9/8/22, 5:27 PM AISC Steel Connection Design 

                http://asp.civilbay.com/connect                 Splice Connection                 SP-1

 
  Result Summary - Overall Moment Connection - Beam Splice Code=AISC 360-10 ASD

This is a demo version and all steel, bolt and weld electrode's F y  F u  values have been revised from user's actual inputs.
This calculation result shall not be used for verification or commercial use due to the arbitrarily material strength changes.
 
User can click on  Buy Now to buy a license
 
Result Summary - Overall geometries & weld limitations = FAIL limit states max ratio = 0.42 PASS

 
Right Beam geometries & weld limitations = FAIL limit states max ratio = 0.42 PASS

 
Left Beam geometries & weld limitations = FAIL limit states max ratio = 0.42 PASS

  

  Sketch Moment Connection - Beam Splice Code=AISC 360-10 ASD

1/17
9/8/22, 5:27 PM AISC Steel Connection Design                 http://asp.civilbay.com/connect                 Splice Connection                 SP-1

2/17
9/8/22, 5:27 PM AISC Steel Connection Design                 http://asp.civilbay.com/connect                 Splice Connection                 SP-1

3/17
9/8/22, 5:27 PM AISC Steel Connection Design                 http://asp.civilbay.com/connect                 Splice Connection                 SP-1

Members & Components Summary

Right Side Beam Section

W24X76 d = 607 [mm] b f = 228 [mm]

t f = 17 [mm] t w = 11 [mm]

k des = 30 [mm] k det = 40 [mm]

k 1 = 27 [mm] A = 14452 [mm 2]

 
S x = 28.8E5 [mm 3] Z x = 32.8E5 [mm 3]

 
Steel Grade A992 F y = 2852.5 [MPa] F u = 551.6 [MPa]

 
Left Side Beam Section

W24X76 d = 607 [mm] b f = 228 [mm]

t f = 17 [mm] t w = 11 [mm]

k des = 30 [mm] k det = 40 [mm]

2
k 1 = 27 [mm] A = 14452 [mm ]

  3 3
S x = 28.8E5 [mm ] Z x = 32.8E5 [mm ]

 
Steel Grade A992 F y = 2852.5 [MPa] F u = 551.6 [MPa]

 
  

Beam Flange Force Calc

Beam Flange Force

Beam section d b = 607 [mm] t fb = 17 [mm]

Flange force moment arm d m = d b - t fb  = 590 [mm]

User input load axial P bR = -111.2 [kN] moment M R = 81.3 [kN-m]

in tension

Beam flange force - top P f-TR = P bR / 2 + M R / d m  = 82.2 [kN]

Beam flange force - bottom P f-BR = P bR / 2 - M R / d m  = -193.4 [kN]

  
 
  Right Beam Splice MC Connection Code=AISC 360-10 ASD

Result Summary geometries & weld limitations = FAIL limit states max ratio = 0.42 PASS

  

4/17
9/8/22, 5:27 PM AISC Steel Connection Design                 http://asp.civilbay.com/connect                 Splice Connection                 SP-1

Geometry Restriction Checks FAIL

Min Bolt Spacing - End Plate

Bolt diameter d b =   = 30 [mm]

Min bolt spacing allowed L s-min = 2.667 d b  = 80 [mm] AISC 14 th  J3.3

Min Bolt spacing in End Plate L s =   = 100 [mm]

 ≥ L s-min OK

Min Bolt Edge Distance - End Plate

Bolt diameter d b =   = 30 [mm]

Min edge distance allowed L e-min =   = 37 [mm] AISC 14 th  Table J3.4

Min edge distance in End Plate L e =   = 35 [mm]

 < L e-min NG

Max Bolt Edge Distance - End Plate

Connecting plate thickness t p =   = 25 [mm]

Max edge distance allowed L e-max = min ( 12t , 6" )  = 152 [mm] AISC 14 th  J3.5

Max edge distance in End Plate L e =   = 53 [mm]

