear, surgical gown & hotel bed linen)
• Development of eco products – eco clothing & water repellent finishing device
• Development of reusable, biodegradable coverall and antioxidant cosmetotextiles
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
WRA
• Development of innovative sportech products such as sailing clothes, ballooning fabrics, high adventure sportswear etc. Using
low energy, environment friendly hot melt application for new entrepreneurs in sportech sector
• Enhancement of moisture management properties of polyester, polyester/cellulose blend by surface modification using
cellulose micro particles
• Design & development of evaporative cooling textiles
• Development of sports gears (inner wears, socks, bands, leggings etc.) with controlled release microencapsulated natural
essential, herbal oils for therapeutic benefits including protection of health, skincare and recovery of injuries and hygiene of
sportsperson.
• Synthesis of optical whiteners with good photostability and improvements in the bleaching processes to produce photostable
bright white and pastel shades woollen casual fashion knitwear, sports and leisurewear products and carpets using indian and
other cheaper imported qualities of wool
• Development of active fitness clothing like gym and yoga wear with infra-red thermal reflecting property to enhance body
fitness
• Design and development of sportswear and sports accessories having thermo physiological comfort properties in order to
enhance the performance assessed by using a sweating thermal manikin system under different environmental conditions
• Design and development of light weight and high impact resistance sports goods
SASMIRA
• Smart shade-net through auto-regulation of thermal and light radiation
• Development of multi-purpose shade net for water harvesting
• Design and development of an instrumental set up for measuring the wind blockage percentage of horticultural wind break
nets
• Development of next generation thermo chromatic thermoregulatory agrotextiles for horticulture application
• Development of high strength cost effective seamless technical circular fabric from heavy denier multifilament yarn
• Design & development of a digital instrument for measuring the thermoregulatory properties of textiles
• PP/ /Jute hybrid mulch mat for moisture and temperature management in horticulture application
• Development of biodegradable agrotextile products for horticulture application using keratin based waste products
• Biological synthesis of bio-degradable textile polymer
• Biotransformation of naturally occurring phenolic compounds for development of eco-friendly flame retardants (FR) for
imparting functionality to textiles
• Establishment of methodology for green processing of cotton using supercritical carbon dioxide technology
• Design and development of low cost reusable sanitary pads for Indian women
IJIRA
• Development of eco-friendly fibre lubricant in jute processing
• Production of jute-ramie blended fine yarns and fabrics
• Braided jute sapling bags as substitute of poly nursery sapling bags
• Low cost, light weight jute bags for packing food grains and sugar
• Development of moisture meter, autoleveller, sliver grist monitor, electronic jute yarn testing tester and brightness-cum-cover
factor meter

For SASMIRA and IJIRA, data has been extracted from secondary sources.
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Annexure 17
Important In-house projects undertaken by TRAs (2015-2020)
Buildtech & Geotech

• Experimental investigation of strengthening of basalt fibre reinforcement polymer composite bars (Buildtech)
• Treatment of khadi cotton fabric with herbal extract for developing reusable baby diapers (Geotech)
Meditech
• Development of cellulose nanocrystals, bio composite, bacterial cellulose, keratin substrates, nano composite hydrogel, natural
tannins for eco coloration & cellulose fibre for oil water separation
• Development of cellulose nano crystal films, cellulose and chitosan based sponges and eco mordant
• Design and fabrication of POSEAT, SIDS monitoring & TREMOR suppression system
• Characterisation of baby diapers and surgical gowns
• Development of eco-friendly natural dyes
• High performance laparotomy sponge, atraumatic wound dressings, cardiovascular drugs
• Design and fabrication of BFE, dry and wet bacterial penetration tester
• Development of testing method for disposable diaper, herbal incorporated sodium alginate nano membrane and biodegradable
ADL
• Effect of antimicrobial coated medical textiles
• Characterisation of tea bags & natural dyes
• Development of metallic hydrogel, facial sheet mask
• Top sheet with improved moisture management property, and low lint generation property
Oekotech
• Development of cellulose nanocrystals, bio composite, bacterial cellulose, keratin substrates, nano composite hydrogel, natural
tannins for eco coloration & cellulose fibre for oil water separation
• Development of Cellulose nano crystal films, Cellulose and chitosan based sponges and ECO mordant
Protech
• Development of work wear for electroplating workers
• Development of suitable workwear for workers of oil and gas industry
Sportech
• Synthesis of optical whiteners with good photo stability and improvements in the bleaching processes to produce photostable
bright white and pastel shades woollen casual fashion knitwear, sports and leisurewear products and carpets using Indian and
other cheaper imported qualities of wool
• Development of active fitness clothing like gym and yoga wear with infrared thermal reflecting property to enhance body
fitness
• Design and development of sportswear and sports accessories having thermo physiological comfort properties in order to
enhance the performance assessed by using a sweating thermal manikin system under different environmental conditions.
• Design and development of light weight and high impact resistance sports goods.
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Annexure 18
Important consultancy projects undertaken by TRAs (2015-2020)
ATIRA
• Develop quick dam flood barrier PP sand bags
• Develop polypropylene soil bag fabric development to use stacked soil bags to repair work of small earth dams
• Glass fabric lamination with aluminium foil
• Development of nanofibres based membrane for air filtration, thermal insulation fabric and antimicrobial fabric
• Design and fabrication of tools and die system
NITRA
• MDRS-14 (modernisation)
• Manpower assessment study
• TEV study & valuation of fixed assets
• Machinery maintenance audit
• Technical specification on sanitary napkin
• Quality optimisation of cotton wool roll
• Development of antimicrobial finish with microencapsulation technique
• Development of surgical facemask
WRA
• Developing conductive yarns on friction spinning system to provide thermal insulation.
• Developing the high altitude jackets
• Developing coating products using hot melt pressure sensitive adhesive on hot melt laminating and coating machine.
• Development of coated fabrics on hot melt laminating and coating machine.
• Development of a flame retardant fabric samples of 100% PBI filament
• Development of breathable coated textiles
• Development of coated fabrics on hot melt laminating and coating machine.
• Development of coating products with negative ion finishes
• Chemical finishing for friction less yarn
• Developing friction spun yarn from viscose waste
SASMIRA
• Consultancy for the laboratory set up for BIS accreditation of insect net product
• Consultancy for the laboratory set up for BIS accreditation of shade net product

For SASMIRA, data has been extracted from secondary sources.
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Annexure 19
List of some important training programmes/workshops organised by TRAs
(2015-2020)
Composites
• Composite Training covering:
o Non-destructive testing method
o Composite testing mechanical properties
o Training on composite and its application
o Technical textiles
o Interactive workshop on application of geotechnical textile in various constructions in the north east region of India
o Importance of testing of geotechnical textile for designing
o Pultrusion
o Composite training
o TRC modular toilet training
o NDT training
o Geotextile testing – hands on experience
o Electrospinning for nanofibre production & its application
o Processing of composites and testing
o Textile processing
o One day workshop on Geotextile in Civil Engineering
• Practical training programme in pultrusion process
o Training in composites material
o Application of geosynthetic textiles in the construction of roads, slopes & water reservoirs
o Advance technologies to mitigate the issues of national highways, landslides & reservoirs in North-East region
o Improvement of highway infrastructure and slope protection measures in NER with innovative concepts
o Next frontiers in civil engineering: sustainable & resilient infrastructure for North East region
o Sustainable construction materials and technologies for infrastructure development in North East region
o Recent advances in engineering & technology for infrastructure development of North East Region
• Applications and testing facilities at ATIRA for Geotextiles in roads in Gujarat
• Application of Geotextiles in canals and dams
Indutech
• Opportunities for new entrant in technical textiles sector
• Product variants in technical textiles with special reference to small scale industrial sector
• Manufacturing, characterisation and application
Meditech
• EDP in medical textiles training programme
• Healthcare medical textiles training programme
• Hygiene textiles training programme
• Hands on training in medical textile products manufacturing & characterisation
• Awareness training programme on opportunities in medical textile segment
• Faculty development training programme on entrepreneurship in medical textiles
• Three days national workshop on hygiene products : raw material, product development and quality control
• Seven days short term course on medical textiles
• National level workshop on antimicrobial evaluation of medical textile products
• National level workshop on characterisation of medical textile products
• Nanofibres based wound healing bandages for Dr. L. H. Hiranandani College of Pharmacy – Ulhasnagar
• Coating of fire retardant materials on woollen fabric, for UDCT, Jalgaon students
• Protective gears for leptospirosis developed
Protech
• Workshop on "Protective Textiles: Present scenario and future prospect"
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
• Lecture on "Ballistic Textiles"

• Training programme for procurement officers of border security force on "QRS Specifications/lnspection procedure and
Testing/Quality Control of textile materials"
• Workshop on " Cement work-wear, colour difference of work-wear and water vapor permeability study of coated material"
• Workshop on "Automotive textiles: conventional and value added products"
• Workshop on "The use of technical textiles in automotive industry"
• Training on technical textiles and CAD
• Presentation on "Personal protection textiles"
Sportech
• Five days faculty orientation, training and development programme for National Institute of Fashion Technology (NIFT)
• TiO2 nanoparticles finishes on cotton fabric for UV protection and antimicrobial activity for “SNDT Women's University, Mumbai
• Basic course on “knitting & textile testing”
• One week practical training on wool technology & testing
• Basic course on “knitting & textile testing”
• A two day workshop on sport technology was conducted at Shree Guru Gobind Singhji Institute of Engineering & Technology,
Nanded, Maharashtra
Other Segments
• Three days training programme on “Textile testing & woollen carding”
• Training for Ethiopian staffs from Ethiopian textile industry development institute (ETIDI'S) on the sportech
• Two week training programme for ICT faculty at COE
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Annexure 20
List of some international and national conferences, seminars and symposiums
organised by TRAs (2015-2020)
ATIRA
• PTFE Nano-fibre based filter media
• Textile Reinforced Concrete
• Importance of testing of geotechnical textiles selection for designing
• Activities in technical textiles & composites VASTRA – 2015
• PU pultrusion application in Indian market
• Technology & Global Benchmarking: Standards and testing of Geotextile
• Antibacterial & pollution face mask using silver coated nanofibre web
• Nano fibre based portable water filter bottle
• Nano electrospinning at ATIRA and its application
BTRA
• Disruptive innovation and textile future
• Joint Technology Conference (2017)
• Buyers / Sellers seminar with special reference to geotextile (2015)
• D35 meeting on testing standard & application of geosynthesis (2015)
NITRA
• Seminar on " Protective Textiles in India and its future"
• Seminar on "Ballistic Textiles and Fire Fighters' Suits"
• Seminar on "Personal Protection Textiles"
• 58 Joint Technological Conference
• Tech-Tex 2019
SITRA
• National level workshop on antimicrobial evaluation of medical textile products
• National level workshop on characterisation of medical textile products
• National level conference on medical device rule – 2017
• Three days national workshop on hygiene products : raw material , product development and quality control
• Workshop on emerging opportunities in medical textiles
• Technology gap assessment of surgical dressing manufacturing cluster
• Emerging opportunities in technical textiles for knitwear industries
• Workshop on investment opportunities in technical textiles with special focus on medical textiles
• Meditex – 2018 exhibition , Mumbai
WRA
• National Seminar on "New Trends in sportswear for improving performance of sport person" was organised by Wool Research
Association, Thane COE in Sportech & LNIPE NERC, Guwahati at Guwahati on 27th June, 2017
• “Technological advancement in the “Sportwears and sport footwear” at Sports Authority of India, Bangalore on 28th June,
2017
• Wool Research Association organised a half day seminar titled “seminar on sportech” at Sports Authority of India, Gandhinagar
on 29th June, 2017
• Q-Lab Corporation (USA) and Venture Technologies along with WRA’s COE –Sportech had organised a seminar on “Colour
Fastness to Light & the Importance of Standards in Textiles” at Ramada Powai Hotel & Convention Centre, Saki Vihar Road,
Mumbai on Thursday, June 30, 2016
• National Conference organised by Wool Research Association & Institute of Chemical Technology at ICT, Matunga On
“SPORTECH – An Ocean of Opportunities”, in collaboration with office of The Textile Commissioner, Mumbai on March 15, 2016
at Institute of Chemical Technology, Mumbai
• Awareness programme on ‘Sportech’ at Textile Research & Application Development Centre (TRADC) Aditya Birla Science and
Technology Company Pvt. Ltd. was conducted at Textile Research & Application Development Centre (TRADC) on 8th & 9th
September 2015
SASMIRA
• Holistic alternative to enhance yield and profitability of Horticulture and Agriculture
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
• Management Perspectives to Agribusiness

• One day seminar on “Agro textiles: Holistic alternative to enhance yield and profitability of Horticulture and Agriculture" on
2014 April 2018 at Upper Shillong, Meghalaya
• One day seminar on “Agro textiles: Holistic alternative to enhance yield and profitability of Horticulture and Agriculture" on
23rd April 2018 at Tezpur, Assam
• Seminar on “Sustainable Textiles: A Way Forward” at SASMIRA, dated 16 November 2019
• One day conference on “Investor conclave manufacturing opportunities; challenges luggage; bags industry in India”, dated 19
November 2019 in collaboration with UKSL

For SASMIRA, data has been extracted from secondary sources.
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Annexure 21
Some technology transfers related to technical textiles by TRAs
(2015-2020)
ATIRA
• CFRP Triangular Core
BTRA
• TFO project
MANTRA
• Effect of structural parameter of fibres and fabrics on properties of nonwoven fabrics
• Development of protective work wears (gloves, socks) for leptospirosis protection for farm & field workers
NITRA
• License to manufacture "NITRA electronic drape meter"
• Development of protective work wear for cement porters
• License to manufacture "NITRA Smoothness Tester"
• Development of multi-layered flame & thermal resistance fabric for fire fighter clothing
• Technology on development of stab and impact resistant material for anti-rots body protector
• Synthetic blood penetration tester
SITRA
• Nano finished fabric for manufacturing surgical gown
• Collagen coated hernia mesh
• Nonwoven based laparotomy sponge
• SITRA splash resistance tester
• Technology of dry bacterial penetration resistance tester
• Technology of SITRA blood penetration resistance tester
• Viral penetration resistance tester
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Annexure 22
Important Instruments/ Machines/ Technology developed by TRAs
(2015-2020)
Buildtech
• TRC modular toilet
Geotech
• Development of water permeability tester for nonwoven
Hometech
• Atmospheric pressure Plasma
Meditech
• Leukodepletion Blood Filter
• Anterior Cruciate Ligament
• Polyester Vascular Graft
• Honey based wound care products
• Breathable Viral Barrier (BVB) film
• Transdermal patch
• Development of N99 filter media for face mask using silver coated nanofibre web
Other Segments
• Development of CFRP based component for Satellite application
• Triangular Core Manufacturing Technology
• PP tough sheet development for sport gear application
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Annexure 23
Technical Textile related machines and equipment installed by TRAs (2015-
2020)
ATIRA
• Curing Oven
• Hydraulic Press
• Resin Impregnation Plant
• Loading and Unloading Unit
• Braiding Machine
• Curing Oven
BTRA
• Hydroentangle Nonwoven
• Electro spg
• Plasma atm pressure
• X ray diffraction
• NIR spectroscopy
• Multi-station tensile tester
• Porometer
• Laser thermal conductivity tester
• In-plane water permeability tester
IJIRA
• Electronic Moisture Meter
• IJIRA sliver grist monitor
• IJIRA fabric cover factor tester
• IJIRA fabric stiffness tester
• Fibre parallelisation tester
• Auto leveller in Finisher card
• Tensile tester for jute yarn / fabrics – Tensojute
• Raw jute bundle strength tester
• IJIRA jute lustre and brightness meter
• IJIRA impact strength tester
MANTRA
• Agro-net knitting machine
• Pilot Coating machine
• Pilot Hot melt laminating machine
• Plasma machine
• Needle punch machine
• Hydro entangle machine
• Spun bond machine
• Gas Chromatography-Mass Spectrometry
• Cold Crack Tester (COE Agrotech)
• Dust Filter Test Rig
NITRA
• Gas Chromatograph Mass Spectrometer
• Flammability Test Ring with Accessories
• DSC & TGA Machine
• Set of Temperature Chamber for UTM
• Crumple Flex Tester
• Seam Fatigue Tester
• M-286, Umust Wettability Tester with 4Eextruders
• Medical Mask Breathability Tester
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
• Synthetic Blood Penetration Tester

• Dry Microbial Penetration Tester
SITRA
• Circular weaving machine for making vascular graft
• Chain Stitch machine
• Ultrasonic welding machine
• High voltage generator for setting up electro spinning
• Ultrasonicator
• Syringe pump
• Ultrasonic spot welding machine
• Freeze dryer
• SITRA Splash Resistance Tester
• SITRA Fluid Handling Capacity Tester
• Dry Bacterial Penetration Resistance Tester
• Heavy duty sewing machine
• Bacterial Filtration Efficiency Tester
• SITRA Blood Penetration Resistance Tester
• SITRA Viral Penetration Resistance Tester
WRA
• Atomic Force Microscopy (AFM)
• Hot Melt Laminating & Coating machine
• Evenness tester
• Sweating Thermal Mannequin
• Warp Knitting Machine (Raschel)
• Warp Knitting Machine (Tricot)
• Chamber for Sweating Thermal Manikin
• FTIR Spectrometer
• ICP-OES

For IJIRA, data has been extracted from secondary sources.
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Annexure 24
Directory of Centres of Excellence for Technical Textiles in India
Designated COE Phone

Address email ID Contact Person
Institution Segment(s) Number
Ahmedabad Textile Ahmedabad Textile Industry’s 079-

Industry's Research Research Association (ATIRA), Mr. Pragnesh Shah, 26305131,
1 Composites [email protected]
Association (ATIRA) P.O. Ambawadi Vistar, Director 26305132,
* Ahmedabad – 380015 26303363
The Bombay Textile The Bombay Textile Research

director@btraind
Research Geotech & Association (BTRA), LBS Marg, T. V. Sreekumar,
2 ia.com 022-62023636
Association Oekotech Ghatkopar (W) Mumbai – Director
com
(BTRA)* 400086.
The South India South India Textile Research

[email protected] 0422-
Textile Research Association (SITRA), Post Dr. P. Vasudevan,
3 Meditech g.in 25743679,
Association Box No. 3205, Aerodrome Post, Director
gmail.com 4215333
(SITRA)* Coimbatore – 641014
0120-
drabasu@nitrate
Northern India 280739095,
Northern India Textile Research xtile.org,
Textile Research Protech & Dr. A. Basu, 2783586,
4 Association (NITRA), Sector 23, mail@nitratextile
Association Mobiltech Director General 2783592,
Raj Nagar, Ghaziabad -201002 .org
(NITRA)* 2783638,
.org
2783095
Synthetic & Art Silk Mills

Synthetic & Art Silk Dr. U.K.
Research 022-
Mills' Research Agrotech & [email protected] Gangopadhyay,
5 Association 24935351,
Association Packtech Executive
(SASMIRA)SASMIRA Marg, 24935352
(SASMIRA)* Director
Worli, Mumbai – 400025
Man-Made Textiles
Near Textile Market, Telephone
Research Nonwovens director@mantra Dr. S. K. Basu,
6 Exchange, 0261-2322500
Association machinery surat.org Director
Ring Road, Surat - 395002
(MANTRA)*
Indian Jute
Jute Industries' Research
Industries'
Jute Geo- Association [email protected] Dr. A. K. Sharma,
7 Research 033-66269200
textiles 17, Taratala Road, g Director
Association
Kolkata - 700088
(IJIRA)*
Wool Research Association

[email protected]
Wool Research (WRA), PO Sandoz Dr. M. R. Choudhari
8 Sportech om 022-25868398
Association (WRA)* Baug,Kolshet Road, Thane- Joint Director
ail.com
400607
pvkadole@gmail. 0230-
D K T E's Textile & Rajwada, P.O.Box. No.130, co Prof. C.A. Patil, 2421300,
9 Engineering Nonwovens Ichalkaranji-416 115 Dist: m Head, Centre of 2439557,
Institute* Kolhapur (Maharashtra) India dktestextile@gm Excellence 2439558,
ail.com 2439559,
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
2432340
PSGTECHS COE INDUTECH, Dr. G. Thilagavathi, 0422-

PSG College of Hometech & info.int@psgtech
10 Avinashi Road, Neelambur, Prof. & Head, 3933250,
Technology* Indutech .ac.in
Coimbatore- 641062 Department of 39332252
Textile Technology
Prof. R.S.
Department of Textile and Fibre Rengasamy, Prof. &
Indian Institute of Engineering, Indian Institute of hodtextile@admi Head,
11 Protech 011-26591401
Technology Delhi Technology Delhi, Hauz Khas, n.iitd.ac.in Department of
New Delhi, Delhi 110016 Textile and Fibre
Engineering
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Annexure 25
Technical textiles testing facilities provided by COEs
Standard test methods

S.No. List of the products tested List of the properties tested
used in testing
Sportech
Sportswear, protective clothing, high To measure thermal properties and water vapour ISO 11092
1 altitude clothing resistance under steady state conditions using ASTM F1868
Sweating Guarded Hotplate GB 11048
General textile wear, Knit and non- To measure the dynamic liquid transport properties
2 woven textile fabrics, sportswear, of knitted and woven fabrics using Moisture AATCC 195
protective, breathable fabrics Measurement Tester
ISO 15496,
Coated fabrics such as sportswear, To measure the Water Vapour Transmission Rate
BS 7209
3 protective clothing, high altitude Using Water Vapour Transmission Rate Tester
clothing etc. raincoats, tents etc ASTM 1868
ASTM F1291
Scientific testing of thermal environments without ASTM F 1720
Sportswear, protective clothing, high
4 the risk or inaccuracies inherent in human subject ASTM F2370
altitude clothing, sleeping bag
testing using Thermal Manikin EN 13537
ISO /DIS 15831
BS 5438
General Apparel fabrics, Vertically Flammability resistance of vertically oriented fabrics ISO 6941
oriented fabrics such as curtains,
5 using AutoFlamm Flammability Tester BS 5866
drapes and blinds, night wear
products, Personal Protective Clothing ISO 6940
DIN 66080
To determine minimum oxygen concentration,
Textile materials, fabrics, plastic and expressed as %, that will support for continues IS 13501
polymer materials solid, laminated or combustion of materials
6 ISO 4589-2
cellular materials, flexible sheet or film
Using Limiting Oxygen Index Test Apparatus ASTM D 2863
materials
To measure toxicity index of coated textiles & other

