QC Manager /E&I QC Supervisor Raziq Ullah

(Aramco Approved)
ISO 9001 2015 CERTIFIED
CBT PASSED
SAP #80011764
E-mail: [email protected] ,

Cell No: +966592105448

OBJECTIVE:-

Believing in hard work & motivation, want to work with an organization providing
healthy environment and opportunity to work as team member, where I can utilize my
knowledge and professional skills with my full devotion.

PERSONAL INFORMATION:

NATIONALITY : PAKISTANI

EDUCATION:-

o University of Engineering & Technology Peshawar, Pakistan

Bachelor of Science in Electrical Engineering,
o Gov. post graduate collage Bannu Pakistan
o Gov. high school No 2 Bannu city Pakistan

MEMBERSHIP:-

o Pakistan Engineering Council (Regd. # ELECT/30176).

o Saudi Engineering council (Membership Id 243439)
o SAP number 80011764

WORK EXPERIENCE: TOTAL 15 YEARS OF EXPERIENCE

Company: - MIA ARABIA .

Designation: - (QC MANAGER )
Period: - JUNE 2022 to PRESENT
 Company: - WABRAN/ NESMA & PARTNER .
Designation: - (QC MANAGER )
Period: - FEB 2021 to May 2022
Project: - MIP7 – Marjan Onshore Water Supply Facilities

Responsibilities Responsibilities :-

o Responsible for all aspects of quality control in an organization. They supervise

the quality control department, which includes handling all personnel and
policies.
o Ensure their teams follow established rules for handling quality control issues;
these rules are meant to address quality issues in a timely manner while retaining
profitability.
o Train new employees in the quality control department on proper testing
procedures and safety habits. Because these supervisors handle day-to-day
quality assurance activities, they are positioned to offer feedback on procedures
and recommend improvements to management. 
o Additionally, implement testing procedures as outlined by their manager and
according to industry standards.
o Responsible and authorize to verify implementation of project of project
drawings, specification and standards.
o Familiar with Schedule Q ,Saudi Aramco standard and other international
standard.
o With equal authority and status in all aspects as the site manager with full
authority to instruct the removal and replacement of any defective work in the
project.
o verify that all test reports from laboratory and field testing complies with the
contract requirements.
o Responsible to issue Non-conformance reports when deviation from contract
requirements are identified during construction of the work, receipt of storage of
material and equipment, fabrication, installation or testing and implement and
maintain a filling system for all QC procedures, records, reports.
o Responsible for the review and retain of the quality records received from the
supplier, manufacturer fabricators and the like to ensure availability of date for
assessment of quality.
o Responsible to maintain quality plan through periodic review to ensure that is
content accurately reflects the requirements of the Saudi Aramco.

Company: - SEPCO ARABIA JIZAN .

Designation:- (E&I QC SUPERVISOR )( Approved)
Period:- Sep 2020 to JANUARY 2021
Project:- JIGCC JIZAN POWER BLOCK 4.
 Responsibilities :-

o Responsible for all aspects of quality control in an organization. They supervise

the quality control department, which includes handling all personnel and
policies.
o Ensure their teams follow established rules for handling quality control issues;
these rules are meant to address quality issues in a timely manner while retaining
profitability.
o Train new employees in the quality control department on proper testing
procedures and safety habits. Because these supervisors handle day-to-day
quality assurance activities, they are positioned to offer feedback on procedures
and recommend improvements to management. 
o Additionally, implement testing procedures as outlined by their manager and
according to industry standards.
o Responsible and authorize to verify implementation of project of project
drawings, specification and standards.
o Familiar with Schedule Q ,Saudi Aramco standard and other international
standard.
o Reporting directly to total quality/cooperate manager and QCM and has
complete authority to take any action necessary to ensure conformance with the
contract documents.
o With equal authority and status in all aspects as the site manager with full
authority to instruct the removal and replacement of any defective work in the
project.
o Responsible for the preparation of all quality control inspection and testing
procedures required of the implementation of the approved QC program and
conformance with the contract specification.
o Responsible for reviewing all construction drawing to ensure that they contain the
necessary quality related requirements prior to release for construction and
review of all as-built drawing prior to final acceptance and any revision to the
contract spec prior to use.
o Responsible to verify that all test reports from laboratory and field testing
complies with the contract requirements.
o Responsible to issue Non-conformance reports when deviation from contract
requirements are identified during construction of the work, receipt of storage of
material and equipment, fabrication, installation or testing and implement and
maintain a filling system for all QC procedures, records, reports.
o Responsible for the review and retain of the quality records received from the
supplier, manufacturer fabricators and the like to ensure availability of date for
assessment of quality.
Responsible to maintain quality plan through periodic review to ensure that is content
accurately reflects the requirements of the Saudi Aramco.