 ≤ L e-max OK

 
Beam Flange Fillet Weld Limitation PASS

Min Fillet Weld Size

Thinner part joined thickness t =   = 17 [mm]

Min fillet weld size allowed w min =   = 6 [mm] AISC 14 th  Table J2.4

Fillet weld size provided w =   = 8 [mm]

 ≥ w min OK

Min Fillet Weld Length

Fillet weld size provided w =   = 8 [mm]

Min fillet weld length allowed L min = 4 x w  = 32 [mm] AISC 14 th  J2.2b

Min fillet weld length L = 0.5 b fb - k 1b  = 81 [mm]

 ≥ L min OK

 
Beam Web Fillet Weld Limitation PASS

Min Fillet Weld Size

Thinner part joined thickness t =   = 11 [mm]

Min fillet weld size allowed w min =   = 5 [mm] AISC 14 th  Table J2.4

Fillet weld size provided w =   = 8 [mm]

 ≥ w min OK

Min Fillet Weld Length

Fillet weld size provided w =   = 8 [mm]

th
Min fillet weld length allowed L min = 4 x w  = 32 [mm] AISC 14   J2.2b

Min fillet weld length L = 0.5 d b - k b  = 528 [mm]

 ≥ L min OK

  

5/17
9/8/22, 5:27 PM AISC Steel Connection Design                 http://asp.civilbay.com/connect                 Splice Connection                 SP-1

Verify AISC DG4 Bolt No Prying Assumption AISC DG4 Is Used

 
Bolt Moment Strength (No Prying)

bolt grade = A325M-N F t = 744.7 [MPa] AISC 14 th  Table J3.2

bolt dia d b = 30 [mm] bolt area A b = 707 [mm 2]

Bolt norminal tensile strength P t = F t A b  = 526.3 [kN] AISC 14 th  Eq J3-1

Tension bolt moment arm h 1 = 540 [mm]

Bolt moment strength (no prying) M nb = 2 P t h 1  = 568.3 [kN-m] AISC DG16  Table 3-2
th
Bolt safety factor-ASD Ω = 2.00 AISC 14   Eq J3-1

1
M nb =   = 284.1 [kN-m]
Ω

 
End Plate Bending Strength

End plate width b plate = 216 [mm] thickness t p = 25 [mm]

Beam flange width b fb = 228 [mm]

Effective end plate width b p = min ( b plate , b fb + 1" )  = 216 [mm] AISC DG4  Page 9 item 5

End plate yield strength F yp = 413.7 [MPa]

See AISC DG16 Table 3-2 for all formulas to derive the following parameters

Tension bolt moment arm h 1 = 540 [mm]

g = 110 [mm] AISC DG16  Table 3-2

p fi = 41 [mm] p b = 76 [mm]

s = 77 [mm] Y p = 3334 [mm]

Flexure safety factor-ASD Ω b = 1.67 AISC 14 th  F1 (1)

1 1
End plate bending strength M pl =  F yp t 2p Y p  = 515.9 [kN-m] AISC DG16  Table 3-2
Ωb Ωb

 
Max Moment in Demand

1
Moment by bolt strength-no prying M nb = from above calc  = 284.1 [kN-m]
Ωb

Moment by user input M r = from user input  = 81.3 [kN-m]

1 1
Moment in demand M np = min ( M nb , M r )  = 81.3 [kN-m]
Ω Ωb

 
 
Check Thick End Plate Condition

1 1
Check thick end plate condition M pl >= 1.11 X M np AISC DG4  Eq 3.33
Ωb Ω

ratio = 0.17   thick plate

 The thick end plate conditions are met. AISG DG4 is used and no bolt

AISC DG4  Eq 3.33 & 3.35
prying is considered
 
 

6/17
9/8/22, 5:27 PM AISC Steel Connection Design                 http://asp.civilbay.com/connect                 Splice Connection                 SP-1