Textile fabrics, non-woven, chemical materials using Toxicity Index Tester
7 NCD‐1409
coated fabrics, automotive textiles etc
AS/NZS 4399:1996
UV finished textile fabrics such as To measure the UV Protection properties of AATCC 183:2010
8 garments, swim wear, parachutes fabric/textiles under UV Spectrum using UV -
fabrics, sailing cloth, tent etc Spectrophotometer EN 13758-1:2002
GB/T18830:2009
AATCC 119 AATCC 120
ASTM D3514
ASTM D3885
ASTM D3886
FORD EFB15J2
Fabrics used in clothing, footwear and Determines the wear and abrasion resistance of FORD BN112-01
9 industrial applications fabrics used in clothing, footwear and industrial FTM S 191
fabrics using Universal Wear Tester FTM S 5300
FTM S 5302
WSP 020.1.R3 (12)
WSP 020.2.R3 (12)
IST 20.1 (01) 3.1
IST 20.2 (01) 3.9
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
ASTM D737
Parachutes fabrics, Sailing cloth, Tent, To determine the resistance of fabrics (woven, BS 5636
Air bags, Active wear, untreated & knitted and non-woven textile materials) to the EDA NA 140.1
10 treated fabrics materials such as
passage of air using Air Permeability Tester DIN 53887
woven, non-woven, blankets, and
knitted fabrics. JIS L 1096-A
EN ISO 9237
Composites
ASTM D638
ASTM D3039
Tensile Test
ISO 527
IS 1998
ASTM D790
Flexural Test ISO 178
ISO-14125
Bending Test of complete section UDL, LDL
Bearing test ASTM D953
ASTM D790
Compression test
ISO-14126
ASTM D256
Izod Impact strength
ISO-180
Charpy Impact test ISO-179
ASTM D3763
Drop impact testing
ISO-6603
ASTM D785
Rockwell Hardness
ISO-3039
Barcol Hardness ASTM D2583
ASTM D2344
ILSS
ISO-14130
Inplane shear ASTM D3846
FRP composite products/sample
ASTM D3039
11 Poisson’s ratio
ISO-527-4
Cross breaking strength ASTM D1938
ASTM D648
HDT
ISO-75
Glass fiber content by volume fraction ASTM D2584
Density ASTM D792
ASTM D1525
Fire Resistance
ISO 306
UL 94/ASTM D 635
Horizontal/Vertical flammability IS 6746:1994 Clause 4.4, IS
11731 (Part 1 & 2), ASTM
D4986, ISO 9772
ASTM D 2863
LOI ISO 4589-2
ISO 4589-3
NES 713
Toxicity Index
NCD-1409
BS 6401
ASTM E662
NBS Smoke Density ASTM F814
Chamber NFPA 258
ISO 5659-2/IMO FTPC Par-2
ATS 1000.001/ ABD0031
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
NES 711
Flooring Radiant ASTM E 648 & ISO 9239-1,
Panel ASTM E 970, NFPA-253
Cone Calorimeter ISO 5660 & ASTM E 1354
Spread of ISO 5658 Part 2 & 4, IMO

Resolution A.653 (16); ASTM
Flame E 1317; ASTM E 132
DSC ASTM E1356
EN ISO 11925-2, UIC-564-2,
Single flame Source test
Appendix-5
ISO-4569, ASTM D2863, IS
Limiting Oxygen Test
13501, IS 13660
Elevated temperature oxygen test ISO-4589-3
Full section test
CTI-137
Breaking strength
Jute Geotextile
Determining apparent opening size ASTM D 4751
Mass per unit area (weight) ASTM D 3776
Jute geotextiles
12 Thickness ASTM D 5199
Water permeability ASTM D 4491
Wide width tensile strength ASTM D 4595
Dynamic core penetrometer ASTM D 6951
Soil
13 California Bearing Ratio ASTM D 1883
Liquid limit, plastic limit and plasticity index of soil ASTM D 4318
Nonwovens
14 Thermal Insulator Thermal Conductivity Test ISO 8301: 2010
UV Accelerated Weathering Test
ASTM D 4355
15 Nonwoven Geotextile Tensile Strength
ASTM D3786
Bursting Strength
16 Non-woven filters Stiffness test ASTM D 5732 -95.
17 Coated woven textile Hydrostatic water head EN ISO 20811
ASTM E 1294-89
18 Mask fabric / Filter fabrics Pore Size of fabrics
ASTM F316-03
19 Textile material Thickness Test ISO 9073-2
Liq. strike-through time by
Diaper cover stock EDANA/INDA-standards
20 Liquid Strike-Through
WSP70.3, Wet back by
EDANA/INDA stds WSP 80.10
21 Nonwoven geo bag Tensile Strength ASTM D 4595
22 Flexible Heat-Sealed Packages Water Vapor Transmission ASTM D 4716-87
Spun bond non-woven fabric for UV Accelerated Weathering Test ASTM D 4355-
23
different application Tensile Strength IS 15891 (Part 3): 2011
Agrotech & Packtech
Breaking strength, Color fastness, Bursting Pressure, IS 16008 : Part 1 : 2016
24 Shade-net
Haze Percentage IS 16008 : Part 2 : 2016
Mass, Tensile strength, Tear strength, Air
Woven Ground Cover/ permeability, Index puncture resistance, UV
25 IS 16202 : 2014
Mulch Mat accelerated exposure testing, Water permeability,
Water vapour permeability
Mass, Cover factor, Breaking strength, Retention of
26 Insect Protection Net breaking strength after UV exposure, Bursting IS 16513 : 2016
Strength, Air permeability
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Standard Formulation in
process
27 Anti-hail net
In house method is being
used
process
28 Bird protection net
used
29 Wind Shield IS 17356 : 2020
Length, Mass, Width, Thickness, Tensile strength,
Elongation, Trapezoid tear strength, Air permeability,
30 Banana Bunch cover UV Stability, Index puncture resistance, Water IS 16718 : 2017
absorption capacity, Colour, Ash content, Water
vapour permeability
31 Pond Liner IS 15351 : 2008
Mass, Breaking strength, Elongation at break,
Welded seam strength, Tear strength, Puncture
32 Vermicompost bed strength, Environmental stress cracking test, IS 15907 : 2010
Resistance to chemicals, Colour fastness and
Bursting pressure
process
33 Plant support net/rope
used
Mass, Average breaking strength, Retention of
34 Harvest Net breaking strength after UV exposure, Colour fastness IS 17357 : 2020
to artificial light, Bursting pressure, Air permeability
Length, Mass, Width, Thickness, Tensile strength,
Elongation, Trapezoid tear strength, Air permeability,
35 Crop Cover UV Stability, Index puncture resistance, Water IS 16718 : 2017
absorption capacity, Colour, Ash content, Water
vapour permeability
Mass, Thickness, Tear strength, Bursting Strength,
36 Jute Agrotextile mulch Index Puncture Resistance, Air and Water IS 17070 : 2019
permeability
37 PP Spun bonded Nonwoven Mulch IS 17355 : 2020
Agrotextile Fencing Net Extruded
38 IS 17358 : Part 1 : 2020
Polymer Mesh
Agrotextile Fencing Net Made from
39 Mono Filament Yarns and Combination IS 17358 : Part 2 : 2020
of Tape and Mono Filament Yarns
Mass, Thickness, Open area, Dimensions, Water
40 Jute Agrotextile Sapling Bag IS 16089 : 2013
holding capacity and Tensile strength
High density polyethylene (HDPE)
41 laminated woven lay flat tube IS 16190 : 2014
Protech and Mobiltech

42 Pre-treatment after washes before FR test IS 15370-2A/ISO 6330-2A
43 Heat resistance ISO 17493 (180°C)
IS 15758 (Part 4)/ISO 15025:
2000 (A) /BS 5867/BS 5438-
44 Flame spread — Face ignition 1A
Flame, Heat, Electric & Thermal
BS 5438-2A
Resistance
BS 5438-3A
IS 15758 (Part 4)/ISO 15025:
Flame spread — Edge
2000 (B)/BS 5867/BS 5438-1B
45 ignition
BS 5438-2B
BS 5438-3B
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
46 Impact of spatter (up to class-2) ISO 9150

47 Electrical resistance EN 1149-2
48 Convective heat IS 15758/(Part 1)/ISO 9151
49 Radiant heat IS 15758 (Part 2)/ISO 6942
Molten Aluminium Splash
- up to D1
50 ISO 9185
-up to D2
-up to D3
Molten Iron Splash
-up to E1
51 ISO 9185
-up to E2
-up to E3
ISO 12127
52 Contact Heat —Heating cylinder
Sweating guard hot plate

ISO 11092 test
-Thermal Resistance (Rct)
53 (Ret can also be tested as per
-Water vapour resistance
ASTM F 1868 Part B)
(Ret)
Limiting Oxygen Index -Fabric
IS 13501/ASTM D 2863/ NCD
54 -Nonwoven, plastic, wood
14510
Etc
Vertical Flammability test IS 15061 Annex B/11871
55 - IS 15061 Method A
- IS 11871/ BS 5438
IS : 11871 Method-B/ASTM
Inclined Flammability Test
56 D1230/
AATCC-33
Horizontal Flammability
57 IS 15061 Annex AIFMVSS 701
Test
BS 6307/ASTM D 2859/NFPA
58 Methenamine Tablet test
101
59 Cigarette test (Source zero) BS 5852
60 Small Flame test (Source 1) BS 5852
Fire test
61 -NFPA 701 Method 1 NFPA 701
-NFPA 701 Method 2
NFPA-2112, ISO 17492, NFPA
1971, NFPA 1981, ASTM F
Thermal Protective
62 2700,
Performance Test (TPP / HTP)
ASTM 2703 (For contact &
Space both)
63 Surface Flammability Test ISO 5658-2/ IMO A 653
64 Heat resistance Hot Air Oven
65 Humidity Resistance Humidity chamber
Colour performance —
66 Chromaticity coordinates IS 15809/BS EN 20471
and luminance factor (Normal state)
Colour performance —
67 Chromaticity coordinates IS 15809/BS EN 20471
High Visibility Clothing
and luminance factor (After Xenon test)
Photometric for retro-reflective material (Normal
state)
68 IS 15809/BS EN 20471
-Chromo city
-Retero reflection
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Photometric for retro- reflective material (After

exposure to Abrasion,
69 IS 15809/BS EN 20471
Flexing, Temperature variation, Washing, Cold fold,
Dry cleaning, Rainfall)
GME 60292/SAE J 1885/TSL
Colour Fastness to Light (Xenon Arc) 3600 G/
-One sample TSL 0601 G/MS —300-
70
-For two samples 35/AATCC 16 H/JASO M 403-
-More than three samples 83/HES D 6601/JASO M
346/EDS-T-7415/GM 9538P
Colour definition
71 Using CCM
( XYZ & L a b Values )
Abrasion Resistance (Taber Type)
Abrader Wheel (CS-10, H-18, H-22 &
SAE J1530 —A, SES N 3246,
H-38)
72 JASO 403, SAE J948, MS 300-
Upto 1000 Cycles
32 SES N 3298
Upto 1500 Cycles
Upto 2000 Cycles
SAE J 369, FMV SS 302, SES N
3245
73 Flammability HES D-6003, JASO M 313, GM
9070P
MS 300-8
74 Smell (Dry & Wet Condition) TSL 3505G, TSM 0505 G
75 Smell (40C- 95% RH X 400 HRS) TSL 3505G
HES D6507/MS 300-32/FMLT
76 Automotive Textiles Odor property
131-01
Fog Test
TSL 3608G/MS 300-54/TSM
-Fog Number
77 0503G/ EDS T 7694, FLTM BO
-Fog Percentage 116-03/SAE J 1756
-Attached mass
FLTM BN 107-01/JASO M 313
78 Colour Fastness to Crocking / Rubbing
EDS-T-7643
Dimensional change by Moisturing/ Immersion HES D 6506/JASO M 313-83
79
Shrinkage MS 300-32/FLTM BN 105-01
80 Dimensional Stability against Humidity MS 300-32
81 Dimensional Change by Heating HES D 6506/FLTM-BN-105-01
82 Water Resistance/Repellency HES D 6506/Ms 300-32
83 Resistance to Bleeding AN 101 - 01
84 Resistance to Bleeding AN 101 - 01
85 Resistance to Heat (100°c for 8 hrs)
86 Resistance to Humidity (40°C- 95% RH for 8 hrs)
87 Steaming in Autoclave (100°C for 1 hr)
TSL 3600 G/BN 107-01/FLTM
88 Colour fastness to Crocking
BN 107-01/MS 300-32
89 Soil Resistance ( Oil, Water and drop) Automotive standard
Geotech & Oekotech
90 Carbon black content ASTM D 1603
91 Environment stress cracking resistance ASTM D 1693
92 Melt flow index ASTM D 1238
Geomembrane Conformance Tests
93 Modulus of elasticity ASTM D 638/ D 6693
94 Puncture resistance ASTM D 4833
95 Tear resistance ASTM D 1004
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
96 Thickness ASTM D 5199/ D 5994

97 Tensile strength and elongation at yield and break ASTM D 638/ 6693
98 Carbon black content ASTM D 1603
99 Junction (Node) Strength ASTM D 6637
100 Melt flow index ASTM D 1238
Geonet & Geogrid Conformance
101 Puncture resistance-CBR ASTM D 6241/ ISO 12236
102 Tensile strength ASTM D 6637
104 Apparent opening size (AOS) ASTM D 4751
105 Grab strength & Elongation ASTM D 4632
106 Mullen Brust Strength ASTM D 3786
107 Permittivity ASTM D 4491/ ISO 11058
108 Puncture Resistance (Index) ASTM D 4833
109 Puncture Resistance (CBR) ASTM D 6241
Geotextile conformance tests
111 Trapezoid Tear Strength ASTM D 4533
112 Unit weight (Mass/Unit Area) ASTM D 5261/ ISO 9664
113 Wide-Width Strip Tensile Properties ASTM D 4595/ ISO 10319
114 Pore Size ASTM D 6767
115 Cone Drop Test BS EN 918/ ISO 13433
116 Bentonite Swell Index ASTM D 5890
Geosynthetic Clay Liner (GCL)
Conformance Tests
118 Unit Weight (Mass/Unit area) ASTM D 5993
Agrotech
Non-woven i) ASTM D-737
119 Air permeability
And Coated fabric ii) BS-5656
IS 7016
120 Tensile Strength & Elongation
Tensile tester (Part-2):1981
IS 7016
121 Tensile tester Tearing Strength
(Part-3):1981
122 Liquid Wicking Rate Test Kit Vertical Permeability to liquid without load EN ISO 11058
Water Vapour Transmission Rate
123 Water Vapour Transmission Rate Tester ASTM D-6701
Tester
Measures the amount of test liquid which runs down AATCC TM 42-2000
124 WIRA Run-off Test Kit
a non-woven test piece
125 Spray Rating Tester Resistance of fabric to surface wetting AATCC 22
126 Shower tester Resistance of fabric to artificial shower BS 5066:1974
Measures rewetting properties of non-woven cover EDANA 150.5-02 &
127 Cover Stock Wetback
stock EDANA 151.2-99
128 TOG Tester Thermal Resistance of continental quilts BS5335 Part 1
129 Taber Abrasion Tester Measures abrasion resistance of fabric by weight loss -
130 Vertical Flammability Tester Vertical flammability of fabric ASTM D 1230
131 Liquid Absorbency Time Test Kit Time required for complete wetting ISO 90736
Amount of liquid that specimen can hold after a
132 Liquid Absorbency Capacity Test Kit ISO 90736
period of immersion and drainage
Liquid Wicking Rate Test Kit Determines the rate of vertical capillary rise in a
133 ISO 5725
specimen strip suspended in a liquid
134 Surface Resistance Tester Electrical Resistance D 257
135 Film Thickness Tester Measures thickness of synthetic films, metal foils and DIN 53370 & DIN 55543
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
paper
Measures simple viscosity at a given speed or shear
136 Rheometer rate. Measures flow properties with a flow curve at a -
hear rate upto 1200 sec-1
Measures Static and Dynamic contact angle of any
fluid with fabric by sessile and captive method.
137 Contact Angle Meter -
Measures surface free energy, surface & interfacial
tension
Measures force, elongation, tenacity, preloading,
138 Vibrodyne tenacity at certain elongation, young modulus, work, DIN 51221 & DIN 53816
NDR of fibres
Measurement of PAR Value and Rate of
139 Photosynthetic Apparatus -
photosynthesis and related parameters
140 Dust Filter Test Rig Dust filtration efficiency -
Measures the length of time it takes for the adhesive ASTM
141 Shear Tester
sample to fail in shear mode D-3654
142 Flex Tester Flexing of Fabric -
143 Flex Tester Flexing of Fabric in cold environment (-5°c to -60°c) -
144 Computer Colour Matching (CCM) Computer Colour Matching -
145 Differential Scanning Calorimeter(DSC) Differential Scanning Calorimetry -
146 Hydrostatic Head Tester Water resistance ISO 811
Meditech
Impact penetration
Hydrostatic resistance
Synthetic Blood Penetration Resistance
Particle release
Moisture vapour transmission rate IS 17334
Tensile strength AAMI PB 70
148 Surgical gown/ drape
Bursting strength EN 13795
Viral Penetration Test EN 14126
Cleanliness–microbial (CFU/100 cm2)
Resistance to microbial penetration - Dry
Cytotoxicity
Irritation and skin sensitisation
Differential Pressure
Splash Resistance IS 16289
149 Surgical facemask Particulate Filtration Efficiency at 0.3 microns ASTM F 2100
Bacterial Filtration Efficiency EN 14683
Flammability
Length
Width
Thickness
150 Sanitary Napkin Absorbency IS 5405
Disposability
pH
For Top layer,

liquid strike through time
Wetback
Run-off
The tests are carried out in
151 Baby diaper For Core Material,
WSP, ISO 9073 standards
Free Swell Capacity
Centrifuge Retention Capacity
Absorption against Pressure
pH
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Wicking rate
Retention capacity
Absorbency
Absorbency before leakage
liquid strike through time
The test is carried out in WSP,
152 Incontinence diaper Wetback
ISO 9073 standards
Run-off
Free Swell Capacity
Centrifuge Retention Capacity
Absorption against Pressure
pH
Fibre identification
Yarn numbers
Threads per stated length
Weight per unit area
Minimum breaking load
Elasticity
Extensibility
Adhesiveness
Surgical dressings
153 Water Vapour Permeability IS 14944, BP standards
Water Proofness
Absorbency
Water Soluble substances
Ether Soluble substances
Colour fastness
X-ray opacity
Sulphated ash of surgical dressings
Water retention capacity
Yarn count
Warp yarn twist
Crepe bandage Threads/10cm
154 IS, BP, ASTM standards
Stretchability
Breaking load and
pH
Moisture management test
Moisture vapour Transmission Rate
Sports wears Air permeability
155 AATCC and ASTM standards
Tensile Strength
Tear Strength
Bursting Strength
Synthetic Blood Penetration Resistance Test
Coverall
156 Viral Penetration Resistance Test IS, ISO, ASTM standards
Resistance to Dry Microbial Penetration
Threads per inch
Pore area
Implantable products Tensile strength
157 IS, BP, ASTM standards
Bursting strength
Filament diameter
Knot pull strength
Hometech & Indutech
158 Filter bag / Media Tensile and elongation ISO 9073-3
159 Filter bag / Media Tensile and elongation DIN EN ISO 29073-1992-08
160 Filter bag / Media Taber Abrasion Resistance ASTM D 3884
161 Filter bag / Media Air permeability ASTM D 737
162 Filter bag / Media Capillary Flow Porometer ASTM D 6767
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
163 Silicon Coated Glass Fabric Tensile Strength EN ISO 1421

164 Silicon Coated Glass Fabric Tear Strength EN ISO 4674-1
Composite Materials, Foams, Non-
165 Thermal conductivity ISO 8301: 2010
Wovens, Mordants
166 Sound Insulation Materials SAC & Transmission loss ISO 10534 – 2: 1998
167 Rubber, Plastic, and Coated Fabrics Fogging characteristics ISO 6452: 2007
Textiles with Water Repellent and
168 Water Resistance: Hydrostatic Pressure Test AATCC 127 ,Method A: 2017
Water Resistance Fabrics
Flammability Testing,
Impedance Tube, Surface Resistivity Tester,
169 Technical textiles All relevant standards
Moisture Management, FESEM, FTIR, UPF, XRD,
Weatherometer
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Annexure 26
Companies using product development facilities and testing facilities of the
COEs
Name of the companies using Name of the facilities used (product development/ technical
S. No.
facilities textiles testing)
Sportech
Development of coated fabrics on hot melt laminating and coating