. Company: - HAIDER SALEH ALHAIDER CONTRACTING

EST
Designation:- QA/QC MANAGER

Period:- 19 JANUARY 2020 JULY 2020

Project:- CONSTRUCTION OF GIRLS COLLAGE.
 Responsibilities :-

o Perform adequacy reviews for flow down of QA requirements to implementing

documents and quality affecting processes.
o Assist in defining/developing Quality Program status indicators, performance
measurements and reporting requirements.
o Assist in development of quality system processes.
o Following the procedure and specification of the client.
o Update the entire document about the relative code.
o Prepare ITP for the project requirements.
o Control site subcontractors strongly.
o Ensure the contractor provides QA/QC procedures, method statements and
current document at the locations where they are to be used (Note: that were
include code/standards referenced in the specifications, method statements and
inspection test plan)
o Ensure the contractor performing inspections, sampling and testing of materials in
accordance with the specified standards and as approved in the inspection test
plan.
o Inspect the on-site and off-site materials to be used in the project, witness field
Tests, conducted by third parties on construction materials to ascertain their
compliance with the specification.
o Conduct and co-ordinate site quality meetings in conjunction with PM.

. Company: - Al-Babtain Contracting Companies.

Designation:- QC Supervisor (Aramco Approved)

(QA/QC Manager )( Approved)
Period:- 2 Feb 2017 to oct Nov 2019
Project:- Fadhili Industrial Support Facilities Saudi Aramco KSA
jubail.

Responsibilities :-

o Responsible for all aspects of quality control in an organization. They supervise

the quality control department, which includes handling all personnel and
policies.
o Ensure their teams follow established rules for handling quality control issues;
these rules are meant to address quality issues in a timely manner while retaining
profitability.
o Train new employees in the quality control department on proper testing
procedures and safety habits. Because these supervisors handle day-to-day
 quality assurance activities, they are positioned to offer feedback on procedures
and recommend improvements to management. 
o Additionally, implement testing procedures as outlined by their manager and
according to industry standards.
o Responsible and authorize to verify implementation of project of project
drawings, specification and standards.
o Familiar with Schedule Q ,Saudi Aramco standard and other international
standard.
o Reporting directly to total quality/cooperate manager and QCM and has
complete authority to take any action necessary to ensure conformance with the
contract documents.
o With equal authority and status in all aspects as the site manager with full
authority to instruct the removal and replacement of any defective work in the
project.
o Responsible for the preparation of all quality control inspection and testing
procedures required of the implementation of the approved QC program and
conformance with the contract specification.
o Responsible for reviewing all construction drawing to ensure that they contain the
necessary quality related requirements prior to release for construction and
review of all as-built drawing prior to final acceptance and any revision to the
contract spec prior to use.
o Responsible to verify that all test reports from laboratory and field testing
complies with the contract requirements.
o Responsible to issue Non-conformance reports when deviation from contract
requirements are identified during construction of the work ,receipt of storage of
material and equipment, fabrication ,installation or testing and implement and
maintain a filling system for all QC procedures ,records, reports.
o Responsible for the review and retain of the quality records received from the
supplier, manufacturer fabricators and the like to ensure availability of date for
assessment of quality.
o Responsible to maintain quality plan through periodic review to ensure that is
content accurately reflects the requirements of the Saudi Aramco.