Bolt Moment Strength (No Prying) ratio = 193.4 / 481.8 = 0.40 PASS

bolt grade = A325M-N F t = 744.7 [MPa] AISC 14 th  Table J3.2

bolt dia d b = 30 [mm] bolt area A b = 707 [mm 2]

Bolt norminal tensile strength P t = F t A b  = 526.3 [kN] AISC 14 th  Eq J3-1

Tension bolt moment arm h 1 = 540 [mm]

Flange force moment arm d m = d b - t fb  = 590 [mm]

Flange force required in tension P af_t = P a  / 2 - M a  / d m  = 193.4 [kN]

Flange force resistance by bolt F n = 2 P t h 1 / d m  = 963.6 [kN] AISC DG16  Table 3-2
th
Bolt safety factor-ASD Ω = 2.00 AISC 14   Eq J3-1

1
F n =   = 481.8 [kN] AISC DG4 Eq 3.7
Ω

ratio = 0.40  > P af_t OK

 
Bolt Shear Strength ratio = 133.4 / 315.8 = 0.42 PASS

Bolt shear stress bolt grade = A325M-N F nv = 446.8 [MPa] AISC 14 th  Table J3.2

bolt dia d b = 30 [mm] bolt area A b = 707 [mm 2]

Number of bolt carried shear n s = 2.0 shear plane m = 1

Bolt group eccentricity coefficient C ec =   = 1.000

Required shear strength V a =   = 133.4 [kN]

Bolt shear strength R n = F nv A b n s m C ec  = 631.6 [kN] AISC 14 th  Eq J3-1

Bolt safety factor-ASD Ω = 2.00 AISC 14 th  Eq J3-1

1
R n =   = 315.8 [kN]
Ω

ratio = 0.42  > V a OK

7/17
9/8/22, 5:27 PM AISC Steel Connection Design                 http://asp.civilbay.com/connect                 Splice Connection                 SP-1

Bolt Bearing/TearOut Strength on End Plate ratio = 133.4 / 315.8 = 0.42 PASS

Single Bolt Shear Strength

Bolt shear stress bolt grade = A325M-N F nv = 446.8 [MPa] AISC 14 th  Table J3.2

bolt dia d b = 30 [mm] bolt area A b = 707 [mm 2]

Single bolt shear strength R n-bolt = F nv A b  = 315.8 [kN] AISC 14 th  Eq J3-1

Bolt Bearing/TearOut Strength on Plate

th
Bolt hole diameter bolt dia d b = 30 [mm] bolt hole dia d h = 32 [mm] AISC 14   Table J3.3

Bolt edge distance edge L e = 35 [mm]

Plate tensile strength F u = 551.6 [MPa]

Plate thickness t = 25 [mm]

Edge Bolt

Bolt hole edge clear distance L c = L e - d h / 2  = 19 [mm]

Bolt tear out/bearing strength R n-t&b-ed = 1.5 L c t F u ≤ 3.0 d b t F u AISC 14 th  Eq J3-6b

 = 395.1 ≤ 1240.7  = 395.1 [kN]

Bolt strength at edge R n-ed = min ( R n-t&b-ed , R n-bolt )  = 315.8 [kN]

Number of bolt edge n ed = 2

Bolt bearing strength for all bolts R n = n ed R n-ed  = 631.6 [kN]

Required shear strength V a =   = 133.4 [kN]

Bolt safety factor-ASD Ω = 2.00 AISC 14 th  J3.10

1
R n =   = 315.8 [kN]
Ω

ratio = 0.42  > V a OK

  

8/17
9/8/22, 5:27 PM AISC Steel Connection Design                 http://asp.civilbay.com/connect                 Splice Connection                 SP-1

End Plate Flexural Yielding ratio = 193.4 / 874.8 = 0.22 PASS

 
End Plate Bending Strength

End plate width b plate = 216 [mm] thickness t p = 25 [mm]

Beam flange width b fb = 228 [mm]

Effective end plate width b p = min ( b plate , b fb + 1" )  = 216 [mm] AISC DG4  Page 9 item 5