1 Bhavi Multifabs Pvt. Ltd, Navi Mumbai
machine
Ester Chemical Industry Pvt. Ltd., To develop coating products using hot melt pressure sensitive adhesive
2
Mumbai on hot melt laminating and coating machine
I-Design Engineering Solutions Ltd., Spinning of acrylic fibers on friction spinning system & development of
3
Pune woven and knitted fabrics
To develop Ethylene Propylene Diene Monomer (EPDM) rubber-based
4 Khosla Profils Pvt. Ltd., Mumbai
products on compression moulding machine
M/S Shreemati Nathibai Damodar
5 For developing the high-altitude jackets
Thackersey Women University, Mumbai
6 Tanishka Chemicals Products Ltd. Development and testing of Softener with fragrance
7 Chandak Expo International, Thane Process Line for the conversion of Kevlar waste into Yarn
8 Wacker Chemie India Pvt. Ltd., Mumbai Development of breathable coated textiles
9 Archroma Pvt. Ltd., Mumbai Chemical finishing for friction less yarn
10 Sarex Chemicals, Mumbai To develop coating products with negative ion finishes
Composites
11 Indian Space Research Organisation VIL, Braiding, Carbon weaving
12 Reliance Industries Limited Composite
13 Larsen & Toubro Ltd. Pultrusion and composite testing
14 Creative Carbon Pultrusion, Compression Molding and Resin Impregnation machine
15 Aeron Composite Testing
16 EPP composites Pvt. Ltd. Composite Testing
17 Tata Advanced Systems Limited Composite Testing
18 KK Spun India Limited Composite Testing
19 Advance Cooling Tower Pvt. Ltd. Composite Testing
20 CREST Composites and Plastics Ltd. Composite Testing
21 AH Wadia Composite Testing
Jute Geotextiles
22 Gloster Ltd. Jute Geo textile testing
23 Birla Corporation Jute Geo textile testing

24 Reliance Jute Mills International Limited Jute Geo textile testing
25 The Naihati Jute Mills Co Ltd. Jute Geo textile testing
26 Next to Nature Jute Geo textile testing
27 Aditya Translink Pvt. Ltd. Jute Geo textile testing
28 Ambica Jute Mills Ltd. Jute Geo textile testing
Nonwovens
29 Alok Industries Ltd. Testing Facility

30 Rex Polyextrusion Pvt. Ltd. Product Development and Testing
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
31 Hindoostan Mills Ltd. Testing Facility

32 Surya Textech Testing Facility
33 Sultanpure Textile Mills Pvt. Ltd. Testing Facility
34 Welspun India Ltd. Testing and Interested in Product Development
35 Pidilite Industries Ltd. Interested in Product Development
36 Bawane Group of Textiles Testing Facility
37 Silver Stitch, Mumbai Testing and Interested in Product Development
38 SVM Nonwovens Pvt. Ltd. Product Development and Testing
39 Millennium Starch India Pvt. Ltd. Testing Facility
40 Chodankar Systems India Product Development
41 Fabrics & Industrial Fabrics Product Development
42 Proper Construction Works, Patana Testing and Interested In Product Development
43 Autotech Nonwovens Pvt. Ltd. Automobile Textile
44 Grasim Industries Ltd., Mumbai Viscose Nonwovens
45 Kusumgar Corporate Pvt. Ltd., Mumbai Filter Fabric
46 Jeevan Nonwoven Nonwoven Geo- Textile
47 Balaji Industries, Mumbai Nonwoven Fabrics for Masks
48 Aim Filtertech Pvt. Ltd. Testing
Agrotech & Packtech
Shading percentage, UV-resistance, Tensile properties, CBR Puncture

resistance
49 Garware Technical Fibres Material Compounding and Shade-net development (Raschel Knitting),
Monofilament development facility, color fastness, coating and
lamination, Information and training services
Shading percentage, UV-resistance, Tensile properties, CBR Puncture
Tufflex
50 resistance
Monofilament development facility, color fastness, coating and lamination
Shading percentage, Weathering resistance/UV-resistance, Tensile
strength, CBR Puncture resistance, UPF factor
51 CTM Technical textiles Ltd. Material Compounding and Weaving facility for insect net and
monofilament development facility for anti-counterfeit yarn, Information
and training services
Shading percentage, UV-resistance, Tensile strength, CBR Puncture
52 B&V Agro Irrigation Co.
resistance
Tuffropes Pvt. Ltd. UV-resistance, Tensile properties, Modulus, Material characterisation
54
Bio-degradability study, UV-resistance, Tensile properties, UV-resistance,

55 Sidwin Fabric Pvt. Ltd. Tensile strength, Analytical Testing SEM, HPLC, HPTLC, STA, Information
and training services
Air permeability, water vapour permeability, UV-resistance, Tensile
56 Nirmal Fibres Pvt. Ltd.
properties
57 Alpha Foam Ltd. UV-resistance, Tensile properties, UV-resistance, Tensile properties
Analytical Testing SEM, HPLC, HPTLC, STA, GC-MS, AAS, UV-resistance,
58 Rishi Techtex Ltd. Color fastness, Tensile strength, CBR Puncture resistance, Material
Compounding, Film slitting
Water permeability, water vapor permeability, UV resistance, Tensile
59 Ambica Polymers Pvt. Ltd. properties, Analytical Testing SEM, HPLC, HPTLC, STA, Information and
training services
60 Derpa Industries Coat combat

61 Elora Sales & Corporation Body protector
62 Jai society and wood works Rain poncho
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
63 M/S Kanha Vanijya Pvt. Ltd. Shield

64 M/S Millitex Equipments Ruck-sack
65 M/S Applied systems Body protector
67 M/S Fin enterprises Body protector
68 M/S Kanha Vanijya Pvt. Ltd. Grond sheet, shield
69 RC Industries Helmet
70 M/S Science and security Body protector
Geotech & Oekotech
71 Jeevan Nonwoven
72 Dynamic Wooltex
73 Techfab India Industries Ltd.
74 Garware Technical Fibres
75 MacAfee Environmental solution Pvt. Ltd
Product development and Testing
76 Geo source
77 SVM Nonwovens Pvt. Ltd.
78 Kusumgar Corporates Pvt. Ltd.
79 Sravya Textiles Ltd.
80 Strata Geosystems (India) Pvt. Ltd.
Agrotech
81 Aditya Birla group Nonwoven

82 Reliance Industries Ltd. Quilt
83 Fibro Laminate Coated and laminated product
84 S.L.Banthia Textiles Industries Pvt. Ltd Coated product
85 Alok Industries Ltd. Vapi Coated product
The Aerial Delivery Research and Coated fabric for inflatable
86
Development Establishment, Agra
87 Calcutta Canvas Co. Coated product
Zen Linen International Private Limited, Quilt
88
Chennai
Meditech
Cotton Wool Roll making facility and their quality evaluation like
89 Precot Meridian Ltd., Hassan Analytical properties of cotton fibres such as ABPO and biological
properties like bioburden
Alpha Foam Ltd., Pune Impact penetration test, Hydrohead test is regularly utilised for
90
evaluating their surgical gown fabric
Bella premier Happy Hygiene Care Pvt. Sanitary napkin package test, Surgical gown fabric quality evaluation
91
Ltd., Dindigul
Sanitary napkin package test, Surgical gown fabric quality evaluation
92 Nobel Hygiene Pvt. Ltd., Nashik
93 New Care Hygiene Products, Ernakulam Sanitary napkin package test, Surgical gown fabric quality evaluation
Amaryllis Healthcare Pvt. Ltd., Impact penetration test, Hydrohead test is regularly utilised for
94
Bangalore. evaluating their surgical gown fabric
95 Cartel Healthcare Pvt. Ltd., Raipur Evaluate the quality of coverall as well as surgical gowns
Evaluate the quality of surgical gown as well as surgical facemask used in

96 Mediklin Health Care Ltd., Mumbai
operation theatre by healthcare professionals
Thea Tex Healthcare India Pvt. Ltd.,
97 Evaluate the quality of surgical facemask
Palghar, Maharashtra
Surgical gown, surgical facemask and hygiene products package test
98 Pioneer Hygiene Sales Private Limited
facilities are regularly utilised by them.
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Hometech & Indutech
99 VXL, CBE Technical textiles testing

100 Masturlal Cords & Ropes Pvt. Ltd.,
Technical textiles testing
Coimbatore
101 Carborundum Universal Ltd., Chennai Technical textiles testing / Product Development
102 SRF Ltd., Chennai Technical textiles testing
103 Atlantic Fabrics, Karur Hot melt lamination / Product
104 Srivari, Pollachi Coir Needle Punching
105 Dynamic Engineering, Coimbatore Needle Punching / Product Development
106 Lakshmi Machine Works Limited Technical textiles testing
107 BKS Textiles Pvt. Ltd., Tirupur Technical textiles testing
108 KG Denim Pvt. Ltd., Coimbatore Technical textiles testing
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Annexure 27
Key instruments and product development facilities at COEs
List of the product

List of the important
S.No. development facilities Applications of products developed
instruments available
available
Sportech
Develop conductive yarns on friction
Hot Melt Laminating & Coating
1 Atomic Force Microscopy (AFM) spinning system to provide thermal
machine
insulation
2 Kawabata Evaluation System Evenness tester Developed high altitude jackets
Develop coating products using hot melt
3 FTIR Spectrometer Sweating Thermal Mannequin pressure sensitive adhesive on hot melt
laminating and coating machine
4 ICP-OES Warp Knitting Machine (Raschel) Developed breathable coated textiles
Warp Knitting Machine (Tricot) Developed Flame retardant fabric
5 Electrospinning system
samples of 100% PBI filament
Surface Resistance tester-
Developed coating products with
6 Electrostatic Resistance (EN Rapier Weaving machine
negative ion finishes
1149)
Developed Chemical finished frictionless
7 Universal weathering machine Compression Moulding Machine
yarn
Ring frame Developed friction spun yarn from
8 De Matia flex tester
viscose waste
Development of keratin-based
9 UTM 100 kN Tester Roving frame Biocomposite films and Electrospun
Nanofibrous mats from wool wastes
10 BAW abrasion tester Circular Knitting Machine Developed evaporative cooling jackets
11 Chemical Repellency Tester Braiding machine Developed sleeping bag
Precision winding machine for Developed active fitness clothing like
12 Zero grade Granite table
carbon gym and yoga wear
Composites
Continuous different profile Building, construction, and Engineering
13 Pultrusion Machine
manufacturing by composites application
14 Braiding Machine Composite preform Space application
Dornear carbon weaving Composite manufacturing for
15 Carbon Fabric
machine engineering application
16 Hydraulic Press Compression-molded sheet Engineering application
17 Impregnation plant Prepreg development Composite manufacturing
18 Vacuum Infusion Laboratory Composite Manufacturing Engineering Application
Jute Geotextile
19 Yarn and fabric property testing Biological laboratory -
20 Water permeability Physical testing laboratory -
Advanced physical testing
21 AOS, CBO -
Laboratory
22 DCP tester Chemical testing laboratory -
Advanced chemical testing
23 Merlin tester -
laboratory
24 Liquid and plastic limit tester Analytical Laboratory -
25 Road simulation apparatus Composite testing Laboratory, Soil -
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
testing laboratory
CCM lab, Ecological testing
26 Soil burial testing facility -
laboratory
Nonwovens
Needle Punching Nonwoven Needle Punching Nonwoven Evaporation Membrane For Separation Of
27
Machine Machine Ethanol- Water.
28 Thermal Bonding Machine Thermal Bonding Machine Solar Water Purifier For Rural India
Linen Based Non-Woven For Home
29 Hot Calendering Machine Hot Calendering Machine Furnishing Market, For Example As Sun
Shades
30 Coating And Lamination Coating And Lamination Accelerated Mileage Air Filter
Development Of Thermal Bonded
31 Digital Bursting Strength Tester
Wadding
Development Of Linen Based Nonwovens
32 Water Repellency Tester For Various Technical textiles
Applications
33 Microscope With Microtome Development Nonwoven For Insulation
Development of Silver Nano Particle-
Based Nonwovens For Various Food
34 LOI Tester
Processing Industry. (Especially For Milk
Filtration Application)
Development Of Insulating Layer For
35 Pore Size Analyser
Defense Application
UV Accelerated Weathering
36 Geo Bags
Tester
37 Linear Density & Fibre Crimp Filter Fabric
38 Air Permeability Tester
Water Vapour Transmitivity
39
Tester
40 Non-Woven Orientation System
41 Liquid Strike Tr. Wet Back
42 Thermal Conductivity Tester
43 Digital Tearing Strength Tester
44 Hydrostatic Water Head Tester
45 Viscometer Brookfield
Agrotech & Packtech
Shade-o-meter: Shade percentage
46 Shade-o-meter Raschel Warp Knitting Machine
analysis for shade-nets
Wind blockage tester: wind resistance of
47 Wind Blockage Tester Film Blowing System
windshield
Smart Shade-net: Managing Thermal
48 Water Vapor Permeability Tester Needle Punch Nonwoven System
Energy especially in the Infrared Region
Reflective Ground Cover: To manage
microclimate by managing reflection of
49 Water Permeability Tester Beam Warping Machine
thermal energy, also conserves moisture
and controls weed growth
PP/Jute Ground Cover: Weed control,
moisture-managing mulch mat. It brings
the best of synthetic and natural in one
50 CBR Puncture Spun-bond Machine
product. It can address the significant
challenge of reducing GSM in the Jute
Mulch
Biodegradable PHB: Raw material for
51 Porometer Monofilament Spinning System
Mulching application
52 UV- Resistance Tester Weaving Machine UV Fluorescent yarn: Tracking

counterfeiting in shade-net and other
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
net-type Agrotextile products
Weathrometer Moisture-managing packaging:

53 Circular Weaving Machine Packaging enhances the shelf life of the
fruits and vegetables
Superabsorbent Mat: Floriculture, potted
Differential Scanning plants. Superabsorbent Mat can hold 5 to
8 times more water in comparison to its
54 Calorimetry Coating and Lamination System
weight. This facilitates plant water needs
for 8-10 days, thus eliminates the need
for frequent watering
Chicken feather based keratin material:

Thermogravimetric Analyzer Bio-degradable alternative raw material
55 Twin Screw Compounder
for the development of bio-degradable
pots and other Agrotextile products
Water harvesting net: This innovative

product can harvest water from fog and
56 HPLC meet daily water needs, especially in the
hilly region where water is not available
throughout the year
HPTLC, CHNS-O Analyzer, Workwear gear: Designed for farmers,
57 Nanoparticle size analyzer, GC- used during pesticide spray. Prevents
MS, AAS leaching of harmful chemicals to the skin
Testing/evaluation of Cut-resistant gloves from
58 Radiant heat tester
technical textiles products composite metallic yarn
Testing of products such as
personal protective
Clothing, Textile used in
59 Heat transmission index automobile, Fabric for the stab-resistant vest
railways, airplane, shipping
industries, Floor Coverings
Support as a resource center Modified power loom to produce
60 Molten metal splash tester
with IT infrastructure seamless jute bags/sacks
Automatic flammability Military and paramilitary
Indigenous prototype
61 tester for vertically oriented uniforms from NYCO
development
samples
Vertical flammability Training of personnel from the
62 Seamless jute carry bags
Tester technical textiles industry
Horizontal flammability Knowledge sharing with
63 Protective workwear for cement porter
Tester stakeholders and end-users
Inclined flammability Incubation center providing Multi-Layered Flame & Thermal
64 Tester facilities for testing new ideas Resistance Fabric for Fire Fighter
and technologies. Clothing
Automatic limiting oxygen index Setting up standards that are at

65
tester par with the global level.
66 Impact of spatter tester
67 Electrical resistivity tester
IMO Tester, Hot air Oven, Gas
68
Fume chamber
Toxicity tester, Smoke visibility
69
tester, Fire resistance tester
Geotech & Oekotech
Non-woven preparation by Hydro
70 Hydro entanglement non-woven m/c Crop cover, Separator
entanglement non-woven m/c
71 Electrospinning Needle punch Geotextile
72 Plasma atmospheric Filter product by Electrospinning Filtration, Drainage
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Melt spinning & Melt compounding for Geotextile, Separator, composite

73 Multi-station tensile tester
fiber preparation preparation, drainage
74 Thermal conductivity Geocomposite, Woven Geotextile
Agrotech
75 Agro-net knitting machine Agro-net
76 Pilot Coating machine Coated fabric
Pilot Hot melt laminating
77 Laminated fabric
machine
78 Plasma machine Coated fabric
79 Needle punch machine Non-woven fabric
80 Hydro entangle machine Non-woven fabric
81 Spun bond machine Non-woven fabric
Photosynthetic
82 For Testing
Apparatus
83 Contact Angle Meter For Testing
Gas Chromatography-Mass
84 For Testing
Spectrometry
85 Vibrodyne For Testing
86 Film Thickness Tester For Testing
Water Vapour Transmission
87 For Testing
Tester (Mocon)
Cold Crack Tester (COE
88 For Testing
Agrotech)
89 Taber Abrasion Tester For Testing
90 Shear Tester For Testing
Meditech
To produce Medical textile products such
91 Rieter perfojet Spunlace as wipes, surgical gowns, wound care
products
These products are worn to absorb
92 Sanitary Napkin Making Machine Sanitary Napkin menstrual discharge, thereby protect
clothing and furnishings
Hernia mesh The primary function of hernia mesh is
93 Warp knitting machine – Tricot to support prolapsed organs either
temporarily or permanently
Compression bandages are used to treat

and prevent deep vein thrombosis (DVT),
94 Warp knitting machine – Rachel 3D Compression bandage leg ulceration, and varicose veins.
Moreover, a 3D compression bandage
provides uniform pressure over the leg
Coating and Laminating Antimicrobial / Liquid repellent The outcome of the product is used to
95
machine finished products produce surgical gowns
Vascular grafts are used on damaged or
diseased blood vessels when surgeons
96 Tubular weaving loom Vascular graft need to redirect blood flow by replacing
the blood vessel, often using synthetic
grafts
Loop type mask and Healthcare professionals wear this
97 Facemask making machine
Tie type mask product during the operation procedure
Compression bandages are used to treat
Crepe bandage, Compression
98 Narrow width loom and prevent deep vein thrombosis (DVT),
bandage
leg ulceration, and varicose veins
Cotton Wool roll making This product is used for wound
99 Cotton Wool Roll
machine management in the healthcare segment
100 Wipes manufacturing machine Dry wipes, Wet wipes, Medicated Wipes are used either to remove the dirt
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
wipes, Industrial wipes particles or apply the cosmetic/

medicated agents over the skin
A surgical gown is a personal protective
garment intended to be worn by health
Ultrasonic sewing machine, care personnel during surgical
Surgical gown, drape, instrument
101 Ultrasonic Spot Welding procedures to protect both the patient
covers
Machine, Chain stitch machineQ and health care personnel from the
transfer of microorganisms, body fluids,
and particulate matter
Hometech & Indutech
102 Needle Punching Machine Non-woven, Filter Filtration, Thermal and sound Insulation
Multi-surface cleaning wipes, Disinfectant
Skin contact and non-skin
103 Wet wipes wipes, Moisturising wipes, Leather
contact any wipes
cleaning wipes
Laminating any flexible Baby dry sheets, Ironing pads,
104 Hot melt lamination machine
substrates Waterproof jackets
105 Spun cartridges, Wound filter PP spun cartridge filter ETP Filtration
106 Thermal bonding machine Wadding, High loft non-woven Thermal insulation, sound insulation
Coir composites, Nonwoven Furniture, Thermal insulation, Decorative
107 Hot Press
reinforced composites products
Coir Mattress, Coir Gardening Articles,
108 Coir Needle-punched non-woven Coir Nonwoven
Sound Insulation
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Annexure 28
Directory of Academic Institutions offering Undergraduate and Postgraduate
education in Textile Engineering and Technology
Head of
Name of the institution/textile Phone Number and
Address Weblink
Institute department and email ID
Designation
[email protected]
IIT Campus, Hauz
Indian Institute of Prof. R. S. [email protected]
1 Khas, New Delhi, https://home.iitd.ac.in/
Technology Delhi* Rengasamy, HOD
Delhi- 110016
011-26597135
[email protected]
Shri Guru Govind [email protected]
Vishnupuri, Nanded, o.in
Singh Ji Institute of Prof. A. K.
2 Maharashtra- https://sggs.ac.in
Engineering and Chakraborty, HOD [email protected]
431606
Technology*
024-62269234
[email protected]
Avinashi Rd,
PSG College of Dr. K. Prakasan,
3 Peelamedu, https://www.psgtech.edu/
Technology* Principal 0422-2572177, 2572477,
Tamilnadu- 641004
4344777
12, William Carey [email protected]

Govt. College of
Road, Serampore, Dr. Adwaita Konar, [email protected] http://www.gcetts.org
4 Engineering & Textile
West Bengal - HOD www.gcetts.ac.in
Technology
712201 033-26621058, 26623156
Department of Jute 35, Ballygunge [email protected]