5. Company: - Al-Babtain Contracting Companies.

Designation:- Quality Control Engineer
Period:- 24 March 2015 to Feb 2017
Project:- Construction of IRQAH 380/132/13.8 KV BSP S/S 9034.
Project :- Connection of al-juba BSP s/s 9701 with 132kv network in
Wadi Al – Dawaser.
.

Responsibilities :-

o Perform adequacy reviews for flow down of QA requirements to implementing

documents and quality affecting processes.
 o Assist in defining/developing Quality Program status indicators, performance
measurements and reporting requirements.
o Assist in development of quality system processes.
o Following the procedure and specification of the client.
o Update the entire document about the relative code.
o Prepare ITP for the project requirements.
o Control site subcontractors strongly.
o Ensure the contractor provides QA/QC procedures, method statements and
current document at the locations where they are to be used (Note: that were
include code/standards referenced in the specifications, method statements and
inspection test plan)
o Ensure the contractor performing inspections, sampling and testing of materials in
accordance with the specified standards and as approved in the inspection test
plan.
o Inspect the on-site and off-site materials to be used in the project, witness field
Tests, conducted by third parties on construction materials to ascertain their
compliance with the specification.
o Conduct and co-ordinate site quality meetings in conjunction with PM.

Project Interface
o Maintaining the Quality management system compliant with statutory,
regulatory requirements and corporate procedures.
o Assist the PM/RE in the preparation of specific Project Quality Plan (PQP).
Assist/support the site team for the effective implementation of quality
managements systems as specified in the PQP.
o Assist PM/RE/site Team for the preparation of contractors operation and
maintenance manual.
o Assist PM/RE in the preparation of check list for As-built drawings.
o Assist the site learns during the Audits and ensure that quality management
systems are implemented effectively.
o Develop and implement project specific filing system as described in the PQP
in conjunction with PM/RE and SOC.
o Maintain the drawing register, transmittal notes, revisions; control of
"construction issue" drawing lists and OM approved drawing lists in
conjunction with PM/RE and soc.
o Develop and carry out Site Surveillance Audit system with the support of site
team. Update, follow up and maintain Nonconformance notices /report log
(issue, actioned and closed)
o Develop effective inspection/assessment strategies and Test plan.

4 . Company: - AZMEEL/ ABU NAYYAN /TUMPANE Contracting Companies

Designation:- Quality Control Engineer
Period:- 25 June 2013 to Jan 2015
Project:- ECP Of JIC Chiller Water Cooling Plant 098-C58 Jubail KSA.

Responsibilities

o Following the procedure and specification of the client.