End plate yield strength F yp = 413.7 [MPa]

See AISC DG16 Table 3-2 for all formulas to derive the following parameters

Tension bolt moment arm h 1 = 540 [mm]

g = 110 [mm] AISC DG16  Table 3-2

p fi = 41 [mm] p b = 76 [mm]

s = 77 [mm] Y p = 3334 [mm]

Flexure safety factor-ASD Ω b = 1.67 AISC 14 th  F1 (1)

1 1
End plate bending strength M pl =  F yp t 2p Y p  = 515.9 [kN-m] AISC DG16  Table 3-2
Ωb Ωb

Flange force moment arm d m = d b - t fb  = 590 [mm]

Flange force required in tension P af_t = P a  / 2 - M a  / d m  = 193.4 [kN]

Flange force provided by end plate 1 1

R pl =  M pl / d m  = 874.8 [kN] AISC DG4 Eq 3.10
bending Ω Ω

ratio = 0.22  > P af_t OK

 
End Plate Shear Yielding ratio = 193.4 / 895.0 = 0.22 PASS

Flange force required in tension P af_t = P a  / 2 - M a  / d m  = 193.4 [kN]

End plate width b plate = 216 [mm] thickness t p = 25 [mm]

Beam flange width b fb = 228 [mm]

Effective end plate width b p = min ( b plate , b fb + 1" )  = 216 [mm] AISC DG4  Page 9 item 5

Plate Shear Yielding Check

Plate size width b p = 216 [mm] thickness t p = 25 [mm]

Plate yield strength F y = 413.7 [MPa]

Plate gross area in shear A gv = b p t p  = 5409 [mm 2]

Shear force required P af_t =   = 193.4 [kN]

Plate shear yielding strength R n = 0.6 F y A gv  = 1342.5 [kN] AISC 14 th  Eq J4-3

Safety factor-ASD Ω = 1.50 AISC 14 th  Eq J4-3

1
R n =   = 895.0 [kN]
Ω

ratio = 0.22  > P af_t OK

9/17
9/8/22, 5:27 PM AISC Steel Connection Design                 http://asp.civilbay.com/connect                 Splice Connection                 SP-1

End Plate Shear Rupture ratio = 193.4 / 620.6 = 0.31 PASS

Flange force required in tension P af_t = P a  / 2 - M a  / d m  = 193.4 [kN]

End plate width b plate = 216 [mm] thickness t p = 25 [mm]

Beam flange width b fb = 228 [mm]

Effective end plate width b p = min ( b plate , b fb + 1" )  = 216 [mm] AISC DG4  Page 9 item 5

Plate Shear Rupture Check

th
Bolt hole diameter bolt dia d b = 30 [mm] bolt hole dia d h = 33 [mm] AISC 14   B4.3b

Number of bolt n = 2

Plate size width b p = 216 [mm] thickness t p = 25 [mm]

Plate tensile strength F u = 551.6 [MPa]

2
Plate net area in shear A nv = ( b p - n d h ) t p  = 3750 [mm ]

Shear force required P af_t =   = 193.4 [kN]

th
Plate shear rupture strength R n = 0.6 F u A nv  = 1241.2 [kN] AISC 14   Eq J4-4
th
Safety factor-ASD Ω = 2.00 AISC 14   Eq J4-4

1
R n =   = 620.6 [kN]
Ω

ratio = 0.31  > P af_t OK

  

Beam Flange Weld Strength ratio = 193.4 / 479.3 = 0.40 PASS

Flange force required in tension P af_t = P a  / 2 - M a  / d m  = 193.4 [kN]

Fillet weld length - double fillet L = [b fb + ( b fb - 2k 1b )] /2 as dbl fillet  = 189 [mm]

 
Fillet Weld Strength Check

Fillet weld leg size w = 8 [mm] load angle θ = 90.0 [°]
th
Electrode strength F EXX = 551.6 [MPa] strength coeff C 1 = 1.03 AISC 14   Table 8-3