Dr. Debasish Das, n
and Fibre Circular Road,
5 HOD https://www.ijtindia.org
Technology, Calcutta Kolkata, West
University* Bengal- 700019 033-24615632
[email protected]
Ghandi Chhak, [email protected]
Institute of Textile Choudwar, Dist. Sri Goutam https://www.ittchoudwar.
6 [email protected]
Technology Cuttack, Odisha - Bhattacharya, HOD org
754025
044-22541418
[email protected]
Anna University, [email protected]
Alagappa College of Sardar Patel Road, Dr. V. R. Giridev, [email protected] https://www.annauniv.ed
7
Technology* Guindy, Chennai, HOD u/act
Tamilnadu – 600025 044-22359129, 22359128,
22359127, 22359126
[email protected].
Matunga (E), in
Veermata Jijabai Prof. S.
Mumbai,
8 Technological Gangopadhyaya, [email protected] https://www.vjti.ac.in
Maharashtra-
Institute (VJTI) Asst. Professor
400019
022-24198102, 24198256
Giani Zail Singh [email protected]
Dabwali Road,
Campus College of Dr. Anupam Kumar, http://www.gzscampus.ac
9 Bathinda, Punjab-
Engineering and HOD .in
151001 0164-2280985
Technology
Government College 4, Cantonment Dr. Abhijit Biswas, [email protected]
10 of Engineering and Road, Berhampore, Officer in charge / n http://www.gcettb.ac.in
Textile Technology Murshidabad, West Principal [email protected]
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Bengal - 742101
033-26621058, 26623156
[email protected]
Yermarus Camp Dr. R. Basawaraja,
S. L. N. College of du.in
11 Raichur, Karnataka - Principal http://slnceraichur.com
Engineering
584135
08532-251048
[email protected]
Kumaran Kottam
Campus, P.O. +91-9787282231,
RVS College of
Kannampalayam, DR. V. Gunaraj,
12 Engineering & 7502328000, 7502338000 https://www.rvscet.ac.in
Trichy Main Road, Principal
Technology
Coimbatore,
Tamilnadu - 641402
Babhulgaon (Jh)
N.H. No-6, Nagpur [email protected]
College of
Road, Near Shivaji Prof. Dr. S. K.
13 Engineering & https://www.coeta.ac.in
Park, Akola, Deshmukh, Principal
Technology 0724-2259024, 2259069
Maharashtra-
444001
[email protected]
Technological P. O. Birla Colony .in
Prof. Dr. G. K. Tyagi, http://www.drgktyagi.com
14 Institute of Textiles Bhiwani, Haryana -
Director /contact.htm
& Sciences 127021 01664-242561, 242562,
242563, 242564
Opp. Gujarat [email protected]

University, ldce-abad-
LD College of Mr. Ashwin Thakkar, [email protected]
15 Navrangpura, www.ldce.ac.in
Engineering* HOD
Ahmedabad, Gujarat
- 380015 079-26302887
National Institute of
Dr. B.R Ambedkar Technology [email protected]
Prof. Lalit Kumar https://www.nitj.ac.in/tex
16 National Institute of By-Pass Road, P.O.
Awasthi, Director tile-technology
Technology* REC Jalandhar, 0181-269301
Punjab - 144027
College of Ghatikia, Kalinga [email protected]
Dr. Bibhu Prasad
Engineering and Nagar,
17 Dash, Associate https://www.cet.edu.in
Technology, Bhubaneswar,
Professor 0674-2386075
Bhubaneshwar* Odisha - 751003
Rajwada, P.O.Box. [email protected]

DKTE Society's
No.130, Ichalkaranji,
Textile and Prof. Dr. P. V.
18 Dist. Kolhapur, 0230-2421300, 2439557, www.dkte.ac.in
Engineering Kadole, Director
Maharashtra - 2439558, 2439559,
Institute*
416115 2432340
P. O. Box No. 325, [email protected]

Bapuji Institute of [email protected]
Shamanur Road, Prof. Y.
19 Engineering and www.bietdvg.edu
Davangere, Vrushabhendrappa
Technology*
Karnataka - 577004 08192-222245
[email protected]
Jawaharlal Nehru JNGEC Sundernagar, Prof. Dr. S. P.
[email protected]
20 Government Mandi, Himachal Guleria, Director- www.jngec.ac.in
Engineering College* Pradesh - 175018 cum-Principal
01907-267199, 267688
70 Milestone, Grand [email protected]

Panipat Institute of
Trunk Rd., Dr. Shakti Kumar,
21 Engineering and https://www.piet.co.in
Samalkha, Haryana - Director 0180-2569700, 2569799,
Technology*
132102 2569699
K. R. Circle, Dr. K. G. [email protected]
Govt. S.K.S.J.T.
22 Bangalore, Chandrashekara, om http://gsksjti.ac.in
Institute*
Karnataka- 560001 Principal
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
080-22260126
Bannari Amman Alathukombai [email protected]
Dr C Palanisamay, https://www.annauniv.ed
23 Institute of Sathiyamangalam,
Principal u
Technology* Tamilnadu - 638401 04295-226000
Vill: Baroli, Indore- [email protected]
Shri Vaishnav Mr. Ranjit Kumar
Sanwer Road
24 Institute of Tech & Dutta, Dean, HOD http://www.svvv.edu.in
P.O. Alwasa, Palia
Sc.* and Professor 0731-2349111, 2349112
Indore - 453331
Salem Main Road, [email protected]
SSM Engineering Komarapalayam, Dr. S. Balamohan,
25 http://www.ssmce.ac.in
College* Erode, Tamilnadu - Principal
638183 +91-9894026708
Chinnavedampatti
Kumaraguru College Dr. J. Sreenivasan,
26 Coimbatore, [email protected] https://www.kct.ac.in
of Technology* Principal
Tamilnadu - 641006 [email protected]
Nathalal Parikh
University Institute Marg, Matunga, Prof. Aniruddha B.
https://www.ictmumbai.e
27 of Chemical Mumbai, Pandit, Vice [email protected]
du.in
Technology (UICT)* Maharashtra - Chancellor
400019
Indian Institute of
Chauri Road Bhadohi Prof. Alok Kumar, [email protected]
28 Carpet Technology https://www.iict.ac.in
- 221401 Director [email protected]
(IICT)*
Jawaharlal Darda MIDC, Lohara, [email protected]
Institute of Yavatmal, Dr. R. S. Tatwawadi,
29 http://www.jdiet.ac.in
Engineering and Maharashtra - Principal 07232-249586,
Technology* 445001 7447797964
[email protected]
11/208, Souterganj, [email protected]
U.P. Textile
Parwati Bagla Rd, Dr. Mukesh Kumar
30 Technology [email protected] https://www.uptti.ac.in
Kanpur, Uttar Singh, Director
Institute*
Pradesh- 208001
0512-2531814, 2530199
Sector-23, Raj [email protected]

Nagar, Sanjay
Nitra Technical Dr. Arindam Basu,
31 Nagar, Ghaziabad, 0120-2807390, 2807391, https://www.nitra.ac.in
campus* Director
Uttar Pradesh - 2807392, 2807393,
201002 2807394, 2807395
[email protected]
[email protected]
MLV Government
Pur Road, Pratap
Textile and Dr. Dhirendra
32 Nagar, Bhilwara, 01482-240822 https://www.mlvtec.in
Engineering College, Sharma, Principal
Rajasthan - 311101
Bhilwara*
Prakash Nagar,
M.T.H. Road [email protected]
Jaya Engineering Dr. K. Samidurai,
33 Thiruninravur (Near https://jec.ac.in
College* Principal
Avadi), Chennai - 044-28155531
602024
principalrechkt@rediffmail.
RTE Society's Rural NH-63, Gadag com
Dr. V. M. Patil,
34 Engineering College, District, Hulkoti, http://rechulkoti.edu.in
Principal
Hulkoti* Karnataka - 582205
08372-289097, 289253
[email protected]
P.O. Thokkavadi,
K. S. Rangasamy Dr. R. [email protected]
Namakkal
35 College of Gopa1akrishnan, http://ksrct.ac.in
Thiruchengode,
Technology* Principal 04288-274741, 274742,
Tamilnadu- 637209
274743, 274744
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
[email protected]
Osmania University, [email protected]
University College of Prof. R. Shyam
36 Hyderabad, [email protected] https://www.ouct.ac.in
Technology* Sunder, Principal
Telangana– 500007
040-27098472
Dr. R. K. Desai [email protected]
Sarvajanik College of Marg, Opp. Mission Dr. Prakashchandra
37 Engineering & Hospital Athwa A. Khatwani, https://scet.ac.in
Technology* Lines, Surat, Gujarat Professor 0261-2240146, 2240147,
- 395001 2240148
[email protected]
Department of
Grand Trunk Road,
Chemistry, Dr. Karamjeet Singh
38 Off, NH 1, Amritsar, 0183-2258802, 0183- http://online.gndu.ac.in
Guru Nanak Dev Kahlon, Registrar
Punjab - 143005 2450601
University*
Extn. 3019
Textile Engineering
Department, M. S. head-
Maharaja Sayajirao [email protected]
University of Baroda Dr. Satyajeet B. https://www.msubaroda.a
39 University of
Kalabhavan, Chaudhari, HOD c.in
Baroda*
Vadodara, Gujarat - 0265-2410603, 2424848
390001
* Participated in the primary survey conducted by IIT Delhi.
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Annexure 29
Directory of Institutes offering textile relevant Diploma Courses
Name of the
Address State Phone Number email ID Course(s) offered
Institute
Dr. S. & S.S. Ghandhy Textile Manufacturing
Majura Gate, Ring 9099063212, [email protected],
1 College of Engineering Gujarat Technology, Textile
Road, Surat -395001 0261-2655799 [email protected]
& Technology Processing Technology
Government [email protected],
Athava Gate, Surat- 9099063215,
2 Polytechnic for Girls, Gujarat ggp-surat- Textile Design
395001 0261-2463017
Surat [email protected]
Ahmedabad,
Sarkhej-
Textile Processing
Gandhinagar, [email protected],
R.C. Technical Technology, Textile
3 Highway, Opp. Gujarat 079-27664785 rcti-abad-
Institute Manufacturing
Gujarat High Court, [email protected]
Technology
Sola, Ahmedabad-
380060
[email protected]
Sir Bhavsinhji Vidhyanagar, u.in, Textile Manufacturing
4 Gujarat 02718-2426742
Polytechnic Institute Bhavnagar-364002 [email protected] Technology
m
Dr. B. B. A. Madhuban Road,
Government Behind Elect. Sub Dadra & Textile Manufacturing
5 0260 – 2640126 [email protected]
Polytechnic, Karad Station, Karad (D.P), Nagar Haveli Technology
(D.P.) D&NH-396240
The M. S. University
Maharaja Sayajirao of Baroda,
6 Gujarat 0265-2795555 [email protected] Textile Chemistry
University of Baroda Pratapgunj,
Vadodara
Near Guru
Jambheshwar
[email protected], Textile Processing,
Govt. Polytechnic, University of Science
7 Haryana 01662-277460 [email protected], Textile Design, Textile
Hisar & Technology (GJU
[email protected] Technology
S&T), Delhi Bye-
Pass, Hisar-125001
Central Polytechnic Vattiyoorkavu P.O. ,
8 Kerala 0471-2360391 [email protected] Textile Technology
College Trivandrum- 695013
Dr. B.R. Ambedkar
Dr. B R Ambedkar Polytechnic College, 0751-2456892,
9 M.P. [email protected] Textile Engineering
Polytechnic College Jhansi Road, Gwalior 2320790
- 474009
Rasoolabad Road,
Government Girls
10 Teliarganj Allahabad U.P. 0532-2546302 [email protected] Textile Design
Polytechnic, Allahabad
- 211004
Dayalbagh Educational
Dayalbagh, Agra- Textile Designing and
11 Institute (DEI U.P. 0562-2801545 [email protected]
282005 Printing
Technical College)
0731-
Shri Vaishnav M.O.G. Lines, [email protected],
12 M.P. 2382502,498818 Textile Technology
Polytechnic College Indore- 452002 [email protected]
5
Mukesh Patel
Mukesh Patel School
Technolgy Park,
Of Technology 9168830575,
Village: Babulde, Textile Technology,
13 Management & Maharashtra 9021751095, [email protected]
Bank of Tapi River, Textile Wet Processing
Engineering, Shirpur 02563-295545
National Highway
Campus
No: 3, Shirpur, Dist.
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Dhule- 425405
Veermata Jijabai H R Mahajani Rd,
022-24198255, [email protected],
14 Technological Institute Matunga, Mumbai- Maharashtra Textile Technology
24198102 [email protected]
(VJTI ) 400019
Gandhi Chhak,
Institute of Textile Choudwar P.O.
15 Odisha 0671-2394217 [email protected] Textile Technology
Technology, Choudwar Choudwar, Dist.
Cuttack - 754025
Near Purani Chungi,
Punjab Institute of P.O. R. S. Mills, G. T. Textile Technology,
16 Punjab 0183-5096216 [email protected]
Textile Technology Road Chheharta, Textile Design
Amritsar
Annai J.K.K Punjaithuraiyampala
9789456708, Textile Technology,
17 Sampoorani Ammal yam, Tamil Nadu- Tamilnadu [email protected]
04288- 266760, Textile Processing
Polytechnic College 638506
Chettinad,
Annamalai Polytechnic 04565-283250, info@annamalaipolytechni
18 Sivagangai, Tamilnadu Textile Technology
College 283151 c.in
Tamilnadu- 630102,
65-A
9043240497,
E.I.T Polytechnic Pethampalayam [email protected], Textile Technology,
19 Tamilnadu 04256-240497,
College Road, Kavindapadi, [email protected] Textile Processing
243619
Dist. Erode - 638455
Kuppepalayam, P.O.
7708004040,
G.R.G Polytechnic S.S Kulam, [email protected]
20 Tamilnadu 7708079911, Textile Processing
College Coimbatore – n
0422-2929090
641107
GandhiGram Rural Gandhigram, Dist.
21 Tamilnadu 0451-2452323 [email protected] Textile Technology
Institute Dindigul - 624302
Maaveeran
Poolithevar Nagar,
Gomathi Ambal 04636-280047, gap354prl_college@yahoo.
22 Malaiyadikurichi, Tamilnadu Textile Technology
Polytechnic College 280048 com
Sivagiri Taluk, Dist.
Tirunelveli- 627755
Institute of Textile Tharamani, Chennai [email protected],
23 Tamilnadu 044-22541418 Textile Technology
Technology - 600 113 [email protected]
Nachimuthu Udumalai Road, 04259-236030,
24 Tamilnadu [email protected] Textile Technology
Polytechnic College Pollachi-642003 236040, 236050
Palanisame Ravi
Nagar,
Nanjappa Institute of 9894368668, nanjappapolytechnic@yah
25 Karumathampatti, Tamilnadu Textile Technology
Technology 9952413701 oo.co.in
Coimbatore -
641659
PACR Salai, K.R.
Nagar P.O.
P.A.C Ramasamy Raja
26 Virudhunagar Dist. Tamilnadu 04563-235740 [email protected] Textile Technology
Polytechnic College
Rajapalayam-
626108
PSG Polytechnic
College, Post Box
P.S.G Polytechnic No. 1611, [email protected]
College Peelamedu, n
Coimbatore -
641004
Rukmini
Shanmugam
Rukmini Shanmugam
28 Polytechnic College Tamilnadu 0452-2429281 [email protected] Textile Technology
Polytechnic College
Varichiyur, Madurai -
625020
NH - 47, Salem main Textile Technology,
S.S.M Institute of [email protected] ,
road, Valayakanoor, 9994200990, Textile Processing,
30 Textile Technology Tamilnadu [email protected] ,
Komarapalayam, 04288-262197 Textile Marketing &
and Polytechnic [email protected]
Dist. Namakkal - Management
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
638183
Thiruchuli Road
Sri Sowdambika 04566-220478,
31 Aruppukottai- Tamilnadu [email protected] Textile Technology
Polytechnic College 221627
626101
G.T. Rd., Vikas
Government [email protected] Textile Technology,
32 Nagar, Khyora, U.P. 0512-2580086
Polytechnic Kanpur m Textile Chemistry
Kanpur - 208002
Government Girls Government Girls
33 Polytechnic, Polytechnic, Asuran U.P. 0551-2501615 [email protected] Textiles Designing
Gorakhpur Chowk, Gorakhpur
Akkalkot road,
Govt. Polytechnic, 0217-2653922, office.gpsolapur@dtemaha
34 Shanti Chowk, Maharashtra Textile Manufacturing
Solapur 2653925 rashtra.gov.in
Solapur-413006
Bhulabhai Desai
Sophia Shree B. K. 022-23513157, [email protected]
35 Road, Mumbai – Maharashtra Textiles Designing
Somani Polytechnic 23514147 n
400026
Dattajirao Kadam Rajwada, P.O.Box.
0230-2421300, [email protected],
Tech. Educational No.130, Ichalkaranji- Textile Manufacturers,
36 Maharashtra 2432340, [email protected],
Society’s Textile & 416115, Dist: Textile Technology
2439557 [email protected]
Engg. Institute Kolhapur
S.R.R.S Government
37 Sircilla-505301 Telangana 99123 42024 [email protected] Textile Technology
Polytechnic, Siricilla
KSR Kalvi Nagar,
K.S. Rangasamy 04288-274741,
Thokkavadi P.O.:
38 Institute of Tamilnadu 274742, 274743, [email protected] Textile Technology
Tiruchengode -
Technology 274760
637215.,
NH 544, Avinashi
Park Group of Road, Kaniyur, [email protected],
Institutions Coimbatore – [email protected]
641659
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Annexure 30
Directory of Focus Incubation Centres for Technical Textiles
Institute
Contact
where FIC is Designation email ID Phone Number Address
Person
located
Ahmedabad 079-26307921,
Textile [email protected], 26307922,
University Campus Rd,
Industry’s Dr. Deepali [email protected] , 26307923,
1 Dy. Director University Area, Ahmedabad,
Research Plawat [email protected] , 26305131,
Gujarat - 380009
Association [email protected] 26305132
(ATIRA) Extension: 384
DKTE's
Textile & 0230-2421300, Rajwada, P.O.Box. No.130,
Prof. P. V. [email protected] ,
2 Engineering Director 2439557-59, Ichalkaranji- Dist: Kolhapur
Kadole [email protected]
Institute 2432340 Maharashtra - 416115
(DKTE)*
0120-2783335,
Northern
2786434, 2786451,
India Textile
Dr. Arindam Director [email protected] , 2783334, 2783586, Sector-23, Raj Nagar,
3 Research
Basu General [email protected] 2783592, 2783638, Ghaziabad - 201002
Association
2783090, 2783094,
(NITRA)
2783596
Dr. Avinashi Road, Neelambur,
PSG College HOD, Textile [email protected] ,
4 Thilagavathi 0422-3933666 Coimbatore, Tamilnadu -
of Technology Technology [email protected]
G. 641062
The South South India Textile Research
India Textile Association (SITRA), Post
Dr. P. 0422-25743679,
5 Research Director [email protected] Box No. 3205, PO
Vasudevan 4215333
Association Aerodrome, Coimbatore -
(SITRA)* 641014
Indian
Indian Institute of
Institute of Prof. Satyahari 03222-282247,
6 Professor [email protected] Technology Kharagpur
Technology, Dey 283760
Kharagpur - 721302
Kharagpur*
Indian
Dr. Asim
Institute of Professor / [email protected] , 022-25767521, IIT Bombay, Powai, Mumbai -
7/8 Tewari / Dr.
Technology, Professor [email protected] 25767590 400076
Anirban Guha
Bombay
Indian
Institute of Dr. B. K. IIT Campus, Hauz Khas, New
9 Professor [email protected] 011-26597135
Technology, Behera Delhi, Delhi- 110016
Delhi
Indian Indian Institute of
Institute of Dr. Deepu Associate Technology
10 [email protected] 0512-2597460
Technology, Philip Professor Kalyanpur
Kanpur Kanpur-208016
Synthetic & Art Silk Mills
Synthetic &
Research
Art Silk Mills Dr. U.K. Executive [email protected], 022-24935351,
11 Association (SASMIRA),
Research Gangopadhyay Director [email protected] 24935352
SASMIRA Marg, Worli,
(SASMIRA)*
Mumbai - 400025
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Annexure 31
Directory of Technology Parks for Technical Textiles
Name of
Technology Contact Person Designation email ID Phone Number Address
Park
Door No. 6-14-
Director
Goutham Mr. Maturi Bala Maturi BK Rao: 3, 14/3,
Buddha Krishna Rao 9848132095 Arundelpet,
1 [email protected],
Textiles Park Madava Rao: Guntur, Dist.
[email protected]
Pvt. Ltd.* Mr. Madava Rao 9444076373 Krishna, AP -
Shareholder
522002
Chennai One,
Great Indian Pallavaram
Director,
Linen & Thoraipakkam,
Mr. Unnamalai [email protected] ,
2 Textiles Infra 044-22541793 200 Feet Road,
Thiagarajan MD, Elnet [email protected]
Structure Co. Thoraipakkam,
Technologies
Pvt. Ltd. Chennai, TN -
600097
Adani House,
Mundra SEZ Mr. Parimal Nr. Mithakali
Integrated Parekh, Six Road,
079-26565555,
3 Textiles and Director(s) [email protected] Navarangpura
25555555
Apparel Park Mr. Kamlesh Ahmedabad
Pvt. Ltd.* Bhagia Gujarat-
380009
Mr. Ramalingam
Ramasamy
SF No: 434,
Chandrasekaran,
Gurumandhur
High Road,
Mr. B. Shanmuga
Kolapalur Post,
Vadivel,
Gobi Tk, Dist.
Pallavada
Erode, TN -
4 Technical Mr. Milton Director(s) [email protected] 9965932828
638456 and
Textiles Park Ambrose John
78 Greams
Krishnan
Road Thousand
Venkateswaran,
Lights Chennai,
TN- 600006
Mr. Joseph
Anthony John
2nd
Floor,Chiripal
Vraj House,
Mr. Jaiprakash
Integrated Director Shivranjani
Chiripal [email protected] 079-26734660,
5 Textiles Park Cross Road ,
[email protected] 26473302
Ltd. Company Satellite,
Mr. Deepak Vyas
(Gujarat)* Secretary Ahmedabad,
Gujarat-
380015
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Annexure 32
List of enterprises that participated in the survey conducted by IIT Delhi
No. Name of the enterprise City State Email ID Contact Person Phone Number
1 A. K. Industrial Fabrics Ltd. Kanpur Uttar Pradesh [email protected] Sidharth Kedia 0512-2315461
2 Aeronav Industrial Safety Noida Uttar Pradesh [email protected] Richa Hora, Sandeep 0120-2425514
Appliances Hora
3 A.Y.M. Syntex Ltd. Mumbai Maharashtra [email protected] Abhishek 022-61637000,
Mandawewala 02525-252662,
250749
4 B.R. Elastic Tirupur Tamilnadu [email protected], Rathnavel +91-8111064995,
m
5 Barracuda Camouflage Pvt. Gurgaon Haryana [email protected] Naresh Ummat 124-2370591,

