W-Im iOT Module Datasheet

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

W-im Series

iOT
Industrial Modem

W-im Series modems are designed to provide connectivity across a broad


range of M2M and IoT applications. They allow Internet connectivity via
Modubus Port to PLCs, Meters, HMIs etc. They help transporting data from
any industrial device to data control servers, allowing businesses to benefit
from real-time data monitoring, management and control. In built battery
feature is the first of its kind in such module makes it more durable during
power loss.

Supports Inbuilt Ios


2G, 3G, 4G, LTE Rs485 Connectivity

Built-in Lithium Battery No need of


8hr Backup* Static IP

Smart Oil & Gas Industrial M2M


Metering Monitoring Automation Communication

Key Benefits
- LTE Cat 4 Module optimized for M2M and IoT applications
- Worldwide LTE, UMTS/HSPA and GSM/GPRS/EDGE coverage
- Supports DFOTA, eCALL and DTMF
- MIMO technology meets demands for data rate and link reliability in modem wireless communication
systems

VOLTEK ENGINEERING
Unit No:2, Samanvay,
Shree Industrial Mill Estate,
Gomtipur, Rakhial Road, [email protected]
Ahmedabad - 380021 www.voltekengineering.com
Specifications

Material : MS Powder Coated


Dimensions : 45mm x 16mm x 50mm (H x W x D)
Weight : 0.2kg
Operating : -35 Deg C to 50 Deg C
Temperature
MCU : ARM® Cortex™-M0 core
24 bit system timer, up to 50MHz
Flash Memory : 32K/64K/128K Flash for Program Code
4KB for ISP Loader, 512 Byte Page Erase for Flash
Supports 2-Wire ICP Update through SWD/ICE Interface
Supports fast parallel programming mode
SRAM Memory : 8K/16K byte embedded SRAM
Supports PDMA Mode
PDMA : Supports 9 Channel PDMA for automatic data transfer
Supports CRC calculation with four common polynomials
Clock Control : Flexible selection for different applications
Built-in 22.1184 MHZ high speed oscillator
Built in 10Khz low speed oscillator for watchdog timer
GPIO : Four IO Modes:
Quasi-bidirectional
Push-pull output
Open-drain output
Input only with high impedence
TTL/Schmitt trigger input selectable
I/O pin configured as interrupt source
RTC : Built-in RTC Counter
Selectable 12-hour or 24-hour mode
Support wake-up function
ADC : 12 bit SAR ADC with 760 kSPS
Up to 8-ch single end input or 4-ch differential input
Smart Card Host : Compliant to ISO-7816-3
Supports up to three ISO-7816-3 ports
Special Features : 96-bit unique ID
Built-in Temperature Sensor
All Green package(RoHS)
LQFP 100-pin / 64-pin / 48-pin
Frequency Bands :

LTE-FDD : B1/B3/B5/B7/B8/B20
LTE-TDD : B38/B40/B41
WCDMA : B1/B5/B8
GSM/EDGE : B3/B8
GNSS : GPS/GLONASS/Compass/Galileo/QZSS

Data Transmission :

LTE-FDD Data Rate (Mbps) : 150 (DL)/ 50 (UL)


LTE-TDD Data Rate (Mbps) : 130 (DL)/ 30 (UL)
DC-HSPA+ Data Rate(Mbps) : 42 (DL)/ 5.76 (UL)
WCDMA Date Rate (kbps) : 384 (DL)/ 384 (UL)
EDGE Data Rate (kbps) : 296 (DL)/ 236.8 (UL)
GPRS Data Rate (Kbps) : 107 (DL)/ 85.6 (UL)

VOLTEK ENGINEERING
Unit No:2, Samanvay,
Shree Industrial Mill Estate,
Gomtipur, Rakhial Road, [email protected]
Ahmedabad - 380021 www.voltekengineering.com
Specifications

Interfaces: : MS sheet Powder Coated


(U)SIM : x1
UART : x1
USB 2.0 : x1
Audio Digital(PCM) : x1
I2C : x1
SDIO : x2
SGMII : x1
Bluetooth : x1
ADC : x2

Voice:
Speech Codec Modes : HR/FR/EFR/AMR/AMR-WB
Echo Arithmetic : Echo Cancellation/Noise Suppression
VoLTE : Digital Audio and VoLTE (Optional)

Power : 15 VDC to 25VDC


Ios : 2 Digital Inputs - 24VDC
2 Analogue Inputs - 12 bit Resolution
SIM : mini-SIM held in tray
Operating Status LEDs : 5 LEDs for Power, Cellular, SIM status

Termination Diagram & Dimensions

69.48
50mmmm 29.12
16mmmm

Analog input
83.57 mm

Module Configuration
45mm

- GPRS Module
RS485 Connection Termination
+
Diagram
+ DC
Digital Inputs

24VDC Supply
+ DC

VOLTEK ENGINEERING
Unit No:2, Samanvay,
Shree Industrial Mill Estate,
Gomtipur, Rakhial Road, [email protected]
Ahmedabad - 380021 www.voltekengineering.com

You might also like