o Update the entire document about the relative code.
o Prepare ITP for the project requirements.
o Control site subcontractors strongly.
o HVAC System (AHU, FCU, Chillers, Pumps, etc).
o PLU System (GRP Tanks, RO System, Pumps, etc).
o  FF System (NOVEC, FM200, Sprinkler System, Pumps, etc).
o Testing and inspection activities to specific systems.
o Prepare technical documents and ensure that the work was carried in accordance
to the drawings and specifications.
o Installation and supervision of all Electrical related items, i.e. Cabling high and
low voltage, Cable trays and cable ladders, Circuit Breakers, Surge Arrestors CT,
PT. HV, MV & LV Switchgears, Transformers.
o Assist management in with development of Quality Program Plan(s) and
subsequent revisions.
o Perform adequacy reviews for flow down of QA requirements to implementing
documents and quality affecting processes.
o Assist in defining/developing Quality Program status indicators, performance
measurements and reporting requirements.
o Assist in development of quality system processes, i.e., records management and
document control, control of electronic data, software development and control,
etc.
o Installation of cathodic protection, testing and commissioning.
o Reviewing drawing of cathodic protection system.
o Making submittals for cathodic protection.
o Installation ,provision, testing and commission of cathodic protection system
o Evaluation of the Contractors Quality manual in conjunction with the PM/RE.
o Evaluation of the MEP contractors and subcontractors Quality manual in
conjunction with the Discipline engineers.
o Review the contractors Inspection Test Plan and all QA/QC documentations.
o Evaluate the QA/QC system implementation by the contractor on site and ensure
the compliance with their Quality manual.
o Ensure the contractor has a current internal Audit plan/schedule. Conduct Audit
on contractors, subcontractors and suppliers.
o Ensure the contractor have adequate QC personnel on site during all production
shift operations to perform the inspection and tests.
o Ensure the contractor provides QA/QC procedures, method statements and
current document at the locations where they are to be used (Note: that were
include code/standards referenced in the specifications, method statements and
inspection test plan)
o Ensure the contractor performing inspections, sampling and testing of materials in
accordance with the specified standards and as approved in the inspection test
plan.
o Inspect the on-site and off-site materials to be used in the project,
organize/witness field and laboratory Tests, conducted by third parties on
construction materials to ascertain their compliance with the specification.
o Review and comment on submittals, including test results, method statements,
materials and alternate proposals submitted by contractors.
o Review and comment on the contractors testing and commissioning
plan/procedure.
o Conduct and co-ordinate site quality meetings in conjunction with PM/RE.
o Raise non-conformance notices (NCNs)/reports; site inspection notices (SINs)
identify quality deficiencies in conjunction with the PM/RE.
o Review the corrective actions proposed by the contractor, respond/follow ups
and close out procedure.
o Review and respond to the preventive actions proposed by the contractor.
o Check subcontractor’s storage facilities, shades etc; ensure suplier's
recommendations are followed and conformance to above.
o Maintain a Sample room for approved materials in accordance with the contract.
Participate in Mock up inspections/ stage inspections and ascertain that the work
is executed in accordance with the contract document and approved standards.

Project Interface
o Maintaining the Quality management system compliant with statutory,
regulatory requirements and corporate procedures.
o Assist the PM/RE in the preparation of specific Project Quality Plan (PQP).
Assist/support the site team for the effective implementation of quality
managements systems as specified in the PQP.
o Assist PM/RE/site Team for the preparation of contractors operation and
maintenance manual.
o Assist PM/RE in the preparation of check list for As-built drawings.
o Assist the site learns during the Audits and ensure that quality management
systems are implemented effectively.
o Develop and implement project specific filing system as described in the PQP
in conjunction with PM/RE and SOC.
o Maintain the drawing register, transmittal notes, revisions; control of
"construction issue" drawing lists and OM approved drawing lists in
conjunction with PM/RE and soc.
o Develop and carry out Site Surveillance Audit system with the support of site
team. Update, follow up and maintain Nonconformance notices /report log
(issue, actioned and closed)
o Develop effective inspection/assessment strategies and Test plan.
o Analyze current methods of site inspection and provide recommendations for
continuous improvement.
o Review and compile all documents at handing-over for submission to the
Client.
o Assist the PM/RE in compilation of all documents for the issuance of the
Taking-Over Certificate.

3 Company: - China Communication And Contracting Company.

Designation: - Quality control Engineer
Period: - July 2011 to 24 April 2013
Project:- C48 SWC Chiller Plant jubail KSA.