Ltd. 2370592
6 Bharat Awnings & Canopies Delhi Delhi [email protected], Jagdish Chander +91-8079464619,
Ltd. [email protected] 9811085115,
9716009792
7 Birla Jute Mills Ltd. Kolkata West Bengal biswajit.matilal@birlacor G. R. Verma 033-24209828
p.com
8 Borda Fabrics Pvt. Ltd. Surat Gujarat [email protected] Manoj Mac +91-9727480005
9 Buildmet Fibres Pvt. Ltd. Bangalor Karnataka ramakrishnan@buildmetf Gopakumar +91-9845043345
e ibres.in Sukumaran Nair
10 Calcutta Canvas Company Chennai Tamilnadu [email protected] Manish Kumar 044-25292152,

Ltd. 25292564
11 Century Enka Ltd. Pune Maharashtra celpune.reception@birla Suresh Sodani 020-66127300,

century.com 27120113
022-43215300,
22027375
12 Chidambaram Fishnets Pvt. Chennai Tamilnadu [email protected] S G Jayaraman 044-27178442,
Ltd. 22462061,
22462082,
22462083,
22460282
13 Columbia Life Science Mumbai Maharashtra columbialifescience@yah Dharmendra Jani +91-9870025271
oo.com,
dharmendrajani@yahoo.
com
14 Datt Mediproducts Ltd. Delhi Delhi [email protected] H.K. Gulati, Rajan 011-47191777,
m, Datt 41621888
[email protected]
15 Dispowear Sterite Company Delhi Delhi [email protected] Ravi Kumar +91-8048761951,
om 9212745005
16 Evergreen Industries Coimbato Tamilnadu M. Kanakasabai 0422-3258162
re
17 Eximius Incorporation Rajkot Gujarat [email protected] Apurva Zalawadia, 02827-254452
m Mohit Zalawadia,
Jitendra Zalavadia
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
18 Faze Three Ltd. Mumbai Maharashtra [email protected] Ajay Anand 022-24944854

m
19 Forech India Pvt. Ltd. New Delhi [email protected] Krishan Agarwal 011-26961275,
Delhi 26960868
20 Garware Technical Fibres Pune Maharashtra [email protected] Sanjay Raut 020-27990301,
Ltd. m 27990306
21 Ginni Filaments Ltd. Noida Uttar Pradesh secretarial@ginnifilamen Vaibhav 0120-4058400
ts.com,
[email protected]
m
22 Gloster Ltd. Kolkata West Bengal [email protected] D.C. Baheti 033-22309601
23 Green Agroplast Pvt. Ltd. Valsad Gujarat [email protected] Ritesh Patel, Anil +91-8048758268
om Patel
24 Gujarat Flotex Pvt. Ltd. Ahmedab Gujarat [email protected] J.P. Tausnival, Nisha 079-26563204
ad Tosniwal, Priya
Mehta Vikash,
Kailash Chand
Toshniwal, Vikash
Mehta
25 Haren Textiles Pvt. Ltd. Mumbai Maharashtra [email protected] Harit Mehta 022-28966764,
28965042,
28964390
26 Hindustan Lace Kolkata West Bengal Sushant Gopal 033-24393433,
Manufacturing Ltd. Sureka 64505500,
24633001
27 Hitex Healthcare Pvt. Ltd. Mohali Punjab [email protected] Navin Kumar +91-9920134928,
m Sharma, Abhinav 9988758490
Dhar
28 International Conveyors Ltd. Kolkata West Bengal [email protected] Ashok Kumar 033-22650846,
Gulgulia 22293744
29 Jasch Industries Ltd. Sonipat Haryana [email protected] Manish 0130-2216666,
om 011-27356629
[email protected]
30 Jeevan Products Ltd. Mumbai Maharashtra [email protected] Ranjan Kumar, 082-33934130
Aditya Agrawal
31 K. K. Enviro Tech Pvt. Ltd. Kolkata West Bengal [email protected] Ketan N. Shah 033-24851541
32 K. K. Nonwoven India New Delhi [email protected] 011-26383113/14
Delhi m, Anurag Kalra
[email protected]
m,
[email protected]
33 Kusumgar Corporates Pvt. Mumbai Maharashtra [email protected] Ankur Kothari 022-61125139
Ltd.
34 Lotus Surgicals Pvt. Ltd. Mumbai Maharashtra george.paul@lotus- Mehernosh 022-24913541
surgicals.com Daruwalla
35 Loyal Textiles Mills Ltd. Chennai Tamilnadu secretarial@loyaltextiles. Vishala M 044-42277374

com Ramaswami
36 Ludlow Jute Mills Ltd. Kolkata West Bengal [email protected], Tonmoy Bera 033-40506300,
37 Madura Industrial Textiles Mumbai Maharashtra [email protected], Vipan Kalra 022-26730890
Ltd. gautam.kalra@madurate
x.com,
[email protected],
varun.kalra@maduratex.
com,
[email protected],
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
vipan.kalra@maduratex.
com
38 Magnum Health & Safety Mumbai Maharashtra [email protected] Rakesh Bhagat 022-65948415
Pvt. Ltd. m
39 Manas Geotech Ltd. New Delhi [email protected] Dinesh Kanodia 011-46000770

Delhi om
40 Mayur Uniquoters Ltd. Jaipur Rajasthan [email protected], Ramdas Acharya 0141-2361132

[email protected] 0142-3224001
41 Mewar Polytex Ltd. Udaipur Rajasthan [email protected] Sudhir Duggar 0294-2491036,
om, 2491736
sdoogar@harmonyplasti
cs.com
42 Monika Sports Industries Jalandhar Punjab [email protected] Love Kumar 0181-2203633
43 Nobel Hygiene Pvt. Ltd. Mumbai Maharashtra kamal.johri@nobelhygie Kamal Kumar Johri, 022-28201381,
ne.com Jeenu Thomas 42121314,
42121316
44 Obeetee Textiles Pvt. Ltd. Mirzapur Uttar Pradesh [email protected] Vikas Gupta, Sumit 05442-252304,
m, Saha, Anil Tripathi 252610
[email protected] 05944-250189
m,
[email protected]
m,
[email protected]
45 Park Non-Woven Pvt. Ltd. Gurgaon Haryana [email protected] Pankaj Kapoor 0124-4816111,
m, 4052880
pankajkapoor@parknon
woven.com
46 Parry Enterprises India Ltd. Vadodara Gujarat diptiranjanmohanty@tufl Dipti Ranjan 044-25306453
(Tuflex India Division) ex.murugappa.com Mohanty
47 Pioneer Hygiene Products Surat Gujarat [email protected] Sudhir Dakur 0261-2897711
Ltd. m,
sudhir@pioneerhygiene.
com
48 Pix Transmissions Ltd. Nagpur Maharashtra amarpal.sethi@pixtrans. Amarpal Sethi, 07104- 236501,
com, Shirley Paul 022-61383000
[email protected]
m
49 Polyspin Exports Ltd. Virudhna Tamilnadu [email protected] Ramji Rammohan 04563-284503
gar Raja, Ponram
Barathy
50 Precot Meridian Ltd. Coimbato Tamilnadu [email protected] Ashwin Chandran 0422-4321431
re
51 Primewear Hygiene (India) Mumbai Maharashtra [email protected] Nilesh Shah 080-48765006
Product Ltd.
52 Prosafe International Pvt. Gurgaon Haryana [email protected], Satish Verma 0124-4265417-18

Ltd. satishverma@prosafeindi
a.com,
[email protected]
53 Qrex Flex Pvt. Ltd. Surat Gujarat [email protected], Mahendra Babubhai +91-9909996531
[email protected] Gadara
54 Rajdhani Syntex Pvt. Ltd. Gurgaon Haryana [email protected] Aman Gupta 9811051569
m
55 Rama Krishna Woollen Panipat Haryana ramakrishnawoollen@g Ankit Kumar, Shivam 0180-2576522
Industries Ltd. mail.com Gupta, Pradeep
ramakrishnanonwoven@ Singh
gmail.com
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
56 Reliance Industries Ltd. Mumbai Maharashtra [email protected] Vivek Mehta 022-22785000
57 Riviera Home Furnishings Panipat Haryana [email protected] Guptar Verma 0180-6621200

Pvt. Ltd.
58 RSWM Ltd. Noida Uttar Pradesh ajaysharma@lnjbhilwara Ajay Sharma 0120-4390300
.com
59 Ruby Mills Ltd. Mumbai Maharashtra [email protected] Hiren M Shah, Purav 022-24387800
, [email protected], Hiren Shah
[email protected]
60 S M Group New Delhi [email protected] Ashish Kansal 011- 26498883,
Delhi om 26498884
61 Sai Synergy LLP Delhi Delhi [email protected] Anurag Singhal 011-26463606,
242343249
62 Sanrhea Technical Textiles Ahmedab Gujarat [email protected], M Bhavesh shah 02764-227831,
Ltd. ad [email protected] 225204
63 Shriram Rayons Ltd. New Delhi [email protected] Amit Khandelwal 011-23759300
Delhi m, [email protected]
64 Sky Industries Limited Mumbai Maharashtra [email protected] Maikal Raorani 022-61240500,
m, [email protected], 67137900
[email protected] ,
[email protected]
65 SRF Limited Delhi Delhi [email protected], Ekta Maheshwari, 0124-4354400
Subhendu.Ghatuary@srf Subhendu Ghatuary
.com
66 Strata Geosystems (India) Mumbai Maharashtra [email protected] , Gautam Dalmia 022-40635100,
Private Limited gautam.dalmia@stratain 40635199
dia.com
67 Suntech Geotextile Pvt. Ltd. Rajnandg Chhattisgarh info@suntechgeotextile. Rachit Agarwal 07744-404919,
aon com, 222777
rachit@thermocareindia.
com (MD)
68 Techno Fabrics Ltd. Surat, Gujarat, Bihar [email protected], Pinalkumar 0261-2633209,
Patna [email protected], Bhagwandas Dakoria 2633210
[email protected],
[email protected]
69 Techno Sportswear Pvt. Ltd. Tirupur Tamilnadu [email protected], Sunil Jhunjhunwala 082-20299799
technosportindia@gmail.
com
70 Teijin India Pvt. Ltd. Gurgaon Haryana [email protected], Ravi Kumar 0124-4814999
[email protected]
71 U.P.Twiga Fiberglass Ltd. Ghaziaba Uttar Pradesh [email protected] D. B. Singh +91-8929353522,
d m 9999701302
72 Venus Safety & Health Pvt. Raigad Maharashtra [email protected] Mahesh Kudav 022-27410018
Ltd.
73 Vijay Sabre Safety Pvt. Ltd. Mumbai Maharashtra [email protected] Vijay Chanchlani 080-42752945
74 Virgo Polymers (India) Ltd. Kancheep Tamilnadu [email protected] Vivek Ramsisaria +91-9003048815
uram
75 Weavetex Overseas Ltd. Delhi Delhi weave@weavetexoverse Ankush Jain 0120-2550030,

as.com 2550840
76 Welspun India Ltd. Mumbai Maharashtra reena_mohanan@welsp Milind Hardikar, 022-66136000,
un.com, Dipali Goenka, 24908000,
[email protected], Umasankar Sinha 66136000,
milind_hardikar@welspu Mahapatra 24908000
n.com,
umasankar_mahapatra@
welspun.com
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
77 Wilhelm Textile Industries Gurgaon Haryana [email protected], Alok Gupta 01272-373085,

Pvt. Ltd. [email protected] 371001
78 Winner Weaving Mills Pvt. Chennai Tamilnadu winnerweavingmills1@g KK Vejay Arunn +91-9943012369
Ltd. mail.com
79 Prashant Gamatex Pvt. Ltd. Gujarat gamatex@prashantgrou Prakash Shah 079-25830603,
Ahemdab p.com,westpoint@prash 25833384,
ad antgroup.com,ferber@pr 25891779
ashantgroup.com,texma
[email protected]
80 Karl Mayer India Pvt. Ltd. Mumbai Maharashtra pawan.singh@karlmayer Naveen Agrawal 022-66766232
.com
81 Inditech International Ltd. Mumbai Maharashtra [email protected] Pradeep Sinha 022-26736246,

m 26736247,
26736248
82 Dornier Machinery India Pvt. Mumbai Maharashtra info.india@lindauerdorni Peter Desire Dornier, 022-29250674
Ltd. er.com Ramakrishnan
Ranganathan
83 Ocean Non Woven Pvt. Ltd. New Delhi mukul.goel@oceanglobal Mukul Goel 011- 25287366
Delhi .co.in
84 Pasupati Acrylon Ltd. New Delhi [email protected] 011-47627400,
Delhi om, 47627497
[email protected]
m
85 Picanol India Pvt. Ltd. New Delhi palanisamy.kasiviswanat Kasiviswanathan 011-42461201,
Delhi [email protected] Palanisamy 42461202
86 A.T.E. Enterprises Pvt. Ltd. New Delhi a_a_bhagwati@ateindia. Anuj Bhagwati 022- 22872245,
(ATEEPL) Delhi com, 24925329
[email protected],
anuj.bhagwati@ategrou
p.com
87 Rieter India Pvt. Ltd. New Delhi [email protected] Anil Kudal +91-9822926687
Delhi
88 Hiltex Industrial Fabrics Ltd. Kanpur Uttar Pradesh [email protected], GV Shukla, Rajiv 0512-2365632,
[email protected], Bharatiya, Yash 2364438, 2312128
[email protected] Bhartiya
89 Dilo Group Gurgaon Haryana [email protected] Yogesh Kumar Garg +91-9008460751
90 Groz-Beckert Asia Pvt. Ltd. Chandiga Haryana ravjot.singh@groz- Deepak Sharma 0124-4721803
rh beckert.com
91 Harish Enterprises Ltd. Panipat Haryana [email protected] Harish Arora 011-23534018

92 Maruti Polyfabs Ltd. Haryana Haryana Rajesh Agrawal +91-8046035611
93 Swastik Filaments Pvt. Ltd. Pondiche Tamilnadu [email protected], MR Heeralal 022-42323232
rry [email protected]
m
94 Premier Enterprises Ltd. Chatrapa Tamilnadu info@premier- A.Rajendramani 044-8048723774

tti global.com,samy@premi
er-global.com
95 Zen Linen International Pvt. Chennai Tamilnadu lakshmanan.ramanathan Swadeep Patnaik 044-22626040,
Ltd. @zenclassicgroup.com 22626050,
22626060
96 Centennial Surgical Suture Mumbai Maharashtra shareinvestor@centeniali Mahima Bathwal 022-24106966

Ltd. ndia.com,
[email protected]
m
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
97 S L Banthia Industries Ltd. Surat Gujarat umangbanthia@slbanthi Umang Banthia 0261-6501377

a.com
98 Surya Tex Tech Ltd. Trilokpur Himachal [email protected] Khalil A Khan 0172-2654531
Pradesh
99 JFN Fishnet Ltd. Chennai Tamilnadu [email protected] 9884063999,
m 7871263999,
7871363999
100 Prashant Westpoint Ahmedab Gujarat westpoint@prashantgrou Prakash Shah 079-25830603,
Machinery Pvt. Ltd. ad p.com 25833384,
25891779
101 Indian Acrylic Ltd. Sangur Punjab [email protected], R. L. Yadav 0167-2278106,
om
102 Tech Fab IndiaIndustries New Delhi, [email protected], Anant Kanoi, 022-22876224,
Ltd. Delhi, Maharashtra [email protected] Saurabh Vyas 22876225
Mumbai , [email protected]
103 Tarasafe International Pvt. Kolkata West Bengal [email protected] Vivek Lohia 033-24929410,
Ltd. 24927998
104 Nirmal Fibres Ltd. Kolkata West Bengal [email protected] Abhishek Jain 011-43273200,
43273201,
43273202,
43273203,
43273204,
43273205
105 KP Tech Machine (India) Ahemdab Gujarat [email protected] Pratik Kalariya +91-8980001011
Pvt. Ltd. ad m
106 JCT Limited Hoshiarp Punjab, Delhi [email protected] Robin Prasad 01824-305008,
ur, 011-46290000
New
Delhi
107 Goodwear Fashions Ltd. Delhi [email protected] , Vishal Kapoor 011-49084908
[email protected]
108 Freudenberg Nonwovens Chennai Tamilnadu fnipl@freudenberg- Roopa Nagaraju 044-66940444
India Ltd. nw.com
109 Fortune Agro Net Ltd. Valsad Gujarat fortuneagronetvapi@gm Sunil Patel +91-9979889584
ail.com
110 BMD Ltd. Noida Uttar Pradesh [email protected] Shantanu Agarwal 0120-4390300
111 Global Texfin Ltd. Kolhapur Maharashtra globaltexfin2018@gmail. Sanjay Quane 0230-2438575
com
112 Pashupati Polytex Pvt. Ltd. Kashipur Uttarakhand [email protected] Nitin Agarwal +91-9634090058
113 Shingora Textiles Ltd. Ludhiana Punjab customercare@shingora. Anuj Jain 1800-1-372273
net
114 Superfil Products Pvt. Ltd. Nandana Chennai [email protected] S. Narayan (M.D.) 044-42969309
m om
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Annexure 33
Directory of important Manufacturers’ Associations
Name of the Phone

City State Contact Person Email ID
Association Number
Textile Mumbai Maharashtra Mr. Vallabh Thumar, [email protected] 022-22023766,

Machinery Chairman 22024238,
Manufacturers' 22834622
1 Association Mr. Sachin Arora,
(TMMA)* Executive Director 9342592520
(Mr. Sachin
Arora)
Indian Textile Mumbai Maharashtra Mr. Chandresh Shah, [email protected] 022-22844350,
Accessories & President 22816849
Machinery Mr. N.D. Mhatre, Director
2
Manufacturers’ General (Tech.), Mr.
Association Hemant Vyas, Director
(ITAMMA)* General (Admin.)
All India Flat Bangalore Karnataka Mr. K. D. Agarwal, [email protected] 080-22234603,
Tape President 9824044400
3 Manufacturers’ Mr. Surendra Chaudhary, (Mr. Surendra
Association Convenor Chaudhary)
(AIFTMA)
FRP (Fiberglass Chennai Tamil Nadu Mr. K.Narayana Reddy, [email protected], 044-42900325,
Reinforced Chairman (Managing [email protected] 22250359,
Plastics) Director, Chemplas India, 22251502
Institute* Hyderabad)
4
Mr. Kumarpal Rawji, Vice
Chairman (Director,
Rawji Industries,
Mumbai)
Indian Fishnet Chennai Tamil Nadu Mr. Ramesh [email protected], 9840073399
5 Manufacturers’ Chidambaram [email protected]
Association
Association of New Delhi Delhi Mr S C Kapur, Director [email protected] 011-26265461,
Synthetic Fibre General 26964154
6
Industry*
IndiNON Ahmedabad Gujarat Mr. Suresh Patel, [email protected] 9824604730,

Manufacturer President (CMD, Sidwin 9099945099
Association of Fabrics Pvt. Ltd.,
7 Nonwovens Himmatnagar), Mr.
Apurva Zalavadia, Vice
President (MD, Eximius
Incorporation, Rajkot)
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Annexure 34
Participants of the Technical Textiles Stakeholders’ Workshops organised by
IIT Delhi (October-December 2020)
Name of the
Stakeholder stakeholder
City State Designation email ID Phone Number
Organisation organisation
representative
Workshop I: TRAs, COEs and Academic Institutions

Ahmedabad 079-26305131,
Textile 26305132,
1 Industry's Ahmedabad Gujarat Dr. R.M. Sankar Asst. Director [email protected] 26303363
Research
Association
Indian Jute 033-66269200
Industries [email protected]
Kolkata West Bengal Mr. Palash Paul Scientist
2 Research g
Association
The Synthetic 022-24935351,
and Art Silk [email protected] 24935352
3 Mumbai Maharashtra Mr. Ravi Singh Scientist
Mills' Research
Association
[email protected] 022 -25868398
Wool Research Dr. Mrinal
4 Mumbai Maharashtra Joint Director om
Association Choudhari
DKTE Society's 0230-2421300,

