Scribd
Upload
68 views12 pages

Staad Output: St-2A

The document provides the output from a STAAD analysis of a structural model. It includes job information, material properties, member properties, loads defined, load combinations, and analysis results. Key details include the model considers seismic and wind loads based on IBC 2006 code, loads include dead, live, pipe, temperature, and friction loads, and 127 load combinations are defined for strength limit state design checks.

Uploaded by

Saipem Rel2
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
68 views12 pages

Staad Output: St-2A

The document provides the output from a STAAD analysis of a structural model. It includes job information, material properties, member properties, loads defined, load combinations, and analysis results. Key details include the model considers seismic and wind loads based on IBC 2006 code, loads include dead, live, pipe, temperature, and friction loads, and 127 load combinations are defined for strength limit state design checks.

Uploaded by

Saipem Rel2
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 12

STAAD OUTPUT: ST-2A

1. STAAD SPACE
2. START JOB INFORMATION
3. ENGINEER DATE 03-09-2021
4. JOB NAME BU HASA TIE-INS (2021-2025) - PACKAGE 2
5. JOB CLIENT ADNOC ONSHORE
6. JOB NO P12516
7. JOB REV A
8. ENGINEER NAME ASR
9. CHECKER NAME SA
10. END JOB INFORMATION
11. INPUT WIDTH 79
12. UNIT METER KN
13. JOINT COORDINATES
14. 1 -0.75 0.875 0; 4 0 0 0; 5 0.75 0.875 0; 6 0 0.875 0
15. MEMBER INCIDENCES
16. 1 1 6; 2 4 6; 3 6 5
17. *******
18. DEFINE MATERIAL START
19. ISOTROPIC STEEL
20. E 2.05E+008
21. POISSON 0.3
22. DENSITY 76.8195
23. ALPHA 1.2E-005
24. DAMP 0.03
25. TYPE STEEL
26. STRENGTH FY 253200 FU 407800 RY 1.5 RT 1.2
27. END DEFINE MATERIAL
28. ************
29. MEMBER PROPERTY BRITISH
30. 1 TO 3 TABLE ST UC152X152X23
31. CONSTANTS
32. MATERIAL STEEL ALL
33. SUPPORTS
34. 4 FIXED
35. DEFINE IBC 2006
36. SS 0.4 S1 0.12 I 1.25 RX 3.5 RZ 3.5 SCLASS 4 TL 8 FA 1.48 FV 2.32
STAAD SPACE -- PAGE NO. 2

*****************************************************************************
* EQUIV. SEISMIC LOADS AS PER IBC 2006 *
* PARAMETERS CONSIDERED FOR SUBSEQUENT LOAD GENERATION *
* SS = 0.400 S1 = 0.120 FA = 1.480 FV = 2.320 *
* SDS = 0.395 SD1 = 0.186 *
*****************************************************************************

37. SELFWEIGHT 1
38. MEMBER WEIGHT
39. *****CABLE TRAY LOAD ****
40. 1 UNI 2.25 0.3 0.45
41. 3 UNI 2.25 0.05 0.2
42. 3 UNI 2.25 0.3 0.45
43. 1 UNI 2.25 0.55 0.7
44. ***************************************************************
45. DEFINE WIND LOAD
46. TYPE 1 WIND 1
47. INT 1.84 2.44 HEIG 2 5
48. ***************************************************************
49. LOAD 1 LOADTYPE SEISMIC TITLE SEISMIC LOAD X-DIR (SLX)
50. IBC LOAD X 1
51. PERFORM ANALYSIS

PROBLEM STATISTICS
-----------------------------------

NUMBER OF JOINTS 4 NUMBER OF MEMBERS 3


NUMBER OF PLATES 0 NUMBER OF SOLIDS 0
NUMBER OF SURFACES 0 NUMBER OF SUPPORTS 1
SOLVER USED IS THE OUT-OF-CORE BASIC SOLVER

ORIGINAL/FINAL BAND-WIDTH= 3/ 3/ 18 DOF


TOTAL PRIMARY LOAD CASES = 1, TOTAL DEGREES OF FREEDOM = 18
TOTAL LOAD COMBINATION CASES = 0 SO FAR.
SIZE OF STIFFNESS MATRIX = 1 DOUBLE KILO-WORDS
REQRD/AVAIL. DISK SPACE = 12.0/ 0.0 MB

STAAD SPACE -- PAGE NO. 3

************************************************************
* IBC 2006 SEISMIC LOAD ALONG X : *
* CT = 0.072 Cu = 1.529 x = 0.8000 *
* TIME PERIODS : *
* Ta = 0.065 T = 0.027 Tuser = 0.000 *
* TIME PERIOD USED (T) = 0.027 *
* Cs LIMITS : LOWER = 0.022 UPPER = 2.476 *
* LOAD FACTOR = 1.000 *
* DESIGN BASE SHEAR = 1.000 X 0.141 X 1.88 *
* = 0.27 KN *
************************************************************

52. CHANGE
53. ***************************************************************
54. LOAD 2 LOADTYPE SEISMIC TITLE SEISMIC LOAD Z-DIR (SLZ)
55. IBC LOAD Z 1
56. PERFORM ANALYSIS

************************************************************
* IBC 2006 SEISMIC LOAD ALONG Z : *
* CT = 0.072 Cu = 1.529 x = 0.8000 *
* TIME PERIODS : *
* Ta = 0.065 T = 0.046 Tuser = 0.000 *
* TIME PERIOD USED (T) = 0.046 *
* Cs LIMITS : LOWER = 0.022 UPPER = 1.453 *
* LOAD FACTOR = 1.000 *
* DESIGN BASE SHEAR = 1.000 X 0.141 X 1.88 *
* = 0.27 KN *
************************************************************