Number of weld line n = 2   for double fillet

1.5 th
Load angle coefficient C 2 = ( 1 + 0.5 sin θ)  = 1.50 AISC 14   Page 8-9
th
Fillet weld shear strength R n-w = 0.6 (C 1 x 70 ksi) 0.707 w n C 2  = 5.06 [kN/mm] AISC 14   Eq 8-1

Base metal - beam flange thickness t = 17 [mm] tensile F u = 551.6 [MPa]
th
Base metal - beam flange is in tension, tensile rupture as per AISC 14   Eq J4-2 is checked AISC 14 th  J2.4

Base metal tensile rupture R n-b = F u t  = 9.53 [kN/mm] AISC 14 th  Eq J4-2

Double fillet linear shear strength R n = min ( R n-w , R n-b )  = 5.06 [kN/mm] AISC 14 th  Eq 9-2

 
Safety factor-ASD Ω = 2.00 AISC 14 th  Eq 8-1

1
R n =   = 2.53 [kN/mm]
Ω

Weld resistance required P af_t =   = 193.4 [kN]

Fillet weld length - double fillet L =   = 189 [mm]

1 1
Weld resistance provided F n =  Rn x L  = 479.3 [kN]
Ω Ω

ratio = 0.40  > P af_t OK

  

10/17
9/8/22, 5:27 PM AISC Steel Connection Design                 http://asp.civilbay.com/connect                 Splice Connection                 SP-1
 
  Left Beam Splice MC Connection Code=AISC 360-10 ASD

Result Summary geometries & weld limitations = FAIL limit states max ratio = 0.42 PASS

  

Geometry Restriction Checks FAIL

Min Bolt Spacing - End Plate

Bolt diameter d b =   = 30 [mm]

Min bolt spacing allowed L s-min = 2.667 d b  = 80 [mm] AISC 14 th  J3.3

Min Bolt spacing in End Plate L s =   = 100 [mm]

 ≥ L s-min OK

Min Bolt Edge Distance - End Plate

Bolt diameter d b =   = 30 [mm]

Min edge distance allowed L e-min =   = 37 [mm] AISC 14 th  Table J3.4

Min edge distance in End Plate L e =   = 35 [mm]

 < L e-min NG

Max Bolt Edge Distance - End Plate

Connecting plate thickness t p =   = 25 [mm]

Max edge distance allowed L e-max = min ( 12t , 6" )  = 152 [mm] AISC 14 th  J3.5

Max edge distance in End Plate L e =   = 53 [mm]

 ≤ L e-max OK

 
Beam Flange Fillet Weld Limitation PASS

Min Fillet Weld Size

Thinner part joined thickness t =   = 17 [mm]

Min fillet weld size allowed w min =   = 6 [mm] AISC 14 th  Table J2.4

Fillet weld size provided w =   = 8 [mm]

 ≥ w min OK

Min Fillet Weld Length

Fillet weld size provided w =   = 8 [mm]

Min fillet weld length allowed L min = 4 x w  = 32 [mm] AISC 14 th  J2.2b

Min fillet weld length L = 0.5 b fb - k 1b  = 81 [mm]

 ≥ L min OK

 
Beam Web Fillet Weld Limitation PASS

Min Fillet Weld Size

Thinner part joined thickness t =   = 11 [mm]

Min fillet weld size allowed w min =   = 5 [mm] AISC 14 th  Table J2.4

Fillet weld size provided w =   = 8 [mm]

 ≥ w min OK

Min Fillet Weld Length

Fillet weld size provided w =   = 8 [mm]

th
Min fillet weld length allowed L min = 4 x w  = 32 [mm] AISC 14   J2.2b

Min fillet weld length L = 0.5 d b - k b  = 528 [mm]

 ≥ L min OK

11/17
9/8/22, 5:27 PM AISC Steel Connection Design                 http://asp.civilbay.com/connect                 Splice Connection                 SP-1
  