Dr. pvkadole@gmail
Textile & Associate 2439557
5 Kolhapur Maharashtra Shirishkumar Vh .com
Engineering Professor
anbatte
Institute
Product 0422-3933250,
PSG College Of info.int@psgtech
6 Coimbatore Tamilnadu Dr. T Senthilram Development 3933252
Technology .ac.in
Manager
Professor and 011-26591401
Prof. R. S. hodtextile@admi
7 IIT Delhi New Delhi Delhi HOD (Textile
Rengswamy n.iitd.ac.in
Engineering)
Workshop II: Apex Industry Associations and Institutions
Mr. Chetan Assistant 011-23487385,
chetan.bijesure
Bijesure, Ms. Secretary 23738760
@ficci.com,
1 FICCI New Delhi Delhi Annu Ajmani General (Mr.
shreya.bansal@f
and Ms. Shreya Chetan
icci.com
Bansal Bijesure)
Mr. Suvendu Deputy suvendu.mahap 0124-4014060
2 CII New Delhi Delhi
Mahapatra Director [email protected]
Vice President 022-25003098
(Mr. Amit
Mr. Amit
Agarwal) and [email protected],
3 ITTA Mumbai Maharashtra Agarwal and Dr.
Executive [email protected]
Anup Rakshit
Director (Dr.
Anup Rakshit)
011-26863801,
PHD Chamber
Principal ravi.rathod@phd 49545454,
4 of Commerce & New Delhi Delhi Mr. Vivek Seigell
Director cci.in 26855450,
Industry
49545451
Member, mishika.nayyar@
Ms. Mishika
5 Invest India New Delhi Delhi Strategic investindia.org.i 011-23048155
Nayyar
Investment n
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Research Unit
Workshop III: Protech Segment
Vice President
Texport
Mr. Narendra - Innovation & narendra.kajale 022-30809500,
1 Syndicate India Gandhinagar Gujarat
Kajale Business @tsamd.in 080-30007800
Limited
Development
Sr. General
Manager - ajaysharma@lnj 0120-2541810
2 RSWM Ltd. Noida U.P. Mr. Ajay Sharma
New Product bhilwara.com
Development
basant@tarasafe
Tarasafe
3 Managing .in, 079-29704068,
International Kolkata West Bengal Mr Basant Lohia
Director naveen@tarasaf 033-24929410
Pvt. Ltd.
e.in
ak@smgroupindi
S M Group of
Mr. Ashish Executive a.com, 011-26252554,
4 Industries New Delhi Delhi
Kansal Director akansal@smgro 26254275
(SMPP)
upindia.com
Mr. Rahul Divisional 022-28966764,
Urja Products Awaghade, Manager and nmej@urjafabric 28965042
5 Ahmedabad Gujarat
Pvt. Ltd. Mr. Tarun Factory s.com
Jadhav Manager
htldahisar@gmai 022-28966764,
Haren Textiles l.com, 28965042,
6 Mumbai Maharashtra Mr. Harit Mehta Owner
Pvt. Ltd. harentextiles@vs 28964390
nl.com
anurag@saiimpe
Mr. Anurag x.com, 011-26463606,
7 Sai Energy Gurgaon Haryana Director
Singhal [email protected] 0124- 2343249
om
Workshop IV: Meditech Segment
Kob Medical Shanmugavasan
Dr. A. Managing
1 Textiles Pvt. Tiruppur Tamilnadu .Aravamudhan@ 04255-256500
Shanmugavasan Director
Ltd. kob.de
Nobel Hygiene Mr. Kamal Managing kamal.johari@no
2 Mumbai Maharashtra
Pvt. Ltd. Kumar Johari Director belhygiene.com 022-42121314
M/s Mohit and
Eximius info@eximnonw
3 Rajkot Gujarat Apurva Directors 9727755440
Incorporation oven.com
Zalawadia
Product
Kimberly Clarke Developer – Sandhya.W4872 022-33220000 .
4 Pune Maharashtra Ms. Sandhya
Corporation AFC, Kimberly [email protected]
Clarke
Application
Engg 080-30614378,
Prabha Hegde, Manager, [email protected] 66595601,
5 3M India Ltd. Bangalore Karnataka 66595753,
Ph.D. Medical om
Solution 22233704,
48714196,
Division
22231414
Mr. Anurag anurag@ushayar
6 Surya Textech Chandigarh Chandigarh Director
Gupta ns.com 0172-2654531
Venus Safety & Mr. Mahesh mahesh@venuso

7 Mumbai Maharashtra CEO 172-5073813,
Health Pvt. Ltd. Kudav hs.com
2654531
Workshop V: Clothtech, Hometech and Sportech Segments
Techno Mr Sunil Managing sunil@technospo

1 Coimbatore Tamilnadu Jhunjhunwala, 0421-2236838
Sportswear Director rt.in
Managing
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Director
Ganpati Business
Uttar Mr.Ambuj ambuj_knp@redi
2 Interglobe Pvt. Kanpur Development 0512-2400042
Pradesh Aggarwal ffmail.com
Ltd. Manager
Mayur Sr. Vice
Mr. Ramdas
3 Uniquoters Jaipur Rajasthan President [email protected] 0141-2361132,
Acharya
Limited (Technical) 0142-3224001
Ajay Kumar Ajay Kumar ajaypangadiya@
Pangadiya, Pangadiya, tridentindia.com, 0161-5039999
Mohit Soni CEO Mohit Soni
4 Trident Group Ludhiana Punjab mohit.soni@tride
Sales & CEO Sales &
ntindia.com
Marketing Home Marketing
Textiles Home Textiles
Vice President
- Innovation
(Home Umasankar_Mah
Welspun India Umasankar 022-66136000
5 Mumbai Maharashtra Textile); apatra@welspun
Ltd Mahapatra
Business Head .com
- Health &
Hygiene
SBT Textiles vikram.jain@sbtt 7000977174,

6 Raipur Chhattisgarh Mr Vikram Jain Director 7713298904,
Pvt. Ltd. extiles.com
9425209006,
9826131999
9009387000
Freudenberg Senior
Regional Marketing Subhamoy.Baner 080-66901200
Mr. Subhamoy
7 Corporate Bangalore Karnataka Manager- jee@freudenber
Banerjee
Centre India Specialty g-pm.com
Pvt. Ltd. Products
Commercial Vivek.Raj@coats
8 Madura Coats Madurai Tamilnadu Mr. Vivek Raj
Director .com 0120-4526000
Workshop VI: Agrotech, Geotech and Oekotech Segments
sumit.mall@time
1 Times Fiberfill Kolkata West Bengal Mr. Sumit Mall Director
sfiberfill.com 080-48602739
Techfab India (Head - s.vyas@techfabi

2 Mumbai Maharashtra Mr Saurabh Vyas 022-22876224,
Industries ltd. Design) ndia.com
22876225
Strata
Chief
Geosystems Mr. Gautam gautam.dalmia@ 022-40635100
3 Mumbai Maharashtra Development
(India) Private Dalmia strataindia.com
Officer
Limited
adit121@yahoo. 022-65299865,
Jeevan Non Mr. Aditya com, 27697221
4 Mumbai Maharashtra CEO
Woven Agrawal info@jpnonwove
ns.com
9310127279
info@suntechge
Suntech 9285027900,
Rajnandgao Mr.Rachit Managing otextile.com,
5 Geotextile Pvt. Chhattisgarh 7744404919,
n Agarwal Director rachit@thermoc
Ltd. 7744409419,
areindia.com
7744222777
General kamlesh.bhatia
Rishi Techtex Mr. Kamlesh 022-23074897,
6 Mumbai Maharashtra Manager @rishitechtex.co
Ltd. Bhatia 23074585,
(Mktg.) m
23075677
CTM Agro amit@ctmagrote
7 Ahmedabad Gujarat Mr Amit Agarwal CMD
Textiles xtiles.com 079-22165163
8 JFN Fishnet Chennai Tamilnadu Mr. Naveen Owner naveen12483@g
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Manufacturer mail.com , 7871363999,

jfnchennai@gma 9884063999,
il.com 7871263999
Workshop VII: Buildtech, Indutech, Mobiltech and Packtech Segments
Kusumgar
Mr. Ankur ankur.kothari@k
1 Corporates Pvt. Mumbai Maharashtra CEO 022-61125139
Kothari usumgar.com
Ltd.
Senior
Nobletex Manager- sandip@noblete 9586665555,
2 Surat Gujarat Mr. Sandip Nair
Industries Ltd. Business x.in
9824209274
Development
Nirmal fibres Mr. Abhishek abhishek@nirma
3 New Delhi Delhi Director
Ltd. Jain lfibres.com 011-43273200
Mewar Polytex sdoogar@harmo

4 Udaipur Rajasthan Sudhir Duggar Director 0294-2491036,
Limited nyplastics.com
2491736
Khosla Profil Mr. Pramod pramodkhosla@
5 Mumbai Maharashtra Chairman
Private Limited Khosla gmail.com 022-30613061
Emmbi Mr. Makrand makrand.appalw

6 Mumbai Maharashtra CMD 022-46725555,
Industries Ltd. Appalwar [email protected]
67845501
pankajkapoor@p
Park Non Mr. Pankaj Managing
7 Gurgaon Haryana arknonwoven.co 0124-4052880
Woven Pvt. Ltd. Kapoor Director
m
Mr. Yogesh qrexflex@gmail.

8 Q-Rex Flex Surat Gujarat Director 02621-292121,
Vilpara com
292323
Chief
Uttar Mr. Sanjay [email protected]
9 BMD Pvt. Ltd Noida Operating 0120-4390300
Pradesh Sharma m
Officer
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Annexure 35
Citations for Section 28 (Emerging Technologies and technology trends in
technical textiles)
1. Black S (2007) Trends in smart medical textiles. In: Smart Text. Med. Healthc. Mater. Syst. Appl. Elsevier Ltd, pp 3–26
2. schoeller-PCM – Technologies, Schoeller Textiles AG.
3. NuMetrex Adidas miCoach Men’s Training Shirt, Short Sleeve | Running Shoes Guru.
4. e-skin Sleep & Lounge | Xenoma - Smart Apparel Company -.
5. Smart Materials - Wacker Chemie AG.
6. Introducing the Nike Adapt BB - Nike News.
7. will.i.am Debuts Innovative Face Technology Concept, XUPERMASK, in Partnership with Honeywell.
8. Pain Relief Arm Sleeve • 150 hours of use – Nufabrx.
9. Mosquito Menace No More: Indore Couple Make Insect-Repellent Clothes For Kids!
10. Zhang C, Fan W, Wang S, Wang Q, Zhang Y, Dong K (2021) Recent Progress of Wearable Piezoelectric Nanogenerators.
https://doi.org/10.1021/acsaelm.1c00165
11. Lund A, Rundqvist K, Nilsson E, Yu L, Hagström B, Müller C (2018) Energy harvesting textiles for a rainy day: woven piezoelectrics
based on melt-spun PVDF microfibres with a conducting core. npj Flex Electron 2:9
12. Stoppa M, Chiolerio A (2014) Wearable electronics and smart textiles: A critical review. Sensors (Switzerland) 14:11957–11992
13. Microsystems S, Huang P, Wen D, Qiu Y, Yang M, Tu C (2021) Textile-Based Triboelectric Nanogenerators for Wearable.
14. 人の動きを電気エネルギーに変える新素材 | PIECLEX.
15. Innovative Products from Stitch-Bonded-Hydroentangled Nonwoven Composites for Technical Applications.
http://www.technica.net/NT/NT3/StitchBondedHydroentangled.htm. Accessed 16 Jun 2021
16. Wetlace systems. https://www.andritz.com/products-en/group/nonwoven-textile/wetlaid-systems/wetlace-line-nonwoven-and-
textile. Accessed 17 Jun 2021
17. Andrews GL, Silva M, Martin SW, Cooke FT, Iii HCP, Ebelhar MW (2002) 2002 B. Proceedings, Beltwide Cott. Conf. 75:
18. Oerlikon: Efficient production of nonwovens. https://www.textiletechnology.net/nonwovens/news/Oerlikon-Efficient-production-of-
nonwovens-20022. Accessed 17 Jun 2021
19. Technology | Nano Medical s.r.o. https://nanomedical.cz/en/technology/. Accessed 17 Jun 2021
20. NS Technology | Elmarco CZ. https://www.elmarco.cz/ns-technologie. Accessed 17 Jun 2021
21. Iva Mackova I, Saunders T, Vera Soukupova I STRUTO AND ITS INDUSTRIAL APPLICATIONS.
22. Struto International Vertical Lapper Techology. http://www.struto.com/. Accessed 16 Jun 2021
23. Vasile S, Van Langenhove L, De Meulemeester S (2006) Effect of production process parameters on different properties of a
nonwoven spacer produced on a 3D Web Linker®. Fibres Text East Eur 14:68–74
24. Gong RH (2015) Developments in 3D nonwovens. In: Adv. 3D Text. Elsevier, pp 183–203
25. Fangueiro R, Soutinho F (2011) Textile structures. In: Fibrous Compos. Mater. Civ. Eng. Appl. Elsevier, pp 62–91
26. Karl Mayer Malimo To Transfer Nonwovens Technology To Christian Pinkert | Textile World. https://www.textileworld.com/textile-
world/textile-news/2011/09/karl-mayer-malimo-to-transfer-nonwovens-technology-to-christian-pinkert/. Accessed 16 Jun 2021
27. Technical Textiles - KARL MAYER Textilmaschinenfabrik GmbH. https://www.yumpu.com/en/document/read/23770002/technical-
textiles-karl-mayer-textilmaschinenfabrik-gmbh. Accessed 16 Jun 2021
28. Rengasamy RS (2014) Composite nonwovens in wipes. Compos Non-Woven Mater Struct Prop Appl.
https://doi.org/10.1533/9780857097750.89
29. Cotterill PJ (1975) The production and properties of stitch-bonded fabrics. Text Prog 7:101–123
30. New Trends and Developments in Automotive Industry - Google Books.
https://books.google.co.in/books?id=YrqZDwAAQBAJ&pg=PA328&lpg=PA328&dq=KUNIT+and+MULTIKUNIT+are+stitch-
bonded+technologies&source=bl&ots=aTdAI-
P5b_&sig=ACfU3U129azt6xjOZRqfVMADW6C9larNKg&hl=en&sa=X&ved=2ahUKEwjx4L-
XxZvxAhU5lEsFHepfD_cQ6AEwE3oECB8QAw#v=onepage&q=KUNIT and MULTIKUNIT are stitch-bonded technologies&f=false.
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Accessed 16 Jun 2021

31. Hausding J, Cherif C (2012) Application of stitch-bonded multi-plies made by using the extended warp-knitting process: Influence
of pattern and knitting yarn tension on the geometry of the textile fabric. J Text Inst 103:179–192
32. Wambua PM, Anandjiwala R (2011) A review of preforms for the composites industry. J Ind Text 40:310–333
33. Jin L, Hu H, Sun B, Gu B (2012) Three-point bending fatigue behavior of 3D angle-interlock woven composite. J Compos Mater
46:883–894
34. Nawab Y, Kashif M, Asghar MA, Asghar A, Umair M, Shaker K, Zeeshan M (2018) Development & Characterization of Green
Composites Using Novel 3D Woven Preforms. Appl Compos Mater 25:747–759
35. QISO Braided Triaxial Fabric | A&P Technology.
36. 3D Preforms – advanced materials.
37. Dry Fibre Technologies | AMRC.
38. Saint-Gobain acquires RT2i’s 3D knitting technology | Sheergard.
39. Khokar N Making The Uniaxial Noobing Process Industrially Relevant.

40. fureho.
41. Li D, Tao L, Shen Y, Sun B, Xie X, Ke Q, Mo X, Deng B (2020) Fabrication of Multilayered Nanofiber Scaffolds with a Highly Aligned
Nanofiber Yarn for Anisotropic Tissue Regeneration. https://doi.org/10.1021/acsomega.0c02554
42. The WEAV3D® Process for Plastic Composites | WEAV3D Inc.

43. Albany Engineered Composites: Weaving the Future in 3-D | CompositesWorld.
44. Ballistic Vest | Sarkar Tactical, Inc. | Ballistic & Tactical Armor. https://sarkartactical.com/product-category/ballistic-vest/. Accessed
23 Jun 2021
45. Bespoke Bulletproof Suits For Your Style And Safety. https://garrisonbespoke.com/custom-suits/bespoke-bulletproof-suits.
46. Ballistic materials handbook.
47. Tecstar® Flame retardant fiber - Grupo Adi. https://www.adigrupo.com/en/chemical-products/textile/tecstar-fibra-ignifuga/.
48. High LoftTM Fleece | Lightweight Insulation Fabric | Polartec®. https://www.polartec.com/fabrics/insulation/high-loft. Accessed 23
Jun 2021
49. BSL 4 | Protective Clothing | Honeywell Safety.
https://www.honeywellsafety.com/Products/Protective_Clothing/BSL_4.aspx?site=/europe. Accessed 23 Jun 2021
50. Home - Shieldex Trading. https://www.shieldextrading.net/. Accessed 23 Jun 2021
51. Metlon Corporation - Retroglo Reflective Yarn. http://www.metlon.com/retroglo.html. Accessed 23 Jun 2021
52. ATEX Medical Textiles | Medical Fabric Manufacturer | Implantable Medical Textiles. https://www.atextechnologies.com/. Accessed
23 Jun 2021
53. Infection control with highly-absorbent disposable textiles – ASAP Norway AS. https://asap-norway.no/en/industries/health/.
54. Medical Textiles - Haren Textiles. http://harentextiles.in/medicaltextiles/. Accessed 23 Jun 2021
55. Wound care and IV fixation for arm, leg, head and foot |. https://tytex.com/products/wound-care. Accessed 23 Jun 2021
56. SymbotexTM Composite Mesh | Medtronic. https://www.medtronic.com/covidien/en-us/products/hernia-repair/symbotex-composite-
mesh.html. Accessed 23 Jun 2021
57. Monosyn® Quick. https://www.bbraun.co.in/en/products/b1/monosyn-quick.html. Accessed 23 Jun 2021
58. 3M Personal Protective Equipment for Medical. https://www.3mindia.in/3M/en_IN/p/c/ppe/i/health-care/medical/. Accessed 23 Jun
2021
59. Safety Shop | Honeywell. https://www.honeywell.com/us/en/shop/safety. Accessed 23 Jun 2021

60. Seat Belt Webbings Manufacturer | Seat Belt Webbings Suppliers | Goradia Industries. https://www.goradiaindustries.co.in/seat-
belt-webbings-manufacturer/. Accessed 23 Jun 2021
61. Airbag | Products | AUTOMOTIVE SOLUTIONS | TORAY. https://www.automotive.toray/products/detail.html?id=135. Accessed 23
Jun 2021
62. GRUPO COPO Car solutions. https://www.grupocopo.com/en/car-solutions/. Accessed 23 Jun 2021
63. Door Trims | Interior & Exterior | Products | Toyota Boshoku Corporation. https://www.toyota-boshoku.com/global/products/fiber-
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
exterior/door-trim/. Accessed 23 Jun 2021

64. INTUTM - Intelligent Seating | Lear Corporation. https://www.lear.com/technology/seating/advanced-seating-innovation/intu.
65. Guilford Textiles - Seating Solutions | Lear Corporation. https://www.lear.com/technology/seating/core-capabilities/guilford-
textiles. Accessed 23 Jun 2021
66. HexForce® Woven Reinforcements. https://www.hexcel.com/Products/Fabrics-Reinforcements/HexForce-Woven-Reinforcements.
67. Hexcel Woven Reinforcements | Hexcel.
68. GORETM Membrane Filter Sock and Tube assemblies | Tubular Backpulse Liquid Filtration | Gore.
https://www.gore.com/products/fluids-filtration-solutions-for-industrial-processes. Accessed 23 Jun 2021
69. Purefrax® Hot Gas Filter Candles | Products | Unifrax. https://www.unifrax.com/product/purefrax-hot-gas-filter-candles/. Accessed
23 Jun 2021
TM
70. Belt Tech: Conveyor Systems - MAXX ROCK . https://belttech1.com/oriental-for-belt-tech/maxx-rock/. Accessed 23 Jun 2021
71. Flexible Garden Hose, New and Improved (Green) - GrowGreen®. https://www.growgreenbrands.com/products/flexible-garden-
hose. Accessed 23 Jun 2021
72. Coated abrasive and non-woven combi rollers. https://www.osborn.com/en/coated-abrasive-and-non-woven-combi-
rollers/product/EUPSRB002. Accessed 23 Jun 2021
73. Superyacht - Leisure Marine. https://www.englishbraids.com/leisure-marine/superyacht. Accessed 23 Jun 2021
74. Oil and Gas - Toray Advanced Composites. https://www.toraytac.com/markets/industrial/oil-and-gas. Accessed 23 Jun 2021
75. Asahi Kasei Cubit. https://www.asahi-kasei.co.jp/fibers/en/cubit/index.html. Accessed 23 Jun 2021
76. Southern Ropes :: Industrial Soft Shackle. https://www.southernropes.com/recovery-lifting/industrial-soft-shackle/tech-spec.
77. Crop Protection. https://beltonindustries.com/products/beltech-1547/?ref=guide. Accessed 23 Jun 2021
78. Filbio - Leading name in anti-insect netting for outdoor crops. https://www.protection-textile-
agriculture.texinov.com/en/product/filbio/. Accessed 23 Jun 2021
79. Agrotextile protection netting PE30/24.22 | Diatex Agrotextile. https://www.diatex.com/diatex-produit/pe30-24-22-agrotextile-

protection-netting/. Accessed 23 Jun 2021
80. Agrotextile protection netting F1070 | Diatex Agrotextile. https://www.diatex.com/diatex-produit/f1070-agrotextiles-protection-
netting/. Accessed 23 Jun 2021
81. Anti Hail Net - Anti Hail Nets Manufacturer from Vapi. https://www.fortuneagronet.net/anti-hail-net.html. Accessed 23 Jun 2021
82. Mulching agrofibre | Sinta-d. https://sinta-d.com/en/industry/agroindustry/agrofiber-mulching/. Accessed 23 Jun 2021
83. Ökolys GR110 L25. https://www.beaulieutechnicaltextiles.com/en/product-specs/c/2/agro-textiles/s/3/weed-control/p/89/okolys-
gr110-l25. Accessed 23 Jun 2021
84. Foliage Removal Fabric | Thrace Group. https://www.thracegroup.com/tr/en/technical-fabrics/agri-horti-aquaculture/foliage-
removal-fabric/. Accessed 23 Jun 2021
85. Winter frost protection - plant covers - TenCate Industrial Fabrics. https://www.tencateindustrialfabrics.com/en/markets-and-
solutions/horticulture/frost-protection-covers. Accessed 23 Jun 2021
86. Geotextile - DuPontTM Typar®. https://www.dupont.co.uk/brands/typar.html. Accessed 23 Jun 2021
87. Propex Global | PETROMAT® EnviroTM Recyclable Paving Fabric. https://propexglobal.com/solutions/petromat-enviro. Accessed 23
Jun 2021
88. Nonwoven geotextiles – GEOMAT. https://www.geomat.eu/en/nonwoven-geotextiles. Accessed 23 Jun 2021
89. Interdrain GMFL – GEOMAT. https://www.geomat.eu/en/drainage-geocomposites/interdrain-gmfl. Accessed 23 Jun 2021
90. Plaster & Mortar Reinforcement Mesh. http://www.fleximas.co.uk/civils-and-construction/building-meshes/plaster-mortar-

reinforcement-mesh. Accessed 23 Jun 2021
91. ACETube® - hydraulic structures - Geotextile Bags, Tubes and Containers - ACE Geosynthetics.
https://www.geoace.com/products/Geotextile-Bags%2C-Tubes-and-Containers/ACETube®-_-hydraulic-structures. Accessed 23 Jun
2021
92. Geotextile Secutex® for seperation, filtration, protection and drainage. https://www.naue.com/naue-geosynthetics/nonwoven-
secutex-green/. Accessed 23 Jun 2021
93. Jute Geotextile Manufacturer, Jute Geotextile Supplier, Exporter From Noida. https://www.virenderatextiles.com/jute-geotextile-
4035223.html. Accessed 23 Jun 2021
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
Annexure 36
Profiles of key Technical Textile firms in India
1 3M India Ltd.
www.3mindia.in
Type of Company (Public/Private/LLP/Partnership/Sole Proprietorship): Public Ltd.
Segment Clothtech
Products Belts, Brushes, Abrasives, Cartridge rolls, Spiral bands, Sheets and Rolls
Financial Indicators 2020 2019 2018
Sales Revenue (Rs. Crore) 2764.88 2808.76 2580.4
Operating Profit (EBITDA) (Rs. Crore) 339.81 507.6 479.81
Net Profit (Rs. Crore) 218.97 322.99 310.54
Total Assets (Rs. Crore) 2653.24 2493.68 2135.35
Return on Assets (ROA) (in %) 8.25 12.95 14.54
Total Assets Turnover (times) 1.06 1.14 1.23
Net Profit Margin (in %) 7.8 11.37 11.83
2 Abhikriti Impex Pvt. Ltd.
https://www.indiamart.com/agrim-intl-kolkata/aboutus.html
Type of Company (Public/Private/LLP/Partnership/Sole Proprietorship): Private Ltd.
Segment Protech
Industrial jackets, High visibility bib-and-brace clothing, High visibility jacket,
Men's wear, Protective coverall, Cotton trousers, Zippers, Garments accessories,
Products
Cotton long clothes, Flame retardant clothing, Metal buttons, Fishing jacket,
Buckles, Elastic bands
Operating Profit (EBITDA) (Rs. Crore) 0.03 0.1 -0.96
Total Assets Turnover (Times) 2.60 1.13 2.80
3 Admire Fibertex (India) Pvt. Ltd.
https://www.admirefibertex.com/
Segment Agrotech, Meditech, PackTech
Polypropylene Spunbon Nonwoven Fabrics, Laminated non-woven fabrics, UV
Products
treated non-woven fabrics, Industrial clothing, Packaging, Industrial clothing
Net Profit Margin (in %) 5 2.45 1.56
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
4 Aerolux India Ltd.
https://www.aeroluxindia.com/
Segment Hometech, Clothtech (own classification)
Products Blinds, Curtains, Fabrics, Furniture, Umbrella