57. CHANGE
58. ***************************************************************
59. LOAD 3 LOADTYPE DEAD TITLE DEAD LOAD (D.L)
60. SELFWEIGHT Y -1.15
61. MEMBER LOAD
62. *****CABLE TRAY LOAD ****
63. 1 UNI GY -2.25 0.3 0.45
64. 3 UNI GY -2.25 0.05 0.2
65. 3 UNI GY -2.25 0.3 0.45
66. 1 UNI GY -2.25 0.55 0.7
67. ***************************************************************
STAAD SPACE -- PAGE NO. 4

68. LOAD 4 LOADTYPE LIVE TITLE LIVE LOAD (L.L)


69. ***************************************************************
70. LOAD 5 LOADTYPE FLUIDS TITLE PIPE EMPTY LOAD (P.E)
71. ***************************************************************
72. LOAD 6 LOADTYPE FLUIDS TITLE PIPE OPERATING LOAD (P.O)
73. MEMBER LOAD
74. *****CABLE TRAY LOAD ****
75. 1 UNI GY -2.25 0.3 0.45
76. 3 UNI GY -2.25 0.05 0.2
77. 3 UNI GY -2.25 0.3 0.45
78. 1 UNI GY -2.25 0.55 0.7
79. ***************************************************************
80. LOAD 7 LOADTYPE FLUIDS TITLE PIPE HYDROTEST LOAD (P.H)
81. ***************************************************************
82. LOAD 8 LOADTYPE WIND TITLE WIND LOAD (WL+X)
83. WIND LOAD X 1 TYPE 1 XR -3 3 YR 0 2 ZR -3 3 OPEN
84. MEMBER LOAD
85. 1 CON GX 0.28 0.3
86. ***************************************************************
87. LOAD 9 LOADTYPE WIND TITLE WIND LOAD (WL+Z)
88. WIND LOAD Z 1 TYPE 1 XR -3 3 YR 0 2 ZR -3 3 OPEN
89. MEMBER LOAD
90. 1 CON GZ 0.001 0.3
91. ***************************************************************
92. LOAD 10 LOADTYPE WIND TITLE WIND LOAD (WL-X)
93. WIND LOAD X -1 TYPE 1 XR -3 3 YR 0 2 ZR -3 3 OPEN
94. MEMBER LOAD
95. 1 CON GX -0.28 0.3
96. ***************************************************************
97. LOAD 11 LOADTYPE WIND TITLE WIND LOAD (WL-Z)
98. WIND LOAD Z -1 TYPE 1 XR -3 3 YR 0 2 ZR -3 3 OPEN
99. MEMBER LOAD
100. 1 CON GZ -0.001 0.3
101. ***************************************************************
102. ***************************************************************
103. LOAD 12 LOADTYPE TEMPERATURE TITLE FRICTION LOAD FOR PIPE OPERATING (P.F.O+X)
104. ***************************************************************
105. LOAD 13 LOADTYPE TEMPERATURE TITLE FRICTION LOAD FOR PIPE OPERATING (P.F.O+Z)
106. ***************************************************************
107. LOAD 14 LOADTYPE TEMPERATURE TITLE FRICTION LOAD FOR PIPE OPERATING (P.F.O-X)
108. ***************************************************************
109. LOAD 15 LOADTYPE TEMPERATURE TITLE FRICTION LOAD FOR PIPE OPERATING (P.F.O-Z)
110. ***************************************************************
111. LOAD 16 LOADTYPE TEMPERATURE TITLE TEMPERATURE RISE (T.R)
STAAD SPACE -- PAGE NO. 5

112. TEMPERATURE LOAD


113. 1 TO 3 TEMP 40
114. ***************************************************************
115. LOAD 17 LOADTYPE TEMPERATURE TITLE TEMPERATURE FALL (T.F)
116. TEMPERATURE LOAD
117. 1 TO 3 TEMP -40
118. **********************************************
119. **********************************************
120. *****LOAD COMBINATIONS*****
121. *****STRENGTH FACTOR***********
122. *+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*
123. LOAD COMB 101 ( + 1.40 DL + 1.40 PE)
124. 3 1.4 5 1.4
125. *
126. LOAD COMB 102 ( + 1.20 DL + 1.20 PE + 1.20 WL+X)
127. 3 1.2 5 1.2 8 1.2
128. *
129. LOAD COMB 103 ( + 1.20 DL + 1.20 PE + 1.20 WL+Z)
130. 3 1.2 5 1.2 9 1.2
131. *
132. LOAD COMB 104 ( + 1.20 DL + 1.20 PE + 1.20 WL-X)
133. 3 1.2 5 1.2 10 1.2
134. *
135. LOAD COMB 105 ( + 1.20 DL + 1.20 PE + 1.20 WL-Z)
136. 3 1.2 5 1.2 11 1.2
137. *
138. LOAD COMB 106 ( + 1.40 DL + 1.40 PE + 1.20 T.R)
139. 3 1.4 5 1.4 16 1.2
140. *
141. LOAD COMB 107 ( + 1.40 DL + 1.60 PO + 1.60 PD +X + 1.20 T.R)
142. 3 1.4 6 1.6 12 1.6 16 1.2
143. *
144. LOAD COMB 108 ( + 1.40 DL + 1.60 PO + 1.60 PD +Z + 1.20 T.R)
145. 3 1.4 6 1.6 13 1.6 16 1.2
146. *
147. LOAD COMB 109 ( + 1.40 DL + 1.60 PO + 1.60 PD -X + 1.20 T.R)
148. 3 1.4 6 1.6 14 1.6 16 1.2
149. *
150. LOAD COMB 110 ( + 1.40 DL + 1.60 PO + 1.60 PD -Z + 1.20 T.R)
151. 3 1.4 6 1.6 15 1.6 16 1.2
152. *
153. LOAD COMB 111 ( + 1.40 DL + 1.40 PE + 1.20 T.F)
154. 3 1.4 5 1.4 17 1.2
155. *
156. LOAD COMB 112 ( + 1.40 DL + 1.60 PO + 1.60 PD +X + 1.20 T.F)
157. 3 1.4 6 1.6 12 1.6 17 1.2
158. *
159. LOAD COMB 113 ( + 1.40 DL + 1.60 PO + 1.60 PD +Z + 1.20 T.F)
160. 3 1.4 6 1.6 13 1.6 17 1.2
161. *
162. LOAD COMB 114 ( + 1.40 DL + 1.60 PO + 1.60 PD -X + 1.20 T.F)
163. 3 1.4 6 1.6 14 1.6 17 1.2
164. *
165. LOAD COMB 115 ( + 1.40 DL + 1.60 PO + 1.60 PD -Z + 1.20 T.F)
166. 3 1.4 6 1.6 15 1.6 17 1.2
167. *
STAAD SPACE -- PAGE NO. 6