Verify AISC DG4 Bolt No Prying Assumption AISC DG4 Is Used

 
Bolt Moment Strength (No Prying)

bolt grade = A325M-N F t = 744.7 [MPa] AISC 14 th  Table J3.2

bolt dia d b = 30 [mm] bolt area A b = 707 [mm 2]

Bolt norminal tensile strength P t = F t A b  = 526.3 [kN] AISC 14 th  Eq J3-1

Tension bolt moment arm h 1 = 540 [mm]

Bolt moment strength (no prying) M nb = 2 P t h 1  = 568.3 [kN-m] AISC DG16  Table 3-2
th
Bolt safety factor-ASD Ω = 2.00 AISC 14   Eq J3-1

1
M nb =   = 284.1 [kN-m]
Ω

 
End Plate Bending Strength

End plate width b plate = 216 [mm] thickness t p = 25 [mm]

Beam flange width b fb = 228 [mm]

Effective end plate width b p = min ( b plate , b fb + 1" )  = 216 [mm] AISC DG4  Page 9 item 5

End plate yield strength F yp = 413.7 [MPa]

See AISC DG16 Table 3-2 for all formulas to derive the following parameters

Tension bolt moment arm h 1 = 540 [mm]

g = 110 [mm] AISC DG16  Table 3-2

p fi = 41 [mm] p b = 76 [mm]

s = 77 [mm] Y p = 3334 [mm]

Flexure safety factor-ASD Ω b = 1.67 AISC 14 th  F1 (1)

1 1
End plate bending strength M pl =  F yp t 2p Y p  = 515.9 [kN-m] AISC DG16  Table 3-2
Ωb Ωb

 
Max Moment in Demand

1
Moment by bolt strength-no prying M nb = from above calc  = 284.1 [kN-m]
Ωb

Moment by user input M r = from user input  = 81.3 [kN-m]

1 1
Moment in demand M np = min ( M nb , M r )  = 81.3 [kN-m]
Ω Ωb

 
 
Check Thick End Plate Condition

1 1
Check thick end plate condition M pl >= 1.11 X M np AISC DG4  Eq 3.33
Ωb Ω

ratio = 0.17   thick plate

 The thick end plate conditions are met. AISG DG4 is used and no bolt

AISC DG4  Eq 3.33 & 3.35
prying is considered
 
 

12/17
9/8/22, 5:27 PM AISC Steel Connection Design                 http://asp.civilbay.com/connect                 Splice Connection                 SP-1

Bolt Moment Strength (No Prying) ratio = 193.4 / 481.8 = 0.40 PASS

bolt grade = A325M-N F t = 744.7 [MPa] AISC 14 th  Table J3.2

bolt dia d b = 30 [mm] bolt area A b = 707 [mm 2]

Bolt norminal tensile strength P t = F t A b  = 526.3 [kN] AISC 14 th  Eq J3-1

Tension bolt moment arm h 1 = 540 [mm]

Flange force moment arm d m = d b - t fb  = 590 [mm]

Flange force required in tension P af_t = P a  / 2 - M a  / d m  = 193.4 [kN]

Flange force resistance by bolt F n = 2 P t h 1 / d m  = 963.6 [kN] AISC DG16  Table 3-2
th
Bolt safety factor-ASD Ω = 2.00 AISC 14   Eq J3-1

1
F n =   = 481.8 [kN] AISC DG4 Eq 3.7
Ω

ratio = 0.40  > P af_t OK

 
Bolt Shear Strength ratio = 133.4 / 315.8 = 0.42 PASS

Bolt shear stress bolt grade = A325M-N F nv = 446.8 [MPa] AISC 14 th  Table J3.2

bolt dia d b = 30 [mm] bolt area A b = 707 [mm 2]

Number of bolt carried shear n s = 2.0 shear plane m = 1

Bolt group eccentricity coefficient C ec =   = 1.000

Required shear strength V a =   = 133.4 [kN]

