Scribd
Upload
46 views1 page

Part 777

This drawing shows a fixture for a servo motor with key dimensions. It includes two cylindrical holes of different diameters that pass completely through the fixture, with one hole located at an angled position. Additional holes and slots are included. The material is specified as SAE 304/303 stainless steel with a surface roughness of N7 and break edges of 0.2mm.

Uploaded by

Omri Agai
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
46 views1 page

Part 777

This drawing shows a fixture for a servo motor with key dimensions. It includes two cylindrical holes of different diameters that pass completely through the fixture, with one hole located at an angled position. Additional holes and slots are included. The material is specified as SAE 304/303 stainless steel with a surface roughness of N7 and break edges of 0.2mm.

Uploaded by

Omri Agai
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

M8x1.

25 through all
R5.00
9.5
R2.00 R5.0 A

16.0
8.0

40.0
15.5
R6.05 A
2.00
5.0 15.0
20.0
M5x0.8 through all

SECTION A-A
SCALE 1 : 1

TOLERANCE : (unless otherwise specified) MATERIAL: TREATMENT: FINISH:


PLCS
MM
DEG.
.X
0.2
2
.XX
0.05
1
.XXX
0.01
0.5
SAE 304/303
SURFACE ROUGHNESS: DRAWING NAME: Catalog No.
N7
( )
N6 Break sharp edges 0.2 mm
remove all burrs
servo motor fixture
DRAWING No.
NAME DATE SIGN PROJECT NAME: Equashield REV:

Designed Omri.A Equashield Medical LTD B


SCALE: SIZE:
2:1 A4
Z:\‫\נדב‬Part777

Drawn Omri.A P.O. Box 12 TEFEN , Zip Code: 24959


Approved Tel: 972-4-9873737, Fax:972-4-9873001 SHEET 1 OF 1 DIM. mm
THIS DRAWING CONTAINED PROPRIETARY INFORMATION AND IS NOT BE USED OR REPRODUCED WITHOUT THE PERMISSION OF "EQUASHIELD MEDICAL Ltd''.

You might also like