168. LOAD COMB 116 ( + 1.20 DL + 1.20 PE + 1.20 WL+X + 1.20 T.R)
169. 3 1.2 5 1.2 8 1.2 16 1.2
170. *
171. LOAD COMB 117 ( + 1.20 DL + 1.20 PE + 1.20 WL+Z + 1.20 T.R)
172. 3 1.2 5 1.2 9 1.2 16 1.2
173. *
174. LOAD COMB 118 ( + 1.20 DL + 1.20 PE + 1.20 WL-X + 1.20 T.R)
175. 3 1.2 5 1.2 10 1.2 16 1.2
176. *
177. LOAD COMB 119 ( + 1.20 DL + 1.20 PE + 1.20 WL-Z + 1.20 T.R)
178. 3 1.2 5 1.2 11 1.2 16 1.2
179. *
180. LOAD COMB 120 ( + 1.20 DL + 1.20 PE + 1.20 WL+X + 1.20 T.F)
181. 3 1.2 5 1.2 8 1.2 17 1.2
182. *
183. LOAD COMB 121 ( + 1.20 DL + 1.20 PE + 1.20 WL+Z + 1.20 T.F)
184. 3 1.2 5 1.2 9 1.2 17 1.2
185. *
186. LOAD COMB 122 ( + 1.20 DL + 1.20 PE + 1.20 WL-X + 1.20 T.F)
187. 3 1.2 5 1.2 10 1.2 17 1.2
188. *
189. LOAD COMB 123 ( + 1.20 DL + 1.20 PE + 1.20 WL-Z + 1.20 T.F)
190. 3 1.2 5 1.2 11 1.2 17 1.2
191. *
192. LOAD COMB 124 ( + 1.20 DL + 1.20 PO + 1.20 WL+X + 1.20 PD +X + 1.20 T.R)
193. 3 1.2 6 1.2 8 1.2 12 1.2 16 1.2
194. *
195. LOAD COMB 125 ( + 1.20 DL + 1.20 PO + 1.20 WL+Z + 1.20 PD +X + 1.20 T.R)
196. 3 1.2 6 1.2 9 1.2 12 1.2 16 1.2
197. *
198. LOAD COMB 126 ( + 1.20 DL + 1.20 PO + 1.20 WL-X + 1.20 PD +X + 1.20 T.R)
199. 3 1.2 6 1.2 10 1.2 12 1.2 16 1.2
200. *
201. LOAD COMB 127 ( + 1.20 DL + 1.20 PO + 1.20 WL-Z + 1.20 PD +X + 1.20 T.R)
202. 3 1.2 6 1.2 11 1.2 12 1.2 16 1.2
203. *
204. LOAD COMB 128 ( + 1.20 DL + 1.20 PO + 1.20 WL+X + 1.20 PD +X + 1.20 T.F)
205. 3 1.2 6 1.2 8 1.2 12 1.2 17 1.2
206. *
207. LOAD COMB 129 ( + 1.20 DL + 1.20 PO + 1.20 WL+Z + 1.20 PD +X + 1.20 T.F)
208. 3 1.2 6 1.2 9 1.2 12 1.2 17 1.2
209. *
210. LOAD COMB 130 ( + 1.20 DL + 1.20 PO + 1.20 WL-X + 1.20 PD +X + 1.20 T.F)
211. 3 1.2 6 1.2 10 1.2 12 1.2 17 1.2
212. *
213. LOAD COMB 131 ( + 1.20 DL + 1.20 PO + 1.20 WL-Z + 1.20 PD +X + 1.20 T.F)
214. 3 1.2 6 1.2 11 1.2 12 1.2 17 1.2
215. *
216. LOAD COMB 132 ( + 1.20 DL + 1.20 PO + 1.20 WL+X + 1.20 PD +Z + 1.20 T.R)
217. 3 1.2 6 1.2 8 1.2 13 1.2 16 1.2
218. *
219. LOAD COMB 133 ( + 1.20 DL + 1.20 PO + 1.20 WL+Z + 1.20 PD +Z + 1.20 T.R)
220. 3 1.2 6 1.2 9 1.2 13 1.2 16 1.2
221. *
222. LOAD COMB 134 ( + 1.20 DL + 1.20 PO + 1.20 WL-X + 1.20 PD +Z + 1.20 T.R)
223. 3 1.2 6 1.2 10 1.2 13 1.2 16 1.2
STAAD SPACE -- PAGE NO. 7