Sales Revenue (Rs. Crore) 6 7.86 14.22
Operating Profit (EBITDA) (Rs. Crore) -1.52 -1.7 1.36
Net Profit (Rs. Crore) -1.41 -2.11 1.28
Return on Assets (ROA) (in %) -10.38 -15.51 7.94
Net Profit Margin (in %) -20.13 -22.6 7.96
5 Agriyah Safety Gear Pvt. Ltd.
https://www.indiamart.com/agriyah-safety-gear-private-limited/
Segment Protech
Protective cover all, Fire retardant clothing, Safety gloves, Safety jacket,
Products
Industrial garments, Men's vest, Safety footwear
6 Alok Industries Ltd.
www.alokind.com
Segment Protech
Woven fabric, Corrugated pallets, Cotton and Blended yarn, Woven and Knitted
Products garments, Bed linen, Polyester texturised yarn, Technical textiles work wear
fabric

Operating Profit (EBITDA) (Rs. Crore) -13230.07 -2005.54 -2545.23
Net Profit (Rs. Crore) -18215.62 -3,502.44 -3722.8
Return on Assets (ROA) (in %) -98.05 -10.82 -11.39
Net Profit Margin (in %) -324.22 -41.25 -31.44
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
7 Alpha Foam Ltd.
http://www.alphafoam.co.in/
Type of Company (Public/Private/LLP/Partnership/Sole Proprietorship): Unlisted Public Ltd.
Segment Packtech, Mobiltech
Products Nonwoven fabrics, Plastic component, Seating system
8 Alps Industries Ltd.
https://www.alpsindustries.com/
Segment Hometech
Products Yarn, Home textiles, Readymades, Automotive textiles
Net Profit (Rs. Crore) -115.1 -85.64 -115.89
9 Ambica Jute Mills Ltd.
https://www.indiamart.com/ambica-jutemills-limited/aboutus.html
Segment Geotech
Jute fabrics, Food grade bag cloth, Jute sack bags, Yarn and Twine, Floor
Products covering, Garden twine, Webbing, Carpet and Net twine, Mosquito curtain and
Towel, Dress material, Sheeting, Selvedge yarn, Garment stitching

_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
10 Anil Fashions Pvt. Ltd.
https://www.indiamart.com/anil-fashion-gujarat/profile.html
Segment Meditech
Face masks, Nitrile gloves, Surgical masks, Denim fabric, 3 ply face mask, Face
Products
shield, Surgical and Isolation gowns

11 Arex Industries Ltd.
https://www.arex.co.in/
Segment Clothtech
Products Woven labels

12 Aroo Pvt. Ltd.
https://economictimes.indiatimes.com/company/aroo-private-limited/U74999KA2017PTC099469
Segment Protech
Hot and Cold rolled sheet, coated coils, tubes, rebars, wire rods, agricultural
Products
equipments
Sales Revenue (Rs. Crore) 0 0 0
Net Profit Margin (in %) N.A. -1446.61 -4.79
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
13 Arrow Technical Textile Pvt. Ltd.
https://www.arrowtechnicaltextiles.co.in/
Segment Indutech
Fiberglass cloth, Structural strengthing materials, High silica fibers, Carbon fibers,
Basalt fibers products, Fiberglass product, Filter cloth, Waterproofing material for
Products construction, Antistatic fiber, Nonwoven fabric, High strength fiberglass, Hybrid
woven fabric, Insulation cloth, Anti static cloth, Fiber glass fabric, Filter felt,
Chemical anchor, Aramid fabric, Stainless steel fiber, Quartz fiber yarn

14 Arvind Ltd.
https://www.arvind.com/
Segment Geotech, Indutech, Protech
Products Denim, Wovens, Knits, Filtration and Conveyor belting, Composites
15 Aureole Inspecs (India) Pvt. Ltd.
https://www.aureoleinspecs.com/
Segment Protech, Sportech
Personal protection goggles, Personal protection goggles gen II, Safety goggles
Products MK II, Healthcare goggles, Protective face shield, Ballistic goggles, Snow
goggles, Ballistic snow goggle, Thermal insole
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
16 Auto Liv India Pvt. Ltd.
https://www.indiamart.com/autoliv-india-pvt-ltd/
Segment Mobiltech
Airbags, Pyro safety switches, Automatic bolt release, Integrated child booster
Products seats, Steering wheels, Active hood lifters, Pedestrian protection airbag, Life cell
airbag, Torricelli brake, Retractors seatbelts
17 Autotech Nonwovens Pvt. Ltd.
https://www.autotechnonwovens.com/
Segment Clothtech, Indutech, Mobiltech
Products Headliners, Floor carpets, PPS, Mattress, Composites
Net Profit (Rs. Crore) 0.12 -3.78 -1.14
Return on Assets (ROA) (in %) 0.13 -4.29 -1.46
Net Profit Margin (in %) 0.26 -10.78 -6.57
18 BKS Textiles Pvt. Ltd.
http://www.bkstextiles.in/
Segment Protech
Products Coated fabrics and Finished products

Net Profit (Rs. Crore) 1.16 5.07 -2.37
Return on Assets (ROA) (in %) 0.69 3.36 -1.64
Net Profit Margin (in %) 0.71 3.78 -1.94
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
19 Borda Fabrics Pvt. Ltd.
https://www.indiamart.com/borda-fabrics-limited/profile.html
Segment Protech
Polyester fabric, 300 D polyester fabric, Waterproof lining polyester fabric,
Polyester shower curtain fabric, 3 pass polyester blackout curtain, Bed linen,
Table cloths and Napery, Soft luggage inner lining coated polyester fabrics,
Products
Luggage lining polyester fabrics, Car cover polyester fabrics, Polyester sun
umbrella awning shades and Tarpaulin fabrics, Polyester oxford outdoor fabrics,
PU coated horse rug polyester fabrics
Net Profit (Rs. Crore) -0.01 0.05 0.1
Return on Assets (ROA) (in %) -0.11 0.76 1.45
Net Profit Margin (in %) -0.28 1.02 1.71
20 Capitol Nonwovens Pvt. Ltd.
https://www.capitolnonwovens.com/capitol_nonwovens_contact.php
Segment Geotech
Nonwoven geotextiles, Geobags for flood control and Shore protection, Needle
Products
punched nonwoven fabric, Filter fabrics, Water-proofing and Insulation fabrics
Operating Profit (EBITDA) (Rs. Crore) 0.15 -0.03 0.98
21 Carborundum Universal Ltd.
https://www.cumi-murugappa.com/
Segment Indutech
Products Abrasives, Electro minerals, Industrial minerals, Super refractories

_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
22 Centennial Fabrics Ltd.
https://www.centfab.com/
Segment Agrotech, Buildtech
Products Tarpaulins, Tents, PVC coated fabrics
23 Century Enka Ltd.
https://www.centuryenka.com/
Segment Mobiltech
Products Nylon filament yarn, Nylon tyre cord fabrics
24 Charminar Non-woven Ltd.
https://www.indiamart.com/charminar-nonwovens-ltd/aboutus.html
Segment Geotech
Nonwoven filter fabrics, Nonwoven geotextiles, Nonwoven geobags, Nonwoven

Products
filter bags, Geotube, Nonwoven geotextiles, Charm nonwoven geomat

_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
25 Chola Packaging Pvt. Ltd.
https://www.indiamart.com/chola-packaging-limited/
Segment Agrotech
Products Leno bags, Leno mesh bag, PP leno bag, PP vegetable leno bags
26 E.I. Dupont Pvt. Ltd.
https://www.dupont.co.in/personal-protective-equipment.html
Segment Protech
Heat and Flame protection, Cut and Mechanical protection, Contamination and
Products Bioburden protection, Dust and Particle protection, Arc flash protection,
Chemical/HAZMAT protection, Body armor, Vehicle armor
Sales Revenue (Rs. Crore) 1018.58 713.18 NA
Operating Profit (EBITDA) (Rs. Crore) 33.88 60.32 NA
Net Profit (Rs. Crore) 169.68 62.52 NA
Total Assets (Rs. Crore) 1649.16 2235.8 NA
Return on Assets (ROA) (in %) 10.29 2.8 NA
Total Assets Turnover (Times) 0.75 0.32 NA
Net Profit Margin (in %) 13.78 8.68 NA
27 Entremonde Polyecoaters Ltd.
http://www.entremonde.com/
Segment Buildtech
PVC coated covers/tarpaulins, Speciality fabrics, Roofs and Canopies, Bonded
Products
fabrics
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
28 Flexituff Ventures International Ltd.
http://flexituff.com/home/
Segment Geotech, Oekotech
FIBC bags, BOPP woven bags, Non woven floor coverings carpets, Synthetic
Products
leather substrate, Interlining for apparel, Non woven filter fabrics, Drippers

29 Foam Mattings (India) Ltd.
https://www.fomil.com/
Segment Hometech
Products Doormats, Broadlooms, Juteloop carpets
30 Freudenberg India Ltd.
https://www.freudenberg-pm.com/en
Segment Clothtech
Products Non-woven fabric, Fibre, Smart textiles

_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
31 Garware Technical Fibres Ltd.
https://www.garwarefibres.com/
Segment Agrotech, Geotech, Sportech
Acquaculture cage nets, Fishing nets, Sports nets, Safety nets, Agricultural nets,
Products
Coated fabrics, Polymer ropes, Geosynthetics
Sales Revenue (Rs. Crore) 944.72 1,017.82 885.5
Net Profit (Rs. Crore) 178 125.61 105.12
Total Assets (Rs. Crore) 1,203.70 1,076.93 983.97
32 Ginni Filaments Ltd.
http://ginnifilaments.com/
Segment Hometech
Products Yarn, Fabric, Nonwoven spunlace fabric, Filtration membrane

Sales Revenue (Rs. Crore) 808.18 703 764.68
33 Ginni Spectra Pvt. Ltd.
https://www.ginnispectra.com/
Segment Clothtech, Geotech, Indutech
Nonwoven geotextile, Nonwoven filter media, Cotton wadding, Needle punch felt,
Insulation fabrics, Poly wadding polyfill, Vaccum packed cushion pillows, Flame
Products retardant barrier fabrics, Geotextile fabrics, Organic cotton batting, Polyester slit
felt, Acoustic insulation boards, PP spunbond nonwoven fabric, Geogrids, Shoe
felts needle punch, Bamboo fabrics, Geonets, Semi linen spun fabrics

_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
34 Giridhar Techfab Pvt. Ltd.
https://www.gtf.co.in/
Segment Geotech
Composite grid, Fiberglass reinforcement geogrids, Water proofing paving mat,

Products
Tack film mat, Stiff and Composite grid

Operating Profit (EBITDA) (Rs. Crore) -0.28 2.49 0.86
35 GKD India Ltd.
https://www.gkd-group.com/in-en/about-gkd-india/
Segment Buildtech, Indutech
Products Industrial mesh, Process belts, Metal fabrics
36 Grindwell Norton Ltd.
https://www.grindwellnorton.co.in/
Segment Indutech
Abrasives, Silicon carbide, Performance ceramics and Refractories, Performance

Products
plastics, ADFORS

_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
37 Gtex Fabrics Pvt. Ltd.
http://gtexfabrics.com/
Segment Clothtech, Hometech, Indutech, Meditech, Mobiltech
Products Synthetic leather, Artificial leather, Leatherette, PVC leather
Sales Revenue (Rs. Crore) 2.51 0 0
Net Profit Margin (in %) -60.09 - -
38 Haren Textiles Pvt. Ltd.
http://harentextiles.in/
Segment Buildtech, Protech
Woven fabrics, Luggage and Bag fabrics, Defence polyester and Nylon fabrics,
Products Footwear wrap knit fabrics, Outdoor polyester and Nylon breathable coating
fabrics, Automobile seat cover fabrics, Apparel fabric, Performance apparel

39 Hunter Douglas India
http://www.contacthdi.com/
Segment Hometech
Products Architectural products
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
40 Jacquard Fabrics India Pvt. Ltd.
https://www.zaubacorp.com/company/JACQUARD-FABRICS-INDIA-PRIVATE-LIMITED/U18101TZ2007PTC013595
Segment Hometech
Products Tapes, Woven ticking, Engineered borders, Knit ticking

Operating Profit (EBITDA) (Rs. Crore) 8.81 8 7.83
Total Assets (Rs. Crore) 46.65 46.27 46
41 JCT Ltd.
https://www.jct.co.in/
Segment Geotech, ProTech
Wide width sheeting, Dyed bottom-weight twills, Dyed shirting twills, Natural
Products twills, Canvas and Flannels, Flat yarn on COP, Textured/crimp yarn, Partially
oriented yarn, Fully oriented yarn, Fully drawn yarn, Dyed yarns, Nylon 6 chips

Return on Assets (ROA) (in %) -5.26 -11.03 -6
42 Johnson & Johnson Ltd.
https://www.jnj.in/
Segment Meditech
Self care, Skin health/beauty and essential health products, Orthopaedics,

Surgery, Interventional solutions medical devices, Immunology, Cardiovascular
Products
and Metabolic disease, Pulmonary hypertension pharmaceutical products,
Infectious diseases and Vaccines, Neuroscience, Oncology products

Operating Profit (EBITDA) (Rs. Crore) 1264.35 992.12 962
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
43 Khator Technical Textiles Ltd.
https://www.kttl.in/
Segment Geotech
Nonwoven geotextiles, Woven geotextiles, Pavement fabrics, Geodrain, Geobag,
Products
Geotube
44 Khosla Profil Pvt. Ltd.
https://puritytex.com/about/
Segment Indutech
Woven/nonwoven liquid filtration, Dry filtration, Antistatic filter media, Belt filter,
Products
Airslide fabrics
45 Kimberly India Ltd.
https://www.kimberly-clark.com/en-us/locations/india
Segment Meditech
Products Napkins, Scientific PPE, Wipers, Hand towels, Dispensers
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
46 Kirti Filtration & Automation Pvt. Ltd.
https://www.kirtifiltration.com/index.html
Segment Indutech
Air/dust filtration, Liquid/solid separation, Bellows, Paint booth filters, Specialized

import substitute filter, Solenoid valve, Gas valves products, Ball valves, Butterfly
Products
valves, Pneumatic on/off valves, Pharma and Diaphragm seated valves, Control
valves, Actuators, Angle seated valve, Switch boxes

Sales Revenue (Rs. Crore) 1.92 1.58 1
47 Kob Medical Textiles Pvt. Ltd.
https://www.kob.de/india/
Segment Meditech
Short/long stretch bandages, Zinc paste bandages, Layer systems, Elastic
adhesive bandages, Cohesive/non-cohesive support bandages, Cooling and
Products
Compressing sports bandage, Fabrics for first aid dressings, Cohesive/non-
cohesive/tubular fixation bandages
48 Kusumgar Corporates Ltd.
https://www.kusumgar.com/
Segment Buildtech, Geotech, Sportech
Military fabrics, Aeronautical fabrics, Outdoor fabrics, Workwear fabrics,
Products
Industrial fabrics, Automotive fabrics, Medical fabrics, Custom fabrics
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
49 Mac Decor Ltd.
https://www.mac.in/
Segment Hometech, Meditech
Products Blinds, Curtain system, Awnings, Woven vinyl floorings, UPVC windows
Sales Revenue (Rs. Crore) 0.01 0 0
Return on Assets (ROA) (in %) 10 -10.14 -2.14
50 Maccaferri Environmental Solutions
https://www.maccaferri.com/in/
Segment Geotech
Products Articulated concrete block mattresses, Gabions, Geocomposites, Geogrids, Geomats

Operating Profit (EBITDA) (Rs.
1.87 20.85 20.67
Crore)
51 Madhuram Fabrics Pvt. Ltd.
https://www.indiamart.com/madhuramfabrics/profile.html
Segment Clothtech, Protech
Polyester taffeta fabric, Nylon fabric, Microfiber fabric cloth, Nomex fabrics,
Micro polyester fabric, Coated fabrics, Scrim fabric, Cotton-nylon fabric,
Products Nylon air textured fabric, Cordura fabric, Aramid fabrics, Tent cloth,
Umbrella fabric, Polyester canvas, Awning fabric, Polyurethane coated
fabric, PVC coated fabrics
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
52 Madura Industrial Textiles Ltd.
http://www.maduratex.com/index.html
Segment Indutech
PA6/nylon 6 chips, PA6/nylon 6 yarns, Tire fabrics, Conveyor belting

Products
fabrics, Specialty fabrics, Coated fabrics

53 MAF Clothing Pvt. Ltd.
https://www.mafclothing.com/
Segment Meditech, Hometech, Clothtech

PPE coverall and Hazmet suit, Mask, Gown, Gloves and Face shield,
Products Hospital bedsheet, Shoe covers, Bed sheet, Home furnishings,
Men/women/kids apparels
54 Mahavir Spinfab (P) Ltd.
https://mahavirspinfab.com/index.html
Segment Protech
Flame resistant fabric, High visibility fabric, Anti static fabric, Metal splash
Products safe fabric, AL safe fabric, ARC safe fabric, Weld safe fabric, Oil and Gas
safe fabric, Multi functionality fabric
Operating Profit (EBITDA) (Rs. Crore) 7.75 5.49 5
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
55 Manas GeoTech India Pvt. Ltd.
http://manasgeotextile.com/
Non-woven geotextile for pasting, non-woven geotextile for PVC pipe

Products
wrapping, Geo bag, Geo composite

56 Masturlal Pvt. Ltd.
https://www.masturlal.com/
Segment Indutech
Polyester/acrylic/antistatic needle felt, High temperature filtration