Bolt shear strength R n = F nv A b n s m C ec  = 631.6 [kN] AISC 14 th  Eq J3-1

Bolt safety factor-ASD Ω = 2.00 AISC 14 th  Eq J3-1

1
R n =   = 315.8 [kN]
Ω

ratio = 0.42  > V a OK

13/17
9/8/22, 5:27 PM AISC Steel Connection Design                 http://asp.civilbay.com/connect                 Splice Connection                 SP-1

Bolt Bearing/TearOut Strength on End Plate ratio = 133.4 / 315.8 = 0.42 PASS

Single Bolt Shear Strength

Bolt shear stress bolt grade = A325M-N F nv = 446.8 [MPa] AISC 14 th  Table J3.2

bolt dia d b = 30 [mm] bolt area A b = 707 [mm 2]

Single bolt shear strength R n-bolt = F nv A b  = 315.8 [kN] AISC 14 th  Eq J3-1

Bolt Bearing/TearOut Strength on Plate

th
Bolt hole diameter bolt dia d b = 30 [mm] bolt hole dia d h = 32 [mm] AISC 14   Table J3.3

Bolt edge distance edge L e = 35 [mm]

Plate tensile strength F u = 551.6 [MPa]

Plate thickness t = 25 [mm]

Edge Bolt

Bolt hole edge clear distance L c = L e - d h / 2  = 19 [mm]

Bolt tear out/bearing strength R n-t&b-ed = 1.5 L c t F u ≤ 3.0 d b t F u AISC 14 th  Eq J3-6b

 = 395.1 ≤ 1240.7  = 395.1 [kN]

Bolt strength at edge R n-ed = min ( R n-t&b-ed , R n-bolt )  = 315.8 [kN]

Number of bolt edge n ed = 2

Bolt bearing strength for all bolts R n = n ed R n-ed  = 631.6 [kN]

Required shear strength V a =   = 133.4 [kN]

Bolt safety factor-ASD Ω = 2.00 AISC 14 th  J3.10

1
R n =   = 315.8 [kN]
Ω

ratio = 0.42  > V a OK

  

14/17
9/8/22, 5:27 PM AISC Steel Connection Design                 http://asp.civilbay.com/connect                 Splice Connection                 SP-1

End Plate Flexural Yielding ratio = 193.4 / 874.8 = 0.22 PASS

 
End Plate Bending Strength

End plate width b plate = 216 [mm] thickness t p = 25 [mm]

Beam flange width b fb = 228 [mm]

Effective end plate width b p = min ( b plate , b fb + 1" )  = 216 [mm] AISC DG4  Page 9 item 5

End plate yield strength F yp = 413.7 [MPa]

See AISC DG16 Table 3-2 for all formulas to derive the following parameters

Tension bolt moment arm h 1 = 540 [mm]

g = 110 [mm] AISC DG16  Table 3-2

p fi = 41 [mm] p b = 76 [mm]

s = 77 [mm] Y p = 3334 [mm]

Flexure safety factor-ASD Ω b = 1.67 AISC 14 th  F1 (1)

1 1
End plate bending strength M pl =  F yp t 2p Y p  = 515.9 [kN-m] AISC DG16  Table 3-2
Ωb Ωb

Flange force moment arm d m = d b - t fb  = 590 [mm]

Flange force required in tension P af_t = P a  / 2 - M a  / d m  = 193.4 [kN]

Flange force provided by end plate 1 1

R pl =  M pl / d m  = 874.8 [kN] AISC DG4 Eq 3.10
bending Ω Ω

ratio = 0.22  > P af_t OK

 
End Plate Shear Yielding ratio = 193.4 / 895.0 = 0.22 PASS

Flange force required in tension P af_t = P a  / 2 - M a  / d m  = 193.4 [kN]

End plate width b plate = 216 [mm] thickness t p = 25 [mm]

Beam flange width b fb = 228 [mm]

Effective end plate width b p = min ( b plate , b fb + 1" )  = 216 [mm] AISC DG4  Page 9 item 5