224. *
225. LOAD COMB 135 ( + 1.20 DL + 1.20 PO + 1.20 WL-Z + 1.20 PD +Z + 1.20 T.R)
226. 3 1.2 6 1.2 11 1.2 13 1.2 16 1.2
227. *
228. LOAD COMB 136 ( + 1.20 DL + 1.20 PO + 1.20 WL+X + 1.20 PD +Z + 1.20 T.F)
229. 3 1.2 6 1.2 8 1.2 13 1.2 17 1.2
230. *
231. LOAD COMB 137 ( + 1.20 DL + 1.20 PO + 1.20 WL+Z + 1.20 PD +Z + 1.20 T.F)
232. 3 1.2 6 1.2 9 1.2 13 1.2 17 1.2
233. *
234. LOAD COMB 138 ( + 1.20 DL + 1.20 PO + 1.20 WL-X + 1.20 PD +Z + 1.20 T.F)
235. 3 1.2 6 1.2 10 1.2 13 1.2 17 1.2
236. *
237. LOAD COMB 139 ( + 1.20 DL + 1.20 PO + 1.20 WL-Z + 1.20 PD +Z + 1.20 T.F)
238. 3 1.2 6 1.2 11 1.2 13 1.2 17 1.2
239. *
240. LOAD COMB 140 ( + 1.20 DL + 1.20 PO + 1.20 WL+X + 1.20 PD -X + 1.20 T.R)
241. 3 1.2 6 1.2 8 1.2 14 1.2 16 1.2
242. *
243. LOAD COMB 141 ( + 1.20 DL + 1.20 PO + 1.20 WL+Z + 1.20 PD -X + 1.20 T.R)
244. 3 1.2 6 1.2 9 1.2 14 1.2 16 1.2
245. *
246. LOAD COMB 142 ( + 1.20 DL + 1.20 PO + 1.20 WL-X + 1.20 PD -X + 1.20 T.R)
247. 3 1.2 6 1.2 10 1.2 14 1.2 16 1.2
248. *
249. LOAD COMB 143 ( + 1.20 DL + 1.20 PO + 1.20 WL-Z + 1.20 PD -X + 1.20 T.R)
250. 3 1.2 6 1.2 11 1.2 14 1.2 16 1.2
251. *
252. LOAD COMB 144 ( + 1.20 DL + 1.20 PO + 1.20 WL+X + 1.20 PD -X + 1.20 T.F)
253. 3 1.2 6 1.2 8 1.2 14 1.2 17 1.2
254. *
255. LOAD COMB 145 ( + 1.20 DL + 1.20 PO + 1.20 WL+Z + 1.20 PD -X + 1.20 T.F)
256. 3 1.2 6 1.2 9 1.2 14 1.2 17 1.2
257. *
258. LOAD COMB 146 ( + 1.20 DL + 1.20 PO + 1.20 WL-X + 1.20 PD -X + 1.20 T.F)
259. 3 1.2 6 1.2 10 1.2 14 1.2 17 1.2
260. *
261. LOAD COMB 147 ( + 1.20 DL + 1.20 PO + 1.20 WL-Z + 1.20 PD -X + 1.20 T.F)
262. 3 1.2 6 1.2 11 1.2 14 1.2 17 1.2
263. *
264. LOAD COMB 148 ( + 1.20 DL + 1.20 PO + 1.20 WL+X + 1.20 PD -Z + 1.20 T.R)
265. 3 1.2 6 1.2 8 1.2 15 1.2 16 1.2
266. *
267. LOAD COMB 149 ( + 1.20 DL + 1.20 PO + 1.20 WL+Z + 1.20 PD -Z + 1.20 T.R)
268. 3 1.2 6 1.2 9 1.2 15 1.2 16 1.2
269. *
270. LOAD COMB 150 ( + 1.20 DL + 1.20 PO + 1.20 WL-X + 1.20 PD -Z + 1.20 T.R)
271. 3 1.2 6 1.2 10 1.2 15 1.2 16 1.2
272. *
273. LOAD COMB 151 ( + 1.20 DL + 1.20 PO + 1.20 WL-Z + 1.20 PD -Z + 1.20 T.R)
274. 3 1.2 6 1.2 11 1.2 15 1.2 16 1.2
275. *
276. LOAD COMB 152 ( + 1.20 DL + 1.20 PO + 1.20 WL+X + 1.20 PD -Z + 1.20 T.F)
277. 3 1.2 6 1.2 8 1.2 15 1.2 17 1.2
278. *
279. LOAD COMB 153 ( + 1.20 DL + 1.20 PO + 1.20 WL+Z + 1.20 PD -Z + 1.20 T.F)
STAAD SPACE -- PAGE NO. 8

