Scribd
Upload
98 views4 pages

CCNA Question-Aug 2022

The document contains questions about networking concepts including network layers, devices, protocols, addressing, and security. It asks about the functions of layer 3 devices and layer 2 switches. Questions are also asked about router and switch configuration like interface types, passwords, and protocols. Network services, protocols, and tools are covered such as DHCP, SNMP, OSPF, EIGRP, ACLs, NAT, and network automation. Wireless LAN concepts, routing protocols, switching, and network monitoring are also addressed.

Uploaded by

riya varghese
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
98 views4 pages

CCNA Question-Aug 2022

The document contains questions about networking concepts including network layers, devices, protocols, addressing, and security. It asks about the functions of layer 3 devices and layer 2 switches. Questions are also asked about router and switch configuration like interface types, passwords, and protocols. Network services, protocols, and tools are covered such as DHCP, SNMP, OSPF, EIGRP, ACLs, NAT, and network automation. Wireless LAN concepts, routing protocols, switching, and network monitoring are also addressed.

Uploaded by

riya varghese
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

1. Define Network?

2. Differentiate User Mode from Privileged Mode.

3. What is the primary function of a Layer 3 device?

a. to transmit wireless traffic between hosts

b. to analyze traffic and drop unauthorized traffic from the Internet

c. to forward traffic within the same broadcast domain

d. to pass traffic between different networks

4. What are two functions of a Layer 2 switch? (Choose two.)

a. acts as a central point for association and authentication servers

b. selects the best route between networks on a WAN

c. moves packets within a VLAN

d. moves packets between different VLANs

e. makes forwarding decisions based on the MAC address of a packet

5. On which default interface have you configured an IP address for a switch?

a. int fa0/0

b.int vty 0 15

c.int vlan 1

d.int s/0/0

6. Explain difference between Router, Switch and Hub ?  

7. You run ipconfig on your Windows system and see an IPv6 address that starts FE80.
What type of address is this?

a. Link local

b. Multicast

c. Anycast

d. Global unicast

8. What is the range of class C address?


9. What is POE (Power over Ethernet)?

10.What is a peer-peer process?

11. Explain difference between straight and crossover cable with examples?

12. Define the terms Unicasting, Multicasting and Broadcasting and Any-casting?

13.Difference between CSMA/CD and CSMA/CA?

14. What are the different memories used in a CISCO router?

15. What are the different types of passwords used in securing a CISCO router?

16.What is the use of “Service Password Encryption”?

17.what is AS (Autonomous System)?


18. What is the difference between Private IP and Public IP?
19. What is DHCP?
20. What is the reason for getting APIPA address?
21. What is the range of APIPA address?
22. What is the purpose of relay agent?
23. What is ARP?
24.What is SNMP?
25. What is Internet Control Message Protocol?
26.Differentiate full-duplex from half-duplex ?
27.What is RIP?
28. What is EIGRP?
29. What are the different tables in EIGRP?
30. What are different Types of ACL?
31. Difference between Inbound Access-list and Outbound Access-list?
32.What is NAT?
33. What is Dynamic NAT?
34. What is Port Address Translation (Overloading)?
35. What is the use of Spanning Tree Protocol (STP)?
36. What is Inter-Vlan Routing?
37. What is VTP?
38. What are IBSS and BSS?
39. Why WPA encryption is preferred over WEP?
40. What is the use of HSRP?
41. What are the tools used for network automation
42. How to install the stable release of paramiko in ubuntu server
43. PIP denotes?
44. How to know the PIP version installed in our ubutnu server
45. What is the user of SFTP
46. How to configure SFTP in our base machine
47. What is Wi-Fi?
48. What is a Wi-Fi hotspot?
49. What are the four OSPF router types?
50. What is Dynamic NAT?
51. What is Port Address Translation (Overloading)?
52. What is the difference between STP and RSTP?
53. Explain the function of layer 2 switching?
54.What is Sub Interface?
55.How Root bridge is elected?
56. What are the different STP port states?
57. Explain types of STP Port Roles?
58. What is Rapid-PVST+?
59.What is OSPF Routing Protocol?
60.Define Ether channel?
61.Ping is used for?
62.What is the purpose of the ICMP protocol
63.Port number of SSH, Telnet, HTTP, POP3, SMTP, MYSQL, DNS and DHCP
64.What is on prem machine and virtual machine
65 .Any of the two network monitoring tools available in the market

You might also like