TC909A and B,

TC910N and R, TC941A

Eclipse™ Series Intelligent Modules

General
The Honeywell Eclipse™ Series of Intelligent Monitor, Control,
Relay, and Interface Modules use a peer-to-peer, all-digital pro-
tocol that allows for numerous applications, such as fire, secu-
rity, access, and HVAC control. Eclipse provides faster device
response time with more flexibility than possible before. The
Honeywell Eclipse Series is compatible with the Honeywell XLS-
ELCM-320 Eclipse Loop Control Module and the Honeywell
XLS-ELEM-320 Eclipse Loop Expander Module.
When used with the XLS3000, the Eclipse system distributes
intelligence to the networked devices. Additionally, with Eclipse,
no special communication cables are required, making it ideal
for retrofit applications. detectors being monitored must be UL compatible with this mod-
These modules have on-board short-circuit isolators to prevent ule.
shorts on the signaling line circuit (SLC) from disabling all The TC941A1005 has a panel controlled LED indicator. The
devices on the intelligent loop. module also has on-board short circuit isolators to prevent
Eclipse series modules can be used to supervise and activate shorts on the signaling line circuit from disabling more than one
sounders, strobes, door closers, pull stations, waterflow device on the intelligent loop. TC941A1005 is capable of han-
switches, and more. Each module is rigorously designed and dling more than one detector in alarm condition.
tested for electromagnetic compatibility and environmental reli-
CONFIGURATION TOOL
ability, in many cases exceeding industry standards. Full-size
modules mount in a standard 4.0" x 4.0" x 2.125" (102 mm x 102 The EA-CT is a remote control which communicates with
mm x 54 mm) junction box. Wiring terminals are easily accessi- Eclipse devices via infrared signals at line-of-sight distances up
ble for troubleshooting purposes. Relay modules are designed to 30 feet (9 meters). The remote control provides the user with
for activating products connected to an alarm system, and the the ability to communicate with the panel and other devices
mini monitor module can monitor the wiring to the device for through any selected device on the loop. The EA-CT can read
open circuits via an end-of-line resistor. The interface module device information such as type, loop, and address along with
monitors a full zone of two-wire conventional detectors. set loop, address, branch, and service date. It can also initiate a
walk test and a device test. The EA-CT features a 16-character
MONITOR MODULE liquid crystal display and a 17-button keypad.
The TC909A Monitor Modules monitor the normally open con-
tacts of an auxiliary device. In addition to monitoring the contact, Features
the device supervises the wiring to the device for open circuits
• Built-in isolators
via an end-of-line resistor. This device is capable of Class A or
Class B operation. • Distributed intelligence
• Digital communication protocol
MINI MONITOR MODULE • Fast response time
The small size of the TC909B Mini Monitor Module allows it to fit • Numerous applications (fire, security, access,
either inside devices or in junction boxes behind devices. HVAC control)
• Low standby current
SUPERVISED CONTROL MODULE • Wiring terminals easily accessible
The TC910N Supervised Control Modules are used to switch an • Communicate with devices via hand-held configuration tool
external power supply or audio amplifier to notification appli-
ances. The devices supervises the wiring to the auxiliary device
for open and short circuits via an end-of-line resistor. The con-
Module Physical Specifications
trol module also has the capability to monitor the external power Models: TC909A1009 monitor module with isolator;
input for loss of power (DC voltage supplies only). This module TC909B1007 mini-monitor module with isolator; TC910N1007
is capable of Class A or Class B operation. supervised control module with isolator; TC910R1009 relay
module with isolator; TC941A1005 interface module with isola-
RELAY MODULE tor.
The TC910R Relay Modules are designed for use in activation Electrical ratings: voltage range 15 to 30 VDC.
of products that are connected to an intelligent fire alarm sys-
Alarm current:
tem. They provide two sets of Form-C contacts that switch