280. 3 1.2 6 1.2 9 1.2 15 1.2 17 1.2


281. *
282. LOAD COMB 154 ( + 1.20 DL + 1.20 PO + 1.20 WL-X + 1.20 PD -Z + 1.20 T.F)
283. 3 1.2 6 1.2 10 1.2 15 1.2 17 1.2
284. *
285. LOAD COMB 155 ( + 1.20 DL + 1.20 PO + 1.20 WL-Z + 1.20 PD -Z + 1.20 T.F)
286. 3 1.2 6 1.2 11 1.2 15 1.2 17 1.2
287. *
288. LOAD COMB 156 ( + 1.20 DL + 1.20 PE + 0.60 WL+X + 1.20 T.R)
289. 3 1.2 5 1.2 8 0.6 16 1.2
290. *
291. LOAD COMB 157 ( + 1.20 DL + 1.20 PE + 0.60 WL+Z + 1.20 T.R)
292. 3 1.2 5 1.2 9 0.6 16 1.2
293. *
294. LOAD COMB 158 ( + 1.20 DL + 1.20 PE + 0.60 WL-X + 1.20 T.R)
295. 3 1.2 5 1.2 10 0.6 16 1.2
296. *
297. LOAD COMB 159 ( + 1.20 DL + 1.20 PE + 0.60 WL-Z + 1.20 T.R)
298. 3 1.2 5 1.2 11 0.6 16 1.2
299. *
300. LOAD COMB 160 ( + 1.20 DL + 1.20 PE + 0.60 WL+X + 1.20 T.F)
301. 3 1.2 5 1.2 8 0.6 17 1.2
302. *
303. LOAD COMB 161 ( + 1.20 DL + 1.20 PE + 0.60 WL+Z + 1.20 T.F)
304. 3 1.2 5 1.2 9 0.6 17 1.2
305. *
306. LOAD COMB 162 ( + 1.20 DL + 1.20 PE + 0.60 WL-X + 1.20 T.F)
307. 3 1.2 5 1.2 10 0.6 17 1.2
308. *
309. LOAD COMB 163 ( + 1.20 DL + 1.20 PE + 0.60 WL-Z + 1.20 T.F)
310. 3 1.2 5 1.2 11 0.6 17 1.2
311. *
312. LOAD COMB 164 ( + 1.20 DL + 1.20 PH + 0.60 WL+X + 1.20 T.R)
313. 3 1.2 7 1.2 8 0.6 16 1.2
314. *
315. LOAD COMB 165 ( + 1.20 DL + 1.20 PH + 0.60 WL+Z + 1.20 T.R)
316. 3 1.2 7 1.2 9 0.6 16 1.2
317. *
318. LOAD COMB 166 ( + 1.20 DL + 1.20 PH + 0.60 WL-X + 1.20 T.R)
319. 3 1.2 7 1.2 10 0.6 16 1.2
320. *
321. LOAD COMB 167 ( + 1.20 DL + 1.20 PH + 0.60 WL-Z + 1.20 T.R)
322. 3 1.2 7 1.2 11 0.6 16 1.2
323. *
324. LOAD COMB 168 ( + 1.20 DL + 1.20 PH + 0.60 WL+X + 1.20 T.F)
325. 3 1.2 7 1.2 8 0.6 17 1.2
326. *
327. LOAD COMB 169 ( + 1.20 DL + 1.20 PH + 0.60 WL+Z + 1.20 T.F)
328. 3 1.2 7 1.2 9 0.6 17 1.2
329. *
330. LOAD COMB 170 ( + 1.20 DL + 1.20 PH + 0.60 WL-X + 1.20 T.F)
331. 3 1.2 7 1.2 10 0.6 17 1.2
332. *
333. LOAD COMB 171 ( + 1.20 DL + 1.20 PH + 0.60 WL-Z + 1.20 T.F)
334. 3 1.2 7 1.2 11 0.6 17 1.2
335. *
STAAD SPACE -- PAGE NO. 9

336. LOAD COMB 172 (SLX + 1.20 DL + 1.20 PE)


337. 1 1.0 3 1.2 5 1.2
338. *
339. LOAD COMB 173 ( + SLZ + 1.20 DL + 1.20 PE)
340. 2 1.0 3 1.2 5 1.2
341. *
342. LOAD COMB 174 (SLX + 1.20 DL + PO + PD +X)
343. 1 1.0 3 1.2 6 1.0 12 1.0
344. *
345. LOAD COMB 175 ( + SLZ + 1.20 DL + PO + PD +X)
346. 2 1.0 3 1.2 6 1.0 12 1.0
347. *
348. LOAD COMB 176 (SLX + 1.20 DL + PO + PD +Z)
349. 1 1.0 3 1.2 6 1.0 13 1.0
350. *
351. LOAD COMB 177 ( + SLZ + 1.20 DL + PO + PD +Z)
352. 2 1.0 3 1.2 6 1.0 13 1.0
353. *
354. LOAD COMB 178 (SLX + 1.20 DL + PO + PD -X)
355. 1 1.0 3 1.2 6 1.0 14 1.0
356. *
357. LOAD COMB 179 ( + SLZ + 1.20 DL + PO + PD -X)
358. 2 1.0 3 1.2 6 1.0 14 1.0
359. *
360. LOAD COMB 180 (SLX + 1.20 DL + PO + PD -Z)
361. 1 1.0 3 1.2 6 1.0 15 1.0
362. *
363. LOAD COMB 181 ( + SLZ + 1.20 DL + PO + PD -Z)
364. 2 1.0 3 1.2 6 1.0 15 1.0
365. *
366. LOAD COMB 182 (SLX + 1.20 DL + 1.20 PE)
367. 1 -1.0 3 1.2 5 1.2
368. *
369. LOAD COMB 183 ( - SLZ + 1.20 DL + 1.20 PE)
370. 2 -1.0 3 1.2 5 1.2
371. *
372. LOAD COMB 184 (SLX + 1.20 DL + PO + PD +X)
373. 1 -1.0 3 1.2 6 1.0 12 1.0
374. *
375. LOAD COMB 185 ( - SLZ + 1.20 DL + PO + PD +X)
376. 2 -1.0 3 1.2 6 1.0 12 1.0
377. *
378. LOAD COMB 186 (SLX + 1.20 DL + PO + PD +Z)
379. 1 -1.0 3 1.2 6 1.0 13 1.0
380. *
381. LOAD COMB 187 ( - SLZ + 1.20 DL + PO + PD +Z)
382. 2 -1.0 3 1.2 6 1.0 13 1.0
383. *
384. LOAD COMB 188 (SLX + 1.20 DL + PO + PD -X)
385. 1 -1.0 3 1.2 6 1.0 14 1.0
386. *
387. LOAD COMB 189 ( - SLZ + 1.20 DL + PO + PD -X)
388. 2 -1.0 3 1.2 6 1.0 14 1.0
389. *
390. LOAD COMB 190 (SLX + 1.20 DL + PO + PD -Z)
391. 1 -1.0 3 1.2 6 1.0 15 1.0
STAAD SPACE -- PAGE NO. 10