Plate Shear Yielding Check

Plate size width b p = 216 [mm] thickness t p = 25 [mm]

Plate yield strength F y = 413.7 [MPa]

Plate gross area in shear A gv = b p t p  = 5409 [mm 2]

Shear force required P af_t =   = 193.4 [kN]

Plate shear yielding strength R n = 0.6 F y A gv  = 1342.5 [kN] AISC 14 th  Eq J4-3

Safety factor-ASD Ω = 1.50 AISC 14 th  Eq J4-3

1
R n =   = 895.0 [kN]
Ω

ratio = 0.22  > P af_t OK

15/17
9/8/22, 5:27 PM AISC Steel Connection Design                 http://asp.civilbay.com/connect                 Splice Connection                 SP-1

End Plate Shear Rupture ratio = 193.4 / 620.6 = 0.31 PASS

Flange force required in tension P af_t = P a  / 2 - M a  / d m  = 193.4 [kN]

End plate width b plate = 216 [mm] thickness t p = 25 [mm]

Beam flange width b fb = 228 [mm]

Effective end plate width b p = min ( b plate , b fb + 1" )  = 216 [mm] AISC DG4  Page 9 item 5

Plate Shear Rupture Check

th
Bolt hole diameter bolt dia d b = 30 [mm] bolt hole dia d h = 33 [mm] AISC 14   B4.3b

Number of bolt n = 2

Plate size width b p = 216 [mm] thickness t p = 25 [mm]

Plate tensile strength F u = 551.6 [MPa]

2
Plate net area in shear A nv = ( b p - n d h ) t p  = 3750 [mm ]

Shear force required P af_t =   = 193.4 [kN]

th
Plate shear rupture strength R n = 0.6 F u A nv  = 1241.2 [kN] AISC 14   Eq J4-4
th
Safety factor-ASD Ω = 2.00 AISC 14   Eq J4-4

1
R n =   = 620.6 [kN]
Ω

ratio = 0.31  > P af_t OK

  

Beam Flange Weld Strength ratio = 193.4 / 479.3 = 0.40 PASS

Flange force required in tension P af_t = P a  / 2 - M a  / d m  = 193.4 [kN]

Fillet weld length - double fillet L = [b fb + ( b fb - 2k 1b )] /2 as dbl fillet  = 189 [mm]

 
Fillet Weld Strength Check

Fillet weld leg size w = 8 [mm] load angle θ = 90.0 [°]
th
Electrode strength F EXX = 551.6 [MPa] strength coeff C 1 = 1.03 AISC 14   Table 8-3

Number of weld line n = 2   for double fillet

1.5 th
Load angle coefficient C 2 = ( 1 + 0.5 sin θ)  = 1.50 AISC 14   Page 8-9
th
Fillet weld shear strength R n-w = 0.6 (C 1 x 70 ksi) 0.707 w n C 2  = 5.06 [kN/mm] AISC 14   Eq 8-1

Base metal - beam flange thickness t = 17 [mm] tensile F u = 551.6 [MPa]
th
Base metal - beam flange is in tension, tensile rupture as per AISC 14   Eq J4-2 is checked AISC 14 th  J2.4

Base metal tensile rupture R n-b = F u t  = 9.53 [kN/mm] AISC 14 th  Eq J4-2

Double fillet linear shear strength R n = min ( R n-w , R n-b )  = 5.06 [kN/mm] AISC 14 th  Eq 9-2

 
Safety factor-ASD Ω = 2.00 AISC 14 th  Eq 8-1

1
R n =   = 2.53 [kN/mm]
Ω

Weld resistance required P af_t =   = 193.4 [kN]

Fillet weld length - double fillet L =   = 189 [mm]

1 1
Weld resistance provided F n =  Rn x L  = 479.3 [kN]
Ω Ω

ratio = 0.40  > P af_t OK

  

16/17
9/8/22, 5:27 PM AISC Steel Connection Design                 http://asp.civilbay.com/connect                 Splice Connection                 SP-1

17/17