b11usena08.

fm 6 ページ ２０１３年４月１２日　金曜日　午前９時４３分

OUTBACK
SPECIFICATIONS

2. OUTBACK
A: DIMENSION
1. OUTBACK MODEL
Model 2.5L SOHC non-turbo 3.6 L DOHC non-turbo
Overall length mm (in) 4,780 (188.2)
Overall width mm (in) 1,820 (71.7)
Overall height (at C.W.) mm (in) 1,680 (66.1), 1,670 (65.7)*1
Wheelbase mm (in) 2,740 (107.9)
Front mm (in) 1,550 (61.0)
Tread
REAR mm (in) 1,550 (61.0)
Minimum road clearance mm (in) 220 (8.7)
*1:
when crossbar is stored

B: ENGINE
Model 2.5L SOHC non-turbo 3.6 L DOHC non-turbo
Horizontally opposed, liquid cooled, Horizontally opposed, liquid cooled,
Engine type
4-cylinder, 4-stroke gasoline engine 6-cylinder, 4-stroke gasoline engine
Valve arrangement Overhead camshaft
Bore × stroke mm (in) 99.5 × 79.0 (3.917 × 3.110) 92.0 × 91.0 (3.622 × 3.583)
Displacement cm3 (cu in) 2,457 (149.9) 3,630 (221.4)
Compression ratio 10.0 10.5
Ignition order 1—3—2—4 1—6—3—2—5—4
650 (MT)
Idle speed at Park or Neutral position rpm 700
675 (CVT)
Maximum output kW (HP)/rpm 127 (170)/5,600 191 (256)/6,000
Maximum torque N·m (kgf-m, ft-lb)/rpm 230 (23.5, 170)/4,000 334 (34.1, 247)/4,400

C: ELECTRICAL
Model 2.5 L SOHC non-turbo 3.6 L DOHC non-turbo
Ignition timing (at idling) BTDC 10°(MT), 15°(CVT) 15°
Spark plug Type and manufacturer NGK: SIFR6A11 NGK: SILFR6C11
Generator 12 V — 110 A 12 V — 130 A
Type and capacity (5HR) 12 V — 52 AH (75D23R)
Battery
CCA 490 A

SPC-6
11LE_US.book 7 ページ ２０１３年２月１５日　金曜日　午前９時１７分

OUTBACK
SPECIFICATIONS

D: TRANSMISSION
1. MT
Model 2.5L SOHC non-turbo
Transmission type 6MT
Clutch type DSPD
1st 3.454
2nd 1.947
3rd 1.296
Gear ratio 4th 0.972
5th 0.825
6th 0.695
Rev. 3.636
Type of gear Hypoid
Reduction gear (Front)
Gear ratio 4.444
Type of gear Helical
Transfer reduction
Reduction gear Gear ratio 1.000
(Rear) Type of gear Hypoid
Final reduction
Gear ratio 4.444

6MT: 6-forward and 1-reverse speeds with synchromesh for all gears
DSPD: Dry Single Plate Diaphragm

2. AT
Model 3.6 L DOHC non-turbo
Transmission type 5AT
Clutch type TCC
1st 3.540
2nd 2.264
3rd 1.471
Gear ratio
4th 1.000
5th 0.834
Rev. 2.370
Type of gear Helical
1st reduction
Reduction gear Gear ratio 1.000
(Front) Type of gear Hypoid
Final reduction
Gear ratio 3.083
Type of gear Hypoid
Reduction gear (Rear)
Gear ratio 3.083

5AT: Electronically controlled fully-automatic, 5-forward speeds and 1-reverse

SPC-7
11LE_US.book 8 ページ ２０１３年２月１５日　金曜日　午前９時１７分

OUTBACK
SPECIFICATIONS

3. CVT
Model 2.5L SOHC non-turbo
Transmission type CVT
Clutch type TCC
Forward 3.525 — 0.558
Change gear ratio
Rev. 2.358
Type of gear Helical
1st reduction
Reduction gear Gear ratio 1.000
(Front) Type of gear Hypoid
Final reduction
Gear ratio 3.900
Transfer reduction ratio 1.000
Type of gear Hypoid
Reduction gear (Rear)
Gear ratio 3.900

TCC: Torque Converter Clutch

E: STEERING
Model 2.5L SOHC 3.6 L DOHC
Type Rack & pinion
Turns, lock to lock 3.2
Curb to curb 11.0 (36.1)
Minimum turning diameter m (ft)
Wall to wall 11.8 (38.7)

F: SUSPENSION
Front Macpherson strut type suspension
REAR Double wishbone type suspension

G: BRAKE
Model 2.5L SOHC non-turbo 3.6 L DOHC non-turbo
Service brake system Dual circuit hydraulic with vacuum suspended power unit
Front Ventilated disc brake
REAR Disc brake Ventilated disc brake
Parking brake Electric mechanical on rear brakes
Brake assist Standard equipment for all vehicles

H: TIRE
Model 2.5L SOHC non-turbo 3.6 L DOHC non-turbo
16 × 6 1/2JJ
Wheel size 17 × 7J
17 × 7J
P215/70 R16 99S
Tire size P225/60 R17 98T
P225/60 R17 98T
Type Tubeless, Steel belted radial

SPC-8
11LE_US.book 9 ページ ２０１３年２月１５日　金曜日　午前９時１７分

OUTBACK
SPECIFICATIONS

I: CAPACITY
3.6 L DOHC
2.5L SOHC non-turbo
Model non-turbo
6MT CVT 5AT
Fuel tank 2 (US gal, Imp gal) 70 (18.5, 15.4)
Total capacity (at overhaul) 2 (US qt, Imp qt) 4.8 (5.1, 4.2) 4.8 (5.1, 4.2) 7.8 (8.2, 6.9)
When replacing
4.2 (4.4, 3.7) 4.2 (4.4, 3.7) 6.5 (6.9, 5.7)
Engine oil Filling amount of engine oil engine oil and oil filter
2 (US qt, Imp qt) When replacing
4.0 (4.2, 3.5) 6.3 (6.7, 5.5)
engine oil only
Transmission gear oil 2 (US qt, Imp qt) 3.7 (3.9, 3.3) —
12.0 — 12.5
ATF or CVTF 2 (US qt, Imp qt) — (12.7 — 13.2, 9.8 (10.4, 8.6)
10.6 — 11.0)
Front differential gear oil 2 (US qt, Imp qt) — 1.4 (1.5, 1.2)
Rear differential gear oil 2 (US qt, Imp qt) 0.8 (0.8, 0.7)
Power steering fluid 2 (US qt, Imp qt) 0.7 (0.7, 0.6)
Engine coolant 2 (US qt, Imp qt) 6.5 (6.9, 5.7) 6.4 (6.8, 5.6) 6.5 (6.9, 5.7)

SPC-9
11LE_US.book 10 ページ ２０１３年２月１５日　金曜日　午前９時１７分

OUTBACK
SPECIFICATIONS

SPC-10
11LE_US.book 1 ページ ２０１３年２月１５日　金曜日　午前９時１７分

PRECAUTION

PC
Page
1. Precaution ..................................................................................................2