392. *
393. LOAD COMB 191 ( - SLZ + 1.20 DL + PO + PD -Z)
394. 2 -1.0 3 1.2 6 1.0 15 1.0
395. *******************************
396. *+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*
397. * ----- LOAD COMBINATION ----- *
398. *+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*
399. *+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*
400. * -----SERVICEABILITY ----- *
401. *+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*
402. LOAD COMB 201 ( + DL + PE + WL+X)
403. 3 1.0 5 1.0 8 1.0
404. *
405. LOAD COMB 202 ( + DL + PE + WL+Z)
406. 3 1.0 5 1.0 9 1.0
407. *
408. LOAD COMB 203 ( + DL + PE + WL-X)
409. 3 1.0 5 1.0 10 1.0
410. *
411. LOAD COMB 204 ( + DL + PE + WL-Z)
412. 3 1.0 5 1.0 11 1.0
413. *
414. LOAD COMB 205 ( + DL + PE + T.R)
415. 3 1.0 5 1.0 16 1.0
416. *
417. LOAD COMB 206 ( + DL + PE + T.F)
418. 3 1.0 5 1.0 17 1.0
419. *
420. LOAD COMB 207 ( + DL + PO + PD +X + T.R)
421. 3 1.0 6 1.0 12 1.0 16 1.0
422. *
423. LOAD COMB 208 ( + DL + PO + PD +X + T.F)
424. 3 1.0 6 1.0 12 1.0 17 1.0
425. *
426. LOAD COMB 209 ( + DL + PO + PD +Z + T.R)
427. 3 1.0 6 1.0 13 1.0 16 1.0
428. *
429. LOAD COMB 210 ( + DL + PO + PD +Z + T.F)
430. 3 1.0 6 1.0 13 1.0 17 1.0
431. *
432. LOAD COMB 211 ( + DL + PO + PD -X + T.R)
433. 3 1.0 6 1.0 14 1.0 16 1.0
434. *
435. LOAD COMB 212 ( + DL + PO + PD -X + T.F)
436. 3 1.0 6 1.0 14 1.0 17 1.0
437. *
438. LOAD COMB 213 ( + DL + PO + PD -Z + T.R)
439. 3 1.0 6 1.0 15 1.0 16 1.0
440. *
441. LOAD COMB 214 ( + DL + PO + PD -Z + T.F)
442. 3 1.0 6 1.0 15 1.0 17 1.0
443. *
444. LOAD COMB 215 ( + DL + PE + WL+X + T.R)
445. 3 1.0 5 1.0 8 1.0 16 1.0
446. *
447. LOAD COMB 216 ( + DL + PE + WL+Z + T.R)
STAAD SPACE -- PAGE NO. 11

448. 3 1.0 5 1.0 9 1.0 16 1.0


449. *
450. LOAD COMB 217 ( + DL + PE + WL-X + T.R)
451. 3 1.0 5 1.0 10 1.0 16 1.0
452. *
453. LOAD COMB 218 ( + DL + PE + WL-Z + T.R)
454. 3 1.0 5 1.0 11 1.0 16 1.0
455. *
456. LOAD COMB 219 ( + DL + PE + WL+X + T.F)
457. 3 1.0 5 1.0 8 1.0 17 1.0
458. *
459. LOAD COMB 220 ( + DL + PE + WL+Z + T.F)
460. 3 1.0 5 1.0 9 1.0 17 1.0
461. *
462. LOAD COMB 221 ( + DL + PE + WL-X + T.F)
463. 3 1.0 5 1.0 10 1.0 17 1.0
464. *
465. LOAD COMB 222 ( + DL + PE + WL-Z + T.F)
466. 3 1.0 5 1.0 11 1.0 17 1.0
467. *
468. LOAD COMB 223 ( + DL + PO + WL+X + PD +X + T.R)
469. 3 1.0 6 1.0 8 1.0 12 1.0 16 1.0
470. *
471. LOAD COMB 224 ( + DL + PO + WL+Z + PD +X + T.R)
472. 3 1.0 6 1.0 9 1.0 12 1.0 16 1.0
473. *
474. LOAD COMB 225 ( + DL + PO + WL-X + PD +X + T.R)
475. 3 1.0 6 1.0 10 1.0 12 1.0 16 1.0
476. *
477. LOAD COMB 226 ( + DL + PO + WL-Z + PD +X + T.R)
478. 3 1.0 6 1.0 11 1.0 12 1.0 16 1.0
479. *
480. LOAD COMB 227 ( + DL + PO + WL+X + PD +X + T.F)
481. 3 1.0 6 1.0 8 1.0 12 1.0 17 1.0
482. *
483. LOAD COMB 228 ( + DL + PO + WL+Z + PD +X + T.F)
484. 3 1.0 6 1.0 9 1.0 12 1.0 17 1.0
485. *
486. LOAD COMB 229 ( + DL + PO + WL-X + PD +X + T.F)
487. 3 1.0 6 1.0 10 1.0 12 1.0 17 1.0
488. *
489. LOAD COMB 230 ( + DL + PO + WL-Z + PD +X + T.F)
490. 3 1.0 6 1.0 11 1.0 12 1.0 17 1.0
491. *
492. LOAD COMB 231 ( + DL + PO + WL+X + PD +Z + T.R)
493. 3 1.0 6 1.0 8 1.0 13 1.0 16 1.0
494. *
495. LOAD COMB 232 ( + DL + PO + WL+Z + PD +Z + T.R)
496. 3 1.0 6 1.0 9 1.0 13 1.0 16 1.0
497. *
498. LOAD COMB 233 ( + DL + PO + WL-X + PD +Z + T.R)
499. 3 1.0 6 1.0 10 1.0 13 1.0 16 1.0
500. *
501. LOAD COMB 234 ( + DL + PO + WL-Z + PD +Z + T.R)
502. 3 1.0 6 1.0 11 1.0 13 1.0 16 1.0
503. *
STAAD SPACE -- PAGE NO. 12