Products
equipments, Goyen valves, Mecair valves, Ropes

57 Mecords India Ltd.
http://www.mecordsindia.com/index.html
Segment Indutech
Chafer fabrics, Dipped nylon wicking/wick proof chafer, Tacky bead
wrap strip, Cap ply, Flipper fabric, Conventional liners, Specialty
Products
liners, Reinforcing fabrics, Filter fabrics and Filter bags, Impression
fabrics
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
58 Mewar Polytex Ltd.
http://www.mewarpolytex.com/index.html
Segment Packtech
Silt fence, Spiral tubing, Ground covers, Bale sheets, Bale
box/wrapes/caps, Multi-purpose woven bags, Gusset bags, Bags
Products
with varied open style, Bags with liner, Transparent bags,
Multicoloured printed bags
59 Microfiber Corp. Pvt. Ltd.
https://microfibercorp.com/
Segment Geotech, Meditech, Packtech
Aura-pro nonwoven fabric for Landscaping, Filtration, Construction,
Products
Geotextiles and Roofing
Return on Assets (ROA) (in %) 2.07 1 -0.003
60 Montex Glass Fibre Industries Pvt. Ltd.
https://www.montex.co.in/
Segment Buildtech, Indutech
Loomstate fabric, Loomstate mesh, Coated fabric, Coated mesh,
Products
Laminated fabric, Filter bag
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
61 Nirmal Fibres Ltd.
http://www.nirmalfibers.com/
Segment Hometech
Polyester staple fibre, Polypropylene staple fiber, PP spun bond non-woven
Products
fabric, PVC/PU coated synthetic leather
62 Nobel Hygiene Pvt. Ltd.
https://www.nobelhygiene.com/
Segment Meditech
Adult diaper, Underpad, Insert pad, Maternity pad, Baby diaper, Nappy
Products
pad, Changing mat
63 Nobletex Industries Ltd.
http://www.nobletex.in/Technical-Textiles/Coated-Fabrics
Segment Buildtech
Armed forces fabrics, Outdoor fabrics, Luggage and Backpack fabrics, PVC
Products coated fabrics, PU coated fabrics, MediTech fabrics, Print media fabrics,
Specialty custom fabrics
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
64 Nuftab Technical Textiles Pvt. Ltd.
https://www.nufabnonwovenfabric.in/
Segment Clothtech, Meditech, Packtech
Nonwoven fabric, Nonwoven fabric roll, Nonwoven bag, Microdot fusible
Products
interlining, Face masks, Reflective jackets
65 Obeetee Textiles Pvt. Ltd.
https://www.indiamart.com/obeetee-textil/
Segment Hometech, Mobiltech
Flat floor cover, Structure floor cover, Random velour fibre, Filters
Products polyester fibre, Geotextiles fibre, Domestic felts fibre, Automotive felts
fibre
Sales Revenue (Rs. Crore) 214 160.66 152.83
66 Oriental Weaving & Processing Mills Pvt. Ltd.
https://www.indiamart.com/oriental-weaving-processing/aboutus.html
Type of Company (Public/Private/LLP/Partnership/Sole Proprietorship) : Private Ltd.
Segment Protech
Aircrew parachute, Combat free fall parachute, Spin recovery parachute,
Recovery parachute, Cargo parachute, Break parachute, Suiting and
Products Shirting, Space payload recovery, Control aerial delivery system, Aerostat
systems CFF systems, Parachute harness, Industrial fabric
(coated/uncoated)
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
67 Pacific Harish Industries Ltd.

http://www.pacificharish.com/index.html
Segment Geotech, Hometech, Indutech, Mobiltech, Sportech
Automotive interior, Filtration, Shoe liner, Activated carbon, Industrial
Products
nonwoven, Regenerated polyester fiber
68 Par Filters Pvt. Ltd.
https://www.parfilters.com/
Segment Agrotech, Clothtech, Geotech, Indutech
Technical fabrics, Bag filters, Dust collection bags, Air filters, Filters
Products
cartridges, Water filters
69 Park Nonwoven Pvt. Ltd.
https://www.parknonwoven.com/
Segment Geotech, Mobiltech
HVAC/HEPA/ULPA air filter media, PP melt blown filter fabric, Jute felt,
Dust bag filter media, Activated carbon melt blown filter media, PP
spunbond fabric, Parklite acoustic insulation Melt blown fabric, Acoustic
Products
and Heat insulating material, DV 500 silica blanket, PP filter media for
respirator, Nonwoven fabric, Breather fabric, Thermoplastic and Needled
punch felt

Sales Revenue (Rs. Crore) 84.46 78.65 65
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
70 Parry Enterprises India Ltd.
http://www.peil.in/
Segment Agrotech
Animal net, Anti bird net, Anti hail net, Braided rope, Polymer rope,
Products
Fibreglass net, HDPE rope
71 Premco Global Ltd.
https://www.premcoglobal.com/
Segment Clothtech
Name tapes and Plain tapes, Button holes, Rigid tapes and Medical tapes,
Products
Panty and Shoulder elastics
72 Proctor & Gamble Ltd.
https://in.pg.com/
Segment Meditech
Products Diapers, Napkins

_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
73 Qrex Flex Pvt. Ltd.
http://qrexflex.com/
Segment Buildtech
Frontlit flex banner, Backlit flex banner, Back banner, coated flex banner,
Products
Blockout flex banner, Industrial coated tarpaulin
74 Radiant Fibertech Pvt. Ltd.
https://www.radiantfibertech.com/
Segment Packtech
PP spunbond nonwoven fabric, Supersoft spunbond nonwoven fabric,
Laminated spunbond nonwoven fabric, Speciality spunbond nonwoven
Products
fabric, Hydrophilic and Hydrophobic spunbond nonwoven fabric, PP
meltblown nonwoven fabric
75 Rajdhani Syntex Pvt. Ltd.
https://rajdhanisyntex.in/
Segment Geotech, Mobiltech
Decoration colour felts, Weed stop and Root barrier felts, Automative,
Products Shoe and Other industrial application felts, Geosynthetics, Polyester
wadding, Nonwoven carpets, Fibre comfort products
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
76 Rajdhani Universal Fabrics Pvt. Ltd.
https://www.rufsangli.com/
Segment Buildtech
Products Industrial fabrics, Defense force fabrics, Tote bags, Saddle bags

77 Raman Fibre Science Pvt. Ltd. New name: H&V Advanced Materials (India) Pvt. Ltd.
https://mysore.infoisinfo.co.in/card/raman_fibre_science_pvt_ltd/3355891
Segment Indutech
Products Hepa filters, Lead acid battery
78 Reliance Industries Ltd.
https://www.ril.com/
Type of Company (Public/Private/LLP/Partnership/Sole Proprietorship): Public Ltd
Segment Hometech
Products Fabrics, Auto furnishings
Sales Revenue (Rs. Crore) 3,50,880 3,84,904 3,05,335
Operating Profit (EBITDA) (Rs. Crore) 51,853 58,257 51,741
Net Profit (Rs. Crore) 30,903 35,163 33,612
Total Assets (Rs. Crore) 968912 775745 617525
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
79 Rishi Techtex Ltd.
https://www.rishitechtex.com/
Segment Agrotech
Products Shade nets, Woven bags
Net Profit (Rs. Crore) 1 2.92 2.53
80 S.L. Banthia Textiles Industries Pvt. Ltd.
https://www.slbanthia.com/index.html
Segment Clothtech, Packtech
Tents fabrics, PU coated fabrics, Truck tarpaulins fabrics, Train cargo
covers, Sleeping bags fabric, PVC coated fabrics, Roof awnings fabrics,
Rainwear fabrics, Pouches and Accessories fabrics, Pond liners fabrics,
Products
Playground inflatables, Rucksack fabric, Punching bags fabrics, Sports and
Leisure fabrics, Lining material fabrics, Car covers fabrics, Playground mats
fabrics
81 Saint-Gobain Ltd.
https://www.gyproc.in/
Segment Buildtech, Hometech, Indutech
Plaster boards, Metal framing and Accessories, Gypsum plasters, Ceiling
Products tiles, Jointing and Finishing, Acoustic Fabric, Furniture fabric and other
coated fabric, Coated abrasives
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
82 Savla Laminated Ltd.
https://savlalaminates.com/
Segment Buildtech, Mobiltech, Packtech
Canopy fabrics, Inflatable fabrics, Jeep hood fabrics, Luggage fabrics,

Products Carry-on luggage bag, PVC laminated fabrics, School bags fabrics, Seat
cover fabrics, Tarpaulin material, Water proof canvas tarps

83 Shree Ram Cotspin Pvt. Ltd.
https://www.indiamart.com/shree-ram-cotspin/sitenavigation.html
Segment Agrotech, Geotech, Meditech
Products Jute pots, Jute flower pots, Jute handicrafts

84 Shri Ambica Polymer Pvt. Ltd.
https://ambicapolymer.com/
Segment Agrotech, Geotech
Products Ground cover, Shade net, Geotextile, Planter bags

_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
85 Shri Jagdamba Polymers Ltd.
https://www.shrijagdamba.com/
Segment Geotech, Packtech
PP woven bags, Fabric, FIBC, Box bag, Siltfence, Geotextile, Ground cover,
Products
Lumber cover
86 Shubh Swasan (India) Pvt. Ltd.
https://www.shubhswasan.com/
Segment Buildtech, Protech, Meditech
Laminations, Interlining, Waterproof breathable fabrics, Chemical and
Products
Adhesives, Shoe and Leather garments
87 Sidwin Fabric Pvt. Ltd.
http://www.sidwinfabrics.com/
Segment Agrotech
PP spun bond non-woven fabric, laminated non-woven fabric, Hydrophilic

Products and Hydrophobic non-woven fabric, Functional non-woven fabric, UV
treated non-woven fabric

_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
88 SKAPS Ltd.
https://skaps.com/
Products Geotextile, Geonet, Geocomposite, Geomembrane, Geogrid, Fiberglass
89 Sky Industries Pvt. Ltd.
https://skycorp.in/
Segment Clothtech
Products Spring washer, Cotton pin, Hook and loop fasteners
90 SRF Ltd.
https://www.srf.com/
Segment Buildtech, Mobiltech
Products Tyre cord fabrics, Belting fabrics, Polyester industrial yarn

_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
91 Strata Geosystems
http://www.strataindia.com/
Segment Geotech
Products SGB grid, StrataGrid, StrataWeb, StrataBase
Net Profit Margin (in %) 7.54 7 7
92 Supreme Nonwovens Ltd
https://www.supremegroup.co.in/
Segment Meditech
Products Nonwovens, Automotive, Nowonext
93 Tata Advanced Materials Ltd.
www.tamlindia.com
Segment Protech
Products CNC machining products, Water jack cutting machine
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
94 TechFab India Ltd.
https://www.techfabindia.com/
Segment Geotech
Geogrids, Nonwoven geotextile, Woven geotextile, Geocell, Reinforced

Products nonwovens, Gabions, Geo composites, Geotextile bag tubes, Polymeric
strip, PP staple fibre, Geomattress

95 Techno Sportswear Pvt. Ltd.
http://technosport.in/aboutus.html
Segment Sportech
Men sports t-shirts, Leggings for women, PPE kit, Disposable face mask,
Products
Shirts, Cotton leggings, Sports wear and Goods
96 Terram Geosynthetics Ltd.
https://www.terramgeosynthetics.com/
Segment Geotech
Geotextiles, Bodpave, Trackbed separators, Truckpave, Inbitex,
Products
Protectamesh
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
97 Texel Industries Ltd.
https://www.geotexelin.com/
Segment Agrotech, Geotech
Geomembrane, Agrosheet, Azollabed, Geotube, Vermibed, Geotank, Grow
Products
bags
98 Topline Commodities Pvt. Ltd.
https://www.indiamart.com/topline-commodities-pvt-ltd/aboutus.html
Segment Buildtech, Clothtech
Products Rexin, Leather fabric

Operating Profit (EBITDA) (Rs. Crore) 1.78 -6.22 -6.17
99 UNIMIN India Ltd.
http://www.uniminindia.com/
Segment Clothtech
Products Non-woven fabrics
Sales Revenue (Rs. Crore) 0.42 0 0.23
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
100 Urja Products Pvt. Ltd.
https://urjafabrics.com/
Segment Protech
Fiberglass fabrics, Aluminium filtration, Filterbag baghouse, PTFE conveyor
Products
belts
101 Welspun India Ltd.
https://www.welspunindia.com/
Segment Hometech, Indutech, Meditech
Products Bedding solutions, Bath solutions, Advanced textiles, Flooring solutions
102 Winner Weaving Mills Pvt. Ltd.
https://www.indiamart.com/company/75704/aboutus.html
Segment Indutech, Mobiltech
HDPE net fabric, Mono filament net, Woven agro net, Agricultural shade
Products net, Monofilament agro insect net, Agricultural shade insect net, Woven
agro insect net, HDPE net insect fabric
_______________________________________________________________________________________________

Annexures
___________________________________________________________________________________________________
103 YKK Zip Fasteners Pvt. Ltd.
https://www.ykkindia.com/
Segment Clothtech
Products VDE and VDJ zipper
_______________________________________________________________________________________________

References
1. A Brief History of ‘Investability DNA’ in Incubation and Acceleration, Alex Prather, 2018
2. Annual Report, Ministry of Textiles, Government of India, 2020-2021
Technical Textile Market- Global Market Opportunity Analysis and Industry Forecast, 2020-2027
3. Army Eyes Domestic Technical Textile Producers, TechnicalTextile.net, 2015.
4. ATI, Top 10 Textile Companies in China, 2018
5. Baseline Survey of the Technical Textile Industry in India by Office of the Textile Commissioner, 2016
6. CCEA approves Creation of National Technical Textiles Mission, Press Information Bureau, 2020
7. Centre for Monitoring Indian Economy (CMIE Prowess) Database
8. List Of 207 Technical Textile Items, Notification No. 54/2015-2020-DGFT, Directorate General of Foreign
Trade, Department of Commerce, GOI, 2019
9. Enhancing Exports of Technical Textiles, EXIM Bank, 2018
10. Foreign Direct Investment Scenario in Indian Textile Sector, Wazir Advisors, 2016
11. Global Textile, Apparel, and Sporting Goods Team: Technical Textiles Resource Guide, Department of
Commerce, United States of America, 2020
12. Government of India’s Initiatives in Technical Textiles & Notification of HSN Codes for Technical Textiles
by Ministry of Textiles, Government of India, 2019 (MOT)
13. Grand View Research (GVR) Industry Analysis, Technical Textiles Market, 2020
14. http://texmin.nic.in/about-us/textile-research-associations
15. https://www.manakonline.in
16. IBIS World, Technical Textiles Manufacturing in Germany, Industry Trends 2015-2020
17. Incubation in India: A Multilevel Analysis, Indian Institute of Management, Ahmedabad, March 2020
18. Indian Textiles and Apparel Industry Analysis, India Brand Equity Foundation, 2021
19. Invest India, Technical Textiles: The Future of Textiles, 2019
http://ittaindia.org/
20. Ministry of Textiles, Government of India
21. Report on the First Indian Navy-ITTA Clothing and Footwear Seminar, ITTA, 2016
22. Technical Textiles: The Future of Textiles, Invest India, 2020
23. Textile Industry & Market Growth in India, India Brand Equity Foundation, 2021
24. Textilegence, Global Technical Textiles Market, 2020
25. The History of Business Incubation, Vasily Ryzhonkov, 2013
26. The Textile Magazine, ‘China and India to remain lucrative markets for Technical Textiles Globally’, 2015
27. Unique Exim, Karnataka- Textile Policy 2020-25 for MSME and Large Industries
28. World Integrated Trade Solutions (WITS) Database, UN Comtrade Database, ITC trade map
29. www.bis.gov.in
Research Team at IIT Delhi
Prof. Smita Kashiramka is an Associate Professor in the area of Finance at the Department of Management Studies, IIT
Delhi. She holds a Ph.D. from Birla Institute of Technology and Science, Pilani, Pilani Campus. She has more than fifteen
years of academic and research experience. Her areas of teaching interest include Corporate Finance, Financial
Institutions and Markets, Banking, and Mergers & Acquisitions. She has been invited for guest lectures by several eminent
institutions including the Indian Institute of Foreign Trade, New Delhi, IIM Raipur, University of Petroleum and Energy
Studies, Dehradun. She has published papers in several international and national journals of repute including those listed
in the Australian Business Deans Council list, Scopus, and ABS Journal Quality List. She has also presented several papers
in international peer-reviewed conferences. She has worked on several research projects funded by organizations of
international and national repute including Bill and Melinda Gates Foundation, Ministry of Human Resource Development,
Government of India and Ministry of Agriculture and Farmers Welfare, Government of India. She has also organized and
conducted training programs for international participants as well as government institutions including the Airports
Authority of India, Hindustan Zinc Limited, Tshwane University of Technology, South Africa.
Prof. Abhijit Majumdar is a Professor in the Textile Engineering group at IIT Delhi. He graduated from Calcutta
University in 1995 with first class first position in the Textile Technology program. Subsequently, he acquired an M.Tech
degree in Textile Engineering from IIT Delhi and Ph.D. in Production and Operations Management from Jadavpur
University, Kolkata. He also holds an MBA from IIT Delhi with a specialization in Operations Management. He has worked
in industries like Voltas Limited and Vardhman Group. He has published 75 research papers in international refereed
journals and guided six Ph.D. students. His research areas include protective textile materials, soft computing applications,
operations, and supply chain management. He has authored a textbook entitled 'Principles of Woven Fabric
Manufacturing' published by CRC press. He has also edited two books published by Woodhead Publisher, U.K., and
authored one monograph (Textile Progress) published by Taylor and Francis. He is the associate editor of the Journal of
the Institution of Engineers (India) Series E (Chemical and Textile Engineering) published by Springer. He is a recipient of
the Outstanding Young Faculty Fellowship (2009-2014) of IIT Delhi, Teaching Excellence Award (2015) of IIT Delhi, and
Gandhian Young Technological Innovation Award (2017).
Prof. Arpan Kumar Kar is an Associate Professor of the Information Systems area in the Department of Management
Studies, IIT Delhi. He has extensive experience in teaching, training, consultancy, and research. He has published over
120 high-impact articles, 6 books and has over twelve hundred citations for his research. He is a member in multiple
Advisory Committees of Central Government Ministries and Universities. Before joining IIT Delhi, he has earlier taught in
IIM Rohtak as Assistant Professor. Prior to joining academia, he has worked in IBM Research Lab and Cognizant Business
Consulting. He has provided research-driven advisory services to leading MNCs and Government Departments / Ministries
in India and globally through funded projects and consultancies of around 5 Crores INR. He has received multiple awards
and recognitions from reputed organizations like Elsevier, IFIP, I3E, IIT Delhi, IIM Rohtak, PMI, AIMS, TCS, Jadavpur
University, etc.
Prof. Biswajita Parida is an Assistant Professor in the Marketing area at the Department of Management Studies at IIT
Delhi. She is a fellow of the IIM Ahmedabad. She has taught at various B-schools including XLRI Jamshedpur, IIM
Sambalpur, and NMIMS Mumbai. Her research interests are in the area of Consumer Behaviour, Advertising, and Branding
(Advertising scheduling and placement, Children and Advertisement, Consumer decision-making under pressure of time,
place, and company). She has presented her work at various national and international conferences. Her teaching
interests include Integrated Marketing Communication, Product and Brand Management, Evolution of Consumer
Behaviour, Marketing Management, Technology and Marketing.
Prof. Sonali Jain is an Assistant Professor of Finance at the Department of Management Studies, IIT Delhi. She
completed her Ph.D. from IIM, Ahmedabad, and her B.E. from Delhi University. Her areas of interest include financial
markets, derivatives, and corporate finance.

Baseline Survey Technical Textiles Sector 20042022

Uploaded by

Copyright:

Available Formats

Baseline Survey Technical Textiles Sector 20042022

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Baseline Survey Technical Textiles Sector 20042022

Uploaded by

Copyright:

Available Formats

Technical Textiles

Baseline Study 2020

Section 1 Pg. No.

Section 2 Background and Context to the Study Pg. No.

Section 3 Introduction to Technical Textiles in India Pg. No.

Section 4 Exhaustive List of Technical Textile Products Pg. No.

Section 5 Institutional Consumers of Technical Textiles in India Pg. No.

Section 6 Investments in Technical Textile Industry of India Pg. No.

Section 7 Employment potential of Technical Textiles in India Pg. No.

7.1 Employment scenario in technical textiles 44

Section 8 Major Firms of Indian Technical Textile Industry Pg. No.

Section 9 Domestic & Global Markets of Technical Textiles Pg. No.

Section 10 Leading Countries in Technical Textiles: A Comparison Pg. No.

10.1 Identification of leading countries in technical textiles 166

Section 13 Analysis of Technical Textiles Trade of India Pg. No.

14.1 Export Data 235

Section 15 National and State Policies and Schemes Pg. No.

15.1 Introduction 242

Section 16 Formulation of Indian Standards for Technical Textiles Pg. No.

16.1 Process of development of standards at BIS 277

Section 17 Status and Contribution of Textile Research Associations Pg. No.

Section 18 Status and Contribution of Centres of Excellence in India Pg. No.

19.1 Identification of Premier Centres of Excellence (COEs) 301

Section 20 Technical Textiles Education in India Pg. No.

21.1 Background 336

Section 22 Status and Contribution of Integrated Textile Parks Pg. No.

Section 26 Contribution of Manufacturers’ Associations Pg. No.

Section 27 Stakeholders’ Workshops Pg. No.

Section 29 Recommendations to overcome impediments to growth of Indian Pg. No.

ANNEXURES Pg. No.

Section 9: Domestic and Global markets of Technical Textiles

Section 13: Analysis of Technical Textiles Trade of India

Section 15: National and State Policies and Schemes

Section 16: Formulation of Indian Standards for Technical Textiles

Section 17: Status and Contribution of Textile Research Associations

Section 18: Status and Contribution of Centres of Excellence in India

Section 20: Technical Textiles Education in India

Section 23: Technical Textiles product manufacturing firms: Findings from

Section 26: Contribution of Manufacturers’ Associations

Section 28: Emerging Technologies and Technology Trends in Technical Textiles

Section 5: Institutional Consumers of Technical Textiles in India

Section 7: Employment potential of technical textiles in India

Section 9: Domestic and Global markets of Technical Textiles

Section 10: Leading Countries in Technical Textiles: A Comparison

Section 11: Future demand and Trade expectations in Technical Textiles

Section 12: Attractiveness of different states for technical textile manufacturers

Section 13: Analysis of Technical Textiles Trade of India

Section 14: International Trade of Technical Textiles & India’s contribution

Section 15: National and State Policies and Schemes

Section 16: Formulation of Indian Standards for Technical Textiles

Section 17: Status and Contribution of Textile Research Associations

Section 18: Status and Contribution of Centres of Excellence in India

Section 20: Technical Textiles Education in Academic Institutions and

Section 21: Status and Contribution of Focus Incubation Centres

Section 22: Status and Contribution of Integrated Textile Parks

Section 23: Technical Textiles product manufacturing firms: Findings from

Section 25: Technical Textile Machine Manufacturing Firms: Findings from

Section 26: Contribution of Manufacturers’ Associations

Section 28: Emerging Technologies and Technology Trends in Technical Textiles

1.1 Methodology and Approach