The TX-2B/RX-2B is a pair of CMOS LSIs designed to control the functions (forward, backward, right, left, turbo) of a remote controlled car using a transmitter and receiver. The transmitter has five control keys that encode signals to activate the corresponding functions. The receiver decodes the signals and outputs them to control the car's motions. The LSIs require few external components and have features like a wide operating voltage range and low power consumption.
The TX-2B/RX-2B is a pair of CMOS LSIs designed to control the functions (forward, backward, right, left, turbo) of a remote controlled car using a transmitter and receiver. The transmitter has five control keys that encode signals to activate the corresponding functions. The receiver decodes the signals and outputs them to control the car's motions. The LSIs require few external components and have features like a wide operating voltage range and low power consumption.
The TX-2B/RX-2B is a pair of CMOS LSIs designed to control the functions (forward, backward, right, left, turbo) of a remote controlled car using a transmitter and receiver. The transmitter has five control keys that encode signals to activate the corresponding functions. The receiver decodes the signals and outputs them to control the car's motions. The LSIs require few external components and have features like a wide operating voltage range and low power consumption.
The TX-2B/RX-2B is a pair of CMOS LSIs designed to control the functions (forward, backward, right, left, turbo) of a remote controlled car using a transmitter and receiver. The transmitter has five control keys that encode signals to activate the corresponding functions. The receiver decodes the signals and outputs them to control the car's motions. The LSIs require few external components and have features like a wide operating voltage range and low power consumption.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
You are on page 1/ 10
Silan Semiconductors
REMOTE CONTROLLER WITH FIVE FUNCTIONS
DESCRIPTION The TX-2B/RX-2B is a pair of CMOS LSIs designed for remote controlled car applications. The TX-2B/RX-2B has five control keys for controlling the motions (i.e. forward, backward, rightward, leftward and the turbo function ) of the remote controlled car.
TX-2B/RX-2B
DIP-14 TX-2B
FEATURES * Wide operating voltage range (VCC=1.5~5.0V) * Low stand-by current * Auto-power-off function for TX-2B * Few external components are needed
RX-2B
DIP-16
ORDERING INFORMATION Part No. TX-2B RX-2B
Package DIP-14-300-2.54 DIP-16-300-2.54
BLOCK DIAGRAM FOSC TEST B
13 OSCI
12 Oscillator 11 Timing Generator
OSCO
RIGHT
1 14 6 5 4 3 GND
9 VDD
LEFT
10 PC Latch Circuit Encoding Circuit Logic 8 SO 7 SC
Operating Voltage Operating Current O/P Driving Current O/P Sinking Current Effect Decoding Frequency Variation
Symbol VDD IDD Idrive Isink Ftolerance
Min 1.5 -1 1 -20
Typ 4.0 -----
Max 5.0 3.0 --20
Unit V mA mA mA %
PIN DESCRIPTION 1. TX-2B Pin No. 1 2 3 4 5
Symbol RIGHT TEST GND BACKWARD FORWARD
Description The rightward function will be selected, if this pin is connected to GND This pin is used for testing mode Negative power supply The backward function will be selected, if this pin is connected to GND The forward function will be selected, if this pin is connected to GND (To be continued)
The turbo function will be selected if this pin is connected to GND Output pin of the encoding signal with carrier frequency Output pin of the encoding signal without carrier frequency Positive power supply Power control output pin Oscillator output pin Oscillator input pin This pin is used for testing mode The leftward function will be selected, if this pin is connected to GND
Symbol VO2 GND SI OSCI OSCO RIGHT LEFT ROB LDB BACKWARD FORWARD TURBO VDD VI1 VO1 VI2 Negative power supply Input pin of the encoding signal Oscillator input pin Oscillator output pin Rightward output pin Leftward output pin
Description Inverter 2 output pin for power amplify
Rightward function disable, if this pin is connected to GND Leftward function disable, if this pin is connected to GND Backward output pin Forward output pin TURBO output pin Positive power supply Inverter 1 input pin for power amplify Inverter 1 output pin for power amplify Inverter 2 input pin for power amplify
TESTING CIRCUIT (The oscillator frequency of TX-2B, RX-2B is 128KHz, the oscillator resistor is 160K and 250K respectively) forward turbo fosc=128kHz backward 12 11 10 9 5 6 7 8 right