504. LOAD COMB 235 ( + DL + PO + WL+X + PD +Z + T.F)


505. 3 1.0 6 1.0 8 1.0 13 1.0 17 1.0
506. *
507. LOAD COMB 236 ( + DL + PO + WL+Z + PD +Z + T.F)
508. 3 1.0 6 1.0 9 1.0 13 1.0 17 1.0
509. *
510. LOAD COMB 237 ( + DL + PO + WL-X + PD +Z + T.F)
511. 3 1.0 6 1.0 10 1.0 13 1.0 17 1.0
512. *
513. LOAD COMB 238 ( + DL + PO + WL-Z + PD +Z + T.F)
514. 3 1.0 6 1.0 11 1.0 13 1.0 17 1.0
515. *
516. LOAD COMB 239 ( + DL + PO + WL+X + PD -X + T.R)
517. 3 1.0 6 1.0 8 1.0 14 1.0 16 1.0
518. *
519. LOAD COMB 240 ( + DL + PO + WL+Z + PD -X + T.R)
520. 3 1.0 6 1.0 9 1.0 14 1.0 16 1.0
521. *
522. LOAD COMB 241 ( + DL + PO + WL-X + PD -X + T.R)
523. 3 1.0 6 1.0 10 1.0 14 1.0 16 1.0
524. *
525. LOAD COMB 242 ( + DL + PO + WL-Z + PD -X + T.R)
526. 3 1.0 6 1.0 11 1.0 14 1.0 16 1.0
527. *
528. LOAD COMB 243 ( + DL + PO + WL+X + PD -X + T.F)
529. 3 1.0 6 1.0 8 1.0 14 1.0 17 1.0
530. *
531. LOAD COMB 244 ( + DL + PO + WL+Z + PD -X + T.F)
532. 3 1.0 6 1.0 9 1.0 14 1.0 17 1.0
533. *
534. LOAD COMB 245 ( + DL + PO + WL-X + PD -X + T.F)
535. 3 1.0 6 1.0 10 1.0 14 1.0 17 1.0
536. *
537. LOAD COMB 246 ( + DL + PO + WL-Z + PD -X + T.F)
538. 3 1.0 6 1.0 11 1.0 14 1.0 17 1.0
539. *
540. LOAD COMB 247 ( + DL + PO + WL+X + PD -Z + T.R)
541. 3 1.0 6 1.0 8 1.0 15 1.0 16 1.0
542. *
543. LOAD COMB 248 ( + DL + PO + WL+Z + PD -Z + T.R)
544. 3 1.0 6 1.0 9 1.0 15 1.0 16 1.0
545. *
546. LOAD COMB 249 ( + DL + PO + WL-X + PD -Z + T.R)
547. 3 1.0 6 1.0 10 1.0 15 1.0 16 1.0
548. *
549. LOAD COMB 250 ( + DL + PO + WL-Z + PD -Z + T.R)
550. 3 1.0 6 1.0 11 1.0 15 1.0 16 1.0
551. *
552. LOAD COMB 251 ( + DL + PO + WL+X + PD -Z + T.F)
553. 3 1.0 6 1.0 8 1.0 15 1.0 17 1.0
554. *
555. LOAD COMB 252 ( + DL + PO + WL+Z + PD -Z + T.F)
556. 3 1.0 6 1.0 9 1.0 15 1.0 17 1.0
557. *
558. LOAD COMB 253 ( + DL + PO + WL-X + PD -Z + T.F)
559. 3 1.0 6 1.0 10 1.0 15 1.0 17 1.0
STAAD SPACE -- PAGE NO. 13