Responsibilities:-

o Application of quality processes in a graded approach to the specific product or

service.
o Participation in the development and review of project documentation.
o Direction and support for procurement activities.
o Application of testing and inspection activities to specific systems.
o Assessment of systems to identify deficiencies and participate in resolution of
issues found.
o Correspondence with Client and Suppliers/Subcontractors.
o Testing and inspection activities to specific systems.
o Installation and supervision of all Electrical related items, i.e. Cabling high and
low voltage, Cable trays and cable ladders, Circuit Breakers, Surge Arrestors CT,
PT. HV, MV & LV Switchgears, Transformers.
o Carry out audits of Contractor & Suppliers/Sub-Suppliers as requested by
Functional Quality Lead Engineer & Project/AVL Audit Schedule. Track status &
closeout of Findings & Corrective Actions/Observations. Maintain the iHub
(electronic document management system) Audit & Corrective Action list. Ensure
actions are satisfactorily implemented with respective KPI' feedback.
o Assist in Ensuring Contractors Quality is in compliance with requirements &
objectives and Contracts & Global Agreements.
o Review/comment/discuss/attend selected Contractor audits to assist verification
of project processes are in compliance.
o Approval of suppliers quality plans and Inspection and test plans (ITP's) To assist
in providing Assurance that all Major Project Common Process requirements are
identified, planned and implemented within the procedures & processes
implemented for the projects.
o Assistance in Maintaining Project Level 1 & 2 Quality Plans & Project quality
documents.
o Attend monthly Assurance meetings with other project and contractor personnel.
o Assistance in maintaining overall audit schedule for Project & Supplier audits.
o Review Supplier quality documents.
o Identify & raise any project quality concerns/observations with Project Quality
Manager.

2 Company: - Multiline Estate Silver Oaks Luxury Apartments.

Designation: - assistant Engineer
Period: - Jan 2009 to May 2011
Project :- Maintenance of Electrical building F10 Islamabad .
Responsibilities:
o Correspondence with Client, Suppliers & Subcontractors.
o Making BOQ of all items (Electrical) for site as per drawing.
o understanding low current system
 o Distribution of three phase power supply.
o Conducting (Slab, Wall, and Surface and floor type).
o Understanding electrical drawings.
o Fixture installation.
o Wiring and circuit distribution.
o Fixing of distribution boards.
o Mains Supply Cables and cable size calculation.
o Testing & commissioning of electrical systems.

1) Company: - WAPDA Pakistan.

Designation: - Site Engineer
Period: - Jan 2007 to 2009.
Project:- Installation of 132 kv substation.

Major Projects Handled:-

o Installation of Current & Potential Transformers, Isolators, Breakers & Capacitor

Banks.
o Maintenance of Power Transformers & Their Different Parts.
o Transformer Tests (Open circuit or No-load test, Short circuit or Impedance test).
o Working Principles of Different Control Penal.
o Transformer Relays ( Buckle relay, Tape changer relay, Differential relay,
Distance relay, Winding temperature relay, Oil temperature relay, Low oil level
alarm relay, Over Current and Earth Fault Relay ).
o Power Cables-Normal PVC insulated (1000 MCM, 500 MCM, 4AWG).
o High Voltage Lines Installation & Faults Detection.
o Poles and Tower for Transmission lines (Wooden Poles, Tubular Steel Poles,
Priestesses Concrete Poles, Self Supporting Lattice type Steel Towers).
o Insulators used in HV Transmission Lines (Pin Type, Disc Type, Suspension Type,
and Strain Type).
o Low Tension Insulators (Pin Type, Spool or Shackle Type).
o Working with oil filled, SF6 Gas and Vacuum Insulated Breakers.
o Making a Bus Bar for providing alternate sources of power.
o Having knowledge about the Transmission lines Sag.
o
Responsibilities:

o Providing technical back up from initial enquiry stage to contract completion.

o Review the daily activity report prepared by Supervisor/Foreman.
o Coordinate with the client/customer and inform them the progress of the project.
o Prepare monthly report for the work done/completed and forward to
management for invoicing.
o Maintain the safety measures at the site and ensure all the quality control
regulations.
o Prepare technical documents and ensure that the work was carried in accordance
to the drawings and specifications.
o Execute Electrical Mechanical & Civil Works at Site.
o Installation of valves and well head hook ups.
o Installation & termination of cables.
o Installation of indoor and external lighting systems.
o Installation and Commissioning of solar systems.