together (one DPDT relay). There is also an input that is capable – 2.0 mA (red LED ON): TC909A1009, TC909B1007,
of monitoring a dry set of contacts for open or closed conditions. TC910N1007, and TC910R1009
– 2.1 mA (red LED ON): TC941A1005
INTERFACE MODULE
Temperature ratings: 32°F to 120°F (0°C to 49°C).
The TC941A1005 Interface Module is intended for use in intelli-
Humidity ratings: 10% to 93% RH, non-condensing.
gent, two-wire systems. This module allows intelligent panels to
interface and monitor two-wire conventional smoke detectors. It Dimensions: (except mini-module) 4.313" (110 mm) wide x
transmits the status (normal, open, or alarm) of one full zone of 4.25" (108 mm) high x 1.25" (32 mm) deep.
conventional detectors back to the control panel. All two-wire SLC compatibility: XLS-ELCM-320 and XLS-ELEM-320
Eclipse Loop Control/Expander Modules.
Shipping weight: 8 oz. (227g). Temperature Range: 32°F to 120°F (0°C to 49°C).
Humidity: 10% to 93% Non-condensing.
Module Electrical Ratings Dimensions: 4.5" H x 4" W x 1.25" D (Mounts to a 4.0" x 4.0" x
2.125".
TC910N SUPERVISED CONTROL MODULE
Accesssories: 3.9kOhm End of Line Resistor; Wall Cover Plate
WITH ISOLATOR
(included); Surface Mount Electrical Box.
Standby current average: 560 μA maximum average (continu-
Mounting: The module mounts directly to a 4-inch square eletri-
ous broadcasts).
cal box with a minimum depth of 2 1/8 inches.
External power supply: 9 to 80 VDC (normal range); 0 to 2
VDC (trouble range).
EA-CT Physical Specifications
End-of-line resistance: 39K ohms (included).
Temperature ratings: 32°F to 122°F (0°C to 50°C).
Maximum NAC wiring resistance: 100 ohms.
Humidity ratings: 10% to 90% RH, non-condensing.
Maximum NAC current rating:
Communication range: up to 30 feet (9 meters).
– Class B wiring: 3.0 A.
Battery life: 168 hours (typical usage).
– Class A wiring: 2.0 A.
Dimensions: 2.25" (57 mm) wide x 1.313" (33 mm) high x 7.75"
TC910R RELAY MODULE WITH ISOLATOR (197 mm) deep.
Standby current average: 500 μA maximum average (continu-
ous broadcasts). Agency Listings and Approvals
Dry-contact short-circuit current: 30 μA maximum average. The listings and approvals below apply to the Eclipse Series
Relay contact ratings: 3.0 A @ 30 VDC resistive, non-coded; Intelligent Monitor, Control, and Relay Modules. In some cases,
2.0 A @ 30 VDC resistive, coded; 0.9 A @ 70.7 VAC resistive, certain modules or applications may not be listed by certain
non-coded; 0.7 A @ 70.7 VAC inductive (PF = 35), non-coded. approval agencies, or listing may be in process. Consult factory
for latest listing status.
TC909A MONITOR MODULE, TC909B MINI-MONITOR
• UL: S470
MODULE WITH ISOLATOR • CSFM: 7300-1130:0282
Standby current average: 485 μA maximum (continuous • City of Chicago
broadcasts). • MEA
IDC voltage: 5.4 VDC maximum.
Maximum NAC wiring resistance: 100 ohms. Product Line Information
TC941A ZONE INTERFACE MODULE TC909A1009: Eclipse Series monitor module with isolator.
Normal Operating Voltage: 15 to 30 VDC. TC909B1007: Eclipse Series mini monitor module with isolator.
Maximum Red LED Current Draw: 1.6 mA. TC910N1007: Eclipse Series supervised control module with
isolator.
Average Operating Current: 500 μA (LED flashing, 30 VDC,
continuous broadcasts). TC910R1009: Eclipse Series relay module with isolator.
EOL Resistance: 3.9K Ohms. TC941A1005: Eclipse Series interface module with isolator.
Maximum IDC wiring resistance: 25 Ohms. EA-CT: Eclipse Series configuration tool (requires two “AA” bat-
teries, not included).
IDC Supply Voltage (between terminals T7 and T8):
CB500: Control module barrier.
– Regulated DC Voltage: 24 VDC power limited.
SMB500: Surface-mount box.
– Ripple Voltage: 0.1 Volts RMS maximum.
– Current: 90mA per module

This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific
applications or anticipate all requirements. All specifications are subject to change without notice.
Eclipse™ is a registered trademark of Honeywell International Inc.
©2011 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited.

Automation and Control Solutions

Honeywell International Inc. Honeywell Limited-Honeywell Limitée
1985 Douglas Drive North 35 Dynamic Drive
Golden Valley, MN 55422 Scarborough, Ontario M1V 4Z9
www.honeywell.com 74-3987-2 Rev. 06-11
June 2011
Made in the U.S.A.
® U.S. Registered Trademark
© 2011 Honeywell International Inc.
Page 2 of 2