560. *
561. LOAD COMB 254 ( + DL + PO + WL-Z + PD -Z + T.F)
562. 3 1.0 6 1.0 11 1.0 15 1.0 17 1.0
563. *
564. LOAD COMB 255 ( + DL + PH + WL+X)
565. 3 1.0 7 1.0 8 1.0
566. *
567. LOAD COMB 256 ( + DL + PH + WL+Z)
568. 3 1.0 7 1.0 9 1.0
569. *
570. LOAD COMB 257 ( + DL + PH + WL-X)
571. 3 1.0 7 1.0 10 1.0
572. *
573. LOAD COMB 258 ( + DL + PH + WL-Z)
574. 3 1.0 7 1.0 11 1.0
575. *
576. LOAD COMB 259 (0.70 SLX + DL + PE)
577. 1 0.7 3 1.0 5 1.0
578. *
579. LOAD COMB 260 ( + 0.70 SLZ + DL + PE)
580. 2 0.7 3 1.0 5 1.0
581. *
582. LOAD COMB 261 (0.70 SLX + DL + PO + PD +X)
583. 1 0.7 3 1.0 6 1.0 12 1.0
584. *
585. LOAD COMB 262 ( + 0.70 SLZ + DL + PO + PD +X)
586. 2 0.7 3 1.0 6 1.0 12 1.0
587. *
588. LOAD COMB 263 (0.70 SLX + DL + PO + PD +Z)
589. 1 0.7 3 1.0 6 1.0 13 1.0
590. *
591. LOAD COMB 264 ( + 0.70 SLZ + DL + PO + PD +Z)
592. 2 0.7 3 1.0 6 1.0 13 1.0
593. *
594. LOAD COMB 265 (0.70 SLX + DL + PO + PD -X)
595. 1 0.7 3 1.0 6 1.0 14 1.0
596. *
597. LOAD COMB 266 ( + 0.70 SLZ + DL + PO + PD -X)
598. 2 0.7 3 1.0 6 1.0 14 1.0
599. *
600. LOAD COMB 267 (0.70 SLX + DL + PO + PD -Z)
601. 1 0.7 3 1.0 6 1.0 15 1.0
602. *
603. LOAD COMB 268 ( + 0.70 SLZ + DL + PO + PD -Z)
604. 2 0.7 3 1.0 6 1.0 15 1.0
605. *
606. LOAD COMB 269 (0.70 SLX + DL + PE)
607. 1 -0.7 3 1.0 5 1.0
608. *
609. LOAD COMB 270 ( - 0.70 SLZ + DL + PE)
610. 2 -0.7 3 1.0 5 1.0
611. *
612. LOAD COMB 271 (0.70 SLX + DL + PO + PD +X)
613. 1 -0.7 3 1.0 6 1.0 12 1.0
614. *
615. LOAD COMB 272 ( - 0.70 SLZ + DL + PO + PD +X)
STAAD SPACE -- PAGE NO. 14

616. 2 -0.7 3 1.0 6 1.0 12 1.0


617. *
618. LOAD COMB 273 (0.70 SLX + DL + PO + PD +Z)
619. 1 -0.7 3 1.0 6 1.0 13 1.0
620. *
621. LOAD COMB 274 ( - 0.70 SLZ + DL + PO + PD +Z)
622. 2 -0.7 3 1.0 6 1.0 13 1.0
623. *
624. LOAD COMB 275 (0.70 SLX + DL + PO + PD -X)
625. 1 -0.7 3 1.0 6 1.0 14 1.0
626. *
627. LOAD COMB 276 ( - 0.70 SLZ + DL + PO + PD -X)
628. 2 -0.7 3 1.0 6 1.0 14 1.0
629. *
630. LOAD COMB 277 (0.70 SLX + DL + PO + PD -Z)
631. 1 -0.7 3 1.0 6 1.0 15 1.0
632. *
633. LOAD COMB 278 ( - 0.70 SLZ + DL + PO + PD -Z)
634. 2 -0.7 3 1.0 6 1.0 15 1.0
635. *******************************************************************************
636. *******************************************************************************
637. PERFORM ANALYSIS

638. ***********************************
639. DEFINE ENVELOPE
640. 101 TO 191 ENVELOPE 1 TYPE STRENGTH
641. 201 TO 278 ENVELOPE 2 TYPE SERVICEABILITY
642. END DEFINE ENVELOPE
643. ****************************
644. PARAMETER 2
645. CODE BS5950
646. PY 275000 ALL
647. KY 2 ALL
648. KZ 2 ALL
649. DFF 300 ALL
650. MAIN 1 ALL
651. TRACK 0 ALL
652. LOAD LIST ENV 2
653. CHECK CODE ALL
STEEL DESIGN

STAAD.Pro CODE CHECKING - (BSI )


***********************

PROGRAM CODE REVISION V2.13_5950-1_2000


STAAD SPACE -- PAGE NO. 15

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/


FX MY MZ LOCATION
=======================================================================

1 ST UC152X152X23 PASS BS-4.8.3.3.2 0.013 224


0.00 0.08 0.41 -
2 ST UC152X152X23 PASS BS-4.8.3.3.2 0.029 224
3.31 C 0.48 0.00 -
3 ST UC152X152X23 PASS BS-4.8.3.2 0.012 224
0.00 0.08 0.41 0.00

************** END OF TABULATED RESULT OF DESIGN **************

654. *****************
655. PARAMETER 1
656. CODE BS5950
657. PY 275000 ALL
658. RATIO 0.85 ALL
659. TRACK 0 ALL
660. LOAD LIST ENV 1
661. CHECK CODE ALL
STEEL DESIGN

STAAD.Pro CODE CHECKING - (BSI )


***********************

PROGRAM CODE REVISION V2.13_5950-1_2000


STAAD SPACE -- PAGE NO. 16

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/


FX MY MZ LOCATION
=======================================================================

1 ST UC152X152X23 PASS BS-4.2.3-(Y) 0.016 107


0.00 0.00 -0.61 0.75
2 ST UC152X152X23 PASS BS-4.8.3.3.2 0.035 125
3.98 C 0.57 0.00 -
3 ST UC152X152X23 PASS BS-4.2.3-(Y) 0.016 107
0.00 0.00 0.61 0.00

************** END OF TABULATED RESULT OF DESIGN **************

662. *****************
663. STEEL MEMBER TAKE OFF ALL
STAAD SPACE -- PAGE NO. 17

STEEL TAKE OFF


STEEL TAKE-OFF
--------------

PROFILE LENGTH(METE) WEIGHT(KN )

ST UC152X152X23 2.38 0.533


----------------
TOTAL = 0.533

MEMBER PROFILE LENGTH WEIGHT


(METE) (KN )

1 ST UC152X152X23 0.75 0.168


2 ST UC152X152X23 0.88 0.196
3 ST UC152X152X23 0.75 0.168
----------------
TOTAL = 0.533

************ END OF DATA FROM INTERNAL STORAGE ************

664. FINISH

You might also like